// -I$ALICE_ROOT -I$ALICE/geant3/TGeant3");
// root [0] .x grun.C(1,"ConfigPPR.C++")
//
-#if !defined(__CINT__) || defined(__MAKECINT__)
-#include <Riostream.h>
-#include <TRandom.h>
-#include <TSystem.h>
-#include <TVirtualMC.h>
-#include <TGeant3.h>
-#include "STEER/AliRunLoader.h"
-#include "STEER/AliRun.h"
-#include "STEER/AliConfig.h"
-#include "STEER/AliGenerator.h"
-#include "PYTHIA6/AliDecayerPythia.h"
-#include "EVGEN/AliGenHIJINGpara.h"
-#include "THijing/AliGenHijing.h"
-#include "EVGEN/AliGenCocktail.h"
-#include "EVGEN/AliGenSlowNucleons.h"
-#include "EVGEN/AliSlowNucleonModelExp.h"
-#include "EVGEN/AliGenParam.h"
-#include "EVGEN/AliGenMUONlib.h"
-#include "EVGEN/AliGenMUONCocktail.h"
-#include "PYTHIA6/AliGenPythia.h"
-#include "STEER/AliMagFMaps.h"
-#include "STRUCT/AliBODY.h"
-#include "STRUCT/AliMAG.h"
-#include "STRUCT/AliABSOv0.h"
-#include "STRUCT/AliDIPOv2.h"
-#include "STRUCT/AliHALL.h"
-#include "STRUCT/AliFRAMEv2.h"
-#include "STRUCT/AliSHILv2.h"
-#include "STRUCT/AliPIPEv0.h"
-#include "ITS/AliITSvPPRasymmFMD.h"
-#include "TPC/AliTPCv2.h"
-#include "TOF/AliTOFv4T0.h"
-#include "RICH/AliRICHv1.h"
-#include "ZDC/AliZDCv2.h"
-#include "TRD/AliTRDv1.h"
-#include "FMD/AliFMDv1.h"
-#include "MUON/AliMUONv1.h"
-#include "MUON/AliMUONSt1GeometryBuilderV2.h"
-#include "MUON/AliMUONSt2GeometryBuilder.h"
-#include "MUON/AliMUONSlatGeometryBuilder.h"
-#include "MUON/AliMUONTriggerGeometryBuilder.h"
-#include "PHOS/AliPHOSv1.h"
-#include "PMD/AliPMDv1.h"
-#include "START/AliSTARTv1.h"
-#include "EMCAL/AliEMCALv1.h"
-#include "CRT/AliCRTv0.h"
-#include "VZERO/AliVZEROv2.h"
-#endif
+/** @file Config.C
+ @author Christian Holm Christensen <cholm@nbi.dk>
+ @date Mon Mar 27 12:50:29 2006
+ @brief Simulation configuration script
+*/
//____________________________________________________________________
//
// Generator types
//
-enum PprRun_t {
+enum EG_t {
test50,
kParam_8000, //
kParam_4000, //
kParam_2000, //
+ kParam_fmd, //
kHijing_cent1, //
kHijing_cent2, //
kHijing_per1, //
kMuonCocktailCent1Single, //
kMuonCocktailPer1Single, //
kMuonCocktailPer4Single,
- kRunMax
+ kFMD1Flat,
+ kFMD2Flat,
+ kFMD3Flat,
+ kFMDFlat,
+ kEgMax
};
//____________________________________________________________________
//
// Generator types names
//
-const char* pprRunName[kRunMax] = {
+const char* egName[kEgMax] = {
"test50",
"kParam_8000", //
"kParam_4000", //
"kParam_2000", //
+ "kParam_fmd", //
"kHijing_cent1", //
"kHijing_cent2", //
"kHijing_per1", //
"kMuonCocktailPer4HighPt", //
"kMuonCocktailCent1Single", //
"kMuonCocktailPer1Single", //
- "kMuonCocktailPer4Single"
+ "kMuonCocktailPer4Single",
+ "kFMD1Flat",
+ "kFMD2Flat",
+ "kFMD3Flat",
+ "kFMDFlat"
};
//____________________________________________________________________
-enum PprGeo_t {
+enum Geo_t {
kHoles, //
kNoHoles //
};
//____________________________________________________________________
-enum PprRad_t {
+enum Rad_t {
kGluonRadiation, //
kNoGluonRadiation //
};
-//____________________________________________________________________
-enum PprMag_t {
- k2kG, //
- k4kG, //
- k5kG //
-};
-
//____________________________________________________________________
enum MC_t {
kFLUKA,
kGEANT3,
- kGEANT4
+ kGEANT4,
+ kGEANT3TGEO,
};
-//____________________________________________________________________
-// This part for configuration
-//static PprRun_t srun = test50;
-static PprRun_t srun = kParam_8000;
-static PprGeo_t sgeo = kNoHoles;
-static PprRad_t srad = kGluonRadiation;
-static PprMag_t smag = k5kG;
-static Int_t sseed = 12345; //Set 0 to use the current time
-static MC_t smc = kGEANT3;
-
-
-//____________________________________________________________________
-// Comment line
-static TString comment;
-
//____________________________________________________________________
// Functions
-Float_t EtaToTheta(Float_t arg);
-AliGenerator* GeneratorFactory(PprRun_t srun);
+Float_t EtaToTheta(Float_t eta);
+EG_t LookupEG(const Char_t* name);
+AliGenerator* GeneratorFactory(EG_t eg, Rad_t rad);
AliGenHijing* HijingStandard();
-void ProcessEnvironmentVars();
+void ProcessEnvironmentVars(EG_t& eg, Int_t& seed);
//____________________________________________________________________
void
Config()
{
- // ThetaRange is (0., 180.). It was (0.28,179.72) 7/12/00 09:00
- // Theta range given through pseudorapidity limits 22/6/2001
-
+ //____________________________________________________________________
+ // This part for configuration
+ EG_t eg = kPythia6;
+ Geo_t geo = kNoHoles;
+ Rad_t rad = kGluonRadiation;
+ AliMagF::BMap_t mag = AliMagF::k5kG;
+ Int_t seed = 12345; //Set 0 to use the current time
+ MC_t mc = kGEANT3TGEO;
+
+ //____________________________________________________________________
// Get settings from environment variables
- ProcessEnvironmentVars();
+ ProcessEnvironmentVars(eg, seed);
+ //____________________________________________________________________
// Set Random Number seed
- gRandom->SetSeed(sseed);
+ gRandom->SetSeed(seed);
cout<<"Seed for random number generation= "<<gRandom->GetSeed()<<endl;
//__________________________________________________________________
- switch (smc) {
+ switch (mc) {
case kFLUKA:
//
// libraries required by fluka21
gSystem->Load("libGeom");
cout << "\t* Loading TFluka..." << endl;
gSystem->Load("libTFluka");
-
+ gSystem->MakeDirectory("peg");
//
// FLUKA MC
//
new TFluka("C++ Interface to Fluka", 0/*verbosity*/);
break;
case kGEANT3:
- //
- // Libraries needed by GEANT 3.21
- //
- gSystem->Load("libgeant321");
+ {
+ //
+ // Libraries needed by GEANT 3.21
+ //
+ gSystem->Load("$ALICE_ROOT/lib/tgt_$ALICE_TARGET/libpythia6.so");
+ gSystem->Load("libgeant321");
+
+ //
+ // GEANT 3.21 MC
+ //
+ TGeant3* gmc = new TGeant3("C++ Interface to Geant3");
+ gmc->SetSWIT(4, 1000);
+ }
+ break;
+ case kGEANT3TGEO:
+ {
+ //
+ // Libraries needed by GEANT 3.21
+ //
+ gSystem->Load("$ALICE_ROOT/lib/tgt_$ALICE_TARGET/liblhapdf.so");
+ gSystem->Load("$ALICE_ROOT/lib/tgt_$ALICE_TARGET/libpythia6.so");
+ gSystem->Load("libEGPythia6.so"); //<- For non-debian (sigh!)
+ // gSystem->Load("EGPythia6.so");
+ gSystem->Load("libgeant321");
- //
- // GEANT 3.21 MC
- //
- new TGeant3("C++ Interface to Geant3");
+ //
+ // GEANT 3.21 MC
+ //
+ TGeant3TGeo* gmc = new TGeant3TGeo("C++ Interface to Geant3");
+ gmc->SetSWIT(4, 1000);
+ Printf("Making a TGeant3TGeo objet");
+ }
break;
default:
gAlice->Fatal("Config.C", "No MC type chosen");
//__________________________________________________________________
// For FLUKA
- switch (smc) {
+ switch (mc) {
case kFLUKA:
{
//
((TFluka*)gMC)->SetGeneratePemf(kFALSE);
else
((TFluka*)gMC)->SetGeneratePemf(kTRUE);
+ TString flupro(gSystem->Getenv("FLUPRO"));
+ if (flupro.IsNull())
+ Fatal("Config.C", "Environment variable FLUPRO not set");
+#if 0
+ char* files[] = { "brems_fin.bin", "cohff.bin", "elasct.bin",
+ "gxsect.bin", "nuclear.bin", "sigmapi.bin",
+ 0 };
+ char* file = files[0];
+ while (file) {
+ TString which(gSystem->Which(".", file));
+ if (which.IsNull()) {
+ if (gSystem->Symlink(Form("%s/%s", flupro.Data(), file), file)!=0)
+ Fatal("Config.C", "Couldn't link $(FLUPRO)/%s -> .", file);
+ }
+ file++;
+ }
+#endif
+ TString neuxsc(gSystem->Which(".", "neuxsc.bin"));
+ if (neuxsc.IsNull())
+ gSystem->Symlink(Form("%s/neuxsc_72.bin", flupro.Data()),
+ "neuxsc.bin");
+ gSystem->CopyFile("$(FLUPRO)/random.dat", "old.seed", kTRUE);
}
break;
}
+ //__________________________________________________________________
//
// Set External decayer
+#if 0
AliDecayer *decayer = new AliDecayerPythia();
-
-
- switch (srun) {
- case kD0PbPb5500:
- decayer->SetForceDecay(kHadronicD);
- break;
- case kCharmSemiElPbPb5500:
- decayer->SetForceDecay(kSemiElectronic);
- break;
- case kBeautySemiElPbPb5500:
- decayer->SetForceDecay(kSemiElectronic);
- break;
- default:
- decayer->SetForceDecay(kAll);
- break;
+ switch (eg) {
+ case kD0PbPb5500: decayer->SetForceDecay(kHadronicD); break;
+ case kCharmSemiElPbPb5500: decayer->SetForceDecay(kSemiElectronic); break;
+ case kBeautySemiElPbPb5500: decayer->SetForceDecay(kSemiElectronic); break;
+ default: decayer->SetForceDecay(kAll); break;
}
decayer->Init();
gMC->SetExternalDecayer(decayer);
+#endif
- //
- //
- //=======================================================================
- //
- //=======================================================================
- // ************* STEERING parameters FOR ALICE SIMULATION **************
- // --- Specify event type to be tracked through the ALICE setup
- // --- All positions are in cm, angles in degrees, and P and E in GeV
-
+ //__________________________________________________________________
+ // *********** STEERING parameters FOR ALICE SIMULATION ************
+ // - Specify event type to be tracked through the ALICE setup
+ // - All positions are in cm, angles in degrees, and P and E in GeV
gMC->SetProcess("DCAY",1);
gMC->SetProcess("PAIR",1);
gMC->SetProcess("COMP",1);
gMC->SetProcess("MUNU",1);
gMC->SetProcess("CKOV",1);
gMC->SetProcess("HADR",1);
- gMC->SetProcess("LOSS",2);
+ gMC->SetProcess("LOSS",1); // 0:none 1,3:dray 2:nodray 4:nofluct (def:2)
gMC->SetProcess("MULS",1);
gMC->SetProcess("RAYL",1);
gMC->SetCut("PPCUTM", cut);
gMC->SetCut("TOFMAX", tofmax);
-
+
+ //__________________________________________________________________
// Generator Configuration
- gAlice->SetDebug(0);
- AliGenerator* gener = GeneratorFactory(srun);
+ AliGenerator* gener = GeneratorFactory(eg, rad);
gener->SetOrigin(0, 0, 0); // vertex position
gener->SetSigma(0, 0, 5.3); // Sigma in (X,Y,Z) (cm) on IP position
gener->SetCutVertexZ(1.); // Truncate at 1 sigma
gener->SetTrackingFlag(1);
gener->Init();
- //
- // Comments
- //
- switch (smag) {
- case k2kG: comment = comment.Append(" | L3 field 0.2 T"); break;
- case k4kG: comment = comment.Append(" | L3 field 0.4 T"); break;
- case k5kG: comment = comment.Append(" | L3 field 0.5 T"); break;
- }
-
- switch (srad) {
- case kGluonRadiation:
- comment = comment.Append(" | Gluon Radiation On"); break;
- default:
- comment = comment.Append(" | Gluon Radiation Off"); break;
- }
-
- switch(sgeo) {
- case kHoles: comment = comment.Append(" | Holes for PHOS/RICH"); break;
- default: comment = comment.Append(" | No holes for PHOS/RICH"); break;
- }
-
- std::cout << "\n\n Comment: " << comment << "\n" << std::endl;
-
//__________________________________________________________________
// Field (L3 0.4 T)
- AliMagFMaps* field = new AliMagFMaps("Maps","Maps", 2, 1., 10., smag);
- field->SetL3ConstField(0); //Using const. field in the barrel
+ AliMagF* field = new AliMagF("Maps","Maps",-1., -1., mag);
+ TGeoGlobalMagField::Instance()->SetField(field);
+
rl->CdGAFile();
- gAlice->SetField(field);
+ TFile* magF = TFile::Open("mag.root", "RECREATE");
+ field->Write("mag");
+ magF->Close();
+
+ //__________________________________________________________________
//
// Used detectors
//
Bool_t useABSO = kFALSE;
- Bool_t useCRT = kFALSE;
+ Bool_t useACORDE= kFALSE;
Bool_t useDIPO = kFALSE;
Bool_t useFMD = kTRUE;
Bool_t useFRAME = kFALSE;
Bool_t useHALL = kFALSE;
- Bool_t useITS = kFALSE;
+ Bool_t useITS = kTRUE;
Bool_t useMAG = kFALSE;
Bool_t useMUON = kFALSE;
Bool_t usePHOS = kFALSE;
- Bool_t usePIPE = kFALSE;
+ Bool_t usePIPE = kTRUE;
Bool_t usePMD = kFALSE;
- Bool_t useRICH = kFALSE;
+ Bool_t useHMPID = kFALSE;
Bool_t useSHIL = kFALSE;
- Bool_t useSTART = kFALSE;
+ Bool_t useT0 = kTRUE;
Bool_t useTOF = kFALSE;
Bool_t useTPC = kFALSE;
Bool_t useTRD = kFALSE;
Bool_t useZDC = kFALSE;
Bool_t useEMCAL = kFALSE;
- Bool_t useVZERO = kFALSE;
+ Bool_t useVZERO = kTRUE;
cout << "\t* Creating the detectors ..." << endl;
- //=================== Alice BODY parameters =============================
- //=================== Alice BODY parameters =============================
+ // ================= Alice BODY parameters =========================
AliBODY *BODY = new AliBODY("BODY", "Alice envelop");
- if (useMAG) {
- //=================== MAG parameters ============================
- // Start with Magnet since detector layouts may be depending on
- // the selected Magnet dimensions
- AliMAG *MAG = new AliMAG("MAG", "Magnet");
- }
-
- if (useABSO) {
- //=================== ABSO parameters ============================
- AliABSO *ABSO = new AliABSOv0("ABSO", "Muon Absorber");
- }
-
- if (useDIPO) {
- //=================== DIPO parameters ============================
-
- AliDIPO *DIPO = new AliDIPOv2("DIPO", "Dipole version 2");
- }
-
- if (useHALL) {
- //=================== HALL parameters ============================
- AliHALL *HALL = new AliHALL("HALL", "Alice Hall");
- }
-
-
+ if (useMAG) AliMAG *MAG = new AliMAG("MAG", "Magnet");
+ if (useABSO) AliABSO *ABSO = new AliABSOv3("ABSO", "Muon Absorber");
+ if (useDIPO) AliDIPO *DIPO = new AliDIPOv3("DIPO", "Dipole version 3");
+ if (useHALL) AliHALL *HALL = new AliHALLv3("HALL", "Alice Hall");
if (useFRAME) {
- //=================== FRAME parameters ============================
AliFRAMEv2 *FRAME = new AliFRAMEv2("FRAME", "Space Frame");
- switch (sgeo) {
+ switch (geo) {
case kHoles: FRAME->SetHoles(1); break;
default: FRAME->SetHoles(0); break;
}
}
-
- if (useSHIL) {
- //=================== SHIL parameters ============================
- AliSHIL *SHIL = new AliSHILv2("SHIL", "Shielding Version 2");
- }
-
-
- if (usePIPE) {
- //=================== PIPE parameters ============================
- AliPIPE *PIPE = new AliPIPEv0("PIPE", "Beam Pipe");
- }
-
- if (useITS) {
- //=================== ITS parameters ============================
- //
- // As the innermost detector in ALICE, the Inner Tracking System
- // "impacts" on almost all other detectors. This involves the fact
- // that the ITS geometry still has several options to be followed
- // in parallel in order to determine the best set-up which
- // minimizes the induced background. All the geometries available
- // to date are described in the following. Read carefully the
- // comments and use the default version (the only one uncommented)
- // unless you are making comparisons and you know what you are
- // doing. In this case just uncomment the ITS geometry you want to
- // use and run Aliroot.
- //
- // Detailed geometries:
- //
- //
- // AliITS *ITS =
- // new AliITSv5symm("ITS", "Updated ITS TDR detailed version "
- // "with symmetric services");
- // AliITS *ITS =
- // new AliITSv5asymm("ITS","Updates ITS TDR detailed version "
- // "with asymmetric services");
- //
- AliITSvPPRasymmFMD *ITS =
- new AliITSvPPRasymmFMD("ITS","New ITS PPR detailed version "
- "with asymmetric services");
- // don't touch this parameter if you're not an ITS developer
- ITS->SetMinorVersion(2);
- // don't touch this parameter if you're not an ITS developer
- ITS->SetReadDet(kTRUE);
- // don't touch this parameter if you're not an ITS developer
- // ITS->SetWriteDet("$ALICE_ROOT/ITS/ITSgeometry_vPPRasymm2.det");
- // detector thickness on layer 1 must be in the range [100,300]
- ITS->SetThicknessDet1(200.);
- // detector thickness on layer 2 must be in the range [100,300]
- ITS->SetThicknessDet2(200.);
- // chip thickness on layer 1 must be in the range [150,300]
- ITS->SetThicknessChip1(200.);
- // chip thickness on layer 2 must be in the range [150,300]
- ITS->SetThicknessChip2(200.);
- // 1 --> rails in ; 0 --> rails out
- ITS->SetRails(0);
- // 1 --> water ; 0 --> freon
- ITS->SetCoolingFluid(1);
-
- // Coarse geometries (warning: no hits are produced with these
- // coarse geometries and they unuseful for reconstruction !):
- //
- //
- // AliITSvPPRcoarseasymm *ITS =
- // new AliITSvPPRcoarseasymm("ITS","New ITS PPR coarse version "
- // "with asymmetric services");
- // 1 --> rails in ; 0 --> rails out
- // ITS->SetRails(0);
- // 0 --> Copper ; 1 --> Aluminum ; 2 --> Carbon
- // ITS->SetSupportMaterial(0);
- //
- // AliITS *ITS =
- // new AliITSvPPRcoarsesymm("ITS","New ITS PPR coarse version "
- // "with symmetric services");
- // 1 --> rails in ; 0 --> rails out
- // ITS->SetRails(0);
- // 0 --> Copper ; 1 --> Aluminum ; 2 --> Carbon
- // ITS->SetSupportMaterial(0);
- //
- // Geant3 <-> EUCLID conversion
- // ============================
- //
- // SetEUCLID is a flag to output (=1) or not to output (=0) both
- // geometry and media to two ASCII files (called by default
- // ITSgeometry.euc and ITSgeometry.tme) in a format understandable
- // to the CAD system EUCLID. The default (=0) means that you dont
- // want to use this facility.
- //
- ITS->SetEUCLID(0);
- }
-
- if (useTPC) {
- //============================ TPC parameters ====================
- //
- // This allows the user to specify sectors for the SLOW (TPC
- // geometry 2) Simulator. SecAL (SecAU) <0 means that ALL lower
- // (upper) sectors are specified, any value other than that
- // requires at least one sector (lower or upper)to be specified!
- //
- // Reminder:
- // sectors 1-24 are lower sectors (1-12 -> z>0, 13-24 -> z<0)
- // sectors 25-72 are the upper ones (25-48 -> z>0, 49-72 -> z<0)
- //
- // SecLows - number of lower sectors specified (up to 6)
- // SecUps - number of upper sectors specified (up to 12)
- // Sens - sensitive strips for the Slow Simulator !!!
- //
- // This does NOT work if all S or L-sectors are specified, i.e.
- // if SecAL or SecAU < 0
- //
- //
- //----------------------------------------------------------------
- // gROOT->LoadMacro("SetTPCParam.C");
- // AliTPCParam *param = SetTPCParam();
- AliTPC *TPC = new AliTPCv2("TPC", "Default");
-
- // All sectors included
- TPC->SetSecAL(-1);
- TPC->SetSecAU(-1);
- }
-
- if (useTOF) {
- //=================== TOF parameters ============================
- AliTOF *TOF = new AliTOFv4T0("TOF", "normal TOF");
- }
-
- if (useRICH) {
- //=================== RICH parameters ===========================
- AliRICH *RICH = new AliRICHv1("RICH", "normal RICH");
-
- }
-
- if (useZDC) {
- //=================== ZDC parameters ============================
- AliZDC *ZDC = new AliZDCv2("ZDC", "normal ZDC");
- }
-
- if (useTRD) {
- //=================== TRD parameters ============================
- AliTRD *TRD = new AliTRDv1("TRD", "TRD slow simulator");
-
- // Select the gas mixture (0: 97% Xe + 3% isobutane, 1: 90% Xe + 10% CO2)
- TRD->SetGasMix(1);
- if (sgeo == kHoles) {
- // With hole in front of PHOS
- TRD->SetPHOShole();
- // With hole in front of RICH
- TRD->SetRICHhole();
- }
- // Switch on TR
- AliTRDsim *TRDsim = TRD->CreateTR();
- }
-
- if (useFMD) {
- //=================== FMD parameters ============================
- AliFMD *FMD = new AliFMDv1("FMD", "normal FMD");
- }
-
- if (useMUON) {
- //=================== MUON parameters ===========================
- AliMUON *MUON = new AliMUONv1("MUON", "default");
- MUON->AddGeometryBuilder(new AliMUONSt1GeometryBuilder(MUON));
- MUON->AddGeometryBuilder(new AliMUONSt2GeometryBuilder(MUON));
- MUON->AddGeometryBuilder(new AliMUONSlatGeometryBuilder(MUON));
- MUON->AddGeometryBuilder(new AliMUONTriggerGeometryBuilder(MUON));
- }
-
- if (usePHOS) {
- //=================== PHOS parameters ===========================
- AliPHOS *PHOS = new AliPHOSv1("PHOS", "IHEP");
- }
-
- if (usePMD) {
- //=================== PMD parameters ============================
- AliPMD *PMD = new AliPMDv1("PMD", "normal PMD");
- }
-
- if (useSTART) {
- //=================== START parameters ============================
- AliSTART *START = new AliSTARTv1("START", "START Detector");
- }
-
- if (useEMCAL) {
- //=================== EMCAL parameters ============================
- AliEMCAL *EMCAL = new AliEMCALv1("EMCAL", "EMCAL_55_25");
- }
-
- if (useCRT) {
- //=================== CRT parameters ============================
- AliCRT *CRT = new AliCRTv0("CRT", "normal ACORDE");
- }
-
- if (useVZERO) {
- //=================== CRT parameters ============================
- AliVZERO *VZERO = new AliVZEROv3("VZERO", "normal VZERO");
- }
+ if (useSHIL) AliSHIL *SHIL = new AliSHILv3("SHIL", "Shielding v3");
+ if (usePIPE) AliPIPE *PIPE = new AliPIPEv3("PIPE", "Beam Pipe");
+ if (useITS) AliITS *ITS = new AliITSv11Hybrid("ITS","ITS v11Hybrid");
+ if (useTPC) AliTPC *TPC = new AliTPCv2("TPC", "Default");
+ if (useTOF) AliTOF *TOF = new AliTOFv6T0("TOF", "normal TOF");
+ if (useHMPID) AliHMPID *HMPID = new AliHMPIDv1("HMPID", "normal HMPID");
+ if (useZDC) AliZDC *ZDC = new AliZDCv3("ZDC", "normal ZDC");
+ if (useTRD) AliTRD *TRD = new AliTRDv1("TRD", "TRD slow simulator");
+ if (useFMD) AliFMD *FMD = new AliFMDv1("FMD", "normal FMD");
+ if (useMUON) AliMUON *MUON = new AliMUONv1("MUON", "default");
+ if (usePHOS) AliPHOS *PHOS = new AliPHOSv1("PHOS", "IHEP");
+ if (usePMD) AliPMD *PMD = new AliPMDv1("PMD", "normal PMD");
+ if (useT0) AliT0 *T0 = new AliT0v1("T0", "T0 Detector");
+ if (useEMCAL) AliEMCAL *EMCAL = new AliEMCALv2("EMCAL", "EMCAL_COMPLETE");
+ if (useACORDE) AliACORDE *ACORDE = new AliACORDEv1("ACORDE", "normal ACORDE");
+ if (useVZERO) AliVZERO *VZERO = new AliVZEROv7("VZERO", "normal VZERO");
}
//____________________________________________________________________
Float_t EtaToTheta(Float_t arg)
{
- return (180./TMath::Pi())*2.*atan(exp(-arg));
+ return (180./TMath::Pi())*2.*TMath::ATan(TMath::Exp(-arg));
}
-
//____________________________________________________________________
+Int_t
+LookupEG(const Char_t* name)
+{
+ TString n(name);
+ for (Int_t i = 0; i < kEgMax; i++) {
+ if (n == egName[i]) return i;
+ }
+ return -1;
+}
+
+//____________________________________________________________________
AliGenerator*
-GeneratorFactory(PprRun_t srun)
+GeneratorFactory(EG_t eg, Rad_t rad)
{
Int_t isw = 3;
- if (srad == kNoGluonRadiation) isw = 0;
+ if (rad == kNoGluonRadiation) isw = 0;
+ // Possibly load libAliPythia6
+ switch (eg) {
+ case kPythia6:
+ case kPythia6Jets20_24:
+ case kPythia6Jets24_29:
+ case kPythia6Jets29_35:
+ case kPythia6Jets35_42:
+ case kPythia6Jets42_50:
+ case kPythia6Jets50_60:
+ case kPythia6Jets60_72:
+ case kPythia6Jets72_86:
+ case kPythia6Jets86_104:
+ case kPythia6Jets104_125:
+ case kPythia6Jets125_150:
+ case kPythia6Jets150_180:
+ gSystem->Load("liblhapdf.so");
+ // gSystem->Load("/usr/lib/libpythia.so");
+ // gSystem->ListLibraries();
+ gSystem->Load("EGPythia6.so");
+ gSystem->Load("libAliPythia6");
+ break;
+ }
AliGenerator * gGener = 0;
- switch (srun) {
+ switch (eg) {
case test50:
{
- comment = comment.Append(":HIJINGparam test 50 particles");
AliGenHIJINGpara *gener = new AliGenHIJINGpara(50);
gener->SetMomentumRange(0, 999999.);
gener->SetPhiRange(0., 360.);
break;
case kParam_8000:
{
- comment = comment.Append(":HIJINGparam N=8000");
AliGenHIJINGpara *gener = new AliGenHIJINGpara(86030);
gener->SetMomentumRange(0, 999999.);
gener->SetPhiRange(0., 360.);
break;
case kParam_4000:
{
- comment = comment.Append("HIJINGparam N=4000");
AliGenHIJINGpara *gener = new AliGenHIJINGpara(43015);
gener->SetMomentumRange(0, 999999.);
gener->SetPhiRange(0., 360.);
break;
case kParam_2000:
{
- comment = comment.Append("HIJINGparam N=2000");
AliGenHIJINGpara *gener = new AliGenHIJINGpara(21507);
gener->SetMomentumRange(0, 999999.);
gener->SetPhiRange(0., 360.);
gGener=gener;
}
break;
+ case kParam_fmd:
+ {
+ AliGenHIJINGpara *gener = new AliGenHIJINGpara(500);
+ gener->SetMomentumRange(0, 999999.);
+ gener->SetPhiRange(0., 360.);
+ // Set pseudorapidity range from -8 to 8.
+ Float_t thmin = EtaToTheta(6); // theta min. <---> eta max
+ Float_t thmax = EtaToTheta(2); // theta max. <---> eta min
+ gener->SetThetaRange(thmin,thmax);
+ gGener=gener;
+ }
+ break;
//
// Hijing Central
//
case kHijing_cent1:
{
- comment = comment.Append("HIJING cent1");
AliGenHijing *gener = HijingStandard();
// impact parameter range
gener->SetImpactParameterRange(0., 5.);
break;
case kHijing_cent2:
{
- comment = comment.Append("HIJING cent2");
AliGenHijing *gener = HijingStandard();
// impact parameter range
gener->SetImpactParameterRange(0., 2.);
//
case kHijing_per1:
{
- comment = comment.Append("HIJING per1");
AliGenHijing *gener = HijingStandard();
// impact parameter range
gener->SetImpactParameterRange(5., 8.6);
break;
case kHijing_per2:
{
- comment = comment.Append("HIJING per2");
AliGenHijing *gener = HijingStandard();
// impact parameter range
gener->SetImpactParameterRange(8.6, 11.2);
break;
case kHijing_per3:
{
- comment = comment.Append("HIJING per3");
AliGenHijing *gener = HijingStandard();
// impact parameter range
gener->SetImpactParameterRange(11.2, 13.2);
break;
case kHijing_per4:
{
- comment = comment.Append("HIJING per4");
AliGenHijing *gener = HijingStandard();
// impact parameter range
gener->SetImpactParameterRange(13.2, 15.);
break;
case kHijing_per5:
{
- comment = comment.Append("HIJING per5");
AliGenHijing *gener = HijingStandard();
// impact parameter range
gener->SetImpactParameterRange(15., 100.);
//
case kHijing_jj25:
{
- comment = comment.Append("HIJING Jet 25 GeV");
AliGenHijing *gener = HijingStandard();
// impact parameter range
gener->SetImpactParameterRange(0., 5.);
case kHijing_jj50:
{
- comment = comment.Append("HIJING Jet 50 GeV");
AliGenHijing *gener = HijingStandard();
// impact parameter range
gener->SetImpactParameterRange(0., 5.);
case kHijing_jj75:
{
- comment = comment.Append("HIJING Jet 75 GeV");
AliGenHijing *gener = HijingStandard();
// impact parameter range
gener->SetImpactParameterRange(0., 5.);
case kHijing_jj100:
{
- comment = comment.Append("HIJING Jet 100 GeV");
AliGenHijing *gener = HijingStandard();
// impact parameter range
gener->SetImpactParameterRange(0., 5.);
case kHijing_jj200:
{
- comment = comment.Append("HIJING Jet 200 GeV");
AliGenHijing *gener = HijingStandard();
// impact parameter range
gener->SetImpactParameterRange(0., 5.);
//
case kHijing_gj25:
{
- comment = comment.Append("HIJING Gamma 25 GeV");
AliGenHijing *gener = HijingStandard();
// impact parameter range
gener->SetImpactParameterRange(0., 5.);
case kHijing_gj50:
{
- comment = comment.Append("HIJING Gamma 50 GeV");
AliGenHijing *gener = HijingStandard();
// impact parameter range
gener->SetImpactParameterRange(0., 5.);
case kHijing_gj75:
{
- comment = comment.Append("HIJING Gamma 75 GeV");
AliGenHijing *gener = HijingStandard();
// impact parameter range
gener->SetImpactParameterRange(0., 5.);
case kHijing_gj100:
{
- comment = comment.Append("HIJING Gamma 100 GeV");
AliGenHijing *gener = HijingStandard();
// impact parameter range
gener->SetImpactParameterRange(0., 5.);
case kHijing_gj200:
{
- comment = comment.Append("HIJING Gamma 200 GeV");
AliGenHijing *gener = HijingStandard();
// impact parameter range
gener->SetImpactParameterRange(0., 5.);
break;
case kHijing_pA:
{
- comment = comment.Append("HIJING pA");
AliGenCocktail *gener = new AliGenCocktail();
break;
case kPythia6:
{
- comment = comment.Append(":Pythia p-p @ 14 TeV");
AliGenPythia *gener = new AliGenPythia(-1);
gener->SetMomentumRange(0,999999);
gener->SetThetaRange(0., 180.);
break;
case kPythia6Jets20_24:
{
- comment = comment.Append(":Pythia jets 20-24 GeV @ 5.5 TeV");
AliGenPythia * gener = new AliGenPythia(-1);
gener->SetEnergyCMS(5500.);// Centre of mass energy
gener->SetProcess(kPyJets);// Process type
break;
case kPythia6Jets24_29:
{
- comment = comment.Append(":Pythia jets 24-29 GeV @ 5.5 TeV");
AliGenPythia * gener = new AliGenPythia(-1);
gener->SetEnergyCMS(5500.);// Centre of mass energy
gener->SetProcess(kPyJets);// Process type
break;
case kPythia6Jets29_35:
{
- comment = comment.Append(":Pythia jets 29-35 GeV @ 5.5 TeV");
AliGenPythia * gener = new AliGenPythia(-1);
gener->SetEnergyCMS(5500.);// Centre of mass energy
gener->SetProcess(kPyJets);// Process type
break;
case kPythia6Jets35_42:
{
- comment = comment.Append(":Pythia jets 35-42 GeV @ 5.5 TeV");
AliGenPythia * gener = new AliGenPythia(-1);
gener->SetEnergyCMS(5500.);// Centre of mass energy
gener->SetProcess(kPyJets);// Process type
break;
case kPythia6Jets42_50:
{
- comment = comment.Append(":Pythia jets 42-50 GeV @ 5.5 TeV");
AliGenPythia * gener = new AliGenPythia(-1);
gener->SetEnergyCMS(5500.);// Centre of mass energy
gener->SetProcess(kPyJets);// Process type
break;
case kPythia6Jets50_60:
{
- comment = comment.Append(":Pythia jets 50-60 GeV @ 5.5 TeV");
AliGenPythia * gener = new AliGenPythia(-1);
gener->SetEnergyCMS(5500.);// Centre of mass energy
gener->SetProcess(kPyJets);// Process type
break;
case kPythia6Jets60_72:
{
- comment = comment.Append(":Pythia jets 60-72 GeV @ 5.5 TeV");
AliGenPythia * gener = new AliGenPythia(-1);
gener->SetEnergyCMS(5500.);// Centre of mass energy
gener->SetProcess(kPyJets);// Process type
break;
case kPythia6Jets72_86:
{
- comment = comment.Append(":Pythia jets 72-86 GeV @ 5.5 TeV");
AliGenPythia * gener = new AliGenPythia(-1);
gener->SetEnergyCMS(5500.);// Centre of mass energy
gener->SetProcess(kPyJets);// Process type
break;
case kPythia6Jets86_104:
{
- comment = comment.Append(":Pythia jets 86-104 GeV @ 5.5 TeV");
AliGenPythia * gener = new AliGenPythia(-1);
gener->SetEnergyCMS(5500.);// Centre of mass energy
gener->SetProcess(kPyJets);// Process type
break;
case kPythia6Jets104_125:
{
- comment = comment.Append(":Pythia jets 105-125 GeV @ 5.5 TeV");
AliGenPythia * gener = new AliGenPythia(-1);
gener->SetEnergyCMS(5500.);// Centre of mass energy
gener->SetProcess(kPyJets);// Process type
break;
case kPythia6Jets125_150:
{
- comment = comment.Append(":Pythia jets 125-150 GeV @ 5.5 TeV");
AliGenPythia * gener = new AliGenPythia(-1);
gener->SetEnergyCMS(5500.);// Centre of mass energy
gener->SetProcess(kPyJets);// Process type
break;
case kPythia6Jets150_180:
{
- comment = comment.Append(":Pythia jets 150-180 GeV @ 5.5 TeV");
AliGenPythia * gener = new AliGenPythia(-1);
gener->SetEnergyCMS(5500.);// Centre of mass energy
gener->SetProcess(kPyJets);// Process type
break;
case kD0PbPb5500:
{
- comment = comment.Append(" D0 in Pb-Pb at 5.5 TeV");
AliGenPythia * gener = new AliGenPythia(10);
gener->SetProcess(kPyD0PbPbMNR);
gener->SetStrucFunc(kCTEQ4L);
break;
case kCharmSemiElPbPb5500:
{
- comment = comment.Append(" Charm in Pb-Pb at 5.5 TeV");
AliGenPythia * gener = new AliGenPythia(10);
gener->SetProcess(kPyCharmPbPbMNR);
gener->SetStrucFunc(kCTEQ4L);
break;
case kBeautySemiElPbPb5500:
{
- comment = comment.Append(" Beauty in Pb-Pb at 5.5 TeV");
AliGenPythia *gener = new AliGenPythia(10);
gener->SetProcess(kPyBeautyPbPbMNR);
gener->SetStrucFunc(kCTEQ4L);
break;
case kCocktailTRD:
{
- comment = comment.Append(" Cocktail for TRD at 5.5 TeV");
AliGenCocktail *gener = new AliGenCocktail();
AliGenParam *jpsi = new AliGenParam(10,
break;
case kPyJJ:
{
- comment = comment.Append(" Jet-jet at 5.5 TeV");
AliGenPythia *gener = new AliGenPythia(-1);
gener->SetEnergyCMS(5500.);
gener->SetProcess(kPyJets);
break;
case kPyGJ:
{
- comment = comment.Append(" Gamma-jet at 5.5 TeV");
AliGenPythia *gener = new AliGenPythia(-1);
gener->SetEnergyCMS(5500.);
gener->SetProcess(kPyDirectGamma);
break;
case kMuonCocktailCent1:
{
- comment = comment.Append(" Muon Cocktail Cent1");
AliGenMUONCocktail * gener = new AliGenMUONCocktail();
gener->SetPtRange(1.0,100.); // Transverse momentum range
gener->SetPhiRange(0.,360.); // Azimuthal angle range
break;
case kMuonCocktailPer1:
{
- comment = comment.Append(" Muon Cocktail Per1");
AliGenMUONCocktail * gener = new AliGenMUONCocktail();
gener->SetPtRange(1.0,100.); // Transverse momentum range
gener->SetPhiRange(0.,360.); // Azimuthal angle range
break;
case kMuonCocktailPer4:
{
- comment = comment.Append(" Muon Cocktail Per4");
AliGenMUONCocktail * gener = new AliGenMUONCocktail();
gener->SetPtRange(1.0,100.); // Transverse momentum range
gener->SetPhiRange(0.,360.); // Azimuthal angle range
break;
case kMuonCocktailCent1HighPt:
{
- comment = comment.Append(" Muon Cocktail HighPt Cent1");
AliGenMUONCocktail * gener = new AliGenMUONCocktail();
gener->SetPtRange(1.0,100.); // Transverse momentum range
gener->SetPhiRange(0.,360.); // Azimuthal angle range
break;
case kMuonCocktailPer1HighPt :
{
- comment = comment.Append(" Muon Cocktail HighPt Per1");
AliGenMUONCocktail * gener = new AliGenMUONCocktail();
gener->SetPtRange(1.0,100.); // Transverse momentum range
gener->SetPhiRange(0.,360.); // Azimuthal angle range
break;
case kMuonCocktailPer4HighPt:
{
- comment = comment.Append(" Muon Cocktail HighPt Per4");
AliGenMUONCocktail * gener = new AliGenMUONCocktail();
gener->SetPtRange(1.0,100.); // Transverse momentum range
gener->SetPhiRange(0.,360.); // Azimuthal angle range
break;
case kMuonCocktailCent1Single:
{
- comment = comment.Append(" Muon Cocktail Single Cent1");
AliGenMUONCocktail * gener = new AliGenMUONCocktail();
gener->SetPtRange(1.0,100.); // Transverse momentum range
gener->SetPhiRange(0.,360.); // Azimuthal angle range
break;
case kMuonCocktailPer1Single :
{
- comment = comment.Append(" Muon Cocktail Single Per1");
AliGenMUONCocktail * gener = new AliGenMUONCocktail();
gener->SetPtRange(1.0,100.); // Transverse momentum range
gener->SetPhiRange(0.,360.); // Azimuthal angle range
break;
case kMuonCocktailPer4Single:
{
- comment = comment.Append(" Muon Cocktail Single Per4");
AliGenMUONCocktail * gener = new AliGenMUONCocktail();
gener->SetPtRange(1.0,100.); // Transverse momentum range
gener->SetPhiRange(0.,360.); // Azimuthal angle range
gGener=gener;
}
break;
+ case kFMD1Flat:
+ {
+ AliGenBox* gener = new AliGenBox(2000);
+ gener->SetPart(kPiPlus);
+ gener->SetMomentumRange(3,4);
+ gener->SetPhiRange(0, 360);
+ gener->SetThetaRange(0.77, 3.08);
+ gGener = gener;
+ }
+ break;
+ case kFMD2Flat:
+ {
+ AliGenBox* gener = new AliGenBox(100);
+ gener->SetPart(kPiPlus);
+ gener->SetMomentumRange(3,4);
+ gener->SetPhiRange(0, 360);
+ gener->SetThetaRange(2.95, 20.42);
+ gGener = gener;
+ }
+ break;
+ case kFMD3Flat:
+ {
+ AliGenBox* gener = new AliGenBox(2000);
+ gener->SetPart(kPiPlus);
+ gener->SetMomentumRange(3,4);
+ gener->SetPhiRange(0, 360);
+ gener->SetThetaRange(155.97, 176.73);
+ gGener = gener;
+ }
+ break;
+ case kFMDFlat:
+ {
+ AliGenCocktail* gener = new AliGenCocktail();
+ gener->SetMomentumRange(3,4);
+ gener->SetPhiRange(0, 360);
+ AliGenBox* gener3 = new AliGenBox(2000);
+ gener3->SetThetaRange(155.97, 176.73);
+ gener3->SetPart(kPiPlus);
+ gener->AddGenerator(gener3, "FMD3", .33);
+ AliGenBox* gener2 = new AliGenBox(2000);
+ gener2->SetThetaRange(2.95, 20.42);
+ gener2->SetPart(kPiPlus);
+ gener->AddGenerator(gener2, "FMD2", .33);
+ AliGenBox* gener1 = new AliGenBox(2000);
+ gener1->SetThetaRange(0.77, 3.08);
+ gener1->SetPart(kPiPlus);
+ gener->AddGenerator(gener1, "FMD1", .34);
+ gGener = gener;
+ }
+ break;
+
default: break;
}
return gGener;
//____________________________________________________________________
void
-ProcessEnvironmentVars()
+ProcessEnvironmentVars(EG_t& eg, Int_t& seed)
{
// Run type
if (gSystem->Getenv("CONFIG_RUN_TYPE")) {
- for (Int_t iRun = 0; iRun < kRunMax; iRun++) {
- if (strcmp(gSystem->Getenv("CONFIG_RUN_TYPE"), pprRunName[iRun])==0) {
- srun = (PprRun_t)iRun;
- cout<<"Run type set to "<<pprRunName[iRun]<<endl;
- }
- }
+ Int_t eg1 = LookupEG(gSystem->Getenv("CONFIG_RUN_TYPE"));
+ if (eg1 >= 0) eg = EG_t(eg1);
}
-
// Random Number seed
if (gSystem->Getenv("CONFIG_SEED")) {
- sseed = atoi(gSystem->Getenv("CONFIG_SEED"));
+ seed = atoi(gSystem->Getenv("CONFIG_SEED"));
}
}
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff