* provided "as is" without express or implied warranty. *
**************************************************************************/
-/* $Id$ */
-
-////////////////////////////////////////////////
-// Manager and hits classes for set:RICH //
-////////////////////////////////////////////////
-
-#include <Riostream.h>
-#include <strings.h>
-
#include <TArrayF.h>
+#include <TGeometry.h>
#include <TBRIK.h>
-#include <TCanvas.h>
-#include <TF1.h>
+#include <TTUBE.h>
#include <TFile.h>
-#include <TGeometry.h>
-#include <TH1.h>
-#include <TH2.h>
#include <TNode.h>
#include <TObjArray.h>
-#include <TObject.h>
-#include <TParticle.h>
-#include <TPDGCode.h>
-#include <TRandom.h>
-#include <TStyle.h>
-#include <TTUBE.h>
-#include <TTree.h>
-#include <TVector.h>
-#include "AliConst.h"
-#include "AliMagF.h"
-#include "AliPoints.h"
+#include <AliMagF.h>
#include "AliRICH.h"
-#include "AliRICHCerenkov.h"
-#include "AliRICHClusterFinder.h"
-#include "AliRICHDigit.h"
-#include "AliRICHDigitizer.h"
-#include "AliRICHHit.h"
-#include "AliRICHHitMapA1.h"
-#include "AliRICHMerger.h"
-#include "AliRICHRawCluster.h"
-#include "AliRICHRecHit1D.h"
-#include "AliRICHRecHit3D.h"
-#include "AliRICHSDigit.h"
-#include "AliRICHSegmentationV0.h"
-#include "AliRICHTransientDigit.h"
-#include "AliRun.h"
-#include "AliRunDigitizer.h"
-#include "AliSegmentation.h"
-
-
-static Int_t sMaxIterPad=0; // Static variables for the pad-hit iterator routines
-static Int_t sCurIterPad=0;
+#include "AliRICHParam.h"
+#include <AliRun.h>
+#include <AliRunDigitizer.h>
+#include "AliMC.h"
+#include <TVirtualMC.h>
-ClassImp(AliRICH)
-
-//___________________________________________
+ClassImp(AliRICHhit)
+//__________________________________________________________________________________________________
+void AliRICHhit::Print(Option_t*)const
+{
+ Info("","chamber=%2i, PID=%9i, TID=%6i, eloss=%8.3f eV",fChamber,fPid,fTrack,fEloss*1e9);
+}
+//__________________________________________________________________________________________________
+ClassImp(AliRICHdigit)
+//__________________________________________________________________________________________________
+void AliRICHdigit::Print(Option_t*)const
+{
+ Info("","ID=%6i, chamber=%2i, PadX=%3i, PadY=%3i, Q=%6.2f, TID1=%5i, TID2=%5i, TID3=%5i",
+ Id(),fChamber,fPadX,fPadY,fQdc,fTracks[0],fTracks[1],fTracks[2]);
+}
+//__________________________________________________________________________________________________
+ClassImp(AliRICHcluster)
+//__________________________________________________________________________________________________
+void AliRICHcluster::Print(Option_t*)const
+{
+ Info("","chamber=%2i,size=%3i,dim=%5i,x=%6.3f,y=%6.3f,Q=%4i,status=%i",
+ fChamber,fSize,fDimXY,fX,fY,fQdc,fStatus);
+}
+//__________________________________________________________________________________________________
+ClassImp(AliRICH)
+//__________________________________________________________________________________________________
// RICH manager class
-//Begin_Html
+//BEGIN_HTML
/*
<img src="gif/alirich.gif">
*/
-//End_Html
-
+//END_HTML
+//__________________________________________________________________________________________________
AliRICH::AliRICH()
-{
-// Default ctor should not contain any new operators
-
- fIshunt = 0;
- fHits = 0;
- fSDigits = 0;
- fNSDigits = 0;
- fNcerenkovs = 0;
- fDchambers = 0;
- fRecHits1D = 0;
- fRecHits3D = 0;
- fRawClusters = 0;
- fChambers = 0;
- fCerenkovs = 0;
- for (Int_t i=0; i<7; i++){
- fNdch[i] = 0;
- fNrawch[i] = 0;
- fNrechits1D[i] = 0;
- fNrechits3D[i] = 0;
- }
-
- fFileName = 0;
- fMerger = 0;
+ :AliDetector()
+{//Default ctor should not contain any new operators
+ fpParam =0;
+ fChambers =0;
+//AliDetector ctor deals with Hits and Digits
+ fSdigits =0; fNsdigits =0;
+ fDigitsNew =0; for(int i=0;i<kNCH;i++) fNdigitsNew[i] =0;
+ fClusters =0; for(int i=0;i<kNCH;i++) fNclusters[i]=0;
+
+ fCerenkovs =0; fNcerenkovs =0;
+ fSpecials =0; fNspecials =0;
+ fDchambers =0; for(int i=0;i<kNCH;i++) fNdch[i]=0;
+ fRawClusters=0; for(int i=0;i<kNCH;i++) fNrawch[i]=0;
+ fCkovNumber=fFreonProd=0;
}//AliRICH::AliRICH()
-
+//__________________________________________________________________________________________________
AliRICH::AliRICH(const char *name, const char *title)
- : AliDetector(name,title)
-{
-// Named ctor
- cout<<ClassName()<<"::named ctor(sName,sTitle)>\n"; // no way to control it as ctor is called before call to SetDebugXXXX()
-
- fHits = new TClonesArray("AliRICHHit",1000 );
- gAlice->AddHitList(fHits);
- fSDigits = new TClonesArray("AliRICHSDigit",100000);
- fCerenkovs = new TClonesArray("AliRICHCerenkov",1000);
- gAlice->AddHitList(fCerenkovs);
- fNSDigits = 0;
- fNcerenkovs = 0;
- fIshunt = 0;
-
- //fNdch = new Int_t[kNCH];
-
- fDchambers = new TObjArray(kNCH);
-
- fRecHits1D = new TObjArray(kNCH);
- fRecHits3D = new TObjArray(kNCH);
-
- Int_t i;
-
- for (i=0; i<kNCH ;i++) {
- //PH (*fDchambers)[i] = new TClonesArray("AliRICHDigit",10000);
- fDchambers->AddAt(new TClonesArray("AliRICHDigit",10000), i);
- fNdch[i]=0;
- }
-
- //fNrawch = new Int_t[kNCH];
-
- fRawClusters = new TObjArray(kNCH);
- //printf("Created fRwClusters with adress:%p",fRawClusters);
-
- for (i=0; i<kNCH ;i++) {
- //PH (*fRawClusters)[i] = new TClonesArray("AliRICHRawCluster",10000);
- fRawClusters->AddAt(new TClonesArray("AliRICHRawCluster",10000), i);
- fNrawch[i]=0;
- }
-
- //fNrechits = new Int_t[kNCH];
-
- for (i=0; i<kNCH ;i++) {
- //PH (*fRecHits1D)[i] = new TClonesArray("AliRICHRecHit1D",1000);
- fRecHits1D->AddAt(new TClonesArray("AliRICHRecHit1D",1000), i);
- }
- for (i=0; i<kNCH ;i++) {
- //PH (*fRecHits3D)[i] = new TClonesArray("AliRICHRecHit3D",1000);
- fRecHits3D->AddAt(new TClonesArray("AliRICHRecHit3D",1000), i);
- }
- //printf("Created fRecHits with adress:%p",fRecHits);
-
-
- SetMarkerColor(kRed);
-
- /*fChambers = new TObjArray(kNCH);
- for (i=0; i<kNCH; i++)
- (*fChambers)[i] = new AliRICHChamber();*/
-
- fFileName = 0;
- fMerger = 0;
-}
-
-AliRICH::AliRICH(const AliRICH& RICH)
-{
-// Copy ctor
-}
-
-
+ :AliDetector(name,title)
+{//Named ctor
+ if(GetDebug())Info("named ctor","Start.");
+ fpParam = new AliRICHParam;
+ fChambers = 0; CreateChambers();
+//AliDetector ctor deals with Hits and Digits (reset them to 0, does not create them)
+ fHits= 0; CreateHits(); gAlice->GetMCApp()->AddHitList(fHits);
+ fSdigits= 0;
+ fDigitsNew= 0;
+ fClusters= 0;
+
+ fCerenkovs= 0; CreateCerenkovsOld(); gAlice->GetMCApp()->AddHitList(fCerenkovs);
+ fSpecials= 0; CreateSpecialsOld();
+ fDchambers= 0;
+ fRawClusters=0;
+
+ fCkovNumber=fFreonProd=0;
+ if(GetDebug())Info("named ctor","Stop.");
+}//AliRICH::AliRICH(const char *name, const char *title)
+//__________________________________________________________________________________________________
AliRICH::~AliRICH()
-{
-// Dtor of RICH manager class
- if(IsDebugStart()) cout<<ClassName()<<"::default dtor()>\n";
-
- fIshunt = 0;
- delete fHits;
- delete fSDigits;
- delete fCerenkovs;
-
- //PH Delete TObjArrays
- if (fChambers) {
- fChambers->Delete();
- delete fChambers;
- }
- if (fDchambers) {
- fDchambers->Delete();
- delete fDchambers;
- }
- if (fRawClusters) {
- fRawClusters->Delete();
- delete fRawClusters;
- }
- if (fRecHits1D) {
- fRecHits1D->Delete();
- delete fRecHits1D;
- }
- if (fRecHits3D) {
- fRecHits3D->Delete();
- delete fRecHits3D;
- }
-
-}
-
-
-//_____________________________________________________________________________
-Int_t AliRICH::Hits2SDigits(Float_t xhit,Float_t yhit,Float_t eloss, Int_t idvol, ResponseType res)
-{
-// Calls the charge disintegration method of the current chamber and adds
-// the simulated cluster to the root tree
- if(IsDebugHit()||IsDebugDigit()) cout<<ClassName()<<"::Hits2SDigits(...)>\n";
-
- Int_t clhits[5];
- Float_t newclust[4][500];
- Int_t nnew;
-
-//
-// Integrated pulse height on chamber
-
- clhits[0]=fNhits+1;
-
- ((AliRICHChamber*)fChambers->At(idvol))->DisIntegration(eloss, xhit, yhit, nnew, newclust, res);
- Int_t ic=0;
-
-//
-// Add new clusters
- for (Int_t i=0; i<nnew; i++) {
- if (Int_t(newclust[0][i]) > 0) {
- ic++;
-// Cluster Charge
- clhits[1] = Int_t(newclust[0][i]);
-// Pad: ix
- clhits[2] = Int_t(newclust[1][i]);
-// Pad: iy
- clhits[3] = Int_t(newclust[2][i]);
-// Pad: chamber sector
- clhits[4] = Int_t(newclust[3][i]);
+{//dtor
+ if(GetDebug()) Info("dtor","Start.");
- //printf(" %d %d %d %d %d\n", clhits[0], clhits[1], clhits[2], clhits[3], clhits[4]);
-
- AddSDigit(clhits);
- }
- }
+ if(fpParam) delete fpParam;
+ if(fChambers) delete fChambers;
+
+ if(fHits) delete fHits;
+ if(fSdigits) delete fSdigits;
+ if(fDigits) delete fDigits;
+ if(fDigitsNew) {fDigitsNew->Delete(); delete fDigitsNew;}
+ if(fClusters) {fClusters->Delete(); delete fClusters;}
+
+ if(fCerenkovs) delete fCerenkovs;
+ if(fSpecials) delete fSpecials;
+ if(fDchambers) {fDchambers->Delete(); delete fDchambers;}
+ if(fRawClusters) {fRawClusters->Delete(); delete fRawClusters;}
+ if(GetDebug()) Info("dtor","Stop.");
+}//AliRICH::~AliRICH()
+//__________________________________________________________________________________________________
+void AliRICH::Hits2SDigits()
+{//Create a list of sdigits corresponding to list of hits. Every hit generates one or more sdigits.
+ if(GetDebug()) Info("Hit2SDigits","Start.");
+ GetLoader()->LoadHits();
+
+ for(Int_t iEventN=0;iEventN<gAlice->GetEventsPerRun();iEventN++){//events loop
+ gAlice->GetRunLoader()->GetEvent(iEventN);
- if (gAlice->TreeS()){
- gAlice->TreeS()->Fill();
- gAlice->TreeS()->Write(0,TObject::kOverwrite);
- //printf("Filled SDigits...\n");
- }
+ if(!GetLoader()->TreeS()) GetLoader()->MakeTree("S");
+ MakeBranch("S");
- return nnew;
-}//Int_t AliRICH::Hits2SDigits(Float_t xhit,Float_t yhit,Float_t eloss, Int_t idvol, ResponseType res)
-
-void AliRICH::Hits2SDigits()
-{
-// Dummy: sdigits are created during transport.
-// Called from alirun.
- if(IsDebugHit()||IsDebugDigit()) cout<<ClassName()<<"::Hits2SDigits()>\n";
-
-
- int nparticles = gAlice->GetNtrack();
- cout << "Particles (RICH):" <<nparticles<<endl;
- if (nparticles > 0) printf("SDigits were already generated.\n");
-
-}
-
-//___________________________________________
-void AliRICH::SDigits2Digits(Int_t nev, Int_t flag)
-{
-// Generate digits.
-// Called from macro. Multiple events, more functionality.
- if(IsDebugDigit()) cout<<ClassName()<<"::SDigits2Digits()>\n";
+ ResetHits(); ResetSDigits();
+ for(Int_t iPrimN=0;iPrimN<GetLoader()->TreeH()->GetEntries();iPrimN++){//prims loop
+ GetLoader()->TreeH()->GetEntry(iPrimN);
+ for(Int_t iHitN=0;iHitN<Hits()->GetEntries();iHitN++){//hits loop
+ AliRICHhit *pHit=(AliRICHhit*)Hits()->At(iHitN);
+
+ TVector3 globX3(pHit->X(),pHit->Y(),pHit->Z());
+ TVector3 locX3=C(pHit->C())->Glob2Loc(globX3);
+
+ Int_t sector;
+ Int_t iTotQdc=Param()->Loc2TotQdc(locX3,pHit->Eloss(),pHit->Pid(),sector);
+
+ Int_t iPadXmin,iPadXmax,iPadYmin,iPadYmax;
+ AliRICHParam::Loc2Area(locX3,iPadXmin,iPadYmin,iPadXmax,iPadYmax);
+ for(Int_t iPadY=iPadYmin;iPadY<=iPadYmax;iPadY++)
+ for(Int_t iPadX=iPadXmin;iPadX<=iPadXmax;iPadX++){
+ Double_t padQdc=iTotQdc*Param()->Loc2PadFrac(locX3,iPadX,iPadY);
+ if(padQdc>0.1) AddSDigit(pHit->C(),iPadX,iPadY,padQdc,pHit->GetTrack());
+ }
+ }//specials loop
+ }//prims loop
+ GetLoader()->TreeS()->Fill();
+ GetLoader()->WriteSDigits("OVERWRITE");
+ if(GetDebug()) Info("Hit2SDigits","Event %i processed.",iEventN);
+ }//events loop
+ GetLoader()->UnloadHits(); GetLoader()->UnloadSDigits();
+ ResetHits(); ResetSDigits();
+ if(GetDebug()) Info("Hit2SDigits","Stop.");
+}//void AliRICH::Hits2SDigits()
+//__________________________________________________________________________________________________
+void AliRICH::SDigits2Digits()
+{//Generate digits from sdigits.
+ if(GetDebug()) Info("SDigits2Digits","Start.");
- //AliRICHChamber* iChamber;
+ GetLoader()->LoadSDigits();
- //printf("Generating tresholds...\n");
+ for(Int_t iEventN=0;iEventN<gAlice->GetEventsPerRun();iEventN++){//events loop
+ gAlice->GetRunLoader()->GetEvent(iEventN);
+
+ if(!GetLoader()->TreeD()) GetLoader()->MakeTree("D"); MakeBranch("D"); //create TreeD with RICH branches
+ ResetSDigits();ResetDigitsOld();//reset lists of sdigits and digits
+ GetLoader()->TreeS()->GetEntry(0);
+ SDigits()->Sort();
- //for(Int_t i=0;i<7;i++) {
- //iChamber = &(Chamber(i));
- //iChamber->GenerateTresholds();
- //}
+ Int_t chamber,x,y,tr[3],id;
+ chamber=x=y=tr[0]=tr[1]=tr[2]=id=kBad;
+ Double_t q=kBad;
+ Int_t iNdigitsPerPad=kBad;//how many sdigits for a given pad
+
+ for(Int_t i=0;i<SDigits()->GetEntries();i++){//sdigits loop (sorted)
+ AliRICHdigit *pSdig=(AliRICHdigit*)SDigits()->At(i);
+ if(pSdig->Id()==id){//still the same pad
+ iNdigitsPerPad++;
+ q+=pSdig->Q();
+ if(iNdigitsPerPad<=3)
+ tr[iNdigitsPerPad-1]=pSdig->T(0);
+ else
+ Info("","More then 3 sdigits for the given pad");
+ }else{//new pad, add the pevious one
+ if(id!=kBad) AddDigit(chamber,x,y,(Int_t)q,tr[0],tr[1],tr[2]);//ch-xpad-ypad-qdc-tr1-2-3
+ chamber=pSdig->C();x=pSdig->X();y=pSdig->Y();q=pSdig->Q();tr[0]=pSdig->T(0);id=pSdig->Id();
+ iNdigitsPerPad=1;tr[1]=tr[2]=kBad;
+ }
+ }//sdigits loop (sorted)
- //int nparticles = gAlice->GetNtrack();
- //cout << "Particles (RICH):" <<nparticles<<endl;
- //if (nparticles <= 0) return;
- //if (!fMerger) {
- //fMerger = new AliRICHMerger();
- //}
-
-
- //fMerger->Init();
- //fMerger->Digitise(nev,flag);
-
- AliRunDigitizer * manager = new AliRunDigitizer(1,1);
- manager->SetInputStream(0,"galice.root");
- //AliRICHDigitizer *dRICH = new AliRICHDigitizer(manager);
- manager->Exec("deb");
-
-}
-//___________________________________________
-void AliRICH::SDigits2Digits()
-{
- SDigits2Digits(0,0);
-}
-//___________________________________________
+ if(SDigits()->GetEntries())AddDigit(chamber,x,y,(Int_t)q,tr[0],tr[1],tr[2]);//add the last digit
+
+
+ GetLoader()->TreeD()->Fill();
+ GetLoader()->WriteDigits("OVERWRITE");
+ if(GetDebug()) Info("SDigits2Digits","Event %i processed.",iEventN);
+ }//events loop
+ GetLoader()->UnloadSDigits(); GetLoader()->UnloadDigits();
+ ResetSDigits(); ResetDigitsOld();
+ if(GetDebug()) Info("SDigits2Digits","Stop.");
+}//void AliRICH::SDigits2Digits()
+//__________________________________________________________________________________________________
void AliRICH::Digits2Reco()
-{
-// Generate clusters
-// Called from alirun, single event only.
- if(IsDebugDigit()||IsDebugReco()) cout<<ClassName()<<"::Digits2Reco()>\n";
-
-
- int nparticles = gAlice->GetNtrack();
- cout << "Particles (RICH):" <<nparticles<<endl;
- if (nparticles > 0) FindClusters(0,0);
-
-}
-
-void AliRICH::AddHit(Int_t track, Int_t *vol, Float_t *hits)
-{
-// Adds the current hit to the RICH hits list
- if(IsDebugHit()) cout<<ClassName()<<"::AddHit(...)>\n";
-
- TClonesArray &lhits = *fHits;
- new(lhits[fNhits++]) AliRICHHit(fIshunt,track,vol,hits);
-}
-
-void AliRICH::AddCerenkov(Int_t track, Int_t *vol, Float_t *cerenkovs)
-{
-// Adds a RICH cerenkov hit to the Cerenkov Hits list
- if(IsDebugHit()) cout<<ClassName()<<"::AddCerenkov()>\n";
-
- TClonesArray &lcerenkovs = *fCerenkovs;
- new(lcerenkovs[fNcerenkovs++]) AliRICHCerenkov(fIshunt,track,vol,cerenkovs);
-}
-
-void AliRICH::AddSDigit(Int_t *aSDigit)
-{
-// Adds the current S digit to the RICH list of S digits
- if(IsDebugDigit()) cout<<ClassName()<<"::AddSDigit()>\n";
-
- TClonesArray &lSDigits = *fSDigits;
- new(lSDigits[fNSDigits++]) AliRICHSDigit(aSDigit);
-}
-
-
-void AliRICH::AddDigits(Int_t id, Int_t *tracks, Int_t *charges, Int_t *digits)
-{
-// Add a RICH digit to the list
- if(IsDebugDigit()) cout<<ClassName()<<"::AddDigit()>\n";
-
- TClonesArray &ldigits = *((TClonesArray*)fDchambers->At(id));
- new(ldigits[fNdch[id]++]) AliRICHDigit(tracks,charges,digits);
-}
-
-void AliRICH::AddRawCluster(Int_t id, const AliRICHRawCluster& c)
-{
-// Add a RICH digit to the list
-
- if(IsDebugStart())
- cout<<ClassName()<<"::AddRawCluster()>\n";
-
- //PH TClonesArray &lrawcl = *((TClonesArray*)(*fRawClusters)[id]);
- TClonesArray &lrawcl = *((TClonesArray*)fRawClusters->At(id));
- new(lrawcl[fNrawch[id]++]) AliRICHRawCluster(c);
-}
-
-//_____________________________________________________________________________
-void AliRICH::AddRecHit1D(Int_t id, Float_t *rechit, Float_t *photons, Int_t *padsx, Int_t* padsy)
-{
+{//Generate clusters from digits then generate recos from clusters or digits
+ if(GetDebug()) Info("Digits2reco","Start.");
+
+}//void AliRICH::Digits2Reco()
+//__________________________________________________________________________________________________
+void AliRICH::BuildGeometry()
+{//Builds a TNode geometry for event display
+ if(GetDebug())Info("BuildGeometry","Start.");
- //
- // Add a RICH reconstructed hit to the list
- //
-
- //PH TClonesArray &lrec1D = *((TClonesArray*)(*fRecHits1D)[id]);
- TClonesArray &lrec1D = *((TClonesArray*)fRecHits1D->At(id));
- new(lrec1D[fNrechits1D[id]++]) AliRICHRecHit1D(id,rechit,photons,padsx,padsy);
-}
-
-//_____________________________________________________________________________
-void AliRICH::AddRecHit3D(Int_t id, Float_t *rechit, Float_t omega, Float_t theta, Float_t phi)
-{
-// Add a RICH reconstructed hit to the list
-
- TClonesArray &lrec3D = *((TClonesArray*)fRecHits3D->At(id));
- new(lrec3D[fNrechits3D[id]++]) AliRICHRecHit3D(id,rechit,omega,theta,phi);
-}
-
-//___________________________________________
-void AliRICH::BuildGeometry()
-
-{
+ TNode *node, *subnode, *top;
+ top=gAlice->GetGeometry()->GetNode("alice");
- //
- // Builds a TNode geometry for event display
- //
- TNode *node, *subnode, *top;
-
- const int kColorRICH = kRed;
- //
- top=gAlice->GetGeometry()->GetNode("alice");
-
- AliRICH *pRICH = (AliRICH *) gAlice->GetDetector("RICH");
- AliRICHSegmentationV0* segmentation;
- AliRICHChamber* iChamber;
- AliRICHGeometry* geometry;
-
- iChamber = &(pRICH->Chamber(0));
- segmentation=(AliRICHSegmentationV0*) iChamber->GetSegmentationModel();
- geometry=iChamber->GetGeometryModel();
-
- new TBRIK("S_RICH","S_RICH","void",71.09999,11.5,73.15);
+ new TBRIK("S_RICH","S_RICH","void",71.09999,11.5,73.15);
- Float_t padplane_width = segmentation->GetPadPlaneWidth();
- Float_t padplane_length = segmentation->GetPadPlaneLength();
-
- //printf("\n\n\n\n\n In BuildGeometry() npx: %d, npy: %d, dpx: %f, dpy:%f\n\n\n\n\n\n",segmentation->Npx(),segmentation->Npy(),segmentation->Dpx(),segmentation->Dpy());
-
- new TBRIK("PHOTO","PHOTO","void", padplane_width/2,.1,padplane_length/2);
-
- //printf("\n\n\n\n\n Padplane w: %f l: %f \n\n\n\n\n", padplane_width/2,padplane_length/2);
- //printf("\n\n\n\n\n Padplane w: %f l: %f \n\n\n\n\n", segmentation->GetPadPlaneWidth(), segmentation->GetPadPlaneLength());
+ Float_t wid=Param()->SectorSizeX();
+ Float_t len=Param()->SectorSizeY();
+ new TBRIK("PHOTO","PHOTO","void",wid/2,0.1,len/2);
- Float_t offset = 490 + 1.276 - geometry->GetGapThickness()/2; //distance from center of mother volume to methane
- Float_t deltaphi = 19.5; //phi angle between center of chambers - z direction
- Float_t deltatheta = 20; //theta angle between center of chambers - x direction
- Float_t cosphi = TMath::Cos(deltaphi*TMath::Pi()/180);
- Float_t sinphi = TMath::Sin(deltaphi*TMath::Pi()/180);
- Float_t costheta = TMath::Cos(deltatheta*TMath::Pi()/180);
- Float_t sintheta = TMath::Sin(deltatheta*TMath::Pi()/180);
-
- //printf("\n\n%f %f %f %f %f %f %f\n\n",offset,deltatheta,deltaphi,cosphi,costheta,sinphi,sintheta);
-
- new TRotMatrix("rot993","rot993",90., 0. , 90. - deltaphi, 90. , deltaphi, -90. );
- new TRotMatrix("rot994","rot994",90., -deltatheta , 90. , 90.- deltatheta , 0. , 0. );
- new TRotMatrix("rot995","rot995",90., 0. , 90. , 90. , 0. , 0. );
- new TRotMatrix("rot996","rot996",90., deltatheta , 90. , 90 + deltatheta , 0. , 0. );
- new TRotMatrix("rot997","rot997",90., 360. - deltatheta, 108.2 , 90.- deltatheta ,18.2 , 90 - deltatheta);
- new TRotMatrix("rot998","rot998",90., 0. , 90 + deltaphi , 90. , deltaphi, 90. );
- new TRotMatrix("rot999","rot999",90., deltatheta , 108.2 , 90.+ deltatheta ,18.2 , 90 + deltatheta);
-
- Float_t pos1[3]={0. , offset*cosphi , offset*sinphi};
- Float_t pos2[3]={offset*sintheta , offset*costheta , 0. };
- Float_t pos3[3]={0. , offset , 0.};
- Float_t pos4[3]={-offset*sintheta , offset*costheta , 0.};
- Float_t pos5[3]={offset*sinphi , offset*costheta*cosphi, -offset*sinphi};
- Float_t pos6[3]={0. , offset*cosphi , -offset*sinphi};
- Float_t pos7[3]={ -offset*sinphi , offset*costheta*cosphi, -offset*sinphi};
-
-
- top->cd();
- //Float_t pos1[3]={0,471.8999,165.2599};
- //Chamber(0).SetChamberTransform(pos1[0],pos1[1],pos1[2],
- //new TRotMatrix("rot993","rot993",90,0,70.69,90,19.30999,-90);
- node = new TNode("RICH1","RICH1","S_RICH",pos1[0],pos1[1],pos1[2],"rot993");
- node->SetLineColor(kColorRICH);
- node->cd();
- subnode = new TNode("PHOTO1","PHOTO1","PHOTO",padplane_width + segmentation->DeadZone(),5,padplane_length/2 + segmentation->DeadZone()/2,"");
- subnode->SetLineColor(kGreen);
- fNodes->Add(subnode);
- subnode = new TNode("PHOTO1","PHOTO1","PHOTO",0,5,padplane_length/2 + segmentation->DeadZone()/2,"");
- subnode->SetLineColor(kGreen);
- fNodes->Add(subnode);
- subnode = new TNode("PHOTO1","PHOTO1","PHOTO",-padplane_width - segmentation->DeadZone(),5,padplane_length/2 + segmentation->DeadZone()/2,"");
- subnode->SetLineColor(kGreen);
- fNodes->Add(subnode);
- subnode = new TNode("PHOTO1","PHOTO1","PHOTO",padplane_width + segmentation->DeadZone(),5,-padplane_length/2 - segmentation->DeadZone()/2,"");
- subnode->SetLineColor(kGreen);
- fNodes->Add(subnode);
- subnode = new TNode("PHOTO1","PHOTO1","PHOTO",0,5,-padplane_length/2 - segmentation->DeadZone()/2,"");
- subnode->SetLineColor(kGreen);
- fNodes->Add(subnode);
- subnode = new TNode("PHOTO1","PHOTO1","PHOTO",-padplane_width - segmentation->DeadZone(),5,-padplane_length/2 - segmentation->DeadZone()/2,"");
- subnode->SetLineColor(kGreen);
- fNodes->Add(subnode);
- fNodes->Add(node);
-
-
- top->cd();
- //Float_t pos2[3]={171,470,0};
- //Chamber(1).SetChamberTransform(pos2[0],pos2[1],pos2[2],
- //new TRotMatrix("rot994","rot994",90,-20,90,70,0,0);
- node = new TNode("RICH2","RICH2","S_RICH",pos2[0],pos2[1],pos2[2],"rot994");
- node->SetLineColor(kColorRICH);
- node->cd();
- subnode = new TNode("PHOTO1","PHOTO1","PHOTO",padplane_width + segmentation->DeadZone(),5,padplane_length/2 + segmentation->DeadZone()/2,"");
- subnode->SetLineColor(kGreen);
- fNodes->Add(subnode);
- subnode = new TNode("PHOTO1","PHOTO1","PHOTO",0,5,padplane_length/2 + segmentation->DeadZone()/2,"");
- subnode->SetLineColor(kGreen);
- fNodes->Add(subnode);
- subnode = new TNode("PHOTO1","PHOTO1","PHOTO",-padplane_width - segmentation->DeadZone(),5,padplane_length/2 + segmentation->DeadZone()/2,"");
- subnode->SetLineColor(kGreen);
- fNodes->Add(subnode);
- subnode = new TNode("PHOTO1","PHOTO1","PHOTO",padplane_width + segmentation->DeadZone(),5,-padplane_length/2 - segmentation->DeadZone()/2,"");
- subnode->SetLineColor(kGreen);
- fNodes->Add(subnode);
- subnode = new TNode("PHOTO1","PHOTO1","PHOTO",0,5,-padplane_length/2 - segmentation->DeadZone()/2,"");
- subnode->SetLineColor(kGreen);
- fNodes->Add(subnode);
- subnode = new TNode("PHOTO1","PHOTO1","PHOTO",-padplane_width - segmentation->DeadZone(),5,-padplane_length/2 - segmentation->DeadZone()/2,"");
- subnode->SetLineColor(kGreen);
- fNodes->Add(subnode);
- fNodes->Add(node);
-
-
- top->cd();
- //Float_t pos3[3]={0,500,0};
- //Chamber(2).SetChamberTransform(pos3[0],pos3[1],pos3[2],
- //new TRotMatrix("rot995","rot995",90,0,90,90,0,0);
- node = new TNode("RICH3","RICH3","S_RICH",pos3[0],pos3[1],pos3[2],"rot995");
- node->SetLineColor(kColorRICH);
- node->cd();
- subnode = new TNode("PHOTO1","PHOTO1","PHOTO",padplane_width + segmentation->DeadZone(),5,padplane_length/2 + segmentation->DeadZone()/2,"");
- subnode->SetLineColor(kGreen);
- fNodes->Add(subnode);
- subnode = new TNode("PHOTO1","PHOTO1","PHOTO",0,5,padplane_length/2 + segmentation->DeadZone()/2,"");
- subnode->SetLineColor(kGreen);
- fNodes->Add(subnode);
- subnode = new TNode("PHOTO1","PHOTO1","PHOTO",-padplane_width - segmentation->DeadZone(),5,padplane_length/2 + segmentation->DeadZone()/2,"");
- subnode->SetLineColor(kGreen);
- fNodes->Add(subnode);
- subnode = new TNode("PHOTO1","PHOTO1","PHOTO",padplane_width + segmentation->DeadZone(),5,-padplane_length/2 - segmentation->DeadZone()/2,"");
- subnode->SetLineColor(kGreen);
- fNodes->Add(subnode);
- subnode = new TNode("PHOTO1","PHOTO1","PHOTO",0,5,-padplane_length/2 - segmentation->DeadZone()/2,"");
- subnode->SetLineColor(kGreen);
- fNodes->Add(subnode);
- subnode = new TNode("PHOTO1","PHOTO1","PHOTO",-padplane_width - segmentation->DeadZone(),5,-padplane_length/2 - segmentation->DeadZone()/2,"");
- subnode->SetLineColor(kGreen);
- fNodes->Add(subnode);
- fNodes->Add(node);
-
- top->cd();
- //Float_t pos4[3]={-171,470,0};
- //Chamber(3).SetChamberTransform(pos4[0],pos4[1],pos4[2],
- //new TRotMatrix("rot996","rot996",90,20,90,110,0,0);
- node = new TNode("RICH4","RICH4","S_RICH",pos4[0],pos4[1],pos4[2],"rot996");
- node->SetLineColor(kColorRICH);
- node->cd();
- subnode = new TNode("PHOTO1","PHOTO1","PHOTO",padplane_width + segmentation->DeadZone(),5,padplane_length/2 + segmentation->DeadZone()/2,"");
- subnode->SetLineColor(kGreen);
- fNodes->Add(subnode);
- subnode = new TNode("PHOTO1","PHOTO1","PHOTO",0,5,padplane_length/2 + segmentation->DeadZone()/2,"");
- subnode->SetLineColor(kGreen);
- fNodes->Add(subnode);
- subnode = new TNode("PHOTO1","PHOTO1","PHOTO",-padplane_width - segmentation->DeadZone(),5,padplane_length/2 + segmentation->DeadZone()/2,"");
- subnode->SetLineColor(kGreen);
- fNodes->Add(subnode);
- subnode = new TNode("PHOTO1","PHOTO1","PHOTO",padplane_width + segmentation->DeadZone(),5,-padplane_length/2 - segmentation->DeadZone()/2,"");
- subnode->SetLineColor(kGreen);
- fNodes->Add(subnode);
- subnode = new TNode("PHOTO1","PHOTO1","PHOTO",0,5,-padplane_length/2 - segmentation->DeadZone()/2,"");
- subnode->SetLineColor(kGreen);
- fNodes->Add(subnode);
- subnode = new TNode("PHOTO1","PHOTO1","PHOTO",-padplane_width - segmentation->DeadZone(),5,-padplane_length/2 - segmentation->DeadZone()/2,"");
- subnode->SetLineColor(kGreen);
- fNodes->Add(subnode);
- fNodes->Add(node);
-
-
+ for(int i=1;i<=kNCH;i++){
top->cd();
- //Float_t pos5[3]={161.3999,443.3999,-165.3};
- //Chamber(4).SetChamberTransform(pos5[0],pos5[1],pos5[2],
- //new TRotMatrix("rot997","rot997",90,340,108.1999,70,18.2,70);
- node = new TNode("RICH5","RICH5","S_RICH",pos5[0],pos5[1],pos5[2],"rot997");
- node->SetLineColor(kColorRICH);
+ node = new TNode(Form("RICH%i",i),Form("RICH%i",i),"S_RICH",C(i)->X(),C(i)->Y(),C(i)->Z(),C(i)->RotMatrixName());
+ node->SetLineColor(kRed);
node->cd();
- subnode = new TNode("PHOTO1","PHOTO1","PHOTO",padplane_width + segmentation->DeadZone(),5,padplane_length/2 + segmentation->DeadZone()/2,"");
+ subnode = new TNode("PHOTO1","PHOTO1","PHOTO",wid+Param()->DeadZone(),5,len/2+Param()->DeadZone()/2,"");
subnode->SetLineColor(kGreen);
fNodes->Add(subnode);
- subnode = new TNode("PHOTO1","PHOTO1","PHOTO",0,5,padplane_length/2 + segmentation->DeadZone()/2,"");
+ subnode = new TNode("PHOTO1","PHOTO1","PHOTO",0,5,len/2+Param()->DeadZone()/2,"");
subnode->SetLineColor(kGreen);
fNodes->Add(subnode);
- subnode = new TNode("PHOTO1","PHOTO1","PHOTO",-padplane_width - segmentation->DeadZone(),5,padplane_length/2 + segmentation->DeadZone()/2,"");
+ subnode = new TNode("PHOTO1","PHOTO1","PHOTO",-wid-Param()->DeadZone(),5,len/2+Param()->DeadZone()/2,"");
subnode->SetLineColor(kGreen);
fNodes->Add(subnode);
- subnode = new TNode("PHOTO1","PHOTO1","PHOTO",padplane_width + segmentation->DeadZone(),5,-padplane_length/2 - segmentation->DeadZone()/2,"");
+ subnode = new TNode("PHOTO1","PHOTO1","PHOTO",wid+Param()->DeadZone(),5,-len/2-Param()->DeadZone()/2,"");
subnode->SetLineColor(kGreen);
fNodes->Add(subnode);
- subnode = new TNode("PHOTO1","PHOTO1","PHOTO",0,5,-padplane_length/2 - segmentation->DeadZone()/2,"");
+ subnode = new TNode("PHOTO1","PHOTO1","PHOTO",0,5,-len/2 -Param()->DeadZone()/2,"");
subnode->SetLineColor(kGreen);
fNodes->Add(subnode);
- subnode = new TNode("PHOTO1","PHOTO1","PHOTO",-padplane_width - segmentation->DeadZone(),5,-padplane_length/2 - segmentation->DeadZone()/2,"");
+ subnode = new TNode("PHOTO1","PHOTO1","PHOTO",-wid-Param()->DeadZone(),5,-len/2 - Param()->DeadZone()/2,"");
subnode->SetLineColor(kGreen);
fNodes->Add(subnode);
fNodes->Add(node);
+ }
+ if(GetDebug())Info("BuildGeometry","Stop.");
+}//void AliRICH::BuildGeometry()
-
- top->cd();
- //Float_t pos6[3]={0., 471.9, -165.3,};
- //Chamber(5).SetChamberTransform(pos6[0],pos6[1],pos6[2],
- //new TRotMatrix("rot998","rot998",90,0,109.3099,90,19.30999,90);
- node = new TNode("RICH6","RICH6","S_RICH",pos6[0],pos6[1],pos6[2],"rot998");
- node->SetLineColor(kColorRICH);
- fNodes->Add(node);node->cd();
- subnode = new TNode("PHOTO1","PHOTO1","PHOTO",padplane_width + segmentation->DeadZone(),5,padplane_length/2 + segmentation->DeadZone()/2,"");
- subnode->SetLineColor(kGreen);
- fNodes->Add(subnode);
- subnode = new TNode("PHOTO1","PHOTO1","PHOTO",0,5,padplane_length/2 + segmentation->DeadZone()/2,"");
- subnode->SetLineColor(kGreen);
- fNodes->Add(subnode);
- subnode = new TNode("PHOTO1","PHOTO1","PHOTO",-padplane_width - segmentation->DeadZone(),5,padplane_length/2 + segmentation->DeadZone()/2,"");
- subnode->SetLineColor(kGreen);
- fNodes->Add(subnode);
- subnode = new TNode("PHOTO1","PHOTO1","PHOTO",padplane_width + segmentation->DeadZone(),5,-padplane_length/2 - segmentation->DeadZone()/2,"");
- subnode->SetLineColor(kGreen);
- fNodes->Add(subnode);
- subnode = new TNode("PHOTO1","PHOTO1","PHOTO",0,5,-padplane_length/2 - segmentation->DeadZone()/2,"");
- subnode->SetLineColor(kGreen);
- fNodes->Add(subnode);
- subnode = new TNode("PHOTO1","PHOTO1","PHOTO",-padplane_width - segmentation->DeadZone(),5,-padplane_length/2 - segmentation->DeadZone()/2,"");
- subnode->SetLineColor(kGreen);
- fNodes->Add(subnode);
-
-
- top->cd();
- //Float_t pos7[3]={-161.399,443.3999,-165.3};
- //Chamber(6).SetChamberTransform(pos7[0],pos7[1],pos7[2],
- //new TRotMatrix("rot999","rot999",90,20,108.1999,110,18.2,110);
- node = new TNode("RICH7","RICH7","S_RICH",pos7[0],pos7[1],pos7[2],"rot999");
- node->SetLineColor(kColorRICH);
- node->cd();
- subnode = new TNode("PHOTO1","PHOTO1","PHOTO",padplane_width + segmentation->DeadZone(),5,padplane_length/2 + segmentation->DeadZone()/2,"");
- subnode->SetLineColor(kGreen);
- fNodes->Add(subnode);
- subnode = new TNode("PHOTO1","PHOTO1","PHOTO",0,5,padplane_length/2 + segmentation->DeadZone()/2,"");
- subnode->SetLineColor(kGreen);
- fNodes->Add(subnode);
- subnode = new TNode("PHOTO1","PHOTO1","PHOTO",-padplane_width - segmentation->DeadZone(),5,padplane_length/2 + segmentation->DeadZone()/2,"");
- subnode->SetLineColor(kGreen);
- fNodes->Add(subnode);
- subnode = new TNode("PHOTO1","PHOTO1","PHOTO",padplane_width + segmentation->DeadZone(),5,-padplane_length/2 - segmentation->DeadZone()/2,"");
- subnode->SetLineColor(kGreen);
- fNodes->Add(subnode);
- subnode = new TNode("PHOTO1","PHOTO1","PHOTO",0,5,-padplane_length/2 - segmentation->DeadZone()/2,"");
- subnode->SetLineColor(kGreen);
- fNodes->Add(subnode);
- subnode = new TNode("PHOTO1","PHOTO1","PHOTO",-padplane_width - segmentation->DeadZone(),5,-padplane_length/2 - segmentation->DeadZone()/2,"");
- subnode->SetLineColor(kGreen);
- fNodes->Add(subnode);
- fNodes->Add(node);
-
-}
-
-//___________________________________________
-void AliRICH::CreateGeometry()
+static Int_t kCSI=6;
+static Int_t kGAP=9;
+//______________________________________________________________________________
+void AliRICH::CreateMaterials()
{
//
- // Create the geometry for RICH version 1
- //
+ // *** DEFINITION OF AVAILABLE RICH MATERIALS ***
+ // ORIGIN : NICK VAN EIJNDHOVEN
// Modified by: N. Colonna (INFN - BARI, Nicola.Colonna@ba.infn.it)
// R.A. Fini (INFN - BARI, Rosanna.Fini@ba.infn.it)
// R.A. Loconsole (Bari University, loco@riscom.ba.infn.it)
//
- //Begin_Html
- /*
- <img src="picts/AliRICHv1.gif">
- */
- //End_Html
- //Begin_Html
- /*
- <img src="picts/AliRICHv1Tree.gif">
- */
- //End_Html
-
- AliRICH *pRICH = (AliRICH *) gAlice->GetDetector("RICH");
- AliRICHSegmentationV0* segmentation;
- AliRICHGeometry* geometry;
- AliRICHChamber* iChamber;
-
- iChamber = &(pRICH->Chamber(0));
- segmentation=(AliRICHSegmentationV0*) iChamber->GetSegmentationModel();
- geometry=iChamber->GetGeometryModel();
-
- Float_t distance;
- distance = geometry->GetFreonThickness()/2 + geometry->GetQuartzThickness() + geometry->GetGapThickness();
- geometry->SetRadiatorToPads(distance);
-
- //Opaque quartz thickness
- Float_t oqua_thickness = .5;
- //CsI dimensions
-
- //Float_t csi_length = 160*.8 + 2.6;
- //Float_t csi_width = 144*.84 + 2*2.6;
-
- Float_t csi_width = segmentation->Npx()*segmentation->Dpx() + segmentation->DeadZone();
- Float_t csi_length = segmentation->Npy()*segmentation->Dpy() + 2*segmentation->DeadZone();
-
- //printf("\n\n\n\n\n In CreateGeometry() npx: %d, npy: %d, dpx: %f, dpy:%f deadzone: %f \n\n\n\n\n\n",segmentation->Npx(),segmentation->Npy(),segmentation->Dpx(),segmentation->Dpy(),segmentation->DeadZone());
-
- Int_t *idtmed = fIdtmed->GetArray()-999;
-
Int_t i;
- Float_t zs;
- Int_t idrotm[1099];
- Float_t par[3];
-
- // --- Define the RICH detector
- // External aluminium box
- par[0] = 68.8;
- par[1] = 13; //Original Settings
- par[2] = 70.86;
- /*par[0] = 73.15;
- par[1] = 11.5;
- par[2] = 71.1;*/
- gMC->Gsvolu("RICH", "BOX ", idtmed[1009], par, 3);
-
- // Air
- par[0] = 66.3;
- par[1] = 13; //Original Settings
- par[2] = 68.35;
- /*par[0] = 66.55;
- par[1] = 11.5;
- par[2] = 64.8;*/
- gMC->Gsvolu("SRIC", "BOX ", idtmed[1000], par, 3);
-
- // Air 2 (cutting the lower part of the box)
-
- par[0] = 1.25;
- par[1] = 3; //Original Settings
- par[2] = 70.86;
- gMC->Gsvolu("AIR2", "BOX ", idtmed[1000], par, 3);
-
- // Air 3 (cutting the lower part of the box)
-
- par[0] = 66.3;
- par[1] = 3; //Original Settings
- par[2] = 1.2505;
- gMC->Gsvolu("AIR3", "BOX ", idtmed[1000], par, 3);
-
- // Honeycomb
- par[0] = 66.3;
- par[1] = .188; //Original Settings
- par[2] = 68.35;
- /*par[0] = 66.55;
- par[1] = .188;
- par[2] = 63.1;*/
- gMC->Gsvolu("HONE", "BOX ", idtmed[1001], par, 3);
-
- // Aluminium sheet
- par[0] = 66.3;
- par[1] = .025; //Original Settings
- par[2] = 68.35;
- /*par[0] = 66.5;
- par[1] = .025;
- par[2] = 63.1;*/
- gMC->Gsvolu("ALUM", "BOX ", idtmed[1009], par, 3);
-
- // Quartz
- par[0] = geometry->GetQuartzWidth()/2;
- par[1] = geometry->GetQuartzThickness()/2;
- par[2] = geometry->GetQuartzLength()/2;
- /*par[0] = 63.1;
- par[1] = .25; //Original Settings
- par[2] = 65.5;*/
- /*par[0] = geometry->GetQuartzWidth()/2;
- par[1] = geometry->GetQuartzThickness()/2;
- par[2] = geometry->GetQuartzLength()/2;*/
- //printf("\n\n\n\n\n\n\n\\n\n\n\n Gap Thickness: %f %f %f\n\n\n\n\n\n\n\n\n\n\n\n\n\n",par[0],par[1],par[2]);
- gMC->Gsvolu("QUAR", "BOX ", idtmed[1002], par, 3);
-
- // Spacers (cylinders)
- par[0] = 0.;
- par[1] = .5;
- par[2] = geometry->GetFreonThickness()/2;
- gMC->Gsvolu("SPAC", "TUBE", idtmed[1002], par, 3);
-
- // Feet (freon slabs supports)
-
- par[0] = .7;
- par[1] = .3;
- par[2] = 1.9;
- gMC->Gsvolu("FOOT", "BOX", idtmed[1009], par, 3);
-
- // Opaque quartz
- par[0] = geometry->GetQuartzWidth()/2;
- par[1] = .2;
- par[2] = geometry->GetQuartzLength()/2;
- /*par[0] = 61.95;
- par[1] = .2; //Original Settings
- par[2] = 66.5;*/
- /*par[0] = 66.5;
- par[1] = .2;
- par[2] = 61.95;*/
- gMC->Gsvolu("OQUA", "BOX ", idtmed[1007], par, 3);
-
- // Frame of opaque quartz
- par[0] = geometry->GetOuterFreonWidth()/2;
- //+ oqua_thickness;
- par[1] = geometry->GetFreonThickness()/2;
- par[2] = geometry->GetOuterFreonLength()/2;
- //+ oqua_thickness;
- /*par[0] = 20.65;
- par[1] = .5; //Original Settings
- par[2] = 66.5;*/
- /*par[0] = 66.5;
- par[1] = .5;
- par[2] = 20.65;*/
- gMC->Gsvolu("OQF1", "BOX ", idtmed[1007], par, 3);
-
- par[0] = geometry->GetInnerFreonWidth()/2;
- par[1] = geometry->GetFreonThickness()/2;
- par[2] = geometry->GetInnerFreonLength()/2;
- gMC->Gsvolu("OQF2", "BOX ", idtmed[1007], par, 3);
-
- // Little bar of opaque quartz
- //par[0] = .275;
- //par[1] = geometry->GetQuartzThickness()/2;
- //par[2] = geometry->GetInnerFreonLength()/2 - 2.4;
- //par[2] = geometry->GetInnerFreonLength()/2;
- //+ oqua_thickness;
- /*par[0] = .275;
- par[1] = .25; //Original Settings
- par[2] = 63.1;*/
- /*par[0] = 63.1;
- par[1] = .25;
- par[2] = .275;*/
- //gMC->Gsvolu("BARR", "BOX ", idtmed[1007], par, 3);
-
- // Freon
- par[0] = geometry->GetOuterFreonWidth()/2 - oqua_thickness;
- par[1] = geometry->GetFreonThickness()/2;
- par[2] = geometry->GetOuterFreonLength()/2 - 2*oqua_thickness;
- /*par[0] = 20.15;
- par[1] = .5; //Original Settings
- par[2] = 65.5;*/
- /*par[0] = 65.5;
- par[1] = .5;
- par[2] = 20.15;*/
- gMC->Gsvolu("FRE1", "BOX ", idtmed[1003], par, 3);
-
- par[0] = geometry->GetInnerFreonWidth()/2 - oqua_thickness;
- par[1] = geometry->GetFreonThickness()/2;
- par[2] = geometry->GetInnerFreonLength()/2 - 2*oqua_thickness;
- gMC->Gsvolu("FRE2", "BOX ", idtmed[1003], par, 3);
-
- // Methane
- //par[0] = 64.8;
- par[0] = csi_width/2;
- par[1] = geometry->GetGapThickness()/2;
- //printf("\n\n\n\n\n\n\n\\n\n\n\n Gap Thickness: %f\n\n\n\n\n\n\n\n\n\n\n\n\n\n",par[1]);
- //par[2] = 64.8;
- par[2] = csi_length/2;
- gMC->Gsvolu("META", "BOX ", idtmed[1004], par, 3);
-
- // Methane gap
- //par[0] = 64.8;
- par[0] = csi_width/2;
- par[1] = geometry->GetProximityGapThickness()/2;
- //printf("\n\n\n\n\n\n\n\\n\n\n\n Gap Thickness: %f\n\n\n\n\n\n\n\n\n\n\n\n\n\n",par[1]);
- //par[2] = 64.8;
- par[2] = csi_length/2;
- gMC->Gsvolu("GAP ", "BOX ", idtmed[1008], par, 3);
-
- // CsI photocathode
- //par[0] = 64.8;
- par[0] = csi_width/2;
- par[1] = .25;
- //par[2] = 64.8;
- par[2] = csi_length/2;
- gMC->Gsvolu("CSI ", "BOX ", idtmed[1005], par, 3);
-
- // Anode grid
- par[0] = 0.;
- par[1] = .001;
- par[2] = 20.;
- gMC->Gsvolu("GRID", "TUBE", idtmed[1006], par, 3);
-
- // Wire supports
- // Bar of metal
-
- par[0] = csi_width/2;
- par[1] = 1.05;
- par[2] = 1.05;
- gMC->Gsvolu("WSMe", "BOX ", idtmed[1009], par, 3);
-
- // Ceramic pick up (base)
-
- par[0] = csi_width/2;
- par[1] = .25;
- par[2] = 1.05;
- gMC->Gsvolu("WSG1", "BOX ", idtmed[1010], par, 3);
-
- // Ceramic pick up (head)
-
- par[0] = csi_width/2;
- par[1] = .1;
- par[2] = .1;
- gMC->Gsvolu("WSG2", "BOX ", idtmed[1010], par, 3);
-
- // Aluminium supports for methane and CsI
- // Short bar
-
- par[0] = csi_width/2;
- par[1] = geometry->GetGapThickness()/2 + .25;
- par[2] = (68.35 - csi_length/2)/2;
- gMC->Gsvolu("SMSH", "BOX", idtmed[1009], par, 3);
-
- // Long bar
-
- par[0] = (66.3 - csi_width/2)/2;
- par[1] = geometry->GetGapThickness()/2 + .25;
- par[2] = csi_length/2 + 68.35 - csi_length/2;
- gMC->Gsvolu("SMLG", "BOX", idtmed[1009], par, 3);
-
- // Aluminium supports for freon
- // Short bar
-
- par[0] = geometry->GetQuartzWidth()/2;
- par[1] = .3;
- par[2] = (68.35 - geometry->GetQuartzLength()/2)/2;
- gMC->Gsvolu("SFSH", "BOX", idtmed[1009], par, 3);
-
- // Long bar
-
- par[0] = (66.3 - geometry->GetQuartzWidth()/2)/2;
- par[1] = .3;
- par[2] = geometry->GetQuartzLength()/2 + 68.35 - geometry->GetQuartzLength()/2;
- gMC->Gsvolu("SFLG", "BOX", idtmed[1009], par, 3);
-
- // PCB backplane
-
- par[0] = csi_width/2;
- par[1] = .25;
- par[2] = csi_length/4 -.5025;
- gMC->Gsvolu("PCB ", "BOX", idtmed[1011], par, 3);
-
-
- // Backplane supports
-
- // Aluminium slab
-
- par[0] = 33.15;
- par[1] = 2;
- par[2] = 21.65;
- gMC->Gsvolu("BACK", "BOX", idtmed[1009], par, 3);
-
- // Big hole
-
- par[0] = 9.05;
- par[1] = 2;
- par[2] = 4.4625;
- gMC->Gsvolu("BKHL", "BOX", idtmed[1000], par, 3);
-
- // Small hole
-
- par[0] = 5.7;
- par[1] = 2;
- par[2] = 4.4625;
- gMC->Gsvolu("BKHS", "BOX", idtmed[1000], par, 3);
-
- // Place holes inside backplane support
-
- gMC->Gspos("BKHS", 1, "BACK", .8 + 5.7,0., .6 + 4.4625, 0, "ONLY");
- gMC->Gspos("BKHS", 2, "BACK", -.8 - 5.7,0., .6 + 4.4625, 0, "ONLY");
- gMC->Gspos("BKHS", 3, "BACK", .8 + 5.7,0., -.6 - 4.4625, 0, "ONLY");
- gMC->Gspos("BKHS", 4, "BACK", -.8 - 5.7,0., -.6 - 4.4625, 0, "ONLY");
- gMC->Gspos("BKHS", 5, "BACK", .8 + 5.7,0., .6 + 8.925 + 1.2 + 4.4625, 0, "ONLY");
- gMC->Gspos("BKHS", 6, "BACK", -.8 - 5.7,0., .6 + 8.925 + 1.2 + 4.4625, 0, "ONLY");
- gMC->Gspos("BKHS", 7, "BACK", .8 + 5.7,0., -.6 - 8.925 - 1.2 - 4.4625, 0, "ONLY");
- gMC->Gspos("BKHS", 8, "BACK", -.8 - 5.7,0., -.6 - 8.925 - 1.2 - 4.4625, 0, "ONLY");
- gMC->Gspos("BKHL", 1, "BACK", .8 + 11.4 + 1.6 + 9.05, 0., .6 + 4.4625, 0, "ONLY");
- gMC->Gspos("BKHL", 2, "BACK", -.8 - 11.4 - 1.6 - 9.05, 0., .6 + 4.4625, 0, "ONLY");
- gMC->Gspos("BKHL", 3, "BACK", .8 + 11.4 + 1.6 + 9.05, 0., -.6 - 4.4625, 0, "ONLY");
- gMC->Gspos("BKHL", 4, "BACK", -.8 - 11.4 - 1.6 - 9.05, 0., -.6 - 4.4625, 0, "ONLY");
- gMC->Gspos("BKHL", 5, "BACK", .8 + 11.4+ 1.6 + 9.05, 0., .6 + 8.925 + 1.2 + 4.4625, 0, "ONLY");
- gMC->Gspos("BKHL", 6, "BACK", -.8 - 11.4 - 1.6 - 9.05, 0., .6 + 8.925 + 1.2 + 4.4625, 0, "ONLY");
- gMC->Gspos("BKHL", 7, "BACK", .8 + 11.4 + 1.6 + 9.05, 0., -.6 - 8.925 - 1.2 - 4.4625, 0, "ONLY");
- gMC->Gspos("BKHL", 8, "BACK", -.8 - 11.4 - 1.6 - 9.05, 0., -.6 - 8.925 - 1.2 - 4.4625, 0, "ONLY");
-
-
-
- // --- Places the detectors defined with GSVOLU
- // Place material inside RICH
- gMC->Gspos("SRIC", 1, "RICH", 0.,0., 0., 0, "ONLY");
- gMC->Gspos("AIR2", 1, "RICH", 66.3 + 1.2505, 1.276 - geometry->GetGapThickness()/2 - geometry->GetQuartzThickness() - geometry->GetFreonThickness()- .4 - .6 - .05 - .376 -.5 - 3.35, 0., 0, "ONLY");
- gMC->Gspos("AIR2", 2, "RICH", -66.3 - 1.2505, 1.276 - geometry->GetGapThickness()/2 - geometry->GetQuartzThickness() - geometry->GetFreonThickness()- .4 - .6 - .05 - .376 -.5 - 3.35, 0., 0, "ONLY");
- gMC->Gspos("AIR3", 1, "RICH", 0., 1.276 - geometry->GetGapThickness()/2 - geometry->GetQuartzThickness() - geometry->GetFreonThickness()- .4 - .6 - .05 - .376 -.5 - 3.35, -68.35 - 1.25, 0, "ONLY");
- gMC->Gspos("AIR3", 2, "RICH", 0., 1.276 - geometry->GetGapThickness()/2 - geometry->GetQuartzThickness() - geometry->GetFreonThickness()- .4 - .6 - .05 - .376 -.5 - 3.35, 68.35 + 1.25, 0, "ONLY");
-
-
- gMC->Gspos("ALUM", 1, "SRIC", 0., 1.276 - geometry->GetGapThickness()/2 - geometry->GetQuartzThickness() - geometry->GetFreonThickness()- .4 - .6 - .05 - .376 -.025, 0., 0, "ONLY");
- gMC->Gspos("HONE", 1, "SRIC", 0., 1.276- geometry->GetGapThickness()/2 - geometry->GetQuartzThickness() - geometry->GetFreonThickness()- .4 - .6 - .05 - .188, 0., 0, "ONLY");
- gMC->Gspos("ALUM", 2, "SRIC", 0., 1.276 - geometry->GetGapThickness()/2 - geometry->GetQuartzThickness() - geometry->GetFreonThickness()- .4 - .6 - .025, 0., 0, "ONLY");
- gMC->Gspos("FOOT", 1, "SRIC", 64.95, 1.276 - geometry->GetGapThickness()/2 - geometry->GetQuartzThickness() - geometry->GetFreonThickness()- .4 - .3, 36.9, 0, "ONLY");
- gMC->Gspos("FOOT", 2, "SRIC", 21.65, 1.276 - geometry->GetGapThickness()/2 - geometry->GetQuartzThickness() - geometry->GetFreonThickness()- .4 - .3 , 36.9, 0, "ONLY");
- gMC->Gspos("FOOT", 3, "SRIC", -21.65, 1.276 - geometry->GetGapThickness()/2 - geometry->GetQuartzThickness() - geometry->GetFreonThickness()- .4 - .3, 36.9, 0, "ONLY");
- gMC->Gspos("FOOT", 4, "SRIC", -64.95, 1.276 - geometry->GetGapThickness()/2 - geometry->GetQuartzThickness() - geometry->GetFreonThickness()- .4 - .3, 36.9, 0, "ONLY");
- gMC->Gspos("FOOT", 5, "SRIC", 64.95, 1.276 - geometry->GetGapThickness()/2 - geometry->GetQuartzThickness() - geometry->GetFreonThickness()- .4 - .3, -36.9, 0, "ONLY");
- gMC->Gspos("FOOT", 6, "SRIC", 21.65, 1.276 - geometry->GetGapThickness()/2 - geometry->GetQuartzThickness() - geometry->GetFreonThickness()- .4 - .3, -36.9, 0, "ONLY");
- gMC->Gspos("FOOT", 7, "SRIC", -21.65, 1.276 - geometry->GetGapThickness()/2 - geometry->GetQuartzThickness() - geometry->GetFreonThickness()- .4 - .3, -36.9, 0, "ONLY");
- gMC->Gspos("FOOT", 8, "SRIC", -64.95, 1.276 - geometry->GetGapThickness()/2 - geometry->GetQuartzThickness() - geometry->GetFreonThickness()- .4 - .3, -36.9, 0, "ONLY");
- gMC->Gspos("OQUA", 1, "SRIC", 0., 1.276 - geometry->GetGapThickness()/2 - geometry->GetQuartzThickness() - geometry->GetFreonThickness()- .2, 0., 0, "ONLY");
-
- // Supports placing
-
- // Methane supports
- gMC->Gspos("SMLG", 1, "SRIC", csi_width/2 + (66.3 - csi_width/2)/2, 1.276 + .25, 0., 0, "ONLY");
- gMC->Gspos("SMLG", 2, "SRIC", - csi_width/2 - (66.3 - csi_width/2)/2, 1.276 + .25, 0., 0, "ONLY");
- gMC->Gspos("SMSH", 1, "SRIC", 0., 1.276 + .25, csi_length/2 + (68.35 - csi_length/2)/2, 0, "ONLY");
- gMC->Gspos("SMSH", 2, "SRIC", 0., 1.276 + .25, - csi_length/2 - (68.35 - csi_length/2)/2, 0, "ONLY");
-
- //Freon supports
-
- Float_t supp_y = 1.276 - geometry->GetGapThickness()/2- geometry->GetQuartzThickness() -geometry->GetFreonThickness() - .2 + .3; //y position of freon supports
-
- gMC->Gspos("SFLG", 1, "SRIC", geometry->GetQuartzWidth()/2 + (66.3 - geometry->GetQuartzWidth()/2)/2, supp_y, 0., 0, "ONLY");
- gMC->Gspos("SFLG", 2, "SRIC", - geometry->GetQuartzWidth()/2 - (66.3 - geometry->GetQuartzWidth()/2)/2, supp_y, 0., 0, "ONLY");
- gMC->Gspos("SFSH", 1, "SRIC", 0., supp_y, geometry->GetQuartzLength()/2 + (68.35 - geometry->GetQuartzLength()/2)/2, 0, "ONLY");
- gMC->Gspos("SFSH", 2, "SRIC", 0., supp_y, - geometry->GetQuartzLength()/2 - (68.35 - geometry->GetQuartzLength()/2)/2, 0, "ONLY");
-
- AliMatrix(idrotm[1019], 0., 0., 90., 0., 90., 90.);
-
- //Placing of the spacers inside the freon slabs
-
- Int_t nspacers = 30;
- //printf("\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n Spacers:%d\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n",nspacers);
-
- //printf("Nspacers: %d", nspacers);
-
- for (i = 0; i < nspacers/3; i++) {
- zs = -11.6/2 + (TMath::Abs(nspacers/6) - i) * 12.2;
- gMC->Gspos("SPAC", i, "FRE1", 10.5, 0., zs, idrotm[1019], "ONLY"); //Original settings
- }
-
- for (i = nspacers/3; i < (nspacers*2)/3; i++) {
- zs = -11.6/2 + (nspacers/3 + TMath::Abs(nspacers/6) - i) * 12.2;
- gMC->Gspos("SPAC", i, "FRE1", 0, 0., zs, idrotm[1019], "ONLY"); //Original settings
- }
-
- for (i = (nspacers*2)/3; i < nspacers; ++i) {
- zs = -11.6/2 + ((nspacers*2)/3 + TMath::Abs(nspacers/6) - i) * 12.2;
- gMC->Gspos("SPAC", i, "FRE1", -10.5, 0., zs, idrotm[1019], "ONLY"); //Original settings
- }
-
- for (i = 0; i < nspacers/3; i++) {
- zs = -11.6/2 + (TMath::Abs(nspacers/6) - i) * 12.2;
- gMC->Gspos("SPAC", i, "FRE2", 10.5, 0., zs, idrotm[1019], "ONLY"); //Original settings
- }
-
- for (i = nspacers/3; i < (nspacers*2)/3; i++) {
- zs = -11.6/2 + (nspacers/3 + TMath::Abs(nspacers/6) - i) * 12.2;
- gMC->Gspos("SPAC", i, "FRE2", 0, 0., zs, idrotm[1019], "ONLY"); //Original settings
- }
-
- for (i = (nspacers*2)/3; i < nspacers; ++i) {
- zs = -11.6/2 + ((nspacers*2)/3 + TMath::Abs(nspacers/6) - i) * 12.2;
- gMC->Gspos("SPAC", i, "FRE2", -10.5, 0., zs, idrotm[1019], "ONLY"); //Original settings
- }
-
-
- gMC->Gspos("FRE1", 1, "OQF1", 0., 0., 0., 0, "ONLY");
- gMC->Gspos("FRE2", 1, "OQF2", 0., 0., 0., 0, "ONLY");
- gMC->Gspos("OQF1", 1, "SRIC", geometry->GetOuterFreonWidth()/2 + geometry->GetInnerFreonWidth()/2 + 2, 1.276 - geometry->GetGapThickness()/2- geometry->GetQuartzThickness() -geometry->GetFreonThickness()/2, 0., 0, "ONLY"); //Original settings (31.3)
-// printf("Opaque quartz in SRIC %f\n", 1.276 - geometry->GetGapThickness()/2- geometry->GetQuartzThickness() -geometry->GetFreonThickness()/2);
- gMC->Gspos("OQF2", 2, "SRIC", 0., 1.276 - geometry->GetGapThickness()/2 - geometry->GetQuartzThickness() - geometry->GetFreonThickness()/2, 0., 0, "ONLY"); //Original settings
- gMC->Gspos("OQF1", 3, "SRIC", - (geometry->GetOuterFreonWidth()/2 + geometry->GetInnerFreonWidth()/2) - 2, 1.276 - geometry->GetGapThickness()/2 - geometry->GetQuartzThickness() - geometry->GetFreonThickness()/2, 0., 0, "ONLY"); //Original settings (-31.3)
- //gMC->Gspos("BARR", 1, "QUAR", - geometry->GetInnerFreonWidth()/2 - oqua_thickness, 0., 0., 0, "ONLY"); //Original settings (-21.65)
- //gMC->Gspos("BARR", 2, "QUAR", geometry->GetInnerFreonWidth()/2 + oqua_thickness, 0., 0., 0, "ONLY"); //Original settings (21.65)
- gMC->Gspos("QUAR", 1, "SRIC", 0., 1.276 - geometry->GetGapThickness()/2 - geometry->GetQuartzThickness()/2, 0., 0, "ONLY");
- gMC->Gspos("GAP ", 1, "META", 0., geometry->GetGapThickness()/2 - geometry->GetProximityGapThickness()/2 - 0.0001, 0., 0, "ONLY");
- gMC->Gspos("META", 1, "SRIC", 0., 1.276, 0., 0, "ONLY");
- gMC->Gspos("CSI ", 1, "SRIC", 0., 1.276 + geometry->GetGapThickness()/2 + .25, 0., 0, "ONLY");
- printf("CSI pos: %f\n",1.276 + geometry->GetGapThickness()/2 + .25);
-
- // Wire support placing
-
- gMC->Gspos("WSG2", 1, "GAP ", 0., geometry->GetProximityGapThickness()/2 - .1, 0., 0, "ONLY");
- gMC->Gspos("WSG1", 1, "CSI ", 0., 0., 0., 0, "ONLY");
- gMC->Gspos("WSMe", 1, "SRIC ", 0., 1.276 + geometry->GetGapThickness()/2 + .5 + 1.05, 0., 0, "ONLY");
-
- // Backplane placing
-
- gMC->Gspos("BACK", 1, "SRIC ", -33.15, 1.276 + geometry->GetGapThickness()/2 + .5 + 2.1 + 2, 43.3, 0, "ONLY");
- gMC->Gspos("BACK", 2, "SRIC ", 33.15, 1.276 + geometry->GetGapThickness()/2 + .5 + 2.1 + 2 , 43.3, 0, "ONLY");
- gMC->Gspos("BACK", 3, "SRIC ", -33.15, 1.276 + geometry->GetGapThickness()/2 + .5 + 2.1 + 2, 0., 0, "ONLY");
- gMC->Gspos("BACK", 4, "SRIC ", 33.15, 1.276 + geometry->GetGapThickness()/2 + .5 + 2.1 + 2, 0., 0, "ONLY");
- gMC->Gspos("BACK", 5, "SRIC ", 33.15, 1.276 + geometry->GetGapThickness()/2 + .5 + 2.1 + 2, -43.3, 0, "ONLY");
- gMC->Gspos("BACK", 6, "SRIC ", -33.15, 1.276 + geometry->GetGapThickness()/2 + .5 + 2.1 + 2, -43.3, 0, "ONLY");
-
- // PCB placing
-
- gMC->Gspos("PCB ", 1, "SRIC ", 0., 1.276 + geometry->GetGapThickness()/2 + .5 + 1.05, csi_width/4 + .5025 + 2.5, 0, "ONLY");
- gMC->Gspos("PCB ", 2, "SRIC ", 0., 1.276 + geometry->GetGapThickness()/2 + .5 + 1.05, -csi_width/4 - .5025 - 2.5, 0, "ONLY");
-
-
-
- //printf("Position of the gap: %f to %f\n", 1.276 + geometry->GetGapThickness()/2 - geometry->GetProximityGapThickness()/2 - .2, 1.276 + geometry->GetGapThickness()/2 - geometry->GetProximityGapThickness()/2 + .2);
-
- // Place RICH inside ALICE apparatus
-
- /* old values
-
- AliMatrix(idrotm[1000], 90., 0., 70.69, 90., 19.31, -90.);
- AliMatrix(idrotm[1001], 90., -20., 90., 70., 0., 0.);
- AliMatrix(idrotm[1002], 90., 0., 90., 90., 0., 0.);
- AliMatrix(idrotm[1003], 90., 20., 90., 110., 0., 0.);
- AliMatrix(idrotm[1004], 90., 340., 108.2, 70., 18.2, 70.);
- AliMatrix(idrotm[1005], 90., 0., 109.31, 90., 19.31, 90.);
- AliMatrix(idrotm[1006], 90., 20., 108.2, 110., 18.2, 110.);
-
- gMC->Gspos("RICH", 1, "ALIC", 0., 471.9, 165.26, idrotm[1000], "ONLY");
- gMC->Gspos("RICH", 2, "ALIC", 171., 470., 0., idrotm[1001], "ONLY");
- gMC->Gspos("RICH", 3, "ALIC", 0., 500., 0., idrotm[1002], "ONLY");
- gMC->Gspos("RICH", 4, "ALIC", -171., 470., 0., idrotm[1003], "ONLY");
- gMC->Gspos("RICH", 5, "ALIC", 161.4, 443.4, -165.3, idrotm[1004], "ONLY");
- gMC->Gspos("RICH", 6, "ALIC", 0., 471.9, -165.3, idrotm[1005], "ONLY");
- gMC->Gspos("RICH", 7, "ALIC", -161.4, 443.4, -165.3, idrotm[1006], "ONLY");*/
-
- // The placing of the chambers is measured from the vertex to the base of the methane vessel (490 cm)
-
- Float_t offset = 490 + 1.276 - geometry->GetGapThickness()/2; //distance from center of mother volume to methane
- Float_t deltaphi = 19.5; //phi angle between center of chambers - z direction
- Float_t deltatheta = 20; //theta angle between center of chambers - x direction
- Float_t cosphi = TMath::Cos(deltaphi*TMath::Pi()/180);
- Float_t sinphi = TMath::Sin(deltaphi*TMath::Pi()/180);
- Float_t costheta = TMath::Cos(deltatheta*TMath::Pi()/180);
- Float_t sintheta = TMath::Sin(deltatheta*TMath::Pi()/180);
-
- //printf("\n\n%f %f %f %f %f %f %f\n\n",offset,deltatheta,deltaphi,cosphi,costheta,sinphi,sintheta);
-
- AliMatrix(idrotm[1000], 90., 0. , 90. - deltaphi, 90. , deltaphi, -90. );
- AliMatrix(idrotm[1001], 90., -deltatheta , 90. , 90.- deltatheta , 0. , 0. );
- AliMatrix(idrotm[1002], 90., 0. , 90. , 90. , 0. , 0. );
- AliMatrix(idrotm[1003], 90., deltatheta , 90. , 90 + deltatheta , 0. , 0. );
- AliMatrix(idrotm[1004], 90., 360. - deltatheta, 108.2 , 90.- deltatheta ,18.2 , 90 - deltatheta);
- AliMatrix(idrotm[1005], 90., 0. , 90 + deltaphi , 90. , deltaphi, 90. );
- AliMatrix(idrotm[1006], 90., deltatheta , 108.2 , 90.+ deltatheta ,18.2 , 90 + deltatheta);
-
- gMC->Gspos("RICH", 1, "ALIC", 0. , offset*cosphi , offset*sinphi ,idrotm[1000], "ONLY");
- gMC->Gspos("RICH", 2, "ALIC", (offset)*sintheta , offset*costheta , 0. ,idrotm[1001], "ONLY");
- gMC->Gspos("RICH", 3, "ALIC", 0. , offset , 0. ,idrotm[1002], "ONLY");
- gMC->Gspos("RICH", 4, "ALIC", -(offset)*sintheta, offset*costheta , 0. ,idrotm[1003], "ONLY");
- gMC->Gspos("RICH", 5, "ALIC", (offset)*sinphi , offset*costheta*cosphi, -offset*sinphi,idrotm[1004], "ONLY");
- gMC->Gspos("RICH", 6, "ALIC", 0. , offset*cosphi , -offset*sinphi,idrotm[1005], "ONLY");
- gMC->Gspos("RICH", 7, "ALIC", -(offset)*sinphi , offset*costheta*cosphi, -offset*sinphi,idrotm[1006], "ONLY");
-
-}
-
-
-//___________________________________________
-void AliRICH::CreateMaterials()
-{
- //
- // *** DEFINITION OF AVAILABLE RICH MATERIALS ***
- // ORIGIN : NICK VAN EIJNDHOVEN
- // Modified by: N. Colonna (INFN - BARI, Nicola.Colonna@ba.infn.it)
- // R.A. Fini (INFN - BARI, Rosanna.Fini@ba.infn.it)
- // R.A. Loconsole (Bari University, loco@riscom.ba.infn.it)
- //
- Int_t isxfld = gAlice->Field()->Integ();
- Float_t sxmgmx = gAlice->Field()->Max();
- Int_t i;
-
- /************************************Antonnelo's Values (14-vectors)*****************************************/
- /*
- Float_t ppckov[14] = { 5.63e-9,5.77e-9,5.9e-9,6.05e-9,6.2e-9,6.36e-9,6.52e-9,
- 6.7e-9,6.88e-9,7.08e-9,7.3e-9,7.51e-9,7.74e-9,8e-9 };
- Float_t rIndexQuarz[14] = { 1.528309,1.533333,
- 1.538243,1.544223,1.550568,1.55777,
- 1.565463,1.574765,1.584831,1.597027,
- 1.611858,1.6277,1.6472,1.6724 };
- Float_t rIndexOpaqueQuarz[14] = { 1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1. };
- Float_t rIndexMethane[14] = { 1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1. };
- Float_t rIndexGrid[14] = { 1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1. };
- Float_t abscoFreon[14] = { 179.0987,179.0987,
- 179.0987,179.0987,179.0987,142.92,56.65,13.95,10.43,7.07,2.03,.5773,.33496,0. };
- //Float_t abscoFreon[14] = { 1e-5,1e-5,1e-5,1e-5,1e-5,1e-5,1e-5,1e-5,1e-5,
- // 1e-5,1e-5,1e-5,1e-5,1e-5 };
- Float_t abscoQuarz[14] = { 64.035,39.98,35.665,31.262,27.527,22.815,21.04,17.52,
- 14.177,9.282,4.0925,1.149,.3627,.10857 };
- Float_t abscoOpaqueQuarz[14] = { 1e-5,1e-5,1e-5,1e-5,1e-5,1e-5,1e-5,1e-5,1e-5,
- 1e-5,1e-5,1e-5,1e-5,1e-5 };
- Float_t abscoCsI[14] = { 1e-4,1e-4,1e-4,1e-4,1e-4,1e-4,1e-4,1e-4,1e-4,1e-4,
- 1e-4,1e-4,1e-4,1e-4 };
- Float_t abscoMethane[14] = { 1e6,1e6,1e6,1e6,1e6,1e6,1e6,1e6,1e6,1e6,1e6,
- 1e6,1e6,1e6 };
- Float_t abscoGrid[14] = { 1e-4,1e-4,1e-4,1e-4,1e-4,1e-4,1e-4,1e-4,1e-4,1e-4,
- 1e-4,1e-4,1e-4,1e-4 };
- Float_t efficAll[14] = { 1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1. };
- Float_t efficCsI[14] = { 6e-4,.005,.0075,.01125,.045,.117,.135,.16575,
- .17425,.1785,.1836,.1904,.1938,.221 };
- Float_t efficGrid[14] = { 1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1. };
- */
-
-
- /**********************************End of Antonnelo's Values**********************************/
-
- /**********************************Values from rich_media.f (31-vectors)**********************************/
-
//Photons energy intervals
Float_t ppckov[26];
for (i=0;i<26;i++)
{
ppckov[i] = (Float_t(i)*0.1+5.5)*1e-9;
- //printf ("Energy intervals: %e\n",ppckov[i]);
}
Float_t a=f1/(e1*e1 - ene*ene);
Float_t b=f2/(e2*e2 - ene*ene);
rIndexQuarz[i] = TMath::Sqrt(1. + a + b );
- //printf ("rIndexQuarz: %e\n",rIndexQuarz[i]);
}
//Refraction index for opaque quarz, methane and grid
rIndexOpaqueQuarz[i]=1;
rIndexMethane[i]=1.000444;
rIndexGrid[i]=1;
- //printf ("rIndexOpaqueQuarz , etc: %e, %e, %e\n",rIndexOpaqueQuarz[i], rIndexMethane[i], rIndexGrid[i]=1);
}
//Absorption index for freon
179.0987, 142.9206, 56.64957, 25.58622, 13.95293, 12.03905, 10.42953, 8.804196,
7.069031, 4.461292, 2.028366, 1.293013, .577267, .40746, .334964, 0., 0., 0.};
- //Absorption index for quarz
- /*Float_t Qzt [21] = {.0,.0,.005,.04,.35,.647,.769,.808,.829,.844,.853,.858,.869,.887,.903,.902,.902,
- .906,.907,.907,.907};
- Float_t Wavl2[] = {150.,155.,160.0,165.0,170.0,175.0,180.0,185.0,190.0,195.0,200.0,205.0,210.0,
- 215.0,220.0,225.0,230.0,235.0,240.0,245.0,250.0};
- Float_t abscoQuarz[31];
- for (Int_t i=0;i<31;i++)
- {
- Float_t Xlam = 1237.79 / (ppckov[i]*1e9);
- if (Xlam <= 160) abscoQuarz[i] = 0;
- if (Xlam > 250) abscoQuarz[i] = 1;
- else
- {
- for (Int_t j=0;j<21;j++)
- {
- //printf ("Passed\n");
- if (Xlam > Wavl2[j] && Xlam < Wavl2[j+1])
- {
- Float_t Dabs = (Qzt[j+1] - Qzt[j])/(Wavl2[j+1] - Wavl2[j]);
- Float_t Abso = Qzt[j] + Dabs*(Xlam - Wavl2[j]);
- abscoQuarz[i] = -5.0/(TMath::Log(Abso));
- }
- }
- }
- printf ("abscoQuarz: %e abscoFreon: %e for energy: %e\n",abscoQuarz[i],abscoFreon[i],ppckov[i]);
- }*/
-
- /*Float_t abscoQuarz[31] = {49.64211, 48.41296, 47.46989, 46.50492, 45.13682, 44.47883, 43.1929 , 41.30922, 40.5943 ,
- 39.82956, 38.98623, 38.6247 , 38.43448, 37.41084, 36.22575, 33.74852, 30.73901, 24.25086,
- 17.94531, 11.88753, 5.99128, 3.83503, 2.36661, 1.53155, 1.30582, 1.08574, .8779708,
- .675275, 0., 0., 0.};
-
- for (Int_t i=0;i<31;i++)
- {
- abscoQuarz[i] = abscoQuarz[i]/10;
- }*/
Float_t abscoQuarz [26] = {105.8, 65.52, 48.58, 42.85, 35.79, 31.262, 28.598, 27.527, 25.007, 22.815, 21.004,
19.266, 17.525, 15.878, 14.177, 11.719, 9.282, 6.62, 4.0925, 2.601, 1.149, .667, .3627,
for (i=0;i<26;i++)
{
abscoMethane[i]=AbsoCH4(ppckov[i]*1e9);
- //printf("abscoMethane: %e for energy: %e\n", abscoMethane[i],ppckov[i]*1e9);
}
//Absorption index for opaque quarz, csi and grid, efficiency for all and grid
abscoGrid[i]=1e-4;
efficAll[i]=1;
efficGrid[i]=1;
- //printf ("All must be 1: %e, %e, %e, %e, %e\n",abscoOpaqueQuarz[i],abscoCsI[i],abscoGrid[i],efficAll[i],efficGrid[i]);
}
//Efficiency for csi
for (i=0;i<26;i++)
{
efficCsI[i] = efficCsI[i]/(1.-Fresnel(ppckov[i]*1e9,1.,0));
- //printf ("Fresnel result: %e for energy: %e\n",Fresnel(ppckov[i]*1e9,1.,0),ppckov[i]*1e9);
}
/*******************************************End of rich_media.f***************************************/
-
-
-
-
-
- Float_t afre[2], agri, amet[2], aqua[2], ahon, zfre[2], zgri, zhon,
- zmet[2], zqua[2];
- Int_t nlmatfre;
- Float_t densquao;
- Int_t nlmatmet, nlmatqua;
- Float_t wmatquao[2], rIndexFreon[26];
- Float_t aquao[2], epsil, stmin, zquao[2];
- Int_t nlmatquao;
- Float_t radlal, densal, tmaxfd, deemax, stemax;
- Float_t aal, zal, radlgri, densfre, radlhon, densgri, denshon,densqua, densmet, wmatfre[2], wmatmet[2], wmatqua[2];
+ Float_t rIndexFreon[26];
- Int_t *idtmed = fIdtmed->GetArray()-999;
// --- Photon energy (GeV)
// --- Refraction indexes
for (i = 0; i < 26; ++i) {
rIndexFreon[i] = ppckov[i] * .0172 * 1e9 + 1.177;
//rIndexFreon[i] = 1;
- //printf ("rIndexFreon: %e \n efficCsI: %e for energy: %e\n",rIndexFreon[i], efficCsI[i], ppckov[i]);
}
- // --- Detection efficiencies (quantum efficiency for CsI)
- // --- Define parameters for honeycomb.
- // Used carbon of equivalent rad. lenght
-
- ahon = 12.01;
- zhon = 6.;
- denshon = 0.1;
- radlhon = 18.8;
-
- // --- Parameters to include in GSMIXT, relative to Quarz (SiO2)
-
- aqua[0] = 28.09;
- aqua[1] = 16.;
- zqua[0] = 14.;
- zqua[1] = 8.;
- densqua = 2.64;
- nlmatqua = -2;
- wmatqua[0] = 1.;
- wmatqua[1] = 2.;
-
- // --- Parameters to include in GSMIXT, relative to opaque Quarz (SiO2)
-
- aquao[0] = 28.09;
- aquao[1] = 16.;
- zquao[0] = 14.;
- zquao[1] = 8.;
- densquao = 2.64;
- nlmatquao = -2;
- wmatquao[0] = 1.;
- wmatquao[1] = 2.;
-
- // --- Parameters to include in GSMIXT, relative to Freon (C6F14)
-
- afre[0] = 12.;
- afre[1] = 19.;
- zfre[0] = 6.;
- zfre[1] = 9.;
- densfre = 1.7;
- nlmatfre = -2;
- wmatfre[0] = 6.;
- wmatfre[1] = 14.;
-
- // --- Parameters to include in GSMIXT, relative to methane (CH4)
-
- amet[0] = 12.01;
- amet[1] = 1.;
- zmet[0] = 6.;
- zmet[1] = 1.;
- densmet = 7.17e-4;
- nlmatmet = -2;
- wmatmet[0] = 1.;
- wmatmet[1] = 4.;
+
+ Float_t a=0,z=0,den=0,radl=0,absl=0;
+ Float_t tmaxfd=-10.0, deemax=-0.2, stemax=-0.1,epsil=0.001, stmin=-0.001;
+ Int_t isxfld = gAlice->Field()->Integ();
+ Float_t sxmgmx = gAlice->Field()->Max();
- // --- Parameters to include in GSMIXT, relative to anode grid (Cu)
+ AliMaterial( 1, "Air $",a=14.61,z=7.3, den=0.001205,radl=30420.0,absl=67500);//(Air)
+ AliMedium(1, "DEFAULT MEDIUM AIR$", 1, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
- agri = 63.54;
- zgri = 29.;
- densgri = 8.96;
- radlgri = 1.43;
-
- // --- Parameters to include in GSMATE related to aluminium sheet
-
- aal = 26.98;
- zal = 13.;
- densal = 2.7;
- radlal = 8.9;
-
- // --- Glass parameters
-
- Float_t aglass[5]={12.01, 28.09, 16., 10.8, 23.};
- Float_t zglass[5]={ 6., 14., 8., 5., 11.};
- Float_t wglass[5]={ 0.5, 0.105, 0.355, 0.03, 0.01};
- Float_t dglass=1.74;
-
-
- AliMaterial(1, "Air $", 14.61, 7.3, .001205, 30420., 67500);
- AliMaterial(6, "HON", ahon, zhon, denshon, radlhon, 0);
- AliMaterial(16, "CSI", ahon, zhon, denshon, radlhon, 0);
- AliMixture(20, "QUA", aqua, zqua, densqua, nlmatqua, wmatqua);
- AliMixture(21, "QUAO", aquao, zquao, densquao, nlmatquao, wmatquao);
- AliMixture(30, "FRE", afre, zfre, densfre, nlmatfre, wmatfre);
- AliMixture(40, "MET", amet, zmet, densmet, nlmatmet, wmatmet);
- AliMixture(41, "METG", amet, zmet, densmet, nlmatmet, wmatmet);
- AliMaterial(11, "GRI", agri, zgri, densgri, radlgri, 0);
- AliMaterial(50, "ALUM", aal, zal, densal, radlal, 0);
- AliMixture(32, "GLASS",aglass, zglass, dglass, 5, wglass);
- AliMaterial(31, "COPPER$", 63.54, 29., 8.96, 1.4, 0.);
-
- tmaxfd = -10.;
- stemax = -.1;
- deemax = -.2;
- epsil = .001;
- stmin = -.001;
-
- AliMedium(1, "DEFAULT MEDIUM AIR$", 1, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
- AliMedium(2, "HONEYCOMB$", 6, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
- AliMedium(3, "QUARZO$", 20, 1, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
- AliMedium(4, "FREON$", 30, 1, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
- AliMedium(5, "METANO$", 40, 1, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
- AliMedium(6, "CSI$", 16, 1, isxfld, sxmgmx,tmaxfd, stemax, deemax, epsil, stmin);
- AliMedium(7, "GRIGLIA$", 11, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
- AliMedium(8, "QUARZOO$", 21, 1, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
- AliMedium(9, "GAP$", 41, 1, isxfld, sxmgmx,tmaxfd, .1, -deemax, epsil, -stmin);
- AliMedium(10, "ALUMINUM$", 50, 1, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
- AliMedium(11, "GLASS", 32, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
- AliMedium(12, "PCB_COPPER", 31, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
-
-
- gMC->SetCerenkov(idtmed[1000], 26, ppckov, abscoMethane, efficAll, rIndexMethane);
- gMC->SetCerenkov(idtmed[1001], 26, ppckov, abscoMethane, efficAll, rIndexMethane);
- gMC->SetCerenkov(idtmed[1002], 26, ppckov, abscoQuarz, efficAll,rIndexQuarz);
- gMC->SetCerenkov(idtmed[1003], 26, ppckov, abscoFreon, efficAll,rIndexFreon);
- gMC->SetCerenkov(idtmed[1004], 26, ppckov, abscoMethane, efficAll, rIndexMethane);
- gMC->SetCerenkov(idtmed[1005], 26, ppckov, abscoCsI, efficCsI, rIndexMethane);
- gMC->SetCerenkov(idtmed[1006], 26, ppckov, abscoGrid, efficGrid, rIndexGrid);
- gMC->SetCerenkov(idtmed[1007], 26, ppckov, abscoOpaqueQuarz, efficAll, rIndexOpaqueQuarz);
- gMC->SetCerenkov(idtmed[1008], 26, ppckov, abscoMethane, efficAll, rIndexMethane);
- gMC->SetCerenkov(idtmed[1009], 26, ppckov, abscoGrid, efficGrid, rIndexGrid);
- gMC->SetCerenkov(idtmed[1010], 26, ppckov, abscoOpaqueQuarz, efficAll, rIndexOpaqueQuarz);
-}
-
-//___________________________________________
-
+ AliMaterial( 6, "HON", a=12.01,z=6.0, den=0.1, radl=18.8, absl=0); //(C)-equivalent radl
+ AliMedium(2, "HONEYCOMB$", 6, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
+
+ AliMaterial(16, "CSI", a=12.01,z=6.0, den=0.1, radl=18.8, absl=0); //CsI-radl equivalent
+ AliMedium(kCSI, "CSI$", 16, 1, isxfld, sxmgmx,tmaxfd, stemax, deemax, epsil, stmin);
+
+ AliMaterial(11, "GRI", a=63.54,z=29.0,den=8.96, radl=1.43, absl=0); //anode grid (Cu)
+ AliMedium(7, "GRIGLIA$", 11, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
+
+ AliMaterial(50, "ALUM", a=26.98,z=13.0,den=2.7, radl=8.9, absl=0); //aluminium sheet (Al)
+ AliMedium(10, "ALUMINUM$", 50, 1, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
+
+ AliMaterial(31, "COPPER$", a=63.54,z=29.0,den=8.96, radl=1.4, absl=0); //(Cu)
+ AliMedium(12, "PCB_COPPER", 31, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
+
+ Float_t aQuartz[2]={28.09,16.0}; Float_t zQuartz[2]={14.00, 8.0}; Float_t wmatQuartz[2]={1,2};
+ AliMixture (20, "QUA",aQuartz,zQuartz,den=2.64,-2, wmatQuartz);//Quarz (SiO2) - trasnparent
+ AliMedium(3, "QUARZO$", 20, 1, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
+
+ AliMixture (21, "QUAO",aQuartz, zQuartz, den=2.64, -2, wmatQuartz);//Quarz (SiO2) - opaque
+ AliMedium(8, "QUARZOO$", 21, 1, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
+
+ Float_t aFreon[2]={12,19}; Float_t zFreon[2]={6,9}; Float_t wmatFreon[2]={6,14};
+ AliMixture (30, "FRE",aFreon,zFreon,den=1.7,-2,wmatFreon);//Freon (C6F14)
+ AliMedium(4, "FREON$", 30, 1, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
+
+ Float_t aMethane[2]={12.01,1}; Float_t zMethane[2]={6,1}; Float_t wmatMethane[2]={1,4};
+ AliMixture (40, "MET", aMethane, zMethane, den=7.17e-4,-2, wmatMethane);//methane (CH4)
+ AliMedium(5, "METANO$", 40, 1, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
+
+ AliMixture (41, "METG", aMethane, zMethane, den=7.17e-4, -2, wmatMethane);
+ AliMedium(kGAP, "GAP$", 41, 1, isxfld, sxmgmx,tmaxfd, 0.1, -deemax, epsil, -stmin);
+
+ Float_t aGlass[5]={12.01, 28.09, 16., 10.8, 23.};
+ Float_t zGlass[5]={ 6., 14., 8., 5., 11.};
+ Float_t wGlass[5]={ 0.5, 0.105, 0.355, 0.03, 0.01};
+ AliMixture (32, "GLASS",aGlass, zGlass, den=1.74, 5, wGlass);//Glass 50%C+10.5%Si+35.5%O+3% + 1%
+ AliMedium(11, "GLASS", 32, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
+
+ Int_t *idtmed = fIdtmed->GetArray()-999;
+ gMC->SetCerenkov(idtmed[1000], 26, ppckov, abscoMethane, efficAll, rIndexMethane);
+ gMC->SetCerenkov(idtmed[1001], 26, ppckov, abscoMethane, efficAll, rIndexMethane);
+ gMC->SetCerenkov(idtmed[1002], 26, ppckov, abscoQuarz, efficAll, rIndexQuarz);
+ gMC->SetCerenkov(idtmed[1003], 26, ppckov, abscoFreon, efficAll, rIndexFreon);
+ gMC->SetCerenkov(idtmed[1004], 26, ppckov, abscoMethane, efficAll, rIndexMethane);
+ gMC->SetCerenkov(idtmed[1005], 26, ppckov, abscoCsI, efficCsI, rIndexMethane);
+ gMC->SetCerenkov(idtmed[1006], 26, ppckov, abscoGrid, efficGrid, rIndexGrid);
+ gMC->SetCerenkov(idtmed[1007], 26, ppckov, abscoOpaqueQuarz, efficAll, rIndexOpaqueQuarz);
+ gMC->SetCerenkov(idtmed[1008], 26, ppckov, abscoMethane, efficAll, rIndexMethane);
+ gMC->SetCerenkov(idtmed[1009], 26, ppckov, abscoGrid, efficGrid, rIndexGrid);
+ gMC->SetCerenkov(idtmed[1010], 26, ppckov, abscoOpaqueQuarz, efficAll, rIndexOpaqueQuarz);
+}//void AliRICH::CreateMaterials()
+//__________________________________________________________________________________________________
Float_t AliRICH::Fresnel(Float_t ene,Float_t pdoti, Bool_t pola)
{
Float_t en[36] = {5.0,5.1,5.2,5.3,5.4,5.5,5.6,5.7,5.8,5.9,6.0,6.1,6.2,
6.3,6.4,6.5,6.6,6.7,6.8,6.9,7.0,7.1,7.2,7.3,7.4,7.5,7.6,7.7,
7.8,7.9,8.0,8.1,8.2,8.3,8.4,8.5};
-
-
Float_t csin[36] = {2.14,2.21,2.33,2.48,2.76,2.97,2.99,2.59,2.81,3.05,
2.86,2.53,2.55,2.66,2.79,2.96,3.18,3.05,2.84,2.81,2.38,2.11,
2.01,2.13,2.39,2.73,3.08,3.15,2.95,2.73,2.56,2.41,2.12,1.95,
1.72,1.53};
-
Float_t csik[36] = {0.,0.,0.,0.,0.,0.196,0.408,0.208,0.118,0.49,0.784,0.543,
0.424,0.404,0.371,0.514,0.922,1.102,1.139,1.376,1.461,1.253,0.878,
0.69,0.612,0.649,0.824,1.347,1.571,1.678,1.763,1.857,1.824,1.824,
fresn = fresn*rO;
return(fresn);
-}
-
-//__________________________________________
+}//Float_t AliRICH::Fresnel(Float_t ene,Float_t pdoti, Bool_t pola)
+//__________________________________________________________________________________________________
Float_t AliRICH::AbsoCH4(Float_t x)
{
Float_t alength=1./(1./abslm+1./absli+1./abslo+1./abslw);
return (alength);
}
-
-
-
-//___________________________________________
-Int_t AliRICH::DistancetoPrimitive(Int_t , Int_t )
-{
-
-// Default value
-
- return 9999;
-}
-
-//___________________________________________
+//__________________________________________________________________________________________________
void AliRICH::MakeBranch(Option_t* option)
-{
- // Create Tree branches for the RICH.
-
- const Int_t kBufferSize = 4000;
- char branchname[20];
-
-
- const char *cH = strstr(option,"H");
- const char *cD = strstr(option,"D");
- const char *cR = strstr(option,"R");
- const char *cS = strstr(option,"S");
-
-
-
- if (cH && TreeH()) {
- sprintf(branchname,"%sCerenkov",GetName());
- if (fCerenkovs == 0x0) fCerenkovs = new TClonesArray("AliRICHCerenkov",1000);
- MakeBranchInTree(TreeH(),branchname, &fCerenkovs, kBufferSize, 0) ;
-
- sprintf(branchname,"%sSDigits",GetName());
- if (fSDigits == 0x0) fSDigits = new TClonesArray("AliRICHSDigit",100000);
- MakeBranchInTree(TreeH(),branchname, &fSDigits, kBufferSize, 0) ;
- //branch->SetAutoDelete(kFALSE);
- //printf("Making branch %sSDigits in TreeH\n",GetName());
- if (fHits == 0x0) fHits = new TClonesArray("AliRICHHit",1000 );
-
- }
- //this is after cH because we need to guarantee that fHits array is created
- AliDetector::MakeBranch(option);
-
- if (cS && fLoader->TreeS()) {
- sprintf(branchname,"%sSDigits",GetName());
- if (fSDigits == 0x0) fSDigits = new TClonesArray("AliRICHSDigit",100000);
- MakeBranchInTree(gAlice->TreeS(),branchname, &fSDigits, kBufferSize, 0) ;
- }
-
- if (cD && fLoader->TreeD())
- {
- //
- // one branch for digits per chamber
- //
- Int_t i;
- if (fDchambers == 0x0)
- {
- fDchambers = new TObjArray(kNCH);
- for (i=0; i<kNCH ;i++)
- {
- fDchambers->AddAt(new TClonesArray("AliRICHDigit",10000), i);
- }
- }
- for (i=0; i<kNCH ;i++)
- {
- sprintf(branchname,"%sDigits%d",GetName(),i+1);
- MakeBranchInTree(fLoader->TreeD(),branchname, &((*fDchambers)[i]), kBufferSize, 0);
- }
- }
-
- if (cR && gAlice->TreeR())
- {
- //
- // one branch for raw clusters per chamber
- //
- Int_t i;
- if (fRawClusters == 0x0 )
- {
- fRawClusters = new TObjArray(kNCH);
- for (i=0; i<kNCH ;i++)
- {
- fRawClusters->AddAt(new TClonesArray("AliRICHRawCluster",10000), i);
- }
- }
-
- if (fRecHits1D == 0x0)
- {
- fRecHits1D = new TObjArray(kNCH);
- for (i=0; i<kNCH ;i++)
- {
- fRecHits1D->AddAt(new TClonesArray("AliRICHRecHit1D",1000), i);
- }
- }
-
- if (fRecHits3D == 0x0)
- {
- fRecHits3D = new TObjArray(kNCH);
- for (i=0; i<kNCH ;i++)
- {
- fRecHits3D->AddAt(new TClonesArray("AliRICHRecHit3D",1000), i);
- }
- }
-
- for (i=0; i<kNCH ;i++)
- {
- sprintf(branchname,"%sRawClusters%d",GetName(),i+1);
- MakeBranchInTree(gAlice->TreeR(),branchname, &((*fRawClusters)[i]), kBufferSize, 0);
- sprintf(branchname,"%sRecHits1D%d",GetName(),i+1);
- MakeBranchInTree(fLoader->TreeR(),branchname, &((*fRecHits1D)[i]), kBufferSize, 0);
- sprintf(branchname,"%sRecHits3D%d",GetName(),i+1);
- MakeBranchInTree(fLoader->TreeR(),branchname, &((*fRecHits3D)[i]), kBufferSize, 0);
- }
- }//if (cR && gAlice->TreeR())
-}
-
-//___________________________________________
-void AliRICH::SetTreeAddress()
-{
- // Set branch address for the Hits and Digits Tree.
- char branchname[20];
- Int_t i;
-
-
- TBranch *branch;
- TTree *treeH = fLoader->TreeH();
- TTree *treeD = fLoader->TreeD();
- TTree *treeR = fLoader->TreeR();
- TTree *treeS = fLoader->TreeS();
+{//Create Tree branches for the RICH.
+ if(GetDebug())Info("MakeBranch","Start with option= %s.",option);
- if (treeH)
- {
- branch = treeH->GetBranch("RICHCerenkov");
- if (branch)
- {
- if (fCerenkovs == 0x0) fCerenkovs = new TClonesArray("AliRICHCerenkov",1000);
- branch->SetAddress(&fCerenkovs);
- }
-
- branch = treeH->GetBranch("RICHSDigits");
- if (branch)
- {
- if (fSDigits == 0x0) fSDigits = new TClonesArray("AliRICHSDigit",100000);
- branch->SetAddress(&fSDigits);
- //printf("Setting sdigits branch address at %p in TreeH\n",&fSDigits);
- }
- if (fHits == 0x0) fHits = new TClonesArray("AliRICHHit",1000 );
- }
-
- //this is after TreeH because we need to guarantee that fHits array is created
- AliDetector::SetTreeAddress();
-
- if (treeS) {
- branch = treeS->GetBranch("RICHSDigits");
- if (branch)
- {
- if (fSDigits == 0x0) fSDigits = new TClonesArray("AliRICHSDigit",100000);
- branch->SetAddress(&fSDigits);
- //printf("Setting sdigits branch address at %p in TreeS\n",&fSDigits);
- }
- }
-
-
- if (treeD)
- {
- if (fDchambers == 0x0)
- {
- fDchambers = new TObjArray(kNCH);
- for (i=0; i<kNCH ;i++)
- {
- fDchambers->AddAt(new TClonesArray("AliRICHDigit",10000), i);
- }
- }
-
- for (i=0; i<kNCH; i++) {
- sprintf(branchname,"%sDigits%d",GetName(),i+1);
- if (fDchambers) {
- branch = treeD->GetBranch(branchname);
- if (branch) branch->SetAddress(&((*fDchambers)[i]));
- }
- }
- }
-
- if (treeR) {
-
- if (fRawClusters == 0x0 )
- {
- fRawClusters = new TObjArray(kNCH);
- for (i=0; i<kNCH ;i++)
- {
- fRawClusters->AddAt(new TClonesArray("AliRICHRawCluster",10000), i);
- }
- }
-
- if (fRecHits1D == 0x0)
- {
- fRecHits1D = new TObjArray(kNCH);
- for (i=0; i<kNCH ;i++)
- {
- fRecHits1D->AddAt(new TClonesArray("AliRICHRecHit1D",1000), i);
- }
- }
-
- if (fRecHits3D == 0x0)
- {
- fRecHits3D = new TObjArray(kNCH);
- for (i=0; i<kNCH ;i++)
- {
- fRecHits3D->AddAt(new TClonesArray("AliRICHRecHit3D",1000), i);
- }
- }
-
- for (i=0; i<kNCH; i++) {
- sprintf(branchname,"%sRawClusters%d",GetName(),i+1);
- if (fRawClusters) {
- branch = treeR->GetBranch(branchname);
- if (branch) branch->SetAddress(&((*fRawClusters)[i]));
- }
- }
-
- for (i=0; i<kNCH; i++) {
- sprintf(branchname,"%sRecHits1D%d",GetName(),i+1);
- if (fRecHits1D) {
- branch = treeR->GetBranch(branchname);
- if (branch) branch->SetAddress(&((*fRecHits1D)[i]));
- }
- }
+ const Int_t kBufferSize = 4000;
- for (i=0; i<kNCH; i++) {
- sprintf(branchname,"%sRecHits3D%d",GetName(),i+1);
- if (fRecHits3D) {
- branch = treeR->GetBranch(branchname);
- if (branch) branch->SetAddress(&((*fRecHits3D)[i]));
- }
- }
+ const char *cH = strstr(option,"H");
+ const char *cD = strstr(option,"D");
+ const char *cR = strstr(option,"R");
+ const char *cS = strstr(option,"S");
+
+ if(cH&&TreeH()){//H
+ CreateHits(); //branch will be created in AliDetector::MakeBranch
+ CreateCerenkovsOld(); MakeBranchInTree(TreeH(),"RICHCerenkov", &fCerenkovs, kBufferSize,0);
+ CreateSpecialsOld(); MakeBranchInTree(TreeH(),"RICHSpecials", &fSpecials,kBufferSize,0);
+ }//H
+ AliDetector::MakeBranch(option);//this is after cH because we need to guarantee that fHits array is created
- }
-}
-//___________________________________________
-void AliRICH::ResetHits()
-{
- // Reset number of clusters and the cluster array for this detector
- AliDetector::ResetHits();
- fNSDigits = 0;
- fNcerenkovs = 0;
- if (fSDigits) fSDigits->Clear();
- if (fCerenkovs) fCerenkovs->Clear();
-}
-
-
-//____________________________________________
-void AliRICH::ResetDigits()
-{
- //
- // Reset number of digits and the digits array for this detector
- //
- for ( int i=0;i<kNCH;i++ ) {
- //PH if (fDchambers && (*fDchambers)[i]) (*fDchambers)[i]->Clear();
- if (fDchambers && fDchambers->At(i)) fDchambers->At(i)->Clear();
- if (fNdch) fNdch[i]=0;
- }
-}
-
-//____________________________________________
-void AliRICH::ResetRawClusters()
-{
- //
- // Reset number of raw clusters and the raw clust array for this detector
- //
- for ( int i=0;i<kNCH;i++ ) {
- //PH if ((*fRawClusters)[i]) ((TClonesArray*)(*fRawClusters)[i])->Clear();
- if (fRawClusters->At(i)) ((TClonesArray*)fRawClusters->At(i))->Clear();
- if (fNrawch) fNrawch[i]=0;
- }
-}
-
-//____________________________________________
-void AliRICH::ResetRecHits1D()
-{
- //
- // Reset number of raw clusters and the raw clust array for this detector
- //
-
- for ( int i=0;i<kNCH;i++ ) {
- //PH if ((*fRecHits1D)[i]) ((TClonesArray*)(*fRecHits1D)[i])->Clear();
- if (fRecHits1D->At(i)) ((TClonesArray*)fRecHits1D->At(i))->Clear();
- if (fNrechits1D) fNrechits1D[i]=0;
- }
-}
-
-//____________________________________________
-void AliRICH::ResetRecHits3D()
-{
- //
- // Reset number of raw clusters and the raw clust array for this detector
- //
+ if(cS&&fLoader->TreeS()){//S
+ CreateSDigits(); MakeBranchInTree(fLoader->TreeS(),"RICH",&fSdigits,kBufferSize,0) ;
+ }//S
+
+ if(cD&&fLoader->TreeD()){//D
+ CreateDigits();
+ CreateDigitsOld();
+ for(int i=0;i<kNCH;i++){
+ MakeBranchInTree(fLoader->TreeD(),Form("%sDigits%d",GetName(),i+1),&((*fDchambers)[i]),kBufferSize,0);
+ MakeBranchInTree(fLoader->TreeD(),Form("%s%d",GetName(),i+1),&((*fDigitsNew)[i]),kBufferSize,0);
+ }
+ }//D
- for ( int i=0;i<kNCH;i++ ) {
- //PH if ((*fRecHits3D)[i]) ((TClonesArray*)(*fRecHits3D)[i])->Clear();
- if (fRecHits3D->At(i)) ((TClonesArray*)fRecHits3D->At(i))->Clear();
- if (fNrechits3D) fNrechits3D[i]=0;
- }
-}
-
-
-//___________________________________________
-void AliRICH::StepManager()
-{
-// Full Step Manager
-
- Int_t copy, id;
- static Int_t idvol;
- static Int_t vol[2];
- Int_t ipart;
- static Float_t hits[22];
- static Float_t ckovData[19];
- TLorentzVector position;
- TLorentzVector momentum;
- Float_t pos[3];
- Float_t mom[4];
- Float_t localPos[3];
- Float_t localMom[4];
- Float_t localTheta,localPhi;
- Float_t theta,phi;
- Float_t destep, step;
- Double_t ranf[2];
- Int_t nPads;
- Float_t coscerenkov;
- static Float_t eloss, xhit, yhit, tlength;
- const Float_t kBig=1.e10;
-
- TClonesArray &lhits = *fHits;
- TParticle *current = (TParticle*)(*gAlice->Particles())[gAlice->CurrentTrack()];
-
- //if (current->Energy()>1)
- //{
-
- // Only gas gap inside chamber
- // Tag chambers and record hits when track enters
-
-
- id=gMC->CurrentVolID(copy);
- idvol = copy-1;
- Float_t cherenkovLoss=0;
- //gAlice->KeepTrack(gAlice->CurrentTrack());
-
- gMC->TrackPosition(position);
- pos[0]=position(0);
- pos[1]=position(1);
- pos[2]=position(2);
- //bzero((char *)ckovData,sizeof(ckovData)*19);
- ckovData[1] = pos[0]; // X-position for hit
- ckovData[2] = pos[1]; // Y-position for hit
- ckovData[3] = pos[2]; // Z-position for hit
- ckovData[6] = 0; // dummy track length
- //ckovData[11] = gAlice->CurrentTrack();
-
- //printf("\n+++++++++++\nTrack: %d\n++++++++++++\n",gAlice->CurrentTrack());
-
- //AliRICH *RICH = (AliRICH *) gAlice->GetDetector("RICH");
-
- /********************Store production parameters for Cerenkov photons************************/
-//is it a Cerenkov photon?
- if (gMC->TrackPid() == 50000050) {
-
- //if (gMC->VolId("GAP ")==gMC->CurrentVolID(copy))
- //{
- Float_t ckovEnergy = current->Energy();
- //energy interval for tracking
- if (ckovEnergy > 5.6e-09 && ckovEnergy < 7.8e-09 )
- //if (ckovEnergy > 0)
- {
- if (gMC->IsTrackEntering()){ //is track entering?
- //printf("Track entered (1)\n");
- if (gMC->VolId("FRE1")==gMC->CurrentVolID(copy) || gMC->VolId("FRE2")==gMC->CurrentVolID(copy))
- { //is it in freo?
- if (gMC->IsNewTrack()){ //is it the first step?
- //printf("I'm in!\n");
- Int_t mother = current->GetFirstMother();
-
- //printf("Second Mother:%d\n",current->GetSecondMother());
-
- ckovData[10] = mother;
- ckovData[11] = gAlice->CurrentTrack();
- ckovData[12] = 1; //Media where photon was produced 1->Freon, 2->Quarz
- //printf("Produced in FREO\n");
- fCkovNumber++;
- fFreonProd=1;
- //printf("Index: %d\n",fCkovNumber);
- } //first step question
- } //freo question
-
- if (gMC->IsNewTrack()){ //is it first step?
- if (gMC->VolId("QUAR")==gMC->CurrentVolID(copy)) //is it in quarz?
- {
- ckovData[12] = 2;
- //printf("Produced in QUAR\n");
- } //quarz question
- } //first step question
-
- //printf("Before %d\n",fFreonProd);
- } //track entering question
-
- if (ckovData[12] == 1) //was it produced in Freon?
- //if (fFreonProd == 1)
- {
- if (gMC->IsTrackEntering()){ //is track entering?
- //printf("Track entered (2)\n");
- //printf("Current volume (should be META): %s\n",gMC->CurrentVolName());
- //printf("VolId: %d, CurrentVolID: %d\n",gMC->VolId("META"),gMC->CurrentVolID(copy));
- if (gMC->VolId("META")==gMC->CurrentVolID(copy)) //is it in gap?
- {
- //printf("Got in META\n");
- gMC->TrackMomentum(momentum);
- mom[0]=momentum(0);
- mom[1]=momentum(1);
- mom[2]=momentum(2);
- mom[3]=momentum(3);
-
- gMC->Gmtod(mom,localMom,2);
- Float_t cophi = TMath::Cos(TMath::ATan2(localMom[0], localMom[1]));
- Float_t t = (1. - .025 / cophi) * (1. - .05 / cophi);
- /**************** Photons lost in second grid have to be calculated by hand************/
- gMC->GetRandom()->RndmArray(1,ranf);
- if (ranf[0] > t) {
- gMC->StopTrack();
- ckovData[13] = 5;
- AddCerenkov(gAlice->CurrentTrack(),vol,ckovData);
- //printf("Added One (1)!\n");
- //printf("Lost one in grid\n");
- }
- /**********************************************************************************/
- } //gap
-
- //printf("Current volume (should be CSI) (1): %s\n",gMC->CurrentVolName());
- //printf("VolId: %d, CurrentVolID: %d\n",gMC->VolId("CSI "),gMC->CurrentVolID(copy));
- if (gMC->VolId("CSI ")==gMC->CurrentVolID(copy)) //is it in csi?
- {
- //printf("Got in CSI\n");
- gMC->TrackMomentum(momentum);
- mom[0]=momentum(0);
- mom[1]=momentum(1);
- mom[2]=momentum(2);
- mom[3]=momentum(3);
-
- gMC->Gmtod(mom,localMom,2);
- /********* Photons lost by Fresnel reflection have to be calculated by hand********/
- /***********************Cerenkov phtons (always polarised)*************************/
- Double_t localTc = localMom[0]*localMom[0]+localMom[2]*localMom[2];
- Double_t localRt = TMath::Sqrt(localTc);
- localTheta = Float_t(TMath::ATan2(localRt,Double_t(localMom[1])));
- Double_t cotheta = TMath::Abs(cos(localTheta));
- Float_t t = Fresnel(ckovEnergy*1e9,cotheta,1);
- gMC->GetRandom()->RndmArray(1,ranf);
- if (ranf[0] < t) {
- gMC->StopTrack();
- ckovData[13] = 6;
- AddCerenkov(gAlice->CurrentTrack(),vol,ckovData);
-
- //printf("Added One (2)!\n");
- //printf("Lost by Fresnel\n");
- }
- /**********************************************************************************/
- }
- } //track entering?
-
-
- /********************Evaluation of losses************************/
- /******************still in the old fashion**********************/
-
- TArrayI procs;
- Int_t i1 = gMC->StepProcesses(procs); //number of physics mechanisms acting on the particle
- for (Int_t i = 0; i < i1; ++i) {
- // Reflection loss
- if (procs[i] == kPLightReflection) { //was it reflected
- ckovData[13]=10;
- if (gMC->VolId("FRE1")==gMC->CurrentVolID(copy) || gMC->VolId("FRE2")==gMC->CurrentVolID(copy))
- ckovData[13]=1;
- if (gMC->CurrentVolID(copy) == gMC->VolId("QUAR"))
- ckovData[13]=2;
- //gMC->StopTrack();
- //AddCerenkov(gAlice->CurrentTrack(),vol,ckovData);
- } //reflection question
-
- // Absorption loss
- else if (procs[i] == kPLightAbsorption) { //was it absorbed?
- //printf("Got in absorption\n");
- ckovData[13]=20;
- if (gMC->VolId("FRE1")==gMC->CurrentVolID(copy) || gMC->VolId("FRE2")==gMC->CurrentVolID(copy))
- ckovData[13]=11;
- if (gMC->CurrentVolID(copy) == gMC->VolId("QUAR"))
- ckovData[13]=12;
- if (gMC->CurrentVolID(copy) == gMC->VolId("META"))
- ckovData[13]=13;
- if (gMC->CurrentVolID(copy) == gMC->VolId("GAP "))
- ckovData[13]=13;
-
- if (gMC->CurrentVolID(copy) == gMC->VolId("SRIC"))
- ckovData[13]=15;
-
- // CsI inefficiency
- if (gMC->CurrentVolID(copy) == gMC->VolId("CSI ")) {
- ckovData[13]=16;
- }
- gMC->StopTrack();
- AddCerenkov(gAlice->CurrentTrack(),vol,ckovData);
- //printf("Added One (3)!\n");
- //printf("Added cerenkov %d\n",fCkovNumber);
- } //absorption question
-
-
- // Photon goes out of tracking scope
- else if (procs[i] == kPStop) { //is it below energy treshold?
- ckovData[13]=21;
- gMC->StopTrack();
- AddCerenkov(gAlice->CurrentTrack(),vol,ckovData);
- //printf("Added One (4)!\n");
- } // energy treshold question
- } //number of mechanisms cycle
- /**********************End of evaluation************************/
- } //freon production question
- } //energy interval question
- //}//inside the proximity gap question
- } //cerenkov photon question
+ if(cR&&fLoader->TreeR()){//R
+ CreateRawClustersOld();
+ for(int i=0; i<kNCH ;i++)
+ MakeBranchInTree(fLoader->TreeR(),Form("%sRawClusters%d",GetName(),i+1), &((*fRawClusters)[i]), kBufferSize, 0);
+ }//R
+ if(GetDebug())Info("MakeBranch","Stop.");
+}//void AliRICH::MakeBranch(Option_t* option)
+//__________________________________________________________________________________________________
+void AliRICH::SetTreeAddress()
+{//Set branch address for the Hits and Digits Tree.
+ if(GetDebug())Info("SetTreeAddress","Start.");
- /**************************************End of Production Parameters Storing*********************/
-
-
- /*******************************Treat photons that hit the CsI (Ckovs and Feedbacks)************/
+ TBranch *branch;
- if (gMC->TrackPid() == 50000050 || gMC->TrackPid() == 50000051) {
- //printf("Cerenkov\n");
+ if(fLoader->TreeH()){//H
+ if(GetDebug())Info("SetTreeAddress","tree H is requested.");
+ CreateHits();//branch map will be in AliDetector::SetTreeAddress
+ branch=fLoader->TreeH()->GetBranch("RICHCerenkov"); if(branch){CreateCerenkovsOld(); branch->SetAddress(&fCerenkovs);}
+ branch=fLoader->TreeH()->GetBranch("RICHSpecials"); if(branch){CreateSpecialsOld(); branch->SetAddress(&fSpecials);}
+ }//H
+ AliDetector::SetTreeAddress();//this is after TreeH because we need to guarantee that fHits array is created
+
+ if(fLoader->TreeS()){//S
+ if(GetDebug())Info("SetTreeAddress","tree S is requested.");
+ branch=fLoader->TreeS()->GetBranch(GetName()); if(branch){CreateSDigits(); branch->SetAddress(&fSdigits);}
+ }//S
+
+ if(fLoader->TreeD()){//D
+ if(GetDebug())Info("SetTreeAddress","tree D is requested.");
+ for(int i=0;i<kNCH;i++){
+ branch=fLoader->TreeD()->GetBranch(Form("%s%d",GetName(),i+1));
+ if(branch){CreateDigits(); branch->SetAddress(&((*fDigitsNew)[i]));}
- //if (gMC->TrackPid() == 50000051)
- //printf("Tracking a feedback\n");
-
- if (gMC->VolId("CSI ")==gMC->CurrentVolID(copy))
- {
- //printf("Current volume (should be CSI) (2): %s\n",gMC->CurrentVolName());
- //printf("VolId: %d, CurrentVolID: %d\n",gMC->VolId("CSI "),gMC->CurrentVolID(copy));
- //printf("Got in CSI\n");
- //printf("Tracking a %d\n",gMC->TrackPid());
- if (gMC->Edep() > 0.){
- gMC->TrackPosition(position);
- gMC->TrackMomentum(momentum);
- pos[0]=position(0);
- pos[1]=position(1);
- pos[2]=position(2);
- mom[0]=momentum(0);
- mom[1]=momentum(1);
- mom[2]=momentum(2);
- mom[3]=momentum(3);
- Double_t tc = mom[0]*mom[0]+mom[1]*mom[1];
- Double_t rt = TMath::Sqrt(tc);
- theta = Float_t(TMath::ATan2(rt,Double_t(mom[2])))*kRaddeg;
- phi = Float_t(TMath::ATan2(Double_t(mom[1]),Double_t(mom[0])))*kRaddeg;
-
- gMC->CurrentVolOffID(2,copy);
- vol[0]=copy;
- idvol=vol[0]-1;
-
-
- gMC->Gmtod(pos,localPos,1);
-
- //Chamber(idvol).GlobaltoLocal(pos,localPos);
-
- gMC->Gmtod(mom,localMom,2);
-
- //Chamber(idvol).GlobaltoLocal(mom,localMom);
-
- gMC->CurrentVolOffID(2,copy);
- vol[0]=copy;
- idvol=vol[0]-1;
-
- //Int_t sector=((AliRICHChamber*) (*fChambers)[idvol])
- //->Sector(localPos[0], localPos[2]);
- //printf("Sector:%d\n",sector);
-
- /*if (gMC->TrackPid() == 50000051){
- fFeedbacks++;
- printf("Feedbacks:%d\n",fFeedbacks);
- }*/
-
- //PH ((AliRICHChamber*) (*fChambers)[idvol])
- ((AliRICHChamber*)fChambers->At(idvol))
- ->SigGenInit(localPos[0], localPos[2], localPos[1]);
- if(idvol<kNCH) {
- ckovData[0] = gMC->TrackPid(); // particle type
- ckovData[1] = pos[0]; // X-position for hit
- ckovData[2] = pos[1]; // Y-position for hit
- ckovData[3] = pos[2]; // Z-position for hit
- ckovData[4] = theta; // theta angle of incidence
- ckovData[5] = phi; // phi angle of incidence
- ckovData[8] = (Float_t) fNSDigits; // first sdigit
- ckovData[9] = -1; // last pad hit
- ckovData[13] = 4; // photon was detected
- ckovData[14] = mom[0];
- ckovData[15] = mom[1];
- ckovData[16] = mom[2];
-
- destep = gMC->Edep();
- gMC->SetMaxStep(kBig);
- cherenkovLoss += destep;
- ckovData[7]=cherenkovLoss;
-
- nPads = Hits2SDigits(localPos[0],localPos[2],cherenkovLoss,idvol,kCerenkov);
-
- if (fNSDigits > (Int_t)ckovData[8]) {
- ckovData[8]= ckovData[8]+1;
- ckovData[9]= (Float_t) fNSDigits;
- }
-
- //printf("Cerenkov loss: %f\n", cherenkovLoss);
-
- ckovData[17] = nPads;
- //printf("nPads:%d",nPads);
-
- //TClonesArray *Hits = RICH->Hits();
- AliRICHHit *mipHit = (AliRICHHit*) (fHits->UncheckedAt(0));
- if (mipHit)
- {
- mom[0] = current->Px();
- mom[1] = current->Py();
- mom[2] = current->Pz();
- Float_t mipPx = mipHit->MomX();
- Float_t mipPy = mipHit->MomY();
- Float_t mipPz = mipHit->MomZ();
-
- Float_t r = mom[0]*mom[0] + mom[1]*mom[1] + mom[2]*mom[2];
- Float_t rt = TMath::Sqrt(r);
- Float_t mipR = mipPx*mipPx + mipPy*mipPy + mipPz*mipPz;
- Float_t mipRt = TMath::Sqrt(mipR);
- if ((rt*mipRt) > 0)
- {
- coscerenkov = (mom[0]*mipPx + mom[1]*mipPy + mom[2]*mipPz)/(rt*mipRt);
- }
- else
- {
- coscerenkov = 0;
- }
- Float_t cherenkov = TMath::ACos(coscerenkov);
- ckovData[18]=cherenkov;
- }
- //if (sector != -1)
- //{
- AddHit(gAlice->CurrentTrack(),vol,ckovData);
- AddCerenkov(gAlice->CurrentTrack(),vol,ckovData);
- //printf("Added One (5)!\n");
- //}
- }
- }
- }
- }
-
- /***********************************************End of photon hits*********************************************/
-
-
- /**********************************************Charged particles treatment*************************************/
-
- else if (gMC->TrackCharge())
- //else if (1 == 1)
- {
-//If MIP
- /*if (gMC->IsTrackEntering())
- {
- hits[13]=20;//is track entering?
- }*/
- if (gMC->VolId("FRE1")==gMC->CurrentVolID(copy) || gMC->VolId("FRE2")==gMC->CurrentVolID(copy))
- {
- gMC->TrackMomentum(momentum);
- mom[0]=momentum(0);
- mom[1]=momentum(1);
- mom[2]=momentum(2);
- mom[3]=momentum(3);
- hits [19] = mom[0];
- hits [20] = mom[1];
- hits [21] = mom[2];
- fFreonProd=1;
- }
-
- if (gMC->VolId("GAP ")== gMC->CurrentVolID(copy)) {
-// Get current particle id (ipart), track position (pos) and momentum (mom)
-
- gMC->CurrentVolOffID(3,copy);
- vol[0]=copy;
- idvol=vol[0]-1;
-
- //Int_t sector=((AliRICHChamber*) (*fChambers)[idvol])
- //->Sector(localPos[0], localPos[2]);
- //printf("Sector:%d\n",sector);
-
- gMC->TrackPosition(position);
- gMC->TrackMomentum(momentum);
- pos[0]=position(0);
- pos[1]=position(1);
- pos[2]=position(2);
- mom[0]=momentum(0);
- mom[1]=momentum(1);
- mom[2]=momentum(2);
- mom[3]=momentum(3);
-
- gMC->Gmtod(pos,localPos,1);
-
- //Chamber(idvol).GlobaltoLocal(pos,localPos);
-
- gMC->Gmtod(mom,localMom,2);
-
- //Chamber(idvol).GlobaltoLocal(mom,localMom);
-
- ipart = gMC->TrackPid();
- //
- // momentum loss and steplength in last step
- destep = gMC->Edep();
- step = gMC->TrackStep();
-
- //
- // record hits when track enters ...
- if( gMC->IsTrackEntering()) {
-// gMC->SetMaxStep(fMaxStepGas);
- Double_t tc = mom[0]*mom[0]+mom[1]*mom[1];
- Double_t rt = TMath::Sqrt(tc);
- theta = Float_t(TMath::ATan2(rt,Double_t(mom[2])))*kRaddeg;
- phi = Float_t(TMath::ATan2(Double_t(mom[1]),Double_t(mom[0])))*kRaddeg;
-
-
- Double_t localTc = localMom[0]*localMom[0]+localMom[2]*localMom[2];
- Double_t localRt = TMath::Sqrt(localTc);
- localTheta = Float_t(TMath::ATan2(localRt,Double_t(localMom[1])))*kRaddeg;
- localPhi = Float_t(TMath::ATan2(Double_t(localMom[2]),Double_t(localMom[0])))*kRaddeg;
-
- hits[0] = Float_t(ipart); // particle type
- hits[1] = localPos[0]; // X-position for hit
- hits[2] = localPos[1]; // Y-position for hit
- hits[3] = localPos[2]; // Z-position for hit
- hits[4] = localTheta; // theta angle of incidence
- hits[5] = localPhi; // phi angle of incidence
- hits[8] = (Float_t) fNSDigits; // first sdigit
- hits[9] = -1; // last pad hit
- hits[13] = fFreonProd; // did id hit the freon?
- hits[14] = mom[0];
- hits[15] = mom[1];
- hits[16] = mom[2];
- hits[18] = 0; // dummy cerenkov angle
-
- tlength = 0;
- eloss = 0;
- fFreonProd = 0;
-
- Chamber(idvol).LocaltoGlobal(localPos,hits+1);
-
-
- //To make chamber coordinates x-y had to pass localPos[0], localPos[2]
- xhit = localPos[0];
- yhit = localPos[2];
- // Only if not trigger chamber
- if(idvol<kNCH) {
- //
- // Initialize hit position (cursor) in the segmentation model
- //PH ((AliRICHChamber*) (*fChambers)[idvol])
- ((AliRICHChamber*)fChambers->At(idvol))
- ->SigGenInit(localPos[0], localPos[2], localPos[1]);
- }
- }
-
- //
- // Calculate the charge induced on a pad (disintegration) in case
- //
- // Mip left chamber ...
- if( gMC->IsTrackExiting() || gMC->IsTrackStop() || gMC->IsTrackDisappeared()){
- gMC->SetMaxStep(kBig);
- eloss += destep;
- tlength += step;
-
-
- // Only if not trigger chamber
- if(idvol<kNCH) {
- if (eloss > 0)
- {
- if(gMC->TrackPid() == kNeutron)
- printf("\n\n\n\n\n Neutron Making Pad Hit!!! \n\n\n\n");
- nPads = Hits2SDigits(xhit,yhit,eloss,idvol,kMip);
- hits[17] = nPads;
- //printf("nPads:%d",nPads);
- }
- }
-
- hits[6]=tlength;
- hits[7]=eloss;
- if (fNSDigits > (Int_t)hits[8]) {
- hits[8]= hits[8]+1;
- hits[9]= (Float_t) fNSDigits;
- }
-
- //if(sector !=-1)
- new(lhits[fNhits++]) AliRICHHit(fIshunt,gAlice->CurrentTrack(),vol,hits);
- eloss = 0;
- //
- // Check additional signal generation conditions
- // defined by the segmentation
- // model (boundary crossing conditions)
- } else if
- //PH (((AliRICHChamber*) (*fChambers)[idvol])
- (((AliRICHChamber*)fChambers->At(idvol))
- ->SigGenCond(localPos[0], localPos[2], localPos[1]))
- {
- //PH ((AliRICHChamber*) (*fChambers)[idvol])
- ((AliRICHChamber*)fChambers->At(idvol))
- ->SigGenInit(localPos[0], localPos[2], localPos[1]);
- if (eloss > 0)
- {
- if(gMC->TrackPid() == kNeutron)
- printf("\n\n\n\n\n Neutron Making Pad Hit!!! \n\n\n\n");
- nPads = Hits2SDigits(xhit,yhit,eloss,idvol,kMip);
- hits[17] = nPads;
- //printf("Npads:%d",NPads);
- }
- xhit = localPos[0];
- yhit = localPos[2];
- eloss = destep;
- tlength += step ;
- //
- // nothing special happened, add up energy loss
- } else {
- eloss += destep;
- tlength += step ;
- }
- }
- }
- /*************************************************End of MIP treatment**************************************/
- //}
-}//void AliRICH::StepManager()
-
-void AliRICH::FindClusters(Int_t nev,Int_t lastEntry)
-{
-
-//
-// Loop on chambers and on cathode planes
-//
- for (Int_t icat=1;icat<2;icat++) {
- gAlice->ResetDigits();
- gAlice->TreeD()->GetEvent(0);
- for (Int_t ich=0;ich<kNCH;ich++) {
- //PH AliRICHChamber* iChamber=(AliRICHChamber*) (*fChambers)[ich];
- AliRICHChamber* iChamber=(AliRICHChamber*)fChambers->At(ich);
- TClonesArray *pRICHdigits = this->DigitsAddress(ich);
- if (pRICHdigits == 0)
- continue;
- //
- // Get ready the current chamber stuff
- //
- AliRICHResponse* response = iChamber->GetResponseModel();
- AliSegmentation* seg = iChamber->GetSegmentationModel();
- AliRICHClusterFinder* rec = iChamber->GetReconstructionModel();
- if (seg) {
- rec->SetSegmentation(seg);
- rec->SetResponse(response);
- rec->SetDigits(pRICHdigits);
- rec->SetChamber(ich);
- if (nev==0) rec->CalibrateCOG();
- rec->FindRawClusters();
- }
- TClonesArray *fRch;
- fRch=RawClustAddress(ich);
- fRch->Sort();
- } // for ich
-
- gAlice->TreeR()->Fill();
- TClonesArray *fRch;
- for (int i=0;i<kNCH;i++) {
- fRch=RawClustAddress(i);
- int nraw=fRch->GetEntriesFast();
- printf ("Chamber %d, raw clusters %d\n",i,nraw);
- }
-
- ResetRawClusters();
-
- } // for icat
-
- char hname[30];
- sprintf(hname,"TreeR%d",nev);
- gAlice->TreeR()->Write(hname,kOverwrite,0);
- gAlice->TreeR()->Reset();
-
- //gObjectTable->Print();
-}
-
-AliRICHSDigit* AliRICH::FirstPad(AliRICHHit* hit,TClonesArray *clusters )
-{
-//
- // Initialise the pad iterator
- // Return the address of the first sdigit for hit
- TClonesArray *theClusters = clusters;
- Int_t nclust = theClusters->GetEntriesFast();
- if (nclust && hit->PHlast() > 0) {
- sMaxIterPad=Int_t(hit->PHlast());
- sCurIterPad=Int_t(hit->PHfirst());
- return (AliRICHSDigit*) clusters->UncheckedAt(sCurIterPad-1);
- } else {
- return 0;
- }
-
-}
-
-AliRICHSDigit* AliRICH::NextPad(TClonesArray *clusters)
-{
-
- // Iterates over pads
+ branch=fLoader->TreeD()->GetBranch(Form("%sDigits%d",GetName(),i+1));
+ if(branch){CreateDigitsOld(); branch->SetAddress(&((*fDchambers)[i]));}
+ }//for
+ }//D
+
+ if(fLoader->TreeR()){//R
+ if(GetDebug())Info("SetTreeAddress","tree R is requested.");
+
+ for(int i=0;i<kNCH;i++){
+ branch=fLoader->TreeR()->GetBranch(Form("%sClusters%d" ,GetName(),i+1));
+ if(branch){CreateClusters(); branch->SetAddress(&((*fRawClusters)[i]));}
+ }
+
+ for(int i=0;i<kNCH;i++) {
+ branch=fLoader->TreeR()->GetBranch(Form("%sRawClusters%d" ,GetName(),i+1));
+ if(branch){CreateRawClustersOld(); branch->SetAddress(&((*fRawClusters)[i]));}
+ }
+ }//R
+ if(GetDebug())Info("SetTreeAddress","Stop.");
+}//void AliRICH::SetTreeAddress()
+//__________________________________________________________________________________________________
+void AliRICH::Print(Option_t *option)const
+{
+ TObject::Print(option);
+ Param()->Dump();
+ fChambers->Print(option);
+}//void AliRICH::Print(Option_t *option)const
+//__________________________________________________________________________________________________
+void AliRICH::CreateGeometry()
+{//Creates detailed geometry simulation (currently GEANT volumes tree)
+ if(GetDebug())Info("CreateGeometry","Start.");
+//Opaque quartz thickness
+ Float_t oqua_thickness = .5;
+//CsI dimensions
+ Float_t pcX=Param()->PcSizeX();
+ Float_t pcY=Param()->PcSizeY();
- sCurIterPad++;
- if (sCurIterPad <= sMaxIterPad) {
- return (AliRICHSDigit*) clusters->UncheckedAt(sCurIterPad-1);
- } else {
- return 0;
- }
-}
-
-AliRICH& AliRICH::operator=(const AliRICH& rhs)
-{
-// Assignment operator
- return *this;
+ Int_t *idtmed = fIdtmed->GetArray()-999;
-}
-
-void AliRICH::DiagnosticsFE(Int_t evNumber1,Int_t evNumber2)
-{
-
- Int_t NpadX = 162; // number of pads on X
- Int_t NpadY = 162; // number of pads on Y
-
- Int_t Pad[162][162];
- for (Int_t i=0;i<NpadX;i++) {
- for (Int_t j=0;j<NpadY;j++) {
- Pad[i][j]=0;
- }
+ Int_t i;
+ Float_t zs;
+ Int_t idrotm[1099];
+ Float_t par[3];
+
+//External aluminium box
+ par[0]=68.8*kcm;par[1]=13*kcm;par[2]=70.86*kcm; gMC->Gsvolu("RICH", "BOX ", idtmed[1009], par, 3);
+//Air
+ par[0]=66.3; par[1] = 13; par[2] = 68.35; gMC->Gsvolu("SRIC", "BOX ", idtmed[1000], par, 3);
+//Air 2 (cutting the lower part of the box)
+ par[0]=1.25; par[1] = 3; par[2] = 70.86; gMC->Gsvolu("AIR2", "BOX ", idtmed[1000], par, 3);
+//Air 3 (cutting the lower part of the box)
+ par[0]=66.3; par[1] = 3; par[2] = 1.2505; gMC->Gsvolu("AIR3", "BOX ", idtmed[1000], par, 3);
+//Honeycomb
+ par[0]=66.3;par[1]=0.188; par[2] = 68.35; gMC->Gsvolu("HONE", "BOX ", idtmed[1001], par, 3);
+//Aluminium sheet
+ par[0]=66.3;par[1]=0.025;par[2]=68.35; gMC->Gsvolu("ALUM", "BOX ", idtmed[1009], par, 3);
+ //par[0] = 66.5; par[1] = .025; par[2] = 63.1;
+//Quartz
+ par[0]=Param()->QuartzWidth()/2;par[1]=Param()->QuartzThickness()/2;par[2]=Param()->QuartzLength()/2;
+ gMC->Gsvolu("QUAR", "BOX ", idtmed[1002], par, 3);
+//Spacers (cylinders)
+ par[0]=0.;par[1]=.5;par[2]=Param()->FreonThickness()/2; gMC->Gsvolu("SPAC", "TUBE", idtmed[1002], par, 3);
+//Feet (freon slabs supports)
+ par[0] = .7; par[1] = .3; par[2] = 1.9; gMC->Gsvolu("FOOT", "BOX", idtmed[1009], par, 3);
+//Opaque quartz
+ par[0]=Param()->QuartzWidth()/2;par[1]= .2;par[2]=Param()->QuartzLength()/2;
+ gMC->Gsvolu("OQUA", "BOX ", idtmed[1007], par, 3);
+//Frame of opaque quartz
+ par[0]=Param()->OuterFreonWidth()/2;par[1]=Param()->FreonThickness()/2;par[2]=Param()->OuterFreonLength()/2;
+ gMC->Gsvolu("OQF1", "BOX ", idtmed[1007], par, 3);
+ par[0]=Param()->InnerFreonWidth()/2;par[1]=Param()->FreonThickness()/2;par[2]=Param()->InnerFreonLength()/2;
+ gMC->Gsvolu("OQF2", "BOX ", idtmed[1007], par, 3);
+//Freon
+ par[0]=Param()->OuterFreonWidth()/2 - oqua_thickness;
+ par[1]=Param()->FreonThickness()/2;
+ par[2]=Param()->OuterFreonLength()/2 - 2*oqua_thickness;
+ gMC->Gsvolu("FRE1", "BOX ", idtmed[1003], par, 3);
+
+ par[0]=Param()->InnerFreonWidth()/2 - oqua_thickness;
+ par[1]=Param()->FreonThickness()/2;
+ par[2]=Param()->InnerFreonLength()/2 - 2*oqua_thickness;
+ gMC->Gsvolu("FRE2", "BOX ", idtmed[1003], par, 3);
+//Methane
+ par[0]=pcX/2;par[1]=Param()->GapThickness()/2;par[2]=pcY/2; gMC->Gsvolu("META","BOX ",idtmed[1004], par, 3);
+//Methane gap
+ par[0]=pcX/2;par[1]=Param()->ProximityGapThickness()/2;par[2]=pcY/2;gMC->Gsvolu("GAP ","BOX ",(*fIdtmed)[kGAP],par,3);
+//CsI PC
+ par[0]=pcX/2;par[1]=.25;par[2]=pcY/2; gMC->Gsvolu("CSI ", "BOX ", (*fIdtmed)[kCSI], par, 3);
+//Anode grid
+ par[0] = 0.;par[1] = .001;par[2] = 20.; gMC->Gsvolu("GRID", "TUBE", idtmed[1006], par, 3);
+
+//Wire supports
+//Bar of metal
+ par[0]=pcX/2;par[1]=1.05;par[2]=1.05; gMC->Gsvolu("WSMe", "BOX ", idtmed[1009], par, 3);
+//Ceramic pick up (base)
+ par[0]=pcX/2;par[1]= .25;par[2]=1.05; gMC->Gsvolu("WSG1", "BOX ", idtmed[1010], par, 3);
+//Ceramic pick up (head)
+ par[0] = pcX/2;par[1] = .1;par[2] = .1; gMC->Gsvolu("WSG2", "BOX ", idtmed[1010], par, 3);
+
+//Aluminium supports for methane and CsI
+//Short bar
+ par[0]=pcX/2;par[1]=Param()->GapThickness()/2 + .25; par[2] = (68.35 - pcY/2)/2;
+ gMC->Gsvolu("SMSH", "BOX", idtmed[1009], par, 3);
+//Long bar
+ par[0]=(66.3 - pcX/2)/2;par[1]=Param()->GapThickness()/2+.25;par[2]=pcY/2+68.35-pcY/2;
+ gMC->Gsvolu("SMLG", "BOX", idtmed[1009], par, 3);
+
+//Aluminium supports for freon
+//Short bar
+ par[0] = Param()->QuartzWidth()/2; par[1] = .3; par[2] = (68.35 - Param()->QuartzLength()/2)/2;
+ gMC->Gsvolu("SFSH", "BOX", idtmed[1009], par, 3);
+//Long bar
+ par[0] = (66.3 - Param()->QuartzWidth()/2)/2; par[1] = .3;
+ par[2] = Param()->QuartzLength()/2 + 68.35 - Param()->QuartzLength()/2;
+ gMC->Gsvolu("SFLG", "BOX", idtmed[1009], par, 3);
+//PCB backplane
+ par[0] = pcX/2;par[1] = .25; par[2] = pcY/4 -.5025; gMC->Gsvolu("PCB ", "BOX", idtmed[1011], par, 3);
+
+//Backplane supports
+//Aluminium slab
+ par[0] = 33.15;par[1] = 2;par[2] = 21.65; gMC->Gsvolu("BACK", "BOX", idtmed[1009], par, 3);
+//Big hole
+ par[0] = 9.05; par[1] = 2; par[2] = 4.4625; gMC->Gsvolu("BKHL", "BOX", idtmed[1000], par, 3);
+//Small hole
+ par[0] = 5.7;par[1] = 2;par[2] = 4.4625; gMC->Gsvolu("BKHS", "BOX", idtmed[1000], par, 3);
+//Place holes inside backplane support
+ gMC->Gspos("BKHS", 1, "BACK", .8 + 5.7,0., .6 + 4.4625, 0, "ONLY");
+ gMC->Gspos("BKHS", 2, "BACK", -.8 - 5.7,0., .6 + 4.4625, 0, "ONLY");
+ gMC->Gspos("BKHS", 3, "BACK", .8 + 5.7,0., -.6 - 4.4625, 0, "ONLY");
+ gMC->Gspos("BKHS", 4, "BACK", -.8 - 5.7,0., -.6 - 4.4625, 0, "ONLY");
+ gMC->Gspos("BKHS", 5, "BACK", .8 + 5.7,0., .6 + 8.925 + 1.2 + 4.4625, 0, "ONLY");
+ gMC->Gspos("BKHS", 6, "BACK", -.8 - 5.7,0., .6 + 8.925 + 1.2 + 4.4625, 0, "ONLY");
+ gMC->Gspos("BKHS", 7, "BACK", .8 + 5.7,0., -.6 - 8.925 - 1.2 - 4.4625, 0, "ONLY");
+ gMC->Gspos("BKHS", 8, "BACK", -.8 - 5.7,0., -.6 - 8.925 - 1.2 - 4.4625, 0, "ONLY");
+ gMC->Gspos("BKHL", 1, "BACK", .8 + 11.4 + 1.6 + 9.05, 0., .6 + 4.4625, 0, "ONLY");
+ gMC->Gspos("BKHL", 2, "BACK", -.8 - 11.4 - 1.6 - 9.05, 0., .6 + 4.4625, 0, "ONLY");
+ gMC->Gspos("BKHL", 3, "BACK", .8 + 11.4 + 1.6 + 9.05, 0., -.6 - 4.4625, 0, "ONLY");
+ gMC->Gspos("BKHL", 4, "BACK", -.8 - 11.4 - 1.6 - 9.05, 0., -.6 - 4.4625, 0, "ONLY");
+ gMC->Gspos("BKHL", 5, "BACK", .8 + 11.4+ 1.6 + 9.05, 0., .6 + 8.925 + 1.2 + 4.4625, 0, "ONLY");
+ gMC->Gspos("BKHL", 6, "BACK", -.8 - 11.4 - 1.6 - 9.05, 0., .6 + 8.925 + 1.2 + 4.4625, 0, "ONLY");
+ gMC->Gspos("BKHL", 7, "BACK", .8 + 11.4 + 1.6 + 9.05, 0., -.6 - 8.925 - 1.2 - 4.4625, 0, "ONLY");
+ gMC->Gspos("BKHL", 8, "BACK", -.8 - 11.4 - 1.6 - 9.05, 0., -.6 - 8.925 - 1.2 - 4.4625, 0, "ONLY");
+//Place material inside RICH
+ gMC->Gspos("SRIC", 1, "RICH", 0.,0., 0., 0, "ONLY");
+ gMC->Gspos("AIR2", 1, "RICH", 66.3 + 1.2505, 1.276-Param()->GapThickness()/2-Param()->QuartzThickness()-Param()->FreonThickness()- .4 - .6 - .05 - .376 -.5 - 3.35, 0., 0, "ONLY");
+ gMC->Gspos("AIR2", 2, "RICH", -66.3 - 1.2505,1.276-Param()->GapThickness()/2-Param()->QuartzThickness()-Param()->FreonThickness()- .4 - .6 - .05 - .376 -.5 - 3.35, 0., 0, "ONLY");
+ gMC->Gspos("AIR3", 1, "RICH", 0., 1.276-Param()->GapThickness()/2 - Param()->QuartzThickness() - Param()->FreonThickness()- .4 - .6 - .05 - .376 -.5 - 3.35, -68.35 - 1.25, 0, "ONLY");
+ gMC->Gspos("AIR3", 2, "RICH", 0., 1.276 - Param()->GapThickness()/2 - Param()->QuartzThickness() - Param()->FreonThickness()- .4 - .6 - .05 - .376 -.5 - 3.35, 68.35 + 1.25, 0, "ONLY");
+ gMC->Gspos("ALUM", 1, "SRIC", 0., 1.276 - Param()->GapThickness()/2 - Param()->QuartzThickness() - Param()->FreonThickness()- .4 - .6 - .05 - .376 -.025, 0., 0, "ONLY");
+ gMC->Gspos("HONE", 1, "SRIC", 0., 1.276- Param()->GapThickness()/2 - Param()->QuartzThickness() - Param()->FreonThickness()- .4 - .6 - .05 - .188, 0., 0, "ONLY");
+ gMC->Gspos("ALUM", 2, "SRIC", 0., 1.276 - Param()->GapThickness()/2 - Param()->QuartzThickness() - Param()->FreonThickness()- .4 - .6 - .025, 0., 0, "ONLY");
+ gMC->Gspos("FOOT", 1, "SRIC", 64.95, 1.276 - Param()->GapThickness()/2 - Param()->QuartzThickness() - Param()->FreonThickness()- .4 - .3, 36.9, 0, "ONLY");
+ gMC->Gspos("FOOT", 2, "SRIC", 21.65, 1.276 - Param()->GapThickness()/2 - Param()->QuartzThickness() - Param()->FreonThickness()- .4 - .3 , 36.9, 0, "ONLY");
+ gMC->Gspos("FOOT", 3, "SRIC", -21.65, 1.276 - Param()->GapThickness()/2 - Param()->QuartzThickness() - Param()->FreonThickness()- .4 - .3, 36.9, 0, "ONLY");
+ gMC->Gspos("FOOT", 4, "SRIC", -64.95, 1.276 - Param()->GapThickness()/2 - Param()->QuartzThickness() - Param()->FreonThickness()- .4 - .3, 36.9, 0, "ONLY");
+ gMC->Gspos("FOOT", 5, "SRIC", 64.95, 1.276 - Param()->GapThickness()/2 - Param()->QuartzThickness() - Param()->FreonThickness()- .4 - .3, -36.9, 0, "ONLY");
+ gMC->Gspos("FOOT", 6, "SRIC", 21.65, 1.276 - Param()->GapThickness()/2 - Param()->QuartzThickness() - Param()->FreonThickness()- .4 - .3, -36.9, 0, "ONLY");
+ gMC->Gspos("FOOT", 7, "SRIC", -21.65, 1.276 - Param()->GapThickness()/2 - Param()->QuartzThickness() - Param()->FreonThickness()- .4 - .3, -36.9, 0, "ONLY");
+ gMC->Gspos("FOOT", 8, "SRIC", -64.95, 1.276 - Param()->GapThickness()/2 - Param()->QuartzThickness() - Param()->FreonThickness()- .4 - .3, -36.9, 0, "ONLY");
+ gMC->Gspos("OQUA", 1, "SRIC", 0., 1.276 - Param()->GapThickness()/2 - Param()->QuartzThickness() - Param()->FreonThickness()- .2, 0., 0, "ONLY");
+// Methane supports
+ gMC->Gspos("SMLG", 1, "SRIC", pcX/2 + (66.3 - pcX/2)/2, 1.276 + .25, 0., 0, "ONLY");
+ gMC->Gspos("SMLG", 2, "SRIC", - pcX/2 - (66.3 - pcX/2)/2, 1.276 + .25, 0., 0, "ONLY");
+ gMC->Gspos("SMSH", 1, "SRIC", 0., 1.276 + .25, pcY/2 + (68.35 - pcY/2)/2, 0, "ONLY");
+ gMC->Gspos("SMSH", 2, "SRIC", 0., 1.276 + .25, - pcY/2 - (68.35 - pcY/2)/2, 0, "ONLY");
+//Freon supports
+ Float_t supp_y = 1.276 - Param()->GapThickness()/2- Param()->QuartzThickness() -Param()->FreonThickness() - .2 + .3; //y position of freon supports
+ gMC->Gspos("SFLG", 1, "SRIC", Param()->QuartzWidth()/2 + (66.3 - Param()->QuartzWidth()/2)/2, supp_y, 0., 0, "ONLY");
+ gMC->Gspos("SFLG", 2, "SRIC", - Param()->QuartzWidth()/2 - (66.3 - Param()->QuartzWidth()/2)/2, supp_y, 0., 0, "ONLY");
+ gMC->Gspos("SFSH", 1, "SRIC", 0., supp_y, Param()->QuartzLength()/2 + (68.35 - Param()->QuartzLength()/2)/2, 0, "ONLY");
+ gMC->Gspos("SFSH", 2, "SRIC", 0., supp_y, - Param()->QuartzLength()/2 - (68.35 - Param()->QuartzLength()/2)/2, 0, "ONLY");
+ AliMatrix(idrotm[1019], 0., 0., 90., 0., 90., 90.);
+//Place spacers
+ Int_t nspacers = 30;
+ for (i = 0; i < nspacers/3; i++) {
+ zs = -11.6/2 + (TMath::Abs(nspacers/6) - i) * 12.2;
+ gMC->Gspos("SPAC", i, "FRE1", 10.5, 0., zs, idrotm[1019], "ONLY"); //Original settings
+ }
+ for (i = nspacers/3; i < (nspacers*2)/3; i++) {
+ zs = -11.6/2 + (nspacers/3 + TMath::Abs(nspacers/6) - i) * 12.2;
+ gMC->Gspos("SPAC", i, "FRE1", 0, 0., zs, idrotm[1019], "ONLY"); //Original settings
+ }
+ for (i = (nspacers*2)/3; i < nspacers; ++i) {
+ zs = -11.6/2 + ((nspacers*2)/3 + TMath::Abs(nspacers/6) - i) * 12.2;
+ gMC->Gspos("SPAC", i, "FRE1", -10.5, 0., zs, idrotm[1019], "ONLY"); //Original settings
+ }
+ for (i = 0; i < nspacers/3; i++) {
+ zs = -11.6/2 + (TMath::Abs(nspacers/6) - i) * 12.2;
+ gMC->Gspos("SPAC", i, "FRE2", 10.5, 0., zs, idrotm[1019], "ONLY"); //Original settings
+ }
+ for (i = nspacers/3; i < (nspacers*2)/3; i++) {
+ zs = -11.6/2 + (nspacers/3 + TMath::Abs(nspacers/6) - i) * 12.2;
+ gMC->Gspos("SPAC", i, "FRE2", 0, 0., zs, idrotm[1019], "ONLY"); //Original settings
+ }
+ for (i = (nspacers*2)/3; i < nspacers; ++i) {
+ zs = -11.6/2 + ((nspacers*2)/3 + TMath::Abs(nspacers/6) - i) * 12.2;
+ gMC->Gspos("SPAC", i, "FRE2", -10.5, 0., zs, idrotm[1019], "ONLY"); //Original settings
+ }
+ gMC->Gspos("FRE1", 1, "OQF1", 0., 0., 0., 0, "ONLY");
+ gMC->Gspos("FRE2", 1, "OQF2", 0., 0., 0., 0, "ONLY");
+ gMC->Gspos("OQF1", 1, "SRIC", Param()->OuterFreonWidth()/2 + Param()->InnerFreonWidth()/2 + 2, 1.276 - Param()->GapThickness()/2- Param()->QuartzThickness() -Param()->FreonThickness()/2, 0., 0, "ONLY"); //Original settings (31.3)
+ gMC->Gspos("OQF2", 2, "SRIC", 0., 1.276 - Param()->GapThickness()/2 - Param()->QuartzThickness() - Param()->FreonThickness()/2, 0., 0, "ONLY"); //Original settings
+ gMC->Gspos("OQF1", 3, "SRIC", - (Param()->OuterFreonWidth()/2 + Param()->InnerFreonWidth()/2) - 2, 1.276 - Param()->GapThickness()/2 - Param()->QuartzThickness() - Param()->FreonThickness()/2, 0., 0, "ONLY"); //Original settings (-31.3)
+ gMC->Gspos("QUAR", 1, "SRIC", 0., 1.276 - Param()->GapThickness()/2 - Param()->QuartzThickness()/2, 0., 0, "ONLY");
+ gMC->Gspos("GAP ", 1, "META", 0., Param()->GapThickness()/2 - Param()->ProximityGapThickness()/2 - 0.0001, 0., 0, "ONLY");
+ gMC->Gspos("META", 1, "SRIC", 0., 1.276, 0., 0, "ONLY");
+ gMC->Gspos("CSI ", 1, "SRIC", 0., 1.276 + Param()->GapThickness()/2 + .25, 0., 0, "ONLY");
+//Wire support placing
+ gMC->Gspos("WSG2", 1, "GAP ", 0., Param()->ProximityGapThickness()/2 - .1, 0., 0, "ONLY");
+ gMC->Gspos("WSG1", 1, "CSI ", 0., 0., 0., 0, "ONLY");
+ gMC->Gspos("WSMe", 1, "SRIC ", 0., 1.276 + Param()->GapThickness()/2 + .5 + 1.05, 0., 0, "ONLY");
+//Backplane placing
+ gMC->Gspos("BACK", 1, "SRIC ", -33.15, 1.276 + Param()->GapThickness()/2 + .5 + 2.1 + 2, 43.3, 0, "ONLY");
+ gMC->Gspos("BACK", 2, "SRIC ", 33.15, 1.276 + Param()->GapThickness()/2 + .5 + 2.1 + 2 , 43.3, 0, "ONLY");
+ gMC->Gspos("BACK", 3, "SRIC ", -33.15, 1.276 + Param()->GapThickness()/2 + .5 + 2.1 + 2, 0., 0, "ONLY");
+ gMC->Gspos("BACK", 4, "SRIC ", 33.15, 1.276 + Param()->GapThickness()/2 + .5 + 2.1 + 2, 0., 0, "ONLY");
+ gMC->Gspos("BACK", 5, "SRIC ", 33.15, 1.276 + Param()->GapThickness()/2 + .5 + 2.1 + 2, -43.3, 0, "ONLY");
+ gMC->Gspos("BACK", 6, "SRIC ", -33.15, 1.276 + Param()->GapThickness()/2 + .5 + 2.1 + 2, -43.3, 0, "ONLY");
+//PCB placing
+ gMC->Gspos("PCB ", 1, "SRIC ", 0., 1.276 + Param()->GapThickness()/2 + .5 + 1.05, pcX/4 + .5025 + 2.5, 0, "ONLY");
+ gMC->Gspos("PCB ", 2, "SRIC ", 0., 1.276 + Param()->GapThickness()/2 + .5 + 1.05, -pcX/4 - .5025 - 2.5, 0, "ONLY");
+
+//place chambers into mother volume ALIC
+ for(int i=1;i<=kNCH;i++){
+ AliMatrix(idrotm[1000+i],C(i)->ThetaXd(),C(i)->PhiXd(),
+ C(i)->ThetaYd(),C(i)->PhiYd(),
+ C(i)->ThetaZd(),C(i)->PhiZd());
+ gMC->Gspos("RICH",i,"ALIC",C(i)->X(),C(i)->Y(),C(i)->Z(),idrotm[1000+i], "ONLY");
}
-
- // Create some histograms
-
- TH1F *pionspectra1 = new TH1F("pionspectra1","Pion Spectra",200,-4,2);
- TH1F *pionspectra2 = new TH1F("pionspectra2","Pion Spectra",200,-4,2);
- TH1F *pionspectra3 = new TH1F("pionspectra3","Pion Spectra",200,-4,2);
- TH1F *protonspectra1 = new TH1F("protonspectra1","Proton Spectra",200,-4,2);
- TH1F *protonspectra2 = new TH1F("protonspectra2","Proton Spectra",200,-4,2);
- TH1F *protonspectra3 = new TH1F("protonspectra3","Proton Spectra",200,-4,2);
- TH1F *kaonspectra1 = new TH1F("kaonspectra1","Kaon Spectra",100,-4,2);
- TH1F *kaonspectra2 = new TH1F("kaonspectra2","Kaon Spectra",100,-4,2);
- TH1F *kaonspectra3 = new TH1F("kaonspectra3","Kaon Spectra",100,-4,2);
- TH1F *electronspectra1 = new TH1F("electronspectra1","Electron Spectra",100,-4,2);
- TH1F *electronspectra2 = new TH1F("electronspectra2","Electron Spectra",100,-4,2);
- TH1F *electronspectra3 = new TH1F("electronspectra3","Electron Spectra",100,-4,2);
- TH1F *muonspectra1 = new TH1F("muonspectra1","Muon Spectra",100,-4,2);
- TH1F *muonspectra2 = new TH1F("muonspectra2","Muon Spectra",100,-4,2);
- TH1F *muonspectra3 = new TH1F("muonspectra3","Muon Spectra",100,-4,2);
- TH1F *neutronspectra1 = new TH1F("neutronspectra1","Neutron Spectra",100,-4,2);
- TH1F *neutronspectra2 = new TH1F("neutronspectra2","Neutron Spectra",100,-4,2);
- TH1F *neutronspectra3 = new TH1F("neutronspectra2","Neutron Spectra",100,-4,2);
- TH1F *chargedspectra1 = new TH1F("chargedspectra1","Charged particles above 1 GeV Spectra",100,-1,3);
- TH1F *chargedspectra2 = new TH1F("chargedspectra2","Charged particles above 1 GeV Spectra",100,-1,3);
- TH1F *chargedspectra3 = new TH1F("chargedspectra2","Charged particles above 1 GeV Spectra",100,-1,3);
- TH1F *pionptspectrafinal = new TH1F("pionptspectrafinal","Primary Pions Transverse Momenta at HMPID",20,0,5);
- TH1F *pionptspectravertex = new TH1F("pionptspectravertex","Primary Pions Transverse Momenta at vertex",20,0,5);
- TH1F *kaonptspectrafinal = new TH1F("kaonptspectrafinal","Primary Kaons Transverse Momenta at HMPID",20,0,5);
- TH1F *kaonptspectravertex = new TH1F("kaonptspectravertex","Primary Kaons Transverse Momenta at vertex",20,0,5);
- //TH1F *hitsPhi = new TH1F("hitsPhi","Distribution of phi angle of incidence",100,-180,180);
- TH1F *hitsTheta = new TH1F("hitsTheta","Distribution of Theta angle of incidence, all tracks",100,0,50);
- TH1F *hitsTheta500MeV = new TH1F("hitsTheta500MeV","Distribution of Theta angle of incidence, 0.5-1 GeV primary tracks",100,0,50);
- TH1F *hitsTheta1GeV = new TH1F("hitsTheta1GeV","Distribution of Theta angle of incidence, 1-2 GeV primary tracks",100,0,50);
- TH1F *hitsTheta2GeV = new TH1F("hitsTheta2GeV","Distribution of Theta angle of incidence, 2-3 GeV primary tracks",100,0,50);
- TH1F *hitsTheta3GeV = new TH1F("hitsTheta3GeV","Distribution of Theta angle of incidence, >3 GeV primary tracks",100,0,50);
- TH2F *production = new TH2F("production","Mother production vertices",100,-300,300,100,0,600);
-
-
-
-
-// Start loop over events
-
- Int_t pion=0, kaon=0, proton=0, electron=0, positron=0, neutron=0, highneutrons=0, muon=0;
- Int_t chargedpions=0,primarypions=0,highprimarypions=0,chargedkaons=0,primarykaons=0,highprimarykaons=0;
- Int_t photons=0, primaryphotons=0, highprimaryphotons=0;
- TRandom* random=0;
-
- for (int nev=0; nev<= evNumber2; nev++) {
- Int_t nparticles = gAlice->GetEvent(nev);
-
-
- printf ("Event number : %d\n",nev);
- printf ("Number of particles: %d\n",nparticles);
- if (nev < evNumber1) continue;
- if (nparticles <= 0) return;
-
-// Get pointers to RICH detector and Hits containers
-
- AliRICH *pRICH = (AliRICH *) gAlice->GetDetector("RICH");
-
- TTree *treeH = TreeH();
- Int_t ntracks =(Int_t) treeH->GetEntries();
-
-// Start loop on tracks in the hits containers
-
- for (Int_t track=0; track<ntracks;track++) {
- printf ("Processing Track: %d\n",track);
- gAlice->ResetHits();
- treeH->GetEvent(track);
-
- for(AliRICHHit* mHit=(AliRICHHit*)pRICH->FirstHit(-1);
- mHit;
- mHit=(AliRICHHit*)pRICH->NextHit())
- {
- //Int_t nch = mHit->fChamber; // chamber number
- //Float_t x = mHit->X(); // x-pos of hit
- //Float_t y = mHit->Z(); // y-pos
- //Float_t z = mHit->Y();
- //Float_t phi = mHit->Phi(); //Phi angle of incidence
- Float_t theta = mHit->Theta(); //Theta angle of incidence
- Float_t px = mHit->MomX();
- Float_t py = mHit->MomY();
- Int_t index = mHit->Track();
- Int_t particle = (Int_t)(mHit->Particle());
- Float_t R;
- Float_t PTfinal;
- Float_t PTvertex;
-
- TParticle *current = gAlice->Particle(index);
-
- //Float_t energy=current->Energy();
-
- R=TMath::Sqrt(current->Vx()*current->Vx() + current->Vy()*current->Vy());
- PTfinal=TMath::Sqrt(px*px + py*py);
- PTvertex=TMath::Sqrt(current->Px()*current->Px() + current->Py()*current->Py());
-
-
-
- if (TMath::Abs(particle) < 10000000)
- {
- hitsTheta->Fill(theta,(float) 1);
- if (R<5)
- {
- if (PTvertex>.5 && PTvertex<=1)
- {
- hitsTheta500MeV->Fill(theta,(float) 1);
- }
- if (PTvertex>1 && PTvertex<=2)
- {
- hitsTheta1GeV->Fill(theta,(float) 1);
- }
- if (PTvertex>2 && PTvertex<=3)
- {
- hitsTheta2GeV->Fill(theta,(float) 1);
- }
- if (PTvertex>3)
- {
- hitsTheta3GeV->Fill(theta,(float) 1);
- }
- }
-
- }
-
- //if (nch == 3)
- //{
-
- //printf("Particle type: %d\n",current->GetPdgCode());
- if (TMath::Abs(particle) < 50000051)
- {
- //if (TMath::Abs(particle) == 50000050 || TMath::Abs(particle) == 2112)
- if (TMath::Abs(particle) == 2112 || TMath::Abs(particle) == 50000050)
- {
- //gMC->Rndm(&random, 1);
- if (random->Rndm() < .1)
- production->Fill(current->Vz(),R,(float) 1);
- if (TMath::Abs(particle) == 50000050)
- //if (TMath::Abs(particle) > 50000000)
- {
- photons +=1;
- if (R<5)
- {
- primaryphotons +=1;
- if (current->Energy()>0.001)
- highprimaryphotons +=1;
- }
- }
- if (TMath::Abs(particle) == 2112)
- {
- neutron +=1;
- if (current->Energy()>0.0001)
- highneutrons +=1;
- }
- }
- if (TMath::Abs(particle) < 50000000)
- {
- production->Fill(current->Vz(),R,(float) 1);
- //printf("Adding %d at %f\n",particle,R);
- }
- //mip->Fill(x,y,(float) 1);
- }
-
- if (TMath::Abs(particle)==211 || TMath::Abs(particle)==111)
- {
- if (R<5)
- {
- pionptspectravertex->Fill(PTvertex,(float) 1);
- pionptspectrafinal->Fill(PTfinal,(float) 1);
- }
- }
-
- if (TMath::Abs(particle)==321 || TMath::Abs(particle)==130 || TMath::Abs(particle)==310
- || TMath::Abs(particle)==311)
- {
- if (R<5)
- {
- kaonptspectravertex->Fill(PTvertex,(float) 1);
- kaonptspectrafinal->Fill(PTfinal,(float) 1);
- }
- }
-
-
- if (TMath::Abs(particle)==211 || TMath::Abs(particle)==111)
- {
- pionspectra1->Fill(TMath::Log10(current->Energy() - current->GetCalcMass()),(float) 1);
- //printf ("fParticle: %d, PDG code:%d\n",particle,current->GetPdgCode());
- if (current->Vx()>5 && current->Vy()>5 && current->Vz()>5)
- pionspectra2->Fill(TMath::Log10(current->Energy() - current->GetCalcMass()),(float) 1);
- if (R>250 && R<450)
- {
- pionspectra3->Fill(TMath::Log10(current->Energy() - current->GetCalcMass()),(float) 1);
- //printf("\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\R:%f\n\n\n\n\n\n\n\n\n",R);
- }
- //printf("Pion mass: %e\n",current->GetCalcMass());
- pion +=1;
- if (TMath::Abs(particle)==211)
- {
- chargedpions +=1;
- if (R<5)
- {
- primarypions +=1;
- if (current->Energy()>1)
- highprimarypions +=1;
- }
- }
- }
- if (TMath::Abs(particle)==2212)
- {
- protonspectra1->Fill(TMath::Log10(current->Energy() - current->GetCalcMass()),(float) 1);
- //ptspectra->Fill(Pt,(float) 1);
- if (current->Vx()>5 && current->Vy()>5 && current->Vz()>5)
- protonspectra2->Fill(TMath::Log10(current->Energy() - current->GetCalcMass()),(float) 1);
- if (R>250 && R<450)
- protonspectra3->Fill(TMath::Log10(current->Energy() - current->GetCalcMass()),(float) 1);
- //printf("\n\n\n\n\n\n\nProton mass: %e\n\n\n\n\n\n\n\n\n",current->GetCalcMass());
- proton +=1;
- }
- if (TMath::Abs(particle)==321 || TMath::Abs(particle)==130 || TMath::Abs(particle)==310
- || TMath::Abs(particle)==311)
- {
- kaonspectra1->Fill(TMath::Log10(current->Energy() - current->GetCalcMass()),(float) 1);
- //ptspectra->Fill(Pt,(float) 1);
- if (current->Vx()>5 && current->Vy()>5 && current->Vz()>5)
- kaonspectra2->Fill(TMath::Log10(current->Energy() - current->GetCalcMass()),(float) 1);
- if (R>250 && R<450)
- kaonspectra3->Fill(TMath::Log10(current->Energy() - current->GetCalcMass()),(float) 1);
- //printf("Kaon mass: %e\n",current->GetCalcMass());
- kaon +=1;
- if (TMath::Abs(particle)==321)
- {
- chargedkaons +=1;
- if (R<5)
- {
- primarykaons +=1;
- if (current->Energy()>1)
- highprimarykaons +=1;
- }
- }
- }
- if (TMath::Abs(particle)==11)
- {
- electronspectra1->Fill(TMath::Log10(current->Energy() - current->GetCalcMass()),(float) 1);
- //ptspectra->Fill(Pt,(float) 1);
- if (current->Vx()>5 && current->Vy()>5 && current->Vz()>5)
- electronspectra2->Fill(TMath::Log10(current->Energy() - current->GetCalcMass()),(float) 1);
- if (R>250 && R<450)
- electronspectra3->Fill(TMath::Log10(current->Energy() - current->GetCalcMass()),(float) 1);
- //printf("Electron mass: %e\n",current->GetCalcMass());
- if (particle == 11)
- electron +=1;
- if (particle == -11)
- positron +=1;
- }
- if (TMath::Abs(particle)==13)
- {
- muonspectra1->Fill(TMath::Log10(current->Energy() - current->GetCalcMass()),(float) 1);
- //ptspectra->Fill(Pt,(float) 1);
- if (current->Vx()>5 && current->Vy()>5 && current->Vz()>5)
- muonspectra2->Fill(TMath::Log10(current->Energy() - current->GetCalcMass()),(float) 1);
- if (R>250 && R<450)
- muonspectra3->Fill(TMath::Log10(current->Energy() - current->GetCalcMass()),(float) 1);
- //printf("Muon mass: %e\n",current->GetCalcMass());
- muon +=1;
- }
- if (TMath::Abs(particle)==2112)
- {
- neutronspectra1->Fill(TMath::Log10(current->Energy() - current->GetCalcMass()),(float) 1);
- //ptspectra->Fill(Pt,(float) 1);
- if (current->Vx()>5 && current->Vy()>5 && current->Vz()>5)
- neutronspectra2->Fill(TMath::Log10(current->Energy() - current->GetCalcMass()),(float) 1);
- if (R>250 && R<450)
- {
- neutronspectra3->Fill(TMath::Log10(current->Energy() - current->GetCalcMass()),(float) 1);
- //printf("\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\R:%f\n\n\n\n\n\n\n\n\n",R);
- }
- //printf("Neutron mass: %e\n",current->GetCalcMass());
- neutron +=1;
- }
- if(TMath::Abs(particle)==211 || TMath::Abs(particle)==2212 || TMath::Abs(particle)==321)
- {
- if (current->Energy()-current->GetCalcMass()>1)
- {
- chargedspectra1->Fill(TMath::Log10(current->Energy() - current->GetCalcMass()),(float) 1);
- if (current->Vx()>5 && current->Vy()>5 && current->Vz()>5)
- chargedspectra2->Fill(TMath::Log10(current->Energy() - current->GetCalcMass()),(float) 1);
- if (R>250 && R<450)
- chargedspectra3->Fill(TMath::Log10(current->Energy() - current->GetCalcMass()),(float) 1);
- }
- }
- //printf("Hits:%d\n",hit);
- //printf ("Chamber number:%d x:%f y:%f\n",nch,x,y);
- // Fill the histograms
- //Nh1+=nhits;
- //h->Fill(x,y,(float) 1);
- //}
- //}
- }
-
- }
-
- }
- // }
-
- TStyle *mystyle=new TStyle("Plain","mystyle");
- mystyle->SetPalette(1,0);
- mystyle->cd();
-
- //Create canvases, set the view range, show histograms
-
- TCanvas *c2 = new TCanvas("c2","Angles of incidence",150,150,100,150);
- c2->Divide(2,2);
- //c2->SetFillColor(42);
-
- c2->cd(1);
- hitsTheta500MeV->SetFillColor(5);
- hitsTheta500MeV->Draw();
- c2->cd(2);
- hitsTheta1GeV->SetFillColor(5);
- hitsTheta1GeV->Draw();
- c2->cd(3);
- hitsTheta2GeV->SetFillColor(5);
- hitsTheta2GeV->Draw();
- c2->cd(4);
- hitsTheta3GeV->SetFillColor(5);
- hitsTheta3GeV->Draw();
-
-
-
- TCanvas *c15 = new TCanvas("c15","Mothers Production Vertices",50,50,600,600);
- c15->cd();
- production->SetFillColor(42);
- production->SetXTitle("z (m)");
- production->SetYTitle("R (m)");
- production->Draw();
-
- TCanvas *c10 = new TCanvas("c10","Pt Spectra",50,50,600,700);
- c10->Divide(2,2);
- c10->cd(1);
- pionptspectravertex->SetFillColor(5);
- pionptspectravertex->SetXTitle("Pt (GeV)");
- pionptspectravertex->Draw();
- c10->cd(2);
- pionptspectrafinal->SetFillColor(5);
- pionptspectrafinal->SetXTitle("Pt (GeV)");
- pionptspectrafinal->Draw();
- c10->cd(3);
- kaonptspectravertex->SetFillColor(5);
- kaonptspectravertex->SetXTitle("Pt (GeV)");
- kaonptspectravertex->Draw();
- c10->cd(4);
- kaonptspectrafinal->SetFillColor(5);
- kaonptspectrafinal->SetXTitle("Pt (GeV)");
- kaonptspectrafinal->Draw();
-
-
- TCanvas *c16 = new TCanvas("c16","Particles Spectra II",150,150,600,350);
- c16->Divide(2,1);
-
- c16->cd(1);
- //TCanvas *c13 = new TCanvas("c13","Electron Spectra",400,10,600,700);
- electronspectra1->SetFillColor(5);
- electronspectra1->SetXTitle("log(GeV)");
- electronspectra2->SetFillColor(46);
- electronspectra2->SetXTitle("log(GeV)");
- electronspectra3->SetFillColor(10);
- electronspectra3->SetXTitle("log(GeV)");
- //c13->SetLogx();
- electronspectra1->Draw();
- electronspectra2->Draw("same");
- electronspectra3->Draw("same");
-
- c16->cd(2);
- //TCanvas *c14 = new TCanvas("c14","Muon Spectra",400,10,600,700);
- muonspectra1->SetFillColor(5);
- muonspectra1->SetXTitle("log(GeV)");
- muonspectra2->SetFillColor(46);
- muonspectra2->SetXTitle("log(GeV)");
- muonspectra3->SetFillColor(10);
- muonspectra3->SetXTitle("log(GeV)");
- //c14->SetLogx();
- muonspectra1->Draw();
- muonspectra2->Draw("same");
- muonspectra3->Draw("same");
-
- //c16->cd(3);
- //TCanvas *c16 = new TCanvas("c16","Neutron Spectra",400,10,600,700);
- //neutronspectra1->SetFillColor(42);
- //neutronspectra1->SetXTitle("log(GeV)");
- //neutronspectra2->SetFillColor(46);
- //neutronspectra2->SetXTitle("log(GeV)");
- //neutronspectra3->SetFillColor(10);
- //neutronspectra3->SetXTitle("log(GeV)");
- //c16->SetLogx();
- //neutronspectra1->Draw();
- //neutronspectra2->Draw("same");
- //neutronspectra3->Draw("same");
-
- TCanvas *c9 = new TCanvas("c9","Particles Spectra",150,150,600,700);
- //TCanvas *c9 = new TCanvas("c9","Pion Spectra",400,10,600,700);
- c9->Divide(2,2);
-
- c9->cd(1);
- pionspectra1->SetFillColor(5);
- pionspectra1->SetXTitle("log(GeV)");
- pionspectra2->SetFillColor(46);
- pionspectra2->SetXTitle("log(GeV)");
- pionspectra3->SetFillColor(10);
- pionspectra3->SetXTitle("log(GeV)");
- //c9->SetLogx();
- pionspectra1->Draw();
- pionspectra2->Draw("same");
- pionspectra3->Draw("same");
-
- c9->cd(2);
- //TCanvas *c10 = new TCanvas("c10","Proton Spectra",400,10,600,700);
- protonspectra1->SetFillColor(5);
- protonspectra1->SetXTitle("log(GeV)");
- protonspectra2->SetFillColor(46);
- protonspectra2->SetXTitle("log(GeV)");
- protonspectra3->SetFillColor(10);
- protonspectra3->SetXTitle("log(GeV)");
- //c10->SetLogx();
- protonspectra1->Draw();
- protonspectra2->Draw("same");
- protonspectra3->Draw("same");
-
- c9->cd(3);
- //TCanvas *c11 = new TCanvas("c11","Kaon Spectra",400,10,600,700);
- kaonspectra1->SetFillColor(5);
- kaonspectra1->SetXTitle("log(GeV)");
- kaonspectra2->SetFillColor(46);
- kaonspectra2->SetXTitle("log(GeV)");
- kaonspectra3->SetFillColor(10);
- kaonspectra3->SetXTitle("log(GeV)");
- //c11->SetLogx();
- kaonspectra1->Draw();
- kaonspectra2->Draw("same");
- kaonspectra3->Draw("same");
-
- c9->cd(4);
- //TCanvas *c12 = new TCanvas("c12","Charged Particles Spectra",400,10,600,700);
- chargedspectra1->SetFillColor(5);
- chargedspectra1->SetXTitle("log(GeV)");
- chargedspectra2->SetFillColor(46);
- chargedspectra2->SetXTitle("log(GeV)");
- chargedspectra3->SetFillColor(10);
- chargedspectra3->SetXTitle("log(GeV)");
- //c12->SetLogx();
- chargedspectra1->Draw();
- chargedspectra2->Draw("same");
- chargedspectra3->Draw("same");
-
-
-
- printf("*****************************************\n");
- printf("* Particle * Counts *\n");
- printf("*****************************************\n");
-
- printf("* Pions: * %4d *\n",pion);
- printf("* Charged Pions: * %4d *\n",chargedpions);
- printf("* Primary Pions: * %4d *\n",primarypions);
- printf("* Primary Pions (p>1GeV/c): * %4d *\n",highprimarypions);
- printf("* Kaons: * %4d *\n",kaon);
- printf("* Charged Kaons: * %4d *\n",chargedkaons);
- printf("* Primary Kaons: * %4d *\n",primarykaons);
- printf("* Primary Kaons (p>1GeV/c): * %4d *\n",highprimarykaons);
- printf("* Muons: * %4d *\n",muon);
- printf("* Electrons: * %4d *\n",electron);
- printf("* Positrons: * %4d *\n",positron);
- printf("* Protons: * %4d *\n",proton);
- printf("* All Charged: * %4d *\n",(chargedpions+chargedkaons+muon+electron+positron+proton));
- printf("*****************************************\n");
- //printf("* Photons: * %3.1f *\n",photons);
- //printf("* Primary Photons: * %3.1f *\n",primaryphotons);
- //printf("* Primary Photons (p>1MeV/c):* %3.1f *\n",highprimaryphotons);
- //printf("*****************************************\n");
- //printf("* Neutrons: * %3.1f *\n",neutron);
- //printf("* Neutrons (p>100keV/c): * %3.1f *\n",highneutrons);
- //printf("*****************************************\n");
-
- if (gAlice->TreeD())
- {
- gAlice->TreeD()->GetEvent(0);
-
- Float_t occ[7];
- Float_t sum=0;
- Float_t mean=0;
- printf("\n*****************************************\n");
- printf("* Chamber * Digits * Occupancy *\n");
- printf("*****************************************\n");
-
- for (Int_t ich=0;ich<7;ich++)
- {
- TClonesArray *Digits = DigitsAddress(ich); // Raw clusters branch
- Int_t ndigits = Digits->GetEntriesFast();
- occ[ich] = Float_t(ndigits)/(160*144);
- sum += Float_t(ndigits)/(160*144);
- printf("* %d * %d * %3.1f%% *\n",ich,ndigits,occ[ich]*100);
- }
- mean = sum/7;
- printf("*****************************************\n");
- printf("* Mean occupancy * %3.1f%% *\n",mean*100);
- printf("*****************************************\n");
- }
-
- printf("\nEnd of analysis\n");
-
-}
-
-//_________________________________________________________________________________________________
-
-
-void AliRICH::DiagnosticsSE(Int_t diaglevel,Int_t evNumber1,Int_t evNumber2)
-{
-
-AliRICH *pRICH = (AliRICH*)gAlice->GetDetector("RICH");
- AliRICHSegmentationV0* segmentation;
- AliRICHChamber* chamber;
-
- chamber = &(pRICH->Chamber(0));
- segmentation=(AliRICHSegmentationV0*) chamber->GetSegmentationModel();
-
- Int_t NpadX = segmentation->Npx(); // number of pads on X
- Int_t NpadY = segmentation->Npy(); // number of pads on Y
-
- //Int_t Pad[144][160];
- /*for (Int_t i=0;i<NpadX;i++) {
- for (Int_t j=0;j<NpadY;j++) {
- Pad[i][j]=0;
- }
- } */
-
-
- Int_t xmin= -NpadX/2;
- Int_t xmax= NpadX/2;
- Int_t ymin= -NpadY/2;
- Int_t ymax= NpadY/2;
-
- Float_t PTfinal = 0;
- Int_t pionCount = 0;
- Int_t kaonCount = 0;
- Int_t protonCount = 0;
-
- TH2F *feedback = 0;
- TH2F *mip = 0;
- TH2F *cerenkov = 0;
- TH2F *h = 0;
- TH1F *hitsX = 0;
- TH1F *hitsY = 0;
-
- TH2F *hc0 = new TH2F("hc0","Zoom on center of central chamber",150,-25,25,150,-45,5);
-
- if (diaglevel == 1)
- {
- printf("Single Ring Hits\n");
- feedback = new TH2F("feedback","Feedback hit distribution",150,-20,20,150,-35,5);
- mip = new TH2F("mip","Mip hit distribution",150,-20,20,150,-35,5);
- cerenkov = new TH2F("cerenkov","Cerenkov hit distribution",150,-20,20,150,-35,5);
- h = new TH2F("h","Detector hit distribution",150,-20,20,150,-35,5);
- hitsX = new TH1F("hitsX","Distribution of hits along x-axis",150,-50,50);
- hitsY = new TH1F("hitsY","Distribution of hits along z-axis",150,-50,50);
- }
- else
- {
- printf("Full Event Hits\n");
-
- feedback = new TH2F("feedback","Feedback hit distribution",150,-300,300,150,-300,300);
- mip = new TH2F("mip","Mip hit distribution",150,-300,300,150,-300,300);
- cerenkov = new TH2F("cerenkov","Cerenkov hit distribution",150,-300,300,150,-300,300);
- h = new TH2F("h","Detector hit distribution",150,-300,300,150,-300,300);
- hitsX = new TH1F("digitsX","Distribution of hits along x-axis",200,-300,300);
- hitsY = new TH1F("digitsY","Distribution of hits along z-axis",200,-300,300);
- }
-
-
-
- TH2F *hc1 = new TH2F("hc1","Chamber 1 signal distribution",NpadX,xmin,xmax,NpadY,ymin,ymax);
- TH2F *hc2 = new TH2F("hc2","Chamber 2 signal distribution",NpadX,xmin,xmax,NpadY,ymin,ymax);
- TH2F *hc3 = new TH2F("hc3","Chamber 3 signal distribution",NpadX,xmin,xmax,NpadY,ymin,ymax);
- TH2F *hc4 = new TH2F("hc4","Chamber 4 signal distribution",NpadX,xmin,xmax,NpadY,ymin,ymax);
- TH2F *hc5 = new TH2F("hc5","Chamber 5 signal distribution",NpadX,xmin,xmax,NpadY,ymin,ymax);
- TH2F *hc6 = new TH2F("hc6","Chamber 6 signal distribution",NpadX,xmin,xmax,NpadY,ymin,ymax);
- TH2F *hc7 = new TH2F("hc7","Chamber 7 signal distribution",NpadX,xmin,xmax,NpadY,ymin,ymax);
-
- TH1F *Clcharge = new TH1F("Clcharge","Cluster Charge Distribution",500,0.,500.);
- TH1F *ckovangle = new TH1F("ckovangle","Cerenkov angle per photon",100,.35,.8);
- TH1F *hckphi = new TH1F("hckphi","Cerenkov phi angle per photon",620,-3.1,3.1);
- TH1F *mother = new TH1F("mother","Cerenkovs per Mip",75,0.,75.);
- TH1F *radius = new TH1F("radius","Mean distance to Mip",100,0.,20.);
- TH1F *phspectra1 = new TH1F("phspectra1","Detected Photon Spectra",200,5.,10.);
- TH1F *phspectra2 = new TH1F("phspectra2","Produced Photon Spectra",200,5.,10.);
- TH1F *totalphotonstrack = new TH1F("totalphotonstrack","Produced Photons per Mip",100,200,700.);
- TH1F *totalphotonsevent = new TH1F("totalphotonsevent","Produced Photons per Mip",100,200,700.);
- //TH1F *feedbacks = new TH1F("feedbacks","Produced Feedbacks per Mip",50,0.5,50.);
- TH1F *padnumber = new TH1F("padnumber","Number of pads per cluster",50,-0.5,50.);
- TH1F *padsev = new TH1F("padsev","Number of pads hit per MIP",50,0.5,100.);
- TH1F *clusev = new TH1F("clusev","Number of clusters per MIP",50,0.5,50.);
- TH1F *photev = new TH1F("photev","Number of detected photons per MIP",50,0.5,50.);
- TH1F *feedev = new TH1F("feedev","Number of feedbacks per MIP",50,0.5,50.);
- TH1F *padsmip = new TH1F("padsmip","Number of pads per event inside MIP region",50,0.5,50.);
- TH1F *padscl = new TH1F("padscl","Number of pads per event from cluster count",50,0.5,100.);
- TH1F *pionspectra = new TH1F("pionspectra","Pion Spectra",200,.5,10.);
- TH1F *protonspectra = new TH1F("protonspectra","Proton Spectra",200,.5,10.);
- TH1F *kaonspectra = new TH1F("kaonspectra","Kaon Spectra",100,.5,10.);
- TH1F *chargedspectra = new TH1F("chargedspectra","Charged particles above 1 GeV Spectra",100,.5,10.);
- TH1F *hitsPhi = new TH1F("hitsPhi","Distribution of phi angle of incidence",50,0,360);
- TH1F *hitsTheta = new TH1F("hitsTheta","Distribution of theta angle of incidence",50,0,15);
- TH1F *Omega1D = new TH1F("omega","Reconstructed Cerenkov angle per track",50,.5,1);
- TH1F *Theta = new TH1F("theta","Reconstructed theta incidence angle per track",100,0,15);
- TH1F *Phi = new TH1F("phi","Reconstructed phi incidence per track",100,0,360);
- TH1F *Omega3D = new TH1F("omega","Reconstructed Cerenkov angle per track",100,.35,.8);
- TH1F *PhotonCer = new TH1F("photoncer","Reconstructed Cerenkov angle per photon",100,.35,.8);
- TH2F *PadsUsed = new TH2F("padsused","Pads Used for Reconstruction",100,-30,30,100,-30,30);
- TH1F *MeanRadius = new TH1F("radius","Mean Radius for reconstructed track",100,0.,20.);
- TH2F *identification = new TH2F("identification","Particle Identification",100,1,5,100,0,.8);
- TH1F *OriginalOmega = new TH1F("Original Omega","Cerenkov angle per track",100,.35,.8);
- TH1F *OriginalPhi = new TH1F("Original Phi","Distribution of phi angle of incidence per track",100,0,360);
- TH1F *OriginalTheta = new TH1F("Original Theta","Distribution of theta angle per track",100,0,15);
- TH1F *OmegaError = new TH1F("Omega Error","Difference between original an reconstructed cerenkov angle",100,0,.2);
- TH1F *PhiError = new TH1F("Phi Error","Difference between original an reconstructed phi angle",100,0,360);
- TH1F *ThetaError = new TH1F("Theta Error","Difference between original an reconstructed phi angle",100,0,15);
-
-
-// Start loop over events
-
- Int_t Nh=0;
- Int_t pads=0;
- Int_t Nh1=0;
- Int_t mothers[80000];
- Int_t mothers2[80000];
- Float_t mom[3];
- Int_t nraw=0;
- Int_t phot=0;
- Int_t feed=0;
- Int_t padmip=0;
- Float_t x=0,y=0;
-
- Float_t chiSquareOmega = 0;
- Float_t chiSquareTheta = 0;
- Float_t chiSquarePhi = 0;
-
- Float_t recEffEvent = 0;
- Float_t recEffTotal = 0;
-
- Float_t trackglob[3];
- Float_t trackloc[3];
-
-
- for (Int_t i=0;i<100;i++) mothers[i]=0;
-
- for (int nev=0; nev<= evNumber2; nev++) {
- Int_t nparticles = gAlice->GetEvent(nev);
-
-
- //cout<<"nev "<<nev<<endl;
- printf ("\n**********************************\nProcessing Event: %d\n",nev);
- //cout<<"nparticles "<<nparticles<<endl;
- printf ("Particles : %d\n\n",nparticles);
- if (nev < evNumber1) continue;
- if (nparticles <= 0) return;
-
-// Get pointers to RICH detector and Hits containers
-
-
- TTree *TH = TreeH();
- Stat_t ntracks = TH->GetEntries();
-
- // Start loop on tracks in the hits containers
- //Int_t Nc=0;
- for (Int_t track=0; track<ntracks;track++) {
-
- printf ("\nProcessing Track: %d\n",track);
- gAlice->ResetHits();
- TH->GetEvent(track);
- Int_t nhits = pRICH->Hits()->GetEntriesFast();
- if (nhits) Nh+=nhits;
- printf("Hits : %d\n",nhits);
- for(AliRICHHit* mHit=(AliRICHHit*)pRICH->FirstHit(-1);
- mHit;
- mHit=(AliRICHHit*)pRICH->NextHit())
- {
- Int_t nch = mHit->Chamber(); // chamber number
- trackglob[0] = mHit->X(); // x-pos of hit
- trackglob[1] = mHit->Y();
- trackglob[2] = mHit->Z(); // y-pos of hit
- //x = mHit->X(); // x-pos of hit
- //y = mHit->Z(); // y-pos
- Float_t phi = mHit->Phi(); //Phi angle of incidence
- Float_t theta = mHit->Theta(); //Theta angle of incidence
- Int_t index = mHit->Track();
- Int_t particle = (Int_t)(mHit->Particle());
- //Int_t freon = (Int_t)(mHit->fLoss);
- Float_t px = mHit->MomX();
- Float_t py = mHit->MomY();
-
- if (TMath::Abs(particle) < 10000000)
- {
- PTfinal=TMath::Sqrt(px*px + py*py);
- //printf("PTfinal 0: %f\n",PTfinal);
- }
-
- chamber = &(pRICH->Chamber(nch-1));
-
- //printf("Nch:%d\n",nch);
-
- chamber->GlobaltoLocal(trackglob,trackloc);
-
- chamber->LocaltoGlobal(trackloc,trackglob);
-
-
- x=trackloc[0];
- y=trackloc[2];
-
- hitsX->Fill(x,(float) 1);
- hitsY->Fill(y,(float) 1);
-
- //printf("Particle:%9d\n",particle);
-
- TParticle *current = (TParticle*)gAlice->Particle(index);
- //printf("Particle type: %d\n",sizeoff(Particles));
-
- hitsTheta->Fill(theta,(float) 1);
- //hitsPhi->Fill(phi,(float) 1);
- //if (pRICH->GetDebugLevel() == -1)
- //printf("Theta:%f, Phi:%f\n",theta,phi);
-
- //printf("Debug Level:%d\n",pRICH->GetDebugLevel());
-
- if (current->GetPdgCode() < 10000000)
- {
- mip->Fill(x,y,(float) 1);
- //printf("adding mip\n");
- //if (current->Energy() - current->GetCalcMass()>1 && freon==1)
- //{
- hitsPhi->Fill(TMath::Abs(phi),(float) 1);
- //hitsTheta->Fill(theta,(float) 1);
- //printf("Theta:%f, Phi:%f\n",theta,phi);
- //}
- }
-
- if (TMath::Abs(particle)==211 || TMath::Abs(particle)==111)
- {
- pionspectra->Fill(current->Energy() - current->GetCalcMass(),(float) 1);
- }
- if (TMath::Abs(particle)==2212)
- {
- protonspectra->Fill(current->Energy() - current->GetCalcMass(),(float) 1);
- }
- if (TMath::Abs(particle)==321 || TMath::Abs(particle)==130 || TMath::Abs(particle)==310
- || TMath::Abs(particle)==311)
- {
- kaonspectra->Fill(current->Energy() - current->GetCalcMass(),(float) 1);
- }
- if(TMath::Abs(particle)==211 || TMath::Abs(particle)==2212 || TMath::Abs(particle)==321)
- {
- if (current->Energy() - current->GetCalcMass()>1)
- chargedspectra->Fill(current->Energy() - current->GetCalcMass(),(float) 1);
- }
- //printf("Hits:%d\n",hit);
- //printf ("Chamber number:%d x:%f y:%f\n",nch,x,y);
- // Fill the histograms
- Nh1+=nhits;
- h->Fill(x,y,(float) 1);
- //}
- //}
- }
-
- Int_t ncerenkovs = pRICH->Cerenkovs()->GetEntriesFast();
- //if (current->GetPdgCode() < 50000051 && current->GetPdgCode() > 50000040)
- //totalphotonsevent->Fill(ncerenkovs,(float) 1);
-
- if (ncerenkovs) {
- printf("Cerenkovs : %d\n",ncerenkovs);
- totalphotonsevent->Fill(ncerenkovs,(float) 1);
- for (Int_t hit=0;hit<ncerenkovs;hit++) {
- AliRICHCerenkov* cHit = (AliRICHCerenkov*) pRICH->Cerenkovs()->UncheckedAt(hit);
- Int_t nchamber = cHit->fChamber; // chamber number
- Int_t index = cHit->Track();
- //Int_t pindex = (Int_t)(cHit->fIndex);
- trackglob[0] = cHit->X(); // x-pos of hit
- trackglob[1] = cHit->Y();
- trackglob[2] = cHit->Z(); // y-pos of hit
- //Float_t cx = cHit->X(); // x-position
- //Float_t cy = cHit->Z(); // y-position
- Int_t cmother = cHit->fCMother; // Index of mother particle
- Int_t closs = (Int_t)(cHit->fLoss); // How did the particle get lost?
- Float_t cherenkov = cHit->fCerenkovAngle; //production cerenkov angle
-
- chamber = &(pRICH->Chamber(nchamber-1));
-
- //printf("Nch:%d\n",nch);
-
- chamber->GlobaltoLocal(trackglob,trackloc);
-
- chamber->LocaltoGlobal(trackloc,trackglob);
-
-
- Float_t cx=trackloc[0];
- Float_t cy=trackloc[2];
-
- //printf ("Cerenkov hit number %d/%d, X:%f, Y:%f\n",hit,ncerenkovs,cx,cy);
-
-
- //printf("Particle:%9d\n",index);
-
- TParticle *current = (TParticle*)gAlice->Particle(index);
- Float_t energyckov = current->Energy();
-
- if (current->GetPdgCode() == 50000051)
- {
- if (closs==4)
- {
- feedback->Fill(cx,cy,(float) 1);
- feed++;
- }
- }
- if (current->GetPdgCode() == 50000050)
- {
-
- if (closs !=4)
- {
- phspectra2->Fill(energyckov*1e9,(float) 1);
- }
-
- if (closs==4)
- {
- cerenkov->Fill(cx,cy,(float) 1);
-
- //printf ("Cerenkov hit number %d/%d, X:%d, Y:%d\n",hit,ncerenkovs,cx,cy);
-
- //TParticle *MIP = (TParticle*)gAlice->Particle(cmother);
- AliRICHHit* mipHit = (AliRICHHit*) pRICH->Hits()->UncheckedAt(0);
- mom[0] = current->Px();
- mom[1] = current->Py();
- mom[2] = current->Pz();
- //mom[0] = cHit->fMomX;
- // mom[1] = cHit->fMomZ;
- //mom[2] = cHit->fMomY;
- //Float_t energymip = MIP->Energy();
- //Float_t Mip_px = mipHit->fMomFreoX;
- //Float_t Mip_py = mipHit->fMomFreoY;
- //Float_t Mip_pz = mipHit->fMomFreoZ;
- //Float_t Mip_px = MIP->Px();
- //Float_t Mip_py = MIP->Py();
- //Float_t Mip_pz = MIP->Pz();
-
-
-
- //Float_t r = mom[0]*mom[0] + mom[1]*mom[1] + mom[2]*mom[2];
- //Float_t rt = TMath::Sqrt(r);
- //Float_t Mip_r = Mip_px*Mip_px + Mip_py*Mip_py + Mip_pz*Mip_pz;
- //Float_t Mip_rt = TMath::Sqrt(Mip_r);
- //Float_t coscerenkov = (mom[0]*Mip_px + mom[1]*Mip_py + mom[2]*Mip_pz)/(rt*Mip_rt+0.0000001);
- //Float_t cherenkov = TMath::ACos(coscerenkov);
- ckovangle->Fill(cherenkov,(float) 1); //Cerenkov angle calculus
- //printf("Cherenkov: %f\n",cherenkov);
- Float_t ckphi=TMath::ATan2(mom[0], mom[2]);
- hckphi->Fill(ckphi,(float) 1);
-
-
- //Float_t mix = MIP->Vx();
- //Float_t miy = MIP->Vy();
- Float_t mx = mipHit->X();
- Float_t my = mipHit->Z();
- //printf("FX %e, FY %e, VX %e, VY %e\n",cx,cy,mx,my);
- Float_t dx = trackglob[0] - mx;
- Float_t dy = trackglob[2] - my;
- //printf("Dx:%f, Dy:%f\n",dx,dy);
- Float_t final_radius = TMath::Sqrt(dx*dx+dy*dy);
- //printf("Final radius:%f\n",final_radius);
- radius->Fill(final_radius,(float) 1);
-
- phspectra1->Fill(energyckov*1e9,(float) 1);
- phot++;
- }
- for (Int_t nmothers=0;nmothers<=ntracks;nmothers++){
- if (cmother == nmothers){
- if (closs == 4)
- mothers2[cmother]++;
- mothers[cmother]++;
- }
- }
- }
- }
- }
-
-
- if(gAlice->TreeR())
- {
- Int_t nent=(Int_t)gAlice->TreeR()->GetEntries();
- gAlice->TreeR()->GetEvent(nent-1);
- TClonesArray *Rawclusters = pRICH->RawClustAddress(2); // Raw clusters branch
- //printf ("Rawclusters:%p",Rawclusters);
- Int_t nrawclusters = Rawclusters->GetEntriesFast();
-
- if (nrawclusters) {
- printf("Raw Clusters : %d\n",nrawclusters);
- for (Int_t hit=0;hit<nrawclusters;hit++) {
- AliRICHRawCluster* rcHit = (AliRICHRawCluster*) pRICH->RawClustAddress(2)->UncheckedAt(hit);
- //Int_t nchamber = rcHit->fChamber; // chamber number
- //Int_t nhit = cHit->fHitNumber; // hit number
- Int_t qtot = rcHit->fQ; // charge
- Float_t fx = rcHit->fX; // x-position
- Float_t fy = rcHit->fY; // y-position
- //Int_t type = rcHit->fCtype; // cluster type ?
- Int_t mult = rcHit->fMultiplicity; // How many pads form the cluster
- pads += mult;
- if (qtot > 0) {
- //printf ("fx: %d, fy: %d\n",fx,fy);
- if (fx>(x-4) && fx<(x+4) && fy>(y-4) && fy<(y+4)) {
- //printf("There %d \n",mult);
- padmip+=mult;
- } else {
- padnumber->Fill(mult,(float) 1);
- nraw++;
- if (mult<4) Clcharge->Fill(qtot,(float) 1);
- }
-
- }
- }
- }
-
-
- TClonesArray *RecHits1D = pRICH->RecHitsAddress1D(2);
- Int_t nrechits1D = RecHits1D->GetEntriesFast();
- //printf (" nrechits:%d\n",nrechits);
-
- if(nrechits1D)
- {
- for (Int_t hit=0;hit<nrechits1D;hit++) {
- AliRICHRecHit1D* recHit1D = (AliRICHRecHit1D*) pRICH->RecHitsAddress1D(2)->UncheckedAt(hit);
- Float_t r_omega = recHit1D->fOmega; // Cerenkov angle
- Float_t *cer_pho = recHit1D->fCerPerPhoton; // Cerenkov angle per photon
- Int_t *padsx = recHit1D->fPadsUsedX; // Pads Used fo reconstruction (x)
- Int_t *padsy = recHit1D->fPadsUsedY; // Pads Used fo reconstruction (y)
- Int_t goodPhotons = recHit1D->fGoodPhotons; // Number of pads used for reconstruction
-
- Omega1D->Fill(r_omega,(float) 1);
-
- for (Int_t i=0; i<goodPhotons; i++)
- {
- PhotonCer->Fill(cer_pho[i],(float) 1);
- PadsUsed->Fill(padsx[i],padsy[i],1);
- //printf("Angle:%f, pad: %d %d\n",cer_pho[i],padsx[i],padsy[i]);
- }
-
- //printf("Omega: %f, Theta: %f, Phi: %f\n",r_omega,r_theta,r_phi);
- }
- }
-
-
- TClonesArray *RecHits3D = pRICH->RecHitsAddress3D(2);
- Int_t nrechits3D = RecHits3D->GetEntriesFast();
- //printf (" nrechits:%d\n",nrechits);
-
- if(nrechits3D)
- {
- recEffEvent = 0;
-
- //for (Int_t hit=0;hit<nrechits3D;hit++) {
- AliRICHRecHit3D* recHit3D = (AliRICHRecHit3D*) pRICH->RecHitsAddress3D(2)->UncheckedAt(track);
- Float_t r_omega = recHit3D->fOmega; // Cerenkov angle
- Float_t r_theta = recHit3D->fTheta; // Theta angle of incidence
- Float_t r_phi = recHit3D->fPhi; // Phi angle if incidence
- Float_t meanradius = recHit3D->fMeanRadius; // Mean radius for reconstructed point
- Float_t originalOmega = recHit3D->fOriginalOmega; // Real Cerenkov angle
- Float_t originalTheta = recHit3D->fOriginalTheta; // Real incidence angle
- Float_t originalPhi = recHit3D->fOriginalPhi; // Real azimuthal angle
-
-
- //correction to track cerenkov angle
- originalOmega = (Float_t) ckovangle->GetMean();
-
- if(diaglevel == 4)
- {
- printf("\nMean cerenkov angle: %f\n", originalOmega);
- printf("Reconstructed cerenkov angle: %f\n",r_omega);
- }
-
- Float_t omegaError = TMath::Abs(originalOmega - r_omega);
- Float_t thetaError = TMath::Abs(originalTheta - r_theta);
- Float_t phiError = TMath::Abs(originalPhi - r_phi);
-
- //chiSquareOmega += (omegaError/originalOmega)*(omegaError/originalOmega);
- //chiSquareTheta += (thetaError/originalTheta)*(thetaError/originalTheta);
- //chiSquarePhi += (phiError/originalPhi)*(phiError/originalPhi);
-
- if(TMath::Abs(omegaError) < 0.015)
- recEffEvent += 1;
-
-
-
- //printf("rechit %f %f %f %f %f\n",recHit3D->fOmega,recHit3D->fTheta,recHit3D->fPhi, recHit3D->fX,recHit3D->fY);
-
- Omega3D->Fill(r_omega,(float) 1);
- Theta->Fill(r_theta*180/TMath::Pi(),(float) 1);
- Phi->Fill(r_phi*180/TMath::Pi()-180,(float) 1);
- MeanRadius->Fill(meanradius,(float) 1);
- identification->Fill(PTfinal, r_omega,1);
- OriginalOmega->Fill(originalOmega, (float) 1);
- OriginalTheta->Fill(originalTheta, (float) 1);
- OriginalPhi->Fill(TMath::Abs(originalPhi), (float) 1);
- OmegaError->Fill(omegaError, (float) 1);
- ThetaError->Fill(thetaError, (float) 1);
- PhiError->Fill(phiError, (float) 1);
-
- recEffEvent = recEffEvent;
- recEffTotal += recEffEvent;
-
- Float_t pioncer = acos(sqrt((.139*.139+PTfinal*PTfinal)/(PTfinal*PTfinal*1.285*1.285)));
- Float_t kaoncer = acos(sqrt((.439*.439+PTfinal*PTfinal)/(PTfinal*PTfinal*1.285*1.285)));
- Float_t protoncer = acos(sqrt((.938*.938+PTfinal*PTfinal)/(PTfinal*PTfinal*1.285*1.285)));
-
- Float_t piondist = TMath::Abs(r_omega - pioncer);
- Float_t kaondist = TMath::Abs(r_omega - kaoncer);
- Float_t protondist = TMath::Abs(r_omega - protoncer);
-
- if(diaglevel == 4)
- {
- if(pioncer<r_omega)
- {
- printf("Identified as a PION!\n");
- pionCount += 1;
- }
- if(kaoncer<r_omega && pioncer>r_omega)
- {
- if(kaondist>piondist)
- {
- printf("Identified as a PION!\n");
- pionCount += 1;
- }
- else
- {
- printf("Identified as a KAON!\n");
- kaonCount += 1;
- }
- } }
- if(protoncer<r_omega && kaoncer>r_omega)
- {
- if(kaondist>protondist)
- {
- printf("Identified as a PROTON!\n");
- protonCount += 1;
- }
- else
- {
- printf("Identified as a KAON!\n");
- pionCount += 1;
- }
- }
- if(protoncer>r_omega)
- {
- printf("Identified as a PROTON!\n");
- protonCount += 1;
- }
-
- printf("\nReconstruction efficiency: %5.2f%%\n", recEffEvent*100);
- }
- }
- }
-
-
- for (Int_t nmothers=0;nmothers<ntracks;nmothers++){
- totalphotonstrack->Fill(mothers[nmothers],(float) 1);
- mother->Fill(mothers2[nmothers],(float) 1);
- //printf ("Entries in %d : %d\n",nmothers, mothers[nmothers]);
- }
-
- clusev->Fill(nraw,(float) 1);
- photev->Fill(phot,(float) 1);
- feedev->Fill(feed,(float) 1);
- padsmip->Fill(padmip,(float) 1);
- padscl->Fill(pads,(float) 1);
- //printf("Photons:%d\n",phot);
- phot = 0;
- feed = 0;
- pads = 0;
- nraw=0;
- padmip=0;
-
-
-
- gAlice->ResetDigits();
- //Int_t nent=(Int_t)gAlice->TreeD()->GetEntries();
- gAlice->TreeD()->GetEvent(0);
-
- if (diaglevel < 4)
- {
-
-
- TClonesArray *Digits = pRICH->DigitsAddress(2);
- Int_t ndigits = Digits->GetEntriesFast();
- printf("Digits : %d\n",ndigits);
- padsev->Fill(ndigits,(float) 1);
- for (Int_t hit=0;hit<ndigits;hit++) {
- AliRICHDigit* dHit = (AliRICHDigit*) Digits->UncheckedAt(hit);
- Int_t qtot = dHit->Signal(); // charge
- Int_t ipx = dHit->PadX(); // pad number on X
- Int_t ipy = dHit->PadY(); // pad number on Y
- //printf("%d, %d\n",ipx,ipy);
- if( ipx<=100 && ipy <=100) hc0->Fill(ipx,ipy,(float) qtot);
- }
- }
-
- if (diaglevel == 5)
- {
- for (Int_t ich=0;ich<7;ich++)
- {
- TClonesArray *Digits = pRICH->DigitsAddress(ich); // Raw clusters branch
- Int_t ndigits = Digits->GetEntriesFast();
- //printf("Digits:%d\n",ndigits);
- padsev->Fill(ndigits,(float) 1);
- if (ndigits) {
- for (Int_t hit=0;hit<ndigits;hit++) {
- AliRICHDigit* dHit = (AliRICHDigit*) Digits->UncheckedAt(hit);
- //Int_t nchamber = dHit->GetChamber(); // chamber number
- //Int_t nhit = dHit->fHitNumber; // hit number
- Int_t qtot = dHit->Signal(); // charge
- Int_t ipx = dHit->PadX(); // pad number on X
- Int_t ipy = dHit->PadY(); // pad number on Y
- //Int_t iqpad = dHit->fQpad; // charge per pad
- //Int_t rpad = dHit->fRSec; // R-position of pad
- //printf ("Pad hit, PadX:%d, PadY:%d\n",ipx,ipy);
- if( ipx<=100 && ipy <=100 && ich==2) hc0->Fill(ipx,ipy,(float) qtot);
- if( ipx<=162 && ipy <=162 && ich==0) hc1->Fill(ipx,ipy,(float) qtot);
- if( ipx<=162 && ipy <=162 && ich==1) hc2->Fill(ipx,ipy,(float) qtot);
- if( ipx<=162 && ipy <=162 && ich==2) hc3->Fill(ipx,ipy,(float) qtot);
- if( ipx<=162 && ipy <=162 && ich==3) hc4->Fill(ipx,ipy,(float) qtot);
- if( ipx<=162 && ipy <=162 && ich==4) hc5->Fill(ipx,ipy,(float) qtot);
- if( ipx<=162 && ipy <=162 && ich==5) hc6->Fill(ipx,ipy,(float) qtot);
- if( ipx<=162 && ipy <=162 && ich==6) hc7->Fill(ipx,ipy,(float) qtot);
- }
- }
- }
- }
- }
-
- if(diaglevel == 4)
- {
-
- Stat_t omegaE;
- Stat_t thetaE;
- Stat_t phiE;
-
- Stat_t omegaO;
- Stat_t thetaO;
- Stat_t phiO;
-
- for(Int_t i=0;i<99;i++)
- {
- omegaE = OriginalOmega->GetBinContent(i);
- if(omegaE != 0)
- {
- omegaO = Omega3D->GetBinContent(i);
- chiSquareOmega += (TMath::Power(omegaE,2) - TMath::Power(omegaO,2))/omegaO;
- }
-
- thetaE = OriginalTheta->GetBinContent(i);
- if(thetaE != 0)
- {
- thetaO = Theta->GetBinContent(i);
- chiSquareTheta += (TMath::Power(thetaE,2) - TMath::Power(thetaO,2))/thetaO;
- }
-
- phiE = OriginalPhi->GetBinContent(i);
- if(phiE != 0)
- {
- phiO = Phi->GetBinContent(i);
- chiSquarePhi += (TMath::Power(phiE,2) - TMath::Power(phiO,2))/phiO;
- }
-
- //printf(" o: %f t: %f p: %f\n", OriginalOmega->GetBinContent(i), OriginalTheta->GetBinContent(i),OriginalPhi->GetBinContent(i));
-
- }
-
-
-
- printf("\nChi square test values: Omega - %f\n", chiSquareOmega);
- printf(" Theta - %f\n", chiSquareTheta);
- printf(" Phi - %f\n", chiSquarePhi);
-
- printf("\nKolmogorov test values: Omega - %5.4f\n", Omega3D->KolmogorovTest(OriginalOmega));
- printf(" Theta - %5.4f\n", Theta->KolmogorovTest(OriginalTheta));
- printf(" Phi - %5.4f\n", Phi->KolmogorovTest(OriginalPhi));
-
- recEffTotal = recEffTotal/evNumber2;
- printf("\nTotal reconstruction efficiency: %5.2f%%\n", recEffTotal*100);
- printf("\n Pions: %d\n Kaons: %d\n Protons:%d\n",pionCount, kaonCount, protonCount);
-
- }
-
-
- //Create canvases, set the view range, show histograms
-
- TCanvas *c1 = 0;
- TCanvas *c2 = 0;
- TCanvas *c3 = 0;
- TCanvas *c4 = 0;
- TCanvas *c5 = 0;
- TCanvas *c6 = 0;
- TCanvas *c7 = 0;
- TCanvas *c8 = 0;
- TCanvas *c9 = 0;
- TCanvas *c10 = 0;
- TCanvas *c11 = 0;
- TCanvas *c12 = 0;
- TCanvas *c13 = 0;
-
- //TF1* expo = 0;
- //TF1* gaus = 0;
-
- TStyle *mystyle=new TStyle("Plain","mystyle");
- mystyle->SetPalette(1,0);
- //mystyle->SetTitleYSize(0.2);
- //mystyle->SetStatW(0.19);
- //mystyle->SetStatH(0.1);
- //mystyle->SetStatFontSize(0.01);
- //mystyle->SetTitleYSize(0.3);
- mystyle->SetFuncColor(2);
- //mystyle->SetOptStat(0111);
- mystyle->SetDrawBorder(0);
- mystyle->SetTitleBorderSize(0);
- mystyle->SetOptFit(1111);
- mystyle->cd();
-
-
- TClonesArray *RecHits3D = pRICH->RecHitsAddress3D(2);
- Int_t nrechits3D = RecHits3D->GetEntriesFast();
- TClonesArray *RecHits1D = pRICH->RecHitsAddress1D(2);
- Int_t nrechits1D = RecHits1D->GetEntriesFast();
-
- switch(diaglevel)
- {
- case 1:
-
- c1 = new TCanvas("c1","Alice RICH digits",50,50,300,350);
- hc0->SetXTitle("ix (npads)");
- hc0->Draw("colz");
-
-//
- c2 = new TCanvas("c2","Hits per type",100,100,600,700);
- c2->Divide(2,2);
- //c4->SetFillColor(42);
-
- c2->cd(1);
- feedback->SetXTitle("x (cm)");
- feedback->SetYTitle("y (cm)");
- feedback->Draw("colz");
-
- c2->cd(2);
- //mip->SetFillColor(5);
- mip->SetXTitle("x (cm)");
- mip->SetYTitle("y (cm)");
- mip->Draw("colz");
-
- c2->cd(3);
- //cerenkov->SetFillColor(5);
- cerenkov->SetXTitle("x (cm)");
- cerenkov->SetYTitle("y (cm)");
- cerenkov->Draw("colz");
-
- c2->cd(4);
- //h->SetFillColor(5);
- h->SetXTitle("x (cm)");
- h->SetYTitle("y (cm)");
- h->Draw("colz");
-
- c3 = new TCanvas("c3","Hits distribution",150,150,600,350);
- c3->Divide(2,1);
- //c10->SetFillColor(42);
-
- c3->cd(1);
- hitsX->SetFillColor(5);
- hitsX->SetXTitle("(cm)");
- hitsX->Draw();
-
- c3->cd(2);
- hitsY->SetFillColor(5);
- hitsY->SetXTitle("(cm)");
- hitsY->Draw();
-
-
- break;
-//
- case 2:
-
- c4 = new TCanvas("c4","Photon Spectra",50,50,600,350);
- c4->Divide(2,1);
- //c6->SetFillColor(42);
-
- c4->cd(1);
- phspectra2->SetFillColor(5);
- phspectra2->SetXTitle("energy (eV)");
- phspectra2->Draw();
- c4->cd(2);
- phspectra1->SetFillColor(5);
- phspectra1->SetXTitle("energy (eV)");
- phspectra1->Draw();
-
- c5 = new TCanvas("c5","Particles Spectra",100,100,600,700);
- c5->Divide(2,2);
- //c9->SetFillColor(42);
-
- c5->cd(1);
- pionspectra->SetFillColor(5);
- pionspectra->SetXTitle("(GeV)");
- pionspectra->Draw();
-
- c5->cd(2);
- protonspectra->SetFillColor(5);
- protonspectra->SetXTitle("(GeV)");
- protonspectra->Draw();
-
- c5->cd(3);
- kaonspectra->SetFillColor(5);
- kaonspectra->SetXTitle("(GeV)");
- kaonspectra->Draw();
-
- c5->cd(4);
- chargedspectra->SetFillColor(5);
- chargedspectra->SetXTitle("(GeV)");
- chargedspectra->Draw();
-
- break;
-
- case 3:
-
-
- if(gAlice->TreeR())
- {
- c6=new TCanvas("c6","Clusters Statistics",50,50,600,700);
- c6->Divide(2,2);
- //c3->SetFillColor(42);
-
- c6->cd(1);
- //TPad* c6_1;
- //c6_1->SetLogy();
- Clcharge->SetFillColor(5);
- Clcharge->SetXTitle("ADC counts");
- if (evNumber2>10)
- {
- Clcharge->Fit("expo");
- //expo->SetLineColor(2);
- //expo->SetLineWidth(3);
- }
- Clcharge->Draw();
-
- c6->cd(2);
- padnumber->SetFillColor(5);
- padnumber->SetXTitle("(counts)");
- padnumber->Draw();
-
- c6->cd(3);
- clusev->SetFillColor(5);
- clusev->SetXTitle("(counts)");
- if (evNumber2>10)
- {
- clusev->Fit("gaus");
- //gaus->SetLineColor(2);
- //gaus->SetLineWidth(3);
- }
- clusev->Draw();
-
- c6->cd(4);
- padsmip->SetFillColor(5);
- padsmip->SetXTitle("(counts)");
- padsmip->Draw();
- }
-
- if(evNumber2<1)
- {
- c11 = new TCanvas("c11","Cherenkov per Mip",400,10,600,700);
- mother->SetFillColor(5);
- mother->SetXTitle("counts");
- mother->Draw();
- }
-
- c7 = new TCanvas("c7","Production Statistics",100,100,600,700);
- c7->Divide(2,2);
- //c7->SetFillColor(42);
-
- c7->cd(1);
- totalphotonsevent->SetFillColor(5);
- totalphotonsevent->SetXTitle("Photons (counts)");
- if (evNumber2>10)
- {
- totalphotonsevent->Fit("gaus");
- //gaus->SetLineColor(2);
- //gaus->SetLineWidth(3);
- }
- totalphotonsevent->Draw();
-
- c7->cd(2);
- photev->SetFillColor(5);
- photev->SetXTitle("(counts)");
- if (evNumber2>10)
- {
- photev->Fit("gaus");
- //gaus->SetLineColor(2);
- //gaus->SetLineWidth(3);
- }
- photev->Draw();
-
- c7->cd(3);
- feedev->SetFillColor(5);
- feedev->SetXTitle("(counts)");
- if (evNumber2>10)
- {
- feedev->Fit("gaus");
- //gaus->SetLineColor(2);
- //gaus->SetLineWidth(3);
- }
- feedev->Draw();
-
- c7->cd(4);
- padsev->SetFillColor(5);
- padsev->SetXTitle("(counts)");
- if (evNumber2>10)
- {
- padsev->Fit("gaus");
- //gaus->SetLineColor(2);
- //gaus->SetLineWidth(3);
- }
- padsev->Draw();
-
- break;
-
- case 4:
-
-
- if(nrechits3D)
- {
- c8 = new TCanvas("c8","3D reconstruction of Phi angle",50,50,300,1050);
- c8->Divide(1,3);
- //c2->SetFillColor(42);
-
-
- // data per hit
- c8->cd(1);
- hitsPhi->SetFillColor(5);
- if (evNumber2>10)
- hitsPhi->Fit("gaus");
- hitsPhi->Draw();
-
- //data per track
- c8->cd(2);
- OriginalPhi->SetFillColor(5);
- if (evNumber2>10)
- OriginalPhi->Fit("gaus");
- OriginalPhi->Draw();
-
- //recontructed data
- c8->cd(3);
- Phi->SetFillColor(5);
- if (evNumber2>10)
- Phi->Fit("gaus");
- Phi->Draw();
-
- c9 = new TCanvas("c9","3D reconstruction of theta angle",75,75,300,1050);
- c9->Divide(1,3);
-
- // data per hit
- c9->cd(1);
- hitsTheta->SetFillColor(5);
- if (evNumber2>10)
- hitsTheta->Fit("gaus");
- hitsTheta->Draw();
-
- //data per track
- c9->cd(2);
- OriginalTheta->SetFillColor(5);
- if (evNumber2>10)
- OriginalTheta->Fit("gaus");
- OriginalTheta->Draw();
-
- //recontructed data
- c9->cd(3);
- Theta->SetFillColor(5);
- if (evNumber2>10)
- Theta->Fit("gaus");
- Theta->Draw();
-
- c10 = new TCanvas("c10","3D reconstruction of cherenkov angle",100,100,300,1050);
- c10->Divide(1,3);
-
- // data per hit
- c10->cd(1);
- ckovangle->SetFillColor(5);
- ckovangle->SetXTitle("angle (radians)");
- if (evNumber2>10)
- ckovangle->Fit("gaus");
- ckovangle->Draw();
-
- //data per track
- c10->cd(2);
- OriginalOmega->SetFillColor(5);
- OriginalOmega->SetXTitle("angle (radians)");
- if (evNumber2>10)
- OriginalOmega->Fit("gaus");
- OriginalOmega->Draw();
-
- //recontructed data
- c10->cd(3);
- Omega3D->SetFillColor(5);
- Omega3D->SetXTitle("angle (radians)");
- if (evNumber2>10)
- Omega3D->Fit("gaus");
- Omega3D->Draw();
-
-
- c11 = new TCanvas("c11","3D reconstruction of mean radius",125,125,300,700);
- c11->Divide(1,2);
-
- // data per hit
- c11->cd(1);
- radius->SetFillColor(5);
- radius->SetXTitle("radius (cm)");
- radius->Draw();
-
- //recontructed data
- c11->cd(2);
- MeanRadius->SetFillColor(5);
- MeanRadius->SetXTitle("radius (cm)");
- MeanRadius->Draw();
-
-
- c12 = new TCanvas("c12","Cerenkov angle vs. Momentum",150,150,550,350);
-
- c12->cd(1);
- identification->SetFillColor(5);
- identification->SetXTitle("Momentum (GeV/c)");
- identification->SetYTitle("Cherenkov angle (radians)");
-
- //Float_t pionmass=.139;
- //Float_t kaonmass=.493;
- //Float_t protonmass=.938;
- //Float_t n=1.295;
-
- TF1 *pionplot = new TF1("pion","acos(sqrt((.139*.139+x*x)/(x*x*1.285*1.285)))",1,5);
- TF1 *kaonplot = new TF1("kaon","acos(sqrt((.439*.439+x*x)/(x*x*1.285*1.285)))",1,5);
- TF1 *protonplot = new TF1("proton","acos(sqrt((.938*.938+x*x)/(x*x*1.285*1.285)))",1,5);
-
- identification->Draw();
-
- pionplot->SetLineColor(5);
- pionplot->Draw("same");
-
- kaonplot->SetLineColor(4);
- kaonplot->Draw("same");
-
- protonplot->SetLineColor(3);
- protonplot->Draw("same");
- //identification->Draw("same");
-
-
-
- c13 = new TCanvas("c13","Reconstruction Errors",200,200,900,350);
- c13->Divide(3,1);
-
- c13->cd(1);
- PhiError->SetFillColor(5);
- if (evNumber2>10)
- PhiError->Fit("gaus");
- PhiError->Draw();
- c13->cd(2);
- ThetaError->SetFillColor(5);
- if (evNumber2>10)
- ThetaError->Fit("gaus");
- ThetaError->Draw();
- c13->cd(3);
- OmegaError->SetFillColor(5);
- OmegaError->SetXTitle("angle (radians)");
- if (evNumber2>10)
- OmegaError->Fit("gaus");
- OmegaError->Draw();
-
- }
-
- if(nrechits1D)
- {
- c9 = new TCanvas("c9","1D Reconstruction",100,100,1100,700);
- c9->Divide(3,2);
- //c5->SetFillColor(42);
-
- c9->cd(1);
- ckovangle->SetFillColor(5);
- ckovangle->SetXTitle("angle (radians)");
- ckovangle->Draw();
-
- c9->cd(2);
- radius->SetFillColor(5);
- radius->SetXTitle("radius (cm)");
- radius->Draw();
-
- c9->cd(3);
- hc0->SetXTitle("pads");
- hc0->Draw("box");
-
- c9->cd(5);
- Omega1D->SetFillColor(5);
- Omega1D->SetXTitle("angle (radians)");
- Omega1D->Draw();
-
- c9->cd(4);
- PhotonCer->SetFillColor(5);
- PhotonCer->SetXTitle("angle (radians)");
- PhotonCer->Draw();
-
- c9->cd(6);
- PadsUsed->SetXTitle("pads");
- PadsUsed->Draw("box");
- }
-
- break;
-
- case 5:
-
- printf("Drawing histograms.../n");
-
- //if (ndigits)
- //{
- c10 = new TCanvas("c10","Alice RICH digits",50,50,1200,700);
- c1->Divide(4,2);
- //c1->SetFillColor(42);
-
- c10->cd(1);
- hc1->SetXTitle("ix (npads)");
- hc1->Draw("box");
- c10->cd(2);
- hc2->SetXTitle("ix (npads)");
- hc2->Draw("box");
- c10->cd(3);
- hc3->SetXTitle("ix (npads)");
- hc3->Draw("box");
- c10->cd(4);
- hc4->SetXTitle("ix (npads)");
- hc4->Draw("box");
- c10->cd(5);
- hc5->SetXTitle("ix (npads)");
- hc5->Draw("box");
- c10->cd(6);
- hc6->SetXTitle("ix (npads)");
- hc6->Draw("box");
- c10->cd(7);
- hc7->SetXTitle("ix (npads)");
- hc7->Draw("box");
- c10->cd(8);
- hc0->SetXTitle("ix (npads)");
- hc0->Draw("box");
- //}
-//
- c11 = new TCanvas("c11","Hits per type",100,100,600,700);
- c11->Divide(2,2);
- //c4->SetFillColor(42);
-
- c11->cd(1);
- feedback->SetXTitle("x (cm)");
- feedback->SetYTitle("y (cm)");
- feedback->Draw();
-
- c11->cd(2);
- //mip->SetFillColor(5);
- mip->SetXTitle("x (cm)");
- mip->SetYTitle("y (cm)");
- mip->Draw();
-
- c11->cd(3);
- //cerenkov->SetFillColor(5);
- cerenkov->SetXTitle("x (cm)");
- cerenkov->SetYTitle("y (cm)");
- cerenkov->Draw();
-
- c11->cd(4);
- //h->SetFillColor(5);
- h->SetXTitle("x (cm)");
- h->SetYTitle("y (cm)");
- h->Draw();
-
- c12 = new TCanvas("c12","Hits distribution",150,150,600,350);
- c12->Divide(2,1);
- //c10->SetFillColor(42);
-
- c12->cd(1);
- hitsX->SetFillColor(5);
- hitsX->SetXTitle("(cm)");
- hitsX->Draw();
-
- c12->cd(2);
- hitsY->SetFillColor(5);
- hitsY->SetXTitle("(cm)");
- hitsY->Draw();
-
- break;
-
- }
-
-
- // calculate the number of pads which give a signal
-
-
- //Int_t Np=0;
- /*for (Int_t i=0;i< NpadX;i++) {
- for (Int_t j=0;j< NpadY;j++) {
- if (Pad[i][j]>=6){
- Np+=1;
- }
- }
- }*/
- //printf("The total number of pads which give a signal: %d %d\n",Nh,Nh1);
- printf("\nEnd of analysis\n");
- printf("**********************************\n");
-}
-
-////////////////////////////////////////////////////////////////////////
-void AliRICH::MakeBranchInTreeD(TTree *treeD, const char *file)
-{
- //
- // Create TreeD branches for the RICH.
- //
- const Int_t kBufferSize = 4000;
- char branchname[30];
+ if(GetDebug())Info("CreateGeometry","Stop.");
+}//void AliRICH::CreateGeometry()
+//__________________________________________________________________________________________________
+void AliRICH::CreateChambers()
+{//create all RICH Chambers on each call. Previous chambers deleted
+ if(fChambers) delete fChambers;
+ if(GetDebug())Info("CreateChambers","Creating RICH chambers.");
+ fChambers=new TObjArray(kNCH);
+ fChambers->SetOwner();
+ for(int i=0;i<kNCH;i++) fChambers->AddAt(new AliRICHChamber(i+1,Param()),i);
+}//void AliRICH::CreateChambers()
+//__________________________________________________________________________________________________
+void AliRICH::GenerateFeedbacks(Int_t iChamber,Float_t eloss)
+{// Generate FeedBack photons
+ Int_t j;
+ Float_t cthf, phif, enfp = 0, sthf;
+ Float_t e1[3], e2[3], e3[3];
+ Float_t vmod, uswop;
+ Float_t dir[3], phi;
+ Float_t pol[3], mom[4];
+//Determine number of feedback photons
+ TLorentzVector globX4;
+ gMC->TrackPosition(globX4);
+ Int_t sector;
+ Int_t iTotQdc=Param()->Loc2TotQdc(C(iChamber)->Glob2Loc(globX4),eloss,gMC->TrackPid(),sector);
+ Int_t iNphotons=gMC->GetRandom()->Poisson(Param()->AlphaFeedback(sector)*iTotQdc);
+ Info("GenerateFeedbacks","N photons=%i",iNphotons);
+//Generate photons
+ for(Int_t i=0;i<iNphotons;i++){
+ Double_t ranf[2];
+ gMC->GetRandom()->RndmArray(2,ranf); //Sample direction
+ cthf=ranf[0]*2-1.0;
+ if(cthf<0) continue;
+ sthf = TMath::Sqrt((1 - cthf) * (1 + cthf));
+ phif = ranf[1] * 2 * TMath::Pi();
+
+ if(Double_t randomNumber=gMC->GetRandom()->Rndm()<=0.57)
+ enfp = 7.5e-9;
+ else if(randomNumber<=0.7)
+ enfp = 6.4e-9;
+ else
+ enfp = 7.9e-9;
+
+
+ dir[0] = sthf * TMath::Sin(phif); dir[1] = cthf; dir[2] = sthf * TMath::Cos(phif);
+ gMC->Gdtom(dir, mom, 2);
+ mom[0]*=enfp; mom[1]*=enfp; mom[2]*=enfp;
+ mom[3] = TMath::Sqrt(mom[0]*mom[0]+mom[1]*mom[1]+mom[2]*mom[2]);
+
+ // Polarisation
+ e1[0]= 0; e1[1]=-dir[2]; e1[2]= dir[1];
+ e2[0]=-dir[1]; e2[1]= dir[0]; e2[2]= 0;
+ e3[0]= dir[1]; e3[1]= 0; e3[2]=-dir[0];
+
+ vmod=0;
+ for(j=0;j<3;j++) vmod+=e1[j]*e1[j];
+ if (!vmod) for(j=0;j<3;j++) {
+ uswop=e1[j];
+ e1[j]=e3[j];
+ e3[j]=uswop;
+ }
+ vmod=0;
+ for(j=0;j<3;j++) vmod+=e2[j]*e2[j];
+ if (!vmod) for(j=0;j<3;j++) {
+ uswop=e2[j];
+ e2[j]=e3[j];
+ e3[j]=uswop;
+ }
+
+ vmod=0;
+ for(j=0;j<3;j++) vmod+=e1[j]*e1[j];
+ vmod=TMath::Sqrt(1/vmod);
+ for(j=0;j<3;j++) e1[j]*=vmod;
+
+ vmod=0;
+ for(j=0;j<3;j++) vmod+=e2[j]*e2[j];
+ vmod=TMath::Sqrt(1/vmod);
+ for(j=0;j<3;j++) e2[j]*=vmod;
+
+ phi = gMC->GetRandom()->Rndm()* 2 * TMath::Pi();
+ for(j=0;j<3;j++) pol[j]=e1[j]*TMath::Sin(phi)+e2[j]*TMath::Cos(phi);
+ gMC->Gdtom(pol, pol, 2);
+ Int_t outputNtracksStored;
+ gAlice->GetMCApp()->PushTrack(1, //do not transport
+ gAlice->GetMCApp()->GetCurrentTrackNumber(),//parent track
+ kFeedback, //PID
+ mom[0],mom[1],mom[2],mom[3], //track momentum
+ globX4.X(),globX4.Y(),globX4.Z(),globX4.T(), //track origin
+ pol[0],pol[1],pol[2], //polarization
+ kPFeedBackPhoton,outputNtracksStored,1.0);
- //
- // one branch for digits per chamber
- //
- for (Int_t i=0; i<kNCH ;i++) {
- sprintf(branchname,"%sDigits%d",GetName(),i+1);
- if (fDchambers && treeD) {
- MakeBranchInTree(treeD,
- branchname, &((*fDchambers)[i]), kBufferSize, file);
-// printf("Making Branch %s for digits in chamber %d\n",branchname,i+1);
- }
}
-}
-////////////////////////////////////////////////////////////////////////
+}//FeedBackPhotons()
+//__________________________________________________________________________________________________
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff