/*
$Log$
+Revision 1.37 2001/05/10 00:12:59 nilsen
+Finished fixing up the default segmentation for the PPR geometry.
+
+Revision 1.36 2001/05/09 01:02:21 nilsen
+Finished fixing SetDefaults for the segmentation of SPD, SDD, and SSD.
+
+Revision 1.35 2001/05/03 08:40:15 barbera
+Volume ITSD slightly modified to be consistent with v5. Some improvement in the printouts. The last commit did not complete successfully.
+
+Revision 1.33 2001/05/01 22:40:42 nilsen
+Partical update of SetDefault.
+
+Revision 1.32 2001/04/22 13:48:09 barbera
+New values of media parameters and thickness of SPD end-ladder electronics as given by Fabio Formenti
+
+Revision 1.31 2001/04/04 07:02:16 barbera
+Position of the cylinders holding rails corrected
+
+Revision 1.30 2001/03/29 22:02:30 barbera
+Some changes to the services due to the new drawings from the engineers.
+
+Revision 1.29 2001/03/29 05:28:56 barbera
+Rails material changed from aluminum to carbon fiber according with the decision of the last Technical Board
+
+Revision 1.28 2001/03/28 06:40:20 barbera
+Central and services mother volumes made consistenf for detailed and coarse geometry. Switch for rails added to the coarse geometries
+
+Revision 1.26 2001/03/23 00:12:23 nilsen
+Set Reading of AliITSgeom data from Geant3 common blocks as the default and
+not a .det file. Removed redundent calls to BuildGeometry.
+
+Revision 1.25 2001/03/20 19:22:51 barbera
+Flags for the rails and the cooling fluid added. Some changes in the volumes of the SSD cones after the meeting with the engineers in Torino.
+
+Revision 1.23 2001/03/13 21:18:44 barbera
+Some misleading comments removed
+
+Revision 1.22 2001/03/13 18:13:30 barbera
+Some mother volumes sligthly modified to eliminate an overlap with the absorber
+
+Revision 1.21 2001/03/13 08:36:23 hristov
+fabsf replaced by TMath::Abs
+
+Revision 1.20 2001/03/13 00:17:41 barbera
+New SDD geometry got grom F. Tosello and checked by the SDD engineers
+
+Revision 1.19 2001/02/28 18:23:13 barbera
+Setters and getters to set/get the detector and chip thickness on SPD layers added
+
+Revision 1.18 2001/02/27 23:18:24 barbera
+Full parameterization of detector and chip thicknesses for layer 1 and layer 2 of SPD as requested by the project leader
+
+Revision 1.17 2001/02/19 22:14:55 nilsen
+Fix for all 4 versions 11, 12, 21, and 22.
+
+Revision 1.16 2001/02/19 20:10:34 barbera
+Set option=2 and thickness=2 as default values --> SetMinorVersion=22
+
+Revision 1.15 2001/02/19 19:44:00 barbera
+Air density parameter corrected
+
Revision 1.14 2001/02/13 16:53:35 nilsen
Fixed a but when trying to use GEANT4. Needed to replace
if(!((TGeant3*)gMC)) with if(!(dynamic_casst<TGeant3*>(gMC)))
#include "AliITSgeomSPD.h"
#include "AliITSgeomSDD.h"
#include "AliITSgeomSSD.h"
+#include "AliITSDetType.h"
+#include "AliITSresponseSPD.h"
+#include "AliITSresponseSDD.h"
+#include "AliITSresponseSSD.h"
+#include "AliITSsegmentationSPD.h"
+#include "AliITSsegmentationSDD.h"
+#include "AliITSsegmentationSSD.h"
+#include "AliITSClusterFinderSPD.h"
+#include "AliITSClusterFinderSDD.h"
+#include "AliITSClusterFinderSSD.h"
ClassImp(AliITSvPPRasymm)
fIdSens = 0;
fEuclidOut = kFALSE; // Don't write Euclide file
fGeomDetOut = kFALSE; // Don't write .det file
- fGeomDetIn = kTRUE; // Read .det file
+ fGeomDetIn = kFALSE; // Don't Read .det file
fMajorVersion = IsVersion();
fMinorVersion = -1;
for(i=0;i<60;i++) fRead[i] = '\0';
fIdSens = new Int_t[fIdN];
for(i=0;i<fIdN;i++) fIdSens[i] = 0;
fMajorVersion = IsVersion();
- fMinorVersion = 21;
+ fMinorVersion = 2;
fEuclidOut = kFALSE; // Don't write Euclide file
fGeomDetOut = kFALSE; // Don't write .det file
- fGeomDetIn = kTRUE; // Read .det file
-
- fEuclidGeometry="$ALICE_ROOT/ITS/ITSgeometry_PPRasymm21.euc";
- strncpy(fEuclidGeomDet,"$ALICE_ROOT/ITS/ITSgeometry_PPRasymm21.det",60);
+ fGeomDetIn = kFALSE; // Don't Read .det file
+ SetThicknessDet1();
+ SetThicknessDet2();
+ SetThicknessChip1();
+ SetThicknessChip2();
+
+ fEuclidGeometry="$ALICE_ROOT/ITS/ITSgeometry_vPPRasymm2.euc";
+ strncpy(fEuclidGeomDet,"$ALICE_ROOT/ITS/ITSgeometry_vPPRasymm2.det",60);
strncpy(fRead,fEuclidGeomDet,60);
strncpy(fWrite,fEuclidGeomDet,60);
}
// Float_t drb[6] = { rl[1]-rl[0],0.2,5.,5.,4.,4. };
- Float_t dits[50], rlim, zmax;
+ Float_t dits[100], rlim, zmax;
// Float_t zpos;
// Float_t pcits[50]
- Float_t xltpc;
+ Float_t ztpc;
Int_t idrotm[1999], i;
- Float_t dgh[50];
+ Float_t dgh[100];
+
+
+ // Define some variables for SPD
+
+ Float_t dits1[3], di101[3], di107[3], di10b[3], di106[3]; // for layer 1
+ Float_t di103[3], di10a[3], di102[3]; // for layer 1
+ Float_t dits2[3], di1d1[3], di1d7[3], di20b[3], di1d6[3]; // for layer 2
+ Float_t di1d3[3], di20a[3], di1d2[3]; // for layer 2
+ Float_t di108[3], di104[3]; // for both layers
+ Float_t ddet1=300.; // total detector thickness on layer 1 (micron)
+ Float_t dchip1=300.; // total chip thickness on layer 1 (micron)
+
+ Float_t ddet2=300.; // total detector thickness on layer 2 (micron)
+ Float_t dchip2=300.; // total chip thickness on layer 2 (micron)
+
+ Float_t dbus=200.; // total bus thickness on both layers (micron)
+
+ ddet1 = GetThicknessDet1();
+ ddet2 = GetThicknessDet2();
+ dchip1 = GetThicknessChip1();
+ dchip2 = GetThicknessChip2();
+
+ if(ddet1 < 100. || ddet1 > 300.) {
+ cout << "ITS - WARNING: the detector thickness for layer 1 is outside the range of [100,300] microns."
+ " The default value of 300 microns will be used." << endl;
+ ddet1=300.;
+ }
+
+ if(ddet2 < 100. || ddet2 > 300.) {
+ cout << "ITS - WARNING: the detector thickness for layer 2 is outside the range of [100,300] microns."
+ " The default value of 300 microns will be used." << endl;
+ ddet2=300.;
+ }
+
+ if(dchip1 < 150. || dchip1 > 300.) {
+ cout << "ITS - WARNING: the chip thickness for layer 1 is outside the range of [150,300] microns."
+ " The default value of 300 microns will be used." << endl;
+ dchip1=300.;
+ }
+
+ if(dchip2 < 150. || dchip2 > 300.) {
+ cout << "ITS - WARNING: the chip thickness for layer 2 is outside the range of [150,300] microns."
+ " The default value of 300 microns will be used." << endl;
+ dchip2=300.;
+ }
- // Default values
+ Int_t rails = 1; // flag for rails (1 --> rails in; 0 --> rails out)
- Int_t thickness=2; // detector thickness = 300 um - chip thickness = 300 um
- Int_t option=2; // option 'b' for det/chip/bus stacking
+ Int_t fluid = 1; // flag for the cooling fluid (1 --> water; 0 --> freon)
+
+ rails = GetRails();
+
+ fluid = GetCoolingFluid();
+
+ if(rails != 0 && rails != 1) {
+ cout << "ITS - WARNING: the switch for rails is not set neither to 0 (rails out) nor to 1 (rails in)."
+ " The default value of 1 (rails in) will be used." << endl;
+
+ }
- // These values are NOT the default ones so leave them commented !
+ if(fluid != 0 && fluid != 1) {
+ cout << "ITS - WARNING: the switch for cooling fluid is not set neither to 0 (freon) nor to 1 (water)."
+ " The default value of 1 (water) will be used." << endl;
+ }
+
+ cout << "ITS: Detector thickness on layer 1 is set to " << ddet1 << " microns." << endl;
+ cout << "ITS: Chip thickness on layer 1 is set to " << dchip1 << " microns." << endl;
+ cout << "ITS: Detector thickness on layer 2 is set to " << ddet2 << " microns." << endl;
+ cout << "ITS: Chip thickness on layer 2 is set to " << dchip2 << " microns." << endl;
+ if(rails == 0 ) {
+ cout << "ITS: Rails are out." << endl;
+ } else {
+ cout << "ITS: Rails are in." << endl;
+ }
+ if(fluid == 0 ) {
+ cout << "ITS: The cooling fluid is freon." << endl;
+ } else {
+ cout << "ITS: The cooling fluid is water." << endl;
+ }
+
+ ddet1 = ddet1*0.0001/2.; // conversion from tot length in um to half in cm
+ ddet2 = ddet2*0.0001/2.; // conversion from tot length in um to half in cm
+ dchip1 = dchip1*0.0001/2.;// conversion from tot length in um to half in cm
+ dchip2 = dchip2*0.0001/2.;// conversion from tot length in um to half in cm
+ dbus = dbus*0.0001/2.; // conversion from tot length in um to half in cm
+
+ Float_t deltax, deltay;
+
+ Int_t thickness = fMinorVersion/10;
+ Int_t option = fMinorVersion - 10*thickness;
+
+
+ // Define some variables for SDD
+
+
+ Float_t sin30, cos30;
+
+ // SDD electronics+services main volumes
+ Float_t I018dits[3], I024dits[3], I047dits[3], I048dits[3];
+
+ // SDD detector ladder
-// Int_t thickness=1; // detector thickness = 100 um - chip thickness = 150 um
-// Int_t option=1; // option 'a' for det/chip/bus stacking
+ Float_t I302dits[3], I402dits[3], I004dits[3], I005dits[3];
+ Float_t Y_SDD_sep = 0.20;
+ Float_t ySDD;
+ Int_t iSDD;
+ Float_t Z_SDD_lay3[6] = {18.55, 10.95, 3.70, -3.70, -11.20, -18.35};
+ Float_t Z_SDD_lay4[8] = {25.75, 18.60, 11.00, 3.70, -3.70, -11.20, -18.45, -26.05};
- thickness = fMinorVersion/10;
- option = fMinorVersion - 10*thickness;
+ // ladder foot and end-ladder (frame and cooling)
+ Float_t I028dits[3], I420dits[3], I421dits[3], I422dits[6], I423dits[3];
+ Float_t I424dits[3], xI424, yI424;
+ Float_t I425dits[3];
+ Int_t indI425;
+ Float_t I029dits[4], I030dits[4], I031dits[3], I032dits[3];
+
+ // SDD ladder frame and cooling
+ Float_t SDD_CoolPipe[3] = {1.7000, -0.5500, 0.0000};
+ Float_t I035dits[3], I037dits[3], I038dits[3];
+ Float_t I039dits[3], xI039, yI039;
+ Float_t I041dits[5];
+
+ // SDD hybrid, chips and capacitors
+ Float_t I050dits[3], xI050, yI050;
+ Float_t I052dits[3], xI052, yI052;
+ Float_t I042dits[3], xI042, yI042;
+ Float_t xI042space = 0.17;
+ Float_t I043dits[3], xI043, yI043;
+ Float_t xI043space = 0.17;
+ Float_t zchip, zChipSpace;
+ Float_t I051dits[3], xI051, yI051, zI051, yI051space, xcap;
+ Int_t ichip, icap;
+
+ // SDD microcables
+ Float_t I044dits[4], xI044, yI044, volI044;
+ Float_t xHV, yHV, zHV, xLV, yLV, zLV;
+ Char_t HVname[5], LVname[5];
+
+
+ // Define media off-set
Int_t *idtmed = fIdtmed->GetArray()-199;
// FIELD CAGE HALF LENGTH
- rlim = 56.;
- zmax = 76.708;
- xltpc = 284.;
+ rlim = 50.;
+ zmax = 74.;
+ ztpc = 284.;
// --- Define ghost volume containing the whole ITS (including services)
// and fill it with air
dgh[0] = 0.;
dgh[1] = 360.;
- dgh[2] = 12.;
- dgh[3] = -xltpc-5.-0.1;
- dgh[4] = 44.9;
+ dgh[2] = 16.;
+ dgh[3] = -ztpc-5.-0.1;
+ dgh[4] = 46;
dgh[5] = 85.;
- dgh[6] = -xltpc;
- dgh[7] = 44.9;
+ dgh[6] = -ztpc;
+ dgh[7] = 46;
dgh[8] = 85.;
- dgh[9] = -xltpc;
- dgh[10] = 44.9;
- dgh[11] = 56.1;
- dgh[12] = -100.7;
- dgh[13] = 44.9;
- dgh[14] = 56.1;
- dgh[15] = -77.2;
- dgh[16] = 44.9;
- dgh[17] = 56.1;
- dgh[18] = -40.;
- dgh[19] = 3.295;
- dgh[20] = 56.1;
- dgh[21] = 40.;
- dgh[22] = 3.295;
- dgh[23] = 56.1;
- dgh[24] = 77.2;
- dgh[25] = 44.9;
- dgh[26] = 56.1;
- dgh[27] = 100.7;
- dgh[28] = 44.9;
- dgh[29] = 56.1;
- dgh[30] = xltpc;
- dgh[31] = 61.5;
- dgh[32] = 61.5+4.;
- dgh[33] = xltpc;
- dgh[34] = 61.5;
- dgh[35] = 85.;
- dgh[36] = xltpc+4.+0.1;
- dgh[37] = 62.4;
- dgh[38] = 85.;
-
- gMC->Gsvolu("ITSV", "PCON", idtmed[205], dgh, 39);
+ dgh[9] = -ztpc;
+ dgh[10] = 46;
+ dgh[11] = rlim+6;
+ dgh[12] = -97.5;
+ dgh[13] = 46;
+ dgh[14] = rlim+6;
+ dgh[15] = -zmax;
+ dgh[16] = 46;
+ dgh[17] = rlim+6;
+ dgh[18] = -48;
+ dgh[19] = 6;
+ dgh[20] = rlim+6;
+ dgh[21] = -28.6;
+ dgh[22] = 6;
+ dgh[23] = rlim+6;
+ dgh[24] = -27.6;
+ dgh[25] = 3.295;
+ dgh[26] = rlim+6;
+ dgh[27] = 27.6;
+ dgh[28] = 3.295;
+ dgh[29] = rlim+6;
+ dgh[30] = 28.6;
+ dgh[31] = 6;
+ dgh[32] = rlim+6;
+ dgh[33] = 48;
+ dgh[34] = 6;
+ dgh[35] = rlim+6;
+ dgh[36] = zmax;
+ dgh[37] = 46;
+ dgh[38] = rlim+6;
+ dgh[39] = 97.5;
+ dgh[40] = 46;
+ dgh[41] = rlim+6;
+ dgh[42] = ztpc;
+ dgh[43] = 62;
+ dgh[44] = 62+4.;
+ dgh[45] = ztpc;
+ dgh[46] = 62;
+ dgh[47] = 85.;
+ dgh[48] = ztpc+4.+0.1;
+ dgh[49] = 62.4;
+ dgh[50] = 85.;
+ gMC->Gsvolu("ITSV", "PCON", idtmed[205], dgh, 51);
+
// --- Place the ghost volume in its mother volume (ALIC) and make it
// invisible
dgh[0] = 0.;
dgh[1] = 360.;
- dgh[2] = 4.;
- dgh[3] = -77.2;
- dgh[4] = 45.;
- dgh[5] = 56.;
- dgh[6] = -40.;
- dgh[7] = 3.3;
- dgh[8] = 56.;
- dgh[9] = 40.;
- dgh[10] = 3.3;
- dgh[11] = 56.;
- dgh[12] = 77.2;
- dgh[13] = 45.;
- dgh[14] = 56.;
- gMC->Gsvolu("ITSD", "PCON", idtmed[205], dgh, 15);
+ dgh[2] = 8.;
+ dgh[3] = -zmax;
+ dgh[4] = 46.;
+ dgh[5] = rlim;
+ dgh[6] = -47.5;
+ dgh[7] = 6.005;
+ dgh[8] = rlim;
+ dgh[9] = -28.5;
+ dgh[10] = 6.005;
+ dgh[11] = rlim;
+ dgh[12] = -27.5;
+ dgh[13] = 3.3;
+ dgh[14] = rlim;
+ dgh[15] = 27.5;
+ dgh[16] = 3.3;
+ dgh[17] = rlim;
+ dgh[18] = 28.5;
+ dgh[19] = 6.005;
+ dgh[20] = rlim;
+ dgh[21] = 47.5;
+ dgh[22] = 6.005;
+ dgh[23] = rlim;
+ dgh[24] = zmax;
+ dgh[25] = 46.;
+ dgh[26] = rlim;
+ gMC->Gsvolu("ITSD", "PCON", idtmed[205], dgh, 27);
// --- Place the ghost volume in its mother volume (ITSV) and make it
// invisible
//gMC->Gsatt("ITSD", "SEEN", 0);
-
// --- Define SPD (option 'a') volumes ----------------------------
// SPD - option 'a'
- // detector thickness = 100 microns
- // chip thickness = 150 microns
// (this is NOT the default)
- if (option == 1 && thickness == 1) {
-
+ if (option == 1) {
+
dits[0] = 3.7;
dits[1] = 7.75;
- dits[2] = 24;
+ dits[2] = 26.1;
gMC->Gsvolu("IT12", "TUBE", idtmed[254], dits, 3);
dits[0] = 3.7;
dits[2] = 24;
dits[3] = 57;
dits[4] = 100;
- gMC->Gsvolu("I12A", "TUBS", idtmed[254], dits, 5);
-
- dits[0] = 0.843;
- dits[1] = 0.025;
- dits[2] = 19.344;
- gMC->Gsvolu("I10A", "BOX ", idtmed[254], dits, 3);
-
- dits[0] = 0.843;
- dits[1] = 0.025;
- dits[2] = 19.344;
- gMC->Gsvolu("I20A", "BOX ", idtmed[254], dits, 3);
+ gMC->Gsvolu("I12A", "TUBS", idtmed[254], dits, 5); // sector
+ di10a[0] = 0.843;
+ di10a[1] = ddet1+dchip1+dbus+0.0025;
+ di10a[2] = 19.344;
+ gMC->Gsvolu("I10A", "BOX ", idtmed[254], di10a, 3); // mother volume
+ // on layer 1
+ di20a[0] = 0.843;
+ di20a[1] = ddet2+dchip2+dbus+0.0025;
+ di20a[2] = 19.344;
+ gMC->Gsvolu("I20A", "BOX ", idtmed[254], di20a, 3); // mother volume
+ // on layer 2
dits[0] = 1.3673;
dits[1] = 0.01;
dits[2] = 24;
dits[4] = 42.883;
gMC->Gsvolu("I124", "TUBS", idtmed[253], dits, 5);
+ di103[0] = 0.793;
+ di103[1] = ddet1+dchip1;
+ di103[2] = 3.536;
+ gMC->Gsvolu("I103", "BOX ", idtmed[254], di103, 3); // contains det and chip
+ // layer 1
dits[0] = 0.793;
- dits[1] = 0.0125;
- dits[2] = 3.536;
- gMC->Gsvolu("I103", "BOX ", idtmed[254], dits, 3);
-
- dits[0] = 0.793;
- dits[1] = 0.015 ;
+ dits[1] = 0.475; //0.685; 0.015
dits[2] = 2.5;
- gMC->Gsvolu("I105", "BOX ", idtmed[201], dits, 3);
-
- dits[0] = 0.843;
- dits[1] = 0.01;
- dits[2] = 14.344;
- gMC->Gsvolu("I104", "BOX ", idtmed[275], dits, 3); // bus
-
+ gMC->Gsvolu("I105", "BOX ", idtmed[290], dits, 3); // end-ladder electr.
+
+ di104[0] = 0.843;
+ di104[1] = dbus;
+ di104[2] = 14.344;
+ gMC->Gsvolu("I104", "BOX ", idtmed[275], di104, 3); // bus for both layers
+
+ di1d3[0] = 0.793;
+ di1d3[1] = ddet2+dchip2;
+ di1d3[2] = 3.536;
+ gMC->Gsvolu("I1D3", "BOX ", idtmed[254], di1d3, 3); // contains det and chip
+ // layer 2
dits[0] = 0.793;
- dits[1] = 0.0125;
- dits[2] = 3.536;
- gMC->Gsvolu("I1D3", "BOX ", idtmed[254], dits, 3);
-
dits[0] = 0.06;
dits[1] = 0.08;
dits[2] = 24;
dits[4] = 180;
gMC->Gsvolu("I114", "TUBS", idtmed[264], dits, 5);
- dits[0] = 0;
- dits[1] = 0.025;
- dits[2] = 24;
- dits[3] = 0;
- dits[4] = 180;
- gMC->Gsvolu("I115", "TUBS", idtmed[211], dits, 5);
-
+ if (fluid == 1) {
+ dits[0] = 0;
+ dits[1] = 0.025;
+ dits[2] = 24;
+ dits[3] = 0;
+ dits[4] = 180;
+ gMC->Gsvolu("I115", "TUBS", idtmed[211], dits, 5); // set water as cooling fluid
+ } else {
+ dits[0] = 0;
+ dits[1] = 0.025;
+ dits[2] = 24;
+ dits[3] = 0;
+ dits[4] = 180;
+ gMC->Gsvolu("I115", "TUBS", idtmed[212], dits, 5); // set freon as cooling fluid
+ }
+
dits[0] = 0.063;
dits[1] = 0.035;
dits[2] = 24;
gMC->Gsvolu("I116", "BOX ", idtmed[264], dits, 3);
- dits[0] = 0.705;
- dits[1] = 0.005;
- dits[2] = 3.536;
- gMC->Gsvolu("I101", "BOX ", idtmed[250], dits, 3);
-
- dits[0] = 0.793;
- dits[1] = 0.0075;
- dits[2] = 0.68;
- gMC->Gsvolu("I102", "BOX ", idtmed[201], dits, 3); // chip
-
- dits[0] = 0.705;
- dits[1] = 0.005;
- dits[2] = 3.536;
- gMC->Gsvolu("I1D1", "BOX ", idtmed[250], dits, 3);
-
- dits[0] = 0.063;
- dits[1] = 0.025;
- dits[2] = 24;
- gMC->Gsvolu("I117", "BOX ", idtmed[211], dits, 3);
-
- dits[0] = 0.64;
- dits[1] = 0.005;
- dits[2] = 3.48;
- gMC->Gsvolu("ITS1", "BOX ", idtmed[200], dits, 3); // detector
-
- dits[0] = 0.64;
- dits[1] = 0.005;
- dits[2] = 3.48;
- gMC->Gsvolu("ITS2", "BOX ", idtmed[200], dits, 3); // detector
+ di102[0] = 0.793;
+ di102[1] = dchip1;
+ di102[2] = 0.68;
+ gMC->Gsvolu("I102", "BOX ", idtmed[201], di102, 3); // chip layer 1
+
+ di1d2[0] = 0.793;
+ di1d2[1] = dchip2;
+ di1d2[2] = 0.68;
+ gMC->Gsvolu("I1D2", "BOX ", idtmed[201], di1d2, 3); // chip layer 2
+
+ di101[0] = 0.705;
+ di101[1] = ddet1;
+ di101[2] = 3.536;
+ gMC->Gsvolu("I101", "BOX ", idtmed[250], di101, 3); // contains detector
+ // layer 1
+ di1d1[0] = 0.705;
+ di1d1[1] = ddet2;
+ di1d1[2] = 3.536;
+ gMC->Gsvolu("I1D1", "BOX ", idtmed[250], di1d1, 3); // contains detector
+ // layer 2
+ if (fluid == 1) {
+ dits[0] = 0.063;
+ dits[1] = 0.025;
+ dits[2] = 24;
+ gMC->Gsvolu("I117", "BOX ", idtmed[211], dits, 3); // set water as cooling fuid
+ } else {
+ dits[0] = 0.063;
+ dits[1] = 0.025;
+ dits[2] = 24;
+ gMC->Gsvolu("I117", "BOX ", idtmed[212], dits, 3); // set freon as cooling fluid
+ }
+
+ dits1[0] = 0.64;
+ dits1[1] = ddet1;
+ dits1[2] = 3.48;
+ gMC->Gsvolu("ITS1", "BOX ", idtmed[200], dits1, 3); // detector layer 1
+
+ dits2[0] = 0.64;
+ dits2[1] = ddet2;
+ dits2[2] = 3.48;
+ gMC->Gsvolu("ITS2", "BOX ", idtmed[200], dits2, 3); // detector layer 2
dits[0] = 3.701;
dits[1] = 7.699;
dits[2] = 0.55;
gMC->Gsvolu("I678", "TUBE", idtmed[263], dits, 3); // was I178 in old geom.
- dits[0] = 0;
- dits[1] = 0.3;
- dits[2] = 1.5;
- gMC->Gsvolu("I677", "TUBE", idtmed[211], dits, 3); // was I177 in old geom.
-
+ if (fluid == 1) {
+ dits[0] = 0;
+ dits[1] = 0.3;
+ dits[2] = 1.5;
+ gMC->Gsvolu("I677", "TUBE", idtmed[211], dits, 3); // set water as cooling fluid
+ // was I177 in old geom.
+ } else {
+ dits[0] = 0;
+ dits[1] = 0.3;
+ dits[2] = 1.5;
+ gMC->Gsvolu("I677", "TUBE", idtmed[212], dits, 3); // set freon as cooling fluid
+ // was I177 in old geom.
+ }
+
dits[0] = 0.07;
dits[1] = 0.125;
dits[2] = 0.3;
gMC->Gsvolu("I675", "TUBE", idtmed[263], dits, 3); // was I175 in old geom.
- dits[0] = 0;
- dits[1] = 0.1;
- dits[2] = 0.8;
- gMC->Gsvolu("I674", "TUBE", idtmed[211], dits, 3); // was I174 in old geom.
-
- dits[0] = 0;
- dits[1] = 0.1;
- dits[2] = 3;
- gMC->Gsvolu("I672", "TUBE", idtmed[211], dits, 3); // was I172 in old geom.
-
- dits[0] = 0;
- dits[1] = 0.0746;
- dits[2] = 0.8;
- gMC->Gsvolu("I670", "TUBE", idtmed[211], dits, 3); // was I170 in old geom.
+ if (fluid == 1) {
+ dits[0] = 0;
+ dits[1] = 0.1;
+ dits[2] = 0.8;
+ gMC->Gsvolu("I674", "TUBE", idtmed[211], dits, 3); // set water as cooling fluid
+ // was I174 in old geom.
+ } else {
+ dits[0] = 0;
+ dits[1] = 0.1;
+ dits[2] = 0.8;
+ gMC->Gsvolu("I674", "TUBE", idtmed[212], dits, 3); // set freon as cooling fluid
+ // was I174 in old geom.
+ }
+
+ if (fluid == 1) {
+ dits[0] = 0;
+ dits[1] = 0.1;
+ dits[2] = 3;
+ gMC->Gsvolu("I672", "TUBE", idtmed[211], dits, 3); // set water as cooling fluid
+ // was I172 in old geom.
+ } else {
+ dits[0] = 0;
+ dits[1] = 0.1;
+ dits[2] = 3;
+ gMC->Gsvolu("I672", "TUBE", idtmed[212], dits, 3); // set freon as cooling fluid
+ // was I172 in old geom.
+ }
+
+ if (fluid == 1) {
+ dits[0] = 0;
+ dits[1] = 0.0746;
+ dits[2] = 0.8;
+ gMC->Gsvolu("I670", "TUBE", idtmed[211], dits, 3); // set water as cooling fluid
+ // was I170 in old geom.
+ } else {
+ dits[0] = 0;
+ dits[1] = 0.0746;
+ dits[2] = 0.8;
+ gMC->Gsvolu("I670", "TUBE", idtmed[212], dits, 3); // set freon as cooling fluid
+ // was I170 in old geom.
+ }
+
+ if (fluid == 1) {
+ dits[0] = 3.7;
+ dits[1] = 5.4;
+ dits[2] = 0.35;
+ dits[3] = 2;
+ dits[4] = 36;
+ gMC->Gsvolu("I668", "TUBS", idtmed[211], dits, 5); // set water as cooling fluid
+ // was I168 in old geom.
+ } else {
+ dits[0] = 3.7;
+ dits[1] = 5.4;
+ dits[2] = 0.35;
+ dits[3] = 2;
+ dits[4] = 36;
+ gMC->Gsvolu("I668", "TUBS", idtmed[212], dits, 5); // set freon as cooling fluid
+ // was I168 in old geom.
+ }
- dits[0] = 3.7;
- dits[1] = 5.4;
- dits[2] = 0.35;
- dits[3] = 2;
- dits[4] = 36;
- gMC->Gsvolu("I668", "TUBS", idtmed[211], dits, 5); // was I168 in old geom.
}
-
// --- Define SPD (option 'b') volumes ----------------------------
// SPD - option 'b'
- // detector thickness = 100 microns
- // chip thickness = 150 microns
- // (this is NOT the default)
-
- if (option == 2 && thickness == 1) {
+ // (this is the default)
+ if (option == 2) {
+
dits[0] = 3.7;
dits[1] = 7.75;
- dits[2] = 24;
+ dits[2] = 26.1;
gMC->Gsvolu("IT12", "TUBE", idtmed[254], dits, 3);
dits[0] = 3.7;
dits[2] = 24;
dits[3] = 57;
dits[4] = 100;
- gMC->Gsvolu("I12B", "TUBS", idtmed[254], dits, 5);
+ gMC->Gsvolu("I12B", "TUBS", idtmed[254], dits, 5); // sector
- dits[0] = 0.843;
- dits[1] = 0.025;
- dits[2] = 19.344;
- gMC->Gsvolu("I10B", "BOX ", idtmed[254], dits, 3);
+ di10b[0] = 0.843;
+ di10b[1] = ddet1+dchip1+dbus+0.0025;
+ di10b[2] = 19.344;
+ gMC->Gsvolu("I10B", "BOX ", idtmed[254], di10b, 3); // mother volume
+ // on layer 1
- dits[0] = 0.843;
- dits[1] = 0.025;
- dits[2] = 19.344;
- gMC->Gsvolu("I20B", "BOX ", idtmed[254], dits, 3);
+ di20b[0] = 0.843;
+ di20b[1] = ddet2+dchip2+dbus+0.0025;
+ di20b[2] = 19.344;
+ gMC->Gsvolu("I20B", "BOX ", idtmed[254], di20b, 3); // mother volume
+ // layer 2
dits[0] = 1.3673;
dits[1] = 0.01;
gMC->Gsvolu("I124", "TUBS", idtmed[253], dits, 5);
dits[0] = 0.793;
- dits[1] = 0.015 ;
+ dits[1] = 0.475 ; //0.685; 0.015
dits[2] = 2.5;
- gMC->Gsvolu("I105", "BOX ", idtmed[201], dits, 3);
-
- dits[0] = 0.793;
- dits[1] = 0.0125;
- dits[2] = 3.536;
- gMC->Gsvolu("I107", "BOX ", idtmed[254], dits, 3);
+ gMC->Gsvolu("I105", "BOX ", idtmed[290], dits, 3);
+ di107[0] = 0.793;
+ di107[1] = ddet1+dchip1;
+ di107[2] = 3.536;
+ gMC->Gsvolu("I107", "BOX ", idtmed[254], di107, 3); // contains det and chip
+ // layer 1
dits[0] = 0.705;
dits[1] = 0.01;
dits[2] = 2.5;
gMC->Gsvolu("I109", "BOX ", idtmed[275], dits, 3);
- dits[0] = 0.705;
- dits[1] = 0.01;
- dits[2] = 14.344;
- gMC->Gsvolu("I108", "BOX ", idtmed[275], dits, 3); // bus
-
- dits[0] = 0.7975;
- dits[1] = 0.0125;
- dits[2] = 3.536;
- gMC->Gsvolu("I1D7", "BOX ", idtmed[254], dits, 3);
+ di108[0] = 0.705;
+ di108[1] = dbus;
+ di108[2] = 14.344;
+ gMC->Gsvolu("I108", "BOX ", idtmed[275], di108, 3); // bus for both layers
+ di1d7[0] = 0.7975;
+ di1d7[1] = ddet2+dchip2;
+ di1d7[2] = 3.536;
+ gMC->Gsvolu("I1D7", "BOX ", idtmed[254], di1d7, 3); // contains det and chip
+ // layer 2
dits[0] = 0.06;
dits[1] = 0.08;
dits[2] = 24;
dits[4] = 180;
gMC->Gsvolu("I114", "TUBS", idtmed[264], dits, 5);
- dits[0] = 0;
- dits[1] = 0.025;
- dits[2] = 24;
- dits[3] = 0;
- dits[4] = 180;
- gMC->Gsvolu("I115", "TUBS", idtmed[211], dits, 5);
-
+ if (fluid == 1) {
+ dits[0] = 0;
+ dits[1] = 0.025;
+ dits[2] = 24;
+ dits[3] = 0;
+ dits[4] = 180;
+ gMC->Gsvolu("I115", "TUBS", idtmed[211], dits, 5); // set water as cooling fluid
+ } else {
+ dits[0] = 0;
+ dits[1] = 0.025;
+ dits[2] = 24;
+ dits[3] = 0;
+ dits[4] = 180;
+ gMC->Gsvolu("I115", "TUBS", idtmed[212], dits, 5); // set freon as cooling fluid
+ }
+
dits[0] = 0.063;
dits[1] = 0.035;
dits[2] = 24;
gMC->Gsvolu("I116", "BOX ", idtmed[264], dits, 3);
- dits[0] = 0.7975;
- dits[1] = 0.0075;
- dits[2] = 0.68;
- gMC->Gsvolu("I106", "BOX ", idtmed[203], dits, 3); // chip
-
- dits[0] = 0.705;
- dits[1] = 0.005;
- dits[2] = 3.536;
- gMC->Gsvolu("I101", "BOX ", idtmed[250], dits, 3);
-
- dits[0] = 0.705;
- dits[1] = 0.005;
- dits[2] = 3.536;
- gMC->Gsvolu("I1D1", "BOX ", idtmed[250], dits, 3);
-
- dits[0] = 0.063;
- dits[1] = 0.025;
- dits[2] = 24;
- gMC->Gsvolu("I117", "BOX ", idtmed[211], dits, 3);
-
- dits[0] = 0.64;
- dits[1] = 0.005;
- dits[2] = 3.48;
- gMC->Gsvolu("ITS1", "BOX ", idtmed[200], dits, 3); // detector
-
- dits[0] = 0.64;
- dits[1] = 0.005;
- dits[2] = 3.48;
- gMC->Gsvolu("ITS2", "BOX ", idtmed[200], dits, 3); // detector
+ di106[0] = 0.7975;
+ di106[1] = dchip1;
+ di106[2] = 0.68;
+ gMC->Gsvolu("I106", "BOX ", idtmed[201], di106, 3); // chip layer 1
+
+ di1d6[0] = 0.7975;
+ di1d6[1] = dchip2;
+ di1d6[2] = 0.68;
+ gMC->Gsvolu("I1D6", "BOX ", idtmed[201], di1d6, 3); // chip layer 2
+
+ di101[0] = 0.705;
+ di101[1] = ddet1;
+ di101[2] = 3.536;
+ gMC->Gsvolu("I101", "BOX ", idtmed[250], di101, 3); // contains detector
+ // layer 1
+ di1d1[0] = 0.705;
+ di1d1[1] = ddet2;
+ di1d1[2] = 3.536;
+ gMC->Gsvolu("I1D1", "BOX ", idtmed[250], di1d1, 3); // contains detector
+ // layer 2
+
+ if (fluid == 1) {
+ dits[0] = 0.063;
+ dits[1] = 0.025;
+ dits[2] = 24;
+ gMC->Gsvolu("I117", "BOX ", idtmed[211], dits, 3); // set water as cooling fluid
+ } else {
+ dits[0] = 0.063;
+ dits[1] = 0.025;
+ dits[2] = 24;
+ gMC->Gsvolu("I117", "BOX ", idtmed[212], dits, 3); // set freon as cooling fluid
+ }
+
+ dits1[0] = 0.64;
+ dits1[1] = ddet1;
+ dits1[2] = 3.48;
+ gMC->Gsvolu("ITS1", "BOX ", idtmed[200], dits1, 3); // detector layer 1
+
+ dits2[0] = 0.64;
+ dits2[1] = ddet2;
+ dits2[2] = 3.48;
+ gMC->Gsvolu("ITS2", "BOX ", idtmed[200], dits2, 3); // detector layer 2
dits[0] = 3.701;
dits[1] = 7.699;
dits[2] = 0.55;
gMC->Gsvolu("I678", "TUBE", idtmed[263], dits, 3); // was I178 in old geom.
- dits[0] = 0;
- dits[1] = 0.3;
- dits[2] = 1.5;
- gMC->Gsvolu("I677", "TUBE", idtmed[211], dits, 3); // was I177 in old geom.
+ if (fluid == 1) {
+ dits[0] = 0;
+ dits[1] = 0.3;
+ dits[2] = 1.5;
+ gMC->Gsvolu("I677", "TUBE", idtmed[211], dits, 3); //set water as cooling fluid
+ // was I177 in old geom.
+ } else {
+ dits[0] = 0;
+ dits[1] = 0.3;
+ dits[2] = 1.5;
+ gMC->Gsvolu("I677", "TUBE", idtmed[212], dits, 3); //set freon as cooling fluid
+ // was I177 in old geom.
+ }
dits[0] = 0.07;
dits[1] = 0.125;
dits[2] = 0.3;
gMC->Gsvolu("I675", "TUBE", idtmed[263], dits, 3); // was I175 in old geom.
- dits[0] = 0;
- dits[1] = 0.1;
- dits[2] = 0.8;
- gMC->Gsvolu("I674", "TUBE", idtmed[211], dits, 3); // was I174 in old geom.
+ if (fluid == 1) {
+ dits[0] = 0;
+ dits[1] = 0.1;
+ dits[2] = 0.8;
+ gMC->Gsvolu("I674", "TUBE", idtmed[211], dits, 3); //set water as cooling fluid
+ // was I174 in old geom.
+ } else {
+ dits[0] = 0;
+ dits[1] = 0.1;
+ dits[2] = 0.8;
+ gMC->Gsvolu("I674", "TUBE", idtmed[212], dits, 3); //set freon as cooling fluid
+ // was I174 in old geom.
+ }
+
+ if (fluid == 1) {
+ dits[0] = 0;
+ dits[1] = 0.1;
+ dits[2] = 3;
+ gMC->Gsvolu("I672", "TUBE", idtmed[211], dits, 3); //set water as cooling fluid
+ // was I172 in old geom.
+ } else {
+ dits[0] = 0;
+ dits[1] = 0.1;
+ dits[2] = 3;
+ gMC->Gsvolu("I672", "TUBE", idtmed[212], dits, 3); //set freon as cooling fluid
+ // was I172 in old geom.
+ }
+
+ if (fluid == 1) {
+ dits[0] = 0;
+ dits[1] = 0.0746;
+ dits[2] = 0.8;
+ gMC->Gsvolu("I670", "TUBE", idtmed[211], dits, 3); //set water as cooling fluid
+ // was I170 in old geom.
+ } else {
+ dits[0] = 0;
+ dits[1] = 0.0746;
+ dits[2] = 0.8;
+ gMC->Gsvolu("I670", "TUBE", idtmed[212], dits, 3); //set freon as cooling fluid
+ // was I170 in old geom.
+ }
+
+ if (fluid == 1) {
+ dits[0] = 3.7;
+ dits[1] = 5.4;
+ dits[2] = 0.35;
+ dits[3] = 2;
+ dits[4] = 36;
+ gMC->Gsvolu("I668", "TUBS", idtmed[211], dits, 5); //set water as cooling fluid
+ // was I168 in old geom.
+ } else {
+ dits[0] = 3.7;
+ dits[1] = 5.4;
+ dits[2] = 0.35;
+ dits[3] = 2;
+ dits[4] = 36;
+ gMC->Gsvolu("I668", "TUBS", idtmed[212], dits, 5); //set freon as cooling fluid
+ // was I168 in old geom.
+ }
+
- dits[0] = 0;
- dits[1] = 0.1;
- dits[2] = 3;
- gMC->Gsvolu("I672", "TUBE", idtmed[211], dits, 3); // was I172 in old geom.
+ }
- dits[0] = 0;
- dits[1] = 0.0746;
- dits[2] = 0.8;
- gMC->Gsvolu("I670", "TUBE", idtmed[211], dits, 3); // was I170 in old geom.
+ // --- Define SDD volumes ------------------------------------------
- dits[0] = 3.7;
- dits[1] = 5.4;
- dits[2] = 0.35;
- dits[3] = 2;
- dits[4] = 36;
- gMC->Gsvolu("I668", "TUBS", idtmed[211], dits, 5); // was I168 in old geom.
+
+ cos30 = cos(30.*3.14159/180.);
+ sin30 = sin(30.*3.14159/180.);
+
+
+ dits[0] = 0;
+ dits[1] = 360;
+ dits[2] = 6;
+ dits[3] = -34.6;
+ dits[4] = 23.49;
+ dits[5] = 28;
+ dits[6] = -23.65;
+ dits[7] = 23.49;
+ dits[8] = 28;
+ dits[9] = -23.65;
+ dits[10] = 14.59;
+ dits[11] = 28;
+ dits[12] = 23.65;
+ dits[13] = 14.59;
+ dits[14] = 28;
+ dits[15] = 23.65;
+ dits[16] = 23.49;
+ dits[17] = 28;
+ dits[18] = 34.6;
+ dits[19] = 23.49;
+ dits[20] = 28;
+ gMC->Gsvolu("IT34", "PCON", idtmed[209], dits, 21);
+ // block of the SDD electronics and related ladder frame
+ I018dits[0] = 3.2;
+ I018dits[1] = 2;
+ I018dits[2] = 3.65;
+ gMC->Gsvolu("I018", "BOX ", idtmed[209], I018dits, 3);
+
+ // block of the SDD end ladder
+ I024dits[0] = 3.2;
+ I024dits[1] = 2;
+ I024dits[2] = 2.725;
+ gMC->Gsvolu("I024", "BOX ", idtmed[209], I024dits, 3);
+
+ // ladder frame of layer 3 - F.T. March,7-2001
+ I047dits[0] = I018dits[0];
+ I047dits[1] = I018dits[1];
+ I047dits[2] = 6*I018dits[2] + 2*I024dits[2];
+ gMC->Gsvolu("I047", "BOX ", idtmed[209], I047dits, 3);
+
+ // ladder frame of layer 4 - F.T. March,7-2001
+ I048dits[0] = I018dits[0];
+ I048dits[1] = I018dits[1];
+ I048dits[2] = 8*I018dits[2] + 2*I024dits[2];
+ gMC->Gsvolu("I048", "BOX ", idtmed[209], I048dits, 3);
+
+
+ // global SDD volume (sensitive + insensitive)
+ I302dits[0] = 3.6250;
+ I302dits[1] = 0.0150;
+ I302dits[2] = 4.3794;
+ gMC->Gsvolu("I302", "BOX ", idtmed[278], I302dits, 3);
+
+ // Like for I302 - F.T. March,7-2001
+ I402dits[0] = 3.6250;
+ I402dits[1] = 0.0150;
+ I402dits[2] = 4.3794;
+ gMC->Gsvolu("I402", "BOX ", idtmed[278], I402dits, 3);
+
+ // SDD ladder of layer 3 - F.T. March,7-2001
+ I004dits[0] = I302dits[0]+0.005;
+ I004dits[1] = 2*I302dits[1]+Y_SDD_sep/2.;
+ I004dits[2] = TMath::Abs(Z_SDD_lay3[0]);
+ if (I004dits[2] < TMath::Abs(Z_SDD_lay3[5])) {
+ I004dits[2] = TMath::Abs(Z_SDD_lay3[5]);
+ }
+ I004dits[2] = I004dits[2] + I302dits[2];
+ gMC->Gsvolu("I004", "BOX ", idtmed[209], I004dits, 3);
+
+ // SDD ladder of layer 4 - F.T. March,7-2001
+ I005dits[0] = I402dits[0]+0.005;
+ I005dits[1] = 2*I402dits[1]+Y_SDD_sep/2.;
+ I005dits[2] = TMath::Abs(Z_SDD_lay4[0]);
+ if (I005dits[2] < TMath::Abs(Z_SDD_lay4[7])) {
+ I005dits[2] = TMath::Abs(Z_SDD_lay4[7]);
}
+ I005dits[2] = I005dits[2] + I402dits[2];
+ gMC->Gsvolu("I005", "BOX ", idtmed[209], I005dits, 3);
+
+
+ // -- block of the SDD ladder foot and end ladder
+
+ // ladder foot mother volume
+ I028dits[0] = 3.0000;
+ I028dits[1] = 0.4000;
+ I028dits[2] = 0.9000;
+ gMC->Gsvolu("I028", "BOX ", idtmed[224], I028dits, 3);
+
+ // positioning-box #1 at SDD end-ladder - F.T. March,7-2001
+ I420dits[0] = 0.4500;
+ I420dits[1] = 0.4000;
+ I420dits[2] = 0.4500;
+ gMC->Gsvolu("I420", "BOX ", idtmed[264], I420dits, 3);
+
+ // positioning-box #2 at SDD end-ladder - F.T. March,7-2001
+ I421dits[0] = 0.;
+ I421dits[1] = 0.25;
+ I421dits[2] = I420dits[1];
+ gMC->Gsvolu("I421", "TUBE", idtmed[209], I421dits, 3);
+
+ // reference ruby-sphere at SDD end-ladder - F.T. March,7-2001
+ I422dits[0] = 0.0000;
+ I422dits[1] = 0.2000;
+ I422dits[2] = 0.0000;
+ I422dits[3] = 180.00;
+ I422dits[4] = 0.0000;
+ I422dits[5] = 360.00;
+ gMC->Gsvolu("I422", "SPHE", idtmed[277], I422dits, 6);
+
+ // support for ruby-sphere (I422) - F.T. March,7-2001
+ I423dits[0] = 0.0000;
+ I423dits[1] = 0.1000;
+ I423dits[2] = (I420dits[1]-I422dits[1])/2.;
+ gMC->Gsvolu("I423", "TUBE", idtmed[264], I423dits, 3);
+
+ // passage for HV microcables - F.T. March,7-2001
+ I424dits[0] = 1.5000;
+ I424dits[1] = 0.1500;
+ I424dits[2] = I421dits[2];
+ gMC->Gsvolu("I424", "BOX ", idtmed[209], I424dits, 3);
+
+ // HV microcables segment at the end ladder - F.T. March,7-2001
+ I425dits[0] = 1.350000;
+ I425dits[1] = 0.015250;
+ I425dits[2] = I024dits[2];
+ gMC->Gsvolu("I425", "BOX ", idtmed[279], I425dits, 3);
+
+ // lower edge of SDD ladder frame at end-ladder - part 1
+ dits[0] = 0.2;
+ dits[1] = 0.1815;
+ dits[2] = I024dits[2];
+ dits[3] = 0.015;
+ gMC->Gsvolu("I025", "TRD1", idtmed[208], dits, 4);
- // --- Define SPD (option 'a') volumes ----------------------------
-
- // SPD - option 'a'
- // detector thickness = 300 microns
- // chip thickness = 300 microns
- // (this is NOT the default)
+ // lower edge of SDD ladder frame at end-ladder - part 2
+ dits[0] = 0.183;
+ dits[1] = 0.165;
+ dits[2] = I024dits[2];
+ dits[3] = 0.015;
+ gMC->Gsvolu("I026", "TRD1", idtmed[208], dits, 4);
- if (option == 1 && thickness == 2) {
+ // new: for the 1st top rod of the structure
+ // at the end-ladder - F.T. March,7-2001
+ I029dits[0] = 0.2;
+ I029dits[1] = 0.1815;
+ I029dits[2] = 1.0100;
+ I029dits[3] = 0.015;
+ gMC->Gsvolu("I029", "TRD1", idtmed[208], I029dits, 4);
+
+ // new: for the 2nd top rod of the structure
+ // at the end-ladder - F.T. March,7-2001
+ I030dits[0] = 0.1830;
+ I030dits[1] = 0.1650;
+ I030dits[2] = 1.0100;
+ I030dits[3] = 0.0150;
+ gMC->Gsvolu("I030", "TRD1", idtmed[208], I030dits, 4);
+
+ // inox cooling tubes for the end ladder - F.T. March,7-2001
+ I031dits[0] = 0.093;
+ I031dits[1] = 0.1;
+ I031dits[2] = I024dits[2];
+ gMC->Gsvolu("I031", "TUBE", idtmed[264], I031dits, 3);
+
+ if (fluid == 1) {
+ // cooling water for the end ladder - F.T. March,7-2001
+ I032dits[0] = 0;
+ I032dits[1] = I031dits[0];
+ I032dits[2] = I024dits[2];
+ gMC->Gsvolu("I032", "TUBE", idtmed[211], I032dits, 3);
+ } else {
+ // cooling freon for the end ladder - R.B. March,21-2001
+ I032dits[0] = 0;
+ I032dits[1] = I031dits[0];
+ I032dits[2] = I024dits[2];
+ gMC->Gsvolu("I032", "TUBE", idtmed[212], I032dits, 3);
+ }
- dits[0] = 3.7;
- dits[1] = 7.75;
- dits[2] = 24;
- gMC->Gsvolu("IT12", "TUBE", idtmed[254], dits, 3);
+ // -- block of the SDD ladder frame holding the electronics
- dits[0] = 3.7;
- dits[1] = 7.7;
- dits[2] = 24;
- dits[3] = 57;
- dits[4] = 100;
- gMC->Gsvolu("I12A", "TUBS", idtmed[254], dits, 5); // sector
+ // edge of the ladder frame - part 1
+ dits[0] = 0.2;
+ dits[1] = 0.182;
+ dits[2] = 3.65;
+ dits[3] = 0.015;
+ gMC->Gsvolu("I019", "TRD1", idtmed[208], dits, 4);
- dits[0] = 0.843;
- dits[1] = 0.0425;
- dits[2] = 19.344;
- gMC->Gsvolu("I10A", "BOX ", idtmed[254], dits, 3); // lower ladder
+ // edge of the ladder frame - part 2
+ dits[0] = 0.183;
+ dits[1] = 0.165;
+ dits[2] = 3.65;
+ dits[3] = 0.015;
+ gMC->Gsvolu("I020", "TRD1", idtmed[208], dits, 4);
- dits[0] = 0.843;
- dits[1] = 0.0425;
- dits[2] = 19.344;
- gMC->Gsvolu("I20A", "BOX ", idtmed[254], dits, 3); // upper ladder
+ // inclined segments of the ladder frame
+ dits[0] = 2.23;
+ dits[1] = 2.1;
+ dits[2] = 0.05;
+ dits[3] = 0.03;
+ gMC->Gsvolu("I021", "TRD1", idtmed[208], dits, 4);
- dits[0] = 1.3673;
- dits[1] = 0.01;
- dits[2] = 24;
- gMC->Gsvolu("I123", "BOX ", idtmed[253], dits, 3);
+ // horiz.segments of the ladders, normal to ladder edges
+ dits[0] = 2.1;
+ dits[1] = 2;
+ dits[2] = 0.06;
+ dits[3] = 0.04;
+ gMC->Gsvolu("I022", "TRD1", idtmed[208], dits, 4);
- dits[0] = 0.06;
- dits[1] = 0.08;
- dits[2] = 24;
- dits[3] = -36.79;
- dits[4] = 21.834;
- gMC->Gsvolu("I121", "TUBS", idtmed[253], dits, 5);
+ // horiz.segments of the ladders, at 45 deg. to ladder edges
+ dits[0] = 2.615;
+ dits[1] = 2.465;
+ dits[2] = 0.06;
+ dits[3] = 0.04;
+ gMC->Gsvolu("I023", "TRD1", idtmed[208], dits, 4);
- dits[0] = 0.1253;
- dits[1] = 0.01;
- dits[2] = 24;
- gMC->Gsvolu("I122", "BOX ", idtmed[253], dits, 3);
+ // supports of the ceramic pins holding the detectors
+ dits[0] = 0.3;
+ dits[1] = 0.05;
+ dits[2] = 0.15;
+ gMC->Gsvolu("I033", "BOX ", idtmed[208], dits, 3);
- dits[0] = 0.04;
- dits[1] = 0.06 ;
- dits[2] = 24;
- dits[3] = 126.79;
- dits[4] = 270;
- gMC->Gsvolu("I120", "TUBS", idtmed[253], dits, 5);
+ // ceramic pins holding the detectors
+ dits[0] = 0;
+ dits[1] = 0.05;
+ dits[2] = 0.225;
+ gMC->Gsvolu("I034", "TUBE", idtmed[277], dits, 3);
- dits[0] = 0.1134;
- dits[1] = 0.01;
- dits[2] = 24;
- gMC->Gsvolu("I144", "BOX ", idtmed[253], dits, 3);
+ // holders of cooling tubes
+ I035dits[0] = 0.1;
+ I035dits[1] = 0.15;
+ I035dits[2] = 0.2;
+ gMC->Gsvolu("I035", "TUBE", idtmed[208], I035dits, 3);
- dits[0] = 0.25;
- dits[1] = 0.06;
- dits[2] = 24;
- gMC->Gsvolu("I113", "BOX ", idtmed[254], dits, 3);
+ // top holders of microcables
+ dits[0] = 0.2;
+ dits[1] = 0.01;
+ dits[2] = 0.05;
+ gMC->Gsvolu("I036", "BOX ", idtmed[208], dits, 3);
- dits[0] = 0.077;
- dits[1] = 0.01;
- dits[2] = 24;
- gMC->Gsvolu("I143", "BOX ", idtmed[253], dits, 3);
+ // inox cooling tubes - F.T. March,7-2001
+ I037dits[0] = 0.093;
+ I037dits[1] = 0.1;
+ I037dits[2] = I018dits[2];
+ gMC->Gsvolu("I037", "TUBE", idtmed[264], I037dits, 3);
+
+ if (fluid == 1) {
+ // cooling water - F.T. March,7-2001
+ I038dits[0] = 0;
+ I038dits[1] = I037dits[0];
+ I038dits[2] = I018dits[2];
+ gMC->Gsvolu("I038", "TUBE", idtmed[211], I038dits, 3);
+ } else {
+ // cooling freon - R.B. March,21-2001
+ I038dits[0] = 0;
+ I038dits[1] = I037dits[0];
+ I038dits[2] = I018dits[2];
+ gMC->Gsvolu("I038", "TUBE", idtmed[212], I038dits, 3);
+ }
+ // -- block of the SDD electronics (heat bridge, chips, hybrid, anode microcable)
- dits[0] = 0.04;
- dits[1] = 0.06;
- dits[2] = 24;
- dits[3] = 0;
- dits[4] = 90;
- gMC->Gsvolu("I142", "TUBS", idtmed[253], dits, 5);
-
- dits[0] = 0.0695;
- dits[1] = 0.01;
- dits[2] = 24;
- gMC->Gsvolu("I141", "BOX ", idtmed[253], dits, 3);
-
- dits[0] = 0.06;
- dits[1] = 0.08;
- dits[2] = 24;
- dits[3] = 0;
- dits[4] = 108;
- gMC->Gsvolu("I140", "TUBS", idtmed[253], dits, 5);
-
- dits[0] = 0.1835;
- dits[1] = 0.01;
- dits[2] = 24;
- gMC->Gsvolu("I139", "BOX ", idtmed[253], dits, 3);
-
- dits[0] = 0.1894 ;
- dits[1] = 0.01;
- dits[2] = 24;
- gMC->Gsvolu("I138", "BOX ", idtmed[253], dits, 3);
-
- dits[0] = 0.04;
- dits[1] = 0.06;
- dits[2] = 24;
- dits[3] = 0;
- dits[4] = 75.261;
- gMC->Gsvolu("I137", "TUBS", idtmed[253], dits, 5);
-
- dits[0] = 1.3401;
- dits[1] = 0.01;
- dits[2] = 24;
- gMC->Gsvolu("I136", "BOX ", idtmed[253], dits, 3);
-
- dits[0] = 0.05;
- dits[1] = 0.07;
- dits[2] = 24;
- dits[3] = 0;
- dits[4] = 72.739;
- gMC->Gsvolu("I135", "TUBS", idtmed[253], dits, 5);
-
- dits[0] = 0.1193;
- dits[1] = 0.01;
- dits[2] = 24;
- gMC->Gsvolu("I134", "BOX ", idtmed[253], dits, 3);
-
- dits[0] = 0.163;
- dits[1] = 0.01;
- dits[2] = 24;
- gMC->Gsvolu("I133", "BOX ", idtmed[253], dits, 3);
-
- dits[0] = 0.04;
- dits[1] = 0.06;
- dits[2] = 24;
- dits[3] = 0;
- dits[4] = 157.633;
- gMC->Gsvolu("I132", "TUBS", idtmed[253], dits, 5);
-
- dits[0] = 0.2497;
- dits[1] = 0.01;
- dits[2] = 24;
- gMC->Gsvolu("I131", "BOX ", idtmed[253], dits, 3);
-
- dits[0] = 0.06;
- dits[1] = 0.08;
- dits[2] = 24;
- dits[3] = 0;
- dits[4] = 148.633;
- gMC->Gsvolu("I130", "TUBS", idtmed[253], dits, 5);
-
- dits[0] = 0.292;
- dits[1] = 0.01;
- dits[2] = 24;
- gMC->Gsvolu("I129", "BOX ", idtmed[253], dits, 3);
-
- dits[0] = 0.163;
- dits[1] = 0.01;
- dits[2] = 24;
- gMC->Gsvolu("I128", "BOX ", idtmed[253], dits, 3);
-
- dits[0] = 0.04;
- dits[1] = 0.06;
- dits[2] = 24;
- dits[3] = 0;
- dits[4] = 161.297;
- gMC->Gsvolu("I126", "TUBS", idtmed[253], dits, 5);
-
- dits[0] = 0.2433;
- dits[1] = 0.01;
- dits[2] = 24;
- gMC->Gsvolu("I125", "BOX ", idtmed[253], dits, 3);
-
- dits[0] = 0.06;
- dits[1] = 0.08;
- dits[2] = 24;
- dits[3] = 0;
- dits[4] = 42.883;
- gMC->Gsvolu("I124", "TUBS", idtmed[253], dits, 5);
-
- dits[0] = 0.793;
- dits[1] = 0.03;
- dits[2] = 3.536;
- gMC->Gsvolu("I103", "BOX ", idtmed[254], dits, 3); // contains det and chip
-
- dits[0] = 0.793;
- dits[1] = 0.015;
- dits[2] = 2.5;
- gMC->Gsvolu("I105", "BOX ", idtmed[201], dits, 3);
-
- dits[0] = 0.843;
- dits[1] = 0.01;
- dits[2] = 14.344;
- gMC->Gsvolu("I104", "BOX ", idtmed[275], dits, 3); // bus
-
- dits[0] = 0.793;
- dits[1] = 0.03;
- dits[2] = 3.536;
- gMC->Gsvolu("I1D3", "BOX ", idtmed[254], dits, 3); // contains det and chip
-
- dits[0] = 0.06;
- dits[1] = 0.08;
- dits[2] = 24;
- dits[3] = 0;
- dits[4] = 80;
- gMC->Gsvolu("I112", "TUBS", idtmed[253], dits, 5);
-
- dits[0] = 0.04;
- dits[1] = 0.06;
- dits[2] = 24;
- dits[3] = 0;
- dits[4] = 80;
- gMC->Gsvolu("I111", "TUBS", idtmed[253], dits, 5);
-
- dits[0] = 0.15;
- dits[1] = 0.0146;
- dits[2] = 24;
- gMC->Gsvolu("I118", "BOX ", idtmed[273], dits, 3);
-
- dits[0] = 0.1315;
- dits[1] = 0.01;
- dits[2] = 24;
- gMC->Gsvolu("I110", "BOX ", idtmed[253], dits, 3);
-
- dits[0] = 0.025;
- dits[1] = 0.035;
- dits[2] = 24;
- dits[3] = 0;
- dits[4] = 180;
- gMC->Gsvolu("I114", "TUBS", idtmed[264], dits, 5);
-
- dits[0] = 0;
- dits[1] = 0.025;
- dits[2] = 24;
- dits[3] = 0;
- dits[4] = 180;
- gMC->Gsvolu("I115", "TUBS", idtmed[211], dits, 5);
-
- dits[0] = 0.063;
- dits[1] = 0.035;
- dits[2] = 24;
- gMC->Gsvolu("I116", "BOX ", idtmed[264], dits, 3);
-
- dits[0] = 0.705;
- dits[1] = 0.015;
- dits[2] = 3.536;
- gMC->Gsvolu("I101", "BOX ", idtmed[250], dits, 3); // contains detector
-
- dits[0] = 0.793;
- dits[1] = 0.015;
- dits[2] = 0.68;
- gMC->Gsvolu("I102", "BOX ", idtmed[201], dits, 3); // chip
-
- dits[0] = 0.705;
- dits[1] = 0.015;
- dits[2] = 3.536;
- gMC->Gsvolu("I1D1", "BOX ", idtmed[250], dits, 3); // contains detector
-
- dits[0] = 0.063;
- dits[1] = 0.025;
- dits[2] = 24;
- gMC->Gsvolu("I117", "BOX ", idtmed[211], dits, 3);
-
- dits[0] = 0.64;
- dits[1] = 0.015;
- dits[2] = 3.48;
- gMC->Gsvolu("ITS1", "BOX ", idtmed[200], dits, 3); // detector
-
- dits[0] = 0.64;
- dits[1] = 0.015;
- dits[2] = 3.48;
- gMC->Gsvolu("ITS2", "BOX ", idtmed[200], dits, 3); // detector
-
- dits[0] = 3.701;
- dits[1] = 7.699;
- dits[2] = 4;
- dits[3] = 57.1;
- dits[4] = 99.9;
- gMC->Gsvolu("I650", "TUBS", idtmed[254], dits, 5); // was I150 in old geom.
-
- dits[0] = 0;
- dits[1] = 0.5;
- dits[2] = 1.5;
- gMC->Gsvolu("I676", "TUBE", idtmed[274], dits, 3); // was I176 in old geom.
-
- dits[0] = 0;
- dits[1] = 0.18;
- dits[2] = 0.8;
- gMC->Gsvolu("I673", "TUBE", idtmed[274], dits, 3); // was I173 in old geom.
-
- dits[0] = 0;
- dits[1] = 0.18;
- dits[2] = 3;
- gMC->Gsvolu("I671", "TUBE", idtmed[274], dits, 3); // was I171 in old geom.
-
- dits[0] = 0;
- dits[1] = 0.075;
- dits[2] = 0.8;
- gMC->Gsvolu("I669", "TUBE", idtmed[264], dits, 3); // was I169 in old geom.
-
- dits[0] = 3.5;
- dits[1] = 5.6;
- dits[2] = 0.55;
- dits[3] = 0;
- dits[4] = 38;
- gMC->Gsvolu("I667", "TUBS", idtmed[263], dits, 5); // was I167 in old geom.
-
- dits[0] = 6.6;
- dits[1] = 7.6;
- dits[2] = 0.5;
- dits[3] = 0;
- dits[4] = 9;
- gMC->Gsvolu("I666", "TUBS", idtmed[263], dits, 5); // was I166 in old geom.
-
- dits[0] = 0.26;
- dits[1] = 0.32;
- dits[2] = 0.55;
- gMC->Gsvolu("I678", "TUBE", idtmed[263], dits, 3); // was I178 in old geom.
+ // SDD heat bridge - F.T. March,7-2001
+ I039dits[0] = 1.1000;
+ I039dits[1] = 0.0087;
+ I039dits[2] = 3.2500;
+ gMC->Gsvolu("I039", "BOX ", idtmed[268], I039dits, 3);
- dits[0] = 0;
- dits[1] = 0.3;
- dits[2] = 1.5;
- gMC->Gsvolu("I677", "TUBE", idtmed[211], dits, 3); // was I177 in old geom.
-
- dits[0] = 0.07;
- dits[1] = 0.125;
- dits[2] = 0.3;
- gMC->Gsvolu("I675", "TUBE", idtmed[263], dits, 3); // was I175 in old geom.
-
- dits[0] = 0;
- dits[1] = 0.1;
- dits[2] = 0.8;
- gMC->Gsvolu("I674", "TUBE", idtmed[211], dits, 3); // was I174 in old geom.
+ // SDD clip part 1
+ dits[0] = 0.25;
+ dits[1] = 0.01;
+ dits[2] = I039dits[2];
+ gMC->Gsvolu("I040", "BOX ", idtmed[268], dits, 3);
- dits[0] = 0;
- dits[1] = 0.1;
- dits[2] = 3;
- gMC->Gsvolu("I672", "TUBE", idtmed[211], dits, 3); // was I172 in old geom.
+ // SDD clip part 2
+ I041dits[0] = 0.1;
+ I041dits[1] = 0.12;
+ I041dits[2] = I039dits[2];
+ I041dits[3] = 90;
+ I041dits[4] = 320;
+ gMC->Gsvolu("I041", "TUBS", idtmed[268], I041dits, 5);
+
+
+ // SDD PASCAL - F.T. March,7-2001
+ I042dits[0] = 0.5000;
+ I042dits[1] = 0.0175;
+ I042dits[2] = 0.5000;
+ gMC->Gsvolu("I042", "BOX ", idtmed[206], I042dits, 3);
+
+ // SDD AMBRA - F.T. March,7-2001
+ I043dits[0] = 0.3500;
+ I043dits[1] = 0.0175;
+ I043dits[2] = 0.5000;
+ gMC->Gsvolu("I043", "BOX ", idtmed[206], I043dits, 3);
+
+ // SDD capacitors - F.T. March,7-2001
+ I051dits[0] = 0.1400;
+ I051dits[1] = 0.0350;
+ I051dits[2] = 0.0625;
+ gMC->Gsvolu("I051", "BOX ", idtmed[276], I051dits, 3);
+
+ // SDD hybrid circuit - F.T. March,7-2001
+ I052dits[0] = 1.725000;
+ I052dits[1] = 0.003743;
+ I052dits[2] = I039dits[2];
+ gMC->Gsvolu("I052", "BOX ", idtmed[281], I052dits, 3);
+
+ // SDD anode microcable : changed - F.T. March,7-2001
+ I044dits[0] = I018dits[2];
+ I044dits[1] = I039dits[2];
+ I044dits[2] = 0.00084;
+ I044dits[3] = (15.189149/(I044dits[0]+I044dits[1]))/2;
+ gMC->Gsvolu("I044", "TRD1", idtmed[282], I044dits, 4);
+ volI044 = ((2*I044dits[0] + 2*I044dits[1]) * 2*I044dits[2])/2 * 2*I044dits[3];
+
+ // SDD electronics box - F.T. March,7-2001
+ I050dits[1] = I039dits[1]+I052dits[1]+I051dits[1]+I044dits[2];
+ I050dits[0] = I018dits[1]/cos(30.*3.14159/180.)-I050dits[1]*sin(30.*3.14159/180.);
+ I050dits[2] = I018dits[2];
+ gMC->Gsvolu("I050", "BOX ", idtmed[209], I050dits, 3);
+
+ // SDD sensitive volume
+ dits[0] = 3.50850;
+ dits[1] = 0.01499; // not 0.015 because it is included into I302 which is 0.015
+ dits[2] = 3.76320;
+ gMC->Gsvolu("ITS3", "BOX ", idtmed[200], dits, 3);
- dits[0] = 0;
- dits[1] = 0.0746;
- dits[2] = 0.8;
- gMC->Gsvolu("I670", "TUBE", idtmed[211], dits, 3); // was I170 in old geom.
+ // Like for ITS3 - F.T. March,7-2001
+ dits[0] = 3.50850;
+ dits[1] = 0.01499; // not 0.015 because it is included into I402 which is 0.015
+ dits[2] = 3.76320;
+ gMC->Gsvolu("ITS4", "BOX ", idtmed[200], dits, 3);
- dits[0] = 3.7;
- dits[1] = 5.4;
- dits[2] = 0.35;
- dits[3] = 2;
- dits[4] = 36;
- gMC->Gsvolu("I668", "TUBS", idtmed[211], dits, 5); // was I168 in old geom.
- }
+ // --- Define SSD volumes ------------------------------------------
- // --- Define SPD (option 'b') volumes ----------------------------
+
+ dits[0] = 0;
+ dits[1] = 360;
+ dits[2] = 6;
+ dits[3] = -57.45;
+ dits[4] = 43.6;
+ dits[5] = 48;
+ dits[6] = -49.15;
+ dits[7] = 43.6;
+ dits[8] = 48;
+ dits[9] = -49.15;
+ dits[10] = 36.9;
+ dits[11] = 48;
+ dits[12] = 50.55;
+ dits[13] = 36.9;
+ dits[14] = 48;
+ dits[15] = 50.55;
+ dits[16] = 43.6;
+ dits[17] = 48;
+ dits[18] = 57.45;
+ dits[19] = 43.6;
+ dits[20] = 48;
+ gMC->Gsvolu("IT56", "PCON", idtmed[220], dits, 21);
- // SPD - option 'b'
- // detector thickness = 300 microns
- // chip thickness = 300 microns
- // (this is the default)
-
- if (option == 2 && thickness == 2) {
-
- dits[0] = 3.7;
- dits[1] = 7.75;
- dits[2] = 24;
- gMC->Gsvolu("IT12", "TUBE", idtmed[254], dits, 3);
-
- dits[0] = 3.7;
- dits[1] = 7.7;
- dits[2] = 24;
- dits[3] = 57;
- dits[4] = 100;
- gMC->Gsvolu("I12B", "TUBS", idtmed[254], dits, 5); // sector
-
- dits[0] = 0.843;
- dits[1] = 0.0425;
- dits[2] = 19.344;
- gMC->Gsvolu("I10B", "BOX ", idtmed[254], dits, 3); // lower ladder
-
- dits[0] = 0.843;
- dits[1] = 0.0425;
- dits[2] = 19.344;
- gMC->Gsvolu("I20B", "BOX ", idtmed[254], dits, 3); // upper ladder
-
- dits[0] = 1.3673;
- dits[1] = 0.01;
- dits[2] = 24;
- gMC->Gsvolu("I123", "BOX ", idtmed[253], dits, 3);
-
- dits[0] = 0.06;
- dits[1] = 0.08;
- dits[2] = 24;
- dits[3] = -36.79;
- dits[4] = 21.834;
- gMC->Gsvolu("I121", "TUBS", idtmed[253], dits, 5);
-
- dits[0] = 0.1253;
- dits[1] = 0.01;
- dits[2] = 24;
- gMC->Gsvolu("I122", "BOX ", idtmed[253], dits, 3);
-
- dits[0] = 0.04;
- dits[1] = 0.06 ;
- dits[2] = 24;
- dits[3] = 126.79;
- dits[4] = 270;
- gMC->Gsvolu("I120", "TUBS", idtmed[253], dits, 5);
-
- dits[0] = 0.1134;
- dits[1] = 0.01;
- dits[2] = 24;
- gMC->Gsvolu("I144", "BOX ", idtmed[253], dits, 3);
-
- dits[0] = 0.25;
- dits[1] = 0.06;
- dits[2] = 24;
- gMC->Gsvolu("I113", "BOX ", idtmed[254], dits, 3);
-
- dits[0] = 0.077;
- dits[1] = 0.01;
- dits[2] = 24;
- gMC->Gsvolu("I143", "BOX ", idtmed[253], dits, 3);
-
- dits[0] = 0.04;
- dits[1] = 0.06;
- dits[2] = 24;
- dits[3] = 0;
- dits[4] = 90;
- gMC->Gsvolu("I142", "TUBS", idtmed[253], dits, 5);
-
- dits[0] = 0.0695;
- dits[1] = 0.01;
- dits[2] = 24;
- gMC->Gsvolu("I141", "BOX ", idtmed[253], dits, 3);
-
- dits[0] = 0.06;
- dits[1] = 0.08;
- dits[2] = 24;
- dits[3] = 0;
- dits[4] = 108;
- gMC->Gsvolu("I140", "TUBS", idtmed[253], dits, 5);
-
- dits[0] = 0.1835;
- dits[1] = 0.01;
- dits[2] = 24;
- gMC->Gsvolu("I139", "BOX ", idtmed[253], dits, 3);
-
- dits[0] = 0.1894 ;
- dits[1] = 0.01;
- dits[2] = 24;
- gMC->Gsvolu("I138", "BOX ", idtmed[253], dits, 3);
-
- dits[0] = 0.04;
- dits[1] = 0.06;
- dits[2] = 24;
- dits[3] = 0;
- dits[4] = 75.261;
- gMC->Gsvolu("I137", "TUBS", idtmed[253], dits, 5);
-
- dits[0] = 1.3401;
- dits[1] = 0.01;
- dits[2] = 24;
- gMC->Gsvolu("I136", "BOX ", idtmed[253], dits, 3);
-
- dits[0] = 0.05;
- dits[1] = 0.07;
- dits[2] = 24;
- dits[3] = 0;
- dits[4] = 72.739;
- gMC->Gsvolu("I135", "TUBS", idtmed[253], dits, 5);
-
- dits[0] = 0.1193;
- dits[1] = 0.01;
- dits[2] = 24;
- gMC->Gsvolu("I134", "BOX ", idtmed[253], dits, 3);
-
- dits[0] = 0.163;
- dits[1] = 0.01;
- dits[2] = 24;
- gMC->Gsvolu("I133", "BOX ", idtmed[253], dits, 3);
-
- dits[0] = 0.04;
- dits[1] = 0.06;
- dits[2] = 24;
- dits[3] = 0;
- dits[4] = 157.633;
- gMC->Gsvolu("I132", "TUBS", idtmed[253], dits, 5);
-
- dits[0] = 0.2497;
- dits[1] = 0.01;
- dits[2] = 24;
- gMC->Gsvolu("I131", "BOX ", idtmed[253], dits, 3);
-
- dits[0] = 0.06;
- dits[1] = 0.08;
- dits[2] = 24;
- dits[3] = 0;
- dits[4] = 148.633;
- gMC->Gsvolu("I130", "TUBS", idtmed[253], dits, 5);
-
- dits[0] = 0.292;
- dits[1] = 0.01;
- dits[2] = 24;
- gMC->Gsvolu("I129", "BOX ", idtmed[253], dits, 3);
-
- dits[0] = 0.163;
- dits[1] = 0.01;
- dits[2] = 24;
- gMC->Gsvolu("I128", "BOX ", idtmed[253], dits, 3);
-
- dits[0] = 0.04;
- dits[1] = 0.06;
- dits[2] = 24;
- dits[3] = 0;
- dits[4] = 161.297;
- gMC->Gsvolu("I126", "TUBS", idtmed[253], dits, 5);
-
- dits[0] = 0.2433;
- dits[1] = 0.01;
- dits[2] = 24;
- gMC->Gsvolu("I125", "BOX ", idtmed[253], dits, 3);
-
- dits[0] = 0.06;
- dits[1] = 0.08;
- dits[2] = 24;
- dits[3] = 0;
- dits[4] = 42.883;
- gMC->Gsvolu("I124", "TUBS", idtmed[253], dits, 5);
-
- dits[0] = 0.793;
- dits[1] = 0.015 ;
- dits[2] = 2.5;
- gMC->Gsvolu("I105", "BOX ", idtmed[201], dits, 3);
-
- dits[0] = 0.793;
- dits[1] = 0.03;
- dits[2] = 3.536;
- gMC->Gsvolu("I107", "BOX ", idtmed[254], dits, 3); // contains det and chip
-
- dits[0] = 0.705;
- dits[1] = 0.01;
- dits[2] = 2.5;
- gMC->Gsvolu("I109", "BOX ", idtmed[275], dits, 3);
-
- dits[0] = 0.705;
- dits[1] = 0.01;
- dits[2] = 14.344;
- gMC->Gsvolu("I108", "BOX ", idtmed[275], dits, 3); // bus
-
- dits[0] = 0.7975;
- dits[1] = 0.03;
- dits[2] = 3.536;
- gMC->Gsvolu("I1D7", "BOX ", idtmed[254], dits, 3); // contains det and chip
-
- dits[0] = 0.06;
- dits[1] = 0.08;
- dits[2] = 24;
- dits[3] = 0;
- dits[4] = 80;
- gMC->Gsvolu("I112", "TUBS", idtmed[253], dits, 5);
-
- dits[0] = 0.04;
- dits[1] = 0.06;
- dits[2] = 24;
- dits[3] = 0;
- dits[4] = 80;
- gMC->Gsvolu("I111", "TUBS", idtmed[253], dits, 5);
-
- dits[0] = 0.15;
- dits[1] = 0.0146;
- dits[2] = 24;
- gMC->Gsvolu("I118", "BOX ", idtmed[273], dits, 3);
-
- dits[0] = 0.1315;
- dits[1] = 0.01;
- dits[2] = 24;
- gMC->Gsvolu("I110", "BOX ", idtmed[253], dits, 3);
-
- dits[0] = 0.025;
- dits[1] = 0.035;
- dits[2] = 24;
- dits[3] = 0;
- dits[4] = 180;
- gMC->Gsvolu("I114", "TUBS", idtmed[264], dits, 5);
-
- dits[0] = 0;
- dits[1] = 0.025;
- dits[2] = 24;
- dits[3] = 0;
- dits[4] = 180;
- gMC->Gsvolu("I115", "TUBS", idtmed[211], dits, 5);
-
- dits[0] = 0.063;
- dits[1] = 0.035;
- dits[2] = 24;
- gMC->Gsvolu("I116", "BOX ", idtmed[264], dits, 3);
-
- dits[0] = 0.7975;
- dits[1] = 0.015;
- dits[2] = 0.68;
- gMC->Gsvolu("I106", "BOX ", idtmed[203], dits, 3); // chip
-
- dits[0] = 0.705;
- dits[1] = 0.015;
- dits[2] = 3.536;
- gMC->Gsvolu("I101", "BOX ", idtmed[250], dits, 3); // contains detector
-
- dits[0] = 0.705;
- dits[1] = 0.015;
- dits[2] = 3.536;
- gMC->Gsvolu("I1D1", "BOX ", idtmed[250], dits, 3); // contains detector
-
- dits[0] = 0.063;
- dits[1] = 0.025;
- dits[2] = 24;
- gMC->Gsvolu("I117", "BOX ", idtmed[211], dits, 3);
-
- dits[0] = 0.64;
- dits[1] = 0.015;
- dits[2] = 3.48;
- gMC->Gsvolu("ITS1", "BOX ", idtmed[200], dits, 3); // detector
-
- dits[0] = 0.64;
- dits[1] = 0.015;
- dits[2] = 3.48;
- gMC->Gsvolu("ITS2", "BOX ", idtmed[200], dits, 3); // detector
-
- dits[0] = 3.701;
- dits[1] = 7.699;
- dits[2] = 4;
- dits[3] = 57.1;
- dits[4] = 99.9;
- gMC->Gsvolu("I650", "TUBS", idtmed[254], dits, 5); // was I150 in old geom.
-
- dits[0] = 0;
- dits[1] = 0.5;
- dits[2] = 1.5;
- gMC->Gsvolu("I676", "TUBE", idtmed[274], dits, 3); // was I176 in old geom.
-
- dits[0] = 0;
- dits[1] = 0.18;
- dits[2] = 0.8;
- gMC->Gsvolu("I673", "TUBE", idtmed[274], dits, 3); // was I173 in old geom.
-
- dits[0] = 0;
- dits[1] = 0.18;
- dits[2] = 3;
- gMC->Gsvolu("I671", "TUBE", idtmed[274], dits, 3); // was I171 in old geom.
-
- dits[0] = 0;
- dits[1] = 0.075;
- dits[2] = 0.8;
- gMC->Gsvolu("I669", "TUBE", idtmed[264], dits, 3); // was I169 in old geom.
-
- dits[0] = 3.5;
- dits[1] = 5.6;
- dits[2] = 0.55;
- dits[3] = 0;
- dits[4] = 38;
- gMC->Gsvolu("I667", "TUBS", idtmed[263], dits, 5); // was I167 in old geom.
-
- dits[0] = 6.6;
- dits[1] = 7.6;
- dits[2] = 0.5;
- dits[3] = 0;
- dits[4] = 9;
- gMC->Gsvolu("I666", "TUBS", idtmed[263], dits, 5); // was I166 in old geom.
-
- dits[0] = 0.26;
- dits[1] = 0.32;
- dits[2] = 0.55;
- gMC->Gsvolu("I678", "TUBE", idtmed[263], dits, 3); // was I178 in old geom.
-
- dits[0] = 0;
- dits[1] = 0.3;
- dits[2] = 1.5;
- gMC->Gsvolu("I677", "TUBE", idtmed[211], dits, 3); // was I177 in old geom.
-
- dits[0] = 0.07;
- dits[1] = 0.125;
- dits[2] = 0.3;
- gMC->Gsvolu("I675", "TUBE", idtmed[263], dits, 3); // was I175 in old geom.
-
- dits[0] = 0;
- dits[1] = 0.1;
- dits[2] = 0.8;
- gMC->Gsvolu("I674", "TUBE", idtmed[211], dits, 3); // was I174 in old geom.
-
- dits[0] = 0;
- dits[1] = 0.1;
- dits[2] = 3;
- gMC->Gsvolu("I672", "TUBE", idtmed[211], dits, 3); // was I172 in old geom.
-
- dits[0] = 0;
- dits[1] = 0.0746;
- dits[2] = 0.8;
- gMC->Gsvolu("I670", "TUBE", idtmed[211], dits, 3); // was I170 in old geom.
-
- dits[0] = 3.7;
- dits[1] = 5.4;
- dits[2] = 0.35;
- dits[3] = 2;
- dits[4] = 36;
- gMC->Gsvolu("I668", "TUBS", idtmed[211], dits, 5); // was I168 in old geom.
-
- }
-
- // --- Define SDD volumes ------------------------------------------
-
-
- dits[0] = 0;
- dits[1] = 360;
- dits[2] = 6;
- dits[3] = -34.6;
- dits[4] = 23.495;
- dits[5] = 28.5;
- dits[6] = -27.35;
- dits[7] = 23.495;
- dits[8] = 28.5;
- dits[9] = -27.35;
- dits[10] = 14.595;
- dits[11] = 28.5;
- dits[12] = 27.35;
- dits[13] = 14.595;
- dits[14] = 28.5;
- dits[15] = 27.35;
- dits[16] = 23.495;
- dits[17] = 28.5;
- dits[18] = 34.65;
- dits[19] = 23.495;
- dits[20] = 28.5;
- gMC->Gsvolu("IT34", "PCON", idtmed[209], dits, 21);
-
- dits[0] = 3.2;
- dits[1] = 2;
- dits[2] = 34.65;
- gMC->Gsvolu("I048", "BOX ", idtmed[209], dits, 3);
-
- dits[0] = 3.63;
- dits[1] = 0.135;
- dits[2] = 30.385;
- gMC->Gsvolu("I005", "BOX ", idtmed[209], dits, 3);
-
- dits[0] = 3.2;
- dits[1] = 2;
- dits[2] = 27.35;
- gMC->Gsvolu("I047", "BOX ", idtmed[209], dits, 3);
-
- dits[0] = 3.63;
- dits[1] = 0.135;
- dits[2] = 23.05;
- gMC->Gsvolu("I004", "BOX ", idtmed[209], dits, 3);
-
- dits[0] = 3.2;
- dits[1] = 2;
- dits[2] = 2.725;
- gMC->Gsvolu("I024", "BOX ", idtmed[209], dits, 3);
-
- dits[0] = 3.2;
- dits[1] = 2;
- dits[2] = 3.65;
- gMC->Gsvolu("I018", "BOX ", idtmed[209], dits, 3);
-
- dits[0] = 3.625;
- dits[1] = 0.015;
- dits[2] = 4.382;
- gMC->Gsvolu("I302", "BOX ", idtmed[206], dits, 3);
-
- dits[0] = 3.625;
- dits[1] = 0.015;
- dits[2] = 4.382;
- gMC->Gsvolu("I402", "BOX ", idtmed[206], dits, 3);
-
- dits[0] = 0.2;
- dits[1] = 0.1815;
- dits[2] = 2.725;
- dits[3] = 0.015;
- gMC->Gsvolu("I025", "TRD1", idtmed[208], dits, 4);
-
- dits[0] = 0.183;
- dits[1] = 0.165;
- dits[2] = 2.725;
- dits[3] = 0.015;
- gMC->Gsvolu("I026", "TRD1", idtmed[208], dits, 4);
-
- dits[0] = 2.23;
- dits[1] = 2.1;
- dits[2] = 0.05;
- dits[3] = 0.03;
- gMC->Gsvolu("I021", "TRD1", idtmed[208], dits, 4);
-
- dits[0] = 2.615;
- dits[1] = 2.465;
- dits[2] = 0.06;
- dits[3] = 0.04;
- gMC->Gsvolu("I023", "TRD1", idtmed[208], dits, 4);
-
- dits[0] = 2.1;
- dits[1] = 2;
- dits[2] = 0.06;
- dits[3] = 0.04;
- gMC->Gsvolu("I022", "TRD1", idtmed[208], dits, 4);
-
- dits[0] = 2.15;
- dits[1] = 0.2;
- dits[2] = 0.85;
- gMC->Gsvolu("I028", "BOX ", idtmed[263], dits, 3);
-
- dits[0] = 1.25;
- dits[1] = 0.6;
- dits[2] = 0.075;
- gMC->Gsvolu("I029", "BOX ", idtmed[263], dits, 3);
-
- dits[0] = 1.25;
- dits[1] = 0.1;
- dits[2] = 0.075;
- dits[3] = 1;
- gMC->Gsvolu("I030", "TRD1", idtmed[263], dits, 4);
-
- dits[0] = 1.6;
- dits[1] = 7;
- dits[2] = 0;
- dits[3] = 0.075;
- dits[4] = 0.775;
- dits[5] = 0.775;
- dits[6] = 0;
- dits[7] = 0.075;
- dits[8] = 0.376;
- dits[9] = 0.376;
- dits[10] = 0;
- gMC->Gsvolu("I027", "TRAP", idtmed[263], dits, 11);
-
- dits[0] = 0;
- dits[1] = 0.093;
- dits[2] = 2.725;
- gMC->Gsvolu("I032", "TUBE", idtmed[211], dits, 3);
-
- dits[0] = 0.093;
- dits[1] = 0.1;
- dits[2] = 2.725;
- gMC->Gsvolu("I031", "TUBE", idtmed[264], dits, 3);
-
- dits[0] = 0.7;
- dits[1] = 0.002;
- dits[2] = 2.725;
- gMC->Gsvolu("I046", "BOX ", idtmed[269], dits, 3);
-
- dits[0] = 0.2;
- dits[1] = 0.182;
- dits[2] = 3.65;
- dits[3] = 0.015;
- gMC->Gsvolu("I019", "TRD1", idtmed[208], dits, 4);
-
- dits[0] = 0.183;
- dits[1] = 0.165;
- dits[2] = 3.65;
- dits[3] = 0.015;
- gMC->Gsvolu("I020", "TRD1", idtmed[208], dits, 4);
-
- dits[0] = 0.3;
- dits[1] = 0.05;
- dits[2] = 0.15;
- gMC->Gsvolu("I033", "BOX ", idtmed[208], dits, 3);
-
- dits[0] = 0.2;
- dits[1] = 0.01;
- dits[2] = 0.05;
- gMC->Gsvolu("I036", "BOX ", idtmed[208], dits, 3);
-
- dits[0] = 0;
- dits[1] = 0.05;
- dits[2] = 0.225;
- gMC->Gsvolu("I034", "TUBE", idtmed[208], dits, 3);
-
- dits[0] = 0.1;
- dits[1] = 0.15;
- dits[2] = 0.2;
- gMC->Gsvolu("I035", "TUBE", idtmed[208], dits, 3);
-
- dits[0] = 0.7;
- dits[1] = 0.002;
- dits[2] = 3.65;
- gMC->Gsvolu("I045", "BOX ", idtmed[269], dits, 3);
-
- dits[0] = 0;
- dits[1] = 0.093;
- dits[2] = 3.65;
- gMC->Gsvolu("I038", "TUBE", idtmed[211], dits, 3);
-
- dits[0] = 0.093;
- dits[1] = 0.1;
- dits[2] = 3.65;
- gMC->Gsvolu("I037", "TUBE", idtmed[264], dits, 3);
-
- dits[0] = 1;
- dits[1] = 0.01;
- dits[2] = 3.6;
- gMC->Gsvolu("I039", "BOX ", idtmed[268], dits, 3);
-
- dits[0] = 0.25;
- dits[1] = 0.01;
- dits[2] = 3.4;
- gMC->Gsvolu("I040", "BOX ", idtmed[268], dits, 3);
-
- dits[0] = 0.1;
- dits[1] = 0.12;
- dits[2] = 3.4;
- dits[3] = 90;
- dits[4] = 320;
- gMC->Gsvolu("I041", "TUBS", idtmed[268], dits, 5);
-
- dits[0] = 0.4;
- dits[1] = 0.015;
- dits[2] = 0.4;
- gMC->Gsvolu("I042", "BOX ", idtmed[206], dits, 3);
-
- dits[0] = 0.25;
- dits[1] = 0.015;
- dits[2] = 0.25;
- gMC->Gsvolu("I043", "BOX ", idtmed[206], dits, 3);
-
- dits[0] = 0.75;
- dits[1] = 0.002;
- dits[2] = 3.4;
- gMC->Gsvolu("I044", "BOX ", idtmed[269], dits, 3);
-
- dits[0] = 1.8125;
- dits[1] = 3.81;
- dits[2] = 0;
- dits[3] = 0.015;
- dits[4] = 0.242;
- dits[5] = 0.242;
- dits[6] = 0;
- dits[7] = 0.015;
- dits[8] = 1E-03;
- dits[9] = 1E-03;
- dits[10] = 0;
- gMC->Gsvolu("I303", "TRAP", idtmed[206], dits, 11);
-
- dits[0] = 1.8125;
- dits[1] = 3.81;
- dits[2] = 0;
- dits[3] = 0.015;
- dits[4] = 0.242;
- dits[5] = 0.242;
- dits[6] = 0;
- dits[7] = 0.015;
- dits[8] = 1E-03;
- dits[9] = 1E-03;
- dits[10] = 0;
- gMC->Gsvolu("I403", "TRAP", idtmed[206], dits, 11);
-
- dits[0] = 3.5;
- dits[1] = 0.01499; // not 0.015 because it is included into I302 which is 0.015
- dits[2] = 3.763;
- gMC->Gsvolu("ITS3", "BOX ", idtmed[200], dits, 3);
-
- dits[0] = 3.5;
- dits[1] = 0.01499; // not 0.015 because it is included into I402 which is 0.015
- dits[2] = 3.763;
- gMC->Gsvolu("ITS4", "BOX ", idtmed[200], dits, 3);
-
-
- // --- Define SSD volumes ------------------------------------------
-
-
- dits[0] = 0;
- dits[1] = 360;
- dits[2] = 6;
- dits[3] = -57.5;
- dits[4] = 43.5;
- dits[5] = 48;
- dits[6] = -47.2;
- dits[7] = 43.5;
- dits[8] = 48;
- dits[9] = -47.2;
- dits[10] = 36.7;
- dits[11] = 48;
- dits[12] = 47.2;
- dits[13] = 36.7;
- dits[14] = 48;
- dits[15] = 47.2;
- dits[16] = 43.5;
- dits[17] = 48;
- dits[18] = 56.96;
- dits[19] = 43.5;
- dits[20] = 48;
- gMC->Gsvolu("IT56", "PCON", idtmed[220], dits, 21);
-
- dits[0] = 3.4;
- dits[1] = 1.955;
- dits[2] = 56.5;
- gMC->Gsvolu("I570", "BOX ", idtmed[204], dits, 3);
+ dits[0] = 3.4;
+ dits[1] = 1.955;
+ dits[2] = 56.5;
+ gMC->Gsvolu("I570", "BOX ", idtmed[204], dits, 3);
dits[0] = 3.75;
dits[1] = 0.045;
dits[2] = 2.1;
gMC->Gsvolu("I562", "BOX ", idtmed[206], dits, 3);
- dits[0] = 0;
- dits[1] = 0.07;
- dits[2] = 3.15;
- gMC->Gsvolu("I559", "TUBE", idtmed[211], dits, 3);
+ if (fluid == 1) {
+ dits[0] = 0;
+ dits[1] = 0.07;
+ dits[2] = 3.15;
+ gMC->Gsvolu("I559", "TUBE", idtmed[211], dits, 3); // set water as cooling fluid
+ } else {
+ dits[0] = 0;
+ dits[1] = 0.07;
+ dits[2] = 3.15;
+ gMC->Gsvolu("I559", "TUBE", idtmed[212], dits, 3); // set freon as cooling fluid
+ }
dits[0] = 0.07;
dits[1] = 0.1;
dits[2] = 1.955;
gMC->Gsvolu("I542", "TUBE", idtmed[210], dits, 3);
- dits[0] = 0;
- dits[1] = 0.07;
- dits[2] = 1.955;
- gMC->Gsvolu("I541", "TUBE", idtmed[211], dits, 3);
+ if (fluid == 1) {
+ dits[0] = 0;
+ dits[1] = 0.07;
+ dits[2] = 1.955;
+ gMC->Gsvolu("I541", "TUBE", idtmed[211], dits, 3); // set water as cooling fluid
+ } else {
+ dits[0] = 0;
+ dits[1] = 0.07;
+ dits[2] = 1.955;
+ gMC->Gsvolu("I541", "TUBE", idtmed[212], dits, 3); // set freon as cooling fluid
+ }
dits[0] = 0.3;
dits[1] = 0.15;
dits[2] = 2;
gMC->Gsvolu("ITS6", "BOX ", idtmed[200], dits, 3);
- dits[0] = 0;
- dits[1] = 0.07;
- dits[2] = 3.15;
- gMC->Gsvolu("I550", "TUBE", idtmed[211], dits, 3);
+ if (fluid == 1) {
+ dits[0] = 0;
+ dits[1] = 0.07;
+ dits[2] = 3.15;
+ gMC->Gsvolu("I550", "TUBE", idtmed[211], dits, 3); // set water as cooling fluid
+ } else {
+ dits[0] = 0;
+ dits[1] = 0.07;
+ dits[2] = 3.15;
+ gMC->Gsvolu("I550", "TUBE", idtmed[212], dits, 3); // set freon as cooling fluid
+ }
dits[0] = 0.07;
dits[1] = 0.1;
dits[3] = 0.08;
gMC->Gsvolu("I517", "TRD1", idtmed[203], dits, 4);
- dits[0] = 0;
- dits[1] = 0.07;
- dits[2] = 1.955;
- gMC->Gsvolu("I531", "TUBE", idtmed[211], dits, 3);
+ if (fluid == 1) {
+ dits[0] = 0;
+ dits[1] = 0.07;
+ dits[2] = 1.955;
+ gMC->Gsvolu("I531", "TUBE", idtmed[211], dits, 3); // set water as cooling fluid
+ } else {
+ dits[0] = 0;
+ dits[1] = 0.07;
+ dits[2] = 1.955;
+ gMC->Gsvolu("I531", "TUBE", idtmed[212], dits, 3); // set freon as cooling fluid
+ }
dits[0] = 0.07;
dits[1] = 0.1;
dits[0] = 0.3;
dits[1] = 0.15;
dits[2] = 0.15;
- gMC->Gsvolu("I533", "BOX ", idtmed[203], dits, 3);
-
- dits[0] = 3.65;
- dits[1] = 0.015;
- dits[2] = 2;
- gMC->Gsvolu("ITS5", "BOX ", idtmed[200], dits, 3);
-
-
- // --- Define volumes of shield between SPD and SDD ----------------
-
-
- dits[0] = 8.37;
- dits[1] = 9.93;
- dits[2] = 25;
- gMC->Gsvolu("IC01", "TUBE", idtmed[289], dits, 3);
-
- dits[0] = 8.3;
- dits[1] = 10;
- dits[2] = 17.5/2.;
- gMC->Gsvolu("IC02", "TUBE", idtmed[289], dits, 3);
-
-
- // --- Define volumes of cylinder between SDD and SSD --------------
-
-
- dits[0] = (59.5-0.13/2.)/2.;
- dits[1] = (59.5+0.13/2.)/2.;
- dits[2] = 56.2;
- gMC->Gsvolu("ICY2", "TUBE", idtmed[225], dits, 3);
-
-
-
- // --- Define volumes of SDD cone ----------------------------------
-
- dits[0] = 0;
- dits[1] = 360;
- dits[2] = 12;
- dits[3] = -59.7;
- dits[4] = 27;
- dits[5] = 28;
- dits[6] = -42.7;
- dits[7] = 10;
- dits[8] = 28;
- dits[9] = -34.65;
- dits[10] = 10;
- dits[11] = 28;
- dits[12] = -34.65;
- dits[13] = 10;
- dits[14] = 23.495;
- dits[15] = -23.7;
- dits[16] = 10;
- dits[17] = 23.495;
- dits[18] = -23.7;
- dits[19] = 10;
- dits[20] = 14.595;
- dits[21] = 23.7;
- dits[22] = 10;
- dits[23] = 14.595;
- dits[24] = 23.7;
- dits[25] = 10;
- dits[26] = 23.495;
- dits[27] = 34.65;
- dits[28] = 10;
- dits[29] = 23.495;
- dits[30] = 34.65;
- dits[31] = 10;
- dits[32] = 28;
- dits[33] = 42.6263;
- dits[34] = 10;
- dits[35] = 28;
- dits[36] = 59.7;
- dits[37] = 27.2637;
- dits[38] = 28;
- gMC->Gsvolu("IS02", "PCON", idtmed[204], dits, 39);
-
- dits[0] = 0;
- dits[1] = 360;
- dits[2] = 6;
- dits[3] = 39.4;
- dits[4] = 10.065;
- dits[5] = 12.7;
- dits[6] = 40.66;
- dits[7] = 10.065;
- dits[8] = 13.96;
- dits[9] = 40.66;
- dits[10] = 12.1781;
- dits[11] = 13.96;
- dits[12] = 54.7;
- dits[13] = 26.2181;
- dits[14] = 28;
- dits[15] = 55.2219;
- dits[16] = 26.74;
- dits[17] = 28;
- dits[18] = 57.4;
- dits[19] = 26.74;
- dits[20] = 28;
- gMC->Gsvolu("I093", "PCON", idtmed[272], dits, 21); // SDD cone
-
- dits[0] = 0;
- dits[1] = 50;
- dits[2] = 3;
- dits[3] = 27.35; // 23.7
- dits[4] = 14;
- dits[5] = 18.75;
- dits[6] = 46.7-3;
- dits[7] = 14;
- dits[8] = 18.75;
- dits[9] = 51.45-3;
- dits[10] = 18.75;
- dits[11] = 18.75;
- gMC->Gsvolu("I099", "PCON", idtmed[292], dits, 12); // SDD 3 end-ladder elect.
-
- dits[0] = 0;
- dits[1] = 25;
- dits[2] = 3;
- dits[3] = 34.65;
- dits[4] = 23.4;
- dits[5] = 26.4;
- dits[6] = 56.1-3;
- dits[7] = 23.4;
- dits[8] = 26.4;
- dits[9] = 59.1-3;
- dits[10] = 26.4;
- dits[11] = 26.4;
- gMC->Gsvolu("I200", "PCON", idtmed[292], dits, 12); // SDD 4 end-ladder elect.
-
- dits[0] = 10.065;
- dits[1] = 11;
- dits[2] = 0.25;
- gMC->Gsvolu("I090", "TUBE", idtmed[208], dits, 3);
-
- dits[0] = 10.001;
- dits[1] = 10.065;
- dits[2] = 40;
- gMC->Gsvolu("I089", "TUBE", idtmed[208], dits, 3);
-
- dits[0] = 21.95;
- dits[1] = 24.2;
- dits[2] = 1;
- gMC->Gsvolu("I098", "TUBE", idtmed[204], dits, 3);
-
- dits[0] = 13.1;
- dits[1] = 15.4;
- dits[2] = 1;
- gMC->Gsvolu("I097", "TUBE", idtmed[204], dits, 3);
-
- dits[0] = 1;
- dits[1] = 1;
- dits[2] = 7.74;
- gMC->Gsvolu("I202", "BOX ", idtmed[272], dits, 3);
-
- dits[0] = 1;
- dits[1] = 1;
- dits[2] = 9.14;
- gMC->Gsvolu("I203", "BOX ", idtmed[272], dits, 3);
-
- dits[0] = 21.95;
- dits[1] = 22.95;
- dits[2] = 1;
- gMC->Gsvolu("I095", "TUBE", idtmed[224], dits, 3);
-
- dits[0] = 3;
- dits[1] = 2.7;
- dits[2] = 1;
- dits[3] = 0.63;
- gMC->Gsvolu("I096", "TRD1", idtmed[264], dits, 4);
-
- dits[0] = 13.1;
- dits[1] = 14.1;
- dits[2] = 1;
- gMC->Gsvolu("I094", "TUBE", idtmed[224], dits, 3);
-
-
- // --- Define volumes of SSD cone ----------------------------------
-
-
- dits[0] = 0;
- dits[1] = 360;
- dits[2] = 12;
- dits[3] = -77.2;
- dits[4] = 44.9;
- dits[5] = 47;
- dits[6] = -61.2;
- dits[7] = 28.5;
- dits[8] = 47;
- dits[9] = -57.5;
- dits[10] = 28.5;
- dits[11] = 47;
- dits[12] = -57.5;
- dits[13] = 28.5;
- dits[14] = 43.5;
- dits[15] = -51.365;
- dits[16] = 28.5;
- dits[17] = 43.5;
- dits[18] = -51.365;
- dits[19] = 28.5;
- dits[20] = 36.69;
- dits[21] = 51.3651;
- dits[22] = 28.5;
- dits[23] = 36.69;
- dits[24] = 51.3651;
- dits[25] = 28.5;
- dits[26] = 43.5;
- dits[27] = 56.96;
- dits[28] = 28.5;
- dits[29] = 43.5;
- dits[30] = 56.96;
- dits[31] = 28.5;
- dits[32] = 47;
- dits[33] = 60.66;
- dits[34] = 28.5;
- dits[35] = 47;
- dits[36] = 77.2;
- dits[37] = 44.9;
- dits[38] = 47;
- gMC->Gsvolu("IS01", "PCON", idtmed[204], dits, 39);
-
- dits[0] = 0;
- dits[1] = 360;
- dits[2] = 6;
- dits[3] = -77.2;
- dits[4] = 45;
- dits[5] = 47.5;
- dits[6] = -73.5;
- dits[7] = 45;
- dits[8] = 47.5;
- dits[9] = -72.7819;
- dits[10] = 45;
- dits[11] = 46.2819;
- dits[12] = -59.5;
- dits[13] = 31.2181;
- dits[14] = 33;
- dits[15] = -59.5;
- dits[16] = 28;
- dits[17] = 33;
- dits[18] = -57;
- dits[19] = 28;
- dits[20] = 30.5;
- gMC->Gsvolu("I212", "PCON", idtmed[272], dits, 21); // SSD cone
-
- dits[0] = 28;
- dits[1] = 29.82;
- dits[2] = 0.5;
- gMC->Gsvolu("I211", "TUBE", idtmed[219], dits, 3);
-
- dits[0] = 37.35;
- dits[1] = 38.25;
- dits[2] = 1;
- gMC->Gsvolu("I217", "TUBE", idtmed[224], dits, 3);
-
- dits[0] = 38.25;
- dits[1] = 39.08;
- dits[2] = 1;
- gMC->Gsvolu("I218", "TUBE", idtmed[264], dits, 3);
-
- dits[0] = 41.85;
- dits[1] = 42.75;
- dits[2] = 1;
- gMC->Gsvolu("I219", "TUBE", idtmed[224], dits, 3);
-
- dits[0] = 42.75;
- dits[1] = 43.58;
- dits[2] = 1;
- gMC->Gsvolu("I220", "TUBE", idtmed[264], dits, 3);
-
- dits[0] = 42.1;
- dits[1] = 42.5;
- dits[2] = 1.25;
- gMC->Gsvolu("I214", "TUBE", idtmed[224], dits, 3);
-
- dits[0] = 37.1;
- dits[1] = 37.5;
- dits[2] = 1.25;
- gMC->Gsvolu("I213", "TUBE", idtmed[224], dits, 3);
-
- dits[0] = 0;
- dits[1] = 25;
- dits[2] = 5;
- dits[3] = -77.2+3;
- dits[4] = 44.5;
- dits[5] = 44.5;
- dits[6] = -69.7+3;
- dits[7] = 37;
- dits[8] = 44.5;
- dits[9] = -68.5+3;
- dits[10] = 37;
- dits[11] = 44.5;
- dits[12] = -68.5+4.8;
- dits[13] = 37;
- dits[14] = 44.5;
- dits[15] = -63.5+4.8;
- dits[16] = 37;
- dits[17] = 44.5;
- gMC->Gsvolu("I215", "PCON", idtmed[294], dits, 18); // SSD end-ladder elect.
-
- dits[0] = 0;
- dits[1] = 3.2;
- dits[2] = 9;
- dits[3] = -16.45;
- dits[4] = 30.5;
- dits[5] = 33.5;
- dits[6] = -7.85;
- dits[7] = 30.5;
- dits[8] = 33.5;
- dits[9] = -7.85;
- dits[10] = 30.5;
- dits[11] = 41.85;
- dits[12] = -5.85;
- dits[13] = 30.5;
- dits[14] = 41.85;
- dits[15] = -5.85;
- dits[16] = 30.5;
- dits[17] = 36.5;
- dits[18] = -5;
- dits[19] = 30.5;
- dits[20] = 36.5;
- dits[21] = -2;
- dits[22] = 33.0173;
- dits[23] = 36.5;
- dits[24] = -2;
- dits[25] = 33.0173;
- dits[26] = 37.35;
- dits[27] = 0;
- dits[28] = 34.6955;
- dits[29] = 37.35;
- gMC->Gsvolu("I216", "PCON", idtmed[272], dits, 30);
-
-
- // --- Place SPD (option 'a') volumes into their mother volume IT12
-
- // SPD - option 'a'
- // detector thickness = 100 microns
- // chip thickness = 150 microns
- // (this is NOT the default)
-
- if (option == 1 && thickness == 1) {
+ gMC->Gsvolu("I533", "BOX ", idtmed[203], dits, 3);
- gMC->Gspos("I12A",5,"IT12",0.0,0.0,0.0,idrotm[238],"MANY");
- gMC->Gspos("I12A",6,"IT12",0.0,0.0,0.0,idrotm[236],"MANY");
- gMC->Gspos("I12A",7,"IT12",0.0,0.0,0.0,idrotm[239],"MANY");
- gMC->Gspos("I12A",8,"IT12",0.0,0.0,0.0,idrotm[233],"MANY");
- gMC->Gspos("I12A",9,"IT12",0.0,0.0,0.0,idrotm[240],"MANY");
- gMC->Gspos("I12A",10,"IT12",0.0,0.0,0.0,idrotm[241],"MANY");
- gMC->Gspos("I12A",2,"IT12",0.0,0.0,0.0,idrotm[242],"MANY");
- gMC->Gspos("I12A",3,"IT12",0.0,0.0,0.0,idrotm[234],"MANY");
- gMC->Gspos("I12A",4,"IT12",0.0,0.0,0.0,idrotm[243],"MANY");
- gMC->Gspos("I12A",1,"IT12",0.0,0.0,0.0,0,"MANY");
- gMC->Gspos("I10A",2,"I12A",0.203,3.8206,0.0,idrotm[244],"ONLY");
- gMC->Gspos("I10A",1,"I12A",1.4531,3.8152,0.0,idrotm[245],"ONLY");
- gMC->Gspos("I20A",1,"I12A",3.0174,6.5143,0.0,idrotm[246],"ONLY");
- gMC->Gspos("I20A",2,"I12A",1.9612,6.9062,0.0,idrotm[247],"ONLY");
- gMC->Gspos("I20A",3,"I12A",0.8567,7.1279,0.0,idrotm[248],"ONLY");
- gMC->Gspos("I20A",4,"I12A",-0.2689,7.1742,0.0,idrotm[249],"ONLY");
- gMC->Gspos("I123",2,"I12A",-0.2978,5.5196,0.0,idrotm[214],"ONLY");
- gMC->Gspos("I121",2,"I12A",-0.2385,4.1518,0.0,idrotm[213],"ONLY");
- gMC->Gspos("I122",2,"I12A",-0.2968,4.0207,0.0,idrotm[212],"ONLY");
- gMC->Gspos("I120",2,"I12A",-0.3672,3.9056,0.0,0,"ONLY");
- gMC->Gspos("I144",1,"I12A",-0.2538,3.8556,0.0,0,"ONLY");
- gMC->Gspos("I113",3,"I12A",0.1095,3.9056,0.0,0,"ONLY");
- gMC->Gspos("I143",1,"I12A",0.4365,3.8556,0.0,idrotm[236],"ONLY");
- gMC->Gspos("I142",1,"I12A",0.5136,3.9056,0.0,idrotm[235],"ONLY");
- gMC->Gspos("I141",1,"I12A",0.5636,3.9752,0.0,idrotm[201],"ONLY");
- gMC->Gspos("I140",1,"I12A",0.6336,4.0447,0.0,idrotm[234],"ONLY");
- gMC->Gspos("I139",1,"I12A",0.8297,4.0545,0.0,idrotm[207],"ONLY");
- gMC->Gspos("I113",5,"I12A",1.2575,3.9681,0.0,idrotm[207],"ONLY");
- gMC->Gspos("I138",1,"I12A",1.66,3.7848,0.0,idrotm[207],"ONLY");
- gMC->Gspos("I137",1,"I12A",1.8556,3.7738,0.0,idrotm[233],"ONLY");
- gMC->Gspos("I136",1,"I12A",2.6224,4.874,0.0,idrotm[232],"ONLY");
- gMC->Gspos("I135",1,"I12A",3.2967,6.0337,0.0,idrotm[231],"ONLY");
- gMC->Gspos("I134",1,"I12A",3.266,6.1636,0.0,idrotm[230],"ONLY");
- gMC->Gspos("I113",1,"I12A",2.9903,6.4144,0.0,idrotm[211],"ONLY");
- gMC->Gspos("I133",3,"I12A",2.7631,6.7627,0.0,idrotm[230],"ONLY");
- gMC->Gspos("I132",3,"I12A",2.62,6.8555,0.0,idrotm[229],"ONLY");
- gMC->Gspos("I131",3,"I12A",2.648,6.6023,0.0,idrotm[228],"ONLY");
- gMC->Gspos("I130",3,"I12A",2.6569,6.3431,0.0,idrotm[227],"ONLY");
- gMC->Gspos("I129",3,"I12A",2.3906,6.4819,0.0,idrotm[226],"ONLY");
- gMC->Gspos("I113",2,"I12A",1.9488,6.7998,0.0,idrotm[210],"ONLY");
- gMC->Gspos("I133",2,"I12A",1.6699,7.1085,0.0,idrotm[226],"ONLY");
- gMC->Gspos("I132",2,"I12A",1.5142,7.1777,0.0,idrotm[225],"ONLY");
- gMC->Gspos("I131",2,"I12A",1.5814,6.932,0.0,idrotm[224],"ONLY");
- gMC->Gspos("I130",2,"I12A",1.6308,6.6774,0.0,idrotm[223],"ONLY");
- gMC->Gspos("I129",2,"I12A",1.346,6.7728,0.0,idrotm[222],"ONLY");
- gMC->Gspos("I113",6,"I12A",0.8599,7.0176,0.0,idrotm[209],"ONLY");
- gMC->Gspos("I133",1,"I12A",0.5362,7.2789,0.0,idrotm[222],"ONLY");
- gMC->Gspos("I132",1,"I12A",0.3715,7.3228,0.0,idrotm[221],"ONLY");
- gMC->Gspos("I131",1,"I12A",0.4763,7.0907,0.0,idrotm[220],"ONLY");
- gMC->Gspos("I130",1,"I12A",0.5649,6.8469,0.0,idrotm[219],"ONLY");
- gMC->Gspos("I129",1,"I12A",0.2688,6.8966,0.0,idrotm[218],"ONLY");
- gMC->Gspos("I113",4,"I12A",-0.2497,7.0624,0.0,idrotm[208],"ONLY");
- gMC->Gspos("I128",1,"I12A",-0.6103,7.2698,0.0,idrotm[218],"ONLY");
- gMC->Gspos("I126",2,"I12A",-0.7799,7.2874,0.0,idrotm[217],"ONLY");
- gMC->Gspos("I125",2,"I12A",-0.6315,7.0883,0.0,idrotm[216],"ONLY");
- gMC->Gspos("I124",2,"I12A",-0.4965,6.8742,0.0,idrotm[215],"ONLY");
- gMC->Gspos("I103",3,"I10A",-0.05,0.0075,-3.536,idrotm[237],"ONLY");
- gMC->Gspos("I103",4,"I10A",-0.05,0.0075,-10.708,idrotm[237],"ONLY");
- gMC->Gspos("I103",1,"I10A",-0.05,0.0075,10.708,0,"ONLY");
- gMC->Gspos("I103",2,"I10A",-0.05,0.0075,3.536,0,"ONLY");
- gMC->Gspos("I105",1,"I10A",-0.05,0.01,-16.844,idrotm[237],"ONLY");
- gMC->Gspos("I105",2,"I10A",-0.05,0.01,16.844,0,"ONLY");
- gMC->Gspos("I104",1,"I10A",0.0,-0.015,0.0,0,"ONLY");
- gMC->Gspos("I1D3",3,"I20A",-0.05,0.0075,-3.536,idrotm[237],"ONLY");
- gMC->Gspos("I1D3",4,"I20A",-0.05,0.0075,-10.708,idrotm[237],"ONLY");
- gMC->Gspos("I1D3",1,"I20A",-0.05,0.0075,10.708,0,"ONLY");
- gMC->Gspos("I1D3",2,"I20A",-0.05,0.0075,3.536,0,"ONLY");
- gMC->Gspos("I105",3,"I20A",-0.05,0.01,-16.844,idrotm[237],"ONLY");
- gMC->Gspos("I105",4,"I20A",-0.05,0.01,16.844,0,"ONLY");
- gMC->Gspos("I104",2,"I20A",0.0,-0.015,0.0,0,"ONLY");
- gMC->Gspos("I112",2,"I113",0.25,0.02,0.0,idrotm[206],"ONLY");
- gMC->Gspos("I111",2,"I113",0.1318,-0.0008,0.0,idrotm[205],"ONLY");
- gMC->Gspos("I118",1,"I113",0.0,-0.0454,0.0,0,"ONLY");
- gMC->Gspos("I110",1,"I113",0.0,0.0492,0.0,0,"ONLY");
- gMC->Gspos("I114",1,"I113",0.063,0.0042,0.0,idrotm[202],"ONLY");
- gMC->Gspos("I115",1,"I113",0.063,0.0042,0.0,idrotm[202],"ONLY");
- gMC->Gspos("I115",2,"I113",-0.063,0.0042,0.0,idrotm[201],"ONLY");
- gMC->Gspos("I114",2,"I113",-0.063,0.0042,0.0,idrotm[201],"ONLY");
- gMC->Gspos("I116",1,"I113",0.0,0.0042,0.0,0,"ONLY");
- gMC->Gspos("I111",1,"I113",-0.1318,-0.0008,0.0,idrotm[204],"ONLY");
- gMC->Gspos("I112",1,"I113",-0.25,0.02,0.0,idrotm[203],"ONLY");
- gMC->Gspos("I101",1,"I103",-0.088,0.0075,0.0,0,"ONLY");
- gMC->Gspos("I102",1,"I103",0.0,-0.005,-2.8,0,"ONLY");
- gMC->Gspos("I102",2,"I103",0.0,-0.005,-1.4,0,"ONLY");
- gMC->Gspos("I102",3,"I103",0.0,-0.005,0.0,0,"ONLY");
- gMC->Gspos("I102",4,"I103",0.0,-0.005,1.4,0,"ONLY");
- gMC->Gspos("I102",5,"I103",0.0,-0.005,2.8,0,"ONLY");
- gMC->Gspos("I1D1",1,"I1D3",-0.088,0.0075,0.0,0,"ONLY");
- gMC->Gspos("I102",6,"I1D3",0.0,-0.005,-2.8,0,"ONLY");
- gMC->Gspos("I102",7,"I1D3",0.0,-0.005,-1.4,0,"ONLY");
- gMC->Gspos("I102",8,"I1D3",0.0,-0.005,0.0,0,"ONLY");
- gMC->Gspos("I102",9,"I1D3",0.0,-0.005,1.4,0,"ONLY");
- gMC->Gspos("I102",10,"I1D3",0.0,-0.005,2.8,0,"ONLY");
- gMC->Gspos("I117",1,"I116",0.0,0.0,0.0,0,"ONLY");
- gMC->Gspos("ITS1",1,"I101",0.0,0.0,0.0,0,"ONLY");
- gMC->Gspos("ITS2",1,"I1D1",0.0,0.0,0.0,0,"ONLY");
- gMC->Gspos("I650",16,"IT12",0.0,0.0,22.0,idrotm[1104],"MANY");
- gMC->Gspos("I650",20,"IT12",0.0,0.0,22.0,idrotm[1130],"MANY");
- gMC->Gspos("I650",18,"IT12",0.0,0.0,22.0,idrotm[1117],"MANY");
- gMC->Gspos("I650",1,"IT12",0.0,0.0,22.0,0,"MANY");
- gMC->Gspos("I650",4,"IT12",0.0,0.0,22.0,idrotm[1106],"MANY");
- gMC->Gspos("I650",6,"IT12",0.0,0.0,22.0,idrotm[1039],"MANY");
- gMC->Gspos("I650",8,"IT12",0.0,0.0,22.0,idrotm[1107],"MANY");
- gMC->Gspos("I650",10,"IT12",0.0,0.0,22.0,idrotm[1065],"MANY");
- gMC->Gspos("I650",12,"IT12",0.0,0.0,22.0,idrotm[1078],"MANY");
- gMC->Gspos("I650",14,"IT12",0.0,0.0,22.0,idrotm[1091],"MANY");
- gMC->Gspos("I650",19,"IT12",0.0,0.0,-22.0,idrotm[1108],"MANY");
- gMC->Gspos("I650",2,"IT12",0.0,0.0,-22.0,idrotm[1109],"MANY");
- gMC->Gspos("I650",3,"IT12",0.0,0.0,-22.0,idrotm[1110],"MANY");
- gMC->Gspos("I650",5,"IT12",0.0,0.0,-22.0,idrotm[1111],"MANY");
- gMC->Gspos("I650",7,"IT12",0.0,0.0,-22.0,idrotm[1112],"MANY");
- gMC->Gspos("I650",9,"IT12",0.0,0.0,-22.0,idrotm[1113],"MANY");
- gMC->Gspos("I650",11,"IT12",0.0,0.0,-22.0,idrotm[1114],"MANY");
- gMC->Gspos("I650",13,"IT12",0.0,0.0,-22.0,idrotm[1115],"MANY");
- gMC->Gspos("I650",15,"IT12",0.0,0.0,-22.0,idrotm[1116],"MANY");
- gMC->Gspos("I650",17,"IT12",0.0,0.0,-22.0,idrotm[1118],"MANY");
- gMC->Gspos("I666",1,"I650",0.0,0.0,0.25,idrotm[1003],"MANY");
- gMC->Gspos("I667",1,"I650",0.1102,0.9945,0.45,idrotm[1088],"ONLY");
- gMC->Gspos("I669",3,"I650",0.1883,4.0372,-3.2,0,"ONLY");
- gMC->Gspos("I671",3,"I650",0.1883,4.0372,0.6,0,"ONLY");
- gMC->Gspos("I669",2,"I650",1.3343,4.0609,-3.2,0,"ONLY");
- gMC->Gspos("I671",2,"I650",1.3343,4.0609,0.6,0,"ONLY");
- gMC->Gspos("I669",6,"I650",2.9567,6.1959,-3.2,idrotm[1089],"ONLY");
- gMC->Gspos("I671",6,"I650",2.9567,6.1959,0.6,idrotm[1089],"ONLY");
- gMC->Gspos("I669",5,"I650",1.9511,6.5822,-3.2,idrotm[1011],"ONLY");
- gMC->Gspos("I671",5,"I650",1.9511,6.5822,0.6,idrotm[1011],"ONLY");
- gMC->Gspos("I669",4,"I650",0.8974,6.8064,-3.2,idrotm[1090],"ONLY");
- gMC->Gspos("I671",4,"I650",0.8974,6.8064,0.6,idrotm[1090],"ONLY");
- gMC->Gspos("I669",1,"I650",-0.1784,6.863,-3.2,0,"ONLY");
- gMC->Gspos("I671",1,"I650",-0.1784,6.863,0.6,0,"ONLY");
- gMC->Gspos("I673",1,"I650",0.2173,4.8037,1.8,0,"ONLY");
- gMC->Gspos("I673",6,"I650",1.5093,4.5605,1.8,0,"ONLY");
- gMC->Gspos("I673",4,"I650",-0.173,6.2531,1.8,idrotm[1092],"ONLY");
- gMC->Gspos("I673",3,"I650",0.8073,6.2032,1.8,idrotm[1093],"ONLY");
- gMC->Gspos("I673",2,"I650",1.7678,6.0005,1.8,idrotm[1094],"ONLY");
- gMC->Gspos("I673",5,"I650",2.6847,5.6501,1.8,0,"ONLY");
- gMC->Gspos("I676",2,"I650",1.7618,5.2269,2.5,0,"ONLY");
- gMC->Gspos("I676",1,"I650",0.4018,5.5869,2.5,0,"ONLY");
- gMC->Gspos("I668",1,"I667",0.0,0.0,0.0,0,"ONLY");
- gMC->Gspos("I670",1,"I669",0.0,0.0,0.0,0,"ONLY");
- gMC->Gspos("I672",1,"I671",0.0,0.0,0.0,0,"ONLY");
- gMC->Gspos("I674",1,"I673",0.0,0.0,0.0,0,"MANY");
- gMC->Gspos("I675",1,"I673",0.0,0.0,-0.5,0,"ONLY");
- gMC->Gspos("I677",1,"I676",0.0,0.0,0.0,0,"MANY");
- gMC->Gspos("I678",1,"I676",0.0,0.0,-0.95,0,"ONLY");
+ dits[0] = 3.65;
+ dits[1] = 0.015;
+ dits[2] = 2;
+ gMC->Gsvolu("ITS5", "BOX ", idtmed[200], dits, 3);
- }
- // --- Place SPD (option 'b') volumes into their mother volume IT12
-
- // SPD - option 'b'
- // detector thickness = 100 microns
- // chip thickness = 150 microns
- // (this is NOT the default)
+ // --- Define volumes of shield of SPD ----------------
- if (option == 2 && thickness == 1) {
-
- gMC->Gspos("I12B",1,"IT12",0.0,0.0,0.0,0,"MANY");
- gMC->Gspos("I12B",8,"IT12",0.0,0.0,0.0,idrotm[233],"MANY");
- gMC->Gspos("I12B",7,"IT12",0.0,0.0,0.0,idrotm[244],"MANY");
- gMC->Gspos("I12B",6,"IT12",0.0,0.0,0.0,idrotm[236],"MANY");
- gMC->Gspos("I12B",2,"IT12",0.0,0.0,0.0,idrotm[245],"MANY");
- gMC->Gspos("I12B",3,"IT12",0.0,0.0,0.0,idrotm[234],"MANY");
- gMC->Gspos("I12B",4,"IT12",0.0,0.0,0.0,idrotm[246],"MANY");
- gMC->Gspos("I12B",5,"IT12",0.0,0.0,0.0,idrotm[247],"MANY");
- gMC->Gspos("I12B",9,"IT12",0.0,0.0,0.0,idrotm[248],"MANY");
- gMC->Gspos("I12B",10,"IT12",0.0,0.0,0.0,idrotm[249],"MANY");
- gMC->Gspos("I10B",2,"I12B",0.203,3.8206,0.0,idrotm[238],"ONLY");
- gMC->Gspos("I10B",1,"I12B",1.4531,3.8152,0.0,idrotm[239],"ONLY");
- gMC->Gspos("I20B",1,"I12B",3.0174,6.5143,0.0,idrotm[240],"ONLY");
- gMC->Gspos("I20B",2,"I12B",1.9612,6.9062,0.0,idrotm[241],"ONLY");
- gMC->Gspos("I20B",3,"I12B",0.8567,7.1279,0.0,idrotm[242],"ONLY");
- gMC->Gspos("I20B",4,"I12B",-0.2689,7.1742,0.0,idrotm[243],"ONLY");
- gMC->Gspos("I123",1,"I12B",-0.2978,5.5196,0.0,idrotm[214],"ONLY");
- gMC->Gspos("I121",1,"I12B",-0.2385,4.1518,0.0,idrotm[213],"ONLY");
- gMC->Gspos("I122",1,"I12B",-0.2968,4.0207,0.0,idrotm[212],"ONLY");
- gMC->Gspos("I120",1,"I12B",-0.3672,3.9056,0.0,0,"ONLY");
- gMC->Gspos("I144",1,"I12B",-0.2538,3.8556,0.0,0,"ONLY");
- gMC->Gspos("I113",3,"I12B",0.1095,3.9056,0.0,0,"ONLY");
- gMC->Gspos("I143",1,"I12B",0.4365,3.8556,0.0,idrotm[236],"ONLY");
- gMC->Gspos("I142",1,"I12B",0.5136,3.9056,0.0,idrotm[235],"ONLY");
- gMC->Gspos("I141",1,"I12B",0.5636,3.9752,0.0,idrotm[237],"ONLY");
- gMC->Gspos("I140",1,"I12B",0.6336,4.0447,0.0,idrotm[234],"ONLY");
- gMC->Gspos("I139",1,"I12B",0.8297,4.0545,0.0,idrotm[207],"ONLY");
- gMC->Gspos("I113",5,"I12B",1.2575,3.9681,0.0,idrotm[207],"ONLY");
- gMC->Gspos("I138",1,"I12B",1.66,3.7848,0.0,idrotm[207],"ONLY");
- gMC->Gspos("I137",1,"I12B",1.8556,3.7738,0.0,idrotm[233],"ONLY");
- gMC->Gspos("I136",1,"I12B",2.6224,4.874,0.0,idrotm[232],"ONLY");
- gMC->Gspos("I135",1,"I12B",3.2967,6.0337,0.0,idrotm[231],"ONLY");
- gMC->Gspos("I134",1,"I12B",3.266,6.1636,0.0,idrotm[230],"ONLY");
- gMC->Gspos("I113",1,"I12B",2.9903,6.4144,0.0,idrotm[211],"ONLY");
- gMC->Gspos("I133",3,"I12B",2.7631,6.7627,0.0,idrotm[230],"ONLY");
- gMC->Gspos("I132",3,"I12B",2.62,6.8555,0.0,idrotm[229],"ONLY");
- gMC->Gspos("I131",3,"I12B",2.648,6.6023,0.0,idrotm[228],"ONLY");
- gMC->Gspos("I130",3,"I12B",2.6569,6.3431,0.0,idrotm[227],"ONLY");
- gMC->Gspos("I129",3,"I12B",2.3906,6.4819,0.0,idrotm[226],"ONLY");
- gMC->Gspos("I113",2,"I12B",1.9488,6.7998,0.0,idrotm[210],"ONLY");
- gMC->Gspos("I133",2,"I12B",1.6699,7.1085,0.0,idrotm[226],"ONLY");
- gMC->Gspos("I132",2,"I12B",1.5142,7.1777,0.0,idrotm[225],"ONLY");
- gMC->Gspos("I131",2,"I12B",1.5814,6.932,0.0,idrotm[224],"ONLY");
- gMC->Gspos("I130",2,"I12B",1.6308,6.6774,0.0,idrotm[223],"ONLY");
- gMC->Gspos("I129",2,"I12B",1.346,6.7728,0.0,idrotm[222],"ONLY");
- gMC->Gspos("I113",6,"I12B",0.8599,7.0176,0.0,idrotm[209],"ONLY");
- gMC->Gspos("I133",1,"I12B",0.5362,7.2789,0.0,idrotm[222],"ONLY");
- gMC->Gspos("I132",1,"I12B",0.3715,7.3228,0.0,idrotm[221],"ONLY");
- gMC->Gspos("I131",1,"I12B",0.4763,7.0907,0.0,idrotm[220],"ONLY");
- gMC->Gspos("I130",1,"I12B",0.5649,6.8469,0.0,idrotm[219],"ONLY");
- gMC->Gspos("I129",1,"I12B",0.2688,6.8966,0.0,idrotm[218],"ONLY");
- gMC->Gspos("I113",4,"I12B",-0.2497,7.0624,0.0,idrotm[208],"ONLY");
- gMC->Gspos("I128",1,"I12B",-0.6103,7.2698,0.0,idrotm[218],"ONLY");
- gMC->Gspos("I126",1,"I12B",-0.7799,7.2874,0.0,idrotm[217],"ONLY");
- gMC->Gspos("I125",1,"I12B",-0.6315,7.0883,0.0,idrotm[216],"ONLY");
- gMC->Gspos("I124",1,"I12B",-0.4965,6.8742,0.0,idrotm[215],"ONLY");
- gMC->Gspos("I105",3,"I10B",-0.05,-0.01,-16.844,idrotm[201],"ONLY");
- gMC->Gspos("I105",4,"I10B",-0.05,-0.01,16.844,0,"ONLY");
- gMC->Gspos("I107",2,"I10B",-0.0455,-0.0125,3.536,0,"ONLY");
- gMC->Gspos("I107",1,"I10B",-0.0455,-0.0125,10.708,0,"ONLY");
- gMC->Gspos("I107",4,"I10B",-0.0455,-0.0125,-10.708,idrotm[201],"ONLY");
- gMC->Gspos("I107",3,"I10B",-0.0455,-0.0125,-3.536,idrotm[201],"ONLY");
- gMC->Gspos("I109",1,"I10B",-0.138,0.015,-16.844,idrotm[201],"ONLY");
- gMC->Gspos("I109",2,"I10B",-0.138,0.015,16.844,0,"ONLY");
- gMC->Gspos("I108",1,"I10B",-0.138,0.01,0.0,0,"ONLY");
- gMC->Gspos("I105",1,"I20B",-0.05,-0.01,-16.844,idrotm[201],"ONLY");
- gMC->Gspos("I105",2,"I20B",-0.05,-0.01,16.844,0,"ONLY");
- gMC->Gspos("I1D7",2,"I20B",-0.0455,-0.0125,3.536,0,"ONLY");
- gMC->Gspos("I1D7",1,"I20B",-0.0455,-0.0125,10.708,0,"ONLY");
- gMC->Gspos("I1D7",4,"I20B",-0.0455,-0.0125,-10.708,idrotm[201],"ONLY");
- gMC->Gspos("I1D7",3,"I20B",-0.0455,-0.0125,-3.536,idrotm[201],"ONLY");
- gMC->Gspos("I109",3,"I20B",-0.138,0.015,-16.844,idrotm[201],"ONLY");
- gMC->Gspos("I109",4,"I20B",-0.138,0.015,16.844,0,"ONLY");
- gMC->Gspos("I108",2,"I20B",-0.138,0.01,0.0,0,"ONLY");
- gMC->Gspos("I112",2,"I113",0.25,0.02,0.0,idrotm[206],"ONLY");
- gMC->Gspos("I111",2,"I113",0.1318,-0.0008,0.0,idrotm[205],"ONLY");
- gMC->Gspos("I118",1,"I113",0.0,-0.0454,0.0,0,"ONLY");
- gMC->Gspos("I110",1,"I113",0.0,0.0492,0.0,0,"ONLY");
- gMC->Gspos("I114",1,"I113",0.063,0.0042,0.0,idrotm[202],"ONLY");
- gMC->Gspos("I115",1,"I113",0.063,0.0042,0.0,idrotm[202],"ONLY");
- gMC->Gspos("I115",2,"I113",-0.063,0.0042,0.0,idrotm[237],"ONLY");
- gMC->Gspos("I114",2,"I113",-0.063,0.0042,0.0,idrotm[237],"ONLY");
- gMC->Gspos("I116",1,"I113",0.0,0.0042,0.0,0,"ONLY");
- gMC->Gspos("I111",1,"I113",-0.1318,-0.0008,0.0,idrotm[204],"ONLY");
- gMC->Gspos("I112",1,"I113",-0.25,0.02,0.0,idrotm[203],"ONLY");
- gMC->Gspos("I106",1,"I107",0.0,-0.005,-1.4,0,"ONLY");
- gMC->Gspos("I106",2,"I107",0.0,-0.005,0.0,0,"ONLY");
- gMC->Gspos("I106",3,"I107",0.0,-0.005,1.4,0,"ONLY");
- gMC->Gspos("I106",4,"I107",0.0,-0.005,2.8,0,"ONLY");
- gMC->Gspos("I106",5,"I107",0.0,-0.005,-2.8,0,"ONLY");
- gMC->Gspos("I101",1,"I107",0.0,0.0075,0.0,0,"ONLY");
- gMC->Gspos("I106",6,"I1D7",0.0,-0.005,-1.4,0,"ONLY");
- gMC->Gspos("I106",7,"I1D7",0.0,-0.005,0.0,0,"ONLY");
- gMC->Gspos("I106",8,"I1D7",0.0,-0.005,1.4,0,"ONLY");
- gMC->Gspos("I106",9,"I1D7",0.0,-0.005,2.8,0,"ONLY");
- gMC->Gspos("I106",10,"I1D7",0.0,-0.005,-2.8,0,"ONLY");
- gMC->Gspos("I1D1",1,"I1D7",0.0,0.0075,0.0,0,"ONLY");
- gMC->Gspos("I117",1,"I116",0.0,0.0,0.0,0,"ONLY");
- gMC->Gspos("ITS1",1,"I101",0.0,0.0,0.0,0,"ONLY");
- gMC->Gspos("ITS2",1,"I1D1",0.0,0.0,0.0,0,"ONLY");
- gMC->Gspos("I650",16,"IT12",0.0,0.0,22.0,idrotm[1104],"MANY");
- gMC->Gspos("I650",20,"IT12",0.0,0.0,22.0,idrotm[1130],"MANY");
- gMC->Gspos("I650",18,"IT12",0.0,0.0,22.0,idrotm[1117],"MANY");
- gMC->Gspos("I650",1,"IT12",0.0,0.0,22.0,0,"MANY");
- gMC->Gspos("I650",4,"IT12",0.0,0.0,22.0,idrotm[1106],"MANY");
- gMC->Gspos("I650",6,"IT12",0.0,0.0,22.0,idrotm[1039],"MANY");
- gMC->Gspos("I650",8,"IT12",0.0,0.0,22.0,idrotm[1107],"MANY");
- gMC->Gspos("I650",10,"IT12",0.0,0.0,22.0,idrotm[1065],"MANY");
- gMC->Gspos("I650",12,"IT12",0.0,0.0,22.0,idrotm[1078],"MANY");
- gMC->Gspos("I650",14,"IT12",0.0,0.0,22.0,idrotm[1091],"MANY");
- gMC->Gspos("I650",19,"IT12",0.0,0.0,-22.0,idrotm[1108],"MANY");
- gMC->Gspos("I650",2,"IT12",0.0,0.0,-22.0,idrotm[1109],"MANY");
- gMC->Gspos("I650",3,"IT12",0.0,0.0,-22.0,idrotm[1110],"MANY");
- gMC->Gspos("I650",5,"IT12",0.0,0.0,-22.0,idrotm[1111],"MANY");
- gMC->Gspos("I650",7,"IT12",0.0,0.0,-22.0,idrotm[1112],"MANY");
- gMC->Gspos("I650",9,"IT12",0.0,0.0,-22.0,idrotm[1113],"MANY");
- gMC->Gspos("I650",11,"IT12",0.0,0.0,-22.0,idrotm[1114],"MANY");
- gMC->Gspos("I650",13,"IT12",0.0,0.0,-22.0,idrotm[1115],"MANY");
- gMC->Gspos("I650",15,"IT12",0.0,0.0,-22.0,idrotm[1116],"MANY");
- gMC->Gspos("I650",17,"IT12",0.0,0.0,-22.0,idrotm[1118],"MANY");
- gMC->Gspos("I666",1,"I650",0.0,0.0,0.25,idrotm[1003],"MANY");
- gMC->Gspos("I667",1,"I650",0.1102,0.9945,0.45,idrotm[1088],"ONLY");
- gMC->Gspos("I669",3,"I650",0.1883,4.0372,-3.2,0,"ONLY");
- gMC->Gspos("I671",3,"I650",0.1883,4.0372,0.6,0,"ONLY");
- gMC->Gspos("I669",2,"I650",1.3343,4.0609,-3.2,0,"ONLY");
- gMC->Gspos("I671",2,"I650",1.3343,4.0609,0.6,0,"ONLY");
- gMC->Gspos("I669",6,"I650",2.9567,6.1959,-3.2,idrotm[1089],"ONLY");
- gMC->Gspos("I671",6,"I650",2.9567,6.1959,0.6,idrotm[1089],"ONLY");
- gMC->Gspos("I669",5,"I650",1.9511,6.5822,-3.2,idrotm[1011],"ONLY");
- gMC->Gspos("I671",5,"I650",1.9511,6.5822,0.6,idrotm[1011],"ONLY");
- gMC->Gspos("I669",4,"I650",0.8974,6.8064,-3.2,idrotm[1090],"ONLY");
- gMC->Gspos("I671",4,"I650",0.8974,6.8064,0.6,idrotm[1090],"ONLY");
- gMC->Gspos("I669",1,"I650",-0.1784,6.863,-3.2,0,"ONLY");
- gMC->Gspos("I671",1,"I650",-0.1784,6.863,0.6,0,"ONLY");
- gMC->Gspos("I673",1,"I650",0.2173,4.8037,1.8,0,"ONLY");
- gMC->Gspos("I673",6,"I650",1.5093,4.5605,1.8,0,"ONLY");
- gMC->Gspos("I673",4,"I650",-0.173,6.2531,1.8,idrotm[1092],"ONLY");
- gMC->Gspos("I673",3,"I650",0.8073,6.2032,1.8,idrotm[1093],"ONLY");
- gMC->Gspos("I673",2,"I650",1.7678,6.0005,1.8,idrotm[1094],"ONLY");
- gMC->Gspos("I673",5,"I650",2.6847,5.6501,1.8,0,"ONLY");
- gMC->Gspos("I676",2,"I650",1.7618,5.2269,2.5,0,"ONLY");
- gMC->Gspos("I676",1,"I650",0.4018,5.5869,2.5,0,"ONLY");
- gMC->Gspos("I668",1,"I667",0.0,0.0,0.0,0,"ONLY");
- gMC->Gspos("I670",1,"I669",0.0,0.0,0.0,0,"ONLY");
- gMC->Gspos("I672",1,"I671",0.0,0.0,0.0,0,"ONLY");
- gMC->Gspos("I674",1,"I673",0.0,0.0,0.0,0,"MANY");
- gMC->Gspos("I675",1,"I673",0.0,0.0,-0.5,0,"ONLY");
- gMC->Gspos("I677",1,"I676",0.0,0.0,0.0,0,"MANY");
- gMC->Gspos("I678",1,"I676",0.0,0.0,-0.95,0,"ONLY");
- }
+ dits[0] = 8.37;
+ dits[1] = 9.93;
+ dits[2] = 25;
+ gMC->Gsvolu("IC01", "TUBE", idtmed[289], dits, 3);
+
+ dits[0] = 8.3;
+ dits[1] = 9.995;
+ dits[2] = 17.5/2.;
+ gMC->Gsvolu("IC02", "TUBE", idtmed[289], dits, 3);
+
+
+ // --- Define volume of first cylinder between SPD and SDD --------------
+
+ dits[0] = (21.-0.128)/2.;
+ dits[1] = 21./2.;
+ dits[2] = 39.4;
+ gMC->Gsvolu("ICY1", "TUBE", idtmed[208], dits, 3);
+
+ // --- Define volume of second cylinder between SDD and SSD --------------
+
+ dits[0] = (59.5-0.128)/2.;
+ dits[1] = 59.5/2.;
+ dits[2] = 56.2; // was 57
+ gMC->Gsvolu("ICY2", "TUBE", idtmed[208], dits, 3);
+
+ // --- Define volumes of SDD cone ----------------------------------
+
+ dits[0] = 0;
+ dits[1] = 360;
+ dits[2] = 12;
+ dits[3] = -59.7;
+ dits[4] = 27;
+ dits[5] = 28.6;
+ dits[6] = -42.7;
+ dits[7] = 10;
+ dits[8] = 28.6;
+ dits[9] = -34.65;
+ dits[10] = 10;
+ dits[11] = 28.6;
+ dits[12] = -34.65;
+ dits[13] = 10;
+ dits[14] = 23.495;
+ dits[15] = -23.7;
+ dits[16] = 10;
+ dits[17] = 23.495;
+ dits[18] = -23.7;
+ dits[19] = 10;
+ dits[20] = 14.595;
+ dits[21] = 23.7;
+ dits[22] = 10;
+ dits[23] = 14.595;
+ dits[24] = 23.7;
+ dits[25] = 10;
+ dits[26] = 23.495;
+ dits[27] = 34.65;
+ dits[28] = 10;
+ dits[29] = 23.495;
+ dits[30] = 34.65;
+ dits[31] = 10;
+ dits[32] = 28.6;
+ dits[33] = 42.7;
+ dits[34] = 10;
+ dits[35] = 28.6;
+ dits[36] = 59.7;
+ dits[37] = 27.2637;
+ dits[38] = 28.6;
+ gMC->Gsvolu("IS02", "PCON", idtmed[204], dits, 39);
+
+ dits[0] = 0;
+ dits[1] = 360;
+ dits[2] = 6;
+ dits[3] = 38.65;
+ dits[4] = 10.75;
+ dits[5] = 12.25;
+ dits[6] = 40.15;
+ dits[7] = 10.75;
+ dits[8] = 13.96;
+ dits[9] = 40.15;
+ dits[10] = 12.46;
+ dits[11] = 13.96;
+ dits[12] = 55.75;
+ dits[13] = 27;
+ dits[14] = 28.5;
+ dits[15] = 55.75;
+ dits[16] = 27;
+ dits[17] = 28.5;
+ dits[18] = 57.25;
+ dits[19] = 27;
+ dits[20] = 28.5;
+ gMC->Gsvolu("I093", "PCON", idtmed[272], dits, 21); // SDD cone
+
+ dits[0] = 0;
+ dits[1] = 50;
+ dits[2] = 3;
+ dits[3] = 39;
+ dits[4] = 14;
+ dits[5] = 18.75;
+ dits[6] = 46.7-3;
+ dits[7] = 14;
+ dits[8] = 18.75;
+ dits[9] = 51.45-3;
+ dits[10] = 18.75;
+ dits[11] = 18.75;
+ gMC->Gsvolu("I099", "PCON", idtmed[204], dits, 12); // SDD 3 cone hole
+
+ dits[0] = 0;
+ dits[1] = 25;
+ dits[2] = 3;
+ dits[3] = 49;
+ dits[4] = 23.4;
+ dits[5] = 26.4;
+ dits[6] = 56.1-3;
+ dits[7] = 23.4;
+ dits[8] = 26.4;
+ dits[9] = 59.1-3;
+ dits[10] = 26.4;
+ dits[11] = 26.4;
+ gMC->Gsvolu("I200", "PCON", idtmed[204], dits, 12); // SDD 4 cone hole
+
+ dits[0] = 10.0;
+ dits[1] = 10.5;
+ dits[2] = 0.25;
+ gMC->Gsvolu("I090", "TUBE", idtmed[224], dits, 3); // SDD cylinder flange
+
+ dits[0] = 21.95;
+ dits[1] = 22.95;
+ dits[2] = 1;
+ gMC->Gsvolu("I098", "TUBE", idtmed[283], dits, 3); // ladder support on layer 4
+
+ dits[0] = 13.1;
+ dits[1] = 14.1;
+ dits[2] = 1;
+ gMC->Gsvolu("I097", "TUBE", idtmed[283], dits, 3); // ladder support on layer 3
+
+ dits[0] = 1;
+ dits[1] = 1;
+ dits[2] = 7.74;
+ gMC->Gsvolu("I202", "BOX ", idtmed[272], dits, 3);
+
+ dits[0] = 1;
+ dits[1] = 1;
+ dits[2] = 9.14;
+ gMC->Gsvolu("I203", "BOX ", idtmed[272], dits, 3);
+
+ dits[0] = 21.95;
+ dits[1] = 22.95;
+ dits[2] = 1;
+ gMC->Gsvolu("I095", "TUBE", idtmed[224], dits, 3);
+
+ dits[0] = 3;
+ dits[1] = 2.7;
+ dits[2] = 1;
+ dits[3] = 0.63;
+ gMC->Gsvolu("I096", "TRD1", idtmed[264], dits, 4);
+
+ dits[0] = 13.1;
+ dits[1] = 14.1;
+ dits[2] = 1;
+ gMC->Gsvolu("I094", "TUBE", idtmed[224], dits, 3);
+
+
+ // --- Define volumes of SSD cone ----------------------------------
+
+ dits[0] = 0;
+ dits[1] = 360;
+ dits[2] = 12;
+ dits[3] = -zmax;
+ dits[4] = 46;
+ dits[5] = 49.25;
+ dits[6] = -61.2;
+ dits[7] = 28.7;
+ dits[8] = 49.25;
+ dits[9] = -57.5;
+ dits[10] = 28.7;
+ dits[11] = 49.25;
+ dits[12] = -57.5;
+ dits[13] = 28.7;
+ dits[14] = 43.5;
+ dits[15] = -49.2;
+ dits[16] = 28.7;
+ dits[17] = 43.5;
+ dits[18] = -49.2;
+ dits[19] = 28.7;
+ dits[20] = 36.85;
+ dits[21] = 50.6;
+ dits[22] = 28.7;
+ dits[23] = 36.85;
+ dits[24] = 50.6;
+ dits[25] = 28.7;
+ dits[26] = 43.5;
+ dits[27] = 57.5;
+ dits[28] = 28.7;
+ dits[29] = 43.5;
+ dits[30] = 57.5;
+ dits[31] = 28.7;
+ dits[32] = 49.25;
+ dits[33] = 61.2;
+ dits[34] = 28.7;
+ dits[35] = 49.25;
+ dits[36] = zmax;
+ dits[37] = 46;
+ dits[38] = 49.25;
+ gMC->Gsvolu("IS01", "PCON", idtmed[204], dits, 39); // SSD cone mother volume
+
+ dits[0] = 0;
+ dits[1] = 360;
+ dits[2] = 6;
+ dits[3] = -zmax;
+ dits[4] = 47.75;
+ dits[5] = 49.25;
+ dits[6] = -zmax+2.;
+ dits[7] = 47.75;
+ dits[8] = 49.25;
+ dits[9] = -71.2819;
+ dits[10] = 46.75;
+ dits[11] = 49.0319;
+ dits[12] = -57.25; // was 58.5
+ dits[13] = 32.9681;
+ dits[14] = 34.75;
+ dits[15] = -57.25; // was 58.5
+ dits[16] = 30;
+ dits[17] = 34.75;
+ dits[18] = -55.75; // was 57
+ dits[19] = 30;
+ dits[20] = 32.25; // was 31.5
+ gMC->Gsvolu("I212", "PCON", idtmed[272], dits, 21); // SSD cone
+
+ dits[0] = 28.75;
+ dits[1] = 29.75;
+ dits[2] = 0.5;
+ gMC->Gsvolu("I211", "TUBE", idtmed[224], dits, 3); // SSD cylinder flange
+
+ dits[0] = 35.8;
+ dits[1] = 36.8;
+ dits[2] = 1;
+ gMC->Gsvolu("I217", "TUBE", idtmed[283], dits, 3); // ladder support on layer 5
+
+ dits[0] = 41.4;
+ dits[1] = 42.4;
+ dits[2] = 1;
+ gMC->Gsvolu("I219", "TUBE", idtmed[283], dits, 3); // ladder support on layer 6
+
+ dits[0] = 42.05+5.;
+ dits[1] = 42.55+5.;
+ dits[2] = 1.25;
+ gMC->Gsvolu("I214", "TUBE", idtmed[224], dits, 3); // layer 6 electronic support
+ // this will change after PPR
+ dits[0] = 37.05+5.;
+ dits[1] = 37.55+5.;
+ dits[2] = 1.25;
+ gMC->Gsvolu("I213", "TUBE", idtmed[224], dits, 3); // layer 5 electronic support
+ // this will change after PPR
+ dits[0] = 0;
+ dits[1] = 25;
+ dits[2] = 5;
+ dits[3] = -zmax+3;
+ dits[4] = 45.5;
+ dits[5] = 45.5;
+ dits[6] = -69.7+3;
+ dits[7] = 37;
+ dits[8] = 45.5;
+ dits[9] = -68.5+3;
+ dits[10] = 37;
+ dits[11] = 45.5;
+ dits[12] = -68.5+4.8;
+ dits[13] = 37;
+ dits[14] = 45.5;
+ dits[15] = -63.5+4.8;
+ dits[16] = 37;
+ dits[17] = 45.5;
+ gMC->Gsvolu("I215", "PCON", idtmed[204], dits, 18); // SSD cone hole
+
+ dits[0] = 0;
+ dits[1] = 3.2;
+ dits[2] = 9;
+ dits[3] = -14;
+ dits[4] = 30.5;
+ dits[5] = 33.5;
+ dits[6] = -9.85;
+ dits[7] = 30.5;
+ dits[8] = 33.5;
+ dits[9] = -9.85;
+ dits[10] = 30.5;
+ dits[11] = 43.45;
+ dits[12] = -7.85;
+ dits[13] = 30.5;
+ dits[14] = 43.45;
+ dits[15] = -7.85;
+ dits[16] = 30.5;
+ dits[17] = 36.5;
+ dits[18] = -7;
+ dits[19] = 30.5;
+ dits[20] = 36.5;
+ dits[21] = -4;
+ dits[22] = 33.0173;
+ dits[23] = 36.5;
+ dits[24] = -4;
+ dits[25] = 33.0173;
+ dits[26] = 36.80;
+ dits[27] = -2;
+ dits[28] = 34.6955;
+ dits[29] = 36.80;
+ gMC->Gsvolu("I216", "PCON", idtmed[272], dits, 30); // supports (1-6) of the ladders
+
+
+ // --- Place SPD (option 'a') volumes into their mother volume IT12
+
// SPD - option 'a'
- // detector thickness = 300 microns
- // chip thickness = 300 microns
// (this is NOT the default)
- if (option == 1 && thickness == 2) {
+ if (option == 1) {
gMC->Gspos("I12A",5,"IT12",0.0,0.0,0.0,idrotm[238],"MANY");
gMC->Gspos("I12A",6,"IT12",0.0,0.0,0.0,idrotm[236],"MANY");
gMC->Gspos("I12A",3,"IT12",0.0,0.0,0.0,idrotm[234],"MANY");
gMC->Gspos("I12A",4,"IT12",0.0,0.0,0.0,idrotm[243],"MANY");
gMC->Gspos("I12A",1,"IT12",0.0,0.0,0.0,0,"MANY");
- gMC->Gspos("I10A",2,"I12A",0.203-0.0009,3.8206-0.0175,0.0,idrotm[244],"ONLY");
- gMC->Gspos("I10A",1,"I12A",1.4531-0.0063,3.8152-0.0164,0.0,idrotm[245],"ONLY");
- gMC->Gspos("I20A",1,"I12A",3.0174+0.0074,6.5143+0.0159,0.0,idrotm[246],"ONLY");
- gMC->Gspos("I20A",2,"I12A",1.9612+0.0048,6.9062+0.0168,0.0,idrotm[247],"ONLY");
- gMC->Gspos("I20A",3,"I12A",0.8567+0.0021,7.1279+0.0174,0.0,idrotm[248],"ONLY");
- gMC->Gspos("I20A",4,"I12A",-0.2689-0.0006,7.1742+0.0175,0.0,idrotm[249],"ONLY");
+ deltax=((ddet1-0.01/2.)+(dchip1-0.015/2.))*TMath::Cos(270.*TMath::Pi()/180.); // see definition of idrotm[244]
+ deltay=((ddet1-0.01/2.)+(dchip1-0.015/2.))*TMath::Sin(270.*TMath::Pi()/180.); // see definition of idrotm[244]
+ gMC->Gspos("I10A",2,"I12A",0.203+deltax,3.8206+deltay,0.0,idrotm[244],"ONLY");
+ deltax=((ddet1-0.01/2.)+(dchip1-0.015/2.))*TMath::Cos(252.*TMath::Pi()/180.); // see definition of idrotm[245]
+ deltay=((ddet1-0.01/2.)+(dchip1-0.015/2.))*TMath::Sin(252.*TMath::Pi()/180.); // see definition of idrotm[245]
+ gMC->Gspos("I10A",1,"I12A",1.4531+deltax,3.8152+deltay,0.0,idrotm[245],"ONLY");
+ deltax=((ddet2-0.01/2.)+(dchip2-0.015/2.))*TMath::Cos(40.*TMath::Pi()/180.); // see definition of idrotm[246]
+ deltay=((ddet2-0.01/2.)+(dchip2-0.015/2.))*TMath::Sin(40.*TMath::Pi()/180.); // see definition of idrotm[246]
+ gMC->Gspos("I20A",1,"I12A",3.0174+deltax,6.5143+deltay,0.0,idrotm[246],"ONLY");
+ deltax=((ddet2-0.01/2.)+(dchip2-0.015/2.))*TMath::Cos(49.*TMath::Pi()/180.); // see definition of idrotm[247]
+ deltay=((ddet2-0.01/2.)+(dchip2-0.015/2.))*TMath::Sin(49.*TMath::Pi()/180.); // see definition of idrotm[247]
+ gMC->Gspos("I20A",2,"I12A",1.9612+deltax,6.9062+deltay,0.0,idrotm[247],"ONLY");
+ deltax=((ddet2-0.01/2.)+(dchip2-0.015/2.))*TMath::Cos(58.*TMath::Pi()/180.); // see definition of idrotm[248]
+ deltay=((ddet2-0.01/2.)+(dchip2-0.015/2.))*TMath::Sin(58.*TMath::Pi()/180.); // see definition of idrotm[248]
+ gMC->Gspos("I20A",3,"I12A",0.8567+deltax,7.1279+deltay,0.0,idrotm[248],"ONLY");
+ deltax=((ddet2-0.01/2.)+(dchip2-0.015/2.))*TMath::Cos(67.*TMath::Pi()/180.); // see definition of idrotm[249]
+ deltay=((ddet2-0.01/2.)+(dchip2-0.015/2.))*TMath::Sin(67.*TMath::Pi()/180.); // see definition of idrotm[249]
+ gMC->Gspos("I20A",4,"I12A",-0.2689+deltax,7.1742+deltay,0.0,idrotm[249],"ONLY");
gMC->Gspos("I123",2,"I12A",-0.2978,5.5196,0.0,idrotm[214],"ONLY");
gMC->Gspos("I121",2,"I12A",-0.2385,4.1518,0.0,idrotm[213],"ONLY");
gMC->Gspos("I122",2,"I12A",-0.2968,4.0207,0.0,idrotm[212],"ONLY");
gMC->Gspos("I126",2,"I12A",-0.7799,7.2874,0.0,idrotm[217],"ONLY");
gMC->Gspos("I125",2,"I12A",-0.6315,7.0883,0.0,idrotm[216],"ONLY");
gMC->Gspos("I124",2,"I12A",-0.4965,6.8742,0.0,idrotm[215],"ONLY");
- gMC->Gspos("I103",3,"I10A",-0.05,0.0075,-3.536,idrotm[237],"ONLY");
- gMC->Gspos("I103",4,"I10A",-0.05,0.0075,-10.708,idrotm[237],"ONLY");
- gMC->Gspos("I103",1,"I10A",-0.05,0.0075,10.708,0,"ONLY");
- gMC->Gspos("I103",2,"I10A",-0.05,0.0075,3.536,0,"ONLY");
+ gMC->Gspos("I103",3,"I10A",-0.05,-di10a[1]+2.*di104[1]+di103[1],-3.536,idrotm[237],"ONLY");
+ gMC->Gspos("I103",4,"I10A",-0.05,-di10a[1]+2.*di104[1]+di103[1],-10.708,idrotm[237],"ONLY");
+ gMC->Gspos("I103",1,"I10A",-0.05,-di10a[1]+2.*di104[1]+di103[1],10.708,0,"ONLY");
+ gMC->Gspos("I103",2,"I10A",-0.05,-di10a[1]+2.*di104[1]+di103[1],3.536,0,"ONLY");
gMC->Gspos("I105",1,"I10A",-0.05,0.01,-16.844,idrotm[237],"ONLY");
gMC->Gspos("I105",2,"I10A",-0.05,0.01,16.844,0,"ONLY");
- gMC->Gspos("I104",1,"I10A",0.0,-0.015-0.0175,0.0,0,"ONLY");
- gMC->Gspos("I1D3",3,"I20A",-0.05,0.0075,-3.536,idrotm[237],"ONLY");
- gMC->Gspos("I1D3",4,"I20A",-0.05,0.0075,-10.708,idrotm[237],"ONLY");
- gMC->Gspos("I1D3",1,"I20A",-0.05,0.0075,10.708,0,"ONLY");
- gMC->Gspos("I1D3",2,"I20A",-0.05,0.0075,3.536,0,"ONLY");
+ gMC->Gspos("I104",1,"I10A",0.0,-di10a[1]+di104[1],0.0,0,"ONLY");
+ gMC->Gspos("I1D3",3,"I20A",-0.05,-di20a[1]+2.*di104[1]+di1d3[1],-3.536,idrotm[237],"ONLY");
+ gMC->Gspos("I1D3",4,"I20A",-0.05,-di20a[1]+2.*di104[1]+di1d3[1],-10.708,idrotm[237],"ONLY");
+ gMC->Gspos("I1D3",1,"I20A",-0.05,-di20a[1]+2.*di104[1]+di1d3[1],10.708,0,"ONLY");
+ gMC->Gspos("I1D3",2,"I20A",-0.05,-di20a[1]+2.*di104[1]+di1d3[1],3.536,0,"ONLY");
gMC->Gspos("I105",3,"I20A",-0.05,0.01,-16.844,idrotm[237],"ONLY");
gMC->Gspos("I105",4,"I20A",-0.05,0.01,16.844,0,"ONLY");
- gMC->Gspos("I104",2,"I20A",0.0,-0.015-0.0175,0.0,0,"ONLY");
+ gMC->Gspos("I104",2,"I20A",0.0,-di20a[1]+di104[1],0.0,0,"ONLY");
gMC->Gspos("I112",2,"I113",0.25,0.02,0.0,idrotm[206],"ONLY");
gMC->Gspos("I111",2,"I113",0.1318,-0.0008,0.0,idrotm[205],"ONLY");
gMC->Gspos("I118",1,"I113",0.0,-0.0454,0.0,0,"ONLY");
gMC->Gspos("I116",1,"I113",0.0,0.0042,0.0,0,"ONLY");
gMC->Gspos("I111",1,"I113",-0.1318,-0.0008,0.0,idrotm[204],"ONLY");
gMC->Gspos("I112",1,"I113",-0.25,0.02,0.0,idrotm[203],"ONLY");
- gMC->Gspos("I101",1,"I103",-0.088,0.0075+0.0075,0.0,0,"ONLY");
- gMC->Gspos("I102",1,"I103",0.0,-0.005-0.01,-2.8,0,"ONLY");
- gMC->Gspos("I102",2,"I103",0.0,-0.005-0.01,-1.4,0,"ONLY");
- gMC->Gspos("I102",3,"I103",0.0,-0.005-0.01,0.0,0,"ONLY");
- gMC->Gspos("I102",4,"I103",0.0,-0.005-0.01,1.4,0,"ONLY");
- gMC->Gspos("I102",5,"I103",0.0,-0.005-0.01,2.8,0,"ONLY");
- gMC->Gspos("I1D1",1,"I1D3",-0.088,0.0075+0.0075,0.0,0,"ONLY");
- gMC->Gspos("I102",6,"I1D3",0.0,-0.005-0.01,-2.8,0,"ONLY");
- gMC->Gspos("I102",7,"I1D3",0.0,-0.005-0.01,-1.4,0,"ONLY");
- gMC->Gspos("I102",8,"I1D3",0.0,-0.005-0.01,0.0,0,"ONLY");
- gMC->Gspos("I102",9,"I1D3",0.0,-0.005-0.01,1.4,0,"ONLY");
- gMC->Gspos("I102",10,"I1D3",0.0,-0.005-0.01,2.8,0,"ONLY");
+ gMC->Gspos("I101",1,"I103",-0.088,ddet1,0.0,0,"ONLY");
+ gMC->Gspos("I102",1,"I103",0.0,-dchip1,-2.8,0,"ONLY");
+ gMC->Gspos("I102",2,"I103",0.0,-dchip1,-1.4,0,"ONLY");
+ gMC->Gspos("I102",3,"I103",0.0,-dchip1,0.0,0,"ONLY");
+ gMC->Gspos("I102",4,"I103",0.0,-dchip1,1.4,0,"ONLY");
+ gMC->Gspos("I102",5,"I103",0.0,-dchip1,2.8,0,"ONLY");
+ gMC->Gspos("I1D1",1,"I1D3",-0.088,ddet2,0.0,0,"ONLY");
+ gMC->Gspos("I1D2",1,"I1D3",0.0,-dchip2,-2.8,0,"ONLY");
+ gMC->Gspos("I1D2",2,"I1D3",0.0,-dchip2,-1.4,0,"ONLY");
+ gMC->Gspos("I1D2",3,"I1D3",0.0,-dchip2,0.0,0,"ONLY");
+ gMC->Gspos("I1D2",4,"I1D3",0.0,-dchip2,1.4,0,"ONLY");
+ gMC->Gspos("I1D2",5,"I1D3",0.0,-dchip2,2.8,0,"ONLY");
gMC->Gspos("I117",1,"I116",0.0,0.0,0.0,0,"ONLY");
gMC->Gspos("ITS1",1,"I101",0.0,0.0,0.0,0,"ONLY");
gMC->Gspos("ITS2",1,"I1D1",0.0,0.0,0.0,0,"ONLY");
// --- Place SPD (option 'b') volumes into their mother volume IT12
// SPD - option 'b'
- // detector thickness = 300 microns
- // chip thickness = 300 microns
// (this is the default)
- if (option == 2 && thickness == 2) {
+ if (option == 2) {
gMC->Gspos("I12B",1,"IT12",0.0,0.0,0.0,0,"MANY");
gMC->Gspos("I12B",8,"IT12",0.0,0.0,0.0,idrotm[233],"MANY");
gMC->Gspos("I12B",5,"IT12",0.0,0.0,0.0,idrotm[247],"MANY");
gMC->Gspos("I12B",9,"IT12",0.0,0.0,0.0,idrotm[248],"MANY");
gMC->Gspos("I12B",10,"IT12",0.0,0.0,0.0,idrotm[249],"MANY");
- gMC->Gspos("I10B",2,"I12B",0.203-0.0009,3.8206-0.0175,0.0,idrotm[238],"ONLY");
- gMC->Gspos("I10B",1,"I12B",1.4531-0.0063,3.8152-0.0164,0.0,idrotm[239],"ONLY");
- gMC->Gspos("I20B",1,"I12B",3.0174+0.0074,6.5143+0.0159,0.0,idrotm[240],"ONLY");
- gMC->Gspos("I20B",2,"I12B",1.9612+0.0048,6.9062+0.0168,0.0,idrotm[241],"ONLY");
- gMC->Gspos("I20B",3,"I12B",0.8567+0.0021,7.1279+0.0174,0.0,idrotm[242],"ONLY");
- gMC->Gspos("I20B",4,"I12B",-0.2689-0.0006,7.1742+0.0175,0.0,idrotm[243],"ONLY");
+ deltax=((ddet1-0.01/2.)+(dchip1-0.015/2.))*TMath::Cos(270.*TMath::Pi()/180.); // see definition of idrotm[238]
+ deltay=((ddet1-0.01/2.)+(dchip1-0.015/2.))*TMath::Sin(270.*TMath::Pi()/180.); // see definition of idrotm[238]
+ gMC->Gspos("I10B",2,"I12B",0.203+deltax,3.8206+deltay,0.0,idrotm[238],"ONLY");
+ deltax=((ddet1-0.01/2.)+(dchip1-0.015/2.))*TMath::Cos(252.*TMath::Pi()/180.); // see definition of idrotm[239]
+ deltay=((ddet1-0.01/2.)+(dchip1-0.015/2.))*TMath::Sin(252.*TMath::Pi()/180.); // see definition of idrotm[239]
+ gMC->Gspos("I10B",1,"I12B",1.4531+deltax,3.8152+deltay,0.0,idrotm[239],"ONLY");
+ deltax=((ddet2-0.01/2.)+(dchip2-0.015/2.))*TMath::Cos(40.*TMath::Pi()/180.); // see definition of idrotm[240]
+ deltay=((ddet2-0.01/2.)+(dchip2-0.015/2.))*TMath::Sin(40.*TMath::Pi()/180.); // see definition of idrotm[240]
+ gMC->Gspos("I20B",1,"I12B",3.0174+deltax,6.5143+deltay,0.0,idrotm[240],"ONLY");
+ deltax=((ddet2-0.01/2.)+(dchip2-0.015/2.))*TMath::Cos(49.*TMath::Pi()/180.); // see definition of idrotm[241]
+ deltay=((ddet2-0.01/2.)+(dchip2-0.015/2.))*TMath::Sin(49.*TMath::Pi()/180.); // see definition of idrotm[241]
+ gMC->Gspos("I20B",2,"I12B",1.9612+deltax,6.9062+deltay,0.0,idrotm[241],"ONLY");
+ deltax=((ddet2-0.01/2.)+(dchip2-0.015/2.))*TMath::Cos(58.*TMath::Pi()/180.); // see definition of idrotm[242]
+ deltay=((ddet2-0.01/2.)+(dchip2-0.015/2.))*TMath::Sin(58.*TMath::Pi()/180.); // see definition of idrotm[242]
+ gMC->Gspos("I20B",3,"I12B",0.8567+deltax,7.1279+deltay,0.0,idrotm[242],"ONLY");
+ deltax=((ddet2-0.01/2.)+(dchip2-0.015/2.))*TMath::Cos(67.*TMath::Pi()/180.); // see definition of idrotm[243]
+ deltay=((ddet2-0.01/2.)+(dchip2-0.015/2.))*TMath::Sin(67.*TMath::Pi()/180.); // see definition of idrotm[243]
+ gMC->Gspos("I20B",4,"I12B",-0.2689+deltax,7.1742+deltay,0.0,idrotm[243],"ONLY");
gMC->Gspos("I123",1,"I12B",-0.2978,5.5196,0.0,idrotm[214],"ONLY");
gMC->Gspos("I121",1,"I12B",-0.2385,4.1518,0.0,idrotm[213],"ONLY");
gMC->Gspos("I122",1,"I12B",-0.2968,4.0207,0.0,idrotm[212],"ONLY");
gMC->Gspos("I124",1,"I12B",-0.4965,6.8742,0.0,idrotm[215],"ONLY");
gMC->Gspos("I105",3,"I10B",-0.05,-0.01,-16.844,idrotm[201],"ONLY");
gMC->Gspos("I105",4,"I10B",-0.05,-0.01,16.844,0,"ONLY");
- gMC->Gspos("I107",2,"I10B",-0.0455,-0.0125,3.536,0,"ONLY");
- gMC->Gspos("I107",1,"I10B",-0.0455,-0.0125,10.708,0,"ONLY");
- gMC->Gspos("I107",4,"I10B",-0.0455,-0.0125,-10.708,idrotm[201],"ONLY");
- gMC->Gspos("I107",3,"I10B",-0.0455,-0.0125,-3.536,idrotm[201],"ONLY");
+ gMC->Gspos("I107",2,"I10B",-0.0455,-di10b[1]+di107[1],3.536,0,"ONLY");
+ gMC->Gspos("I107",1,"I10B",-0.0455,-di10b[1]+di107[1],10.708,0,"ONLY");
+ gMC->Gspos("I107",4,"I10B",-0.0455,-di10b[1]+di107[1],-10.708,idrotm[201],"ONLY");
+ gMC->Gspos("I107",3,"I10B",-0.0455,-di10b[1]+di107[1],-3.536,idrotm[201],"ONLY");
gMC->Gspos("I109",1,"I10B",-0.138,0.015,-16.844,idrotm[201],"ONLY");
gMC->Gspos("I109",2,"I10B",-0.138,0.015,16.844,0,"ONLY");
- gMC->Gspos("I108",1,"I10B",-0.138,0.01+0.0175,0.0,0,"ONLY");
+ gMC->Gspos("I108",1,"I10B",-0.138,-di10b[1]+2.*di107[1]+di108[1],0.0,0,"ONLY");
gMC->Gspos("I105",1,"I20B",-0.05,-0.01,-16.844,idrotm[201],"ONLY");
gMC->Gspos("I105",2,"I20B",-0.05,-0.01,16.844,0,"ONLY");
- gMC->Gspos("I1D7",2,"I20B",-0.0455,-0.0125,3.536,0,"ONLY");
- gMC->Gspos("I1D7",1,"I20B",-0.0455,-0.0125,10.708,0,"ONLY");
- gMC->Gspos("I1D7",4,"I20B",-0.0455,-0.0125,-10.708,idrotm[201],"ONLY");
- gMC->Gspos("I1D7",3,"I20B",-0.0455,-0.0125,-3.536,idrotm[201],"ONLY");
+ gMC->Gspos("I1D7",2,"I20B",-0.0455,-di20b[1]+di1d7[1],3.536,0,"ONLY");
+ gMC->Gspos("I1D7",1,"I20B",-0.0455,-di20b[1]+di1d7[1],10.708,0,"ONLY");
+ gMC->Gspos("I1D7",4,"I20B",-0.0455,-di20b[1]+di1d7[1],-10.708,idrotm[201],"ONLY");
+ gMC->Gspos("I1D7",3,"I20B",-0.0455,-di20b[1]+di1d7[1],-3.536,idrotm[201],"ONLY");
gMC->Gspos("I109",3,"I20B",-0.138,0.015,-16.844,idrotm[201],"ONLY");
gMC->Gspos("I109",4,"I20B",-0.138,0.015,16.844,0,"ONLY");
- gMC->Gspos("I108",2,"I20B",-0.138,0.01+0.0175,0.0,0,"ONLY");
+ gMC->Gspos("I108",2,"I20B",-0.138,-di20b[1]+2.*di1d7[1]+di108[1],0.0,0,"ONLY");
gMC->Gspos("I112",2,"I113",0.25,0.02,0.0,idrotm[206],"ONLY");
gMC->Gspos("I111",2,"I113",0.1318,-0.0008,0.0,idrotm[205],"ONLY");
gMC->Gspos("I118",1,"I113",0.0,-0.0454,0.0,0,"ONLY");
gMC->Gspos("I116",1,"I113",0.0,0.0042,0.0,0,"ONLY");
gMC->Gspos("I111",1,"I113",-0.1318,-0.0008,0.0,idrotm[204],"ONLY");
gMC->Gspos("I112",1,"I113",-0.25,0.02,0.0,idrotm[203],"ONLY");
- gMC->Gspos("I106",1,"I107",0.0,-0.005-0.01,-1.4,0,"ONLY");
- gMC->Gspos("I106",2,"I107",0.0,-0.005-0.01,0.0,0,"ONLY");
- gMC->Gspos("I106",3,"I107",0.0,-0.005-0.01,1.4,0,"ONLY");
- gMC->Gspos("I106",4,"I107",0.0,-0.005-0.01,2.8,0,"ONLY");
- gMC->Gspos("I106",5,"I107",0.0,-0.005-0.01,-2.8,0,"ONLY");
- gMC->Gspos("I101",1,"I107",0.0,0.0075+0.0075,0.0,0,"ONLY");
- gMC->Gspos("I106",6,"I1D7",0.0,-0.005-0.01,-1.4,0,"ONLY");
- gMC->Gspos("I106",7,"I1D7",0.0,-0.005-0.01,0.0,0,"ONLY");
- gMC->Gspos("I106",8,"I1D7",0.0,-0.005-0.01,1.4,0,"ONLY");
- gMC->Gspos("I106",9,"I1D7",0.0,-0.005-0.01,2.8,0,"ONLY");
- gMC->Gspos("I106",10,"I1D7",0.0,-0.005-0.01,-2.8,0,"ONLY");
- gMC->Gspos("I1D1",1,"I1D7",0.0,0.0075+0.0075,0.0,0,"ONLY");
+ gMC->Gspos("I106",1,"I107",0.0,-dchip1,-1.4,0,"ONLY");
+ gMC->Gspos("I106",2,"I107",0.0,-dchip1,0.0,0,"ONLY");
+ gMC->Gspos("I106",3,"I107",0.0,-dchip1,1.4,0,"ONLY");
+ gMC->Gspos("I106",4,"I107",0.0,-dchip1,2.8,0,"ONLY");
+ gMC->Gspos("I106",5,"I107",0.0,-dchip1,-2.8,0,"ONLY");
+ gMC->Gspos("I101",1,"I107",0.0,ddet1,0.0,0,"ONLY");
+ gMC->Gspos("I1D6",1,"I1D7",0.0,-dchip2,-1.4,0,"ONLY");
+ gMC->Gspos("I1D6",2,"I1D7",0.0,-dchip2,0.0,0,"ONLY");
+ gMC->Gspos("I1D6",3,"I1D7",0.0,-dchip2,1.4,0,"ONLY");
+ gMC->Gspos("I1D6",4,"I1D7",0.0,-dchip2,2.8,0,"ONLY");
+ gMC->Gspos("I1D6",5,"I1D7",0.0,-dchip2,-2.8,0,"ONLY");
+ gMC->Gspos("I1D1",1,"I1D7",0.0,ddet2,0.0,0,"ONLY");
gMC->Gspos("I117",1,"I116",0.0,0.0,0.0,0,"ONLY");
gMC->Gspos("ITS1",1,"I101",0.0,0.0,0.0,0,"ONLY");
gMC->Gspos("ITS2",1,"I1D1",0.0,0.0,0.0,0,"ONLY");
// --- Place SDD volumes into their mother volume IT34
- gMC->Gspos("I048",8,"IT34",-22.1376,-14.227,0.0,idrotm[328],"ONLY");
- gMC->Gspos("I048",7,"IT34",-24.7213,-7.2588,0.0,idrotm[329],"ONLY");
- gMC->Gspos("I048",6,"IT34",-26.315,0.0,0.0,idrotm[350],"ONLY");
- gMC->Gspos("I048",5,"IT34",-24.7213,7.2588,0.0,idrotm[330],"ONLY");
- gMC->Gspos("I048",4,"IT34",-22.1376,14.227,0.0,idrotm[366],"ONLY");
- gMC->Gspos("I048",3,"IT34",-16.8725,19.4719,0.0,idrotm[331],"ONLY");
- gMC->Gspos("I048",2,"IT34",-10.9317,23.937,0.0,idrotm[332],"ONLY");
- gMC->Gspos("I048",1,"IT34",-3.6667,25.5027,0.0,idrotm[335],"ONLY");
- gMC->Gspos("I048",22,"IT34",3.745,26.0472,0.0,idrotm[334],"ONLY");
- gMC->Gspos("I048",21,"IT34",10.7032,23.4367,0.0,idrotm[314],"ONLY");
- gMC->Gspos("I048",20,"IT34",17.2327,19.8876,0.0,idrotm[315],"ONLY");
- gMC->Gspos("I048",19,"IT34",21.6749,13.9296,0.0,idrotm[316],"ONLY");
- gMC->Gspos("I048",18,"IT34",25.2491,7.4138,0.0,idrotm[317],"ONLY");
- gMC->Gspos("I048",17,"IT34",25.765,0.0,0.0,idrotm[318],"ONLY");
- gMC->Gspos("I048",16,"IT34",25.2491,-7.4138,0.0,idrotm[319],"ONLY");
- gMC->Gspos("I048",15,"IT34",21.6749,-13.9296,0.0,idrotm[320],"ONLY");
- gMC->Gspos("I048",14,"IT34",17.2327,-19.8876,0.0,idrotm[322],"ONLY");
- gMC->Gspos("I048",13,"IT34",10.7032,-23.4367,0.0,idrotm[323],"ONLY");
- gMC->Gspos("I048",12,"IT34",3.745,-26.0472,0.0,idrotm[324],"ONLY");
- gMC->Gspos("I048",11,"IT34",-3.6667,-25.5027,0.0,idrotm[325],"ONLY");
- gMC->Gspos("I048",10,"IT34",-10.9316,-23.937,0.0,idrotm[326],"ONLY");
- gMC->Gspos("I048",9,"IT34",-16.8725,-19.4719,0.0,idrotm[327],"ONLY");
- gMC->Gspos("I005",9,"IT34",-15.4744,-17.8584,-0.15,idrotm[327],"ONLY");
- gMC->Gspos("I005",8,"IT34",-20.3415,-13.0727,-0.15,idrotm[328],"ONLY");
- gMC->Gspos("I005",7,"IT34",-22.6728,-6.6573,-0.15,idrotm[329],"ONLY");
- gMC->Gspos("I005",6,"IT34",-24.18,0.0,-0.15,idrotm[350],"ONLY");
- gMC->Gspos("I005",5,"IT34",-22.6728,6.6573,-0.15,idrotm[330],"ONLY");
- gMC->Gspos("I005",4,"IT34",-20.3415,13.0727,-0.15,idrotm[366],"ONLY");
- gMC->Gspos("I005",3,"IT34",-15.4744,17.8584,-0.15,idrotm[331],"ONLY");
- gMC->Gspos("I005",2,"IT34",-10.0447,21.9949,-0.15,idrotm[332],"ONLY");
- gMC->Gspos("I005",1,"IT34",-3.3629,23.3895,-0.15,idrotm[335],"ONLY");
- gMC->Gspos("I005",22,"IT34",3.4412,23.9339,-0.15,idrotm[334],"ONLY");
- gMC->Gspos("I005",21,"IT34",9.8163,21.4946,-0.15,idrotm[314],"ONLY");
- gMC->Gspos("I005",20,"IT34",15.8345,18.274,-0.15,idrotm[315],"ONLY");
- gMC->Gspos("I005",19,"IT34",19.8788,12.7753,-0.15,idrotm[316],"ONLY");
- gMC->Gspos("I005",18,"IT34",23.2005,6.8123,-0.15,idrotm[317],"ONLY");
- gMC->Gspos("I005",17,"IT34",23.63,0.0,-0.15,idrotm[318],"ONLY");
- gMC->Gspos("I005",16,"IT34",23.2005,-6.8123,-0.15,idrotm[319],"ONLY");
- gMC->Gspos("I005",15,"IT34",19.8788,-12.7753,-0.15,idrotm[320],"ONLY");
- gMC->Gspos("I005",14,"IT34",15.8345,-18.274,-0.15,idrotm[322],"ONLY");
- gMC->Gspos("I005",13,"IT34",9.8163,-21.4946,-0.15,idrotm[323],"ONLY");
- gMC->Gspos("I005",12,"IT34",3.4412,-23.9339,-0.15,idrotm[324],"ONLY");
- gMC->Gspos("I005",11,"IT34",-3.3629,-23.3895,-0.15,idrotm[325],"ONLY");
- gMC->Gspos("I005",10,"IT34",-10.0447,-21.9949,-0.15,idrotm[326],"ONLY");
- gMC->Gspos("I047",6,"IT34",-10.8893,-13.6547,0.0,idrotm[311],"ONLY");
- gMC->Gspos("I047",5,"IT34",-15.1948,-7.3174,0.0,idrotm[313],"ONLY");
- gMC->Gspos("I047",4,"IT34",-17.465,0.0,0.0,idrotm[350],"ONLY");
- gMC->Gspos("I047",3,"IT34",-15.1948,7.3175,0.0,idrotm[336],"ONLY");
- gMC->Gspos("I047",2,"IT34",-10.8892,13.6547,0.0,idrotm[333],"ONLY");
- gMC->Gspos("I047",1,"IT34",-3.7528,16.4422,0.0,idrotm[321],"ONLY");
- gMC->Gspos("I047",14,"IT34",3.8863,17.0271,0.0,idrotm[305],"ONLY");
- gMC->Gspos("I047",13,"IT34",10.5152,13.1856,0.0,idrotm[306],"ONLY");
- gMC->Gspos("I047",12,"IT34",15.7354,7.5778,0.0,idrotm[307],"ONLY");
- gMC->Gspos("I047",11,"IT34",16.865,0.0,0.0,idrotm[356],"ONLY");
- gMC->Gspos("I047",10,"IT34",15.7354,-7.5778,0.0,idrotm[308],"ONLY");
- gMC->Gspos("I047",9,"IT34",10.5152,-13.1856,0.0,idrotm[309],"ONLY");
- gMC->Gspos("I047",8,"IT34",3.8863,-17.0271,0.0,idrotm[386],"ONLY");
- gMC->Gspos("I047",7,"IT34",-3.7528,-16.4422,0.0,idrotm[310],"ONLY");
- gMC->Gspos("I004",6,"IT34",-9.5581,-11.9855,0.0,idrotm[311],"ONLY");
- gMC->Gspos("I004",5,"IT34",-13.2713,-6.3911,0.0,idrotm[313],"ONLY");
- gMC->Gspos("I004",4,"IT34",-15.33,0.0,0.0,idrotm[350],"ONLY");
- gMC->Gspos("I004",3,"IT34",-13.2713,6.3911,0.0,idrotm[336],"ONLY");
- gMC->Gspos("I004",2,"IT34",-9.5581,11.9855,0.0,idrotm[333],"ONLY");
- gMC->Gspos("I004",1,"IT34",-3.2777,14.3607,0.0,idrotm[321],"ONLY");
- gMC->Gspos("I004",14,"IT34",3.4113,14.9456,0.0,idrotm[305],"ONLY");
- gMC->Gspos("I004",13,"IT34",9.184,11.5164,0.0,idrotm[306],"ONLY");
- gMC->Gspos("I004",12,"IT34",13.8119,6.6514,0.0,idrotm[307],"ONLY");
- gMC->Gspos("I004",11,"IT34",14.73,0.0,0.0,idrotm[356],"ONLY");
- gMC->Gspos("I004",10,"IT34",13.8119,-6.6514,0.0,idrotm[308],"ONLY");
- gMC->Gspos("I004",9,"IT34",9.184,-11.5164,0.0,idrotm[309],"ONLY");
- gMC->Gspos("I004",8,"IT34",3.4112,-14.9456,0.0,idrotm[386],"ONLY");
- gMC->Gspos("I004",7,"IT34",-3.2777,-14.3607,0.0,idrotm[310],"ONLY");
- gMC->Gspos("I024",3,"I048",-0.0001,0.0,31.925,0,"ONLY");
- gMC->Gspos("I024",4,"I048",-0.0001,0.0,-31.925,idrotm[355],"ONLY");
- gMC->Gspos("I018",14,"I048",-0.0001,0.0,-25.55,0,"ONLY");
- gMC->Gspos("I018",13,"I048",-0.0001,0.0,-18.25,0,"ONLY");
- gMC->Gspos("I018",12,"I048",-0.0001,0.0,-10.95,0,"ONLY");
- gMC->Gspos("I018",11,"I048",-0.0001,0.0,25.55,0,"ONLY");
- gMC->Gspos("I018",10,"I048",-0.0001,0.0,18.25,0,"ONLY");
- gMC->Gspos("I018",9,"I048",-0.0001,0.0,10.95,0,"ONLY");
- gMC->Gspos("I018",8,"I048",-0.0001,0.0,3.65,0,"ONLY");
- gMC->Gspos("I018",7,"I048",-0.0001,0.0,-3.65,0,"ONLY");
- gMC->Gspos("I402",5,"I005",0.0,-0.115,-3.55,0,"ONLY");
- gMC->Gspos("I402",4,"I005",0.0,0.115,3.85,0,"ONLY");
- gMC->Gspos("I402",2,"I005",0.0,0.115,18.75,0,"ONLY");
- gMC->Gspos("I402",3,"I005",0.0,-0.115,11.15,0,"ONLY");
- gMC->Gspos("I402",1,"I005",0.0,-0.115,25.9,0,"ONLY");
- gMC->Gspos("I402",6,"I005",0.0,0.115,-11.05,0,"ONLY");
- gMC->Gspos("I402",7,"I005",0.0,-0.115,-18.3,0,"ONLY");
- gMC->Gspos("I402",8,"I005",0.0,0.115,-25.9,0,"ONLY");
- gMC->Gspos("I024",1,"I047",0.0,0.0,24.625,0,"ONLY");
- gMC->Gspos("I018",4,"I047",0.0,0.0,-3.65,0,"ONLY");
- gMC->Gspos("I018",5,"I047",0.0,0.0,-10.95,0,"ONLY");
- gMC->Gspos("I018",6,"I047",0.0,0.0,-18.25,0,"ONLY");
- gMC->Gspos("I018",1,"I047",0.0,0.0,3.65,0,"ONLY");
- gMC->Gspos("I018",2,"I047",0.0,0.0,10.95,0,"ONLY");
- gMC->Gspos("I018",3,"I047",0.0,0.0,18.25,0,"ONLY");
- gMC->Gspos("I024",2,"I047",0.0,0.0,-24.625,idrotm[355],"ONLY");
- gMC->Gspos("I302",4,"I004",0.0,-0.115,-3.7,0,"ONLY");
- gMC->Gspos("I302",3,"I004",0.0,0.115,3.7,0,"ONLY");
- gMC->Gspos("I302",6,"I004",0.0,-0.115,-18.35,0,"ONLY");
- gMC->Gspos("I302",5,"I004",0.0,0.115,-11.2,0,"ONLY");
- gMC->Gspos("I302",2,"I004",0.0,-0.115,10.95,0,"ONLY");
- gMC->Gspos("I302",1,"I004",0.0,0.115,18.55,0,"ONLY");
- gMC->Gspos("I025",2,"I024",1.987,-1.5842,0.0,idrotm[343],"ONLY");
- gMC->Gspos("I026",2,"I024",1.8824,-1.7349,0.0,idrotm[344],"ONLY");
- gMC->Gspos("I025",1,"I024",-1.9,-1.7349,0.0,idrotm[344],"ONLY");
- gMC->Gspos("I026",1,"I024",-1.9782,-1.5689,0.0,idrotm[342],"ONLY");
- gMC->Gspos("I026",3,"I024",0.0958,1.6914,0.0,idrotm[343],"ONLY");
- gMC->Gspos("I025",3,"I024",-0.087,1.7067,0.0,idrotm[342],"ONLY");
- gMC->Gspos("I021",10,"I024",1.0761,0.0836,1.7742,idrotm[337],"ONLY");
- gMC->Gspos("I021",9,"I024",-1.0761,0.0836,1.7742,idrotm[339],"ONLY");
- gMC->Gspos("I021",12,"I024",1.0761,0.0836,-0.1242,idrotm[340],"ONLY");
- gMC->Gspos("I021",11,"I024",-1.0761,0.0836,-0.1242,idrotm[338],"ONLY");
- gMC->Gspos("I021",13,"I024",-1.0761,0.0836,-1.8758,idrotm[339],"ONLY");
- gMC->Gspos("I021",14,"I024",1.0761,0.0836,-1.8758,idrotm[337],"ONLY");
- gMC->Gspos("I023",3,"I024",0.0,-1.7899,-1.0,idrotm[341],"ONLY");
- gMC->Gspos("I022",3,"I024",0.0,-1.7899,0.825,idrotm[312],"ONLY");
- gMC->Gspos("I028",1,"I024",0.0,-1.7999,1.875,0,"MANY");
- gMC->Gspos("I029",1,"I024",0.0,-0.9999,2.65,0,"ONLY");
- gMC->Gspos("I030",1,"I024",0.0,0.6001,2.65,idrotm[344],"ONLY");
- gMC->Gspos("I027",1,"I024",0.0,0.0001,1.9965,idrotm[352],"ONLY");
- gMC->Gspos("I032",1,"I024",1.7,-0.4999,0.0,0,"ONLY");
- gMC->Gspos("I031",1,"I024",1.7,-0.4999,0.0,0,"ONLY");
- gMC->Gspos("I031",2,"I024",-1.7,-0.4999,0.0,0,"ONLY");
- gMC->Gspos("I032",2,"I024",-1.7,-0.4999,0.0,0,"ONLY");
- gMC->Gspos("I046",6,"I024",-0.616,1.1702,0.0,idrotm[353],"ONLY");
- gMC->Gspos("I046",5,"I024",-0.566,1.1702,0.0,idrotm[353],"ONLY");
- gMC->Gspos("I046",4,"I024",0.616,1.1702,0.0,idrotm[354],"ONLY");
- gMC->Gspos("I046",3,"I024",0.566,1.1702,0.0,idrotm[354],"ONLY");
- gMC->Gspos("I046",2,"I024",0.516,1.1702,0.0,idrotm[354],"ONLY");
- gMC->Gspos("I046",1,"I024",-0.516,1.1702,0.0,idrotm[353],"ONLY");
- gMC->Gspos("I022",2,"I018",0.0,-1.79,-0.1,idrotm[312],"ONLY");
- gMC->Gspos("I021",8,"I018",1.0761,0.0835,0.8492,idrotm[337],"ONLY");
- gMC->Gspos("I021",7,"I018",-1.0761,0.0835,2.6008,idrotm[338],"ONLY");
- gMC->Gspos("I021",6,"I018",-1.0761,0.0835,0.8492,idrotm[339],"ONLY");
- gMC->Gspos("I021",5,"I018",1.0761,0.0835,-1.0492,idrotm[340],"ONLY");
- gMC->Gspos("I021",4,"I018",1.0761,0.0835,-2.8008,idrotm[337],"ONLY");
- gMC->Gspos("I021",3,"I018",-1.0761,0.0835,-1.0492,idrotm[338],"ONLY");
- gMC->Gspos("I021",2,"I018",-1.0761,0.0835,-2.8008,idrotm[339],"ONLY");
- gMC->Gspos("I023",2,"I018",0.0,-1.79,-1.925,idrotm[341],"ONLY");
- gMC->Gspos("I019",3,"I018",-0.087,1.7066,0.0,idrotm[342],"ONLY");
- gMC->Gspos("I020",3,"I018",0.0958,1.6913,0.0,idrotm[343],"ONLY");
- gMC->Gspos("I019",2,"I018",1.987,-1.5843,0.0,idrotm[343],"ONLY");
- gMC->Gspos("I020",2,"I018",1.8824,-1.735,0.0,idrotm[344],"ONLY");
- gMC->Gspos("I022",1,"I018",0.0,-1.79,3.55,idrotm[312],"ONLY");
- gMC->Gspos("I021",1,"I018",1.0761,0.0835,2.6008,idrotm[340],"ONLY");
- gMC->Gspos("I023",1,"I018",0.0,-1.79,1.725,idrotm[341],"ONLY");
- gMC->Gspos("I019",1,"I018",-1.9,-1.735,0.0,idrotm[344],"ONLY");
- gMC->Gspos("I020",1,"I018",-1.9782,-1.569,0.0,idrotm[342],"ONLY");
- gMC->Gspos("I033",1,"I018",1.8,-1.75,1.35,0,"MANY");
- gMC->Gspos("I033",4,"I018",1.8,-1.75,-2.65,0,"MANY");
- gMC->Gspos("I033",2,"I018",-1.8,-1.75,-2.65,idrotm[345],"MANY");
- gMC->Gspos("I033",3,"I018",-1.8,-1.75,1.35,idrotm[345],"MANY");
- gMC->Gspos("I036",1,"I018",0.3087,1.7191,3.56,idrotm[346],"ONLY");
- gMC->Gspos("I036",4,"I018",-0.3087,1.7191,3.56,idrotm[347],"ONLY");
- gMC->Gspos("I036",2,"I018",0.3087,1.7191,-0.11,idrotm[346],"ONLY");
- gMC->Gspos("I036",3,"I018",-0.3087,1.7191,-0.11,idrotm[347],"ONLY");
- gMC->Gspos("I034",1,"I018",1.6,-1.775,1.35,idrotm[312],"ONLY");
- gMC->Gspos("I034",4,"I018",1.6,-1.775,-2.65,idrotm[312],"ONLY");
- gMC->Gspos("I034",2,"I018",-1.6,-1.775,-2.65,idrotm[348],"ONLY");
- gMC->Gspos("I034",3,"I018",-1.6,-1.775,1.35,idrotm[348],"ONLY");
- gMC->Gspos("I035",2,"I018",-1.7,-0.55,2.8581,idrotm[345],"MANY");
- gMC->Gspos("I035",1,"I018",1.7,-0.55,2.8581,0,"MANY");
- gMC->Gspos("I045",1,"I018",0.7483,0.9337,0.0,idrotm[346],"ONLY");
- gMC->Gspos("I045",2,"I018",0.7065,0.9337,0.0,idrotm[346],"ONLY");
- gMC->Gspos("I045",3,"I018",-0.7483,0.9337,0.0,idrotm[347],"ONLY");
- gMC->Gspos("I045",4,"I018",-0.7065,0.9337,0.0,idrotm[347],"ONLY");
- gMC->Gspos("I038",1,"I018",1.7,-0.55,0.0,idrotm[346],"ONLY");
- gMC->Gspos("I037",1,"I018",1.7,-0.55,0.0,idrotm[346],"ONLY");
- gMC->Gspos("I037",2,"I018",-1.7,-0.55,0.0,idrotm[347],"ONLY");
- gMC->Gspos("I038",2,"I018",-1.7,-0.55,0.0,idrotm[347],"ONLY");
- gMC->Gspos("I039",1,"I018",1.8126,-0.485,0.0,idrotm[346],"ONLY");
- gMC->Gspos("I040",1,"I018",1.9204,-0.7118,0.0,idrotm[346],"ONLY");
- gMC->Gspos("I041",1,"I018",1.7,-0.55,0.0,idrotm[346],"ONLY");
- gMC->Gspos("I042",1,"I018",2.0342,-0.8189,3.12,idrotm[346],"ONLY");
- gMC->Gspos("I042",2,"I018",2.0342,-0.8189,2.28,idrotm[346],"ONLY");
- gMC->Gspos("I042",3,"I018",2.0342,-0.8189,1.38,idrotm[346],"ONLY");
- gMC->Gspos("I042",4,"I018",2.0342,-0.8189,0.48,idrotm[346],"ONLY");
- gMC->Gspos("I042",5,"I018",2.0342,-0.8189,-0.42,idrotm[346],"ONLY");
- gMC->Gspos("I042",6,"I018",2.0342,-0.8189,-1.32,idrotm[346],"ONLY");
- gMC->Gspos("I042",7,"I018",2.0342,-0.8189,-2.22,idrotm[346],"ONLY");
- gMC->Gspos("I042",8,"I018",2.0342,-0.8189,-3.12,idrotm[346],"ONLY");
- gMC->Gspos("I043",8,"I018",1.5592,0.0038,-3.15,idrotm[346],"ONLY");
- gMC->Gspos("I043",7,"I018",1.5592,0.0038,-2.25,idrotm[346],"ONLY");
- gMC->Gspos("I043",6,"I018",1.5592,0.0038,-1.35,idrotm[346],"ONLY");
- gMC->Gspos("I043",5,"I018",1.5592,0.0038,-0.45,idrotm[346],"ONLY");
- gMC->Gspos("I043",4,"I018",1.5592,0.0038,0.45,idrotm[346],"ONLY");
- gMC->Gspos("I043",3,"I018",1.5592,0.0038,1.35,idrotm[346],"ONLY");
- gMC->Gspos("I043",2,"I018",1.5592,0.0038,2.25,idrotm[346],"ONLY");
- gMC->Gspos("I043",1,"I018",1.5592,0.0038,3.15,idrotm[346],"ONLY");
- gMC->Gspos("I039",2,"I018",-1.8126,-0.485,0.0,idrotm[347],"ONLY");
- gMC->Gspos("I041",2,"I018",-1.7,-0.55,0.0,idrotm[347],"ONLY");
- gMC->Gspos("I040",2,"I018",-1.9204,-0.7118,0.0,idrotm[347],"ONLY");
- gMC->Gspos("I043",16,"I018",-1.5592,0.0038,-3.15,idrotm[347],"ONLY");
- gMC->Gspos("I042",9,"I018",-2.0342,-0.8189,-3.12,idrotm[347],"ONLY");
- gMC->Gspos("I043",15,"I018",-1.5592,0.0038,-2.25,idrotm[347],"ONLY");
- gMC->Gspos("I042",10,"I018",-2.0342,-0.8189,-2.22,idrotm[347],"ONLY");
- gMC->Gspos("I042",11,"I018",-2.0342,-0.8189,-1.32,idrotm[347],"ONLY");
- gMC->Gspos("I043",14,"I018",-1.5592,0.0038,-1.35,idrotm[347],"ONLY");
- gMC->Gspos("I042",12,"I018",-2.0342,-0.8189,-0.42,idrotm[347],"ONLY");
- gMC->Gspos("I043",13,"I018",-1.5592,0.0038,-0.45,idrotm[347],"ONLY");
- gMC->Gspos("I043",12,"I018",-1.5592,0.0038,0.45,idrotm[347],"ONLY");
- gMC->Gspos("I043",11,"I018",-1.5592,0.0038,1.35,idrotm[347],"ONLY");
- gMC->Gspos("I043",10,"I018",-1.5592,0.0038,2.25,idrotm[347],"ONLY");
- gMC->Gspos("I043",9,"I018",-1.5592,0.0038,3.15,idrotm[347],"ONLY");
- gMC->Gspos("I042",16,"I018",-2.0342,-0.8189,3.12,idrotm[347],"ONLY");
- gMC->Gspos("I042",15,"I018",-2.0342,-0.8189,2.28,idrotm[347],"ONLY");
- gMC->Gspos("I042",14,"I018",-2.0342,-0.8189,1.38,idrotm[347],"ONLY");
- gMC->Gspos("I042",13,"I018",-2.0342,-0.8189,0.48,idrotm[347],"ONLY");
- gMC->Gspos("I044",2,"I018",-2.7487,-1.3673,-0.2,idrotm[349],"ONLY");
- gMC->Gspos("I044",1,"I018",2.7487,-1.3673,-0.2,idrotm[351],"ONLY");
- gMC->Gspos("I303",1,"I302",1.8125,0.0,4.2605,idrotm[301],"ONLY");
- gMC->Gspos("I303",2,"I302",-1.8125,0.0,4.2605,idrotm[302],"ONLY");
- gMC->Gspos("I303",3,"I302",-1.8125,0.0,-4.2605,idrotm[303],"ONLY");
- gMC->Gspos("I303",4,"I302",1.8125,0.0,-4.2605,idrotm[304],"ONLY");
- gMC->Gspos("I403",1,"I402",1.8125,0.0,4.2605,idrotm[301],"ONLY");
- gMC->Gspos("I403",2,"I402",-1.8125,0.0,4.2605,idrotm[302],"ONLY");
- gMC->Gspos("I403",3,"I402",-1.8125,0.0,-4.2605,idrotm[303],"ONLY");
- gMC->Gspos("I403",4,"I402",1.8125,0.0,-4.2605,idrotm[304],"ONLY");
- gMC->Gspos("ITS3",1,"I302",0.0,0.0,0.0,0,"ONLY");
- gMC->Gspos("ITS4",1,"I402",0.0,0.0,0.0,0,"ONLY");
+ // -- position SDD detectors of ladder 3 / layer 3
+
+ gMC->Gspos("ITS3", 1,"I302", 0.0, 0.0, 0.0, 0, "ONLY");
+ ySDD = Y_SDD_sep/2.+I302dits[1];
+ for (iSDD=0; iSDD<6; iSDD++) {
+ gMC->Gspos("I302", iSDD+1, "I004", 0.0, ySDD, Z_SDD_lay3[iSDD], 0, "ONLY");
+ ySDD = -ySDD;
+ }
+
+ gMC->Gspos("I004", 1,"IT34", -3.2777, 14.3607, 0.0, idrotm[321],"ONLY");
+ gMC->Gspos("I004", 2,"IT34", -9.5581, 11.9855, 0.0, idrotm[333],"ONLY");
+ gMC->Gspos("I004", 3,"IT34",-13.2713, 6.3911, 0.0, idrotm[336],"ONLY");
+ gMC->Gspos("I004", 4,"IT34",-15.33, 0.0, 0.0, idrotm[350],"ONLY");
+ gMC->Gspos("I004", 5,"IT34",-13.2713, -6.3911, 0.0, idrotm[313],"ONLY");
+ gMC->Gspos("I004", 6,"IT34", -9.5581, -11.9855, 0.0, idrotm[311],"ONLY");
+ gMC->Gspos("I004", 7,"IT34", -3.2777, -14.3607, 0.0, idrotm[310],"ONLY");
+ gMC->Gspos("I004", 8,"IT34", 3.4112, -14.9456, 0.0, idrotm[386],"ONLY");
+ gMC->Gspos("I004", 9,"IT34", 9.184, -11.5164, 0.0, idrotm[309],"ONLY");
+ gMC->Gspos("I004",10,"IT34", 13.8119, -6.6514, 0.0, idrotm[308],"ONLY");
+ gMC->Gspos("I004",11,"IT34", 14.73, 0.0, 0.0, idrotm[356],"ONLY");
+ gMC->Gspos("I004",12,"IT34", 13.8119, 6.6514, 0.0, idrotm[307],"ONLY");
+ gMC->Gspos("I004",13,"IT34", 9.184, 11.5164, 0.0, idrotm[306],"ONLY");
+ gMC->Gspos("I004",14,"IT34", 3.4113, 14.9456, 0.0, idrotm[305],"ONLY");
+
+
+ // -- position SDD detectors of ladder 4 / layer 4
+
+ gMC->Gspos("ITS4", 1,"I402", 0.0, 0.000, 0.0, 0,"ONLY");
+ ySDD = -(Y_SDD_sep/2.+I402dits[1]);
+ for (iSDD=0; iSDD<8; iSDD++) {
+ gMC->Gspos("I402", iSDD+1, "I005", 0.0, ySDD, Z_SDD_lay4[iSDD], 0, "ONLY");
+ ySDD = -ySDD;
+ }
+
+ gMC->Gspos("I005", 1,"IT34", -3.3629, 23.3895,-0.15, idrotm[335],"ONLY");
+ gMC->Gspos("I005", 2,"IT34",-10.0447, 21.9949,-0.15, idrotm[332],"ONLY");
+ gMC->Gspos("I005", 3,"IT34",-15.4744, 17.8584,-0.15, idrotm[331],"ONLY");
+ gMC->Gspos("I005", 4,"IT34",-20.3415, 13.0727,-0.15, idrotm[366],"ONLY");
+ gMC->Gspos("I005", 5,"IT34",-22.6728, 6.6573,-0.15, idrotm[330],"ONLY");
+ gMC->Gspos("I005", 6,"IT34",-24.18, 0.0, -0.15, idrotm[350],"ONLY");
+ gMC->Gspos("I005", 7,"IT34",-22.6728, -6.6573,-0.15, idrotm[329],"ONLY");
+ gMC->Gspos("I005", 8,"IT34",-20.3415, -13.0727,-0.15, idrotm[328],"ONLY");
+ gMC->Gspos("I005", 9,"IT34",-15.4744, -17.8584,-0.15, idrotm[327],"ONLY");
+ gMC->Gspos("I005",10,"IT34",-10.0447, -21.9949,-0.15, idrotm[326],"ONLY");
+ gMC->Gspos("I005",11,"IT34", -3.3629, -23.3895,-0.15, idrotm[325],"ONLY");
+ gMC->Gspos("I005",12,"IT34", 3.4412, -23.9339,-0.15, idrotm[324],"ONLY");
+ gMC->Gspos("I005",13,"IT34", 9.8163, -21.4946,-0.15, idrotm[323],"ONLY");
+ gMC->Gspos("I005",14,"IT34", 15.8345, -18.274, -0.15, idrotm[322],"ONLY");
+ gMC->Gspos("I005",15,"IT34", 19.8788, -12.7753,-0.15, idrotm[320],"ONLY");
+ gMC->Gspos("I005",16,"IT34", 23.2005, -6.8123,-0.15, idrotm[319],"ONLY");
+ gMC->Gspos("I005",17,"IT34", 23.63, 0.0, -0.15, idrotm[318],"ONLY");
+ gMC->Gspos("I005",18,"IT34", 23.2005, 6.8123,-0.15, idrotm[317],"ONLY");
+ gMC->Gspos("I005",19,"IT34", 19.8788, 12.7753,-0.15, idrotm[316],"ONLY");
+ gMC->Gspos("I005",20,"IT34", 15.8345, 18.274, -0.15, idrotm[315],"ONLY");
+ gMC->Gspos("I005",21,"IT34", 9.8163, 21.4946,-0.15, idrotm[314],"ONLY");
+ gMC->Gspos("I005",22,"IT34", 3.4412, 23.9339,-0.15, idrotm[334],"ONLY");
+
+
+ // -- build block of the SDD ladder frame holding the electronics
+
+ gMC->Gspos("I019", 1,"I018", -1.9, -1.735, 0.0, idrotm[344], "ONLY");
+ gMC->Gspos("I019", 2,"I018", 1.987, -1.5843, 0.0, idrotm[343], "ONLY");
+ gMC->Gspos("I019", 3,"I018", -0.087, 1.7066, 0.0, idrotm[342], "ONLY");
+
+ gMC->Gspos("I020", 1,"I018", -1.9782, -1.569, 0.0, idrotm[342], "ONLY");
+ gMC->Gspos("I020", 2,"I018", 1.8824, -1.735, 0.0, idrotm[344], "ONLY");
+ gMC->Gspos("I020", 3,"I018", 0.0958, 1.6913, 0.0, idrotm[343], "ONLY");
+
+ gMC->Gspos("I021", 1,"I018", 1.0761, 0.0835, 2.6008, idrotm[340], "ONLY");
+ gMC->Gspos("I021", 2,"I018", -1.0761, 0.0835,-2.8008, idrotm[339], "ONLY");
+ gMC->Gspos("I021", 3,"I018", -1.0761, 0.0835,-1.0492, idrotm[338], "ONLY");
+ gMC->Gspos("I021", 4,"I018", 1.0761, 0.0835,-2.8008, idrotm[337], "ONLY");
+ gMC->Gspos("I021", 5,"I018", 1.0761, 0.0835,-1.0492, idrotm[340], "ONLY");
+ gMC->Gspos("I021", 6,"I018", -1.0761, 0.0835, 0.8492, idrotm[339], "ONLY");
+ gMC->Gspos("I021", 7,"I018", -1.0761, 0.0835, 2.6008, idrotm[338], "ONLY");
+ gMC->Gspos("I021", 8,"I018", 1.0761, 0.0835, 0.8492, idrotm[337], "ONLY");
+
+ gMC->Gspos("I022", 1,"I018", 0.0, -1.79, 3.55, idrotm[312], "ONLY");
+ gMC->Gspos("I022", 2,"I018", 0.0, -1.79, -0.1, idrotm[312], "ONLY");
+
+ gMC->Gspos("I023", 1,"I018", 0.0, -1.79, 1.725, idrotm[341], "ONLY");
+ gMC->Gspos("I023", 2,"I018", 0.0, -1.79, -1.925, idrotm[341], "ONLY");
+
+ gMC->Gspos("I033", 1,"I018", 1.8, -1.75, 1.35, 0, "MANY");
+ gMC->Gspos("I033", 2,"I018", -1.8, -1.75, -2.65, idrotm[345], "MANY");
+ gMC->Gspos("I033", 3,"I018", -1.8, -1.75, 1.35, idrotm[345], "MANY");
+ gMC->Gspos("I033", 4,"I018", 1.8, -1.75, -2.65, 0, "MANY");
+
+ gMC->Gspos("I034", 1,"I018", 1.6, -1.775, 1.35, idrotm[312], "ONLY");
+ gMC->Gspos("I034", 2,"I018", -1.6, -1.775, -2.65, idrotm[348], "ONLY");
+ gMC->Gspos("I034", 3,"I018", -1.6, -1.775, 1.35, idrotm[348], "ONLY");
+ gMC->Gspos("I034", 4,"I018", 1.6, -1.775, -2.65, idrotm[312], "ONLY");
+
+ gMC->Gspos("I035", 1,"I018", 1.7, -0.55, I018dits[2]-I035dits[2], 0, "MANY");
+ gMC->Gspos("I035", 2,"I018", -1.7, -0.55, I018dits[2]-I035dits[2], 0, "MANY");
+
+ gMC->Gspos("I036", 1,"I018", 0.3087, 1.7191, 3.56, idrotm[346], "ONLY");
+ gMC->Gspos("I036", 2,"I018", 0.3087, 1.7191,-0.11, idrotm[346], "ONLY");
+ gMC->Gspos("I036", 3,"I018", -0.3087, 1.7191,-0.11, idrotm[347], "ONLY");
+ gMC->Gspos("I036", 4,"I018", -0.3087, 1.7191, 3.56, idrotm[347], "ONLY");
+
+ gMC->Gspos("I037", 1,"I018", SDD_CoolPipe[0], SDD_CoolPipe[1], SDD_CoolPipe[2], 0 , "ONLY");
+ gMC->Gspos("I037", 2,"I018", -SDD_CoolPipe[0], SDD_CoolPipe[1], SDD_CoolPipe[2], 0 , "ONLY");
+
+ gMC->Gspos("I038", 1,"I018", SDD_CoolPipe[0], SDD_CoolPipe[1], SDD_CoolPipe[2], 0 , "ONLY");
+ gMC->Gspos("I038", 2,"I018", -SDD_CoolPipe[0], SDD_CoolPipe[1], SDD_CoolPipe[2], 0 , "ONLY");
+
+ gMC->Gspos("I040", 1,"I018", 1.9204, -0.7118, 0.0, idrotm[346],"ONLY");
+ gMC->Gspos("I040", 2,"I018", -1.9204, -0.7118, 0.0, idrotm[347],"ONLY");
+ gMC->Gspos("I041", 1,"I018", SDD_CoolPipe[0], SDD_CoolPipe[1], SDD_CoolPipe[2], idrotm[346], "ONLY");
+ gMC->Gspos("I041", 2,"I018", -SDD_CoolPipe[0], SDD_CoolPipe[1], SDD_CoolPipe[2], idrotm[347], "ONLY");
+
+
+ // -- build block of the SDD electronics (heat bridge, chips, hybrid, anode microcable)
+
+ xI050 = SDD_CoolPipe[0]+SDD_CoolPipe[1]*sin30+I050dits[1]/cos30+I041dits[1];
+ yI050 = 0;
+ xI039 = -SDD_CoolPipe[1]/cos30;
+ yI039 = -I050dits[1]+I039dits[1];
+ gMC->Gspos("I039", 1,"I050", xI039, yI039, 0.0, 0, "ONLY");
+ xI042 = xI039+I039dits[0]-xI042space-I042dits[0];
+ yI042 = yI039+I039dits[1]+I042dits[1];
+ xI043 = xI039-I039dits[0]+xI043space+I043dits[0];
+ yI043 = yI039+I039dits[1]+I043dits[1];
+ zChipSpace = I042dits[2];
+ if (zChipSpace < I043dits[2]) {
+ zChipSpace = I043dits[2];
+ }
+ zChipSpace = zChipSpace * 2;
+ yI051space = (2*I039dits[2] - 4*zChipSpace)/5;
+ zchip = -I039dits[2] + yI051space + zChipSpace/2.;
+ for (ichip=0; ichip<4; ichip++) {
+ gMC->Gspos("I042", ichip+1, "I050", xI042, yI042, zchip, 0, "ONLY");
+ gMC->Gspos("I043", ichip+1, "I050", xI043, yI043, zchip, 0, "ONLY");
+ zchip += zChipSpace + yI051space;
+ }
+ xcap = 2*I039dits[0]/5.;
+ yI051 = yI039+I039dits[1]+I051dits[1];
+ zI051 = -I039dits[2] + yI051space/3.;
+ icap = 1;
+ for (ichip=0; ichip<5; ichip++) {
+ xI051 = xI039-I039dits[0]+xcap;
+ gMC->Gspos("I051", icap++,"I050", xI051, yI051, zI051, 0, "ONLY");
+ zI051 += yI051space/3.;
+ gMC->Gspos("I051", icap++,"I050", xI051, yI051, zI051, 0, "ONLY");
+ xI051 += xcap;
+ gMC->Gspos("I051", icap++,"I050", xI051, yI051, zI051, 0, "ONLY");
+ xI051 += xcap;
+ gMC->Gspos("I051", icap++,"I050", xI051, yI051, zI051, 0, "ONLY");
+ xI051 += xcap;
+ gMC->Gspos("I051", icap++,"I050", xI051, yI051, zI051, 0, "ONLY");
+ zI051 -= yI051space/3.;
+ if (ichip == 0) {
+ gMC->Gspos("I051", icap++,"I050", xI051, yI051, zI051, 0, "ONLY");
+ }
+ zI051 += zChipSpace + yI051space;
+ }
+ xI052 = -I050dits[0]+I052dits[0];
+ yI052 = yI051+I051dits[1]+I052dits[1];
+ gMC->Gspos("I052", 1,"I050", xI052, yI052, 0.0, 0, "ONLY");
+ xI044 = I050dits[0]-I044dits[3];
+ yI044 = yI052+I052dits[1]+I044dits[2];
+ gMC->Gspos("I044", 1,"I050", xI044, yI044, 0.0, idrotm[301], "ONLY");
+ gMC->Gspos("I050", 1,"I018", xI050, yI050, 0.0, idrotm[346],"ONLY");
+ gMC->Gspos("I050", 2,"I018", -xI050, yI050, 0.0, idrotm[347],"ONLY");
+
+
+ // -- build block of the SDD ladder frame at the end ladders
+
+ gMC->Gspos("I021",12,"I024", 1.0761, 0.0836,-0.1242, idrotm[340], "ONLY");
+ gMC->Gspos("I021",11,"I024", -1.0761, 0.0836,-0.1242, idrotm[338], "ONLY");
+ gMC->Gspos("I021",13,"I024", -1.0761, 0.0836,-1.8758, idrotm[339], "ONLY");
+ gMC->Gspos("I021",14,"I024", 1.0761, 0.0836,-1.8758, idrotm[337], "ONLY");
+
+ gMC->Gspos("I022", 3,"I024", 0.0, -1.7899, 0.825, idrotm[312], "ONLY");
+
+ gMC->Gspos("I023", 3,"I024", 0.0, -1.7899,-1.0, idrotm[341], "ONLY");
+
+ gMC->Gspos("I025", 1,"I024", -1.9, -1.7349, 0.0, idrotm[344], "ONLY");
+ gMC->Gspos("I025", 2,"I024", 1.987, -1.5842, 0.0, idrotm[343], "ONLY");
+
+ gMC->Gspos("I026", 1,"I024", -1.9782, -1.5689, 0.0, idrotm[342], "ONLY");
+ gMC->Gspos("I026", 2,"I024", 1.8824, -1.7349, 0.0, idrotm[344], "ONLY");
+
+ gMC->Gspos("I029", 1,"I024", -0.087, 1.7067, I029dits[2]-I024dits[2], idrotm[342], "ONLY");
+
+ gMC->Gspos("I030", 1,"I024", 0.0958, 1.6914, I030dits[2]-I024dits[2], idrotm[343], "ONLY");
+
+ gMC->Gspos("I031", 1,"I024", SDD_CoolPipe[0], SDD_CoolPipe[1], SDD_CoolPipe[2], 0 ,"ONLY");
+ gMC->Gspos("I031", 2,"I024", -SDD_CoolPipe[0], SDD_CoolPipe[1], SDD_CoolPipe[2], 0 ,"ONLY");
+
+ gMC->Gspos("I032", 1,"I024", SDD_CoolPipe[0], SDD_CoolPipe[1], SDD_CoolPipe[2], 0 ,"ONLY");
+ gMC->Gspos("I032", 2,"I024", -SDD_CoolPipe[0], SDD_CoolPipe[1], SDD_CoolPipe[2], 0 ,"ONLY");
+
+
+ xI424 = I028dits[0]/3.;
+ yI424 = -I028dits[1]+I424dits[1];
+ gMC->Gspos("I422", 1,"I421", 0.0, 0.0, 0.0, 0, "ONLY");
+ gMC->Gspos("I423", 1,"I421", 0.0, 0.0, I421dits[2]-I423dits[2], 0, "ONLY");
+ gMC->Gspos("I421", 1,"I420", 0.0, 0.0, 0.0, idrotm[312], "ONLY");
+ gMC->Gspos("I420", 1,"I028", -I028dits[0]/3., I028dits[1]-I420dits[1], 0.0, 0, "ONLY");
+ gMC->Gspos("I424", 1,"I028", xI424, yI424, 0.0, 0, "ONLY");
+ gMC->Gspos("I028", 1,"I024", 0.0, I028dits[1]-I024dits[1], I024dits[2]-I028dits[2], 0, "MANY");
+
+
+ // -- build the SDD ladder 3
+
+ indI425 = 1;
+ gMC->Gspos("I024", 1,"I047", 0.0, 0.0, 24.625, 0, "ONLY");
+ gMC->Gspos("I018", 1,"I047", 0.0, 0.0, 3.65, 0, "ONLY");
+ gMC->Gspos("I018", 2,"I047", 0.0, 0.0, 10.95, 0, "ONLY");
+ gMC->Gspos("I018", 3,"I047", 0.0, 0.0, 18.25, 0, "ONLY");
+ gMC->Gspos("I018", 4,"I047", 0.0, 0.0, -3.65, 0, "ONLY");
+ gMC->Gspos("I018", 5,"I047", 0.0, 0.0, -10.95, 0, "ONLY");
+ gMC->Gspos("I018", 6,"I047", 0.0, 0.0, -18.25, 0, "ONLY");
+ gMC->Gspos("I024", 2,"I047", 0.0, 0.0, -24.625, idrotm[355], "ONLY");
+ HVname[0] = 'I';
+ HVname[1] = '3';
+ HVname[2] = '1';
+ HVname[4] = '\0';
+ for (iSDD=0; iSDD<3; iSDD++) {
+ HVname[3] = (Char_t)(48+iSDD+5);
+ dits[0] = 1.350000;
+ dits[1] = I425dits[1];
+ dits[2] = (I047dits[2] - 2*I024dits[2] - Z_SDD_lay3[iSDD])/2.;
+ gMC->Gsvolu(HVname, "BOX ", idtmed[279], dits, 3);
+ xHV = 0.0;
+ yHV = -I047dits[1] + (2*iSDD+1)*dits[1];
+ zHV = I047dits[2] - 2*I024dits[2] - dits[2];
+ gMC->Gspos(HVname, 1,"I047", xHV, yHV, zHV, 0, "ONLY");
+ gMC->Gspos(HVname, 2,"I047", xHV, yHV, -zHV, 0, "ONLY");
+ gMC->Gspos("I425", indI425++,"I047", xI424, yHV, 24.625, 0, "ONLY");
+ gMC->Gspos("I425", indI425++,"I047", -xI424, yHV, -24.625, 0, "ONLY");
+ }
+ LVname[0] = 'I';
+ LVname[1] = '3';
+ LVname[2] = '1';
+ LVname[4] = '\0';
+ for (iSDD=0; iSDD<3; iSDD++) {
+ LVname[3] = (Char_t)(48+iSDD+1);
+ dits[0] = 1.350000;
+ dits[1] = 0.004423;
+ dits[2] = (I047dits[2] - (2*iSDD+1)*I018dits[2] - I039dits[2])/2.;
+ gMC->Gsvolu(LVname, "BOX ", idtmed[280], dits, 3);
+ yLV = I018dits[1] - dits[0]*cos30 - dits[1]*sin30;
+ xLV = xI050 -
+ fabs(yI050-yLV)*sin30/cos30 +
+ (I050dits[1]+(2*iSDD+1)*dits[1])/cos30;
+ zLV = I047dits[2] - dits[2];
+ gMC->Gspos(LVname, 1,"I047", xLV, yLV, zLV, idrotm[346], "ONLY");
+ gMC->Gspos(LVname, 2,"I047", xLV, yLV, -zLV, idrotm[346], "ONLY");
+ gMC->Gspos(LVname, 3,"I047", -xLV, yLV, zLV, idrotm[347], "ONLY");
+ gMC->Gspos(LVname, 4,"I047", -xLV, yLV, -zLV, idrotm[347], "ONLY");
+ }
+
+
+ // -- build the SDD ladder 4
+
+
+ gMC->Gspos("I024", 3,"I048", -0.0001, 0.0, 31.925, 0, "ONLY");
+ gMC->Gspos("I018", 7,"I048", -0.0001, 0.0, -3.65, 0, "ONLY");
+ gMC->Gspos("I018", 8,"I048", -0.0001, 0.0, 3.65, 0, "ONLY");
+ gMC->Gspos("I018", 9,"I048", -0.0001, 0.0, 10.95, 0, "ONLY");
+ gMC->Gspos("I018",10,"I048", -0.0001, 0.0, 18.25, 0, "ONLY");
+ gMC->Gspos("I018",11,"I048", -0.0001, 0.0, 25.55, 0, "ONLY");
+ gMC->Gspos("I018",12,"I048", -0.0001, 0.0, -10.95, 0, "ONLY");
+ gMC->Gspos("I018",13,"I048", -0.0001, 0.0, -18.25, 0, "ONLY");
+ gMC->Gspos("I018",14,"I048", -0.0001, 0.0, -25.55, 0, "ONLY");
+ gMC->Gspos("I024", 4,"I048", -0.0001, 0.0, -31.925, idrotm[355], "ONLY");
+ HVname[0] = 'I';
+ HVname[1] = '4';
+ HVname[2] = '1';
+ HVname[4] = '\0';
+ for (iSDD=0; iSDD<4; iSDD++) {
+ HVname[3] = (Char_t)(48+iSDD+5);
+ dits[0] = 1.350000;
+ dits[1] = I425dits[1];
+ dits[2] = (I048dits[2] - 2*I024dits[2] - Z_SDD_lay4[iSDD])/2.;
+ gMC->Gsvolu(HVname, "BOX ", idtmed[279], dits, 3);
+ xHV = -0.0001;
+ yHV = -I048dits[1] + (2*iSDD+1)*dits[1];
+ zHV = I048dits[2] - 2*I024dits[2] - dits[2];
+ gMC->Gspos(HVname, 1,"I048", xHV, yHV, zHV, 0, "ONLY");
+ gMC->Gspos(HVname, 2,"I048", xHV, yHV, -zHV, 0, "ONLY");
+ gMC->Gspos("I425", indI425++,"I048", xI424, yHV, 31.925, 0, "ONLY");
+ gMC->Gspos("I425", indI425++,"I048", -xI424, yHV, -31.925, 0, "ONLY");
+ }
+ LVname[0] = 'I';
+ LVname[1] = '4';
+ LVname[2] = '1';
+ LVname[4] = '\0';
+ for (iSDD=0; iSDD<4; iSDD++) {
+ LVname[3] = (Char_t)(48+iSDD+1);
+ dits[0] = 1.350000;
+ dits[1] = 0.004423;
+ dits[2] = (I048dits[2] - (2*iSDD+1)*I018dits[2] - I039dits[2])/2.;
+ gMC->Gsvolu(LVname, "BOX ", idtmed[280], dits, 3);
+ yLV = I018dits[1] - dits[0]*cos30 - dits[1]*sin30;
+ xLV = xI050 -
+ fabs(yI050-yLV)*sin30/cos30 +
+ (I050dits[1]+(2*iSDD+1)*dits[1])/cos30;
+ zLV = I048dits[2] - dits[2];
+ gMC->Gspos(LVname, 1,"I048", xLV, yLV, zLV, idrotm[346], "ONLY");
+ gMC->Gspos(LVname, 2,"I048", xLV, yLV, -zLV, idrotm[346], "ONLY");
+ gMC->Gspos(LVname, 3,"I048", -xLV, yLV, zLV, idrotm[347], "ONLY");
+ gMC->Gspos(LVname, 4,"I048", -xLV, yLV, -zLV, idrotm[347], "ONLY");
+ }
+
+
+ // -- build the SDD barrel (layers 3 and 4)
+
+ gMC->Gspos("I047", 1,"IT34", -3.7528, 16.4422, 0.0, idrotm[321], "ONLY");
+ gMC->Gspos("I047", 2,"IT34",-10.8892, 13.6547, 0.0, idrotm[333], "ONLY");
+ gMC->Gspos("I047", 3,"IT34",-15.1948, 7.3175, 0.0, idrotm[336], "ONLY");
+ gMC->Gspos("I047", 4,"IT34",-17.465, 0.0, 0.0, idrotm[350], "ONLY");
+ gMC->Gspos("I047", 5,"IT34",-15.1948, -7.3174, 0.0, idrotm[313], "ONLY");
+ gMC->Gspos("I047", 6,"IT34",-10.8893, -13.6547, 0.0, idrotm[311], "ONLY");
+ gMC->Gspos("I047", 7,"IT34", -3.7528, -16.4422, 0.0, idrotm[310], "ONLY");
+ gMC->Gspos("I047", 8,"IT34", 3.8863, -17.0271, 0.0, idrotm[386], "ONLY");
+ gMC->Gspos("I047", 9,"IT34", 10.5152, -13.1856, 0.0, idrotm[309], "ONLY");
+ gMC->Gspos("I047",10,"IT34", 15.7354, -7.5778, 0.0, idrotm[308], "ONLY");
+ gMC->Gspos("I047",11,"IT34", 16.865, 0.0, 0.0, idrotm[356], "ONLY");
+ gMC->Gspos("I047",12,"IT34", 15.7354, 7.5778, 0.0, idrotm[307], "ONLY");
+ gMC->Gspos("I047",13,"IT34", 10.5152, 13.1856, 0.0, idrotm[306], "ONLY");
+ gMC->Gspos("I047",14,"IT34", 3.8863, 17.0271, 0.0, idrotm[305], "ONLY");
+
+ gMC->Gspos("I048", 1,"IT34", -3.6667, 25.5027, 0.0, idrotm[335], "ONLY");
+ gMC->Gspos("I048", 2,"IT34",-10.9317, 23.937, 0.0, idrotm[332], "ONLY");
+ gMC->Gspos("I048", 3,"IT34",-16.8725, 19.4719, 0.0, idrotm[331], "ONLY");
+ gMC->Gspos("I048", 4,"IT34",-22.1376, 14.227, 0.0, idrotm[366], "ONLY");
+ gMC->Gspos("I048", 5,"IT34",-24.7213, 7.2588, 0.0, idrotm[330], "ONLY");
+ gMC->Gspos("I048", 6,"IT34",-26.315, 0.0, 0.0, idrotm[350], "ONLY");
+ gMC->Gspos("I048", 7,"IT34",-24.7213, -7.2588, 0.0, idrotm[329], "ONLY");
+ gMC->Gspos("I048", 8,"IT34",-22.1376, -14.227, 0.0, idrotm[328], "ONLY");
+ gMC->Gspos("I048", 9,"IT34",-16.8725, -19.4719, 0.0, idrotm[327], "ONLY");
+ gMC->Gspos("I048",10,"IT34",-10.9316, -23.937, 0.0, idrotm[326], "ONLY");
+ gMC->Gspos("I048",11,"IT34", -3.6667, -25.5027, 0.0, idrotm[325], "ONLY");
+ gMC->Gspos("I048",12,"IT34", 3.745, -26.0472, 0.0, idrotm[324], "ONLY");
+ gMC->Gspos("I048",13,"IT34", 10.7032, -23.4367, 0.0, idrotm[323], "ONLY");
+ gMC->Gspos("I048",14,"IT34", 17.2327, -19.8876, 0.0, idrotm[322], "ONLY");
+ gMC->Gspos("I048",15,"IT34", 21.6749, -13.9296, 0.0, idrotm[320], "ONLY");
+ gMC->Gspos("I048",16,"IT34", 25.2491, -7.4138, 0.0, idrotm[319], "ONLY");
+ gMC->Gspos("I048",17,"IT34", 25.765, 0.0, 0.0, idrotm[318], "ONLY");
+ gMC->Gspos("I048",18,"IT34", 25.2491, 7.4138, 0.0, idrotm[317], "ONLY");
+ gMC->Gspos("I048",19,"IT34", 21.6749, 13.9296, 0.0, idrotm[316], "ONLY");
+ gMC->Gspos("I048",20,"IT34", 17.2327, 19.8876, 0.0, idrotm[315], "ONLY");
+ gMC->Gspos("I048",21,"IT34", 10.7032, 23.4367, 0.0, idrotm[314], "ONLY");
+ gMC->Gspos("I048",22,"IT34", 3.745, 26.0472, 0.0, idrotm[334], "ONLY");
// --- Place SSD volumes into their mother volume IT56
//gMC->Gspos("IC03",2,"ITSD",0.0,0.0,-25.-17.5-7.875,idrotm[200],"ONLY");
- // --- Place volumes of shield between SDD and SSD
+ // --- Place volumes of cylinders between SPD and SDD and SDD and SSD
-
- gMC->Gspos("ICY2",1,"ITSD",0.0,0.0,-0.7,0,"ONLY");
+ gMC->Gspos("ICY1",1,"ITSD",0.0,0.0,0.,0,"ONLY");
+ gMC->Gspos("ICY2",1,"ITSD",0.0,0.0,0.,0,"ONLY");
// --- Place volumes of SDD cone ----------------------------------
gMC->Gspos("I093",1,"IS02",0.0,0.0,0.0,0,"MANY");
gMC->Gspos("I093",2,"IS02",0.0,0.0,0.0,idrotm[856],"MANY");
- gMC->Gspos("I099",4,"IS02",0.0,0.0,0.0,idrotm[857],"ONLY");
- gMC->Gspos("I099",3,"IS02",0.0,0.0,0.0,idrotm[858],"ONLY");
- gMC->Gspos("I099",5,"IS02",0.0,0.0,0.0,idrotm[859],"ONLY");
- gMC->Gspos("I099",6,"IS02",0.0,0.0,0.0,idrotm[860],"ONLY");
- gMC->Gspos("I099",7,"IS02",0.0,0.0,0.0,idrotm[861],"ONLY");
- gMC->Gspos("I099",2,"IS02",0.0,0.0,0.0,idrotm[862],"ONLY");
- gMC->Gspos("I200",4,"IS02",0.0,0.0,0.0,idrotm[863],"ONLY");
- gMC->Gspos("I200",3,"IS02",0.0,0.0,0.0,idrotm[864],"ONLY");
- gMC->Gspos("I200",2,"IS02",0.0,0.0,0.0,idrotm[865],"ONLY");
- gMC->Gspos("I200",13,"IS02",0.0,0.0,0.0,idrotm[867],"ONLY");
- gMC->Gspos("I200",12,"IS02",0.0,0.0,0.0,idrotm[869],"ONLY");
- gMC->Gspos("I200",11,"IS02",0.0,0.0,0.0,idrotm[870],"ONLY");
- gMC->Gspos("I200",10,"IS02",0.0,0.0,0.0,idrotm[871],"ONLY");
- gMC->Gspos("I200",9,"IS02",0.0,0.0,0.0,idrotm[872],"ONLY");
- gMC->Gspos("I200",8,"IS02",0.0,0.0,0.0,idrotm[873],"ONLY");
- gMC->Gspos("I200",7,"IS02",0.0,0.0,0.0,idrotm[874],"ONLY");
- gMC->Gspos("I200",6,"IS02",0.0,0.0,0.0,idrotm[875],"ONLY");
- gMC->Gspos("I200",5,"IS02",0.0,0.0,0.0,idrotm[876],"ONLY");
- gMC->Gspos("I090",2,"IS02",0.0,0.0,-39.15,0,"ONLY");
- //gMC->Gspos("I089",1,"IS02",0.0,0.0,0.0,0,"ONLY"); // old cylind. shield
- gMC->Gspos("I090",1,"IS02",0.0,0.0,39.15,idrotm[856],"ONLY");
+ gMC->Gspos("I099",4,"IS02",0.0,0.0,0.0,idrotm[857],"MANY");
+ gMC->Gspos("I099",3,"IS02",0.0,0.0,0.0,idrotm[858],"MANY");
+ gMC->Gspos("I099",5,"IS02",0.0,0.0,0.0,idrotm[859],"MANY");
+ gMC->Gspos("I099",6,"IS02",0.0,0.0,0.0,idrotm[860],"MANY");
+ gMC->Gspos("I099",7,"IS02",0.0,0.0,0.0,idrotm[861],"MANY");
+ gMC->Gspos("I099",2,"IS02",0.0,0.0,0.0,idrotm[862],"MANY");
+ gMC->Gspos("I200",4,"IS02",0.0,0.0,0.0,idrotm[863],"MANY");
+ gMC->Gspos("I200",3,"IS02",0.0,0.0,0.0,idrotm[864],"MANY");
+ gMC->Gspos("I200",2,"IS02",0.0,0.0,0.0,idrotm[865],"MANY");
+ gMC->Gspos("I200",13,"IS02",0.0,0.0,0.0,idrotm[867],"MANY");
+ gMC->Gspos("I200",12,"IS02",0.0,0.0,0.0,idrotm[869],"MANY");
+ gMC->Gspos("I200",11,"IS02",0.0,0.0,0.0,idrotm[870],"MANY");
+ gMC->Gspos("I200",10,"IS02",0.0,0.0,0.0,idrotm[871],"MANY");
+ gMC->Gspos("I200",9,"IS02",0.0,0.0,0.0,idrotm[872],"MANY");
+ gMC->Gspos("I200",8,"IS02",0.0,0.0,0.0,idrotm[873],"MANY");
+ gMC->Gspos("I200",7,"IS02",0.0,0.0,0.0,idrotm[874],"MANY");
+ gMC->Gspos("I200",6,"IS02",0.0,0.0,0.0,idrotm[875],"MANY");
+ gMC->Gspos("I200",5,"IS02",0.0,0.0,0.0,idrotm[876],"MANY");
+ gMC->Gspos("I090",2,"IS02",0.0,0.0,-39.4,0,"ONLY");
+ gMC->Gspos("I090",1,"IS02",0.0,0.0,39.4,idrotm[856],"ONLY");
gMC->Gspos("I099",9,"IS02",0.0,0.0,0.0,idrotm[877],"ONLY");
gMC->Gspos("I099",8,"IS02",0.0,0.0,0.0,idrotm[879],"ONLY");
gMC->Gspos("I099",1,"IS02",0.0,0.0,0.0,idrotm[880],"ONLY");
gMC->Gspos("I200",21,"IS02",0.0,0.0,0.0,idrotm[892],"ONLY");
gMC->Gspos("I200",20,"IS02",0.0,0.0,0.0,idrotm[868],"ONLY");
gMC->Gspos("I200",19,"IS02",0.0,0.0,0.0,idrotm[893],"ONLY");
- gMC->Gspos("I098",1,"IS02",0.0,0.0,32.1,0,"ONLY");
- gMC->Gspos("I097",1,"IS02",0.0,0.0,25.1,0,"ONLY");
- gMC->Gspos("I097",2,"IS02",0.0,0.0,-25.1,idrotm[856],"ONLY");
- gMC->Gspos("I098",2,"IS02",0.0,0.0,-32.1,idrotm[856],"ONLY");
+ gMC->Gspos("I098",1,"IS02",0.0,0.0,33.6,0,"ONLY");
+ gMC->Gspos("I097",1,"IS02",0.0,0.0,26.6,0,"ONLY");
+ gMC->Gspos("I097",2,"IS02",0.0,0.0,-26.6,idrotm[856],"ONLY");
+ gMC->Gspos("I098",2,"IS02",0.0,0.0,-33.6,idrotm[856],"ONLY");
gMC->Gspos("I202",1,"IS02",12.1,0.0,33.84,0,"ONLY");
gMC->Gspos("I202",6,"IS02",-6.05,-10.4789,33.84,idrotm[930],"ONLY");
gMC->Gspos("I202",5,"IS02",-6.05,10.4789,33.84,idrotm[929],"ONLY");
// --- Place volumes of SSD cone ----------------------------------
- gMC->Gspos("I212",2,"IS01",0.0,0.0,0.0,idrotm[701],"MANY"); // old z=-1.4
+ gMC->Gspos("I212",2,"IS01",0.0,0.0,0.0,idrotm[701],"MANY");
gMC->Gspos("I212",1,"IS01",0.0,0.0,0.0,0,"MANY");
- //gMC->Gspos("I210",1,"IS01",0.0,0.0,-0.7,0,"ONLY"); // old cylind. shield
gMC->Gspos("I211",1,"IS01",0.0,0.0,-56.5,0,"ONLY");
- gMC->Gspos("I217",1,"IS01",0.0,0.0,-47.75,0,"ONLY");
- gMC->Gspos("I218",1,"IS01",0.0,0.0,-47.75,0,"ONLY");
- gMC->Gspos("I219",1,"IS01",0.0,0.0,-53.6,0,"ONLY");
- gMC->Gspos("I220",1,"IS01",0.0,0.0,-53.6,0,"ONLY");
- gMC->Gspos("I211",2,"IS01",0.0,0.0,55.1,idrotm[701],"ONLY");
- gMC->Gspos("I219",2,"IS01",0.0,0.0,52.2,idrotm[701],"ONLY");
- gMC->Gspos("I220",2,"IS01",0.0,0.0,52.2,idrotm[701],"ONLY");
- gMC->Gspos("I217",2,"IS01",0.0,0.0,46.35,idrotm[701],"ONLY");
- gMC->Gspos("I218",2,"IS01",0.0,0.0,46.35,idrotm[701],"ONLY");
- gMC->Gspos("I214",2,"IS01",0.0,0.0,65.85,idrotm[701],"ONLY");
- gMC->Gspos("I213",2,"IS01",0.0,0.0,60.85,idrotm[701],"ONLY");
- gMC->Gspos("I213",1,"IS01",0.0,0.0,-62.25,0,"ONLY");
- gMC->Gspos("I214",1,"IS01",0.0,0.0,-67.25,0,"ONLY");
- gMC->Gspos("I215",19,"IS01",0.0,0.0,-1.4,idrotm[702],"ONLY");
- gMC->Gspos("I215",21,"IS01",0.0,0.0,-1.4,idrotm[703],"ONLY");
- gMC->Gspos("I215",23,"IS01",0.0,0.0,-1.4,idrotm[704],"ONLY");
- gMC->Gspos("I215",24,"IS01",0.0,0.0,-1.4,idrotm[705],"ONLY");
- gMC->Gspos("I215",3,"IS01",0.0,0.0,-1.4,idrotm[706],"ONLY");
- gMC->Gspos("I215",5,"IS01",0.0,0.0,-1.4,idrotm[707],"ONLY");
- gMC->Gspos("I215",7,"IS01",0.0,0.0,-1.4,idrotm[708],"ONLY");
- gMC->Gspos("I215",9,"IS01",0.0,0.0,-1.4,idrotm[709],"ONLY");
- gMC->Gspos("I215",11,"IS01",0.0,0.0,-1.4,idrotm[710],"ONLY");
- gMC->Gspos("I215",13,"IS01",0.0,0.0,-1.4,idrotm[711],"ONLY");
- gMC->Gspos("I215",15,"IS01",0.0,0.0,-1.4,idrotm[712],"ONLY");
- gMC->Gspos("I215",17,"IS01",0.0,0.0,-1.4,idrotm[713],"ONLY");
- gMC->Gspos("I216",9,"IS01",0.0,0.0,45.35,idrotm[714],"ONLY");
- gMC->Gspos("I216",11,"IS01",0.0,0.0,45.35,idrotm[715],"ONLY");
- gMC->Gspos("I216",12,"IS01",0.0,0.0,45.35,idrotm[716],"ONLY");
- gMC->Gspos("I216",3,"IS01",0.0,0.0,45.35,idrotm[717],"ONLY");
- gMC->Gspos("I216",5,"IS01",0.0,0.0,45.35,idrotm[718],"ONLY");
- gMC->Gspos("I216",7,"IS01",0.0,0.0,45.35,idrotm[719],"ONLY");
- gMC->Gspos("I216",10,"IS01",0.0,0.0,-46.75,idrotm[720],"ONLY");
- gMC->Gspos("I216",1,"IS01",0.0,0.0,-46.75,idrotm[721],"ONLY");
- gMC->Gspos("I216",2,"IS01",0.0,0.0,-46.75,idrotm[722],"ONLY");
- gMC->Gspos("I216",4,"IS01",0.0,0.0,-46.75,idrotm[723],"ONLY");
- gMC->Gspos("I216",6,"IS01",0.0,0.0,-46.75,idrotm[724],"ONLY");
- gMC->Gspos("I216",8,"IS01",0.0,0.0,-46.75,idrotm[725],"ONLY");
- gMC->Gspos("I215",1,"IS01",0.0,0.0,0.0,idrotm[726],"ONLY");
- gMC->Gspos("I215",2,"IS01",0.0,0.0,0.0,idrotm[727],"ONLY");
- gMC->Gspos("I215",4,"IS01",0.0,0.0,0.0,idrotm[728],"ONLY");
- gMC->Gspos("I215",6,"IS01",0.0,0.0,0.0,idrotm[729],"ONLY");
- gMC->Gspos("I215",8,"IS01",0.0,0.0,0.0,idrotm[733],"ONLY");
- gMC->Gspos("I215",10,"IS01",0.0,0.0,0.0,idrotm[730],"ONLY");
- gMC->Gspos("I215",12,"IS01",0.0,0.0,0.0,idrotm[731],"ONLY");
- gMC->Gspos("I215",14,"IS01",0.0,0.0,0.0,idrotm[768],"ONLY");
- gMC->Gspos("I215",16,"IS01",0.0,0.0,0.0,idrotm[732],"ONLY");
- gMC->Gspos("I215",18,"IS01",0.0,0.0,0.0,idrotm[734],"ONLY");
- gMC->Gspos("I215",20,"IS01",0.0,0.0,0.0,idrotm[798],"ONLY");
- gMC->Gspos("I215",22,"IS01",0.0,0.0,0.0,idrotm[735],"ONLY");
+ gMC->Gspos("I217",1,"IS01",0.0,0.0,-44.4,0,"ONLY"); // this will change after PPR to be symmetric
+ gMC->Gspos("I219",1,"IS01",0.0,0.0,-50.25,0,"ONLY"); // this will change after PPR to be symmetric
+ gMC->Gspos("I211",2,"IS01",0.0,0.0,56.5,idrotm[701],"ONLY");
+ gMC->Gspos("I219",2,"IS01",0.0,0.0,51.65,idrotm[701],"ONLY"); // this will change after PPR to be symmetric
+ gMC->Gspos("I217",2,"IS01",0.0,0.0,45.8,idrotm[701],"ONLY"); // this will change after PPR to be symmetric
+ gMC->Gspos("I214",2,"IS01",0.0,0.0,67.25,idrotm[701],"ONLY");
+ gMC->Gspos("I213",2,"IS01",0.0,0.0,62.25,idrotm[701],"ONLY");
+ gMC->Gspos("I213",1,"IS01",0.0,0.0,-62.25,0,"ONLY");
+ gMC->Gspos("I214",1,"IS01",0.0,0.0,-67.25,0,"ONLY");
+ gMC->Gspos("I215",19,"IS01",0.0,0.0,0.0,idrotm[702],"MANY");
+ gMC->Gspos("I215",21,"IS01",0.0,0.0,0.0,idrotm[703],"MANY");
+ gMC->Gspos("I215",23,"IS01",0.0,0.0,0.0,idrotm[704],"MANY");
+ gMC->Gspos("I215",24,"IS01",0.0,0.0,0.0,idrotm[705],"MANY");
+ gMC->Gspos("I215",3,"IS01",0.0,0.0,0.0,idrotm[706],"MANY");
+ gMC->Gspos("I215",5,"IS01",0.0,0.0,0.0,idrotm[707],"MANY");
+ gMC->Gspos("I215",7,"IS01",0.0,0.0,0.0,idrotm[708],"MANY");
+ gMC->Gspos("I215",9,"IS01",0.0,0.0,0.0,idrotm[709],"MANY");
+ gMC->Gspos("I215",11,"IS01",0.0,0.0,0.0,idrotm[710],"MANY");
+ gMC->Gspos("I215",13,"IS01",0.0,0.0,0.0,idrotm[711],"MANY");
+ gMC->Gspos("I215",15,"IS01",0.0,0.0,0.0,idrotm[712],"MANY");
+ gMC->Gspos("I215",17,"IS01",0.0,0.0,0.0,idrotm[713],"MANY");
+ gMC->Gspos("I216",9,"IS01",0.0,0.0,45.5,idrotm[714],"ONLY");
+ gMC->Gspos("I216",11,"IS01",0.0,0.0,45.5,idrotm[715],"ONLY");
+ gMC->Gspos("I216",12,"IS01",0.0,0.0,45.5,idrotm[716],"ONLY");
+ gMC->Gspos("I216",3,"IS01",0.0,0.0,45.5,idrotm[717],"ONLY");
+ gMC->Gspos("I216",5,"IS01",0.0,0.0,45.5,idrotm[718],"ONLY");
+ gMC->Gspos("I216",7,"IS01",0.0,0.0,45.5,idrotm[719],"ONLY");
+ gMC->Gspos("I216",10,"IS01",0.0,0.0,-44,idrotm[720],"ONLY");
+ gMC->Gspos("I216",1,"IS01",0.0,0.0,-44,idrotm[721],"ONLY");
+ gMC->Gspos("I216",2,"IS01",0.0,0.0,-44,idrotm[722],"ONLY");
+ gMC->Gspos("I216",4,"IS01",0.0,0.0,-44,idrotm[723],"ONLY");
+ gMC->Gspos("I216",6,"IS01",0.0,0.0,-44,idrotm[724],"ONLY");
+ gMC->Gspos("I216",8,"IS01",0.0,0.0,-44,idrotm[725],"ONLY");
+ gMC->Gspos("I215",1,"IS01",0.0,0.0,0.0,idrotm[726],"MANY");
+ gMC->Gspos("I215",2,"IS01",0.0,0.0,0.0,idrotm[727],"MANY");
+ gMC->Gspos("I215",4,"IS01",0.0,0.0,0.0,idrotm[728],"MANY");
+ gMC->Gspos("I215",6,"IS01",0.0,0.0,0.0,idrotm[729],"MANY");
+ gMC->Gspos("I215",8,"IS01",0.0,0.0,0.0,idrotm[733],"MANY");
+ gMC->Gspos("I215",10,"IS01",0.0,0.0,0.0,idrotm[730],"MANY");
+ gMC->Gspos("I215",12,"IS01",0.0,0.0,0.0,idrotm[731],"MANY");
+ gMC->Gspos("I215",14,"IS01",0.0,0.0,0.0,idrotm[768],"MANY");
+ gMC->Gspos("I215",16,"IS01",0.0,0.0,0.0,idrotm[732],"MANY");
+ gMC->Gspos("I215",18,"IS01",0.0,0.0,0.0,idrotm[734],"MANY");
+ gMC->Gspos("I215",20,"IS01",0.0,0.0,0.0,idrotm[798],"MANY");
+ gMC->Gspos("I215",22,"IS01",0.0,0.0,0.0,idrotm[735],"MANY");
// --- Place subdetectors' mother volumes and supports' mother volumes
// --- DEFINE CABLES AT THE END OF THE ITS CONES - COPPER PART
-
- dgh[0] = 45.;
- dgh[1] = 45.+1.0;
+ // UPPER PART
+
+ dgh[0] = 46.;
+ dgh[1] = 46.+1.0;
dgh[2] = 9.5;
+ dgh[3] = 12.;
+ dgh[4] = 168.;
+
+ gMC->Gsvolu("I1CU", "TUBS", idtmed[213], dgh, 5);
+ gMC->Gspos("I1CU", 1, "ITSV", 0., 0., 83.5, 0, "ONLY");
+ gMC->Gspos("I1CU", 2, "ITSV", 0., 0., -83.5, idrotm[200], "ONLY");
- gMC->Gsvolu("ICCU", "TUBE", idtmed[213], dgh, 3);
- gMC->Gspos("ICCU", 1, "ITSV", 0., 0., 86.7, 0, "ONLY");
- gMC->Gspos("ICCU", 2, "ITSV", 0., 0., -86.7, idrotm[200], "ONLY");
+ // --- DEFINE CABLES AT THE END OF THE ITS CONES - COPPER PART
+ // LOWER PART
+
+ dgh[0] = 46.;
+ dgh[1] = 46.+1.0;
+ dgh[2] = 9.5;
+ dgh[3] = 192.;
+ dgh[4] = 348.;
+ gMC->Gsvolu("I2CU", "TUBS", idtmed[213], dgh, 5);
+ gMC->Gspos("I2CU", 1, "ITSV", 0., 0., 83.5, 0, "ONLY");
+ gMC->Gspos("I2CU", 2, "ITSV", 0., 0., -83.5, idrotm[200], "ONLY");
+
+
// --- DEFINE CABLES AT THE END OF THE ITS CONES - CARBON PART
+ // UPPER PART
- dgh[0] = 45.+1.0;
- dgh[1] = 45.+1.0+1.5;
+ dgh[0] = 46.+1.0;
+ dgh[1] = 46.+1.0+1.5;
dgh[2] = 9.5;
+ dgh[3] = 12.;
+ dgh[4] = 168.;
+
+ gMC->Gsvolu("I1CC", "TUBS", idtmed[225], dgh, 5);
+ gMC->Gspos("I1CC", 1, "ITSV", 0., 0., 83.5, 0, "ONLY");
+ gMC->Gspos("I1CC", 2, "ITSV", 0., 0., -83.5, idrotm[200], "ONLY");
+
+ // --- DEFINE CABLES AT THE END OF THE ITS CONES - CARBON PART
+ // LOWER PART
- gMC->Gsvolu("ICCC", "TUBE", idtmed[225], dgh, 3);
- gMC->Gspos("ICCC", 1, "ITSV", 0., 0., 86.7, 0, "ONLY");
- gMC->Gspos("ICCC", 2, "ITSV", 0., 0., -86.7, idrotm[200], "ONLY");
+ dgh[0] = 46.+1.0;
+ dgh[1] = 46.+1.0+1.5;
+ dgh[2] = 9.5;
+ dgh[3] = 192.;
+ dgh[4] = 348.;
+ gMC->Gsvolu("I2CC", "TUBS", idtmed[225], dgh, 5);
+ gMC->Gspos("I2CC", 1, "ITSV", 0., 0., 83.5, 0, "ONLY");
+ gMC->Gspos("I2CC", 2, "ITSV", 0., 0., -83.5, idrotm[200], "ONLY");
+
+
// --- DEFINE PATCH PANELS AT THE END OF THE ITS CONES
+ // UPPER PART
- dgh[0] = 45.;
+ dgh[0] = 46.;
dgh[1] = 56.;
dgh[2] = 2.25;
+ dgh[3] = 12.;
+ dgh[4] = 168.;
+
+ gMC->Gsvolu("IPA1", "TUBS", idtmed[210], dgh, 5);
+ gMC->Gspos("IPA1", 1, "ITSV", 0., 0., 95.25, 0, "ONLY");
+ gMC->Gspos("IPA1", 2, "ITSV", 0., 0., -95.25, idrotm[200], "ONLY");
+
+ // --- DEFINE PATCH PANELS AT THE END OF THE ITS CONES
+ // LOWER PART
- gMC->Gsvolu("IPAN", "TUBE", idtmed[210], dgh, 3);
- gMC->Gspos("IPAN", 1, "ITSV", 0., 0., 98.45, 0, "ONLY");
- gMC->Gspos("IPAN", 2, "ITSV", 0., 0., -98.45, idrotm[200], "ONLY");
+ dgh[0] = 46.;
+ dgh[1] = 56.;
+ dgh[2] = 2.25;
+ dgh[3] = 192.;
+ dgh[4] = 348.;
+ gMC->Gsvolu("IPA2", "TUBS", idtmed[210], dgh, 5);
+ gMC->Gspos("IPA2", 1, "ITSV", 0., 0., 95.25, 0, "ONLY");
+ gMC->Gspos("IPA2", 2, "ITSV", 0., 0., -95.25, idrotm[200], "ONLY");
+
+
// --- DEFINE CABLES/COOLING BELOW THE TPC ON THE ABSORBER SIDE - COPPER PART
// UPPER PART
- dgh[0] = (xltpc-100.7)/2.;
- dgh[1] = 45.2;
- dgh[2] = 45.2+1.0;
- dgh[3] = 61.8;
- dgh[4] = 61.8+1.0;
+ dgh[0] = (ztpc-97.5)/2.;
+ dgh[1] = 46.2;
+ dgh[2] = 46.2+1.0;
+ dgh[3] = 62.3;
+ dgh[4] = 62.3+1.0;
dgh[5] = 12.;
dgh[6] = 168.;
gMC->Gsvolu("ICU1", "CONS", idtmed[213], dgh, 7);
- gMC->Gspos("ICU1", 1, "ITSV", 0., 0., 100.7+dgh[0], 0, "ONLY");
+ gMC->Gspos("ICU1", 1, "ITSV", 0., 0., 97.5+dgh[0], 0, "ONLY");
// --- DEFINE CABLES/COOLING BELOW THE TPC ON THE ABSORBER SIDE - COPPER PART
// LOWER PART
- dgh[0] = (xltpc-100.7)/2.;
- dgh[1] = 45.2;
- dgh[2] = 45.2+1.0;
- dgh[3] = 61.8;
- dgh[4] = 61.8+1.0;
+ dgh[0] = (ztpc-97.5)/2.;
+ dgh[1] = 46.2;
+ dgh[2] = 46.2+1.0;
+ dgh[3] = 62.3;
+ dgh[4] = 62.3+1.0;
dgh[5] = 192.;
dgh[6] = 348.;
gMC->Gsvolu("ICU2", "CONS", idtmed[213], dgh, 7);
- gMC->Gspos("ICU2", 1, "ITSV", 0., 0., 100.7+dgh[0], 0, "ONLY");
+ gMC->Gspos("ICU2", 1, "ITSV", 0., 0., 97.5+dgh[0], 0, "ONLY");
// --- DEFINE CABLES/COOLING BELOW THE TPC ON THE ABSORBER SIDE - CARBON PART
// UPPER PART
- dgh[0] = (xltpc-100.7)/2.;
- dgh[1] = 45.2+1.0;
- dgh[2] = 45.2+1.0+1.5;
- dgh[3] = 61.8+1.0;
- dgh[4] = 61.8+1.0+1.5;
+ dgh[0] = (ztpc-97.5)/2.;
+ dgh[1] = 46.2+1.0;
+ dgh[2] = 46.2+1.0+1.5;
+ dgh[3] = 62.3+1.0;
+ dgh[4] = 62.3+1.0+1.5;
dgh[5] = 12.;
dgh[6] = 168.;
gMC->Gsvolu("ICC1", "CONS", idtmed[225], dgh, 7);
- gMC->Gspos("ICC1", 1, "ITSV", 0., 0., 100.7+dgh[0], 0, "ONLY");
+ gMC->Gspos("ICC1", 1, "ITSV", 0., 0., 97.5+dgh[0], 0, "ONLY");
// --- DEFINE CABLES/COOLING BELOW THE TPC ON THE ABSORBER SIDE - CARBON PART
// LOWER PART
- dgh[0] = (xltpc-100.7)/2.;
- dgh[1] = 45.2+1.0;
- dgh[2] = 45.2+1.0+1.5;
- dgh[3] = 61.8+1.0;
- dgh[4] = 61.8+1.0+1.5;
+ dgh[0] = (ztpc-97.5)/2.;
+ dgh[1] = 46.2+1.0;
+ dgh[2] = 46.2+1.0+1.5;
+ dgh[3] = 62.3+1.0;
+ dgh[4] = 62.3+1.0+1.5;
dgh[5] = 192.;
dgh[6] = 348.;
gMC->Gsvolu("ICC2", "CONS", idtmed[225], dgh, 7);
- gMC->Gspos("ICC2", 1, "ITSV", 0., 0., 100.7+dgh[0], 0, "ONLY");
+ gMC->Gspos("ICC2", 1, "ITSV", 0., 0., 97.5+dgh[0], 0, "ONLY");
// --- DEFINE CABLES/COOLING BEHIND THE TPC ON THE ABSORBER SIDE - COPPER PART
// UPPER PART
- dgh[0] = 62.5;
+ dgh[0] = 62.1;
dgh[1] = 74.5;
dgh[2] = 0.5;
dgh[3] = 12.;
dgh[4] = 168.;
gMC->Gsvolu("ICU3", "TUBS", idtmed[213], dgh, 5);
- gMC->Gspos("ICU3", 1, "ITSV", 0., 0., xltpc+1.5+dgh[2], 0, "ONLY");
+ gMC->Gspos("ICU3", 1, "ITSV", 0., 0., ztpc+1.5+dgh[2], 0, "ONLY");
// --- DEFINE CABLES/COOLING BEHIND THE TPC ON THE ABSORBER SIDE - COPPER PART
// LOWER PART
- dgh[0] = 62.5;
+ dgh[0] = 62.1;
dgh[1] = 74.5;
dgh[2] = 0.5;
dgh[3] = 192.;
dgh[4] = 348.;
gMC->Gsvolu("ICU4", "TUBS", idtmed[213], dgh, 5);
- gMC->Gspos("ICU4", 1, "ITSV", 0., 0., xltpc+1.5+dgh[2], 0, "ONLY");
+ gMC->Gspos("ICU4", 1, "ITSV", 0., 0., ztpc+1.5+dgh[2], 0, "ONLY");
// --- DEFINE CABLES/COOLING BEHIND THE TPC ON THE ABSORBER SIDE - CARBON PART
// UPPER PART
- dgh[0] = 62.5;
+ dgh[0] = 62.1;
dgh[1] = 74.5;
dgh[2] = 0.75;
dgh[3] = 12.;
dgh[4] = 168.;
gMC->Gsvolu("ICC3", "TUBS", idtmed[225], dgh, 5);
- gMC->Gspos("ICC3", 1, "ITSV", 0., 0., xltpc+dgh[2], 0, "ONLY");
+ gMC->Gspos("ICC3", 1, "ITSV", 0., 0., ztpc+dgh[2], 0, "ONLY");
// --- DEFINE CABLES/COOLING BEHIND THE TPC ON THE ABSORBER SIDE - CARBON PART
// LOWER PART
- dgh[0] = 62.5;
+ dgh[0] = 62.1;
dgh[1] = 74.5;
dgh[2] = 0.75;
dgh[3] = 192.;
dgh[4] = 348.;
gMC->Gsvolu("ICC4", "TUBS", idtmed[225], dgh, 5);
- gMC->Gspos("ICC4", 1, "ITSV", 0., 0., xltpc+dgh[2], 0, "ONLY");
+ gMC->Gspos("ICC4", 1, "ITSV", 0., 0., ztpc+dgh[2], 0, "ONLY");
// --- DEFINE CABLES/COOLING BELOW THE TPC ON THE OTHER SIDE W.R.T.
// THE ABSORBER - COPPER PART - UPPER PART
- dgh[0] = 45.;
- dgh[1] = 45.+1.0;
- dgh[2] = (xltpc-100.7+1.5)/2.;
+ dgh[0] = 46.;
+ dgh[1] = 46.+1.0;
+ dgh[2] = (ztpc-97.5+1.5)/2.;
dgh[3] = 12.;
dgh[4] = 168.;
gMC->Gsvolu("ICU5", "TUBS", idtmed[213], dgh, 5);
- gMC->Gspos("ICU5", 1, "ITSV", 0., 0., -100.7-dgh[2], 0, "ONLY");
+ gMC->Gspos("ICU5", 1, "ITSV", 0., 0., -97.5-dgh[2], 0, "ONLY");
// --- DEFINE CABLES/COOLING BELOW THE TPC ON THE OTHER SIDE W.R.T.
// THE ABSORBER - COPPER PART - LOWER PART
- dgh[0] = 45.;
- dgh[1] = 45.+1.0;
- dgh[2] = (xltpc-100.7+1.5)/2.;
+ dgh[0] = 46.;
+ dgh[1] = 46.+1.0;
+ dgh[2] = (ztpc-97.5+1.5)/2.;
dgh[3] = 192.;
dgh[4] = 348.;
gMC->Gsvolu("ICU6", "TUBS", idtmed[213], dgh, 5);
- gMC->Gspos("ICU6", 1, "ITSV", 0., 0., -100.7-dgh[2], 0, "ONLY");
+ gMC->Gspos("ICU6", 1, "ITSV", 0., 0., -97.5-dgh[2], 0, "ONLY");
// --- DEFINE CABLES/COOLING BELOW THE TPC ON THE OTHER SIDE W.R.T.
// THE ABSORBER - CARBON PART - UPPER PART
- dgh[0] = 45.+1.0;
- dgh[1] = 45.+1.0+1.5;
- dgh[2] = (xltpc-100.7)/2.;
+ dgh[0] = 46.+1.0;
+ dgh[1] = 46.+1.0+1.5;
+ dgh[2] = (ztpc-97.5)/2.;
dgh[3] = 12.;
dgh[4] = 168.;
gMC->Gsvolu("ICC5", "TUBS", idtmed[225], dgh, 5);
- gMC->Gspos("ICC5", 1, "ITSV", 0., 0., -100.7-dgh[2], 0, "ONLY");
+ gMC->Gspos("ICC5", 1, "ITSV", 0., 0., -97.5-dgh[2], 0, "ONLY");
// --- DEFINE CABLES/COOLING BELOW THE TPC ON THE OTHER SIDE W.R.T.
// THE ABSORBER - CARBON PART - LOWER PART
- dgh[0] = 45.+1.0;
- dgh[1] = 45.+1.0+1.5;
- dgh[2] = (xltpc-100.7)/2.;
+ dgh[0] = 46.+1.0;
+ dgh[1] = 46.+1.0+1.5;
+ dgh[2] = (ztpc-97.5)/2.;
dgh[3] = 192.;
dgh[4] = 348.;
gMC->Gsvolu("ICC6", "TUBS", idtmed[225], dgh, 5);
- gMC->Gspos("ICC6", 1, "ITSV", 0., 0., -100.7-dgh[2], 0, "ONLY");
+ gMC->Gspos("ICC6", 1, "ITSV", 0., 0., -97.5-dgh[2], 0, "ONLY");
// --- DEFINE CABLES/COOLING BEHIND THE TPC ON OTHER SIDE W.R.T. THE ABSORBER
// COPPER PART - UPPER PART
- dgh[0] = 45.;
+ dgh[0] = 46.;
dgh[1] = 74.5;
dgh[2] = 0.5;
dgh[3] = 12.;
dgh[4] = 168.;
gMC->Gsvolu("ICU7", "TUBS", idtmed[213], dgh, 5);
- gMC->Gspos("ICU7", 1, "ITSV", 0., 0., -(xltpc+1.5+dgh[2]), 0, "ONLY");
+ gMC->Gspos("ICU7", 1, "ITSV", 0., 0., -(ztpc+1.5+dgh[2]), 0, "ONLY");
// --- DEFINE CABLES/COOLING BEHIND THE TPC ON OTHER SIDE W.R.T. THE ABSORBER
// COPPER PART - LOWER PART
- dgh[0] = 45.;
+ dgh[0] = 46.;
dgh[1] = 74.5;
dgh[2] = 0.5;
dgh[3] = 192.;
dgh[4] = 348.;
gMC->Gsvolu("ICU8", "TUBS", idtmed[213], dgh, 5);
- gMC->Gspos("ICU8", 1, "ITSV", 0., 0., -(xltpc+1.5+dgh[2]), 0, "ONLY");
+ gMC->Gspos("ICU8", 1, "ITSV", 0., 0., -(ztpc+1.5+dgh[2]), 0, "ONLY");
// --- DEFINE CABLES/COOLING BEHIND THE TPC ON OTHER SIDE W.R.T. THE ABSORBER
// CARBON PART - UPPER PART
- dgh[0] = 45.+1.0;
+ dgh[0] = 46.+1.0;
dgh[1] = 74.5;
dgh[2] = 0.75;
dgh[3] = 12.;
dgh[4] = 168.;
gMC->Gsvolu("ICC7", "TUBS", idtmed[225], dgh, 5);
- gMC->Gspos("ICC7", 1, "ITSV", 0., 0., -(xltpc+dgh[2]), 0, "ONLY");
+ gMC->Gspos("ICC7", 1, "ITSV", 0., 0., -(ztpc+dgh[2]), 0, "ONLY");
// --- DEFINE CABLES/COOLING BEHIND THE TPC ON OTHER SIDE W.R.T. THE ABSORBER
// CARBON PART - LOWER PART
- dgh[0] = 45.+1.0;
+ dgh[0] = 46.+1.0;
dgh[1] = 74.5;
dgh[2] = 0.75;
dgh[3] = 192.;
dgh[4] = 348.;
gMC->Gsvolu("ICC8", "TUBS", idtmed[225], dgh, 5);
- gMC->Gspos("ICC8", 1, "ITSV", 0., 0., -(xltpc+dgh[2]), 0, "ONLY");
+ gMC->Gspos("ICC8", 1, "ITSV", 0., 0., -(ztpc+dgh[2]), 0, "ONLY");
// --- DEFINE HOOK TO THE TPC ON OTHER SIDE W.R.T. THE ABSORBER - UPPER PART
dgh[3] = 12.;
dgh[4] = 168.;
gMC->Gsvolu("IHK1", "TUBS", idtmed[264], dgh, 5);
- gMC->Gspos("IHK1", 1, "ITSV", 0., 0., -xltpc-dgh[2], 0, "ONLY");
+ gMC->Gspos("IHK1", 1, "ITSV", 0., 0., -ztpc-dgh[2], 0, "ONLY");
// --- DEFINE HOOK TO THE TPC ON OTHER SIDE W.R.T. THE ABSORBER - LOWER PART
dgh[3] = 192.;
dgh[4] = 348.;
gMC->Gsvolu("IHK2", "TUBS", idtmed[264], dgh, 5);
- gMC->Gspos("IHK2", 1, "ITSV", 0., 0., -xltpc-dgh[2], 0, "ONLY");
+ gMC->Gspos("IHK2", 1, "ITSV", 0., 0., -ztpc-dgh[2], 0, "ONLY");
// --- DEFINE RAILS BETWEEN THE ITS AND THE TPC
- //dgh[0] = 0.85;
- //dgh[1] = 10.;
- //dgh[2] = 190.;
- //gMC->Gsvolu("IRAI", "BOX ", idtmed[210], dgh, 3);
- //gMC->Gspos("IRAI", 1, "ITSV", 53., 0., -69.5, 0, "ONLY");
- //gMC->Gspos("IRAI", 2, "ITSV", -53., 0., -69.5, 0, "ONLY");
+ if (rails == 1) {
+
+ dgh[0] = 2.;
+ dgh[1] = 8.;
+ dgh[2] = 190.;
+ gMC->Gsvolu("IRA1", "BOX ", idtmed[268], dgh, 3);
+ gMC->Gspos("IRA1", 1, "ITSV", 53.5, 0., -69.5, 0, "ONLY");
+ gMC->Gsvolu("IRA2", "BOX ", idtmed[268], dgh, 3);
+ gMC->Gspos("IRA2", 1, "ITSV", -53.5, 0., -69.5, 0, "ONLY");
+
+ dgh[0] = 2.-0.5; // 0.5 was determined in such a way that the aluminum area is 20.9 cm^2
+ dgh[1] = 8.-0.5; // 0.5 was determined in such a way that the aluminum area is 20.9 cm^2
+ dgh[2] = 190.;
+ gMC->Gsvolu("IRA3", "BOX ", idtmed[205], dgh, 3);
+ gMC->Gspos("IRA3", 1, "IRA1", 0., 0., 0., 0, "ONLY");
+ gMC->Gsvolu("IRA4", "BOX ", idtmed[205], dgh, 3);
+ gMC->Gspos("IRA4", 1, "IRA2", 0., 0., 0., 0, "ONLY");
+
+ }
// --- DEFINE CYLINDERS HOLDING RAILS BETWEEN THE ITS AND THE TPC
- dgh[0] = 58.;
+ dgh[0] = 56.9;
dgh[1] = 59.;
dgh[2] = 0.6;
gMC->Gsvolu("ICYL", "TUBE", idtmed[210], dgh, 3);
- gMC->Gspos("ICYL", 1, "ALIC", 0., 0., 74., 0, "ONLY");
- gMC->Gspos("ICYL", 2, "ALIC", 0., 0., -74., idrotm[200], "ONLY");
+ gMC->Gspos("ICYL", 1, "ALIC", 0., 0., 74.1, 0, "ONLY");
+ gMC->Gspos("ICYL", 2, "ALIC", 0., 0., -74.1, idrotm[200], "ONLY");
+
+ // --- DEFINE SUPPORTS FOR RAILS ATTACHED TO THE CYLINDERS
+
+ dgh[0] = 0.;
+ dgh[1] = 3.;
+ dgh[2] = 5.; // 5. comes from the fact that the volume has to be 567.6/2 cm^3
+ gMC->Gsvolu("ISR1", "TUBE", idtmed[284], dgh, 3);
+ gMC->Gspos("ISR1", 1, "ALIC", 54.9, 11., 79.5, 0, "ONLY");
+ gMC->Gspos("ISR1", 2, "ALIC", 54.9, -11., 79.5, 0, "ONLY");
+ gMC->Gspos("ISR1", 3, "ALIC", -54.9, 11., 79.5, 0, "ONLY");
+ gMC->Gspos("ISR1", 4, "ALIC", -54.9, -11., 79.5, 0, "ONLY");
+ gMC->Gspos("ISR1", 5, "ALIC", 54.9, 11., -79.5, 0, "ONLY");
+ gMC->Gspos("ISR1", 6, "ALIC", 54.9, -11., -79.5, 0, "ONLY");
+ gMC->Gspos("ISR1", 7, "ALIC", -54.9, 11., -79.5, 0, "ONLY");
+ gMC->Gspos("ISR1", 8, "ALIC", -54.9, -11., -79.5, 0, "ONLY");
+
+ // --- DEFINE SUPPORTS FOR RAILS ATTACHED TO THE ABSORBER
+
+ dgh[0] = 5.;
+ dgh[1] = 12.;
+ dgh[2] = 5.;
+ gMC->Gsvolu("ISR2", "BOX ", idtmed[210], dgh, 3);
+ gMC->Gspos("ISR2", 1, "ALIC", 53.5, 0., 125.5, 0, "ONLY");
+ gMC->Gsvolu("ISR3", "BOX ", idtmed[210], dgh, 3);
+ gMC->Gspos("ISR3", 1, "ALIC", -53.5, 0., 125.5, 0, "ONLY");
+
+ dgh[0] = 5.-2.;
+ dgh[1] = 12.-2.;
+ dgh[2] = 5.;
+ gMC->Gsvolu("ISR4", "BOX ", idtmed[205], dgh, 3);
+ gMC->Gspos("ISR4", 1, "ISR2", 0., 0., 0., 0, "ONLY");
+ gMC->Gsvolu("ISR5", "BOX ", idtmed[205], dgh, 3);
+ gMC->Gspos("ISR5", 1, "ISR3", 0., 0., 0., 0, "ONLY");
+
+ // --- DEFINE SUPPORTS TO ATTACH THE ITS TO THE TPC
+
+ dgh[0] = 0.;
+ dgh[1] = 5.;
+ dgh[2] = 2.;
+ gMC->Gsvolu("ISR6", "TUBE", idtmed[210], dgh, 3);
+ gMC->Gspos("ISR6", 1, "ALIC", 0., 54., 77., 0, "ONLY");
+ gMC->Gspos("ISR6", 2, "ALIC", 0., 54., -77., 0, "ONLY");
+ gMC->Gspos("ISR6", 3, "ALIC", 0., -54., -77., 0, "ONLY");
// --- Outputs the geometry tree in the EUCLID/CAD format
gMC->WriteEuclid("ITSgeometry", "ITSV", 1, 5);
}
-
-
}
//_____________________________________________________________________________
void AliITSvPPRasymm::CreateMaterials(){
Int_t isxfld = gAlice->Field()->Integ();
Float_t sxmgmx = gAlice->Field()->Max();
-
+
+ // Freon
+ Float_t afre[2] = { 12.011,18.9984032 };
+ Float_t zfre[2] = { 6.,9. };
+ Float_t wfre[2] = { 5.,12. };
+ Float_t densfre = 1.5;
+
// --- Define the various materials and media for GEANT ---
AliMaterial(1,"SI$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
AliMedium(4,"C (M55J)$",4,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
AliMaterial(5,"AIR$",0.14610E+02,0.73000E+01,0.12050E-02,0.30423E+05,0.99900E+03);
- AliMedium(5,"AIR$",5,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
+ AliMedium(5,"AIR$",5,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E-02,.10000E+01,0);
- AliMaterial(6,"GEN AIR$",0.14610E+02,0.73000E+01,0.12050E02,0.30423E+05,0.99900E+03);
+ AliMaterial(6,"GEN AIR$",0.14610E+02,0.73000E+01,0.12050E-02,0.30423E+05,0.99900E+03);
AliMedium(6,"GEN AIR$",6,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E-02,.10000E+01,0);
- AliMaterial(7,"SDD SI CHIP$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
+ AliMaterial(7,"SDD SI CHIP$",0.374952E+02,0.178184E+02,0.24485E+01,0.76931E+01,0.99900E+03);
AliMedium(7,"SDD SI CHIP$",7,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
- AliMaterial(9,"SDD C (M55J)$",0.12011E+02,0.60000E+01,0.1930E+01,0.22100E+02,0.99900E+03);
+ AliMaterial(9,"SDD C (M55J)$",0.123565E+02,0.64561E+01,0.18097E+01,0.229570E+02,0.99900E+03);
AliMedium(9,"SDD C (M55J)$",9,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
AliMaterial(10,"SDD AIR$",0.14610E+02,0.73000E+01,0.12050E-02,0.30423E+05,0.99900E+03);
AliMaterial(12,"WATER$",0.14322E+02,0.72167E+01,0.10000E+01,0.35759E+02,0.94951E+02);
AliMedium(12,"WATER$",12,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
+ AliMixture(13,"Freon$",afre,zfre,densfre,-2,wfre);
+ AliMedium(13,"Freon$",13,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
+
AliMaterial(14,"COPPER$",0.63546E+02,0.29000E+02,0.89600E+01,0.14300E+01,0.99900E+03);
AliMedium(14,"COPPER$",14,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
AliMaterial(65,"INOX$",0.55098E+02,0.2572E+02,0.7900E+01,0.17800E+01,0.99900E+03);
AliMedium(65,"INOX$",65,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
- AliMaterial(68,"ROHACELL$",0.12011E+02,0.60000E+01,0.9500E01,0.43600E+03,0.99900E+03);
+ AliMaterial(68,"ROHACELL$",0.123974E+02,0.62363E+01,0.500E-01,0.80986E+03,0.99900E+03);
AliMedium(68,"ROHACELL$",68,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
- AliMaterial(69,"SDD C AL (M55J)$",0.12011E+02,0.60000E+01,0.1930E+01,0.22100E+02,0.99900E+03);
+ AliMaterial(69,"SDD C AL (M55J)$",0.138802E+02,0.71315E+01,0.19837E+01,0.176542E+02,0.99900E+03);
AliMedium(69,"SDD C AL (M55J)$",69,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
AliMaterial(70,"SDDKAPTON (POLYCH2)$",0.14000E+02,0.71770E+01,0.13000E+01,0.31270E+02,0.99900E+03);
AliMaterial(76,"SPDBUS(AL+KPT+EPOX)$",0.19509E+02,0.96502E+01,0.19060E+01,0.15413E+02,0.99900E+03);
AliMedium(76,"SPDBUS(AL+KPT+EPOX)$",76,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
+
+ AliMaterial(77,"SDD X7R capacitors$",0.1157516E+03,0.477056E+02,0.67200E+01,0.14236E+01,0.99900E+03);
+ AliMedium(77,"SDD X7R capacitors$",77,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
+
+ AliMaterial(78,"SDD ruby sph. Al2O3$",0.218101E+02,0.106467E+02,0.39700E+01,0.48539E+01,0.99900E+03);
+ AliMedium(78,"SDD ruby sph. Al2O3$",78,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
+
+ AliMaterial(79,"SDD SI insensitive$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
+ AliMedium(79,"SDD SI insensitive$",79,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
+
+ AliMaterial(80,"SDD HV microcable$",0.159379E+02,0.78598E+01,0.16087E+01,0.217906E+02,0.99900E+03);
+ AliMedium(80,"SDD HV microcable$",80,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
+
+ AliMaterial(81,"SDD LV+signal cable$",0.223689E+02,0.108531+02,0.21035E+01,0.13440E+02,0.99900E+03);
+ AliMedium(81,"SDD LV+signal cable$",81,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
+
+ AliMaterial(82,"SDD hybrid microcab$",0.218254E+02,0.106001E+02,0.20502E+01,0.137308E+02,0.99900E+03);
+ AliMedium(82,"SDD hybrid microcab$",82,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
+
+ AliMaterial(83,"SDD anode microcab$",0.186438E+02,0.91193E+01,0.17854E+01,0.176451E+02,0.99900E+03);
+ AliMedium(83,"SDD anode microcab$",83,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
+
+ AliMaterial(84,"SDD/SSD rings$",0.123565E+02,0.64561E+01,0.18097E+01,0.229570E+02,0.99900E+03);
+ AliMedium(84,"SDD/SSD rings$",84,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
+
+ AliMaterial(85,"inox/alum$",0.321502E+02,0.153383E+02,0.30705E+01,0.69197E+01,0.99900E+03);
+ AliMedium(85,"inox/alum$",85,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
+
// Special media
AliMaterial(90,"SPD shield$", 12.011, 6., 1.93/10. , 22.1*10., 999);
AliMedium(90,"SPD shield$",90, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMaterial(91, "SPD End ladder$", 55.845, 26., 7.87/10., 1.76*10., 999);
+ AliMaterial(91, "SPD End ladder$", 47.0447, 21.7963, 3.6374, 4.4711, 999);
AliMedium(91, "SPD End ladder$",91, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
AliMaterial(92, "SPD cone$",28.0855, 14., 2.33, 9.36, 999);
} // end if
cout << "Reading Geometry transformation directly from Geant 3." << endl;
const Int_t nlayers = 6;
- const Int_t ndeep = 7;
+ const Int_t ndeep = 9;
Int_t itsGeomTreeNames[nlayers][ndeep],lnam[20],lnum[20];
Int_t nlad[nlayers],ndet[nlayers];
Double_t t[3],r[10];
Int_t npar,natt,idshape,imat,imed;
AliITSGeant3Geometry *ig = new AliITSGeant3Geometry();
Int_t mod,lay,lad,det,i,j,k;
- char *names[nlayers][ndeep] = {
- {"ALIC","ITSV","ITSD","IT12","I132","I131","ITS1"}, // lay=1
- {"ALIC","ITSV","ITSD","IT12","I132","I186","ITS2"}, // lay=2
- {"ALIC","ITSV","ITSD","IT34","I004","I302","ITS3"}, // lay=3
- {"ALIC","ITSV","ITSD","IT34","I005","I402","ITS4"}, // lay=4
- {"ALIC","ITSV","ITSD","IT56","I565","I562","ITS5"}, // lay=5
- {"ALIC","ITSV","ITSD","IT56","I569","I566","ITS6"}};// lay=6
- Int_t itsGeomTreeCopys[nlayers][ndeep] = {{1,1,1,1,10, 2, 4},// lay=1
- {1,1,1,1,10, 4, 4},// lay=2
- {1,1,1,1,14, 6, 1},// lay=3
- {1,1,1,1,22, 8, 1},// lay=4
- {1,1,1,1,34,22, 1},// lay=5
- {1,1,1,1,38,25, 1}};//lay=6
-
+ Char_t names[nlayers][ndeep][4];
+ Int_t itsGeomTreeCopys[nlayers][ndeep];
+ if(fMinorVersion == 1){ // Option A
+ Char_t *namesA[nlayers][ndeep] = {
+ {"ALIC","ITSV","ITSD","IT12","I12A","I10A","I103","I101","ITS1"}, // lay=1
+ {"ALIC","ITSV","ITSD","IT12","I12A","I20A","I1D3","I1D1","ITS2"}, // lay=2
+ {"ALIC","ITSV","ITSD","IT34","I004","I302","ITS3"," "," "}, // lay=3
+ {"ALIC","ITSV","ITSD","IT34","I005","I402","ITS4"," "," "}, // lay=4
+ {"ALIC","ITSV","ITSD","IT56","I565","I562","ITS5"," "," "}, // lay=5
+ {"ALIC","ITSV","ITSD","IT56","I569","I566","ITS6"," "," "}};// lay=6
+ Int_t itsGeomTreeCopysA[nlayers][ndeep]= {{1,1,1,1,10, 2, 4,1,1},// lay=1
+ {1,1,1,1,10, 4, 4,1,1},// lay=2
+ {1,1,1,1,14, 6, 1,0,0},// lay=3
+ {1,1,1,1,22, 8, 1,0,0},// lay=4
+ {1,1,1,1,34,22, 1,0,0},// lay=5
+ {1,1,1,1,38,25, 1,0,0}};//lay=6
+ for(i=0;i<nlayers;i++)for(j=0;j<ndeep;j++){
+ for(k=0;k<4;k++) names[i][j][k] = namesA[i][j][k];
+ itsGeomTreeCopys[i][j] = itsGeomTreeCopysA[i][j];
+ } // end for i,j
+ }else if(fMinorVersion == 2){ // Option B
+ Char_t *namesB[nlayers][ndeep] = {
+ {"ALIC","ITSV","ITSD","IT12","I12B","I10B","I107","I101","ITS1"}, // lay=1
+ {"ALIC","ITSV","ITSD","IT12","I12B","I20B","I1D7","I1D1","ITS2"}, // lay=2
+ {"ALIC","ITSV","ITSD","IT34","I004","I302","ITS3"," "," "}, // lay=3
+ {"ALIC","ITSV","ITSD","IT34","I005","I402","ITS4"," "," "}, // lay=4
+ {"ALIC","ITSV","ITSD","IT56","I565","I562","ITS5"," "," "}, // lay=5
+ {"ALIC","ITSV","ITSD","IT56","I569","I566","ITS6"," "," "}};// lay=6
+ Int_t itsGeomTreeCopysB[nlayers][ndeep]= {{1,1,1,1,10, 2, 4,1,1},// lay=1
+ {1,1,1,1,10, 4, 4,1,1},// lay=2
+ {1,1,1,1,14, 6, 1,0,0},// lay=3
+ {1,1,1,1,22, 8, 1,0,0},// lay=4
+ {1,1,1,1,34,22, 1,0,0},// lay=5
+ {1,1,1,1,38,25, 1,0,0}};//lay=6
+ for(i=0;i<nlayers;i++)for(j=0;j<ndeep;j++){
+ for(k=0;k<4;k++) names[i][j][k] = namesB[i][j][k];
+ itsGeomTreeCopys[i][j] = itsGeomTreeCopysB[i][j];
+ } // end for i,j
+ } // end if fMinorVersion
// Sorry, but this is not very pritty code. It should be replaced
// at some point with a version that can search through the geometry
// tree its self.
par,att,imat,imed);
fITSgeom->CreatMatrix(mod,lay,lad,det,kSPD,t,r);
if(!(fITSgeom->IsShapeDefined((Int_t)kSPD)))
- if(fMinorVersion==21){
- fITSgeom->ReSetShape(kSPD,
- new AliITSgeomSPD425Short());
- } else if(fMinorVersion==22)
fITSgeom->ReSetShape(kSPD,
- new AliITSgeomSPD425Short());
+ new AliITSgeomSPD425Short(npar,par));
} // end for det
} // end for k
} // end for j
case 3: case 4:
fITSgeom->CreatMatrix(mod,lay,lad,det,kSDD,t,r);
if(!(fITSgeom->IsShapeDefined(kSDD)))
- fITSgeom->ReSetShape(kSDD,new AliITSgeomSDD256());
+ fITSgeom->ReSetShape(kSDD,
+ new AliITSgeomSDD256(npar,par));
break;
case 5:
fITSgeom->CreatMatrix(mod,lay,lad,det,kSSD,t,r);
if(!(fITSgeom->IsShapeDefined(kSSD)))
fITSgeom->ReSetShape(kSSD,
- new AliITSgeomSSD275and75());
+ new AliITSgeomSSD275and75(npar,par));
break;
case 6:
fITSgeom->CreatMatrix(mod,lay,lad,det,kSSDp,t,r);
if(!(fITSgeom->IsShapeDefined(kSSDp)))
fITSgeom->ReSetShape(kSSDp,
- new AliITSgeomSSD75and275());
+ new AliITSgeomSSD75and275(npar,par));
break;
} // end switch
} // end for det
for(i=0;i<72;i++) cout << "*";
cout << endl;
}
+//_____________________________________________________________________________
+void AliITSvPPRasymm::SetDefaults(){
+ // sets the default segmentation, response, digit and raw cluster classes
+ const Float_t kconv = 1.0e+04; // convert cm to microns
+
+ cout << "AliITSvPPRasymm::SetDefaults" << endl;
+
+ AliITSDetType *iDetType;
+ AliITSgeomSPD *s0;
+ AliITSgeomSDD *s1;
+ AliITSgeomSSD *s2;
+ Int_t i;
+ Float_t bx[256],bz[280];
+
+ //SPD
+ iDetType=DetType(0);
+ s0 = (AliITSgeomSPD*) fITSgeom->GetShape(kSPD);// Get shape info. Do it this way for now.
+ AliITSresponse *resp0=new AliITSresponseSPD();
+ SetResponseModel(0,resp0);
+ AliITSsegmentationSPD *seg0=new AliITSsegmentationSPD(fITSgeom);
+ seg0->SetDetSize(s0->GetDx()*2.*kconv, // base this on AliITSgeomSPD
+ s0->GetDz()*2.*kconv, // for now.
+ s0->GetDy()*2.*kconv); // x,z,y full width in microns.
+ seg0->SetNPads(256,160);// Number of Bins in x and z
+ for(i=000;i<256;i++) bx[i] = 50.0; // in x all are 50 microns.
+ for(i=000;i<160;i++) bz[i] = 425.0; // most are 425 microns except below
+ for(i=160;i<280;i++) bz[i] = 0.0; // Outside of detector.
+ bz[ 31] = bz[ 32] = 625.0; // first chip boundry
+ bz[ 63] = bz[ 64] = 625.0; // first chip boundry
+ bz[ 95] = bz[ 96] = 625.0; // first chip boundry
+ bz[127] = bz[128] = 625.0; // first chip boundry
+ bz[160] = 425.0; // Set so that there is no zero pixel size for fNz.
+ seg0->SetBinSize(bx,bz); // Based on AliITSgeomSPD for now.
+ SetSegmentationModel(0,seg0);
+ // set digit and raw cluster classes to be used
+ const char *kData0=(iDetType->GetResponseModel())->DataType();
+ if (strstr(kData0,"real")) iDetType->ClassNames("AliITSdigit",
+ "AliITSRawClusterSPD");
+ else iDetType->ClassNames("AliITSdigitSPD","AliITSRawClusterSPD");
+ //iDetType->SimulationModel(new AliITSsimulationSPD(seg0,resp0));
+ //iDetType->ReconstructionModel(new AliITSClusterFinderSPD());
+
+ // SDD
+ iDetType=DetType(1);
+ s1 = (AliITSgeomSDD*) fITSgeom->GetShape(kSDD);// Get shape info. Do it this way for now.
+ AliITSresponseSDD *resp1=new AliITSresponseSDD();
+ resp1->SetDriftSpeed(7.3); // set drift speed to 7.3 microns/ns.
+ SetResponseModel(1,resp1);
+ AliITSsegmentationSDD *seg1=new AliITSsegmentationSDD(fITSgeom,resp1);
+ seg1->SetDetSize(s1->GetDx()*kconv, // base this on AliITSgeomSDD
+ s1->GetDz()*2.*kconv, // for now.
+ s1->GetDy()*2.*kconv); // x,z,y full width in microns.
+ bx[0] = (s1->GetDx()*kconv/(seg1->Dpx(0))*resp1->DriftSpeed())+1.;// clock in Mhz
+ seg1->SetNPads(256,256);// Use AliITSgeomSDD for now
+ SetSegmentationModel(1,seg1);
+ const char *kData1=(iDetType->GetResponseModel())->DataType();
+ const char *kopt=iDetType->GetResponseModel()->ZeroSuppOption();
+ if((!strstr(kopt,"2D")) && (!strstr(kopt,"1D")) || strstr(kData1,"real") ){
+ iDetType->ClassNames("AliITSdigit","AliITSRawClusterSDD");
+ } else iDetType->ClassNames("AliITSdigitSDD","AliITSRawClusterSDD");
+ //iDetType->SimulationModel(new AliITSsimulationSDD(seg1,resp1));
+ //iDetType->ReconstructionModel(new AliITSClusterFinderSDD());
+
+ // SSD Layer 5
+ iDetType=DetType(2);
+ s2 = (AliITSgeomSSD*) fITSgeom->GetShape(kSSD);// Get shape info. Do it this way for now.
+ AliITSresponse *resp2=new AliITSresponseSSD();
+ SetResponseModel(2,resp2);
+ AliITSsegmentationSSD *seg2=new AliITSsegmentationSSD(fITSgeom);
+ seg2->SetDetSize(s2->GetDx()*2.*kconv, // base this on AliITSgeomSSD
+ s2->GetDz()*2.*kconv, // for now.
+ s2->GetDy()*2.*kconv); // x,z,y full width in microns.
+ seg2->SetPadSize(95.,0.); // strip x pitch in microns
+ seg2->SetNPads(768,0); // number of strips on each side.
+ seg2->SetAngles(0.0075,0.0275); // strip angels rad P and N side.
+ seg2->SetAnglesLay5(0.0075,0.0275); // strip angels rad P and N side.
+ seg2->SetAnglesLay6(0.0275,0.0075); // strip angels rad P and N side.
+ SetSegmentationModel(2,seg2);
+ const char *kData2=(iDetType->GetResponseModel())->DataType();
+ if(strstr(kData2,"real") ) iDetType->ClassNames("AliITSdigit",
+ "AliITSRawClusterSSD");
+ else iDetType->ClassNames("AliITSdigitSSD","AliITSRawClusterSSD");
+ //iDetType->SimulationModel(new AliITSsimulationSSD(seg2,resp2));
+ //iDetType->ReconstructionModel(new AliITSClusterFinderSSD());
+
+ if(kNTYPES>3){
+ Warning("SetDefaults",
+ "Only the four basic detector types are initialised!");
+ }// end if
+ return;
+}
//______________________________________________________________________
void AliITSvPPRasymm::DrawModule(){
////////////////////////////////////////////////////////////////////////
// Only entering charged tracks
if((id = gMC->CurrentVolID(copy)) == fIdSens[0]) {
vol[0] = 1;
- id = gMC->CurrentVolOffID(0,copy);
+ id = gMC->CurrentVolOffID(2,copy);
//detector copy in the ladder = 1<->4 (ITS1 < I101 < I103 < I10A)
vol[1] = copy;
- gMC->CurrentVolOffID(1,copy1);
+ gMC->CurrentVolOffID(3,copy1);
//ladder copy in the module = 1<->2 (I10A < I12A)
- gMC->CurrentVolOffID(2,copy2);
+ gMC->CurrentVolOffID(4,copy2);
//module copy in the layer = 1<->10 (I12A < IT12)
vol[2] = copy1+(copy2-1)*2;//# of ladders in one module = 2
} else if(id == fIdSens[1]){
vol[0] = 2;
- id = gMC->CurrentVolOffID(0,copy);
+ id = gMC->CurrentVolOffID(2,copy);
//detector copy in the ladder = 1<->4 (ITS2 < I1D1 < I1D3 < I20A)
vol[1] = copy;
- gMC->CurrentVolOffID(1,copy1);
+ gMC->CurrentVolOffID(3,copy1);
//ladder copy in the module = 1<->4 (I20A < I12A)
- gMC->CurrentVolOffID(2,copy2);
+ gMC->CurrentVolOffID(4,copy2);
//module copy in the layer = 1<->10 (I12A < IT12)
vol[2] = copy1+(copy2-1)*4;//# of ladders in one module = 4
} else if(id == fIdSens[2]){
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff