${runMode} "$@"
;;
esac
+ return 0
}
generateMC()
shift 7
if ! parseConfig ${configFile} "$@"; then return 1; fi
+ #record the working directory provided by the batch system
+ batchWorkingDirectory=${PWD}
+
#use the jobindex only if set and non-negative
if [[ -z ${jobindex} || ${jobindex} -lt 0 ]]; then
[[ -n "${LSB_JOBINDEX}" ]] && jobindex=${LSB_JOBINDEX}
mkdir -p ${runpath}
[[ ! -d ${runpath} ]] && echo "cannot make runpath ${runpath}" && touch ${doneFile} && return 1
cd ${runpath}
+ [[ ! ${PWD} =~ ${runpath} ]] && echo "PWD=$PWD is not the runpath=${runpath}" && touch ${doneFile} && return 1
#runCPassX/C expects the raw chunk to be linked in the run dir
#despite it being accessed by the full path
cd ${simrunpath}
filesMC=(
- "${commonOutputPath}/sim.C"
- "${commonOutputPath}/rec.C"
- "${commonOutputPath}/Config.C"
- "${commonOutputPath}/OCDB_*.root"
+ "${batchWorkingDirectory}/sim.C"
+ "${batchWorkingDirectory}/rec.C"
+ "${batchWorkingDirectory}/Config.C"
+ "${batchWorkingDirectory}/OCDB_*.root"
)
for file in ${filesMC[*]}; do
[[ ! -f ${file##*/} && -f ${file} ]] && echo "copying ${file}" && cp -f ${file} .
alirootInfo > ALICE_ROOT.log
filesCPass0=(
- "${commonOutputPath}/runCPass0.sh"
- "${commonOutputPath}/recCPass0.C"
- "${commonOutputPath}/runCalibTrain.C"
- "${commonOutputPath}/localOCDBaccessConfig.C"
- "${commonOutputPath}/OCDB.root"
+ "${batchWorkingDirectory}/runCPass0.sh"
+ "${batchWorkingDirectory}/recCPass0.C"
+ "${batchWorkingDirectory}/runCalibTrain.C"
+ "${batchWorkingDirectory}/localOCDBaccessConfig.C"
+ "${batchWorkingDirectory}/OCDB.root"
"${ALICE_ROOT}/PWGPP/CalibMacros/CPass0/runCPass0.sh"
"${ALICE_ROOT}/PWGPP/CalibMacros/CPass0/recCPass0.C"
"${ALICE_ROOT}/PWGPP/CalibMacros/CPass0/runCalibTrain.C"
for file in ${filesCPass0[*]}; do
[[ ! -f ${file##*/} && -f ${file} ]] && echo "copying ${file}" && cp -f ${file} .
+ [[ ${file##*/} =~ .*\.sh ]] && chmod +x ${file##*/}
done
echo "this directory (${PWD}) contents:"
extraOpts=("$@")
if ! parseConfig ${configFile} "$@"; then return 1; fi
+ #record the working directory provided by the batch system
+ batchWorkingDirectory=${PWD}
+
#use the jobindex only if set and non-negative
if [[ -z ${jobindex} || ${jobindex} -lt 0 ]]; then
[[ -n "${LSB_JOBINDEX}" ]] && jobindex=${LSB_JOBINDEX}
mkdir -p ${runpath}
[[ ! -d ${runpath} ]] && echo "cannot make runpath ${runpath}" && touch ${doneFile} && return 1
cd ${runpath}
+ [[ ! ${PWD} =~ ${runpath} ]] && echo "PWD=$PWD is not the runpath=${runpath}" && touch ${doneFile} && return 1
#this is needed for runCPass1.sh
ln -s ${infile} ${runpath}/${chunkName}
alirootInfo > ALICE_ROOT.log
filesCPass1=(
- "${commonOutputPath}/runCPass1.sh"
- "${commonOutputPath}/recCPass1.C"
- "${commonOutputPath}/recCPass1_OuterDet.C"
- "${commonOutputPath}/runCalibTrain.C"
- "${commonOutputPath}/QAtrain_duo.C"
- "${commonOutputPath}/localOCDBaccessConfig.C"
+ "${batchWorkingDirectory}/runCPass1.sh"
+ "${batchWorkingDirectory}/recCPass1.C"
+ "${batchWorkingDirectory}/recCPass1_OuterDet.C"
+ "${batchWorkingDirectory}/runCalibTrain.C"
+ "${batchWorkingDirectory}/QAtrain_duo.C"
+ "${batchWorkingDirectory}/localOCDBaccessConfig.C"
"${commonOutputPath}/meta/cpass0.localOCDB.${runNumber}.tgz"
- "${commonOutputPath}/OCDB.root"
+ "${batchWorkingDirectory}/OCDB.root"
"${trustedQAtrainMacro}"
"${ALICE_ROOT}/PWGPP/CalibMacros/CPass1/runCPass1.sh"
"${ALICE_ROOT}/PWGPP/CalibMacros/CPass1/recCPass1.C"
for file in ${filesCPass1[*]}; do
[[ ! -f ${file##*/} && -f ${file} ]] && echo "copying ${file}" && cp -f ${file} .
+ [[ ${file##*/} =~ .*\.sh ]] && chmod +x ${file##*/}
done
echo "this directory (${PWD}) contents:"
shift 5
if ! parseConfig ${configFile} "$@"; then return 1; fi
+ #record the working directory provided by the batch system
+ batchWorkingDirectory=${PWD}
+
[[ -z ${commonOutputPath} ]] && commonOutputPath=${PWD}
doneFile="${commonOutputPath}/meta/merge.cpass0.run${runNumber}.done"
mkdir -p ${runpath}
[[ ! -d ${runpath} ]] && echo "not able to make the runpath ${runpath}" && touch ${doneFile} && return 1
cd ${runpath}
+ [[ ! ${PWD} =~ ${runpath} ]] && echo "PWD=$PWD is not the runpath=${runpath}" && touch ${doneFile} && return 1
logOutputDir=${runpath}
[[ -n ${logToFinalDestination} ]] && logOutputDir=${outputDir}
# copy files in case they are not already there
filesMergeCPass0=(
- "${commonOutputPath}/${calibrationFilesToMerge}"
- "${commonOutputPath}/OCDB.root"
- "${commonOutputPath}/localOCDBaccessConfig.C"
+ "${batchWorkingDirectory}/${calibrationFilesToMerge}"
+ "${batchWorkingDirectory}/OCDB.root"
+ "${batchWorkingDirectory}/localOCDBaccessConfig.C"
"${ALICE_ROOT}/PWGPP/CalibMacros/CPass0/mergeMakeOCDB.byComponent.sh"
"${ALICE_ROOT}/PWGPP/CalibMacros/CPass0/mergeByComponent.C"
"${ALICE_ROOT}/PWGPP/CalibMacros/CPass0/makeOCDB.C"
)
for file in ${filesMergeCPass0[*]}; do
[[ ! -f ${file##*/} && -f ${file} ]] && echo "copying ${file}" && cp -f ${file} .
+ [[ ${file##*/} =~ .*\.sh ]] && chmod +x ${file##*/}
done
sed -i '/.*root .*\.C/ s|\s*,\s*|,|g' *.sh
touch CalibObjects.root
touch ocdb.log
touch merge.log
+ touch dcsTime.root
mkdir -p ./OCDB/TPC/Calib/TimeGain/
mkdir -p ./OCDB/TPC/Calib/TimeDrift/
touch ./OCDB/TPC/Calib/TimeGain/someCalibObject_0-999999_cpass0.root
touch ./OCDB/TPC/Calib/TimeDrift/otherCalibObject_0-999999_cpass0.root
else
./${mergingScript} ${calibrationFilesToMerge} ${runNumber} "local://./OCDB" ${ocdbStorage}
- fi
+ #produce the calib trees for expert QA (dcsTime.root)
+ goMakeLocalOCDBaccessConfig ./OCDB
+ echo aliroot -b -q "${ALICE_ROOT}/PWGPP/TPC/macros/CalibSummary.C(${runNumber},\"${ocdbStorage}\")"
+ aliroot -b -q "${ALICE_ROOT}/PWGPP/TPC/macros/CalibSummary.C(${runNumber},\"${ocdbStorage}\")"
+ fi
+
### produce the output
#tar the produced OCDB for reuse
tar czf ${commonOutputPath}/meta/cpass0.localOCDB.${runNumber}.tgz ./OCDB
- #produce the calib trees for expert QA (dcsTime.root)
- goMakeLocalOCDBaccessConfig ./OCDB
- echo aliroot -b -q "${ALICE_ROOT}/PWGPP/TPC/macros/CalibSummary.C(${runNumber},\"${ocdbStorage}\")"
- aliroot -b -q "${ALICE_ROOT}/PWGPP/TPC/macros/CalibSummary.C(${runNumber},\"${ocdbStorage}\")"
-
/bin/ls
#copy all to output dir
cp -pf --recursive ${runpath}/* ${outputDir}
-
+
if [[ -n ${generateMC} ]]; then
goPrintValues sim ${commonOutputPath}/meta/sim.run${runNumber}.list ${commonOutputPath}/meta/cpass0.job*.run${runNumber}.done
fi
shift 7
if ! parseConfig ${configFile} "$@"; then return 1; fi
+ #record the working directory provided by the batch system
+ batchWorkingDirectory=${PWD}
+
[[ -z ${commonOutputPath} ]] && commonOutputPath=${PWD}
doneFile="${commonOutputPath}/meta/merge.cpass1.run${runNumber}.done"
mkdir -p ${runpath}
[[ ! -d ${runpath} ]] && echo "not able to make the runpath ${runpath}" && touch ${doneFile} && return 1
cd ${runpath}
+ [[ ! ${PWD} =~ ${runpath} ]] && echo "PWD=$PWD is not the runpath=${runpath}" && touch ${doneFile} && return 1
logOutputDir=${runpath}
[[ -n ${logToFinalDestination} ]] && logOutputDir=${outputDir}
# copy files in case they are not already there
filesMergeCPass1=(
- "${commonOutputPath}/${calibrationFilesToMerge}"
- "${commonOutputPath}/${qaFilesToMerge}"
- "${commonOutputPath}/OCDB.root"
- "${commonOutputPath}/localOCDBaccessConfig.C"
- "${commonOutputPath}/meta/cpass0.localOCDB.${runNumber}.tgz"
- "${commonOutputPath}/QAtrain_duo.C"
+ "${batchWorkingDirectory}/${calibrationFilesToMerge}"
+ "${batchWorkingDirectory}/${qaFilesToMerge}"
+ "${batchWorkingDirectory}/OCDB.root"
+ "${batchWorkingDirectory}/localOCDBaccessConfig.C"
+ "${batchWorkingDirectory}/meta/cpass0.localOCDB.${runNumber}.tgz"
+ "${batchWorkingDirectory}/QAtrain_duo.C"
"${ALICE_ROOT}/PWGPP/CalibMacros/CPass1/mergeMakeOCDB.byComponent.sh"
"${ALICE_ROOT}/PWGPP/CalibMacros/CPass1/mergeByComponent.C"
"${ALICE_ROOT}/PWGPP/CalibMacros/CPass1/makeOCDB.C"
)
for file in ${filesMergeCPass1[*]}; do
[[ ! -f ${file##*/} && -f ${file} ]] && echo "copying ${file}" && cp -f ${file} .
+ [[ ${file##*/} =~ .*\.sh ]] && chmod +x ${file##*/}
done
sed -i '/.*root .*\.C/ s|\s*,\s*|,|g' *.sh
echo "${mergingScript} ${calibrationFilesToMerge} ${runNumber} local://./OCDB ${ocdbStorage}"
if [[ -n ${pretend} ]]; then
- touch CalibObjects.root
touch ocdb.log
- touch merge.log
touch cpass1.localOCDB.${runNumber}.tgz
- else
- ./${mergingScript} ${calibrationFilesToMerge} ${runNumber} "local://./OCDB" ${ocdbStorage}
- fi
-
- tar czf ${commonOutputPath}/meta/cpass1.localOCDB.${runNumber}.tgz ./OCDB
-
- #merge QA (and filtered trees)
- [[ -n ${AliAnalysisTaskFilteredTree_fLowPtTrackDownscaligF} ]] && export AliAnalysisTaskFilteredTree_fLowPtTrackDownscaligF
- [[ -n ${AliAnalysisTaskFilteredTree_fLowPtV0DownscaligF} ]] && export AliAnalysisTaskFilteredTree_fLowPtV0DownscaligF
-
- #echo aliroot -l -b -q "merge.C(\"${qaFilesToMerge}\",\"\",kFALSE,\"${qaMergedOutputFileName}\")"
- echo aliroot -b -q "QAtrain_duo.C(\"_barrel\",${runNumber},\"${qaFilesToMerge}\",1,\"${ocdbStorage}\")"
- if [[ -n ${pretend} ]]; then
touch ${qaMergedOutputFileName}
touch merge.log
touch trending.root
touch CalibObjects.root
touch dcsTime.root
touch ${qaMergedOutputFileName}
+ mkdir -p OCDB
else
+ ./${mergingScript} ${calibrationFilesToMerge} ${runNumber} "local://./OCDB" ${ocdbStorage}
+
+ #merge QA (and filtered trees)
+ [[ -n ${AliAnalysisTaskFilteredTree_fLowPtTrackDownscaligF} ]] && export AliAnalysisTaskFilteredTree_fLowPtTrackDownscaligF
+ [[ -n ${AliAnalysisTaskFilteredTree_fLowPtV0DownscaligF} ]] && export AliAnalysisTaskFilteredTree_fLowPtV0DownscaligF
+
+ #echo aliroot -l -b -q "merge.C(\"${qaFilesToMerge}\",\"\",kFALSE,\"${qaMergedOutputFileName}\")"
+ echo aliroot -b -q "QAtrain_duo.C(\"_barrel\",${runNumber},\"${qaFilesToMerge}\",1,\"${ocdbStorage}\")"
#aliroot -l -b -q "merge.C(\"${qaFilesToMerge}\",\"\",kFALSE,\"${qaMergedOutputFileName}\")"
aliroot -b -q "QAtrain_duo.C(\"_barrel\",${runNumber},\"${qaFilesToMerge}\",1,\"${ocdbStorage}\")" > mergeQA.log
mv QAresults_barrel.root ${qaMergedOutputFileName}
#merge filtered trees
echo aliroot -l -b -q "merge.C(\"${qaFilesToMerge}\",\"\",kFALSE,\"${qaMergedOutputFileName}\")"
aliroot -l -b -q "merge.C(\"${filteredFilesToMerge}\",\"\",kFALSE,\"FilterEvents_Trees.root\")"
+
+ #produce the calib trees for expert QA
+ echo aliroot -b -q "${ALICE_ROOT}/PWGPP/TPC/macros/CalibSummary.C(${runNumber},\"${ocdbStorage}\")"
+ aliroot -b -q "${ALICE_ROOT}/PWGPP/TPC/macros/CalibSummary.C(${runNumber},\"${ocdbStorage}\")"
fi
-
- #produce the calib trees for expert QA
- echo aliroot -b -q "${ALICE_ROOT}/PWGPP/TPC/macros/CalibSummary.C(${runNumber},\"${ocdbStorage}\")"
- aliroot -b -q "${ALICE_ROOT}/PWGPP/TPC/macros/CalibSummary.C(${runNumber},\"${ocdbStorage}\")"
+
+ tar czf ${commonOutputPath}/meta/cpass1.localOCDB.${runNumber}.tgz ./OCDB
/bin/ls
configFile=${3-"becnhmark.config"}
shift 3
if ! parseConfig ${configFile} "$@"; then return 1; fi
+
+ #record the working directory provided by the batch system
+ batchWorkingDirectory=${PWD}
[[ ! -f ${inputList} ]] && echo "inputList ${inputList} does not exist!" && return 1
[[ ! -f ${configFile} ]] && echo "configFile ${configFile} does not exist!" && return 1
shift 3
extraOpts=("$@")
if ! parseConfig ${configFile} "${extraOpts[@]}"; then return 1; fi
+
+ #record the working directory provided by the batch system
+ batchWorkingDirectory=${PWD}
[[ -z ${configFile} ]] && configFile="benchmark.config"
[[ ! -f ${configFile} ]] && echo "no config file found (${configFile})" && return 1
- #create the directopry for the metadata
- mkdir meta
-
if [[ ! $(which makeflow &>/dev/null) && -n ${makeflowPath} ]]; then
echo "setting the makflow path from the config: "
echo " export PATH=${makeflowPath}:${PATH}"
export PATH=${makeflowPath}:${PATH}
fi
+ #create the common output dir and the meta dir
+ commonOutputPath=${baseOutputDirectory}/${productionID}
+ if [[ -d ${commonOutputPath} ]]; then
+ echo "output dir ${commonOutputPath} exists!"
+ return 1
+ else
+ mkdir -p ${commonOutputPath}
+ fi
+ mkdir -p ${commonOutputPath}/meta
+
+ self=$(readlink -f "${0}")
+
+ cp ${self} ${commonOutputPath}
+ cp ${configFile} ${commonOutputPath}
+ cp ${inputList} ${commonOutputPath}
+
#submit - use makeflow if available, fall back to old stuff when makeflow not there
if which makeflow; then
- goGenerateMakeflow ${productionID} ${inputFileList} ${configFile} "${extraOpts[@]}" > benchmark.makeflow
+ goGenerateMakeflow ${productionID} ${inputFileList} ${configFile} "${extraOpts[@]}" commonOutputPath=${commonOutputPath} > benchmark.makeflow
makeflow ${makeflowOptions} benchmark.makeflow
cd ../
configFile=${3}
shift 3
extraOpts=("$@")
- if ! parseConfig ${configFile} "${extraOpts[@]}"; then return 1; fi
+ if ! parseConfig ${configFile} "${extraOpts[@]}" &>/dev/null; then return 1; fi
+
+ #extra safety
+ if [[ -z ${commonOutputPath} ]]; then
+ commonOutputPath=${baseOutputDirectory}/${productionID}
+ extraOpts=( "${extraOpts[@]}" "commonOutputPath=${commonOutputPath}" )
+ fi
+
+ #record the working directory provided by the batch system
+ batchWorkingDirectory=${PWD}
[[ -z ${configFile} ]] && configFile="benchmark.config"
[[ ! -f ${configFile} ]] && echo "no config file found (${configFile})" && return 1
- commonOutputPath=${baseOutputDirectory}/${productionID}
-
- self=$(readlink -f "${0}")
- echo "self: $self"
#these files will be made a dependency - will be copied to the working dir of the jobs
declare -a copyFiles
inputFiles=(
declare -A arr_cpass0_profiled_outputs
declare -A listOfRuns
[[ -n ${runNumber} ]] && listOfRuns[${runNumber}]=1
- while read x; do listOfRuns[$(guessRunNumber ${x})]=1; done < ${inputFileList}
+ while read x; do tmpRun=$(guessRunNumber ${x}); [[ -n ${tmpRun} ]] && listOfRuns[${tmpRun}]=1; done < ${inputFileList}
for runNumber in "${!listOfRuns[@]}"; do
[[ -z ${runNumber} ]] && continue
[[ ! ${runNumber} =~ ^[0-9]*[0-9]$ ]] && continue
fi
#CPass0
- arr_cpass0_outputs[${jobindex}]="meta/cpass0.job${jobindex}.run${runNumber}.done"
+ arr_cpass0_outputs[${jobindex}]="${commonOutputPath}/meta/cpass0.job${jobindex}.run${runNumber}.done"
echo "${arr_cpass0_outputs[${jobindex}]} : benchmark.sh ${configFile} ${copyFiles[@]}"
echo -n " ${alirootEnv} ./benchmark.sh CPass0 ${commonOutputPath}/000${runNumber}/cpass0 ${inputFile} ${nEvents} ${currentDefaultOCDB} ${configFile} ${runNumber} ${jobindex}"" "
- for extraOption in "${extraOpts[@]}"; do echo -n \"${extraOption}\"" "; done; echo
+ for extraOption in "${extraOpts[@]}"; do echo -n \'${extraOption}\'" "; done; echo
echo
#CPass1
- arr_cpass1_outputs[${jobindex}]="meta/cpass1.job${jobindex}.run${runNumber}.done"
- echo "${arr_cpass1_outputs[${jobindex}]} : benchmark.sh ${configFile} meta/cpass0.localOCDB.${runNumber}.tgz ${copyFiles[@]}"
+ arr_cpass1_outputs[${jobindex}]="${commonOutputPath}/meta/cpass1.job${jobindex}.run${runNumber}.done"
+ echo "${arr_cpass1_outputs[${jobindex}]} : benchmark.sh ${configFile} ${commonOutputPath}/meta/cpass0.localOCDB.${runNumber}.tgz ${copyFiles[@]}"
echo -n " ${alirootEnv} ./benchmark.sh CPass1 ${commonOutputPath}/000${runNumber}/cpass1 ${inputFile} ${nEvents} ${currentDefaultOCDB} ${configFile} ${runNumber} ${jobindex}"" "
- for extraOption in "${extraOpts[@]}"; do echo -n \"${extraOption}\"" "; done; echo
+ for extraOption in "${extraOpts[@]}"; do echo -n \'${extraOption}\'" "; done; echo
echo
((jobindex++))
done< <(grep "/000${runNumber}/" ${inputFileList})
#CPass0 list of Calib files to merge
- arr_cpass0_calib_list[${runNumber}]="meta/cpass0.calib.run${runNumber}.list"
+ arr_cpass0_calib_list[${runNumber}]="${commonOutputPath}/meta/cpass0.calib.run${runNumber}.list"
echo "${arr_cpass0_calib_list[${runNumber}]} : benchmark.sh ${arr_cpass0_outputs[*]}"
echo " ./benchmark.sh PrintValues calibfile ${arr_cpass0_calib_list[${runNumber}]} ${arr_cpass0_outputs[*]}"
echo
#CPass0 merging
- arr_cpass0_merged[${runNumber}]="meta/merge.cpass0.run${runNumber}.done"
- echo "meta/cpass0.localOCDB.${runNumber}.tgz ${arr_cpass0_merged[${runNumber}]} : benchmark.sh ${configFile} ${arr_cpass0_calib_list[${runNumber}]} ${copyFiles[@]}"
+ arr_cpass0_merged[${runNumber}]="${commonOutputPath}/meta/merge.cpass0.run${runNumber}.done"
+ echo "${commonOutputPath}/meta/cpass0.localOCDB.${runNumber}.tgz ${arr_cpass0_merged[${runNumber}]} : benchmark.sh ${configFile} ${arr_cpass0_calib_list[${runNumber}]} ${copyFiles[@]}"
echo -n " ${alirootEnv} ./benchmark.sh MergeCPass0 ${commonOutputPath}/000${runNumber}/cpass0 ${currentDefaultOCDB} ${configFile} ${runNumber} ${arr_cpass0_calib_list[${runNumber}]}"" "
- for extraOption in "${extraOpts[@]}"; do echo -n \"${extraOption}\"" "; done; echo
+ for extraOption in "${extraOpts[@]}"; do echo -n \'${extraOption}\'" "; done; echo
echo
#CPass1 list of Calib/QA/ESD/filtered files
# the trick with QA is to have the string "Stage.txt" in the file name of the list of directories with QA output to trigger
# the production of the QA trending tree (only then the task->Finish() will be called in QAtrain_duo.C, on the grid
# this corresponds to the last merging stage)
- arr_cpass1_QA_list[${runNumber}]="meta/cpass1.QA.run${runNumber}.lastMergingStage.txt.list"
+ arr_cpass1_QA_list[${runNumber}]="${commonOutputPath}/meta/cpass1.QA.run${runNumber}.lastMergingStage.txt.list"
echo "${arr_cpass1_QA_list[${runNumber}]}: benchmark.sh ${arr_cpass1_outputs[*]}"
echo " ./benchmark.sh PrintValues dir ${arr_cpass1_QA_list[${runNumber}]} ${arr_cpass1_outputs[*]}"
echo
- arr_cpass1_calib_list[${runNumber}]="meta/cpass1.calib.run${runNumber}.list"
+ arr_cpass1_calib_list[${runNumber}]="${commonOutputPath}/meta/cpass1.calib.run${runNumber}.list"
echo "${arr_cpass1_calib_list[${runNumber}]} : benchmark.sh ${arr_cpass1_outputs[*]}"
echo " ./benchmark.sh PrintValues calibfile ${arr_cpass1_calib_list[${runNumber}]} ${arr_cpass1_outputs[*]};"
echo
- arr_cpass1_ESD_list[${runNumber}]="meta/cpass1.ESD.run${runNumber}.list"
+ arr_cpass1_ESD_list[${runNumber}]="${commonOutputPath}/meta/cpass1.ESD.run${runNumber}.list"
echo "${arr_cpass1_ESD_list[${runNumber}]} : benchmark.sh ${arr_cpass1_outputs[*]}"
echo " ./benchmark.sh PrintValues esd ${arr_cpass1_ESD_list[${runNumber}]} ${arr_cpass1_outputs[*]}"
echo
- arr_cpass1_filtered_list[${runNumber}]="meta/cpass1.filtered.run${runNumber}.list"
+ arr_cpass1_filtered_list[${runNumber}]="${commonOutputPath}/meta/cpass1.filtered.run${runNumber}.list"
echo "${arr_cpass1_filtered_list[${runNumber}]} : benchmark.sh ${arr_cpass1_outputs[*]}"
echo " ./benchmark.sh PrintValues filteredTree ${arr_cpass1_filtered_list[${runNumber}]} ${arr_cpass1_outputs[*]}"
echo
#CPass1 merging
- arr_cpass1_merged[${runNumber}]="meta/merge.cpass1.run${runNumber}.done"
- echo "meta/cpass1.localOCDB.${runNumber}.tgz ${arr_cpass1_merged[${runNumber}]} : benchmark.sh ${configFile} ${arr_cpass1_calib_list[${runNumber}]} ${arr_cpass1_QA_list[${runNumber}]} ${copyFiles[@]}"
+ arr_cpass1_merged[${runNumber}]="${commonOutputPath}/meta/merge.cpass1.run${runNumber}.done"
+ echo "${commonOutputPath}/meta/cpass1.localOCDB.${runNumber}.tgz ${arr_cpass1_merged[${runNumber}]} : benchmark.sh ${configFile} ${arr_cpass1_calib_list[${runNumber}]} ${arr_cpass1_QA_list[${runNumber}]} ${copyFiles[@]}"
echo -n " ${alirootEnv} ./benchmark.sh MergeCPass1 ${commonOutputPath}/000${runNumber}/cpass1 ${currentDefaultOCDB} ${configFile} ${runNumber} ${arr_cpass1_calib_list[${runNumber}]} ${arr_cpass1_QA_list[${runNumber}]} ${arr_cpass1_filtered_list[${runNumber}]}"" "
- for extraOption in "${extraOpts[@]}"; do echo -n \"${extraOption}\"" "; done; echo
+ for extraOption in "${extraOpts[@]}"; do echo -n \'${extraOption}\'" "; done; echo
echo
#CPass0 wrapped in a profiling tool (valgrind,....)
- if [[ -n profilingCommand ]]; then
- arr_cpass0_profiled_outputs[${runNumber}]="meta/cpass0.jobProfiled.run${runNumber}.done"
+ if [[ -n ${profilingCommand} ]]; then
+ arr_cpass0_profiled_outputs[${runNumber}]="${commonOutputPath}/meta/cpass0.jobProfiled.run${runNumber}.done"
echo "${arr_cpass0_profiled_outputs[${runNumber}]} : benchmark.sh ${configFile} ${copyFiles[@]}"
echo -n " ${alirootEnv} ./benchmark.sh CPass0 ${commonOutputPath}/000${runNumber}/profiled ${inputFile} ${nEventsProfiling} ${currentDefaultOCDB} ${configFile} ${runNumber} profiling"" "
- for extraOption in "${extraOpts[@]}"; do echo -n \"${extraOption}\"" "; done;
+ for extraOption in "${extraOpts[@]}"; do echo -n \'${extraOption}\'" "; done;
echo "\"useProfilingCommand=${profilingCommand}\""
echo
fi
done #runs
#Summary
- echo "summary.log : benchmark.sh ${configFile} ${arr_cpass1_merged[*]}"
- echo " LOCAL ./benchmark.sh MakeSummary ${configFile}"
+ echo "${commonOutputPath}/summary.log : benchmark.sh ${configFile} ${arr_cpass1_merged[*]}"
+ echo -n " ${alirootEnv} ./benchmark.sh MakeSummary ${configFile}"" "
+ for extraOption in "${extraOpts[@]}"; do echo -n \'${extraOption}\'" "; done; echo
echo
return 0
shift 4
if ! parseConfig ${configFile} ${@}; then return 1; fi
+ #record the working directory provided by the batch system
+ batchWorkingDirectory=${PWD}
+
[[ -f ${alirootSource} && -z ${ALICE_ROOT} ]] && source ${alirootSource}
[[ -z ${logOutputDir} ]] && logOutputDir=${PWD}
olddir=${PWD}
mkdir -p ${outputDir}
cd ${outputDir}
- [[ ! "${PWD}" = "${outputDir}" ]] && echo "cannot make ${outputDir}... exiting" && return 1
+ [[ ! "${PWD}" =~ "${outputDir}" ]] && echo "PWD is not equal to outputDir=${outputDir}" && cd ${olddir} && return 1
- echo ${ALICE_ROOT}/PWGPP/QA/scripts/runQA.sh inputList=${mergedQAfileList}
${ALICE_ROOT}/PWGPP/QA/scripts/runQA.sh inputList="${mergedQAfileList}" inputListHighPtTrees="${filteringList}"
cd ${olddir}
for ((x=${dirDepth}-1;x>=0;x--)); do
local field=${path[${x}]}
field=${field/run/000}
- [[ ${field} =~ ^000[0-9][0-9][0-9][0-9][0-9][0-9]$ ]] && runNumber=${field#000} && break
+ [[ ${field} =~ [0-9][0-9][0-9][0-9][0-9][0-9]$ ]] && runNumber=${field#000} && break
done
echo ${runNumber}
return 0
'AliFatal'
'core dumped'
'\.C.*error:.*\.h: No such file'
+ 'line.*Aborted'
)
warningConditions=(
if [[ ${validationStatus} -eq 0 ]]; then
#in pretend mode randomly report an error in rec.log some cases
if [[ -n ${pretend} && "${log}" == "rec.log" ]]; then
- [[ $(( ${RANDOM}%2 )) -ge 1 ]] && echo "${finallog} BAD random error" || echo "${finallog} OK"
+ #[[ $(( ${RANDOM}%2 )) -ge 1 ]] && echo "${finallog} BAD random error" || echo "${finallog} OK"
+ echo "${finallog} OK"
else
echo "${finallog} OK"
fi
esdFileName=${12-"AliESDs_Barrel.root"}
shift 12
if ! parseConfig ${configFile} "$@"; then return 1; fi
+
+ #record the working directory provided by the batch system
+ batchWorkingDirectory=${PWD}
+
commonOutputPath=${PWD}
doneFile=${commonOutputPath}/meta/filtering.cpass1.run${runNumber}.done
mkdir -p ${runpath}
cd ${runpath}
+ [[ ! ${PWD} =~ ${runpath} ]] && echo "PWD=$PWD is not the runpath=${runpath}" && touch ${doneFile} && return 1
cat > filtering.log << EOF
goMakeFilteredTrees config:
shift 3
extraOpts=("$@")
if ! parseConfig ${configFile} "${extraOpts[@]}"; then return 1; fi
+
+ #record the working directory provided by the batch system
+ batchWorkingDirectory=${PWD}
#redirect all output to submit.log
echo "redirecting all output to ${PWD}/submit_${productionID//"/"/_}.log"
# summary_pass0.tree
# summary_pass1.tree
#
-
+
[[ ! -f cpass0.dcsTree.list ]] && echo "no cpass0.dcsTree.list" && return 1
[[ ! -f cpass1.dcsTree.list ]] && echo "no cpass1.dcsTree.list" && return 1
[[ ! -f trending.root ]] && echo "no trending.root" && return 1
//
// Calibration values dump
//
+ //Printf("MakeTreeFromList cpass0.dcsTree.list");
AliXRDPROOFtoolkit::MakeTreeFromList("Calib.TPC.CPass0.root", "dcs","dcs","cpass0.dcsTree.list",1);
+ //Printf("MakeTreeFromList cpass1.dcsTree.list");
AliXRDPROOFtoolkit::MakeTreeFromList("Calib.TPC.CPass1.root", "dcs","dcs","cpass1.dcsTree.list",1);
//
// Calibration status dump
//
TFile *fprod = TFile::Open("fproduction.root","recreate");
TTree tree0, tree1;
+ //Printf("reading summary_pass0.tree");
tree0.ReadFile("summary_pass0.tree");
+ //Printf("reading summary_pass1.tree");
tree1.ReadFile("summary_pass1.tree");
tree0.Write("CPass0");
tree1.Write("CPass1");
stringSetup+="1#CPass0#runnumber#CPass0#fproduction.root+"; //
stringSetup+="1#CPass1#runnumber#CPass1#fproduction.root+"; //
//
+ //Printf("stringSetup: %s", stringSetup.Data());
AliXRDPROOFtoolkit::JoinTreesIndex("outAll.root","joinAll","run",stringSetup.Data(), 1);
}
EOF
extraOpts=("$@")
if ! parseConfig ${configFile} "${extraOpts[@]}"; then return 1; fi
+ configFile=$(readlink -f ${configFile})
+
+ #record the working directory provided by the batch system
+ batchWorkingDirectory=${PWD}
+
[[ -f ${alirootSource} && -z ${ALICE_ROOT} ]] && source ${alirootSource}
- exec &> >(tee ${log})
-
[[ ! -f ${configFile} ]] && echo "no config file ${configFile}!" && return
[[ -z ${commonOutputPath} ]] && commonOutputPath=${PWD}
+ #copy some useful stuff
+ #and go to the commonOutputPath
+ cp ${configFile} ${commonOutputPath}
+ cd ${commonOutputPath}
+
+ exec &> >(tee ${log})
+
#summarize the global stuff
echo "env script: ${alirootSource} ${alirootEnv}"
echo "\$ALICE_ROOT=${ALICE_ROOT}"
goPrintValues trendingfile trending.list ${commonOutputPath}/meta/merge.cpass1.run*.done &>/dev/null
rm -f filtering.list
goPrintValues filteredTree filtering.list ${commonOutputPath}/meta/merge.cpass1.run*.done &>/dev/null
- #/bin/ls ${commonOutputPath}/*/cpass0/dcs* > cpass0.dcsTree.list
rm -f cpass0.dcsTree.list
goPrintValues dcsTree cpass0.dcsTree.list ${commonOutputPath}/meta/merge.cpass0.run*.done &>/dev/null
- #/bin/ls ${commonOutputPath}/*/cpass1/dcs* > cpass1.dcsTree.list
rm -f cpass1.dcsTree.list
goPrintValues dcsTree cpass1.dcsTree.list ${commonOutputPath}/meta/merge.cpass1.run*.done &>/dev/null
goMakeSummaryTree ${commonOutputPath} 0
goMakeSummaryTree ${commonOutputPath} 1
- goCreateQAplots "qa.list" "${productionID}" "QAplots" "${configFile}" "${extraOpts[@]}" filteringList="filtering.list" &>createQAplots.log
+ goCreateQAplots "${PWD}/qa.list" "${productionID}" "QAplots" "${configFile}" "${extraOpts[@]}" filteringList="${PWD}/filtering.list" &>createQAplots.log
#make a merged summary tree out of the QA trending, dcs trees and log summary trees
+ echo goMakeMergedSummaryTree PWD=$PWD
goMakeMergedSummaryTree
#if set, email the summary
#makeflowOptions="-T wq -N alice -d all -C ali-copilot.cern.ch:9097"
#makeflowOptions="-T wq -N alice -C ali-copilot.cern.ch:9097"
makeflowOptions=""
- batchCommand="/usr/bin/qsub"
+ #batchCommand="/usr/bin/qsub"
batchFlags="-b y -cwd -l h_rt=24:0:0,h_rss=4G "
baseOutputDirectory="$PWD/output"
#alirootEnv="/cvmfs/alice.cern.ch/bin/alienv setenv AliRoot/v5-04-34-AN -c"
echo "config file ${configFile} not found!, skipping..."
fi
+ unset encodedSpaces
+ for opt in "${args[@]}"; do
+ [[ "${opt}" =~ encodedSpaces=.* ]] && encodedSpaces=1 && break
+ done
+
#then, parse the options as they override the options from file
for opt in "${args[@]}"; do
if [[ ! "${opt}" =~ .*=.* ]]; then
fi
local var="${opt%%=*}"
local value="${opt#*=}"
+ [[ -n ${encodedSpaces} ]] && value=$(decSpaces "${value}")
echo "${var} = ${value}"
export ${var}="${value}"
done
return 0
}
+#these functions encode strings to and from a space-less form
+#use when spaces are not well handled (e.g. in arguments to
+#commands in makeflow files, etc.
+encSpaces()(a="${1//,/\\,}";echo "${a// /,}")
+decSpaces()(a="${1//\\,/\\ }";b="${a//,/ }";echo "${b//\\ /,}")
+
main "$@"