-static Int_t eventsPerRun = 1;
-static Int_t nParticles = 100;
+//____________________________________________________________________
+//
+// $Id$
+//
+// One can use the configuration macro in compiled mode by
+// root [0] gSystem->Load("libgeant321");
+// root [0] gSystem->SetIncludePath("-I$ROOTSYS/include -I$ALICE_ROOT/include\
+// -I$ALICE_ROOT -I$ALICE/geant3/TGeant3");
+// root [0] .x grun.C(1,"ConfigPPR.C++")
+//
+#if !defined(__CINT__) || defined(__MAKECINT__)
+#include <Riostream.h>
+#include <TRandom.h>
+#include <TSystem.h>
+#include <TVirtualMC.h>
+#include <TGeant3.h>
+#include "STEER/AliRunLoader.h"
+#include "STEER/AliRun.h"
+#include "STEER/AliConfig.h"
+#include "STEER/AliGenerator.h"
+#include "PYTHIA6/AliDecayerPythia.h"
+#include "EVGEN/AliGenHIJINGpara.h"
+#include "THijing/AliGenHijing.h"
+#include "EVGEN/AliGenCocktail.h"
+#include "EVGEN/AliGenSlowNucleons.h"
+#include "EVGEN/AliSlowNucleonModelExp.h"
+#include "EVGEN/AliGenParam.h"
+#include "EVGEN/AliGenMUONlib.h"
+#include "EVGEN/AliGenMUONCocktail.h"
+#include "PYTHIA6/AliGenPythia.h"
+#include "STEER/AliMagFMaps.h"
+#include "STRUCT/AliBODY.h"
+#include "STRUCT/AliMAG.h"
+#include "STRUCT/AliABSOv0.h"
+#include "STRUCT/AliDIPOv2.h"
+#include "STRUCT/AliHALL.h"
+#include "STRUCT/AliFRAMEv2.h"
+#include "STRUCT/AliSHILv2.h"
+#include "STRUCT/AliPIPEv0.h"
+#include "ITS/AliITSvPPRasymmFMD.h"
+#include "TPC/AliTPCv2.h"
+#include "TOF/AliTOFv4T0.h"
+#include "RICH/AliRICHv1.h"
+#include "ZDC/AliZDCv2.h"
+#include "TRD/AliTRDv1.h"
+#include "FMD/AliFMDv1.h"
+#include "MUON/AliMUONv1.h"
+#include "MUON/AliMUONSt1GeometryBuilderV2.h"
+#include "MUON/AliMUONSt2GeometryBuilder.h"
+#include "MUON/AliMUONSlatGeometryBuilder.h"
+#include "MUON/AliMUONTriggerGeometryBuilder.h"
+#include "PHOS/AliPHOSv1.h"
+#include "PMD/AliPMDv1.h"
+#include "START/AliSTARTv1.h"
+#include "EMCAL/AliEMCALv1.h"
+#include "CRT/AliCRTv0.h"
+#include "VZERO/AliVZEROv2.h"
+#endif
-enum PprRun_t {
+//____________________________________________________________________
+//
+// Generator types
+//
+enum EG_t {
test50,
- kParam_8000,
- kParam_4000,
- kParam_2000,
- kHijing_cent1,
- kHijing_cent2,
- kHijing_per1,
- kHijing_per2,
- kHijing_per3,
- kHijing_per4,
- kHijing_per5,
- kHijing_jj25,
- kHijing_jj50,
- kHijing_jj75,
- kHijing_jj100,
- kHijing_jj200,
- kHijing_gj25,
- kHijing_gj50,
- kHijing_gj75,
- kHijing_gj100,
- kHijing_gj200,
- kHijing_pA,
- kPythia6,
- kPythia6Jets,
- kD0PbPb5500,
- kD_TRD,
- kB_TRD,
- kJpsi_TRD,
- kU_TRD,
- kPyJJ,
- kPyGJ
+ kParam_8000, //
+ kParam_4000, //
+ kParam_2000, //
+ kHijing_cent1, //
+ kHijing_cent2, //
+ kHijing_per1, //
+ kHijing_per2, //
+ kHijing_per3, //
+ kHijing_per4, //
+ kHijing_per5, //
+ kHijing_jj25, //
+ kHijing_jj50, //
+ kHijing_jj75, //
+ kHijing_jj100, //
+ kHijing_jj200, //
+ kHijing_gj25, //
+ kHijing_gj50, //
+ kHijing_gj75, //
+ kHijing_gj100, //
+ kHijing_gj200, //
+ kHijing_pA, //
+ kPythia6, //
+ kPythia6Jets20_24, //
+ kPythia6Jets24_29, //
+ kPythia6Jets29_35, //
+ kPythia6Jets35_42, //
+ kPythia6Jets42_50, //
+ kPythia6Jets50_60, //
+ kPythia6Jets60_72, //
+ kPythia6Jets72_86, //
+ kPythia6Jets86_104, //
+ kPythia6Jets104_125, //
+ kPythia6Jets125_150, //
+ kPythia6Jets150_180, //
+ kD0PbPb5500, //
+ kCharmSemiElPbPb5500, //
+ kBeautySemiElPbPb5500, //
+ kCocktailTRD, //
+ kPyJJ, //
+ kPyGJ, //
+ kMuonCocktailCent1, //
+ kMuonCocktailPer1, //
+ kMuonCocktailPer4, //
+ kMuonCocktailCent1HighPt, //
+ kMuonCocktailPer1HighPt, //
+ kMuonCocktailPer4HighPt, //
+ kMuonCocktailCent1Single, //
+ kMuonCocktailPer1Single, //
+ kMuonCocktailPer4Single,
+ kEgMax
};
-enum PprGeo_t {
- kHoles,
- kNoHoles
+//____________________________________________________________________
+//
+// Generator types names
+//
+const char* egName[kEgMax] = {
+ "test50",
+ "kParam_8000", //
+ "kParam_4000", //
+ "kParam_2000", //
+ "kHijing_cent1", //
+ "kHijing_cent2", //
+ "kHijing_per1", //
+ "kHijing_per2", //
+ "kHijing_per3", //
+ "kHijing_per4", //
+ "kHijing_per5", //
+ "kHijing_jj25", //
+ "kHijing_jj50", //
+ "kHijing_jj75", //
+ "kHijing_jj100", //
+ "kHijing_jj200", //
+ "kHijing_gj25", //
+ "kHijing_gj50", //
+ "kHijing_gj75", //
+ "kHijing_gj100", //
+ "kHijing_gj200", //
+ "kHijing_pA", //
+ "kPythia6", //
+ "kPythia6Jets20_24", //
+ "kPythia6Jets24_29", //
+ "kPythia6Jets29_35", //
+ "kPythia6Jets35_42", //
+ "kPythia6Jets42_50", //
+ "kPythia6Jets50_60", //
+ "kPythia6Jets60_72", //
+ "kPythia6Jets72_86", //
+ "kPythia6Jets86_104", //
+ "kPythia6Jets104_125", //
+ "kPythia6Jets125_150", //
+ "kPythia6Jets150_180", //
+ "kD0PbPb5500", //
+ "kCharmSemiElPbPb5500", //
+ "kBeautySemiElPbPb5500", //
+ "kCocktailTRD", //
+ "kPyJJ", //
+ "kPyGJ", //
+ "kMuonCocktailCent1", //
+ "kMuonCocktailPer1", //
+ "kMuonCocktailPer4", //
+ "kMuonCocktailCent1HighPt", //
+ "kMuonCocktailPer1HighPt", //
+ "kMuonCocktailPer4HighPt", //
+ "kMuonCocktailCent1Single", //
+ "kMuonCocktailPer1Single", //
+ "kMuonCocktailPer4Single"
};
-enum PprRad_t {
- kGluonRadiation,
- kNoGluonRadiation
+//____________________________________________________________________
+enum Geo_t {
+ kHoles, //
+ kNoHoles //
};
-enum PprMag_t {
- k2kG,
- k4kG,
- k5kG
+//____________________________________________________________________
+enum Rad_t {
+ kGluonRadiation, //
+ kNoGluonRadiation //
};
+//____________________________________________________________________
+enum Mag_t {
+ k2kG, //
+ k4kG, //
+ k5kG //
+};
+
+//____________________________________________________________________
enum MC_t {
kFLUKA,
kGEANT3,
kGEANT4
};
-
-// This part for configuration
-//static PprRun_t srun = test50;
-static PprRun_t srun = kPythia6;
-static PprGeo_t sgeo = kHoles;
-static PprRad_t srad = kGluonRadiation;
-static PprMag_t smag = k5kG;
-// static MC_t smc = kFLUKA;
-static MC_t smc = kGEANT3;
-
-// Comment line
-static TString comment;
-
+//____________________________________________________________________
// Functions
-Float_t EtaToTheta(Float_t arg);
-
+Float_t EtaToTheta(Float_t eta);
+Eg_t LookupEG(const Char_t* name);
+AliGenerator* GeneratorFactory(EG_t eg, Rad_t rad, TString& comment);
+AliGenHijing* HijingStandard();
+void ProcessEnvironmentVars(EG_t& eg, Int_t& seed);
-void Config()
+//____________________________________________________________________
+void
+Config()
{
- cout << "==> Config.C..." << endl;
+ //____________________________________________________________________
+ // This part for configuration
+ //static EG_t eg = test50;
+ EG_t eg = kParam_2000;
+ Geo_t geo = kNoHoles;
+ Rad_t rad = kGluonRadiation;
+ Mag_t mag = k5kG;
+ Int_t seed = 12345; //Set 0 to use the current time
+ MC_t mc = kGEANT3;
+ //____________________________________________________________________
+ // Comment line
+ static TString comment;
+
+ //____________________________________________________________________
+ // Get settings from environment variables
+ ProcessEnvironmentVars(eg, seed);
+
+ //____________________________________________________________________
// Set Random Number seed
- gRandom->SetSeed(12345);
- cout<<"Seed for random number generation= "<<gRandom->GetSeed()<<endl;
+ gRandom->SetSeed(seed);
+ cout<<"Seed for random number generation= "<<gRandom->GetSeed()<<endl;
- switch (smc) {
+
+ //__________________________________________________________________
+ switch (mc) {
case kFLUKA:
//
// libraries required by fluka21
gAlice->Fatal("Config.C", "No MC type chosen");
return;
}
-
- //
- // Run loader
- //
+
+ //__________________________________________________________________
+ AliRunLoader* rl = 0;
+
cout<<"Config.C: Creating Run Loader ..."<<endl;
- AliRunLoader* rl = AliRunLoader::Open("galice.root",
- AliConfig::GetDefaultEventFolderName(),
- "recreate");
+ rl = AliRunLoader::Open("galice.root",
+ AliConfig::GetDefaultEventFolderName(),
+ "recreate");
if (!rl) {
gAlice->Fatal("Config.C","Can not instatiate the Run Loader");
return;
rl->SetNumberOfEventsPerFile(3);
gAlice->SetRunLoader(rl);
- switch (smc) {
+ //__________________________________________________________________
+ // For FLUKA
+ switch (mc) {
case kFLUKA:
{
//
}
break;
}
-
-
+
+ //__________________________________________________________________
//
// Set External decayer
- //
AliDecayer *decayer = new AliDecayerPythia();
- decayer->SetForceDecay(kAll);
+ switch (eg) {
+ case kD0PbPb5500: decayer->SetForceDecay(kHadronicD); break;
+ case kCharmSemiElPbPb5500: decayer->SetForceDecay(kSemiElectronic); break;
+ case kBeautySemiElPbPb5500: decayer->SetForceDecay(kSemiElectronic); break;
+ default: decayer->SetForceDecay(kAll); break;
+ }
decayer->Init();
gMC->SetExternalDecayer(decayer);
-
- //
- // Physics process control
- //
+ //__________________________________________________________________
+ // ************* STEERING parameters FOR ALICE SIMULATION **************
+ // --- Specify event type to be tracked through the ALICE setup
+ // --- All positions are in cm, angles in degrees, and P and E in GeV
gMC->SetProcess("DCAY",1);
gMC->SetProcess("PAIR",1);
gMC->SetProcess("COMP",1);
gMC->SetProcess("PHOT",1);
gMC->SetProcess("PFIS",0);
- gMC->SetProcess("DRAY",1);
+ gMC->SetProcess("DRAY",0);
gMC->SetProcess("ANNI",1);
gMC->SetProcess("BREM",1);
gMC->SetProcess("MUNU",1);
- gMC->SetProcess("CKOV",1);
+ gMC->SetProcess("CKOV",1);
gMC->SetProcess("HADR",1);
gMC->SetProcess("LOSS",2);
- gMC->SetProcess("MULS",1);
+ gMC->SetProcess("MULS",1);
gMC->SetProcess("RAYL",1);
Float_t cut = 1.e-3; // 1MeV cut by default
gMC->SetCut("CUTNEU", cut);
gMC->SetCut("CUTHAD", cut);
gMC->SetCut("CUTMUO", cut);
- gMC->SetCut("BCUTE", cut);
- gMC->SetCut("BCUTM", cut);
- gMC->SetCut("DCUTE", cut);
- gMC->SetCut("DCUTM", cut);
+ gMC->SetCut("BCUTE", cut);
+ gMC->SetCut("BCUTM", cut);
+ gMC->SetCut("DCUTE", cut);
+ gMC->SetCut("DCUTM", cut);
gMC->SetCut("PPCUTM", cut);
- gMC->SetCut("TOFMAX", tofmax);
+ gMC->SetCut("TOFMAX", tofmax);
- //
- //=======================================================================
- // STEERING parameters FOR ALICE SIMULATION
- //
- // Specify event type to be tracked through the ALICE setup. All
- // positions are in cm, angles in degrees, and P and E in GeV
- //
- if (gSystem->Getenv("CONFIG_NPARTICLES"))
- nParticles = atoi(gSystem->Getenv("CONFIG_NPARTICLES"));
-
- cout << "\t* Creating and configuring generator for " << nParticles
- << " particles..." << endl;
- AliGenHIJINGpara *gener = new AliGenHIJINGpara(nParticles);
- gener->SetMomentumRange(0., 999);
- gener->SetPhiRange(0, 360);
-
- // Set pseudorapidity range from -6 to 6.
- Float_t thmin = EtaToTheta( 6.); // theta min. <---> eta max
- Float_t thmax = EtaToTheta(-6.); // theta max. <---> eta min
- gener->SetThetaRange(thmin,thmax);
- gener->SetOrigin(0, 0, 0); //vertex position
- gener->SetSigma(0, 0, 0); //Sigma in (X,Y,Z) (cm) on IP position
- gener->Init();
- //
- // Activate this line if you want the vertex smearing to happen
- // track by track
- //
- gAlice->SetDebug(10);
+ //__________________________________________________________________
+ // Generator Configuration
+ gAlice->SetDebug(0);
+ AliGenerator* gener = GeneratorFactory(eg, rad, comment);
+ gener->SetOrigin(0, 0, 0); // vertex position
+ gener->SetSigma(0, 0, 5.3); // Sigma in (X,Y,Z) (cm) on IP position
+ gener->SetCutVertexZ(1.); // Truncate at 1 sigma
+ gener->SetVertexSmear(kPerEvent);
+ gener->SetTrackingFlag(1);
+ gener->Init();
+
+ //__________________________________________________________________
//
// Comments
//
- switch (smag) {
+ switch (mag) {
case k2kG: comment = comment.Append(" | L3 field 0.2 T"); break;
case k4kG: comment = comment.Append(" | L3 field 0.4 T"); break;
case k5kG: comment = comment.Append(" | L3 field 0.5 T"); break;
}
- switch (srad) {
+ switch (rad) {
case kGluonRadiation:
comment = comment.Append(" | Gluon Radiation On"); break;
default:
comment = comment.Append(" | Gluon Radiation Off"); break;
}
- switch(sgeo) {
+ switch(geo) {
case kHoles: comment = comment.Append(" | Holes for PHOS/RICH"); break;
default: comment = comment.Append(" | No holes for PHOS/RICH"); break;
}
std::cout << "\n\n Comment: " << comment << "\n" << std::endl;
- //
+ //__________________________________________________________________
// Field (L3 0.4 T)
- //
- AliMagFMaps* field = new AliMagFMaps("Maps","Maps", 2, 1., 10., smag);
+ AliMagFMaps* field = new AliMagFMaps("Maps","Maps", 2, 1., 10., mag);
field->SetL3ConstField(0); //Using const. field in the barrel
rl->CdGAFile();
- gAlice->SetField(field);
+ gAlice->SetField(field);
+ //__________________________________________________________________
//
// Used detectors
//
cout << "\t* Creating the detectors ..." << endl;
//=================== Alice BODY parameters =============================
- //=================== Alice BODY parameters =============================
AliBODY *BODY = new AliBODY("BODY", "Alice envelop");
if (useDIPO) {
//=================== DIPO parameters ============================
-
AliDIPO *DIPO = new AliDIPOv2("DIPO", "Dipole version 2");
}
if (useFRAME) {
//=================== FRAME parameters ============================
AliFRAMEv2 *FRAME = new AliFRAMEv2("FRAME", "Space Frame");
- switch (sgeo) {
+ switch (geo) {
case kHoles: FRAME->SetHoles(1); break;
default: FRAME->SetHoles(0); break;
}
// Select the gas mixture (0: 97% Xe + 3% isobutane, 1: 90% Xe + 10% CO2)
TRD->SetGasMix(1);
- if (sgeo == kHoles) {
+ if (geo == kHoles) {
// With hole in front of PHOS
TRD->SetPHOShole();
// With hole in front of RICH
}
}
+//____________________________________________________________________
Float_t EtaToTheta(Float_t arg)
{
- return (180./TMath::Pi())*2.*atan(exp(-arg));
+ return (180./TMath::Pi())*2.*TMath::ATan(TMath::Exp(-arg));
+}
+
+//____________________________________________________________________
+Int_t
+LookupEG(const Char_t* name)
+{
+ TString n(name);
+ for (Int_t i = 0; i < kEgMax; i++) {
+ if (n == egName[i]) return i;
+ }
+ return -1;
+}
+
+//____________________________________________________________________
+AliGenerator*
+GeneratorFactory(EG_t eg, Rad_t rad, TString& comment)
+{
+ Int_t isw = 3;
+ if (rad == kNoGluonRadiation) isw = 0;
+
+
+ AliGenerator * gGener = 0;
+ switch (eg) {
+ case test50:
+ {
+ comment = comment.Append(":HIJINGparam test 50 particles");
+ AliGenHIJINGpara *gener = new AliGenHIJINGpara(50);
+ gener->SetMomentumRange(0, 999999.);
+ gener->SetPhiRange(0., 360.);
+ // Set pseudorapidity range from -8 to 8.
+ Float_t thmin = EtaToTheta(8); // theta min. <---> eta max
+ Float_t thmax = EtaToTheta(-8); // theta max. <---> eta min
+ gener->SetThetaRange(thmin,thmax);
+ gGener=gener;
+ }
+ break;
+ case kParam_8000:
+ {
+ comment = comment.Append(":HIJINGparam N=8000");
+ AliGenHIJINGpara *gener = new AliGenHIJINGpara(86030);
+ gener->SetMomentumRange(0, 999999.);
+ gener->SetPhiRange(0., 360.);
+ // Set pseudorapidity range from -8 to 8.
+ Float_t thmin = EtaToTheta(8); // theta min. <---> eta max
+ Float_t thmax = EtaToTheta(-8); // theta max. <---> eta min
+ gener->SetThetaRange(thmin,thmax);
+ gGener=gener;
+ }
+ break;
+ case kParam_4000:
+ {
+ comment = comment.Append("HIJINGparam N=4000");
+ AliGenHIJINGpara *gener = new AliGenHIJINGpara(43015);
+ gener->SetMomentumRange(0, 999999.);
+ gener->SetPhiRange(0., 360.);
+ // Set pseudorapidity range from -8 to 8.
+ Float_t thmin = EtaToTheta(8); // theta min. <---> eta max
+ Float_t thmax = EtaToTheta(-8); // theta max. <---> eta min
+ gener->SetThetaRange(thmin,thmax);
+ gGener=gener;
+ }
+ break;
+ case kParam_2000:
+ {
+ comment = comment.Append("HIJINGparam N=2000");
+ AliGenHIJINGpara *gener = new AliGenHIJINGpara(21507);
+ gener->SetMomentumRange(0, 999999.);
+ gener->SetPhiRange(0., 360.);
+ // Set pseudorapidity range from -8 to 8.
+ Float_t thmin = EtaToTheta(8); // theta min. <---> eta max
+ Float_t thmax = EtaToTheta(-8); // theta max. <---> eta min
+ gener->SetThetaRange(thmin,thmax);
+ gGener=gener;
+ }
+ break;
+ //
+ // Hijing Central
+ //
+ case kHijing_cent1:
+ {
+ comment = comment.Append("HIJING cent1");
+ AliGenHijing *gener = HijingStandard();
+ // impact parameter range
+ gener->SetImpactParameterRange(0., 5.);
+ gGener=gener;
+ }
+ break;
+ case kHijing_cent2:
+ {
+ comment = comment.Append("HIJING cent2");
+ AliGenHijing *gener = HijingStandard();
+ // impact parameter range
+ gener->SetImpactParameterRange(0., 2.);
+ gGener=gener;
+ }
+ break;
+ //
+ // Hijing Peripheral
+ //
+ case kHijing_per1:
+ {
+ comment = comment.Append("HIJING per1");
+ AliGenHijing *gener = HijingStandard();
+ // impact parameter range
+ gener->SetImpactParameterRange(5., 8.6);
+ gGener=gener;
+ }
+ break;
+ case kHijing_per2:
+ {
+ comment = comment.Append("HIJING per2");
+ AliGenHijing *gener = HijingStandard();
+ // impact parameter range
+ gener->SetImpactParameterRange(8.6, 11.2);
+ gGener=gener;
+ }
+ break;
+ case kHijing_per3:
+ {
+ comment = comment.Append("HIJING per3");
+ AliGenHijing *gener = HijingStandard();
+ // impact parameter range
+ gener->SetImpactParameterRange(11.2, 13.2);
+ gGener=gener;
+ }
+ break;
+ case kHijing_per4:
+ {
+ comment = comment.Append("HIJING per4");
+ AliGenHijing *gener = HijingStandard();
+ // impact parameter range
+ gener->SetImpactParameterRange(13.2, 15.);
+ gGener=gener;
+ }
+ break;
+ case kHijing_per5:
+ {
+ comment = comment.Append("HIJING per5");
+ AliGenHijing *gener = HijingStandard();
+ // impact parameter range
+ gener->SetImpactParameterRange(15., 100.);
+ gGener=gener;
+ }
+ break;
+ //
+ // Jet-Jet
+ //
+ case kHijing_jj25:
+ {
+ comment = comment.Append("HIJING Jet 25 GeV");
+ AliGenHijing *gener = HijingStandard();
+ // impact parameter range
+ gener->SetImpactParameterRange(0., 5.);
+ // trigger
+ gener->SetTrigger(1);
+ gener->SetPtJet(25.);
+ gener->SetRadiation(isw);
+ gener->SetSimpleJets(!isw);
+ gener->SetJetEtaRange(-0.3,0.3);
+ gener->SetJetPhiRange(75., 165.);
+ gGener=gener;
+ }
+ break;
+
+ case kHijing_jj50:
+ {
+ comment = comment.Append("HIJING Jet 50 GeV");
+ AliGenHijing *gener = HijingStandard();
+ // impact parameter range
+ gener->SetImpactParameterRange(0., 5.);
+ // trigger
+ gener->SetTrigger(1);
+ gener->SetPtJet(50.);
+ gener->SetRadiation(isw);
+ gener->SetSimpleJets(!isw);
+ gener->SetJetEtaRange(-0.3,0.3);
+ gener->SetJetPhiRange(75., 165.);
+ gGener=gener;
+ }
+ break;
+
+ case kHijing_jj75:
+ {
+ comment = comment.Append("HIJING Jet 75 GeV");
+ AliGenHijing *gener = HijingStandard();
+ // impact parameter range
+ gener->SetImpactParameterRange(0., 5.);
+ // trigger
+ gener->SetTrigger(1);
+ gener->SetPtJet(75.);
+ gener->SetRadiation(isw);
+ gener->SetSimpleJets(!isw);
+ gener->SetJetEtaRange(-0.3,0.3);
+ gener->SetJetPhiRange(75., 165.);
+ gGener=gener;
+ }
+ break;
+
+ case kHijing_jj100:
+ {
+ comment = comment.Append("HIJING Jet 100 GeV");
+ AliGenHijing *gener = HijingStandard();
+ // impact parameter range
+ gener->SetImpactParameterRange(0., 5.);
+ // trigger
+ gener->SetTrigger(1);
+ gener->SetPtJet(100.);
+ gener->SetRadiation(isw);
+ gener->SetSimpleJets(!isw);
+ gener->SetJetEtaRange(-0.3,0.3);
+ gener->SetJetPhiRange(75., 165.);
+ gGener=gener;
+ }
+ break;
+
+ case kHijing_jj200:
+ {
+ comment = comment.Append("HIJING Jet 200 GeV");
+ AliGenHijing *gener = HijingStandard();
+ // impact parameter range
+ gener->SetImpactParameterRange(0., 5.);
+ // trigger
+ gener->SetTrigger(1);
+ gener->SetPtJet(200.);
+ gener->SetRadiation(isw);
+ gener->SetSimpleJets(!isw);
+ gener->SetJetEtaRange(-0.3,0.3);
+ gener->SetJetPhiRange(75., 165.);
+ gGener=gener;
+ }
+ break;
+ //
+ // Gamma-Jet
+ //
+ case kHijing_gj25:
+ {
+ comment = comment.Append("HIJING Gamma 25 GeV");
+ AliGenHijing *gener = HijingStandard();
+ // impact parameter range
+ gener->SetImpactParameterRange(0., 5.);
+ // trigger
+ gener->SetTrigger(2);
+ gener->SetPtJet(25.);
+ gener->SetRadiation(isw);
+ gener->SetSimpleJets(!isw);
+ gener->SetJetEtaRange(-0.12, 0.12);
+ gener->SetJetPhiRange(220., 320.);
+ gGener=gener;
+ }
+ break;
+
+ case kHijing_gj50:
+ {
+ comment = comment.Append("HIJING Gamma 50 GeV");
+ AliGenHijing *gener = HijingStandard();
+ // impact parameter range
+ gener->SetImpactParameterRange(0., 5.);
+ // trigger
+ gener->SetTrigger(2);
+ gener->SetPtJet(50.);
+ gener->SetRadiation(isw);
+ gener->SetSimpleJets(!isw);
+ gener->SetJetEtaRange(-0.12, 0.12);
+ gener->SetJetPhiRange(220., 320.);
+ gGener=gener;
+ }
+ break;
+
+ case kHijing_gj75:
+ {
+ comment = comment.Append("HIJING Gamma 75 GeV");
+ AliGenHijing *gener = HijingStandard();
+ // impact parameter range
+ gener->SetImpactParameterRange(0., 5.);
+ // trigger
+ gener->SetTrigger(2);
+ gener->SetPtJet(75.);
+ gener->SetRadiation(isw);
+ gener->SetSimpleJets(!isw);
+ gener->SetJetEtaRange(-0.12, 0.12);
+ gener->SetJetPhiRange(220., 320.);
+ gGener=gener;
+ }
+ break;
+
+ case kHijing_gj100:
+ {
+ comment = comment.Append("HIJING Gamma 100 GeV");
+ AliGenHijing *gener = HijingStandard();
+ // impact parameter range
+ gener->SetImpactParameterRange(0., 5.);
+ // trigger
+ gener->SetTrigger(2);
+ gener->SetPtJet(100.);
+ gener->SetRadiation(isw);
+ gener->SetSimpleJets(!isw);
+ gener->SetJetEtaRange(-0.12, 0.12);
+ gener->SetJetPhiRange(220., 320.);
+ gGener=gener;
+ }
+ break;
+
+ case kHijing_gj200:
+ {
+ comment = comment.Append("HIJING Gamma 200 GeV");
+ AliGenHijing *gener = HijingStandard();
+ // impact parameter range
+ gener->SetImpactParameterRange(0., 5.);
+ // trigger
+ gener->SetTrigger(2);
+ gener->SetPtJet(200.);
+ gener->SetRadiation(isw);
+ gener->SetSimpleJets(!isw);
+ gener->SetJetEtaRange(-0.12, 0.12);
+ gener->SetJetPhiRange(220., 320.);
+ gGener=gener;
+ }
+ break;
+ case kHijing_pA:
+ {
+ comment = comment.Append("HIJING pA");
+
+ AliGenCocktail *gener = new AliGenCocktail();
+
+ AliGenHijing *hijing = new AliGenHijing(-1);
+ // centre of mass energy
+ hijing->SetEnergyCMS(TMath::Sqrt(82./208.) * 14000.);
+ // impact parameter range
+ hijing->SetImpactParameterRange(0., 15.);
+ // reference frame
+ hijing->SetReferenceFrame("CMS");
+ hijing->SetBoostLHC(1);
+ // projectile
+ hijing->SetProjectile("P", 1, 1);
+ hijing->SetTarget ("A", 208, 82);
+ // tell hijing to keep the full parent child chain
+ hijing->KeepFullEvent();
+ // enable jet quenching
+ hijing->SetJetQuenching(0);
+ // enable shadowing
+ hijing->SetShadowing(1);
+ // Don't track spectators
+ hijing->SetSpectators(0);
+ // kinematic selection
+ hijing->SetSelectAll(0);
+ //
+ AliGenSlowNucleons* gray = new AliGenSlowNucleons(1);
+ AliSlowNucleonModel* model = new AliSlowNucleonModelExp();
+ gray->SetSlowNucleonModel(model);
+ gray->SetDebug(1);
+ gener->AddGenerator(hijing,"Hijing pPb", 1);
+ gener->AddGenerator(gray, "Gray Particles",1);
+ gGener=gener;
+ }
+ break;
+ case kPythia6:
+ {
+ comment = comment.Append(":Pythia p-p @ 14 TeV");
+ AliGenPythia *gener = new AliGenPythia(-1);
+ gener->SetMomentumRange(0,999999);
+ gener->SetThetaRange(0., 180.);
+ gener->SetYRange(-12,12);
+ gener->SetPtRange(0,1000);
+ gener->SetProcess(kPyMb);
+ gener->SetEnergyCMS(14000.);
+ gGener=gener;
+ }
+ break;
+ case kPythia6Jets20_24:
+ {
+ comment = comment.Append(":Pythia jets 20-24 GeV @ 5.5 TeV");
+ AliGenPythia * gener = new AliGenPythia(-1);
+ gener->SetEnergyCMS(5500.);// Centre of mass energy
+ gener->SetProcess(kPyJets);// Process type
+ gener->SetJetEtaRange(-0.5, 0.5);// Final state kinematic cuts
+ gener->SetJetPhiRange(0., 360.);
+ gener->SetJetEtRange(10., 1000.);
+ gener->SetGluonRadiation(1,1);
+ // gener->SetPtKick(0.);
+ // Structure function
+ gener->SetStrucFunc(kCTEQ4L);
+ gener->SetPtHard(20., 24.);// Pt transfer of the hard scattering
+ gener->SetPycellParameters(2., 274, 432, 0., 4., 5., 1.0);
+ gener->SetForceDecay(kAll);// Decay type (semielectronic, etc.)
+ gGener=gener;
+ }
+ break;
+ case kPythia6Jets24_29:
+ {
+ comment = comment.Append(":Pythia jets 24-29 GeV @ 5.5 TeV");
+ AliGenPythia * gener = new AliGenPythia(-1);
+ gener->SetEnergyCMS(5500.);// Centre of mass energy
+ gener->SetProcess(kPyJets);// Process type
+ gener->SetJetEtaRange(-0.5, 0.5);// Final state kinematic cuts
+ gener->SetJetPhiRange(0., 360.);
+ gener->SetJetEtRange(10., 1000.);
+ gener->SetGluonRadiation(1,1);
+ // gener->SetPtKick(0.);
+ // Structure function
+ gener->SetStrucFunc(kCTEQ4L);
+ gener->SetPtHard(24., 29.);// Pt transfer of the hard scattering
+ gener->SetPycellParameters(2., 274, 432, 0., 4., 5., 1.0);
+ gener->SetForceDecay(kAll);// Decay type (semielectronic, etc.)
+ gGener=gener;
+ }
+ break;
+ case kPythia6Jets29_35:
+ {
+ comment = comment.Append(":Pythia jets 29-35 GeV @ 5.5 TeV");
+ AliGenPythia * gener = new AliGenPythia(-1);
+ gener->SetEnergyCMS(5500.);// Centre of mass energy
+ gener->SetProcess(kPyJets);// Process type
+ gener->SetJetEtaRange(-0.5, 0.5);// Final state kinematic cuts
+ gener->SetJetPhiRange(0., 360.);
+ gener->SetJetEtRange(10., 1000.);
+ gener->SetGluonRadiation(1,1);
+ // gener->SetPtKick(0.);
+ // Structure function
+ gener->SetStrucFunc(kCTEQ4L);
+ gener->SetPtHard(29., 35.);// Pt transfer of the hard scattering
+ gener->SetPycellParameters(2., 274, 432, 0., 4., 5., 1.0);
+ gener->SetForceDecay(kAll);// Decay type (semielectronic, etc.)
+ gGener=gener;
+ }
+ break;
+ case kPythia6Jets35_42:
+ {
+ comment = comment.Append(":Pythia jets 35-42 GeV @ 5.5 TeV");
+ AliGenPythia * gener = new AliGenPythia(-1);
+ gener->SetEnergyCMS(5500.);// Centre of mass energy
+ gener->SetProcess(kPyJets);// Process type
+ gener->SetJetEtaRange(-0.5, 0.5);// Final state kinematic cuts
+ gener->SetJetPhiRange(0., 360.);
+ gener->SetJetEtRange(10., 1000.);
+ gener->SetGluonRadiation(1,1);
+ // gener->SetPtKick(0.);
+ // Structure function
+ gener->SetStrucFunc(kCTEQ4L);
+ gener->SetPtHard(35., 42.);// Pt transfer of the hard scattering
+ gener->SetPycellParameters(2., 274, 432, 0., 4., 5., 1.0);
+ gener->SetForceDecay(kAll);// Decay type (semielectronic, etc.)
+ gGener=gener;
+ }
+ break;
+ case kPythia6Jets42_50:
+ {
+ comment = comment.Append(":Pythia jets 42-50 GeV @ 5.5 TeV");
+ AliGenPythia * gener = new AliGenPythia(-1);
+ gener->SetEnergyCMS(5500.);// Centre of mass energy
+ gener->SetProcess(kPyJets);// Process type
+ gener->SetJetEtaRange(-0.5, 0.5);// Final state kinematic cuts
+ gener->SetJetPhiRange(0., 360.);
+ gener->SetJetEtRange(10., 1000.);
+ gener->SetGluonRadiation(1,1);
+ // gener->SetPtKick(0.);
+ // Structure function
+ gener->SetStrucFunc(kCTEQ4L);
+ gener->SetPtHard(42., 50.);// Pt transfer of the hard scattering
+ gener->SetPycellParameters(2., 274, 432, 0., 4., 5., 1.0);
+ gener->SetForceDecay(kAll);// Decay type (semielectronic, etc.)
+ gGener=gener;
+ }
+ break;
+ case kPythia6Jets50_60:
+ {
+ comment = comment.Append(":Pythia jets 50-60 GeV @ 5.5 TeV");
+ AliGenPythia * gener = new AliGenPythia(-1);
+ gener->SetEnergyCMS(5500.);// Centre of mass energy
+ gener->SetProcess(kPyJets);// Process type
+ gener->SetJetEtaRange(-0.5, 0.5);// Final state kinematic cuts
+ gener->SetJetPhiRange(0., 360.);
+ gener->SetJetEtRange(10., 1000.);
+ gener->SetGluonRadiation(1,1);
+ // gener->SetPtKick(0.);
+ // Structure function
+ gener->SetStrucFunc(kCTEQ4L);
+ gener->SetPtHard(50., 60.);// Pt transfer of the hard scattering
+ gener->SetPycellParameters(2., 274, 432, 0., 4., 5., 1.0);
+ gener->SetForceDecay(kAll);// Decay type (semielectronic, etc.)
+ gGener=gener;
+ }
+ break;
+ case kPythia6Jets60_72:
+ {
+ comment = comment.Append(":Pythia jets 60-72 GeV @ 5.5 TeV");
+ AliGenPythia * gener = new AliGenPythia(-1);
+ gener->SetEnergyCMS(5500.);// Centre of mass energy
+ gener->SetProcess(kPyJets);// Process type
+ gener->SetJetEtaRange(-0.5, 0.5);// Final state kinematic cuts
+ gener->SetJetPhiRange(0., 360.);
+ gener->SetJetEtRange(10., 1000.);
+ gener->SetGluonRadiation(1,1);
+ // gener->SetPtKick(0.);
+ // Structure function
+ gener->SetStrucFunc(kCTEQ4L);
+ gener->SetPtHard(60., 72.);// Pt transfer of the hard scattering
+ gener->SetPycellParameters(2., 274, 432, 0., 4., 5., 1.0);
+ gener->SetForceDecay(kAll);// Decay type (semielectronic, etc.)
+ gGener=gener;
+ }
+ break;
+ case kPythia6Jets72_86:
+ {
+ comment = comment.Append(":Pythia jets 72-86 GeV @ 5.5 TeV");
+ AliGenPythia * gener = new AliGenPythia(-1);
+ gener->SetEnergyCMS(5500.);// Centre of mass energy
+ gener->SetProcess(kPyJets);// Process type
+ gener->SetJetEtaRange(-0.5, 0.5);// Final state kinematic cuts
+ gener->SetJetPhiRange(0., 360.);
+ gener->SetJetEtRange(10., 1000.);
+ gener->SetGluonRadiation(1,1);
+ // gener->SetPtKick(0.);
+ // Structure function
+ gener->SetStrucFunc(kCTEQ4L);
+ gener->SetPtHard(72., 86.);// Pt transfer of the hard scattering
+ gener->SetPycellParameters(2., 274, 432, 0., 4., 5., 1.0);
+ gener->SetForceDecay(kAll);// Decay type (semielectronic, etc.)
+ gGener=gener;
+ }
+ break;
+ case kPythia6Jets86_104:
+ {
+ comment = comment.Append(":Pythia jets 86-104 GeV @ 5.5 TeV");
+ AliGenPythia * gener = new AliGenPythia(-1);
+ gener->SetEnergyCMS(5500.);// Centre of mass energy
+ gener->SetProcess(kPyJets);// Process type
+ gener->SetJetEtaRange(-0.5, 0.5);// Final state kinematic cuts
+ gener->SetJetPhiRange(0., 360.);
+ gener->SetJetEtRange(10., 1000.);
+ gener->SetGluonRadiation(1,1);
+ // gener->SetPtKick(0.);
+ // Structure function
+ gener->SetStrucFunc(kCTEQ4L);
+ gener->SetPtHard(86., 104.);// Pt transfer of the hard scattering
+ gener->SetPycellParameters(2., 274, 432, 0., 4., 5., 1.0);
+ gener->SetForceDecay(kAll);// Decay type (semielectronic, etc.)
+ gGener=gener;
+ }
+ break;
+ case kPythia6Jets104_125:
+ {
+ comment = comment.Append(":Pythia jets 105-125 GeV @ 5.5 TeV");
+ AliGenPythia * gener = new AliGenPythia(-1);
+ gener->SetEnergyCMS(5500.);// Centre of mass energy
+ gener->SetProcess(kPyJets);// Process type
+ gener->SetJetEtaRange(-0.5, 0.5);// Final state kinematic cuts
+ gener->SetJetPhiRange(0., 360.);
+ gener->SetJetEtRange(10., 1000.);
+ gener->SetGluonRadiation(1,1);
+ // gener->SetPtKick(0.);
+ // Structure function
+ gener->SetStrucFunc(kCTEQ4L);
+ gener->SetPtHard(104., 125.);// Pt transfer of the hard scattering
+ gener->SetPycellParameters(2., 274, 432, 0., 4., 5., 1.0);
+ gener->SetForceDecay(kAll);// Decay type (semielectronic, etc.)
+ gGener=gener;
+ }
+ break;
+ case kPythia6Jets125_150:
+ {
+ comment = comment.Append(":Pythia jets 125-150 GeV @ 5.5 TeV");
+ AliGenPythia * gener = new AliGenPythia(-1);
+ gener->SetEnergyCMS(5500.);// Centre of mass energy
+ gener->SetProcess(kPyJets);// Process type
+ gener->SetJetEtaRange(-0.5, 0.5);// Final state kinematic cuts
+ gener->SetJetPhiRange(0., 360.);
+ gener->SetJetEtRange(10., 1000.);
+ gener->SetGluonRadiation(1,1);
+ // gener->SetPtKick(0.);
+ // Structure function
+ gener->SetStrucFunc(kCTEQ4L);
+ gener->SetPtHard(125., 150.);// Pt transfer of the hard scattering
+ gener->SetPycellParameters(2., 274, 432, 0., 4., 5., 1.0);
+ gener->SetForceDecay(kAll);// Decay type (semielectronic, etc.)
+ gGener=gener;
+ }
+ break;
+ case kPythia6Jets150_180:
+ {
+ comment = comment.Append(":Pythia jets 150-180 GeV @ 5.5 TeV");
+ AliGenPythia * gener = new AliGenPythia(-1);
+ gener->SetEnergyCMS(5500.);// Centre of mass energy
+ gener->SetProcess(kPyJets);// Process type
+ gener->SetJetEtaRange(-0.5, 0.5);// Final state kinematic cuts
+ gener->SetJetPhiRange(0., 360.);
+ gener->SetJetEtRange(10., 1000.);
+ gener->SetGluonRadiation(1,1);
+ // gener->SetPtKick(0.);
+ // Structure function
+ gener->SetStrucFunc(kCTEQ4L);
+ gener->SetPtHard(150., 180.);// Pt transfer of the hard scattering
+ gener->SetPycellParameters(2., 274, 432, 0., 4., 5., 1.0);
+ gener->SetForceDecay(kAll);// Decay type (semielectronic, etc.)
+ gGener=gener;
+ }
+ break;
+ case kD0PbPb5500:
+ {
+ comment = comment.Append(" D0 in Pb-Pb at 5.5 TeV");
+ AliGenPythia * gener = new AliGenPythia(10);
+ gener->SetProcess(kPyD0PbPbMNR);
+ gener->SetStrucFunc(kCTEQ4L);
+ gener->SetPtHard(2.1,-1.0);
+ gener->SetEnergyCMS(5500.);
+ gener->SetNuclei(208,208);
+ gener->SetForceDecay(kHadronicD);
+ gener->SetYRange(-2,2);
+ gener->SetFeedDownHigherFamily(kFALSE);
+ gener->SetStackFillOpt(AliGenPythia::kParentSelection);
+ gener->SetCountMode(AliGenPythia::kCountParents);
+ gGener=gener;
+ }
+ break;
+ case kCharmSemiElPbPb5500:
+ {
+ comment = comment.Append(" Charm in Pb-Pb at 5.5 TeV");
+ AliGenPythia * gener = new AliGenPythia(10);
+ gener->SetProcess(kPyCharmPbPbMNR);
+ gener->SetStrucFunc(kCTEQ4L);
+ gener->SetPtHard(2.1,-1.0);
+ gener->SetEnergyCMS(5500.);
+ gener->SetNuclei(208,208);
+ gener->SetForceDecay(kSemiElectronic);
+ gener->SetYRange(-2,2);
+ gener->SetFeedDownHigherFamily(kFALSE);
+ gener->SetCountMode(AliGenPythia::kCountParents);
+ gGener=gener;
+ }
+ break;
+ case kBeautySemiElPbPb5500:
+ {
+ comment = comment.Append(" Beauty in Pb-Pb at 5.5 TeV");
+ AliGenPythia *gener = new AliGenPythia(10);
+ gener->SetProcess(kPyBeautyPbPbMNR);
+ gener->SetStrucFunc(kCTEQ4L);
+ gener->SetPtHard(2.75,-1.0);
+ gener->SetEnergyCMS(5500.);
+ gener->SetNuclei(208,208);
+ gener->SetForceDecay(kSemiElectronic);
+ gener->SetYRange(-2,2);
+ gener->SetFeedDownHigherFamily(kFALSE);
+ gener->SetCountMode(AliGenPythia::kCountParents);
+ gGener=gener;
+ }
+ break;
+ case kCocktailTRD:
+ {
+ comment = comment.Append(" Cocktail for TRD at 5.5 TeV");
+ AliGenCocktail *gener = new AliGenCocktail();
+
+ AliGenParam *jpsi = new AliGenParam(10,
+ new AliGenMUONlib(),
+ AliGenMUONlib::kJpsiFamily,
+ "Vogt PbPb");
+
+ jpsi->SetPtRange(0, 100);
+ jpsi->SetYRange(-1., +1.);
+ jpsi->SetForceDecay(kDiElectron);
+
+ AliGenParam *ups = new AliGenParam(10,
+ new AliGenMUONlib(),
+ AliGenMUONlib::kUpsilonFamily,
+ "Vogt PbPb");
+ ups->SetPtRange(0, 100);
+ ups->SetYRange(-1., +1.);
+ ups->SetForceDecay(kDiElectron);
+
+ AliGenParam *charm = new AliGenParam(10,
+ new AliGenMUONlib(),
+ AliGenMUONlib::kCharm,
+ "central");
+ charm->SetPtRange(0, 100);
+ charm->SetYRange(-1.5, +1.5);
+ charm->SetForceDecay(kSemiElectronic);
+
+
+ AliGenParam *beauty = new AliGenParam(10,
+ new AliGenMUONlib(),
+ AliGenMUONlib::kBeauty,
+ "central");
+ beauty->SetPtRange(0, 100);
+ beauty->SetYRange(-1.5, +1.5);
+ beauty->SetForceDecay(kSemiElectronic);
+
+ gener->AddGenerator(jpsi,"J/psi",1);
+ gener->AddGenerator(ups,"Upsilon",1);
+ gener->AddGenerator(charm,"Charm",1);
+ gener->AddGenerator(beauty,"Beauty",1);
+ gGener=gener;
+ }
+ break;
+ case kPyJJ:
+ {
+ comment = comment.Append(" Jet-jet at 5.5 TeV");
+ AliGenPythia *gener = new AliGenPythia(-1);
+ gener->SetEnergyCMS(5500.);
+ gener->SetProcess(kPyJets);
+ Double_t ptHardMin=10.0, ptHardMax=-1.0;
+ gener->SetPtHard(ptHardMin,ptHardMax);
+ gener->SetYHard(-0.7,0.7);
+ gener->SetJetEtaRange(-0.2,0.2);
+ gener->SetEventListRange(0,1);
+ gGener=gener;
+ }
+ break;
+ case kPyGJ:
+ {
+ comment = comment.Append(" Gamma-jet at 5.5 TeV");
+ AliGenPythia *gener = new AliGenPythia(-1);
+ gener->SetEnergyCMS(5500.);
+ gener->SetProcess(kPyDirectGamma);
+ Double_t ptHardMin=10.0, ptHardMax=-1.0;
+ gener->SetPtHard(ptHardMin,ptHardMax);
+ gener->SetYHard(-1.0,1.0);
+ gener->SetGammaEtaRange(-0.13,0.13);
+ gener->SetGammaPhiRange(210.,330.);
+ gener->SetEventListRange(0,1);
+ gGener=gener;
+ }
+ break;
+ case kMuonCocktailCent1:
+ {
+ comment = comment.Append(" Muon Cocktail Cent1");
+ AliGenMUONCocktail * gener = new AliGenMUONCocktail();
+ gener->SetPtRange(1.0,100.); // Transverse momentum range
+ gener->SetPhiRange(0.,360.); // Azimuthal angle range
+ gener->SetYRange(-4.0,-2.4);
+ gener->SetMuonPtCut(0.8);
+ gener->SetMuonThetaCut(171.,178.);
+ gener->SetMuonMultiplicity(2);
+ gener->SetNumberOfCollisions(1626.); //Centrality class Cent1 for PDC04
+ gener->SetNumberOfParticipants(359.4);//Centrality class Cent1 for PDC04
+ gGener=gener;
+ }
+ break;
+ case kMuonCocktailPer1:
+ {
+ comment = comment.Append(" Muon Cocktail Per1");
+ AliGenMUONCocktail * gener = new AliGenMUONCocktail();
+ gener->SetPtRange(1.0,100.); // Transverse momentum range
+ gener->SetPhiRange(0.,360.); // Azimuthal angle range
+ gener->SetYRange(-4.0,-2.4);
+ gener->SetMuonPtCut(0.8);
+ gener->SetMuonThetaCut(171.,178.);
+ gener->SetMuonMultiplicity(2);
+ gener->SetNumberOfCollisions(820.0);//Centrality class Per1 for PDC04
+ gener->SetNumberOfParticipants(229.3);//Centrality class Per1 for PDC04
+ gGener=gener;
+ }
+ break;
+ case kMuonCocktailPer4:
+ {
+ comment = comment.Append(" Muon Cocktail Per4");
+ AliGenMUONCocktail * gener = new AliGenMUONCocktail();
+ gener->SetPtRange(1.0,100.); // Transverse momentum range
+ gener->SetPhiRange(0.,360.); // Azimuthal angle range
+ gener->SetYRange(-4.0,-2.4);
+ gener->SetMuonPtCut(0.8);
+ gener->SetMuonThetaCut(171.,178.);
+ gener->SetMuonMultiplicity(2);
+ gener->SetNumberOfCollisions(13.6);//Centrality class Per4 for PDC04
+ gener->SetNumberOfParticipants(13.3);//Centrality class Per4 for PDC04
+ gGener=gener;
+ }
+ break;
+ case kMuonCocktailCent1HighPt:
+ {
+ comment = comment.Append(" Muon Cocktail HighPt Cent1");
+ AliGenMUONCocktail * gener = new AliGenMUONCocktail();
+ gener->SetPtRange(1.0,100.); // Transverse momentum range
+ gener->SetPhiRange(0.,360.); // Azimuthal angle range
+ gener->SetYRange(-4.0,-2.4);
+ gener->SetMuonPtCut(2.5);
+ gener->SetMuonThetaCut(171.,178.);
+ gener->SetMuonMultiplicity(2);
+ gener->SetNumberOfCollisions(1626.); //Centrality class Cent1 for PDC04
+ gener->SetNumberOfParticipants(359.4);//Centrality class Cent1 for PDC04
+ gGener=gener;
+ }
+ break;
+ case kMuonCocktailPer1HighPt :
+ {
+ comment = comment.Append(" Muon Cocktail HighPt Per1");
+ AliGenMUONCocktail * gener = new AliGenMUONCocktail();
+ gener->SetPtRange(1.0,100.); // Transverse momentum range
+ gener->SetPhiRange(0.,360.); // Azimuthal angle range
+ gener->SetYRange(-4.0,-2.4);
+ gener->SetMuonPtCut(2.5);
+ gener->SetMuonThetaCut(171.,178.);
+ gener->SetMuonMultiplicity(2);
+ gener->SetNumberOfCollisions(820.0);//Centrality class Per1 for PDC04
+ gener->SetNumberOfParticipants(229.3);//Centrality class Per1 for PDC04
+ gGener=gener;
+ }
+ break;
+ case kMuonCocktailPer4HighPt:
+ {
+ comment = comment.Append(" Muon Cocktail HighPt Per4");
+ AliGenMUONCocktail * gener = new AliGenMUONCocktail();
+ gener->SetPtRange(1.0,100.); // Transverse momentum range
+ gener->SetPhiRange(0.,360.); // Azimuthal angle range
+ gener->SetYRange(-4.0,-2.4);
+ gener->SetMuonPtCut(2.5);
+ gener->SetMuonThetaCut(171.,178.);
+ gener->SetMuonMultiplicity(2);
+ gener->SetNumberOfCollisions(13.6);//Centrality class Per4 for PDC04
+ gener->SetNumberOfParticipants(13.3);//Centrality class Per4 for PDC04
+ gGener=gener;
+ }
+ break;
+ case kMuonCocktailCent1Single:
+ {
+ comment = comment.Append(" Muon Cocktail Single Cent1");
+ AliGenMUONCocktail * gener = new AliGenMUONCocktail();
+ gener->SetPtRange(1.0,100.); // Transverse momentum range
+ gener->SetPhiRange(0.,360.); // Azimuthal angle range
+ gener->SetYRange(-4.0,-2.4);
+ gener->SetMuonPtCut(0.8);
+ gener->SetMuonThetaCut(171.,178.);
+ gener->SetMuonMultiplicity(1);
+ gener->SetNumberOfCollisions(1626.); //Centrality class Cent1 for PDC04
+ gener->SetNumberOfParticipants(359.4);//Centrality class Cent1 for PDC04
+ gGener=gener;
+ }
+ break;
+ case kMuonCocktailPer1Single :
+ {
+ comment = comment.Append(" Muon Cocktail Single Per1");
+ AliGenMUONCocktail * gener = new AliGenMUONCocktail();
+ gener->SetPtRange(1.0,100.); // Transverse momentum range
+ gener->SetPhiRange(0.,360.); // Azimuthal angle range
+ gener->SetYRange(-4.0,-2.4);
+ gener->SetMuonPtCut(0.8);
+ gener->SetMuonThetaCut(171.,178.);
+ gener->SetMuonMultiplicity(1);
+ gener->SetNumberOfCollisions(820.0);//Centrality class Per1 for PDC04
+ gener->SetNumberOfParticipants(229.3);//Centrality class Per1 for PDC04
+ gGener=gener;
+ }
+ break;
+ case kMuonCocktailPer4Single:
+ {
+ comment = comment.Append(" Muon Cocktail Single Per4");
+ AliGenMUONCocktail * gener = new AliGenMUONCocktail();
+ gener->SetPtRange(1.0,100.); // Transverse momentum range
+ gener->SetPhiRange(0.,360.); // Azimuthal angle range
+ gener->SetYRange(-4.0,-2.4);
+ gener->SetMuonPtCut(0.8);
+ gener->SetMuonThetaCut(171.,178.);
+ gener->SetMuonMultiplicity(1);
+ gener->SetNumberOfCollisions(13.6);//Centrality class Per4 for PDC04
+ gener->SetNumberOfParticipants(13.3);//Centrality class Per4 for PDC04
+ gGener=gener;
+ }
+ break;
+ default: break;
+ }
+ return gGener;
+}
+
+//____________________________________________________________________
+AliGenHijing*
+HijingStandard()
+{
+ AliGenHijing *gener = new AliGenHijing(-1);
+ // centre of mass energy
+ gener->SetEnergyCMS(5500.);
+ // reference frame
+ gener->SetReferenceFrame("CMS");
+ // projectile
+ gener->SetProjectile("A", 208, 82);
+ gener->SetTarget ("A", 208, 82);
+ // tell hijing to keep the full parent child chain
+ gener->KeepFullEvent();
+ // enable jet quenching
+ gener->SetJetQuenching(1);
+ // enable shadowing
+ gener->SetShadowing(1);
+ // neutral pion and heavy particle decays switched off
+ gener->SetDecaysOff(1);
+ // Don't track spectators
+ gener->SetSpectators(0);
+ // kinematic selection
+ gener->SetSelectAll(0);
+ return gener;
+}
+
+
+//____________________________________________________________________
+void
+ProcessEnvironmentVars(EG_t& eg, Int_t& seed)
+{
+ // Run type
+ if (gSystem->Getenv("CONFIG_RUN_TYPE")) {
+ Int_t eg1 = LookupEG(gSystem->Getenv("CONFIG_RUN_TYPE"));
+ if (eg1 >= 0) eg = EG_t(eg1);
+ }
+ // Random Number seed
+ if (gSystem->Getenv("CONFIG_SEED")) {
+ seed = atoi(gSystem->Getenv("CONFIG_SEED"));
+ }
}
+//____________________________________________________________________
+//
+// EOF
+//
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff