-/**************************************************************************
+ /**************************************************************************
* Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
* *
* Author: The ALICE Off-line Project. *
* provided "as is" without express or implied warranty. *
**************************************************************************/
-/*
-$Log$
-Revision 1.10 2001/03/15 13:47:55 barbera
-Some service mother volumes modified
-
-Revision 1.9 2001/03/13 18:13:30 barbera
-Some mother volumes sligthly modified to eliminate an overlap with the absorber
-
-Revision 1.8 2001/03/13 08:36:24 hristov
-fabsf replaced by TMath::Abs
-
-Revision 1.7 2001/03/13 00:43:43 barbera
-Updated version of the PPR detailed geometry with symmetric services. Of course, the central part of the detector (volume ITSD and its daughters) is the same of AliITSvPPRasymm.cxx
-
-Revision 1.6 2001/02/13 16:53:35 nilsen
-Fixed a but when trying to use GEANT4. Needed to replace
-if(!((TGeant3*)gMC)) with if(!(dynamic_casst<TGeant3*>(gMC)))
-because just casting gMC to be TGeant3* even when it realy is a TGeant3 pointer
-did not result in a zero value. For AliITSv5asymm and AliITSv5symm, needed
-to fix a bug in the initilizers and a bug in BuildGeometry. This is now done
-in the same way as in AliITSv5.cxx.
-
-Revision 1.5 2001/02/09 20:06:26 nilsen
-Fixed bug in distructor. Can't distroy fixxed length arrays. Thanks Peter.
-
-Revision 1.4 2001/02/09 00:05:31 nilsen
-Added fMajor/MinorVersion variables and made other changes to better make
-use of the new code changes in AliITSgeom related classes.
-
-Revision 1.3 2001/01/30 09:23:13 hristov
-Streamers removed (R.Brun)
-
-Revision 1.2 2001/01/26 20:01:19 hristov
-Major upgrade of AliRoot code
-
-Revision 1.1.2.1 2001/01/15 13:38:32 barbera
-New ITS detailed geometry to be used for the PPR
-
-Revision 1.12 2000/12/10 16:00:44 barbera
-Added last definition of special media like end-ladder boxes and cones
-
-Revision 1.11 2000/10/30 08:02:25 barbera
-PCON's changed into simpler CONS and TUBS. Services now allow for the rails to go through them.
-
-Revision 1.3.2.7 2000/10/27 17:20:00 barbera
-Position of rails w.r.t. the interaction point corrected.
-
-Revision 1.9 2000/10/27 13:31:29 barbera
-Rails between ITS and TPC added.
-
-Revision 1.8 2000/10/27 13:03:08 barbera
-Small changes in the SPD volumes and materials
-
-Revision 1.6 2000/10/16 14:45:37 barbera
-Mother volume ITSD modified to avoid some overlaps
-
-Revision 1.5 2000/10/16 13:49:15 barbera
-Services volumes slightly modified and material added following Pierluigi Barberis' information
-
-Revision 1.4 2000/10/07 15:33:07 barbera
-Small corrections to the ITSV mother volume
-
-Revision 1.3 2000/10/07 13:06:50 barbera
-Some new materials and media defined
-
-Revision 1.2 2000/10/07 10:42:43 barbera
-Mother volume ITSV corrected
-
-Revision 1.1 2000/10/06 23:09:12 barbera
-New geometry (symmetric services
-
-Revision 1.20 2000/10/02 21:28:08 fca
-Removal of useless dependecies via forward declarations
-
-Revision 1.19 2000/07/10 16:07:19 fca
-Release version of ITS code
-
-Revision 1.14.2.2 2000/05/19 10:09:21 nilsen
-fix for bug with HP and Sun unix + fix for event display in ITS-working branch
-
-Revision 1.14.2.1 2000/03/04 23:45:19 nilsen
-Fixed up the comments/documentation.
-
-Revision 1.14 1999/11/25 06:52:56 fca
-Correct value of drca
-
-Revision 1.13.2.1 1999/11/25 06:52:21 fca
-Correct value of drca
-
-Revision 1.13 1999/10/27 11:16:26 fca
-Correction of problem in geometry
-
-Revision 1.12 1999/10/22 08:25:25 fca
-remove double definition of destructors
-
-Revision 1.11 1999/10/22 08:16:49 fca
-Correct destructors, thanks to I.Hrivnacova
-
-Revision 1.10 1999/10/06 19:56:50 fca
-Add destructor
-
-Revision 1.9 1999/10/05 08:05:09 fca
-Minor corrections for uninitialised variables.
-
-Revision 1.8 1999/09/29 09:24:20 fca
-Introduction of the Copyright and cvs Log
-
-*/
+/* $Id$ */
//////////////////////////////////////////////////////////////////////////////
// //
// //
//////////////////////////////////////////////////////////////////////////////
// See AliITSvPPRsymm::StepManager().
-#include <iostream.h>
-#include <iomanip.h>
+#include <Riostream.h>
#include <stdio.h>
#include <stdlib.h>
-#include <TMath.h>
+
+#include <TBRIK.h>
+#include <TCanvas.h>
+#include <TClonesArray.h>
+#include <TFile.h> // only required for Tracking function?
#include <TGeometry.h>
+#include <TLorentzVector.h>
+#include <TMath.h>
#include <TNode.h>
-#include <TTUBE.h>
-#include <TFile.h> // only required for Tracking function?
-#include <TCanvas.h>
#include <TObjArray.h>
-#include <TLorentzVector.h>
#include <TObjString.h>
-#include <TClonesArray.h>
-#include <TBRIK.h>
+#include <TPCON.h>
#include <TSystem.h>
+#include <TTUBE.h>
+#include <TTUBS.h>
+#include <TVirtualMC.h>
-#include "AliMC.h"
#include "AliRun.h"
#include "AliMagF.h"
#include "AliConst.h"
-#include "../TGeant3/TGeant3.h"
#include "AliITSGeant3Geometry.h"
-#include "AliITShit.h"
-#include "AliITS.h"
-#include "AliITSvPPRsymm.h"
#include "AliITSgeom.h"
-#include "AliITSgeomSPD.h"
#include "AliITSgeomSDD.h"
+#include "AliITSgeomSPD.h"
#include "AliITSgeomSSD.h"
-
+#include "AliITShit.h"
+#include "AliITSresponseSDD.h"
+#include "AliITSresponseSPD.h"
+#include "AliITSresponseSSD.h"
+#include "AliITSsegmentationSDD.h"
+#include "AliITSsegmentationSPD.h"
+#include "AliITSsegmentationSSD.h"
+#include "AliITSsimulationSDD.h"
+#include "AliITSsimulationSPD.h"
+#include "AliITSsimulationSSD.h"
+#include "AliITSvPPRsymm.h"
+#include "AliMagF.h"
+#include "AliRun.h"
ClassImp(AliITSvPPRsymm)
//_____________________________________________________________________________
-AliITSvPPRsymm::AliITSvPPRsymm() {
+AliITSvPPRsymm::AliITSvPPRsymm() : AliITSvPPRasymm() {
////////////////////////////////////////////////////////////////////////
// Standard default constructor for the ITS version 9.
////////////////////////////////////////////////////////////////////////
- Int_t i;
-
- fIdN = 0;
- fIdName = 0;
- fIdSens = 0;
- fEuclidOut = kFALSE; // Don't write Euclide file
- fGeomDetOut = kFALSE; // Don't write .det file
- fGeomDetIn = kFALSE; // Don't Read .det file
- fMajorVersion = IsVersion();
- fMinorVersion = -1;
- for(i=0;i<60;i++) fRead[i] = '\0';
- for(i=0;i<60;i++) fWrite[i] = '\0';
- for(i=0;i<60;i++) fEuclidGeomDet[i] = '\0';
}
//_____________________________________________________________________________
-AliITSvPPRsymm::AliITSvPPRsymm(const char *name, const char *title) : AliITS(name, title){
+AliITSvPPRsymm::AliITSvPPRsymm(const char *name, const char *title) : AliITSvPPRasymm(name, title){
////////////////////////////////////////////////////////////////////////
// Standard constructor for the ITS version 9.
////////////////////////////////////////////////////////////////////////
- Int_t i;
-
- fIdN = 6;
- fIdName = new TString[fIdN];
- fIdName[0] = "ITS1";
- fIdName[1] = "ITS2";
- fIdName[2] = "ITS3";
- fIdName[3] = "ITS4";
- fIdName[4] = "ITS5";
- fIdName[5] = "ITS6";
- fIdSens = new Int_t[fIdN];
- for (i=0;i<fIdN;i++) fIdSens[i] = 0;
- fMajorVersion = IsVersion();
- fMinorVersion = 2;
- fEuclidOut = kFALSE; // Don't write Euclide file
- fGeomDetOut = kFALSE; // Don't write .det file
- fGeomDetIn = kFALSE; // Don't Read .det file
- SetThicknessDet1();
- SetThicknessDet2();
- SetThicknessChip1();
- SetThicknessChip2();
-
- fEuclidGeometry="$ALICE_ROOT/ITS/ITSgeometry_vPPRsymm2.euc";
- strncpy(fEuclidGeomDet,"$ALICE_ROOT/ITS/ITSgeometry_vPPRsymm2.det",60);
- strncpy(fRead,fEuclidGeomDet,60);
- strncpy(fWrite,fEuclidGeomDet,60);
-
-}
-//____________________________________________________________________________
-AliITSvPPRsymm::AliITSvPPRsymm(const AliITSvPPRsymm &source){
-////////////////////////////////////////////////////////////////////////
-// Copy Constructor for ITS version 9.
-////////////////////////////////////////////////////////////////////////
- if(&source == this) return;
- Warning("Copy Constructor","Not allowed to copy AliITSvPPRsymm");
- return;
-}
-//_____________________________________________________________________________
-AliITSvPPRsymm& AliITSvPPRsymm::operator=(const AliITSvPPRsymm &source){
-////////////////////////////////////////////////////////////////////////
-// Assignment operator for the ITS version 9.
-////////////////////////////////////////////////////////////////////////
- if(&source == this) return *this;
- Warning("= operator","Not allowed to copy AliITSvPPRsymm");
- return *this;
}
//_____________________________________________________________________________
AliITSvPPRsymm::~AliITSvPPRsymm() {
// Standard destructor for the ITS version 9.
////////////////////////////////////////////////////////////////////////
}
-//__________________________________________________________________________
-void AliITSvPPRsymm::BuildGeometry(){
-////////////////////////////////////////////////////////////////////////
-// Geometry builder for the ITS version 9.
-////////////////////////////////////////////////////////////////////////
- TNode *node, *top;
- const int kColorITS=kYellow;
- //
- top = gAlice->GetGeometry()->GetNode("alice");
-
- new TTUBE("S_layer1","Layer1 of ITS","void",3.95,3.95+0.05475,12.25);
- top->cd();
- node = new TNode("Layer1","Layer1","S_layer1",0,0,0,"");
- node->SetLineColor(kColorITS);
- fNodes->Add(node);
-
- new TTUBE("S_layer2","Layer2 of ITS","void",7.,7.+0.05475,16.3);
- top->cd();
- node = new TNode("Layer2","Layer2","S_layer2",0,0,0,"");
- node->SetLineColor(kColorITS);
- fNodes->Add(node);
-
- new TTUBE("S_layer3","Layer3 of ITS","void",15.,15.+0.05288,21.1);
- top->cd();
- node = new TNode("Layer3","Layer3","S_layer3",0,0,0,"");
- node->SetLineColor(kColorITS);
- fNodes->Add(node);
-
- new TTUBE("S_layer4","Layer4 of ITS","void",24,24+0.05288,29.6);
- top->cd();
- node = new TNode("Layer4","Layer4","S_layer4",0,0,0,"");
- node->SetLineColor(kColorITS);
- fNodes->Add(node);
-
- new TTUBE("S_layer5","Layer5 of ITS","void",40,40+0.05382,45.1);
- top->cd();
- node = new TNode("Layer5","Layer5","S_layer5",0,0,0,"");
- node->SetLineColor(kColorITS);
- fNodes->Add(node);
-
- new TTUBE("S_layer6","Layer6 of ITS","void",45,45+0.05382,50.4);
- top->cd();
- node = new TNode("Layer6","Layer6","S_layer6",0,0,0,"");
- node->SetLineColor(kColorITS);
- fNodes->Add(node);
-}
//_____________________________________________________________________________
void AliITSvPPRsymm::CreateGeometry(){
////////////////////////////////////////////////////////////////////////
////////////////////////////////////////////////////////////////////////
//INNER RADII OF THE SILICON LAYERS
- // Float_t rl[6] = { 3.8095,7.,15.,24.,38.1,43.5765 };
+ // Float_t rl[6] = { 3.8095,7.,15.,24.,38.1,43.5765 };
//THICKNESSES OF LAYERS (in % radiation length)
Float_t drl[6] = { 1.03,1.03,0.94,0.95,0.91,0.87 };
//HALF LENGTHS OF LAYERS
- /*
- Float_t dzl[6] = { 14.35,14.35,25.1,32.1,49.405,55.27 };
+ // Float_t dzl[6] = { 14.35,14.35,25.1,32.1,49.405,55.27 };
//LENGTHS OF END-LADDER BOXES (ALL INCLUDED)
- Float_t dzb[6] = { 12.4,12.4,13.5,15.,7.5,7.5 };
+ // Float_t dzb[6] = { 12.4,12.4,13.5,15.,7.5,7.5 };
//THICKNESSES OF END-LADDER BOXES (ALL INCLUDED)
- Float_t drb[6] = { rl[1]-rl[0],0.2,5.,5.,4.,4. };
- */
-
+ // Float_t drb[6] = { rl[1]-rl[0],0.2,5.,5.,4.,4. };
- Float_t dits[50], rlim, zmax;
+ Float_t dits[100], rlim, zmax;
// Float_t zpos;
// Float_t pcits[50]
- Float_t xltpc;
+ Float_t ztpc;
Int_t idrotm[1999], i;
- Float_t dgh[50];
+ Float_t dgh[100];
// Define some variables for SPD
Float_t di1d3[3], di20a[3], di1d2[3]; // for layer 2
Float_t di108[3], di104[3]; // for both layers
- Float_t ddet1=300.; // total detector thickness on layer 1 (micron)
- Float_t dchip1=300.; // total chip thickness on layer 1 (micron)
+ Float_t ddet1=200.; // total detector thickness on layer 1 (micron)
+ Float_t dchip1=200.; // total chip thickness on layer 1 (micron)
- Float_t ddet2=300.; // total detector thickness on layer 2 (micron)
- Float_t dchip2=300.; // total chip thickness on layer 2 (micron)
+ Float_t ddet2=200.; // total detector thickness on layer 2 (micron)
+ Float_t dchip2=200.; // total chip thickness on layer 2 (micron)
- Float_t dbus=200.; // total bus thickness on both layers (micron)
+ Float_t dbus=300.; // total bus thickness on both layers (micron)
ddet1 = GetThicknessDet1();
ddet2 = GetThicknessDet2();
dchip1 = GetThicknessChip1();
dchip2 = GetThicknessChip2();
-
if(ddet1 < 100. || ddet1 > 300.) {
- cout << "The detector thickness for layer 1 is outside [100,300] microns."
- " The default value of 300 microns will be used." << endl;
- ddet1=300.;
+ cout << "ITS - WARNING: the detector thickness for layer 1 is outside the range of [100,300] microns."
+ " The default value of 200 microns will be used." << endl;
+ ddet1=200.;
}
if(ddet2 < 100. || ddet2 > 300.) {
- cout << "The detector thickness for layer 2 is outside [100,300] microns."
- " The default value of 300 microns will be used." << endl;
- ddet2=300.;
+ cout << "ITS - WARNING: the detector thickness for layer 2 is outside the range of [100,300] microns."
+ " The default value of 200 microns will be used." << endl;
+ ddet2=200.;
}
- if(dchip1 < 150. || dchip1 > 300.) {
- cout << "The chip thickness for layer 1 is outside [150,300] microns."
- " The default value of 300 microns will be used." << endl;
- dchip1=300.;
+ if(dchip1 < 100. || dchip1 > 300.) {
+ cout << "ITS - WARNING: the chip thickness for layer 1 is outside the range of [100,300] microns."
+ " The default value of 200 microns will be used." << endl;
+ dchip1=200.;
}
- if(dchip2 < 150. || dchip2 > 300.) {
- cout << "The chip thickness for layer 2 is outside [150,300] microns."
- " The default value of 300 microns will be used." << endl;
- dchip2=300.;
+ if(dchip2 < 100. || dchip2 > 300.) {
+ cout << "ITS - WARNING: the chip thickness for layer 2 is outside the range of [100,300] microns."
+ " The default value of 200 microns will be used." << endl;
+ dchip2=200.;
}
+
+ Int_t rails = 1; // flag for rails (1 --> rails in; 0 --> rails out)
+
+ Int_t fluid = 1; // flag for the cooling fluid (1 --> water; 0 --> freon)
+
+ rails = GetRails();
+
+ fluid = GetCoolingFluid();
+
+ if(rails != 0 && rails != 1) {
+ cout << "ITS - WARNING: the switch for rails is not set neither to 0 (rails out) nor to 1 (rails in)."
+ " The default value of 1 (rails in) will be used." << endl;
+
+ }
+ if(fluid != 0 && fluid != 1) {
+ cout << "ITS - WARNING: the switch for cooling fluid is not set neither to 0 (freon) nor to 1 (water)."
+ " The default value of 1 (water) will be used." << endl;
+ }
+
+ cout << "ITS: Detector thickness on layer 1 is set to " << ddet1 << " microns." << endl;
+ cout << "ITS: Chip thickness on layer 1 is set to " << dchip1 << " microns." << endl;
+ cout << "ITS: Detector thickness on layer 2 is set to " << ddet2 << " microns." << endl;
+ cout << "ITS: Chip thickness on layer 2 is set to " << dchip2 << " microns." << endl;
+ if(rails == 0 ) {
+ cout << "ITS: Rails are out." << endl;
+ } else {
+ cout << "ITS: Rails are in." << endl;
+ }
+ if(fluid == 0 ) {
+ cout << "ITS: The cooling fluid is freon." << endl;
+ } else {
+ cout << "ITS: The cooling fluid is water." << endl;
+ }
+
ddet1 = ddet1*0.0001/2.; // conversion from tot length in um to half in cm
ddet2 = ddet2*0.0001/2.; // conversion from tot length in um to half in cm
dchip1 = dchip1*0.0001/2.;// conversion from tot length in um to half in cm
dchip2 = dchip2*0.0001/2.;// conversion from tot length in um to half in cm
- dbus = dbus*0.0001/2.; // conversion from tot length in um to half in cm
+ dbus = dbus*0.0001/2.; // conversion from tot length in um to half in cm
Float_t deltax, deltay;
- Int_t thickness = fMinorVersion/10;
- Int_t option = fMinorVersion - 10*thickness;
+ Int_t thickness = GetMinorVersion()/10;
+ Int_t option = GetMinorVersion() - 10*thickness;
// Define some variables for SDD
AliMatrix(idrotm[234],90.0,71.9991,90.0,161.9991,0.0,0.0);
AliMatrix(idrotm[235],90.0,270.0,90.0,0.0,0.0,0.0);
AliMatrix(idrotm[236],90.0,180.013702,90.0,270.013702,0.0,0.0);
- AliMatrix(idrotm[237],90.0,0.0,90.0,90.0,180.0,0.0);
+ AliMatrix(idrotm[237],90.0,180.0,90.0,90.0,0.0,0.0);
AliMatrix(idrotm[238],90.0,144.0,90.0,234.0,0.0,0.0);
AliMatrix(idrotm[239],90.0,216.0,90.0,306.0,0.0,0.0);
AliMatrix(idrotm[240],90.0,288.0,90.0,18.0,0.0,0.0);
AliMatrix(idrotm[241],90.0,324.0,90.0,54.0,0.0,0.0);
AliMatrix(idrotm[242],90.0,36.0,90.0,126.0,0.0,0.0);
AliMatrix(idrotm[243],90.0,108.0,90.0,198.0,0.0,0.0);
- AliMatrix(idrotm[244],90.0,0.0,90.0,270.0,180.0,0.0);
- AliMatrix(idrotm[245],90.0,342.0,90.0,252.0,180.0,0.0);
- AliMatrix(idrotm[246],90.0,130.0,90.0,40.0,180.0,0.0);
- AliMatrix(idrotm[247],90.0,139.0,90.0,49.0,180.0,0.0);
- AliMatrix(idrotm[248],90.0,148.0,90.0,58.0,180.0,0.0);
- AliMatrix(idrotm[249],90.0,157.0,90.0,67.0,180.0,0.0);
+ AliMatrix(idrotm[244],90.0,180.0,90.0,270.0,0.0,0.0);
+ AliMatrix(idrotm[245],90.0,162.0,90.0,252.0,0.0,0.0);
+ AliMatrix(idrotm[246],90.0,310.0,90.0,40.0,0.0,0.0);
+ AliMatrix(idrotm[247],90.0,319.0,90.0,49.0,0.0,0.0);
+ AliMatrix(idrotm[248],90.0,328.0,90.0,58.0,0.0,0.0);
+ AliMatrix(idrotm[249],90.0,337.0,90.0,67.0,0.0,0.0);
AliMatrix(idrotm[1003],90.0,73.5,90.0,163.5,0.0,0.0);
AliMatrix(idrotm[1011],90.0,342.0,90.0,72.0,0.0,0.0);
AliMatrix(idrotm[1039],90.0,72.0,90.0,162.0,0.0,0.0);
if (option == 2) {
- AliMatrix(idrotm[201],90.0,0.0,90.0,90.0,180.0,0.0);
+ AliMatrix(idrotm[201],90.0,0.0,90.0,90.0,0.0,0.0);
AliMatrix(idrotm[202],90.0,90.0,90.0,0.0,0.0,0.0);
AliMatrix(idrotm[203],90.0,350.0,90.0,260.0,0.0,0.0);
AliMatrix(idrotm[204],90.0,170.0,90.0,80.0,0.0,0.0);
AliMatrix(idrotm[235],90.0,270.0,90.0,0.0,0.0,0.0);
AliMatrix(idrotm[236],90.0,180.013702,90.0,270.013702,0.0,0.0);
AliMatrix(idrotm[237],90.0,90.0,90.0,180.0,0.0,0.0);
- AliMatrix(idrotm[238],90.0,0.0,90.0,270.0,180.0,0.0);
- AliMatrix(idrotm[239],90.0,342.0,90.0,252.0,180.0,0.0);
- AliMatrix(idrotm[240],90.0,130.0,90.0,40.0,180.0,0.0);
- AliMatrix(idrotm[241],90.0,139.0,90.0,49.0,180.0,0.0);
- AliMatrix(idrotm[242],90.0,148.0,90.0,58.0,180.0,0.0);
- AliMatrix(idrotm[243],90.0,157.0,90.0,67.0,180.0,0.0);
+ AliMatrix(idrotm[238],90.0,180.0,90.0,270.0,0.0,0.0);
+ AliMatrix(idrotm[239],90.0,162.0,90.0,252.0,0.0,0.0);
+ AliMatrix(idrotm[240],90.0,310.0,90.0,40.0,0.0,0.0);
+ AliMatrix(idrotm[241],90.0,319.0,90.0,49.0,0.0,0.0);
+ AliMatrix(idrotm[242],90.0,328.0,90.0,58.0,0.0,0.0);
+ AliMatrix(idrotm[243],90.0,337.0,90.0,67.0,0.0,0.0);
AliMatrix(idrotm[244],90.0,216.0,90.0,306.0,0.0,0.0);
AliMatrix(idrotm[245],90.0,36.0,90.0,126.0,0.0,0.0);
AliMatrix(idrotm[246],90.0,108.0,90.0,198.0,0.0,0.0);
// FIELD CAGE HALF LENGTH
- rlim = 56.;
- zmax = 76.708;
- xltpc = 284.;
+ rlim = 50.;
+ zmax = 74.;
+ ztpc = 284.;
// --- Define ghost volume containing the whole ITS (including services)
// and fill it with air
-/*
dgh[0] = 0.;
dgh[1] = 360.;
dgh[2] = 16.;
- dgh[3] = -xltpc-5.-0.1;
- dgh[4] = 46;
+ dgh[3] = -ztpc-5.-0.1;
+ dgh[4] = 62.4;
dgh[5] = 85.;
- dgh[6] = -xltpc;
- dgh[7] = 46;
+ dgh[6] = -ztpc;
+ dgh[7] = 62;
dgh[8] = 85.;
- dgh[9] = -xltpc;
- dgh[10] = 46;
- dgh[11] = 56.1;
- dgh[12] = -100.7;
- dgh[13] = 46;
- dgh[14] = 56.1;
- dgh[15] = -77.2;
- dgh[16] = 46;
- dgh[17] = 56.1;
- dgh[18] = -42;
+ dgh[9] = -ztpc;
+ dgh[10] = 62;
+ dgh[11] = 62+4.;
+ dgh[12] = -97.5;
+ dgh[13] = 46;
+ dgh[14] = rlim+6;
+ dgh[15] = -zmax;
+ dgh[16] = 46;
+ dgh[17] = rlim+6;
+ dgh[18] = -48;
dgh[19] = 6;
- dgh[20] = 56.1;
- dgh[21] = -28;
+ dgh[20] = rlim+6;
+ dgh[21] = -28.6;
dgh[22] = 6;
- dgh[23] = 56.1;
- dgh[24] = -26.2;
+ dgh[23] = rlim+6;
+ dgh[24] = -27.6;
dgh[25] = 3.295;
- dgh[26] = 56.1;
- dgh[27] = 26.2;
+ dgh[26] = rlim+6;
+ dgh[27] = 27.6;
dgh[28] = 3.295;
- dgh[29] = 56.1;
- dgh[30] = 28;
+ dgh[29] = rlim+6;
+ dgh[30] = 28.6;
dgh[31] = 6;
- dgh[32] = 56.1;
- dgh[33] = 42;
+ dgh[32] = rlim+6;
+ dgh[33] = 48;
dgh[34] = 6;
- dgh[35] = 56.1;
- dgh[36] = 77.2;
+ dgh[35] = rlim+6;
+ dgh[36] = zmax;
dgh[37] = 46;
- dgh[38] = 56.1;
- dgh[39] = 100.7;
- dgh[40] = 46;
- dgh[41] = 56.1;
- dgh[42] = xltpc;
- dgh[43] = 62;
- dgh[44] = 62+4.;
- dgh[45] = xltpc;
- dgh[46] = 62;
+ dgh[38] = rlim+6;
+ dgh[39] = 97.5;
+ dgh[40] = 46;
+ dgh[41] = rlim+6;
+ dgh[42] = ztpc;
+ dgh[43] = 62;
+ dgh[44] = 62+4.;
+ dgh[45] = ztpc;
+ dgh[46] = 62;
dgh[47] = 85.;
- dgh[48] = xltpc+4.+0.1;
+ dgh[48] = ztpc+4.+0.1;
dgh[49] = 62.4;
dgh[50] = 85.;
gMC->Gsvolu("ITSV", "PCON", idtmed[205], dgh, 51);
-*/
- dgh[0] = 0.;
- dgh[1] = 360.;
- dgh[2] = 12.;
- dgh[3] = -xltpc-5.-0.1;
- dgh[4] = 46;
- dgh[5] = 85.;
- dgh[6] = -xltpc;
- dgh[7] = 46;
- dgh[8] = 85.;
- dgh[9] = -xltpc;
- dgh[10] = 46;
- dgh[11] = 56.1;
- dgh[12] = -100.7;
- dgh[13] = 46;
- dgh[14] = 56.1;
- dgh[15] = -77.2;
- dgh[16] = 46;
- dgh[17] = 56.1;
- dgh[18] = -40.;
- dgh[19] = 3.295;
- dgh[20] = 56.1;
- dgh[21] = 40.;
- dgh[22] = 3.295;
- dgh[23] = 56.1;
- dgh[24] = 77.2;
- dgh[25] = 46;
- dgh[26] = 56.1;
- dgh[27] = 100.7;
- dgh[28] = 46;
- dgh[29] = 56.1;
- dgh[30] = xltpc;
- dgh[31] = 62;
- dgh[32] = 62+4.;
- dgh[33] = xltpc;
- dgh[34] = 62;
- dgh[35] = 85.;
- dgh[36] = xltpc+4.+0.1;
- dgh[37] = 62.4;
- dgh[38] = 85.;
- gMC->Gsvolu("ITSV", "PCON", idtmed[205], dgh, 39);
// --- Place the ghost volume in its mother volume (ALIC) and make it
dgh[0] = 0.;
dgh[1] = 360.;
dgh[2] = 8.;
- dgh[3] = -77.2;
+ dgh[3] = -zmax;
dgh[4] = 46.;
- dgh[5] = 56.;
- dgh[6] = -42;
+ dgh[5] = rlim;
+ dgh[6] = -47.5;
dgh[7] = 6.005;
- dgh[8] = 56.;
- dgh[9] = -28;
+ dgh[8] = rlim;
+ dgh[9] = -28.5;
dgh[10] = 6.005;
- dgh[11] = 56.;
- dgh[12] = -26.2;
+ dgh[11] = rlim;
+ dgh[12] = -27.5;
dgh[13] = 3.3;
- dgh[14] = 56.;
- dgh[15] = 26.2;
+ dgh[14] = rlim;
+ dgh[15] = 27.5;
dgh[16] = 3.3;
- dgh[17] = 56.;
- dgh[18] = 28;
+ dgh[17] = rlim;
+ dgh[18] = 28.5;
dgh[19] = 6.005;
- dgh[20] = 56.;
- dgh[21] = 42;
+ dgh[20] = rlim;
+ dgh[21] = 47.5;
dgh[22] = 6.005;
- dgh[23] = 56.;
- dgh[24] = 77.2;
+ dgh[23] = rlim;
+ dgh[24] = zmax;
dgh[25] = 46.;
- dgh[26] = 56.;
+ dgh[26] = rlim;
gMC->Gsvolu("ITSD", "PCON", idtmed[205], dgh, 27);
-
// --- Place the ghost volume in its mother volume (ITSV) and make it
// invisible
gMC->Gspos("ITSD", 1, "ITSV", 0., 0., 0., 0, "ONLY");
//gMC->Gsatt("ITSD", "SEEN", 0);
-
// --- Define SPD (option 'a') volumes ----------------------------
// SPD - option 'a'
gMC->Gsvolu("I103", "BOX ", idtmed[254], di103, 3); // contains det and chip
// layer 1
dits[0] = 0.793;
- dits[1] = 0.015;
+ dits[1] = 0.475; //0.685; 0.015
dits[2] = 2.5;
- gMC->Gsvolu("I105", "BOX ", idtmed[201], dits, 3);
+ gMC->Gsvolu("I105", "BOX ", idtmed[290], dits, 3);
di104[0] = 0.843;
di104[1] = dbus;
dits[4] = 180;
gMC->Gsvolu("I114", "TUBS", idtmed[264], dits, 5);
- dits[0] = 0;
- dits[1] = 0.025;
- dits[2] = 24;
- dits[3] = 0;
- dits[4] = 180;
- gMC->Gsvolu("I115", "TUBS", idtmed[211], dits, 5);
-
+ if (fluid == 1) {
+ dits[0] = 0;
+ dits[1] = 0.025;
+ dits[2] = 24;
+ dits[3] = 0;
+ dits[4] = 180;
+ gMC->Gsvolu("I115", "TUBS", idtmed[211], dits, 5); // set water as cooling fluid
+ } else {
+ dits[0] = 0;
+ dits[1] = 0.025;
+ dits[2] = 24;
+ dits[3] = 0;
+ dits[4] = 180;
+ gMC->Gsvolu("I115", "TUBS", idtmed[212], dits, 5); // set freon as cooling fluid
+ }
+
dits[0] = 0.063;
dits[1] = 0.035;
dits[2] = 24;
di1d1[2] = 3.536;
gMC->Gsvolu("I1D1", "BOX ", idtmed[250], di1d1, 3); // contains detector
// layer 2
- dits[0] = 0.063;
- dits[1] = 0.025;
- dits[2] = 24;
- gMC->Gsvolu("I117", "BOX ", idtmed[211], dits, 3);
+ if (fluid == 1) {
+ dits[0] = 0.063;
+ dits[1] = 0.025;
+ dits[2] = 24;
+ gMC->Gsvolu("I117", "BOX ", idtmed[211], dits, 3); // set water as cooling fuid
+ } else {
+ dits[0] = 0.063;
+ dits[1] = 0.025;
+ dits[2] = 24;
+ gMC->Gsvolu("I117", "BOX ", idtmed[212], dits, 3); // set freon as cooling fluid
+ }
dits1[0] = 0.64;
dits1[1] = ddet1;
dits[2] = 0.55;
gMC->Gsvolu("I678", "TUBE", idtmed[263], dits, 3); // was I178 in old geom.
- dits[0] = 0;
- dits[1] = 0.3;
- dits[2] = 1.5;
- gMC->Gsvolu("I677", "TUBE", idtmed[211], dits, 3); // was I177 in old geom.
-
+ if (fluid == 1) {
+ dits[0] = 0;
+ dits[1] = 0.3;
+ dits[2] = 1.5;
+ gMC->Gsvolu("I677", "TUBE", idtmed[211], dits, 3); // set water as cooling fluid
+ // was I177 in old geom.
+ } else {
+ dits[0] = 0;
+ dits[1] = 0.3;
+ dits[2] = 1.5;
+ gMC->Gsvolu("I677", "TUBE", idtmed[212], dits, 3); // set freon as cooling fluid
+ // was I177 in old geom.
+ }
+
dits[0] = 0.07;
dits[1] = 0.125;
dits[2] = 0.3;
gMC->Gsvolu("I675", "TUBE", idtmed[263], dits, 3); // was I175 in old geom.
- dits[0] = 0;
- dits[1] = 0.1;
- dits[2] = 0.8;
- gMC->Gsvolu("I674", "TUBE", idtmed[211], dits, 3); // was I174 in old geom.
-
- dits[0] = 0;
- dits[1] = 0.1;
- dits[2] = 3;
- gMC->Gsvolu("I672", "TUBE", idtmed[211], dits, 3); // was I172 in old geom.
-
- dits[0] = 0;
- dits[1] = 0.0746;
- dits[2] = 0.8;
- gMC->Gsvolu("I670", "TUBE", idtmed[211], dits, 3); // was I170 in old geom.
+ if (fluid == 1) {
+ dits[0] = 0;
+ dits[1] = 0.1;
+ dits[2] = 0.8;
+ gMC->Gsvolu("I674", "TUBE", idtmed[211], dits, 3); // set water as cooling fluid
+ // was I174 in old geom.
+ } else {
+ dits[0] = 0;
+ dits[1] = 0.1;
+ dits[2] = 0.8;
+ gMC->Gsvolu("I674", "TUBE", idtmed[212], dits, 3); // set freon as cooling fluid
+ // was I174 in old geom.
+ }
+
+ if (fluid == 1) {
+ dits[0] = 0;
+ dits[1] = 0.1;
+ dits[2] = 3;
+ gMC->Gsvolu("I672", "TUBE", idtmed[211], dits, 3); // set water as cooling fluid
+ // was I172 in old geom.
+ } else {
+ dits[0] = 0;
+ dits[1] = 0.1;
+ dits[2] = 3;
+ gMC->Gsvolu("I672", "TUBE", idtmed[212], dits, 3); // set freon as cooling fluid
+ // was I172 in old geom.
+ }
+
+ if (fluid == 1) {
+ dits[0] = 0;
+ dits[1] = 0.0746;
+ dits[2] = 0.8;
+ gMC->Gsvolu("I670", "TUBE", idtmed[211], dits, 3); // set water as cooling fluid
+ // was I170 in old geom.
+ } else {
+ dits[0] = 0;
+ dits[1] = 0.0746;
+ dits[2] = 0.8;
+ gMC->Gsvolu("I670", "TUBE", idtmed[212], dits, 3); // set freon as cooling fluid
+ // was I170 in old geom.
+ }
+
+ if (fluid == 1) {
+ dits[0] = 3.7;
+ dits[1] = 5.4;
+ dits[2] = 0.35;
+ dits[3] = 2;
+ dits[4] = 36;
+ gMC->Gsvolu("I668", "TUBS", idtmed[211], dits, 5); // set water as cooling fluid
+ // was I168 in old geom.
+ } else {
+ dits[0] = 3.7;
+ dits[1] = 5.4;
+ dits[2] = 0.35;
+ dits[3] = 2;
+ dits[4] = 36;
+ gMC->Gsvolu("I668", "TUBS", idtmed[212], dits, 5); // set freon as cooling fluid
+ // was I168 in old geom.
+ }
- dits[0] = 3.7;
- dits[1] = 5.4;
- dits[2] = 0.35;
- dits[3] = 2;
- dits[4] = 36;
- gMC->Gsvolu("I668", "TUBS", idtmed[211], dits, 5); // was I168 in old geom.
}
gMC->Gsvolu("I124", "TUBS", idtmed[253], dits, 5);
dits[0] = 0.793;
- dits[1] = 0.015 ;
+ dits[1] = 0.475; //0.685; 0.015
dits[2] = 2.5;
- gMC->Gsvolu("I105", "BOX ", idtmed[201], dits, 3);
+ gMC->Gsvolu("I105", "BOX ", idtmed[290], dits, 3);
di107[0] = 0.793;
di107[1] = ddet1+dchip1;
dits[4] = 180;
gMC->Gsvolu("I114", "TUBS", idtmed[264], dits, 5);
- dits[0] = 0;
- dits[1] = 0.025;
- dits[2] = 24;
- dits[3] = 0;
- dits[4] = 180;
- gMC->Gsvolu("I115", "TUBS", idtmed[211], dits, 5);
-
+ if (fluid == 1) {
+ dits[0] = 0;
+ dits[1] = 0.025;
+ dits[2] = 24;
+ dits[3] = 0;
+ dits[4] = 180;
+ gMC->Gsvolu("I115", "TUBS", idtmed[211], dits, 5); // set water as cooling fluid
+ } else {
+ dits[0] = 0;
+ dits[1] = 0.025;
+ dits[2] = 24;
+ dits[3] = 0;
+ dits[4] = 180;
+ gMC->Gsvolu("I115", "TUBS", idtmed[212], dits, 5); // set freon as cooling fluid
+ }
+
dits[0] = 0.063;
dits[1] = 0.035;
dits[2] = 24;
di1d1[2] = 3.536;
gMC->Gsvolu("I1D1", "BOX ", idtmed[250], di1d1, 3); // contains detector
// layer 2
- dits[0] = 0.063;
- dits[1] = 0.025;
- dits[2] = 24;
- gMC->Gsvolu("I117", "BOX ", idtmed[211], dits, 3);
+
+ if (fluid == 1) {
+ dits[0] = 0.063;
+ dits[1] = 0.025;
+ dits[2] = 24;
+ gMC->Gsvolu("I117", "BOX ", idtmed[211], dits, 3); // set water as cooling fluid
+ } else {
+ dits[0] = 0.063;
+ dits[1] = 0.025;
+ dits[2] = 24;
+ gMC->Gsvolu("I117", "BOX ", idtmed[212], dits, 3); // set freon as cooling fluid
+ }
dits1[0] = 0.64;
dits1[1] = ddet1;
dits[2] = 0.55;
gMC->Gsvolu("I678", "TUBE", idtmed[263], dits, 3); // was I178 in old geom.
- dits[0] = 0;
- dits[1] = 0.3;
- dits[2] = 1.5;
- gMC->Gsvolu("I677", "TUBE", idtmed[211], dits, 3); // was I177 in old geom.
+ if (fluid == 1) {
+ dits[0] = 0;
+ dits[1] = 0.3;
+ dits[2] = 1.5;
+ gMC->Gsvolu("I677", "TUBE", idtmed[211], dits, 3); //set water as cooling fluid
+ // was I177 in old geom.
+ } else {
+ dits[0] = 0;
+ dits[1] = 0.3;
+ dits[2] = 1.5;
+ gMC->Gsvolu("I677", "TUBE", idtmed[212], dits, 3); //set freon as cooling fluid
+ // was I177 in old geom.
+ }
dits[0] = 0.07;
dits[1] = 0.125;
dits[2] = 0.3;
gMC->Gsvolu("I675", "TUBE", idtmed[263], dits, 3); // was I175 in old geom.
- dits[0] = 0;
- dits[1] = 0.1;
- dits[2] = 0.8;
- gMC->Gsvolu("I674", "TUBE", idtmed[211], dits, 3); // was I174 in old geom.
-
- dits[0] = 0;
- dits[1] = 0.1;
- dits[2] = 3;
- gMC->Gsvolu("I672", "TUBE", idtmed[211], dits, 3); // was I172 in old geom.
-
- dits[0] = 0;
- dits[1] = 0.0746;
- dits[2] = 0.8;
- gMC->Gsvolu("I670", "TUBE", idtmed[211], dits, 3); // was I170 in old geom.
-
- dits[0] = 3.7;
- dits[1] = 5.4;
- dits[2] = 0.35;
- dits[3] = 2;
- dits[4] = 36;
- gMC->Gsvolu("I668", "TUBS", idtmed[211], dits, 5); // was I168 in old geom.
+ if (fluid == 1) {
+ dits[0] = 0;
+ dits[1] = 0.1;
+ dits[2] = 0.8;
+ gMC->Gsvolu("I674", "TUBE", idtmed[211], dits, 3); //set water as cooling fluid
+ // was I174 in old geom.
+ } else {
+ dits[0] = 0;
+ dits[1] = 0.1;
+ dits[2] = 0.8;
+ gMC->Gsvolu("I674", "TUBE", idtmed[212], dits, 3); //set freon as cooling fluid
+ // was I174 in old geom.
+ }
+
+ if (fluid == 1) {
+ dits[0] = 0;
+ dits[1] = 0.1;
+ dits[2] = 3;
+ gMC->Gsvolu("I672", "TUBE", idtmed[211], dits, 3); //set water as cooling fluid
+ // was I172 in old geom.
+ } else {
+ dits[0] = 0;
+ dits[1] = 0.1;
+ dits[2] = 3;
+ gMC->Gsvolu("I672", "TUBE", idtmed[212], dits, 3); //set freon as cooling fluid
+ // was I172 in old geom.
+ }
+
+ if (fluid == 1) {
+ dits[0] = 0;
+ dits[1] = 0.0746;
+ dits[2] = 0.8;
+ gMC->Gsvolu("I670", "TUBE", idtmed[211], dits, 3); //set water as cooling fluid
+ // was I170 in old geom.
+ } else {
+ dits[0] = 0;
+ dits[1] = 0.0746;
+ dits[2] = 0.8;
+ gMC->Gsvolu("I670", "TUBE", idtmed[212], dits, 3); //set freon as cooling fluid
+ // was I170 in old geom.
+ }
+
+ if (fluid == 1) {
+ dits[0] = 3.7;
+ dits[1] = 5.4;
+ dits[2] = 0.35;
+ dits[3] = 2;
+ dits[4] = 36;
+ gMC->Gsvolu("I668", "TUBS", idtmed[211], dits, 5); //set water as cooling fluid
+ // was I168 in old geom.
+ } else {
+ dits[0] = 3.7;
+ dits[1] = 5.4;
+ dits[2] = 0.35;
+ dits[3] = 2;
+ dits[4] = 36;
+ gMC->Gsvolu("I668", "TUBS", idtmed[212], dits, 5); //set freon as cooling fluid
+ // was I168 in old geom.
+ }
+
}
dits[0] = 0;
dits[1] = 360;
dits[2] = 6;
- dits[3] = -34.6;
- dits[4] = 23.495;
- dits[5] = 28.5;
- dits[6] = -27.35;
- dits[7] = 23.495;
- dits[8] = 28.5;
- dits[9] = -27.35;
- dits[10] = 14.595;
- dits[11] = 28.5;
- dits[12] = 27.35;
- dits[13] = 14.595;
- dits[14] = 28.5;
- dits[15] = 27.35;
- dits[16] = 23.495;
- dits[17] = 28.5;
- dits[18] = 34.65;
- dits[19] = 23.495;
- dits[20] = 28.5;
+ dits[3] = -34.6;
+ dits[4] = 23.49;
+ dits[5] = 28;
+ dits[6] = -23.65;
+ dits[7] = 23.49;
+ dits[8] = 28;
+ dits[9] = -23.65;
+ dits[10] = 14.59;
+ dits[11] = 28;
+ dits[12] = 23.65;
+ dits[13] = 14.59;
+ dits[14] = 28;
+ dits[15] = 23.65;
+ dits[16] = 23.49;
+ dits[17] = 28;
+ dits[18] = 34.6;
+ dits[19] = 23.49;
+ dits[20] = 28;
gMC->Gsvolu("IT34", "PCON", idtmed[209], dits, 21);
// block of the SDD electronics and related ladder frame
gMC->Gsvolu("I420", "BOX ", idtmed[264], I420dits, 3);
// positioning-box #2 at SDD end-ladder - F.T. March,7-2001
- I421dits[0] = 0.4400;
- I421dits[1] = 0.4000;
- I421dits[2] = 0.4400;
- gMC->Gsvolu("I421", "BOX ", idtmed[209], I421dits, 3);
+ I421dits[0] = 0.;
+ I421dits[1] = 0.25;
+ I421dits[2] = I420dits[1];
+ gMC->Gsvolu("I421", "TUBE", idtmed[209], I421dits, 3);
// reference ruby-sphere at SDD end-ladder - F.T. March,7-2001
I422dits[0] = 0.0000;
// support for ruby-sphere (I422) - F.T. March,7-2001
I423dits[0] = 0.0000;
I423dits[1] = 0.1000;
- I423dits[2] = (I421dits[1]-I422dits[1])/2.;
+ I423dits[2] = (I420dits[1]-I422dits[1])/2.;
gMC->Gsvolu("I423", "TUBE", idtmed[264], I423dits, 3);
// passage for HV microcables - F.T. March,7-2001
I031dits[2] = I024dits[2];
gMC->Gsvolu("I031", "TUBE", idtmed[264], I031dits, 3);
- // cooling water for the end ladder - F.T. March,7-2001
- I032dits[0] = 0;
- I032dits[1] = I031dits[0];
- I032dits[2] = I024dits[2];
- gMC->Gsvolu("I032", "TUBE", idtmed[211], I032dits, 3);
-
+ if (fluid == 1) {
+ // cooling water for the end ladder - F.T. March,7-2001
+ I032dits[0] = 0;
+ I032dits[1] = I031dits[0];
+ I032dits[2] = I024dits[2];
+ gMC->Gsvolu("I032", "TUBE", idtmed[211], I032dits, 3);
+ } else {
+ // cooling freon for the end ladder - R.B. March,21-2001
+ I032dits[0] = 0;
+ I032dits[1] = I031dits[0];
+ I032dits[2] = I024dits[2];
+ gMC->Gsvolu("I032", "TUBE", idtmed[212], I032dits, 3);
+ }
+
// -- block of the SDD ladder frame holding the electronics
// edge of the ladder frame - part 1
I037dits[2] = I018dits[2];
gMC->Gsvolu("I037", "TUBE", idtmed[264], I037dits, 3);
- // cooling water - F.T. March,7-2001
- I038dits[0] = 0;
- I038dits[1] = I037dits[0];
- I038dits[2] = I018dits[2];
- gMC->Gsvolu("I038", "TUBE", idtmed[211], I038dits, 3);
-
+ if (fluid == 1) {
+ // cooling water - F.T. March,7-2001
+ I038dits[0] = 0;
+ I038dits[1] = I037dits[0];
+ I038dits[2] = I018dits[2];
+ gMC->Gsvolu("I038", "TUBE", idtmed[211], I038dits, 3);
+ } else {
+ // cooling freon - R.B. March,21-2001
+ I038dits[0] = 0;
+ I038dits[1] = I037dits[0];
+ I038dits[2] = I018dits[2];
+ gMC->Gsvolu("I038", "TUBE", idtmed[212], I038dits, 3);
+ }
// -- block of the SDD electronics (heat bridge, chips, hybrid, anode microcable)
// SDD heat bridge - F.T. March,7-2001
I052dits[0] = 1.725000;
I052dits[1] = 0.003743;
I052dits[2] = I039dits[2];
- gMC->Gsvolu("I052", "BOX ", idtmed[82], I052dits, 3);
+ gMC->Gsvolu("I052", "BOX ", idtmed[281], I052dits, 3);
// SDD anode microcable : changed - F.T. March,7-2001
I044dits[0] = I018dits[2];
dits[0] = 0;
dits[1] = 360;
dits[2] = 6;
- dits[3] = -57.5;
- dits[4] = 43.5;
+ dits[3] = -57.45;
+ dits[4] = 43.6;
dits[5] = 48;
- dits[6] = -47.2;
- dits[7] = 43.5;
+ dits[6] = -49.15;
+ dits[7] = 43.6;
dits[8] = 48;
- dits[9] = -47.2;
- dits[10] = 36.7;
+ dits[9] = -49.15;
+ dits[10] = 36.9;
dits[11] = 48;
- dits[12] = 47.2;
- dits[13] = 36.7;
+ dits[12] = 50.55;
+ dits[13] = 36.9;
dits[14] = 48;
- dits[15] = 47.2;
- dits[16] = 43.5;
+ dits[15] = 50.55;
+ dits[16] = 43.6;
dits[17] = 48;
- dits[18] = 56.96;
- dits[19] = 43.5;
+ dits[18] = 57.45;
+ dits[19] = 43.6;
dits[20] = 48;
gMC->Gsvolu("IT56", "PCON", idtmed[220], dits, 21);
dits[2] = 2.1;
gMC->Gsvolu("I562", "BOX ", idtmed[206], dits, 3);
- dits[0] = 0;
- dits[1] = 0.07;
- dits[2] = 3.15;
- gMC->Gsvolu("I559", "TUBE", idtmed[211], dits, 3);
+ if (fluid == 1) {
+ dits[0] = 0;
+ dits[1] = 0.07;
+ dits[2] = 3.15;
+ gMC->Gsvolu("I559", "TUBE", idtmed[211], dits, 3); // set water as cooling fluid
+ } else {
+ dits[0] = 0;
+ dits[1] = 0.07;
+ dits[2] = 3.15;
+ gMC->Gsvolu("I559", "TUBE", idtmed[212], dits, 3); // set freon as cooling fluid
+ }
dits[0] = 0.07;
dits[1] = 0.1;
dits[2] = 1.955;
gMC->Gsvolu("I542", "TUBE", idtmed[210], dits, 3);
- dits[0] = 0;
- dits[1] = 0.07;
- dits[2] = 1.955;
- gMC->Gsvolu("I541", "TUBE", idtmed[211], dits, 3);
+ if (fluid == 1) {
+ dits[0] = 0;
+ dits[1] = 0.07;
+ dits[2] = 1.955;
+ gMC->Gsvolu("I541", "TUBE", idtmed[211], dits, 3); // set water as cooling fluid
+ } else {
+ dits[0] = 0;
+ dits[1] = 0.07;
+ dits[2] = 1.955;
+ gMC->Gsvolu("I541", "TUBE", idtmed[212], dits, 3); // set freon as cooling fluid
+ }
dits[0] = 0.3;
dits[1] = 0.15;
dits[2] = 2;
gMC->Gsvolu("ITS6", "BOX ", idtmed[200], dits, 3);
- dits[0] = 0;
- dits[1] = 0.07;
- dits[2] = 3.15;
- gMC->Gsvolu("I550", "TUBE", idtmed[211], dits, 3);
+ if (fluid == 1) {
+ dits[0] = 0;
+ dits[1] = 0.07;
+ dits[2] = 3.15;
+ gMC->Gsvolu("I550", "TUBE", idtmed[211], dits, 3); // set water as cooling fluid
+ } else {
+ dits[0] = 0;
+ dits[1] = 0.07;
+ dits[2] = 3.15;
+ gMC->Gsvolu("I550", "TUBE", idtmed[212], dits, 3); // set freon as cooling fluid
+ }
dits[0] = 0.07;
dits[1] = 0.1;
dits[3] = 0.08;
gMC->Gsvolu("I517", "TRD1", idtmed[203], dits, 4);
- dits[0] = 0;
- dits[1] = 0.07;
- dits[2] = 1.955;
- gMC->Gsvolu("I531", "TUBE", idtmed[211], dits, 3);
+ if (fluid == 1) {
+ dits[0] = 0;
+ dits[1] = 0.07;
+ dits[2] = 1.955;
+ gMC->Gsvolu("I531", "TUBE", idtmed[211], dits, 3); // set water as cooling fluid
+ } else {
+ dits[0] = 0;
+ dits[1] = 0.07;
+ dits[2] = 1.955;
+ gMC->Gsvolu("I531", "TUBE", idtmed[212], dits, 3); // set freon as cooling fluid
+ }
dits[0] = 0.07;
dits[1] = 0.1;
gMC->Gsvolu("ITS5", "BOX ", idtmed[200], dits, 3);
- // --- Define volumes of shield between SPD and SDD ----------------
+
+ // --- Define volumes of shield of SPD ----------------
dits[0] = 8.37;
gMC->Gsvolu("IC01", "TUBE", idtmed[289], dits, 3);
dits[0] = 8.3;
- dits[1] = 10;
+ dits[1] = 9.995;
dits[2] = 17.5/2.;
gMC->Gsvolu("IC02", "TUBE", idtmed[289], dits, 3);
- // --- Define volumes of cylinder between SDD and SSD --------------
-
+ // --- Define volume of first cylinder between SPD and SDD --------------
- dits[0] = (59.5-0.13/2.)/2.;
- dits[1] = (59.5+0.13/2.)/2.;
- dits[2] = 56.2;
- gMC->Gsvolu("ICY2", "TUBE", idtmed[225], dits, 3);
+ dits[0] = (21.-0.128)/2.;
+ dits[1] = 21./2.;
+ dits[2] = 39.4;
+ gMC->Gsvolu("ICY1", "TUBE", idtmed[208], dits, 3);
+ // --- Define volume of second cylinder between SDD and SSD --------------
+ dits[0] = (59.5-0.128)/2.;
+ dits[1] = 59.5/2.;
+ dits[2] = 56.2; // was 57
+ gMC->Gsvolu("ICY2", "TUBE", idtmed[208], dits, 3);
// --- Define volumes of SDD cone ----------------------------------
dits[2] = 12;
dits[3] = -59.7;
dits[4] = 27;
- dits[5] = 28;
+ dits[5] = 28.6;
dits[6] = -42.7;
dits[7] = 10;
- dits[8] = 28;
+ dits[8] = 28.6;
dits[9] = -34.65;
dits[10] = 10;
- dits[11] = 28;
+ dits[11] = 28.6;
dits[12] = -34.65;
dits[13] = 10;
dits[14] = 23.495;
dits[29] = 23.495;
dits[30] = 34.65;
dits[31] = 10;
- dits[32] = 28;
- dits[33] = 42.6263;
+ dits[32] = 28.6;
+ dits[33] = 42.7;
dits[34] = 10;
- dits[35] = 28;
+ dits[35] = 28.6;
dits[36] = 59.7;
dits[37] = 27.2637;
- dits[38] = 28;
+ dits[38] = 28.6;
gMC->Gsvolu("IS02", "PCON", idtmed[204], dits, 39);
dits[0] = 0;
dits[1] = 360;
dits[2] = 6;
- dits[3] = 39.4;
- dits[4] = 10.065;
- dits[5] = 12.7;
- dits[6] = 40.66;
- dits[7] = 10.065;
- dits[8] = 13.96;
- dits[9] = 40.66;
- dits[10] = 12.1781;
+ dits[3] = 38.65;
+ dits[4] = 10.75;
+ dits[5] = 12.25;
+ dits[6] = 40.15;
+ dits[7] = 10.75;
+ dits[8] = 13.96;
+ dits[9] = 40.15;
+ dits[10] = 12.46;
dits[11] = 13.96;
- dits[12] = 54.7;
- dits[13] = 26.2181;
- dits[14] = 28;
- dits[15] = 55.2219;
- dits[16] = 26.74;
- dits[17] = 28;
- dits[18] = 57.4;
- dits[19] = 26.74;
- dits[20] = 28;
+ dits[12] = 55.75;
+ dits[13] = 27;
+ dits[14] = 28.5;
+ dits[15] = 55.75;
+ dits[16] = 27;
+ dits[17] = 28.5;
+ dits[18] = 57.25;
+ dits[19] = 27;
+ dits[20] = 28.5;
gMC->Gsvolu("I093", "PCON", idtmed[272], dits, 21); // SDD cone
dits[0] = 0;
dits[1] = 50;
dits[2] = 3;
- dits[3] = 27.35; // 23.7
+ dits[3] = 39;
dits[4] = 14;
dits[5] = 18.75;
dits[6] = 46.7-3;
dits[9] = 51.45-3;
dits[10] = 18.75;
dits[11] = 18.75;
- gMC->Gsvolu("I099", "PCON", idtmed[292], dits, 12); // SDD 3 end-ladder elect.
+ gMC->Gsvolu("I099", "PCON", idtmed[204], dits, 12); // SDD 3 cone hole
dits[0] = 0;
dits[1] = 25;
dits[2] = 3;
- dits[3] = 34.65;
+ dits[3] = 49;
dits[4] = 23.4;
dits[5] = 26.4;
dits[6] = 56.1-3;
dits[9] = 59.1-3;
dits[10] = 26.4;
dits[11] = 26.4;
- gMC->Gsvolu("I200", "PCON", idtmed[292], dits, 12); // SDD 4 end-ladder elect.
+ gMC->Gsvolu("I200", "PCON", idtmed[204], dits, 12); // SDD 4 cone hole
- dits[0] = 10.065;
- dits[1] = 11;
+ dits[0] = 10.0;
+ dits[1] = 10.5;
dits[2] = 0.25;
- gMC->Gsvolu("I090", "TUBE", idtmed[208], dits, 3);
-
- dits[0] = 10.001;
- dits[1] = 10.065;
- dits[2] = 40;
- gMC->Gsvolu("I089", "TUBE", idtmed[208], dits, 3);
+ gMC->Gsvolu("I090", "TUBE", idtmed[224], dits, 3); // SDD cylinder flange
dits[0] = 21.95;
- dits[1] = 24.2;
+ dits[1] = 22.95;
dits[2] = 1;
- gMC->Gsvolu("I098", "TUBE", idtmed[204], dits, 3);
+ gMC->Gsvolu("I098", "TUBE", idtmed[283], dits, 3); // ladder support on layer 4
- dits[0] = 13.1;
- dits[1] = 15.4;
+ dits[0] = 13.1;
+ dits[1] = 14.1;
dits[2] = 1;
- gMC->Gsvolu("I097", "TUBE", idtmed[204], dits, 3);
+ gMC->Gsvolu("I097", "TUBE", idtmed[283], dits, 3); // ladder support on layer 3
dits[0] = 1;
dits[1] = 1;
dits[0] = 0;
dits[1] = 360;
dits[2] = 12;
- dits[3] = -77.2;
- dits[4] = 46;
- dits[5] = 47;
+ dits[3] = -zmax;
+ dits[4] = 46;
+ dits[5] = 49.25;
dits[6] = -61.2;
- dits[7] = 28.5;
- dits[8] = 47;
+ dits[7] = 28.7;
+ dits[8] = 49.25;
dits[9] = -57.5;
- dits[10] = 28.5;
- dits[11] = 47;
+ dits[10] = 28.7;
+ dits[11] = 49.25;
dits[12] = -57.5;
- dits[13] = 28.5;
+ dits[13] = 28.7;
dits[14] = 43.5;
- dits[15] = -51.365;
- dits[16] = 28.5;
+ dits[15] = -49.2;
+ dits[16] = 28.7;
dits[17] = 43.5;
- dits[18] = -51.365;
- dits[19] = 28.5;
- dits[20] = 36.69;
- dits[21] = 51.3651;
- dits[22] = 28.5;
- dits[23] = 36.69;
- dits[24] = 51.3651;
- dits[25] = 28.5;
+ dits[18] = -49.2;
+ dits[19] = 28.7;
+ dits[20] = 36.85;
+ dits[21] = 50.6;
+ dits[22] = 28.7;
+ dits[23] = 36.85;
+ dits[24] = 50.6;
+ dits[25] = 28.7;
dits[26] = 43.5;
- dits[27] = 56.96;
- dits[28] = 28.5;
+ dits[27] = 57.5;
+ dits[28] = 28.7;
dits[29] = 43.5;
- dits[30] = 56.96;
- dits[31] = 28.5;
- dits[32] = 47;
- dits[33] = 60.66;
- dits[34] = 28.5;
- dits[35] = 47;
- dits[36] = 77.2;
- dits[37] = 46;
- dits[38] = 47;
- gMC->Gsvolu("IS01", "PCON", idtmed[204], dits, 39);
+ dits[30] = 57.5;
+ dits[31] = 28.7;
+ dits[32] = 49.25;
+ dits[33] = 61.2;
+ dits[34] = 28.7;
+ dits[35] = 49.25;
+ dits[36] = zmax;
+ dits[37] = 46;
+ dits[38] = 49.25;
+ gMC->Gsvolu("IS01", "PCON", idtmed[204], dits, 39); // SSD cone mother volume
dits[0] = 0;
dits[1] = 360;
dits[2] = 6;
- dits[3] = -77.2;
- dits[4] = 46;
- dits[5] = 48.5;
- dits[6] = -73.5;
- dits[7] = 46;
- dits[8] = 47.5;
- dits[9] = -72.7819;
- dits[10] = 46;
- dits[11] = 47.2819;
- dits[12] = -59.5;
- dits[13] = 31.2181;
- dits[14] = 33;
- dits[15] = -59.5;
- dits[16] = 28;
- dits[17] = 33;
- dits[18] = -57;
- dits[19] = 28;
- dits[20] = 30.5;
+ dits[3] = -zmax;
+ dits[4] = 47.75;
+ dits[5] = 49.25;
+ dits[6] = -zmax+2.;
+ dits[7] = 47.75;
+ dits[8] = 49.25;
+ dits[9] = -71.2819;
+ dits[10] = 46.75;
+ dits[11] = 49.0319;
+ dits[12] = -57.25; // was 58.5
+ dits[13] = 32.9681;
+ dits[14] = 34.75;
+ dits[15] = -57.25; // was 58.5
+ dits[16] = 30;
+ dits[17] = 34.75;
+ dits[18] = -55.75; // was 57
+ dits[19] = 30;
+ dits[20] = 32.25; // was 31.5
gMC->Gsvolu("I212", "PCON", idtmed[272], dits, 21); // SSD cone
- dits[0] = 28;
- dits[1] = 29.82;
+ dits[0] = 28.75;
+ dits[1] = 29.75;
dits[2] = 0.5;
- gMC->Gsvolu("I211", "TUBE", idtmed[219], dits, 3);
-
- dits[0] = 37.35;
- dits[1] = 38.25;
- dits[2] = 1;
- gMC->Gsvolu("I217", "TUBE", idtmed[224], dits, 3);
+ gMC->Gsvolu("I211", "TUBE", idtmed[224], dits, 3); // SSD cylinder flange
- dits[0] = 38.25;
- dits[1] = 39.08;
+ dits[0] = 35.8;
+ dits[1] = 36.8;
dits[2] = 1;
- gMC->Gsvolu("I218", "TUBE", idtmed[264], dits, 3);
+ gMC->Gsvolu("I217", "TUBE", idtmed[283], dits, 3); // ladder support on layer 5
- dits[0] = 41.85;
- dits[1] = 42.75;
+ dits[0] = 41.4;
+ dits[1] = 42.4;
dits[2] = 1;
- gMC->Gsvolu("I219", "TUBE", idtmed[224], dits, 3);
-
- dits[0] = 42.75;
- dits[1] = 43.58;
- dits[2] = 1;
- gMC->Gsvolu("I220", "TUBE", idtmed[264], dits, 3);
-
- dits[0] = 42.1;
- dits[1] = 42.5;
+ gMC->Gsvolu("I219", "TUBE", idtmed[283], dits, 3); // ladder support on layer 6
+
+ dits[0] = 42.05+5.;
+ dits[1] = 42.55+5.;
dits[2] = 1.25;
- gMC->Gsvolu("I214", "TUBE", idtmed[224], dits, 3);
-
- dits[0] = 37.1;
- dits[1] = 37.5;
+ gMC->Gsvolu("I214", "TUBE", idtmed[224], dits, 3); // layer 6 electronic support
+ // this will change after PPR
+ dits[0] = 37.05+5.;
+ dits[1] = 37.55+5.;
dits[2] = 1.25;
- gMC->Gsvolu("I213", "TUBE", idtmed[224], dits, 3);
-
+ gMC->Gsvolu("I213", "TUBE", idtmed[224], dits, 3); // layer 5 electronic support
+ // this will change after PPR
dits[0] = 0;
dits[1] = 25;
dits[2] = 5;
- dits[3] = -77.2+3;
- dits[4] = 44.5;
- dits[5] = 44.5;
+ dits[3] = -zmax+3;
+ dits[4] = 45.5;
+ dits[5] = 45.5;
dits[6] = -69.7+3;
dits[7] = 37;
- dits[8] = 44.5;
+ dits[8] = 45.5;
dits[9] = -68.5+3;
dits[10] = 37;
- dits[11] = 44.5;
+ dits[11] = 45.5;
dits[12] = -68.5+4.8;
dits[13] = 37;
- dits[14] = 44.5;
+ dits[14] = 45.5;
dits[15] = -63.5+4.8;
dits[16] = 37;
- dits[17] = 44.5;
- gMC->Gsvolu("I215", "PCON", idtmed[294], dits, 18); // SSD end-ladder elect.
+ dits[17] = 45.5;
+ gMC->Gsvolu("I215", "PCON", idtmed[204], dits, 18); // SSD cone hole
dits[0] = 0;
dits[1] = 3.2;
dits[2] = 9;
- dits[3] = -16.45;
+ dits[3] = -14;
dits[4] = 30.5;
dits[5] = 33.5;
- dits[6] = -7.85;
+ dits[6] = -9.85;
dits[7] = 30.5;
dits[8] = 33.5;
- dits[9] = -7.85;
+ dits[9] = -9.85;
dits[10] = 30.5;
- dits[11] = 41.85;
- dits[12] = -5.85;
+ dits[11] = 43.45;
+ dits[12] = -7.85;
dits[13] = 30.5;
- dits[14] = 41.85;
- dits[15] = -5.85;
+ dits[14] = 43.45;
+ dits[15] = -7.85;
dits[16] = 30.5;
dits[17] = 36.5;
- dits[18] = -5;
+ dits[18] = -7;
dits[19] = 30.5;
dits[20] = 36.5;
- dits[21] = -2;
+ dits[21] = -4;
dits[22] = 33.0173;
dits[23] = 36.5;
- dits[24] = -2;
+ dits[24] = -4;
dits[25] = 33.0173;
- dits[26] = 37.35;
- dits[27] = 0;
+ dits[26] = 36.80;
+ dits[27] = -2;
dits[28] = 34.6955;
- dits[29] = 37.35;
- gMC->Gsvolu("I216", "PCON", idtmed[272], dits, 30);
+ dits[29] = 36.80;
+ gMC->Gsvolu("I216", "PCON", idtmed[272], dits, 30); // supports (1-6) of the ladders
// --- Place SPD (option 'a') volumes into their mother volume IT12
gMC->Gspos("I126",2,"I12A",-0.7799,7.2874,0.0,idrotm[217],"ONLY");
gMC->Gspos("I125",2,"I12A",-0.6315,7.0883,0.0,idrotm[216],"ONLY");
gMC->Gspos("I124",2,"I12A",-0.4965,6.8742,0.0,idrotm[215],"ONLY");
- gMC->Gspos("I103",3,"I10A",-0.05,-di10a[1]+2.*di104[1]+di103[1],-3.536,idrotm[237],"ONLY");
- gMC->Gspos("I103",4,"I10A",-0.05,-di10a[1]+2.*di104[1]+di103[1],-10.708,idrotm[237],"ONLY");
+ gMC->Gspos("I103",3,"I10A",-0.05,-di10a[1]+2.*di104[1]+di103[1],-3.536,0,"ONLY");
+ gMC->Gspos("I103",4,"I10A",-0.05,-di10a[1]+2.*di104[1]+di103[1],-10.708,0,"ONLY");
gMC->Gspos("I103",1,"I10A",-0.05,-di10a[1]+2.*di104[1]+di103[1],10.708,0,"ONLY");
gMC->Gspos("I103",2,"I10A",-0.05,-di10a[1]+2.*di104[1]+di103[1],3.536,0,"ONLY");
gMC->Gspos("I105",1,"I10A",-0.05,0.01,-16.844,idrotm[237],"ONLY");
gMC->Gspos("I105",2,"I10A",-0.05,0.01,16.844,0,"ONLY");
gMC->Gspos("I104",1,"I10A",0.0,-di10a[1]+di104[1],0.0,0,"ONLY");
- gMC->Gspos("I1D3",3,"I20A",-0.05,-di20a[1]+2.*di104[1]+di1d3[1],-3.536,idrotm[237],"ONLY");
- gMC->Gspos("I1D3",4,"I20A",-0.05,-di20a[1]+2.*di104[1]+di1d3[1],-10.708,idrotm[237],"ONLY");
+ gMC->Gspos("I1D3",3,"I20A",-0.05,-di20a[1]+2.*di104[1]+di1d3[1],-3.536,0,"ONLY");
+ gMC->Gspos("I1D3",4,"I20A",-0.05,-di20a[1]+2.*di104[1]+di1d3[1],-10.708,0,"ONLY");
gMC->Gspos("I1D3",1,"I20A",-0.05,-di20a[1]+2.*di104[1]+di1d3[1],10.708,0,"ONLY");
gMC->Gspos("I1D3",2,"I20A",-0.05,-di20a[1]+2.*di104[1]+di1d3[1],3.536,0,"ONLY");
gMC->Gspos("I105",3,"I20A",-0.05,0.01,-16.844,idrotm[237],"ONLY");
gMC->Gspos("I105",4,"I10B",-0.05,-0.01,16.844,0,"ONLY");
gMC->Gspos("I107",2,"I10B",-0.0455,-di10b[1]+di107[1],3.536,0,"ONLY");
gMC->Gspos("I107",1,"I10B",-0.0455,-di10b[1]+di107[1],10.708,0,"ONLY");
- gMC->Gspos("I107",4,"I10B",-0.0455,-di10b[1]+di107[1],-10.708,idrotm[201],"ONLY");
- gMC->Gspos("I107",3,"I10B",-0.0455,-di10b[1]+di107[1],-3.536,idrotm[201],"ONLY");
+ gMC->Gspos("I107",4,"I10B",-0.0455,-di10b[1]+di107[1],-10.708,0,"ONLY");
+ gMC->Gspos("I107",3,"I10B",-0.0455,-di10b[1]+di107[1],-3.536,0,"ONLY");
gMC->Gspos("I109",1,"I10B",-0.138,0.015,-16.844,idrotm[201],"ONLY");
gMC->Gspos("I109",2,"I10B",-0.138,0.015,16.844,0,"ONLY");
gMC->Gspos("I108",1,"I10B",-0.138,-di10b[1]+2.*di107[1]+di108[1],0.0,0,"ONLY");
xI424 = I028dits[0]/3.;
yI424 = -I028dits[1]+I424dits[1];
gMC->Gspos("I422", 1,"I421", 0.0, 0.0, 0.0, 0, "ONLY");
- gMC->Gspos("I423", 1,"I421", 0.0, -I421dits[1]+I423dits[2], 0.0, idrotm[312], "ONLY");
- gMC->Gspos("I421", 1,"I420", 0.0, 0.0, 0.0, 0, "ONLY");
+ gMC->Gspos("I423", 1,"I421", 0.0, 0.0, I421dits[2]-I423dits[2], 0, "ONLY");
+ gMC->Gspos("I421", 1,"I420", 0.0, 0.0, 0.0, idrotm[312], "ONLY");
gMC->Gspos("I420", 1,"I028", -I028dits[0]/3., I028dits[1]-I420dits[1], 0.0, 0, "ONLY");
gMC->Gspos("I424", 1,"I028", xI424, yI424, 0.0, 0, "ONLY");
gMC->Gspos("I028", 1,"I024", 0.0, I028dits[1]-I024dits[1], I024dits[2]-I028dits[2], 0, "MANY");
gMC->Gspos("I570",34,"IT56",21.7497,40.1899,-0.27,idrotm[549],"ONLY");
gMC->Gspos("I570",35,"IT56",14.7884,43.0772,-0.27,idrotm[550],"ONLY");
gMC->Gspos("I570",36,"IT56",7.5216,45.0744,-0.27,idrotm[551],"ONLY");
- gMC->Gspos("I570",37,"IT56",-0.27,45.545,-0.27,0,"ONLY");
+ gMC->Gspos("I570",37,"IT56",0.,45.545,-0.27,0,"ONLY");
gMC->Gspos("I570",38,"IT56",-7.5216,45.0744,-0.27,idrotm[552],"ONLY");
gMC->Gspos("I570",1,"IT56",-14.7884,43.0772,-0.27,idrotm[553],"ONLY");
gMC->Gspos("I570",2,"IT56",-21.7497,40.1899,-0.27,idrotm[620],"ONLY");
//gMC->Gspos("IC03",2,"ITSD",0.0,0.0,-25.-17.5-7.875,idrotm[200],"ONLY");
- // --- Place volumes of shield between SDD and SSD
+ // --- Place volumes of cylinders between SPD and SDD and SDD and SSD
-
- gMC->Gspos("ICY2",1,"ITSD",0.0,0.0,-0.7,0,"ONLY");
+ gMC->Gspos("ICY1",1,"IS02",0.0,0.0,0.,0,"ONLY");
+ gMC->Gspos("ICY2",1,"IS01",0.0,0.0,0.,0,"ONLY");
// --- Place volumes of SDD cone ----------------------------------
gMC->Gspos("I093",1,"IS02",0.0,0.0,0.0,0,"MANY");
gMC->Gspos("I093",2,"IS02",0.0,0.0,0.0,idrotm[856],"MANY");
- gMC->Gspos("I099",4,"IS02",0.0,0.0,0.0,idrotm[857],"ONLY");
- gMC->Gspos("I099",3,"IS02",0.0,0.0,0.0,idrotm[858],"ONLY");
- gMC->Gspos("I099",5,"IS02",0.0,0.0,0.0,idrotm[859],"ONLY");
- gMC->Gspos("I099",6,"IS02",0.0,0.0,0.0,idrotm[860],"ONLY");
- gMC->Gspos("I099",7,"IS02",0.0,0.0,0.0,idrotm[861],"ONLY");
- gMC->Gspos("I099",2,"IS02",0.0,0.0,0.0,idrotm[862],"ONLY");
- gMC->Gspos("I200",4,"IS02",0.0,0.0,0.0,idrotm[863],"ONLY");
- gMC->Gspos("I200",3,"IS02",0.0,0.0,0.0,idrotm[864],"ONLY");
- gMC->Gspos("I200",2,"IS02",0.0,0.0,0.0,idrotm[865],"ONLY");
- gMC->Gspos("I200",13,"IS02",0.0,0.0,0.0,idrotm[867],"ONLY");
- gMC->Gspos("I200",12,"IS02",0.0,0.0,0.0,idrotm[869],"ONLY");
- gMC->Gspos("I200",11,"IS02",0.0,0.0,0.0,idrotm[870],"ONLY");
- gMC->Gspos("I200",10,"IS02",0.0,0.0,0.0,idrotm[871],"ONLY");
- gMC->Gspos("I200",9,"IS02",0.0,0.0,0.0,idrotm[872],"ONLY");
- gMC->Gspos("I200",8,"IS02",0.0,0.0,0.0,idrotm[873],"ONLY");
- gMC->Gspos("I200",7,"IS02",0.0,0.0,0.0,idrotm[874],"ONLY");
- gMC->Gspos("I200",6,"IS02",0.0,0.0,0.0,idrotm[875],"ONLY");
- gMC->Gspos("I200",5,"IS02",0.0,0.0,0.0,idrotm[876],"ONLY");
- gMC->Gspos("I090",2,"IS02",0.0,0.0,-39.15,0,"ONLY");
- //gMC->Gspos("I089",1,"IS02",0.0,0.0,0.0,0,"ONLY"); // old cylind. shield
- gMC->Gspos("I090",1,"IS02",0.0,0.0,39.15,idrotm[856],"ONLY");
+ gMC->Gspos("I099",4,"IS02",0.0,0.0,0.0,idrotm[857],"MANY");
+ gMC->Gspos("I099",3,"IS02",0.0,0.0,0.0,idrotm[858],"MANY");
+ gMC->Gspos("I099",5,"IS02",0.0,0.0,0.0,idrotm[859],"MANY");
+ gMC->Gspos("I099",6,"IS02",0.0,0.0,0.0,idrotm[860],"MANY");
+ gMC->Gspos("I099",7,"IS02",0.0,0.0,0.0,idrotm[861],"MANY");
+ gMC->Gspos("I099",2,"IS02",0.0,0.0,0.0,idrotm[862],"MANY");
+ gMC->Gspos("I200",4,"IS02",0.0,0.0,0.0,idrotm[863],"MANY");
+ gMC->Gspos("I200",3,"IS02",0.0,0.0,0.0,idrotm[864],"MANY");
+ gMC->Gspos("I200",2,"IS02",0.0,0.0,0.0,idrotm[865],"MANY");
+ gMC->Gspos("I200",13,"IS02",0.0,0.0,0.0,idrotm[867],"MANY");
+ gMC->Gspos("I200",12,"IS02",0.0,0.0,0.0,idrotm[869],"MANY");
+ gMC->Gspos("I200",11,"IS02",0.0,0.0,0.0,idrotm[870],"MANY");
+ gMC->Gspos("I200",10,"IS02",0.0,0.0,0.0,idrotm[871],"MANY");
+ gMC->Gspos("I200",9,"IS02",0.0,0.0,0.0,idrotm[872],"MANY");
+ gMC->Gspos("I200",8,"IS02",0.0,0.0,0.0,idrotm[873],"MANY");
+ gMC->Gspos("I200",7,"IS02",0.0,0.0,0.0,idrotm[874],"MANY");
+ gMC->Gspos("I200",6,"IS02",0.0,0.0,0.0,idrotm[875],"MANY");
+ gMC->Gspos("I200",5,"IS02",0.0,0.0,0.0,idrotm[876],"MANY");
+ gMC->Gspos("I090",2,"IS02",0.0,0.0,-39.4,0,"ONLY");
+ gMC->Gspos("I090",1,"IS02",0.0,0.0,39.4,idrotm[856],"ONLY");
gMC->Gspos("I099",9,"IS02",0.0,0.0,0.0,idrotm[877],"ONLY");
gMC->Gspos("I099",8,"IS02",0.0,0.0,0.0,idrotm[879],"ONLY");
gMC->Gspos("I099",1,"IS02",0.0,0.0,0.0,idrotm[880],"ONLY");
gMC->Gspos("I200",21,"IS02",0.0,0.0,0.0,idrotm[892],"ONLY");
gMC->Gspos("I200",20,"IS02",0.0,0.0,0.0,idrotm[868],"ONLY");
gMC->Gspos("I200",19,"IS02",0.0,0.0,0.0,idrotm[893],"ONLY");
- gMC->Gspos("I098",1,"IS02",0.0,0.0,32.1,0,"ONLY");
- gMC->Gspos("I097",1,"IS02",0.0,0.0,25.1,0,"ONLY");
- gMC->Gspos("I097",2,"IS02",0.0,0.0,-25.1,idrotm[856],"ONLY");
- gMC->Gspos("I098",2,"IS02",0.0,0.0,-32.1,idrotm[856],"ONLY");
+ gMC->Gspos("I098",1,"IS02",0.0,0.0,33.6,0,"ONLY");
+ gMC->Gspos("I097",1,"IS02",0.0,0.0,26.6,0,"ONLY");
+ gMC->Gspos("I097",2,"IS02",0.0,0.0,-26.6,idrotm[856],"ONLY");
+ gMC->Gspos("I098",2,"IS02",0.0,0.0,-33.6,idrotm[856],"ONLY");
gMC->Gspos("I202",1,"IS02",12.1,0.0,33.84,0,"ONLY");
gMC->Gspos("I202",6,"IS02",-6.05,-10.4789,33.84,idrotm[930],"ONLY");
gMC->Gspos("I202",5,"IS02",-6.05,10.4789,33.84,idrotm[929],"ONLY");
// --- Place volumes of SSD cone ----------------------------------
- gMC->Gspos("I212",2,"IS01",0.0,0.0,0.0,idrotm[701],"MANY"); // old z=-1.4
+ gMC->Gspos("I212",2,"IS01",0.0,0.0,0.0,idrotm[701],"MANY");
gMC->Gspos("I212",1,"IS01",0.0,0.0,0.0,0,"MANY");
- //gMC->Gspos("I210",1,"IS01",0.0,0.0,-0.7,0,"ONLY"); // old cylind. shield
gMC->Gspos("I211",1,"IS01",0.0,0.0,-56.5,0,"ONLY");
- gMC->Gspos("I217",1,"IS01",0.0,0.0,-47.75,0,"ONLY");
- gMC->Gspos("I218",1,"IS01",0.0,0.0,-47.75,0,"ONLY");
- gMC->Gspos("I219",1,"IS01",0.0,0.0,-53.6,0,"ONLY");
- gMC->Gspos("I220",1,"IS01",0.0,0.0,-53.6,0,"ONLY");
- gMC->Gspos("I211",2,"IS01",0.0,0.0,55.1,idrotm[701],"ONLY");
- gMC->Gspos("I219",2,"IS01",0.0,0.0,52.2,idrotm[701],"ONLY");
- gMC->Gspos("I220",2,"IS01",0.0,0.0,52.2,idrotm[701],"ONLY");
- gMC->Gspos("I217",2,"IS01",0.0,0.0,46.35,idrotm[701],"ONLY");
- gMC->Gspos("I218",2,"IS01",0.0,0.0,46.35,idrotm[701],"ONLY");
- gMC->Gspos("I214",2,"IS01",0.0,0.0,65.85,idrotm[701],"ONLY");
- gMC->Gspos("I213",2,"IS01",0.0,0.0,60.85,idrotm[701],"ONLY");
- gMC->Gspos("I213",1,"IS01",0.0,0.0,-62.25,0,"ONLY");
- gMC->Gspos("I214",1,"IS01",0.0,0.0,-67.25,0,"ONLY");
- gMC->Gspos("I215",19,"IS01",0.0,0.0,-1.4,idrotm[702],"ONLY");
- gMC->Gspos("I215",21,"IS01",0.0,0.0,-1.4,idrotm[703],"ONLY");
- gMC->Gspos("I215",23,"IS01",0.0,0.0,-1.4,idrotm[704],"ONLY");
- gMC->Gspos("I215",24,"IS01",0.0,0.0,-1.4,idrotm[705],"ONLY");
- gMC->Gspos("I215",3,"IS01",0.0,0.0,-1.4,idrotm[706],"ONLY");
- gMC->Gspos("I215",5,"IS01",0.0,0.0,-1.4,idrotm[707],"ONLY");
- gMC->Gspos("I215",7,"IS01",0.0,0.0,-1.4,idrotm[708],"ONLY");
- gMC->Gspos("I215",9,"IS01",0.0,0.0,-1.4,idrotm[709],"ONLY");
- gMC->Gspos("I215",11,"IS01",0.0,0.0,-1.4,idrotm[710],"ONLY");
- gMC->Gspos("I215",13,"IS01",0.0,0.0,-1.4,idrotm[711],"ONLY");
- gMC->Gspos("I215",15,"IS01",0.0,0.0,-1.4,idrotm[712],"ONLY");
- gMC->Gspos("I215",17,"IS01",0.0,0.0,-1.4,idrotm[713],"ONLY");
- gMC->Gspos("I216",9,"IS01",0.0,0.0,45.35,idrotm[714],"ONLY");
- gMC->Gspos("I216",11,"IS01",0.0,0.0,45.35,idrotm[715],"ONLY");
- gMC->Gspos("I216",12,"IS01",0.0,0.0,45.35,idrotm[716],"ONLY");
- gMC->Gspos("I216",3,"IS01",0.0,0.0,45.35,idrotm[717],"ONLY");
- gMC->Gspos("I216",5,"IS01",0.0,0.0,45.35,idrotm[718],"ONLY");
- gMC->Gspos("I216",7,"IS01",0.0,0.0,45.35,idrotm[719],"ONLY");
- gMC->Gspos("I216",10,"IS01",0.0,0.0,-46.75,idrotm[720],"ONLY");
- gMC->Gspos("I216",1,"IS01",0.0,0.0,-46.75,idrotm[721],"ONLY");
- gMC->Gspos("I216",2,"IS01",0.0,0.0,-46.75,idrotm[722],"ONLY");
- gMC->Gspos("I216",4,"IS01",0.0,0.0,-46.75,idrotm[723],"ONLY");
- gMC->Gspos("I216",6,"IS01",0.0,0.0,-46.75,idrotm[724],"ONLY");
- gMC->Gspos("I216",8,"IS01",0.0,0.0,-46.75,idrotm[725],"ONLY");
- gMC->Gspos("I215",1,"IS01",0.0,0.0,0.0,idrotm[726],"ONLY");
- gMC->Gspos("I215",2,"IS01",0.0,0.0,0.0,idrotm[727],"ONLY");
- gMC->Gspos("I215",4,"IS01",0.0,0.0,0.0,idrotm[728],"ONLY");
- gMC->Gspos("I215",6,"IS01",0.0,0.0,0.0,idrotm[729],"ONLY");
- gMC->Gspos("I215",8,"IS01",0.0,0.0,0.0,idrotm[733],"ONLY");
- gMC->Gspos("I215",10,"IS01",0.0,0.0,0.0,idrotm[730],"ONLY");
- gMC->Gspos("I215",12,"IS01",0.0,0.0,0.0,idrotm[731],"ONLY");
- gMC->Gspos("I215",14,"IS01",0.0,0.0,0.0,idrotm[768],"ONLY");
- gMC->Gspos("I215",16,"IS01",0.0,0.0,0.0,idrotm[732],"ONLY");
- gMC->Gspos("I215",18,"IS01",0.0,0.0,0.0,idrotm[734],"ONLY");
- gMC->Gspos("I215",20,"IS01",0.0,0.0,0.0,idrotm[798],"ONLY");
- gMC->Gspos("I215",22,"IS01",0.0,0.0,0.0,idrotm[735],"ONLY");
+ gMC->Gspos("I217",1,"IS01",0.0,0.0,-44.4,0,"ONLY"); // this will change after PPR to be symmetric
+ gMC->Gspos("I219",1,"IS01",0.0,0.0,-50.25,0,"ONLY"); // this will change after PPR to be symmetric
+ gMC->Gspos("I211",2,"IS01",0.0,0.0,56.5,idrotm[701],"ONLY");
+ gMC->Gspos("I219",2,"IS01",0.0,0.0,51.65,idrotm[701],"ONLY"); // this will change after PPR to be symmetric
+ gMC->Gspos("I217",2,"IS01",0.0,0.0,45.8,idrotm[701],"ONLY"); // this will change after PPR to be symmetric
+ gMC->Gspos("I214",2,"IS01",0.0,0.0,67.25,idrotm[701],"ONLY");
+ gMC->Gspos("I213",2,"IS01",0.0,0.0,62.25,idrotm[701],"ONLY");
+ gMC->Gspos("I213",1,"IS01",0.0,0.0,-62.25,0,"ONLY");
+ gMC->Gspos("I214",1,"IS01",0.0,0.0,-67.25,0,"ONLY");
+ gMC->Gspos("I215",19,"IS01",0.0,0.0,0.0,idrotm[702],"MANY");
+ gMC->Gspos("I215",21,"IS01",0.0,0.0,0.0,idrotm[703],"MANY");
+ gMC->Gspos("I215",23,"IS01",0.0,0.0,0.0,idrotm[704],"MANY");
+ gMC->Gspos("I215",24,"IS01",0.0,0.0,0.0,idrotm[705],"MANY");
+ gMC->Gspos("I215",3,"IS01",0.0,0.0,0.0,idrotm[706],"MANY");
+ gMC->Gspos("I215",5,"IS01",0.0,0.0,0.0,idrotm[707],"MANY");
+ gMC->Gspos("I215",7,"IS01",0.0,0.0,0.0,idrotm[708],"MANY");
+ gMC->Gspos("I215",9,"IS01",0.0,0.0,0.0,idrotm[709],"MANY");
+ gMC->Gspos("I215",11,"IS01",0.0,0.0,0.0,idrotm[710],"MANY");
+ gMC->Gspos("I215",13,"IS01",0.0,0.0,0.0,idrotm[711],"MANY");
+ gMC->Gspos("I215",15,"IS01",0.0,0.0,0.0,idrotm[712],"MANY");
+ gMC->Gspos("I215",17,"IS01",0.0,0.0,0.0,idrotm[713],"MANY");
+ gMC->Gspos("I216",9,"IS01",0.0,0.0,45.5,idrotm[714],"ONLY");
+ gMC->Gspos("I216",11,"IS01",0.0,0.0,45.5,idrotm[715],"ONLY");
+ gMC->Gspos("I216",12,"IS01",0.0,0.0,45.5,idrotm[716],"ONLY");
+ gMC->Gspos("I216",3,"IS01",0.0,0.0,45.5,idrotm[717],"ONLY");
+ gMC->Gspos("I216",5,"IS01",0.0,0.0,45.5,idrotm[718],"ONLY");
+ gMC->Gspos("I216",7,"IS01",0.0,0.0,45.5,idrotm[719],"ONLY");
+ gMC->Gspos("I216",10,"IS01",0.0,0.0,-44,idrotm[720],"ONLY");
+ gMC->Gspos("I216",1,"IS01",0.0,0.0,-44,idrotm[721],"ONLY");
+ gMC->Gspos("I216",2,"IS01",0.0,0.0,-44,idrotm[722],"ONLY");
+ gMC->Gspos("I216",4,"IS01",0.0,0.0,-44,idrotm[723],"ONLY");
+ gMC->Gspos("I216",6,"IS01",0.0,0.0,-44,idrotm[724],"ONLY");
+ gMC->Gspos("I216",8,"IS01",0.0,0.0,-44,idrotm[725],"ONLY");
+ gMC->Gspos("I215",1,"IS01",0.0,0.0,0.0,idrotm[726],"MANY");
+ gMC->Gspos("I215",2,"IS01",0.0,0.0,0.0,idrotm[727],"MANY");
+ gMC->Gspos("I215",4,"IS01",0.0,0.0,0.0,idrotm[728],"MANY");
+ gMC->Gspos("I215",6,"IS01",0.0,0.0,0.0,idrotm[729],"MANY");
+ gMC->Gspos("I215",8,"IS01",0.0,0.0,0.0,idrotm[733],"MANY");
+ gMC->Gspos("I215",10,"IS01",0.0,0.0,0.0,idrotm[730],"MANY");
+ gMC->Gspos("I215",12,"IS01",0.0,0.0,0.0,idrotm[731],"MANY");
+ gMC->Gspos("I215",14,"IS01",0.0,0.0,0.0,idrotm[768],"MANY");
+ gMC->Gspos("I215",16,"IS01",0.0,0.0,0.0,idrotm[732],"MANY");
+ gMC->Gspos("I215",18,"IS01",0.0,0.0,0.0,idrotm[734],"MANY");
+ gMC->Gspos("I215",20,"IS01",0.0,0.0,0.0,idrotm[798],"MANY");
+ gMC->Gspos("I215",22,"IS01",0.0,0.0,0.0,idrotm[735],"MANY");
// --- Place subdetectors' mother volumes and supports' mother volumes
// **************************** SERVICES *********************************
+ // --- DEFINE CABLES AT THE END OF THE ITS CONES - COPPER PART
+ // UPPER PART
+
+ dgh[0] = 46.;
+ dgh[1] = 46.+1.0;
+ dgh[2] = 9.5;
+ dgh[3] = 12.;
+ dgh[4] = 168.;
+
+ gMC->Gsvolu("I1CU", "TUBS", idtmed[213], dgh, 5);
+ gMC->Gspos("I1CU", 1, "ITSV", 0., 0., 83.5, 0, "ONLY");
+ gMC->Gspos("I1CU", 2, "ITSV", 0., 0., -83.5, idrotm[200], "ONLY");
// --- DEFINE CABLES AT THE END OF THE ITS CONES - COPPER PART
+ // LOWER PART
+
+ dgh[0] = 46.;
+ dgh[1] = 46.+1.0;
+ dgh[2] = 9.5;
+ dgh[3] = 192.;
+ dgh[4] = 348.;
+
+ gMC->Gsvolu("I2CU", "TUBS", idtmed[213], dgh, 5);
+ gMC->Gspos("I2CU", 1, "ITSV", 0., 0., 83.5, 0, "ONLY");
+ gMC->Gspos("I2CU", 2, "ITSV", 0., 0., -83.5, idrotm[200], "ONLY");
+
+
+ // --- DEFINE CABLES AT THE END OF THE ITS CONES - CARBON PART
+ // UPPER PART
- dgh[0] = 46.;
- dgh[1] = 46.+1.0;
+ dgh[0] = 46.+1.0;
+ dgh[1] = 46.+1.0+1.5;
dgh[2] = 9.5;
+ dgh[3] = 12.;
+ dgh[4] = 168.;
- gMC->Gsvolu("ICCU", "TUBE", idtmed[213], dgh, 3);
- gMC->Gspos("ICCU", 1, "ITSV", 0., 0., 86.7, 0, "ONLY");
- gMC->Gspos("ICCU", 2, "ITSV", 0., 0., -86.7, idrotm[200], "ONLY");
+ gMC->Gsvolu("I1CC", "TUBS", idtmed[225], dgh, 5);
+ gMC->Gspos("I1CC", 1, "ITSV", 0., 0., 83.5, 0, "ONLY");
+ gMC->Gspos("I1CC", 2, "ITSV", 0., 0., -83.5, idrotm[200], "ONLY");
// --- DEFINE CABLES AT THE END OF THE ITS CONES - CARBON PART
+ // LOWER PART
- dgh[0] = 46.+1.0;
- dgh[1] = 46.+1.0+1.5;
+ dgh[0] = 46.+1.0;
+ dgh[1] = 46.+1.0+1.5;
dgh[2] = 9.5;
+ dgh[3] = 192.;
+ dgh[4] = 348.;
- gMC->Gsvolu("ICCC", "TUBE", idtmed[225], dgh, 3);
- gMC->Gspos("ICCC", 1, "ITSV", 0., 0., 86.7, 0, "ONLY");
- gMC->Gspos("ICCC", 2, "ITSV", 0., 0., -86.7, idrotm[200], "ONLY");
+ gMC->Gsvolu("I2CC", "TUBS", idtmed[225], dgh, 5);
+ gMC->Gspos("I2CC", 1, "ITSV", 0., 0., 83.5, 0, "ONLY");
+ gMC->Gspos("I2CC", 2, "ITSV", 0., 0., -83.5, idrotm[200], "ONLY");
+
+
+ // --- DEFINE PATCH PANELS AT THE END OF THE ITS CONES
+ // UPPER PART
+
+ dgh[0] = 46.;
+ dgh[1] = 56.;
+ dgh[2] = 2.25;
+ dgh[3] = 12.;
+ dgh[4] = 168.;
+
+ gMC->Gsvolu("IPA1", "TUBS", idtmed[210], dgh, 5);
+ gMC->Gspos("IPA1", 1, "ITSV", 0., 0., 95.25, 0, "ONLY");
+ gMC->Gspos("IPA1", 2, "ITSV", 0., 0., -95.25, idrotm[200], "ONLY");
// --- DEFINE PATCH PANELS AT THE END OF THE ITS CONES
+ // LOWER PART
- dgh[0] = 46.;
+ dgh[0] = 46.;
dgh[1] = 56.;
dgh[2] = 2.25;
+ dgh[3] = 192.;
+ dgh[4] = 348.;
- gMC->Gsvolu("IPAN", "TUBE", idtmed[210], dgh, 3);
- gMC->Gspos("IPAN", 1, "ITSV", 0., 0., 98.45, 0, "ONLY");
- gMC->Gspos("IPAN", 2, "ITSV", 0., 0., -98.45, idrotm[200], "ONLY");
+ gMC->Gsvolu("IPA2", "TUBS", idtmed[210], dgh, 5);
+ gMC->Gspos("IPA2", 1, "ITSV", 0., 0., 95.25, 0, "ONLY");
+ gMC->Gspos("IPA2", 2, "ITSV", 0., 0., -95.25, idrotm[200], "ONLY");
+
// --- DEFINE CABLES/COOLING BELOW THE TPC - COPPER PART - UPPER PART
- dgh[0] = (xltpc-100.7)/2.;
+ dgh[0] = (ztpc-97.5)/2.;
dgh[1] = 46.2;
dgh[2] = 46.2+1.0;
dgh[3] = 62.3;
dgh[5] = 12.;
dgh[6] = 168.;
gMC->Gsvolu("ICU1", "CONS", idtmed[213], dgh, 7);
- gMC->Gspos("ICU1", 1, "ITSV", 0., 0., 100.7+dgh[0], 0, "ONLY");
- gMC->Gspos("ICU1", 2, "ITSV", 0., 0., -(100.7+dgh[0]), idrotm[200], "ONLY");
+ gMC->Gspos("ICU1", 1, "ITSV", 0., 0., 97.5+dgh[0], 0, "ONLY");
+ gMC->Gspos("ICU1", 2, "ITSV", 0., 0., -(97.5+dgh[0]), idrotm[200], "ONLY");
// --- DEFINE CABLES/COOLING BELOW THE TPC - COPPER PART - LOWER PART
- dgh[0] = (xltpc-100.7)/2.;
+ dgh[0] = (ztpc-97.5)/2.;
dgh[1] = 46.2;
dgh[2] = 46.2+1.0;
dgh[3] = 62.3;
dgh[5] = 192.;
dgh[6] = 348.;
gMC->Gsvolu("ICU2", "CONS", idtmed[213], dgh, 7);
- gMC->Gspos("ICU2", 1, "ITSV", 0., 0., 100.7+dgh[0], 0, "ONLY");
- gMC->Gspos("ICU2", 2, "ITSV", 0., 0., -(100.7+dgh[0]), idrotm[200], "ONLY");
+ gMC->Gspos("ICU2", 1, "ITSV", 0., 0., 97.5+dgh[0], 0, "ONLY");
+ gMC->Gspos("ICU2", 2, "ITSV", 0., 0., -(97.5+dgh[0]), idrotm[200], "ONLY");
// --- DEFINE CABLES/COOLING BELOW THE TPC - CARBON PART - UPPER PART
- dgh[0] = (xltpc-100.7)/2.;
+ dgh[0] = (ztpc-97.5)/2.;
dgh[1] = 46.2+1.0;
dgh[2] = 46.2+1.0+1.5;
dgh[3] = 62.3+1.0;
dgh[5] = 12.;
dgh[6] = 168.;
gMC->Gsvolu("ICC1", "CONS", idtmed[225], dgh, 7);
- gMC->Gspos("ICC1", 1, "ITSV", 0., 0., 100.7+dgh[0], 0, "ONLY");
- gMC->Gspos("ICC1", 2, "ITSV", 0., 0., -(100.7+dgh[0]), idrotm[200], "ONLY");
+ gMC->Gspos("ICC1", 1, "ITSV", 0., 0., 97.5+dgh[0], 0, "ONLY");
+ gMC->Gspos("ICC1", 2, "ITSV", 0., 0., -(97.5+dgh[0]), idrotm[200], "ONLY");
// --- DEFINE CABLES/COOLING BELOW THE TPC - CARBON PART - LOWER PART
- dgh[0] = (xltpc-100.7)/2.;
+ dgh[0] = (ztpc-97.5)/2.;
dgh[1] = 46.2+1.0;
dgh[2] = 46.2+1.0+1.5;
dgh[3] = 62.3+1.0;
dgh[5] = 192.;
dgh[6] = 348.;
gMC->Gsvolu("ICC2", "CONS", idtmed[225], dgh, 7);
- gMC->Gspos("ICC2", 1, "ITSV", 0., 0., 100.7+dgh[0], 0, "ONLY");
- gMC->Gspos("ICC2", 2, "ITSV", 0., 0., -(100.7+dgh[0]), idrotm[200], "ONLY");
+ gMC->Gspos("ICC2", 1, "ITSV", 0., 0., 97.5+dgh[0], 0, "ONLY");
+ gMC->Gspos("ICC2", 2, "ITSV", 0., 0., -(97.5+dgh[0]), idrotm[200], "ONLY");
// --- DEFINE CABLES/COOLING BEHIND THE TPC - COPPER PART - UPPER PART
dgh[3] = 12.;
dgh[4] = 168.;
gMC->Gsvolu("ICU3", "TUBS", idtmed[213], dgh, 5);
- gMC->Gspos("ICU3", 1, "ITSV", 0., 0., xltpc+1.5+dgh[2], 0, "ONLY");
- gMC->Gspos("ICU3", 2, "ITSV", 0., 0., -(xltpc+1.5+dgh[2]), idrotm[200], "ONLY");
+ gMC->Gspos("ICU3", 1, "ITSV", 0., 0., ztpc+1.5+dgh[2], 0, "ONLY");
+ gMC->Gspos("ICU3", 2, "ITSV", 0., 0., -(ztpc+1.5+dgh[2]), idrotm[200], "ONLY");
// --- DEFINE CABLES/COOLING BEHIND THE TPC - COPPER PART - LOWER PART
dgh[3] = 192.;
dgh[4] = 348.;
gMC->Gsvolu("ICU4", "TUBS", idtmed[213], dgh, 5);
- gMC->Gspos("ICU4", 1, "ITSV", 0., 0., xltpc+1.5+dgh[2], 0, "ONLY");
- gMC->Gspos("ICU4", 2, "ITSV", 0., 0., -(xltpc+1.5+dgh[2]), idrotm[200], "ONLY");
+ gMC->Gspos("ICU4", 1, "ITSV", 0., 0., ztpc+1.5+dgh[2], 0, "ONLY");
+ gMC->Gspos("ICU4", 2, "ITSV", 0., 0., -(ztpc+1.5+dgh[2]), idrotm[200], "ONLY");
// --- DEFINE CABLES/COOLING BEHIND THE TPC - CARBON PART - UPPER PART
dgh[3] = 12.;
dgh[4] = 168.;
gMC->Gsvolu("ICC3", "TUBS", idtmed[225], dgh, 5);
- gMC->Gspos("ICC3", 1, "ITSV", 0., 0., xltpc+dgh[2], 0, "ONLY");
- gMC->Gspos("ICC3", 2, "ITSV", 0., 0., -(xltpc+dgh[2]), idrotm[200], "ONLY");
+ gMC->Gspos("ICC3", 1, "ITSV", 0., 0., ztpc+dgh[2], 0, "ONLY");
+ gMC->Gspos("ICC3", 2, "ITSV", 0., 0., -(ztpc+dgh[2]), idrotm[200], "ONLY");
// --- DEFINE CABLES/COOLING BEHIND THE TPC - CARBON PART - LOWER PART
dgh[3] = 192.;
dgh[4] = 348.;
gMC->Gsvolu("ICC4", "TUBS", idtmed[225], dgh, 5);
- gMC->Gspos("ICC4", 1, "ITSV", 0., 0., xltpc+dgh[2], 0, "ONLY");
- gMC->Gspos("ICC4", 2, "ITSV", 0., 0., -(xltpc+dgh[2]), idrotm[200], "ONLY");
+ gMC->Gspos("ICC4", 1, "ITSV", 0., 0., ztpc+dgh[2], 0, "ONLY");
+ gMC->Gspos("ICC4", 2, "ITSV", 0., 0., -(ztpc+dgh[2]), idrotm[200], "ONLY");
// --- DEFINE HOOK TO THE TPC ON OTHER SIDE W.R.T. THE ABSORBER - UPPER PART
dgh[3] = 12.;
dgh[4] = 168.;
gMC->Gsvolu("IHK1", "TUBS", idtmed[264], dgh, 5);
- gMC->Gspos("IHK1", 1, "ITSV", 0., 0., -xltpc-dgh[2], 0, "ONLY");
+ gMC->Gspos("IHK1", 1, "ITSV", 0., 0., -ztpc-dgh[2], 0, "ONLY");
// --- DEFINE HOOK TO THE TPC ON OTHER SIDE W.R.T. THE ABSORBER - LOWER PART
dgh[3] = 192.;
dgh[4] = 348.;
gMC->Gsvolu("IHK2", "TUBS", idtmed[264], dgh, 5);
- gMC->Gspos("IHK2", 1, "ITSV", 0., 0., -xltpc-dgh[2], 0, "ONLY");
+ gMC->Gspos("IHK2", 1, "ITSV", 0., 0., -ztpc-dgh[2], 0, "ONLY");
// --- DEFINE RAILS BETWEEN THE ITS AND THE TPC
- //dgh[0] = 0.85;
- //dgh[1] = 10.;
- //dgh[2] = 190.;
- //gMC->Gsvolu("IRAI", "BOX ", idtmed[285], dgh, 3);
- //gMC->Gspos("IRAI", 1, "ITSV", 53., 0., -69.5, 0, "ONLY");
- //gMC->Gspos("IRAI", 2, "ITSV", -53., 0., -69.5, 0, "ONLY");
+ if (rails == 1) {
+
+ dgh[0] = 2.;
+ dgh[1] = 8.;
+ dgh[2] = 190.;
+ gMC->Gsvolu("IRA1", "BOX ", idtmed[268], dgh, 3);
+ gMC->Gspos("IRA1", 1, "ITSV", 53.5, 0., -69.5, 0, "ONLY");
+ gMC->Gsvolu("IRA2", "BOX ", idtmed[268], dgh, 3);
+ gMC->Gspos("IRA2", 1, "ITSV", -53.5, 0., -69.5, 0, "ONLY");
+
+ dgh[0] = 2.-0.5; // 0.5 was determined in such a way that the aluminum area is 20.9 cm^2
+ dgh[1] = 8.-0.5; // 0.5 was determined in such a way that the aluminum area is 20.9 cm^2
+ dgh[2] = 190.;
+ gMC->Gsvolu("IRA3", "BOX ", idtmed[205], dgh, 3);
+ gMC->Gspos("IRA3", 1, "IRA1", 0., 0., 0., 0, "ONLY");
+ gMC->Gsvolu("IRA4", "BOX ", idtmed[205], dgh, 3);
+ gMC->Gspos("IRA4", 1, "IRA2", 0., 0., 0., 0, "ONLY");
+
+ }
// --- DEFINE CYLINDERS HOLDING RAILS BETWEEN THE ITS AND THE TPC
-
- dgh[0] = 58.;
+ dgh[0] = 56.9;
dgh[1] = 59.;
- dgh[2] = 0.6;
+ dgh[2] = 0.6;
gMC->Gsvolu("ICYL", "TUBE", idtmed[210], dgh, 3);
- gMC->Gspos("ICYL", 1, "ALIC", 0., 0., 74., 0, "ONLY");
- gMC->Gspos("ICYL", 2, "ALIC", 0., 0., -74., idrotm[200], "ONLY");
+ gMC->Gspos("ICYL", 1, "ALIC", 0., 0., 74.1, 0, "ONLY");
+ gMC->Gspos("ICYL", 2, "ALIC", 0., 0., -74.1, idrotm[200], "ONLY");
+
+ // --- DEFINE SUPPORTS FOR RAILS ATTACHED TO THE CYLINDERS
+
+ dgh[0] = 0.;
+ dgh[1] = 3.;
+ dgh[2] = 5.; // 5. comes from the fact that the volume has to be 567.6/2 cm^3
+ gMC->Gsvolu("ISR1", "TUBE", idtmed[284], dgh, 3);
+ gMC->Gspos("ISR1", 1, "ITSV", 53.4292, 10.7053, 79.75, 0, "ONLY");
+ gMC->Gspos("ISR1", 2, "ITSV", 53.4292, -10.7053, 79.75, 0, "ONLY");
+ gMC->Gspos("ISR1", 3, "ITSV", -53.4292, 10.7053, 79.75, 0, "ONLY");
+ gMC->Gspos("ISR1", 4, "ITSV", -53.4292, -10.7053, 79.75, 0, "ONLY");
+ gMC->Gspos("ISR1", 5, "ITSV", 53.4292, 10.7053, -79.75, 0, "ONLY");
+ gMC->Gspos("ISR1", 6, "ITSV", 53.4292, -10.7053, -79.75, 0, "ONLY");
+ gMC->Gspos("ISR1", 7, "ITSV", -53.4292, 10.7053, -79.75, 0, "ONLY");
+ gMC->Gspos("ISR1", 8, "ITSV", -53.4292, -10.7053, -79.75, 0, "ONLY");
+
+ // --- DEFINE SUPPORTS FOR RAILS ATTACHED TO THE ABSORBER
+
+ dgh[0] = 5.;
+ dgh[1] = 12.;
+ dgh[2] = 5.;
+ gMC->Gsvolu("ISR2", "BOX ", idtmed[210], dgh, 3);
+ gMC->Gspos("ISR2", 1, "ALIC", 53.5, 0., 125.5, 0, "ONLY");
+ gMC->Gsvolu("ISR3", "BOX ", idtmed[210], dgh, 3);
+ gMC->Gspos("ISR3", 1, "ALIC", -53.5, 0., 125.5, 0, "ONLY");
+
+ dgh[0] = 5.-2.;
+ dgh[1] = 12.-2.;
+ dgh[2] = 5.;
+ gMC->Gsvolu("ISR4", "BOX ", idtmed[205], dgh, 3);
+ gMC->Gspos("ISR4", 1, "ISR2", 0., 0., 0., 0, "ONLY");
+ gMC->Gsvolu("ISR5", "BOX ", idtmed[205], dgh, 3);
+ gMC->Gspos("ISR5", 1, "ISR3", 0., 0., 0., 0, "ONLY");
+
+ // --- DEFINE SUPPORTS TO ATTACH THE ITS TO THE TPC
+
+ dgh[0] = 0.;
+ dgh[1] = 5.;
+ dgh[2] = 2.;
+ gMC->Gsvolu("ISR6", "TUBE", idtmed[210], dgh, 3);
+ gMC->Gspos("ISR6", 1, "ALIC", 0., 54., 77., 0, "ONLY");
+ gMC->Gspos("ISR6", 2, "ALIC", 0., 54., -77., 0, "ONLY");
+ gMC->Gspos("ISR6", 3, "ALIC", 0., -54., -77., 0, "ONLY");
// --- Outputs the geometry tree in the EUCLID/CAD format
- if (fEuclidOut) {
+ if (GetEUCLID()) {
gMC->WriteEuclid("ITSgeometry", "ITSV", 1, 5);
}
}
-//_____________________________________________________________________________
-void AliITSvPPRsymm::CreateMaterials(){
-////////////////////////////////////////////////////////////////////////
- //
- // Create ITS materials
- // This function defines the default materials used in the Geant
- // Monte Carlo simulations for the geometries AliITSv1, AliITSv3,
- // AliITSvPPRsymm.
- // In general it is automatically replaced by
- // the CreatMaterials routine defined in AliITSv?. Should the function
- // CreateMaterials not exist for the geometry version you are using this
- // one is used. See the definition found in AliITSv5 or the other routine
- // for a complete definition.
- //
-
- Int_t isxfld = gAlice->Field()->Integ();
- Float_t sxmgmx = gAlice->Field()->Max();
-
- // --- Define the various materials and media for GEANT ---
-
- AliMaterial(1,"SI$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
- AliMedium(1,"SI$",1,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(2,"SPD SI CHIP$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
- AliMedium(2,"SPD SI CHIP$",2,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01, 0);
-
- AliMaterial(3,"SPD SI BUS$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
- AliMedium(3,"SPD SI BUS$",3,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(4,"C (M55J)$",0.12011E+02,0.60000E+01,0.1930E+01,0.22100E+02,0.99900E+03);
- AliMedium(4,"C (M55J)$",4,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(5,"AIR$",0.14610E+02,0.73000E+01,0.12050E-02,0.30423E+05,0.99900E+03);
- AliMedium(5,"AIR$",5,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E-02,.10000E+01,0);
-
- AliMaterial(6,"GEN AIR$",0.14610E+02,0.73000E+01,0.12050E-02,0.30423E+05,0.99900E+03);
- AliMedium(6,"GEN AIR$",6,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E-02,.10000E+01,0);
-
- AliMaterial(7,"SDD SI CHIP$",0.374952E+02,0.178184E+02,0.24485E+01,0.76931E+01,0.99900E+03);
- AliMedium(7,"SDD SI CHIP$",7,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(9,"SDD C (M55J)$",0.123565E+02,0.64561E+01,0.18097E+01,0.229570E+02,0.99900E+03);
- AliMedium(9,"SDD C (M55J)$",9,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(10,"SDD AIR$",0.14610E+02,0.73000E+01,0.12050E-02,0.30423E+05,0.99900E+03);
- AliMedium(10,"SDD AIR$",10,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E-02,.10000E+01,0);
-
- AliMaterial(11,"AL$",0.26982E+02,0.13000E+02,0.26989E+01,0.89000E+01,0.99900E+03);
- AliMedium(11,"AL$",11,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(12,"WATER$",0.14322E+02,0.72167E+01,0.10000E+01,0.35759E+02,0.94951E+02);
- AliMedium(12,"WATER$",12,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(14,"COPPER$",0.63546E+02,0.29000E+02,0.89600E+01,0.14300E+01,0.99900E+03);
- AliMedium(14,"COPPER$",14,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(15,"CERAMICS$",0.22314E+02,0.10856E+02,0.36000E+01,0.76200E+01,0.31901E+02);
- AliMedium(15,"CERAMICS$",15,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(20,"SSD C (M55J)$",0.12011E+02,0.60000E+01,0.1930E+01,0.22100E+02,0.99900E+03);
- AliMedium(20,"SSD C (M55J)$",20,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(21,"SSD AIR$",0.14610E+02,0.73000E+01,0.12050E-02,0.30423E+05,0.99900E+03);
- AliMedium(21,"SSD AIR$",21,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E-02,.10000E+01,0);
-
- AliMaterial(25,"G10FR4$",0.17749E+02,0.88750E+01,0.18000E+01,0.21822E+02,0.99900E+03);
- AliMedium(25,"G10FR4$",25,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(26,"GEN C (M55J)$",0.12011E+02,0.60000E+01,0.1930E+01,0.22100E+02,0.99900E+03);
- AliMedium(26,"GEN C (M55J)$",26,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(27,"GEN Air$",0.14610E+02,0.73000E+01,0.12050E-02,0.30423E+05,0.99900E+03);
- AliMedium(27,"GEN Air$",27,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E-02,.10000E+01,0);
-
- AliMaterial(51,"SPD SI$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
- AliMedium(51,"SPD SI$",51,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(52,"SPD SI CHIP$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
- AliMedium(52,"SPD SI CHIP$",52,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(53,"SPD SI BUS$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
- AliMedium(53,"SPD SI BUS$",53,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(54,"SPD C (M55J)$",0.12011E+02,0.60000E+01,0.1930E+01,0.22100E+02,0.99900E+03);
- AliMedium(54,"SPD C (M55J)$",54,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(55,"SPD AIR$",0.14610E+02,0.73000E+01,0.12050E-02,0.30423E+05,0.99900E+03);
- AliMedium(55,"SPD AIR$",55,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E-02,.10000E+01,0);
-
- AliMaterial(56,"SPD KAPTON(POLYCH2)$",0.14000E+02,0.71770E+01,0.13000E+01,0.31270E+02,0.99900E+03);
- AliMedium(56,"SPD KAPTON(POLYCH2)$",56,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(61,"EPOXY$",0.17749E+02,0.88750E+01,0.18000E+01,0.21822E+02,0.99900E+03);
- AliMedium(61,"EPOXY$",61,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(62,"SILICON$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
- AliMedium(62,"SILICON$",62,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(63,"KAPTONH(POLYCH2)$",0.14000E+02,0.71770E+01,0.13000E+01,0.31270E+02,0.99900E+03);
- AliMedium(63,"KAPTONH(POLYCH2)$",63,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(64,"ALUMINUM$",0.26982E+02,0.13000E+02,0.26989E+01,0.89000E+01,0.99900E+03);
- AliMedium(64,"ALUMINUM$",64,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(65,"INOX$",0.55098E+02,0.2572E+02,0.7900E+01,0.17800E+01,0.99900E+03);
- AliMedium(65,"INOX$",65,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(68,"ROHACELL$",0.12011E+02,0.60000E+01,0.9500E01,0.43600E+03,0.99900E+03);
- AliMedium(68,"ROHACELL$",68,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(69,"SDD C AL (M55J)$",0.138802E+02,0.71315E+01,0.19837E+01,0.176542E+02,0.99900E+03);
- AliMedium(69,"SDD C AL (M55J)$",69,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(70,"SDDKAPTON (POLYCH2)$",0.14000E+02,0.71770E+01,0.13000E+01,0.31270E+02,0.99900E+03);
- AliMedium(70,"SDDKAPTON (POLYCH2)$",70,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(71,"ITS SANDW A$",0.12011E+02,0.60000E+01,0.2115E+00,0.17479E+03,0.99900E+03);
- AliMedium(71,"ITS SANDW A$",71,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(72,"ITS SANDW B$",0.12011E+02,0.60000E+01,0.27000E+00,0.18956E+03,0.99900E+03);
- AliMedium(72,"ITS SANDW B$",72,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(73,"ITS SANDW C$",0.12011E+02,0.60000E+01,0.41000E+00,0.90868E+02,0.99900E+03);
- AliMedium(73,"ITS SANDW C$",73,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(74,"HEAT COND GLUE$",0.12011E+02,0.60000E+01,0.1930E+01,0.22100E+02,0.99900E+03);
- AliMedium(74,"HEAT COND GLUE$",74,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(75,"ELASTO SIL$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
- AliMedium(75,"ELASTO SIL$",75,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(76,"SPDBUS(AL+KPT+EPOX)$",0.19509E+02,0.96502E+01,0.19060E+01,0.15413E+02,0.99900E+03);
- AliMedium(76,"SPDBUS(AL+KPT+EPOX)$",76,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(77,"SDD X7R capacitors$",0.1157516E+03,0.477056E+02,0.67200E+01,0.14236E+01,0.99900E+03);
- AliMedium(77,"SDD X7R capacitors$",77,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(78,"SDD ruby sph. Al2O3$",0.218101E+02,0.106467E+02,0.39700E+01,0.48539E+01,0.99900E+03);
- AliMedium(78,"SDD ruby sph. Al2O3$",78,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(79,"SDD SI insensitive$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
- AliMedium(79,"SDD SI insensitive$",79,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(80,"SDD HV microcable$",0.159379E+02,0.78598E+01,0.16087E+01,0.217906E+02,0.99900E+03);
- AliMedium(80,"SDD HV microcable$",80,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(81,"SDD LV+signal cable$",0.223689E+02,0.108531+02,0.21035E+01,0.13440E+02,0.99900E+03);
- AliMedium(81,"SDD LV+signal cable$",81,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(82,"SDD hybrid microcab$",0.218254E+02,0.106001E+02,0.20502E+01,0.137308E+02,0.99900E+03);
- AliMedium(82,"SDD hybrid microcab$",82,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- AliMaterial(83,"SDD anode microcab$",0.186438E+02,0.91193E+01,0.17854E+01,0.176451E+02,0.99900E+03);
- AliMedium(83,"SDD anode microcab$",83,0,isxfld,sxmgmx,.10000E+01,.10000E+01,0.30000E02,.10000E+01,0);
-
- // Special media
-
- AliMaterial(90,"SPD shield$", 12.011, 6., 1.93/10. , 22.1*10., 999);
- AliMedium(90,"SPD shield$",90, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
-
- AliMaterial(91, "SPD End ladder$", 55.845, 26., 7.87/10., 1.76*10., 999);
- AliMedium(91, "SPD End ladder$",91, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
-
- AliMaterial(92, "SPD cone$",28.0855, 14., 2.33, 9.36, 999);
- AliMedium(92, "SPD cone$", 92, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
-
- AliMaterial(93, "SDD End ladder$", 69.9298, 29.8246, 0.3824, 36.5103, 999);
- AliMedium(93, "SDD End ladder$",93, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
-
- AliMaterial(94, "SDD cone$",63.546, 29., 1.15, 1.265, 999);
- AliMedium(94, "SDD cone$", 94, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
-
- AliMaterial(95, "SSD End ladder$", 32.0988, 15.4021, 0.68, 35.3238, 999);
- AliMedium(95, "SSD End ladder$",95, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
-
- AliMaterial(96, "SSD cone$",63.546, 29., 1.15, 1.265, 999);
- AliMedium(96, "SSD cone$", 96, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
-
-
-}
-//______________________________________________________________________
-void AliITSvPPRsymm::InitAliITSgeom(){
-// Based on the geometry tree defined in Geant 3.21, this
-// routine initilizes the Class AliITSgeom from the Geant 3.21 ITS geometry
-// sturture.
- if(!(dynamic_cast<TGeant3*>(gMC))) {
- Error("InitAliITSgeom",
- "Wrong Monte Carlo. InitAliITSgeom uses TGeant3 calls");
- return;
- } // end if
- cout << "Reading Geometry transformation directly from Geant 3." << endl;
- const Int_t nlayers = 6;
- const Int_t ndeep = 9;
- Int_t itsGeomTreeNames[nlayers][ndeep],lnam[20],lnum[20];
- Int_t nlad[nlayers],ndet[nlayers];
- Double_t t[3],r[10];
- Float_t par[20],att[20];
- Int_t npar,natt,idshape,imat,imed;
- AliITSGeant3Geometry *ig = new AliITSGeant3Geometry();
- Int_t mod,lay,lad,det,i,j,k;
- Char_t names[nlayers][ndeep][4];
- Int_t itsGeomTreeCopys[nlayers][ndeep];
- if(fMinorVersion == 1){ // Option A
- Char_t *namesA[nlayers][ndeep] = {
- {"ALIC","ITSV","ITSD","IT12","I12A","I10A","I103","I101","ITS1"}, // lay=1
- {"ALIC","ITSV","ITSD","IT12","I12A","I20A","I1D3","I1D1","ITS2"}, // lay=2
- {"ALIC","ITSV","ITSD","IT34","I004","I302","ITS3"," "," "}, // lay=3
- {"ALIC","ITSV","ITSD","IT34","I005","I402","ITS4"," "," "}, // lay=4
- {"ALIC","ITSV","ITSD","IT56","I565","I562","ITS5"," "," "}, // lay=5
- {"ALIC","ITSV","ITSD","IT56","I569","I566","ITS6"," "," "}};// lay=6
- Int_t itsGeomTreeCopysA[nlayers][ndeep]= {{1,1,1,1,10, 2, 4,1,1},// lay=1
- {1,1,1,1,10, 4, 4,1,1},// lay=2
- {1,1,1,1,14, 6, 1,0,0},// lay=3
- {1,1,1,1,22, 8, 1,0,0},// lay=4
- {1,1,1,1,34,22, 1,0,0},// lay=5
- {1,1,1,1,38,25, 1,0,0}};//lay=6
- for(i=0;i<nlayers;i++)for(j=0;j<ndeep;j++){
- for(k=0;k<4;k++) names[i][j][k] = namesA[i][j][k];
- itsGeomTreeCopys[i][j] = itsGeomTreeCopysA[i][j];
- } // end for i,j
- }else if(fMinorVersion == 2){ // Option B
- Char_t *namesB[nlayers][ndeep] = {
- {"ALIC","ITSV","ITSD","IT12","I12B","I10B","I107","I101","ITS1"}, // lay=1
- {"ALIC","ITSV","ITSD","IT12","I12B","I20B","I1D7","I1D1","ITS2"}, // lay=2
- {"ALIC","ITSV","ITSD","IT34","I004","I302","ITS3"," "," "}, // lay=3
- {"ALIC","ITSV","ITSD","IT34","I005","I402","ITS4"," "," "}, // lay=4
- {"ALIC","ITSV","ITSD","IT56","I565","I562","ITS5"," "," "}, // lay=5
- {"ALIC","ITSV","ITSD","IT56","I569","I566","ITS6"," "," "}};// lay=6
- Int_t itsGeomTreeCopysB[nlayers][ndeep]= {{1,1,1,1,10, 2, 4,1,1},// lay=1
- {1,1,1,1,10, 4, 4,1,1},// lay=2
- {1,1,1,1,14, 6, 1,0,0},// lay=3
- {1,1,1,1,22, 8, 1,0,0},// lay=4
- {1,1,1,1,34,22, 1,0,0},// lay=5
- {1,1,1,1,38,25, 1,0,0}};//lay=6
- for(i=0;i<nlayers;i++)for(j=0;j<ndeep;j++){
- for(k=0;k<4;k++) names[i][j][k] = namesB[i][j][k];
- itsGeomTreeCopys[i][j] = itsGeomTreeCopysB[i][j];
- } // end for i,j
- } // end if fMinorVersion
- // Sorry, but this is not very pritty code. It should be replaced
- // at some point with a version that can search through the geometry
- // tree its self.
- cout << "Reading Geometry informaton from Geant3 common blocks" << endl;
- for(i=0;i<20;i++) lnam[i] = lnum[i] = 0;
- for(i=0;i<nlayers;i++)for(j=0;j<ndeep;j++)
- itsGeomTreeNames[i][j] = ig->StringToInt(names[i][j]);
- mod = 0;
- for(i=0;i<nlayers;i++){
- k = 1;
- for(j=0;j<ndeep;j++) if(itsGeomTreeCopys[i][j]!=0)
- k *= TMath::Abs(itsGeomTreeCopys[i][j]);
- mod += k;
- } // end for i
-
- if(fITSgeom!=0) delete fITSgeom;
- nlad[0]=20;nlad[1]=40;nlad[2]=14;nlad[3]=22;nlad[4]=34;nlad[5]=38;
- ndet[0]=4;ndet[1]=4;ndet[2]=6;ndet[3]=8;ndet[4]=22;ndet[5]=25;
- fITSgeom = new AliITSgeom(0,6,nlad,ndet,mod);
- mod = -1;
- for(lay=1;lay<=nlayers;lay++){
- for(j=0;j<ndeep;j++) lnam[j] = itsGeomTreeNames[lay-1][j];
- for(j=0;j<ndeep;j++) lnum[j] = itsGeomTreeCopys[lay-1][j];
- switch (lay){
- case 1: case 2: // layers 1 and 2 are a bit special
- lad = 0;
- for(j=1;j<=itsGeomTreeCopys[lay-1][4];j++){
- lnum[4] = j;
- for(k=1;k<=itsGeomTreeCopys[lay-1][5];k++){
- lad++;
- lnum[5] = k;
- for(det=1;det<=itsGeomTreeCopys[lay-1][6];det++){
- lnum[6] = det;
- mod++;
- ig->GetGeometry(ndeep,lnam,lnum,t,r,idshape,npar,natt,
- par,att,imat,imed);
- fITSgeom->CreatMatrix(mod,lay,lad,det,kSPD,t,r);
- if(!(fITSgeom->IsShapeDefined((Int_t)kSPD)))
- fITSgeom->ReSetShape(kSPD,
- new AliITSgeomSPD425Short());
- } // end for det
- } // end for k
- } // end for j
- break;
- case 3: case 4: case 5: case 6: // layers 3-6
- lnum[6] = 1;
- for(lad=1;lad<=itsGeomTreeCopys[lay-1][4];lad++){
- lnum[4] = lad;
- for(det=1;det<=itsGeomTreeCopys[lay-1][5];det++){
- lnum[5] = det;
- mod++;
- ig->GetGeometry(7,lnam,lnum,t,r,idshape,npar,natt,
- par,att,imat,imed);
- switch (lay){
- case 3: case 4:
- fITSgeom->CreatMatrix(mod,lay,lad,det,kSDD,t,r);
- if(!(fITSgeom->IsShapeDefined(kSDD)))
- fITSgeom->ReSetShape(kSDD,new AliITSgeomSDD256());
- break;
- case 5:
- fITSgeom->CreatMatrix(mod,lay,lad,det,kSSD,t,r);
- if(!(fITSgeom->IsShapeDefined(kSSD)))
- fITSgeom->ReSetShape(kSSD,
- new AliITSgeomSSD275and75());
- break;
- case 6:
- fITSgeom->CreatMatrix(mod,lay,lad,det,kSSDp,t,r);
- if(!(fITSgeom->IsShapeDefined(kSSDp)))
- fITSgeom->ReSetShape(kSSDp,
- new AliITSgeomSSD75and275());
- break;
- } // end switch
- } // end for det
- } // end for lad
- break;
- } // end switch
- } // end for lay
- return;
-}
-//_____________________________________________________________________________
-void AliITSvPPRsymm::Init(){
-////////////////////////////////////////////////////////////////////////
-// Initialise the ITS after it has been created.
-////////////////////////////////////////////////////////////////////////
- Int_t i;
-
- cout << endl;
- for(i=0;i<26;i++) cout << "*";
- cout << " ITSvPPRsymm" << fMinorVersion << "_Init ";
- for(i=0;i<25;i++) cout << "*";cout << endl;
-//
- if(fRead[0]=='\0') strncpy(fRead,fEuclidGeomDet,60);
- if(fWrite[0]=='\0') strncpy(fWrite,fEuclidGeomDet,60);
- if(fITSgeom!=0) delete fITSgeom;
- fITSgeom = new AliITSgeom();
- if(fGeomDetIn) fITSgeom->ReadNewFile(fRead);
- if(!fGeomDetIn) this->InitAliITSgeom();
- if(fGeomDetOut) fITSgeom->WriteNewFile(fWrite);
- AliITS::Init();
-//
- for(i=0;i<72;i++) cout << "*";
- cout << endl;
-}
-//_____________________________________________________________________________
-void AliITSvPPRsymm::DrawModule(){
-////////////////////////////////////////////////////////////////////////
-// Draw a shaded view of the FMD version 9.
-////////////////////////////////////////////////////////////////////////
-
- // Set everything unseen
- gMC->Gsatt("*", "seen", -1);
- //
- // Set ALIC mother visible
- gMC->Gsatt("ALIC","SEEN",0);
- //
- // Set the volumes visible
- gMC->Gsatt("ITSD","SEEN",0);
- gMC->Gsatt("ITS1","SEEN",1);
- gMC->Gsatt("ITS2","SEEN",1);
- gMC->Gsatt("ITS3","SEEN",1);
- gMC->Gsatt("ITS4","SEEN",1);
- gMC->Gsatt("ITS5","SEEN",1);
- gMC->Gsatt("ITS6","SEEN",1);
-
- gMC->Gsatt("IPCB","SEEN",1);
- gMC->Gsatt("ICO2","SEEN",1);
- gMC->Gsatt("ICER","SEEN",0);
- gMC->Gsatt("ISI2","SEEN",0);
- gMC->Gsatt("IPLA","SEEN",0);
- gMC->Gsatt("ICO3","SEEN",0);
- gMC->Gsatt("IEPX","SEEN",0);
- gMC->Gsatt("ISI3","SEEN",1);
- gMC->Gsatt("ISUP","SEEN",0);
- gMC->Gsatt("ICHO","SEEN",0);
- gMC->Gsatt("ICMO","SEEN",0);
- gMC->Gsatt("ICMD","SEEN",0);
- gMC->Gsatt("ICCO","SEEN",1);
- gMC->Gsatt("ICCM","SEEN",0);
- gMC->Gsatt("ITMD","SEEN",0);
- gMC->Gsatt("ITTT","SEEN",1);
-
- //
- gMC->Gdopt("hide", "on");
- gMC->Gdopt("shad", "on");
- gMC->Gsatt("*", "fill", 7);
- gMC->SetClipBox(".");
- gMC->SetClipBox("*", 0, 300, -300, 300, -300, 300);
- gMC->DefaultRange();
- gMC->Gdraw("alic", 40, 30, 0, 11, 10, .07, .07);
- gMC->Gdhead(1111, "Inner Tracking System Version 1");
- gMC->Gdman(17, 6, "MAN");
-}
-//_____________________________________________________________________________
-void AliITSvPPRsymm::StepManager(){
-////////////////////////////////////////////////////////////////////////
-// Called for every step in the ITS, then calles the AliITShit class
-// creator with the information to be recoreded about that hit.
-// The value of the macro ALIITSPRINTGEOM if set to 1 will allow the
-// printing of information to a file which can be used to create a .det
-// file read in by the routine CreateGeometry(). If set to 0 or any other
-// value except 1, the default behavior, then no such file is created nor
-// it the extra variables and the like used in the printing allocated.
-////////////////////////////////////////////////////////////////////////
- Int_t copy, id;
- Int_t copy1,copy2;
- Float_t hits[8];
- Int_t vol[4];
- TLorentzVector position, momentum;
- TClonesArray &lhits = *fHits;
- //
- // Track status
- vol[3] = 0;
- if(gMC->IsTrackInside()) vol[3] += 1;
- if(gMC->IsTrackEntering()) vol[3] += 2;
- if(gMC->IsTrackExiting()) vol[3] += 4;
- if(gMC->IsTrackOut()) vol[3] += 8;
- if(gMC->IsTrackDisappeared()) vol[3] += 16;
- if(gMC->IsTrackStop()) vol[3] += 32;
- if(gMC->IsTrackAlive()) vol[3] += 64;
- //
- // Fill hit structure.
- if(!(gMC->TrackCharge())) return;
- //
- // Only entering charged tracks
- if((id = gMC->CurrentVolID(copy)) == fIdSens[0]) {
- vol[0] = 1;
- id = gMC->CurrentVolOffID(0,copy);
- //detector copy in the ladder = 1<->4 (ITS1 < I101 < I103 < I10A)
- vol[1] = copy;
- gMC->CurrentVolOffID(1,copy1);
- //ladder copy in the module = 1<->2 (I10A < I12A)
- gMC->CurrentVolOffID(2,copy2);
- //module copy in the layer = 1<->10 (I12A < IT12)
- vol[2] = copy1+(copy2-1)*2;//# of ladders in one module = 2
- } else if(id == fIdSens[1]){
- vol[0] = 2;
- id = gMC->CurrentVolOffID(0,copy);
- //detector copy in the ladder = 1<->4 (ITS2 < I1D1 < I1D3 < I20A)
- vol[1] = copy;
- gMC->CurrentVolOffID(1,copy1);
- //ladder copy in the module = 1<->4 (I20A < I12A)
- gMC->CurrentVolOffID(2,copy2);
- //module copy in the layer = 1<->10 (I12A < IT12)
- vol[2] = copy1+(copy2-1)*4;//# of ladders in one module = 4
- } else if(id == fIdSens[2]){
- vol[0] = 3;
- id = gMC->CurrentVolOffID(1,copy);
- //detector copy in the ladder = 1<->6 (ITS3 < I302 < I004)
- vol[1] = copy;
- id = gMC->CurrentVolOffID(2,copy);
- //ladder copy in the layer = 1<->14 (I004 < IT34)
- vol[2] = copy;
- } else if(id == fIdSens[3]){
- vol[0] = 4;
- id = gMC->CurrentVolOffID(1,copy);
- //detector copy in the ladder = 1<->8 (ITS4 < I402 < I005)
- vol[1] = copy;
- id = gMC->CurrentVolOffID(2,copy);
- //ladder copy in the layer = 1<->22 (I005 < IT34))
- vol[2] = copy;
- }else if(id == fIdSens[4]){
- vol[0] = 5;
- id = gMC->CurrentVolOffID(1,copy);
- //detector copy in the ladder = 1<->22 (ITS5 < I562 < I565)
- vol[1] = copy;
- id = gMC->CurrentVolOffID(2,copy);
- //ladder copy in the layer = 1<->34 (I565 < IT56)
- vol[2] = copy;
- }else if(id == fIdSens[5]){
- vol[0] = 6;
- id = gMC->CurrentVolOffID(1,copy);
- //detector copy in the ladder = 1<->25 (ITS6 < I566 < I569)
- vol[1] = copy;
- id = gMC->CurrentVolOffID(2,copy);
- //ladder copy in the layer = 1<->38 (I569 < IT56)
- vol[2] = copy;
- } else {
- return; // not an ITS volume?
- } // end if/else if (gMC->CurentVolID(copy) == fIdSens[i])
-//
- gMC->TrackPosition(position);
- gMC->TrackMomentum(momentum);
- hits[0]=position[0];
- hits[1]=position[1];
- hits[2]=position[2];
- hits[3]=momentum[0];
- hits[4]=momentum[1];
- hits[5]=momentum[2];
- hits[6]=gMC->Edep();
- hits[7]=gMC->TrackTime();
- // Fill hit structure with this new hit.
- new(lhits[fNhits++]) AliITShit(fIshunt,gAlice->CurrentTrack(),vol,hits);
-
- return;
-
-}
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff