-enum gentype_t {hijing, gun, box, pythia, param, cocktail, fluka, halo, ntuple, scan, doublescan, hijing_g};
-
-gentype_t gentype=param;
-Int_t ntracks=1;
-
-void Config()
-
+/**************************************************************************
+ * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
+ * *
+ * Author: The ALICE Off-line Project. *
+ * Contributors are mentioned in the code where appropriate. *
+ * *
+ * Permission to use, copy, modify and distribute this software and its *
+ * documentation strictly for non-commercial purposes is hereby granted *
+ * without fee, provided that the above copyright notice appears in all *
+ * copies and that both the copyright notice and this permission notice *
+ * appear in the supporting documentation. The authors make no claims *
+ * about the suitability of this software for any purpose. It is *
+ * provided "as is" without express or implied warranty. *
+ **************************************************************************/
+
+/* $Id$ */
+
+/// \ingroup macros
+/// \file Config.C
+/// \brief Configuration macro for MUON spectormeter simulation
+///
+/// Remember to define the directory and event generator option:
+///
+/// gAlice->SetConfigFunction("Config('$HOME','box');");
+///
+/// Can be compiled by :
+/// .L Config.C+
+/// (depends on the correct rootlogon.C though...)
+
+#if !defined(__CINT__) || defined(__MAKECINT__)
+
+#include "AliABSOv3.h"
+#include "AliBODY.h"
+#include "AliConfig.h"
+#include "AliDIPOv3.h"
+#include "AliDecayerPythia.h"
+#include "AliFRAMEv2.h"
+#include "AliGenBox.h"
+#include "AliGenFixed.h"
+#include "AliGenHijing.h"
+#include "AliGenMUONCocktail.h"
+#include "AliGenMUONlib.h"
+#include "AliGenParam.h"
+#include "AliGenScan.h"
+#include "AliHALLv3.h"
+#include "AliITSv11.h"
+#include "AliMAG.h"
+#include "AliMagF.h"
+#include "AliMUONv1.h"
+#include "AliPIPEv3.h"
+#include "AliRun.h"
+#include "AliRunLoader.h"
+#include "AliSHILv3.h"
+#include <Riostream.h>
+#include <TDatime.h>
+#include <TGeant3TGeo.h>
+#include <TGeoGlobalMagField.h>
+#include <TPDGCode.h>
+#include <TRandom.h>
+#include <TSystem.h>
+#include <TVirtualMC.h>
+
+//#include "AliZDCv3.h"
+//#include "AliFMDv1.h"
+//#include "AliPMDv1.h"
+//#include "AliVZEROv7.h"
+
+#endif
+
+void Config(const char* directory="",
+ const char* option="param",
+ const char* digitstore="AliMUONDigitStoreV2S",
+ bool forEmbedding=kFALSE,
+ bool forRealistic=kFALSE)
{
- gSystem->Load("libgeant321");
- new TGeant3("C++ Interface to Geant3");
-
-
-
-//=======================================================================
-// Create the output file
-
- TFile *rootfile = new TFile("galice.root","recreate");
- rootfile->SetCompressionLevel(2);
- AliDecayer* decayer = new AliDecayerPythia();
- decayer->SetForceDecay(kAll);
- decayer->Init();
- gMC->SetExternalDecayer(decayer);
-
- TGeant3 *geant3 = (TGeant3*)gMC;
-//=======================================================================
-// ******* GEANT STEERING parameters FOR ALICE SIMULATION *******
-geant3->SetTRIG(1); //Number of events to be processed
-geant3->SetSWIT(4,100);
-geant3->SetDEBU(0,0,1);
-geant3->SetDCAY(1);
-geant3->SetPAIR(1);
-geant3->SetCOMP(1);
-geant3->SetPHOT(1);
-geant3->SetPFIS(0);
-geant3->SetDRAY(0);
-geant3->SetANNI(1);
-geant3->SetBREM(1);
-geant3->SetMUNU(1);
-geant3->SetCKOV(0);
-geant3->SetHADR(4); //Select pure GEANH (HADR 1) or GEANH/NUCRIN (HADR 3)
-geant3->SetLOSS(1);
-geant3->SetMULS(1);
-geant3->SetRAYL(0);
-geant3->SetAUTO(1); //Select automatic STMIN etc... calc. (AUTO 1) or manual (AUTO 0)
-geant3->SetABAN(1); //Restore 3.16 behaviour for abandoned tracks
-geant3->SetOPTI(2); //Select optimisation level for GEANT geometry searches (0,1,2)
-Float_t cut = 1.e-4; // 100MeV cut by default
-Float_t tofmax = 1.e10;
-// GAM ELEC NHAD CHAD MUON EBREM MUHAB EDEL MUDEL MUPA TOFMAX
-geant3->SetCUTS(1.e-4, 1.e-4, 1.e-3, 1.e-4, 1.e-3, cut, cut, cut, cut, cut, 1.e-5);
-
-gAlice->TrackingLimits(700, 2000);
-
-//
-//=======================================================================
-// ************* STEERING parameters FOR ALICE SIMULATION **************
-// --- Specify event type to be tracked through the ALICE setup
-// --- All positions are in cm, angles in degrees, and P and E in GeV
-
- switch(gentype)
- {
- case gun:
-//*********************************************
-// Example for Fixed Particle Gun *
-//*********************************************
- AliGenFixed *gener = new AliGenFixed(ntracks);
- gener->SetMomentum(10);
- gener->SetPhiRange(0);
- gener->SetThetaRange(0.);
- gener->SetOrigin(30,30,1200); //vertex position
- gener->SetPart(kProton); //GEANT particle type
- break;
- case box:
-//*********************************************
-// Example for Moving Particle Gun *
-//*********************************************
- AliGenBox *gener = new AliGenBox(ntracks);
- gener->SetMomentumRange(33,34);
- gener->SetPhiRange(-180,180);
- gener->SetThetaRange(2., 9.);
- gener->SetOrigin(0,0,0);
- gener->SetVertexSmear(kPerTrack);
- //vertex position
- gener->SetSigma(0, 0, 0); // Sigma in (X,Y,Z) (cm) on IP position
- gener->SetPart(kMuonPlus); // GEANT particle type
- break;
- case scan:
-//*********************************************
-// Scanning on a grid *
-//*********************************************
- AliGenScan *gener = new AliGenScan(-1);
- gener->SetMomentumRange(20,20);
- gener->SetPhiRange(90,90);
- gener->SetThetaRange(0,0);
- //vertex position
- gener->SetSigma(1,1,0); //Sigma in (X,Y,Z) (cm) on IP position
- gener->SetPart(kMuonMinus);
- gener->SetRange(100, -300., 300., 100, -300., 300., 1, 900, 900);
- break;
- case doublescan:
-//*********************************************
-// Scanning on a grid *
-//*********************************************
- AliGenDoubleScan *gener = new AliGenDoubleScan(-1);
- gener->SetMomentumRange(4,4);
- gener->SetPhiRange(0,360);
- gener->SetThetaRange(0,0);
- //vertex position
- gener->SetSigma(3,3,0); //Sigma in (X,Y,Z) (cm) on IP position
- gener->SetPart(8);
- gener->SetRange(20, -100, 100, 20, -100, 100, 1, 500, 500);
- gener->SetDistance(1);
- break;
-
- case hijing:
- AliGenHIJINGpara *gener = new AliGenHIJINGpara(ntracks);
- gener->SetMomentumRange(0,999);
- gener->SetPtRange(0,999);
- gener->SetPhiRange(0,360);
-// gener->SetThetaRange(0.104,33.52);
- gener->SetThetaRange(0.104,90.0);
-// gener->SetThetaRange(2.,9.);
- gener->SetOrigin(0., 0.0 ,0); // vertex position
- gener->SetSigma(0,0,5.3); // Sigma in (X,Y,Z) (cm) on IP position
- gener->SetVertexSmear(kPerTrack);
- gener->SetTrackingFlag(0);
- break;
- case hijing_g:
- AliGenHijing *gener = new AliGenHijing(-1);
-
- gener->SetEnergyCMS(5600.);
- gener->SetReferenceFrame("CMS");
- gener->SetProjectile("A", 208, 82);
- gener->SetTarget ("A", 208, 82);
- gener->SetImpactParameterRange(0, 5.);
- gener->SetEvaluate(0);
- gener->KeepFullEvent();
- gener->SetJetQuenching(1);
- gener->SetShadowing(1);
- gener->SetDecaysOff(1);
- gener->SetTrigger(0);
- gener->SetSelectAll(1);
- gener->SetMomentumRange(0,9999);
- gener->SetPhiRange(-180,180);
- gener->SetThetaRange(0.104,90.0);
-// gener->SetFlavor(4);
- gener->SetOrigin(0., 0.0 ,0);
- gener->SetSigma(0,0,5.3);
- gener->SetVertexSmear(kPerEvent);
- gener->SetTrackingFlag(0);
-
- break;
-
- case pythia:
-//********************************************
-// Example for Charm Production with Pythia *
-//********************************************
-AliGenPythia *gener = new AliGenPythia(ntracks);
- gener->SetMomentumRange(0,999);
- gener->SetPhiRange(0,360);
- gener->SetThetaRange(0., 180.);
- gener->SetYRange(-10,10);
- gener->SetPtRange(0,100);
- //gener->SetOrigin(0,0,0); // vertex position
- //gener->SetVertexSmear(kPerEvent);
- //gener->SetSigma(0,0,5.6); // Sigma in (X,Y,Z) (cm) on IP position
- gener->SetStrucFunc(kDOSet1);
- gener->SetProcess(kPyCharm);
- gener->SetEnergyCMS(5500.);
- break;
-/*
- AliGenPythia *gener = new AliGenPythia(ntracks);
- gener->SetMomentumRange(0,999);
- gener->SetPhiRange(0,360);
- gener->SetThetaRange(0., 180.);
- gener->SetYRange(-10,10);
- gener->SetPtRange(0,100);
- gener->SetOrigin(0,0,0); // vertex position
- gener->SetVertexSmear(kPerEvent);
- gener->SetSigma(0,0,5.6); // Sigma in (X,Y,Z) (cm) on IP position
- gener->SetStrucFunc(DO_Set_1);
- gener->SetProcess(charm);
- gener->SetForceDecay(dimuon);
- gener->SetEnergyCMS(5500.);
- gener->SetTrackingFlag(0);
-
- break;
- */
- case param:
-//*******************************************************
-// Example for J/psi or Upsilon Production from Parameterisation *
-//*******************************************************
- AliGenParam *gener = new AliGenParam(ntracks, AliGenMUONlib::kUpsilon);
- gener->SetMomentumRange(0,999);
- gener->SetPtRange(0,100.);
- gener->SetPhiRange(-180, 180);
- gener->SetYRange(2.5,4);
- gener->SetCutOnChild(1);
- gener->SetChildThetaRange(2.0,9);
- gener->SetOrigin(0,0,0); //vertex position
- gener->SetSigma(0,0,0); //Sigma in (X,Y,Z) (cm) on IP position
- gener->SetForceDecay(kDiMuon);
- gener->SetTrackingFlag(1);
-
- break;
-
- case fluka:
-//*******************************************************
-// Example for a FLUKA Boundary Source *
-//*******************************************************
- AliGenFLUKAsource *gener = new AliGenFLUKAsource(-1);
- gener->AddFile("$(ALICE_ROOT)/data/alice.root");
- rootfile->cd();
- gener->SetPartFlag(7);
- gener->SetMomentumRange(0,999);
- gener->SetPhiRange(0,360);
- gener->SetThetaRange(0., 180.);
- gener->SetAgeMax(1.e-5);
-
-// 31.7 events
- gener->SetFraction(1.);
- break;
-
- case ntuple:
-//*******************************************************
-// Example for reading from a external file *
-//*******************************************************
- AliGenExtFileCH *gener = new AliGenExtFileCH(-1);
- gener->SetFileName("$(ALICE_ROOT)/data/pbpb.root");
- gener->SetThetaRange(0.104,90.);
- gener->SetOrigin(0,0,0); //vertex position
- gener->SetSigma(0,0,5.6); //Sigma in (X,Y,Z) (cm) on IP position
- gener->SetVertexSmear(kPerTrack);
- gener->SetTrackingFlag(1);
- break;
-
- case halo:
-//*******************************************************
-// Example for Tunnel Halo Source *
-//*******************************************************
- AliGenHalo *gener = new AliGenHalo(ntracks);
- gener->SetFileName("/h1/morsch/marsip/marsip5.mu");
- break;
-
- case cocktail:
-//*******************************************************
-// Example for a Cocktail *
-//*******************************************************
- AliGenCocktail *gener = new AliGenCocktail();
- gener->SetMomentumRange(0,10);
- gener->SetPhiRange(0,360);
- gener->SetThetaRange(2.,9.);
- gener->SetTrackingFlag(0);
- AliGenParam *Pi0 = new AliGenParam(100, new AliGenPMDlib(), AliGenPMDlib::kPion);
- AliGenParam *Eta = new AliGenParam( 10, new AliGenPMDlib(), AliGenPMDlib::kEta);
- gener->AddGenerator(Pi0, "neutral pions" , 1.);
- gener->AddGenerator(Eta, "neutral etas" , 1.);
- break;
- }
-
-
-gener->Init();
-gAlice->SetField(2,1); //Specify maximum magnetic field in Tesla (neg. ==> default field)
-
-Int_t iFRAME =0;
-Int_t iMAG =0;
-Int_t iITS =0;
-Int_t iABSO =1;
-Int_t iDIPO =0;
-Int_t iHALL =0;
-Int_t iSHIL =1;
-Int_t iPIPE =1;
-Int_t iFMD =0;
-Int_t iMUON =1;
-
-//=================== Alice BODY parameters =============================
-AliBODY *BODY = new AliBODY("BODY","Alice envelop");
-
-if(iFRAME) {
-//=================== FRAME parameters ============================
-AliFRAME *FRAME = new AliFRAMEv0("FRAME","Space Frame");
-}
-
-if(iMAG) {
-//=================== MAG parameters ============================
-// --- Start with Magnet since detector layouts may be depending ---
-// --- on the selected Magnet dimensions ---
-AliMAG *MAG = new AliMAG("MAG","Magnet");
-}
-
-if(iABSO) {
-//=================== ABSO parameters ============================
- AliABSO *ABSO = new AliABSOv0("ABSO","Muon Absorber");
-}
-
-if(iDIPO) {
-//=================== DIPO parameters ============================
-
- AliDIPO *DIPO = new AliDIPOv2("DIPO","Dipole version 2");
-}
-
-if(iHALL) {
-//=================== HALL parameters ============================
- AliHALL *HALL = new AliHALL("HALL","Alice Hall");
-}
-
-
-
-if(iSHIL) {
-//=================== SHIL parameters ============================
-// AliSHIL *SHIL = new AliSAROV("SHIL","Shielding");
- AliSHILvF *SHIL = new AliSHILvF("SHIL","Shielding");
- SHIL->SetPbCone(1);
-// AliSAROV *SHIL = new AliSAROV("SHIL","Shielding");
-}
-
-
-if(iPIPE) {
-//=================== PIPE parameters ============================
- AliPIPE *PIPE = new AliPIPEv0("PIPE","Beam Pipe");
-}
-
-
-if(iFMD) {
-//=================== FMD parameters ============================
- AliFMD *FMD = new AliFMDv1("FMD","normal FMD");
-}
-
-if(iMUON) {
-//=================== MUON parameters ===========================
-
- AliMUON *MUON = new AliMUONv1("MUON","default");
+ //=====================================================================
+ // Config file for MUON test
+ //=====================================================================
+ // Libraries required by geant321
+
+ gSystem->Load("liblhapdf.so"); // Parton density functions
+ gSystem->Load("libpythia6.so"); // Pythia
+ gSystem->Load("libgeant321.so");
+ gSystem->Load("libEG");
+ gSystem->Load("libEGPythia6");
+ gSystem->Load("libAliPythia6.so"); // ALICE specific implementations
+
+ new TGeant3TGeo("C++ Interface to Geant3");
+
+ //=======================================================================
+ // Create the output file
+ Text_t filename[100];
+ sprintf(filename,"%sgalice.root",directory);
+ cout << ">>> Output file is " << filename << endl;
+ cout << ">>> Config.C: Creating Run Loader ..."<<endl;
+ AliRunLoader* rl=0x0;
+ rl = AliRunLoader::Open(
+ filename, AliConfig::GetDefaultEventFolderName(), "recreate");
+ if (rl == 0x0)
+ { gAlice->Fatal("Config.C","Can not instatiate the Run Loader");
+ return; }
+ rl->SetCompressionLevel(2);
+ rl->SetNumberOfEventsPerFile(10000);
+ gAlice->SetRunLoader(rl);
+ //=======================================================================
+ // For having more debuging messages
+ //AliLog::SetModuleDebugLevel("MUON", 1);
+ //=======================================================================
+ // Set External decayer
+ TVirtualMCDecayer *decayer = new AliDecayerPythia();
+ decayer->SetForceDecay(kAll);
+ decayer->Init();
+ gMC->SetExternalDecayer(decayer);
+ //=======================================================================
+ // ******* GEANT STEERING parameters FOR ALICE SIMULATION *******
+ gMC->SetProcess("DCAY",1);
+ gMC->SetProcess("PAIR",1);
+ gMC->SetProcess("COMP",1);
+ gMC->SetProcess("PHOT",1);
+ gMC->SetProcess("PFIS",0);
+ gMC->SetProcess("DRAY",0);
+ gMC->SetProcess("ANNI",1);
+ gMC->SetProcess("BREM",1);
+ gMC->SetProcess("MUNU",1);
+ gMC->SetProcess("CKOV",1);
+ gMC->SetProcess("HADR",1);
+ gMC->SetProcess("LOSS",2);
+ gMC->SetProcess("MULS",1);
+ gMC->SetProcess("RAYL",1);
+ Float_t cut = 1.e-3; // 1MeV cut by default
+ Float_t tofmax = 1.e10;
+ gMC->SetCut("CUTGAM", cut);
+ gMC->SetCut("CUTELE", cut);
+ gMC->SetCut("CUTNEU", cut);
+ gMC->SetCut("CUTHAD", cut);
+ gMC->SetCut("CUTMUO", cut);
+ gMC->SetCut("BCUTE", cut);
+ gMC->SetCut("BCUTM", cut);
+ gMC->SetCut("DCUTE", cut);
+ gMC->SetCut("DCUTM", cut);
+ gMC->SetCut("PPCUTM", cut);
+ gMC->SetCut("TOFMAX", tofmax);
+ //=======================================================================
+ // Examples of generators. Only option param is sistematically tested
+ if (!strcmp(option,"box")) {
+ AliGenBox * gener = new AliGenBox(1);
+ gener->SetMomentumRange(20.,20.1);
+ gener->SetPhiRange(0., 360.);
+ gener->SetThetaRange(171.000,178.001);
+ gener->SetPart(kMuonMinus); // Muons
+ gener->SetOrigin(0.,0., 0.); //vertex position
+ gener->SetSigma(0.0, 0.0, 0.0); //Sigma in (X,Y,Z) (cm) on IP position
+ }
+ if (!strcmp(option,"gun")) {
+ AliGenFixed *gener = new AliGenFixed(1);
+ gener->SetMomentum(10);
+ gener->SetPhiRange(0.);
+ gener->SetThetaRange(0.);
+ gener->SetOrigin(30,30,-1200);//vertex position
+ gener->SetPart(kMuonMinus); //GEANT particle type 13 is muons
+ }
+ if (!strcmp(option,"scan")) {
+ AliGenScan *gener = new AliGenScan(-1);
+ gener->SetMomentumRange(10,10);
+ gener->SetPhiRange(0, 0);
+ gener->SetThetaRange(-180, -180);
+ //vertex position
+ //gener->SetSigma(1,1,0); //Sigma in (X,Y,Z) (cm) on IP position
+ gener->SetPart(kRootino);
+ gener->SetRange(100, -300., 300., 100, -300., 300., 1, 2000, 2000);
+ }
+ if (!strcmp(option,"param")) {
+ AliGenParam *gener = new AliGenParam(1, AliGenMUONlib::kUpsilon);
+ gener->SetMomentumRange(0,999);
+ gener->SetPtRange(0,100.);
+ gener->SetPhiRange(0., 360.);
+ gener->SetCutOnChild(1);
+ gener->SetChildPhiRange(0.,360.);
+ gener->SetChildThetaRange(171.0,178.0);
+ gener->SetOrigin(0,0,0); //vertex position gener->SetSigma(0,0,0); //Sigma in (X,Y,Z) (cm) on IP position
+ if (forRealistic)
+ {
+ gener->SetVertexSmear(kPerEvent);
+ }
+ gener->SetForceDecay(kDiMuon);
+ gener->SetTrackingFlag(1);
+ gener->Init();
+ }
+ if (!strcmp(option,"paramJpsi")) {
+ AliGenParam *gener = new AliGenParam(1, AliGenMUONlib::kJpsi);
+ gener->SetMomentumRange(0,999);
+ gener->SetPtRange(0,100.);
+ gener->SetPhiRange(0., 360.);
+ gener->SetCutOnChild(1);
+ gener->SetChildPhiRange(0.,360.);
+ gener->SetChildThetaRange(171.0,178.0);
+ gener->SetOrigin(0,0,0);
+ gener->SetForceDecay(kDiMuon);
+ gener->SetTrackingFlag(1);
+ gener->Init();
+ }
+ if (!strcmp(option,"hijing")) { //Hijing generator from ConfigPPR in macros
+ AliGenHijing *gener = new AliGenHijing(-1);
+ // centre of mass energy
+ gener->SetEnergyCMS(5500.);
+ // reference frame
+ gener->SetReferenceFrame("CMS");
+ // projectile
+ gener->SetProjectile("A", 208, 82);
+ gener->SetTarget ("A", 208, 82);
+ // tell hijing to keep the full parent child chain
+ gener->KeepFullEvent();
+ // enable jet quenching
+ gener->SetJetQuenching(1);
+ // enable shadowing
+ gener->SetShadowing(1);
+ // neutral pion and heavy particle decays switched off
+ gener->SetDecaysOff(1);
+ // Don't track spectators
+ gener->SetSpectators(0);
+ // kinematic selection
+ gener->SetSelectAll(0);
+ // impact parameter range
+ gener->SetImpactParameterRange(0., 5.); // 0. - 5. fm corresponds to ~10% most central
+ gener->Init();
+ }
+ if (!strcmp(option,"muoncocktail")) { // Muon cocktail for PbPb
+ AliGenMUONCocktail * gener = new AliGenMUONCocktail();
+ gener->SetPtRange(1.,100.); // Transverse momentum range
+ gener->SetPhiRange(0.,360.); // Azimuthal angle range
+ gener->SetYRange(-4.0,-2.5);
+ gener->SetMuonPtCut(0.5);
+ gener->SetMuonThetaCut(171.,178.);
+ gener->SetMuonMultiplicity(2);
+ gener->SetImpactParameterRange(0.,5.); // 10% most centra PbPb collisions
+ gener->SetVertexSmear(kPerTrack);
+ gener->SetOrigin(0,0,0); // Vertex position
+ gener->SetSigma(0,0,0.0); // Sigma in (X,Y,Z) (cm) on IP position
+ gener->Init();
+ }
+ //=============================================================
+ // Field (L3 0.5 T)
+ TGeoGlobalMagField::Instance()->SetField(new AliMagF("Maps","Maps", -1., -1, AliMagF::k5kG));
+ //=============================================================
+ //=================== Alice BODY parameters =============================
+ new AliBODY("BODY","Alice envelop");
+ //=================== ABSO parameters ============================
+ new AliABSOv3("ABSO", "Muon Absorber");
+ //=================== DIPO parameters ============================
+ new AliDIPOv3("DIPO", "Dipole version 2");
+ //================== HALL parameters ============================
+ new AliHALLv3("HALL", "Alice Hall");
+ //=================== PIPE parameters ============================
+ new AliPIPEv3("PIPE", "Beam Pipe");
+ //=================== SHIL parameters ============================
+ new AliSHILv3("SHIL", "Shielding Version 2");
+
+ //=================== MUON Subsystem ===========================
+ AliMUON *MUON = new AliMUONv1("MUON", "default");
+
+ // The 3 switches below are to be used for the trigger code
+ // their default value is set in AliMUON.h
+ // activate trigger cluster-size (0=default, 1=cluster-size according to AliMUONResponseTriggerV1
+ // MUON->SetTriggerResponseV1(0);
+ // activate 4/4 trigger coincidence (0=default (coinc 3/4), 1=coinc 4/4)
+ // MUON->SetTriggerCoinc44(0);
+ // activate trigger chamber efficiency by cells (0=default, 1=trigger efficiency according to AliMUONTriggerEfficiencyCells
+ // MUON->SetTriggerEffCells(0);
+
+ // Activate the following line when running with Fluka
+ // MUON->SetIsMaxStep(kFALSE);
+
+ // Use SetDigitStoreClassName() to change the digitStore implementation used by (s)digitizer
+ MUON->SetDigitStoreClassName(digitstore);
+
+ if ( forEmbedding )
+ {
+ // Noise-only digits in tracker/trigger (0=no noise, 1=default (noise in tracker), 2=noise in tracker and trigger):
+ cout << "****** DISABLING NOISE GENERATION AS WE DO EMBEDDING ******" << endl;
+ MUON->SetDigitizerWithNoise(0);
+ MUON->SetConvertTrigger(true);
+ new AliITSv11("ITS","ITS v11");
+ }
+ else if (forRealistic)
+ {
+ new AliITSv11("ITS","ITS v11");
+ }
+
+ // Use non-high performance raw data decoder
+ //MUON->SetFastTrackerDecoder(kFALSE);
+ //MUON->SetFastTriggerDecoder(kFALSE);
+
+ //
+ // If SetAlign, the detection elements transformations
+ // are taken from the input file and not from the code
+ // MUON->SetAlign("transform.dat");
+
+ // To generate and read scaler trigger events in rawdata
+ // MUON->SetTriggerScalerEvent();
+
+ // To switch off the tail effect
+ // MUON->SetTailEffect(kFALSE);
+
+ // If you want to play with builders, first reset the geometry builder,
+ // and then add yours.
+ // MUON->ResetGeometryBuilder();
+ // MUON->AddGeometryBuilder(new AliMUONSt1GeometryBuilderV2(MUON));
+ // MUON->AddGeometryBuilder(new AliMUONSt2GeometryBuilderV2(MUON));
+ // MUON->AddGeometryBuilder(new AliMUONSlatGeometryBuilder(MUON));
+ // MUON->AddGeometryBuilder(new AliMUONTriggerGeometryBuilder(MUON));
}
-
-}
-
-
-
-
-
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff