+/**************************************************************************
+ * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
+ * *
+ * Author: The ALICE Off-line Project. *
+ * Contributors are mentioned in the code where appropriate. *
+ * *
+ * Permission to use, copy, modify and distribute this software and its *
+ * documentation strictly for non-commercial purposes is hereby granted *
+ * without fee, provided that the above copyright notice appears in all *
+ * copies and that both the copyright notice and this permission notice *
+ * appear in the supporting documentation. The authors make no claims *
+ * about the suitability of this software for any purpose. It is *
+ * provided "as is" without express or implied warranty. *
+ **************************************************************************/
+
// $Id$
//
// Class AliMUONSlatGeometryBuilder
// -------------------------------
// Abstract base class for geometry construction per chamber.
//
-// Author: Eric Dumonteil (dumontei@cea.fr)
+
// This Builder is designed according to the enveloppe methode. The basic idea is to be able to allow moves
#include <TGeoMatrix.h>
#include <Riostream.h>
+#include "AliRun.h"
+#include "AliLog.h"
+
#include "AliMUONSlatGeometryBuilder.h"
#include "AliMUON.h"
#include "AliMUONChamber.h"
-#include "AliMUONChamberGeometry.h"
+#include "AliMUONGeometryModule.h"
#include "AliMUONGeometryEnvelopeStore.h"
#include "AliMUONConstants.h"
-#include "AliRun.h"
ClassImp(AliMUONSlatGeometryBuilder)
//______________________________________________________________________________
AliMUONSlatGeometryBuilder::AliMUONSlatGeometryBuilder(AliMUON* muon)
: AliMUONVGeometryBuilder("slat.dat",
- &muon->Chamber(4), &muon->Chamber(5),
- &muon->Chamber(6), &muon->Chamber(7),
- &muon->Chamber(8), &muon->Chamber(9)),
+ muon->Chamber(4).GetGeometry(),
+ muon->Chamber(5).GetGeometry(),
+ muon->Chamber(6).GetGeometry(),
+ muon->Chamber(7).GetGeometry(),
+ muon->Chamber(8).GetGeometry(),
+ muon->Chamber(9).GetGeometry()),
fMUON(muon)
{
// Standard constructor
AliMUONSlatGeometryBuilder::AliMUONSlatGeometryBuilder(const AliMUONSlatGeometryBuilder& rhs)
: AliMUONVGeometryBuilder(rhs)
{
- Fatal("Copy constructor",
- "Copy constructor is not implemented.");
+ AliFatal("Copy constructor is not implemented.");
}
//______________________________________________________________________________
// check assignement to self
if (this == &rhs) return *this;
- Fatal("operator=",
- "Assignment operator is not implemented.");
+ AliFatal("Assignment operator is not implemented.");
return *this;
}
// sensitive area: 40*40 cm**2
const Float_t kSensLength = 40.;
const Float_t kSensHeight = 40.;
- const Float_t kSensWidth = 0.5; // according to TDR fig 2.120
+ const Float_t kSensWidth = AliMUONConstants::Pitch()*2;// 0.5 cm, according to TDR fig 2.120
const Int_t kSensMaterial = idGas;
// const Float_t kYoverlap = 1.5;
const Float_t kPanelHeight = kSensHeight;
const Float_t kPanelWidth = 2 * kCarbonWidth + kNomexWidth;
+ // Frame along the rounded (spacers) slats
+ const Float_t kRframeHeight = 2.00;
+
// spacer around the slat: 2 sticks along length,2 along height
// H: the horizontal ones
const Float_t kHframeLength = kPcbLength;
if (fStations[2])
{
//********************************************************************
- // Station 3 **
- //********************************************************************
- // indices 1 and 2 for first and second chambers in the station
- // iChamber (first chamber) kept for other quanties than Z,
- // assumed to be the same in both chambers
+ // Station 3 **
+ //********************************************************************
+ // indices 1 and 2 for first and second chambers in the station
+ // iChamber (first chamber) kept for other quanties than Z,
+ // assumed to be the same in both chambers
- iChamber = GetChamber(4);
+ iChamber = &fMUON->Chamber(4);
iChamber1 = iChamber;
- iChamber2 = GetChamber(5);
+ iChamber2 = &fMUON->Chamber(5);
//iChamber1->GetGeometry()->SetDebug(kTRUE);
//iChamber2->GetGeometry()->SetDebug(kTRUE);
-
+
if (gAlice->GetModule("DIPO")) {
// if DIPO is preset, the whole station will be placed in DDIP volume
iChamber1->GetGeometry()->SetMotherVolume("DDIP");
iChamber2->GetGeometry()->SetMotherVolume("DDIP");
}
-
+ if (!gAlice->GetModule("DIPO")) {
+ // Mother volume for each chamber in st3 are only defined if Dipole volue is there.
+ // Outer excess and inner recess for mother volume radius
+ // with respect to ROuter and RInner
+ Float_t dframep_in = kRframeHeight;
+ Float_t dframep_out= kVframeLength + 37.0; // Additional 37 cm gap is needed to wrap the corners of the slats
+ Float_t tpar[3];
+ Double_t dstation = ( (-iChamber2->Z()) - (-iChamber1->Z()) ) /2.1;
+ tpar[0] = iChamber1->RInner()-dframep_in;
+ tpar[1] = (iChamber1->ROuter()+dframep_out);
+ tpar[2] = dstation;
+ gMC->Gsvolu("CH05", "TUBE", idAir, tpar, 3);
+ gMC->Gsvolu("CH06", "TUBE", idAir, tpar, 3);
+ iChamber1->GetGeometry()->SetVolume("CH05");
+ iChamber2->GetGeometry()->SetVolume("CH06");
+ }
// volumes for slat geometry (xx=5,..,10 chamber id):
// Sxx0 Sxx1 Sxx2 Sxx3 --> Slat Mother volumes
// SxxG --> Sensitive volume (gas)
Float_t dzCh3 = dzCh;
Float_t zSlat3 = (i%2 ==0)? -zSlat : zSlat; // seems not that zSlat3 = zSlat4 & 5 refering to plan PQ7EN345-6 ?
- sprintf(idSlatCh5,"LA%d",kNslats3-1+i);
+ sprintf(idSlatCh5,"LA%d",i+kNslats3-1);
gMC->Gsvolu(idSlatCh5,"BOX",kSlatMaterial,spar2,3);
- detElemId = 500 + i + kNslats3-1;
+ detElemId = 509 - (i + kNslats3-1-4);
GetEnvelopes(4)->AddEnvelope(idSlatCh5, detElemId, true, TGeoTranslation(xSlat3, ySlat3, -zSlat3 + dzCh3),
TGeoRotation("rot1",90,angle,90,90+angle,0,0) );
sprintf(idSlatCh5,"LA%d",3*kNslats3-2+i);
gMC->Gsvolu(idSlatCh5,"BOX",kSlatMaterial,spar2,3);
- detElemId = 550 + i + kNslats3-1;
+ detElemId = 500 + (i + kNslats3-1-4);
GetEnvelopes(4)->AddEnvelope(idSlatCh5, detElemId, true, TGeoTranslation(-xSlat3, ySlat3, zSlat3 - dzCh3),
TGeoRotation("rot2",90,180+angle,90,90+angle,180,0) );
if (i > 0) {
sprintf(idSlatCh5,"LA%d",kNslats3-1-i);
gMC->Gsvolu(idSlatCh5,"BOX",kSlatMaterial,spar2,3);
- detElemId = 500 - i + kNslats3-1;
+ detElemId = 509 + (i + kNslats3-1-4);
GetEnvelopes(4)->AddEnvelope(idSlatCh5, detElemId, true, TGeoTranslation(xSlat3, -ySlat3, -zSlat3 + dzCh3),
TGeoRotation("rot3",90,angle,90,270+angle,180,0) );
sprintf(idSlatCh5,"LA%d",3*kNslats3-2-i);
gMC->Gsvolu(idSlatCh5,"BOX",kSlatMaterial,spar2,3);
- detElemId = 550 - i + kNslats3-1;
+ detElemId = 518 - (i + kNslats3-1-4);
GetEnvelopes(4)->AddEnvelope(idSlatCh5, detElemId, true, TGeoTranslation(-xSlat3, -ySlat3, zSlat3 - dzCh3),
TGeoRotation("rot4",90,180+angle,90,270+angle,0,0) );
}
sprintf(idSlatCh6,"LB%d",kNslats3-1+i);
gMC->Gsvolu(idSlatCh6,"BOX",kSlatMaterial,spar,3);
- detElemId = 600 + i + kNslats3-1;
+ detElemId = 609 - (i + kNslats3-1-4);
GetEnvelopes(5)->AddEnvelope(idSlatCh6, detElemId, true, TGeoTranslation(xSlat3, ySlat3, -zSlat3 + dzCh3),
TGeoRotation("rot5",90,angle,90,90+angle,0,0) );
sprintf(idSlatCh6,"LB%d",3*kNslats3-2+i);
gMC->Gsvolu(idSlatCh6,"BOX",kSlatMaterial,spar,3);
- detElemId = 650 + i + kNslats3-1;
+ detElemId = 600 + (i + kNslats3-1-4);
GetEnvelopes(5)->AddEnvelope(idSlatCh6, detElemId, true, TGeoTranslation(-xSlat3, ySlat3, zSlat3 - dzCh3),
TGeoRotation("rot6",90,180+angle,90,90+angle,180,0) );
if (i > 0) {
sprintf(idSlatCh6,"LB%d",kNslats3-1-i);
gMC->Gsvolu(idSlatCh6,"BOX",kSlatMaterial,spar,3);
- detElemId = 600 - i + kNslats3-1;
+ detElemId = 609 + (i + kNslats3-1-4);
GetEnvelopes(5)->AddEnvelope(idSlatCh6, detElemId, true, TGeoTranslation(xSlat3, -ySlat3, -zSlat3 + dzCh3),
TGeoRotation("rot7",90,angle,90,270+angle,180,0) );
sprintf(idSlatCh6,"LB%d",3*kNslats3-2-i);
gMC->Gsvolu(idSlatCh6,"BOX",kSlatMaterial,spar,3);
- detElemId = 650 - i + kNslats3-1;
+ detElemId = 618 - (i + kNslats3-1-4);
GetEnvelopes(5)->AddEnvelope(idSlatCh6, detElemId, true, TGeoTranslation(-xSlat3, -ySlat3, zSlat3 - dzCh3),
TGeoRotation("rot8",90,180+angle,90,270+angle,0,0) );
}
Double_t divpar[3];
Double_t dydiv = kSensHeight/ndiv;
Double_t ydiv = (kSensHeight - dydiv)/2.;
- Double_t rmin = 31.5; // Corrected in sep04 from PQ-LAT-SR2 de CEA-DSM-DAPNIA-SIS/BE ph HARDY 19-Oct-2002 slat
+ Double_t rmin = iChamber1->RInner();// Same radius for both chamber in St3
Double_t xdiv = 0.;
Float_t xvol;
Float_t yvol;
for (Int_t idiv = 0; idiv < ndiv; idiv++){
ydiv += dydiv;
xdiv = 0.;
- if (ydiv < rmin) xdiv = rmin * TMath::Sin( TMath::ACos(ydiv/rmin) );
+ if (ydiv < rmin) xdiv = rmin * TMath::Sin( TMath::ACos((ydiv-dydiv/2.)/rmin) );
divpar[0] = (kPcbLength - xdiv)/2.;
divpar[1] = dydiv/2. - epsilon;
divpar[2] = kSensWidth/2.;
// 9 box volumes are used to define the PCB closed to the beam pipe of the slat 122000SR1 of chamber 5 and 6 of St3
// Accordingly to plan PQ-LAT-SR1 of CEA-DSM-DAPNIA-SIS/BE ph HARDY 8-Oct-2002
// Rmin = 31.5 cm
- rmin = 31.5; //in cm
+ rmin = iChamber1->RInner(); // Same radius for both chamber in St3
ndiv = 9;
dydiv = kSensHeight/ndiv; // Vertical size of the box volume approximating the rounded PCB
ydiv = -kSensHeight/2 + dydiv/2.; // Initializing vertical position of the volume from bottom
// // assumed to be the same in both chambers
// corrected geometry (JP. Cussonneau, Ch. Finck)
- iChamber = GetChamber(6);
+ iChamber = &fMUON->Chamber(6);
iChamber1 = iChamber;
- iChamber2 = GetChamber(7);
+ iChamber2 = &fMUON->Chamber(7);
const Int_t kNslats4 = 7; // number of slats per quadrant
const Int_t kNPCB4[kNslats4] = {5, 6, 5, 5, 4, 3, 2}; // n PCB per slat
Float_t slatLength4[kNslats4];
+
+ // Mother volume for each chamber
+ // Outer excess and inner recess for mother volume radius
+ // with respect to ROuter and RInner
+ Float_t dframep_in = kRframeHeight;
+ Float_t dframep_out= kVframeLength + 40.0; // Additional 30 cm gap is needed to wrap the corners of the slats
+ Float_t tpar[3];
+ Double_t dstation = ( (-iChamber2->Z()) - (-iChamber1->Z()) ) /2.1;
+ tpar[0] = iChamber1->RInner()-dframep_in;
+ tpar[1] = (iChamber1->ROuter()+dframep_out);
+ tpar[2] = dstation;
+ gMC->Gsvolu("CH07", "TUBE", idAir, tpar, 3);
+ gMC->Gsvolu("CH08", "TUBE", idAir, tpar, 3);
+ iChamber1->GetGeometry()->SetVolume("CH07");
+ iChamber2->GetGeometry()->SetVolume("CH08");
+
// create and position the slat (mother) volumes
char idSlatCh7[5];
sprintf(idSlatCh7,"LC%d",kNslats4-1+i);
gMC->Gsvolu(idSlatCh7,"BOX",kSlatMaterial,spar,3);
- detElemId = 700 + i + kNslats4-1;
+ detElemId = 713 - (i + kNslats4-1-6);
GetEnvelopes(6)->AddEnvelope(idSlatCh7, detElemId, true, TGeoTranslation(xSlat4, ySlat41, -zSlat4 + dzCh4),
TGeoRotation("rot1",90,angle,90,90+angle,0,0) );
sprintf(idSlatCh7,"LC%d",3*kNslats4-2+i);
gMC->Gsvolu(idSlatCh7,"BOX",kSlatMaterial,spar,3);
- detElemId = 750 + i + kNslats4-1;
+ detElemId = 700 + (i + kNslats4-1-6);
GetEnvelopes(6)->AddEnvelope(idSlatCh7, detElemId, true, TGeoTranslation(-xSlat4, ySlat41, zSlat4 - dzCh4),
TGeoRotation("rot2",90,180+angle,90,90+angle,180,0) );
if (i > 0) {
sprintf(idSlatCh7,"LC%d",kNslats4-1-i);
gMC->Gsvolu(idSlatCh7,"BOX",kSlatMaterial,spar,3);
- detElemId = 700 - i + kNslats4-1;
+ detElemId = 713 + (i + kNslats4-1-6);
GetEnvelopes(6)->AddEnvelope(idSlatCh7, detElemId, true, TGeoTranslation(xSlat4, -ySlat41, -zSlat4 + dzCh4),
TGeoRotation("rot3",90,angle,90,270+angle,180,0) );
sprintf(idSlatCh7,"LC%d",3*kNslats4-2-i);
- detElemId = 750 - i + kNslats4-1;
+ detElemId = 726 - (i + kNslats4-1-6);
gMC->Gsvolu(idSlatCh7,"BOX",kSlatMaterial,spar,3);
GetEnvelopes(6)->AddEnvelope(idSlatCh7, detElemId, true,
TGeoTranslation(-xSlat4, -ySlat41, zSlat4 - dzCh4),
sprintf(idSlatCh8,"LD%d",kNslats4-1+i);
gMC->Gsvolu(idSlatCh8,"BOX",kSlatMaterial,spar,3);
- detElemId = 800 + i + kNslats4-1;
+ detElemId = 813 - (i + kNslats4-1-6);
GetEnvelopes(7)->AddEnvelope(idSlatCh8, detElemId, true, TGeoTranslation(xSlat4, ySlat42, -zSlat4 + dzCh4),
TGeoRotation("rot5",90,angle,90,90+angle,0,0) );
sprintf(idSlatCh8,"LD%d",3*kNslats4-2+i);
- detElemId = 850 + i + kNslats4-1;
+ detElemId = 800 + (i + kNslats4-1-6);
gMC->Gsvolu(idSlatCh8,"BOX",kSlatMaterial,spar,3);
GetEnvelopes(7)->AddEnvelope(idSlatCh8, detElemId, true, TGeoTranslation(-xSlat4, ySlat42, zSlat4 - dzCh4),
TGeoRotation("rot6",90,180+angle,90,90+angle,180,0) );
if (i > 0) {
sprintf(idSlatCh8,"LD%d",kNslats4-1-i);
- detElemId = 800 - i + kNslats4-1;
+ detElemId = 813 + (i + kNslats4-1-6);
gMC->Gsvolu(idSlatCh8,"BOX",kSlatMaterial,spar,3);
GetEnvelopes(7)->AddEnvelope(idSlatCh8, detElemId, true, TGeoTranslation(xSlat4, -ySlat42, -zSlat4 + dzCh4),
TGeoRotation("rot7",90,angle,90,270+angle,180,0) );
sprintf(idSlatCh8,"LD%d",3*kNslats4-2-i);
- detElemId = 850 - i + kNslats4-1;
+ detElemId = 826 - (i + kNslats4-1-6);
gMC->Gsvolu(idSlatCh8,"BOX",kSlatMaterial,spar,3);
GetEnvelopes(7)->AddEnvelope(idSlatCh8, detElemId, true, TGeoTranslation(-xSlat4, -ySlat42, zSlat4 - dzCh4),
TGeoRotation("rot8",90,180+angle,90,270+angle,0,0) );
Double_t divpar[3];
Double_t dydiv = kSensHeight/ndiv;
Double_t ydiv = (kSensHeight - dydiv)/2.;
- Float_t rmin = 39.5;// Corrected in sep04 from PQ-LAT-NR3 de CEA-DSM-DAPNIA-SIS/BE ph HARDY 19-Oct-2002 slat
+ Float_t rmin = iChamber1->RInner(); // Same radius for both chamber of St4
Float_t xdiv = 0.;
Float_t xvol;
Float_t yvol;
for (Int_t idiv = 0; idiv < ndiv; idiv++){
ydiv += dydiv;
xdiv = 0.;
- if (ydiv < rmin) xdiv = rmin * TMath::Sin( TMath::ACos(ydiv/rmin) );
+ if (ydiv < rmin) xdiv = rmin * TMath::Sin( TMath::ACos((ydiv-dydiv/2.)/rmin) );
divpar[0] = (kPcbLength - xdiv)/2.;
divpar[1] = dydiv/2. - epsilon;
divpar[2] = kSensWidth/2.;
// // assumed to be the same in both chambers
// corrected geometry (JP. Cussonneau, Ch. Finck)
- iChamber = GetChamber(8);
+ iChamber = &fMUON->Chamber(8);
iChamber1 = iChamber;
- iChamber2 = GetChamber(9);
+ iChamber2 = &fMUON->Chamber(9);
const Int_t kNslats5 = 7; // number of slats per quadrant
const Int_t kNPCB5[kNslats5] = {5, 6, 6, 6, 5, 4, 3}; // n PCB per slat
const Float_t kYpos5[kNslats5] = {0., 38.2, 37.9, 37.6, 37.3, 37.05, 36.75};
Float_t slatLength5[kNslats5];
+ // Mother volume for each chamber
+ // Outer excess and inner recess for mother volume radius
+ // with respect to ROuter and RInner
+ Float_t dframep_in = kRframeHeight;
+ Float_t dframep_out= kVframeLength + 40.0; // Additional 40 cm gap is needed to wrap the corners of the slats
+ Float_t tpar[3];
+ Double_t dstation = ( (-iChamber2->Z()) - (-iChamber1->Z()) ) /2.3;
+ tpar[0] = iChamber1->RInner()-dframep_in;
+ tpar[1] = (iChamber1->ROuter()+dframep_out);
+ tpar[2] = dstation;
+ gMC->Gsvolu("CH09", "TUBE", idAir, tpar, 3);
+ gMC->Gsvolu("CH10", "TUBE", idAir, tpar, 3);
+ iChamber1->GetGeometry()->SetVolume("CH09");
+ iChamber2->GetGeometry()->SetVolume("CH10");
+
// create and position the slat (mother) volumes
char idSlatCh9[5];
Float_t zSlat5 = (i%2 ==0)? -zSlat : zSlat;
sprintf(idSlatCh9,"LE%d",kNslats5-1+i);
- detElemId = 900 + i + kNslats5-1;
+ detElemId = 913 - (i + kNslats5-1-6);
gMC->Gsvolu(idSlatCh9,"BOX",kSlatMaterial,spar,3);
GetEnvelopes(8)->AddEnvelope(idSlatCh9, detElemId, true, TGeoTranslation(xSlat5, ySlat5, -zSlat5 + dzCh5),
TGeoRotation("rot1",90,angle,90,90+angle,0,0) );
sprintf(idSlatCh9,"LE%d",3*kNslats5-2+i);
- detElemId = 950 + i + kNslats5-1;
+ detElemId = 900 + (i + kNslats5-1-6);
gMC->Gsvolu(idSlatCh9,"BOX",kSlatMaterial,spar,3);
GetEnvelopes(8)->AddEnvelope(idSlatCh9, detElemId, true, TGeoTranslation(-xSlat5, ySlat5, zSlat5 - dzCh5),
TGeoRotation("rot2",90,180+angle,90,90+angle,180,0) );
if (i > 0) {
sprintf(idSlatCh9,"LE%d",kNslats5-1-i);
- detElemId = 900 - i + kNslats5-1;
+ detElemId = 913 + (i + kNslats5-1-6);
gMC->Gsvolu(idSlatCh9,"BOX",kSlatMaterial,spar,3);
GetEnvelopes(8)->AddEnvelope(idSlatCh9, detElemId, true, TGeoTranslation(xSlat5, -ySlat5, -zSlat5 + dzCh5),
TGeoRotation("rot3",90,angle,90,270+angle,180,0) );
sprintf(idSlatCh9,"LE%d",3*kNslats5-2-i);
- detElemId = 950 - i + kNslats5-1;
+ detElemId = 926 - (i + kNslats5-1-6);
gMC->Gsvolu(idSlatCh9,"BOX",kSlatMaterial,spar,3);
GetEnvelopes(8)->AddEnvelope(idSlatCh9, detElemId, true, TGeoTranslation(-xSlat5, -ySlat5, zSlat5 - dzCh5),
TGeoRotation("rot4",90,180+angle,90,270+angle,0,0) );
}
sprintf(idSlatCh10,"LF%d",kNslats5-1+i);
- detElemId = 1000 + i + kNslats5-1;
+ detElemId = 1013 - (i + kNslats5-1-6);
gMC->Gsvolu(idSlatCh10,"BOX",kSlatMaterial,spar,3);
GetEnvelopes(9)->AddEnvelope(idSlatCh10, detElemId, true, TGeoTranslation(xSlat5, ySlat5, -zSlat5 + dzCh5),
TGeoRotation("rot5",90,angle,90,90+angle,0,0) );
sprintf(idSlatCh10,"LF%d",3*kNslats5-2+i);
- detElemId = 1050 + i + kNslats5-1;
+ detElemId = 1000 + (i + kNslats5-1-6);
gMC->Gsvolu(idSlatCh10,"BOX",kSlatMaterial,spar,3);
GetEnvelopes(9)->AddEnvelope(idSlatCh10, detElemId, true, TGeoTranslation(-xSlat5, ySlat5, zSlat5 - dzCh5),
TGeoRotation("rot6",90,180+angle,90,90+angle,180,0) );
if (i > 0) {
sprintf(idSlatCh10,"LF%d",kNslats5-1-i);
- detElemId = 1000 - i + kNslats5-1;
+ detElemId = 1013 + (i + kNslats5-1-6);
gMC->Gsvolu(idSlatCh10,"BOX",kSlatMaterial,spar,3);
GetEnvelopes(9)->AddEnvelope(idSlatCh10, detElemId, true, TGeoTranslation(xSlat5, -ySlat5, -zSlat5 + dzCh5),
TGeoRotation("rot7",90,angle,90,270+angle,180,0) );
sprintf(idSlatCh10,"LF%d",3*kNslats5-2-i);
- detElemId = 1050 - i + kNslats5-1;
+ detElemId = 1026 - (i + kNslats5-1-6);
gMC->Gsvolu(idSlatCh10,"BOX",kSlatMaterial,spar,3);
GetEnvelopes(9)->AddEnvelope(idSlatCh10, detElemId, true, TGeoTranslation(-xSlat5, -ySlat5, zSlat5 - dzCh5),
TGeoRotation("rot8",90,180+angle,90,270+angle,0,0) );
Double_t divpar[3];
Double_t dydiv = kSensHeight/ndiv;
Double_t ydiv = (kSensHeight - dydiv)/2.;
- Float_t rmin = 39.5;
+ Float_t rmin = iChamber1->RInner();
Float_t xdiv = 0.;
Float_t xvol;
Float_t yvol;
for (Int_t idiv = 0; idiv < ndiv; idiv++){
ydiv += dydiv;
xdiv = 0.;
- if (ydiv < rmin) xdiv = rmin * TMath::Sin( TMath::ACos(ydiv/rmin) );
+ if (ydiv < rmin) xdiv = rmin * TMath::Sin( TMath::ACos((ydiv-dydiv/2.)/rmin) );
divpar[0] = (kPcbLength - xdiv)/2.;
divpar[1] = dydiv/2. - epsilon;
divpar[2] = kSensWidth/2.;
// Defines the transformations for the station2 chambers.
// ---
- AliMUONChamber* iChamber1 = GetChamber(4);
+ AliMUONChamber* iChamber1 = &fMUON->Chamber(4);
Double_t zpos1 = - iChamber1->Z();
iChamber1->GetGeometry()
->SetTranslation(TGeoTranslation(0., 0., zpos1));
- AliMUONChamber* iChamber2 = GetChamber(5);
+ AliMUONChamber* iChamber2 = &fMUON->Chamber(5);
Double_t zpos2 = - iChamber2->Z();
iChamber2->GetGeometry()
->SetTranslation(TGeoTranslation(0., 0., zpos2));
- iChamber1 = GetChamber(6);
+ iChamber1 = &fMUON->Chamber(6);
zpos1 = - iChamber1->Z();
iChamber1->GetGeometry()
->SetTranslation(TGeoTranslation(0., 0., zpos1));
- iChamber2 = GetChamber(7);
+ iChamber2 = &fMUON->Chamber(7);
zpos2 = - iChamber2->Z();
iChamber2->GetGeometry()
->SetTranslation(TGeoTranslation(0., 0., zpos2));
- iChamber1 = GetChamber(8);
+ iChamber1 = &fMUON->Chamber(8);
zpos1 = - iChamber1->Z();
iChamber1->GetGeometry()
->SetTranslation(TGeoTranslation(0., 0., zpos1));
- iChamber2 = GetChamber(9);
+ iChamber2 = &fMUON->Chamber(9);
zpos2 = - iChamber2->Z();
iChamber2->GetGeometry()
->SetTranslation(TGeoTranslation(0., 0., zpos2));
// Defines the sensitive volumes for slat stations chambers.
// ---
- GetChamber(4)->GetGeometry()->SetSensitiveVolume("S05G");
- GetChamber(5)->GetGeometry()->SetSensitiveVolume("S06G");
- GetChamber(6)->GetGeometry()->SetSensitiveVolume("S07G");
- GetChamber(7)->GetGeometry()->SetSensitiveVolume("S08G");
- GetChamber(8)->GetGeometry()->SetSensitiveVolume("S09G");
- GetChamber(9)->GetGeometry()->SetSensitiveVolume("S10G");
+ GetGeometry(4)->SetSensitiveVolume("S05G");
+ GetGeometry(5)->SetSensitiveVolume("S06G");
+ GetGeometry(6)->SetSensitiveVolume("S07G");
+ GetGeometry(7)->SetSensitiveVolume("S08G");
+ GetGeometry(8)->SetSensitiveVolume("S09G");
+ GetGeometry(9)->SetSensitiveVolume("S10G");
}
//______________________________________________________________________________
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff