* provided "as is" without express or implied warranty. *
**************************************************************************/
-/* $Id:$ */
+/* $Id$ */
///////////////////////////////////////////////////////////////////
// Implementation of the class for SDD DCS data analysis //
// DCS data for specific SDD module will be stored in this class
TObjArray* arrHV = (TObjArray*) dcsMap->GetValue( fHVDPNames[moduleLoop].Data() );
- if(!arrHV) // There is no record for high voltage in the map
- {
- AliWarning( Form("DCS HV alias %s not found!\n", fHVDPNames[moduleLoop].Data()) );
- continue;
- } /*if*/
+ if(!arrHV) AliWarning( Form("DCS HV alias %s not found!\n", fHVDPNames[moduleLoop].Data()) );
TObjArray* arrMV = (TObjArray*) dcsMap->GetValue( fMVDPNames[moduleLoop].Data() );
- if(!arrMV) // There is no record for medium voltage in the map
- {
- AliWarning( Form("DCS MV alias %s not found!\n", fMVDPNames[moduleLoop].Data()));
- continue;
- } /*if*/
+ if(!arrMV) AliWarning( Form("DCS MV alias %s not found!\n", fMVDPNames[moduleLoop].Data()));
TObjArray* arrOK = (TObjArray*) dcsMap->GetValue( fOKDPNames[moduleLoop].Data() );
- if(!arrOK) // There is no record for OK status in the map
- {
- AliWarning( Form("DCS MOD_OK alias %s not found!\n", fOKDPNames[moduleLoop].Data()));
- continue;
- } /*if*/
+ if(!arrOK) AliWarning( Form("DCS MOD_OK alias %s not found!\n", fOKDPNames[moduleLoop].Data()));
TObjArray* arrTL = (TObjArray*) dcsMap->GetValue( fTLDPNames[moduleLoop].Data() );
- if(!arrTL) // There is no record for temperature on left side in the map
- {
- AliWarning( Form("DCS TEMP_L alias %s not found!\n", fTLDPNames[moduleLoop].Data()));
- continue;
- } /*if*/
+ if(!arrTL) AliWarning( Form("DCS TEMP_L alias %s not found!\n", fTLDPNames[moduleLoop].Data()));
TObjArray* arrTR = (TObjArray*) dcsMap->GetValue( fTRDPNames[moduleLoop].Data() );
- if(!arrTR) // There is no record for temperature on right side in the map
- {
- AliWarning( Form("DCS TEMP_R alias %s not found!\n", fTRDPNames[moduleLoop].Data()));
- continue;
- } /*if*/
+ if(!arrTR) AliWarning( Form("DCS TEMP_R alias %s not found!\n", fTRDPNames[moduleLoop].Data()));
TObjArray* arrStTL = (TObjArray*) dcsMap->GetValue( fTLStDPNames[moduleLoop].Data() );
- if(!arrStTL) // There is no record for TEMP_L status in the map
- {
- AliWarning( Form("DCS TEMP_L_STATE alias %s not found!\n", fTLStDPNames[moduleLoop].Data()));
- continue;
- } /*if*/
+ if(!arrStTL) AliWarning( Form("DCS TEMP_L_STATE alias %s not found!\n", fTLStDPNames[moduleLoop].Data()));
TObjArray* arrStTR = (TObjArray*) dcsMap->GetValue( fTRStDPNames[moduleLoop].Data() );
- if(!arrStTR) // There is no record for TEMP_R status in the map
- {
- AliWarning( Form("DCS TEMP_R_STATE alias %s not found!\n", fTRStDPNames[moduleLoop].Data()));
- continue;
- } /*if*/
-
+ if(!arrStTR) AliWarning( Form("DCS TEMP_R_STATE alias %s not found!\n", fTRStDPNames[moduleLoop].Data()));
lastTLValUpper = -1e-10;
lastTLValLower = +1e+10;
lastMVValLower = +1e+10;
// First value of any DCS variable must be written
- nEntries = arrTL->GetEntries();
- fDCSData[moduleLoop]->SetNPointsTempLeft( nEntries );
+
+ if( arrTL )
+ {
+ nEntries = arrTL->GetEntries();
+ fDCSData[moduleLoop]->SetNPointsTempLeft( nEntries );
// Left temperature array size is set
- for( Int_t tlLoop = 0; tlLoop < nEntries; tlLoop++ )
- { // Left temerature values are copied into the AliITSDCSDataSDD TempLeft array
- valToProcess = (AliDCSValue *)(arrTL->At(tlLoop));
- valToProcessFloat = valToProcess->GetFloat();
+ for( Int_t tlLoop = 0; tlLoop < nEntries; tlLoop++ )
+ { // Left temerature values are copied into the AliITSDCSDataSDD TempLeft array
+ valToProcess = (AliDCSValue *)(arrTL->At(tlLoop));
+ valToProcessFloat = valToProcess->GetFloat();
// Value is readed from the input array
-// /**//**/if( moduleLoop == 259 )
-// /**//**/fprintf( stderr, " lastTLValLower = %f, valToProcessFloat = %f, lastTLValUpper = %f, fTLThresholdFrac = %f\n",
-// /**//**/ lastTLValLower, valToProcessFloat, lastTLValUpper, fTLThresholdFrac );
-
- if( lastTLValLower <= valToProcessFloat && valToProcessFloat <= lastTLValUpper ) continue;
+ if( lastTLValLower <= valToProcessFloat && valToProcessFloat <= lastTLValUpper ) continue;
// Value did not cross the treshold (upper neither lower),
// it is not necessary to store it.
- fDCSData[moduleLoop]->SetValueTempLeft( valToProcess->GetTimeStamp() - fTLDelay, valToProcessFloat );
+ fDCSData[moduleLoop]->SetValueTempLeft( valToProcess->GetTimeStamp() - fTLDelay, valToProcessFloat );
// Value is stored
- lastTLValLower = valToProcessFloat * ( 1.0 - fTLThresholdFrac );
- lastTLValUpper = valToProcessFloat * ( 1.0 + fTLThresholdFrac );
+ lastTLValLower = valToProcessFloat * ( 1.0 - fTLThresholdFrac );
+ lastTLValUpper = valToProcessFloat * ( 1.0 + fTLThresholdFrac );
// New tresholds are set
- counter ++;
- } /*for( tlLoop )*/
-
+ counter ++;
+ } /*for( tlLoop )*/
+ } /*if*/
- nEntries = arrTR->GetEntries();
- fDCSData[moduleLoop]->SetNPointsTempRight( nEntries );
+ if( arrTR )
+ {
+ nEntries = arrTR->GetEntries();
+ fDCSData[moduleLoop]->SetNPointsTempRight( nEntries );
// Right temperature array size is set
- for( Int_t trLoop = 0; trLoop < nEntries; trLoop++ )
- { // Right temerature values are copied into the AliITSDCSDataSDD TempRight array
- valToProcess = (AliDCSValue *)(arrTR->At(trLoop));
- valToProcessFloat = valToProcess->GetFloat();
- // Value is readed from the input array
-
- if( lastTRValLower <= valToProcessFloat && valToProcessFloat <= lastTRValUpper ) continue;
- // Value did not cross the treshold (upper neither lower),
- // it is not necessary to store it.
- fDCSData[moduleLoop]->SetValueTempRight( valToProcess->GetTimeStamp() - fTRDelay, valToProcessFloat );
- // Value is stored
- lastTRValLower = valToProcessFloat * ( 1.0 - fTRThresholdFrac );
- lastTRValUpper = valToProcessFloat * ( 1.0 + fTRThresholdFrac );
- // New tresholds are set
- counter ++;
- } /*for( trLoop )*/
-
+ for( Int_t trLoop = 0; trLoop < nEntries; trLoop++ )
+ { // Right temerature values are copied into the AliITSDCSDataSDD TempRight array
+ valToProcess = (AliDCSValue *)(arrTR->At(trLoop));
+ valToProcessFloat = valToProcess->GetFloat();
+ // Value is readed from the input array
+
+ if( lastTRValLower <= valToProcessFloat && valToProcessFloat <= lastTRValUpper ) continue;
+ // Value did not cross the treshold (upper neither lower),
+ // it is not necessary to store it.
+ fDCSData[moduleLoop]->SetValueTempRight( valToProcess->GetTimeStamp() - fTRDelay, valToProcessFloat );
+ // Value is stored
+ lastTRValLower = valToProcessFloat * ( 1.0 - fTRThresholdFrac );
+ lastTRValUpper = valToProcessFloat * ( 1.0 + fTRThresholdFrac );
+ // New tresholds are set
+ counter ++;
+ } /*for( trLoop )*/
+ } /*if*/
- nEntries = arrHV->GetEntries();
- fDCSData[moduleLoop]->SetNPointsHV( nEntries );
+ if( arrHV )
+ {
+ nEntries = arrHV->GetEntries();
+ fDCSData[moduleLoop]->SetNPointsHV( nEntries );
// HV array size is set
- for( Int_t hvLoop = 0; hvLoop < nEntries; hvLoop++ )
- { // HV values are copied into the AliITSDCSDataSDD HV array
- valToProcess = (AliDCSValue *)(arrHV->At(hvLoop));
- valToProcessFloat = valToProcess->GetFloat();
+ for( Int_t hvLoop = 0; hvLoop < nEntries; hvLoop++ )
+ { // HV values are copied into the AliITSDCSDataSDD HV array
+ valToProcess = (AliDCSValue *)(arrHV->At(hvLoop));
+ valToProcessFloat = valToProcess->GetFloat();
// Value is readed from the input array
- if( lastHVValLower <= valToProcessFloat && valToProcessFloat <= lastHVValUpper ) continue;
+ if( lastHVValLower <= valToProcessFloat && valToProcessFloat <= lastHVValUpper ) continue;
// Value did not cross the treshold (upper neither lower),
// it is not necessary to store it.
- fDCSData[moduleLoop]->SetValueHV( valToProcess->GetTimeStamp() - fHVDelay, valToProcessFloat );
+ fDCSData[moduleLoop]->SetValueHV( valToProcess->GetTimeStamp() - fHVDelay, valToProcessFloat );
// Value is stored
- lastHVValLower = valToProcessFloat * ( 1.0 - fHVThresholdFrac );
- lastHVValUpper = valToProcessFloat * ( 1.0 + fHVThresholdFrac );
+ lastHVValLower = valToProcessFloat * ( 1.0 - fHVThresholdFrac );
+ lastHVValUpper = valToProcessFloat * ( 1.0 + fHVThresholdFrac );
// New tresholds are set
- counter ++;
- } /*for( hvLoop )*/
+ counter ++;
+ } /*for( hvLoop )*/
+ } /*if*/
- nEntries = arrMV->GetEntries();
- fDCSData[moduleLoop]->SetNPointsMV( nEntries );
+
+ if( arrMV )
+ {
+ nEntries = arrMV->GetEntries();
+ fDCSData[moduleLoop]->SetNPointsMV( nEntries );
// MV array size is set
- for( Int_t mvLoop = 0; mvLoop < nEntries; mvLoop++ )
- { // MV values are copied into the AliITSDCSDataSDD MV array
- valToProcess = (AliDCSValue *)(arrMV->At(mvLoop));
- valToProcessFloat = valToProcess->GetFloat();
+ for( Int_t mvLoop = 0; mvLoop < nEntries; mvLoop++ )
+ { // MV values are copied into the AliITSDCSDataSDD MV array
+ valToProcess = (AliDCSValue *)(arrMV->At(mvLoop));
+ valToProcessFloat = valToProcess->GetFloat();
// Value is readed from the input array
- if( lastMVValLower <= valToProcessFloat && valToProcessFloat <= lastMVValUpper ) continue;
+ if( lastMVValLower <= valToProcessFloat && valToProcessFloat <= lastMVValUpper ) continue;
// Value did not cross the treshold (upper neither lower),
// it is not necessary to store it.
- fDCSData[moduleLoop]->SetValueMV( valToProcess->GetTimeStamp() - fMVDelay, valToProcessFloat );
+ fDCSData[moduleLoop]->SetValueMV( valToProcess->GetTimeStamp() - fMVDelay, valToProcessFloat );
// Value is stored
- lastMVValLower = valToProcessFloat * ( 1.0 - fMVThresholdFrac );
- lastMVValUpper = valToProcessFloat * ( 1.0 + fMVThresholdFrac );
+ lastMVValLower = valToProcessFloat * ( 1.0 - fMVThresholdFrac );
+ lastMVValUpper = valToProcessFloat * ( 1.0 + fMVThresholdFrac );
// New treshold is ser
- counter ++;
- } /*for( mvLoop )*/
+ counter ++;
+ } /*for( mvLoop )*/
+
+ } /*if*/
/* Following part of the code is responsibile for the condensing of all status information given by DCS
one (with the time stamp of the earliest one).
*/
-
- Int_t nStTLEntries = arrStTL->GetEntries();
- Int_t nStTREntries = arrStTR->GetEntries();
- Int_t nOKEntries = arrOK->GetEntries();
- // Gets number of _STAT_L, _STAT_R and _OK values stored in dcsMap
+ Int_t nStTLEntries = 0;
+ Int_t nStTREntries = 0;
+ Int_t nOKEntries = 0;
+
+ bool arrStTLcreated = false;
+ bool arrStTRcreated = false;
+ bool arrOKcreated = false;
+
+ if( arrStTL )
+ nStTLEntries = arrStTL->GetEntries();
+ else
+ { arrStTL = new TObjArray; arrStTLcreated = true; }
+
+ if( arrStTR )
+ nStTREntries = arrStTR->GetEntries();
+ else
+ { arrStTR = new TObjArray; arrStTRcreated = true; }
+
+ if( arrOK )
+ nOKEntries = arrOK->GetEntries();
+ else
+ { arrOK = new TObjArray; arrOKcreated = true; }
+ // Gets number of _STAT_L, _STAT_R and _OK values stored in dcsMap. If any array does
+ // not exist, it must be created (and it will be filled by 0 status later)
if( nStTLEntries < 1 )
{ // TObjArray arrStTL is empty. This would cause segmentation violation during
Int_t idxStTL = 0;
Int_t idxStTR = 0;
- Int_t idxOK = 0;
+ Int_t idxOK = 0;
// Input arrays indexes
Int_t tsStTL, tsStTR, tsOK;
fDCSData[moduleLoop]->Compress();
// Size taken by data in AliITSDCSDataSDD object is minimalized
+ if( arrStTRcreated ) delete arrStTR;
+ if( arrStTLcreated ) delete arrStTL;
+ if( arrOKcreated ) delete arrOK;
+
} /*for( iMod )*/
} /*for( iLad )*/
} /*for( iLay )*/
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff