Coverity warnings
[u/mrichter/AliRoot.git] / ITS / AliITSv11GeometrySSD.h
index a25c8d6..946a85e 100644 (file)
@@ -8,6 +8,7 @@
  * See cxx source for full Copyright notice                               */
 /* $Id$ */
 class TGeoVolume;
+class TGeoShape;
 class TGeoCombiTrans;
 class TGeoMedium;
 class TGeoCompositeShape;
@@ -18,6 +19,7 @@ class TList;
 class TGeoTube;
 class TGeoHMatrix;
 class TGeoTranslation;
+class TGeoRotation;
 class TGeoXtru;
 class TGeoVolumeAssembly;
 #include "AliITSv11Geometry.h"
@@ -66,7 +68,8 @@ private:
   // Variable for Vertical Disalignement of Modules
   /////////////////////////////////////////////////////////////////////////////////
   static const Double_t fgkSSDModuleVerticalDisalignment;  // Vertical Disalignement of Volume
-  static const Double_t fgkSSDModuleVerticalDisalignment2;  // Vertical Disalignement of Volume
+  static const Double_t fgkSSDModuleSideDisalignment;  // Vertical Disalignement of Volume
+  static const Double_t fgkSSDLadderVerticalDisalignment;  // Extra space at ladder support for disalignment
   static const Double_t fgkSSDTolerance;  // SSD Tolerance
   /////////////////////////////////////////////////////////////////////////
   // Layer5 (lengths are in mm and angles in degrees)
@@ -110,9 +113,11 @@ private:
   static const Double_t fgkSSDCapacitor0603Length; // SSD Stiffener Capacitor 0603 Length
   static const Double_t fgkSSDCapacitor0603Width;  // SSD Stiffener Capacitor 0603 Width
   static const Double_t fgkSSDCapacitor0603Height; // SSD Stiffener Capacitor 0603 Height
+  static const Double_t fgkSSDCapacitor0603CapLength; // SSD Stiffener Capacitor 1812 Cap Length 
   static const Double_t fgkSSDCapacitor1812Length; // SSD Stiffener Capacitor 1812 Length 
   static const Double_t fgkSSDCapacitor1812Width;  // SSD Stiffener Capacitor 1812 Width
   static const Double_t fgkSSDCapacitor1812Height; // SSD Stiffener Capacitor 1812 Height
+  static const Double_t fgkSSDCapacitor1812CapLength; // SSD Stiffener Capacitor 1812 Cap Length 
   static const Double_t fgkSSDWireLength;          // SSD Stiffener Wire Length
   static const Double_t fgkSSDWireRadius;          // SSD Stiffener Wire Radius
   static const Double_t fgkSSDConnectorPosition[2];// SSD Connector Position respect to Stiffener
@@ -122,13 +127,14 @@ private:
   static const Double_t fgkSSDConnectorHeight;     // SSD Stiffener Connector Height
   static const Double_t fgkSSDConnectorAlHeight;     // SSD Stiffener Connector Al Height
   static const Double_t fgkSSDConnectorNiHeight;     // SSD Stiffener Connector Ni Height
+  static const Double_t fgkSSDConnectorSnHeight;     // SSD Stiffener Connector Sn Height
   /////////////////////////////////////////////////////////////////////////
   // Flex
   /////////////////////////////////////////////////////////////////////////
   static const Double_t fgkSSDFlexFullLength;      // SSD Flex Full Length
   static const Double_t fgkSSDFlexLength[4];       // SSD Flex Components Length
   static const Double_t fgkSSDFlexWidth[2];        // SSD Flex Components Width
-  static const Double_t fgkSSDFlexHeight[2];       // SSD Flex Layers Heigth
+  static const Double_t fgkSSDFlexHeight[2];       // SSD Flex Layers Height
   static const Double_t fgkSSDFlexAngle;           // SSD Flex Angle 
   static const Double_t fgkSSDFlexHoleLength;      // SSD Flex Hole Length
   static const Double_t fgkSSDFlexHoleWidth;       // SSD Flex Hole Width
@@ -138,6 +144,7 @@ private:
   // SSD Ladder Cable 
   /////////////////////////////////////////////////////////////////////////////////
   static const Double_t fgkSSDLadderCableWidth;    // SSD Ladder Cable Width
+  static const Double_t fgkSSDLadderCableHeight[2];  // SSD Ladder Cable Height (thickness)
   /////////////////////////////////////////////////////////////////////////
   // SSD Module Components 
   /////////////////////////////////////////////////////////////////////////
@@ -211,6 +218,7 @@ private:
   /////////////////////////////////////////////////////////////////////////
   //Parameters for Carbon Fiber Lower Support (lengths are in mm)
   /////////////////////////////////////////////////////////////////////////
+  static const Double_t fgkLowerSupportToSensorZ;                   // Distance from lower support to sensor center
   static const Double_t fgkCarbonFiberLowerSupportWidth;            // Lower Support of Carbon Fiber Width
   static const Double_t fgkCarbonFiberLowerSupportLowerLenght;      // Lower Support of Carbon Fiber Length
   static const Double_t fgkCarbonFiberLowerSupportHeight;           // Lower Support of Carbon Fiber Height
@@ -255,7 +263,7 @@ private:
   static const Double_t fgkSSDMountingBlockHoleTubeWidth[2];    // SSD Mounting Block Hole Tube Width   
   static const Double_t fgkSSDMountingBlockHoleRadius;          // SSD Mounting Block Hole radius  
   static const Double_t fgkSSDMountingBlockScrewHoleEdge;       // SSD Mounting Block Screw Hole Edge  
-  static const Double_t fgkSSDMountingBlockScrewHoleHeigth;     // SSD Mounting Block Screw Hole Height  
+  static const Double_t fgkSSDMountingBlockScrewHoleHeight;     // SSD Mounting Block Screw Hole Height  
   static const Double_t fgkSSDMountingBlockScrewHoleRadius[2];  // SSD Mounting Block Screw Hole Radii
   /////////////////////////////////////////////////////////////////////////
   // SSD Mounting Block Clip Parameters (lengths are in mm and angles in degrees)
@@ -269,10 +277,10 @@ private:
   // SSD Mounting Block Support Parameters (lengths are in mm and angles in degrees)
   /////////////////////////////////////////////////////////////////////////////////
   static const Double_t fgkMountingBlockSupportWidth[2]; // SSD Mounting Block Support Width
-  static const Double_t fgkMountingBlockSupportDownHeight; // SSD Mounting Block Support Down Heigth
+  static const Double_t fgkMountingBlockSupportDownHeight; // SSD Mounting Block Support Down Height
   static const Double_t fgkMountingBlockSupportRadius[2];  // SSD Mounting Block Support Radius
-  static const Double_t fgkMountingBlockSupportUpHeight[2]; // SSD Mounting Block Support Heigth
-  static const Double_t fgkLadderSupportHeigth;            // SSD Ladder Support Width
+  static const Double_t fgkMountingBlockSupportUpHeight[2]; // SSD Mounting Block Support Height
+  static const Double_t fgkLadderSupportHeight;            // SSD Ladder Support Width
   static const Double_t fgkLadderSupportRingLay5Position;  // SSD Ladder Support Ring Position Layer5 respect to ITS center
   static const Double_t fgkLadderSupportRingLay6Position;  // SSD Ladder Support Ring Position Layer6 respect to ITS center
   /////////////////////////////////////////////////////////////////////////////////
@@ -399,7 +407,7 @@ private:
   static const Double_t fgkSSDPatchPanel2RB24ITSDistance;   // Patch Panel RB24 Position 
   static const Double_t fgkSSDPatchPanel2RB26Radius; // Patch Panel Radius 
   static const Double_t fgkSSDPatchPanel2RB24Radius; // Patch Panel Radius
-  static const Double_t fgkSSDPatchPanelHeigth; // Patch Panel Height
+  static const Double_t fgkSSDPatchPanelHeight; // Patch Panel Height
   static const Double_t fgkSSDCableMaterialBudgetHeight; // SSD Cable Material Budget
   /////////////////////////////////////////////////////////////////////////
   // Private methods for private members generation
@@ -423,13 +431,12 @@ private:
   TGeoVolume* GetSSDEndFlex();                 // Method generating EndFlex
   TGeoVolume* GetSSDMountingBlock();   // Method generating Mounting Block
   TGeoVolume* GetMountingBlockClip() const;   // Method generating Mounting Block Clip
-  TList* GetCoolingTubeList()const;                    // Method generating list of Tubes
+  void CreateCoolingTubes();                   // Create/set cooling tubes 
   TGeoVolume* GetSSDCoolingBlock(Int_t nedges); 
                                                                            // Method generating StiffenerFlex
-  TGeoVolume* GetSSDChipCables(Double_t SSDChipCablesHeigth, Int_t nedges); 
+  void GetSSDChipCables(TGeoVolume *&cableL, TGeoVolume *&cableR, Double_t SSDChipCablesHeigth, Int_t nedges); 
                                                                                // Method setting ChipCables
-  TList* GetSSDChipSystem();                   // Method setting Chip System
-  TGeoVolume* GetSSDChips() const;     // Method generating Chips
+  TGeoVolume* GetSSDChip() const;     // Method generating Chips
   TList* GetLadderCableSegment(Double_t ssdendladdercablelength); 
                                                                                // Method generating LadderCableSegment
   TGeoVolume* GetLadderCable(Int_t n, Double_t ssdendladdercablelength); 
@@ -447,15 +454,15 @@ private:
   TGeoVolume** EndCapSupport();        // End Cap Support Layer 5 and Layer 6
   void SetEndCapSupportAssembly();     // EndCap Support + End Cap Layer 5 and 6
   TGeoVolume* GetEndCapEffectiveCables(Double_t radiusmin, Double_t radiusmax, 
-                                                                          Double_t width,Int_t ncables,char* volname); // End Cap Effective HV Cables
+                                                                          Double_t width,Int_t ncables,const char* volname); // End Cap Effective HV Cables
   TGeoXtru* GetArcShape(Double_t phi, Double_t rmin, 
                                            Double_t rmax, Int_t nedges, Double_t height); 
                                                                                //Auxiliary Method for Arc Shape
   TGeoArb8* GetArbShape(TVector3* vertexpos[],Double_t* width, 
-                        Double_t height,char* shapename,Int_t isign = 1) const;
+                        Double_t height,const char* shapename,Int_t isign = 1) const;
                                                                           // Method generating an Arb shape 
-  TGeoXtru* GetScrewShape(Double_t* radius,Int_t* edgesnumber,Double_t* section) const;// Method Generating the Screw Shape  
-  TGeoXtru* GetHoleShape(Double_t radius, Int_t nedges, Double_t *section) const;// Method Generating the Hole Shape  
+  TGeoShape* GetScrewShape(Double_t* radius,Int_t* edgesnumber,Double_t* section) const;// Method Generating the Screw Shape  
+  TGeoShape* GetHoleShape(Double_t radius, Int_t nedges, Double_t *section) const;// Method Generating the Hole Shape  
   TVector3* GetReflection(TVector3* vector,Double_t* param) const; 
                                                                                // Given an axis specified by param,
                                                                                // it gives the reflection of the point respect to the axis
@@ -473,6 +480,7 @@ private:
   TGeoMedium* fSSDStiffenerConnectorMedium;      // SSD Stiffener Connector Medium 
   TGeoMedium* fSSDStiffener0603CapacitorMedium;  // SSD Stiffener Capacitor 0603 Medium 
   TGeoMedium* fSSDStiffener1812CapacitorMedium;  // SSD Stiffener Capacitor 1812 Medium 
+  TGeoMedium* fSSDStiffenerCapacitorCapMedium;  // SSD Stiffener Capacitor Cap Medium 
   TGeoMedium* fSSDStiffenerHybridWireMedium;     // SSD Stiffener Wire Medium  
   TGeoMedium* fSSDKaptonFlexMedium;              // SSD Flex Kapton Layer Medium    
   TGeoMedium* fSSDAlTraceFlexMedium;             // SSD Flex Al Layer Medium 
@@ -492,6 +500,7 @@ private:
   TGeoMedium* fSSDRohaCellCone;                  // Medium for SSD Ring Cone Support
   TGeoMedium* fSSDAir;                                                  // SSD Air
   TGeoMedium* fSSDCopper;                        // Copper for SSD Cables
+  TGeoMedium* fSSDSn;                            // Tin for SSD solderings
   /////////////////////////////////////////////////////////////////////////
   Bool_t fCreateMaterials;               // Bool variable which verifies if materials have been created
   Bool_t fTransformationMatrices; // Bool variable which verifies if matrices have been allocated
@@ -552,12 +561,11 @@ private:
   /////////////////////////////////////////
   // Cooling Tube
   /////////////////////////////////////////
-  static const Int_t fgkcoolingtubenumber = 3;                         // Coling Tube Number
-  TGeoHMatrix** fcoolingtubematrix[fgkcoolingtubenumber+1];  // Cooling Tube Matrix
-  TGeoVolume* fcoolingtube[fgkcoolingtubenumber];                      // Ladder Cooling Tube 
-  static const Int_t fgkendladdercoolingtubenumber = 5;                // End Ladder Cooling Tube Number       
+  TGeoHMatrix* fcoolingtubematrix[2];  // Cooling Tube Matrix
+  TGeoVolume* fcoolingtube;                    // Ladder Cooling Tube 
+  static const Int_t fgkendladdercoolingtubenumber = 2;                // End Ladder Cooling Tube Number       
   TGeoVolume* fendladdercoolingtube[fgkendladdercoolingtubenumber];    // End Ladder Cooling Tube
-  TGeoHMatrix** fendladdercoolingtubematrix[2];  //End ladder cooling tube matrix
+  TGeoHMatrix* fendladdercoolingtubematrix[fgkendladdercoolingtubenumber][2];  //End ladder cooling tube matrix
   /////////////////////////////////////////
   // End Ladder Components
   /////////////////////////////////////////
@@ -645,7 +653,7 @@ private:
   /////////////////////////////////////////////////////////////////////////
   // SSD Cone
   /////////////////////////////////////////////////////////////////////////
-  TGeoVolumeAssembly* fSSDCone;  // SSD Cone  
+  TGeoVolumeAssembly*fSSDCone;  // SSD Cone  
   /////////////////////////////////////////////////////////////////////////
   // Color Display 
   /////////////////////////////////////////////////////////////////////////
@@ -654,12 +662,13 @@ private:
   Int_t fColorPhynox;         //  ===
   Int_t fColorSilicon;        //  ===
   Int_t fColorAl;             //  ===
+  Int_t fColorNiSn;           //  ===
   Int_t fColorKapton;         //  ===
   Int_t fColorPolyhamide;     //  ===
   Int_t fColorStiffener;      //  ===
   Int_t fColorEpoxy;          //  ===
   Int_t fColorWater;             //  ===
   Int_t fColorG10;            //  ===
-ClassDef(AliITSv11GeometrySSD, 3)     // ITS v11 SSD geometry
+ClassDef(AliITSv11GeometrySSD, 5)     // ITS v11 SSD geometry
 };
 #endif