/**************************************************************************
- * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
+ * Copyright(c) 2007-2009, ALICE Experiment at CERN, All rights reserved. *
* *
* Author: The ALICE Off-line Project. *
* Contributors are mentioned in the code where appropriate. *
* provided "as is" without express or implied warranty. *
**************************************************************************/
-// $Id$
-// $Log$
-// Revision 1.3 2007/05/08 16:57:42 masera
-// Updates concerning the geometry: versioning system, new V11hybrid version, bug fixes (B.Nilsend and L. Gaudichet
-//
+/* $Id$ */
+
//========================================================================
//
// Geometry of the Inner Tracking System
-//
+// ---------------------------------------
// This geometry is a mix between the old geometry (originally coded
// in AliITSvPPRasymmFMD) and the new TGeo geometry (v11).
// The flags which indicate whether the old or the new part is used
//
//========================================================================
+
+
+// $Log: AliITSv11Hybrid.cxx,v $
+// Revision 1.14 2008/01/10 11:14:13 masera
+// SPD/SDD thermal shield and SPD cones updated (M. Sitta)
+//
+// Revision 1.13 2007/12/20 16:58:46 masera
+// bug fixes for SPD1 and SDD1 (A. Dainese)
+//
+// Revision 1.12 2007/12/17 14:48:23 masera
+// Thermal shield between SPD and SDD (M. Sitta)
+//
+// Revision 1.11 2007/11/22 08:32:48 masera
+// Second thermal shield updated in agreement with the installed one. Correction concerning the chemical composition of Rohacell (M.Sitta)
+//
+// Revision 1.10 2007/11/19 17:01:26 masera
+// SSD ladder supports + endcaps systems (E. Cattaruzza)
+//
+// Revision 1.9 2007/10/21 19:22:53 masera
+// Coding conventions
+//
+// Revision 1.8 2007/10/21 18:59:10 masera
+// SPD new geometry added to Hybrid V11
+//
+// Revision 1.7 2007/08/24 14:32:57 hristov
+// Introduction of SPD half-stave volumes, cleaning and new code (in relation to new SPD geometry) in AliITSv11Hybrid (Ludovic)
+//
+// Revision 1.6 2007/07/27 08:12:39 morsch
+// Write all track references into the same branch.
+//
+// Revision 1.5 2007/06/28 10:17:25 masera
+// Introduction of the new SSD geometry in simulation (AliITSv11Hybrid) and suppression of overlaps between old and new parts
+//
+// Revision 1.4 2007/05/09 20:40:41 masera
+// Bug fix (V11Hybrid geometry)
+//
+// Revision 1.3 2007/05/08 16:57:42 masera
+// Updates concerning the geometry: versioning system, new V11hybrid version, bug fixes (B.Nilsend and L. Gaudichet
+//
+
#include <TClonesArray.h>
-#include <TGeometry.h>
-#include <TLorentzVector.h>
+#include <TGeoGlobalMagField.h>
+#include <TGeoManager.h>
#include <TGeoMatrix.h>
#include <TGeoPhysicalNode.h>
-#include <TArrayD.h>
-#include <TArrayF.h>
-#include <TString.h>
-#include <TNode.h>
-#include <TTUBE.h>
-#include <TGeoManager.h>
#include <TGeoVolume.h>
+#include <TGeoXtru.h>
+#include <TLorentzVector.h>
+#include <TString.h>
#include <TVirtualMC.h>
#include "AliITS.h"
#include "AliITSDetTypeSim.h"
#include "AliITSgeom.h"
-#include "AliITSgeomSDD.h"
-#include "AliITSgeomSPD.h"
-#include "AliITSgeomSSD.h"
#include "AliITShit.h"
-#include "AliITSresponseSDD.h"
#include "AliITSCalibrationSDD.h"
-#include "AliITSCalibrationSPD.h"
-#include "AliITSCalibrationSSD.h"
#include "AliITSsegmentationSDD.h"
#include "AliITSsegmentationSPD.h"
#include "AliITSsegmentationSSD.h"
#include "AliRun.h"
#include "AliTrackReference.h"
#include "AliITSInitGeometry.h"
+#include "AliITSv11GeometrySPD.h"
#include "AliITSv11GeometrySDD.h"
+#include "AliITSv11GeometrySSD.h"
+#include "AliITSv11GeometrySupport.h"
+#include "AliGeomManager.h"
-#define GEANTGEOMETRY kTRUE
-
ClassImp(AliITSv11Hybrid)
//______________________________________________________________________
AliITSv11Hybrid::AliITSv11Hybrid():
- AliITS(),
- fGeomDetOut(kFALSE),
- fGeomDetIn(kFALSE),
fByThick(kTRUE),
fMajorVersion(IsVersion()),
fMinorVersion(-1),
fFluid(0),
fIDMother(0),
fInitGeom((AliITSVersion_t)fMajorVersion,fMinorVersion),
- fSDDgeom(0)
+ fSPDgeom(0),
+ fSDDgeom(0),
+ fSSDgeom(0),
+ fSupgeom(0)
{
// Standard default constructor
// Inputs:
// none.
// Return:
// none.
- Int_t i;
- for(i=0;i<60;i++) fRead[i] = '\0';
- for(i=0;i<60;i++) fWrite[i] = '\0';
- for(i=0;i<60;i++) fEuclidGeomDet[i] = '\0';
- strncpy(fRead,"$ALICE_ROOT/ITS/ITSgeometry_vPPRasymmFMD.det",60);
}
+
//______________________________________________________________________
-AliITSv11Hybrid::AliITSv11Hybrid(const char *name, const char *title)
+AliITSv11Hybrid::AliITSv11Hybrid(const char *title)
: AliITS("ITS", title),
- fGeomDetOut(kFALSE),
- fGeomDetIn(kFALSE),
fByThick(kTRUE),
fMajorVersion(IsVersion()),
- fMinorVersion(0),
- fDet1(0),
- fDet2(0),
- fChip1(0),
- fChip2(0),
+ fMinorVersion(1),
+ fDet1(200.0),
+ fDet2(200.0),
+ fChip1(150.0),
+ fChip2(150.0),
fRails(0),
- fFluid(0),
+ fFluid(1),
fIDMother(0),
fInitGeom((AliITSVersion_t)fMajorVersion,fMinorVersion),
- fSDDgeom(0) {
+ fSPDgeom(0),
+ fSDDgeom(0),
+ fSSDgeom(0),
+ fSupgeom(0)
+{
// Standard constructor for the v11Hybrid geometry.
// Inputs:
- // const char * name Ignored, set to "ITS"
// const char * title Arbitrary title
// Outputs:
// none.
// Return:
// none.
Int_t i;
+
+ fSPDgeom = new AliITSv11GeometrySPD();
+ fSDDgeom = new AliITSv11GeometrySDD(0);
+ fSSDgeom = new AliITSv11GeometrySSD();
+ fSupgeom = new AliITSv11GeometrySupport();
fIdN = 6;
fIdName = new TString[fIdN];
- fIdName[0] = name; // removes warning message
- fIdName[0] = "ITS1";
- fIdName[1] = "ITS2";
+
+ if (AliITSInitGeometry::SPDIsTGeoNative()) {
+ fIdName[0] = fSPDgeom->GetSenstiveVolumeName1();
+ fIdName[1] = fSPDgeom->GetSenstiveVolumeName2();
+ } else {
+ fIdName[0] = "ITS1";
+ fIdName[1] = "ITS2";
+ }
if (AliITSInitGeometry::SDDIsTGeoNative()) {
fIdName[2] = fSDDgeom->GetSenstiveVolumeName3();
fIdName[2] = "ITS3";
fIdName[3] = "ITS4";
}
+
+ if (AliITSInitGeometry::SSDIsTGeoNative()) {
+ fIdName[4] = fSSDgeom->GetSenstiveVolumeName5();
+ fIdName[5] = fSSDgeom->GetSenstiveVolumeName6();
+ } else {
+ fIdName[4] = "ITS5";
+ fIdName[5] = "ITS6";
+ }
- fIdName[4] = "ITS5";
- fIdName[5] = "ITS6";
fIdSens = new Int_t[fIdN];
for(i=0;i<fIdN;i++) fIdSens[i] = 0;
SetThicknessDet1();
SetThicknessChip2();
SetDensityServicesByThickness();
- fEuclidGeometry="$ALICE_ROOT/ITS/ITSgeometry_vPPRasymm2.euc";
- strncpy(fEuclidGeomDet,"$ALICE_ROOT/ITS/ITSgeometry_vPPRasymm2.det",60);
- strncpy(fRead,fEuclidGeomDet,60);
- strncpy(fWrite,fEuclidGeomDet,60);
- strncpy(fRead,"$ALICE_ROOT/ITS/ITSgeometry_vPPRasymmFMD.det",60);
+}
+//______________________________________________________________________
+AliITSv11Hybrid::AliITSv11Hybrid(const char *name, const char *title)
+ : AliITS("ITS", title),
+ fByThick(kTRUE),
+ fMajorVersion(IsVersion()),
+ fMinorVersion(1),
+ fDet1(200.0),
+ fDet2(200.0),
+ fChip1(150.0),
+ fChip2(150.0),
+ fRails(0),
+ fFluid(1),
+ fIDMother(0),
+ fInitGeom((AliITSVersion_t)fMajorVersion,fMinorVersion),
+ fSPDgeom(0),
+ fSDDgeom(0),
+ fSSDgeom(0),
+ fSupgeom(0)
+{
+ // Standard constructor for the v11Hybrid geometry.
+ // Inputs:
+ // const char * name Ignored, set to "ITS"
+ // const char * title Arbitrary title
+ // Outputs:
+ // none.
+ // Return:
+ // none.
+ Int_t i;
+
+ fSPDgeom = new AliITSv11GeometrySPD();
fSDDgeom = new AliITSv11GeometrySDD(0);
+ fSSDgeom = new AliITSv11GeometrySSD();
+ fSupgeom = new AliITSv11GeometrySupport();
+
+ fIdN = 6;
+ fIdName = new TString[fIdN];
+
+ (void) name; // removes warning message
+
+ if (AliITSInitGeometry::SPDIsTGeoNative()) {
+ fIdName[0] = fSPDgeom->GetSenstiveVolumeName1();
+ fIdName[1] = fSPDgeom->GetSenstiveVolumeName2();
+ } else {
+ fIdName[0] = "ITS1";
+ fIdName[1] = "ITS2";
+ }
+
+ if (AliITSInitGeometry::SDDIsTGeoNative()) {
+ fIdName[2] = fSDDgeom->GetSenstiveVolumeName3();
+ fIdName[3] = fSDDgeom->GetSenstiveVolumeName4();
+ } else {
+ fIdName[2] = "ITS3";
+ fIdName[3] = "ITS4";
+ }
+
+ if (AliITSInitGeometry::SSDIsTGeoNative()) {
+ fIdName[4] = fSSDgeom->GetSenstiveVolumeName5();
+ fIdName[5] = fSSDgeom->GetSenstiveVolumeName6();
+ } else {
+ fIdName[4] = "ITS5";
+ fIdName[5] = "ITS6";
+ }
+
+ fIdSens = new Int_t[fIdN];
+ for(i=0;i<fIdN;i++) fIdSens[i] = 0;
+ SetThicknessDet1();
+ SetThicknessDet2();
+ SetThicknessChip1();
+ SetThicknessChip2();
+ SetDensityServicesByThickness();
+
}
+
//______________________________________________________________________
AliITSv11Hybrid::~AliITSv11Hybrid() {
// Standard destructor
// none.
// Return:
// none.
+ delete fSPDgeom;
delete fSDDgeom;
+ delete fSSDgeom;
+ delete fSupgeom;
}
//______________________________________________________________________
-void AliITSv11Hybrid::SetT2Lmatrix(const char *name, Double_t dAlpha,
- Double_t dxSign, Double_t yShift, Bool_t yFlip, Bool_t yRot180)
+void AliITSv11Hybrid::SetT2Lmatrix(Int_t uid, Double_t yShift,
+ Bool_t yFlip, Bool_t yRot180)
const {
//
//
// This function is used in AddAlignableVolumes()
- TGeoPNEntry *alignableEntry = gGeoManager->GetAlignableEntry(name);
- const char *path = alignableEntry->GetTitle();
-
- if (!gGeoManager->cd(path))
- AliFatal(Form("Volume path %s not valid!",path));
- TGeoHMatrix* globMatrix = gGeoManager->GetCurrentMatrix();
+ TGeoPNEntry *alignableEntry = gGeoManager->GetAlignableEntryByUID(uid);
+ TGeoHMatrix* globMatrix = alignableEntry->GetGlobalOrig();
Double_t *gtrans = globMatrix->GetTranslation(), rotMatrix[9];
memcpy(&rotMatrix[0], globMatrix->GetRotationMatrix(), 9*sizeof(Double_t));
- Double_t al = TMath::ATan2(rotMatrix[1],rotMatrix[0]) + dAlpha;
+ Double_t al = TMath::ATan2(rotMatrix[1],rotMatrix[0]);
if (yRot180) {
- al = TMath::ATan2(rotMatrix[1],-rotMatrix[0]) + dAlpha;
+ al = TMath::ATan2(rotMatrix[1],-rotMatrix[0]);
}
+ Double_t xShift = gtrans[0]*TMath::Cos(al)+gtrans[1]*TMath::Sin(al);
+ Double_t zShift = -gtrans[2];
TGeoHMatrix *matLtoT = new TGeoHMatrix;
- matLtoT->SetDx( dxSign*(gtrans[0]*TMath::Cos(al)+gtrans[1]*TMath::Sin(al)) ); // translation
+ matLtoT->SetDx( xShift ); // translation
matLtoT->SetDy( yShift );
- matLtoT->SetDz(-gtrans[2]);
+ matLtoT->SetDz( zShift );
rotMatrix[0]= 0; rotMatrix[1]= 1; rotMatrix[2]= 0; // + rotation
rotMatrix[3]= 1; rotMatrix[4]= 0; rotMatrix[5]= 0;
rotMatrix[6]= 0; rotMatrix[7]= 0; rotMatrix[8]=-1;
if (yFlip) rotMatrix[3] = -1; // flipping in y (for SPD1)
+ if (yFlip) rotMatrix[1] = -1; // flipping in y (for SPD1)
if (yRot180) { // rotation of pi around the axis perpendicular to the wafer
+ if (yFlip) matLtoT->SetDx( -xShift ); // flipping in y (for SPD1)
matLtoT->SetDy( -yShift );
- rotMatrix[3] = -1;
- matLtoT->SetDz(gtrans[2]);
+ matLtoT->SetDz( -zShift );
rotMatrix[8]=1;
+ rotMatrix[3] = -1;
+ if (yFlip) rotMatrix[3] = 1; // flipping in y (for SPD1)
}
TGeoRotation rot;
delete matLtoT;
alignableEntry->SetMatrix(matTtoL);
}
+
//______________________________________________________________________
-void AliITSv11Hybrid::AddAlignableVolumes() const
-{
- //
+void AliITSv11Hybrid::AddAlignableVolumes() const{
// Creates entries for alignable volumes associating the symbolic volume
// name with the corresponding volume path.
//
// system
// For this, this function has to run before the misalignment because we
// are using the ideal positions in the AliITSgeom object.
+ // Inputs:
+ // none.
+ // Outputs:
+ // none.
+ // Return:
+ // none.
AliInfo("Add ITS alignable volumes");
return;
}
- if( !gGeoManager->SetAlignableEntry("ITS","ALIC_1/ITSV_1") )
- AliFatal("Unable to set alignable entry!!");
+ AliGeomManager::ELayerID layerId;
+ Int_t modUID, modnum;
- //Double_t al, *gtrans, rotMatrix[9];
+ if( !gGeoManager->SetAlignableEntry("ITS","ALIC_1/ITSV_1") )
+ AliFatal(Form("Unable to set alignable entry ! %s :: %s",
+ "ITS","ALIC_1/ITSV_1"));
TString strSPD = "ITS/SPD";
TString strSDD = "ITS/SDD";
TString strSSD = "ITS/SSD";
TString strStave = "/Stave";
+ TString strHalfStave = "/HalfStave";
TString strLadder = "/Ladder";
TString strSector = "/Sector";
TString strSensor = "/Sensor";
TString strEntryName1;
TString strEntryName2;
TString strEntryName3;
+ TString strEntryName4;
- //===== SPD layer1 =====
- {
- TString str0 = "ALIC_1/ITSV_1/ITSD_1/IT12_1/I12B_";
- TString str1 = "/I10B_";
- TString str2 = "/I107_";
+ //===== SPD layers =====
+
+ if (AliITSInitGeometry::SPDIsTGeoNative()) { // new SPD geometry
+
+ TString str0 = "ALIC_1/ITSV_1/ITSSPD_1/ITSSPDCarbonFiberSectorV_";
+ TString str1 = "/ITSSPDSensitiveVirtualvolumeM0_1/ITSSPDlay1-Stave_";
+ TString str1Bis = "/ITSSPDhalf-Stave";
+ TString str1Tierce = "_1";
+ TString str2 = "/ITSSPDlay1-Ladder_";
TString sector;
TString stave;
+ TString halfStave;
TString module;
- for(Int_t c1 = 1; c1<=10; c1++){
+ layerId = AliGeomManager::kSPD1;
+ modnum = 0;
+
+ for(Int_t cSect = 0; cSect<10; cSect++) {
sector = str0;
- sector += c1; // this is one full sector
+ sector += cSect+1; // this is one full sector
strEntryName1 = strSPD;
strEntryName1 += 0;
strEntryName1 += strSector;
- strEntryName1 += (c1-1);
+ strEntryName1 += cSect;
if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),sector.Data()))
- AliFatal("Unable to set alignable entry!!");
- //printf("%s == %s\n",strEntryName1.Data(),sector.Data());
-
- for(Int_t c2 =1; c2<=2; c2++){
+ AliFatal(Form("New lay 1: Unable to set alignable entry 1! %s::%s",
+ strEntryName1.Data(),sector.Data()));
+
+ for(Int_t cStave=0; cStave<2; cStave++) {
stave = sector;
stave += str1;
- stave += c2;
+ stave += cStave+1;
strEntryName2 = strEntryName1;
strEntryName2 += strStave;
- strEntryName2 += (c2-1);
- if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),stave.Data()))
- AliFatal("Unable to set alignable entry!!");
- //printf("%s == %s\n",strEntryName2.Data(),stave.Data()); // this is a stave
+ strEntryName2 += cStave;
+
+ for(Int_t cHS=0; cHS<2; cHS++) {
+
+ halfStave = stave;
+ halfStave += str1Bis;
+ halfStave += cHS;
+ halfStave += str1Tierce;
+ strEntryName3 = strEntryName2;
+ strEntryName3 += strHalfStave;
+ strEntryName3 += cHS;
+
+ if(!gGeoManager->SetAlignableEntry(strEntryName3.Data(),
+ halfStave.Data()))
+ AliFatal(Form("New lay 1: Unable to set alignable entry 3! %s::%s",
+ strEntryName3.Data(),halfStave.Data()));
- for(Int_t c3 =1; c3<=4; c3++){
+ for(Int_t cLad=0; cLad<2; cLad++) {
- module = stave;
- module += str2;
- module += c3;
+ modUID = AliGeomManager::LayerToVolUID(layerId,modnum++);
+ module = halfStave;
+ module += str2;
+ module += cLad+cHS*2+1;
+ strEntryName4 = strEntryName3;
+ strEntryName4 += strLadder;
+ strEntryName4 += cLad+cHS*2;
+ if(!gGeoManager->SetAlignableEntry(strEntryName4.Data(),module.Data(),modUID))
+ AliFatal(Form("New lay 1: Unable to set alignable entry 4! %s::%s",
+ strEntryName4.Data(),module.Data()));
+
+ SetT2Lmatrix(modUID, 0.0081, kTRUE, kTRUE);
+ // 0.0081 is the shift between the centers of alignable
+ // and sensitive volumes. It is directly extracted from
+ // the new SPD geometry
+ } // end for cLad
+ } // end for cHS
+ } // end for cStave
+ } // end for cSect
+
+ layerId = AliGeomManager::kSPD2;
+ modnum = 0;
+ str1 = "/ITSSPDSensitiveVirtualvolumeM0_1/ITSSPDlay2-Stave_";
+ str2 = "/ITSSPDlay2-Ladder_";
+
+ for(Int_t cSect = 0; cSect<10; cSect++) {
+
+ sector = str0;
+ sector += cSect+1; // this is one full sector
+ strEntryName1 = strSPD;
+ strEntryName1 += 1;
+ strEntryName1 += strSector;
+ strEntryName1 += cSect;
+
+ for(Int_t cStave=0; cStave<4; cStave++) {
+
+ stave = sector;
+ stave += str1;
+ stave += cStave+1;
+ strEntryName2 = strEntryName1;
+ strEntryName2 += strStave;
+ strEntryName2 += cStave;
+
+ for(Int_t cHS=0; cHS<2; cHS++) {
+
+ halfStave = stave;
+ halfStave += str1Bis;
+ halfStave += cHS;
+ halfStave += str1Tierce;
strEntryName3 = strEntryName2;
- strEntryName3 += strLadder;
- strEntryName3 += (c3-1);
- if(!gGeoManager->SetAlignableEntry(strEntryName3.Data(),module.Data()))
- AliFatal("Unable to set alignable entry!!");
- //printf("%s == %s\n",strEntryName3.Data(),module.Data());
-
- SetT2Lmatrix(strEntryName3.Data(), 0, 1, -fChip1*0.0001/2., kTRUE);
- }
- }
- }
- }
+ strEntryName3 += strHalfStave;
+ strEntryName3 += cHS;
+
+ if(!gGeoManager->SetAlignableEntry(strEntryName3.Data(),
+ halfStave.Data()))
+ AliFatal(Form("New lay 2: Unable to set alignable entry 3! %s::%s",
+ strEntryName3.Data(),halfStave.Data()));
+
+ for(Int_t cLad=0; cLad<2; cLad++) {
+
+ modUID = AliGeomManager::LayerToVolUID(layerId,modnum++);
+ module = halfStave;
+ module += str2;
+ module += cLad+cHS*2 +1;
+ strEntryName4 = strEntryName3;
+ strEntryName4 += strLadder;
+ strEntryName4 += cLad+cHS*2;
+ if(!gGeoManager->SetAlignableEntry(strEntryName4.Data(),module.Data(),modUID))
+ AliFatal(Form("New lay 2: Unable to set alignable entry 4! %s::%s",
+ strEntryName4.Data(),module.Data()));
+
+ SetT2Lmatrix(modUID, -0.0081, kFALSE);
+ } // end for cLad
+ } // end for cHS
+ } // end for cStave
+ } // cSect
+
+ } else { // else old SPD geometry
- //===== SPD layer2 =====
- {
TString str0 = "ALIC_1/ITSV_1/ITSD_1/IT12_1/I12B_";
- TString str1 = "/I20B_";
- TString str2 = "/I1D7_";
+ TString str1 = "/I10B_";
+ TString str1Bis = "/L1H-STAVE";
+ TString str1Tierce = "_1";
+ TString str2 = "/I107_";
TString sector;
TString stave;
+ TString halfStave;
TString module;
- for(Int_t c1 = 1; c1<=10; c1++){
+ layerId = AliGeomManager::kSPD1;
+ modnum = 0;
+
+ for(Int_t cSect = 0; cSect<10; cSect++) {
sector = str0;
- sector += c1; // this is one full sector
+ sector += cSect+1; // this is one full sector
strEntryName1 = strSPD;
- strEntryName1 += 1;
+ strEntryName1 += 0;
strEntryName1 += strSector;
- strEntryName1 += (c1-1);
+ strEntryName1 += cSect;
if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),sector.Data()))
- AliFatal("Unable to set alignable entry!!");
- //printf("%s == %s\n",strEntryName1.Data(),sector.Data());
-
- for(Int_t c2 =1; c2<=4; c2++){
+ AliFatal(Form("Old lay1: Unable to set alignable entry 1! %s::%s",
+ strEntryName1.Data(),sector.Data()));
+
+ for(Int_t cStave = 0; cStave<2; cStave++) {
+
+ stave = sector;
+ stave += str1;
+ stave += cStave+1;
+ strEntryName2 = strEntryName1;
+ strEntryName2 += strStave;
+ strEntryName2 += cStave;
+ // this is a stave
+ //printf("%s == %s\n",strEntryName2.Data(),stave.Data());
+
+ for(Int_t cHS=0; cHS<2; cHS++) {
+
+ halfStave = stave;
+ halfStave += str1Bis;
+ halfStave += cHS;
+ halfStave += str1Tierce;
+ strEntryName3 = strEntryName2;
+ strEntryName3 += strHalfStave;
+ strEntryName3 += cHS;
+ // this is a half-stave
+ //printf("%s == %s\n",strEntryName3.Data(),halfStave.Data());
+ if(!gGeoManager->SetAlignableEntry(strEntryName3.Data(),
+ halfStave.Data()))
+ AliFatal(Form("Old lay 1: Unable to set alignable entry 3! %s::%s",
+ strEntryName3.Data(),halfStave.Data()));
+
+ for(Int_t cLadder = 0; cLadder<2; cLadder++) {
+
+ modUID = AliGeomManager::LayerToVolUID(layerId,modnum++);
+ module = halfStave;
+ module += str2;
+ module += cLadder+cHS*2+1;
+ strEntryName4 = strEntryName3;
+ strEntryName4 += strLadder;
+ strEntryName4 += cLadder+cHS*2;
+ //printf("%s == %s\n",strEntryName4.Data(),module.Data());
+ if(!gGeoManager->SetAlignableEntry(strEntryName4.Data(),module.Data(),modUID))
+ AliFatal(Form("Old lay 1: Unable to set alignable entry 4! %s::%s",
+ strEntryName4.Data(),module.Data()));
+
+ SetT2Lmatrix(modUID, -fChip1*0.0001/2., kTRUE);
+ } // end for cLadder
+ } // end for cHS
+ } // end for cStave
+ } // end for cSect
+
+ layerId = AliGeomManager::kSPD2;
+ modnum = 0;
+
+ str1Bis = "/L2H-STAVE";
+ str1 = "/I20B_";
+ str2 = "/I1D7_";
+
+ for(Int_t cSect = 0; cSect<10; cSect++) {
+
+ sector = str0;
+ sector += cSect+1; // this is one full sector
+ strEntryName1 = strSPD;
+ strEntryName1 += 1;
+ strEntryName1 += strSector;
+ strEntryName1 += cSect;
+ //if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),sector.Data()))
+ // AliFatal(Form("Unable to set alignable entry!!");
+ // we don't need the previous lines because the whole sector is
+ // already define with first layer ...
+
+ for(Int_t cStave =0; cStave<4; cStave++) {
stave = sector;
stave += str1;
- stave += c2;
+ stave += cStave+1;
strEntryName2 = strEntryName1;
strEntryName2 += strStave;
- strEntryName2 += (c2-1);
- if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),stave.Data()))
- AliFatal("Unable to set alignable entry!!");
- //printf("%s == %s\n",strEntryName2.Data(),stave.Data()); // this is a stave
+ strEntryName2 += cStave;
- for(Int_t c3 =1; c3<=4; c3++){
-
- module = stave;
- module += str2;
- module += c3;
+ for(Int_t cHS=0; cHS<2; cHS++) {
+
+ halfStave = stave;
+ halfStave += str1Bis;
+ halfStave += cHS;
+ halfStave += str1Tierce;
strEntryName3 = strEntryName2;
- strEntryName3 += strLadder;
- strEntryName3 += (c3-1);
- if(!gGeoManager->SetAlignableEntry(strEntryName3.Data(),module.Data()))
- AliFatal("Unable to set alignable entry!!");
- //printf("%s == %s\n",strEntryName3.Data(),module.Data());
-
- SetT2Lmatrix(strEntryName3.Data(), TMath::Pi(), -1, -fChip2*0.0001/2., kFALSE);
- }
- }
- }
- }
+ strEntryName3 += strHalfStave;
+ strEntryName3 += cHS;
+ // this is a half-stave
+ //printf("%s == %s\n",strEntryName3.Data(),halfStave.Data());
+ if(!gGeoManager->SetAlignableEntry(strEntryName3.Data(),
+ halfStave.Data()))
+ AliFatal(Form("Old lay 2: Unable to set alignable entry 3! %s::%s",
+ strEntryName3.Data(),halfStave.Data()));
+
+ for(Int_t cLad =0; cLad<2; cLad++) {
+
+ modUID = AliGeomManager::LayerToVolUID(layerId,modnum++);
+ module = halfStave;
+ module += str2;
+ module += cLad+cHS*2+1;
+ strEntryName4 = strEntryName3;
+ strEntryName4 += strLadder;
+ strEntryName4 += cLad+cHS*2;
+ //printf("%s == %s\n",strEntryName4.Data(),module.Data());
+ if(!gGeoManager->SetAlignableEntry(strEntryName4.Data(),module.Data(),modUID))
+ AliFatal(Form("Old lay2: Unable to set alignable entry 4! %s::%s",
+ strEntryName4.Data(),module.Data()));
+
+ SetT2Lmatrix(modUID, -fChip2*0.0001/2., kFALSE);
+ } // end for cLad
+ } // end for cHS
+ } // end for cStave
+ } // end for cSect
+ } // end if AliITSInitGeometry::SPSIsTGeoNative().
//===== SDD layers =====
-
if (AliITSInitGeometry::SDDIsTGeoNative()) { // new SDD geometry
+ layerId = AliGeomManager::kSDD1;
+ modnum = 0;
TString str0 = "/ALIC_1/ITSV_1/ITSsddLayer3_1/ITSsddLadd_"; // SDD layer1
TString str1 = "/ITSsddSensor3_";
- TString str2 = "/ITSsddWafer3_1";
TString ladder;
- TString wafer;
+ TString sensor;
for(Int_t c1 = 0; c1<14; c1++) {
strEntryName1 += c1;
//printf("%s == %s\n",strEntryName1.Data(),ladder.Data());
if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),ladder.Data()))
- AliFatal("Unable to set alignable entry!!");
+ AliFatal(Form("Unable to set alignable entry 1! %s :: %s",
+ strEntryName1.Data(),ladder.Data()));
for(Int_t c2 =0; c2<6; c2++) {
- wafer = ladder;
- wafer += str1;
- wafer += c2;
- wafer += str2; // one wafer
+ modUID = AliGeomManager::LayerToVolUID(layerId,modnum++);
+ sensor = ladder;
+ sensor += str1;
+ sensor += c2;
strEntryName2 = strEntryName1;
strEntryName2 += strSensor;
strEntryName2 += c2;
//printf("%s == %s\n",strEntryName2.Data(),wafer.Data());
- if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),wafer.Data()))
- AliFatal("Unable to set alignable entry!!");
-
- SetT2Lmatrix(strEntryName2.Data(), TMath::Pi(), -1, 0, kFALSE, c2>=3);
+ if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),sensor.Data(),modUID))
+ AliFatal(Form("Unable to set alignable entry 2! %s :: %s",
+ strEntryName2.Data(),sensor.Data()));
+
+ if(c1 != 2) {
+ SetT2Lmatrix(modUID, 0, kFALSE, c2>=3);
+ } else {// for ladder 2, mounted with a pi rot around y
+ SetT2Lmatrix(modUID, 0, kFALSE, c2<3);
+ }
}
}
+ layerId = AliGeomManager::kSDD2;
+ modnum = 0;
str0 = "/ALIC_1/ITSV_1/ITSsddLayer4_1/ITSsddLadd_"; // SDD layer2
str1 = "/ITSsddSensor4_";
- str2 = "/ITSsddWafer4_1";
for(Int_t c1 = 0; c1<22; c1++) {
strEntryName1 += c1;
//printf("%s == %s\n",strEntryName1.Data(),ladder.Data());
if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),ladder.Data()))
- AliFatal("Unable to set alignable entry!!");
+ AliFatal(Form("Unable to set alignable entry 1! %s :: %s",
+ strEntryName1.Data(),ladder.Data()));
for(Int_t c2 =0; c2<8; c2++) {
- wafer = ladder;
- wafer += str1;
- wafer += c2;
- wafer += str2; // one wafer
+ modUID = AliGeomManager::LayerToVolUID(layerId,modnum++);
+ sensor = ladder;
+ sensor += str1;
+ sensor += c2;
strEntryName2 = strEntryName1;
strEntryName2 += strSensor;
strEntryName2 += c2;
//printf("%s == %s\n",strEntryName2.Data(),wafer.Data());
- if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),wafer.Data()))
- AliFatal("Unable to set alignable entry!!");
+ if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),sensor.Data(),modUID))
+ AliFatal(Form("Unable to set alignable entry 2! %s :: %s",
+ strEntryName2.Data(),sensor.Data()));
- SetT2Lmatrix(strEntryName2.Data(), TMath::Pi(), -1, 0, kFALSE, c2>=4);
+ SetT2Lmatrix(modUID, 0, kFALSE, c2>=4);
}
}
- } else { // else old geometry
+ } else { // else old SDD geometry
+ layerId = AliGeomManager::kSDD1;
+ modnum = 0;
+
TString str0 = "ALIC_1/ITSV_1/ITSD_1/IT34_1/I004_";
TString str1 = "/I302_";
strEntryName1 +=strLadder;
strEntryName1 += (c1-1);
if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),ladder.Data()))
- AliFatal("Unable to set alignable entry!!");
- //printf("%s == %s\n",strEntryName1.Data(),ladder.Data());
+ AliFatal(Form("Unable to set alignable entry 1! %s :: %s",
+ strEntryName1.Data(),ladder.Data()));
for(Int_t c2 =1; c2<=6; c2++){
+ modUID = AliGeomManager::LayerToVolUID(layerId,modnum++);
wafer = ladder;
wafer += str1;
wafer += c2; // one wafer
strEntryName2 = strEntryName1;
strEntryName2 += strSensor;
strEntryName2 += (c2-1);
- if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),wafer.Data()))
- AliFatal("Unable to set alignable entry!!");
- //printf("%s == %s\n",strEntryName2.Data(),wafer.Data());
+ if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),wafer.Data(),modUID))
+ AliFatal(Form("Unable to set alignable entry 2! %s :: %s",
+ strEntryName2.Data(),wafer.Data()));
- SetT2Lmatrix(strEntryName2.Data(), TMath::Pi(), -1, 0, kFALSE);
+ SetT2Lmatrix(modUID, 0, kFALSE);
}
}
+ layerId = AliGeomManager::kSDD2;
+ modnum = 0;
str0 = "ALIC_1/ITSV_1/ITSD_1/IT34_1/I005_";
str1 = "/I402_";
strEntryName1 +=strLadder;
strEntryName1 += (c1-1);
if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),ladder.Data()))
- AliFatal("Unable to set alignable entry!!");
- //printf("%s == %s\n",strEntryName1.Data(),ladder.Data());
+ AliFatal(Form("Unable to set alignable entry 1! %s :: %s",
+ strEntryName1.Data(),ladder.Data()));
for(Int_t c2 =1; c2<=8; c2++){
+ modUID = AliGeomManager::LayerToVolUID(layerId,modnum++);
wafer = ladder;
wafer += str1;
wafer += c2; // one wafer
strEntryName2 = strEntryName1;
strEntryName2 += strSensor;
strEntryName2 += (c2-1);
- if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),wafer.Data()))
- AliFatal("Unable to set alignable entry!!");
+ if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),wafer.Data(),modUID))
+ AliFatal(Form("Unable to set alignable entry 2! %s,%s",
+ strEntryName2.Data(),wafer.Data()));
+
+ SetT2Lmatrix(modUID, 0, kFALSE);
+ }
+ }
+ } // end SDD
+
+ //===== SSD layers =====
+ if (AliITSInitGeometry::SSDIsTGeoNative()) { // new SSD geometry
+
+ layerId = AliGeomManager::kSSD1;
+ modnum = 0;
+ TString str0 = "/ALIC_1/ITSV_1/ITSssdLayer5_1/ITSssdLay5Ladd_";//SSD layer1
+ TString str1 = "/ITSssdSensor5_";
+ TString str2 = "";
+ TString ladder;
+ TString wafer;
+
+ for(Int_t c1 = 0; c1<34; c1++) {
+
+ ladder = str0;
+ ladder += c1; // the set of wafers from one ladder
+ strEntryName1 = strSSD;
+ strEntryName1 += 4;
+ strEntryName1 += strLadder;
+ strEntryName1 += c1;
+ //printf("%s == %s\n",strEntryName1.Data(),ladder.Data());
+ if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),ladder.Data()))
+ AliFatal(Form("Unable to set alignable entry 1! %s :: %s",
+ strEntryName1.Data(),ladder.Data()));
+
+ for(Int_t c2 =0; c2<22; c2++) {
+
+ modUID = AliGeomManager::LayerToVolUID(layerId,modnum++);
+ wafer = ladder;
+ wafer += str1;
+ wafer += c2;
+ //wafer += str2; // one wafer
+ strEntryName2 = strEntryName1;
+ strEntryName2 += strSensor;
+ strEntryName2 += c2;
//printf("%s == %s\n",strEntryName2.Data(),wafer.Data());
+ if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),wafer.Data(),modUID))
+ AliFatal(Form("Unable to set alignable entry 2! %s :: %s",
+ strEntryName2.Data(),wafer.Data()));
- SetT2Lmatrix(strEntryName2.Data(), TMath::Pi(), -1, 0, kFALSE);
+ SetT2Lmatrix(modUID, 0, kFALSE, kFALSE);
}
}
- } // end SDD
+ layerId = AliGeomManager::kSSD2;
+ modnum = 0;
+ str0 = "/ALIC_1/ITSV_1/ITSssdLayer6_1/ITSssdLay6Ladd_"; // SSD layer2
+ str1 = "/ITSssdSensor6_";
+ str2 = "";
+
+ for(Int_t c1 = 0; c1<38; c1++) {
+
+ ladder = str0;
+ ladder += c1; // the set of wafers from one ladder
+ strEntryName1 = strSSD;
+ strEntryName1 += 5;
+ strEntryName1 += strLadder;
+ strEntryName1 += c1;
+ //printf("%s == %s\n",strEntryName1.Data(),ladder.Data());
+ if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),ladder.Data()))
+ AliFatal(Form("Unable to set alignable entry 1! %s :: %s",
+ strEntryName1.Data(),ladder.Data()));
+ for(Int_t c2 =0; c2<25; c2++) {
- //===== SSD layer1 =====
- {
+ modUID = AliGeomManager::LayerToVolUID(layerId,modnum++);
+ wafer = ladder;
+ wafer += str1;
+ wafer += c2;
+ //wafer += str2; // one wafer
+ strEntryName2 = strEntryName1;
+ strEntryName2 += strSensor;
+ strEntryName2 += c2;
+ //printf("%s == %s\n",strEntryName2.Data(),wafer.Data());
+ if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),wafer.Data(),modUID))
+ AliFatal(Form("Unable to set alignable entry 2! %s :: %s",
+ strEntryName2.Data(),wafer.Data()));
+
+ SetT2Lmatrix(modUID, 0, kFALSE, kFALSE);
+ }
+ }
+
+ } else { // else old SSD geometry
+
+ layerId = AliGeomManager::kSSD1;
+ modnum = 0;
TString str0 = "ALIC_1/ITSV_1/ITSD_1/IT56_1/I565_";
TString str1 = "/I562_";
-
TString ladder;
TString wafer;
for(Int_t c1 = 1; c1<=34; c1++){
-
+
ladder = str0;
ladder += c1; // the set of wafers from one ladder
strEntryName1 = strSSD;
strEntryName1 +=strLadder;
strEntryName1 += (c1-1);
if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),ladder.Data()))
- AliFatal("Unable to set alignable entry!!");
- //printf("%s == %s\n",strEntryName1.Data(),ladder.Data());
+ AliFatal(Form("Unable to set alignable entry 1! %s :: %s",
+ strEntryName1.Data(),ladder.Data()));
for(Int_t c2 = 1; c2<=22; c2++){
-
+
+ modUID = AliGeomManager::LayerToVolUID(layerId,modnum++);
wafer = ladder;
wafer += str1;
wafer += c2; // one wafer
strEntryName2 = strEntryName1;
strEntryName2 += strSensor;
strEntryName2 += (c2-1);
- if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),wafer.Data()))
- AliFatal("Unable to set alignable entry!!");
- //printf("%s == %s\n",strEntryName2.Data(),wafer.Data());
+ if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),wafer.Data(),modUID))
+ AliFatal(Form("Unable to set alignable entry 2! %s :: %s",
+ strEntryName2.Data(),wafer.Data()));
- SetT2Lmatrix(strEntryName2.Data(), TMath::Pi(), -1, 0, kFALSE);
+ SetT2Lmatrix(modUID, 0, kFALSE);
}
}
- }
-
- //===== SSD layer2 =====
- {
- TString str0 = "ALIC_1/ITSV_1/ITSD_1/IT56_1/I569_";
- TString str1 = "/I566_";
-
- TString ladder;
- TString wafer;
-
+
+ layerId = AliGeomManager::kSSD2;
+ modnum = 0;
+ str0 = "ALIC_1/ITSV_1/ITSD_1/IT56_1/I569_";
+ str1 = "/I566_";
+
for(Int_t c1 = 1; c1<=38; c1++){
-
+
ladder = str0;
ladder += c1; // the set of wafers from one ladder
strEntryName1 = strSSD;
strEntryName1 +=strLadder;
strEntryName1 += (c1-1);
if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),ladder.Data()))
- AliFatal("Unable to set alignable entry!!");
- //printf("%s == %s\n",strEntryName1.Data(),ladder.Data());
+ AliFatal(Form("Unable to set alignable entry 1! %s :: %s",
+ strEntryName1.Data(),ladder.Data()));
for(Int_t c2 = 1; c2<=25; c2++){
-
+
+ modUID = AliGeomManager::LayerToVolUID(layerId,modnum++);
wafer = ladder;
wafer += str1;
wafer += c2; // one wafer
strEntryName2 = strEntryName1;
strEntryName2 += strSensor;
strEntryName2 += (c2-1);
- if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),wafer.Data()))
- AliFatal("Unable to set alignable entry!!");
- //printf("%s == %s\n",strEntryName2.Data(),wafer.Data());
+ if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),wafer.Data(),modUID))
+ AliFatal(Form("Unable to set alignable entry 2! %s :: %s",
+ strEntryName2.Data(),wafer.Data()));
- SetT2Lmatrix(strEntryName2.Data(), TMath::Pi(), -1, 0, kFALSE);
+ SetT2Lmatrix(modUID, 0, kFALSE);
}
}
- }
-}
-//______________________________________________________________________
-void AliITSv11Hybrid::BuildGeometry(){
- // Geometry builder for the ITS version 10. Event Display geometry.
- // Inputs:
- // none.
- // Outputs:
- // none.
- // Return:
- // none.
-
- TNode *node, *top;
-
- const Int_t kColorITS=kYellow;
- //
- top = gAlice->GetGeometry()->GetNode("alice");
-
-
- new TTUBE("S_layer1","Layer1 of ITS","void",
- 3.8095,3.8095+1.03*9.36/100.,14.35);
- top->cd();
- node = new TNode("Layer1","Layer1","S_layer1",0,0,0,"");
- node->SetLineColor(kColorITS);
- fNodes->Add(node);
-
- new TTUBE("S_layer2","Layer2 of ITS","void",7.,7.+1.03*9.36/100.,14.35);
- top->cd();
- node = new TNode("Layer2","Layer2","S_layer2",0,0,0,"");
- node->SetLineColor(kColorITS);
- fNodes->Add(node);
-
- new TTUBE("S_layer3","Layer3 of ITS","void",15.,15.+0.94*9.36/100.,25.1);
- top->cd();
- node = new TNode("Layer3","Layer3","S_layer3",0,0,0,"");
- node->SetLineColor(kColorITS);
- fNodes->Add(node);
-
- new TTUBE("S_layer4","Layer4 of ITS","void",24.1,24.1+0.95*9.36/100.,32.1);
- top->cd();
- node = new TNode("Layer4","Layer4","S_layer4",0,0,0,"");
- node->SetLineColor(kColorITS);
- fNodes->Add(node);
-
- new TTUBE("S_layer5","Layer5 of ITS","void",
- 38.5,38.5+0.91*9.36/100.,49.405);
- top->cd();
- node = new TNode("Layer5","Layer5","S_layer5",0,0,0,"");
- node->SetLineColor(kColorITS);
- fNodes->Add(node);
-
- new TTUBE("S_layer6","Layer6 of ITS","void",
- 43.5765,43.5765+0.87*9.36/100.,55.27);
- top->cd();
- node = new TNode("Layer6","Layer6","S_layer6",0,0,0,"");
- node->SetLineColor(kColorITS);
- fNodes->Add(node);
+ } // end SSD geometry
}
//______________________________________________________________________
TGeoManager *geoManager = gGeoManager;
CreateOldGeometry();
- TGeoVolume *vITS = geoManager->GetVolume("ITSV");
+
+ TGeoVolume *vITS = geoManager->GetVolume("ITSV");
+
const Char_t *cvsDate="$Date$";
const Char_t *cvsRevision="$Revision$";
- const Int_t length=100;
- Char_t vstrng[length];
- if(fInitGeom.WriteVersionString(vstrng,length,(AliITSVersion_t)IsVersion(),
+ const Int_t kLength=100;
+ Char_t vstrng[kLength];
+ if(fInitGeom.WriteVersionString(vstrng,kLength,(AliITSVersion_t)IsVersion(),
fMinorVersion,cvsDate,cvsRevision))
vITS->SetTitle(vstrng);
+ if (AliITSInitGeometry::SPDIsTGeoNative()) {
+ fSPDgeom->SPDSector(vITS);
+ }
+
if (AliITSInitGeometry::SDDIsTGeoNative()) {
fSDDgeom->Layer3(vITS);
fSDDgeom->Layer4(vITS);
+ fSDDgeom->ForwardLayer3(vITS);
+ fSDDgeom->ForwardLayer4(vITS);
+ }
+
+ if (AliITSInitGeometry::SSDIsTGeoNative()) {
+ fSSDgeom->Layer5(vITS);
+ fSSDgeom->Layer6(vITS);
+ fSSDgeom->LadderSupportLayer5(vITS);
+ fSSDgeom->LadderSupportLayer6(vITS);
+ fSSDgeom->EndCapSupportSystemLayer6(vITS);
+ fSSDgeom->EndCapSupportSystemLayer5(vITS);
+ }
+
+ if (AliITSInitGeometry::SPDshieldIsTGeoNative())
+ fSupgeom->SPDCone(vITS);
+
+ if (AliITSInitGeometry::SDDconeIsTGeoNative())
+ fSupgeom->SDDCone(vITS);
+
+ if (AliITSInitGeometry::SSDconeIsTGeoNative())
+ fSupgeom->SSDCone(vITS);
+
+ if (AliITSInitGeometry::ServicesAreTGeoNative()) {
+ fSDDgeom->SDDCables(vITS);
+ fSSDgeom->SSDCables(vITS);
}
}
//End_Html
//INNER RADII OF THE SILICON LAYERS
// Float_t rl[6] = { 3.8095,7.,15.,24.,38.1,43.5765 };
- //THICKNESSES OF LAYERS (in % radiation length)
+ //THICKNESSES OF LAYERS (in % radiation kLength)
Float_t drl[6] = { 1.03,1.03,0.94,0.95,0.91,0.87 };
//HALF LENGTHS OF LAYERS
// Float_t dzl[6] = { 14.35,14.35,25.1,32.1,49.405,55.27 };
dgh[48] = ztpc+4.+0.1;
dgh[49] = 62.0;//62.4;
dgh[50] = 85.;
- gMC->Gsvolu("ITSV", "PCON", idtmed[205], dgh, 51);
+// gMC->Gsvolu("ITSV", "PCON", idtmed[205], dgh, 51);
+ new TGeoVolumeAssembly("ITSV");
// --- Place the ghost volume in its mother volume (ALIC) and make it
// invisible
//======================================================================
//TGeoVolumeAssembly *dITS = new TGeoVolumeAssembly("ITSD");
+ if (! AliITSInitGeometry::SPDshieldIsTGeoNative() ||
+ ! AliITSInitGeometry::SPDIsTGeoNative() ||
+ ! AliITSInitGeometry::SDDIsTGeoNative() ||
+ ! AliITSInitGeometry::SSDIsTGeoNative() ||
+ ! AliITSInitGeometry::SDDconeIsTGeoNative() ||
+ ! AliITSInitGeometry::SSDconeIsTGeoNative() ) {
new TGeoVolumeAssembly("ITSD");
gMC->Gspos("ITSD", 1, "ITSV", 0., 0., 0., idrotm[199], "ONLY");
-
+ }
// --- Define SPD (option 'b') volumes ----------------------------
// --- Define SDD volumes ------------------------------------------
-
cos30 = cos(30.*3.14159/180.);
sin30 = sin(30.*3.14159/180.);
dits[2] = 39.4;
gMC->Gsvolu("ICY1", "TUBE", idtmed[208], dits, 3);
- // --- Define volume of second cylinder between SDD and SSD --------------
- dits[0] = (59.5-0.128)/2.;
+ // --- Define volumes of second cylinder between SDD and SSD ------------
+ // --- (from B. Giraudo plots - M.S. 20 Nov 2007)
+ dits[0] = 59.5/2. - 0.06;
dits[1] = 59.5/2.;
- dits[2] = 56.2; // was 57
+ dits[2] = 102/2.; // was 57
gMC->Gsvolu("ICY2", "TUBE", idtmed[208], dits, 3);
+ dits[1] = dits[0];
+ dits[0] = dits[1] - 0.5;
+ gMC->Gsvolu("ICY3", "TUBE", idtmed[267], dits, 3);
+
+ dits[1] = dits[0];
+ dits[0] = dits[1] - 0.06;
+ gMC->Gsvolu("ICY4", "TUBE", idtmed[208], dits, 3);
+
// --- Define volumes of SDD cone ----------------------------------
dits[0] = 0;
dits[1] = 360;
dits[2] = 12;
+ //
dits[3] = -59.7;
dits[4] = 27;
dits[5] = 28.6;
+
dits[6] = -42.7;
dits[7] = 10;
dits[8] = 28.6;
- dits[9] = -34.65;
+
+ // dits[9] = -34.65;
+ dits[9] = -33.55;
dits[10] = 10;
dits[11] = 28.6;
- dits[12] = -34.65;
+
+ // dits[12] = -34.65;
+ dits[12] = -33.55;
dits[13] = 10;
dits[14] = 23.495;
- dits[15] = -23.7;
+
+ //dits[15] = -23.7;
+ dits[15] = -26.2;
dits[16] = 10;
dits[17] = 23.495;
- dits[18] = -23.7;
+
+ //dits[18] = -23.7;
+ dits[18] = -26.2;
dits[19] = 10;
dits[20] = 14.595;
- dits[21] = 23.7;
+
+ //dits[21] = 23.7;
+ dits[21] = 26.2;
dits[22] = 10;
dits[23] = 14.595;
- dits[24] = 23.7;
+
+ //dits[24] = 23.7;
+ dits[24] = 26.2;
dits[25] = 10;
dits[26] = 23.495;
- dits[27] = 34.65;
+
+// dits[27] = 34.65;
+ dits[27] = 33.55;
dits[28] = 10;
dits[29] = 23.495;
- dits[30] = 34.65;
+
+// dits[30] = 34.65;
+ dits[30] = 33.55;
dits[31] = 10;
dits[32] = 28.6;
+
dits[33] = 42.7;
dits[34] = 10;
dits[35] = 28.6;
+
dits[36] = 59.7;
dits[37] = 27.2637;
- dits[38] = 28.6;
+ dits[38] = 28.6;
+
+ if (! AliITSInitGeometry::SDDIsTGeoNative()) {
+ dits[9] = -34.65;
+ dits[12] = -34.65;
+ dits[15] = -23.7;
+ dits[18] = -23.7;
+ dits[21] = 23.7;
+ dits[24] = 23.7;
+ dits[27] = 34.65;
+ dits[30] = 34.65;
+ }
gMC->Gsvolu("IS02", "PCON", idtmed[204], dits, 39);
dits[0] = 0;
dits[2] = 7.74;
gMC->Gsvolu("I202", "BOX ", idtmed[272], dits, 3);
- dits[0] = 1;
+ if (AliITSInitGeometry::SDDIsTGeoNative())
+ dits[0] = 0.9;
+ else
+ dits[0] = 1;
dits[1] = 1;
dits[2] = 9.14;
gMC->Gsvolu("I203", "BOX ", idtmed[272], dits, 3);
dits[0] = 0;
dits[1] = 360;
dits[2] = 12;
+
dits[3] = -zmax;
- dits[4] = 46;
- dits[5] = 49.25;
+ dits[4] = 46;
+ dits[5] = 49.25;
+
dits[6] = -61.2;
dits[7] = 28.7;
- dits[8] = 49.25;
+ dits[8] = 49.25;
+
dits[9] = -57.5;
dits[10] = 28.7;
- dits[11] = 49.25;
+ dits[11] = 49.25;
+
dits[12] = -57.5;
dits[13] = 28.7;
dits[14] = 43.5;
- dits[15] = -49.2;
+
+ //dits[15] = -49.2;
+ dits[15] = -53.4-0.75;
dits[16] = 28.7;
dits[17] = 43.5;
- dits[18] = -49.2;
+
+ //dits[18] = -49.2;
+ dits[18] = -53.4-0.75;
dits[19] = 28.7;
dits[20] = 36.85;
- dits[21] = 50.6;
+
+ //dits[21] = 50.6;
+ dits[21] = 53.4+0.75;
dits[22] = 28.7;
dits[23] = 36.85;
- dits[24] = 50.6;
+
+ dits[24] = 53.4+0.75;
+ //dits[24] = 50.6;
dits[25] = 28.7;
dits[26] = 43.5;
+
dits[27] = 57.5;
dits[28] = 28.7;
dits[29] = 43.5;
+
dits[30] = 57.5;
dits[31] = 28.7;
- dits[32] = 49.25;
+ dits[32] = 49.25;
+
dits[33] = 61.2;
dits[34] = 28.7;
dits[35] = 49.25;
dits[36] = zmax;
dits[37] = 46;
- dits[38] = 49.25;
+ dits[38] = 49.25;
+
+ if (! AliITSInitGeometry::SSDIsTGeoNative()) {
+ dits[15] = -49.2;
+ dits[18] = -49.2;
+ dits[21] = 50.6;
+ dits[24] = 50.6;
+ }
+
gMC->Gsvolu("IS01", "PCON", idtmed[204], dits, 39); // SSD cone mother volume
dits[0] = 0;
//if (option == 2) {
if (! AliITSInitGeometry::SPDIsTGeoNative()) {
- gMC->Gspos("I12B",1,"IT12",0.0,0.0,0.0,0,"MANY");
- gMC->Gspos("I12B",8,"IT12",0.0,0.0,0.0,idrotm[233],"MANY");
- gMC->Gspos("I12B",7,"IT12",0.0,0.0,0.0,idrotm[244],"MANY");
- gMC->Gspos("I12B",6,"IT12",0.0,0.0,0.0,idrotm[236],"MANY");
- gMC->Gspos("I12B",2,"IT12",0.0,0.0,0.0,idrotm[245],"MANY");
- gMC->Gspos("I12B",3,"IT12",0.0,0.0,0.0,idrotm[234],"MANY");
- gMC->Gspos("I12B",4,"IT12",0.0,0.0,0.0,idrotm[246],"MANY");
- gMC->Gspos("I12B",5,"IT12",0.0,0.0,0.0,idrotm[247],"MANY");
- gMC->Gspos("I12B",9,"IT12",0.0,0.0,0.0,idrotm[248],"MANY");
- gMC->Gspos("I12B",10,"IT12",0.0,0.0,0.0,idrotm[249],"MANY");
+ gMC->Gspos("I12B",1,"IT12",0.0,0.0,0.0,0,"ONLY");
+ gMC->Gspos("I12B",8,"IT12",0.0,0.0,0.0,idrotm[233],"ONLY");
+ gMC->Gspos("I12B",7,"IT12",0.0,0.0,0.0,idrotm[244],"ONLY");
+ gMC->Gspos("I12B",6,"IT12",0.0,0.0,0.0,idrotm[236],"ONLY");
+ gMC->Gspos("I12B",2,"IT12",0.0,0.0,0.0,idrotm[245],"ONLY");
+ gMC->Gspos("I12B",3,"IT12",0.0,0.0,0.0,idrotm[234],"ONLY");
+ gMC->Gspos("I12B",4,"IT12",0.0,0.0,0.0,idrotm[246],"ONLY");
+ gMC->Gspos("I12B",5,"IT12",0.0,0.0,0.0,idrotm[247],"ONLY");
+ gMC->Gspos("I12B",9,"IT12",0.0,0.0,0.0,idrotm[248],"ONLY");
+ gMC->Gspos("I12B",10,"IT12",0.0,0.0,0.0,idrotm[249],"ONLY");
deltax=((ddet1-0.01/2.)+(dchip1-0.015/2.))*TMath::Cos(270.*TMath::Pi()/180.); // see definition of idrotm[238]
deltay=((ddet1-0.01/2.)+(dchip1-0.015/2.))*TMath::Sin(270.*TMath::Pi()/180.); // see definition of idrotm[238]
gMC->Gspos("I10B",2,"I12B",0.203+deltax,3.8206+deltay,0.0,idrotm[238],"ONLY");
gMC->Gspos("I124",1,"I12B",-0.4965,6.8742,0.0,idrotm[215],"ONLY");
gMC->Gspos("I105",3,"I10B",-0.05,-0.01,-16.844,idrotm[201],"ONLY");
gMC->Gspos("I105",4,"I10B",-0.05,-0.01,16.844,0,"ONLY");
- gMC->Gspos("I107",2,"I10B",-0.0455,-di10b[1]+di107[1],3.536,0,"ONLY");
- gMC->Gspos("I107",1,"I10B",-0.0455,-di10b[1]+di107[1],10.708,0,"ONLY");
- gMC->Gspos("I107",4,"I10B",-0.0455,-di10b[1]+di107[1],-10.708,0,"ONLY");
- gMC->Gspos("I107",3,"I10B",-0.0455,-di10b[1]+di107[1],-3.536,0,"ONLY");
+
+ // Insertion of half-stave level in old SPD1
+ gGeoManager->MakeVolumeAssembly("L1H-STAVE0");
+ gGeoManager->MakeVolumeAssembly("L1H-STAVE1");
+ gMC->Gspos("L1H-STAVE0",1,"I10B",0,0,0,0,"ONLY");
+ gMC->Gspos("L1H-STAVE1",1,"I10B",0,0,0,0,"ONLY");
+ gMC->Gspos("I107",1,"L1H-STAVE0",-0.0455,-di10b[1]+di107[1],10.708,0,"ONLY");
+ gMC->Gspos("I107",2,"L1H-STAVE0",-0.0455,-di10b[1]+di107[1],3.536,0,"ONLY");
+ gMC->Gspos("I107",3,"L1H-STAVE1",-0.0455,-di10b[1]+di107[1],-3.536,0,"ONLY");
+ gMC->Gspos("I107",4,"L1H-STAVE1",-0.0455,-di10b[1]+di107[1],-10.708,0,"ONLY");
+ // gMC->Gspos("I107",2,"I10B",-0.0455,-di10b[1]+di107[1],3.536,0,"ONLY");
+ // gMC->Gspos("I107",1,"I10B",-0.0455,-di10b[1]+di107[1],10.708,0,"ONLY");
+ // gMC->Gspos("I107",4,"I10B",-0.0455,-di10b[1]+di107[1],-10.708,0,"ONLY");
+ // gMC->Gspos("I107",3,"I10B",-0.0455,-di10b[1]+di107[1],-3.536,0,"ONLY");
+
+ // Insertion of half-stave level in old SPD2
+ gGeoManager->MakeVolumeAssembly("L2H-STAVE0");
+ gGeoManager->MakeVolumeAssembly("L2H-STAVE1");
+ gMC->Gspos("L2H-STAVE0",1,"I20B",0,0,0,0,"ONLY");
+ gMC->Gspos("L2H-STAVE1",1,"I20B",0,0,0,0,"ONLY");
+ gMC->Gspos("I1D7",1,"L2H-STAVE0",-0.0455,-di20b[1]+di1d7[1],10.708,0,"ONLY");
+ gMC->Gspos("I1D7",2,"L2H-STAVE0",-0.0455,-di20b[1]+di1d7[1],3.536,0,"ONLY");
+ gMC->Gspos("I1D7",3,"L2H-STAVE1",-0.0455,-di20b[1]+di1d7[1],-3.536,0,"ONLY");
+ gMC->Gspos("I1D7",4,"L2H-STAVE1",-0.0455,-di20b[1]+di1d7[1],-10.708,0,"ONLY");
+// gMC->Gspos("I1D7",2,"I20B",-0.0455,-di20b[1]+di1d7[1],3.536,0,"ONLY");
+// gMC->Gspos("I1D7",1,"I20B",-0.0455,-di20b[1]+di1d7[1],10.708,0,"ONLY");
+// gMC->Gspos("I1D7",4,"I20B",-0.0455,-di20b[1]+di1d7[1],-10.708,0,"ONLY");
+// gMC->Gspos("I1D7",3,"I20B",-0.0455,-di20b[1]+di1d7[1],-3.536,0,"ONLY");
+
gMC->Gspos("I109",1,"I10B",-0.138,0.015,-16.844,idrotm[201],"ONLY");
gMC->Gspos("I109",2,"I10B",-0.138,0.015,16.844,0,"ONLY");
gMC->Gspos("I108",1,"I10B",-0.138,-di10b[1]+2.*di107[1]+di108[1],0.0,0,"ONLY");
gMC->Gspos("I105",1,"I20B",-0.05,-0.01,-16.844,idrotm[201],"ONLY");
gMC->Gspos("I105",2,"I20B",-0.05,-0.01,16.844,0,"ONLY");
- gMC->Gspos("I1D7",2,"I20B",-0.0455,-di20b[1]+di1d7[1],3.536,0,"ONLY");
- gMC->Gspos("I1D7",1,"I20B",-0.0455,-di20b[1]+di1d7[1],10.708,0,"ONLY");
- gMC->Gspos("I1D7",4,"I20B",-0.0455,-di20b[1]+di1d7[1],-10.708,0,"ONLY");
- gMC->Gspos("I1D7",3,"I20B",-0.0455,-di20b[1]+di1d7[1],-3.536,0,"ONLY");
gMC->Gspos("I109",3,"I20B",-0.138,0.015,-16.844,idrotm[201],"ONLY");
gMC->Gspos("I109",4,"I20B",-0.138,0.015,16.844,0,"ONLY");
gMC->Gspos("I108",2,"I20B",-0.138,-di20b[1]+2.*di1d7[1]+di108[1],0.0,0,"ONLY");
gMC->Gspos("ITS1",1,"I101",0.0,0.0,0.0,0,"ONLY");
gMC->Gspos("ITS2",1,"I1D1",0.0,0.0,0.0,0,"ONLY");
gMC->Gspos("I651",1,"IT12",0.0,0.0,26.05,0,"ONLY");
- gMC->Gspos("I651",2,"IT12",0.0,0.0,-26.05,0,"ONLY");
- gMC->Gspos("I650",16,"IT12",0.0,0.0,22.0,idrotm[1104],"MANY");
- gMC->Gspos("I650",20,"IT12",0.0,0.0,22.0,idrotm[1130],"MANY");
- gMC->Gspos("I650",18,"IT12",0.0,0.0,22.0,idrotm[1117],"MANY");
- gMC->Gspos("I650",1,"IT12",0.0,0.0,22.0,0,"MANY");
- gMC->Gspos("I650",4,"IT12",0.0,0.0,22.0,idrotm[1106],"MANY");
- gMC->Gspos("I650",6,"IT12",0.0,0.0,22.0,idrotm[1039],"MANY");
- gMC->Gspos("I650",8,"IT12",0.0,0.0,22.0,idrotm[1107],"MANY");
- gMC->Gspos("I650",10,"IT12",0.0,0.0,22.0,idrotm[1065],"MANY");
- gMC->Gspos("I650",12,"IT12",0.0,0.0,22.0,idrotm[1078],"MANY");
- gMC->Gspos("I650",14,"IT12",0.0,0.0,22.0,idrotm[1091],"MANY");
- gMC->Gspos("I650",19,"IT12",0.0,0.0,-22.0,idrotm[1108],"MANY");
- gMC->Gspos("I650",2,"IT12",0.0,0.0,-22.0,idrotm[1109],"MANY");
- gMC->Gspos("I650",3,"IT12",0.0,0.0,-22.0,idrotm[1110],"MANY");
- gMC->Gspos("I650",5,"IT12",0.0,0.0,-22.0,idrotm[1111],"MANY");
- gMC->Gspos("I650",7,"IT12",0.0,0.0,-22.0,idrotm[1112],"MANY");
- gMC->Gspos("I650",9,"IT12",0.0,0.0,-22.0,idrotm[1113],"MANY");
- gMC->Gspos("I650",11,"IT12",0.0,0.0,-22.0,idrotm[1114],"MANY");
- gMC->Gspos("I650",13,"IT12",0.0,0.0,-22.0,idrotm[1115],"MANY");
- gMC->Gspos("I650",15,"IT12",0.0,0.0,-22.0,idrotm[1116],"MANY");
- gMC->Gspos("I650",17,"IT12",0.0,0.0,-22.0,idrotm[1118],"MANY");
- gMC->Gspos("I666",1,"I650",0.0,0.0,0.25,idrotm[1003],"MANY");
+ gMC->Gspos("I651",2,"IT12",0.0,0.0,-26.05,0,"ONLY");
+
+ gMC->Gspos("I650",16,"IT12",0.0,0.0,22.0,idrotm[1104],"ONLY");
+ gMC->Gspos("I650",20,"IT12",0.0,0.0,22.0,idrotm[1130],"ONLY");
+ gMC->Gspos("I650",18,"IT12",0.0,0.0,22.0,idrotm[1117],"ONLY");
+ gMC->Gspos("I650",1,"IT12",0.0,0.0,22.0,0,"ONLY");
+ gMC->Gspos("I650",4,"IT12",0.0,0.0,22.0,idrotm[1106],"ONLY");
+ gMC->Gspos("I650",6,"IT12",0.0,0.0,22.0,idrotm[1039],"ONLY");
+ gMC->Gspos("I650",8,"IT12",0.0,0.0,22.0,idrotm[1107],"ONLY");
+ gMC->Gspos("I650",10,"IT12",0.0,0.0,22.0,idrotm[1065],"ONLY");
+ gMC->Gspos("I650",12,"IT12",0.0,0.0,22.0,idrotm[1078],"ONLY");
+ gMC->Gspos("I650",14,"IT12",0.0,0.0,22.0,idrotm[1091],"ONLY");
+ gMC->Gspos("I650",19,"IT12",0.0,0.0,-22.0,idrotm[1108],"ONLY");
+ gMC->Gspos("I650",2,"IT12",0.0,0.0,-22.0,idrotm[1109],"ONLY");
+ gMC->Gspos("I650",3,"IT12",0.0,0.0,-22.0,idrotm[1110],"ONLY");
+ gMC->Gspos("I650",5,"IT12",0.0,0.0,-22.0,idrotm[1111],"ONLY");
+ gMC->Gspos("I650",7,"IT12",0.0,0.0,-22.0,idrotm[1112],"ONLY");
+ gMC->Gspos("I650",9,"IT12",0.0,0.0,-22.0,idrotm[1113],"ONLY");
+ gMC->Gspos("I650",11,"IT12",0.0,0.0,-22.0,idrotm[1114],"ONLY");
+ gMC->Gspos("I650",13,"IT12",0.0,0.0,-22.0,idrotm[1115],"ONLY");
+ gMC->Gspos("I650",15,"IT12",0.0,0.0,-22.0,idrotm[1116],"ONLY");
+ gMC->Gspos("I650",17,"IT12",0.0,0.0,-22.0,idrotm[1118],"ONLY");
+ gMC->Gspos("I666",1,"I650",0.0,0.0,0.25,idrotm[1003],"ONLY");
+
gMC->Gspos("I667",1,"I650",0.1102,0.9945,0.45,idrotm[1088],"ONLY");
gMC->Gspos("I669",3,"I650",0.1883,4.0372,-3.2,0,"ONLY");
gMC->Gspos("I671",3,"I650",0.1883,4.0372,0.6,0,"ONLY");
gMC->Gspos("I672",1,"I671",0.0,0.0,0.0,0,"ONLY");
gMC->Gspos("I674",1,"I673",0.0,0.0,0.0,0,"MANY");
gMC->Gspos("I675",1,"I673",0.0,0.0,-0.5,0,"ONLY");
- gMC->Gspos("I677",1,"I676",0.0,0.0,0.0,0,"MANY");
+ gMC->Gspos("I677",1,"I676",0.0,0.0,0.0,0,"ONLY");
gMC->Gspos("I678",1,"I676",0.0,0.0,-0.95,0,"ONLY");
}
gMC->Gspos("I034", 3,"I018", -1.6, -1.775, 1.35, idrotm[348], "ONLY");
gMC->Gspos("I034", 4,"I018", 1.6, -1.775, -2.65, idrotm[312], "ONLY");
- gMC->Gspos("I035", 1,"I018", 1.7, -0.55, iI018dits[2]-iI035dits[2], 0, "MANY");
- gMC->Gspos("I035", 2,"I018", -1.7, -0.55, iI018dits[2]-iI035dits[2], 0, "MANY");
+ gMC->Gspos("I035", 1,"I018", 1.7, -0.55, iI018dits[2]-iI035dits[2], 0, "ONLY");
+ gMC->Gspos("I035", 2,"I018", -1.7, -0.55, iI018dits[2]-iI035dits[2], 0, "ONLY");
gMC->Gspos("I036", 1,"I018", 0.3087, 1.7191, 3.56, idrotm[346], "ONLY");
gMC->Gspos("I036", 2,"I018", 0.3087, 1.7191,-0.11, idrotm[346], "ONLY");
gMC->Gspos("I421", 1,"I420", 0.0, 0.0, 0.0, idrotm[312], "ONLY");
gMC->Gspos("I420", 1,"I028", -iI028dits[0]/3., iI028dits[1]-iI420dits[1], 0.0, 0, "ONLY");
gMC->Gspos("I424", 1,"I028", xI424, yI424, 0.0, 0, "ONLY");
- gMC->Gspos("I028", 1,"I024", 0.0, iI028dits[1]-iI024dits[1], iI024dits[2]-iI028dits[2], 0, "MANY");
+ gMC->Gspos("I028", 1,"I024", 0.0, iI028dits[1]-iI024dits[1], iI024dits[2]-iI028dits[2], 0, "ONLY");
// -- build the SDD ladder 3
gMC->Gspos("I556",2,"I553",1.0311,0.2033,-2.203,idrotm[577],"ONLY");
gMC->Gspos("I556",4,"I553",-1.031,0.2033,-0.287,idrotm[579],"ONLY");
gMC->Gspos("I559",2,"I553",-2.25,-1.615,0.0,idrotm[573],"ONLY");
- gMC->Gspos("I561",1,"I553",2.1,-1.615,-0.24,0,"MANY");
- gMC->Gspos("I561",2,"I553",-2.1,-1.615,-0.24,idrotm[573],"MANY");
+
+ gMC->Gspos("I561",1,"I553",2.1,-1.615,-0.24,0,"ONLY");
+ gMC->Gspos("I561",2,"I553",-2.1,-1.615,-0.24,idrotm[573],"ONLY");
+
gMC->Gspos("I519",37,"I523",0.0001,-1.79,-0.99,idrotm[586],"ONLY");
gMC->Gspos("I519",36,"I523",-3.2986,-1.79,-1.2943,0,"ONLY");
gMC->Gspos("I519",35,"I523",-3.2986,-1.71,-1.2943,0,"ONLY");
gMC->Gspos("I519",1,"I523",3.302,-1.71,-1.2943,0,"ONLY");
gMC->Gspos("I520",1,"I523",2.2501,-1.845,-1.19,0,"ONLY");
gMC->Gspos("I521",1,"I523",2.8161,-1.7075,-0.982,0,"ONLY");
- gMC->Gspos("I522",1,"I523",2.2501,-1.655,-1.3,idrotm[583],"MANY");
- gMC->Gspos("I522",2,"I523",-2.2499,-1.655,-1.3,idrotm[583],"MANY");
+
+ gMC->Gspos("I522",1,"I523",2.2501,-1.655,-1.3,idrotm[583],"ONLY");
+ gMC->Gspos("I522",2,"I523",-2.2499,-1.655,-1.3,idrotm[583],"ONLY");
+
gMC->Gspos("I542",2,"I523",-2.2499,-1.615,0.0,idrotm[573],"ONLY");
gMC->Gspos("I541",2,"I523",-2.2499,-1.615,0.0,idrotm[573],"ONLY");
gMC->Gspos("I541",1,"I523",2.2501,-1.615,0.0,0,"ONLY");
gMC->Gspos("I542",1,"I523",2.2501,-1.615,0.0,0,"ONLY");
- gMC->Gspos("I543",1,"I523",2.1001,-1.615,0.955,0,"MANY");
+ gMC->Gspos("I543",1,"I523",2.1001,-1.615,0.955,0,"ONLY");
gMC->Gspos("I543",2,"I523",-2.0999,-1.615,0.955,idrotm[573],"MANY");
gMC->Gspos("I537",2,"I523",1.7501,-1.52,0.0,idrotm[583],"ONLY");
gMC->Gspos("I538",2,"I523",1.8368,-1.3122,0.0,idrotm[575],"ONLY");
gMC->Gspos("I549",2,"I544",0.12,1.6613,0.0,idrotm[575],"ONLY");
gMC->Gspos("I549",3,"I544",-1.8367,-1.3122,0.0,idrotm[581],"ONLY");
gMC->Gspos("I548",3,"I544",-1.75,-1.52,0.0,idrotm[583],"ONLY");
- gMC->Gspos("I552",1,"I544",2.1,-1.615,-0.24,0,"MANY");
- gMC->Gspos("I552",2,"I544",-2.1,-1.615,-0.24,idrotm[573],"MANY");
+
+ gMC->Gspos("I552",1,"I544",2.1,-1.615,-0.24,0,"ONLY");
+ gMC->Gspos("I552",2,"I544",-2.1,-1.615,-0.24,idrotm[573],"ONLY");
+
gMC->Gspos("I515",12,"I516",-1.6896,-1.7075,-0.9822,0,"ONLY");
gMC->Gspos("I515",11,"I516",-1.6896,-1.7925,-0.9822,0,"ONLY");
gMC->Gspos("I513",37,"I516",0.0,-1.79,-1.035,idrotm[586],"ONLY");
gMC->Gspos("I529",1,"I516",1.8,-1.75,-0.195,idrotm[571],"ONLY");
gMC->Gspos("I530",1,"I516",0.0,-1.785,1.905,idrotm[571],"ONLY");
gMC->Gspos("I529",2,"I516",-1.8,-1.75,-0.195,idrotm[572],"ONLY");
- gMC->Gspos("I517",1,"I516",2.25,-1.655,-1.3,idrotm[583],"MANY");
- gMC->Gspos("I517",2,"I516",-2.25,-1.655,-1.3,idrotm[584],"MANY");
+
+ gMC->Gspos("I517",1,"I516",2.25,-1.655,-1.3,idrotm[583],"ONLY");
+ gMC->Gspos("I517",2,"I516",-2.25,-1.655,-1.3,idrotm[584],"ONLY");
+
gMC->Gspos("I531",2,"I516",-2.25,-1.615,0.0,idrotm[573],"ONLY");
gMC->Gspos("I531",1,"I516",2.25,-1.615,0.0,0,"ONLY");
gMC->Gspos("I532",1,"I516",2.25,-1.615,0.0,0,"ONLY");
gMC->Gspos("I532",2,"I516",-2.25,-1.615,0.0,idrotm[573],"ONLY");
- gMC->Gspos("I533",1,"I516",2.1,-1.615,0.955,0,"MANY");
+ gMC->Gspos("I533",1,"I516",2.1,-1.615,0.955,0,"ONLY");
gMC->Gspos("I533",2,"I516",-2.1,-1.615,0.955,idrotm[573],"MANY");
gMC->Gspos("ITS5",1,"I562",0.0,0.0,0.0,0,"ONLY");
}
if (! AliITSInitGeometry::SDDconeIsTGeoNative()) {
gMC->Gspos("ICY1",1,"IS02",0.0,0.0,0.,0,"ONLY");
gMC->Gspos("ICY2",1,"IS01",0.0,0.0,0.,0,"ONLY");
+ gMC->Gspos("ICY3",1,"IS01",0.0,0.0,0.,0,"ONLY");
+ gMC->Gspos("ICY4",1,"IS01",0.0,0.0,0.,0,"ONLY");
// --- Place volumes of SDD cone ----------------------------------
- gMC->Gspos("I093",1,"IS02",0.0,0.0,0.0,0,"MANY");
- gMC->Gspos("I093",2,"IS02",0.0,0.0,0.0,idrotm[856],"MANY");
- gMC->Gspos("I099",4,"IS02",0.0,0.0,0.0,idrotm[857],"MANY");
- gMC->Gspos("I099",3,"IS02",0.0,0.0,0.0,idrotm[858],"MANY");
- gMC->Gspos("I099",5,"IS02",0.0,0.0,0.0,idrotm[859],"MANY");
- gMC->Gspos("I099",6,"IS02",0.0,0.0,0.0,idrotm[860],"MANY");
- gMC->Gspos("I099",7,"IS02",0.0,0.0,0.0,idrotm[861],"MANY");
- gMC->Gspos("I099",2,"IS02",0.0,0.0,0.0,idrotm[862],"MANY");
- gMC->Gspos("I200",4,"IS02",0.0,0.0,0.0,idrotm[863],"MANY");
- gMC->Gspos("I200",3,"IS02",0.0,0.0,0.0,idrotm[864],"MANY");
- gMC->Gspos("I200",2,"IS02",0.0,0.0,0.0,idrotm[865],"MANY");
- gMC->Gspos("I200",13,"IS02",0.0,0.0,0.0,idrotm[867],"MANY");
- gMC->Gspos("I200",12,"IS02",0.0,0.0,0.0,idrotm[869],"MANY");
- gMC->Gspos("I200",11,"IS02",0.0,0.0,0.0,idrotm[870],"MANY");
- gMC->Gspos("I200",10,"IS02",0.0,0.0,0.0,idrotm[871],"MANY");
- gMC->Gspos("I200",9,"IS02",0.0,0.0,0.0,idrotm[872],"MANY");
- gMC->Gspos("I200",8,"IS02",0.0,0.0,0.0,idrotm[873],"MANY");
- gMC->Gspos("I200",7,"IS02",0.0,0.0,0.0,idrotm[874],"MANY");
- gMC->Gspos("I200",6,"IS02",0.0,0.0,0.0,idrotm[875],"MANY");
- gMC->Gspos("I200",5,"IS02",0.0,0.0,0.0,idrotm[876],"MANY");
+ gMC->Gspos("I093",1,"IS02",0.0,0.0,0.0,0,"ONLY");
+ gMC->Gspos("I093",2,"IS02",0.0,0.0,0.0,idrotm[856],"ONLY");
+ gMC->Gspos("I099",4,"IS02",0.0,0.0,0.0,idrotm[857],"ONLY");
+ gMC->Gspos("I099",3,"IS02",0.0,0.0,0.0,idrotm[858],"ONLY");
+ gMC->Gspos("I099",5,"IS02",0.0,0.0,0.0,idrotm[859],"ONLY");
+ gMC->Gspos("I099",6,"IS02",0.0,0.0,0.0,idrotm[860],"ONLY");
+ gMC->Gspos("I099",7,"IS02",0.0,0.0,0.0,idrotm[861],"ONLY");
+ gMC->Gspos("I099",2,"IS02",0.0,0.0,0.0,idrotm[862],"ONLY");
+ gMC->Gspos("I200",4,"IS02",0.0,0.0,0.0,idrotm[863],"ONLY");
+ gMC->Gspos("I200",3,"IS02",0.0,0.0,0.0,idrotm[864],"ONLY");
+ gMC->Gspos("I200",2,"IS02",0.0,0.0,0.0,idrotm[865],"ONLY");
+ gMC->Gspos("I200",13,"IS02",0.0,0.0,0.0,idrotm[867],"ONLY");
+ gMC->Gspos("I200",12,"IS02",0.0,0.0,0.0,idrotm[869],"ONLY");
+ gMC->Gspos("I200",11,"IS02",0.0,0.0,0.0,idrotm[870],"ONLY");
+ gMC->Gspos("I200",10,"IS02",0.0,0.0,0.0,idrotm[871],"ONLY");
+ gMC->Gspos("I200",9,"IS02",0.0,0.0,0.0,idrotm[872],"ONLY");
+ gMC->Gspos("I200",8,"IS02",0.0,0.0,0.0,idrotm[873],"ONLY");
+ gMC->Gspos("I200",7,"IS02",0.0,0.0,0.0,idrotm[874],"ONLY");
+ gMC->Gspos("I200",6,"IS02",0.0,0.0,0.0,idrotm[875],"ONLY");
+ gMC->Gspos("I200",5,"IS02",0.0,0.0,0.0,idrotm[876],"ONLY");
gMC->Gspos("I090",2,"IS02",0.0,0.0,-39.4,0,"ONLY");
gMC->Gspos("I090",1,"IS02",0.0,0.0,39.4,idrotm[856],"ONLY");
gMC->Gspos("I099",9,"IS02",0.0,0.0,0.0,idrotm[877],"ONLY");
gMC->Gspos("I200",21,"IS02",0.0,0.0,0.0,idrotm[892],"ONLY");
gMC->Gspos("I200",20,"IS02",0.0,0.0,0.0,idrotm[868],"ONLY");
gMC->Gspos("I200",19,"IS02",0.0,0.0,0.0,idrotm[893],"ONLY");
- gMC->Gspos("I098",1,"IS02",0.0,0.0,33.6,0,"MANY");
- gMC->Gspos("I097",1,"IS02",0.0,0.0,26.6,0,"MANY");
- gMC->Gspos("I097",2,"IS02",0.0,0.0,-26.6,idrotm[856],"MANY");
- gMC->Gspos("I098",2,"IS02",0.0,0.0,-33.6,idrotm[856],"MANY");
+
+ gMC->Gspos("I098",1,"IS02",0.0,0.0,33.6,0,"ONLY");
+ gMC->Gspos("I097",1,"IS02",0.0,0.0,26.6,0,"ONLY");
+ gMC->Gspos("I097",2,"IS02",0.0,0.0,-26.6,idrotm[856],"ONLY");
+ gMC->Gspos("I098",2,"IS02",0.0,0.0,-33.6,idrotm[856],"ONLY");
+
gMC->Gspos("I202",1,"IS02",12.1,0.0,33.84,0,"ONLY");
gMC->Gspos("I202",6,"IS02",-6.05,-10.4789,33.84,idrotm[930],"ONLY");
gMC->Gspos("I202",5,"IS02",-6.05,10.4789,33.84,idrotm[929],"ONLY");
gMC->Gspos("I203",2,"IS02",10.9227,18.9186,42.24,idrotm[853],"ONLY");
gMC->Gspos("I203",1,"IS02",21.8453,0.0,42.24,0,"ONLY");
gMC->Gspos("I095",1,"I098",0.0,0.0,0.0,0,"ONLY");
+
+ //I096 and I098 are real volume that are really overlapping, can not use ONLY
gMC->Gspos("I096",23,"I098",22.77,0.0,0.0,idrotm[894],"MANY");
gMC->Gspos("I096",14,"I098",22.3754,6.57,0.0,idrotm[895],"MANY");
gMC->Gspos("I096",3,"I098",19.1553,12.3104,0.0,idrotm[896],"MANY");
gMC->Gspos("I096",10,"I098",15.2714,-17.6241,0.0,idrotm[914],"MANY");
gMC->Gspos("I096",21,"I098",19.1553,-12.3104,0.0,idrotm[915],"MANY");
gMC->Gspos("I096",12,"I098",22.3754,-6.57,0.0,idrotm[916],"MANY");
+
gMC->Gspos("I094",1,"I097",0.0,0.0,0.0,0,"ONLY");
+
+ // idem
gMC->Gspos("I096",1,"I097",13.87,0.0,0.0,idrotm[894],"MANY");
gMC->Gspos("I096",32,"I097",13.037,6.2783,0.0,idrotm[917],"MANY");
gMC->Gspos("I096",25,"I097",8.6478,10.844,0.0,idrotm[918],"MANY");
if (! AliITSInitGeometry::SSDconeIsTGeoNative()) {
- gMC->Gspos("I212",2,"IS01",0.0,0.0,0.0,idrotm[701],"MANY");
- gMC->Gspos("I212",1,"IS01",0.0,0.0,0.0,0,"MANY");
+ gMC->Gspos("I212",2,"IS01",0.0,0.0,0.0,idrotm[701],"ONLY");
+ gMC->Gspos("I212",1,"IS01",0.0,0.0,0.0,0,"ONLY");
gMC->Gspos("I211",1,"IS01",0.0,0.0,-56.5,0,"ONLY");
+
gMC->Gspos("I217",1,"IS01",0.0,0.0,-44.4,0,"ONLY"); // this will change after PPR to be symmetric
- gMC->Gspos("I219",1,"IS01",0.0,0.0,-50.25,0,"ONLY"); // this will change after PPR to be symmetric
+ // Unfortunately the following piece is not compatible with new SSD
+ if (! AliITSInitGeometry::SSDIsTGeoNative())
+ gMC->Gspos("I219",1,"IS01",0.0,0.0,-50.25,0,"ONLY"); // this will change after PPR to be symmetric
gMC->Gspos("I211",2,"IS01",0.0,0.0,56.5,idrotm[701],"ONLY");
- gMC->Gspos("I219",2,"IS01",0.0,0.0,51.65,idrotm[701],"ONLY"); // this will change after PPR to be symmetric
+
+ // Unfortunately the following piece is not compatible with new SSD
+ if (! AliITSInitGeometry::SSDIsTGeoNative())
+ gMC->Gspos("I219",2,"IS01",0.0,0.0,51.65,idrotm[701],"ONLY"); // this will change after PPR to be symmetric
gMC->Gspos("I217",2,"IS01",0.0,0.0,45.8,idrotm[701],"ONLY"); // this will change after PPR to be symmetric
gMC->Gspos("I214",2,"IS01",0.0,0.0,67.25,idrotm[701],"ONLY");
gMC->Gspos("I213",2,"IS01",0.0,0.0,62.25,idrotm[701],"ONLY");
gMC->Gspos("I213",1,"IS01",0.0,0.0,-62.25,0,"ONLY");
- gMC->Gspos("I214",1,"IS01",0.0,0.0,-67.25,0,"ONLY");
- gMC->Gspos("I215",19,"IS01",0.0,0.0,0.0,idrotm[702],"MANY");
- gMC->Gspos("I215",21,"IS01",0.0,0.0,0.0,idrotm[703],"MANY");
- gMC->Gspos("I215",23,"IS01",0.0,0.0,0.0,idrotm[704],"MANY");
- gMC->Gspos("I215",24,"IS01",0.0,0.0,0.0,idrotm[705],"MANY");
- gMC->Gspos("I215",3,"IS01",0.0,0.0,0.0,idrotm[706],"MANY");
- gMC->Gspos("I215",5,"IS01",0.0,0.0,0.0,idrotm[707],"MANY");
- gMC->Gspos("I215",7,"IS01",0.0,0.0,0.0,idrotm[708],"MANY");
- gMC->Gspos("I215",9,"IS01",0.0,0.0,0.0,idrotm[709],"MANY");
- gMC->Gspos("I215",11,"IS01",0.0,0.0,0.0,idrotm[710],"MANY");
- gMC->Gspos("I215",13,"IS01",0.0,0.0,0.0,idrotm[711],"MANY");
- gMC->Gspos("I215",15,"IS01",0.0,0.0,0.0,idrotm[712],"MANY");
- gMC->Gspos("I215",17,"IS01",0.0,0.0,0.0,idrotm[713],"MANY");
- gMC->Gspos("I216",9,"IS01",0.0,0.0,45.5,idrotm[714],"ONLY");
- gMC->Gspos("I216",11,"IS01",0.0,0.0,45.5,idrotm[715],"ONLY");
- gMC->Gspos("I216",12,"IS01",0.0,0.0,45.5,idrotm[716],"ONLY");
- gMC->Gspos("I216",3,"IS01",0.0,0.0,45.5,idrotm[717],"ONLY");
- gMC->Gspos("I216",5,"IS01",0.0,0.0,45.5,idrotm[718],"ONLY");
- gMC->Gspos("I216",7,"IS01",0.0,0.0,45.5,idrotm[719],"ONLY");
- gMC->Gspos("I216",10,"IS01",0.0,0.0,-44,idrotm[720],"ONLY");
- gMC->Gspos("I216",1,"IS01",0.0,0.0,-44,idrotm[721],"ONLY");
- gMC->Gspos("I216",2,"IS01",0.0,0.0,-44,idrotm[722],"ONLY");
- gMC->Gspos("I216",4,"IS01",0.0,0.0,-44,idrotm[723],"ONLY");
- gMC->Gspos("I216",6,"IS01",0.0,0.0,-44,idrotm[724],"ONLY");
- gMC->Gspos("I216",8,"IS01",0.0,0.0,-44,idrotm[725],"ONLY");
- gMC->Gspos("I215",1,"IS01",0.0,0.0,0.0,idrotm[726],"MANY");
- gMC->Gspos("I215",2,"IS01",0.0,0.0,0.0,idrotm[727],"MANY");
- gMC->Gspos("I215",4,"IS01",0.0,0.0,0.0,idrotm[728],"MANY");
- gMC->Gspos("I215",6,"IS01",0.0,0.0,0.0,idrotm[729],"MANY");
- gMC->Gspos("I215",8,"IS01",0.0,0.0,0.0,idrotm[733],"MANY");
- gMC->Gspos("I215",10,"IS01",0.0,0.0,0.0,idrotm[730],"MANY");
- gMC->Gspos("I215",12,"IS01",0.0,0.0,0.0,idrotm[731],"MANY");
- gMC->Gspos("I215",14,"IS01",0.0,0.0,0.0,idrotm[768],"MANY");
- gMC->Gspos("I215",16,"IS01",0.0,0.0,0.0,idrotm[732],"MANY");
- gMC->Gspos("I215",18,"IS01",0.0,0.0,0.0,idrotm[734],"MANY");
- gMC->Gspos("I215",20,"IS01",0.0,0.0,0.0,idrotm[798],"MANY");
- gMC->Gspos("I215",22,"IS01",0.0,0.0,0.0,idrotm[735],"MANY");
+ gMC->Gspos("I214",1,"IS01",0.0,0.0,-67.25,0,"ONLY");
+
+ gMC->Gspos("I215",19,"IS01",0.0,0.0,0.0,idrotm[702],"ONLY");
+ gMC->Gspos("I215",21,"IS01",0.0,0.0,0.0,idrotm[703],"ONLY");
+ gMC->Gspos("I215",23,"IS01",0.0,0.0,0.0,idrotm[704],"ONLY");
+ gMC->Gspos("I215",24,"IS01",0.0,0.0,0.0,idrotm[705],"ONLY");
+ gMC->Gspos("I215",3,"IS01",0.0,0.0,0.0,idrotm[706],"ONLY");
+ gMC->Gspos("I215",5,"IS01",0.0,0.0,0.0,idrotm[707],"ONLY");
+ gMC->Gspos("I215",7,"IS01",0.0,0.0,0.0,idrotm[708],"ONLY");
+ gMC->Gspos("I215",9,"IS01",0.0,0.0,0.0,idrotm[709],"ONLY");
+ gMC->Gspos("I215",11,"IS01",0.0,0.0,0.0,idrotm[710],"ONLY");
+ gMC->Gspos("I215",13,"IS01",0.0,0.0,0.0,idrotm[711],"ONLY");
+ gMC->Gspos("I215",15,"IS01",0.0,0.0,0.0,idrotm[712],"ONLY");
+ gMC->Gspos("I215",17,"IS01",0.0,0.0,0.0,idrotm[713],"ONLY");
+
+ // Unfortunately the following piece is not compatible with new SSD
+ if (! AliITSInitGeometry::SSDIsTGeoNative()) {
+ gMC->Gspos("I216",9,"IS01",0.0,0.0,45.5,idrotm[714],"ONLY");
+ gMC->Gspos("I216",11,"IS01",0.0,0.0,45.5,idrotm[715],"ONLY");
+ gMC->Gspos("I216",12,"IS01",0.0,0.0,45.5,idrotm[716],"ONLY");
+ gMC->Gspos("I216",3,"IS01",0.0,0.0,45.5,idrotm[717],"ONLY");
+ gMC->Gspos("I216",5,"IS01",0.0,0.0,45.5,idrotm[718],"ONLY");
+ gMC->Gspos("I216",7,"IS01",0.0,0.0,45.5,idrotm[719],"ONLY");
+ gMC->Gspos("I216",10,"IS01",0.0,0.0,-44,idrotm[720],"ONLY");
+ gMC->Gspos("I216",1,"IS01",0.0,0.0,-44,idrotm[721],"ONLY");
+ gMC->Gspos("I216",2,"IS01",0.0,0.0,-44,idrotm[722],"ONLY");
+ gMC->Gspos("I216",4,"IS01",0.0,0.0,-44,idrotm[723],"ONLY");
+ gMC->Gspos("I216",6,"IS01",0.0,0.0,-44,idrotm[724],"ONLY");
+ gMC->Gspos("I216",8,"IS01",0.0,0.0,-44,idrotm[725],"ONLY");
+ }
+
+ gMC->Gspos("I215",1,"IS01",0.0,0.0,0.0,idrotm[726],"ONLY");
+ gMC->Gspos("I215",2,"IS01",0.0,0.0,0.0,idrotm[727],"ONLY");
+ gMC->Gspos("I215",4,"IS01",0.0,0.0,0.0,idrotm[728],"ONLY");
+ gMC->Gspos("I215",6,"IS01",0.0,0.0,0.0,idrotm[729],"ONLY");
+ gMC->Gspos("I215",8,"IS01",0.0,0.0,0.0,idrotm[733],"ONLY");
+ gMC->Gspos("I215",10,"IS01",0.0,0.0,0.0,idrotm[730],"ONLY");
+ gMC->Gspos("I215",12,"IS01",0.0,0.0,0.0,idrotm[731],"ONLY");
+ gMC->Gspos("I215",14,"IS01",0.0,0.0,0.0,idrotm[768],"ONLY");
+ gMC->Gspos("I215",16,"IS01",0.0,0.0,0.0,idrotm[732],"ONLY");
+ gMC->Gspos("I215",18,"IS01",0.0,0.0,0.0,idrotm[734],"ONLY");
+ gMC->Gspos("I215",20,"IS01",0.0,0.0,0.0,idrotm[798],"ONLY");
+ gMC->Gspos("I215",22,"IS01",0.0,0.0,0.0,idrotm[735],"ONLY");
}
// --- Place subdetectors' mother volumes and supports' mother volumes
// into ITS mother volume ITSD
if (! AliITSInitGeometry::SPDIsTGeoNative())
- gMC->Gspos("IT12",1,"ITSD",0.0,0.0,0.0,0,"MANY"); // SPD mother volume
+ gMC->Gspos("IT12",1,"ITSD",0.0,0.0,0.0,0,"ONLY"); // SPD mother volume
if (! AliITSInitGeometry::SDDIsTGeoNative())
- gMC->Gspos("IT34",1,"ITSD",0.0,0.0,0.0,0,"MANY"); // SDD mother volume
+ gMC->Gspos("IT34",1,"ITSD",0.0,0.0,0.0,0,"ONLY"); // SDD mother volume
if (! AliITSInitGeometry::SSDIsTGeoNative())
- gMC->Gspos("IT56",1,"ITSD",0.0,0.0,0.0,0,"MANY"); // SSD mother volume
+ gMC->Gspos("IT56",1,"ITSD",0.0,0.0,0.0,0,"ONLY"); // SSD mother volume
if (! AliITSInitGeometry::SDDconeIsTGeoNative())
- gMC->Gspos("IS02",1,"ITSD",0.0,0.0,0.0,0,"MANY"); // SDD cones/supports
+ gMC->Gspos("IS02",1,"ITSD",0.0,0.0,0.0,0,"ONLY"); // SDD cones/supports
if (! AliITSInitGeometry::SSDconeIsTGeoNative())
- gMC->Gspos("IS01",1,"ITSD",0.0,0.0,0.0,0,"MANY"); // SSD cones/supports
+ gMC->Gspos("IS01",1,"ITSD",0.0,0.0,0.0,0,"ONLY"); // SSD cones/supports
// **************************** SERVICES *********************************
gMC->Gspos("I2CC", 1, "ITSV", 0., 0., 83.5, 0, "ONLY");
gMC->Gspos("I2CC", 2, "ITSV", 0., 0., -83.5, idrotm[200], "ONLY");
-
// --- DEFINE PATCH PANELS AT THE END OF THE ITS CONES
// UPPER PART
gMC->Gspos("IPA2", 1, "ITSV", 0., 0., 95.25, 0, "ONLY");
gMC->Gspos("IPA2", 2, "ITSV", 0., 0., -95.25, idrotm[200], "ONLY");
+ } // Move this graph down as you implement services in TGeo - M.S. 28may08
+
// --- DEFINE CABLES/COOLING BELOW THE TPC ON THE ABSORBER SIDE - COPPER PART
// UPPER PART
- dgh[0] = (ztpc-97.5)/2.;
+ dgh[0] = (ztpc-97.5-2.3)/2.;
dgh[1] = 46.2;
dgh[2] = 46.2+1.0;
dgh[3] = 62.3;
dgh[5] = 12.;
dgh[6] = 168.;
gMC->Gsvolu("ICU1", "CONS", idtmed[213], dgh, 7);
- gMC->Gspos("ICU1", 1, "ITSV", 0., 0., 97.5+dgh[0], 0, "ONLY");
+ // gMC->Gspos("ICU1", 1, "ITSV", 0., 0.,97.5+dgh[0], 0, "ONLY");
+ gMC->Gspos("ICU1", 1, "ITSV", 0., 0.,-(97.5+dgh[0]+4.6), idrotm[199], "ONLY");
// --- DEFINE CABLES/COOLING BELOW THE TPC ON THE ABSORBER SIDE - COPPER PART
// LOWER PART
- dgh[0] = (ztpc-97.5)/2.;
+ dgh[0] = (ztpc-97.5-2.3)/2.;
dgh[1] = 46.2;
dgh[2] = 46.2+1.0;
dgh[3] = 62.3;
dgh[5] = 192.;
dgh[6] = 348.;
gMC->Gsvolu("ICU2", "CONS", idtmed[213], dgh, 7);
- gMC->Gspos("ICU2", 1, "ITSV", 0., 0., 97.5+dgh[0], 0, "ONLY");
+ // gMC->Gspos("ICU2", 1, "ITSV", 0., 0., 97.5+dgh[0], 0, "ONLY");
+ gMC->Gspos("ICU2", 1, "ITSV", 0., 0., -(97.5+dgh[0]+4.6), idrotm[199], "ONLY");
// -- DEFINE CABLES/COOLING BELOW THE TPC ON THE ABSORBER SIDE - CARBON PART
// UPPER PART
- dgh[0] = (ztpc-97.5)/2.;
+ dgh[0] = (ztpc-97.5-2.3)/2.;
dgh[1] = 46.2+1.0;
dgh[2] = 46.2+1.0+1.5;
dgh[3] = 62.3+1.0;
dgh[5] = 12.;
dgh[6] = 168.;
gMC->Gsvolu("ICC1", "CONS", idtmed[225], dgh, 7);
- gMC->Gspos("ICC1", 1, "ITSV", 0., 0., 97.5+dgh[0], 0, "ONLY");
+ // gMC->Gspos("ICC1", 1, "ITSV", 0., 0., 97.5+dgh[0], 0, "ONLY");
+ gMC->Gspos("ICC1", 1, "ITSV", 0., 0., -(97.5+dgh[0]+4.6), idrotm[199], "ONLY");
// --- DEFINE CABLES/COOLING BELOW THE TPC ON THE ABSORBER SIDE - CARBON PART
// LOWER PART
- dgh[0] = (ztpc-97.5)/2.;
+ dgh[0] = (ztpc-97.5-2.3)/2.;
dgh[1] = 46.2+1.0;
dgh[2] = 46.2+1.0+1.5;
dgh[3] = 62.3+1.0;
dgh[5] = 192.;
dgh[6] = 348.;
gMC->Gsvolu("ICC2", "CONS", idtmed[225], dgh, 7);
- gMC->Gspos("ICC2", 1, "ITSV", 0., 0., 97.5+dgh[0], 0, "ONLY");
+ // gMC->Gspos("ICC2", 1, "ITSV", 0., 0., 97.5+dgh[0], 0, "ONLY");
+ gMC->Gspos("ICC2", 1, "ITSV", 0., 0., -(97.5+dgh[0]+4.6), idrotm[199], "ONLY");
// -- DEFINE CABLES/COOLING BEHIND THE TPC ON THE ABSORBER SIDE - COPPER PART
// UPPER PART
- dgh[0] = 62.;
+ dgh[0] = 62.2;
dgh[1] = 74.5;
dgh[2] = 0.5;
dgh[3] = 12.;
dgh[4] = 168.;
gMC->Gsvolu("ICU3", "TUBS", idtmed[213], dgh, 5);
- gMC->Gspos("ICU3", 1, "ITSV", 0., 0., ztpc+1.5+dgh[2], 0, "ONLY");
+ // gMC->Gspos("ICU3", 1, "ITSV", 0., 0., ztpc+1.5+dgh[2], 0, "ONLY");
+ gMC->Gspos("ICU3", 1, "ITSV", 0., 0., -(ztpc+1.5+dgh[2]+1.), idrotm[199], "ONLY");
// -- DEFINE CABLES/COOLING BEHIND THE TPC ON THE ABSORBER SIDE - COPPER PART
// LOWER PART
- dgh[0] = 62.;
+ dgh[0] = 62.2;
dgh[1] = 74.5;
dgh[2] = 0.5;
dgh[3] = 192.;
dgh[4] = 348.;
gMC->Gsvolu("ICU4", "TUBS", idtmed[213], dgh, 5);
- gMC->Gspos("ICU4", 1, "ITSV", 0., 0., ztpc+1.5+dgh[2], 0, "ONLY");
+ // gMC->Gspos("ICU4", 1, "ITSV", 0., 0., ztpc+1.5+dgh[2], 0, "ONLY");
+ gMC->Gspos("ICU4", 1, "ITSV", 0., 0., -(ztpc+1.5+dgh[2]+1.), idrotm[199], "ONLY");
// -- DEFINE CABLES/COOLING BEHIND THE TPC ON THE ABSORBER SIDE - CARBON PART
// UPPER PART
- dgh[0] = 62.1;
+ dgh[0] = 64.8;
dgh[1] = 74.5;
dgh[2] = 0.75;
dgh[3] = 12.;
dgh[4] = 168.;
gMC->Gsvolu("ICC3", "TUBS", idtmed[225], dgh, 5);
- gMC->Gspos("ICC3", 1, "ITSV", 0., 0., ztpc+dgh[2], 0, "ONLY");
+ // gMC->Gspos("ICC3", 1, "ITSV", 0., 0., ztpc+dgh[2], 0, "ONLY");
+ gMC->Gspos("ICC3", 1, "ITSV", 0., 0., -(ztpc+dgh[2]), idrotm[199], "ONLY");
// -- DEFINE CABLES/COOLING BEHIND THE TPC ON THE ABSORBER SIDE - CARBON PART
// LOWER PART
- dgh[0] = 62.1;
+ dgh[0] = 64.8;
dgh[1] = 74.5;
dgh[2] = 0.75;
dgh[3] = 192.;
dgh[4] = 348.;
gMC->Gsvolu("ICC4", "TUBS", idtmed[225], dgh, 5);
- gMC->Gspos("ICC4", 1, "ITSV", 0., 0., ztpc+dgh[2], 0, "ONLY");
+ // gMC->Gspos("ICC4", 1, "ITSV", 0., 0., ztpc+dgh[2], 0, "ONLY");
+ gMC->Gspos("ICC4", 1, "ITSV", 0., 0., -(ztpc+dgh[2]), idrotm[199], "ONLY");
// --- DEFINE CABLES/COOLING BELOW THE TPC ON THE OTHER SIDE W.R.T.
// THE ABSORBER - COPPER PART - UPPER PART
-
+
dgh[0] = 46.;
dgh[1] = 46.+1.0;
- dgh[2] = (ztpc-97.5+1.5)/2.;
+// dgh[2] = (ztpc-97.5+1.5-2.5)/2.;
+ dgh[2] = (186.6 - 101.1)/2.;
dgh[3] = 12.;
dgh[4] = 168.;
gMC->Gsvolu("ICU5", "TUBS", idtmed[213], dgh, 5);
- gMC->Gspos("ICU5", 1, "ITSV", 0., 0., -97.5-dgh[2], 0, "ONLY");
-
+ // gMC->Gspos("ICU5", 1, "ITSV", 0., 0., -97.5-dgh[2], 0, "ONLY");
+ gMC->Gspos("ICU5", 1, "ITSV", 0., 0., -(-101.1-dgh[2]), idrotm[199], "ONLY");
+
+ dgh[0] = (ztpc - 1.0 - 186.6)/2.;
+ dgh[1] = 64.0;
+ dgh[2] = 64.0+1.0;
+ dgh[3] = 46.;
+ dgh[4] = 46.+1.0;
+ dgh[5] = 12.;
+ dgh[6] = 168.;
+ gMC->Gsvolu("ICU9", "CONS", idtmed[213], dgh, 7);
+ gMC->Gspos("ICU9", 1, "ITSV", 0., 0., -(-186.6-dgh[0]), idrotm[199], "ONLY");
+
// --- DEFINE CABLES/COOLING BELOW THE TPC ON THE OTHER SIDE W.R.T.
// THE ABSORBER - COPPER PART - LOWER PART
dgh[0] = 46.;
dgh[1] = 46.+1.0;
- dgh[2] = (ztpc-97.5+1.5)/2.;
+// dgh[2] = (ztpc-97.5+1.5-2.5)/2.;
+ dgh[2] = (186.6 - 101.1)/2.;
dgh[3] = 192.;
dgh[4] = 348.;
gMC->Gsvolu("ICU6", "TUBS", idtmed[213], dgh, 5);
- gMC->Gspos("ICU6", 1, "ITSV", 0., 0., -97.5-dgh[2], 0, "ONLY");
-
+ // gMC->Gspos("ICU6", 1, "ITSV", 0., 0., -97.5-dgh[2], 0, "ONLY");
+ gMC->Gspos("ICU6", 1, "ITSV", 0., 0., -(-101.1-dgh[2]), idrotm[199], "ONLY");
+
+ dgh[0] = (ztpc - 1.0 - 186.6)/2.;
+ dgh[1] = 64.0;
+ dgh[2] = 64.0+1.0;
+ dgh[3] = 46.;
+ dgh[4] = 46.+1.0;
+ dgh[5] = 192.;
+ dgh[6] = 348.;
+ gMC->Gsvolu("ICU0", "CONS", idtmed[213], dgh, 7);
+ gMC->Gspos("ICU0", 1, "ITSV", 0., 0., -(-186.6-dgh[0]), idrotm[199], "ONLY");
+
// --- DEFINE CABLES/COOLING BELOW THE TPC ON THE OTHER SIDE W.R.T.
// THE ABSORBER - CARBON PART - UPPER PART
dgh[0] = 46.+1.0;
dgh[1] = 46.+1.0+1.5;
- dgh[2] = (ztpc-97.5)/2.;
+// dgh[2] = (ztpc-97.5)/2.;
+ dgh[2] = (186.6 - 101.1)/2.;
dgh[3] = 12.;
dgh[4] = 168.;
gMC->Gsvolu("ICC5", "TUBS", idtmed[225], dgh, 5);
- gMC->Gspos("ICC5", 1, "ITSV", 0., 0., -97.5-dgh[2], 0, "ONLY");
+ // gMC->Gspos("ICC5", 1, "ITSV", 0., 0., -97.5-dgh[2], 0, "ONLY");
+ gMC->Gspos("ICC5", 1, "ITSV", 0., 0., -(-101.1-dgh[2]), idrotm[199], "ONLY");
+ dgh[0] = (ztpc - 1.0 - 186.6)/2.;
+ dgh[1] = 64.0+1.0;
+ dgh[2] = 64.0+1.0+1.5;
+ dgh[3] = 46.+1.0;
+ dgh[4] = 46.+1.0+1.5;
+ dgh[5] = 12.;
+ dgh[6] = 168.;
+ gMC->Gsvolu("ICC9", "CONS", idtmed[225], dgh, 7);
+ gMC->Gspos("ICC9", 1, "ITSV", 0., 0., -(-186.6-dgh[0]), idrotm[199], "ONLY");
+
// --- DEFINE CABLES/COOLING BELOW THE TPC ON THE OTHER SIDE W.R.T.
// THE ABSORBER - CARBON PART - LOWER PART
dgh[0] = 46.+1.0;
dgh[1] = 46.+1.0+1.5;
- dgh[2] = (ztpc-97.5)/2.;
+// dgh[2] = (ztpc-97.5)/2.;
+ dgh[2] = (186.6 - 101.1)/2.;
dgh[3] = 192.;
dgh[4] = 348.;
gMC->Gsvolu("ICC6", "TUBS", idtmed[225], dgh, 5);
- gMC->Gspos("ICC6", 1, "ITSV", 0., 0., -97.5-dgh[2], 0, "ONLY");
+ // gMC->Gspos("ICC6", 1, "ITSV", 0., 0., -97.5-dgh[2], 0, "ONLY");
+ gMC->Gspos("ICC6", 1, "ITSV", 0., 0., -(-101.1-dgh[2]), idrotm[199], "ONLY");
+
+ dgh[0] = (ztpc - 1.0 - 186.6)/2.;
+ dgh[1] = 64.0+1.0;
+ dgh[2] = 64.0+1.0+1.5;
+ dgh[3] = 46.+1.0;
+ dgh[4] = 46.+1.0+1.5;
+ dgh[5] = 192.;
+ dgh[6] = 348.;
+ gMC->Gsvolu("ICC0", "CONS", idtmed[225], dgh, 7);
+ gMC->Gspos("ICC0", 1, "ITSV", 0., 0., -(-186.6-dgh[0]), idrotm[199], "ONLY");
// --- DEFINE CABLES/COOLING BEHIND THE TPC ON OTHER SIDE W.R.T. THE ABSORBER
// COPPER PART - UPPER PART
- dgh[0] = 46.;
+ dgh[0] = 64.0;
dgh[1] = 74.5;
dgh[2] = 0.5;
dgh[3] = 12.;
dgh[4] = 168.;
gMC->Gsvolu("ICU7", "TUBS", idtmed[213], dgh, 5);
- gMC->Gspos("ICU7", 1, "ITSV", 0., 0., -(ztpc+1.5+dgh[2]), 0, "ONLY");
+ gMC->Gspos("ICU7", 1, "ITSV", 0., 0., (ztpc+1.5+dgh[2]), idrotm[199], "ONLY");
// --- DEFINE CABLES/COOLING BEHIND THE TPC ON OTHER SIDE W.R.T. THE ABSORBER
// COPPER PART - LOWER PART
- dgh[0] = 46.;
+ dgh[0] = 64.0;
dgh[1] = 74.5;
dgh[2] = 0.5;
dgh[3] = 192.;
dgh[4] = 348.;
gMC->Gsvolu("ICU8", "TUBS", idtmed[213], dgh, 5);
- gMC->Gspos("ICU8", 1, "ITSV", 0., 0., -(ztpc+1.5+dgh[2]), 0, "ONLY");
+ gMC->Gspos("ICU8", 1, "ITSV", 0., 0., (ztpc+1.5+dgh[2]), idrotm[199], "ONLY");
// --- DEFINE CABLES/COOLING BEHIND THE TPC ON OTHER SIDE W.R.T. THE ABSORBER
// CARBON PART - UPPER PART
- dgh[0] = 46.+1.0;
+ dgh[0] = 64.0+1.0;
dgh[1] = 74.5;
dgh[2] = 0.75;
dgh[3] = 12.;
dgh[4] = 168.;
gMC->Gsvolu("ICC7", "TUBS", idtmed[225], dgh, 5);
- gMC->Gspos("ICC7", 1, "ITSV", 0., 0., -(ztpc+dgh[2]), 0, "ONLY");
+ gMC->Gspos("ICC7", 1, "ITSV", 0., 0., (ztpc+dgh[2]), idrotm[199], "ONLY");
// --- DEFINE CABLES/COOLING BEHIND THE TPC ON OTHER SIDE W.R.T. THE ABSORBER
// CARBON PART - LOWER PART
- dgh[0] = 46.+1.0;
+ dgh[0] = 64.0+1.0;
dgh[1] = 74.5;
dgh[2] = 0.75;
dgh[3] = 192.;
dgh[4] = 348.;
gMC->Gsvolu("ICC8", "TUBS", idtmed[225], dgh, 5);
- gMC->Gspos("ICC8", 1, "ITSV", 0., 0., -(ztpc+dgh[2]), 0, "ONLY");
+ gMC->Gspos("ICC8", 1, "ITSV", 0., 0., (ztpc+dgh[2]), idrotm[199], "ONLY");
+
+
// --- DEFINE HOOK TO THE TPC ON OTHER SIDE W.R.T. THE ABSORBER - UPPER PART
- dgh[0] = 74.5;
- dgh[1] = 79.5;
+ dgh[0] = 74.7;
+ dgh[1] = 75.3;
dgh[2] = 2.5;
dgh[3] = 12.;
dgh[4] = 168.;
gMC->Gsvolu("IHK1", "TUBS", idtmed[264], dgh, 5);
- gMC->Gspos("IHK1", 1, "ITSV", 0., 0., -ztpc-dgh[2], 0, "ONLY");
+ gMC->Gspos("IHK1", 1, "ITSV", 0., 0., -(-ztpc-dgh[2]), idrotm[199], "ONLY");
// --- DEFINE HOOK TO THE TPC ON OTHER SIDE W.R.T. THE ABSORBER - LOWER PART
- dgh[0] = 74.5;
- dgh[1] = 79.5;
+ dgh[0] = 74.7;
+ dgh[1] = 75.3;
dgh[2] = 2.5;
dgh[3] = 192.;
dgh[4] = 348.;
gMC->Gsvolu("IHK2", "TUBS", idtmed[264], dgh, 5);
- gMC->Gspos("IHK2", 1, "ITSV", 0., 0., -ztpc-dgh[2], 0, "ONLY");
+ gMC->Gspos("IHK2", 1, "ITSV", 0., 0., -(-ztpc-dgh[2]), idrotm[199], "ONLY");
- }
+// }
// --- DEFINE RAILS BETWEEN THE ITS AND THE TPC
dgh[1] = 8.;
dgh[2] = 190.;
gMC->Gsvolu("IRA1", "BOX ", idtmed[268], dgh, 3);
- gMC->Gspos("IRA1", 1, "ITSV", 53.5, 0., -69.5, 0, "ONLY");
+ gMC->Gspos("IRA1", 1, "ITSV", 53.5, 0., 69.5, idrotm[199], "ONLY");
gMC->Gsvolu("IRA2", "BOX ", idtmed[268], dgh, 3);
- gMC->Gspos("IRA2", 1, "ITSV", -53.5, 0., -69.5, 0, "ONLY");
+ gMC->Gspos("IRA2", 1, "ITSV", -53.5, 0., 69.5, idrotm[199], "ONLY");
dgh[0] = 2.-0.5;// 0.5 was determined in such a way that the aluminum area is 20.9 cm^2
dgh[1] = 8.-0.5;// 0.5 was determined in such a way that the aluminum area is 20.9 cm^2
dgh[1] = 59.;
dgh[2] = 0.6;
gMC->Gsvolu("ICYL", "TUBE", idtmed[210], dgh, 3);
- gMC->Gspos("ICYL", 1, "ALIC", 0., 0., -74.1,idrotm[199], "ONLY");
- gMC->Gspos("ICYL", 2, "ALIC", 0., 0., 74.1, 0, "ONLY");
+ gMC->Gspos("ICYL", 1, "ITSV", 0., 0., -74.1,idrotm[199], "ONLY");
+ gMC->Gspos("ICYL", 2, "ITSV", 0., 0., 74.1, 0, "ONLY");
// --- DEFINE SUPPORTS FOR RAILS ATTACHED TO THE CYLINDERS
dgh[1] = 3.;
dgh[2] = 5.;// 5. comes from the fact that the volume has to be 567.6/2 cm^3
gMC->Gsvolu("ISR1", "TUBE", idtmed[284], dgh, 3);
- gMC->Gspos("ISR1", 1, "ITSV", 53.4292, 10.7053, 79.75, 0, "ONLY");
- gMC->Gspos("ISR1", 2, "ITSV", 53.4292, -10.7053, 79.75, 0, "ONLY");
- gMC->Gspos("ISR1", 3, "ITSV", -53.4292, 10.7053, 79.75, 0, "ONLY");
- gMC->Gspos("ISR1", 4, "ITSV", -53.4292, -10.7053, 79.75, 0, "ONLY");
- gMC->Gspos("ISR1", 5, "ITSV", 53.4292, 10.7053, -79.75, 0, "ONLY");
- gMC->Gspos("ISR1", 6, "ITSV", 53.4292, -10.7053, -79.75, 0, "ONLY");
- gMC->Gspos("ISR1", 7, "ITSV", -53.4292, 10.7053, -79.75, 0, "ONLY");
- gMC->Gspos("ISR1", 8, "ITSV", -53.4292, -10.7053, -79.75, 0, "ONLY");
+ gMC->Gspos("ISR1", 1, "ITSV", 53.4292, 10.7053, -79.75,idrotm[199],"ONLY");
+ gMC->Gspos("ISR1", 2, "ITSV", 53.4292, -10.7053, -79.75,idrotm[199],"ONLY");
+ gMC->Gspos("ISR1", 3, "ITSV", -53.4292, 10.7053, -79.75,idrotm[199],"ONLY");
+ gMC->Gspos("ISR1", 4, "ITSV", -53.4292, -10.7053, -79.75,idrotm[199],"ONLY");
+ gMC->Gspos("ISR1", 5, "ITSV", 53.4292, 10.7053, 79.75,idrotm[199],"ONLY");
+ gMC->Gspos("ISR1", 6, "ITSV", 53.4292, -10.7053, 79.75,idrotm[199],"ONLY");
+ gMC->Gspos("ISR1", 7, "ITSV", -53.4292, 10.7053, 79.75,idrotm[199],"ONLY");
+ gMC->Gspos("ISR1", 8, "ITSV", -53.4292, -10.7053, 79.75,idrotm[199],"ONLY");
// --- DEFINE SUPPORTS FOR RAILS ATTACHED TO THE ABSORBER
dgh[1] = 12.;
dgh[2] = 5.;
gMC->Gsvolu("ISR2", "BOX ", idtmed[210], dgh, 3);
- gMC->Gspos("ISR2", 1, "ITSV", -53.5, 0., -125.5, idrotm[199], "MANY");
+ gMC->Gspos("ISR2", 1, "ITSV", -53.5, 0., 125.5, 0, "ONLY");
gMC->Gsvolu("ISR3", "BOX ", idtmed[210], dgh, 3);
- gMC->Gspos("ISR3", 1, "ITSV", 53.5, 0., -125.5, idrotm[199], "MANY");
+ gMC->Gspos("ISR3", 1, "ITSV", 53.5, 0., 125.5, 0, "ONLY");
dgh[0] = 5.-2.;
dgh[1] = 12.-2.;
dgh[1] = 5.;
dgh[2] = 2.;
gMC->Gsvolu("ISR6", "TUBE", idtmed[210], dgh, 3);
- gMC->Gspos("ISR6", 1, "ITSV", 0., 54., -77., idrotm[199], "MANY");
- gMC->Gspos("ISR6", 2, "ITSV", 0., 54., 77., idrotm[199], "MANY");
- gMC->Gspos("ISR6", 3, "ITSV", 0., -54., 77., idrotm[199], "MANY");
+ gMC->Gspos("ISR6", 1, "ITSV", 0., 54., 77., 0, "ONLY");
+ gMC->Gspos("ISR6", 2, "ITSV", 0., 54., -77., 0, "ONLY");
+ gMC->Gspos("ISR6", 3, "ITSV", 0., -54., -77., 0, "ONLY");
}
-
- // --- Outputs the geometry tree in the EUCLID/CAD format
-
- if (fEuclidOut) {
- gMC->WriteEuclid("ITSgeometry", "ITSV", 1, 5);
- }
-
-
{
if (!gGeoManager) {
AliError("TGeoManager doesn't exist !");
}
while (strcmp(sddName, toTransform->GetName()) == 0);
}
-
-
}
-
}
//______________________________________________________________________
void AliITSv11Hybrid::CreateMaterials(){
// Return:
// none.
- Int_t ifield = gAlice->Field()->Integ();
- Float_t fieldm = gAlice->Field()->Max();
+ Int_t ifield = ((AliMagF*)TGeoGlobalMagField::Instance()->GetField())->Integ();
+ Float_t fieldm = ((AliMagF*)TGeoGlobalMagField::Instance()->GetField())->Max();
Float_t tmaxfd = 0.1; // 1.0; // Degree
Float_t stemax = 1.0; // cm
// rohacell: C9 H13 N1 O2
Float_t arohac[4] = {12.01, 1.01, 14.010, 16.};
Float_t zrohac[4] = { 6., 1., 7., 8.};
- Float_t wrohac[4] = { 9., 13., 1., 2.};
- Float_t drohac = 0.05;
+ Float_t wrohac[4] = { 14., 10., 2., 6.};
+ Float_t drohac = 0.052;
// If he/she means stainless steel (inox) + Aluminium and Zeff=15.3383 then
//
Float_t wAlOxide[2] = {0.4707, 0.5293};
Float_t dAlOxide = 3.97;
+ // Silica for optical fibers: Si O2
+ Float_t aoptfib[2] = { 28.0855, 15.9994};
+ Float_t zoptfib[2] = { 14., 8. };
+ Float_t woptfib[2] = { 1., 2. };
+ Float_t doptfib = 2.55;
+
AliMaterial(1,"SI$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
AliMedium(1,"SI$",1,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi);
// Special media
- AliMaterial(90,"SPD shield$", 12.011, 6., 1.93/10. , 22.1*10., 999);
+ AliMaterial(90,"SPD shield$", 12.011, 6., 1.93 , 22.36, 999);
AliMedium(90,"SPD shield$",90,0,ifield,fieldm,tmaxfdServ,stemaxServ,deemaxServ,epsilServ,stminServ);
// SPD End Ladder (data from Petra Riedler)
*/
AliMaterial(96, "SSD cone$",63.546, 29., 1.15, 1.265, 999);
AliMedium(96,"SSD cone$",96,0,ifield,fieldm,tmaxfdServ,stemaxServ,deemaxServ,epsilServ,stminServ);
+
+ AliMixture(98,"SDD OPTICFIB$",aoptfib,zoptfib,doptfib,-2,woptfib);
+ AliMedium(98,"SDD OPTICFIB$",98,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
}
//______________________________________________________________________
-void AliITSv11Hybrid::InitAliITSgeom(){
+void AliITSv11Hybrid::InitAliITSgeom() const {
// Based on the geometry tree defined in Geant 3.21, this
// routine initilizes the Class AliITSgeom from the Geant 3.21 ITS geometry
// sturture.
Error("InitAliITSgeom", "QQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQq Im I used?");
+ /*
const Int_t knlayers = 6;
const Int_t kndeep = 3;
const AliITSDetector kidet[knlayers]={kSPD,kSPD,kSDD,kSDD,kSSD,kSSD};
} // end for cp0
} // end for lay
return;
+ */
}
+
//______________________________________________________________________
void AliITSv11Hybrid::Init(){
// Initialise the ITS after it has been created.
AliDebug(1,Form("Init: Major version %d Minor version %d",fMajorVersion,
fMinorVersion));
- //
- /* obsolete initialization of AliITSgeom from external "det" file
- if(fRead[0]=='\0') strncpy(fRead,fEuclidGeomDet,60);
- if(fWrite[0]=='\0') strncpy(fWrite,fEuclidGeomDet,60);
- AliITSgeom* geom = new AliITSgeom();
- SetITSgeom(geom);
- if(fGeomDetIn) GetITSgeom()->ReadNewFile(fRead);
- else this->InitAliITSgeom();
- */
UpdateInternalGeometry();
AliITS::Init();
- if(fGeomDetOut) GetITSgeom()->WriteNewFile(fWrite);
- //
fIDMother = gMC->VolId("ITSV"); // ITS Mother Volume ID.
}
+
//______________________________________________________________________
void AliITSv11Hybrid::SetDefaults(){
// sets the default segmentation, response, digit and raw cluster classes
// Return:
// none.
- const Float_t kconv = 1.0e+04; // convert cm to microns
-
if(!fDetTypeSim){
Warning("SetDefaults","Error fDetTypeSim not defined");
return;
}
- AliITSgeomSPD *s0;
- AliITSgeomSDD *s1;
- AliITSgeomSSD *s2;
- Int_t i;
- Float_t bx[256],bz[280];
-
fDetTypeSim->SetDefaults();
- //SPD
- s0 = (AliITSgeomSPD*) GetITSgeom()->GetShape(kSPD);
- // Get shape info. Do it this way for now.
- //AliITSCalibrationSPD* resp0=new AliITSCalibrationSPD();
- AliITSsegmentationSPD* seg0 =
- (AliITSsegmentationSPD*)fDetTypeSim->GetSegmentationModel(0);
- seg0->SetDetSize(s0->GetDx()*2.*kconv, // base this on AliITSgeomSPD
- s0->GetDz()*2.*kconv, // for now.
- s0->GetDy()*2.*kconv); // x,z,y full width in microns.
- seg0->SetNPads(256,160);// Number of Bins in x and z
- for(i=000;i<256;i++) bx[i] = 50.0; // in x all are 50 microns.
- for(i=000;i<160;i++) bz[i] = 425.0; // most are 425 microns except below
- for(i=160;i<280;i++) bz[i] = 0.0; // Outside of detector.
- bz[ 31] = bz[ 32] = 625.0; // first chip boundry
- bz[ 63] = bz[ 64] = 625.0; // first chip boundry
- bz[ 95] = bz[ 96] = 625.0; // first chip boundry
- bz[127] = bz[128] = 625.0; // first chip boundry
- bz[160] = 425.0; // Set so that there is no zero pixel size for fNz.
- seg0->SetBinSize(bx,bz); // Based on AliITSgeomSPD for now.
- SetSegmentationModel(kSPD,seg0);
- // set digit and raw cluster classes to be used
- const char *kData0=(fDetTypeSim->GetCalibrationModel(
- GetITSgeom()->GetStartSPD()))->DataType();
- if (strstr(kData0,"real")) fDetTypeSim->SetDigitClassName(kSPD,
- "AliITSdigit");
- else fDetTypeSim->SetDigitClassName(kSPD,"AliITSdigitSPD");
- // SDD
- s1 = (AliITSgeomSDD*) GetITSgeom()->GetShape(kSDD);
- // Get shape info. Do it this way for now.
-
- //AliITSCalibrationSDD* resp1=new AliITSCalibrationSDD("simulated");
- AliITSsegmentationSDD* seg1 =
- (AliITSsegmentationSDD*)fDetTypeSim->GetSegmentationModel(1);
- seg1->SetDetSize(s1->GetDx()*kconv, // base this on AliITSgeomSDD
- s1->GetDz()*2.*kconv, // for now.
- s1->GetDy()*2.*kconv); // x,z,y full width in microns.
- seg1->SetNPads(256,256);// Use AliITSgeomSDD for now
- SetSegmentationModel(kSDD,seg1);
- const char *kData1=(fDetTypeSim->GetCalibrationModel(
- GetITSgeom()->GetStartSDD()))->DataType();
- AliITSCalibrationSDD* rsp =
- (AliITSCalibrationSDD*)fDetTypeSim->GetCalibrationModel(
- GetITSgeom()->GetStartSDD());
- const char *kopt=rsp->GetZeroSuppOption();
- if((!strstr(kopt,"2D")) && (!strstr(kopt,"1D")) || strstr(kData1,"real") ){
- fDetTypeSim->SetDigitClassName(kSDD,"AliITSdigit");
- } else fDetTypeSim->SetDigitClassName(kSDD,"AliITSdigitSDD");
- // SSD Layer 5
-
- s2 = (AliITSgeomSSD*) GetITSgeom()->GetShape(kSSD);
- // Get shape info. Do it this way for now.
-
-
- //SetCalibrationModel(GetITSgeom()->GetStartSSD(),
- // new AliITSCalibrationSSD("simulated"));
- AliITSsegmentationSSD* seg2 =
- (AliITSsegmentationSSD*)fDetTypeSim->GetSegmentationModel(2);
- seg2->SetDetSize(s2->GetDx()*2.*kconv, // base this on AliITSgeomSSD
- s2->GetDz()*2.*kconv, // for now.
- s2->GetDy()*2.*kconv); // x,z,y full width in microns.
- seg2->SetPadSize(95.,0.); // strip x pitch in microns
- seg2->SetNPads(768,0); // number of strips on each side.
- seg2->SetAngles(0.0075,0.0275); // strip angels rad P and N side.
- seg2->SetAnglesLay5(0.0075,0.0275); // strip angels rad P and N side.
- seg2->SetAnglesLay6(0.0275,0.0075); // strip angels rad P and N side.
- SetSegmentationModel(kSSD,seg2);
- const char *kData2=(fDetTypeSim->GetCalibrationModel(
- GetITSgeom()->GetStartSSD()))->DataType();
- if(strstr(kData2,"real") ) fDetTypeSim->SetDigitClassName(kSSD,
- "AliITSdigit");
- else fDetTypeSim->SetDigitClassName(kSSD,"AliITSdigitSSD");
+
if(fgkNTYPES>3){
Warning("SetDefaults",
"Only the four basic detector types are initialised!");
gMC->Gdhead(1111, "Inner Tracking System Version 1");
gMC->Gdman(17, 6, "MAN");
}
+
//______________________________________________________________________
void AliITSv11Hybrid::StepManager(){
// Called for every step in the ITS, then calles the AliITShit class
if(!(this->IsActive())) return;
if(!(gMC->TrackCharge())) return;
- Int_t copy, id, lay;
- Bool_t sensvol = kFALSE;
- id = gMC->CurrentVolID(copy);
- for(lay=0; lay<fIdN; lay++) if (id == fIdSens[lay]) {
- sensvol=kTRUE;
- break;
- } // end for if
-
- if(sensvol && (gMC->IsTrackExiting())) {
- copy = fTrackReferences->GetEntriesFast();
- TClonesArray &lTR = *fTrackReferences;
- // Fill TrackReference structure with this new TrackReference.
- new(lTR[copy]) AliTrackReference(
- gAlice->GetMCApp()->GetCurrentTrackNumber());
+ Int_t copy, lay = 0;
+ Int_t id = gMC->CurrentVolID(copy);
+
+ Bool_t notSens = kFALSE;
+ while ((lay<fIdN) && (notSens = id != fIdSens[lay])) ++lay;
+ if (notSens) return;
+
+ if(gMC->IsTrackExiting()) {
+ AddTrackReference(gAlice->GetMCApp()->GetCurrentTrackNumber(), AliTrackReference::kITS);
} // if Outer ITS mother Volume
static TLorentzVector position, momentum; // Saves on calls to construtors
static AliITShit hit;// Saves on calls to constructors
- Int_t cpn0, cpn1, cpn2, status, mod;
- //TClonesArray &lhits = *(GetDetTypeSim()->GetHits());
+
TClonesArray &lhits = *(Hits());
+ Int_t cpn0, cpn1, mod, status = 0;
//
// Track status
- status = 0;
if(gMC->IsTrackInside()) status += 1;
if(gMC->IsTrackEntering()) status += 2;
if(gMC->IsTrackExiting()) status += 4;
if(gMC->IsTrackDisappeared()) status += 16;
if(gMC->IsTrackStop()) status += 32;
if(gMC->IsTrackAlive()) status += 64;
+
+ //
+ // retrieve the indices with the volume path
//
switch (lay) {
case 0:case 1: // SPD
- gMC->CurrentVolOffID(2,cpn2);
- gMC->CurrentVolOffID(3,cpn1);
- gMC->CurrentVolOffID(4,cpn0);
+ if (AliITSInitGeometry::SPDIsTGeoNative()) {
+ gMC->CurrentVolOffID(1,copy); // ladder
+ gMC->CurrentVolOffID(3,cpn1); // stave
+ gMC->CurrentVolOffID(5,cpn0); // sector
+ } else {
+ gMC->CurrentVolOffID(2,copy);
+ gMC->CurrentVolOffID(4,cpn1);
+ gMC->CurrentVolOffID(5,cpn0);
+ };
break;
case 2:case 3: // SDD
- cpn2 = 1;
+ copy = 1;
if (AliITSInitGeometry::SDDIsTGeoNative()) {
gMC->CurrentVolOffID(2,cpn1);
gMC->CurrentVolOffID(3,cpn0);
};
break;
case 4:case 5: // SSD
- cpn2 = 1;
+ copy = 1;
+ //if (AliITSInitGeometry::SSDIsTGeoNative()) {
+ // same levels for old and new geom
gMC->CurrentVolOffID(1,cpn1);
gMC->CurrentVolOffID(2,cpn0);
break;
default:
- Error("StepManager","Unknown volume lay=%d",lay+1);
+ AliError(Form("Invalid value: lay= %d . Not an ITS sensitive volume",lay));
return; // not an ITS sensitive volume.
} //
- fInitGeom.DecodeDetector(mod,lay+1,cpn0,cpn1,cpn2);
+
+ fInitGeom.DecodeDetector(mod,lay+1,cpn0,cpn1,copy);
+ // We should not need to pass by the switch !
+ // This is time consuming...
+ // therefore DecodeDetectorv11Hybrid(...) shouldn't be private !
+ // and we should be able to use instead :
+ //fInitGeom.DecodeDetectorv11Hybrid(mod,lay+1,cpn0,cpn1,copy);
//
// Fill hit structure.
return;
}
+
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff