#include "AliMUON2DStoreValidator.h"
#include "AliMUONCalibParamNI.h"
#include "AliMUONCalibrationData.h"
+#include "AliMUONLogger.h"
+#include "AliMUONRecoParam.h"
#include "AliMUONStringIntMap.h"
+#include "AliMUONTrackerData.h"
#include "AliMUONVCalibParam.h"
#include "AliMpArea.h"
#include "AliMpArrayI.h"
+#include "AliMpCDB.h"
#include "AliMpConstants.h"
#include "AliMpDDLStore.h"
#include "AliMpDEManager.h"
#include "AliMpDetElement.h"
-#include "AliMpHVNamer.h"
+#include "AliMpDCSNamer.h"
+#include "AliMpManuIterator.h"
#include "AliMpManuUID.h"
#include "AliCDBEntry.h"
#include <Riostream.h>
#include <TArrayI.h>
#include <TExMap.h>
+#include <TFile.h>
+#include <TKey.h>
#include <TMap.h>
+#include <TROOT.h>
#include <TString.h>
+#include <TSystem.h>
/// \cond CLASSIMP
ClassImp(AliMUONPadStatusMaker)
//_____________________________________________________________________________
AliMUONPadStatusMaker::AliMUONPadStatusMaker(const AliMUONCalibrationData& calibData)
-: fCalibrationData(calibData),
- fGainA0Limits(0,1E30),
- fGainA1Limits(-1E-30,1E30),
- fGainThresLimits(0,4095),
- fHVSt12Limits(0,5000),
- fHVSt345Limits(0,5000),
- fPedMeanLimits(0,4095),
- fPedSigmaLimits(0,4095),
- fStatus(new AliMUON2DMap(true)),
- fHV(new TExMap),
- fPedestals(calibData.Pedestals()),
- fGains(calibData.Gains())
+: fkCalibrationData(calibData),
+fGainA1Limits(0,1E30),
+fGainA2Limits(-1E-30,1E30),
+fGainThresLimits(0,4095),
+fHVSt12Limits(0,5000),
+fHVSt345Limits(0,5000),
+fPedMeanLimits(0,4095),
+fPedSigmaLimits(0,4095),
+fManuOccupancyLimits(0,1.0),
+fBuspatchOccupancyLimits(0,1.0),
+fDEOccupancyLimits(0,1.0),
+fStatus(new AliMUON2DMap(true)),
+fHV(0x0),
+fPedestals(calibData.Pedestals()),
+fGains(calibData.Gains()),
+fTrackerData(0x0)
{
- /// ctor
- AliInfo(Form("ped store %s gain store %s",
- fPedestals->ClassName(),
- fGains->ClassName()));
+ /// ctor
+ if ( calibData.OccupancyMap() )
+ {
+ /// create a tracker data from the occupancy map
+ fTrackerData = new AliMUONTrackerData("OCC","OCC",*(calibData.OccupancyMap()));
+ }
+ if ( calibData.HV() )
+ {
+ /// Only create the fHV internal store if there are some HV values available
+ fHV = new TExMap;
+ }
}
//_____________________________________________________________________________
AliMUONPadStatusMaker::~AliMUONPadStatusMaker()
{
/// dtor.
+
delete fStatus;
delete fHV;
+ delete fTrackerData;
}
//_____________________________________________________________________________
AliMUONPadStatusMaker::AsString(Int_t status)
{
/// return a human readable version of the integer status
+
+ if ( status == 0 )
+ {
+ return "Brave New World";
+ }
+
Int_t pedStatus;
Int_t gainStatus;
Int_t hvStatus;
+ Int_t occStatus;
+
+ DecodeStatus(status,pedStatus,hvStatus,gainStatus,occStatus);
+
+ TString s;
+
+ if ( pedStatus & kPedMeanZero ) s += "& Ped Mean is Zero ";
+ if ( pedStatus & kPedMeanTooLow ) s += "& Ped Mean Too Low ";
+ if ( pedStatus & kPedMeanTooHigh ) s += "& Ped Mean Too High ";
+ if ( pedStatus & kPedSigmaTooLow ) s += "& Ped Sigma Too Low ";
+ if ( pedStatus & kPedSigmaTooHigh ) s += "& Ped Sigma Too High ";
+ if ( pedStatus & kPedMissing ) s += "& Ped is missing ";
+
+ if ( gainStatus & kGainA1TooLow ) s+="& Gain A1 is Too Low ";
+ if ( gainStatus & kGainA1TooHigh ) s+="& Gain A1 is Too High ";
+ if ( gainStatus & kGainA2TooLow ) s+="& Gain A2 is Too Low ";
+ if ( gainStatus & kGainA2TooHigh ) s+="& Gain A2 is Too High ";
+ if ( gainStatus & kGainThresTooLow ) s+="& Gain Thres is Too Low ";
+ if ( gainStatus & kGainThresTooHigh ) s+="& Gain Thres is Too High ";
+ if ( gainStatus & kGainMissing ) s+="& Gain is missing ";
+
+ if ( hvStatus & kHVError ) s+="& HV is on error ";
+ if ( hvStatus & kHVTooLow ) s+="& HV is Too Low ";
+ if ( hvStatus & kHVTooHigh ) s+="& HV is Too High ";
+ if ( hvStatus & kHVChannelOFF ) s+="& HV has channel OFF ";
+ if ( hvStatus & kHVSwitchOFF ) s+="& HV has switch OFF ";
+ if ( hvStatus & kHVMissing ) s+="& HV is missing ";
+
+ if ( occStatus & kManuOccupancyTooHigh ) s+="& manu occupancy too high ";
+ if ( occStatus & kManuOccupancyTooLow ) s+="& manu occupancy too low ";
+ if ( occStatus & kBusPatchOccupancyTooHigh ) s+="& bus patch occupancy too high ";
+ if ( occStatus & kBusPatchOccupancyTooLow ) s+="& bus patch occupancy too low ";
+ if ( occStatus & kDEOccupancyTooHigh ) s+="& DE occupancy too high ";
+ if ( occStatus & kDEOccupancyTooLow ) s+="& DE occupancy too low ";
- DecodeStatus(status,pedStatus,hvStatus,gainStatus);
-
-// /// Gain status
-// enum EGainStatus
-// {
-// kGainOK = 0,
-// kGainA0TooLow = (1<<1),
-// kGainA0TooHigh = (1<<2),
-// kGainA1TooLow = (1<<3),
-// kGainA1TooHigh = (1<<4),
-// kGainThresTooLow = (1<<5),
-// kGainThresTooHigh = (1<<6),
-//
-// kGainMissing = kMissing // please always use last bit for meaning "missing"
-// };
-//
-// /// Pedestal status
-// enum EPedestalStatus
-// {
-// kPedOK = 0,
-// kPedMeanZero = (1<<1),
-// kPedMeanTooLow = (1<<2),
-// kPedMeanTooHigh = (1<<3),
-// kPedSigmaTooLow = (1<<4),
-// kPedSigmaTooHigh = (1<<5),
-//
-// kPedMissing = kMissing // please always use last bit for meaning "missing"
-// };
-//
- TString s("PED ");
-
- if ( pedStatus == 0 ) s+= " OK";
- if ( pedStatus & kPedMeanZero ) s += " Mean is Zero. ";
- if ( pedStatus & kPedMeanTooLow ) s += " Mean Too Low. ";
- if ( pedStatus & kPedMeanTooHigh ) s += " Mean Too High. ";
- if ( pedStatus & kPedSigmaTooLow ) s += " Sigma Too Low. ";
- if ( pedStatus & kPedSigmaTooHigh ) s += " Sigma Too High. ";
- if ( pedStatus & kPedMissing ) s += " is missing.";
-
-// /// HV Error
-// enum EHVError
-// {
-// kHVOK = 0,
-// kHVError = (1<<0),
-// kHVTooLow = (1<<1),
-// kHVTooHigh = (1<<2),
-// kHVChannelOFF = (1<<3),
-// kHVSwitchOFF = (1<<4),
-//
-// kHVMissing = kMissing // please always use last bit for meaning "missing"
-// };
+ if ( s[0] == '&' ) s[0] = ' ';
+
+ return s;
+}
+//_____________________________________________________________________________
+TString
+AliMUONPadStatusMaker::AsCondition(Int_t mask)
+{
+ /// return a human readable version of the mask's equivalent condition
+
+ TString s(AsString(mask));
+
+ s.ReplaceAll("&","|");
+
return s;
}
Int_t
AliMUONPadStatusMaker::BuildStatus(Int_t pedStatus,
Int_t hvStatus,
- Int_t gainStatus)
+ Int_t gainStatus,
+ Int_t occStatus)
{
/// Build a complete status from specific parts (ped,hv,gain)
return ( hvStatus & 0xFF ) | ( ( pedStatus & 0xFF ) << 8 ) |
- ( ( gainStatus & 0xFF ) << 16 );
+ ( ( gainStatus & 0xFF ) << 16 ) |
+ ( ( occStatus & 0xFF ) << 24 ) ;
}
//_____________________________________________________________________________
AliMUONPadStatusMaker::DecodeStatus(Int_t status,
Int_t& pedStatus,
Int_t& hvStatus,
- Int_t& gainStatus)
+ Int_t& gainStatus,
+ Int_t& occStatus)
{
/// Decode complete status into specific parts (ped,hv,gain)
+ occStatus = ( status & 0xFF000000 ) >> 24;
gainStatus = ( status & 0xFF0000 ) >> 16;
pedStatus = ( status & 0xFF00 ) >> 8;
hvStatus = (status & 0xFF);
/// and the switch).
/// Returns false if hv switch changed during the run.
- AliCodeTimerAuto("")
+ AliCodeTimerAuto("",0)
+
+ if (!fHV) return kFALSE;
Bool_t error = kFALSE;
hvChannelTooLow = kFALSE;
hvChannelTooHigh = kFALSE;
hvChannelON = kTRUE;
- AliMpHVNamer hvNamer;
+ AliMpDCSNamer hvNamer("TRACKER");
- TString hvChannel(hvNamer.DCSHVChannelName(detElemId,sector));
+ TString hvChannel(hvNamer.DCSChannelName(detElemId,sector));
- TMap* hvMap = fCalibrationData.HV();
+ TMap* hvMap = fkCalibrationData.HV();
TPair* hvPair = static_cast<TPair*>(hvMap->FindObject(hvChannel.Data()));
if (!hvPair)
{
return error;
}
+//_____________________________________________________________________________
+Float_t
+AliMUONPadStatusMaker::SwitchValue(const TObjArray& dcsArray)
+{
+ /// Loop over the dcs value for a single switch to decide whether
+ /// we should consider it on or off
+
+ // we'll count the number of ON/OFF for this pad, to insure
+ // consistency (i.e. if status changed during the run, we should
+ // at least notify this fact ;-) and hope it's not the norm)
+ Int_t nTrue(0);
+ Int_t nFalse(0);
+ TIter next(&dcsArray);
+ AliDCSValue* val;
+
+ while ( ( val = static_cast<AliDCSValue*>(next()) ) )
+ {
+ if ( val->GetBool() )
+ {
+ ++nTrue;
+ }
+ else
+ {
+ ++nFalse;
+ }
+ }
+
+ if ( (nTrue>0 && nFalse>0) )
+ {
+ // change of state during the run, consider it off
+ return 0.0;
+ }
+
+ if ( nFalse )
+ {
+ /// switch = FALSE means the HV was flowding up to the PCB.
+ /// i.e. switch = FALSE = ON
+ return 1.0;
+ }
+
+ return 0.0;
+}
+
//_____________________________________________________________________________
Bool_t
AliMUONPadStatusMaker::HVSt345Status(Int_t detElemId, Int_t pcbIndex,
/// Returns false if something goes wrong (in particular if
/// hv switch changed during the run).
- AliCodeTimerAuto("")
+ AliCodeTimerAuto("",0)
+
+ if (!fHV) return kFALSE;
Bool_t error = kFALSE;
hvChannelTooLow = kFALSE;
hvSwitchON = kTRUE;
hvChannelON = kTRUE;
- AliMpHVNamer hvNamer;
+ AliMpDCSNamer hvNamer("TRACKER");
- TString hvChannel(hvNamer.DCSHVChannelName(detElemId));
+ TString hvChannel(hvNamer.DCSChannelName(detElemId));
- TMap* hvMap = fCalibrationData.HV();
+ TMap* hvMap = fkCalibrationData.HV();
TPair* hvPair = static_cast<TPair*>(hvMap->FindObject(hvChannel.Data()));
if (!hvPair)
}
}
- TString hvSwitch(hvNamer.DCSHVSwitchName(detElemId,pcbIndex));
+ TString hvSwitch(hvNamer.DCSSwitchName(detElemId,pcbIndex));
TPair* switchPair = static_cast<TPair*>(hvMap->FindObject(hvSwitch.Data()));
if (!switchPair)
{
}
else
{
- // we'll count the number of ON/OFF for this pad, to insure
- // consistency (i.e. if status changed during the run, we should
- // at least notify this fact ;-) and hope it's not the norm)
- Int_t nTrue(0);
- Int_t nFalse(0);
- TIter next(values);
- AliDCSValue* val;
-
- while ( ( val = static_cast<AliDCSValue*>(next()) ) )
- {
- if ( val->GetBool() )
- {
- ++nTrue;
- }
- else
- {
- ++nFalse;
- }
- }
-
- if ( (nTrue>0 && nFalse>0) )
- {
- AliWarning(Form("Status of HV Switch %s changed during this run nTrue=%d nFalse=%d! Will consider it OFF",
- hvSwitch.Data(),nTrue,nFalse));
- error = kTRUE;
- }
-
- if ( nFalse ) hvSwitchON = kFALSE;
+ Float_t sv = SwitchValue(*values);
+ if ( sv < 0.99 ) hvSwitchON = kFALSE;
}
}
return error;
{
/// Get HV status of one manu
- AliCodeTimerAuto("")
+ AliCodeTimerAuto("",0)
- if ( !fCalibrationData.HV() ) return kMissing;
+ if ( !fHV ) return kMissing;
Long_t lint = fHV->GetValue(AliMpManuUID::BuildUniqueID(detElemId,manuId));
Int_t status(0);
- AliMpHVNamer hvNamer;
+ AliMpDCSNamer hvNamer("TRACKER");
switch ( AliMpDEManager::GetStationType(detElemId) )
{
- case AliMp::kStation1:
- case AliMp::kStation2:
+ case AliMp::kStation12:
{
int sector = hvNamer.ManuId2Sector(detElemId,manuId);
if ( sector >= 0 )
AliMUONPadStatusMaker::Neighbours(Int_t detElemId, Int_t manuId) const
{
/// Get the neighbours parameters for a given manu
- AliMUONVStore* neighbourStore = fCalibrationData.Neighbours();
+ AliMUONVStore* neighbourStore = fkCalibrationData.Neighbours();
return static_cast<AliMUONVCalibParam*>(neighbourStore->FindObject(detElemId,manuId));
}
AliMUONPadStatusMaker::NeighboursStore() const
{
/// Return the store containing all the neighbours
- return fCalibrationData.Neighbours();
+ return fkCalibrationData.Neighbours();
}
//_____________________________________________________________________________
/// Compute the status of a given manu, using all available information,
/// i.e. pedestals, gains, and HV
-// AliCodeTimerAuto("")
-
-// AliCodeTimerStart("Param creation");
AliMUONVCalibParam* param = new AliMUONCalibParamNI(1,AliMpConstants::ManuNofChannels(),detElemId,manuId,-1);
fStatus->Add(param);
-// AliCodeTimerStop("Param creation");
-
-// AliCodeTimerStart("FindObject");
+
AliMUONVCalibParam* pedestals = static_cast<AliMUONVCalibParam*>(fPedestals->FindObject(detElemId,manuId));
AliMUONVCalibParam* gains = static_cast<AliMUONVCalibParam*>(fGains->FindObject(detElemId,manuId));
-// AliCodeTimerStop("FindObject");
Int_t hvStatus = HVStatus(detElemId,manuId);
-// AliCodeTimerStart("Loop");
+ Int_t occStatus = OccupancyStatus(detElemId,manuId);
for ( Int_t manuChannel = 0; manuChannel < param->Size(); ++manuChannel )
{
Float_t a1 = gains->ValueAsFloatFast(manuChannel,1);
Float_t thres = gains->ValueAsFloatFast(manuChannel,2);
- if ( a0 < fGainA0Limits.X() ) gainStatus |= kGainA0TooLow;
- else if ( a0 > fGainA0Limits.Y() ) gainStatus |= kGainA0TooHigh;
- if ( a1 < fGainA1Limits.X() ) gainStatus |= kGainA1TooLow;
- else if ( a1 > fGainA1Limits.Y() ) gainStatus |= kGainA1TooHigh;
+ if ( a0 < fGainA1Limits.X() ) gainStatus |= kGainA1TooLow;
+ else if ( a0 > fGainA1Limits.Y() ) gainStatus |= kGainA1TooHigh;
+ if ( a1 < fGainA2Limits.X() ) gainStatus |= kGainA2TooLow;
+ else if ( a1 > fGainA2Limits.Y() ) gainStatus |= kGainA2TooHigh;
if ( thres < fGainThresLimits.X() ) gainStatus |= kGainThresTooLow;
else if ( thres > fGainThresLimits.Y() ) gainStatus |= kGainThresTooHigh;
}
{
gainStatus = kGainMissing;
}
-
- Int_t status = BuildStatus(pedStatus,hvStatus,gainStatus);
+
+ Int_t status = BuildStatus(pedStatus,hvStatus,gainStatus,occStatus);
param->SetValueAsIntFast(manuChannel,0,status);
}
-// AliCodeTimerStop("Loop");
-
return param;
}
+//_____________________________________________________________________________
+Int_t
+AliMUONPadStatusMaker::OccupancyStatus(Int_t detElemId, Int_t manuId) const
+{
+ /// Get the "other" status for a given manu
+
+ Int_t rv(0);
+
+ if ( fTrackerData )
+ {
+ const Int_t occIndex = 2;
+
+ Double_t occ = fTrackerData->DetectionElement(detElemId,occIndex);
+
+ if ( occ <= fDEOccupancyLimits.X() )
+ {
+ rv |= kDEOccupancyTooLow;
+ }
+ else if ( occ > fDEOccupancyLimits.Y() )
+ {
+ rv |= kDEOccupancyTooHigh;
+ }
+
+ Int_t busPatchId = AliMpDDLStore::Instance()->GetBusPatchId(detElemId,manuId);
+
+ occ = fTrackerData->BusPatch(busPatchId,occIndex);
+
+ if ( occ <= fBuspatchOccupancyLimits.X() )
+ {
+ rv |= kBusPatchOccupancyTooLow;
+ }
+ else if ( occ > fBuspatchOccupancyLimits.Y() )
+ {
+ rv |= kBusPatchOccupancyTooHigh;
+ }
+
+ occ = fTrackerData->Manu(detElemId,manuId,occIndex);
+
+ if ( occ <= fManuOccupancyLimits.X() )
+ {
+ rv |= kManuOccupancyTooLow;
+ }
+ else if ( occ > fManuOccupancyLimits.Y() )
+ {
+ rv |= kManuOccupancyTooHigh;
+ }
+ }
+ return rv;
+}
+
//_____________________________________________________________________________
AliMUONVCalibParam*
AliMUONPadStatusMaker::PadStatus(Int_t detElemId, Int_t manuId) const
{
- /// Get the status for a given channel
+ /// Get the status container for a given manu
AliMUONVCalibParam* param = static_cast<AliMUONVCalibParam*>(fStatus->FindObject(detElemId,manuId));
if (!param)
{
// not already there, so compute it now
- AliCodeTimerAuto("ComputeStatus");
+ AliCodeTimerAuto("ComputeStatus",0);
param = ComputeStatus(detElemId,manuId);
}
return param;
/// Assign status to all manus in a given HV "zone" (defined by index, meaning
/// is different thing from St12 and St345)
- AliCodeTimerAuto("")
+ AliCodeTimerAuto("",0)
AliMpDetElement* de = AliMpDDLStore::Instance()->GetDetElement(detElemId);
fHV->Add(AliMpManuUID::BuildUniqueID(detElemId,manuId),status + 1);
}
}
+
+//_____________________________________________________________________________
+void
+AliMUONPadStatusMaker::SetLimits(const AliMUONRecoParam& recoParams)
+{
+ /// Set the limits from the recoparam
+
+ SetHVSt12Limits(recoParams.HVSt12LowLimit(),recoParams.HVSt12HighLimit());
+ SetHVSt345Limits(recoParams.HVSt345LowLimit(),recoParams.HVSt345HighLimit());
+
+ SetPedMeanLimits(recoParams.PedMeanLowLimit(),recoParams.PedMeanHighLimit());
+ SetPedSigmaLimits(recoParams.PedSigmaLowLimit(),recoParams.PedSigmaHighLimit());
+
+ SetGainA1Limits(recoParams.GainA1LowLimit(),recoParams.GainA1HighLimit());
+ SetGainA2Limits(recoParams.GainA2LowLimit(),recoParams.GainA2HighLimit());
+ SetGainThresLimits(recoParams.GainThresLowLimit(),recoParams.GainThresHighLimit());
+
+ SetManuOccupancyLimits(recoParams.ManuOccupancyLowLimit(),recoParams.ManuOccupancyHighLimit());
+ SetBuspatchOccupancyLimits(recoParams.BuspatchOccupancyLowLimit(),recoParams.BuspatchOccupancyHighLimit());
+ SetDEOccupancyLimits(recoParams.DEOccupancyLowLimit(),recoParams.DEOccupancyHighLimit());
+}
+
+//_____________________________________________________________________________
+void
+AliMUONPadStatusMaker::Report(UInt_t mask)
+{
+ /// Report the number of bad pads, according to the mask,
+ /// and the various reasons why they are bad (with occurence rates)
+
+ AliInfo("");
+ AliCodeTimerAuto("",0);
+
+ AliMUONLogger log(1064008);
+
+ Int_t nBadPads(0);
+ Int_t nPads(0);
+
+ AliMpManuIterator it;
+
+ Int_t detElemId, manuId;
+
+ while ( it.Next(detElemId,manuId) )
+ {
+ AliMpDetElement* de = AliMpDDLStore::Instance()->GetDetElement(detElemId);
+
+ for ( Int_t i = 0; i < AliMpConstants::ManuNofChannels(); ++i )
+ {
+ if ( de->IsConnectedChannel(manuId,i) )
+ {
+ ++nPads;
+
+ Int_t status = PadStatus(detElemId,manuId,i);
+
+ if ( mask && ( status & mask) ) // note that if mask == 0, all pads are good...
+ {
+ ++nBadPads;
+ log.Log(AsString(status));
+ }
+ }
+ }
+ }
+
+ TString msg;
+ Int_t ntimes;
+
+ cout << Form("According to mask %x (human readable form below) %6d pads are bad (over a total of %6d, i.e. %7.2f %%)",
+ mask,nBadPads,nPads,nPads ? nBadPads*100.0/nPads : 0.0) << endl;
+ cout << AliMUONPadStatusMaker::AsCondition(mask) << endl;
+ cout << "--------" << endl;
+
+ while ( log.Next(msg,ntimes) )
+ {
+ cout << Form("The message (%120s) occured %15d times (%7.4f %%)",msg.Data(),ntimes,ntimes*100.0/nPads) << endl;
+ }
+
+}
+
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff