-enum gentype_t {hijing, gun, box, pythia, param, cocktail, fluka, halo, ntuple, scan, doublescan};
+// Config file test for MUON spectormeter
+// Remember to define the directory and option
+// gAlice->SetConfigFunction("Config('$HOME','box');");
-gentype_t gentype=param;
-//Int_t ntracks=2828*20;
-Int_t ntracks=200;
-void Config()
+void Config(char directory[100]="", char option[6]="param")
{
-
-new AliGeant3("C++ Interface to Geant3");
-
-//=======================================================================
-// Create the output file
-
-TFile *rootfile = new TFile("galice.root","recreate");
-rootfile->SetCompressionLevel(2);
-TGeant3 *geant3 = (TGeant3*)gMC;
-
-
-//=======================================================================
-// ******* GEANT STEERING parameters FOR ALICE SIMULATION *******
- geant3->fGctrak->maxnst=1000000;
-
-geant3->SetTRIG(1); //Number of events to be processed
-geant3->SetSWIT(4,100);
-geant3->SetDEBU(0,0,1);
-geant3->SetDCAY(1);
-geant3->SetPAIR(1);
-geant3->SetCOMP(1);
-geant3->SetPHOT(1);
-geant3->SetPFIS(0);
-geant3->SetDRAY(1);
-geant3->SetANNI(1);
-geant3->SetBREM(1);
-geant3->SetMUNU(1);
-geant3->SetCKOV(0);
-geant3->SetHADR(4); //Select pure GEANH (HADR 1) or GEANH/NUCRIN (HADR 3)
-geant3->SetLOSS(1);
-geant3->SetMULS(1);
-geant3->SetRAYL(0);
-geant3->SetAUTO(0); //Select automatic STMIN etc... calc. (AUTO 1) or manual (AUTO 0)
-geant3->SetABAN(0); //Restore 3.16 behaviour for abandoned tracks
-geant3->SetOPTI(2); //Select optimisation level for GEANT geometry searches (0,1,2)
-Float_t cut = 1.e-1; // 100MeV cut by default
-Float_t tofmax = 1.e10;
-// GAM ELEC NHAD CHAD MUON EBREM MUHAB EDEL MUDEL MUPA TOFMAX
-geant3->SetCUTS(1.e-4, 1.e-4, 1.e-3, 1.e-4, 1.e-4, cut, cut, cut, cut, cut, 1.e-5);
-
- gAlice->TrackingLimits( 700, 2200);
-
-//
-//=======================================================================
-// ************* STEERING parameters FOR ALICE SIMULATION **************
-// --- Specify event type to be tracked through the ALICE setup
-// --- All positions are in cm, angles in degrees, and P and E in GeV
-
- switch(gentype)
- {
- case gun:
-//*********************************************
-// Example for Fixed Particle Gun *
-//*********************************************
- AliGenFixed *gener = new AliGenFixed(ntracks);
- gener->SetMomentum(3);
- gener->SetPhiRange(0);
- gener->SetThetaRange(0);
- gener->SetOrigin(0,0,0); //vertex position
- gener->SetPart(kProton); //GEANT particle type
- break;
- case box:
-//*********************************************
-// Example for Moving Particle Gun *
-//*********************************************
- AliGenBox *gener = new AliGenBox(ntracks);
- gener->SetMomentumRange(3,4);
- gener->SetPhiRange(-360,360);
- gener->SetThetaRange(2., 10.);
- gener->SetOrigin(25,25,510.5);
- gener->SetVertexSmear(kPerTrack);
- //vertex position
- gener->SetSigma(1.8, 1.8,0); //Sigma in (X,Y,Z) (cm) on IP position
- gener->SetPart(kProton); //GEANT particle type
- break;
- case scan:
-//*********************************************
-// Scanning on a grid *
-//*********************************************
- AliGenScan *gener = new AliGenScan(-1);
- gener->SetMomentumRange(20,20);
- gener->SetPhiRange(90,90);
- gener->SetThetaRange(0,0);
- //vertex position
- gener->SetSigma(3,3,0); //Sigma in (X,Y,Z) (cm) on IP position
- gener->SetPart(kMuonMinus);
- gener->SetRange(20, -100, 100, 20, -100, 100, 1, 500, 500);
- break;
- case doublescan:
-//*********************************************
-// Scanning on a grid *
-//*********************************************
- AliGenDoubleScan *gener = new AliGenDoubleScan(-1);
- gener->SetMomentumRange(4,4);
- gener->SetPhiRange(0,360);
- gener->SetThetaRange(0,0);
- //vertex position
- gener->SetSigma(3,3,0); //Sigma in (X,Y,Z) (cm) on IP position
- gener->SetPart(8);
- gener->SetRange(20, -100, 100, 20, -100, 100, 1, 500, 500);
- gener->SetDistance(1);
-
- break;
-
- case hijing:
- AliGenHIJINGpara *gener = new AliGenHIJINGpara(ntracks);
- gener->SetMomentumRange(0,999);
- gener->SetPhiRange(0,360);
- gener->SetThetaRange(0.104,33.52);
- gener->SetOrigin(0,0,0); //vertex position
- gener->SetSigma(0,0,5.6); //Sigma in (X,Y,Z) (cm) on IP position
- break;
-
- case pythia:
-//********************************************
-// Example for Charm Production with Pythia *
-//********************************************
-
- AliGenPythia *gener = new AliGenPythia(ntracks);
- gener->SetMomentumRange(0,999);
- gener->SetPhiRange(0,360);
- gener->SetThetaRange(0., 180.);
- gener->SetYRange(-10,10);
- gener->SetPtRange(0,100);
- gener->SetOrigin(0,0,0); // vertex position
- gener->SetVertexSmear(kPerEvent);
- gener->SetSigma(0,0,5.6); // Sigma in (X,Y,Z) (cm) on IP position
-// gener->SetStrucFunc(DO_Set_1);
- gener->SetProcess(mb);
- gener->SetEnergyCMS(5500.);
- break;
-
- case param:
-//*******************************************************
-// Example for J/psi Production from Parameterisation *
-//*******************************************************
- AliGenParam *gener = new AliGenParam(ntracks,upsilon_p,);
- gener->SetMomentumRange(0,999);
- gener->SetPhiRange(0,360);
- gener->SetYRange(2.5,4);
- gener->SetPtRange(0,10);
- gener->SetOrigin(0,0,0); //vertex position
- gener->SetSigma(0,0,0); //Sigma in (X,Y,Z) (cm) on IP position
- gener->SetForceDecay(dimuon);
- gener->SetCutOnChild(0);
- gener->SetTrackingFlag(0);
-
- break;
-
- case fluka:
-//*******************************************************
-// Example for a FLUKA Boundary Source *
-//*******************************************************
- AliGenFLUKAsource *gener = new AliGenFLUKAsource(-1);
- gener->AddFile("$(ALICE_ROOT)/data/all32.root");
- rootfile->cd();
- gener->SetPartFlag(7);
- gener->SetMomentumRange(0,999);
- gener->SetPhiRange(0,360);
- gener->SetThetaRange(0., 180.);
- gener->SetAgeMax(1.e-5);
-
-// 31.7 events
- gener->SetFraction(0.0315);
- break;
-
- case ntuple:
-//*******************************************************
-// Example for reading from a external file *
-//*******************************************************
- AliGenExtFile *gener = new AliGenExtFile(-1);
- gener->SetFileName("$(ALICE_ROOT)/data/pbpb.root");
- gener->SetThetaRange(0.104,33.52);
- gener->SetOrigin(0,0,0); //vertex position
- gener->SetSigma(0,0,5.6); //Sigma in (X,Y,Z) (cm) on IP position
- gener->SetVertexSmear(kPerTrack);
- gener->SetTrackingFlag(1);
- break;
-
- case halo:
-//*******************************************************
-// Example for Tunnel Halo Source *
-//*******************************************************
- AliGenHalo *gener = new AliGenHalo(ntracks);
- gener->SetFileName("/h1/morsch/marsip/marsip5.mu");
- break;
-
- case cocktail:
-//*******************************************************
-// Example for a Cocktail *
-//*******************************************************
- AliGenCocktail *gener = new AliGenCocktail();
- gener->SetMomentumRange(0,10);
- gener->SetPhiRange(0,360);
- gener->SetThetaRange(45.,135);
-
- pions = new AliGenParam(100, pion_p);
-// kaons = new AliGenParam(10 , kaon_p);
-// protons = new AliGenParam(10 , proton_p);
- gener->AddGenerator(pions , "Pions" , 100);
-// gener->AddGenerator(kaons , "Kaons" , 10);
-// gener->AddGenerator(protons, "Protons", 10);
-
- break;
- }
-
-// Activate this line if you want the vertex smearing to happen
-// track by track
-//
-
-gener->Init();
-gAlice->SetField(-2,1); //Specify maximum magnetic field in Tesla (neg. ==> default field)
-Int_t iFRAME =0;
-Int_t iMAG =1;
-Int_t iITS =0;
-Int_t iTPC =0;
-Int_t iTOF =0;
-Int_t iRICH =0;
-Int_t iZDC =0;
-Int_t iCASTOR =0;
-Int_t iTRD =0;
-Int_t iABSO =0;
-Int_t iDIPO =1;
-Int_t iHALL =1;
-Int_t iSHIL =0;
-Int_t iPIPE =1;
-Int_t iFMD =0;
-Int_t iMUON =1;
-Int_t iPHOS =0;
-Int_t iPMD =0;
-
-//=================== Alice BODY parameters =============================
-AliBODY *BODY = new AliBODY("BODY","Alice envelop");
-
-if(iFRAME) {
-//=================== FRAME parameters ============================
-AliFRAME *FRAME = new AliFRAMEv0("FRAME","Space Frame");
-}
-
-if(iMAG) {
-//=================== MAG parameters ============================
-// --- Start with Magnet since detector layouts may be depending ---
-// --- on the selected Magnet dimensions ---
-AliMAG *MAG = new AliMAG("MAG","Magnet");
-}
-
-if(iITS) {
-//=================== ITS parameters ============================
-//
-// EUCLID is a flag to output (=1) both geometry and media to two ASCII files
-// (called by default ITSgeometry.euc and ITSgeometry.tme) in a format
-// understandable to the CAD system EUCLID. The default (=0) means that you
-// dont want to use this facility.
-//
- AliITS *ITS = new AliITSv5("ITS","normal ITS");
- ITS->SetEUCLID(0);
-}
-
-if(iTPC) {
-//============================ TPC parameters ================================
-// --- This allows the user to specify sectors for the SLOW (TPC geometry 2)
-// --- Simulator. SecAL (SecAU) <0 means that ALL lower (upper)
-// --- sectors are specified, any value other than that requires at least one
-// --- sector (lower or upper)to be specified!
-// --- Reminder: sectors 1-24 are lower sectors (1-12 -> z>0, 13-24 -> z<0)
-// --- sectors 25-72 are the upper ones (25-48 -> z>0, 49-72 -> z<0)
-// --- SecLows - number of lower sectors specified (up to 6)
-// --- SecUps - number of upper sectors specified (up to 12)
-// --- Sens - sensitive strips for the Slow Simulator !!!
-// --- This does NOT work if all S or L-sectors are specified, i.e.
-// --- if SecAL or SecAU < 0
-//
-//
-//-----------------------------------------------------------------------------
-
- AliTPC *TPC = new AliTPCv3("TPC","Normal TPC");
- AliTPCD *paramd = TPC->GetDigParam();
- AliTPCParam *param = &(paramd->GetParam());
-
-// Set geometrical parameters
-
- param->SetSectorAngles(40.,0.,20.,10.);
- param->SetInnerRadiusLow(83.7);
- param->SetInnerRadiusUp(132.9);
- param->SetOuterRadiusLow(146.9);
- param->SetOuterRadiusUp(249.4);
- param->SetInSecLowEdge(81.6);
- param->SetInSecUpEdge(135.);
- param->SetOuSecLowEdge(144.2);
- param->SetOuSecUpEdge(252.1);
- param->SetEdge(1.5);
- param->SetDeadZone(1.15);
- param->Update();
-
-// set gas mixture
-
- TPC->SetGasMixt(2,20,10,-1,0.9,0.1,0.);
- TPC->SetSecAL(1);
- TPC->SetSecAU(1);
- TPC->SetSecLows(0, -1, -1, -1, -1, -1);
- TPC->SetSecUps(18, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1);
- TPC->SetSens(-1);
-}
-
-if(iTOF) {
-//=================== TOF parameters ============================
- AliTOF *TOF = new AliTOFv2("TOF","normal TOF");
-}
-
-if(iRICH) {
-//=================== RICH parameters ===========================
- AliRICH *RICH = new AliRICHv0("RICH","normal RICH");
-
- RICH->SetSMAXAR(0.03);
- RICH->SetSMAXAL(-1);
-//
-// Version 0
-// Default Segmentation
- AliRICHsegmentationV0* RsegV0 = new AliRICHsegmentationV0;
- RsegV0->SetPadSize(.8, .8);
- RsegV0->SetDAnod(0.8/3);
-// Default Response
- AliRICHresponseV0* Rresponse0 = new AliRICHresponseV0;
- AliRICHresponseCkv* RresponseCkv = new AliRICHresponseCkv;
-
-//------------------------Chambers 0-6 ----------------------------
- for (Int_t i=0; i<7; i++) {
- RICH->SetSegmentationModel(i, 1, RsegV0);
- RICH->SetResponseModel(i, mip , Rresponse0);
- RICH->SetResponseModel(i, cerenkov, RresponseCkv);
- RICH->Chamber(i).SetRSIGM(5.);
- RICH->Chamber(i).SetMUCHSP(20.);
- RICH->Chamber(i).SetMUSIGM(0.18, 0.18);
- RICH->Chamber(i).SetMAXADC( 1024);
- RICH->Chamber(i).SetSqrtKx3(0.77459667);
- RICH->Chamber(i).SetKx2(0.962);
- RICH->Chamber(i).SetKx4(0.379);
- RICH->Chamber(i).SetSqrtKy3(0.77459667);
- RICH->Chamber(i).SetKy2(0.962);
- RICH->Chamber(i).SetKy4(0.379);
- RICH->Chamber(i).SetPitch(0.25);
- RICH->SetNsec(i,1);
+ //
+ // Config file for MUON test
+ //
+
+ //=====================================================================
+ // Libraries required by geant321
+ gSystem->Load("libgeant321.so");
+ new TGeant3TGeo("C++ Interface to Geant3");
+ //=======================================================================
+ // Create the output file
+ Text_t filename[100];
+ sprintf(filename,"%sgalice.root",directory);
+ cout << ">>> Output file is " << filename << endl;
+ cout << ">>> Config.C: Creating Run Loader ..."<<endl;
+ AliRunLoader* rl=0x0;
+ rl = AliRunLoader::Open(
+ filename, AliConfig::GetDefaultEventFolderName(), "recreate");
+ if (rl == 0x0) {
+ gAlice->Fatal("Config.C","Can not instatiate the Run Loader");
+ return;
}
+ rl->SetCompressionLevel(2);
+ rl->SetNumberOfEventsPerFile(100);
+ gAlice->SetRunLoader(rl);
+
+ //AliLog::SetModuleDebugLevel("MUON", 1);
+
+ //=======================================================================
+ // Set External decayer
+ TVirtualMCDecayer *decayer = new AliDecayerPythia();
+ decayer->SetForceDecay(kAll);
+ decayer->Init();
+ gMC->SetExternalDecayer(decayer);
+
+ //
+ //=======================================================================
+ // ******* GEANT STEERING parameters FOR ALICE SIMULATION *******
+ gMC->SetProcess("DCAY",1);
+ gMC->SetProcess("PAIR",1);
+ gMC->SetProcess("COMP",1);
+ gMC->SetProcess("PHOT",1);
+ gMC->SetProcess("PFIS",0);
+ gMC->SetProcess("DRAY",0);
+ gMC->SetProcess("ANNI",1);
+ gMC->SetProcess("BREM",1);
+ gMC->SetProcess("MUNU",1);
+ gMC->SetProcess("CKOV",1);
+ gMC->SetProcess("HADR",1);
+ gMC->SetProcess("LOSS",2);
+ gMC->SetProcess("MULS",1);
+ gMC->SetProcess("RAYL",1);
+
+ Float_t cut = 1.e-3; // 1MeV cut by default
+ Float_t tofmax = 1.e10;
+
+ gMC->SetCut("CUTGAM", cut);
+ gMC->SetCut("CUTELE", cut);
+ gMC->SetCut("CUTNEU", cut);
+ gMC->SetCut("CUTHAD", cut);
+ gMC->SetCut("CUTMUO", cut);
+ gMC->SetCut("BCUTE", cut);
+ gMC->SetCut("BCUTM", cut);
+ gMC->SetCut("DCUTE", cut);
+ gMC->SetCut("DCUTM", cut);
+ gMC->SetCut("PPCUTM", cut);
+ gMC->SetCut("TOFMAX", tofmax);
+ //
+ //=======================================================================
+ // ************* STEERING parameters FOR ALICE SIMULATION **************
+ // Chamber positions
+ // From AliMUONConstants class we get :
+ // Position Z (along beam) of the chambers (in cm)
+ // (from AliMUONConstants class):
+ // 533.5, 546.5, 678.5, 693.5, 964.0, 986.0, 1251.5, 1278.5,
+ // 1416.5, 1443.5, 1610, 1625., 1710., 1725.
+ // Internal Radius (in cm)
+ // 36.4, 46.2, 66.0, 80., 80., 100., 100.
+ // External Radius (in cm)
+ // 183., 245., 395., 560., 563., 850., 900.
+ //=======================================================================
+ if (!strcmp(option,"box")) {
+ AliGenBox * gener = new AliGenBox(1);
+ gener->SetMomentumRange(20.,20.1);
+ gener->SetPhiRange(0., 360.);
+ gener->SetThetaRange(171.000,178.001);
+ gener->SetPart(13); // Muons
+ gener->SetOrigin(0.,0., 0.); //vertex position
+ gener->SetSigma(0.0, 0.0, 0.0); //Sigma in (X,Y,Z) (cm) on IP position
+ }
+ if (!strcmp(option,"gun")) {
+ //*********************************************
+ // Example for Fixed Particle Gun *
+ //*********************************************
+ AliGenFixed *gener = new AliGenFixed(ntracks);
+ gener->SetMomentum(10);
+ gener->SetPhiRange(0.);
+ gener->SetThetaRange(0.);
+ gener->SetOrigin(30,30,1200);//vertex position
+ gener->SetPart(13); //GEANT particle type 13 is muons
+ }
+ if (!strcmp(option,"scan")) {
+ AliGenScan *gener = new AliGenScan(-1);
+ gener->SetMomentumRange(10,10);
+ gener->SetPhiRange(0, 0);
+ gener->SetThetaRange(-180, -180);
+ //vertex position
+ //gener->SetSigma(1,1,0); //Sigma in (X,Y,Z) (cm) on IP position
+ gener->SetPart(kRootino);
+ gener->SetRange(100, -300., 300., 100, -300., 300., 1, 2000, 2000);
+ }
+ if (!strcmp(option,"param")) {
+ //*******************************************************
+ // Example for J/psi or Upsilon Production from Parameterisation *
+ //*******************************************************
+ AliGenParam *gener = new AliGenParam(1, AliGenMUONlib::kUpsilon);
+ gener->SetMomentumRange(0,999);
+ gener->SetPtRange(0,100.);
+ gener->SetPhiRange(0., 360.);
+ gener->SetCutOnChild(1);
+ gener->SetChildPhiRange(0.,360.);
+ gener->SetChildThetaRange(171.0,178.0);
+ gener->SetOrigin(0,0,0); //vertex position gener->SetSigma(0,0,0); //Sigma in (X,Y,Z) (cm) on IP position
+ gener->SetForceDecay(kDiMuon);
+ gener->SetTrackingFlag(1);
+ gener->Init();
+ }
+ //=============================================================
+ // Field (L3 0.4 T)
+ AliMagFMaps* field = new AliMagFMaps("Maps","Maps", 1, 1., 10., AliMagFMaps::k4kG);
+ gAlice->SetField(field);
+
+ //=================== Alice BODY parameters =============================
+ AliBODY *BODY = new AliBODY("BODY","Alice envelop");
+ //=================== ABSO parameters ============================
+ AliABSO *ABSO = new AliABSOv0("ABSO", "Muon Absorber");
+ //=================== DIPO parameters ============================
+ AliDIPO *DIPO = new AliDIPOv2("DIPO", "Dipole version 2");
+ //================== HALL parameters ============================
+ AliHALL *HALL = new AliHALL("HALL", "Alice Hall");
+ //=================== PIPE parameters ============================
+ AliPIPE *PIPE = new AliPIPEv0("PIPE", "Beam Pipe");
+ //=================== SHIL parameters ============================
+ AliSHIL *SHIL = new AliSHILv2("SHIL", "Shielding Version 2");
+
+ //=================== MUON Subsystem ===========================
+ cout << ">>> Config.C: Creating AliMUONv1 ..."<<endl;
+
+ // With the following compact ctor, what you get (in case you wonder...) is :
+ //
+ // - "FactoryV4", that is all stations using new segmentations/mapping
+ // - "sdigitizer:AliMUONSDigitizerV2", performing decalibration
+ // - "digitizer:NewDigitizerWithNoiseOldTrigger" =>
+ // digitizer=AliMUONDigitizerV3,
+ // using the "old" trigger code, performing calibration, and
+ // generating noise-only digits for the tracker.
+
+ AliMUON *MUON = new AliMUONv1("MUON");
+
+ //To get old behavior (which usage is no longer supported), please use :
+ //
+ // AliMUON* MUON = new AliMUONv1("MUON","FactoryV3",
+ // "AliMUONSDigitizerv1",
+ // "AliMUONDigitizerv2");
+ //
+ // To get brand new trigger code, please use :
+ //
+ // AliMUON *MUON = new AliMUONv1("MUON", "FactoryV4",
+ // "sdigitizer:AliMUONSDigitizerV2",
+ // "digitizer:NewDigitizerNewTrigger");
+ // activate trigger cluster-size i.e. ResponseTriggerV1 (default/v1 = 0/1)
+ // MUON->SetTriggerResponseV1(0);
+ // activate 4/4 trigger coincidence (0(default)/1 = coinc 34/44)
+ // MUON->SetTriggerCoinc44(0);
+ //
+ // To enable Trigger Chamber Efficiency, please use :
+ //
+ // AliMUON *MUON = new AliMUONv1("MUON", "FactoryV4",
+ // "sdigitizer:AliMUONSDigitizerV2",
+ // "digitizer:NewDigitizerEffTrigger");
+ //
+ // If SetAlign, the detection elements transformations
+ // are taken from the input file and not from the code
+ // MUON->SetAlign("transform.dat");
+
+ // To generate and read scaler trigger events in rawdata
+ // MUON->SetTriggerScalerEvent();
+
+ // If you want to play with builders, first reset the geometry builder,
+ // and then add yours.
+ // MUON->ResetGeometryBuilder();
+ // MUON->AddGeometryBuilder(new AliMUONSt1GeometryBuilderV2(MUON));
+ // MUON->AddGeometryBuilder(new AliMUONSt2GeometryBuilderV2(MUON));
+ // MUON->AddGeometryBuilder(new AliMUONSlatGeometryBuilder(MUON));
+ // MUON->AddGeometryBuilder(new AliMUONTriggerGeometryBuilder(MUON));
+}
+
+Float_t EtaToTheta(Float_t arg){
+ return (180./TMath::Pi())*2.*atan(exp(-arg));
}
-
-if(iZDC) {
-//=================== ZDC parameters ============================
-
- AliZDC *ZDC = new AliZDCv1("ZDC","normal ZDC");
-}
-
-if(iCASTOR) {
-//=================== CASTOR parameters ============================
-
- AliCASTOR *CASTOR = new AliCASTORv1("CASTOR","normal CASTOR");
-}
-
-if(iTRD) {
-//=================== TRD parameters ============================
-
- AliTRD *TRD = new AliTRDv2("TRD","TRD version 2");
-}
-
-
-if(iABSO) {
-//=================== ABSO parameters ============================
- AliABSO *ABSO = new AliABSOv1("ABSO","Muon Absorber");
-}
-
-if(iDIPO) {
-//=================== DIPO parameters ============================
-
- AliDIPO *DIPO = new AliDIPOv2("DIPO","Dipole version 2");
-}
-
-if(iHALL) {
-//=================== HALL parameters ============================
- AliHALL *HALL = new AliHALL("HALL","Alice Hall");
-}
-
-
-
-if(iSHIL) {
-//=================== SHIL parameters ============================
- AliSHIL *SHIL = new AliSHILv1("SHIL","Shielding");
-}
-
-
-if(iPIPE) {
-//=================== PIPE parameters ============================
- AliPIPE *PIPE = new AliPIPEv0("PIPE","Beam Pipe");
-}
-
-
-if(iFMD) {
-//=================== FMD parameters ============================
- AliFMD *FMD = new AliFMDv1("FMD","normal FMD");
-}
-
-if(iMUON) {
-//=================== MUON parameters ===========================
-
-AliMUON *MUON = new AliMUONv1("MUON","normal MUON");
- MUON->SetIshunt(0);
- MUON->SetMaxStepGas(0.1);
- MUON->SetMaxStepAlu(0.1);
-//
-// Version 0
-//
-// First define the number of planes that are segmented (1 or 2) by a call
-// to SetNsec.
-// Then chose for each chamber (chamber plane) the segmentation
-// and response model.
-// They should be equal for the two chambers of each station. In a future
-// version this will be enforced.
-//
-//
- Int_t chamber;
- Int_t station;
-// Default response
- AliMUONResponseV0* response0 = new AliMUONResponseV0;
- response0->SetSqrtKx3(0.7131);
- response0->SetKx2(1.0107);
- response0->SetKx4(0.4036);
- response0->SetSqrtKy3(0.7642);
- response0->SetKy2(0.9706);
- response0->SetKy4(0.3831);
- response0->SetPitch(0.25);
- response0->SetSigmaIntegration(10.);
- response0->SetChargeSlope(50);
- response0->SetChargeSpread(0.18, 0.18);
- response0->SetMaxAdc(4096);
- response0->SetZeroSuppression(6);
-//--------------------------------------------------------
-// Configuration for Chamber TC1/2 (Station 1) ----------
-//^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
- Float_t rseg1[4]={17.5, 55.2, 71.3, 95.5};
- Int_t nseg1[4]={4, 4, 2, 1};
-//
- chamber=1;
-//^^^^^^^^^
- MUON->SetNsec(chamber-1,2);
-//
- AliMUONSegmentationV01 *seg11=new AliMUONSegmentationV01;
-
- seg11->SetSegRadii(rseg1);
- seg11->SetPadSize(3, 0.5);
- seg11->SetDAnod(3.0/3./4);
- seg11->SetPadDivision(nseg1);
-
- MUON->SetSegmentationModel(chamber-1, 1, seg11);
-//
- AliMUONSegmentationV02 *seg12=new AliMUONSegmentationV02;
- seg12->SetSegRadii(rseg1);
- seg12->SetPadSize(0.75, 2.0);
- seg12->SetDAnod(3.0/3./4);
- seg12->SetPadDivision(nseg1);
-
- MUON->SetSegmentationModel(chamber-1, 2, seg12);
-
- MUON->SetResponseModel(chamber-1, response0);
-
- chamber=2;
-//^^^^^^^^^
-//
- MUON->SetNsec(chamber-1,2);
-//
- AliMUONSegmentationV01 *seg21=new AliMUONSegmentationV01;
- seg21->SetSegRadii(rseg1);
- seg21->SetPadSize(3, 0.5);
- seg21->SetDAnod(3.0/3./4);
- seg21->SetPadDivision(nseg1);
- MUON->SetSegmentationModel(chamber-1, 1, seg21);
-//
- AliMUONSegmentationV02 *seg22=new AliMUONSegmentationV02;
- seg22->SetSegRadii(rseg1);
- seg22->SetPadSize(0.75, 2.);
- seg22->SetDAnod(3.0/3./4);
- seg22->SetPadDivision(nseg1);
- MUON->SetSegmentationModel(chamber-1, 2, seg22);
-
- MUON->SetResponseModel(chamber-1, response0);
-//
-//--------------------------------------------------------
-// Configuration for Chamber TC3/4 -----------------------
-///^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-// Float_t rseg2[4]={23.5, 87.7, 122.4, 122.5};
- Float_t rseg2[4]={23.5, 47.1, 87.7, 122.5};
- Int_t nseg2[4]={4, 4, 2, 1};
-//
- chamber=3;
-//^^^^^^^^^
- MUON->SetNsec(chamber-1,2);
-//
- AliMUONSegmentationV01 *seg31=new AliMUONSegmentationV01;
- seg31->SetSegRadii(rseg2);
- seg31->SetPadSize(6, 0.5);
- seg31->SetDAnod(3.0/3./4);
- seg31->SetPadDivision(nseg2);
- MUON->SetSegmentationModel(chamber-1, 1, seg31);
-//
- AliMUONSegmentationV02 *seg32=new AliMUONSegmentationV02;
- seg32->SetSegRadii(rseg2);
- seg32->SetPadSize(0.75, 4.);
- seg32->SetPadDivision(nseg2);
- seg32->SetDAnod(3.0/3./4);
-
- MUON->SetSegmentationModel(chamber-1, 2, seg32);
-
- MUON->SetResponseModel(chamber-1, response0);
-
- chamber=4;
-//^^^^^^^^^
-//
- MUON->SetNsec(chamber-1,2);
-//
- AliMUONSegmentationV01 *seg41=new AliMUONSegmentationV01;
- seg41->SetSegRadii(rseg2);
- seg41->SetPadSize(6, 0.5);
- seg41->SetDAnod(3.0/3./4);
- seg41->SetPadDivision(nseg2);
- MUON->SetSegmentationModel(chamber-1, 1, seg41);
-//
- AliMUONSegmentationV02 *seg42=new AliMUONSegmentationV02;
- seg42->SetSegRadii(rseg2);
- seg42->SetPadSize(0.75, 4.);
- seg42->SetPadDivision(nseg2);
- seg42->SetDAnod(3.0/3./4);
-
- MUON->SetSegmentationModel(chamber-1, 2, seg42);
-
- MUON->SetResponseModel(chamber-1, response0);
-
-
-//--------------------------------------------------------
-// Configuration for Chamber TC5/6 -----------------------
-//^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
- seg5 = new AliMUONSegmentationV1;
- AliMUONResponseV0* response5 = new AliMUONResponseV0;
- // K3 = 0.62
- response5->SetSqrtKx3(0.78740079);
- response5->SetKx2(0.95237319); // 0.5 * kPI * (1- 0.5*sqrtky3 )
- response5->SetKx4(0.37480633); // 0.25/TMath::ATan(sqrtkx3)
- // K3 = 0.55
- response5->SetSqrtKy3(0.74161985);
- response5->SetKy2(0.98832946);
- response5->SetKy4(0.39177817);
- response5->SetPitch(0.325);
- response5->SetSigmaIntegration(10.);
- response5->SetChargeSlope(50);
- response5->SetChargeSpread(0.4, 0.4);
- response5->SetMaxAdc(4096);
- response5->SetZeroSuppression(6);
-
-
- chamber=5;
- MUON->SetNsec(chamber-1,1);
- MUON->SetSegmentationModel(chamber-1, 1, seg5);
- MUON->SetResponseModel(chamber-1, response5);
-
- chamber=6;
- MUON->SetNsec(chamber-1,1);
- MUON->SetSegmentationModel(chamber-1, 1, seg5);
- MUON->SetResponseModel(chamber-1, response5);
-//
-// Station 3
- station=3;
- MUON->SetPadSize(station, 1, 0.975, 0.55);
-
-//--------------------------------------------------------
-// Configuration for Chamber TC7/8 (Station 4) ----------
-//^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
- Int_t nseg4[4]={4, 4, 2, 1};
-
- chamber=7;
-//^^^^^^^^^
- MUON->SetNsec(chamber-1,2);
-//
- AliMUONSegmentationV04 *seg71=new AliMUONSegmentationV04;
- seg71->SetPadSize(10.,0.5);
- seg71->SetDAnod(0.25);
- seg71->SetPadDivision(nseg4);
- MUON->SetSegmentationModel(chamber-1, 1, seg71);
- AliMUONSegmentationV05 *seg72=new AliMUONSegmentationV05;
- seg72->SetPadSize(1,10);
- seg72->SetDAnod(0.25);
- seg72->SetPadDivision(nseg4);
- MUON->SetSegmentationModel(chamber-1, 2, seg72);
-
- MUON->SetResponseModel(chamber-1, response0);
-
- chamber=8;
-//^^^^^^^^^
- MUON->SetNsec(chamber-1,2);
- AliMUONSegmentationV04 *seg81=new AliMUONSegmentationV04;
- seg81->SetPadSize(10., 0.5);
- seg81->SetPadDivision(nseg4);
- seg81->SetDAnod(0.25);
- MUON->SetSegmentationModel(chamber-1, 1, seg81);
-
- AliMUONSegmentationV05 *seg82=new AliMUONSegmentationV05;
- seg82->SetPadSize(1, 10);
- seg82->SetPadDivision(nseg4);
- seg82->SetDAnod(0.25);
- MUON->SetSegmentationModel(chamber-1, 2, seg82);
-
- MUON->SetResponseModel(chamber-1, response0);
-//--------------------------------------------------------
-// Configuration for Chamber TC9/10 (Station 5) ---------
-//^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
- chamber=9;
-//^^^^^^^^^
- MUON->SetNsec(chamber-1,2);
-//
- AliMUONSegmentationV04 *seg91=new AliMUONSegmentationV04;
- seg91->SetPadSize(10.,0.5);
- seg91->SetDAnod(0.25);
- seg91->SetPadDivision(nseg4);
- MUON->SetSegmentationModel(chamber-1, 1, seg91);
-
- AliMUONSegmentationV05 *seg92=new AliMUONSegmentationV05;
- seg92->SetPadSize(1,10);
- seg92->SetDAnod(0.25);
- seg92->SetPadDivision(nseg4);
-
- MUON->SetSegmentationModel(chamber-1, 2, seg92);
-
- MUON->SetResponseModel(chamber-1, response0);
-
- chamber=10;
-//^^^^^^^^^
- MUON->SetNsec(chamber-1,2);
- AliMUONSegmentationV04 *seg101=new AliMUONSegmentationV04;
- seg101->SetPadSize(10., 0.5);
- seg101->SetPadDivision(nseg4);
- seg101->SetDAnod(0.25);
- MUON->SetSegmentationModel(chamber-1, 1, seg101);
-
- AliMUONSegmentationV05 *seg102=new AliMUONSegmentationV05;
- seg102->SetPadSize(1,10);
- seg102->SetPadDivision(nseg4);
- seg102->SetDAnod(0.25);
- MUON->SetSegmentationModel(chamber-1, 2, seg102);
-
- MUON->SetResponseModel(chamber-1, response0);
-
-//--------------------------------------------------------
-// Configuration for Trigger staions ---------------------
-//^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-// Cluster-size off
- AliMUONResponseTrigger* responseTrigger0 = new AliMUONResponseTrigger;
-// Cluster-size on
-// AliMUONResponseTriggerV1* responseTrigger0 = new AliMUONResponseTriggerV1;
-
- chamber=11;
- MUON->SetNsec(chamber-1,2);
- AliMUONSegmentationTriggerX *seg111=new AliMUONSegmentationTriggerX;
- MUON->SetSegmentationModel(chamber-1, 1, seg111);
- AliMUONSegmentationTriggerY *seg112=new AliMUONSegmentationTriggerY;
- MUON->SetSegmentationModel(chamber-1, 2, seg112);
-
- MUON->SetResponseModel(chamber-1, responseTrigger0);
-
- chamber=12;
- MUON->SetNsec(chamber-1,2);
- AliMUONSegmentationTriggerX *seg121=new AliMUONSegmentationTriggerX;
- MUON->SetSegmentationModel(chamber-1, 1, seg121);
- AliMUONSegmentationTriggerY *seg122=new AliMUONSegmentationTriggerY;
- MUON->SetSegmentationModel(chamber-1, 2, seg122);
-
- MUON->SetResponseModel(chamber-1, responseTrigger0);
-
- chamber=13;
- MUON->SetNsec(chamber-1,2);
- AliMUONSegmentationTriggerX *seg131=new AliMUONSegmentationTriggerX;
- MUON->SetSegmentationModel(chamber-1, 1, seg131);
- AliMUONSegmentationTriggerY *seg132=new AliMUONSegmentationTriggerY;
- MUON->SetSegmentationModel(chamber-1, 2, seg132);
- MUON->SetResponseModel(chamber-1, responseTrigger0);
-
- chamber=14;
- MUON->SetNsec(chamber-1,2);
- AliMUONSegmentationTriggerX *seg141=new AliMUONSegmentationTriggerX;
- MUON->SetSegmentationModel(chamber-1, 1, seg141);
- AliMUONSegmentationTriggerY *seg142=new AliMUONSegmentationTriggerY;
- MUON->SetSegmentationModel(chamber-1, 2, seg142);
-
- MUON->SetResponseModel(chamber-1, responseTrigger0);
-
-}
-
-
-if(iPHOS) {
-//=================== PHOS parameters ===========================
-
-AliPHOS *PHOS = new AliPHOSv1("PHOS","normal PHOS");
-// * PHOSflags: YES: X<>0 NO: X=0
-// * PHOSflags(1) : -----X Create branch for TObjArray of AliPHOSCradle
-// * ----X- Create file (ftn03 on HP-UX) with list of SHAKER particles (7Mb/event)
-// *
-PHOS->SetFlags(000001);
-PHOS->SetRadius(460); //Distance from beam to PHOS crystals.
-// (crystal_side_size,crystal_length,wrap_thikness,air_thikness,PIN_size,PIN length)
-PHOS->SetCell(2.2, 18., 0.01, 0.01, 1., 0.1);
-PHOS->SetCradleSize(104, 88, 4); // Nz (along beam), Nphi, Ncradles
-PHOS->SetCradleA(0); //Angle between Cradles
-PHOS->SetCPV(1., 2.); //CPV thikness, CPV-PHOS distance
-// * ===============
-// * PHOS extra parameters (contact Maxim Volkov volkov@mail.cern.ch)
-// * 1. STE_THICK Steel cover thickness
-// * 2. SUP_Y Crystal support height
-// * 3. FTIU_THICK Thermo Insulating outer cover Upper plate thickness
-// * 4. UFP_Y Upper Polystyrene Foam plate thickness
-// * 5. TCB_THICK Thermo insulating Crystal Block wall thickness
-// * 6. UCP_Y Upper Cooling Plate thickness
-// * 7. ASP_Y Al Support Plate thickness
-// * 8. TIP_Y Lower Thermo Insulating Plate thickness
-// * 9. TXP_Y Lower Textolit Plate thickness
-PHOS->SetExtra(0.001, 6.95, 4., 5., 2., 0.06, 10., 3., 1.);
-PHOS->SetTextolitWall(209., 71., 250.); //Textolit Wall box dimentions
-PHOS->SetInnerAir(206., 66., 244.); //Inner AIR volume dimensions
-// * ===============================
-// * 1. FTI_X Foam Thermo Insulating outer cover dimensions
-// * 2. FTI_Y ==//==
-// * 3. FTI_Z ==//==
-// * 4. FTI_R Distance from IP to Foam Thermo Insulating top plate
-PHOS->SetFoam(214.6, 80., 260., 467.);
-// =================================
-// *******************************************************************************
-// * KINE 700 - SHAKER generator
-// * KINE 700 x y z NDNDY YLIM PTLIM ChargeFlag
-// * JWEAK=0
-// * JPI0=JETA=1
-// * JPIC=JPRO=JKAC=JKA0=JRHO=JOME=JPHI=JPSI=JDRY=ChargeFlag
-// * Int_t JWEI; // Unweighted generation
-// * Int_t NDNDY; // Density of charged particles
-// * Float_t YLIM; // Rapidity Limit
-// * Float_t PTLIM; // Pt limit in GeV/c
-// * Int_t JWEAK; // Disable weak decays
-// * Int_t JPI0; // pi0 generation
-// * Int_t JETA; // eta generation
-// * Int_t JPIC; // pi+/- generation
-// * Int_t JPRO; // proton generation
-// * Int_t JKAC; // K+/- generation
-// * Int_t JKA0; // K0 generation
-// * Int_t JRHO; // rho generation
-// * Int_t JOME; // omega generation
-// * Int_t JPHI; // phi generation
-// * Int_t JPSI; // J/psi generation
-// * Int_t JDRY; // Drell-Yan generation
-// * KINE 700 5. 175. 0. 800. 1.5 5. 1.
-// *******************************************************************************
-}
-
-if(iPMD) {
-//=================== PMD parameters ============================
-
-// Must be defined AFTER PHOS
-AliPMD *PMD = new AliPMDv1("PMD","normal PMD");
-PMD->SetPAR(1., 1., 0.8, 0.02);
-PMD->SetIN(6., 20., 600., 27., 27.);
-PMD->SetGEO(0.0, 0.2, 4.);
-PMD->SetPadSize(0.8, 1.0, 1.2, 1.5);
-}
-}
-
-
-
-
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff