//----------------------------------------------------------------------
-void Displayv11(const char* filename=""){
+
+#if !defined(__CINT__) || defined(__MAKECINT__)
+#include <TROOT.h>
+#include <TSystem.h>
+#include <TPolyLine.h>
+#include <TGeoVolume.h>
+#include <TGeoMedium.h>
+#include <TGeoManager.h>
+#include <TArrayD.h>
+#include <TArrow.h>
+#include <TControlBar.h>
+#include <TGeoTube.h>
+#include <TCanvas.h>
+#include <TPad.h>
+#include <TVirtualPad.h>
+#include <TView.h>
+#include "AliITSgeom.h"
+#include "AliITSInitGeometry.h"
+#include "AliITSv11GeometrySPD.h"
+#include "AliITSv11GeometrySDD.h"
+#include "AliITSv11GeometrySSD.h"
+#include "AliITSv11GeometrySupport.h"
+#endif
+
+
+static AliITSv11GeometrySPD *gspd;
+static AliITSv11GeometrySDD *gsdd;
+static AliITSv11GeometrySSD *gssd;
+static AliITSv11GeometrySupport *gsupp;
+static AliITSgeom *geom;
+
+void CreateMaterialsITS();
+
+void AliMaterial(Int_t imat, const char* name, Float_t a,
+ Float_t z, Float_t dens, Float_t radl,
+ Float_t absl);
+void AliMedium(Int_t numed, const char *name, Int_t nmat,
+ Int_t isvol, Int_t ifield, Float_t fieldm,
+ Float_t tmaxfd, Float_t stemax, Float_t deemax,
+ Float_t epsil, Float_t stmin);
+void AliMixture(Int_t kmat, const char* name, Float_t* a, Float_t* z,
+ Double_t dens, Int_t nlmat=0, Float_t* wmat=0);
+void Mixture(Int_t& kmat, const char* name, Double_t* a, Double_t* z,
+ Double_t dens, Int_t nlmat, Double_t* wmat);
+Double_t* CreateDoubleArray(Float_t* array, Int_t size);
+
+Bool_t Make2DCrossSections(TPolyLine &a0,TPolyLine &a1,
+ TPolyLine &b0,TPolyLine &b1,TPolyMarker &p);
+
+//
+//----------------------------------------------------------------------
+void Displayv11(){
// Display AliITSv11 Geometry
// Inputs:
// const char* filename output file with the display in it
gSystem->Load("libGeom");
//
if(gGeoManager) delete gGeoManager;
- mgr2 = gGeoManager = new TGeoManager("ITSGeometry",
- " ITS Simulation Geometry Manager");
+ gGeoManager = new TGeoManager("ITSGeometry",
+ " ITS Simulation Geometry Manager");
+ TGeoManager *mgr2 = gGeoManager;
+ //
+ const AliITSVersion_t kv11=(AliITSVersion_t)110;
+ const Char_t *cvsDate="$Date$";
+ const Char_t *cvsRevision="$Revision$";
+ const Int_t kLength=100;
+ Char_t vstrng[kLength];
+ AliITSInitGeometry initgeom(kv11,1);
//
TGeoMaterial *vacmat = new TGeoMaterial("Vacume",0,0,0);
TGeoMedium *vacmed = new TGeoMedium("Vacume_med",1,vacmat);
- TGeoVolume *ALIC = mgr2->MakeBox("ALIC",vacmed,100.,100.,200.);
+ TGeoVolume *ALIC = mgr2->MakeBox("ALIC",vacmed,1000.,1000.,2000.);
mgr2->SetTopVolume(ALIC);
- //
+ TGeoVolume *ITS = mgr2->MakeBox("ITSV",vacmed,990.,990.,1990.);
+ if(initgeom.WriteVersionString(vstrng,kLength,kv11,1,cvsDate,cvsRevision))
+ ITS->SetTitle(vstrng);
+ //TGeoVolumeAssembly *ITSSPD = new TGeoVolumeAssembly("ITSSPD");
+ //ITS->AddNode(ITSSPD,1);
+ ALIC->AddNode(ITS,1);
+ //
+ /*
AliITSv11 *its = new AliITSv11(0,3);
its->SetDebug(ISetits(0,-1));
its->GetSPDGeometry()->SetDebug(ISetits(0,-1));
its->GetSupGeometry()->SetDebug(ISetits(0,-1));
its->CreateMaterials();
its->CreateGeometry();
+ */
+ gspd = new AliITSv11GeometrySPD(0);
+ gsdd = new AliITSv11GeometrySDD();
+ gsupp = new AliITSv11GeometrySupport(0);
+ gssd = new AliITSv11GeometrySSD();
+ //
+ CreateMaterialsITS();
+ gspd->SPDSector(ITS,mgr2);
+ gsupp->SPDCone(ITS,mgr2);
+ gsupp->SetDebug(0);
+ gsupp->SDDCone(ITS,mgr2);
+ gsdd->Layer3(ITS);
+ gsdd->Layer4(ITS);
+ gsdd->ForwardLayer3(ITS);// in Hybrid its in IS02
+ gsdd->ForwardLayer4(ITS);// in Hybrid its in IS02
+ gssd->Layer5(ITS);
+ gssd->Layer6(ITS);
+ gssd->LadderSupportLayer5(ITS);
+ gssd->LadderSupportLayer6(ITS);
+ gssd->EndCapSupportSystemLayer6(ITS);
+ gssd->EndCapSupportSystemLayer5(ITS);
+ gsupp->SSDCone(ITS,mgr2);
+ gsupp->ServicesCableSupport(ITS);
//
mgr2->CloseGeometry();
//
+ geom = new AliITSgeom();
+ initgeom.InitAliITSgeom(geom);
+ //
TControlBar *bar=new TControlBar("vertical","ITS Geometry Display",10,10);
bar->AddButton("Set Clipping on","ISetits(2,1)","Clipping on");
bar->AddButton("Set Cllipping off","ISetits(2,0)","Clipping off");
bar->AddButton("Set RayTrace off","ISetits(5,0)","Perspective off");
bar->AddButton("Set circle/80","ISetits(1,80)","circles ~ by 80 lines");
bar->AddButton("Display Geometry","Displayit()","Run Displayit");
- bar->AddButton("Display SPD Ceneral Volume","EngineeringSPDLayer()",
- "Run EngineeringSPDLayer");
- bar->AddButton("Display SPD Thermal Sheald","EngineeringSPDThS()",
+ bar->AddButton("Display SPD Sector Volume","EngineeringSPDSector()",
+ "Run EngineeringSPDSector");
+ bar->AddButton("Print SPD Sector Volume data xfig","PrintSPDSectorData()",
+ "Run PrintSPDSectorData");
+ bar->AddButton("Display SPD General Volume","EngineeringSPDCenter()",
+ "Run EngineeringSPDCenter");
+ bar->AddButton("Display SPD Thermal Shield","EngineeringSPDThS()",
"Run EngineeringSPDThS");
+ bar->AddButton("Display SPD Sector Cross Sections","EngineeringSPDSCS()",
+ "Run EngineeringSPDSCS");
bar->AddButton("Display SDD Layer 3","EngineeringSDDLayer3()",
"Run EngineeringSDDLayer3");
bar->AddButton("Display SDD Layer 4","EngineeringSDDLayer4()",
"Run EngineeringSDDLayer4");
bar->AddButton("Display SDD Cone","EngineeringSDDCone()",
"Run EngineeringSDDCone");
- bar->AddButton("Display SDD Centeral Cylinder","EngineeringSDDCylinder()",
+ bar->AddButton("Display SDD Central Cylinder","EngineeringSDDCylinder()",
"Run EngineeringSDDCylinder");
+ bar->AddButton("Display SSD Layer 5","EngineeringSSDLayer5()",
+ "Run EngineeringSSDLayer5");
+ bar->AddButton("Display SSD Layer 6","EngineeringSSDLayer6()",
+ "Run EngineeringSSDLayer6");
bar->AddButton("Display SSD Cone","EngineeringSSDCone()",
"Run EngineeringSSDCone");
- bar->AddButton("Display SSD Centeral Cylinder","EngineeringSSDCylinder()",
+ bar->AddButton("Display SSD Central Cylinder","EngineeringSSDCylinder()",
"Run EngineeringSSDCylinder");
- bar->AddButton("Display SUP RB24 side","EngineeringSupRB24()",
- "Run EngineeringSupRB24");
- bar->AddButton("Display Cable Trays RB24 side","EngineeringSupTrayRB24()",
- "Run EngineeringSupTrayRB24");
- bar->AddButton("Display SUP RB26 side","EngineeringSupRB26()",
- "Run EngineeringSupRB26");
+// bar->AddButton("Display SUP RB24 side","EngineeringSupRB24()",
+// "Run EngineeringSupRB24");
+// bar->AddButton("Display Cable Trays RB24 side","EngineeringSupTrayRB24()",
+// "Run EngineeringSupTrayRB24");
+// bar->AddButton("Display SUP RB26 side","EngineeringSupRB26()",
+// "Run EngineeringSupRB26");
+ bar->AddButton("Save Geometry to File","ExportToFile()",
+ "Run ExportToFile");
bar->AddButton("Quit/Exit",".q","Exit");
bar->Show();
gROOT->SaveContext();
//Displayit();
}
//----------------------------------------------------------------------
+void ExportToFile(){
+ // Quirry file name and write geometry to a root file.
+ // Inputs:
+ // const char* filename output file with the display in it
+ // Outputs:
+ // none.
+ // Retrurn:
+ // none.
+ Char_t filename[100];
+
+ printf("Enter File name:");
+ scanf("%s",filename);
+
+ gGeoManager->Export(filename);
+}
+//----------------------------------------------------------------------
Int_t ISetits(Int_t t,Int_t v){
static Int_t itsdebug=1,nsegments=80,cut=0,axis=1,perspective=0,ray=0;
//----------------------------------------------------------------------
Double_t DSetits(Int_t t,Double_t v){
static Double_t phimincut=0.0,phimaxcut=180.0;
- static Double_t longitude=90.0,latitude=0.0,psi=0.0;
+ static Double_t longitude=90.0,latitude=0.0;
switch (t) {
case 0:
TCanvas *c1;
if(!(c1 = (TCanvas*)gROOT->FindObject("C1")))
c1 = new TCanvas("C1","ITS Simulation Geometry",900,900);
- c1->Divide(2,2);
+ //c1->Divide(2,2);
//
mgr2->SetNsegments(ISetits(1,-1));
//
//
c1->cd(1);
ALIC->Draw();
- TPad *p1 = c1->GetPad(1);
+ TPad *p1 = (TPad*)c1->GetPad(1);
TView *view1 = p1->GetView();
if(view1){
view1->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
if(irr) cout <<"error="<<irr<<endl;
- if(ISetits(4,-1)==0) view1->SetParralel();
+ if(ISetits(4,-1)==0) view1->SetParallel();
else view1->SetPerspective();
view1->Front();
if(ISetits(3,-1)!=0) view1->ShowAxis();
} // end if view1
if(ISetits(5,-1)==1) ALIC->Raytrace();
- c1->cd(2);
+ /*c1->cd(2);
ALIC->Draw();
TPad *p2 = c1->GetPad(2);
TView *view2 = p2->GetView();
if(view2){
view2->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
if(irr) cout <<"error="<<irr<<endl;
- if(ISetits(4,-1)==0) view2->SetParralel();
+ if(ISetits(4,-1)==0) view2->SetParallel();
else view2->SetPerspective();
view2->RotateView(60.,30.);
if(ISetits(3,-1)!=0) view2->ShowAxis();
if(view3){
view3->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
if(irr) cout <<"error="<<irr<<endl;
- if(ISetits(4,-1)==0) view3->SetParralel();
+ if(ISetits(4,-1)==0) view3->SetParallel();
else view3->SetPerspective();
view3->Top();
if(ISetits(3,-1)!=0) view3->ShowAxis();
if(view4){
view4->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
if(irr) cout <<"error="<<irr<<endl;
- if(ISetits(4,-1)==0) view4->SetParralel();
+ if(ISetits(4,-1)==0) view4->SetParallel();
else view4->SetPerspective();
view4->Side();
if(ISetits(3,-1)!=0) view4->ShowAxis();
} // end if view4
if(ISetits(5,-1)==1) ALIC->Raytrace();
- //
+ *///
}
//----------------------------------------------------------------------
-void EngineeringSPDLayer(){
- // Display SPD Layer Geometry
+void EngineeringSPDSCS(){
+ // Display SPD Carbon Fiber Sector Cross sections A and B
+ // Inputs:
+ // none.
+ // Outputs:
+ // none.
+ // Return:
+ // none.
+ TPolyLine *a0,*a1,*b0,*b1;
+ TPolyMarker *p;
+ TCanvas *cSPDSCS=0;
+ Int_t i;
+ Double_t max=0.0;
+
+ a0 = new TPolyLine();
+ a1 = new TPolyLine();
+ b0 = new TPolyLine();
+ b1 = new TPolyLine();
+ p = new TPolyMarker();
+ a0->SetLineColor(1);
+ a1->SetLineColor(4);
+ b0->SetLineColor(3);
+ b0->SetLineStyle(2); // dashed
+ b1->SetLineColor(6);
+ b1->SetLineStyle(2); // dashed
+ p->SetMarkerColor(2);
+ p->SetMarkerStyle(5);
+ if(gspd==0||Make2DCrossSections(*a0,*a1,*b0,*b1,*p)==kFALSE)return;
+ for(i=0;i<a0->GetN();i++) {
+ if(TMath::Abs(a0->GetX()[i])>max) max = TMath::Abs(a0->GetX()[i]);
+ if(TMath::Abs(a0->GetY()[i])>max) max = TMath::Abs(a0->GetY()[i]);
+ } // end for i
+ for(i=0;i<a1->GetN();i++) {
+ if(TMath::Abs(a1->GetX()[i])>max) max = TMath::Abs(a0->GetX()[i]);
+ if(TMath::Abs(a1->GetY()[i])>max) max = TMath::Abs(a1->GetY()[i]);
+ } // end for i
+ for(i=0;i<b0->GetN();i++) {
+ if(TMath::Abs(b0->GetX()[i])>max) max = TMath::Abs(b0->GetX()[i]);
+ if(TMath::Abs(b0->GetY()[i])>max) max = TMath::Abs(b0->GetY()[i]);
+ } // end for i
+ for(i=0;i<b1->GetN();i++) {
+ if(TMath::Abs(b1->GetX()[i])>max) max = TMath::Abs(b1->GetX()[i]);
+ if(TMath::Abs(b1->GetY()[i])>max) max = TMath::Abs(b1->GetY()[i]);
+ } // end for i
+ max *= 1.05;
+ cSPDSCS = (TCanvas*)gROOT->FindObject("cSPDSCS");
+ if(cSPDSCS==0) delete cSPDSCS;
+ cSPDSCS = new TCanvas("cSPDSCS","SPD Carbon Fiber Sector Cross sections",2);
+ cSPDSCS->Range(-max,-max,max,max);
+ //cSPDSCS->RangeAxis();
+ cSPDSCS->SetFixedAspectRatio(kTRUE);
+ //
+ a0->Draw("");
+ a1->Draw("same");
+ p->Draw("same");
+ b0->Draw("same");
+ b1->Draw("same");
+ cSPDSCS->Update();
+ return;
+}
+//----------------------------------------------------------------------
+void EngineeringSPDSector(){
+ // Display SPD Sector Geometry
// Inputs:
// none.
// Outputs:
//
TGeoManager *mgr2 = gGeoManager;
TGeoVolume *ALIC = mgr2->GetTopVolume();
- TCanvas *c4;
+ TCanvas *c4=0, *c5=0;
if(!(c4 = (TCanvas*)gROOT->FindObject("C4")))
c4 = new TCanvas("C4","ITS SPD Layer Geometry Side View",500,500);
- TGeoVolume *ITS,*SPDLay=0;
- TGeoNode *node;
- TArrow *arrow=new TArrow();
+ TGeoVolume *ITS=0,*ITSSPD=0,*SPDLay=0;
+ TGeoNode *node=0;
//
node = ALIC->FindNode("ITSV_1");
ITS = node->GetVolume();
- node = ITS->FindNode("ITSSPDTempSPDMotherVolume_1");
+ node = ITS->FindNode("ITSSPD_1");
+ ITSSPD = node->GetVolume();
+ node = ITSSPD->FindNode("ITSSPDCarbonFiberSectorV_1");
+ if(node==0)Error("EngineeringSPDSector","could not find node %s",
+ "ITSSPDCarbonFiberSectorV_1");
SPDLay = node->GetVolume();
+ if(SPDLay==0)Error("EngineeringSPDSector","could not find volume SPDLay");
//
mgr2->SetNsegments(ISetits(1,-1));
//
if(view1){
view1->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
if(irr) cout <<"error="<<irr<<endl;
- if(ISetits(4,-1)==0) view1->SetParralel();
+ if(ISetits(4,-1)==0) view1->SetParallel();
else view1->SetPerspective();
view1->Front();
if(ISetits(3,-1)!=0) view1->ShowAxis();
if(ISetits(5,-1)==1) SPDLay->Raytrace();
//
if(!(c5 = (TCanvas*)gROOT->FindObject("C5")))
- c5 = new TCanvas("C5","ITS SPD Layer Geometry End View",500,500);
+ c5 = new TCanvas("C5","ITS SPD Sector Geometry End View",500,500);
SPDLay->Draw();
TView *view2 = c5->GetView();
if(view2){
view2->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
if(irr) cout <<"error="<<irr<<endl;
- if(ISetits(4,-1)==0) view2->SetParralel();
+ if(ISetits(4,-1)==0) view2->SetParallel();
else view2->SetPerspective();
view2->Top();
if(ISetits(3,-1)!=0) view2->ShowAxis();
//
}
//----------------------------------------------------------------------
+void PrintSPDSectorData(){
+ // Print SPD Sector Data
+ // Inputs:
+ // none.
+ // Outputs:
+ // none.
+ // Retrurn:
+ // none.
+ Int_t irr,i;
+ //
+ TGeoManager *mgr2 = gGeoManager;
+ TGeoXtru * sA0;
+ TGeoVolume *vA0=0;
+
+ //mgr2->PushPath();
+ //mgr2->cd("ITSSPDCarbonFiberSupportSectorA0_1");
+ vA0 = mgr2->FindVolumeFast("ITSSPDCarbonFiberSupportSectorA0");
+ sA0 = (TGeoXtru*) vA0->GetShape();
+ irr = sA0->GetNvert();
+ Double_t x,y;
+ cout <<endl;
+ cout <<"2 3 0 1 0 7 50 -1 -1 0.000 0 0 -1 0 0 "<<irr;
+ for(i=0;i<irr;i++){
+ x = sA0->GetX(i)+2.5;
+ y = sA0->GetY(i)+2.5;
+ if(!(i%6)) { cout << endl; cout <<" ";}
+ cout<<" "<<TMath::Nint(x*450.)<<" "<<TMath::Nint(y*450);
+ //cout<<" "<<x<<" "<<y;
+ } // end for i
+ x = sA0->GetX(0)+2.5;
+ y = sA0->GetY(0)+2.5;
+ if(!(i%6)) { cout << endl; cout <<" ";}
+ cout<<" "<<TMath::Nint(x*450.)<<" "<<TMath::Nint(y*450);
+ //cout<<" "<<x<<" "<<y;
+ cout << endl;
+ //
+}
+//----------------------------------------------------------------------
+void EngineeringSPDCenter(){
+ // Display SPD Centeral Geometry
+ // Inputs:
+ // none.
+ // Outputs:
+ // none.
+ // Retrurn:
+ // none.
+ Int_t irr;
+ //
+ TGeoManager *mgr2 = gGeoManager;
+ TGeoVolume *ALIC = mgr2->GetTopVolume();
+ TCanvas *c4=0, *c5=0;
+ if(!(c4 = (TCanvas*)gROOT->FindObject("C4")))
+ c4 = new TCanvas("C4","ITS SPD Layer Geometry Side View",500,500);
+ TGeoVolume *ITS,*ITSSPD,*SPDLay=0;
+ TGeoNode *node;
+ //
+ node = ALIC->FindNode("ITSV_1");
+ ITS = node->GetVolume();
+ node = ITS->FindNode("ITSSPD_1");
+ ITSSPD = node->GetVolume();
+ //
+ mgr2->SetNsegments(ISetits(1,-1));
+ //
+ mgr2->SetVisLevel(6);
+ mgr2->SetVisOption(0);
+ //mgr2->CheckOverlaps(0.01);
+ //mgr2->PrintOverlaps();
+ if(ISetits(2,-1)==1){
+ TGeoShape *clip = new TGeoTubeSeg(0, 1000, 2000, 45, 90);
+ mgr2->SetClippingShape(clip);
+ } // end if
+ mgr2->SetPhiRange(DSetits(1,-1.),DSetits(0,-1.));
+ if(ISetits(2,-1)!=0) mgr2->SetPhiRange(DSetits(1,-1.),DSetits(0,-1.));
+ //
+ ITSSPD->Draw();
+ TView *view1 = c4->GetView();
+ if(view1){
+ view1->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
+ if(irr) cout <<"error="<<irr<<endl;
+ if(ISetits(4,-1)==0) view1->SetParallel();
+ else view1->SetPerspective();
+ view1->Front();
+ if(ISetits(3,-1)!=0) view1->ShowAxis();
+ } // end if view1
+ if(ISetits(5,-1)==1) SPDLay->Raytrace();
+ //
+ if(!(c5 = (TCanvas*)gROOT->FindObject("C5")))
+ c5 = new TCanvas("C5","ITS SPD Centeral Geometry End View",500,500);
+ ITSSPD->Draw();
+ TView *view2 = c5->GetView();
+ if(view2){
+ view2->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
+ if(irr) cout <<"error="<<irr<<endl;
+ if(ISetits(4,-1)==0) view2->SetParallel();
+ else view2->SetPerspective();
+ view2->Top();
+ if(ISetits(3,-1)!=0) view2->ShowAxis();
+ } // end if view2
+ if(ISetits(5,-1)==1) ITSSPD->Raytrace();
+ //
+}
+//----------------------------------------------------------------------
void EngineeringSPDThS(){
- // Display SPD Thermal Sheald Geometry
+ // Display SPD Thermal Shield Geometry
// Inputs:
// none.
// Outputs:
c4->Divide(2,1);
TGeoVolume *ITS,*SPDThS=0;
TGeoNode *node;
- TArrow *arrow=new TArrow();
//
node = ALIC->FindNode("ITSV_1");
ITS = node->GetVolume();
- node = ITS->FindNode("ITSspdThermalShealdMotherM_1");
+ node = ITS->FindNode("ITSspdThermalShield_1");
SPDThS = node->GetVolume();
//
mgr2->SetNsegments(ISetits(1,-1));
//
c4->cd(1);
SPDThS->Draw();
- TPad *p1 = c4->GetPad(1);
+ TPad *p1 = (TPad*)c4->GetPad(1);
TView *view1 = p1->GetView();
if(view1){
view1->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
if(irr) cout <<"error="<<irr<<endl;
- if(ISetits(4,-1)==0) view1->SetParralel();
+ if(ISetits(4,-1)==0) view1->SetParallel();
else view1->SetPerspective();
view1->Front();
if(ISetits(3,-1)!=0) view1->ShowAxis();
//
c4->cd(2);
SPDThS->Draw();
- TPad *p2 = c4->GetPad(2);
+ TPad *p2 = (TPad*)c4->GetPad(2);
TView *view2 = p2->GetView();
if(view2){
view2->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
if(irr) cout <<"error="<<irr<<endl;
- if(ISetits(4,-1)==0) view2->SetParralel();
+ if(ISetits(4,-1)==0) view2->SetParallel();
else view2->SetPerspective();
view2->Top();
if(ISetits(3,-1)!=0) view2->ShowAxis();
//
TGeoManager *mgr2 = gGeoManager;
TGeoVolume *ALIC = mgr2->GetTopVolume();
- TCanvas *c4;
+ TCanvas *c4=0, *c5=0;
if(!(c4 = (TCanvas*)gROOT->FindObject("C4")))
c4 = new TCanvas("C4","ITS SDD Layer 3 Geometry Side View",500,500);
TGeoVolume *ITS,*SDDLay3=0;
TGeoNode *node;
- TArrow *arrow=new TArrow();
//
node = ALIC->FindNode("ITSV_1");
ITS = node->GetVolume();
if(view1){
view1->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
if(irr) cout <<"error="<<irr<<endl;
- if(ISetits(4,-1)==0) view1->SetParralel();
+ if(ISetits(4,-1)==0) view1->SetParallel();
else view1->SetPerspective();
view1->Front();
if(ISetits(3,-1)!=0) view1->ShowAxis();
if(view2){
view2->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
if(irr) cout <<"error="<<irr<<endl;
- if(ISetits(4,-1)==0) view2->SetParralel();
+ if(ISetits(4,-1)==0) view2->SetParallel();
else view2->SetPerspective();
view2->Top();
if(ISetits(3,-1)!=0) view2->ShowAxis();
//
TGeoManager *mgr2 = gGeoManager;
TGeoVolume *ALIC = mgr2->GetTopVolume();
- TCanvas *c4;
+ TCanvas *c4=0, *c5=0;
if(!(c4 = (TCanvas*)gROOT->FindObject("C4")))
c4 = new TCanvas("C4","ITS SDD Layer 4 Geometry Side View",500,500);
TGeoVolume *ITS,*SDDLay4=0;
TGeoNode *node;
- TArrow *arrow=new TArrow();
//
node = ALIC->FindNode("ITSV_1");
ITS = node->GetVolume();
if(view1){
view1->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
if(irr) cout <<"error="<<irr<<endl;
- if(ISetits(4,-1)==0) view1->SetParralel();
+ if(ISetits(4,-1)==0) view1->SetParallel();
else view1->SetPerspective();
view1->Front();
if(ISetits(3,-1)!=0) view1->ShowAxis();
if(view2){
view2->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
if(irr) cout <<"error="<<irr<<endl;
- if(ISetits(4,-1)==0) view2->SetParralel();
+ if(ISetits(4,-1)==0) view2->SetParallel();
else view2->SetPerspective();
view2->Top();
if(ISetits(3,-1)!=0) view2->ShowAxis();
//
TGeoManager *mgr2 = gGeoManager;
TGeoVolume *ALIC = mgr2->GetTopVolume();
- TCanvas *c2;
+ TCanvas *c2=0;
if(!(c2 = (TCanvas*)gROOT->FindObject("C2")))
c2 = new TCanvas("C2","ITS SDD Cone Geometry",900,450);
c2->Divide(2,1);
//
node = ALIC->FindNode("ITSV_1");
ITS = node->GetVolume();
- node = ITS->FindNode("ITSsddConeL_1");
+ node = ITS->FindNode("SDDCarbonFiberCone_1");
SDD = node->GetVolume();
//
mgr2->SetNsegments(ISetits(1,-1));
//
c2->cd(1);
SDD->Draw();
- TPad *p1 = c2->GetPad(1);
+ TPad *p1 = (TPad*)c2->GetPad(1);
TView *view1 = p1->GetView();
if(view1){
view1->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
if(irr) cout <<"error="<<irr<<endl;
- if(ISetits(4,-1)==0) view1->SetParralel();
+ if(ISetits(4,-1)==0) view1->SetParallel();
else view1->SetPerspective();
view1->Front();
if(ISetits(3,-1)!=0) view1->ShowAxis();
//
c2->cd(2);
SDD->Draw();
- TPad *p2 = c2->GetPad(2);
+ TPad *p2 = (TPad*)c2->GetPad(2);
TView *view2 = p2->GetView();
if(view2){
view2->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
if(irr) cout <<"error="<<irr<<endl;
- if(ISetits(4,-1)==0) view2->SetParralel();
+ if(ISetits(4,-1)==0) view2->SetParallel();
else view2->SetPerspective();
view2->Top();
if(ISetits(3,-1)!=0) view2->ShowAxis();
//
TGeoManager *mgr2 = gGeoManager;
TGeoVolume *ALIC = mgr2->GetTopVolume();
- TCanvas *c3;
+ TCanvas *c3=0;
if(!(c3 = (TCanvas*)gROOT->FindObject("C3")))
c3 = new TCanvas("C3","ITS SDD Cylinder Geometry",900,450);
c3->Divide(2,1);
TGeoVolume *ITS,*SDD=0;
TGeoNode *node;
- TArrow *arrow=new TArrow();
+// TArrow *arrow=new TArrow();
//
node = ALIC->FindNode("ITSV_1");
ITS = node->GetVolume();
- node = ITS->FindNode("ITSsddCentCylCF_1");
+ node = ITS->FindNode("SDDCarbonFiberCylinder_1");
SDD = node->GetVolume();
- Double_t Rmin = ((TGeoTube*)(SDD->GetShape()))->GetRmin();
- Double_t Rmax = ((TGeoTube*)(SDD->GetShape()))->GetRmax();
- Double_t Dz = ((TGeoTube*)(SDD->GetShape()))->GetDz();
+// Double_t Rmin = ((TGeoTube*)(SDD->GetShape()))->GetRmin();
+// Double_t Rmax = ((TGeoTube*)(SDD->GetShape()))->GetRmax();
+// Double_t Dz = ((TGeoTube*)(SDD->GetShape()))->GetDz();
//
mgr2->SetNsegments(ISetits(1,-1));
//
//
c3->cd(1);
SDD->Draw();
- TPad *p1 = c3->GetPad(1);
+ TPad *p1 = (TPad*)c3->GetPad(1);
TView *view1 = p1->GetView();
if(view1){
view1->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
if(irr) cout <<"error="<<irr<<endl;
- if(ISetits(4,-1)==0) view1->SetParralel();
+ if(ISetits(4,-1)==0) view1->SetParallel();
else view1->SetPerspective();
view1->Front();
if(ISetits(3,-1)!=0) view1->ShowAxis();
//
c3->cd(2);
SDD->Draw();
- TPad *p2 = c3->GetPad(2);
+ TPad *p2 = (TPad*)c3->GetPad(2);
TView *view2 = p2->GetView();
if(view2){
view2->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
if(irr) cout <<"error="<<irr<<endl;
- if(ISetits(4,-1)==0) view2->SetParralel();
+ if(ISetits(4,-1)==0) view2->SetParallel();
else view2->SetPerspective();
view2->Top();
if(ISetits(3,-1)!=0) view2->ShowAxis();
//
}
//----------------------------------------------------------------------
+void EngineeringSSDLayer5(){
+ // Display SSD Layer 5 Geometry
+ // Inputs:
+ // none.
+ // Outputs:
+ // none.
+ // Retrurn:
+ // none.
+ Int_t irr;
+ //
+ TGeoManager *mgr2 = gGeoManager;
+ TGeoVolume *ALIC = mgr2->GetTopVolume();
+ TCanvas *c4=0, *c5=0;
+ if(!(c4 = (TCanvas*)gROOT->FindObject("C4")))
+ c4 = new TCanvas("C4","ITS SDD Layer 5 Geometry Side View",500,500);
+ TGeoVolume *ITS,*SDDLay5=0;
+ TGeoNode *node;
+ //
+ node = ALIC->FindNode("ITSV_1");
+ ITS = node->GetVolume();
+ node = ITS->FindNode("ITSssdLayer5_1");
+ SDDLay5 = node->GetVolume();
+ //
+ mgr2->SetNsegments(ISetits(1,-1));
+ //
+ mgr2->SetVisLevel(6);
+ mgr2->SetVisOption(0);
+ //mgr2->CheckOverlaps(0.01);
+ //mgr2->PrintOverlaps();
+ if(ISetits(2,-1)==1){
+ TGeoShape *clip = new TGeoTubeSeg(0, 1000, 2000, 45, 90);
+ mgr2->SetClippingShape(clip);
+ } // end if
+ mgr2->SetPhiRange(DSetits(1,-1.),DSetits(0,-1.));
+ if(ISetits(2,-1)!=0) mgr2->SetPhiRange(DSetits(1,-1.),DSetits(0,-1.));
+ //
+ SDDLay5->Draw();
+ TView *view1 = c4->GetView();
+ if(view1){
+ view1->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
+ if(irr) cout <<"error="<<irr<<endl;
+ if(ISetits(4,-1)==0) view1->SetParallel();
+ else view1->SetPerspective();
+ view1->Front();
+ if(ISetits(3,-1)!=0) view1->ShowAxis();
+ } // end if view1
+ if(ISetits(5,-1)==1) SDDLay5->Raytrace();
+ //
+ if(!(c5 = (TCanvas*)gROOT->FindObject("C5")))
+ c5 = new TCanvas("C5","ITS SDD Layer 5 Geometry End View",500,500);
+ SDDLay5->Draw();
+ TView *view2 = c5->GetView();
+ if(view2){
+ view2->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
+ if(irr) cout <<"error="<<irr<<endl;
+ if(ISetits(4,-1)==0) view2->SetParallel();
+ else view2->SetPerspective();
+ view2->Top();
+ if(ISetits(3,-1)!=0) view2->ShowAxis();
+ } // end if view2
+ if(ISetits(5,-1)==1) SDDLay5->Raytrace();
+ //
+}
+//----------------------------------------------------------------------
+void EngineeringSSDLayer6(){
+ // Display SSD Layer 6 Geometry
+ // Inputs:
+ // none.
+ // Outputs:
+ // none.
+ // Retrurn:
+ // none.
+ Int_t irr;
+ //
+ TGeoManager *mgr2 = gGeoManager;
+ TGeoVolume *ALIC = mgr2->GetTopVolume();
+ TCanvas *c4=0, *c5=0;
+ if(!(c4 = (TCanvas*)gROOT->FindObject("C4")))
+ c4 = new TCanvas("C4","ITS SDD Layer 6 Geometry Side View",500,500);
+ TGeoVolume *ITS,*SDDLay6=0;
+ TGeoNode *node;
+ //
+ node = ALIC->FindNode("ITSV_1");
+ ITS = node->GetVolume();
+ node = ITS->FindNode("ITSssdLayer6_1");
+ SDDLay6 = node->GetVolume();
+ //
+ mgr2->SetNsegments(ISetits(1,-1));
+ //
+ mgr2->SetVisLevel(6);
+ mgr2->SetVisOption(0);
+ //mgr2->CheckOverlaps(0.01);
+ //mgr2->PrintOverlaps();
+ if(ISetits(2,-1)==1){
+ TGeoShape *clip = new TGeoTubeSeg(0, 1000, 2000, 45, 90);
+ mgr2->SetClippingShape(clip);
+ } // end if
+ mgr2->SetPhiRange(DSetits(1,-1.),DSetits(0,-1.));
+ if(ISetits(2,-1)!=0) mgr2->SetPhiRange(DSetits(1,-1.),DSetits(0,-1.));
+ //
+ SDDLay6->Draw();
+ TView *view1 = c4->GetView();
+ if(view1){
+ view1->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
+ if(irr) cout <<"error="<<irr<<endl;
+ if(ISetits(4,-1)==0) view1->SetParallel();
+ else view1->SetPerspective();
+ view1->Front();
+ if(ISetits(3,-1)!=0) view1->ShowAxis();
+ } // end if view1
+ if(ISetits(5,-1)==1) SDDLay6->Raytrace();
+ //
+ if(!(c5 = (TCanvas*)gROOT->FindObject("C5")))
+ c5 = new TCanvas("C5","ITS SDD Layer 6 Geometry End View",500,500);
+ SDDLay6->Draw();
+ TView *view2 = c5->GetView();
+ if(view2){
+ view2->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
+ if(irr) cout <<"error="<<irr<<endl;
+ if(ISetits(4,-1)==0) view2->SetParallel();
+ else view2->SetPerspective();
+ view2->Top();
+ if(ISetits(3,-1)!=0) view2->ShowAxis();
+ } // end if view2
+ if(ISetits(5,-1)==1) SDDLay6->Raytrace();
+ //
+}
+//----------------------------------------------------------------------
void EngineeringSSDCone(){
// Display SSD Cone Geometry
// Inputs:
//
TGeoManager *mgr2 = gGeoManager;
TGeoVolume *ALIC = mgr2->GetTopVolume();
- TCanvas *c2;
+ TCanvas *c2=0;
if(!(c2 = (TCanvas*)gROOT->FindObject("C2")))
c2 = new TCanvas("C2","ITS SSD Cone Geometry",900,450);
c2->Divide(2,1);
//
node = ALIC->FindNode("ITSV_1");
ITS = node->GetVolume();
- node = ITS->FindNode("ITSssdConeA_1");
+ node = ITS->FindNode("ITSssdCone_1");
SSD = node->GetVolume();
//
mgr2->SetNsegments(ISetits(1,-1));
//
c2->cd(1);
SSD->Draw();
- TPad *p1 = c2->GetPad(1);
+ TPad *p1 = (TPad*)c2->GetPad(1);
TView *view1 = p1->GetView();
if(view1){
view1->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
if(irr) cout <<"error="<<irr<<endl;
- if(ISetits(4,-1)==0) view1->SetParralel();
+ if(ISetits(4,-1)==0) view1->SetParallel();
else view1->SetPerspective();
view1->Top();
if(ISetits(3,-1)!=0) view1->ShowAxis();
//
c2->cd(2);
SSD->Draw();
- TPad *p2 = c2->GetPad(2);
+ TPad *p2 = (TPad*)c2->GetPad(2);
TView *view2 = p2->GetView();
if(view2){
view2->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
if(irr) cout <<"error="<<irr<<endl;
- if(ISetits(4,-1)==0) view2->SetParralel();
+ if(ISetits(4,-1)==0) view2->SetParallel();
else view2->SetPerspective();
view2->Front();
if(ISetits(3,-1)!=0) view2->ShowAxis();
//
TGeoManager *mgr2 = gGeoManager;
TGeoVolume *ALIC = mgr2->GetTopVolume();
- TCanvas *c3;
+ TCanvas *c3=0;
if(!(c3 = (TCanvas*)gROOT->FindObject("C3")))
c3 = new TCanvas("C3","ITS SSD Cylinder Geometry",900,450);
c3->Divide(2,1);
TGeoVolume *ITS,*SSD=0;
TGeoNode *node;
- TArrow *arrow=new TArrow();
+// TArrow *arrow=new TArrow();
//
node = ALIC->FindNode("ITSV_1");
ITS = node->GetVolume();
- node = ITS->FindNode("ITSssdCentCylCA_1");
+ node = ITS->FindNode("SSDexternalcylinder_1");
SSD = node->GetVolume();
//Double_t Rmin = ((TGeoPcon*)(SSD->GetShape()))->GetRmin();
//Double_t Rmax = ((TGeoPcon*)(SSD->GetShape()))->GetRmax();
//
c3->cd(1);
SSD->Draw();
- TPad *p1 = c3->GetPad(1);
+ TPad *p1 = (TPad*)c3->GetPad(1);
TView *view1 = p1->GetView();
if(view1){
view1->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
if(irr) cout <<"error="<<irr<<endl;
- if(ISetits(4,-1)==0) view1->SetParralel();
+ if(ISetits(4,-1)==0) view1->SetParallel();
else view1->SetPerspective();
view1->Front();
if(ISetits(3,-1)!=0) view1->ShowAxis();
//
c3->cd(2);
SSD->Draw();
- TPad *p2 = c3->GetPad(2);
+ TPad *p2 = (TPad*)c3->GetPad(2);
TView *view2 = p2->GetView();
if(view2){
view2->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
if(irr) cout <<"error="<<irr<<endl;
- if(ISetits(4,-1)==0) view2->SetParralel();
+ if(ISetits(4,-1)==0) view2->SetParallel();
else view2->SetPerspective();
view2->Top();
if(ISetits(3,-1)!=0) view2->ShowAxis();
//
TGeoManager *mgr2 = gGeoManager;
TGeoVolume *ALIC = mgr2->GetTopVolume();
- TCanvas *c4;
+ TCanvas *c4=0;
if(!(c4 = (TCanvas*)gROOT->FindObject("C4")))
c4 = new TCanvas("C4","ITS SDD Cylinder Geometry",900,450);
c4->Divide(2,1);
TGeoVolume *ITS,*SUPRB24=0;
TGeoNode *node;
- TArrow *arrow=new TArrow();
//
node = ALIC->FindNode("ITSV_1");
ITS = node->GetVolume();
//
c4->cd(1);
SUPRB24->Draw();
- TPad *p1 = c4->GetPad(1);
+ TPad *p1 = (TPad*)c4->GetPad(1);
TView *view1 = p1->GetView();
if(view1){
view1->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
if(irr) cout <<"error="<<irr<<endl;
- if(ISetits(4,-1)==0) view1->SetParralel();
+ if(ISetits(4,-1)==0) view1->SetParallel();
else view1->SetPerspective();
view1->Front();
if(ISetits(3,-1)!=0) view1->ShowAxis();
//
c4->cd(2);
SUPRB24->Draw();
- TPad *p2 = c4->GetPad(2);
+ TPad *p2 = (TPad*)c4->GetPad(2);
TView *view2 = p2->GetView();
if(view2){
view2->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
if(irr) cout <<"error="<<irr<<endl;
- if(ISetits(4,-1)==0) view2->SetParralel();
+ if(ISetits(4,-1)==0) view2->SetParallel();
else view2->SetPerspective();
view2->Top();
if(ISetits(3,-1)!=0) view2->ShowAxis();
//
TGeoManager *mgr2 = gGeoManager;
TGeoVolume *ALIC = mgr2->GetTopVolume();
- TCanvas *c4,*c5;
+ TCanvas *c4=0,*c5=0;
//if(!(c4 = (TCanvas*)gROOT->FindObject("C4")))
c4 = new TCanvas("C4","ITS RB24 Cable Trays and Patch Pannels",500,500);
//c4->Divide(2,1);
TGeoVolume *ITS,*SUPRB24=0;
TGeoNode *node;
- TArrow *arrow=new TArrow();
//
node = ALIC->FindNode("ITSV_1");
ITS = node->GetVolume();
if(view1){
view1->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
if(irr) cout <<"error="<<irr<<endl;
- if(ISetits(4,-1)==0) view1->SetParralel();
+ if(ISetits(4,-1)==0) view1->SetParallel();
else view1->SetPerspective();
view1->Front();
if(ISetits(3,-1)!=0) view1->ShowAxis();
if(view2){
view2->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
if(irr) cout <<"error="<<irr<<endl;
- if(ISetits(4,-1)==0) view2->SetParralel();
+ if(ISetits(4,-1)==0) view2->SetParallel();
else view2->SetPerspective();
view2->Top();
if(ISetits(3,-1)!=0) view2->ShowAxis();
//
TGeoManager *mgr2 = gGeoManager;
TGeoVolume *ALIC = mgr2->GetTopVolume();
- TCanvas *c5;
+ TCanvas *c5=0;
if(!(c5 = (TCanvas*)gROOT->FindObject("C5")))
c5 = new TCanvas("C5","ITS SDD Cylinder Geometry",900,450);
c5->Divide(2,1);
TGeoVolume *ITS,*SUPRB26=0;
TGeoNode *node;
- TArrow *arrow=new TArrow();
//
node = ALIC->FindNode("ITSV_1");
ITS = node->GetVolume();
//
c5->cd(1);
SUPRB26->Draw();
- TPad *p1 = c5->GetPad(1);
+ TPad *p1 = (TPad*)c5->GetPad(1);
TView *view1 = p1->GetView();
if(view1){
view1->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
if(irr) cout <<"error="<<irr<<endl;
- if(ISetits(4,-1)==0) view1->SetParralel();
+ if(ISetits(4,-1)==0) view1->SetParallel();
else view1->SetPerspective();
view1->Front();
if(ISetits(3,-1)!=0) view1->ShowAxis();
//
c5->cd(2);
SUPRB26->Draw();
- TPad *p2 = c5->GetPad(2);
+ TPad *p2 = (TPad*)c5->GetPad(2);
TView *view2 = p2->GetView();
if(view2){
view2->SetView(DSetits(2,-1.),DSetits(3,-1.),DSetits(4,-1.),irr);
if(irr) cout <<"error="<<irr<<endl;
- if(ISetits(4,-1)==0) view2->SetParralel();
+ if(ISetits(4,-1)==0) view2->SetParallel();
else view2->SetPerspective();
view2->Top();
if(ISetits(3,-1)!=0) view2->ShowAxis();
if(ISetits(5,-1)==1) SUPRB26->Raytrace();
//
}
+
+// Local functions to replace "regular" ones not available
+// in the environment where the macro runs
+
+//______________________________________________________________________
+void CreateMaterialsITS(){
+ // Create ITS materials
+ // This function defines the default materials used in the Geant
+ // Monte Carlo simulations for the geometries AliITSv1, AliITSv3,
+ // AliITSv11Hybrid.
+ // In general it is automatically replaced by
+ // the CreateMaterials routine defined in AliITSv?. Should the function
+ // CreateMaterials not exist for the geometry version you are using this
+ // one is used. See the definition found in AliITSv5 or the other routine
+ // for a complete definition.
+ // Inputs:
+ // none.
+ // Outputs:
+ // none.
+ // Return:
+ // none.
+
+ Bool_t fByThick=kTRUE; // Flag to use services materials by thickness
+ // ture, or mass false.
+
+// Int_t ifield = ((AliMagF*)TGeoGlobalMagField::Instance()->GetField())->Integ();
+// Float_t fieldm = ((AliMagF*)TGeoGlobalMagField::Instance()->GetField())->Max();
+ Int_t ifield = 2;
+ Float_t fieldm = 10.;
+
+ Float_t tmaxfd = 0.1; // 1.0; // Degree
+ Float_t stemax = 1.0; // cm
+ Float_t deemax = 0.1; // 30.0; // Fraction of particle's energy 0<deemax<=1
+ Float_t epsil = 1.0E-4; // 1.0; // cm
+ Float_t stmin = 0.0; // cm "Default value used"
+
+ Float_t tmaxfdSi = 0.1; // .10000E+01; // Degree
+ Float_t stemaxSi = 0.0075; // .10000E+01; // cm
+ Float_t deemaxSi = 0.1; // 0.30000E-02; // Fraction of particle's energy 0<deemax<=1
+ Float_t epsilSi = 1.0E-4;// .10000E+01;
+ Float_t stminSi = 0.0; // cm "Default value used"
+
+ Float_t tmaxfdAir = 0.1; // .10000E+01; // Degree
+ Float_t stemaxAir = .10000E+01; // cm
+ Float_t deemaxAir = 0.1; // 0.30000E-02; // Fraction of particle's energy 0<deemax<=1
+ Float_t epsilAir = 1.0E-4;// .10000E+01;
+ Float_t stminAir = 0.0; // cm "Default value used"
+
+ Float_t tmaxfdServ = 1.0; // 10.0; // Degree
+ Float_t stemaxServ = 1.0; // 0.01; // cm
+ Float_t deemaxServ = 0.5; // 0.1; // Fraction of particle's energy 0<deemax<=1
+ Float_t epsilServ = 1.0E-3; // 0.003; // cm
+ Float_t stminServ = 0.0; //0.003; // cm "Default value used"
+
+ // Freon PerFluorobuthane C4F10 see
+ // http://st-support-cooling-electronics.web.cern.ch/
+ // st-support-cooling-electronics/default.htm
+ Float_t afre[2] = { 12.011,18.9984032 };
+ Float_t zfre[2] = { 6., 9. };
+ Float_t wfre[2] = { 4.,10. };
+ Float_t densfre = 1.52;
+
+
+ //CM55J
+
+ Float_t aCM55J[4]={12.0107,14.0067,15.9994,1.00794};
+ Float_t zCM55J[4]={6.,7.,8.,1.};
+ Float_t wCM55J[4]={0.908508078,0.010387573,0.055957585,0.025146765};
+ Float_t dCM55J = 1.8;
+
+ //ALCM55J
+
+ Float_t aALCM55J[5]={12.0107,14.0067,15.9994,1.00794,26.981538};
+ Float_t zALCM55J[5]={6.,7.,8.,1.,13.};
+ Float_t wALCM55J[5]={0.817657902,0.0093488157,0.0503618265,0.0226320885,0.1};
+ Float_t dALCM55J = 1.9866;
+
+ //Si Chips
+
+ Float_t aSICHIP[6]={12.0107,14.0067,15.9994,1.00794,28.0855,107.8682};
+ Float_t zSICHIP[6]={6.,7.,8.,1.,14., 47.};
+ Float_t wSICHIP[6]={0.039730642,0.001396798,0.01169634,0.004367771,0.844665,0.09814344903};
+ Float_t dSICHIP = 2.36436;
+
+ //Inox
+
+ Float_t aINOX[9]={12.0107,54.9380, 28.0855,30.9738,32.066,58.6928,51.9961,95.94,55.845};
+ Float_t zINOX[9]={6.,25.,14.,15.,16., 28.,24.,42.,26.};
+ Float_t wINOX[9]={0.0003,0.02,0.01,0.00045,0.0003,0.12,0.17,0.025,0.654};
+ Float_t dINOX = 8.03;
+
+ //SDD HV microcable
+
+ Float_t aHVm[5]={12.0107,1.00794,14.0067,15.9994,26.981538};
+ Float_t zHVm[5]={6.,1.,7.,8.,13.};
+ Float_t wHVm[5]={0.520088819984,0.01983871336,0.0551367996,0.157399667056, 0.247536};
+ Float_t dHVm = 1.6087;
+
+ //SDD LV+signal cable
+
+ Float_t aLVm[5]={12.0107,1.00794,14.0067,15.9994,26.981538};
+ Float_t zLVm[5]={6.,1.,7.,8.,13.};
+ Float_t wLVm[5]={0.21722436468,0.0082859922,0.023028867,0.06574077612, 0.68572};
+ Float_t dLVm = 2.1035;
+
+ //SDD hybrid microcab
+
+ Float_t aHLVm[5]={12.0107,1.00794,14.0067,15.9994,26.981538};
+ Float_t zHLVm[5]={6.,1.,7.,8.,13.};
+ Float_t wHLVm[5]={0.24281879711,0.00926228815,0.02574224025,0.07348667449, 0.64869};
+ Float_t dHLVm = 2.0502;
+
+ //SDD anode microcab
+
+ Float_t aALVm[5]={12.0107,1.00794,14.0067,15.9994,26.981538};
+ Float_t zALVm[5]={6.,1.,7.,8.,13.};
+ Float_t wALVm[5]={0.392653705471,0.0128595919215,0.041626868025,0.118832707289, 0.431909};
+ Float_t dALVm = 2.0502;
+
+ //X7R capacitors
+
+ Float_t aX7R[7]={137.327,47.867,15.9994,58.6928,63.5460,118.710,207.2};
+ Float_t zX7R[7]={56.,22.,8.,28.,29.,50.,82.};
+ Float_t wX7R[7]={0.251639432,0.084755042,0.085975822,0.038244751,0.009471271,0.321736471,0.2081768};
+ Float_t dX7R = 7.14567;
+
+ // AIR
+
+ Float_t aAir[4]={12.0107,14.0067,15.9994,39.948};
+ Float_t zAir[4]={6.,7.,8.,18.};
+ Float_t wAir[4]={0.000124,0.755267,0.231781,0.012827};
+ Float_t dAir = 1.20479E-3;
+
+ // Water
+
+ Float_t aWater[2]={1.00794,15.9994};
+ Float_t zWater[2]={1.,8.};
+ Float_t wWater[2]={0.111894,0.888106};
+ Float_t dWater = 1.0;
+
+ // CERAMICS
+ // 94.4% Al2O3 , 2.8% SiO2 , 2.3% MnO , 0.5% Cr2O3
+ Float_t acer[5] = { 26.981539,15.9994,28.0855,54.93805,51.9961 };
+ Float_t zcer[5] = { 13., 8., 14., 25., 24. };
+ Float_t wcer[5] = {.4443408,.5213375,.0130872,.0178135,.003421};
+ Float_t denscer = 3.6;
+
+ //G10FR4
+
+ Float_t zG10FR4[14] = {14.00, 20.00, 13.00, 12.00, 5.00, 22.00, 11.00, 19.00, 26.00, 9.00, 8.00, 6.00, 7.00, 1.00};
+ Float_t aG10FR4[14] = {28.0855000,40.0780000,26.9815380,24.3050000,10.8110000,47.8670000,22.9897700,39.0983000,55.8450000,18.9984000,15.9994000,12.0107000,14.0067000,1.0079400};
+ Float_t wG10FR4[14] = {0.15144894,0.08147477,0.04128158,0.00904554,0.01397570,0.00287685,0.00445114,0.00498089,0.00209828,0.00420000,0.36043788,0.27529426,0.01415852,0.03427566};
+ Float_t densG10FR4= 1.8;
+
+ //--- EPOXY --- C18 H19 O3
+ Float_t aEpoxy[3] = {15.9994, 1.00794, 12.0107} ;
+ Float_t zEpoxy[3] = { 8., 1., 6.} ;
+ Float_t wEpoxy[3] = { 3., 19., 18.} ;
+ Float_t dEpoxy = 1.8 ;
+
+ // rohacell: C9 H13 N1 O2
+ Float_t arohac[4] = {12.01, 1.01, 14.010, 16.};
+ Float_t zrohac[4] = { 6., 1., 7., 8.};
+ Float_t wrohac[4] = { 14., 10., 2., 6.};
+ Float_t drohac = 0.052;
+
+ // If he/she means stainless steel (inox) + Aluminium and Zeff=15.3383 then
+//
+// %Al=81.6164 %inox=100-%Al
+
+ Float_t aInAl[5] = {27., 55.847,51.9961,58.6934,28.0855 };
+ Float_t zInAl[5] = {13., 26.,24.,28.,14. };
+ Float_t wInAl[5] = {.816164, .131443,.0330906,.0183836,.000919182};
+ Float_t dInAl = 3.075;
+
+ // Kapton
+
+ Float_t aKapton[4]={1.00794,12.0107, 14.010,15.9994};
+ Float_t zKapton[4]={1.,6.,7.,8.};
+ Float_t wKapton[4]={0.026362,0.69113,0.07327,0.209235};
+ Float_t dKapton = 1.42;
+
+ // Kapton + Cu (for Pixel Bus)
+
+ Float_t aKaptonCu[5]={1.00794, 12.0107, 14.010, 15.9994, 63.5460};
+ Float_t zKaptonCu[5]={1., 6., 7., 8., 29.};
+ Float_t wKaptonCuBus[5];
+
+ // Kapton + Cu (for Pixel MCM)
+
+ Float_t wKaptonCuMCM[5];
+
+ // Kapton + Cu (mix of two above)
+
+ Float_t wKaptonCuMix[5];
+
+ //SDD ruby sph.
+ Float_t aAlOxide[2] = { 26.981539,15.9994};
+ Float_t zAlOxide[2] = { 13., 8.};
+ Float_t wAlOxide[2] = {0.4707, 0.5293};
+ Float_t dAlOxide = 3.97;
+
+ // Silica for optical fibers: Si O2
+ Float_t aoptfib[2] = { 28.0855, 15.9994};
+ Float_t zoptfib[2] = { 14., 8. };
+ Float_t woptfib[2] = { 1., 2. };
+ Float_t doptfib = 2.55;
+
+ // Tetrafluorethylene-Perfluorpropylene (FEP) - 08 Mar 10
+ Float_t aFEP[2] = { 12.0107, 18.9984};
+ Float_t zFEP[2] = { 6. , 9. };
+ Float_t wFEP[2] = { 1. , 2. };
+ Float_t dFEP = 2.15;
+
+ // PVC (C2H3Cl)n - 08 Jul 10
+ Float_t aPVC[3] = { 12.0107, 1.00794, 35.4527};
+ Float_t zPVC[3] = { 6. , 1. , 35. };
+ Float_t wPVC[3] = { 2. , 3. , 1. };
+ Float_t dPVC = 1.3;
+
+ //SSD NiSn capacitor ends
+ Float_t aNiSn[2] = { 56.6934,118.710};
+ Float_t zNiSn[2] = { 28., 50.};
+ Float_t wNiSn[2] = {0.33, 0.67};
+ Float_t dNiSn = wNiSn[0]*8.908 + wNiSn[1]*7.310;
+
+ AliMaterial(1,"SI$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
+ AliMedium(1,"SI$",1,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi);
+
+ AliMaterial(2,"SPD SI CHIP$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
+ AliMedium(2,"SPD SI CHIP$",2,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi);
+
+ AliMaterial(3,"SPD SI BUS$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
+ AliMedium(3,"SPD SI BUS$",3,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi);
+
+ AliMixture(4,"C (M55J)$",aCM55J,zCM55J,dCM55J,4,wCM55J);
+ AliMedium(4,"C (M55J)$",4,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMixture(5,"AIR$",aAir,zAir,dAir,4,wAir);
+ AliMedium(5,"AIR$",5,0,ifield,fieldm,tmaxfdAir,stemaxAir,deemaxAir,epsilAir,stminAir);
+
+ AliMixture(6,"GEN AIR$",aAir,zAir,dAir,4,wAir);
+ AliMedium(6,"GEN AIR$",6,0,ifield,fieldm,tmaxfdAir,stemaxAir,deemaxAir,epsilAir,stminAir);
+
+ AliMixture(7,"SDD SI CHIP$",aSICHIP,zSICHIP,dSICHIP,6,wSICHIP);
+ AliMedium(7,"SDD SI CHIP$",7,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi);
+
+ AliMixture(9,"SDD C (M55J)$",aCM55J,zCM55J,dCM55J,4,wCM55J);
+ AliMedium(9,"SDD C (M55J)$",9,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMixture(10,"SDD AIR$",aAir,zAir,dAir,4,wAir);
+ AliMedium(10,"SDD AIR$",10,0,ifield,fieldm,tmaxfdAir,stemaxAir,deemaxAir,epsilAir,stminAir);
+
+ AliMaterial(11,"AL$",0.26982E+02,0.13000E+02,0.26989E+01,0.89000E+01,0.99900E+03);
+ AliMedium(11,"AL$",11,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMixture(12, "Water$",aWater,zWater,dWater,2,wWater);
+ AliMedium(12,"WATER$",12,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMixture(13,"Freon$",afre,zfre,densfre,-2,wfre);
+ AliMedium(13,"Freon$",13,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMaterial(14,"COPPER$",0.63546E+02,0.29000E+02,0.89600E+01,0.14300E+01,0.99900E+03);
+ AliMedium(14,"COPPER$",14,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+ AliMixture(15,"CERAMICS$",acer,zcer,denscer,5,wcer);
+ AliMedium(15,"CERAMICS$",15,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMixture(20,"SSD C (M55J)$",aCM55J,zCM55J,dCM55J,4,wCM55J);
+ AliMedium(20,"SSD C (M55J)$",20,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMixture(21,"SSD AIR$",aAir,zAir,dAir,4,wAir);
+ AliMedium(21,"SSD AIR$",21,0,ifield,fieldm,tmaxfdAir,stemaxAir,deemaxAir,epsilAir,stminAir);
+
+ AliMixture(25,"G10FR4$",aG10FR4,zG10FR4,densG10FR4,14,wG10FR4);
+ AliMedium(25,"G10FR4$",25,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMixture(26,"GEN C (M55J)$",aCM55J,zCM55J,dCM55J,4,wCM55J);
+ AliMedium(26,"GEN C (M55J)$",26,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMixture(27,"GEN Air$",aAir,zAir,dAir,4,wAir);
+ AliMedium(27,"GEN Air$",27,0,ifield,fieldm,tmaxfdAir,stemaxAir,deemaxAir,epsilAir,stminAir);
+
+ AliMixture(47,"PVC$",aPVC,zPVC,dPVC,-3,wPVC);
+ AliMedium(47,"PVC$",47,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ Double_t cuFrac = 0.56;
+ Double_t kFrac = 1.0 - cuFrac;
+ Double_t cuDens = 8.96;
+ Float_t dKaptonCuBus = cuFrac * cuDens + kFrac * dKapton;
+ for (Int_t j=0; j<4; j++)
+ wKaptonCuBus[j] = wKapton[j]*kFrac;
+ wKaptonCuBus[4] = cuFrac;
+ AliMixture(48, "SPD-BUS CU KAPTON", aKaptonCu, zKaptonCu, dKaptonCuBus, 5, wKaptonCuBus);
+ AliMedium(48,"SPD-BUS CU KAPTON$",48,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ cuFrac = 0.5;
+ kFrac = 1.0 - cuFrac;
+ Float_t dKaptonCuMCM = cuFrac * cuDens + kFrac * dKapton;
+ for (Int_t j=0; j<4; j++)
+ wKaptonCuMCM[j] = wKapton[j]*kFrac;
+ wKaptonCuMCM[4] = cuFrac;
+ AliMixture(49, "SPD-MCM CU KAPTON", aKaptonCu, zKaptonCu, dKaptonCuMCM, 5, wKaptonCuMCM);
+ AliMedium(49,"SPD-MCM CU KAPTON$",49,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ cuFrac = (0.56 + 0.5) / 2.0;
+ kFrac = 1.0 - cuFrac;
+ Float_t dKaptonCuMix = cuFrac * cuDens + kFrac * dKapton;
+ for (Int_t j=0; j<4; j++)
+ wKaptonCuMix[j] = wKapton[j]*kFrac;
+ wKaptonCuMix[4] = cuFrac;
+ AliMixture(50, "SPD-MIX CU KAPTON", aKaptonCu, zKaptonCu, dKaptonCuMix, 5, wKaptonCuMix);
+ AliMedium(50,"SPD-MIX CU KAPTON$",50,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMaterial(51,"SPD SI$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
+ AliMedium(51,"SPD SI$",51,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi);
+
+ AliMaterial(52,"SPD SI CHIP$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
+ AliMedium(52,"SPD SI CHIP$",52,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi);
+
+ AliMaterial(53,"SPD SI BUS$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
+ AliMedium(53,"SPD SI BUS$",53,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi);
+
+ AliMixture(54,"SPD C (M55J)$",aCM55J,zCM55J,dCM55J,4,wCM55J);
+ AliMedium(54,"SPD C (M55J)$",54,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMixture(55,"SPD AIR$",aAir,zAir,dAir,4,wAir);
+ AliMedium(55,"SPD AIR$",55,0,ifield,fieldm,tmaxfdAir,stemaxAir,deemaxAir,epsilAir,stminAir);
+
+ AliMixture(56, "SPD KAPTON(POLYCH2)", aKapton, zKapton, dKapton, 4, wKapton);
+ AliMedium(56,"SPD KAPTON(POLYCH2)$",56,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ // Gaseous Freon has same chemical composition but air density at 1.7 atm
+ AliMixture(59,"GASEOUS FREON$",afre,zfre,1.7*dAir,-2,wfre);
+ AliMedium(59,"GASEOUS FREON$",59,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMixture(61,"EPOXY$",aEpoxy,zEpoxy,dEpoxy,-3,wEpoxy);
+ AliMedium(61,"EPOXY$",61,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMaterial(62,"SILICON$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
+ AliMedium(62,"SILICON$",62,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi);
+
+ AliMixture(63, "KAPTONH(POLYCH2)", aKapton, zKapton, dKapton, 4, wKapton);
+ AliMedium(63,"KAPTONH(POLYCH2)$",63,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMaterial(64,"ALUMINUM$",0.26982E+02,0.13000E+02,0.26989E+01,0.89000E+01,0.99900E+03);
+ AliMedium(64,"ALUMINUM$",64,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMixture(65,"INOX$",aINOX,zINOX,dINOX,9,wINOX);
+ AliMedium(65,"INOX$",65,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMixture(66,"NiSn$",aNiSn,zNiSn,dNiSn,2,wNiSn);
+ AliMedium(66,"NiSn$",66,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMaterial(67,"Sn$", 118.710, 50., 7.310, 1.206, 999.);
+ AliMedium(67,"Sn$",67,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMixture(68,"ROHACELL$",arohac,zrohac,drohac,-4,wrohac);
+ AliMedium(68,"ROHACELL$",68,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMixture(69,"SDD C AL (M55J)$",aALCM55J,zALCM55J,dALCM55J,5,wALCM55J);
+ AliMedium(69,"SDD C AL (M55J)$",69,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMixture(70, "SDDKAPTON (POLYCH2)", aKapton, zKapton, dKapton, 4, wKapton);
+ AliMedium(70,"SDDKAPTON (POLYCH2)$",70,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMaterial(71,"ITS SANDW A$",0.12011E+02,0.60000E+01,0.2115E+00,0.17479E+03,0.99900E+03);
+ AliMedium(71,"ITS SANDW A$",71,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMaterial(72,"ITS SANDW B$",0.12011E+02,0.60000E+01,0.27000E+00,0.18956E+03,0.99900E+03);
+ AliMedium(72,"ITS SANDW B$",72,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMaterial(73,"ITS SANDW C$",0.12011E+02,0.60000E+01,0.41000E+00,0.90868E+02,0.99900E+03);
+ AliMedium(73,"ITS SANDW C$",73,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMaterial(74,"HEAT COND GLUE$",0.12011E+02,0.60000E+01,0.1930E+01,0.22100E+02,0.99900E+03);
+ AliMedium(74,"HEAT COND GLUE$",74,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMaterial(75,"ELASTO SIL$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
+ AliMedium(75,"ELASTO SIL$",75,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ // SPD bus (data from Petra Riedler)
+ Float_t aSPDbus[5] = {1.00794,12.0107,14.01,15.9994,26.982 };
+ Float_t zSPDbus[5] = {1.,6.,7.,8.,13.};
+ Float_t wSPDbus[5] = {0.023523,0.318053,0.009776,0.078057,0.570591};
+ Float_t dSPDbus = 2.128505;
+
+ // AliMaterial(76,"SPDBUS(AL+KPT+EPOX)$",0.19509E+02,0.96502E+01,0.19060E+01,0.15413E+02,0.99900E+03);
+ AliMixture(76,"SPDBUS(AL+KPT+EPOX)$",aSPDbus,zSPDbus,dSPDbus,5,wSPDbus);
+ AliMedium(76,"SPDBUS(AL+KPT+EPOX)$",76,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMixture(77,"SDD X7R capacitors$",aX7R,zX7R,dX7R,7,wX7R);
+ AliMedium(77,"SDD X7R capacitors$",77,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMixture(78,"SDD ruby sph. Al2O3$",aAlOxide,zAlOxide,dAlOxide,2,wAlOxide);
+ AliMedium(78,"SDD ruby sph. Al2O3$",78,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMaterial(79,"SDD SI insensitive$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
+ AliMedium(79,"SDD SI insensitive$",79,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMixture(80,"SDD HV microcable$",aHVm,zHVm,dHVm,5,wHVm);
+ AliMedium(80,"SDD HV microcable$",80,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMixture(81,"SDD LV+signal cable$",aLVm,zLVm,dLVm,5,wLVm);
+ AliMedium(81,"SDD LV+signal cable$",81,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMixture(82,"SDD hybrid microcab$",aHLVm, zHLVm,dHLVm,5,wHLVm);
+ AliMedium(82,"SDD hybrid microcab$",82,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMixture(83,"SDD anode microcab$",aALVm,zALVm,dALVm,5,wALVm);
+ AliMedium(83,"SDD anode microcab$",83,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+ Float_t aDSring[4]={12.0107, 1.00794, 14.0067, 15.9994};
+ Float_t zDSring[4]={ 6., 1., 7., 8.};
+ Float_t wDSring[4]={ 0.854323888, 0.026408778, 0.023050265, 0.096217069};
+ Float_t dDSring = 0.2875;
+ AliMixture(84,"SDD/SSD rings$",aDSring,zDSring,dDSring,4,wDSring);
+ AliMedium(84,"SDD/SSD rings$",84,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMixture(85,"inox/alum$",aInAl,zInAl,dInAl,5,wInAl);
+ AliMedium(85,"inox/alum$",85,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ // special media to take into account services in the SDD and SSD
+ // cones for the FMD
+ //Begin_Html
+ /*
+ <A HREF="http://www.Physics.ohio-state.edu/~nilsen/ITS/ITS_MatBudget_4B.xls">
+ </pre>
+ <br clear=left>
+ <font size=+2 color=blue>
+ <p> The Exel spread sheet from which these density number come from.
+ </font></A>
+ */
+ //End_Html
+
+ // AliMaterial(86,"AIRFMDSDD$",0.14610E+02,0.73000E+01,0.12050E-02,0.30423E+05,0.99900E+03);
+ Float_t aA[13],zZ[13],wW[13],den;
+ // From Pierluigi Barberis calculations of 2SPD+1SDD October 2 2002.
+ zZ[0] = 1.0; aA[0] = 1.00794; // Hydrogen
+ zZ[1] = 6.0; aA[1] = 12.011; // Carbon
+ zZ[2] = 7.0; aA[2] = 14.00674; // Nitrogen
+ zZ[3] = 8.0; aA[3] = 15.9994; // Oxigen
+ zZ[4] = 14.0; aA[4] = 28.0855; // Silicon
+ zZ[5] = 24.0; aA[5] = 51.9961; //Cromium
+ zZ[6] = 25.0; aA[6] = 54.938049; // Manganese
+ zZ[7] = 26.0; aA[7] = 55.845; // Iron
+ zZ[8] = 28.0; aA[8] = 58.6934; // Nickle
+ zZ[9] = 29.0; aA[9] = 63.546; // Copper
+ zZ[10] = 13.0; aA[10] = 26.981539; // Alulminum
+ zZ[11] = 47.0; aA[11] = 107.8682; // Silver
+ zZ[12] = 27.0; aA[12] = 58.9332; // Cobolt
+ wW[0] = 0.019965;
+ wW[1] = 0.340961;
+ wW[2] = 0.041225;
+ wW[3] = 0.200352;
+ wW[4] = 0.000386;
+ wW[5] = 0.001467;
+ wW[6] = 0.000155;
+ wW[7] = 0.005113;
+ wW[8] = 0.000993;
+ wW[9] = 0.381262;
+ wW[10] = 0.008121;
+ wW[11] = 0.000000;
+ wW[12] = 0.000000;
+ if(fByThick){// New values seeITS_MatBudget_4B.xls
+ den = 1.5253276; // g/cm^3 Cell O370
+ }else{
+ den = 2.58423412; // g/cm^3 Cell L370
+ } // end if fByThick
+ //den = 6161.7/(3671.58978);//g/cm^3 Volume does not exclude holes
+ AliMixture(86,"AIRFMDSDD$",aA,zZ,den,+11,wW);
+ AliMedium(86,"AIRFMDSDD$",86,0,ifield,fieldm,tmaxfdAir,stemaxAir,
+ deemaxAir,epsilAir,stminAir);
+
+ //AliMaterial(87,"AIRFMDSSD$",0.14610E+02,0.73000E+01,0.12050E-02,0.30423E+05,0.99900E+03);
+ // From Pierluigi Barberis calculations of SSD October 2 2002.
+ wW[0] = 0.019777;
+ wW[1] = 0.325901;
+ wW[2] = 0.031848;
+ wW[3] = 0.147668;
+ wW[4] = 0.030609;
+ wW[5] = 0.013993;
+ wW[6] = 0.001479;
+ wW[7] = 0.048792;
+ wW[8] = 0.009477;
+ wW[9] = 0.350697;
+ wW[10] = 0.014546;
+ wW[11] = 0.005213;
+ wW[12] = 0.000000;
+ if(fByThick){// New values seeITS_MatBudget_4B.xls
+ den = 1.2464275; // g/cm^3 Cell O403
+ }else{
+ den = 1.28134409; // g/cm^3 Cell L403
+ } // end if fByThick
+ //den = 7666.3/(9753.553259); // volume does not exclude holes
+ AliMixture(87,"AIRFMDSSD$",aA,zZ,den,+12,wW);
+ AliMedium(87,"AIRFMDSSD$",87,0,ifield,fieldm,tmaxfdAir,stemaxAir,
+ deemaxAir,epsilAir,stminAir);
+
+ //AliMaterial(88,"ITS SANDW CFMDSDD$",0.12011E+02,0.60000E+01,0.41000E+00,0.90868E+02,0.99900E+03);
+ // From Pierluigi Barberis calculations of 1SDD+Carbon fiber October 2 2002
+ wW[0] = 0.016302;
+ wW[1] = 0.461870;
+ wW[2] = 0.033662;
+ wW[3] = 0.163595;
+ wW[4] = 0.000315;
+ wW[5] = 0.001197;
+ wW[6] = 0.000127;
+ wW[7] = 0.004175;
+ wW[8] = 0.000811;
+ wW[9] = 0.311315;
+ wW[10] = 0.006631;
+ wW[11] = 0.000000;
+ wW[12] = 0.000000;
+ if(fByThick){// New values seeITS_MatBudget_4B.xls
+ den = 1.9353276; // g/cm^3 Cell N370
+ }else{
+ den = 3.2788626; // g/cm^3 Cell F370
+ } // end if fByThick
+ //den = 7667.1/(3671.58978); // Volume does not excludeholes
+ AliMixture(88,"ITS SANDW CFMDSDD$",aA,zZ,den,+11,wW);
+ AliMedium(88,"ITS SANDW CFMDSDD$",88,0,ifield,fieldm,tmaxfd,stemax,
+ deemax,epsil,stmin);
+
+ //AliMaterial(89,"ITS SANDW CFMDSSD$",0.12011E+02,0.60000E+01,0.41000E+00,0.90868E+02,0.99900E+03);
+ // From Pierluigi Barberis calculations of SSD+Carbon fiber October 2 2002.
+ wW[0] = 0.014065;
+ wW[1] = 0.520598;
+ wW[2] = 0.022650;
+ wW[3] = 0.105018;
+ wW[4] = 0.021768;
+ wW[5] = 0.009952;
+ wW[6] = 0.001051;
+ wW[7] = 0.034700;
+ wW[8] = 0.006740;
+ wW[9] = 0.249406;
+ wW[10] = 0.010345;
+ wW[11] = 0.0003707;
+ wW[12] = 0.000000;
+ if(fByThick){// New values seeITS_MatBudget_4B.xls
+ den = 1.6564275; // g/cm^3 Cell N304
+ }else{
+ den = 1.7028296; // g/cm^3 Cell F304
+ } // end if fByThick
+ //den = 1166.5/(3671.58978); // Volume does not exclude holes
+ AliMixture(89,"ITS SANDW CFMDSSD$",aA,zZ,den,+12,wW);
+ AliMedium(89,"ITS SANDW CFMDSSD$",89,0,ifield,fieldm,tmaxfd,stemax,
+ deemax,epsil,stmin);
+
+ //AliMaterial(97,"SPD SERVICES$",0.12011E+02,0.60000E+01,0.41000E+00,0.90868E+02,0.99900E+03);
+ // From Pierluigi Barberis calculations of 1SPD October 2 2002.
+ wW[0] = 0.005970;
+ wW[1] = 0.304704;
+ wW[2] = 0.042510;
+ wW[3] = 0.121715;
+ wW[4] = 0.001118;
+ wW[5] = 0.030948;
+ wW[6] = 0.003270;
+ wW[7] = 0.107910;
+ wW[8] = 0.020960;
+ wW[9] = 0.360895;
+ wW[10] = 0.000000;
+ wW[11] = 0.000000;
+ wW[12] = 0.000000;
+ if(fByThick){// New values seeITS_MatBudget_4B.xls
+ den = 80.31136576; // g/cm^3 Cell H329
+ }else{
+ den = 87.13062; // g/cm^3 Cell G329
+ } // end if fByThick
+ //den = 1251.3/(0.05*2.0*TMath::Pi()*(7.75*7.75 - 3.7*3.7)); // g/cm^3
+ AliMixture(97,"SPD SERVICES$",aA,zZ,den,+10,wW);
+ AliMedium(97,"SPD SERVICES$",97,0,ifield,fieldm,tmaxfd,stemax,
+ deemax,epsil,stmin);
+
+
+ // Special media
+
+ AliMaterial(90,"SPD shield$", 12.011, 6., 1.93 , 22.36, 999);
+ AliMedium(90,"SPD shield$",90,0,ifield,fieldm,tmaxfdServ,stemaxServ,deemaxServ,epsilServ,stminServ);
+
+ // SPD End Ladder (data from Petra Riedler)
+ Float_t aSPDel[5] = {1.00794,12.0107,14.01,15.9994,63.54 };
+ Float_t zSPDel[5] = {1.,6.,7.,8.,29.};
+ Float_t wSPDel[5] = {0.004092,0.107274,0.011438,0.032476,0.844719};
+ Float_t dSPDel = 3.903403;
+
+ // AliMaterial(91, "SPD End ladder$", 47.0447, 21.7963, 3.6374, 4.4711, 999);
+ AliMixture(91,"SPD End ladder$",aSPDel,zSPDel,dSPDel,5,wSPDel);
+ AliMedium(91,"SPD End ladder$",91,0,ifield,fieldm,tmaxfdServ,stemaxServ,deemaxServ,epsilServ,stminServ);
+
+ AliMaterial(92, "SPD cone$",28.0855, 14., 2.33, 9.36, 999);
+ AliMedium(92,"SPD cone$",92,0,ifield,fieldm,tmaxfdServ,stemaxServ,deemaxServ,epsilServ,stminServ);
+ /* Material with fractional Z not actually used
+ AliMaterial(93, "SDD End ladder$", 69.9298, 29.8246, 0.3824, 36.5103, 999);
+ AliMedium(93,"SDD End ladder$",93,0,ifield,fieldm,tmaxfdServ,stemaxServ,deemaxServ,epsilServ,stminServ);
+ */
+ AliMaterial(94, "SDD cone$",63.546, 29., 1.15, 1.265, 999);
+ AliMedium(94,"SDD cone$",94,0,ifield,fieldm,tmaxfdServ,stemaxServ,deemaxServ,epsilServ,stminServ);
+ /* Material with fractional Z not actually used
+ AliMaterial(95, "SSD End ladder$", 32.0988, 15.4021, 0.68, 35.3238, 999);
+ AliMedium(95,"SSD End ladder$",95,0,ifield,fieldm,tmaxfdServ,stemaxServ,deemaxServ,epsilServ,stminServ);
+ */
+ AliMaterial(96, "SSD cone$",63.546, 29., 1.15, 1.265, 999);
+ AliMedium(96,"SSD cone$",96,0,ifield,fieldm,tmaxfdServ,stemaxServ,deemaxServ,epsilServ,stminServ);
+
+ AliMixture(98,"SDD OPTICFIB$",aoptfib,zoptfib,doptfib,-2,woptfib);
+ AliMedium(98,"SDD OPTICFIB$",98,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMixture(95,"SSD FEP$",aFEP,zFEP,dFEP,-2,wFEP);
+ AliMedium(95,"SSD FEP$",95,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ // Mean material for low-voltage cables on SPD trays Side A
+ // (Copper + PolyEthylene (C2-H4)) (D.Elia for cable number and
+ // cross-section area, M.Sitta for elemental computation) - 26 Feb 10
+ wW[0] = 0.323024;//H
+ wW[2] = 0.515464;//Cu
+ wW[1] = 0.161512;//C
+ wW[3] = 0.000000;//O
+ wW[4] = 0.000000;//S
+ wW[5] = 0.000000;//F
+ wW[6] = 0.000000;//Sn
+ wW[7] = 0.000000;//Pb
+ wW[8] = 0.000000;//Cr
+ wW[9] = 0.000000;//Si
+ wW[10] = 0.000000;//Ni
+ wW[11] = 0.000000;//Ca
+
+ den = 5.078866;
+ AliMixture(60,"SPD_LOWCABLES$",aA,zZ,den,+3,wW);
+ AliMedium(60,"SPD_LOWCABLES$",60,0,ifield,fieldm,tmaxfd,stemax,
+ deemax,epsil,stmin);
+
+ // Mean material for high-voltage cables on SPD trays Side A & C
+ // (Copper + HD PolyEthylene (C2-H2)) (D.Elia for cable number and
+ // cross-section area, M.Sitta for elemental computation) - 10 Jun 10
+ wW[0] = 0.083766;//H
+ wW[2] = 0.417136;//Cu
+ wW[1] = 0.499098;//C
+ wW[3] = 0.000000;//O
+ wW[4] = 0.000000;//S
+ wW[5] = 0.000000;//F
+ wW[6] = 0.000000;//Sn
+ wW[7] = 0.000000;//Pb
+ wW[8] = 0.000000;//Cr
+ wW[9] = 0.000000;//Si
+ wW[10] = 0.000000;//Ni
+ wW[11] = 0.000000;//Ca
+
+ den = 1.514930;
+ AliMixture(58,"SPD_HICABLES$",aA,zZ,den,+3,wW);
+ AliMedium(58,"SPD_HICABLES$",58,0,ifield,fieldm,tmaxfd,stemax,
+ deemax,epsil,stmin);
+
+ // PolyUrethane [C25-H42-N2-O6] - 07 Mar 10
+ zZ[2] = 7.0; aA[2] = 14.0067; // Nitrogen - From Root TGeoElementTable
+
+ wW[0] = 0.090724;//H
+ wW[2] = 0.060035;//N
+ wW[1] = 0.643513;//C
+ wW[3] = 0.205728;//O
+ wW[4] = 0.000000;//S
+ wW[5] = 0.000000;//F
+ wW[6] = 0.000000;//Sn
+ wW[7] = 0.000000;//Pb
+ wW[8] = 0.000000;//Cr
+ wW[9] = 0.000000;//Si
+ wW[10] = 0.000000;//Ni
+ wW[11] = 0.000000;//Ca
+
+ den = 1.158910;
+ AliMixture(67,"POLYURETHANE$",aA,zZ,den,+4,wW);
+ AliMedium(67,"POLYURETHANE$",67,0,ifield,fieldm,tmaxfd,stemax,
+ deemax,epsil,stmin);
+
+ // POM (Polyoxymethylene = (CH2O)n ) - 02 May 10
+ zZ[2] = 8.0; aA[2] = 15.9994; // Oxigen
+
+ wW[0] = 0.067137;//H
+ wW[1] = 0.400016;//C
+ wW[2] = 0.532847;//O
+ wW[3] = 0.000000;//O
+ wW[4] = 0.000000;//S
+ wW[5] = 0.000000;//F
+ wW[6] = 0.000000;//Sn
+ wW[7] = 0.000000;//Pb
+ wW[8] = 0.000000;//Cr
+ wW[9] = 0.000000;//Si
+ wW[10] = 0.000000;//Ni
+ wW[11] = 0.000000;//Ca
+
+ den = 1.4200;
+ AliMixture(57,"POLYOXYMETHYLENE$",aA,zZ,den,+3,wW);
+ AliMedium(57,"POLYOXYMETHYLENE$",57,0,ifield,fieldm,tmaxfd,stemax,
+ deemax,epsil,stmin);
+
+
+ // Anticorodal: Aliminum alloy for tray ring support on Side A
+ den = 2.710301;
+ AliMaterial(93,"ANTICORODAL$",0.26982E+02,0.13000E+02,den,0.89000E+01,0.99900E+03);
+ AliMedium(93,"ANTICORODAL$",93,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+}
+
+//_____________________________________________________________________________
+void AliMaterial(Int_t imat, const char* name, Float_t a,
+ Float_t z, Float_t dens, Float_t radl,
+ Float_t absl) {
+
+ TString uniquename = "ITS";
+ uniquename.Append("_");
+ uniquename.Append(name);
+
+ gGeoManager->Material(uniquename.Data(), a, z, dens, imat, radl, absl);
+
+}
+
+//_____________________________________________________________________________
+void AliMedium(Int_t numed, const char *name, Int_t nmat,
+ Int_t isvol, Int_t ifield, Float_t fieldm,
+ Float_t tmaxfd, Float_t stemax, Float_t deemax,
+ Float_t epsil, Float_t stmin){
+
+ TString uniquename = "ITS";
+ uniquename.Append("_");
+ uniquename.Append(name);
+
+ gGeoManager->Medium(uniquename.Data(),numed,nmat, isvol, ifield, fieldm,
+ tmaxfd, stemax,deemax, epsil, stmin);
+
+}
+
+//_____________________________________________________________________________
+void AliMixture(Int_t kmat, const char* name, Float_t* a, Float_t* z,
+ Double_t dens, Int_t nlmat, Float_t* wmat)
+{
+ //
+ // Defines mixture OR COMPOUND IMAT as composed by
+ // THE BASIC NLMAT materials defined by arrays A,Z and WMAT
+ //
+ // If NLMAT > 0 then wmat contains the proportion by
+ // weights of each basic material in the mixture.
+ //
+ // If nlmat < 0 then WMAT contains the number of atoms
+ // of a given kind into the molecule of the COMPOUND
+ // In this case, WMAT in output is changed to relative
+ // weigths.
+ //
+
+ TString uniquename = "ITS";
+ uniquename.Append("_");
+ uniquename.Append(name);
+
+
+ Double_t* da = CreateDoubleArray(a, TMath::Abs(nlmat));
+ Double_t* dz = CreateDoubleArray(z, TMath::Abs(nlmat));
+ Double_t* dwmat = CreateDoubleArray(wmat, TMath::Abs(nlmat));
+
+ Mixture(kmat, uniquename.Data(), da, dz, dens, nlmat, dwmat);
+ for (Int_t i=0; i<nlmat; i++) {
+ a[i] = da[i]; z[i] = dz[i]; wmat[i] = dwmat[i];
+ }
+
+ delete [] da;
+ delete [] dz;
+ delete [] dwmat;
+}
+
+//_____________________________________________________________________________
+void Mixture(Int_t& kmat, const char* name, Double_t* a, Double_t* z,
+ Double_t dens, Int_t nlmat, Double_t* wmat)
+{
+ //
+ // Defines mixture OR COMPOUND IMAT as composed by
+ // THE BASIC NLMAT materials defined by arrays A,Z and WMAT
+ //
+ // If NLMAT > 0 then wmat contains the proportion by
+ // weights of each basic material in the mixture.
+ //
+ // If nlmat < 0 then WMAT contains the number of atoms
+ // of a given kind into the molecule of the COMPOUND
+ // In this case, WMAT in output is changed to relative
+ // weigths.
+ //
+
+ if (nlmat < 0) {
+ nlmat = - nlmat;
+ Double_t amol = 0;
+ Int_t i;
+ for (i=0;i<nlmat;i++) {
+ amol += a[i]*wmat[i];
+ }
+ for (i=0;i<nlmat;i++) {
+ wmat[i] *= a[i]/amol;
+ }
+ }
+ gGeoManager->Mixture(name, a, z, dens, nlmat, wmat, kmat);
+}
+
+//_____________________________________________________________________________
+Double_t* CreateDoubleArray(Float_t* array, Int_t size)
+{
+// Converts Float_t* array to Double_t*,
+// !! The new array has to be deleted by user.
+// ---
+
+ Double_t* doubleArray;
+ if (size>0) {
+ doubleArray = new Double_t[size];
+ for (Int_t i=0; i<size; i++) doubleArray[i] = array[i];
+ } else {
+ //doubleArray = 0;
+ doubleArray = new Double_t[1];
+ }
+ return doubleArray;
+}
+
+//______________________________________________________________________
+Bool_t Make2DCrossSections(TPolyLine &a0,TPolyLine &a1,
+ TPolyLine &b0,TPolyLine &b1,TPolyMarker &p)
+{
+ //
+ // Fill the objects with the points representing
+ // a0 the outer carbon fiber SPD sector shape Cross Section A
+ // a1 the inner carbon fiber SPD sector shape Cross Section A
+ // b0 the outer carbon fiber SPD sector shape Cross Section B
+ // b1 the inner carbon fiber SPD sector shape Cross Section B
+ //
+ // Inputs:
+ // TPolyLine &a0 The outer carbon fiber SPD sector shape
+ // TPolyLine &a1 The Inner carbon fiber SPD sector shape
+ // TPolyLine &b0 The outer carbon fiber SPD sector shape
+ // TPolyLine &b1 The Inner carbon fiber SPD sector shape
+ // TPolyMarker &p The points where the ladders are to be placed
+ // Outputs:
+ // TPolyLine &a0 The shape filled with the points
+ // TPolyLine &a1 The shape filled with the points
+ // TPolyLine &b0 The shape filled with the points
+ // TPolyLine &b1 The shape filled with the points
+ // TPolyMarker &p The filled array of points
+ // Return:
+ // An error flag.
+ //
+ Int_t n0,n1,i;
+ Double_t x,y;
+ TGeoVolume *a0V,*a1V,*b0V,*b1V;
+ TGeoXtru *a0S,*a1S,*b0S,*b1S;
+ TGeoManager *mgr = gGeoManager;
+
+ a0V = mgr->GetVolume("ITSSPDCarbonFiberSupportSectorA0");
+ a0S = dynamic_cast<TGeoXtru*>(a0V->GetShape());
+ n0 = a0S->GetNvert();
+ a0.SetPolyLine(n0+1);
+ //for(i=0;i<fSPDsectorPoints0.GetSize();i++)
+ // printf("%d %d %d\n",i,fSPDsectorPoints0[i],fSPDsectorPoints1[i]);
+ for(i=0;i<n0;i++){
+ x = a0S->GetX(i);
+ y = a0S->GetY(i);
+ //printf("%d %g %g\n",i,x,y);
+ a0.SetPoint(i,x,y);
+ if(i==0) a0.SetPoint(n0,x,y);
+ } // end for i
+ a1V = mgr->GetVolume("ITSSPDCarbonFiberSupportSectorAirA1");
+ a1S = dynamic_cast<TGeoXtru*>(a1V->GetShape());
+ n1 = a1S->GetNvert();
+ a1.SetPolyLine(n1+1);
+ for(i=0;i<n1;i++){
+ x = a1S->GetX(i);
+ y = a1S->GetY(i);
+ a1.SetPoint(i,x,y);
+ if(i==0) a1.SetPoint(n1,x,y);
+ } // end for i
+ // Cross Section B
+ b0V = mgr->GetVolume("ITSSPDCarbonFiberSupportSectorEndB0");
+ b0S = dynamic_cast<TGeoXtru*>(b0V->GetShape());
+ n0 = b0S->GetNvert();
+ b0.SetPolyLine(n0+1);
+ for(i=0;i<n0;i++){
+ x = b0S->GetX(i);
+ y = b0S->GetY(i);
+ b0.SetPoint(i,x,y);
+ if(i==0) b0.SetPoint(n0,x,y);
+ } // end for i
+ b1V = mgr->GetVolume("ITSSPDCarbonFiberSupportSectorEndAirB1");
+ b1S = dynamic_cast<TGeoXtru*>(b1V->GetShape());
+ n1 = b1S->GetNvert();
+ b1.SetPolyLine(n1+1);
+ for(i=0;i<n1;i++){
+ x = b1S->GetX(i);
+ y = b1S->GetY(i);
+ b1.SetPoint(i,x,y);
+ if(i==0) b1.SetPoint(n1,x,y);
+ } // end for i
+ //
+ Double_t x0,y0,x1,y1;
+ p.SetPolyMarker(2*gspd->GetSPDsectorX0Size());
+ for(i=0;i<gspd->GetSPDsectorX0Size();i++){
+ gspd->GetSectorMountingPoints(i,x0,y0,x1,y1);
+ p.SetPoint(2*i,x0,y0);
+ p.SetPoint(2*i+1,x1,y1);
+ } // end for i
+ return kTRUE;
+}
\ No newline at end of file
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff