char im[5] ;
Bool_t anyModuleCreated=0 ;
for (Int_t iModule = 0; iModule < 5 ; iModule++ ) {
- sprintf(im,"%d",iModule+1) ;
+ snprintf(im,5,"%d",iModule+1) ;
if(strstr(GetTitle(),im)==0 && strcmp(GetTitle(),"IHEP")!=0 && strcmp(GetTitle(),"noCPV")!=0)
continue ;
anyModuleCreated=1 ;
AliPHOSGeometry * geom = GetGeometry() ;
AliPHOSEMCAGeometry * emcg = geom->GetEMCAGeometry() ;
+ Float_t par[4];
+ Int_t ipar;
// ======= Define the strip ===============
- gMC->Gsvolu("PSTR", "BOX ", idtmed[716], emcg->GetStripHalfSize(), 3) ; //Made of steel
+ for (ipar=0; ipar<3; ipar++) par[ipar] = *(emcg->GetStripHalfSize() + ipar);
+ gMC->Gsvolu("PSTR", "BOX ", idtmed[716], par, 3) ; //Made of steel
- // --- define steel volume (cell of the strip unit)
-// gMC->Gsvolu("PCEL", "BOX ", idtmed[798], emcg->GetSteelCellHalfSize(), 3);
- gMC->Gsvolu("PCEL", "BOX ", idtmed[798], emcg->GetAirCellHalfSize(), 3);
-
- // --- define wrapped crystal and put it into steel cell
-
- gMC->Gsvolu("PWRA", "BOX ", idtmed[702], emcg->GetWrappedHalfSize(), 3);
- Float_t * pin = emcg->GetAPDHalfSize() ;
- Float_t * preamp = emcg->GetPreampHalfSize() ;
- Float_t y = (emcg->GetAirGapLed()-2*pin[1]-2*preamp[1])/2;
- gMC->Gspos("PWRA", 1, "PCEL", 0.0, y, 0.0, 0, "ONLY") ;
+ // --- define steel volume (cell of the strip unit)
+ for (ipar=0; ipar<3; ipar++) par[ipar] = *(emcg->GetAirCellHalfSize() + ipar);
+ gMC->Gsvolu("PCEL", "BOX ", idtmed[798], par, 3);
+
+ // --- define wrapped crystal and put it into steel cell
+
+ for (ipar=0; ipar<3; ipar++) par[ipar] = *(emcg->GetWrappedHalfSize() + ipar);
+ gMC->Gsvolu("PWRA", "BOX ", idtmed[702], par, 3);
+ const Float_t * pin = emcg->GetAPDHalfSize() ;
+ const Float_t * preamp = emcg->GetPreampHalfSize() ;
+ Float_t y = (emcg->GetAirGapLed()-2*pin[1]-2*preamp[1])/2;
+ gMC->Gspos("PWRA", 1, "PCEL", 0.0, y, 0.0, 0, "ONLY") ;
- // --- Define crystal and put it into wrapped crystall ---
- gMC->Gsvolu("PXTL", "BOX ", idtmed[699], emcg->GetCrystalHalfSize(), 3) ;
- gMC->Gspos("PXTL", 1, "PWRA", 0.0, 0.0, 0.0, 0, "ONLY") ;
+ // --- Define crystal and put it into wrapped crystall ---
+ for (ipar=0; ipar<3; ipar++) par[ipar] = *(emcg->GetCrystalHalfSize() + ipar);
+ gMC->Gsvolu("PXTL", "BOX ", idtmed[699], par, 3) ;
+ gMC->Gspos("PXTL", 1, "PWRA", 0.0, 0.0, 0.0, 0, "ONLY") ;
- // --- define APD/PIN preamp and put it into AirCell
+ // --- define APD/PIN preamp and put it into AirCell
- gMC->Gsvolu("PPIN", "BOX ", idtmed[705], emcg->GetAPDHalfSize(), 3) ;
- Float_t * crystal = emcg->GetCrystalHalfSize() ;
- y = crystal[1] + emcg->GetAirGapLed() /2 - preamp[1];
- gMC->Gspos("PPIN", 1, "PCEL", 0.0, y, 0.0, 0, "ONLY") ;
-
- gMC->Gsvolu("PREA", "BOX ", idtmed[711], emcg->GetPreampHalfSize(), 3) ; // Here I assumed preamp
- // as a printed Circuit
- y = crystal[1] + emcg->GetAirGapLed() /2 + pin[1] ; // May it should be changed
- gMC->Gspos("PREA", 1, "PCEL", 0.0, y, 0.0, 0, "ONLY") ; // to ceramics?
-
-
- // --- Fill strip with wrapped cristals in steel cells
-
- Float_t* splate = emcg->GetSupportPlateHalfSize();
- y = -splate[1] ;
-// Float_t* acel = emcg->GetSteelCellHalfSize() ;
- Float_t* acel = emcg->GetAirCellHalfSize() ;
-
- for(Int_t lev = 2, icel = 1; icel <= emcg->GetNCellsXInStrip()*emcg->GetNCellsZInStrip(); icel += 2, lev += 2){
- Float_t x = (2*(lev / 2) - 1 - emcg->GetNCellsXInStrip())* acel[0] ;
- Float_t z = acel[2];
- gMC->Gspos("PCEL", icel, "PSTR", x, y, +z, 0, "ONLY") ;
- gMC->Gspos("PCEL", icel + 1, "PSTR", x, y, -z, 0, "ONLY") ;
- }
-
- // --- define the support plate, hole in it and position it in strip ----
- gMC->Gsvolu("PSUP", "BOX ", idtmed[701], emcg->GetSupportPlateHalfSize(), 3) ;
-
- gMC->Gsvolu("PSHO", "BOX ", idtmed[798], emcg->GetSupportPlateInHalfSize(), 3) ;
- Float_t z = emcg->GetSupportPlateThickness()/2 ;
- gMC->Gspos("PSHO", 1, "PSUP", 0.0, 0.0, z, 0, "ONLY") ;
-
- y = acel[1] ;
- gMC->Gspos("PSUP", 1, "PSTR", 0.0, y, 0.0, 0, "ONLY") ;
-
-
- // ========== Fill module with strips and put them into inner thermoinsulation=============
- gMC->Gsvolu("PTII", "BOX ", idtmed[706], emcg->GetInnerThermoHalfSize(), 3) ;
-
- Float_t * inthermo = emcg->GetInnerThermoHalfSize() ;
- Float_t * strip = emcg->GetStripHalfSize() ;
- y = inthermo[1] - strip[1] ;
- Int_t irow;
- Int_t nr = 1 ;
- Int_t icol ;
-
- for(irow = 0; irow < emcg->GetNStripX(); irow ++){
- Float_t x = (2*irow + 1 - emcg->GetNStripX())* strip[0] ;
- for(icol = 0; icol < emcg->GetNStripZ(); icol ++){
- z = (2*icol + 1 - emcg->GetNStripZ()) * strip[2] ;
- gMC->Gspos("PSTR", nr, "PTII", x, y, z, 0, "ONLY") ;
- nr++ ;
- }
- }
-
-
- // ------- define the air gap between thermoinsulation and cooler
- gMC->Gsvolu("PAGA", "BOX ", idtmed[798], emcg->GetAirGapHalfSize(), 3) ;
- Float_t * agap = emcg->GetAirGapHalfSize() ;
- y = agap[1] - inthermo[1] ;
-
- gMC->Gspos("PTII", 1, "PAGA", 0.0, y, 0.0, 0, "ONLY") ;
+ for (ipar=0; ipar<3; ipar++) par[ipar] = *(emcg->GetAPDHalfSize() + ipar);
+ gMC->Gsvolu("PPIN", "BOX ", idtmed[705], par, 3) ;
+ const Float_t * crystal = emcg->GetCrystalHalfSize() ;
+ y = crystal[1] + emcg->GetAirGapLed() /2 - preamp[1];
+ gMC->Gspos("PPIN", 1, "PCEL", 0.0, y, 0.0, 0, "ONLY") ;
+ for (ipar=0; ipar<3; ipar++) par[ipar] = *(emcg->GetPreampHalfSize() + ipar);
+ gMC->Gsvolu("PREA", "BOX ", idtmed[711], par, 3) ; // Here I assumed preamp as a printed Circuit
+ y = crystal[1] + emcg->GetAirGapLed() /2 + pin[1] ; // May it should be changed
+ gMC->Gspos("PREA", 1, "PCEL", 0.0, y, 0.0, 0, "ONLY") ; // to ceramics?
+
+
+ // --- Fill strip with wrapped cristals in steel cells
+
+ const Float_t* splate = emcg->GetSupportPlateHalfSize();
+ y = -splate[1] ;
+ const Float_t* acel = emcg->GetAirCellHalfSize() ;
+
+ for(Int_t lev = 2, icel = 1;
+ icel <= emcg->GetNCellsXInStrip()*emcg->GetNCellsZInStrip();
+ icel += 2, lev += 2) {
+ Float_t x = (2*(lev / 2) - 1 - emcg->GetNCellsXInStrip())* acel[0] ;
+ Float_t z = acel[2];
+ gMC->Gspos("PCEL", icel, "PSTR", x, y, +z, 0, "ONLY") ;
+ gMC->Gspos("PCEL", icel + 1, "PSTR", x, y, -z, 0, "ONLY") ;
+ }
+ // --- define the support plate, hole in it and position it in strip ----
+ for (ipar=0; ipar<3; ipar++) par[ipar] = *(emcg->GetSupportPlateHalfSize() + ipar);
+ gMC->Gsvolu("PSUP", "BOX ", idtmed[701], par, 3) ;
+
+ for (ipar=0; ipar<3; ipar++) par[ipar] = *(emcg->GetSupportPlateInHalfSize() + ipar);
+ gMC->Gsvolu("PSHO", "BOX ", idtmed[798], par, 3) ;
+ Float_t z = emcg->GetSupportPlateThickness()/2 ;
+ gMC->Gspos("PSHO", 1, "PSUP", 0.0, 0.0, z, 0, "ONLY") ;
+ y = acel[1] ;
+ gMC->Gspos("PSUP", 1, "PSTR", 0.0, y, 0.0, 0, "ONLY") ;
- // ------- define the Al passive cooler
- gMC->Gsvolu("PCOR", "BOX ", idtmed[701], emcg->GetCoolerHalfSize(), 3) ;
- Float_t * cooler = emcg->GetCoolerHalfSize() ;
- y = cooler[1] - agap[1] ;
-
- gMC->Gspos("PAGA", 1, "PCOR", 0.0, y, 0.0, 0, "ONLY") ;
+
+ // ========== Fill module with strips and put them into inner thermoinsulation=============
+ for (ipar=0; ipar<3; ipar++) par[ipar] = *(emcg->GetInnerThermoHalfSize() + ipar);
+ gMC->Gsvolu("PTII", "BOX ", idtmed[706], par, 3) ;
+
+ const Float_t * inthermo = emcg->GetInnerThermoHalfSize() ;
+ const Float_t * strip = emcg->GetStripHalfSize() ;
+ y = inthermo[1] - strip[1] ;
+ Int_t irow;
+ Int_t nr = 1 ;
+ Int_t icol ;
+
+ for(irow = 0; irow < emcg->GetNStripX(); irow ++){
+ Float_t x = (2*irow + 1 - emcg->GetNStripX())* strip[0] ;
+ for(icol = 0; icol < emcg->GetNStripZ(); icol ++){
+ z = (2*icol + 1 - emcg->GetNStripZ()) * strip[2] ;
+ gMC->Gspos("PSTR", nr, "PTII", x, y, z, 0, "ONLY") ;
+ nr++ ;
+ }
+ }
+
+
+ // ------- define the air gap between thermoinsulation and cooler
+ for (ipar=0; ipar<3; ipar++) par[ipar] = *(emcg->GetAirGapHalfSize() + ipar);
+ gMC->Gsvolu("PAGA", "BOX ", idtmed[798], par, 3) ;
+ const Float_t * agap = emcg->GetAirGapHalfSize() ;
+ y = agap[1] - inthermo[1] ;
+
+ gMC->Gspos("PTII", 1, "PAGA", 0.0, y, 0.0, 0, "ONLY") ;
- // ------- define the outer thermoinsulating cover
- gMC->Gsvolu("PTIO", "TRD1", idtmed[706], emcg->GetOuterThermoParams(), 4) ;
- Float_t * outparams = emcg->GetOuterThermoParams() ;
- Int_t idrotm[99] ;
- AliMatrix(idrotm[1], 90.0, 0.0, 0.0, 0.0, 90.0, 270.0) ;
- // Frame in outer thermoinsulation and so on: z out of beam, y along beam, x across beam
-
- z = outparams[3] - cooler[1] ;
- gMC->Gspos("PCOR", 1, "PTIO", 0., 0.0, z, idrotm[1], "ONLY") ;
-
+ // ------- define the Al passive cooler
+ for (ipar=0; ipar<3; ipar++) par[ipar] = *(emcg->GetCoolerHalfSize() + ipar);
+ gMC->Gsvolu("PCOR", "BOX ", idtmed[701], par, 3) ;
+ const Float_t * cooler = emcg->GetCoolerHalfSize() ;
+ y = cooler[1] - agap[1] ;
+
+ gMC->Gspos("PAGA", 1, "PCOR", 0.0, y, 0.0, 0, "ONLY") ;
+
+ // ------- define the outer thermoinsulating cover
+ for (ipar=0; ipar<4; ipar++) par[ipar] = *(emcg->GetOuterThermoParams() + ipar);
+ gMC->Gsvolu("PTIO", "TRD1", idtmed[706], par, 4) ;
+ const Float_t * outparams = emcg->GetOuterThermoParams() ;
+
+ Int_t idrotm[99] ;
+ AliMatrix(idrotm[1], 90.0, 0.0, 0.0, 0.0, 90.0, 270.0) ;
+ // Frame in outer thermoinsulation and so on: z out of beam, y along beam, x across beam
+
+ z = outparams[3] - cooler[1] ;
+ gMC->Gspos("PCOR", 1, "PTIO", 0., 0.0, z, idrotm[1], "ONLY") ;
+
// -------- Define the outer Aluminium cover -----
- gMC->Gsvolu("PCOL", "TRD1", idtmed[701], emcg->GetAlCoverParams(), 4) ;
- Float_t * covparams = emcg->GetAlCoverParams() ;
- z = covparams[3] - outparams[3] ;
- gMC->Gspos("PTIO", 1, "PCOL", 0., 0.0, z, 0, "ONLY") ;
-
- // --------- Define front fiberglass cover -----------
- gMC->Gsvolu("PFGC", "BOX ", idtmed[717], emcg->GetFiberGlassHalfSize(), 3) ;
- z = - outparams[3] ;
- gMC->Gspos("PFGC", 1, "PCOL", 0., 0.0, z, 0, "ONLY") ;
-
- //=============This is all with cold section==============
-
-
- //------ Warm Section --------------
- gMC->Gsvolu("PWAR", "BOX ", idtmed[701], emcg->GetWarmAlCoverHalfSize(), 3) ;
- Float_t * warmcov = emcg->GetWarmAlCoverHalfSize() ;
-
- // --- Define the outer thermoinsulation ---
- gMC->Gsvolu("PWTI", "BOX ", idtmed[706], emcg->GetWarmThermoHalfSize(), 3) ;
- Float_t * warmthermo = emcg->GetWarmThermoHalfSize() ;
- z = -warmcov[2] + warmthermo[2] ;
-
- gMC->Gspos("PWTI", 1, "PWAR", 0., 0.0, z, 0, "ONLY") ;
-
- // --- Define cables area and put in it T-supports ----
- gMC->Gsvolu("PCA1", "BOX ", idtmed[718], emcg->GetTCables1HalfSize(), 3) ;
- Float_t * cbox = emcg->GetTCables1HalfSize() ;
-
- gMC->Gsvolu("PBE1", "BOX ", idtmed[701], emcg->GetTSupport1HalfSize(), 3) ;
- Float_t * beams = emcg->GetTSupport1HalfSize() ;
- Int_t isup ;
- for(isup = 0; isup < emcg->GetNTSuppots(); isup++){
- Float_t x = -cbox[0] + beams[0] + (2*beams[0]+emcg->GetTSupportDist())*isup ;
- gMC->Gspos("PBE1", isup, "PCA1", x, 0.0, 0.0, 0, "ONLY") ;
- }
-
- z = -warmthermo[2] + cbox[2];
- gMC->Gspos("PCA1", 1, "PWTI", 0.0, 0.0, z, 0, "ONLY") ;
-
- gMC->Gsvolu("PCA2", "BOX ", idtmed[718], emcg->GetTCables2HalfSize(), 3) ;
- Float_t * cbox2 = emcg->GetTCables2HalfSize() ;
-
- gMC->Gsvolu("PBE2", "BOX ", idtmed[701], emcg->GetTSupport2HalfSize(), 3) ;
- for(isup = 0; isup < emcg->GetNTSuppots(); isup++){
- Float_t x = -cbox[0] + beams[0] + (2*beams[0]+emcg->GetTSupportDist())*isup ;
- gMC->Gspos("PBE2", isup, "PCA2", x, 0.0, 0.0, 0, "ONLY") ;
- }
-
- z = -warmthermo[2] + 2*cbox[2] + cbox2[2];
- gMC->Gspos("PCA2", 1, "PWTI", 0.0, 0.0, z, 0, "ONLY") ;
-
+ for (ipar=0; ipar<4; ipar++) par[ipar] = *(emcg->GetAlCoverParams() + ipar);
+ gMC->Gsvolu("PCOL", "TRD1", idtmed[701], par, 4) ;
+ const Float_t * covparams = emcg->GetAlCoverParams() ;
+ z = covparams[3] - outparams[3] ;
+ gMC->Gspos("PTIO", 1, "PCOL", 0., 0.0, z, 0, "ONLY") ;
+
+ // --------- Define front fiberglass cover -----------
+ for (ipar=0; ipar<3; ipar++) par[ipar] = *(emcg->GetFiberGlassHalfSize() + ipar);
+ gMC->Gsvolu("PFGC", "BOX ", idtmed[717], par, 3) ;
+ z = - outparams[3] ;
+ gMC->Gspos("PFGC", 1, "PCOL", 0., 0.0, z, 0, "ONLY") ;
+
+ //=============This is all with cold section==============
+
+ //------ Warm Section --------------
+ for (ipar=0; ipar<3; ipar++) par[ipar] = *(emcg->GetWarmAlCoverHalfSize() + ipar);
+ gMC->Gsvolu("PWAR", "BOX ", idtmed[701], par, 3) ;
+ const Float_t * warmcov = emcg->GetWarmAlCoverHalfSize() ;
+
+ // --- Define the outer thermoinsulation ---
+ for (ipar=0; ipar<3; ipar++) par[ipar] = *(emcg->GetWarmThermoHalfSize() + ipar);
+ gMC->Gsvolu("PWTI", "BOX ", idtmed[706], par, 3) ;
+ const Float_t * warmthermo = emcg->GetWarmThermoHalfSize() ;
+ z = -warmcov[2] + warmthermo[2] ;
+
+ gMC->Gspos("PWTI", 1, "PWAR", 0., 0.0, z, 0, "ONLY") ;
+
+ // --- Define cables area and put in it T-supports ----
+ for (ipar=0; ipar<3; ipar++) par[ipar] = *(emcg->GetTCables1HalfSize() + ipar);
+ gMC->Gsvolu("PCA1", "BOX ", idtmed[718], par, 3) ;
+ const Float_t * cbox = emcg->GetTCables1HalfSize() ;
+
+ for (ipar=0; ipar<3; ipar++) par[ipar] = *(emcg->GetTSupport1HalfSize() + ipar);
+ gMC->Gsvolu("PBE1", "BOX ", idtmed[701], par, 3) ;
+ const Float_t * beams = emcg->GetTSupport1HalfSize() ;
+ Int_t isup ;
+ for(isup = 0; isup < emcg->GetNTSuppots(); isup++){
+ Float_t x = -cbox[0] + beams[0] + (2*beams[0]+emcg->GetTSupportDist())*isup ;
+ gMC->Gspos("PBE1", isup, "PCA1", x, 0.0, 0.0, 0, "ONLY") ;
+ }
+
+ z = -warmthermo[2] + cbox[2];
+ gMC->Gspos("PCA1", 1, "PWTI", 0.0, 0.0, z, 0, "ONLY") ;
+
+ for (ipar=0; ipar<3; ipar++) par[ipar] = *(emcg->GetTCables2HalfSize() + ipar);
+ gMC->Gsvolu("PCA2", "BOX ", idtmed[718], par, 3) ;
+ const Float_t * cbox2 = emcg->GetTCables2HalfSize() ;
+
+ for (ipar=0; ipar<3; ipar++) par[ipar] = *(emcg->GetTSupport2HalfSize() + ipar);
+ gMC->Gsvolu("PBE2", "BOX ", idtmed[701], par, 3) ;
+ for(isup = 0; isup < emcg->GetNTSuppots(); isup++){
+ Float_t x = -cbox[0] + beams[0] + (2*beams[0]+emcg->GetTSupportDist())*isup ;
+ gMC->Gspos("PBE2", isup, "PCA2", x, 0.0, 0.0, 0, "ONLY") ;
+ }
+
+ z = -warmthermo[2] + 2*cbox[2] + cbox2[2];
+ gMC->Gspos("PCA2", 1, "PWTI", 0.0, 0.0, z, 0, "ONLY") ;
+
+
// --- Define frame ---
- gMC->Gsvolu("PFRX", "BOX ", idtmed[716], emcg->GetFrameXHalfSize(), 3) ;
- Float_t * posit = emcg->GetFrameXPosition() ;
- gMC->Gspos("PFRX", 1, "PWTI", posit[0], posit[1], posit[2], 0, "ONLY") ;
- gMC->Gspos("PFRX", 2, "PWTI", posit[0], -posit[1], posit[2], 0, "ONLY") ;
-
- gMC->Gsvolu("PFRZ", "BOX ", idtmed[716], emcg->GetFrameZHalfSize(), 3) ;
- posit = emcg->GetFrameZPosition() ;
- gMC->Gspos("PFRZ", 1, "PWTI", posit[0], posit[1], posit[2], 0, "ONLY") ;
- gMC->Gspos("PFRZ", 2, "PWTI", -posit[0], posit[1], posit[2], 0, "ONLY") ;
+ for (ipar=0; ipar<3; ipar++) par[ipar] = *(emcg->GetFrameXHalfSize() + ipar);
+ gMC->Gsvolu("PFRX", "BOX ", idtmed[716], par, 3) ;
+ const Float_t * posit1 = emcg->GetFrameXPosition() ;
+ gMC->Gspos("PFRX", 1, "PWTI", posit1[0], posit1[1], posit1[2], 0, "ONLY") ;
+ gMC->Gspos("PFRX", 2, "PWTI", posit1[0], -posit1[1], posit1[2], 0, "ONLY") ;
+
+ for (ipar=0; ipar<3; ipar++) par[ipar] = *(emcg->GetFrameZHalfSize() + ipar);
+ gMC->Gsvolu("PFRZ", "BOX ", idtmed[716], par, 3) ;
+ const Float_t * posit2 = emcg->GetFrameZPosition() ;
+ gMC->Gspos("PFRZ", 1, "PWTI", posit2[0], posit2[1], posit2[2], 0, "ONLY") ;
+ gMC->Gspos("PFRZ", 2, "PWTI", -posit2[0], posit2[1], posit2[2], 0, "ONLY") ;
// --- Define Fiber Glass support ---
- gMC->Gsvolu("PFG1", "BOX ", idtmed[717], emcg->GetFGupXHalfSize(), 3) ;
- posit = emcg->GetFGupXPosition() ;
- gMC->Gspos("PFG1", 1, "PWTI", posit[0], posit[1], posit[2], 0, "ONLY") ;
- gMC->Gspos("PFG1", 2, "PWTI", posit[0], -posit[1], posit[2], 0, "ONLY") ;
-
- gMC->Gsvolu("PFG2", "BOX ", idtmed[717], emcg->GetFGupZHalfSize(), 3) ;
- posit = emcg->GetFGupZPosition();
- gMC->Gspos("PFG2", 1, "PWTI", posit[0], posit[1], posit[2], 0, "ONLY") ;
- gMC->Gspos("PFG2", 2, "PWTI", -posit[0], posit[1], posit[2], 0, "ONLY") ;
-
- gMC->Gsvolu("PFG3", "BOX ", idtmed[717], emcg->GetFGlowXHalfSize(), 3) ;
- posit = emcg->GetFGlowXPosition() ;
- gMC->Gspos("PFG3", 1, "PWTI", posit[0], posit[1], posit[2], 0, "ONLY") ;
- gMC->Gspos("PFG3", 2, "PWTI", posit[0], -posit[1], posit[2], 0, "ONLY") ;
-
- gMC->Gsvolu("PFG4", "BOX ", idtmed[717], emcg->GetFGlowZHalfSize(), 3) ;
- posit = emcg->GetFGlowZPosition() ;
- gMC->Gspos("PFG4", 1, "PWTI", posit[0], posit[1], posit[2], 0, "ONLY") ;
- gMC->Gspos("PFG4", 2, "PWTI", -posit[0], posit[1], posit[2], 0, "ONLY") ;
-
- // --- Define Air Gap for FEE electronics -----
-
- gMC->Gsvolu("PAFE", "BOX ", idtmed[798], emcg->GetFEEAirHalfSize(), 3) ;
- posit = emcg->GetFEEAirPosition() ;
- gMC->Gspos("PAFE", 1, "PWTI", posit[0], posit[1], posit[2], 0, "ONLY") ;
-
- // Define the EMC module volume and combine Cool and Warm sections
-
- gMC->Gsvolu("PEMC", "TRD1", idtmed[798], emcg->GetEMCParams(), 4) ;
-
- z = - warmcov[2] ;
- gMC->Gspos("PCOL", 1, "PEMC", 0., 0., z, 0, "ONLY") ;
- z = covparams[3] ;
- gMC->Gspos("PWAR", 1, "PEMC", 0., 0., z, 0, "ONLY") ;
-
-
- // Put created EMC geometry into PHOS volume
-
- z = geom->GetCPVBoxSize(1) / 2. ;
- gMC->Gspos("PEMC", 1, "PHOS", 0., 0., z, 0, "ONLY") ;
-
+ for (ipar=0; ipar<3; ipar++) par[ipar] = *(emcg->GetFGupXHalfSize() + ipar);
+ gMC->Gsvolu("PFG1", "BOX ", idtmed[717], par, 3) ;
+ const Float_t * posit3 = emcg->GetFGupXPosition() ;
+ gMC->Gspos("PFG1", 1, "PWTI", posit3[0], posit3[1], posit3[2], 0, "ONLY") ;
+ gMC->Gspos("PFG1", 2, "PWTI", posit3[0], -posit3[1], posit3[2], 0, "ONLY") ;
+
+ for (ipar=0; ipar<3; ipar++) par[ipar] = *(emcg->GetFGupZHalfSize() + ipar);
+ gMC->Gsvolu("PFG2", "BOX ", idtmed[717], par, 3) ;
+ const Float_t * posit4 = emcg->GetFGupZPosition();
+ gMC->Gspos("PFG2", 1, "PWTI", posit4[0], posit4[1], posit4[2], 0, "ONLY") ;
+ gMC->Gspos("PFG2", 2, "PWTI", -posit4[0], posit4[1], posit4[2], 0, "ONLY") ;
+
+ for (ipar=0; ipar<3; ipar++) par[ipar] = *(emcg->GetFGlowXHalfSize() + ipar);
+ gMC->Gsvolu("PFG3", "BOX ", idtmed[717], par, 3) ;
+ const Float_t * posit5 = emcg->GetFGlowXPosition() ;
+ gMC->Gspos("PFG3", 1, "PWTI", posit5[0], posit5[1], posit5[2], 0, "ONLY") ;
+ gMC->Gspos("PFG3", 2, "PWTI", posit5[0], -posit5[1], posit5[2], 0, "ONLY") ;
+
+ for (ipar=0; ipar<3; ipar++) par[ipar] = *(emcg->GetFGlowZHalfSize() + ipar);
+ gMC->Gsvolu("PFG4", "BOX ", idtmed[717], par, 3) ;
+ const Float_t * posit6 = emcg->GetFGlowZPosition() ;
+ gMC->Gspos("PFG4", 1, "PWTI", posit6[0], posit6[1], posit6[2], 0, "ONLY") ;
+ gMC->Gspos("PFG4", 2, "PWTI", -posit6[0], posit6[1], posit6[2], 0, "ONLY") ;
+
+ // --- Define Air Gap for FEE electronics -----
+
+ for (ipar=0; ipar<3; ipar++) par[ipar] = *(emcg->GetFEEAirHalfSize() + ipar);
+ gMC->Gsvolu("PAFE", "BOX ", idtmed[798], par, 3) ;
+ const Float_t * posit7 = emcg->GetFEEAirPosition() ;
+ gMC->Gspos("PAFE", 1, "PWTI", posit7[0], posit7[1], posit7[2], 0, "ONLY") ;
+
+ // Define the EMC module volume and combine Cool and Warm sections
+
+ for (ipar=0; ipar<4; ipar++) par[ipar] = *(emcg->GetEMCParams() + ipar);
+ gMC->Gsvolu("PEMC", "TRD1", idtmed[798], par, 4) ;
+ z = - warmcov[2] ;
+ gMC->Gspos("PCOL", 1, "PEMC", 0., 0., z, 0, "ONLY") ;
+ z = covparams[3] ;
+ gMC->Gspos("PWAR", 1, "PEMC", 0., 0., z, 0, "ONLY") ;
+
+
+ // Put created EMC geometry into PHOS volume
+
+ z = geom->GetCPVBoxSize(1) / 2. ;
+ gMC->Gspos("PEMC", 1, "PHOS", 0., 0., z, 0, "ONLY") ;
+
}
//____________________________________________________________________________
par[2] = geom->GetCPVBoxSize(2) / 2.0 ;
gMC->Gsvolu("PCPV", "BOX ", idtmed[798], par, 3) ;
- Float_t * emcParams = geom->GetEMCAGeometry()->GetEMCParams() ;
+ const Float_t * emcParams = geom->GetEMCAGeometry()->GetEMCParams() ;
z = - emcParams[3] ;
Int_t rotm ;
AliMatrix(rotm, 90.,0., 0., 0., 90., 90.) ;
char im[5] ;
for(Int_t iModule=1; iModule<=nModules; iModule++){
- sprintf(im,"%d",iModule) ;
+ snprintf(im,5,"%d",iModule) ;
modUID = AliGeomManager::LayerToVolUID(idPHOS1,modnum++);
if(strstr(GetTitle(),im)==0 && strcmp(GetTitle(),"IHEP")!=0 && strcmp(GetTitle(),"noCPV")!=0)
continue ;
for(Int_t iModule=1; iModule<=nModules; iModule++){
if(strstr(GetTitle(),"noCPV"))
continue ;
- sprintf(im,"%d",iModule) ;
+ snprintf(im,5,"%d",iModule) ;
modUID = AliGeomManager::LayerToVolUID(idPHOS2,modnum++);
if(strstr(GetTitle(),im)==0 && strcmp(GetTitle(),"IHEP")!=0)
continue ;
for(Int_t module = 1; module <= nModules; ++module){
- sprintf(im,"%d",module) ;
+ snprintf(im,5,"%d",module) ;
if(strstr(GetTitle(),im)==0 && strcmp(GetTitle(),"IHEP")!=0 && strcmp(GetTitle(),"noCPV")!=0)
continue ;
TGeoHMatrix *matTtoL = new TGeoHMatrix(matLtoT.Inverse());
char phosPath[50] ;
- sprintf(phosPath,"/ALIC_1/PHOS_%d",module) ;
+ snprintf(phosPath,50,"/ALIC_1/PHOS_%d",module) ;
if (!gGeoManager->cd(phosPath)){
AliFatal("Geo manager can not find path \n");
}
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff