* provided "as is" without express or implied warranty. *
**************************************************************************/
-/*
-$Log$
-Revision 1.9 2000/04/27 09:29:53 fca
-Reverting to version 1.6.2
-
-Revision 1.6.2.1 1999/12/03 16:38:51 fca
-Correct overlap in magnet
-
-Revision 1.6 1999/09/29 09:24:30 fca
-Introduction of the Copyright and cvs Log
-
-*/
+/* $Id$ */
///////////////////////////////////////////////////////////////////////////////
// //
// //
// //
+#include <TVirtualMC.h>
+
+#include "AliConst.h"
#include "AliDIPOv2.h"
+#include "AliMagF.h"
#include "AliRun.h"
-#include "AliConst.h"
ClassImp(AliDIPOv2)
SetMarkerStyle(2);
SetMarkerSize(0.4);
}
-
-//_____________________________________________________________________________
+
void AliDIPOv2::CreateGeometry()
{
//
// Creation of the geometry of the magnetic DIPOLE version 2
//
- // AliMC* gMC = AliMC::GetMC();
+ CreateSpectrometerDipole();
+ CreateCompensatorDipole();
+}
+
+
+//_____________________________________________________________________________
+void AliDIPOv2::CreateSpectrometerDipole()
+{
+ //
+ // Creation of the geometry of the magnetic DIPOLE version 2
+ //
- Float_t cpar[5], tpar[3], ypar[12];
+ Float_t cpar[5], tpar[18], ypar[12];
Float_t dz, dx, dy;
Int_t idrotm[1899];
- Float_t acc_max, the1, phi1, the2, phi2, the3, phi3;
+ Float_t accMax, the1, phi1, the2, phi2, the3, phi3;
Int_t *idtmed = fIdtmed->GetArray()-1799;
- acc_max = 9.; // ANGLE POLAIRE MAXIMUM
+// const Int_t kCoil = 1813;
+// const Int_t kCable= 1811;
+
+ const Int_t kCoil = 1808;
+ const Int_t kCable= 1808;
+
+ accMax = 9.; // ANGLE POLAIRE MAXIMUM
// DIPOLE MAGNET
+ const Float_t kZDipole = 975;
- tpar[0] = 243.55; // 248.5
- tpar[1] = 130.88762;
- tpar[2] = 527.34; //440.;
- tpar[3] = 211.2;
- tpar[4] = 527.34; // 440.;
+ tpar[0] = 0.;
+ tpar[1] = 360.;
+ tpar[2] = 5.;
+ //
+ tpar[3] = -250.55+kZDipole;
+ tpar[4] = 30.5;
+ tpar[5] = 527.34;
+ //
+ tpar[6] = -160.7+kZDipole;
+ tpar[7] = 30.5;
+ tpar[8] = 527.34;
+ //
+ tpar[9] = 30.+kZDipole;
+ tpar[10] = 30.5;
+ tpar[11] = 527.34;
- gMC->Gsvolu("DDIP", "CONE", idtmed[1814], tpar, 5);
+ tpar[12] = 150.8+kZDipole;
+ tpar[13] = 182.4;
+ tpar[14] = 527.34;
+ //
+ tpar[15] = 260.55+kZDipole;
+ tpar[16] = 182.4;
+ tpar[17] = 527.34;
+
+
+ gMC->Gsvolu("DDIP", "PCON", idtmed[1814], tpar, 18);
// COILS
// air - m.f.
cpar[0] = 207.;
cpar[1] = 274.;
cpar[2] = 37.65;
cpar[3] = 119.;
- cpar[4] = 241. ;
+ cpar[4] = 241.;
// coil - high cuts
- gMC->Gsvolu("DC1 ", "TUBS", idtmed[1853], cpar, 5);
+ gMC->Gsvolu("DC1 ", "TUBS", idtmed[kCoil+40], cpar, 5);
cpar[3] = -61.;
cpar[4] = 61.;
- gMC->Gsvolu("DC2 ", "TUBS", idtmed[1853], cpar, 5);
+ gMC->Gsvolu("DC2 ", "TUBS", idtmed[kCoil+40], cpar, 5);
// coil - low cuts cuts
cpar[0] = 207.;
cpar[3] = 119.;
cpar[4] = 241.;
- gMC->Gsvolu("DC3 ", "TUBS", idtmed[1813], cpar, 5);
+ gMC->Gsvolu("DC3 ", "TUBS", idtmed[kCoil], cpar, 5);
cpar[0] = 207.;
cpar[1] = 217;
cpar[3] = -61.;
cpar[4] = 61.;
- gMC->Gsvolu("DC4 ", "TUBS", idtmed[1813], cpar, 5);
+ gMC->Gsvolu("DC4 ", "TUBS", idtmed[kCoil], cpar, 5);
gMC->Gspos("DC3 ", 1, "DC1 ", 0., 0., 0., 0, "ONLY");
gMC->Gspos("DC4 ", 1, "DC2 ", 0., 0., 0., 0, "ONLY");
// dz = 37.65 - 243.55
dz = -205.9-2.45;
dx = 5.;
- gMC->Gspos("DC1 ", 1, "DDIP", dx, 0., dz, 0, "ONLY");
- gMC->Gspos("DC1 ", 2, "DDIP", dx, 0., -dz, 0, "ONLY");
- gMC->Gspos("DC2 ", 1, "DDIP", -dx, 0., dz, 0, "ONLY");
- gMC->Gspos("DC2 ", 2, "DDIP", -dx, 0., -dz, 0, "ONLY");
+ gMC->Gspos("DC1 ", 1, "DDIP", dx, 0., dz+kZDipole, 0, "ONLY");
+ gMC->Gspos("DC1 ", 2, "DDIP", dx, 0., -dz+kZDipole, 0, "ONLY");
+ gMC->Gspos("DC2 ", 1, "DDIP", -dx, 0., dz+kZDipole, 0, "ONLY");
+ gMC->Gspos("DC2 ", 2, "DDIP", -dx, 0., -dz+kZDipole, 0, "ONLY");
the1 = 180.;
phi1 = 0.;
the2 = 90.;
cpar[3] = 270.;
cpar[4] = 360.;
//* coil high cuts
- gMC->Gsvolu("DC11", "TUBS", idtmed[1853], cpar, 5);
+ gMC->Gsvolu("DC11", "TUBS", idtmed[kCoil+40], cpar, 5);
- dx = TMath::Sin(30.5*kDegrad) * -(207.+33.5)+5./TMath::Sin(30.5*kDegrad) ;
+ dx = TMath::Sin(30.5*kDegrad) * -(207.+33.5)+5./TMath::Sin(30.5*kDegrad);
dy = TMath::Cos(30.5*kDegrad) * -(207.+33.5);
dz = cpar[1] - 243.55-2.45;
- gMC->Gspos("DC11", 1, "DDIP", dx, dy, dz, idrotm[1800], "ONLY");
- gMC->Gspos("DC11", 2, "DDIP", dx, dy, -dz, idrotm[1802], "ONLY");
- gMC->Gspos("DC11", 3, "DDIP", -dx, dy, dz, idrotm[1801], "ONLY");
- gMC->Gspos("DC11", 4, "DDIP", -dx, dy, -dz, idrotm[1803], "ONLY");
+ gMC->Gspos("DC11", 1, "DDIP", dx, dy, dz+kZDipole, idrotm[1800], "ONLY");
+ gMC->Gspos("DC11", 2, "DDIP", dx, dy, -dz+kZDipole, idrotm[1802], "ONLY");
+ gMC->Gspos("DC11", 3, "DDIP", -dx, dy, dz+kZDipole, idrotm[1801], "ONLY");
+ gMC->Gspos("DC11", 4, "DDIP", -dx, dy, -dz+kZDipole, idrotm[1803], "ONLY");
cpar[3] = 0.;
cpar[4] = 90.;
//* coil high cuts
- gMC->Gsvolu("DC12", "TUBS", idtmed[1853], cpar, 5);
+ gMC->Gsvolu("DC12", "TUBS", idtmed[kCoil+40], cpar, 5);
- dx = TMath::Sin(30.5*kDegrad) * -(207.+33.5)+5./TMath::Sin(30.5*kDegrad) ;
+ dx = TMath::Sin(30.5*kDegrad) * -(207.+33.5)+5./TMath::Sin(30.5*kDegrad);
dy = TMath::Cos(30.5*kDegrad) *(207.+33.5);
dz = cpar[1] - 243.55-2.45;
- gMC->Gspos("DC12", 1, "DDIP", dx, dy, dz, idrotm[1801], "ONLY");
- gMC->Gspos("DC12", 2, "DDIP", dx, dy, -dz, idrotm[1803], "ONLY");
- gMC->Gspos("DC12", 3, "DDIP", -dx, dy, dz, idrotm[1800], "ONLY");
- gMC->Gspos("DC12", 4, "DDIP", -dx, dy, -dz, idrotm[1802], "ONLY");
+ gMC->Gspos("DC12", 1, "DDIP", dx, dy, dz+kZDipole, idrotm[1801], "ONLY");
+ gMC->Gspos("DC12", 2, "DDIP", dx, dy, -dz+kZDipole, idrotm[1803], "ONLY");
+ gMC->Gspos("DC12", 3, "DDIP", -dx, dy, dz+kZDipole, idrotm[1800], "ONLY");
+ gMC->Gspos("DC12", 4, "DDIP", -dx, dy, -dz+kZDipole, idrotm[1802], "ONLY");
the1 = 90.;
phi1 = 61.;
tpar[0] = 37.65;
tpar[1] = 33.5;
tpar[2] = 145.5;
- gMC->Gsvolu("DL1 ", "BOX ", idtmed[1853], tpar, 3);
+ gMC->Gsvolu("DL1 ", "BOX ", idtmed[kCoil+40], tpar, 3);
// coil - low cuts
tpar[0] = 5.;
dx = 37.65 - 5.;
- gMC->Gsvolu("DL2 ", "BOX ", idtmed[1813], tpar, 3);
+ gMC->Gsvolu("DL2 ", "BOX ", idtmed[kCoil], tpar, 3);
gMC->Gspos("DL2 ", 1, "DL1 ", dx, 0., 0., 0, "ONLY");
dx =-53.62;
dy =-241.26819;
- dz = 0.0;
- gMC->Gspos("DL1 ", 1, "DDIP", dx, dy, dz, idrotm[1804], "ONLY");
- gMC->Gspos("DL1 ", 2, "DDIP", dx, -dy, dz, idrotm[1805], "ONLY");
- gMC->Gspos("DL1 ", 3, "DDIP",-dx, dy, dz, idrotm[1806], "ONLY");
- gMC->Gspos("DL1 ", 4, "DDIP",-dx, -dy, dz, idrotm[1807], "ONLY");
+ dz = 0.;
+ gMC->Gspos("DL1 ", 1, "DDIP", dx, dy, dz+kZDipole, idrotm[1804], "ONLY");
+ gMC->Gspos("DL1 ", 2, "DDIP", dx, -dy, dz+kZDipole, idrotm[1805], "ONLY");
+ gMC->Gspos("DL1 ", 3, "DDIP",-dx, dy, dz+kZDipole, idrotm[1806], "ONLY");
+ gMC->Gspos("DL1 ", 4, "DDIP",-dx, -dy, dz+kZDipole, idrotm[1807], "ONLY");
// Contactor
gMC->Gsvolu("DCO1", "TUBS", idtmed[1818], cpar, 5);
dx = -5.;
dz = 168.25-1.5-1.;
- gMC->Gspos("DCO1", 1, "DDIP", dx, 0, dz, 0, "ONLY");
+ gMC->Gspos("DCO1", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY");
dz = 243.55+4.5+1.5+1.;
- gMC->Gspos("DCO1", 2, "DDIP", dx, 0, dz, 0, "ONLY");
+ gMC->Gspos("DCO1", 2, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY");
// 9.06.2000
gMC->Gsvolu("DCO2", "TUBS", idtmed[1818], cpar, 5);
dx = +5.;
dz = 168.25-1.5-1.;
- gMC->Gspos("DCO2", 1, "DDIP", dx, 0, dz, 0, "ONLY");
+ gMC->Gspos("DCO2", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY");
dz = 243.55+4.5+1.5+1.;
- gMC->Gspos("DCO2", 2, "DDIP", dx, 0, dz, 0, "ONLY");
+ gMC->Gspos("DCO2", 2, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY");
gMC->Gsvolu("DCO3", "TUBS", idtmed[1812], cpar, 5);
dx = -5;
dz = 168.25-0.75;
- gMC->Gspos("DCO3", 1, "DDIP", dx, 0, dz, 0, "ONLY");
+ gMC->Gspos("DCO3", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY");
dz = 243.55+4.5+0.75;
- gMC->Gspos("DCO3", 2, "DDIP", dx, 0, dz, 0, "ONLY");
+ gMC->Gspos("DCO3", 2, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY");
// 9.06.2000
gMC->Gsvolu("DCO4", "TUBS", idtmed[1812], cpar, 5);
dx = +5;
dz = 168.25-0.75;
- gMC->Gspos("DCO4", 1, "DDIP", dx, 0, dz, 0, "ONLY");
- dz = 243.55+4.5+0.75;
- gMC->Gspos("DCO4", 2, "DDIP", dx, 0, dz, 0, "ONLY");
+ gMC->Gspos("DCO4", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY");
+ dz = 243.55+4.5+0.75 ;
+ gMC->Gspos("DCO4", 2, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY");
// G10 face plane
dx = -5;
dz = 243.55+2.25;
- gMC->Gspos("DCO5", 1, "DDIP", dx, 0, dz, 0, "ONLY");
+ gMC->Gspos("DCO5", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY");
// 9.06.2000
gMC->Gsvolu("DCO6", "TUBS", idtmed[1810], cpar, 5);
dx = +5;
- dz = 243.55+2.25;
- gMC->Gspos("DCO6", 1, "DDIP", dx, 0, dz, 0, "ONLY");
+ dz = 243.55+2.25;
+ gMC->Gspos("DCO6", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY");
//Steel supported planes
dx = -5;
dz = 168.25+1.;
- gMC->Gspos("DCO7", 1, "DDIP", dx, 0, dz, 0, "ONLY");
+ gMC->Gspos("DCO7", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY");
// 9.06.2000
cpar[0] = 274.+1.5+2.;
dx = +5;
dz = 168.25+1.;
- gMC->Gspos("DCO8", 1, "DDIP", dx, 0, dz, 0, "ONLY");
+ gMC->Gspos("DCO8", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY");
//
dx = -5;
dz = 168.25+1.;
- gMC->Gspos("DCO9", 1, "DDIP", dx, 0, dz, 0, "ONLY");
+ gMC->Gspos("DCO9", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY");
// 9.06.2000
dx = +5;
dz = 168.25+1.;
- gMC->Gspos("DCOA", 1, "DDIP", dx, 0, dz, 0, "ONLY");
+ gMC->Gspos("DCOA", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY");
// Sides steel planes
cpar[0] = 207. - 1.5 -2.;
- cpar[1] = 207. - 1.5 ;
+ cpar[1] = 207. - 1.5;
cpar[2] = ((243.55+4.5+1.5)-168.25)/2;
cpar[3] = -50.;
cpar[4] = 50.;
dx=-5.;
dz = ((243.55+4.5+1.5)+168.25)/2;
- gMC->Gspos("DCOB", 1, "DDIP", dx, 0, dz, 0, "ONLY");
- gMC->Gspos("DCOC", 1, "DDIP", dx, 0, dz, 0, "ONLY");
+ gMC->Gspos("DCOB", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY");
+ gMC->Gspos("DCOC", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY");
// 9.06.2000
cpar[0] = 207. - 1.5 -2.;
- cpar[1] = 207. - 1.5 ;
+ cpar[1] = 207. - 1.5;
cpar[2] = ((243.55+4.5+1.5)-168.25)/2;
cpar[3] = 180.-50.;
cpar[4] = 180.+50.;
dx=+5.;
dz = ((243.55+4.5+1.5)+168.25)/2;
- gMC->Gspos("DCOD", 1, "DDIP", dx, 0, dz, 0, "ONLY");
- gMC->Gspos("DCOE", 1, "DDIP", dx, 0, dz, 0, "ONLY");
+ gMC->Gspos("DCOD", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY");
+ gMC->Gspos("DCOE", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY");
// Top and bottom resin planes
- cpar[0] = 207. - 1.5 ;
- cpar[1] = 207. ;
+ cpar[0] = 207. - 1.5;
+ cpar[1] = 207.;
cpar[2] = ((243.55+4.5+1.5)-168.25)/2;
cpar[3] = -50.;
cpar[4] = 50.;
dx=-5.;
dz = ((243.55+4.5+1.5)+168.25)/2;
- gMC->Gspos("DCOF", 1, "DDIP", dx, 0, dz, 0, "ONLY");
- gMC->Gspos("DCOG", 1, "DDIP", dx, 0, dz, 0, "ONLY");
+ gMC->Gspos("DCOF", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY");
+ gMC->Gspos("DCOG", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY");
// 9.06.2000
- cpar[0] = 207. - 1.5 ;
- cpar[1] = 207. ;
+ cpar[0] = 207. - 1.5;
+ cpar[1] = 207.;
cpar[2] = ((243.55+4.5+1.5)-168.25)/2;
cpar[3] = 180.-50.;
dx=+5.;
dz = ((243.55+4.5+1.5)+168.25)/2;
- gMC->Gspos("DCOH", 1, "DDIP", dx, 0, dz, 0, "ONLY");
- gMC->Gspos("DCOI", 1, "DDIP", dx, 0, dz, 0, "ONLY");
+ gMC->Gspos("DCOH", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY");
+ gMC->Gspos("DCOI", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY");
// Aluminum cabels
cpar[3] = -24.;
cpar[4] = 24.;
- gMC->Gsvolu("DCOJ", "TUBS", idtmed[1811], cpar, 5);
+ gMC->Gsvolu("DCOJ", "TUBS", idtmed[kCable], cpar, 5);
// dx = 274. + 1.5 +2. +40.;
// dx = 5. + 1.5 +2. +40.;
// dx = 5. + 1.5 +2.;
dx=-5.;
dz = 168.25 + 5.05 + 5.05/2;
- gMC->Gspos("DCOJ", 1, "DDIP", dx, 0, dz, 0, "ONLY");
+ gMC->Gspos("DCOJ", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY");
dz = 243.55 - 5.05/2;
- gMC->Gspos("DCOJ", 2, "DDIP", dx, 0, dz, 0, "ONLY");
+ gMC->Gspos("DCOJ", 2, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY");
// 9.06.2000
cpar[3] = 180.-24.;
cpar[4] = 180.+24.;
- gMC->Gsvolu("DCOK", "TUBS", idtmed[1811], cpar, 5);
+ gMC->Gsvolu("DCOK", "TUBS", idtmed[kCable], cpar, 5);
// dx = 274. + 1.5 +2. +40.;
// dx = 5. + 1.5 +2. +40.;
// dx = 5. + 1.5 +2.;
dx=+5.;
dz = 168.25 + 5.05 + 5.05/2;
- gMC->Gspos("DCOK", 1, "DDIP", dx, 0, dz, 0, "ONLY");
+ gMC->Gspos("DCOK", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY");
dz = 243.55 - 5.05/2;
- gMC->Gspos("DCOK", 2, "DDIP", dx, 0, dz, 0, "ONLY");
+ gMC->Gspos("DCOK", 2, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY");
// YOKE
// Top and bottom blocks
- ypar[0] = 298.1 ;
+ ypar[0] = 298.1;
ypar[1] = 69.5;
ypar[2] = 155.75;
// iron- high cuts
gMC->Gsvolu("DY1 ", "BOX ", idtmed[1858], ypar, 3);
- ypar[0] = 144.+10. ;
+ ypar[0] = 144.+10.;
ypar[1] = 193.3+10.;
ypar[2] = 5.;
ypar[3] = 155.75;
dy = 365.5;
dz = 4.95;
- gMC->Gspos("DY1 ", 1, "DDIP", 0., dy, -dz, 0, "ONLY");
+ gMC->Gspos("DY1 ", 1, "DDIP", 0., dy, -dz+kZDipole, 0, "ONLY");
the1 = 270.;
phi1 = 0.;
the3 = 0.;
phi3 = 0.;
AliMatrix(idrotm[1808], the1, phi1, the2, phi2, the3, phi3);
- gMC->Gspos("DY1 ", 2, "DDIP", 0., -dy, -dz, idrotm[1808] , "ONLY");
+ gMC->Gspos("DY1 ", 2, "DDIP", 0., -dy, -dz+kZDipole, idrotm[1808] , "ONLY");
// side walls
- // ypar[0] = 579./2. ;
- ypar[0] = 296. ;
+ // ypar[0] = 579./2.;
+ ypar[0] = 296.;
ypar[1] = 0.;
ypar[2] = 0.;
ypar[3] = 155.75;
- ypar[4] = 47.9 ;
+ ypar[4] = 47.9;
ypar[5] = 72.55;
- ypar[6] = 4.3058039629 ;
+ ypar[6] = 4.3058039629;
// z+
ypar[7] = 155.75;
- ypar[8] = 47.9 ;
+ ypar[8] = 47.9;
ypar[9] = 72.55;
- ypar[10] = 4.3058039629 ;
+ ypar[10] = 4.3058039629;
// iron - high cuts
phi1 = 0.;
the2 = 180.;
phi2 = 0.;
- the3 = 90. ;
+ the3 = 90.;
phi3 = 90.;
AliMatrix(idrotm[1810], the1, phi1, the2, phi2, the3, phi3);
dx = 228.875;
dz = - 4.95;
- gMC->Gspos("DY2 ", 1, "DDIP", dx, 0.0, dz, idrotm[1809], "ONLY");
- gMC->Gspos("DY2 ", 2, "DDIP", -dx, 0.0, dz, idrotm[1810], "ONLY");
-
- dz=975.;
- gMC->Gspos("DDIP", 1, "ALIC", 0., 0., dz, 0, "ONLY");
+
+ gMC->Gspos("DY2 ", 1, "DDIP", dx, 0.0, dz+kZDipole, idrotm[1809], "ONLY");
+ gMC->Gspos("DY2 ", 2, "DDIP", -dx, 0.0, dz+kZDipole, idrotm[1810], "ONLY");
+
+ AliMatrix(idrotm[1811], 270., 0., 90., 90., 180., 0.);
+ gMC->Gspos("DDIP", 1, "ALIC", 0., 0., 0., idrotm[1811], "ONLY");
gMC->Gsatt("DDIP", "SEEN", 0);
// gMC->Gsatt("DC21", "SEEN", 0);
// gMC->Gsatt("DC4 ", "SEEN", 0);
}
+
+void AliDIPOv2::CreateCompensatorDipole()
+{
+ //
+ // Geometry of the compensator Dipole MBWMD (was MCB @ SPS)
+ //
+ Int_t *idtmed = fIdtmed->GetArray()-1799;
+ Int_t idrotm[1899];
+//
+ Float_t pbox[3] = {63., 63., 170.};
+
+// Mother volumes
+ gMC->Gsvolu("DCM0", "BOX", idtmed[1814], pbox, 3);
+
+//
+// Mother volume containing lower coil
+ pbox[0] = 58.5/2.;
+ pbox[1] = 30.0;
+ pbox[2] = 152.5;
+
+ gMC->Gsvolu("DCML", "BOX", idtmed[1809], pbox, 3);
+//
+// Base
+ pbox[0] = 62.5;
+ pbox[1] = 15.0;
+ gMC->Gsvolu("DCBA", "BOX", idtmed[1809], pbox, 3);
+//
+// Coil: straight sections, horizontal
+ pbox[0] = 6.;
+ pbox[1] = 11.;
+ pbox[2] = 135.;
+ gMC->Gsvolu("DCH1", "BOX", idtmed[1816], pbox, 3);
+//
+// Coil: straight sections, horizontal
+ pbox[0] = 6.;
+ pbox[1] = 11.;
+ pbox[2] = 135.;
+ gMC->Gsvolu("DCH2", "BOX", idtmed[1816], pbox, 3);
+
+//
+// Mother volume containing upper coil
+ pbox[0] = 8.0;
+ pbox[1] = 17.5;
+ pbox[2] = 135.0;
+ gMC->Gsvolu("DCMU", "BOX", idtmed[1809], pbox, 3);
+
+//
+// Coil: straight sections, vertical
+ pbox[0] = 6.0;
+ pbox[1] = 9.5;
+ pbox[2] = 11.0;
+
+ gMC->Gsvolu("DCCV", "BOX", idtmed[1816], pbox, 3);
+//
+// Coil: circular section
+
+ Float_t ptubs[5];
+ ptubs[0] = 0.;
+ ptubs[1] = 35.;
+ ptubs[2] = 8.;
+ ptubs[3] = 0.;
+ ptubs[4] = 90.;
+// gMC->Gsvolu("DCC1", "TUBS", idtmed[1809], ptubs, 5);
+ ptubs[0] = 13.;
+ ptubs[1] = 35.;
+ ptubs[2] = 6.;
+ ptubs[3] = 0.;
+ ptubs[4] = 90.;
+ gMC->Gsvolu("DCC1", "TUBS", idtmed[1816], ptubs, 5);
+//
+// Clamps
+ Float_t ppgon[10];
+ ppgon[0] = 0.;
+ ppgon[1] = 90.;
+ ppgon[2] = 1.;
+ ppgon[3] = 2.;
+ ppgon[4] = -1.;
+ ppgon[5] = 0.;
+ ppgon[6] = 24.75;
+ ppgon[7] = 1.;
+ ppgon[8] = 0.;
+ ppgon[9] = 24.75;
+ gMC->Gsvolu("DCLA", "PGON", idtmed[1809], ppgon, 10);
+//
+// Assemble all
+//
+ AliMatrix(idrotm[1811], -90., 0., 90., 90., 0., 0.);
+ AliMatrix(idrotm[1812], 0., 0., 90., 90., 90., 0.);
+ AliMatrix(idrotm[1813], 180., 0., 90., 90., 90., 0.);
+ AliMatrix(idrotm[1814], 0., 180., 90., 270., 90., 0.);
+ AliMatrix(idrotm[1815], 180., 180., 90., 270., 90., 0.);
+
+ gMC->Gspos("DCH1", 1, "DCML", 23.25, -13., -17.5, 0, "ONLY");
+ gMC->Gspos("DCCV", 1, "DCM0", 12., 19., -159., 0, "ONLY");
+ gMC->Gspos("DCCV", 2, "DCM0", -12., 19., -159., 0, "ONLY");
+ gMC->Gspos("DCCV", 3, "DCML", 23.25, 20.5, 141.5, 0, "ONLY");
+
+ gMC->Gspos("DCML", 1, "DCM0", -33.25, -2.5, 17.5, 0, "ONLY");
+ gMC->Gspos("DCML", 2, "DCM0", 33.25, -2.5, 17.5, idrotm[1811], "ONLY");
+
+
+ gMC->Gspos("DCH2", 1, "DCMU", 2., 6.5, 0., 0, "ONLY");
+ gMC->Gspos("DCMU", 1, "DCM0", -12., 45., 0., 0, "ONLY");
+ gMC->Gspos("DCMU", 2, "DCM0", 12., 45., 0., idrotm[1811], "ONLY");
+
+// gMC->Gspos("DCC2", 1, "DCC1", 0., 0., 0., 0, "ONLY");
+
+ gMC->Gspos("DCC1", 1, "DCM0", -12., 27.5, 135., idrotm[1812], "ONLY");
+ gMC->Gspos("DCC1", 2, "DCM0", 12., 27.5, 135., idrotm[1812], "ONLY");
+ gMC->Gspos("DCC1", 3, "DCM0", -12., 27.5, -135., idrotm[1813], "ONLY");
+ gMC->Gspos("DCC1", 4, "DCM0", 12., 27.5, -135., idrotm[1813], "ONLY");
+
+ gMC->Gspos("DCC1", 5, "DCM0", 12., 27.5-32.+13., -135., idrotm[1815], "ONLY");
+ gMC->Gspos("DCC1", 6, "DCM0", -12., 27.5-32.+13., -135., idrotm[1815], "ONLY");
+
+ gMC->Gspos("DCC1", 7, "DCML", 23.25, -13+13.+11., 117.5, idrotm[1814], "ONLY");
+
+ gMC->Gspos("DCLA", 1, "DCM0", 20., 27.5, -134., 0, "ONLY");
+ gMC->Gspos("DCLA", 2, "DCM0", 20., 27.5, -44., 0, "ONLY");
+ gMC->Gspos("DCLA", 3, "DCM0", 20., 27.5, 46., 0, "ONLY");
+ gMC->Gspos("DCLA", 4, "DCM0", 20., 27.5, 134., 0, "ONLY");
+
+ gMC->Gspos("DCLA", 5, "DCM0", -20., 27.5, -134., idrotm[1811], "ONLY");
+ gMC->Gspos("DCLA", 6, "DCM0", -20., 27.5, -44., idrotm[1811], "ONLY");
+ gMC->Gspos("DCLA", 7, "DCM0", -20., 27.5, 46., idrotm[1811], "ONLY");
+ gMC->Gspos("DCLA", 8, "DCM0", -20., 27.5, 134., idrotm[1811], "ONLY");
+
+
+ gMC->Gspos("DCBA", 1, "DCM0", 0., -47.5 , 17.5, 0, "ONLY");
+ AliMatrix(idrotm[1816], 270., 0., 90., 90., 180., 0.);
+ gMC->Gspos("DCM0", 1, "ALIC", 0., -6.75, 975., idrotm[1816], "ONLY");
+
+
+}
+
//_____________________________________________________________________________
-void AliDIPOv2::DrawModule()
+void AliDIPOv2::DrawModule() const
{
//
// Draw a shaded view of the muon absorber
//
- AliMC* gMC = AliMC::GetMC();
-
// Set everything unseen
gMC->Gsatt("*", "seen", -1);
//
gMC->Gdman(16, 4, "MAN");
}
+
+
+
//_____________________________________________________________________________
void AliDIPOv2::CreateMaterials()
{
// Create Materials for Magnetic Dipole version 2
//
- Int_t ISXFLD = gAlice->Field()->Integ();
- Float_t SXMGMX = gAlice->Field()->Max();
+ Int_t isxfld = gAlice->Field()->Integ();
+ Float_t sxmgmx = gAlice->Field()->Max();
Float_t asteel[4] = { 55.847,51.9961,58.6934,28.0855 };
Float_t zsteel[4] = { 26.,24.,28.,14. };
// --- Define the various materials for GEANT ---
// Aluminum
- AliMaterial(9, "ALUMINIUM$", 26.98, 13., 2.7, 8.9, 37.2);
+ AliMaterial( 9, "ALUMINIUM$", 26.98, 13., 2.7, 8.9, 37.2);
AliMaterial(29, "ALUMINIUM$", 26.98, 13., 2.7, 8.9, 37.2);
AliMaterial(49, "ALUMINIUM$", 26.98, 13., 2.7, 8.9, 37.2);
AliMaterial(10, "IRON$ ", 55.85, 26., 7.87, 1.76, 17.1);
AliMaterial(30, "IRON$ ", 55.85, 26., 7.87, 1.76, 17.1);
AliMaterial(50, "IRON$ ", 55.85, 26., 7.87, 1.76, 17.1);
-
- // Air
+ // Copper
+ AliMaterial(17, "COPPER$ ", 63.55, 29., 8.96, 1.43, 15.1);
+ AliMaterial(37, "COPPER$ ", 63.55, 29., 8.96, 1.43, 15.1);
+ AliMaterial(57, "COPPER$ ", 63.55, 29., 8.96, 1.43, 15.1);
+ // Air
AliMaterial(15, "AIR$ ", 14.61, 7.3, .001205, 30423.24, 67500);
AliMaterial(35, "AIR$ ", 14.61, 7.3, .001205, 30423.24, 67500);
AliMaterial(55, "AIR$ ", 14.61, 7.3, .001205, 30423.24, 67500);
// ***************
// Aluminum
- AliMedium(9, "ALU_C0 ", 9, 0, ISXFLD, SXMGMX, tmaxfd, stemax, deemax, epsil, stmin);
- AliMedium(29, "ALU_C1 ", 29, 0, ISXFLD, SXMGMX, tmaxfd, stemax, deemax, epsil, stmin);
- AliMedium(49, "ALU_C2 ", 49, 0, ISXFLD, SXMGMX, tmaxfd, stemax, deemax, epsil, stmin);
+ AliMedium(9, "ALU_C0 ", 9, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
+ AliMedium(29, "ALU_C1 ", 29, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
+ AliMedium(49, "ALU_C2 ", 49, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
// Iron
- AliMedium(10, "FE_C0 ", 10, 0, ISXFLD, SXMGMX, tmaxfd, stemax, deemax, epsil, stmin);
- AliMedium(30, "FE_C1 ", 30, 0, ISXFLD, SXMGMX, tmaxfd, stemax, deemax, epsil, stmin);
- AliMedium(50, "FE_C2 ", 50, 0, ISXFLD, SXMGMX, tmaxfd, stemax, deemax, epsil, stmin);
+ AliMedium(10, "FE_C0 ", 10, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
+ AliMedium(30, "FE_C1 ", 30, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
+ AliMedium(50, "FE_C2 ", 50, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
// Air
- AliMedium(15, "AIR_C0 ", 15, 0, ISXFLD, SXMGMX, tmaxfd, stemax, deemax, epsil, stmin);
- AliMedium(35, "AIR_C1 ", 35, 0, ISXFLD, SXMGMX, tmaxfd, stemax, deemax, epsil, stmin);
- AliMedium(55, "AIR_C2 ", 55, 0, ISXFLD, SXMGMX, tmaxfd, stemax, deemax, epsil, stmin);
+ AliMedium(15, "AIR_C0 ", 15, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
+ AliMedium(35, "AIR_C1 ", 35, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
+ AliMedium(55, "AIR_C2 ", 55, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
// Vacuum
- AliMedium(16, "VA_C0 ", 16, 0, ISXFLD, SXMGMX, tmaxfd, stemax, deemax, epsil, stmin);
- AliMedium(36, "VA_C1 ", 36, 0, ISXFLD, SXMGMX, tmaxfd, stemax, deemax, epsil, stmin);
- AliMedium(56, "VA_C2 ", 56, 0, ISXFLD, SXMGMX, tmaxfd, stemax, deemax, epsil, stmin);
+ AliMedium(16, "VA_C0 ", 16, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
+ AliMedium(36, "VA_C1 ", 36, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
+ AliMedium(56, "VA_C2 ", 56, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
// Steel
- AliMedium(19, "ST_C0 ", 19, 0, ISXFLD, SXMGMX, tmaxfd, stemax, deemax, epsil, stmin);
- AliMedium(39, "ST_C1 ", 39, 0, ISXFLD, SXMGMX, tmaxfd, stemax, deemax, epsil, stmin);
- AliMedium(59, "ST_C3 ", 59, 0, ISXFLD, SXMGMX, tmaxfd, stemax, deemax, epsil, stmin);
+ AliMedium(19, "ST_C0 ", 19, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
+ AliMedium(39, "ST_C1 ", 39, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
+ AliMedium(59, "ST_C3 ", 59, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
// Coil
- AliMedium(14, "Coil_C1 ", 14, 0, ISXFLD, SXMGMX, tmaxfd, stemax, deemax, epsil, stmin);
- AliMedium(34, "Coil_C2 ", 34, 0, ISXFLD, SXMGMX, tmaxfd, stemax, deemax, epsil, stmin);
- AliMedium(54, "Coil_C3 ", 54, 0, ISXFLD, SXMGMX, tmaxfd, stemax, deemax, epsil, stmin);
+ AliMedium(14, "Coil_C1 ", 14, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
+ AliMedium(34, "Coil_C2 ", 34, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
+ AliMedium(54, "Coil_C3 ", 54, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
// Resin
- AliMedium(13, "RESIN_C0 ", 13, 0, ISXFLD, SXMGMX, tmaxfd, stemax, deemax, epsil, stmin);
- AliMedium(33, "RESIN_C1 ", 33, 0, ISXFLD, SXMGMX, tmaxfd, stemax, deemax, epsil, stmin);
- AliMedium(53, "RESIN_C2 ", 53, 0, ISXFLD, SXMGMX, tmaxfd, stemax, deemax, epsil, stmin);
+ AliMedium(13, "RESIN_C0 ", 13, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
+ AliMedium(33, "RESIN_C1 ", 33, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
+ AliMedium(53, "RESIN_C2 ", 53, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
// G10
- AliMedium(11, "G10_C0 ", 11, 0, ISXFLD, SXMGMX, tmaxfd, stemax, deemax, epsil, stmin);
- AliMedium(31, "G10_C1 ", 31, 0, ISXFLD, SXMGMX, tmaxfd, stemax, deemax, epsil, stmin);
- AliMedium(51, "G10_C2 ", 51, 0, ISXFLD, SXMGMX, tmaxfd, stemax, deemax, epsil, stmin);
+ AliMedium(11, "G10_C0 ", 11, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
+ AliMedium(31, "G10_C1 ", 31, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
+ AliMedium(51, "G10_C2 ", 51, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
//Aluminium Contactor
- AliMedium(12, "AlCond_C0 ", 12, 0, ISXFLD, SXMGMX, tmaxfd, stemax, deemax, epsil, stmin);
- AliMedium(32, "AlCond_C1 ", 32, 0, ISXFLD, SXMGMX, tmaxfd, stemax, deemax, epsil, stmin);
- AliMedium(52, "AlCond_C2 ", 52, 0, ISXFLD, SXMGMX, tmaxfd, stemax, deemax, epsil, stmin);
+ AliMedium(12, "AlCond_C0 ", 12, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
+ AliMedium(32, "AlCond_C1 ", 32, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
+ AliMedium(52, "AlCond_C2 ", 52, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
+
+ //
+ // Copper
+ AliMedium(17, "Cu_C0 ", 17, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
+ AliMedium(37, "Cu_C1 ", 37, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
+ AliMedium(57, "Cu_C2 ", 57, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
+
}
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff