**************************************************************************/
// $Id$
-//
+
+//-----------------------------------------------------------------------------
// Class AliMUONSt2GeometryBuilderV2
-// -------------------------------
+// ---------------------------------
// MUON Station2 coarse geometry construction class.
-//********************************************************************
// Author: SANJOY PAL ,Prof. SUKALYAN CHATTOPADHAYAY [SINP, KOLKATA]
// & Dr.SHAKEEL AHMAD (AMU), INDIA
-//********************************************************************
+//-----------------------------------------------------------------------------
#include <TVirtualMC.h>
//______________________________________________________________________________
AliMUONSt2GeometryBuilderV2::AliMUONSt2GeometryBuilderV2(AliMUON* muon)
- : AliMUONVGeometryBuilder(2, 3),
+ : AliMUONVGeometryBuilder(2, 2),
fMUON(muon)
{
-// Standard constructor
+/// Standard constructor
}
: AliMUONVGeometryBuilder(),
fMUON(0)
{
-// Default constructor
-}
-
-
-//______________________________________________________________________________
-AliMUONSt2GeometryBuilderV2::AliMUONSt2GeometryBuilderV2(const AliMUONSt2GeometryBuilderV2& rhs)
- : AliMUONVGeometryBuilder(rhs)
-{
-// Protected copy constructor
-
- AliFatal("Copy constructor is not implemented.");
+/// Default constructor
}
//______________________________________________________________________________
-AliMUONSt2GeometryBuilderV2::~AliMUONSt2GeometryBuilderV2() {
-//
-}
-
-//______________________________________________________________________________
-AliMUONSt2GeometryBuilderV2&
-AliMUONSt2GeometryBuilderV2::operator = (const AliMUONSt2GeometryBuilderV2& rhs)
+AliMUONSt2GeometryBuilderV2::~AliMUONSt2GeometryBuilderV2()
{
-// Protected assignement operator
-
- // check assignement to self
- if (this == &rhs) return *this;
-
- AliFatal("Assignment operator is not implemented.");
-
- return *this;
+/// Destructor
}
//
//______________________________________________________________________________
void AliMUONSt2GeometryBuilderV2::CreateGeometry()
{
+/// Geometry construction
//
//********************************************************************
gMC->Gsvolu("SQM4","TUBS", idAir, tpar1, 5);
-
//==================================================================================
-// Plane
+// Plane
//==================================================================================
//Thickness of variour parts
- Float_t zCbb = 0.04; //cathode pcb
- Float_t zCu = 0.004; // eff. cu in cathode pcb
- Float_t zRoha = 2.5; // Rhocell
- Float_t zMeb = 0.08; //Mech. exit board
- Float_t zEeb = 0.02; //Effective electronic exit board
- //Z-positions of various parts--- in Plane-1
-
- Float_t zposCbb = 0.25; // 2.5 mm => gap between anode & chatode plane
- Float_t zposCu =zposCbb + zCbb;
- Float_t zposRoha =zposCu + zCu;
- Float_t zposMeb =zposRoha + zRoha;
- Float_t zposEeb =zposMeb + zMeb;
-
- Float_t zposCbbBar = zposCbb + zCbb/2.; //for segment 0 & 6
- Float_t zposCuBar = zCbb/2. + zCu/2.;
- Float_t zposRohaBar = zCu/2. + zRoha/2.;
- Float_t zposMebBar = zRoha/2. + zMeb/2.;
- Float_t zposEebBar = zMeb/2. + zEeb/2.;
+ Float_t zCu = 0.005; // eff. cu in cathode pcb
+ Float_t zCbb = 0.04; //cathode pcb
+ Float_t zRoha = 2.5; // Rhocell
+ Float_t zMeb = 0.04; //Mech. exit board //0.08
+ Float_t zEeb = 0.04; //Effective electronic readout board //0.02
+
+ //starting Z-positions of various parts--- in Plane-1
+ Float_t zposCu = 0.25; // 2.5 mm => gap between anode & chatode plane
+ Float_t zposCbb = zposCu + zCu;
+ Float_t zposRoha = zposCbb + zCbb;
+ Float_t zposMeb = zposRoha + zRoha;
+ Float_t zposEeb = zposMeb + zMeb;
+
+ Float_t zposCuBar = zposCu + zCu/2.; //for segment 0 & 6
+ Float_t zposCbbBar = zposCbb + zCbb/2.;
+ Float_t zposRohaBar = zposRoha + zRoha/2.;
+ Float_t zposMebBar = zposMeb + zMeb/2.;
+ Float_t zposEebBar = zposEeb + zEeb/2.;
//Cathode PCB + Copper sheet + Rohacell + mech exit board + eff. electronic exit board
//Segment-0 ~~~Horizantal box ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- Float_t bparH[3];
- bparH[0] = 94.5/2.; // extension beyond 0 deg in x direction
- bparH[1] = 1.2/2.; // extension beyond 0 deg in y direction (3.7[total extn] - 2.5[frame dim])
- bparH[2] = zCbb/2.; // thickness of cathode sheet in z direction
- gMC->Gsvolu("CB0L", "BOX", idPCB, bparH, 3);
-
- bparH[2] = zCu/2.; //Thickness of Copper sheet
- gMC->Gsvolu("CU0L", "BOX", idCU, bparH, 3);
-
- bparH[2] = zRoha/2.; //Thickness of Roha cell
- gMC->Gsvolu("RH0L", "BOX", idRoha, bparH, 3);
-
- bparH[2] = zMeb/2; //Thickness of mechanical exit board
- gMC->Gsvolu("MB0L", "BOX", idPCB, bparH, 3);
-
- bparH[2] = zEeb/2; //Thickness of effective electronic exit board
- gMC->Gsvolu("EB0L", "BOX", idCU, bparH, 3);
+ Float_t bparH[3];
+ bparH[0] = 95.5/2.; // extension beyond 0 deg in x direction // 94.5
+ bparH[1] = 1.2/2.; // extension beyond 0 deg in y direction (3.7[total extn] - 2.5[frame dim])
+ bparH[2] = zCu/2.; //Thickness of Copper sheet
+ gMC->Gsvolu("SCU0L", "BOX", idCU, bparH, 3);
+
+ bparH[2] = zCbb/2.; // thickness of cathode sheet in z direction
+ gMC->Gsvolu("SCB0L", "BOX", idPCB, bparH, 3);
+
+ bparH[2] = zRoha/2.; //Thickness of Roha cell
+ gMC->Gsvolu("SRH0L", "BOX", idRoha, bparH, 3);
- //Segment-1 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- Float_t pgpar[10]; // polygon
- pgpar[0] = 0.; // initial angle
- pgpar[1] = 90.; // increment in angle starting from initial angle
- pgpar[2] = 5; // number of side
- pgpar[3] = 2.; // number of plane
- pgpar[4] = 0.; // z-position of the first plane
- pgpar[5] = 23.1; // innner radius first plane
- pgpar[6] = 117.6; // outer radious first plane
- pgpar[7] = pgpar[4] + zCbb; // z-position of the second plane
- pgpar[8] = pgpar[5]; // innner radius of second plane
- pgpar[9] = pgpar[6]; // outer radious of second plane
- gMC->Gsvolu("CB1L", "PGON", idPCB, pgpar, 10);
-
- pgpar[7] = pgpar[4] + zCu; // Thickness of copper-sheet
- gMC->Gsvolu("CU1L", "PGON", idCU, pgpar, 10);
-
- pgpar[7] = pgpar[4] + zRoha; // Thickness of Roha cell
- gMC->Gsvolu("RH1L", "PGON", idRoha, pgpar, 10);
-
- pgpar[7] = pgpar[4] + zMeb; // Thickness of mechanical exit board
- gMC->Gsvolu("MB1L", "PGON", idPCB, pgpar, 10);
+ bparH[2] = zMeb/2; //Thickness of mechanical exit board
+ gMC->Gsvolu("SMB0L", "BOX", idPCB, bparH, 3);
+
+ bparH[2] = zEeb/2; //Thickness of effective electronic exit board
+ gMC->Gsvolu("SEB0L", "BOX", idCU, bparH, 3);
+
+ //Segment-1 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ Float_t pgpar[10]; // polygon
+ pgpar[0] = 0.; // initial angle
+ pgpar[1] = 90.; // increment in angle starting from initial angle
+ pgpar[2] = 5; // number of side
+ pgpar[3] = 2.; // number of plane
+ pgpar[4] = -zCu/2.; // z-position of the first plane
+ pgpar[5] = 23.1; // innner radius first plane
+ pgpar[6] = 117.6; // outer radious first plane
+ pgpar[7] = zCu/2.; // z-position of the second plane
+ pgpar[8] = pgpar[5]; // innner radius of second plane
+ pgpar[9] = pgpar[6]; // outer radious of second plane
+ gMC->Gsvolu("SCU1L", "PGON", idCU, pgpar, 10);
+
+ pgpar[4] = -zCbb/2.; // z-position of the first plane
+ pgpar[7] = zCbb/2.; // Thickness of copper-sheet
+ gMC->Gsvolu("SCB1L", "PGON", idPCB, pgpar, 10);
+
+ pgpar[4] = -zRoha/2.; // Thickness of Roha cell
+ pgpar[7] = zRoha/2.; // Thickness of Roha cell
+ gMC->Gsvolu("SRH1L", "PGON", idRoha, pgpar, 10);
- pgpar[7] = pgpar[4] + zEeb; // Thickness of electronic exit board
- gMC->Gsvolu("EB1L", "PGON", idCU, pgpar, 10);
+ pgpar[4] = -zMeb/2.; // Thickness of mechanical exit board
+ pgpar[7] = zMeb/2.; // Thickness of mechanical exit board
+ gMC->Gsvolu("SMB1L", "PGON", idPCB, pgpar, 10);
+
+ pgpar[4] = -zEeb/2.; // Thickness of electronic readout board
+ pgpar[7] = zEeb/2.; // Thickness of electronic readout board
+ gMC->Gsvolu("SEB1L", "PGON", idCU, pgpar, 10);
//Segment-2 - vertical box (simalar to horizontal bar as in Segment 0)~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- Float_t bparV[3];
-
- bparV[0] = 1.0/2.;
- bparV[1] = 94.5/2.;
- bparV[2] = zCbb/2.;
- gMC->Gsvolu("CB2L", "BOX", idPCB, bparV, 3);
-
- bparV[2] = zCu/2.;
- gMC->Gsvolu("CU2L", "BOX", idCU, bparV, 3);
-
- bparV[2] = zRoha/2.;
- gMC->Gsvolu("RH2L", "BOX", idRoha, bparV, 3);
-
- bparV[2] = zMeb/2;
- gMC->Gsvolu("MB2L", "BOX", idPCB, bparV, 3);
-
- bparV[2] = zEeb/2;
- gMC->Gsvolu("EB2L", "BOX", idCU, bparV, 3);
-
-//....(Setting posion of Segment 0,1,2)..................................................................
-
- Float_t xposHorBox = bparH[0] + 23.1; // 23.1 = 20.6(inner radius of qrd) + 2.5 (width of frame)
- Float_t yposHorBox = -bparH[1];
+ Float_t bparV[3];
+
+ bparV[0] = 1.0/2.;
+ bparV[1] = 95.5/2.; // 94.5
+ bparV[2] = zCu/2.;
+ gMC->Gsvolu("SCU2L", "BOX", idCU, bparV, 3);
+
+ bparV[2] = zCbb/2.;
+ gMC->Gsvolu("SCB2L", "BOX", idPCB, bparV, 3);
+
+
+ bparV[2] = zRoha/2.;
+ gMC->Gsvolu("SRH2L", "BOX", idRoha, bparV, 3);
+
+ bparV[2] = zMeb/2;
+ gMC->Gsvolu("SMB2L", "BOX", idPCB, bparV, 3);
+
+ bparV[2] = zEeb/2;
+ gMC->Gsvolu("SEB2L", "BOX", idCU, bparV, 3);
- Float_t xposVerBox = -bparV[0];
- Float_t yposVerBox = bparV[1] + 23.1;
-
-
-
-//Positioning the PCB
-//
-
- // chamber 3
- gMC->Gspos("CB0L",1, "SQM3",xposHorBox,yposHorBox,zposCbbBar,0, "ONLY");// box horizontal
- gMC->Gspos("CB1L",1, "SQM3", 0.0,0.0,zposCbb,0, "ONLY");
- gMC->Gspos("CB2L",1, "SQM3",xposVerBox,yposVerBox,zposCbbBar,0, "ONLY");// box vertical
-
- gMC->Gspos("CB0L",2, "SQM3",xposHorBox,yposHorBox,-zposCbbBar,0, "ONLY");// box horizontal
- gMC->Gspos("CB1L",2, "SQM3", 0.0,0.0,-(zposCbb+ zCbb),0, "ONLY");
- gMC->Gspos("CB2L",2, "SQM3",xposVerBox,yposVerBox,zposCbbBar,0, "ONLY");// box vertical
-
- // chamber 4
- gMC->Gspos("CB0L",3, "SQM4",xposHorBox,yposHorBox,zposCbbBar,0, "ONLY");
- gMC->Gspos("CB1L",3, "SQM4", 0.0,0.0,zposCbb,0, "ONLY");
- gMC->Gspos("CB2L",3, "SQM4",xposVerBox,yposVerBox,zposCbbBar,0, "ONLY");
-
- gMC->Gspos("CB0L",4, "SQM4",xposHorBox,yposHorBox,-zposCbbBar,0, "ONLY");
- gMC->Gspos("CB1L",4, "SQM4", 0.0,0.0,-(zposCbb+ zCbb),0, "ONLY");
- gMC->Gspos("CB2L",4, "SQM4",xposVerBox,yposVerBox,zposCbbBar,0, "ONLY");
-
-
-//Positioning Copper sheet
-
- // chamber 3
-
- gMC->Gspos("CU0L",1, "SQM3",xposHorBox,yposHorBox,zposCuBar,0, "ONLY");
- gMC->Gspos("CU1L",1, "SQM3", 0.0,0.0,zposCu,0, "ONLY");
- gMC->Gspos("CU2L",1, "SQM3",xposVerBox,yposVerBox,zposCuBar,0, "ONLY");
-
- gMC->Gspos("CU0L",2, "SQM3",xposHorBox,yposHorBox,-zposCuBar,0, "ONLY");
- gMC->Gspos("CU1L",2, "SQM3", 0.0,0.0,-(zposCu+ zCu),0, "ONLY");
- gMC->Gspos("CU2L",2, "SQM3",xposVerBox,yposVerBox,zposCuBar,0, "ONLY");
- // chamber 4
-
- gMC->Gspos("CU0L",3, "SQM4",xposHorBox,yposHorBox,zposCuBar,0, "ONLY");
- gMC->Gspos("CU1L",3, "SQM4", 0.0,0.0,zposCu,0, "ONLY");
- gMC->Gspos("CU2L",3, "SQM4",xposVerBox,yposVerBox,zposCuBar,0, "ONLY");
-
- gMC->Gspos("CU0L",4, "SQM4",xposHorBox,yposHorBox,-zposCuBar,0, "ONLY");
- gMC->Gspos("CU1L",4, "SQM4", 0.0,0.0,-(zposCu+ zCu),0, "ONLY");
- gMC->Gspos("CU2L",4, "SQM4",xposVerBox,yposVerBox,zposCuBar,0, "ONLY");
-
-//Positioning Roha cell
-
- // chamber 3
-
- gMC->Gspos("RH0L",1, "SQM3",xposHorBox,yposHorBox,zposRohaBar,0, "ONLY");
- gMC->Gspos("RH1L",1, "SQM3", 0.0,0.0,zposRoha,0, "ONLY");
- gMC->Gspos("RH2L",1, "SQM3",xposVerBox,yposVerBox,zposRohaBar,0, "ONLY");
-
- gMC->Gspos("RH0L",2, "SQM3",xposHorBox,yposHorBox,-zposRohaBar,0, "ONLY");
- gMC->Gspos("RH1L",2, "SQM3", 0.0,0.0,-(zposRoha+ zRoha),0, "ONLY");
- gMC->Gspos("RH2L",2, "SQM3",xposVerBox,yposVerBox,zposRohaBar,0, "ONLY");
-
- // chamber 4
-
- gMC->Gspos("RH0L",3, "SQM4",xposHorBox,yposHorBox,zposRohaBar,0, "ONLY");
- gMC->Gspos("RH1L",3, "SQM4", 0.0,0.0,zposRoha,0, "ONLY");
- gMC->Gspos("RH2L",3, "SQM4",xposVerBox,yposVerBox,zposRohaBar,0, "ONLY");
-
- gMC->Gspos("RH0L",4, "SQM4",xposHorBox,yposHorBox,-zposRohaBar,0, "ONLY");
- gMC->Gspos("RH1L",4, "SQM4", 0.0,0.0,-(zposRoha+ zRoha),0, "ONLY");
- gMC->Gspos("RH2L",4, "SQM4",xposVerBox,yposVerBox,zposRohaBar,0, "ONLY");
-
-//Positioning of Mech. exit board
-
- // chamber 3
-
- gMC->Gspos("MB0L",1, "SQM3",xposHorBox,yposHorBox,zposMebBar,0, "ONLY");
- gMC->Gspos("MB1L",1, "SQM3", 0.0,0.0,zposMeb,0, "ONLY");
- gMC->Gspos("MB2L",1, "SQM3",xposVerBox,yposVerBox,zposMebBar,0, "ONLY");
-
- gMC->Gspos("MB0L",2, "SQM3",xposHorBox,yposHorBox,-zposMebBar,0, "ONLY");
- gMC->Gspos("MB1L",2, "SQM3", 0.0,0.0,-(zposMeb+ zMeb),0, "ONLY");
- gMC->Gspos("MB2L",2, "SQM3",xposVerBox,yposVerBox,zposMebBar,0, "ONLY");
- // chamber 4
-
- gMC->Gspos("MB0L",3, "SQM4",xposHorBox,yposHorBox,zposMebBar,0, "ONLY");
- gMC->Gspos("MB1L",3, "SQM4", 0.0,0.0,zposMeb,0, "ONLY");
- gMC->Gspos("MB2L",3, "SQM4",xposVerBox,yposVerBox,zposMebBar,0, "ONLY");
-
- gMC->Gspos("MB0L",4, "SQM4",xposHorBox,yposHorBox,-zposMebBar,0, "ONLY");
- gMC->Gspos("MB1L",4, "SQM4", 0.0,0.0,-(zposMeb+ zMeb),0, "ONLY");
- gMC->Gspos("MB2L",4, "SQM4",xposVerBox,yposVerBox,zposMebBar,0, "ONLY");
-
-//Positioning of Electronic exit board
-
-
- // chamber 3
-
- gMC->Gspos("EB0L",1, "SQM3",xposHorBox,yposHorBox,zposEebBar,0, "ONLY");
- gMC->Gspos("EB1L",1, "SQM3", 0.0,0.0,zposEeb,0, "ONLY");
- gMC->Gspos("EB2L",1, "SQM3",xposVerBox,yposVerBox,zposEebBar,0, "ONLY");
-
- gMC->Gspos("EB0L",2, "SQM3",xposHorBox,yposHorBox,-zposEebBar,0, "ONLY");
- gMC->Gspos("EB1L",2, "SQM3", 0.0,0.0,-(zposEeb+ zEeb),0, "ONLY");
- gMC->Gspos("EB2L",2, "SQM3",xposVerBox,yposVerBox,zposEebBar,0, "ONLY");
- // chamber 4
-
- gMC->Gspos("EB0L",3, "SQM4",xposHorBox,yposHorBox,zposEebBar,0, "ONLY");
- gMC->Gspos("EB1L",3, "SQM4", 0.0,0.0,zposEeb,0, "ONLY");
- gMC->Gspos("EB2L",3, "SQM4",xposVerBox,yposVerBox,zposEebBar,0, "ONLY");
-
- gMC->Gspos("EB0L",4, "SQM4",xposHorBox,yposHorBox,-zposEebBar,0, "ONLY");
- gMC->Gspos("EB1L",4, "SQM4", 0.0,0.0,-(zposEeb+ zEeb),0, "ONLY");
- gMC->Gspos("EB2L",4, "SQM4",xposVerBox,yposVerBox,zposEebBar,0, "ONLY");
-
-
-//----------------------------------------------------------------------
-// Frames
-//----------------------------------------------------------------------
-//Frame-1
- Float_t frame1[3] ;
- frame1[0] = 101.0/2.; //100.6 = 94.5 + 2.5 + 3.6
- frame1[1] = 2.5/2.;
- frame1[2] = 5.0/2.;
+ //....(Setting posion of Segment 0,1,2)..................................................................
+
+ Float_t xposHorBox = bparH[0] + 23.1; // 23.1 = 20.6(inner radius of qrd) + 2.5 (width of frame)
+ Float_t yposHorBox = -bparH[1];
+
+ Float_t xposVerBox = -bparV[0];
+ Float_t yposVerBox = bparV[1] + 23.1;
+
+
+ //Positioning the PCB
+
+
+ // chamber 3
+ gMC->Gspos("SCB0L",1, "SQM3",xposHorBox,yposHorBox,zposCbbBar,0, "ONLY");
+ gMC->Gspos("SCB1L",1, "SQM3", 0.0,0.0,zposCbbBar,0, "ONLY");
+ gMC->Gspos("SCB2L",1, "SQM3",xposVerBox,yposVerBox,zposCbbBar,0, "ONLY");
+
+ gMC->Gspos("SCB0L",2, "SQM3",xposHorBox,yposHorBox,-zposCbbBar,0, "ONLY");
+ gMC->Gspos("SCB1L",2, "SQM3", 0.0,0.0,-zposCbbBar,0, "ONLY");
+ gMC->Gspos("SCB2L",2, "SQM3",xposVerBox,yposVerBox,-zposCbbBar,0, "ONLY");
+
+ // chamber 4
+ gMC->Gspos("SCB0L",3, "SQM4",xposHorBox,yposHorBox,zposCbbBar,0, "ONLY");
+ gMC->Gspos("SCB1L",3, "SQM4", 0.0,0.0,zposCbbBar,0, "ONLY");
+ gMC->Gspos("SCB2L",3, "SQM4",xposVerBox,yposVerBox,zposCbbBar,0, "ONLY");
+
+ gMC->Gspos("SCB0L",4, "SQM4",xposHorBox,yposHorBox,-zposCbbBar,0, "ONLY");
+ gMC->Gspos("SCB1L",4, "SQM4", 0.0,0.0,-zposCbbBar,0, "ONLY");
+ gMC->Gspos("SCB2L",4, "SQM4",xposVerBox,yposVerBox,-zposCbbBar,0, "ONLY");
+
- gMC->Gsvolu("FRM1", "BOX", idPGF30, frame1, 3); //Frame - 1 // fill with pkk GF30
-
- Float_t arib1[3];
- arib1[0] = frame1[0];
- arib1[1] = 0.9/2.;
- arib1[2] =(frame1[2]-0.95)/2.0;
-
- gMC->Gsvolu("FRA1", "BOX", idAir, arib1, 3); // fill with air
-
- Float_t xposarib1 = 0;
- Float_t yposarib1 = -frame1[1] + arib1[1];
- Float_t zposarib1 = frame1[2] - arib1[2];
-
- gMC->Gspos("FRA1",1, "FRM1", xposarib1, yposarib1, zposarib1,0, "ONLY"); //replace pkk GF30 with air(b)
- gMC->Gspos("FRA1",2, "FRM1", xposarib1, yposarib1, -zposarib1,0, "ONLY"); //replace pkk GF30 with air(nb)
-
- Float_t rrib1[3];
- rrib1[0] = frame1[0];
- rrib1[1] = 0.6/2.;
- rrib1[2] =(frame1[2]-0.95)/2.0;
-
- gMC->Gsvolu("FRR1", "BOX", idRoha, rrib1, 3); // fill with rohacell
-
- Float_t xposrrib1 = 0.0;
- Float_t yposrrib1 = frame1[1] - rrib1[1];
- Float_t zposrrib1 = frame1[2] - rrib1[2];
-
- gMC->Gspos("FRR1",1, "FRM1", xposrrib1, yposrrib1, zposrrib1,0, "ONLY");//replace pkk GF30 with rohacell
- gMC->Gspos("FRR1",2, "FRM1", xposrrib1, yposrrib1, -zposrrib1,0, "ONLY");//replace pkk GF30 with rohacell
+ //Positioning Copper sheet
+
+ // chamber 3
+ gMC->Gspos("SCU0L",1, "SQM3",xposHorBox,yposHorBox,zposCuBar,0, "ONLY");
+ gMC->Gspos("SCU1L",1, "SQM3", 0.0,0.0,zposCuBar,0, "ONLY");
+ gMC->Gspos("SCU2L",1, "SQM3",xposVerBox,yposVerBox,zposCuBar,0, "ONLY");
+
+ gMC->Gspos("SCU0L",2, "SQM3",xposHorBox,yposHorBox,-zposCuBar,0, "ONLY");
+ gMC->Gspos("SCU1L",2, "SQM3", 0.0,0.0,-zposCuBar,0, "ONLY");
+ gMC->Gspos("SCU2L",2, "SQM3",xposVerBox,yposVerBox,-zposCuBar,0, "ONLY");
+
+ // chamber 4
+ gMC->Gspos("SCU0L",3, "SQM4",xposHorBox,yposHorBox,zposCuBar,0, "ONLY");
+ gMC->Gspos("SCU1L",3, "SQM4", 0.0,0.0,zposCuBar,0, "ONLY");
+ gMC->Gspos("SCU2L",3, "SQM4",xposVerBox,yposVerBox,zposCuBar,0, "ONLY");
+
+ gMC->Gspos("SCU0L",4, "SQM4",xposHorBox,yposHorBox,-zposCuBar,0, "ONLY");
+ gMC->Gspos("SCU1L",4, "SQM4", 0.0,0.0,-zposCuBar,0, "ONLY");
+ gMC->Gspos("SCU2L",4, "SQM4",xposVerBox,yposVerBox,-zposCuBar,0, "ONLY");
- Float_t xposFr1 = frame1[0] + 20.6;
- Float_t yposFr1 = -3.7 + frame1[1] ;
- Float_t zposFr1 = 0.0;
-
- gMC->Gspos("FRM1",1, "SQM3", xposFr1, yposFr1, zposFr1,0, "ONLY");// frame -1
- gMC->Gspos("FRM1",2, "SQM4", xposFr1, yposFr1, zposFr1,0, "ONLY");// frame -1
-
-
-//......................................................................................
-//Frame-2
-
- Float_t frame2[3];
- frame2[0] = 4.0/2.;
- frame2[1] = 1.2/2.;
- frame2[2] = 5.0/2;
-
- gMC->Gsvolu("FRM2", "BOX", idPGF30, frame2, 3); //Frame - 2
-
- Float_t rrib2[3];
- rrib2[0] = frame2[0]-1.0/2.0;
- rrib2[1] = frame2[1];
- rrib2[2] =(frame2[2]-0.95)/2.0;
-
- gMC->Gsvolu("FRR2", "BOX", idRoha, rrib2, 3);
-
- Float_t xposrrib2 = -1.0/2.0;
- Float_t yposrrib2 = 0.0;
- Float_t zposrrib2 = frame2[2] - rrib2[2];
-
- gMC->Gspos("FRR2",1, "FRM2", xposrrib2, yposrrib2, zposrrib2,0, "ONLY");//replace pkk GF30 with rohacell
- gMC->Gspos("FRR2",2, "FRM2", xposrrib2, yposrrib2, -zposrrib2,0, "ONLY");//replace pkk GF30 with roha
-
-
+ //Positioning Roha cell
+
+ // chamber 3
+
+ gMC->Gspos("SRH0L",1, "SQM3",xposHorBox,yposHorBox,zposRohaBar,0, "ONLY");
+ gMC->Gspos("SRH1L",1, "SQM3", 0.0,0.0,zposRohaBar,0, "ONLY");
+ gMC->Gspos("SRH2L",1, "SQM3",xposVerBox,yposVerBox,zposRohaBar,0, "ONLY");
+
+ gMC->Gspos("SRH0L",2, "SQM3",xposHorBox,yposHorBox,-zposRohaBar,0, "ONLY");
+ gMC->Gspos("SRH1L",2, "SQM3", 0.0,0.0,-zposRohaBar,0, "ONLY");
+ gMC->Gspos("SRH2L",2, "SQM3",xposVerBox,yposVerBox,-zposRohaBar,0, "ONLY");
+
+ // chamber 4
+
+ gMC->Gspos("SRH0L",3, "SQM4",xposHorBox,yposHorBox,zposRohaBar,0, "ONLY");
+ gMC->Gspos("SRH1L",3, "SQM4", 0.0,0.0,zposRohaBar,0, "ONLY");
+ gMC->Gspos("SRH2L",3, "SQM4",xposVerBox,yposVerBox,zposRohaBar,0, "ONLY");
+
+ gMC->Gspos("SRH0L",4, "SQM4",xposHorBox,yposHorBox,-zposRohaBar,0, "ONLY");
+ gMC->Gspos("SRH1L",4, "SQM4", 0.0,0.0,-zposRohaBar,0, "ONLY");
+ gMC->Gspos("SRH2L",4, "SQM4",xposVerBox,yposVerBox,-zposRohaBar,0, "ONLY");
- Float_t xposFr2 = frame2[0] + 117.6;
- Float_t yposFr2 = -frame2[1];
- Float_t zposFr2 = 0.0;
+ //Positioning of Mech. exit board
+
+ // chamber 3
+
+ gMC->Gspos("SMB0L",1, "SQM3",xposHorBox,yposHorBox,zposMebBar,0, "ONLY");
+ gMC->Gspos("SMB1L",1, "SQM3", 0.0,0.0,zposMebBar,0, "ONLY");
+ gMC->Gspos("SMB2L",1, "SQM3",xposVerBox,yposVerBox,zposMebBar,0, "ONLY");
+
+ gMC->Gspos("SMB0L",2, "SQM3",xposHorBox,yposHorBox,-zposMebBar,0, "ONLY");
+ gMC->Gspos("SMB1L",2, "SQM3", 0.0,0.0,-zposMebBar,0, "ONLY");
+ gMC->Gspos("SMB2L",2, "SQM3",xposVerBox,yposVerBox,-zposMebBar,0, "ONLY");
+ // chamber 4
+
+ gMC->Gspos("SMB0L",3, "SQM4",xposHorBox,yposHorBox,zposMebBar,0, "ONLY");
+ gMC->Gspos("SMB1L",3, "SQM4", 0.0,0.0,zposMebBar,0, "ONLY");
+ gMC->Gspos("SMB2L",3, "SQM4",xposVerBox,yposVerBox,zposMebBar,0, "ONLY");
+
+ gMC->Gspos("SMB0L",4, "SQM4",xposHorBox,yposHorBox,-zposMebBar,0, "ONLY");
+ gMC->Gspos("SMB1L",4, "SQM4", 0.0,0.0,-zposMebBar,0, "ONLY");
+ gMC->Gspos("SMB2L",4, "SQM4",xposVerBox,yposVerBox,-zposMebBar,0, "ONLY");
+
+ //Positioning of Electronic exit board
+
+
+ // chamber 3
- gMC->Gspos("FRM2",1, "SQM3", xposFr2, yposFr2, zposFr2,0, "ONLY");//global positing of frame in SQM3
- gMC->Gspos("FRM2",2, "SQM4", xposFr2, yposFr2, zposFr2,0, "ONLY");//global positing of frame in SQM4
-
+ gMC->Gspos("SEB0L",1, "SQM3",xposHorBox,yposHorBox,zposEebBar,0, "ONLY");
+ gMC->Gspos("SEB1L",1, "SQM3", 0.0,0.0,zposEebBar,0, "ONLY");
+ gMC->Gspos("SEB2L",1, "SQM3",xposVerBox,yposVerBox,zposEebBar,0, "ONLY");
-//......................................................................................
-//Frame-3
-
- Float_t pgparFr3[10];
- pgparFr3[0] = 0.;
- pgparFr3[1] = 90.;
- pgparFr3[2] = 5;
- pgparFr3[3] = 2.;
- pgparFr3[4] = 0.;
- pgparFr3[5] = 117.6;
- pgparFr3[6] = 121.6;
- pgparFr3[7] = pgparFr3[4] + 5.0;
- pgparFr3[8] = pgparFr3[5];
- pgparFr3[9] = pgparFr3[6];
-
- gMC->Gsvolu("FRM3", "PGON", idPGF30, pgparFr3, 10);
-
- Float_t pgparRrib3[10];
- pgparRrib3[0] = 0.;
- pgparRrib3[1] = 90.;
- pgparRrib3[2] = 5;
- pgparRrib3[3] = 2.;
- pgparRrib3[4] = 0.;
- pgparRrib3[5] = 117.6;
- pgparRrib3[6] = 120.6;
- pgparRrib3[7] = pgparRrib3[4] +1.55 ;
- pgparRrib3[8] = pgparRrib3[5];
- pgparRrib3[9] = pgparRrib3[6];
-
- gMC->Gsvolu("FRR3", "PGON", idRoha, pgparRrib3, 10);
-
- Float_t xposrrib3 = 0.0;
- Float_t yposrrib3 = 0.0;
- Float_t zposrrib3 = 0.0;
+ gMC->Gspos("SEB0L",2, "SQM3",xposHorBox,yposHorBox,-zposEebBar,0, "ONLY");
+ gMC->Gspos("SEB1L",2, "SQM3", 0.0,0.0,-zposEebBar,0, "ONLY");
+ gMC->Gspos("SEB2L",2, "SQM3",xposVerBox,yposVerBox,-zposEebBar,0, "ONLY");
+ // chamber 4
+
+ gMC->Gspos("SEB0L",3, "SQM4",xposHorBox,yposHorBox,zposEebBar,0, "ONLY");
+ gMC->Gspos("SEB1L",3, "SQM4", 0.0,0.0,zposEebBar,0, "ONLY");
+ gMC->Gspos("SEB2L",3, "SQM4",xposVerBox,yposVerBox,zposEebBar,0, "ONLY");
+
+ gMC->Gspos("SEB0L",4, "SQM4",xposHorBox,yposHorBox,-zposEebBar,0, "ONLY");
+ gMC->Gspos("SEB1L",4, "SQM4", 0.0,0.0,-zposEebBar,0, "ONLY");
+ gMC->Gspos("SEB2L",4, "SQM4",xposVerBox,yposVerBox,-zposEebBar,0, "ONLY");
+
+
+ //----------------------------------------------------------------------
+ // Frames
+ //----------------------------------------------------------------------
+ //Frame-1
+
+ Float_t frame1[3] ;
+ frame1[0] = 101.0/2.; //100.6 = 94.5 + 2.5 + 3.6
+ frame1[1] = 2.5/2.;
+ frame1[2] = 5.0/2.;
+
+ gMC->Gsvolu("SFRM1", "BOX", idPGF30, frame1, 3); //Frame - 1 // fill with pkk GF30
+
+ Float_t arib1[3];
+ arib1[0] = frame1[0];
+ arib1[1] = 0.9/2.;
+ arib1[2] =(frame1[2]-0.95)/2.0;
+
+ gMC->Gsvolu("SFRA1", "BOX", idAir, arib1, 3); // fill with air
+
+ Float_t xposarib1 = 0;
+ Float_t yposarib1 = -frame1[1] + arib1[1];
+ Float_t zposarib1 = frame1[2] - arib1[2];
+
+ gMC->Gspos("SFRA1",1, "SFRM1", xposarib1, yposarib1, zposarib1,0, "ONLY"); //replace pkk GF30 with air(b)
+ gMC->Gspos("SFRA1",2, "SFRM1", xposarib1, yposarib1, -zposarib1,0, "ONLY"); //replace pkk GF30 with air(nb)
+
+ Float_t rrib1[3];
+ rrib1[0] = frame1[0];
+ rrib1[1] = 0.6/2.;
+ rrib1[2] =(frame1[2]-0.95)/2.0;
+
+ gMC->Gsvolu("SFRR1", "BOX", idRoha, rrib1, 3); // fill with rohacell
+
+ Float_t xposrrib1 = 0.0;
+ Float_t yposrrib1 = frame1[1] - rrib1[1];
+ Float_t zposrrib1 = frame1[2] - rrib1[2];
+
+ gMC->Gspos("SFRR1",1, "SFRM1", xposrrib1, yposrrib1, zposrrib1,0, "ONLY");//replace pkk GF30 with rohacell
+ gMC->Gspos("SFRR1",2, "SFRM1", xposrrib1, yposrrib1, -zposrrib1,0, "ONLY");//replace pkk GF30 with rohacell
+
+
+ Float_t xposFr1 = frame1[0] + 20.6;
+ Float_t yposFr1 = -3.7 + frame1[1] ;
+ Float_t zposFr1 = 0.0;
+
+ gMC->Gspos("SFRM1",1, "SQM3", xposFr1, yposFr1, zposFr1,0, "ONLY");// frame -1
+ gMC->Gspos("SFRM1",2, "SQM4", xposFr1, yposFr1, zposFr1,0, "ONLY");// frame -1
+
+
+ //......................................................................................
+ //Frame-2
- gMC->Gspos("FRR3",1, "FRM3", xposrrib3, yposrrib3, zposrrib3,0, "ONLY");
+ Float_t frame2[3];
+ frame2[0] = 4.0/2.;
+ frame2[1] = 1.2/2.;
+ frame2[2] = 5.0/2;
+
+ gMC->Gsvolu("SFRM2", "BOX", idPGF30, frame2, 3); //Frame - 2
+
+ Float_t rrib2[3];
+ rrib2[0] = frame2[0]-1.0/2.0;
+ rrib2[1] = frame2[1];
+ rrib2[2] =(frame2[2]-0.95)/2.0;
- zposrrib3 = 3.45;
-
- gMC->Gspos("FRR3",2, "FRM3", xposrrib3, yposrrib3, zposrrib3,0, "ONLY");
-
+ gMC->Gsvolu("SFRR2", "BOX", idRoha, rrib2, 3);
-
- Float_t xposFr3 = 0.0;
- Float_t yposFr3 = 0.0;
- Float_t zposFr3 = -frame1[2];
-
- gMC->Gspos("FRM3",1, "SQM3", xposFr3, yposFr3, zposFr3,0, "ONLY");// frame -1
- gMC->Gspos("FRM3",2, "SQM4", xposFr3, yposFr3, zposFr3,0, "ONLY");// frame -1
-
-
-//......................................................................................
-//Frame-4
-
- Float_t frame4[3];
- frame4[0] = 1.0/2.;
- frame4[1] = 4.0/2.;
- frame4[2] = frame1[2];
-
- gMC->Gsvolu("FRM4", "BOX", idPGF30, frame4, 3);
+ Float_t xposrrib2 = -1.0/2.0;
+ Float_t yposrrib2 = 0.0;
+ Float_t zposrrib2 = frame2[2] - rrib2[2];
+
+ gMC->Gspos("SFRR2",1, "SFRM2", xposrrib2, yposrrib2, zposrrib2,0, "ONLY");//replace pkk GF30 with rohacell
+ gMC->Gspos("SFRR2",2, "SFRM2", xposrrib2, yposrrib2, -zposrrib2,0, "ONLY");//replace pkk GF30 with roha
+
- Float_t rrib4[3];
- rrib4[0] = frame4[0];
- rrib4[1] = frame4[1]-1.0/2;
- rrib4[2] =(frame4[2]-0.95)/2.0;
+
+ Float_t xposFr2 = frame2[0] + 117.6;
+ Float_t yposFr2 = -frame2[1];
+ Float_t zposFr2 = 0.0;
+
+ gMC->Gspos("SFRM2",1, "SQM3", xposFr2, yposFr2, zposFr2,0, "MANY");//global positing of frame in SQM3
+ gMC->Gspos("SFRM2",2, "SQM4", xposFr2, yposFr2, zposFr2,0, "MANY");//global positing of frame in SQM4
+
+
+ //......................................................................................
+
+ //Frame-3
+
+ Float_t pgparFr3[10];
+ pgparFr3[0] = 0.;
+ pgparFr3[1] = 90.;
+ pgparFr3[2] = 5;
+ pgparFr3[3] = 2.;
+ pgparFr3[4] = 0.;
+ pgparFr3[5] = 117.6;
+ pgparFr3[6] = 121.6;
+ pgparFr3[7] = pgparFr3[4] + 5.0;
+ pgparFr3[8] = pgparFr3[5];
+ pgparFr3[9] = pgparFr3[6];
+
+ gMC->Gsvolu("SFRM3", "PGON", idPGF30, pgparFr3, 10);
+
+ Float_t pgparRrib3[10];
+ pgparRrib3[0] = 0.;
+ pgparRrib3[1] = 90.;
+ pgparRrib3[2] = 5;
+ pgparRrib3[3] = 2.;
+ pgparRrib3[4] = 0.;
+ pgparRrib3[5] = 117.6;
+ pgparRrib3[6] = 120.6;
+ pgparRrib3[7] = pgparRrib3[4] +1.55 ;
+ pgparRrib3[8] = pgparRrib3[5];
+ pgparRrib3[9] = pgparRrib3[6];
+
+ gMC->Gsvolu("SFRR3", "PGON", idRoha, pgparRrib3, 10);
+
+ Float_t xposrrib3 = 0.0;
+ Float_t yposrrib3 = 0.0;
+ Float_t zposrrib3 = 0.0;
- gMC->Gsvolu("FRR4", "BOX", idRoha, rrib4, 3);
+ gMC->Gspos("SFRR3",1, "SFRM3", xposrrib3, yposrrib3, zposrrib3,0, "ONLY");
+
+ zposrrib3 = 3.45;
+
+ gMC->Gspos("SFRR3",2, "SFRM3", xposrrib3, yposrrib3, zposrrib3,0, "ONLY");
+
- Float_t xposrrib4 = 0.0;
- Float_t yposrrib4 = -1.0/2;
- Float_t zposrrib4 = frame4[2] - rrib4[2];
-
- gMC->Gspos("FRR4",1, "FRM4", xposrrib4, yposrrib4, zposrrib4,0, "ONLY");
- gMC->Gspos("FRR4",2, "FRM4", xposrrib4, yposrrib4, -zposrrib4,0, "ONLY");
-
-
-
- Float_t xposFr4 = -frame4[0];
- Float_t yposFr4 = -frame4[1] + 117.6;
- Float_t zposFr4 = 0.0;
-
- gMC->Gspos("FRM4",1, "SQM3", xposFr4, yposFr4, zposFr4,0, "ONLY");
- gMC->Gspos("FRM4",2, "SQM4", xposFr4, yposFr4, zposFr4,0, "ONLY");
+
+ Float_t xposFr3 = 0.0;
+ Float_t yposFr3 = 0.0;
+ Float_t zposFr3 = -frame1[2];
+ gMC->Gspos("SFRM3",1, "SQM3", xposFr3, yposFr3, zposFr3,0, "ONLY");// frame -1
+ gMC->Gspos("SFRM3",2, "SQM4", xposFr3, yposFr3, zposFr3,0, "ONLY");// frame -1
+
+
+ //......................................................................................
+ //Frame-4
+
+ Float_t frame4[3];
+ frame4[0] = 1.0/2.;
+ frame4[1] = 4.0/2.;
+ frame4[2] = frame1[2];
+
+ gMC->Gsvolu("SFRM4", "BOX", idPGF30, frame4, 3);
+
+ Float_t rrib4[3];
+ rrib4[0] = frame4[0];
+ rrib4[1] = frame4[1]-1.0/2;
+ rrib4[2] =(frame4[2]-0.95)/2.0;
-//......................................................................................
-//Frame-5
- Float_t frame5[3] ;
- frame5[0] = 2.7/2.;
- frame5[1] = 101.0/2.;
- frame5[2] = 5.0/2.;
+ gMC->Gsvolu("SFRR4", "BOX", idRoha, rrib4, 3);
+
+ Float_t xposrrib4 = 0.0;
+ Float_t yposrrib4 = -1.0/2;
+ Float_t zposrrib4 = frame4[2] - rrib4[2];
+
+ gMC->Gspos("SFRR4",1, "SFRM4", xposrrib4, yposrrib4, zposrrib4,0, "ONLY");
+ gMC->Gspos("SFRR4",2, "SFRM4", xposrrib4, yposrrib4, -zposrrib4,0, "ONLY");
+
- gMC->Gsvolu("FRM5", "BOX", idPGF30, frame5, 3); //Frame - 1
+
+ Float_t xposFr4 = -frame4[0];
+ Float_t yposFr4 = -frame4[1] + 117.6;
+ Float_t zposFr4 = 0.0;
+
+ gMC->Gspos("SFRM4",1, "SQM3", xposFr4, yposFr4, zposFr4,0, "MANY");
+ gMC->Gspos("SFRM4",2, "SQM4", xposFr4, yposFr4, zposFr4,0, "MANY");
+
+
+ //......................................................................................
+ //Frame-5
+ Float_t frame5[3] ;
+ frame5[0] = 2.7/2.;
+ frame5[1] = 101.0/2.;
+ frame5[2] = 5.0/2.;
+
+ gMC->Gsvolu("SFRM5", "BOX", idPGF30, frame5, 3); //Frame - 1
- Float_t arib5[3];
- arib5[0] = 0.9/2.0;
- arib5[1] = frame5[1];
- arib5[2] = (frame5[2]-0.95)/2.0;
-
- gMC->Gsvolu("FRA5", "BOX", idAir, arib5, 3);
-
- Float_t xposarib5 = -frame5[0] + arib5[0];
- Float_t yposarib5 = 0.0;
- Float_t zposarib5 = frame5[2] - arib5[2];
-
- gMC->Gspos("FRA5",1, "FRM5", xposarib5, yposarib5, zposarib5,0, "ONLY");
- gMC->Gspos("FRA5",2, "FRM5", xposarib5, yposarib5, -zposarib5,0, "ONLY");
-
- Float_t rrib5[3];
- rrib5[0] = 0.8/2.0;
- rrib5[1] = frame5[1];
- rrib5[2] = (frame5[2]-0.95)/2.0;
-
- gMC->Gsvolu("FRR5", "BOX", idRoha, rrib5, 3);
-
- Float_t xposrrib5 = frame5[0] - rrib5[0];
- Float_t yposrrib5 = 0.0;
- Float_t zposrrib5 = frame5[2] - rrib5[2];
-
- gMC->Gspos("FRR5",1, "FRM5", xposrrib5, yposrrib5, zposrrib5,0, "ONLY");
- gMC->Gspos("FRR5",2, "FRM5", xposrrib5, yposrrib5, -zposrrib5,0, "ONLY");
-
- Float_t xposFr5 = -3.7 + frame5[0];
- Float_t yposFr5 = frame5[1] + 20.6;
- Float_t zposFr5 = 0.0;
-
- gMC->Gspos("FRM5",1, "SQM3", xposFr5, yposFr5, zposFr5,0, "ONLY");
- gMC->Gspos("FRM5",2, "SQM4", xposFr5, yposFr5, zposFr5,0, "ONLY");
-
-//......................................................................................
-//Frame -6
-
- Float_t frame6[3];
- frame6[0] = 1.0/2.;
- frame6[1] = 2.5/2.;
- frame6[2] = frame1[2];
-
- gMC->Gsvolu("FRM6", "BOX", idPGF30, frame6, 3);
-
- Float_t rrib6[3];
- rrib6[0] = frame6[0];
- rrib6[1] = 1.5/2.;
- rrib6[2] =(frame2[2]-0.95)/2.0;
-
- gMC->Gsvolu("FRR6", "BOX", idRoha, rrib6, 3);
+ Float_t arib5[3];
+ arib5[0] = 0.9/2.0;
+ arib5[1] = frame5[1];
+ arib5[2] = (frame5[2]-0.95)/2.0;
+
+ gMC->Gsvolu("SFRA5", "BOX", idAir, arib5, 3);
+
+ Float_t xposarib5 = -frame5[0] + arib5[0];
+ Float_t yposarib5 = 0.0;
+ Float_t zposarib5 = frame5[2] - arib5[2];
- Float_t xposrrib6 = 0.0;
- Float_t yposrrib6 = 1.0/2.0;
- Float_t zposrrib6 = frame6[2] - rrib6[2];
-
- gMC->Gspos("FRR6",1, "FRM6", xposrrib6, yposrrib6, zposrrib6,0, "ONLY");
- gMC->Gspos("FRR6",2, "FRM6", xposrrib6, yposrrib6, -zposrrib6,0, "ONLY");
-
-
+ gMC->Gspos("SFRA5",1, "SFRM5", xposarib5, yposarib5, zposarib5,0, "ONLY");
+ gMC->Gspos("SFRA5",2, "SFRM5", xposarib5, yposarib5, -zposarib5,0, "ONLY");
+
+ Float_t rrib5[3];
+ rrib5[0] = 0.8/2.0;
+ rrib5[1] = frame5[1];
+ rrib5[2] = (frame5[2]-0.95)/2.0;
+
+ gMC->Gsvolu("SFRR5", "BOX", idRoha, rrib5, 3);
+
+ Float_t xposrrib5 = frame5[0] - rrib5[0];
+ Float_t yposrrib5 = 0.0;
+ Float_t zposrrib5 = frame5[2] - rrib5[2];
+
+ gMC->Gspos("SFRR5",1, "SFRM5", xposrrib5, yposrrib5, zposrrib5,0, "ONLY");
+ gMC->Gspos("SFRR5",2, "SFRM5", xposrrib5, yposrrib5, -zposrrib5,0, "ONLY");
+
+ Float_t xposFr5 = -3.7 + frame5[0];
+ Float_t yposFr5 = frame5[1] + 20.6;
+ Float_t zposFr5 = 0.0;
+
+ gMC->Gspos("SFRM5",1, "SQM3", xposFr5, yposFr5, zposFr5,0, "ONLY");
+ gMC->Gspos("SFRM5",2, "SQM4", xposFr5, yposFr5, zposFr5,0, "ONLY");
+
+ //......................................................................................
+ //Frame -6
+
+ Float_t frame6[3];
+ frame6[0] = 1.0/2.;
+ frame6[1] = 2.5/2.;
+ frame6[2] = frame1[2];
+
+ gMC->Gsvolu("SFRM6", "BOX", idPGF30, frame6, 3);
+
+ Float_t rrib6[3];
+ rrib6[0] = frame6[0];
+ rrib6[1] = 1.5/2.;
+ rrib6[2] =(frame2[2]-0.95)/2.0;
- Float_t xposFr6 = -frame6[0];
- Float_t yposFr6 = frame6[1] + 20.6;
- Float_t zposFr6 = 0.0;
+ gMC->Gsvolu("SFRR6", "BOX", idRoha, rrib6, 3);
+
+ Float_t xposrrib6 = 0.0;
+ Float_t yposrrib6 = 1.0/2.0;
+ Float_t zposrrib6 = frame6[2] - rrib6[2];
- gMC->Gspos("FRM6",1, "SQM3", xposFr6, yposFr6, zposFr6,0, "ONLY");
- gMC->Gspos("FRM6",2, "SQM4", xposFr6, yposFr6, zposFr6,0, "ONLY");
-
+ gMC->Gspos("SFRR6",1, "SFRM6", xposrrib6, yposrrib6, zposrrib6,0, "ONLY");
+ gMC->Gspos("SFRR6",2, "SFRM6", xposrrib6, yposrrib6, -zposrrib6,0, "ONLY");
+
+
+
+ Float_t xposFr6 = -frame6[0];
+ Float_t yposFr6 = frame6[1] + 20.6;
+ Float_t zposFr6 = 0.0;
+ gMC->Gspos("SFRM6",1, "SQM3", xposFr6, yposFr6, zposFr6,0, "ONLY");
+ gMC->Gspos("SFRM6",2, "SQM4", xposFr6, yposFr6, zposFr6,0, "ONLY");
+
+
//......................................................................................
//Frame - 7 inner pgon
+
+ Float_t pgparFr7[10];
+ pgparFr7[0] = 0.;
+ pgparFr7[1] = 90.;
+ pgparFr7[2] = 5;
+ pgparFr7[3] = 2.;
+ pgparFr7[4] = 0.;
+ pgparFr7[5] = 20.6;
+ pgparFr7[6] = 23.1;
+ pgparFr7[7] = pgparFr7[4] + 5.0;
+ pgparFr7[8] = pgparFr7[5];
+ pgparFr7[9] = pgparFr7[6];
+
+ gMC->Gsvolu("SFRM7", "PGON", idPGF30, pgparFr7, 10);
+
+ Float_t pgparRrib7[10];
+ pgparRrib7[0] = 0.;
+ pgparRrib7[1] = 90.;
+ pgparRrib7[2] = 5;
+ pgparRrib7[3] = 2.;
+ pgparRrib7[4] = 0.;
+ pgparRrib7[5] = 21.6;
+ pgparRrib7[6] = 23.1;
+ pgparRrib7[7] = pgparRrib7[4] + 1.55;
+ pgparRrib7[8] = pgparRrib7[5];
+ pgparRrib7[9] = pgparRrib7[6];
+
+ gMC->Gsvolu("SFRR7", "PGON", idRoha, pgparRrib7, 10);
+
+ Float_t xposrrib7 = 0.0;
+ Float_t yposrrib7 = 0.0;
+ Float_t zposrrib7 = 0.0;
+
+ gMC->Gspos("SFRR7",1, "SFRM7", xposrrib7, yposrrib7, zposrrib7,0, "ONLY");
+
+ zposrrib7 = 3.45;
+
+ gMC->Gspos("SFRR7",2, "SFRM7", xposrrib7, yposrrib7, zposrrib7,0, "ONLY");
+
+ Float_t xposFr7 = 0.0;
+ Float_t yposFr7 = 0.0;
+ Float_t zposFr7 = -frame1[2];
+
+ gMC->Gspos("SFRM7",1, "SQM3", xposFr7, yposFr7, zposFr7,0, "ONLY");
+ gMC->Gspos("SFRM7",2, "SQM4", xposFr7, yposFr7, zposFr7,0, "ONLY");
+
+
+ //......................................................................................
+ //Frame - 8
- Float_t pgparFr7[10];
- pgparFr7[0] = 0.;
- pgparFr7[1] = 90.;
- pgparFr7[2] = 5;
- pgparFr7[3] = 2.;
- pgparFr7[4] = 0.;
- pgparFr7[5] = 20.6;
- pgparFr7[6] = 23.1;
- pgparFr7[7] = pgparFr7[4] + 5.0;
- pgparFr7[8] = pgparFr7[5];
- pgparFr7[9] = pgparFr7[6];
-
- gMC->Gsvolu("FRM7", "PGON", idPGF30, pgparFr7, 10);
-
- Float_t pgparRrib7[10];
- pgparRrib7[0] = 0.;
- pgparRrib7[1] = 90.;
- pgparRrib7[2] = 5;
- pgparRrib7[3] = 2.;
- pgparRrib7[4] = 0.;
- pgparRrib7[5] = 21.6;
- pgparRrib7[6] = 23.1;
- pgparRrib7[7] = pgparRrib7[4] + 1.55;
- pgparRrib7[8] = pgparRrib7[5];
- pgparRrib7[9] = pgparRrib7[6];
-
- gMC->Gsvolu("FRR7", "PGON", idRoha, pgparRrib7, 10);
-
- Float_t xposrrib7 = 0.0;
- Float_t yposrrib7 = 0.0;
- Float_t zposrrib7 = 0.0;
-
- gMC->Gspos("FRR7",1, "FRM7", xposrrib7, yposrrib7, zposrrib7,0, "ONLY");
-
- zposrrib7 = 3.45;
-
- gMC->Gspos("FRR7",2, "FRM7", xposrrib7, yposrrib7, zposrrib7,0, "ONLY");
-
- Float_t xposFr7 = 0.0;
- Float_t yposFr7 = 0.0;
- Float_t zposFr7 = -frame1[2];
-
- gMC->Gspos("FRM7",1, "SQM3", xposFr7, yposFr7, zposFr7,0, "ONLY");
- gMC->Gspos("FRM7",2, "SQM4", xposFr7, yposFr7, zposFr7,0, "ONLY");
-
-
-//......................................................................................
-//Frame - 8
-
-
- Float_t frame8[3] ;
- frame8[0] = 2.5/2.0;
- frame8[1] = 1.2/2.0;
- frame8[2] = frame1[2];
-
- gMC->Gsvolu("FRM8", "BOX", idPGF30, frame8, 3); //Frame - 2
-
- Float_t rrib8[3];
- rrib8[0] = frame8[0]-1.0/2;
- rrib8[1] = frame8[1];
- rrib8[2] =(frame8[2]-0.95)/2.0;
-
- gMC->Gsvolu("FRR8", "BOX", idRoha, rrib8, 3);
-
- Float_t xposrrib8 = -1.0/2;
- Float_t yposrrib8 = 0.0;
- Float_t zposrrib8 = frame8[2] - rrib8[2];
-
- gMC->Gspos("FRR8",1, "FRM8", xposrrib8, yposrrib8, zposrrib8,0, "ONLY");
- gMC->Gspos("FRR8",2, "FRM8", xposrrib8, yposrrib8, -zposrrib8,0, "ONLY");
-
-
-
- Float_t xposFr8 = frame8[0] + 20.6;
- Float_t yposFr8 = -frame8[1];
- Float_t zposFr8 = 0.0;
-
- gMC->Gspos("FRM8",1, "SQM3", xposFr8, yposFr8, zposFr8,0, "ONLY");
- gMC->Gspos("FRM8",2, "SQM4", xposFr8, yposFr8, zposFr8,0, "ONLY");
+
+ Float_t frame8[3] ;
+ frame8[0] = 2.5/2.0;
+ frame8[1] = 1.2/2.0;
+ frame8[2] = frame1[2];
+
+ gMC->Gsvolu("SFRM8", "BOX", idPGF30, frame8, 3); //Frame - 2
-
-
-
-//^^^^^^^^^^^^^^^^^^^^^^^^^ Sensitive volumes ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
- Float_t zsenv = 0.5; // distance between two cathode plane
-
- //Segment-0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- bparH[0] = 94.5/2.;
- bparH[1] = 1.2/2.;
- bparH[2] = zsenv/2.;
- gMC->Gsvolu("C3G0", "BOX", idGas, bparH, 3);
- gMC->Gsvolu("C4G0", "BOX", idGas, bparH, 3);
+ Float_t rrib8[3];
+ rrib8[0] = frame8[0]-1.0/2;
+ rrib8[1] = frame8[1];
+ rrib8[2] =(frame8[2]-0.95)/2.0;
+
+ gMC->Gsvolu("SFRR8", "BOX", idRoha, rrib8, 3);
+
+ Float_t xposrrib8 = -1.0/2;
+ Float_t yposrrib8 = 0.0;
+ Float_t zposrrib8 = frame8[2] - rrib8[2];
+
+ gMC->Gspos("SFRR8",1, "SFRM8", xposrrib8, yposrrib8, zposrrib8,0, "ONLY");
+ gMC->Gspos("SFRR8",2, "SFRM8", xposrrib8, yposrrib8, -zposrrib8,0, "ONLY");
+
+
+
+ Float_t xposFr8 = frame8[0] + 20.6;
+ Float_t yposFr8 = -frame8[1];
+ Float_t zposFr8 = 0.0;
+
+ gMC->Gspos("SFRM8",1, "SQM3", xposFr8, yposFr8, zposFr8,0, "ONLY");
+ gMC->Gspos("SFRM8",2, "SQM4", xposFr8, yposFr8, zposFr8,0, "ONLY");
+
+
+
+ //^^^^^^^^^^^^^^^^^^^^^^^^^ Sensitive volumes ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+ Float_t zsenv = 0.5; // distance between two cathode plane
+
+ //Segment-0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ bparH[0] = 94.5/2.;
+ bparH[1] = 1.2/2.;
+ bparH[2] = zsenv/2.;
+ gMC->Gsvolu("SC3G0", "BOX", idGas, bparH, 3);
+ gMC->Gsvolu("SC4G0", "BOX", idGas, bparH, 3);
+
//Segment-1 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- pgpar[0] = 0.;
- pgpar[1] = 90.;
- pgpar[2] = 5;
- pgpar[3] = 2.;
- pgpar[4] = -zsenv/2.;
- pgpar[5] = 23.1;
- pgpar[6] = 117.6;
- pgpar[7] = zsenv/2.;
- pgpar[8] = pgpar[5];
- pgpar[9] = pgpar[6];
- gMC->Gsvolu("C3G1", "PGON", idGas, pgpar, 10);
- gMC->Gsvolu("C4G1", "PGON", idGas, pgpar, 10);
-
-
-//Segment-2 - vertical box ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
- bparV[0] = 1.0/2.;
- bparV[1] = 95.5/2.;
- bparV[2] = zsenv/2.;
- gMC->Gsvolu("C3G2", "BOX", idGas, bparV, 3);
- gMC->Gsvolu("C4G2", "BOX", idGas, bparV, 3);
-
-//...........................................................................................
-
- xposHorBox = bparH[0] + 23.1;
- yposHorBox = -bparH[1];
-
- xposVerBox = -bparV[0];
- yposVerBox = bparV[1] + 23.1;
-
- gMC->Gspos("C3G0",1, "SQM3", xposHorBox,yposHorBox,0.,0, "ONLY");
- gMC->Gspos("C3G1",1, "SQM3", 0.,0.,0.,0, "ONLY");
- gMC->Gspos("C3G2",1, "SQM3", xposVerBox,yposVerBox,0.,0, "ONLY");
-
-
- gMC->Gspos("C4G0",1, "SQM4", xposHorBox,yposHorBox,0.,0, "ONLY");
- gMC->Gspos("C4G1",1, "SQM4", 0.,0.,0.,0, "ONLY");
- gMC->Gspos("C4G2",1, "SQM4", xposVerBox,yposVerBox,0.,0, "ONLY");
+ pgpar[0] = 0.;
+ pgpar[1] = 90.;
+ pgpar[2] = 5;
+ pgpar[3] = 2.;
+ pgpar[4] = -zsenv/2.;
+ pgpar[5] = 23.1;
+ pgpar[6] = 117.6;
+ pgpar[7] = zsenv/2.;
+ pgpar[8] = pgpar[5];
+ pgpar[9] = pgpar[6];
+ gMC->Gsvolu("SC3G1", "PGON", idGas, pgpar, 10);
+ gMC->Gsvolu("SC4G1", "PGON", idGas, pgpar, 10);
+
+ //Segment-2 - vertical box ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+ bparV[0] = 1.0/2.;
+ bparV[1] = 95.5/2.;
+ bparV[2] = zsenv/2.;
+ gMC->Gsvolu("SC3G2", "BOX", idGas, bparV, 3);
+ gMC->Gsvolu("SC4G2", "BOX", idGas, bparV, 3);
+
+ //...........................................................................................
+
+ xposHorBox = bparH[0] + 23.1;
+ yposHorBox = -bparH[1];
+
+ xposVerBox = -bparV[0];
+ yposVerBox = bparV[1] + 23.1;
+
+ gMC->Gspos("SC3G0",1, "SQM3", xposHorBox,yposHorBox,0.,0, "ONLY");
+ gMC->Gspos("SC3G1",1, "SQM3", 0.,0.,0.,0, "ONLY");
+ gMC->Gspos("SC3G2",1, "SQM3", xposVerBox,yposVerBox,0.,0, "ONLY");
+
+
+ gMC->Gspos("SC4G0",1, "SQM4", xposHorBox,yposHorBox,0.,0, "ONLY");
+ gMC->Gspos("SC4G1",1, "SQM4", 0.,0.,0.,0, "ONLY");
+ gMC->Gspos("SC4G2",1, "SQM4", xposVerBox,yposVerBox,0.,0, "ONLY");
+
+
+ //^^^^^^^^^^^^^^^^^^^^^^^^^ Sensitive volumes ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-//^^^^^^^^^^^^^^^^^^^^^^^^^ Sensitive volumes ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
//##################################################################################################
}
//______________________________________________________________________________
-void AliMUONSt2GeometryBuilderV2::SetTransformations()
+void AliMUONSt2GeometryBuilderV2::SetVolumes()
{
-// Defines the transformations for the station2 chambers.
-// ---
+/// Defines the volumes for the station2 chambers.
if (gAlice->GetModule("SHIL")) {
SetMotherVolume(2, "YOUT1");
// Define chamber volumes as virtual
SetVolume(2, "SC03", true);
SetVolume(3, "SC04", true);
+}
+
+//______________________________________________________________________________
+void AliMUONSt2GeometryBuilderV2::SetTransformations()
+{
+/// Defines the transformations for the station2 chambers.
Double_t zpos1 = - AliMUONConstants::DefaultChamberZ(2);
SetTranslation(2, TGeoTranslation(0., 0., zpos1));
//______________________________________________________________________________
void AliMUONSt2GeometryBuilderV2::SetSensitiveVolumes()
{
-// Defines the sensitive volumes for station2 chambers.
-// ---
+/// Defines the sensitive volumes for station2 chambers.
- GetGeometry(2)->SetSensitiveVolume("C3G0");
- GetGeometry(2)->SetSensitiveVolume("C3G1");
- GetGeometry(2)->SetSensitiveVolume("C3G2");
+ GetGeometry(2)->SetSensitiveVolume("SC3G0");
+ GetGeometry(2)->SetSensitiveVolume("SC3G1");
+ GetGeometry(2)->SetSensitiveVolume("SC3G2");
- GetGeometry(3)->SetSensitiveVolume("C4G0");
- GetGeometry(3)->SetSensitiveVolume("C4G1");
- GetGeometry(3)->SetSensitiveVolume("C4G2");
+ GetGeometry(3)->SetSensitiveVolume("SC4G0");
+ GetGeometry(3)->SetSensitiveVolume("SC4G1");
+ GetGeometry(3)->SetSensitiveVolume("SC4G2");
}
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff