/** ALTRO data map */
kAltroMap = 0x20, // Altro channel map
/** Strip Range */
- kStripRange = 0x40 //Strip range
-
+ kStripRange = 0x40 //Strip range,
};
-
+ enum {
+ kAll = (kPulseGain|kPedestal|kDeadMap|kSampleRate|
+ kZeroSuppression|kAltroMap|kStripRange)
+ };
+
/** Singleton access
@return single to */
static AliFMDParameters* Instance();
/** Initialize the manager. This tries to read the parameters from
CDB. If that fails, the class uses the hard-coded parameters.
*/
- void Init(Bool_t forceReInit=kFALSE,
- UInt_t what = (kPulseGain|kPedestal|kDeadMap|kSampleRate|
- kZeroSuppression|kAltroMap|kStripRange));
+ void Init(Bool_t forceReInit=kFALSE, UInt_t what=kAll );
/** Initialize the manager. This tries to read the parameters from
CDB. If that fails, the class uses the hard-coded parameters.
*/
void Init(AliFMDPreprocessor* pp,
- Bool_t forceReInit=kFALSE,
- UInt_t what = (kPulseGain|kPedestal|kDeadMap|kSampleRate|
- kZeroSuppression|kAltroMap|kStripRange));
+ Bool_t forceReInit=kFALSE,
+ UInt_t what=kAll);
+ /**
+ * Initialize the manager. This will try to read some calibrations
+ * (sample rate, strip range, gains, pedestals) from local comma
+ * separated value (CSV) files in the directory pointed at by @a
+ * path. If they are not found, then they will be retrieved from
+ * OCDB as appropriately. Other calibrations are always read from
+ * OCDB.
+ *
+ * The CSV files should be named as
+ *
+ * - Pedestals: <tt>peds</tt><i>det_number</i><tt>.csv</tt>
+ * - Gains: <tt>gains</tt><i>det_number</i><tt>.csv</tt>
+ * - Sample Rate: <tt>conditions</tt><i>det_number</i><tt>.csv</tt>
+ * - Strip Range: <tt>conditions</tt><i>det_number</i><tt>.csv</tt>
+ *
+ * where <i>det_number</i> is the detector number (1, 2, or 3).
+ *
+ * @param path Where to look for the CSV files
+ * @param forceReInit Always reinitialise
+ * @param what What calibrations to load.
+ */
+ void Init(const char* path,
+ Bool_t forceReInit=kFALSE,
+ UInt_t what=kAll);
+
+ /**
+ * Automatically generate a dead map from the pedestals and gains.
+ * A channel is marked as dead of the noise is too high (currently
+ * more than 10 ADC counts), or the gain is unreasonable (currently
+ * larger than 10, or smaller than 0.1).
+ *
+ * The procedure does not overwrite channels previously marked as
+ * dead - e.g., channels marked as dead in the calibration loaded
+ * from OCDB will continue to be marked as dead. That is, this
+ * procedure will never make a channel un-dead.
+ *
+ * @param maxNoise Maximum noise value before a channel is marked
+ * as dead.
+ * @param minGain Minimum value of the calibrated gain before a
+ * channel is considered dead.
+ * @param maxGain Maximum value of the calibrated gain before a
+ * channel is considered dead.
+ */
+ void MakeDeadMap(Float_t maxNoise=10, Float_t minGain=.1, Float_t maxGain=10);
/** Print all parameters.
@param option Option string */
void Print(Option_t* option="A") const;
void SetSampleRate(AliFMDCalibSampleRate* r) { fSampleRate = r; }
/** @param p Pedestal value in ADC counts */
void SetPedestal(Float_t p=10) { fFixedPedestal = p; }
+ /** @param p Pedestal map */
+ void SetPedestal(AliFMDCalibPedestal* p) { fPedestal = p; }
/** @param w Pedestal width in ADC counts */
void SetPedestalWidth(Float_t w=1) { fFixedPedestalWidth = w; }
/** @param t Threshold used for 1 MIP acceptance. */
the older invalid format (7 32bit words with bogus entries)
@param yes if true the raw data has complete data header */
void UseCompleteHeader(Bool_t yes=kTRUE) { fHasCompleteHeader = yes; }
+ /** @param g Gain map */
+ void SetGain(AliFMDCalibGain* g) { fPulseGain = g; }
/** @} */
/** @{ */
UShort_t GetChannelsPerAltro() const { return fChannelsPerAltro; }
/** @return The average energy deposited by one MIP */
Float_t GetEdepMip() const;
+ /** @return The conversion factor from DAC to ADC */
+ Float_t GetDACPerMIP() const;
/** @return The factor used of signal acceptance */
Float_t GetPedestalFactor() const { return fPedestalFactor; }
/** @param n Number of pre-samples to keep during zero-suppression -
@param str On return, the base of strip #
@param sam On return, the sample number for this strip
@return @c true on success, false otherwise */
- Bool_t Hardware2Detector(UInt_t ddl, UInt_t board,
- UInt_t altro, UInt_t chan,
+ Bool_t Hardware2Detector(UShort_t ddl, UShort_t board,
+ UShort_t altro, UShort_t chan,
UShort_t timebin,
UShort_t& det, Char_t& ring,
UShort_t& sec, Short_t& str,
UShort_t& sam) const;
- /** Translate hardware address to detector coordinates
- @param ddl DDL number
- @param board Board address
- @param chip Chip #
- @param channel Channel #
- @param det On return, Detector # (1-3)
- @param ring On return, Ring ID ('I' or 'O')
- @param sec On return, Sector number (0-39)
- @param str On return, Strip number (0-511)
- @return @c true on success. */
- Bool_t Hardware2Detector(UInt_t ddl, UInt_t board,
- UInt_t chip, UInt_t channel,
- UShort_t& det, Char_t& ring,
- UShort_t& sec, Short_t& str) const;
/** Map a hardware address into a detector index.
@param ddl Hardware DDL number
@param hwaddr Hardware address.
@param str On return, the base of strip #
@param sam On return, the sample number for this strip
@return @c true on success, false otherwise */
- Bool_t Hardware2Detector(UInt_t ddl, UInt_t hwaddr,
+ Bool_t Hardware2Detector(UShort_t ddl, UShort_t hwaddr,
UShort_t timebin,
UShort_t& det, Char_t& ring,
UShort_t& sec, Short_t& str,
UShort_t& sam) const;
+#if 0
+ /** Translate hardware address to detector coordinates
+ @param ddl DDL number
+ @param board Board address
+ @param chip Chip #
+ @param channel Channel #
+ @param det On return, Detector # (1-3)
+ @param ring On return, Ring ID ('I' or 'O')
+ @param sec On return, Sector number (0-39)
+ @param str On return, Strip number (0-511)
+ @return @c true on success. */
+ Bool_t Hardware2Detector(UShort_t ddl, UShort_t board,
+ UShort_t chip, UShort_t channel,
+ UShort_t& det, Char_t& ring,
+ UShort_t& sec, Short_t& str) const;
/** Translate hardware address to detector coordinates
@param ddl DDL number
@param addr Hardware address
@param sec On return, Sector number (0-39)
@param str On return, Strip number (0-511)
@return @c true on success. */
- Bool_t Hardware2Detector(UInt_t ddl, UInt_t addr, UShort_t& det,
+ Bool_t Hardware2Detector(UShort_t ddl, UShort_t addr, UShort_t& det,
Char_t& ring, UShort_t& sec, Short_t& str) const;
+#endif
/** Map a detector index into a hardware address.
@param det The detector #
Bool_t Detector2Hardware(UShort_t det, Char_t ring,
UShort_t sec, UShort_t str,
UShort_t sam,
- UInt_t& ddl, UInt_t& board,
- UInt_t& altro, UInt_t& channel,
+ UShort_t& ddl, UShort_t& board,
+ UShort_t& altro, UShort_t& channel,
UShort_t& timebin) const;
- /** Translate detector coordinates to hardware address
- @param det Detector # (1-3)
- @param ring Ring ID ('I' or 'O')
- @param sec Sector number (0-39)
- @param str Strip number (0-511)
- @param ddl On return, DDL number
- @param board On return, Board address
- @param chip On return, Chip #
- @param channel On return, Channel #
- @return @c true on success. */
- Bool_t Detector2Hardware(UShort_t det, Char_t ring,
- UShort_t sec, UShort_t str,
- UInt_t& ddl, UInt_t& board,
- UInt_t& chip, UInt_t& channel) const;
/** Map a detector index into a hardware address.
@param det The detector #
@param ring The ring ID
Bool_t Detector2Hardware(UShort_t det, Char_t ring,
UShort_t sec, UShort_t str,
UShort_t sam,
- UInt_t& ddl, UInt_t& hwaddr,
+ UShort_t& ddl, UShort_t& hwaddr,
UShort_t& timebin) const;
+#if 0
+ /** Translate detector coordinates to hardware address
+ @param det Detector # (1-3)
+ @param ring Ring ID ('I' or 'O')
+ @param sec Sector number (0-39)
+ @param str Strip number (0-511)
+ @param ddl On return, DDL number
+ @param board On return, Board address
+ @param chip On return, Chip #
+ @param channel On return, Channel #
+ @return @c true on success. */
+ Bool_t Detector2Hardware(UShort_t det, Char_t ring,
+ UShort_t sec, UShort_t str,
+ UShort_t& ddl, UShort_t& board,
+ UShort_t& chip, UShort_t& channel) const;
/** Translate detector coordinates to hardware address
@param det Detector # (1-3)
@param ring Ring ID ('I' or 'O')
@param addr On return, Hardware address
@return @c true on success. */
Bool_t Detector2Hardware(UShort_t det, Char_t ring, UShort_t sec,
- UShort_t str, UInt_t& ddl, UInt_t& addr) const;
+ UShort_t str, UShort_t& ddl, UShort_t& addr) const;
+#endif
/** Get the map that translates hardware to detector coordinates
@return Get the map that translates hardware to detector
coordinates */
static const char* GetPedestalShuttleID() {return fkPedestalShuttleID;}
static const char* GetGainShuttleID() {return fkGainShuttleID;}
static const char* GetConditionsShuttleID() {return fkConditionsShuttleID;}
+
protected:
/** CTOR */
AliFMDParameters();
virtual ~AliFMDParameters() {}
/** Singleton instance */
static AliFMDParameters* fgInstance; // Static singleton instance
+ /**
+ * Check if the file <i>prefix</i><i>number</i> exists in @a path,
+ * and write the full path to @a f.
+ *
+ * @param prefix File prefix (cond, peds, gains, ...)
+ * @param path Path to files
+ * @param number Detector number (1, 2, or 3)
+ * @param f On return full path to file (if found)
+ *
+ * @return @c true if file exists and is readable, @c false otherwise
+ */
+ Bool_t CheckFile(const char* prefix, const char* path,
+ int number, TString& f) const;
/** Get an entry from either global AliCDBManager or passed
AliFMDPreprocessor.
@param path Path to CDB object.
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff