// $Id$
-// -----------------------------------
-// Class AliMUONTriggerGeometryBuilder
+//-----------------------------------------------------------------------------
+/// Class AliMUONTriggerGeometryBuilder
// -----------------------------------
// MUON Trigger stations geometry
// construction class.
// Author: Philippe Crochet (LPCCFd)
+// Support for trigger chambers added April 07 by Enrico Scomparin (INFN To)
+//-----------------------------------------------------------------------------
#include <TVirtualMC.h>
#include <TGeoMatrix.h>
: AliMUONVGeometryBuilder(16, 4),
fMUON(muon)
{
-// Standard constructor
+/// Standard constructor
}
: AliMUONVGeometryBuilder(),
fMUON(0)
{
-// Default constructor
+/// Default constructor
}
//______________________________________________________________________________
-AliMUONTriggerGeometryBuilder::~AliMUONTriggerGeometryBuilder() {
-//
+AliMUONTriggerGeometryBuilder::~AliMUONTriggerGeometryBuilder()
+{
+/// Destructor
}
//
//______________________________________________________________________________
void AliMUONTriggerGeometryBuilder::CreateGeometry()
{
-// From AliMUONv1::CreateGeometry()
+/// From AliMUONv1::CreateGeometry()
/*
zpos1 and zpos2 are the middle of the first and second
Int_t *idtmed = fMUON->GetIdtmed()->GetArray()-1099;
Int_t idAir= idtmed[1100]; // medium 1
Int_t idAlu1=idtmed[1103]; // medium 4
+ Int_t idInox = idtmed[1128]; // medium 29 Stainless Steel (18%Cr,9%Ni,Fe)
+
Int_t detElemId=0; // Detection Element Number
Float_t tpar[3];
Double_t dpar[3];
-
+ Double_t spar[3];
+ Double_t ppar[3];
+
// vertical gap between right and left chambers (kDXZERO*2=4cm)
const Float_t kDXZERO=2.;
// main distances for chamber definition in first plane/first station
const Float_t kZm=-3.6;
const Float_t kZp=+3.6;
+// y positions of vertical supports
+ const Float_t kYVSup[4]={61.45,122.45,192.95,236.95};
+// dimensions of vertical supports
+ const Float_t kSizeVSupExt[3]={1.5,1.5,306.+5.};
+ const Float_t kSizeVSupInt[3]={1.2,1.2,306.+5.};
+// transverse dimensions of angular supports
+ const Float_t kSizeSupport1V[3]={0.,1.5,0.1};
+ const Float_t kSizeSupport1H[3]={0.,0.1,1.2}; // z should be 1.4 in the installed set-up
+ const Float_t kSizeSupport2V[3]={0.,3.0,0.1};
+ const Float_t kSizeSupport2H[3]={0.,0.1,1.9};
+ const Float_t kSizeSupportXV[3]={0.,1.25,0.25};
+ const Float_t kSizeSupportXH[3]={0.,0.25,1.5};
+// transverse dimensions of horizontal cable supports
+ const Float_t kSizeSupportCable[3]={0.,2.,3.};
+// dimensions of gas pipes (inner and outer radius)
+ const Float_t kSizeGasPipe[3]={0.2,0.4,0.};
+// Position of gas pipe with respect to angular support
+ const Float_t kOffsetGasPipe=0.75;
+// Small cut on some volumes to avoid extrusion from SC1x
+ const Float_t kAvoidExtrusion=2.7;
+
Float_t zpos1= AliMUONConstants::DefaultChamberZ(10);
Double_t dstation = ( ( - AliMUONConstants::DefaultChamberZ(11)) -
( - AliMUONConstants::DefaultChamberZ(10)) ) /2.1;
tpar[2] = 0.3;
gMC->Gsposp(volBak,1,volAlu,0.,0.,0.,0,"ONLY",tpar,3);
+// RPC supports (vertical)
+
+ char volAluSupport[5],volAirSupport[5];
+ sprintf(volAluSupport,"SAL%d",icount+1);
+ sprintf(volAirSupport,"SAI%d",icount+1);
+ char volEnvSupport[12][5];
+ for(Int_t jj=0;jj<2;jj++)
+ for(Int_t ii=0;ii<8;ii++){
+ sprintf(volEnvSupport[ii],"A%dV%d",icount+1,ii);
+ }
+ tpar[0]= 0.;
+ tpar[1]= 0.;
+ tpar[2]= 0.;
+ gMC->Gsvolu(volAluSupport,"BOX",idAlu1,tpar,0);
+ gMC->Gsvolu(volAirSupport,"BOX",idAir,tpar,0);
+ tpar[0]=kSizeVSupInt[0];
+ tpar[1]=kSizeVSupInt[1];
+ tpar[2]=-1.;
+ gMC->Gsposp(volAirSupport,1,volAluSupport,0.,0.,0.,0,"ONLY",tpar,3);
+
+ TGeoRotation rsupportv;
+ rsupportv.SetAngles(0.,90.,0.);
+ dpar[0]=kSizeVSupExt[0];
+ dpar[1]=kSizeVSupExt[1];
+ dpar[2]=kSizeVSupExt[2]*zRatio;
+ for(Int_t ii=0;ii<4;ii++){
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSupport[ii], 0, true,
+ TGeoTranslation(-kYVSup[ii]*zRatio,0.,0.),rsupportv);
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluSupport,volEnvSupport[ii],iVolNum++,3, dpar);
+ }
+ for(Int_t ii=4;ii<8;ii++){
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSupport[ii], 0, true,
+ TGeoTranslation(kYVSup[ii-4]*zRatio,0.,0.),rsupportv);
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluSupport,volEnvSupport[ii],iVolNum++,3, dpar);
+ }
+
+// RPC supports (horizontal)
+
+// supports for cables
+ char volAluSupportH[6],volAirSupportH[6];
+ sprintf(volAluSupportH,"SALH%d",icount+1);
+ sprintf(volAirSupportH,"SAIH%d",icount+1);
+ char volEnvSupportHA[6][7],volEnvSupportHBC[12][7],volEnvSupportHD[12][7],volEnvSupportHE[12][7],volEnvSupportHF[12][7];
+ for(Int_t jj=0;jj<2;jj++){
+ for(Int_t ii=0;ii<6;ii++){
+ if(ii<3)sprintf(volEnvSupportHA[3*jj+ii],"A%dHA%d",icount+1,3*jj+ii);
+ sprintf(volEnvSupportHBC[6*jj+ii],"A%dHB%d",icount+1,6*jj+ii);
+ sprintf(volEnvSupportHD[6*jj+ii],"A%dHD%d",icount+1,6*jj+ii);
+ sprintf(volEnvSupportHE[6*jj+ii],"A%dHE%d",icount+1,6*jj+ii);
+ sprintf(volEnvSupportHF[6*jj+ii],"A%dHF%d",icount+1,6*jj+ii);
+ }
+ }
+ tpar[0]= 0.;
+ tpar[1]= 0.;
+ tpar[2]= 0.;
+ gMC->Gsvolu(volAluSupportH,"BOX",idAlu1,tpar,0);
+ gMC->Gsvolu(volAirSupportH,"BOX",idAir,tpar,0);
+ tpar[0]=-1.;
+ tpar[1]=1.9;
+ tpar[2]=2.8;
+ gMC->Gsposp(volAirSupportH,1,volAluSupportH,0.,0.,0.,0,"ONLY",tpar,3);
+
+// Angular supports for chambers
+ char volAluAngSupport1V[6],volAluAngSupport1H[6];
+ sprintf(volAluAngSupport1H,"SA1H%d",icount+1);
+ sprintf(volAluAngSupport1V,"SA1V%d",icount+1);
+ char volAluAngSupport2V[6],volAluAngSupport2H[6];
+ sprintf(volAluAngSupport2H,"SA2H%d",icount+1);
+ sprintf(volAluAngSupport2V,"SA2V%d",icount+1);
+ char volAluAngSupport3V[6],volAluAngSupport3H[6];
+ sprintf(volAluAngSupport3H,"SA3H%d",icount+1);
+ sprintf(volAluAngSupport3V,"SA3V%d",icount+1);
+ char volAluAngSupport4V[6],volAluAngSupport4H[6];
+ sprintf(volAluAngSupport4H,"SA4H%d",icount+1);
+ sprintf(volAluAngSupport4V,"SA4V%d",icount+1);
+ char volAluAngSupportXV[6],volAluAngSupportXH[6];
+ sprintf(volAluAngSupportXH,"SAXH%d",icount+1);
+ sprintf(volAluAngSupportXV,"SAXV%d",icount+1);
+ char volEnvSuppAng1HA[2][6],volEnvSuppAng1HBC[4][6],volEnvSuppAng1HD[4][6],volEnvSuppAng1HE[4][6],volEnvSuppAng1HF[4][6];
+ char volEnvSuppAng1VA[2][6],volEnvSuppAng1VBC[4][6],volEnvSuppAng1VD[4][6],volEnvSuppAng1VE[4][6],volEnvSuppAng1VF[4][6];
+ char volEnvSuppAng2HA[2][6],volEnvSuppAng2HBC[4][6],volEnvSuppAng2HD[4][6],volEnvSuppAng2HE[4][6],volEnvSuppAng2HF[4][6];
+ char volEnvSuppAng2VA[2][6],volEnvSuppAng2VBC[4][6],volEnvSuppAng2VD[4][6],volEnvSuppAng2VE[4][6],volEnvSuppAng2VF[4][6];
+ char volEnvSuppAng3HA[2][6],volEnvSuppAng3HBC[4][6],volEnvSuppAng3HD[4][6],volEnvSuppAng3HE[4][6],volEnvSuppAng3HF[4][6];
+ char volEnvSuppAng3VA[2][6],volEnvSuppAng3VBC[4][6],volEnvSuppAng3VD[4][6],volEnvSuppAng3VE[4][6],volEnvSuppAng3VF[4][6];
+ char volEnvSuppAng4HA[2][6],volEnvSuppAng4HBC[4][6],volEnvSuppAng4HD[4][6],volEnvSuppAng4HE[4][6],volEnvSuppAng4HF[4][6];
+ char volEnvSuppAng4VA[2][6],volEnvSuppAng4VBC[4][6],volEnvSuppAng4VD[4][6],volEnvSuppAng4VE[4][6],volEnvSuppAng4VF[4][6];
+ char volEnvSuppAngXHA[2][6],volEnvSuppAngXHBC[4][6],volEnvSuppAngXHD[4][6],volEnvSuppAngXHE[4][6],volEnvSuppAngXHF[4][6];
+ char volEnvSuppAngXVA[2][6],volEnvSuppAngXVBC[4][6],volEnvSuppAngXVD[4][6],volEnvSuppAngXVE[4][6],volEnvSuppAngXVF[4][6];
+ for(Int_t ii=0;ii<4;ii++){
+ if(ii<2)sprintf(volEnvSuppAng1HA[ii],"H1%dA%d",icount+1,ii);
+ sprintf(volEnvSuppAng1HBC[ii],"H1%dB%d",icount+1,ii);
+ sprintf(volEnvSuppAng1HD[ii],"H1%dD%d",icount+1,ii);
+ sprintf(volEnvSuppAng1HE[ii],"H1%dE%d",icount+1,ii);
+ sprintf(volEnvSuppAng1HF[ii],"H1%dF%d",icount+1,ii);
+ if(ii<2)sprintf(volEnvSuppAng1VA[ii],"V1%dA%d",icount+1,ii);
+ sprintf(volEnvSuppAng1VBC[ii],"V1%dB%d",icount+1,ii);
+ sprintf(volEnvSuppAng1VD[ii],"V1%dD%d",icount+1,ii);
+ sprintf(volEnvSuppAng1VE[ii],"V1%dE%d",icount+1,ii);
+ sprintf(volEnvSuppAng1VF[ii],"V1%dF%d",icount+1,ii);
+ if(ii<2)sprintf(volEnvSuppAng2HA[ii],"H2%dA%d",icount+1,ii);
+ sprintf(volEnvSuppAng2HBC[ii],"H2%dB%d",icount+1,ii);
+ sprintf(volEnvSuppAng2HD[ii],"H2%dD%d",icount+1,ii);
+ sprintf(volEnvSuppAng2HE[ii],"H2%dE%d",icount+1,ii);
+ sprintf(volEnvSuppAng2HF[ii],"H2%dF%d",icount+1,ii);
+ if(ii<2)sprintf(volEnvSuppAng2VA[ii],"V2%dA%d",icount+1,ii);
+ sprintf(volEnvSuppAng2VBC[ii],"V2%dB%d",icount+1,ii);
+ sprintf(volEnvSuppAng2VD[ii],"V2%dD%d",icount+1,ii);
+ sprintf(volEnvSuppAng2VE[ii],"V2%dE%d",icount+1,ii);
+ sprintf(volEnvSuppAng2VF[ii],"V2%dF%d",icount+1,ii);
+ if(ii<2)sprintf(volEnvSuppAng3HA[ii],"H3%dA%d",icount+1,ii);
+ sprintf(volEnvSuppAng3HBC[ii],"H3%dB%d",icount+1,ii);
+ sprintf(volEnvSuppAng3HD[ii],"H3%dD%d",icount+1,ii);
+ sprintf(volEnvSuppAng3HE[ii],"H3%dE%d",icount+1,ii);
+ sprintf(volEnvSuppAng3HF[ii],"H3%dF%d",icount+1,ii);
+ if(ii<2)sprintf(volEnvSuppAng3VA[ii],"V3%dA%d",icount+1,ii);
+ sprintf(volEnvSuppAng3VBC[ii],"V3%dB%d",icount+1,ii);
+ sprintf(volEnvSuppAng3VD[ii],"V3%dD%d",icount+1,ii);
+ sprintf(volEnvSuppAng3VE[ii],"V3%dE%d",icount+1,ii);
+ sprintf(volEnvSuppAng3VF[ii],"V3%dF%d",icount+1,ii);
+ if(ii<2)sprintf(volEnvSuppAng4HA[ii],"H4%dA%d",icount+1,ii);
+ sprintf(volEnvSuppAng4HBC[ii],"H4%dB%d",icount+1,ii);
+ sprintf(volEnvSuppAng4HD[ii],"H4%dD%d",icount+1,ii);
+ sprintf(volEnvSuppAng4HE[ii],"H4%dE%d",icount+1,ii);
+ sprintf(volEnvSuppAng4HF[ii],"H4%dF%d",icount+1,ii);
+ if(ii<2)sprintf(volEnvSuppAng4VA[ii],"V4%dA%d",icount+1,ii);
+ sprintf(volEnvSuppAng4VBC[ii],"V4%dB%d",icount+1,ii);
+ sprintf(volEnvSuppAng4VD[ii],"V4%dD%d",icount+1,ii);
+ sprintf(volEnvSuppAng4VE[ii],"V4%dE%d",icount+1,ii);
+ sprintf(volEnvSuppAng4VF[ii],"V4%dF%d",icount+1,ii);
+ if(ii<2)sprintf(volEnvSuppAngXHA[ii],"HX%dA%d",icount+1,ii);
+ sprintf(volEnvSuppAngXHBC[ii],"HX%dB%d",icount+1,ii);
+ sprintf(volEnvSuppAngXHD[ii],"HX%dD%d",icount+1,ii);
+ sprintf(volEnvSuppAngXHE[ii],"HX%dE%d",icount+1,ii);
+ sprintf(volEnvSuppAngXHF[ii],"HX%dF%d",icount+1,ii);
+ if(ii<2)sprintf(volEnvSuppAngXVA[ii],"VX%dA%d",icount+1,ii);
+ sprintf(volEnvSuppAngXVBC[ii],"VX%dB%d",icount+1,ii);
+ sprintf(volEnvSuppAngXVD[ii],"VX%dD%d",icount+1,ii);
+ sprintf(volEnvSuppAngXVE[ii],"VX%dE%d",icount+1,ii);
+ sprintf(volEnvSuppAngXVF[ii],"VX%dF%d",icount+1,ii);
+ }
+ tpar[0]= 0.;
+ tpar[1]= 0.;
+ tpar[2]= 0.;
+ gMC->Gsvolu(volAluAngSupport1V,"BOX",idAlu1,tpar,0);
+ gMC->Gsvolu(volAluAngSupport1H,"BOX",idAlu1,tpar,0);
+ gMC->Gsvolu(volAluAngSupport2V,"BOX",idAlu1,tpar,0);
+ gMC->Gsvolu(volAluAngSupport2H,"BOX",idAlu1,tpar,0);
+ gMC->Gsvolu(volAluAngSupport3V,"BOX",idAlu1,tpar,0);
+ gMC->Gsvolu(volAluAngSupport3H,"BOX",idAlu1,tpar,0);
+ gMC->Gsvolu(volAluAngSupport4V,"BOX",idAlu1,tpar,0);
+ gMC->Gsvolu(volAluAngSupport4H,"BOX",idAlu1,tpar,0);
+ gMC->Gsvolu(volAluAngSupportXV,"BOX",idAlu1,tpar,0);
+ gMC->Gsvolu(volAluAngSupportXH,"BOX",idAlu1,tpar,0);
+
+// gas pipes
+ char volInoxGasPipe[6];
+ sprintf(volInoxGasPipe,"PINO%d",icount+1);
+ char volEnvInoxGasPipe1A[2][6],volEnvInoxGasPipe1BC[4][7],volEnvInoxGasPipe1D[4][6],volEnvInoxGasPipe1E[4][6],volEnvInoxGasPipe1F[4][6];
+ char volEnvInoxGasPipe2A[2][6],volEnvInoxGasPipe2BC[4][7],volEnvInoxGasPipe2D[4][6],volEnvInoxGasPipe2E[4][6],volEnvInoxGasPipe2F[4][6];
+ for(Int_t ii=0;ii<4;ii++){
+ if(ii<2)sprintf(volEnvInoxGasPipe1A[ii],"P1%dA%d",icount+1,ii);
+ sprintf(volEnvInoxGasPipe1BC[ii],"P1%dBC%d",icount+1,ii);
+ sprintf(volEnvInoxGasPipe1D[ii],"P1%dD%d",icount+1,ii);
+ sprintf(volEnvInoxGasPipe1E[ii],"P1%dE%d",icount+1,ii);
+ sprintf(volEnvInoxGasPipe1F[ii],"P1%dF%d",icount+1,ii);
+ }
+ for(Int_t ii=0;ii<4;ii++){
+ if(ii<2)sprintf(volEnvInoxGasPipe2A[ii],"P2%dA%d",icount+1,ii);
+ sprintf(volEnvInoxGasPipe2BC[ii],"P2%dBC%d",icount+1,ii);
+ sprintf(volEnvInoxGasPipe2D[ii],"P2%dD%d",icount+1,ii);
+ sprintf(volEnvInoxGasPipe2E[ii],"P2%dE%d",icount+1,ii);
+ sprintf(volEnvInoxGasPipe2F[ii],"P2%dF%d",icount+1,ii);
+ }
+ tpar[0]= 0.;
+ tpar[1]= 0.;
+ tpar[2]= 0.;
+ gMC->Gsvolu(volInoxGasPipe,"TUBE",idInox,tpar,0);
+ TGeoRotation rsupportpipe;
+ rsupportpipe.SetAngles(90.,90.,0.);
+
+
// chamber type A
Float_t xEnv = (kDXZERO+kXMED+(kXMAX-kXMED)/2.)*zRatio;
Float_t yEnvM = 0.; // y low position of envelope in chamber
GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv[4],iVolNum++,3, dpar);
GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv[13],iVolNum++,3, dpar);
+// horizontal cable support chamber type A
+
+ spar[0]=((kXMAX/2)-kYVSup[0]/2.)*zRatio;
+ spar[1]=kSizeSupportCable[1];
+ spar[2]=kSizeSupportCable[2];
+ Float_t offsetSuppA = ((kXMAX-kXMED)/2.)*zRatio-(((kXMAX/2)-kYVSup[0]/2.)*zRatio);
+ for(Int_t in=0;in<3;in++){
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSupportHA[in], 0, true,
+ TGeoTranslation(xEnv+offsetSuppA/2.,yEnvP+dpar[1]/2.*(in-1),-(kSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSupportHA[in+3], 0, true,
+ TGeoTranslation(-(xEnv+offsetSuppA/2.),yEnvM+dpar[1]/2.*(in-1),kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ }
+ for(Int_t ii=0;ii<6;ii++)
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluSupportH,volEnvSupportHA[ii],iVolNum++,3, spar);
+
+// angular supports chamber type A
+// 1 vertical
+
+ spar[0]=dpar[0];
+ spar[1]=kSizeSupport1V[1];
+ spar[2]=kSizeSupport1V[2];
+ Float_t sparysave=spar[1];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1VA[0], 0, true,
+ TGeoTranslation(xEnv,yEnvP-dpar[1],kZp+dpar[2]+spar[2]/2.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1VA[1], 0, true,
+ TGeoTranslation(-xEnv,yEnvM-dpar[1],kZm-dpar[2]-spar[2]/2.),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport1V,volEnvSuppAng1VA[0],iVolNum++,3, spar);
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport1V,volEnvSuppAng1VA[1],iVolNum++,3, spar);
+
+// 1 horizontal
+
+ spar[0]=dpar[0];
+ spar[1]=kSizeSupport1H[1];
+ spar[2]=kSizeSupport1H[2];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1HA[0], 0, true,
+ TGeoTranslation(xEnv,yEnvP-dpar[1]-sparysave,kZp+dpar[2]-spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1HA[1], 0, true,
+ TGeoTranslation(-xEnv,yEnvM-dpar[1]-sparysave,kZm-(dpar[2]-spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport1H,volEnvSuppAng1HA[0],iVolNum++,3, spar);
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport1H,volEnvSuppAng1HA[1],iVolNum++,3, spar);
+
+// gas pipe (low)
+ ppar[0]=kSizeGasPipe[0];
+ ppar[1]=kSizeGasPipe[1];
+ ppar[2]=dpar[0];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe1A[0], 0, true,
+ TGeoTranslation(xEnv,yEnvP-dpar[1]-sparysave-kOffsetGasPipe,kZp),rsupportpipe);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe1A[1], 0, true,
+ TGeoTranslation(-xEnv,yEnvM-dpar[1]-sparysave-kOffsetGasPipe,kZm),rsupportpipe);
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volInoxGasPipe,volEnvInoxGasPipe1A[0],iVolNum++,3, ppar);
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volInoxGasPipe,volEnvInoxGasPipe1A[1],iVolNum++,3, ppar);
+
+// 2 vertical
+
+ spar[0]=dpar[0];
+ spar[1]=kSizeSupport2V[1];
+ spar[2]=kSizeSupport2V[2];
+ sparysave=spar[1];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2VA[0], 0, true,
+ TGeoTranslation(xEnv,yEnvP-dpar[1],kSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2VA[1], 0, true,
+ TGeoTranslation(-xEnv,yEnvM-dpar[1],-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport2V,volEnvSuppAng2VA[0],iVolNum++,3, spar);
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport2V,volEnvSuppAng2VA[1],iVolNum++,3, spar);
+
+// 2 horizontal
+
+ spar[0]=dpar[0];
+ spar[1]=kSizeSupport2H[1];
+ spar[2]=kSizeSupport2H[2];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2HA[0], 0, true,
+ TGeoTranslation(xEnv,yEnvP-dpar[1]-sparysave,kSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2HA[1], 0, true,
+ TGeoTranslation(-xEnv,yEnvM-dpar[1]-sparysave,-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport2H,volEnvSuppAng2HA[0],iVolNum++,3, spar);
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport2H,volEnvSuppAng2HA[1],iVolNum++,3, spar);
+
+// 3 vertical
+
+ spar[0]=dpar[0];
+ spar[1]=kSizeSupport1V[1];
+ spar[2]=kSizeSupport1V[2];
+ sparysave=spar[1];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3VA[0], 0, true,
+ TGeoTranslation(xEnv,yEnvP+dpar[1],kZp+dpar[2]+spar[2]/2.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3VA[1], 0, true,
+ TGeoTranslation(-xEnv,yEnvM+dpar[1],kZm-dpar[2]-spar[2]/2.),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport3V,volEnvSuppAng3VA[0],iVolNum++,3, spar);
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport3V,volEnvSuppAng3VA[1],iVolNum++,3, spar);
+
+// 3 horizontal
+
+ spar[0]=dpar[0];
+ spar[1]=kSizeSupport1H[1];
+ spar[2]=kSizeSupport1H[2];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3HA[0], 0, true,
+ TGeoTranslation(xEnv,yEnvP+dpar[1]+sparysave,kZp+dpar[2]-spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3HA[1], 0, true,
+ TGeoTranslation(-xEnv,yEnvM+dpar[1]+sparysave,kZm-(dpar[2]-spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport3H,volEnvSuppAng3HA[0],iVolNum++,3, spar);
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport3H,volEnvSuppAng3HA[1],iVolNum++,3, spar);
+
+// gas pipe (high)
+ ppar[0]=kSizeGasPipe[0];
+ ppar[1]=kSizeGasPipe[1];
+ ppar[2]=dpar[0];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe2A[0], 0, true,
+ TGeoTranslation(xEnv,yEnvP+dpar[1]+sparysave+kOffsetGasPipe,kZp),rsupportpipe);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe2A[1], 0, true,
+ TGeoTranslation(-xEnv,yEnvM+dpar[1]+sparysave+kOffsetGasPipe,kZm),rsupportpipe);
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volInoxGasPipe,volEnvInoxGasPipe2A[0],iVolNum++,3, ppar);
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volInoxGasPipe,volEnvInoxGasPipe2A[1],iVolNum++,3, ppar);
+
+// 4 vertical
+
+ spar[0]=dpar[0];
+ spar[1]=kSizeSupport2V[1];
+ spar[2]=kSizeSupport2V[2];
+ sparysave=spar[1];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4VA[0], 0, true,
+ TGeoTranslation(xEnv,yEnvP+dpar[1],kSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4VA[1], 0, true,
+ TGeoTranslation(-xEnv,yEnvM+dpar[1],-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport4V,volEnvSuppAng4VA[0],iVolNum++,3, spar);
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport4V,volEnvSuppAng4VA[1],iVolNum++,3, spar);
+
+// 4 horizontal
+
+ spar[0]=dpar[0];
+ spar[1]=kSizeSupport2H[1];
+ spar[2]=kSizeSupport2H[2];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4HA[0], 0, true,
+ TGeoTranslation(xEnv,yEnvP+dpar[1]+sparysave,kSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4HA[1], 0, true,
+ TGeoTranslation(-xEnv,yEnvM+dpar[1]+sparysave,-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport4H,volEnvSuppAng4HA[0],iVolNum++,3, spar);
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport4H,volEnvSuppAng4HA[1],iVolNum++,3, spar);
+
+// X horizontal
+ spar[0]=(kYVSup[3]-kYVSup[0])/2.*zRatio;
+ spar[1]=kSizeSupportXH[1];
+ spar[2]=kSizeSupportXH[2];
+ Float_t sparysavex=spar[1];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXHA[0], 0, true,
+ TGeoTranslation(spar[0]+kYVSup[0]*zRatio,yEnvP+dpar[1]+sparysave+1.0,kSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXHA[1], 0, true,
+ TGeoTranslation(-(spar[0]+kYVSup[0]*zRatio),yEnvM+dpar[1]+sparysave+1.0,-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupportXH,volEnvSuppAngXHA[0],iVolNum++,3, spar);
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupportXH,volEnvSuppAngXHA[1],iVolNum++,3, spar);
+
+// X vertical
+ spar[0]=(kYVSup[3]-kYVSup[0])/2.*zRatio;
+ spar[1]=kSizeSupportXV[1];
+ spar[2]=kSizeSupportXV[2];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXVA[0], 0, true,
+ TGeoTranslation(spar[0]+kYVSup[0]*zRatio,yEnvP+dpar[1]+sparysave+1.0+sparysavex+spar[1],kSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXVA[1], 0, true,
+ TGeoTranslation(-(spar[0]+kYVSup[0]*zRatio),yEnvM+dpar[1]+sparysave+1.0+sparysavex+spar[1],-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupportXV,volEnvSuppAngXVA[0],iVolNum++,3, spar);
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupportXV,volEnvSuppAngXVA[1],iVolNum++,3, spar);
+
// chamber type B (plus envelope chambers B & C)
xEnv = (kDXZERO+kXMAX/2.)*zRatio;
yEnvPsave = yEnvP;
yEnvM = (yEnvPsave + kYMIN * zRatio ) * zmp + kYMIN * zRatio;
dpar[0] = ((kXMAX-kXMIN)/2.) * zRatio;
dpar[1] = ((kYMAX-kYMIN)/2.) * zRatio;
+ Float_t dysave = dpar[1];
+ Float_t dxsave = dpar[0];
xpos = kXMIN/2. * zRatio;
ypos = (kYMIN - kYMIN/4.) * zRatio;
+ Float_t xpossave = xpos;
detElemId = (10+icount+1)*100+17;
GetEnvelopes(16+icount)->AddEnvelope(volEnv[3], detElemId, true, TGeoTranslation( xEnv,-yEnvM,kZm));
GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv[12],iVolNum++,TGeoTranslation(xpos, ypos,0.),3,dpar);
GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv[14],iVolNum++,TGeoTranslation(xpos,-ypos,0.),3,dpar);
+
// chamber type C (note: same Z than type B)
dpar[0] = (kXMAX/2)*zRatio;
dpar[1] = (kYMAX/2)*zRatio;
GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv[12],iVolNum++,TGeoTranslation(xpos,-ypos,0.),3,dpar);
GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv[14],iVolNum++,TGeoTranslation(xpos, ypos,0.),3,dpar);
+// horizontal cable support chamber type B+C
+
+ spar[0]=dpar[0]-kYVSup[0]/2.;
+ spar[1]=kSizeSupportCable[1];
+ spar[2]=kSizeSupportCable[2];
+ for(Int_t in=0;in<3;in++){
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSupportHBC[in], 0, true, TGeoTranslation(xEnv+kYVSup[0]/2.*zRatio,-(yEnvM+(kYMAX-kYMIN/2.*zRatio)/2.*(in-1)),kSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSupportHBC[in+3], 0, true, TGeoTranslation(xEnv+kYVSup[0]/2.*zRatio, yEnvM+(kYMAX-kYMIN/2.*zRatio)/2.*(in-1),kSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSupportHBC[in+6], 0, true, TGeoTranslation(-(xEnv+kYVSup[0]/2.*zRatio),-(yEnvP+(kYMAX-kYMIN/2.*zRatio)/2.*(in-1)),-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSupportHBC[in+9], 0, true, TGeoTranslation(-(xEnv+kYVSup[0]/2.*zRatio), yEnvP+(kYMAX-kYMIN/2.*zRatio)/2.*(in-1),-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ }
+ for(Int_t ii=0;ii<12;ii++)
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluSupportH,volEnvSupportHBC[ii],iVolNum++,3, spar);
+
+// angular supports chamber type B and C
+// C
+// 1 vertical
+ spar[0]=dpar[0];
+ spar[1]=kSizeSupport1V[1];
+ spar[2]=kSizeSupport1V[2];
+ sparysave=spar[1];
+
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1VBC[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvM-dpar[1]-dysave,kZm-dpar[2]-spar[2]/2.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1VBC[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvP-dpar[1]-dysave,kZp+dpar[2]+spar[2]/2.),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport1V,volEnvSuppAng1VBC[0],iVolNum++,3, spar);
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport1V,volEnvSuppAng1VBC[2],iVolNum++,3, spar);
+
+// 1 horizontal
+ spar[0]=dpar[0];
+ spar[1]=kSizeSupport1H[1];
+ spar[2]=kSizeSupport1H[2];
+
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1HBC[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvM-dpar[1]-dysave-sparysave,kZm-(dpar[2]-spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1HBC[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvP-dpar[1]-dysave-sparysave,kZp+dpar[2]-spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport1H,volEnvSuppAng1HBC[0],iVolNum++,3, spar);
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport1H,volEnvSuppAng1HBC[2],iVolNum++,3, spar);
+
+// gas pipe (low)
+ ppar[0]=kSizeGasPipe[0];
+ ppar[1]=kSizeGasPipe[1];
+ ppar[2]=dpar[0];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe1BC[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvM-dpar[1]-dysave-sparysave-kOffsetGasPipe,kZm),rsupportpipe);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe1BC[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvP-dpar[1]-dysave-sparysave-kOffsetGasPipe,kZp),rsupportpipe);
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volInoxGasPipe,volEnvInoxGasPipe1BC[0],iVolNum++,3, ppar);
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volInoxGasPipe,volEnvInoxGasPipe1BC[2],iVolNum++,3, ppar);
+
+// 2 vertical
+ spar[0]=dpar[0];
+ spar[1]=kSizeSupport2V[1];
+ spar[2]=kSizeSupport2V[2];
+ sparysave=spar[1];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2VBC[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvM-dpar[1]-dysave,-(kSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2VBC[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvP-dpar[1]-dysave,kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport2V,volEnvSuppAng2VBC[0],iVolNum++,3, spar);
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport2V,volEnvSuppAng2VBC[2],iVolNum++,3, spar);
+
+// 2 horizontal
+ spar[0]=dpar[0];
+ spar[1]=kSizeSupport2H[1];
+ spar[2]=kSizeSupport2H[2];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2HBC[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvM-dpar[1]-dysave-sparysave,-(kSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2HBC[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvP-dpar[1]-dysave-sparysave,kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport2H,volEnvSuppAng2HBC[0],iVolNum++,3, spar);
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport2H,volEnvSuppAng2HBC[2],iVolNum++,3, spar);
+
+// 3 vertical
+ spar[0]=dxsave-kAvoidExtrusion;
+ spar[1]=kSizeSupport1V[1];
+ spar[2]=kSizeSupport1V[2];
+ sparysave=spar[1];
+
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3VBC[0], 0, true,
+ TGeoTranslation(xEnv+xpossave,-yEnvM+dpar[1]+dysave,kZm-dpar[2]-spar[2]/2.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3VBC[2], 0, true,
+ TGeoTranslation(-xEnv-xpossave,-yEnvP+dpar[1]+dysave,kZp+dpar[2]+spar[2]/2.),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport3V,volEnvSuppAng3VBC[0],iVolNum++,3, spar);
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport3V,volEnvSuppAng3VBC[2],iVolNum++,3, spar);
+
+// 3 horizontal
+ spar[0]=dxsave-kAvoidExtrusion;
+ spar[1]=kSizeSupport1H[1];
+ spar[2]=kSizeSupport1H[2];
+
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3HBC[0], 0, true,
+ TGeoTranslation(xEnv+xpossave,-yEnvM+dpar[1]+dysave+sparysave,kZm-(dpar[2]-spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3HBC[2], 0, true,
+ TGeoTranslation(-xEnv-xpossave,-yEnvP+dpar[1]+dysave+sparysave,kZp+dpar[2]-spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport3H,volEnvSuppAng3HBC[0],iVolNum++,3, spar);
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport3H,volEnvSuppAng3HBC[2],iVolNum++,3, spar);
+
+// gas pipe (high)
+ ppar[0]=kSizeGasPipe[0];
+ ppar[1]=kSizeGasPipe[1];
+ ppar[2]=dxsave-kAvoidExtrusion;
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe2BC[0], 0, true,
+ TGeoTranslation(xEnv+xpossave,-yEnvM+dpar[1]+dysave+sparysave+kOffsetGasPipe,kZm),rsupportpipe);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe2BC[2], 0, true,
+ TGeoTranslation(-xEnv-xpossave,-yEnvP+dpar[1]+dysave+sparysave+kOffsetGasPipe,kZp),rsupportpipe);
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volInoxGasPipe,volEnvInoxGasPipe2BC[0],iVolNum++,3, ppar);
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volInoxGasPipe,volEnvInoxGasPipe2BC[2],iVolNum++,3, ppar);
+
+// 4 vertical
+ spar[0]=dxsave-kAvoidExtrusion;
+ spar[1]=kSizeSupport2V[1];
+ spar[2]=kSizeSupport2V[2];
+ sparysave=spar[1];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4VBC[0], 0, true,
+ TGeoTranslation(xEnv+xpossave,-yEnvM+dpar[1]+dysave,-(kSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4VBC[2], 0, true,
+ TGeoTranslation(-xEnv-xpossave,-yEnvP+dpar[1]+dysave,kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport4V,volEnvSuppAng4VBC[0],iVolNum++,3, spar);
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport4V,volEnvSuppAng4VBC[2],iVolNum++,3, spar);
+
+// 4 horizontal
+ spar[0]=dxsave-kAvoidExtrusion;
+ spar[1]=kSizeSupport2H[1];
+ spar[2]=kSizeSupport2H[2];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4HBC[0], 0, true,
+ TGeoTranslation(xEnv+xpossave,-yEnvM+dpar[1]+dysave+sparysave,-(kSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4HBC[2], 0, true,
+ TGeoTranslation(-xEnv-xpossave,-yEnvP+dpar[1]+dysave+sparysave,kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport4H,volEnvSuppAng4HBC[0],iVolNum++,3, spar);
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport4H,volEnvSuppAng4HBC[2],iVolNum++,3, spar);
+
+// X horizontal
+ spar[0]=(kYVSup[3]-kYVSup[0])/2.*zRatio;
+ spar[1]=kSizeSupportXH[1];
+ spar[2]=kSizeSupportXH[2];
+ sparysavex=spar[1];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXHBC[0], 0, true,
+ TGeoTranslation(spar[0]+kYVSup[0]*zRatio,-yEnvM+dpar[1]+dysave+sparysave+1.0,-(kSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXHBC[2], 0, true,
+ TGeoTranslation(-(spar[0]+kYVSup[0]*zRatio),-yEnvP+dpar[1]+dysave+sparysave+1.0,kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupportXH,volEnvSuppAngXHBC[0],iVolNum++,3, spar);
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupportXH,volEnvSuppAngXHBC[2],iVolNum++,3, spar);
+
+// X vertical
+ spar[0]=(kYVSup[3]-kYVSup[0])/2.*zRatio;
+ spar[1]=kSizeSupportXV[1];
+ spar[2]=kSizeSupportXV[2];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXVBC[0], 0, true,
+ TGeoTranslation(spar[0]+kYVSup[0]*zRatio,-yEnvM+dpar[1]+dysave+sparysave+1.0+sparysavex+spar[1],-(kSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXVBC[2], 0, true,
+ TGeoTranslation(-(spar[0]+kYVSup[0]*zRatio),-yEnvP+dpar[1]+dysave+sparysave+1.0+sparysavex+spar[1],kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupportXV,volEnvSuppAngXVBC[0],iVolNum++,3, spar);
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupportXV,volEnvSuppAngXVBC[2],iVolNum++,3, spar);
+
+// B
+// 1 vertical
+ spar[0]=dxsave-kAvoidExtrusion;
+ spar[1]=kSizeSupport1V[1];
+ spar[2]=kSizeSupport1V[2];
+ sparysave=spar[1];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1VBC[1], 0, true,
+ TGeoTranslation(xEnv+xpossave,yEnvM-dpar[1]-dysave,kZm-dpar[2]-spar[2]/2.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1VBC[3], 0, true,
+ TGeoTranslation(-xEnv-xpossave,yEnvP-dpar[1]-dysave,kZp+dpar[2]+spar[2]/2.),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport1V,volEnvSuppAng1VBC[1],iVolNum++,3, spar);
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport1V,volEnvSuppAng1VBC[3],iVolNum++,3, spar);
+
+
+// 1 horizontal
+ spar[0]=dxsave-kAvoidExtrusion;
+ spar[1]=kSizeSupport1H[1];
+ spar[2]=kSizeSupport1H[2];
+
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1HBC[1], 0, true,
+ TGeoTranslation(xEnv+xpossave,yEnvM-dpar[1]-dysave-sparysave,kZm-(dpar[2]-spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1HBC[3], 0, true,
+ TGeoTranslation(-xEnv-xpossave,yEnvP-dpar[1]-dysave-sparysave,kZp+dpar[2]-spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport1H,volEnvSuppAng1HBC[1],iVolNum++,3, spar);
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport1H,volEnvSuppAng1HBC[3],iVolNum++,3, spar);
+
+// gas pipe (low)
+ ppar[0]=kSizeGasPipe[0];
+ ppar[1]=kSizeGasPipe[1];
+ ppar[2]=dxsave-kAvoidExtrusion;
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe1BC[1], 0, true,
+ TGeoTranslation(xEnv+xpossave,yEnvM-dpar[1]-dysave-sparysave-kOffsetGasPipe,kZm),rsupportpipe);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe1BC[3], 0, true,
+ TGeoTranslation(-xEnv-xpossave,yEnvP-dpar[1]-dysave-sparysave-kOffsetGasPipe,kZp),rsupportpipe);
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volInoxGasPipe,volEnvInoxGasPipe1BC[1],iVolNum++,3, ppar);
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volInoxGasPipe,volEnvInoxGasPipe1BC[3],iVolNum++,3, ppar);
+
+// 2 vertical
+ spar[0]=dxsave-kAvoidExtrusion;
+ spar[1]=kSizeSupport2V[1];
+ spar[2]=kSizeSupport2V[2];
+ sparysave=spar[1];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2VBC[1], 0, true,
+ TGeoTranslation(xEnv+xpossave,yEnvM-dpar[1]-dysave,-(kSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2VBC[3], 0, true,
+ TGeoTranslation(-xEnv-xpossave,yEnvP-dpar[1]-dysave,kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport2V,volEnvSuppAng2VBC[1],iVolNum++,3, spar);
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport2V,volEnvSuppAng2VBC[3],iVolNum++,3, spar);
+
+// 2 horizontal
+ spar[0]=dxsave-kAvoidExtrusion;
+ spar[1]=kSizeSupport2H[1];
+ spar[2]=kSizeSupport2H[2];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2HBC[1], 0, true,
+ TGeoTranslation(xEnv+xpossave,yEnvM-dpar[1]-dysave-sparysave,-(kSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2HBC[3], 0, true,
+ TGeoTranslation(-xEnv-xpossave,yEnvP-dpar[1]-dysave-sparysave,kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport2H,volEnvSuppAng2HBC[1],iVolNum++,3, spar);
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport2H,volEnvSuppAng2HBC[3],iVolNum++,3, spar);
+
+// 3 vertical
+ spar[0]=dpar[0];
+ spar[1]=kSizeSupport1V[1];
+ spar[2]=kSizeSupport1V[2];
+ sparysave=spar[1];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3VBC[1], 0, true,
+ TGeoTranslation(xEnv,yEnvM+dpar[1]+dysave,kZm-dpar[2]-spar[2]/2.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3VBC[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvP+dpar[1]+dysave,kZp+dpar[2]+spar[2]/2.),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport3V,volEnvSuppAng3VBC[1],iVolNum++,3, spar);
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport3V,volEnvSuppAng3VBC[3],iVolNum++,3, spar);
+
+// 3 horizontal
+ spar[1]=kSizeSupport1H[1];
+ spar[2]=kSizeSupport1H[2];
+
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3HBC[1], 0, true,
+ TGeoTranslation(xEnv,yEnvM+dpar[1]+dysave+sparysave,kZm-(dpar[2]-spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3HBC[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvP+dpar[1]+dysave+sparysave,kZp+dpar[2]-spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport3H,volEnvSuppAng3HBC[1],iVolNum++,3, spar);
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport3H,volEnvSuppAng3HBC[3],iVolNum++,3, spar);
+
+// gas pipe (high)
+ ppar[0]=kSizeGasPipe[0];
+ ppar[1]=kSizeGasPipe[1];
+ ppar[2]=dpar[0];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe2BC[1], 0, true,
+ TGeoTranslation(xEnv,yEnvM+dpar[1]+dysave+sparysave+kOffsetGasPipe,kZm),rsupportpipe);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe2BC[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvP+dpar[1]+dysave+sparysave+kOffsetGasPipe,kZp),rsupportpipe);
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volInoxGasPipe,volEnvInoxGasPipe2BC[1],iVolNum++,3, ppar);
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volInoxGasPipe,volEnvInoxGasPipe2BC[3],iVolNum++,3, ppar);
+
+// 4 vertical
+ spar[0]=dpar[0];
+ spar[1]=kSizeSupport2V[1];
+ spar[2]=kSizeSupport2V[2];
+ sparysave=spar[1];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4VBC[1], 0, true,
+ TGeoTranslation(xEnv,yEnvM+dpar[1]+dysave,-(kSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4VBC[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvP+dpar[1]+dysave,kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport4V,volEnvSuppAng4VBC[1],iVolNum++,3, spar);
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport4V,volEnvSuppAng4VBC[3],iVolNum++,3, spar);
+
+// 4 horizontal
+ spar[1]=kSizeSupport2H[1];
+ spar[2]=kSizeSupport2H[2];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4HBC[1], 0, true,
+ TGeoTranslation(xEnv,yEnvM+dpar[1]+dysave+sparysave,-(kSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4HBC[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvP+dpar[1]+dysave+sparysave,kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport4H,volEnvSuppAng4HBC[1],iVolNum++,3, spar);
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport4H,volEnvSuppAng4HBC[3],iVolNum++,3, spar);
+
+// X horizontal
+ spar[0]=(kYVSup[3]-kYVSup[0])/2.*zRatio;
+ spar[1]=kSizeSupportXH[1];
+ spar[2]=kSizeSupportXH[2];
+ sparysavex=spar[1];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXHBC[1], 0, true,
+ TGeoTranslation(spar[0]+kYVSup[0]*zRatio,yEnvM+dpar[1]+dysave+sparysave+1.0,-(kSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXHBC[3], 0, true,
+ TGeoTranslation(-(spar[0]+kYVSup[0]*zRatio),yEnvP+dpar[1]+dysave+sparysave+1.0,kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupportXH,volEnvSuppAngXHBC[1],iVolNum++,3, spar);
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupportXH,volEnvSuppAngXHBC[3],iVolNum++,3, spar);
+
+// X vertical
+ spar[0]=(kYVSup[3]-kYVSup[0])/2.*zRatio;
+ spar[1]=kSizeSupportXV[1];
+ spar[2]=kSizeSupportXV[2];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXVBC[1], 0, true,
+ TGeoTranslation(spar[0]+kYVSup[0]*zRatio,yEnvM+dpar[1]+dysave+sparysave+1.0+sparysavex+spar[1],-(kSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXVBC[3], 0, true,
+ TGeoTranslation(-(spar[0]+kYVSup[0]*zRatio),yEnvP+dpar[1]+dysave+sparysave+1.0+sparysavex+spar[1],kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupportXV,volEnvSuppAngXVBC[1],iVolNum++,3, spar);
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupportXV,volEnvSuppAngXVBC[3],iVolNum++,3, spar);
+
+
// chamber type D, E and F (same size)
// D
yEnvPsave = yEnvP;
GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv[11],iVolNum++,3, dpar);
GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv[15],iVolNum++,3, dpar);
+// horizontal cable support chamber type D
+
+ spar[0]=dpar[0]-(kYVSup[0]/2.)*zRatio;
+ spar[1]=kSizeSupportCable[1];
+ spar[2]=kSizeSupportCable[2];
+ for(Int_t in=0;in<3;in++){
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSupportHD[in], 0, true, TGeoTranslation(xEnv+kYVSup[0]/2.*zRatio,-(yEnvP+dpar[1]/2.*(in-1)),-(kSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSupportHD[in+3], 0, true, TGeoTranslation(xEnv+kYVSup[0]/2.*zRatio, yEnvP+dpar[1]/2.*(in-1),-(kSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSupportHD[in+6], 0, true, TGeoTranslation(-(xEnv+kYVSup[0]/2.*zRatio),-(yEnvM+dpar[1]/2.*(in-1)),kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSupportHD[in+9], 0, true, TGeoTranslation(-(xEnv+kYVSup[0]/2.*zRatio),yEnvM+dpar[1]/2.*(in-1),kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ }
+ for(Int_t ii=0;ii<12;ii++)
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluSupportH,volEnvSupportHD[ii],iVolNum++,3, spar);
+
+// angular supports chamber type D
+// 1 vertical
+
+ spar[0]=dpar[0];
+ spar[1]=kSizeSupport1V[1];
+ spar[2]=kSizeSupport1V[2];
+ sparysave=spar[1];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1VD[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvP-dpar[1],kZp+dpar[2]+spar[2]/2.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1VD[1], 0, true,
+ TGeoTranslation(xEnv,yEnvP-dpar[1],kZp+dpar[2]+spar[2]/2.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1VD[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvM-dpar[1],kZm-dpar[2]-spar[2]/2.),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1VD[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvM-dpar[1],kZm-dpar[2]-spar[2]/2.),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ for(Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport1V,volEnvSuppAng1VD[i],iVolNum++,3, spar);
+
+
+// 1 horizontal
+
+ spar[0]=dpar[0];
+ spar[1]=kSizeSupport1H[1];
+ spar[2]=kSizeSupport1H[2];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1HD[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvP-dpar[1]-sparysave,kZp+dpar[2]-spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1HD[1], 0, true,
+ TGeoTranslation(xEnv,yEnvP-dpar[1]-sparysave,kZp+dpar[2]-spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1HD[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvM-dpar[1]-sparysave,kZm-(dpar[2]-spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1HD[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvM-dpar[1]-sparysave,kZm-(dpar[2]-spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ for(Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport1H,volEnvSuppAng1HD[i],iVolNum++,3, spar);
+
+// gas pipe (low)
+ ppar[0]=kSizeGasPipe[0];
+ ppar[1]=kSizeGasPipe[1];
+ ppar[2]=dpar[0];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe1D[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvP-dpar[1]-sparysave-kOffsetGasPipe,kZp),rsupportpipe);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe1D[1], 0, true,
+ TGeoTranslation(xEnv,yEnvP-dpar[1]-sparysave-kOffsetGasPipe,kZp),rsupportpipe);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe1D[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvM-dpar[1]-sparysave-kOffsetGasPipe,kZm),rsupportpipe);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe1D[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvM-dpar[1]-sparysave-kOffsetGasPipe,kZm),rsupportpipe);
+
+ for(Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volInoxGasPipe,volEnvInoxGasPipe1D[i],iVolNum++,3, ppar);
+
+// 2 vertical
+
+ spar[0]=dpar[0];
+ spar[1]=kSizeSupport2V[1];
+ spar[2]=kSizeSupport2V[2];
+ sparysave=spar[1];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2VD[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvP-dpar[1],kSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2VD[1], 0, true,
+ TGeoTranslation(xEnv,yEnvP-dpar[1],kSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2VD[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvM-dpar[1],-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2VD[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvM-dpar[1],-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ for(Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport2V,volEnvSuppAng2VD[i],iVolNum++,3, spar);
+
+// 2 horizontal
+
+ spar[0]=dpar[0];
+ spar[1]=kSizeSupport2H[1];
+ spar[2]=kSizeSupport2H[2];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2HD[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvP-dpar[1]-sparysave,kSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2HD[1], 0, true,
+ TGeoTranslation(xEnv,yEnvP-dpar[1]-sparysave,kSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2HD[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvM-dpar[1]-sparysave,-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2HD[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvM-dpar[1]-sparysave,-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ for(Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport2H,volEnvSuppAng2HD[i],iVolNum++,3, spar);
+
+// 3 vertical
+
+ spar[0]=dpar[0];
+ spar[1]=kSizeSupport1V[1];
+ spar[2]=kSizeSupport1V[2];
+ sparysave=spar[1];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3VD[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvP+dpar[1],kZp+dpar[2]+spar[2]/2.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3VD[1], 0, true,
+ TGeoTranslation(xEnv,yEnvP+dpar[1],kZp+dpar[2]+spar[2]/2.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3VD[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvM+dpar[1],kZm-dpar[2]-spar[2]/2.),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3VD[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvM+dpar[1],kZm-dpar[2]-spar[2]/2.),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ for(Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport3V,volEnvSuppAng3VD[i],iVolNum++,3, spar);
+
+
+// 3 horizontal
+
+ spar[0]=dpar[0];
+ spar[1]=kSizeSupport1H[1];
+ spar[2]=kSizeSupport1H[2];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3HD[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvP+dpar[1]+sparysave,kZp+dpar[2]-spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3HD[1], 0, true,
+ TGeoTranslation(xEnv,yEnvP+dpar[1]+sparysave,kZp+dpar[2]-spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3HD[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvM+dpar[1]+sparysave,kZm-(dpar[2]-spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3HD[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvM+dpar[1]+sparysave,kZm-(dpar[2]-spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ for(Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport3H,volEnvSuppAng3HD[i],iVolNum++,3, spar);
+
+// gas pipe (high)
+ ppar[0]=kSizeGasPipe[0];
+ ppar[1]=kSizeGasPipe[1];
+ ppar[2]=dpar[0];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe2D[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvP+dpar[1]+sparysave+kOffsetGasPipe,kZp),rsupportpipe);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe2D[1], 0, true,
+ TGeoTranslation(xEnv,yEnvP+dpar[1]+sparysave+kOffsetGasPipe,kZp),rsupportpipe);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe2D[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvM+dpar[1]+sparysave+kOffsetGasPipe,kZm),rsupportpipe);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe2D[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvM+dpar[1]+sparysave+kOffsetGasPipe,kZm),rsupportpipe);
+
+ for(Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volInoxGasPipe,volEnvInoxGasPipe2D[i],iVolNum++,3, ppar);
+
+// 4 vertical
+
+ spar[0]=dpar[0];
+ spar[1]=kSizeSupport2V[1];
+ spar[2]=kSizeSupport2V[2];
+ sparysave=spar[1];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4VD[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvP+dpar[1],kSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4VD[1], 0, true,
+ TGeoTranslation(xEnv,yEnvP+dpar[1],kSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4VD[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvM+dpar[1],-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4VD[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvM+dpar[1],-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ for(Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport4V,volEnvSuppAng4VD[i],iVolNum++,3, spar);
+
+// 4 horizontal
+
+ spar[0]=dpar[0];
+ spar[1]=kSizeSupport2H[1];
+ spar[2]=kSizeSupport2H[2];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4HD[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvP+dpar[1]+sparysave,kSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4HD[1], 0, true,
+ TGeoTranslation(xEnv,yEnvP+dpar[1]+sparysave,kSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4HD[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvM+dpar[1]+sparysave,-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4HD[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvM+dpar[1]+sparysave,-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ for(Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport4H,volEnvSuppAng4HD[i],iVolNum++,3, spar);
+
+// X horizontal
+ spar[0]=(kYVSup[3]-kYVSup[0])/2.*zRatio;
+ spar[1]=kSizeSupportXH[1];
+ spar[2]=kSizeSupportXH[2];
+ sparysavex=spar[1];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXHD[0], 0, true,
+ TGeoTranslation(spar[0]+kYVSup[0]*zRatio,-yEnvP+dpar[1]+sparysave+1.0,kSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXHD[1], 0, true,
+ TGeoTranslation(spar[0]+kYVSup[0]*zRatio,yEnvP+dpar[1]+sparysave+1.0,kSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXHD[2], 0, true,
+ TGeoTranslation(-(spar[0]+kYVSup[0]*zRatio),yEnvM+dpar[1]+sparysave+1.0,-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXHD[3], 0, true,
+ TGeoTranslation(-(spar[0]+kYVSup[0]*zRatio),-yEnvM+dpar[1]+sparysave+1.0,-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ for(Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupportXH,volEnvSuppAngXHD[i],iVolNum++,3, spar);
+
+// X vertical
+ spar[0]=(kYVSup[3]-kYVSup[0])/2.*zRatio;
+ spar[1]=kSizeSupportXV[1];
+ spar[2]=kSizeSupportXV[2];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXVD[0], 0, true,
+ TGeoTranslation(spar[0]+kYVSup[0]*zRatio,-yEnvP+dpar[1]+sparysave+1.0+sparysavex+spar[1],kSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXVD[1], 0, true,
+ TGeoTranslation(spar[0]+kYVSup[0]*zRatio,yEnvP+dpar[1]+sparysave+1.0+sparysavex+spar[1],kSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXVD[2], 0, true,
+ TGeoTranslation(-(spar[0]+kYVSup[0]*zRatio),yEnvM+dpar[1]+sparysave+1.0+sparysavex+spar[1],-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXVD[3], 0, true,
+ TGeoTranslation(-(spar[0]+kYVSup[0]*zRatio),-yEnvM+dpar[1]+sparysave+1.0+sparysavex+spar[1],-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ for(Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupportXV,volEnvSuppAngXVD[i],iVolNum++,3, spar);
+
// E
yEnvPsave = yEnvP;
yEnvMsave = yEnvM;
GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv[10],iVolNum++,3,dpar);
GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv[16],iVolNum++,3,dpar);
+// horizontal cable support chamber type E
+
+ spar[0]=dpar[0]-(kYVSup[0]/2.)*zRatio;
+ spar[1]=kSizeSupportCable[1];
+ spar[2]=kSizeSupportCable[2];
+ for(Int_t in=0;in<3;in++){
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSupportHE[in], 0, true, TGeoTranslation(xEnv+kYVSup[0]/2.*zRatio,-(yEnvM+dpar[1]/2.*(in-1)),kSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSupportHE[in+3], 0, true, TGeoTranslation(xEnv+kYVSup[0]/2.*zRatio, yEnvM+dpar[1]/2.*(in-1),kSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSupportHE[in+6], 0, true, TGeoTranslation(-(xEnv+kYVSup[0]/2.*zRatio),-(yEnvP+dpar[1]/2.*(in-1)),-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSupportHE[in+9], 0, true, TGeoTranslation(-(xEnv+kYVSup[0]/2.*zRatio), yEnvP+dpar[1]/2.*(in-1),-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ }
+ for(Int_t ii=0;ii<12;ii++)
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluSupportH,volEnvSupportHE[ii],iVolNum++,3, spar);
+
+// angular supports chamber type E
+// 1 vertical
+
+ spar[0]=dpar[0];
+ spar[1]=kSizeSupport1V[1];
+ spar[2]=kSizeSupport1V[2];
+ sparysave=spar[1];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1VE[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvM-dpar[1],kZm-dpar[2]-spar[2]/2.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1VE[1], 0, true,
+ TGeoTranslation(xEnv,yEnvM-dpar[1],kZm-dpar[2]-spar[2]/2.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1VE[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvP-dpar[1],kZp+dpar[2]+spar[2]/2.),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1VE[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvP-dpar[1],kZp+dpar[2]+spar[2]/2.),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ for(Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport1V,volEnvSuppAng1VE[i],iVolNum++,3, spar);
+
+
+// 1 horizontal
+
+ spar[0]=dpar[0];
+ spar[1]=kSizeSupport1H[1];
+ spar[2]=kSizeSupport1H[2];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1HE[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvM-dpar[1]-sparysave,kZm-(dpar[2]-spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1HE[1], 0, true,
+ TGeoTranslation(xEnv,yEnvM-dpar[1]-sparysave,kZm-(dpar[2]-spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1HE[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvP-dpar[1]-sparysave,kZp+dpar[2]-spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1HE[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvP-dpar[1]-sparysave,kZp+dpar[2]-spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ for(Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport1H,volEnvSuppAng1HE[i],iVolNum++,3, spar);
+
+// gas pipe (low)
+ ppar[0]=kSizeGasPipe[0];
+ ppar[1]=kSizeGasPipe[1];
+ ppar[2]=dpar[0];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe1E[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvM-dpar[1]-sparysave-kOffsetGasPipe,kZm),rsupportpipe);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe1E[1], 0, true,
+ TGeoTranslation(xEnv,yEnvM-dpar[1]-sparysave-kOffsetGasPipe,kZm),rsupportpipe);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe1E[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvP-dpar[1]-sparysave-kOffsetGasPipe,kZp),rsupportpipe);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe1E[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvP-dpar[1]-sparysave-kOffsetGasPipe,kZp),rsupportpipe);
+
+ for(Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volInoxGasPipe,volEnvInoxGasPipe1E[i],iVolNum++,3, ppar);
+
+// 2 vertical
+
+ spar[0]=dpar[0];
+ spar[1]=kSizeSupport2V[1];
+ spar[2]=kSizeSupport2V[2];
+ sparysave=spar[1];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2VE[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvM-dpar[1],-(kSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2VE[1], 0, true,
+ TGeoTranslation(xEnv,yEnvM-dpar[1],-(kSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2VE[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvP-dpar[1],kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2VE[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvP-dpar[1],kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ for(Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport2V,volEnvSuppAng2VE[i],iVolNum++,3, spar);
+
+// 2 horizontal
+
+ spar[0]=dpar[0];
+ spar[1]=kSizeSupport2H[1];
+ spar[2]=kSizeSupport2H[2];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2HE[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvM-dpar[1]-sparysave,-(kSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2HE[1], 0, true,
+ TGeoTranslation(xEnv,yEnvM-dpar[1]-sparysave,-(kSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2HE[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvP-dpar[1]-sparysave,kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2HE[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvP-dpar[1]-sparysave,kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ for(Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport2H,volEnvSuppAng2HE[i],iVolNum++,3, spar);
+
+// 3 vertical
+
+ spar[0]=dpar[0];
+ spar[1]=kSizeSupport1V[1];
+ spar[2]=kSizeSupport1V[2];
+ sparysave=spar[1];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3VE[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvM+dpar[1],kZm-dpar[2]-spar[2]/2.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3VE[1], 0, true,
+ TGeoTranslation(xEnv,yEnvM+dpar[1],kZm-dpar[2]-spar[2]/2.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3VE[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvP+dpar[1],kZp+dpar[2]+spar[2]/2.),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3VE[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvP+dpar[1],kZp+dpar[2]+spar[2]/2.),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ for(Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport3V,volEnvSuppAng3VE[i],iVolNum++,3, spar);
+
+
+// 3 horizontal
+
+ spar[0]=dpar[0];
+ spar[1]=kSizeSupport1H[1];
+ spar[2]=kSizeSupport1H[2];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3HE[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvM+dpar[1]+sparysave,kZm-(dpar[2]-spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3HE[1], 0, true,
+ TGeoTranslation(xEnv,yEnvM+dpar[1]+sparysave,kZm-(dpar[2]-spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3HE[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvP+dpar[1]+sparysave,kZp+dpar[2]-spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3HE[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvP+dpar[1]+sparysave,kZp+dpar[2]-spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ for(Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport3H,volEnvSuppAng3HE[i],iVolNum++,3, spar);
+
+// gas pipe (high)
+ ppar[0]=kSizeGasPipe[0];
+ ppar[1]=kSizeGasPipe[1];
+ ppar[2]=dpar[0];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe2E[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvM+dpar[1]+sparysave+kOffsetGasPipe,kZm),rsupportpipe);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe2E[1], 0, true,
+ TGeoTranslation(xEnv,yEnvM+dpar[1]+sparysave+kOffsetGasPipe,kZm),rsupportpipe);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe2E[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvP+dpar[1]+sparysave+kOffsetGasPipe,kZp),rsupportpipe);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe2E[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvP+dpar[1]+sparysave+kOffsetGasPipe,kZp),rsupportpipe);
+
+ for(Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volInoxGasPipe,volEnvInoxGasPipe2E[i],iVolNum++,3, ppar);
+
+// 4 vertical
+
+ spar[0]=dpar[0];
+ spar[1]=kSizeSupport2V[1];
+ spar[2]=kSizeSupport2V[2];
+ sparysave=spar[1];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4VE[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvM+dpar[1],-(kSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4VE[1], 0, true,
+ TGeoTranslation(xEnv,yEnvM+dpar[1],-(kSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4VE[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvP+dpar[1],kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4VE[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvP+dpar[1],kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ for(Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport4V,volEnvSuppAng4VE[i],iVolNum++,3, spar);
+
+// 4 horizontal
+
+ spar[0]=dpar[0];
+ spar[1]=kSizeSupport2H[1];
+ spar[2]=kSizeSupport2H[2];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4HE[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvM+dpar[1]+sparysave,-(kSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4HE[1], 0, true,
+ TGeoTranslation(xEnv,yEnvM+dpar[1]+sparysave,-(kSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4HE[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvP+dpar[1]+sparysave,kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4HE[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvP+dpar[1]+sparysave,kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ for(Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport4H,volEnvSuppAng4HE[i],iVolNum++,3, spar);
+
+// X horizontal
+ spar[0]=(kYVSup[3]-kYVSup[0])/2.*zRatio;
+ spar[1]=kSizeSupportXH[1];
+ spar[2]=kSizeSupportXH[2];
+ sparysavex=spar[1];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXHE[0], 0, true,
+ TGeoTranslation(spar[0]+kYVSup[0]*zRatio,-yEnvM+dpar[1]+sparysave+1.0,-(kSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXHE[1], 0, true,
+ TGeoTranslation(spar[0]+kYVSup[0]*zRatio,yEnvM+dpar[1]+sparysave+1.0,-(kSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXHE[2], 0, true,
+ TGeoTranslation(-(spar[0]+kYVSup[0]*zRatio),-yEnvP+dpar[1]+sparysave+1.0,kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXHE[3], 0, true,
+ TGeoTranslation(-(spar[0]+kYVSup[0]*zRatio),yEnvP+dpar[1]+sparysave+1.0,kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ for(Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupportXH,volEnvSuppAngXHE[i],iVolNum++,3, spar);
+
+// X vertical
+ spar[0]=(kYVSup[3]-kYVSup[0])/2.*zRatio;
+ spar[1]=kSizeSupportXV[1];
+ spar[2]=kSizeSupportXV[2];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXVE[0], 0, true,
+ TGeoTranslation(spar[0]+kYVSup[0]*zRatio,-yEnvM+dpar[1]+sparysave+1.0+sparysavex+spar[1],-(kSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXVE[1], 0, true,
+ TGeoTranslation(spar[0]+kYVSup[0]*zRatio,yEnvM+dpar[1]+sparysave+1.0+sparysavex+spar[1],-(kSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXVE[2], 0, true,
+ TGeoTranslation(-(spar[0]+kYVSup[0]*zRatio),-yEnvP+dpar[1]+sparysave+1.0+sparysavex+spar[1],kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXVE[3], 0, true,
+ TGeoTranslation(-(spar[0]+kYVSup[0]*zRatio),yEnvP+dpar[1]+sparysave+1.0+sparysavex+spar[1],kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ for(Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupportXV,volEnvSuppAngXVE[i],iVolNum++,3, spar);
// F
yEnvPsave = yEnvP;
GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv[9],iVolNum++,3,dpar);
GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv[17],iVolNum++,3,dpar);
+// horizontal cable support chamber type F
+
+ spar[0]=dpar[0]-(kYVSup[0]/2.)*zRatio;
+ spar[1]=kSizeSupportCable[1];
+ spar[2]=kSizeSupportCable[2];
+ for(Int_t in=0;in<3;in++){
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSupportHF[in], 0, true, TGeoTranslation(xEnv+kYVSup[0]/2.*zRatio,-(yEnvP+dpar[1]/2.*(in-1)),-(kSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSupportHF[in+3], 0, true, TGeoTranslation(xEnv+kYVSup[0]/2.*zRatio,yEnvP+dpar[1]/2.*(in-1),-(kSizeVSupExt[0]+spar[2])));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSupportHF[in+6], 0, true, TGeoTranslation(-(xEnv+kYVSup[0]/2.*zRatio),-(yEnvM+dpar[1]/2.*(in-1)),kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSupportHF[in+9], 0, true, TGeoTranslation(-(xEnv+kYVSup[0]/2.*zRatio), yEnvM+dpar[1]/2.*(in-1),kSizeVSupExt[0]+spar[2]),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ }
+ for(Int_t ii=0;ii<12;ii++)
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluSupportH,volEnvSupportHF[ii],iVolNum++,3, spar);
+
+// angular supports chamber type F
+// 1 vertical
+
+ spar[0]=dpar[0];
+ spar[1]=kSizeSupport1V[1];
+ spar[2]=kSizeSupport1V[2];
+ sparysave=spar[1];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1VF[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvP-dpar[1],kZp+dpar[2]+spar[2]/2.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1VF[1], 0, true,
+ TGeoTranslation(xEnv,yEnvP-dpar[1],kZp+dpar[2]+spar[2]/2.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1VF[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvM-dpar[1],kZm-dpar[2]-spar[2]/2.),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1VF[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvM-dpar[1],kZm-dpar[2]-spar[2]/2.),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ for(Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport1V,volEnvSuppAng1VF[i],iVolNum++,3, spar);
+
+// 1 horizontal
+
+ spar[0]=dpar[0];
+ spar[1]=kSizeSupport1H[1];
+ spar[2]=kSizeSupport1H[2];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1HF[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvP-dpar[1]-sparysave,kZp+dpar[2]-spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1HF[1], 0, true,
+ TGeoTranslation(xEnv,yEnvP-dpar[1]-sparysave,kZp+dpar[2]-spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1HF[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvM-dpar[1]-sparysave,kZm-(dpar[2]-spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng1HF[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvM-dpar[1]-sparysave,kZm-(dpar[2]-spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ for(Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport1H,volEnvSuppAng1HF[i],iVolNum++,3, spar);
+
+// gas pipe (low)
+ ppar[0]=kSizeGasPipe[0];
+ ppar[1]=kSizeGasPipe[1];
+ ppar[2]=dpar[0];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe1F[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvP-dpar[1]-sparysave-kOffsetGasPipe,kZp),rsupportpipe);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe1F[1], 0, true,
+ TGeoTranslation(xEnv,yEnvP-dpar[1]-sparysave-kOffsetGasPipe,kZp),rsupportpipe);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe1F[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvM-dpar[1]-sparysave-kOffsetGasPipe,kZm),rsupportpipe);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe1F[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvM-dpar[1]-sparysave-kOffsetGasPipe,kZm),rsupportpipe);
+
+ for(Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volInoxGasPipe,volEnvInoxGasPipe1F[i],iVolNum++,3, ppar);
+
+// 2 vertical
+
+ spar[0]=dpar[0];
+ spar[1]=kSizeSupport2V[1];
+ spar[2]=kSizeSupport2V[2];
+ sparysave=spar[1];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2VF[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvP-dpar[1],kSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2VF[1], 0, true,
+ TGeoTranslation(xEnv,yEnvP-dpar[1],kSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2VF[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvM-dpar[1],-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2VF[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvM-dpar[1],-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ for(Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport2V,volEnvSuppAng2VF[i],iVolNum++,3, spar);
+
+// 2 horizontal
+
+ spar[0]=dpar[0];
+ spar[1]=kSizeSupport2H[1];
+ spar[2]=kSizeSupport2H[2];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2HF[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvP-dpar[1]-sparysave,kSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2HF[1], 0, true,
+ TGeoTranslation(xEnv,yEnvP-dpar[1]-sparysave,kSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2HF[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvM-dpar[1]-sparysave,-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng2HF[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvM-dpar[1]-sparysave,-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ for(Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport2H,volEnvSuppAng2HF[i],iVolNum++,3, spar);
+
+// 3 vertical
+
+ spar[0]=dpar[0];
+ spar[1]=kSizeSupport1V[1];
+ spar[2]=kSizeSupport1V[2];
+ sparysave=spar[1];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3VF[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvP+dpar[1],kZp+dpar[2]+spar[2]/2.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3VF[1], 0, true,
+ TGeoTranslation(xEnv,yEnvP+dpar[1],kZp+dpar[2]+spar[2]/2.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3VF[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvM+dpar[1],kZm-dpar[2]-spar[2]/2.),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3VF[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvM+dpar[1],kZm-dpar[2]-spar[2]/2.),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ for(Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport3V,volEnvSuppAng3VF[i],iVolNum++,3, spar);
+
+// 3 horizontal
+
+ spar[0]=dpar[0];
+ spar[1]=kSizeSupport1H[1];
+ spar[2]=kSizeSupport1H[2];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3HF[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvP+dpar[1]+sparysave,kZp+dpar[2]-spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3HF[1], 0, true,
+ TGeoTranslation(xEnv,yEnvP+dpar[1]+sparysave,kZp+dpar[2]-spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3HF[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvM+dpar[1]+sparysave,kZm-(dpar[2]-spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng3HF[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvM+dpar[1]+sparysave,kZm-(dpar[2]-spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ for(Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport3H,volEnvSuppAng3HF[i],iVolNum++,3, spar);
+
+// gas pipe (high)
+ ppar[0]=kSizeGasPipe[0];
+ ppar[1]=kSizeGasPipe[1];
+ ppar[2]=dpar[0];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe2F[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvP+dpar[1]+sparysave+kOffsetGasPipe,kZp),rsupportpipe);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe2F[1], 0, true,
+ TGeoTranslation(xEnv,yEnvP+dpar[1]+sparysave+kOffsetGasPipe,kZp),rsupportpipe);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe2F[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvM+dpar[1]+sparysave+kOffsetGasPipe,kZm),rsupportpipe);
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvInoxGasPipe2F[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvM+dpar[1]+sparysave+kOffsetGasPipe,kZm),rsupportpipe);
+
+ for(Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volInoxGasPipe,volEnvInoxGasPipe2F[i],iVolNum++,3, ppar);
+
+// 4 vertical
+
+ spar[0]=dpar[0];
+ spar[1]=kSizeSupport2V[1];
+ spar[2]=kSizeSupport2V[2];
+ sparysave=spar[1];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4VF[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvP+dpar[1],kSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4VF[1], 0, true,
+ TGeoTranslation(xEnv,yEnvP+dpar[1],kSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4VF[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvM+dpar[1],-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4VF[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvM+dpar[1],-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ for(Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport4V,volEnvSuppAng4VF[i],iVolNum++,3, spar);
+
+// 4 horizontal
+
+ spar[0]=dpar[0];
+ spar[1]=kSizeSupport2H[1];
+ spar[2]=kSizeSupport2H[2];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4HF[0], 0, true,
+ TGeoTranslation(xEnv,-yEnvP+dpar[1]+sparysave,kSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4HF[1], 0, true,
+ TGeoTranslation(xEnv,yEnvP+dpar[1]+sparysave,kSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4HF[2], 0, true,
+ TGeoTranslation(-xEnv,-yEnvM+dpar[1]+sparysave,-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAng4HF[3], 0, true,
+ TGeoTranslation(-xEnv,yEnvM+dpar[1]+sparysave,-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ for(Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupport4H,volEnvSuppAng4HF[i],iVolNum++,3, spar);
+
+
+// X horizontal
+ spar[0]=(kYVSup[3]-kYVSup[0])/2.*zRatio;
+ spar[1]=kSizeSupportXH[1];
+ spar[2]=kSizeSupportXH[2];
+ sparysavex=spar[1];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXHF[0], 0, true,
+ TGeoTranslation(spar[0]+kYVSup[0]*zRatio,-yEnvP+dpar[1]+sparysave+1.0,kSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXHF[1], 0, true,
+ TGeoTranslation(spar[0]+kYVSup[0]*zRatio,yEnvP+dpar[1]+sparysave+1.0,kSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXHF[2], 0, true,
+ TGeoTranslation(-(spar[0]+kYVSup[0]*zRatio),-yEnvM+dpar[1]+sparysave+1.0,-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXHF[3], 0, true,
+ TGeoTranslation(-(spar[0]+kYVSup[0]*zRatio),yEnvM+dpar[1]+sparysave+1.0,-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ for(Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupportXH,volEnvSuppAngXHF[i],iVolNum++,3, spar);
+
+// X vertical
+ spar[0]=(kYVSup[3]-kYVSup[0])/2.*zRatio;
+ spar[1]=kSizeSupportXV[1];
+ spar[2]=kSizeSupportXV[2];
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXVF[0], 0, true,
+ TGeoTranslation(spar[0]+kYVSup[0]*zRatio,-yEnvP+dpar[1]+sparysave+1.0+sparysavex+spar[1],kSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXVF[1], 0, true,
+ TGeoTranslation(spar[0]+kYVSup[0]*zRatio,yEnvP+dpar[1]+sparysave+1.0+sparysavex+spar[1],kSizeVSupExt[0]+spar[2]));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXVF[2], 0, true,
+ TGeoTranslation(-(spar[0]+kYVSup[0]*zRatio),-yEnvM+dpar[1]+sparysave+1.0+sparysavex+spar[1],-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+ GetEnvelopes(16+icount)->AddEnvelope(volEnvSuppAngXVF[3], 0, true,
+ TGeoTranslation(-(spar[0]+kYVSup[0]*zRatio),yEnvM+dpar[1]+sparysave+1.0+sparysavex+spar[1],-(kSizeVSupExt[0]+spar[2])),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.));
+
+ for(Int_t i=0;i<4;i++)
+ GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAluAngSupportXV,volEnvSuppAngXVF[i],iVolNum++,3, spar);
+
} // end loop on detection planes
} // end loop on stations
}
//______________________________________________________________________________
void AliMUONTriggerGeometryBuilder::SetTransformations()
{
-// Defines the transformations for the trigger chambers.
-// ---
+/// Defines the transformations for the trigger chambers.
if (gAlice->GetModule("SHIL")) {
SetMotherVolume(16, "YOUT2");
//______________________________________________________________________________
void AliMUONTriggerGeometryBuilder::SetSensitiveVolumes()
{
-// Defines the sensitive volumes for trigger station chambers.
-// ---
+/// Defines the sensitive volumes for trigger station chambers.
GetGeometry(16)->SetSensitiveVolume("S11G");
GetGeometry(17)->SetSensitiveVolume("S12G");
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff