ClassImp(AliITSsegmentationSPD)
-Float_t ColFromZ300(Float_t z) {
+Float_t AliITSsegmentationSPD::ColFromZ300(Float_t z) {
// Get column number for each z-coordinate taking into account the
// extra pixels in z direction assuming 300 micron sized pixels.
Float_t col = 0.0;
return col;
}
//_____________________________________________________________________________
-Float_t ZFromCol300(Int_t col) {
+Float_t AliITSsegmentationSPD::ZFromCol300(Int_t col) {
// same comments as above
// Get z-coordinate for each colunm number
Float_t pitchz = 300.0;
return z;
}
//_____________________________________________________________________________
-Float_t ZpitchFromCol300(Int_t col) {
+Float_t AliITSsegmentationSPD::ZpitchFromCol300(Int_t col) {
// returns Z pixel pitch for 300 micron pixels.
return 300.0;
}
//_____________________________________________________________________________
-Float_t ColFromZ(Float_t z) {
-// hard-wired - keep it like this till we can parametrise
-// and get rid of AliITSgeomSPD425
-// Get column number for each z-coordinate taking into account the
-// extra pixels in z direction
-
+Float_t AliITSsegmentationSPD::ColFromZ(Float_t z) {
+ // hard-wired - keep it like this till we can parametrise
+ // and get rid of AliITSgeomSPD425
+ // Get column number for each z-coordinate taking into account the
+ // extra pixels in z direction
+ Int_t i;
+ Float_t s,col;
+
+ if(z<0||z>fDz){
+ Error("ColFromZ","z=%f outside of range 0.0<=z<fDz=%f",z,fDz);
+ return 0.0; // error
+ } // end if outsize of detector
+ s = 0.0;
+ i = -1;
+ while(z>s){
+ i++;
+ s += fCellSizeZ[i];
+ } // end while
+ s -= fCellSizeZ[i];
+ col = (Float_t) i + (z-s)/fCellSizeZ[i];
+ return col;
+
+/*
Float_t col = 0;
Float_t pitchz = 425;
if( z < 13175) {
} else if( z < 83600) {
col = 161 + (z - 70425)/pitchz;
}
- return TMath::Abs(col);
+ return TMath::Abs(col);*/
}
//_____________________________________________________________________________
-Float_t ZFromCol(Int_t col) {
-// same comments as above
-// Get z-coordinate for each colunm number
-
+Float_t AliITSsegmentationSPD::ZFromCol(Int_t col) {
+ // same comments as above
+ // Get z-coordinate for each colunm number
+ Int_t i;
+ Float_t z;
+
+ if(col<0||col>=fNpz){
+ Error("ZFromCol","col=%d outside of range 0<=col<fNpZ=%d",col,fNpz);
+ return 0.0; // error
+ } // end if outsize of detector
+ z = 0.0;
+ for(i=0;i<col;i++) z += fCellSizeZ[i];
+ z += 0.5*fCellSizeZ[col];
+ return z;
+
+/*
Float_t pitchz = 425;
Float_t z = 0;
if( col >=0 && col <= 30 ) {
z = 69175 + (col -159 + 0.5)*pitchz;
} else if( col >= 161 && col <= 191) {
z = 70425 + (col -161 + 0.5)*pitchz;
- }
+ }
- return z;
+ return z;*/
}
-
-Float_t ZpitchFromCol(Int_t col) {
-// Get pitch size in z direction for each colunm
-
- Float_t pitchz = 425;
- if( col >=32 && col <= 33 ) {
- pitchz = 625;
- } else if( col >= 64 && col <= 65) {
- pitchz = 625;
- } else if( col >= 96 && col <= 97) {
- pitchz = 625;
- } else if( col >= 128 && col <= 129) {
- pitchz = 625;
- } else if( col >= 160 && col <= 161) {
- pitchz = 625;
- }
- return pitchz;
+//______________________________________________________________________
+Float_t AliITSsegmentationSPD::ZpitchFromCol(Int_t col) {
+ // Get pitch size in z direction for each colunm
+
+ Float_t pitchz = 425;
+ if(col < 0){
+ pitchz = 0.0;
+ } else if(col >= 31 && col <= 32) {
+ pitchz = 625;
+ } else if(col >= 63 && col <= 64) {
+ pitchz = 625;
+ } else if(col >= 95 && col <= 96) {
+ pitchz = 625;
+ } else if(col >= 127 && col <= 128) {
+ pitchz = 625;
+ } else if(col >= 159 && col <= 160) {
+ pitchz = 625;
+ } else if(col>=192){
+ pitchz = 0.0;
+ }
+ return pitchz;
}
-
+//______________________________________________________________________
AliITSsegmentationSPD::AliITSsegmentationSPD(){
// Default constructor
fNpx = 0;
fGeom = 0;
}
-//____________________________________________________________________________
+//______________________________________________________________________
AliITSsegmentationSPD::AliITSsegmentationSPD(AliITSgeom *gm){
// Constructor
fCorr=0;
fGeom = gm;
}
-//____________________________________________________________________________
+//______________________________________________________________________
AliITSsegmentationSPD& AliITSsegmentationSPD::operator=(AliITSsegmentationSPD &source){
// = operator
if(this==&source) return *this;
// copy constructor
*this = source;
}
-//------------------------------
+//----------------------------------------------------------------------
+void AliITSsegmentationSPD::SetBinSize(Float_t *x,Float_t *z){
+ // Fills the array of pixel sizes in x, microns
+ // The input array x must have 256 elements.
+ Int_t i;
+
+ for(i=0;i<256;i++) fCellSizeX[i] = x[i];
+ for(i=0;i<280;i++) fCellSizeX[i] = z[i];
+ return;
+}
+//----------------------------------------------------------------------
void AliITSsegmentationSPD::Init300(){
// Initialize infromation for 6 read out chip 300X50 micron pixel SPD
// detectors. This chip is 150 microns thick by 1.28 cm in x by 8.37 cm
fNpx = 256; // The number of X pixel Cell same as in fCellSizeX array size
fNpz = 279; // The number of Z pixel Cell same as in fCellSizeZ array size
for(i=0;i<fNpx;i++) fCellSizeX[i] = 50.0; // microns all the same
- for(i=0;i<fNpz;i++) fCellSizeZ[i] = ZpitchFromCol300(i); // microns
- for(i=fNpz;i<280;i++) fCellSizeZ[i] = 0.0; // zero out rest of array
+ for(i=0;i<280;i++) fCellSizeZ[i] = ZpitchFromCol300(i); // microns
+// for(i=fNpz;i<280;i++) fCellSizeZ[i] = 0.0; // zero out rest of array
fDx = 0;
for(i=0;i<fNpx;i++) fDx += fCellSizeX[i];
fDz = 0;
fNpx = 256; // The number of X pixel Cell same as in fCellSizeX array size
fNpz = 192; // The number of Z pixel Cell same as in fCellSizeZ array size
for(i=0;i<fNpx;i++) fCellSizeX[i] = 50.0; // microns all the same
- for(i=0;i<fNpz;i++) fCellSizeZ[i] = ZpitchFromCol(i); // microns
- for(i=fNpz;i<280;i++) fCellSizeZ[i] = 0.0; // zero out rest of array
+ for(i=0;i<280;i++) fCellSizeZ[i] = ZpitchFromCol(i); // microns
+// for(i=fNpz;i<280;i++) fCellSizeZ[i] = 0.0; // zero out rest of array
fDx = 0;
for(i=0;i<fNpx;i++) fDx += fCellSizeX[i];
fDz = 0;
}
//------------------------------
Float_t AliITSsegmentationSPD::Dpx(Int_t i){
- //returs x pixel pitch for a give pixel
- return fCellSizeX[i];
+ //returs x pixel pitch for a give pixel
+ if(i<0||i>=256) return 0.0;
+ return fCellSizeX[i];
}
//------------------------------
Float_t AliITSsegmentationSPD::Dpz(Int_t i){
- // returns z pixel pitch for a give pixel
- return ZpitchFromCol(i);
+ // returns z pixel pitch for a give pixel
+ if(i<0||i>=280) return 0.0;
+ return fCellSizeZ[i];
}
//------------------------------
void AliITSsegmentationSPD::GetPadIxz(Float_t x,Float_t z,Int_t &ix,Int_t &iz){
Xlist[7]=iX+1;
Zlist[7]=iZ-1;
}
+//______________________________________________________________________
+void AliITSsegmentationSPD::LocalToDet(Float_t x,Float_t z,Int_t &ix,Int_t &iz){
+// Transformation from Geant detector centered local coordinates (cm) to
+// Pixel cell numbers ix and iz.
+// Input:
+// Float_t x detector local coordinate x in cm with respect to the
+// center of the sensitive volume.
+// Float_t z detector local coordinate z in cm with respect to the
+// center of the sensitive volulme.
+// Output:
+// Int_t ix detector x cell coordinate. Has the range 0<=ix<fNpx.
+// Int_t iz detector z cell coordinate. Has the range 0<=iz<fNpz.
+// A value of -1 for ix or iz indecates that this point is outside of the
+// detector segmentation as defined.
+ Int_t i,j;
+ Float_t dx,dz;
+ const Float_t kconv = 1.0E-04; // converts microns to cm.
+
+ dx = -0.5*kconv*Dx();
+ dz = -0.5*kconv*Dz();
+ ix = -1;
+ iz = -1;
+ if(x<dx) return; // outside x range.
+ if(z<dz) return; // outside z range.
+ for(i=0;i<Npx();i++){
+ dx += kconv*fCellSizeX[i];
+ if(x<dx) break;
+ } // end for i
+ if(i>=Npx()) return; // outside x range.
+ for(j=0;j<Npz();j++){
+ dz += kconv*fCellSizeZ[j];
+ if(z<dz) break;
+ } // end for j
+ if(j>=Npz()) return; // outside z range.
+ ix = i;
+ iz = j;
+ return; // Found ix and iz, return.
+}
+//______________________________________________________________________
+void AliITSsegmentationSPD::DetToLocal(Int_t ix,Int_t iz,Float_t &x,Float_t &z)
+{
+// Transformation from Detector cell coordiantes to Geant detector centerd
+// local coordinates (cm).
+// Input:
+// Int_t ix detector x cell coordinate. Has the range 0<=ix<fNpx.
+// Int_t iz detector z cell coordinate. Has the range 0<=iz<fNpz.
+// Output:
+// Float_t x detector local coordinate x in cm with respect to the
+// center of the sensitive volume.
+// Float_t z detector local coordinate z in cm with respect to the
+// center of the sensitive volulme.
+// If ix and or iz is outside of the segmentation range a value of -0.5*Dx()
+// or -0.5*Dz() is returned.
+ Int_t i,j;
+ const Float_t kconv = 1.0E-04; // converts microns to cm.
+
+ x = -0.5*kconv*Dx(); // default value.
+ z = -0.5*kconv*Dz(); // default value.
+ if(ix<0 || ix>=Npx()) return; // outside of detector
+ if(iz<0 || iz>=Npz()) return; // outside of detctor
+ for(i=0;i<ix;i++) x += kconv*fCellSizeX[i]; // sum up to cell ix-1
+ x += 0.5*kconv*fCellSizeX[ix]; // add 1/2 of cell ix for center location.
+ for(j=0;j<iz;j++) z += kconv*fCellSizeZ[j]; // sum up cell iz-1
+ z += 0.5*kconv*fCellSizeZ[iz]; // add 1/2 of cell iz for center location.
+ return; // Found x and z, return.
+}
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff