* provided "as is" without express or implied warranty. *
**************************************************************************/
-/*
-$Log$
-Revision 1.23 2002/10/14 14:57:39 hristov
-Merging the VirtualMC branch to the main development branch (HEAD)
-
-Revision 1.19.4.2 2002/10/11 08:04:28 hristov
-Updating VirtualMC to v3-09-02
-
-Revision 1.22 2002/09/02 15:29:20 morsch
-Gsbool calls to resolve MANY added (I. Hrivnacova).
-
-Revision 1.19.4.1 2002/06/10 15:13:48 hristov
-Merged with v3-08-02
-
-Revision 1.21 2002/05/11 19:14:44 morsch
-PCONE QBEU had last z defined twice.
-
-Revision 1.20 2002/05/02 12:36:43 morsch
-New version of beam-pipe geometry. Ref. AL502206PL
-(used in production readiness report).
-
-Revision 1.19 2002/03/25 12:34:40 morsch
-Obsolete support rollers removed.
-
-Revision 1.18 2002/02/01 18:02:41 morsch
-Material of beam pipe between inner Be piece and forward detectors
-can be set by SetPipeMaterial(mat), mat = kInox, kAlu, kBe ...
-
-Revision 1.17 2001/09/24 13:11:50 morsch
-Ion pump and bellows moved out by 15 cm to make space for forward
-detectors.
-
-Revision 1.16 2001/05/16 14:57:22 alibrary
-New files for folders and Stack
-
-Revision 1.15 2001/05/02 11:50:18 morsch
-New layout of the non-absorber side provided by Y. Viyogi. Not the final design
-but the prsent most realistic.
+/* $Id$ */
-Revision 1.14 2001/01/20 16:56:33 morsch
-Put air in connecting tubes and flanges of vacuum pump.
+//-------------------------------------------------------------------------
+// Beam pipe class
+// Default version
+// Author: A.Morsch
+//-------------------------------------------------------------------------
-Revision 1.13 2001/01/20 16:35:27 morsch
-Increase mother volume for bellows.
-
-Revision 1.12 2000/12/21 16:41:06 morsch
-Coding convention clean-up (RS3)
-
-Revision 1.11 2000/11/28 16:06:57 morsch
-Undulated beam-pipe replaced by Al-Be (40,60) pipe 1.5 mm thick.
-
-Revision 1.10 2000/11/24 13:00:37 morsch
-- Geometry and materials imported from euclid output
-- include comments
-- better struturing of volume tree
-- improved version of flange close to front absorber
-- more realistic pump materials
-- undulated beam pipe imported from v3.
-
-Revision 1.9 2000/10/02 21:28:15 fca
-Removal of useless dependecies via forward declarations
-
-Revision 1.8 2000/06/11 12:37:01 morsch
-Coding rule violations corrected
-
-Revision 1.7 2000/02/23 16:25:24 fca
-AliVMC and AliGeant3 classes introduced
-ReadEuclid moved from AliRun to AliModule
-
-Revision 1.6 1999/09/29 09:24:30 fca
-Introduction of the Copyright and cvs Log
-
-*/
+#include <Riostream.h>
-////////////////////////////////////////////////
-// Beam pipe class /
-////////////////////////////////////////////////
+#include <TGeoManager.h>
+#include <TGeoGlobalMagField.h>
+#include <TSystem.h>
+#include <TVirtualMC.h>
+#include <TArrayI.h>
-#include "AliPIPEv0.h"
-#include "AliRun.h"
#include "AliConst.h"
#include "AliMagF.h"
-#include "AliMC.h"
-#include "TSystem.h"
-
-#include <Riostream.h>
+#include "AliPIPEv0.h"
+#include "AliRun.h"
+#include "AliLog.h"
ClassImp(AliPIPEv0)
+
//_____________________________________________________________________________
-AliPIPEv0::AliPIPEv0()
+AliPIPEv0::AliPIPEv0():
+ fPipeMaterial(kBe)
{
// Constructor
- SetPipeMaterial();
}
//_____________________________________________________________________________
AliPIPEv0::AliPIPEv0(const char *name, const char *title)
- : AliPIPE(name,title)
+ : AliPIPE(name,title),
+ fPipeMaterial(kBe)
{
// Constructor
- SetPipeMaterial();
}
*/
//End_Html
- if(fDebug) printf("%s: Create PIPEv0 geometry \n",ClassName());
+ AliDebugClass(1,"Create PIPEv0 geometry");
Int_t *idtmed = fIdtmed->GetArray();
- Float_t ppcon[84], ptube[3], pbox[3];
+ Float_t ppcon[90], ptube[3], pbox[3];
Int_t i=0;
// Bellow
//
// distance between bellows
- const Float_t dzbb = 9.0;
// total size of bellow section
- const Float_t dzb = 15.0;
+ const Float_t kdzb = 14.6;
// size of undulated region
- const Float_t dzub = 2.0;
+//
+// Absorber side
+//
+// distance between bellows
+ const Float_t kdzbbA = 4.6;
+// total size of bellow section
+ const Float_t kdzbA = 14.6;
+// size of undulated region
+ const Float_t kdzubA = 3.75;
// half-lengths of various beam pipe sections
// central Be-Pipe
//
// Float_t hlenQbt1 = 5.5/2.;
//
-// Pipe outside central region (non-absober side)
- Float_t hlenQbab = 157.5;
+// Pipe outside central region (non-absorber side)
+ Float_t hlenQbab = 157.5 + 23./2.;
//
// Flange non-absorber side
Float_t hlenQb29 = 11.5/2.+1.75 + 5.0;
//
// Bellow element
- Float_t hlenQbe0 = dzb;
+ Float_t hlenQbe0 = kdzbA;
//
// Inox pipe between Be and Bellow (absorber side)
- Float_t hlenQb24[3] = {10.5/2., 1.8, 3.3};
+ Float_t hlenQb24[3] = {11.3/2., 1.8, 3.3};
//
//
Float_t hlenQb28 = (800.-hlenQbbe1-2.*hlenQbab-4.*hlenQb29-2.*hlenQbe0)/2.;
//
// Position of the pump
- Float_t zPump = hlenQbbe1+2.*hlenQbab+2.*hlenQb29+dzb;
+ Float_t zPump = hlenQbbe1+2.*hlenQbab+2.*hlenQb29+kdzb;
//
// Inner beam pipe radius
- Float_t RinBe = 2.9;
- Float_t RinSt = 2.92;
-//
+// Be
+ const Float_t kRinBe = 2.9;
+// Steel
+ const Float_t kRinSt = 2.9;
+// Bellow
+ const Float_t kRinSB = 2.92;
//
- Float_t RoutBe = 2.98;
- Float_t RoutSt = 3.00;
-
+// Outer beam pipe radius
+// Be
+ const Float_t kRoutBe = 2.98;
+// Steel
+ const Float_t kRoutSt = 2.98;
+// Bellow
+ const Float_t kRoutSB = 3.00;
//
Float_t dz;
// Mother Volume QBPM
ppcon[0] = 0;
ppcon[1] = 360;
- ppcon[2] = 18;
-// 1:
+ ppcon[2] = 20;
+// 1
ppcon[3] = -90.;
ppcon[4] = 0.;
- ppcon[5] = 4.4;
+ ppcon[5] = 3.1;
// 2
- ppcon[6] = -90+2.*hlenQb24[2]+2.8+2.*hlenQb24[1];
+ ppcon[6] = -84.;
ppcon[7] = 0.;
- ppcon[8] = 4.4;
+ ppcon[8] = 3.1;
// 3
- ppcon[9] = ppcon[6];
+ ppcon[9] = -84.;
ppcon[10] = 0.;
- ppcon[11] = 4.1;
-// 4
- ppcon[12] = ppcon[9] + 2. + 2.*dzub+0.2;
+ ppcon[11] = 4.4;
+// 4
+ ppcon[12] = -90+2.*hlenQb24[2]+2.8+2.*hlenQb24[1];
ppcon[13] = 0.;
- ppcon[14] = 4.1;
-// 5
- ppcon[15] = ppcon[12];
+ ppcon[14] = 4.4;
+// 5
+ ppcon[15] = ppcon[12];
ppcon[16] = 0.;
- ppcon[17] = 3.2;
+ ppcon[17] = 4.1;
// 6
- ppcon[18] = ppcon[15] + 2.* dzbb-0.4;
+ ppcon[18] = ppcon[15] + 2.5 + 2.*kdzubA+0.2;
ppcon[19] = 0.;
- ppcon[20] = 3.2;
-// 7
- ppcon[21] = ppcon[18];
+ ppcon[20] = 4.1;
+// 7
+ ppcon[21] = ppcon[18];
ppcon[22] = 0.;
- ppcon[23] = 4.1;
-// 8
- ppcon[24] = -44.;
+ ppcon[23] = 3.2;
+// 8
+ ppcon[24] = ppcon[21] + 2.* kdzbbA-0.4;
ppcon[25] = 0.;
- ppcon[26] = 4.1;
+ ppcon[26] = 3.2;
// 9
- ppcon[27] = -44.;
- ppcon[28] = 0;
- ppcon[29] = 3.0;
+ ppcon[27] = ppcon[24];
+ ppcon[28] = 0.;
+ ppcon[29] = 4.1;
// 10
- ppcon[30] = 38.;
- ppcon[31] = 0;
- ppcon[32] = 3.0;
+ ppcon[30] = -44.;
+ ppcon[31] = 0.;
+ ppcon[32] = 4.1;
// 11
- ppcon[33] = 38.;
+ ppcon[33] = -44.;
ppcon[34] = 0;
- ppcon[35] = 3.6;
+ ppcon[35] = 3.06;
// 12
- ppcon[36] = hlenQbbe1+2.*hlenQbab-0.1;
- ppcon[37] = 0.;
- ppcon[38] = 3.6;
+ ppcon[36] = 38.;
+ ppcon[37] = 0;
+ ppcon[38] = 3.06;
// 13
- ppcon[39] = ppcon[36];
- ppcon[40] = 0.;
- ppcon[41] = 3.6;
+ ppcon[39] = 38.;
+ ppcon[40] = 0;
+ ppcon[41] = 4.1;
// 14
- ppcon[42] = ppcon[39]+2.*hlenQb29-5.;
+ ppcon[42] = hlenQbbe1+2.*hlenQbab-0.1;
ppcon[43] = 0.;
- ppcon[44] = 3.6;
+ ppcon[44] = 4.1;
// 15
ppcon[45] = ppcon[42];
ppcon[46] = 0.;
- ppcon[47] = 56.;
+ ppcon[47] = 4.1;
// 16
- ppcon[48] = ppcon[45]+2.*dzb+10.;
+ ppcon[48] = ppcon[45]+2.*hlenQb29-5.;
ppcon[49] = 0.;
- ppcon[50] = 56.;
+ ppcon[50] = 4.1;
// 17
- ppcon[51] = ppcon[48];
+ ppcon[51] = ppcon[48];
ppcon[52] = 0.;
- ppcon[53] = 3.6;
+ ppcon[53] = 56.;
// 18
- ppcon[54] = 800.;
+ ppcon[54] = ppcon[51]+2.*kdzb+10.;
ppcon[55] = 0.;
- ppcon[56] = 3.6;
+ ppcon[56] = 56.;
+// 19
+ ppcon[57] = ppcon[54];
+ ppcon[58] = 0.;
+ ppcon[59] = 4.1;
+// 20
+ ppcon[60] = 800.;
+ ppcon[61] = 0.;
+ ppcon[62] = 4.1;
- gMC->Gsvolu("QBPM", "PCON", idtmed[kAir], ppcon,57);
+ TVirtualMC::GetMC()->Gsvolu("QBPM", "PCON", idtmed[kAir], ppcon,63);
//
//
// The Vacuum
- gMC->Gsvolu("QBVA","TUBE", idtmed[kVac], ptube, 0);
+ TVirtualMC::GetMC()->Gsvolu("QBVA","TUBE", idtmed[kVac], ptube, 0);
ptube[0] = 0.0;
- ptube[1] = RinSt;
+ ptube[1] = kRinSt;
ptube[2] = (90.-hlenQbbe2)/2.;
dz = -90. + ptube[2];
- gMC->Gsposp ("QBVA", 1, "QBPM", 0., 0., dz , 0, "ONLY", ptube, 3);
+ TVirtualMC::GetMC()->Gsposp ("QBVA", 1, "QBPM", 0., 0., dz , 0, "ONLY", ptube, 3);
dz = dz + ptube[2];
- ptube[1] = RinBe;
+ ptube[1] = kRinBe;
ptube[2] = hlenQbbe+hlenQbab;
dz = dz + ptube[2];
- gMC->Gsposp ("QBVA", 2, "QBPM", 0., 0., dz , 0, "ONLY", ptube, 3);
+ TVirtualMC::GetMC()->Gsposp ("QBVA", 2, "QBPM", 0., 0., dz , 0, "ONLY", ptube, 3);
dz = dz + ptube[2];
- ptube[1] = RinSt;
+ ptube[1] = kRinSt;
ptube[2] = (800.-hlenQbbe1-2.*hlenQbab)/2.;
dz = dz + ptube[2];
- gMC->Gsposp ("QBVA", 3, "QBPM", 0., 0., dz , 0, "ONLY", ptube, 3);
+ TVirtualMC::GetMC()->Gsposp ("QBVA", 3, "QBPM", 0., 0., dz , 0, "ONLY", ptube, 3);
//
// Be Pipe in central Alice
- ptube[0] = RinBe;
- ptube[1] = RoutBe;
+ ptube[0] = kRinBe;
+ ptube[1] = kRoutBe;
ptube[2] = hlenQbbe;
- gMC->Gsvolu("QBBE","TUBE", idtmed[kBe], ptube, 3);
+ TVirtualMC::GetMC()->Gsvolu("QBBE","TUBE", idtmed[kBe], ptube, 3);
//
// Support Ring
//
// Mother
- ppcon[0] = 0;
- ppcon[1] = 360;
- ppcon[2] = 6;
-// 1:
- ppcon[3] = -1.;
- ppcon[4] = 3.0;
- ppcon[5] = 3.4;
-// 2
- ppcon[6] = -0.8;
- ppcon[7] = 3.0;
- ppcon[8] = 3.4;
-// 3
- ppcon[9] = -0.8;
- ppcon[10] = 3.0;
- ppcon[11] = 3.2;
-// 4
- ppcon[12] = 0.8;
- ppcon[13] = 3.0;
- ppcon[14] = 3.2;
-// 5
- ppcon[15] = 0.8;
- ppcon[16] = 3.0;
- ppcon[17] = 3.4;
-// 6
- ppcon[18] = 1.0;
- ppcon[19] = 3.0;
- ppcon[20] = 3.4;
+ ptube[0] = kRoutSB;
+ ptube[1] = 4.0;
+ ptube[2] = 0.6;
+ TVirtualMC::GetMC()->Gsvolu("QBSR", "TUBE", idtmed[kAlu], ptube,3);
+ // Inner support
+ ptube[0] = kRoutSB;
+ ptube[1] = 3.5;
+ TVirtualMC::GetMC()->Gsvolu("QBSS", "TUBE", idtmed[kPA], ptube,3);
+ TVirtualMC::GetMC()->Gspos("QBSS", 1, "QBSR", 0.0, 0.0, 0.0, 0, "ONLY");
-
- gMC->Gsvolu("QBSR", "PCON", idtmed[kC], ppcon,21);
- gMC->Gspos("QBSR", 1, "QBPM", 0.0, 0.0, 40., 0, "ONLY");
- gMC->Gspos("QBSR", 2, "QBPM", 0.0, 0.0, 150., 0, "ONLY");
- gMC->Gspos("QBSR", 3, "QBPM", 0.0, 0.0, 260., 0, "ONLY");
- gMC->Gspos("QBSR", 4, "QBPM", 0.0, 0.0,- 46., 0, "ONLY");
+ TVirtualMC::GetMC()->Gspos("QBSR", 1, "QBPM", 0.0, 0.0, 40., 0, "ONLY");
+ TVirtualMC::GetMC()->Gspos("QBSR", 2, "QBPM", 0.0, 0.0, 150., 0, "ONLY");
+ TVirtualMC::GetMC()->Gspos("QBSR", 3, "QBPM", 0.0, 0.0, 260., 0, "ONLY");
+ TVirtualMC::GetMC()->Gspos("QBSR", 4, "QBPM", 0.0, 0.0,- 46., 0, "ONLY");
//
// Flange and Fixed Point: non absorber side
//
ppcon[2] = 4;
// 1:
ppcon[3] = -hlenQb29;
- ppcon[4] = RinSt;
+ ppcon[4] = kRinSt;
ppcon[5] = 5.8;
// 2
ppcon[6] = ppcon[3]+3.6;
- ppcon[7] = RinSt;
+ ppcon[7] = kRinSt;
ppcon[8] = 5.8;
// 3
ppcon[9] = ppcon[6];
- ppcon[10] = RinSt;
+ ppcon[10] = kRinSt;
ppcon[11] = 3.6;
// 4
ppcon[12] = hlenQb29;
- ppcon[13] = RinSt;
+ ppcon[13] = kRinSt;
ppcon[14] = 3.6;
- gMC->Gsvolu("QB29", "PCON", idtmed[kAir], ppcon,15);
+ TVirtualMC::GetMC()->Gsvolu("QB29", "PCON", idtmed[kAir], ppcon,15);
// Flange
- ptube[0] = RinSt;
+ ptube[0] = kRinSt;
ptube[1] = 5.7;
ptube[2] = 1.75;
- gMC->Gsvolu("QF29","TUBE", idtmed[kInox], ptube, 3);
- gMC->Gspos("QF29", 1, "QB29", 0.0, 0.0, -hlenQb29+1.75, 0, "ONLY");
+ TVirtualMC::GetMC()->Gsvolu("QF29","TUBE", idtmed[kInox], ptube, 3);
+ TVirtualMC::GetMC()->Gspos("QF29", 1, "QB29", 0.0, 0.0, -hlenQb29+1.75, 0, "ONLY");
// Pipe
- ptube[0] = RinSt;
- ptube[1] = 3.0;
+ ptube[0] = kRinSt;
+ ptube[1] = 3.06;
ptube[2] = hlenQb29;
- gMC->Gsvolu("QS29","TUBE", idtmed[kInox], ptube, 3);
- gMC->Gspos("QS29", 1, "QB29", 0.0, 0.0, 0., 0, "ONLY");
+ TVirtualMC::GetMC()->Gsvolu("QS29","TUBE", idtmed[kInox], ptube, 3);
+ TVirtualMC::GetMC()->Gspos("QS29", 1, "QB29", 0.0, 0.0, 0., 0, "ONLY");
// Fixed point
- ptube[0] = RinSt;
+ ptube[0] = kRinSt;
ptube[1] = 3.5;
ptube[2] = 0.3;
- gMC->Gsvolu("QP29","TUBE", idtmed[kInox], ptube, 3);
- gMC->Gspos("QP29", 1, "QB29", 0.0, 0.0, -hlenQb29+9.75+3., 0, "ONLY");
+ TVirtualMC::GetMC()->Gsvolu("QP29","TUBE", idtmed[kInox], ptube, 3);
+ TVirtualMC::GetMC()->Gspos("QP29", 1, "QB29", 0.0, 0.0, -hlenQb29+9.75+3., 0, "ONLY");
//
//
// Inox beam pipe: final section on non-absorber side
- ptube[0] = RinSt;
- ptube[1] = RoutSt;
+ ptube[0] = kRinSt;
+ ptube[1] = kRoutSt;
ptube[2] = hlenQb28;
- gMC->Gsvolu("QB28","TUBE", idtmed[kInox], ptube, 3);
-
+ TVirtualMC::GetMC()->Gsvolu("QB28","TUBE", idtmed[kInox], ptube, 3);
+//
+//
+// Air with high transport cuts outside QB28
+ ptube[0] = 25.;
+ ptube[1] = 100.;
+ ptube[2] = hlenQb28;
+ TVirtualMC::GetMC()->Gsvolu("QA28","TUBE", idtmed[kAirHigh], ptube, 3);
+ gGeoManager->SetVolumeAttribute("QA28", "SEEN", 0);
// Al-Be (40-60 wgt%, rho=2.7 g/cm**3) beam pipe
//
// This section is under study (A.M. 1/2/2002)
//
- ptube[0] = RinBe;
+ ptube[0] = kRinBe;
if (fPipeMaterial == kAlu) {
- ptube[1] = 3.0;
+ ptube[1] = 3.06;
} else if (fPipeMaterial == kBe) {
- ptube[1] = RoutBe;
+ ptube[1] = kRoutBe;
} else if (fPipeMaterial == kInox){
- ptube[1] = RoutSt;
+ ptube[1] = kRoutSt;
}
ptube[2] = hlenQbab;
- gMC->Gsvolu("QBAB","TUBE", idtmed[fPipeMaterial], ptube, 3);
+ TVirtualMC::GetMC()->Gsvolu("QBAB","TUBE", idtmed[fPipeMaterial], ptube, 3);
// 2.5 mm thick SS tube for hanging pump
/*
ptube[1] = 3.15;
ptube[2] = hlenQb26;
- gMC->Gsvolu("QB26","TUBE", idtmed[kInox], ptube, 3);
+ TVirtualMC::GetMC()->Gsvolu("QB26","TUBE", idtmed[kInox], ptube, 3);
*/
//
// Bellows
Float_t pconQBE0[33];
pconQBE0[ 0]= 0;
pconQBE0[ 1]= 360;
- pconQBE0[ 2]= 10;
+ pconQBE0[ 2]= 10;
// 1
- pconQBE0[ 3]= -dzb;
- pconQBE0[ 4]= RinSt;
- pconQBE0[ 5]= RoutSt;
-// 2
- pconQBE0[ 6]= -dzb+2.;
- pconQBE0[ 7]= RinSt;
- pconQBE0[ 8]= RoutSt;
+ pconQBE0[ 3] = -kdzbA;
+ pconQBE0[ 4] = kRinSB;
+ pconQBE0[ 5] = kRoutSB;
+//
+ pconQBE0[ 6] = -kdzbA+2.5;
+ pconQBE0[ 7] = kRinSB;
+ pconQBE0[ 8] = kRoutSB;
+// 2
+ pconQBE0[ 9] = -kdzbA+2.5;
+ pconQBE0[10] = kRinSB;
+ pconQBE0[11] = 3.60;
// 3
- pconQBE0[ 9]= -dzb+2.;
- pconQBE0[10]= RinSt;
- pconQBE0[11]= 4.00;
+ pconQBE0[12] = -kdzbA+2.5+2.*kdzubA;
+ pconQBE0[13] = kRinSB;
+ pconQBE0[14] = 3.60;
// 4
- pconQBE0[12]= -dzb+2.+2.*dzub;
- pconQBE0[13]= RinSt;
- pconQBE0[14]= 4.00;
-// 5
- pconQBE0[15]= -dzb+2.+2.*dzub;
- pconQBE0[16]= RinSt;
- pconQBE0[17]= RoutSt;
+ pconQBE0[15] = -kdzbA+2.5+2.*kdzubA;
+ pconQBE0[16] = kRinSB;
+ pconQBE0[17] = kRoutSB;
+// 5
+ pconQBE0[18] = -kdzbA+2.5+2.*kdzubA+2.*kdzbbA;
+ pconQBE0[19] = kRinSB;
+ pconQBE0[20] = kRoutSB;
// 6
- pconQBE0[18]= -dzb+2.+2.*dzub+2.*dzbb;
- pconQBE0[19]= RinSt;
- pconQBE0[20]= RoutSt;
-// 7
- pconQBE0[21]= -dzb+2.+2.*dzub+2.*dzbb;
- pconQBE0[22]= RinSt;
- pconQBE0[23]= 4.00;
+ pconQBE0[21] = -kdzbA+2.5+2.*kdzubA+2.*kdzbbA;
+ pconQBE0[22] = kRinSB;
+ pconQBE0[23] = 3.60;
+// 7
+ pconQBE0[24] = -kdzbA+2.5+4.*kdzubA+2.*kdzbbA;
+ pconQBE0[25] = kRinSB;
+ pconQBE0[26] = 3.60;
// 8
- pconQBE0[24]= -dzb+2.+4.*dzub+2.*dzbb;
- pconQBE0[25]= RinSt;
- pconQBE0[26]= 4.00;
-// 9
- pconQBE0[27]= -dzb+2.+4.*dzub+2.*dzbb;
- pconQBE0[28]= RinSt;
- pconQBE0[29]= RoutSt;
-// 10
- pconQBE0[30]= +dzb;
- pconQBE0[31]= RinSt;
- pconQBE0[32]= RoutSt;
- gMC->Gsvolu("QBE0", "PCON", idtmed[kAir], pconQBE0, 33);
+ pconQBE0[27] = -kdzbA+2.5+4.*kdzubA+2.*kdzbbA;
+ pconQBE0[28] = kRinSB;
+ pconQBE0[29] = kRoutSB;
+// 9
+ pconQBE0[30] = -kdzbA+5.0+4.*kdzubA+2.*kdzbbA;
+ pconQBE0[31] = kRinSB;
+ pconQBE0[32] = kRoutSB;
+
+ TVirtualMC::GetMC()->Gsvolu("QBE0", "PCON", idtmed[kAir], pconQBE0, 33);
//
// Undulated piece mother
- ptube[0] = RinSt;
- ptube[1] = 4.00;
- ptube[2] = dzub;
- gMC->Gsvolu("QBEM","TUBE", idtmed[kAir], ptube, 3);
- dz = -dzb+2.+dzub;
- gMC->Gspos("QBEM", 2 ,"QBE0", 0.0, 0.0, dz, 0 , "ONLY");
- gMC->Gspos("QBEM", 1 ,"QBE0", 0.0, 0.0, -dz, idrotm[2012], "ONLY");
+ ptube[0] = kRinSB;
+ ptube[1] = 3.60;
+ ptube[2] = kdzubA;
+ TVirtualMC::GetMC()->Gsvolu("QBEM","TUBE", idtmed[kAir], ptube, 3);
+ dz = -kdzbA+kdzubA+2.5;
+ TVirtualMC::GetMC()->Gspos("QBEM", 2 ,"QBE0", 0.0, 0.0, dz, 0 , "ONLY");
+ TVirtualMC::GetMC()->Gspos("QBEM", 1 ,"QBE0", 0.0, 0.0, -dz, idrotm[2012], "ONLY");
//
Float_t pund[30];
Float_t uw = 0.02;
- Float_t ur = 2.*dzub-12.*uw;
- Float_t uz = ur/13.;
+ Float_t ur = 2.*kdzubA-36.*uw;
+ Float_t uz = ur/37.;
Float_t ut = uz+uw;
pund[ 0] = 0;
pund[ 2] = 8;
pund[ 3] = -ut;
- pund[ 4] = RinSt;
- pund[ 5] = RinSt+uw;
+ pund[ 4] = kRinSB;
+ pund[ 5] = kRinSB+uw;
pund[ 6] = -ut+uz;
pund[ 7] = pund[4];
pund[ 9] = pund[6];
pund[10] = pund[4];
- pund[11] = 4.0;
+ pund[11] = 3.6;
pund[12] = pund[9]+uw;
pund[13] = pund[10];
pund[14] = pund[11];
pund[15] = pund[12];
- pund[16] = 4.0-uw;
+ pund[16] = 3.6-uw;
pund[17] = pund[14];
pund[18] = pund[12]+uz;
pund[20] = pund[17];
pund[21] = pund[18];
- pund[22] = RinSt;
+ pund[22] = kRinSB;
pund[23] = pund[20];
pund[24] = pund[21]+uw;
pund[25] = pund[22];
pund[26] = pund[23];
- gMC->Gsvolu("QBEU", "PCON", idtmed[kInox], pund, 27);
+ TVirtualMC::GetMC()->Gsvolu("QBEU", "PCON", idtmed[kInox], pund, 27);
- for (i = 0; i < 6; i++)
+ for (i = 0; i < 18; i++)
{
- dz = -dzub+(1+2*i)*ut;
- gMC->Gspos("QBEU", i+1 ,"QBEM", 0.0, 0.0, dz, 0 , "ONLY");
+ dz = -kdzubA+(1+2*i)*ut;
+ TVirtualMC::GetMC()->Gspos("QBEU", i+1 ,"QBEM", 0.0, 0.0, dz, 0 , "ONLY");
}
- ptube[0] = RinSt;
- ptube[1] = RinSt+uw;
+ ptube[0] = kRinSB;
+ ptube[1] = kRinSB+uw;
ptube[2] = uz;
- gMC->Gsvolu("QBEW","TUBE", idtmed[kInox], ptube, 3);
- gMC->Gspos("QBEW", 1 ,"QBEM", 0.0, 0.0, dzub-uz, 0 , "ONLY");
+ TVirtualMC::GetMC()->Gsvolu("QBEW","TUBE", idtmed[kInox], ptube, 3);
+ TVirtualMC::GetMC()->Gspos("QBEW", 1 ,"QBEM", 0.0, 0.0, kdzubA-uz, 0 , "ONLY");
+
//
// BeamPipe
- gMC->Gsvolu("QBEP","TUBE", idtmed[kInox], ptube, 0);
- ptube[0] = RinSt;
- ptube[1] = RoutSt;
- ptube[2] = 1.;
- gMC->Gsposp("QBEP", 1 ,"QBE0", 0.0, 0.0, -dzb+1., 0 , "ONLY", ptube, 3);
- gMC->Gsposp("QBEP", 2 ,"QBE0", 0.0, 0.0, dzb-1., 0 , "ONLY", ptube, 3);
- ptube[2] = dzbb;
- gMC->Gsposp("QBEP", 3 ,"QBE0", 0.0, 0.0, 0., 0 , "ONLY", ptube, 3);
+ TVirtualMC::GetMC()->Gsvolu("QBEP","TUBE", idtmed[kInox], ptube, 0);
+ ptube[0] = kRinSB;
+ ptube[1] = kRoutSB;
+ ptube[2] = 1.25;
+ TVirtualMC::GetMC()->Gsposp("QBEP", 1 ,"QBE0", 0.0, 0.0, -kdzbA+1.25, 0 , "ONLY", ptube, 3);
+ TVirtualMC::GetMC()->Gsposp("QBEP", 2 ,"QBE0", 0.0, 0.0, kdzbA-1.25, 0 , "ONLY", ptube, 3);
+ ptube[2] = kdzbbA;
+ TVirtualMC::GetMC()->Gsposp("QBEP", 3 ,"QBE0", 0.0, 0.0, 0., 0 , "ONLY", ptube, 3);
//
-// End undulated part
-//
//
// ----> End Bellow
//
//
// first the beryllium section
Float_t zpos = -(hlenQbbe2-hlenQbbe1)/2;
- gMC->Gspos("QBBE", 1, "QBPM", 0., 0., zpos, 0, "ONLY");
+ TVirtualMC::GetMC()->Gspos("QBBE", 1, "QBPM", 0., 0., zpos, 0, "ONLY");
// next meta-metal transition QBT1 on on-absorber side
// zpos = zpos + hlenQbbe + hlenQbt1;
-// gMC->Gspos("QBT1", 1, "QBPM", 0., 0., zpos, 0, "ONLY");
+// TVirtualMC::GetMC()->Gspos("QBT1", 1, "QBPM", 0., 0., zpos, 0, "ONLY");
// Aluminium OR Al-be alloy section
zpos = hlenQbbe1+hlenQbab;
- gMC->Gspos("QBAB", 1, "QBPM", 0.0, 0.0, zpos, 0, "ONLY");
+ TVirtualMC::GetMC()->Gspos("QBAB", 1, "QBPM", 0.0, 0.0, zpos, 0, "ONLY");
//
// inox flange at the start of bellow
zpos = zpos + hlenQbab + hlenQb29;
- gMC->Gspos("QB29", 1, "QBPM", 0.0, 0.0, zpos, idrotm[2012], "ONLY");
+ TVirtualMC::GetMC()->Gspos("QB29", 1, "QBPM", 0.0, 0.0, zpos, idrotm[2012], "ONLY");
//
// bellow section
zpos = zpos + hlenQb29 + hlenQbe0;
- gMC->Gspos("QBE0", 2 ,"QBPM", 0.0, 0.0, zpos, 0, "ONLY");
+ TVirtualMC::GetMC()->Gspos("QBE0", 2 ,"QBPM", 0.0, 0.0, zpos, 0, "ONLY");
//
// inox flange at the end of bellow and start of thick inox for pump
zpos = zpos + hlenQbe0 + hlenQb29;
- gMC->Gspos("QB29", 2, "QBPM", 0.0, 0.0, zpos, 0, "ONLY");
+ TVirtualMC::GetMC()->Gspos("QB29", 2, "QBPM", 0.0, 0.0, zpos, 0, "ONLY");
//
//last inox section till 800 cm
zpos = zpos + hlenQb29 + hlenQb28;
- gMC->Gspos("QB28", 1, "QBPM", 0.0, 0.0, zpos, 0, "ONLY");
+ TVirtualMC::GetMC()->Gspos("QB28", 1, "QBPM", 0.0, 0.0, zpos, 0, "ONLY");
+ TVirtualMC::GetMC()->Gspos("QA28", 1, "ALIC", 0.0, 0.0, zpos, 0, "ONLY");
-//******** end of placement on no-absorber side *********
-
+//******** end of placement on non-absorber side *********
//
// **** Absorber side *****
//
//
-/*
- // metal-metal transition : Be-Alu on absorber side
- // Mother Volume
- ptube[0] = 2.900;
- ptube[1] = 4.200;
- ptube[2] = 2.750;
- gMC->Gsvolu("QBT2","TUBE", idtmed[kAir], ptube, 3);
- // z = 43.3 - 48.8
- gMC->Gspos("QBT2", 1, "QBPM", 0., 0., -hlenQbbe-ptube[2], idrotm[2012], "ONLY");
-
- ptube[0] = 2.900;
- ptube[1] = 3.150;
- ptube[2] = 0.375;
- //
- // Be-part
- gMC->Gsvolu("QB02","TUBE", idtmed[kAlu], ptube, 3);
-
- ptube[1] = 3.000;
- gMC->Gsvolu("QBA2","TUBE", idtmed[kBe], ptube, 3);
-
- gMC->Gspos("QBA2", 1, "QB02", 0., 0., 0, 0, "ONLY");
-// z = -2.75 -> -2.00
- gMC->Gspos("QB02", 1, "QBT2", 0., 0.,-2.75+ptube[2], 0, "ONLY");
-
- // Alu part
- ptube[0] = 2.900;
- ptube[1] = 3.150;
- ptube[2] = 2.375;
-// z = -2.00 -> 2.75
- gMC->Gsvolu("QB04","TUBE", idtmed[kAlu], ptube, 3);
- gMC->Gspos("QB04", 1, "QBT2", 0., 0.,-2.+ptube[2], 0, "ONLY");
-
-
- ptube[0] = 3.15;
- ptube[1] = 3.50;
- ptube[2] = 0.10;
-// z = 2.55 -> 2.75
- gMC->Gsvolu("QB06","TUBE", idtmed[kAlu], ptube, 3);
- gMC->Gspos("QB06", 1, "QBT2", 0., 0., 2.55+ptube[2], 0, "ONLY");
-
-
- // Fixation
- ptube[0] = 0.0;
- ptube[1] = 0.1;
- ptube[2] = 0.5;
-
- gMC->Gsvolu("QBA8","TUBE", idtmed[kInox], ptube, 3);
- gMC->Gspos("QBA8", 1 ,"QBT2", 0.000, 3.650, -1.25, idrotm[2002], "ONLY");
- gMC->Gspos("QBA8", 2 ,"QBT2", 3.161, -1.825, -1.25, idrotm[2001], "ONLY");
- gMC->Gspos("QBA8", 3 ,"QBT2", -3.161, -1.825, -1.25, idrotm[2003], "ONLY");
-
- // Carbon ring
- ptube[0] = 3.15;
- ptube[1] = 4.10;
- ptube[2] = 0.55;
-
- gMC->Gsvolu("QB77","TUBE", idtmed[kC], ptube, 3);
-
- ptube[0] = 3.15;
- ptube[1] = 3.50;
- ptube[2] = 0.10;
- gMC->Gsvolu("QBB7","TUBE", idtmed[kInox], ptube, 3);
- gMC->Gspos("QBB7", 1, "QB77", 0.0, 0.0, 0.55-0.2, 0, "ONLY");
- gMC->Gspos("QB77", 1, "QBT2", 0.0, 0.0, 2., 0, "ONLY");
- */
//
// Beam pipes between elements
-//
-
- gMC->Gsvolu("QB24","TUBE", idtmed[kInox], ptube, 0);
- ptube[0] = RinSt;
- ptube[1] = RoutSt;
+//
+ TVirtualMC::GetMC()->Gsvolu("QB24","TUBE", idtmed[kInox], ptube, 0);
+ ptube[0] = kRinSt;
+ ptube[1] = kRoutSt;
ptube[2] = hlenQb24[0];
- dz = hlenQbbe2 + ptube[2];
- gMC->Gsposp("QB24", 1 ,"QBPM", 0.0, 0.0, -dz, 0, "ONLY", ptube, 3);
+ Float_t bpbe[33];
+ bpbe[ 0] = 0.;
+ bpbe[ 1] = 360.;
+ bpbe[ 2] = 10.;
+ // 1
+ bpbe[ 3] = -hlenQb24[0];
+ bpbe[ 4] = kRinSB;
+ bpbe[ 5] = kRoutSB;
+ // 2
+ bpbe[ 6] = hlenQb24[0] - 5.8;
+ bpbe[ 7] = kRinSB;
+ bpbe[ 8] = kRoutSB;
+ // 3
+ bpbe[ 9] = hlenQb24[0] - 5.8;
+ bpbe[10] = kRinSt;
+ bpbe[11] = 3.05;
+ // 4
+ bpbe[12] = hlenQb24[0] - 4.5;
+ bpbe[13] = kRinSt;
+ bpbe[14] = 3.05;
+ // 5
+ bpbe[15] = hlenQb24[0] - 4.5;
+ bpbe[16] = kRinSt;
+ bpbe[17] = kRoutSt ;
+ // 6
+ bpbe[18] = hlenQb24[0] - 3.5;
+ bpbe[19] = kRinSt;
+ bpbe[20] = kRoutSt ;
+ // 7
+ bpbe[21] = hlenQb24[0] - 3.5;
+ bpbe[22] = kRinSt;
+ bpbe[23] = 3.05;
+ // 8
+ bpbe[24] = hlenQb24[0] - 3.0;
+ bpbe[25] = kRinSt;
+ bpbe[26] = 3.05;
+ // 9
+ bpbe[27] = hlenQb24[0] - 3.0;
+ bpbe[28] = kRinSt;
+ bpbe[29] = kRoutSt;
+ // 10
+ bpbe[30] = hlenQb24[0];
+ bpbe[31] = kRinSt;
+ bpbe[32] = kRoutSt;
+
+ TVirtualMC::GetMC()->Gsvolu("QA24","PCON", idtmed[kInox], bpbe, 33);
+
+ dz = hlenQbbe2 + hlenQb24[0];
+
+ TVirtualMC::GetMC()->Gspos("QA24", 1 ,"QBPM", 0.0, 0.0, -dz, 0, "ONLY");
//
// Bellow on absorber side
- dz = dz+hlenQb24[0] + dzb;
- gMC->Gspos("QBE0", 1 ,"QBPM", 0.0, 0.0, -dz, 0, "ONLY");
+
+ dz = dz+hlenQb24[0] + kdzbA;
+ TVirtualMC::GetMC()->Gspos("QBE0", 1 ,"QBPM", 0.0, 0.0, -dz, 0, "ONLY");
//
ptube[2] = hlenQb24[1];
- dz = dz + dzb + ptube[2];
- gMC->Gsposp("QB24", 2 ,"QBPM", 0.0, 0.0, -dz, 0, "ONLY", ptube, 3);
+ dz = dz + kdzb + ptube[2];
+ TVirtualMC::GetMC()->Gsposp("QB24", 2 ,"QBPM", 0.0, 0.0, -dz, 0, "ONLY", ptube, 3);
dz = dz + ptube[2];
//
// Flange
//
// Mother Volume
- ptube[0] = RinSt;
+ ptube[0] = kRinSB;
ptube[1] = 4.300;
ptube[2] = 1.4;
- gMC->Gsvolu("QFA0","TUBE", idtmed[kInox], ptube, 3);
+ TVirtualMC::GetMC()->Gsvolu("QFA0","TUBE", idtmed[kInox], ptube, 3);
dz = dz + ptube[2];
- gMC->Gspos("QFA0", 1 ,"QBPM", 0.0, 0.0, -dz, 0, "ONLY");
+ TVirtualMC::GetMC()->Gspos("QFA0", 1 ,"QBPM", 0.0, 0.0, -dz, 0, "ONLY");
dz = dz + ptube[2];
//
//
- ptube[0] = RinSt;
- ptube[1] = RoutSt;
+ ptube[0] = kRinSB;
+ ptube[1] = kRoutSB;
ptube[2] = hlenQb24[2];
dz = dz + ptube[2];
- gMC->Gsposp("QB24", 3 ,"QBPM", 0.0, 0.0, -dz, 0, "ONLY", ptube, 3);
-
+ TVirtualMC::GetMC()->Gsposp("QB24", 3 ,"QBPM", 0.0, 0.0, -dz, 0, "ONLY", ptube, 3);
// --- Place the PIPE ghost volume (QBPM) in its mother volume (ALIC)
// by rotating it to 180 deg. and make it invisible
//
- gMC->Gspos("QBPM",1,"ALIC",0,0,0,idrotm[2013], "ONLY");
- gMC->Gsbool("QBPM", "L3DX");
- gMC->Gsbool("QBPM", "L3O3");
- gMC->Gsbool("QBPM", "L3O4");
+ TVirtualMC::GetMC()->Gspos("QBPM",1,"ALIC", 0, 0, 0, 0, "ONLY");
+ TVirtualMC::GetMC()->Gsbool("QBPM", "L3DX");
+ TVirtualMC::GetMC()->Gsbool("QBPM", "L3O3");
+ TVirtualMC::GetMC()->Gsbool("QBPM", "L3O4");
//
pbox[0] = 6.50;
pbox[1] = 6.75;
pbox[2] = 15.60;
- gMC->Gsvolu("QI32","BOX", idtmed[kInox], pbox, 3);
+ TVirtualMC::GetMC()->Gsvolu("QI32","BOX", idtmed[kInox], pbox, 3);
pbox[0] = 5.90;
pbox[1] = 6.15;
pbox[2] = 15.00;
- gMC->Gsvolu("QI42","BOX", idtmed[kGetter], pbox, 3);
- gMC->Gspos("QI42", 1, "QI32", 0.0, 0.0, 0.0, 0, "ONLY");
+ TVirtualMC::GetMC()->Gsvolu("QI42","BOX", idtmed[kGetter], pbox, 3);
+ TVirtualMC::GetMC()->Gspos("QI42", 1, "QI32", 0.0, 0.0, 0.0, 0, "ONLY");
// <-
ptube[0] = 0.0;
ptube[1] = 19.0;
ptube[2] = 2.5;
- gMC->Gsvolu("QI33","TUBE", idtmed[kInox], ptube, 3);
+ TVirtualMC::GetMC()->Gsvolu("QI33","TUBE", idtmed[kInox], ptube, 3);
ptube[0] = 0.0;
ptube[1] = 15.0;
ptube[2] = 2.5;
- gMC->Gsvolu("QI43","TUBE", idtmed[kAir], ptube, 3);
- gMC->Gspos("QI43", 1, "QI33", 0.0, 0.0, 0.0, 0, "ONLY");
+ TVirtualMC::GetMC()->Gsvolu("QI43","TUBE", idtmed[kAir], ptube, 3);
+ TVirtualMC::GetMC()->Gspos("QI43", 1, "QI33", 0.0, 0.0, 0.0, 0, "ONLY");
//
// Connecting tube ->
ptube[0] = 0.0;
- ptube[1] = 5.4;
+ ptube[1] = 4.5;
ptube[2] = 14.6;
- gMC->Gsvolu("QI34","TUBE", idtmed[kInox], ptube, 3);
+ TVirtualMC::GetMC()->Gsvolu("QI34","TUBE", idtmed[kInox], ptube, 3);
ptube[0] = 0.0;
- ptube[1] = 4.8;
+ ptube[1] = 3.9;
ptube[2] = 14.6;
- gMC->Gsvolu("QI44","TUBE", idtmed[kAir], ptube, 3);
- gMC->Gspos("QI44", 1, "QI34", 0.0, 0.0, 0.0, 0, "ONLY");
+ TVirtualMC::GetMC()->Gsvolu("QI44","TUBE", idtmed[kAir], ptube, 3);
+ TVirtualMC::GetMC()->Gspos("QI44", 1, "QI34", 0.0, 0.0, 0.0, 0, "ONLY");
// <-
//
// Flange ->
- ptube[0] = 5.41;
+ ptube[0] = 4.6;
ptube[1] = 7.30;
ptube[2] = 2.15;
- gMC->Gsvolu("QI35","TUBE", idtmed[kInox], ptube, 3);
+ TVirtualMC::GetMC()->Gsvolu("QI35","TUBE", idtmed[kInox], ptube, 3);
// <-
- gMC->Gspos("QI32", 1, "QBPM", 0.0, -44.25, zPump, 0, "ONLY");
- gMC->Gspos("QI33", 1, "QBPM", 0.0, -35.00, zPump,idrotm[2002], "ONLY");
- gMC->Gspos("QI34", 1, "QBPM", 0.0, -17.90, zPump,idrotm[2002], "ONLY");
- gMC->Gspos("QI35", 1, "QBPM", 0.0, -24.35, zPump,idrotm[2002], "ONLY");
+ TVirtualMC::GetMC()->Gspos("QI32", 1, "QBPM", 0.0, -44.25, zPump, 0, "ONLY");
+ TVirtualMC::GetMC()->Gspos("QI33", 1, "QBPM", 0.0, -35.00, zPump,idrotm[2002], "ONLY");
+ TVirtualMC::GetMC()->Gspos("QI34", 1, "QBPM", 0.0, -17.90, zPump,idrotm[2002], "ONLY");
+ TVirtualMC::GetMC()->Gspos("QI35", 1, "QBPM", 0.0, -24.35, zPump,idrotm[2002], "ONLY");
- gMC->Gsatt("QBPM", "SEEN", 1);
- gMC->Gsatt("QBEM", "SEEN", 1);
+ gGeoManager->SetVolumeAttribute("QBPM", "SEEN", 1);
+ gGeoManager->SetVolumeAttribute("QBEM", "SEEN", 1);
}
// Define materials for beam pipe
//
- if(fDebug) printf("%s: Create PIPEv0 materials \n",ClassName());
- Int_t isxfld = gAlice->Field()->Integ();
- Float_t sxmgmx = gAlice->Field()->Max();
+ AliDebugClass(1,"Create PIPEv0 materials");
+ Int_t isxfld = ((AliMagF*)TGeoGlobalMagField::Instance()->GetField())->Integ();
+ Float_t sxmgmx = ((AliMagF*)TGeoGlobalMagField::Instance()->GetField())->Max();
// Steel (Inox)
Float_t asteel[4] = { 55.847,51.9961,58.6934,28.0855 };
Float_t zsteel[4] = { 26.,24.,28.,14. };
Float_t aAlBe[2] = { 26.98, 9.01};
Float_t zAlBe[2] = { 13.00, 4.00};
Float_t wAlBe[2] = { 0.4, 0.6};
-
+ //
+ // Polyamid
+ Float_t aPA[4] = {16., 14., 12., 1.};
+ Float_t zPA[4] = { 8., 7., 6., 1.};
+ Float_t wPA[4] = { 1., 1., 6., 11.};
+ //
+ // Air
+ //
+ Float_t aAir[4]={12.0107,14.0067,15.9994,39.948};
+ Float_t zAir[4]={6.,7.,8.,18.};
+ Float_t wAir[4]={0.000124,0.755267,0.231781,0.012827};
+ Float_t dAir = 1.20479E-3;
+ Float_t dAir1 = 1.20479E-10;
+ //
+ // Kapton
+ //
+ Float_t aKapton[4]={1.00794,12.0107, 14.010,15.9994};
+ Float_t zKapton[4]={1.,6.,7.,8.};
+ Float_t wKapton[4]={0.026362,0.69113,0.07327,0.209235};
+ Float_t dKapton = 1.42;
//
// Berillium
AliMaterial(5, "BERILLIUM$", 9.01, 4., 1.848, 35.3, 36.7);
AliMaterial(9, "ALUMINIUM$", 26.98, 13., 2.7, 8.9, 37.2);
//
// Air
- AliMaterial(15, "AIR$ ", 14.61, 7.3, .001205, 30423.24, 67500.);
+ AliMixture(15, "AIR$", aAir, zAir, dAir, 4, wAir);
+ AliMixture(35, "AIR_HIGH$", aAir, zAir, dAir, 4, wAir);
//
// Vacuum
- AliMaterial(16, "VACUUM$ ", 1e-16, 1e-16, 1e-16, 1e16, 1e16);
+ AliMixture(16, "VACUUM$ ", aAir, zAir, dAir1, 4, wAir);
//
// stainless Steel
AliMixture(19, "STAINLESS STEEL$", asteel, zsteel, 7.88, 4, wsteel);
// Al-Be alloy
//
AliMixture(21, "AlBe$", aAlBe, zAlBe, 2.07, 2, wAlBe);
+ // Polyamid
+ //
+ AliMixture(22, "PA$", aPA, zPA, 1.14, -4, wPA);
+ //
+ // Kapton
+ AliMixture(23, "KAPTON", aKapton, zKapton, dKapton, 4, wKapton);
//
// ****************
// Defines tracking media parameters.
AliMedium(9, "ALU", 9, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
//
// Air
- AliMedium(15, "AIR", 15, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
+ AliMedium(15, "AIR", 15, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
+ AliMedium(35, "AIR_HIFG",35, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
//
// Vacuum
AliMedium(16, "VACUUM", 16, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
//
// AlBe - Aloy
AliMedium(21, "AlBe" , 21, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
+ //
+ // Polyamid
+ AliMedium(22, "PA" , 22, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
+ //
+ // KAPTON
+ AliMedium(23, "KAPTON", 23, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
}
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff