* provided "as is" without express or implied warranty. *
**************************************************************************/
-/*
-$Log$
-Revision 1.8 2002/11/21 16:28:39 alibrary
-Removing AliMCProcess and AliMC
-
-Revision 1.7 2002/11/12 17:06:13 morsch
-Update on recess between stations 4 and 5.
-
-Revision 1.6 2002/10/29 09:53:40 morsch
-Constants start with k. Warnings corrected.
-
-Revision 1.5 2002/10/14 14:57:39 hristov
-Merging the VirtualMC branch to the main development branch (HEAD)
-
-Revision 1.3.2.2 2002/10/11 08:04:28 hristov
-Updating VirtualMC to v3-09-02
-
-Revision 1.4 2002/09/02 15:32:15 morsch
-Gsbool calls to resolve MANY added (I. Hrivnacova)
-
-Revision 1.3 2002/07/25 10:00:08 morsch
-par4 size increased.
-
-Revision 1.2 2002/07/15 08:16:35 morsch
-New shield geometry.
-
-*/
-
+/* $Id$ */
+
+//-------------------------------------------------------------------------
+// MUON shielding class
+// Default version
+// Author: A.Morsch
+//-------------------------------------------------------------------------
+
+#include <TVirtualMC.h>
+#include <TArrayI.h>
+#include <TGeoVolume.h>
+#include <TGeoTube.h>
+#include <TGeoManager.h>
+#include <TGeoMatrix.h>
+#include <TGeoCompositeShape.h>
+#include <TGeoBBox.h>
+#include <TGeoPgon.h>
+#include <TGeoTorus.h>
#include "AliSHILv2.h"
-#include "AliRun.h"
#include "AliConst.h"
-#include "AliALIFE.h"
+#include "AliLog.h"
ClassImp(AliSHILv2)
Float_t dz, dZ;
Int_t *idtmed = fIdtmed->GetArray()-1699;
-
+
+ Int_t idrotm[1799];
+
#include "ABSOSHILConst.h"
#include "SHILConst2.h"
enum {kC=1705, kAl=1708, kFe=1709, kCu=1710, kW=1711, kPb=1712,
kNiCuW=1720, kVacuum=1715, kAir=1714, kConcrete=1716,
- kPolyCH2=1717, kSteel=1709, kInsulation=1713};
+ kPolyCH2=1717, kSteel=1718, kInsulation=1713, kAirMuon = 1774};
+ Int_t i;
+
//
// Material of the rear part of the shield
- Int_t iHeavy=kNiCuW;
+ Int_t iHeavy = kNiCuW;
if (fPbCone) iHeavy=kPb;
-//
-//
-// begin Fluka
- AliALIFE* flukaGeom = new AliALIFE("beamshield.alife", "beamshield_vol.inp");
- Int_t i=0,ifl=0;
- Float_t posfluka[3]={0., 0., 0.};
- Float_t zfluka[12], rfluka1[12], rfluka2[12], rfluka3[12] ;
-//
-// end Fluka
-
-
//
// Mother volume
//
par0[2] = 28.;
Float_t dl=(kZvac12-zstart)/2.;
+ const Float_t kzLength = dl;
+
dz=zstart+dl;
//
// start
par0[4] = 0.;
par0[5] = zstart * TMath::Tan(kAccMin);
// recess station 1
- par0[6] = -dz+kZch11;
+ par0[6] = -dl - zstart + kZch11;
par0[7] = 0.;
- par0[8] = kZch11 * TMath::Tan(kAccMin);
+ par0[8] = 18.2;
par0[9] = par0[6];
par0[10] = 0.;
- par0[11] = 17.9;
+ par0[11] = kR11;
- par0[12] = -dz+kZch12;
+ par0[12] = -dl - zstart + kZch12;
par0[13] = 0.;
- par0[14] = 17.9;
+ par0[14] = kR11;
par0[15] = par0[12];
par0[16] = 0.;
- par0[17] = kZch12 * TMath::Tan(kAccMin);
+ par0[17] = 19.5;
// recess station 2
par0[18] = -dz+kZch21;
par0[19] = 0.;
par0[21] = -dz+kZch21;
par0[22] = 0.;
- par0[23] = 23.;
+ par0[23] = kR21;
par0[24] = -dz+kZch22;
par0[25] = 0.;
- par0[26] = 23.;
+ par0[26] = kR21;
par0[27] = -dz+kZch22;
par0[28] = 0.;
par0[39] = -dz+kZch31;
par0[40] = 0.;
- par0[41] = 29.;
+ par0[41] = 28.8;
par0[42] = -dz+kZch32;
par0[43] = 0.;
- par0[44] = 29.;
+ par0[44] = 28.8;
// start of 1.6 deg cone
par0[45] = -dz+kZch32;
par0[46] = 0.;
par0[51] = -dz+kZch41;
par0[52] = 0.;
- par0[53] = 37.5;
+ par0[53] = 36.9;
par0[54] = -dz+kZch42;
par0[55] = 0.;
- par0[56] = 37.5;
+ par0[56] = 36.9;
par0[57] = -dz+kZch42;
par0[58] = 0.;
par0[63] = -dz+kZch51;
par0[64] = 0.;
- par0[65] = 37.5;
+ par0[65] = 36.9;
par0[66] = -dz+kZch52;
par0[67] = 0.;
- par0[68] = 37.5;
+ par0[68] = 36.9;
par0[69] = -dz+kZch52;
par0[70] = 0.;
- par0[71] = 30.+(kZch52-kZConeE)*TMath::Tan(kThetaOpenPbO);
+ par0[71] = 30.+(kZch52+4.-kZConeE)*TMath::Tan(kThetaOpenPbO);
// end of cone
par0[72] = -dz+kZvac10;
par0[73] = 0.;
- par0[74] = 30.+(kZvac10-kZConeE)*TMath::Tan(kThetaOpenPbO);
+ par0[74] = par0[71];
par0[75] = -dz+kZvac10;
par0[76] = 0.;
gMC->Gsvolu("YMOT", "PCON", idtmed[kVacuum], par0, 87);
dz=zstart+dl;
- gMC->Gspos("YMOT", 1, "ALIC", 0., 0., dz, 0, "ONLY");
- gMC->Gsbool("YMOT","L3DO");
- gMC->Gsbool("YMOT","L3O1");
- gMC->Gsbool("YMOT","L3O2");
-
-//
+ AliMatrix(idrotm[1705], 270., 0., 90., 90., 180., 0.);
dZ=-dl;
+//
+// Dimuon arm mother volumes (YOUT1, YOUT2)
+//
+
+ // Dipole parameters
+ Float_t z01 = -724.45;
+ // Float_t z02 = -814.30;
+ Float_t z05 = -1235.55;
+
+// Before dipole
+//
+
+ Float_t zpos = -zstart - kzLength;
+ Float_t shift_after_absorber = 35;
+ Float_t delta = 1e-06;
+ Float_t rst1 = 120;
+ Float_t rst2 = 150;
+ Float_t rst3 = 252;
+ Float_t rst4 = 252;
+ Float_t rst5 = 304;
+ //Float_t rst6 = 430.;
+ Float_t rst7 = 460.;
+
+ // Float_t zstart2 = zpos + zstart;
+
+ par0[0] = 0.;
+ par0[1] = 360.;
+ par0[2] = 11.;
+
+//
+// start
+ // par0[3] = zpos - ( -dl );
+ // start only after absorber
+ // z = -503.00
+ par0[3] = zpos - ( -dl + shift_after_absorber ) + delta;
+ par0[4] = ( zstart + shift_after_absorber ) * TMath::Tan(kAccMin) + delta;
+ par0[5] = rst1;
+
+// recess station 1
+ // z = -517.70
+ par0[6] = zpos - ( -dl - zstart + kZch11 + delta );
+ par0[7] = 18.2 + delta;
+ par0[8] = rst1;
+
+ // z = -517.70
+ par0[9] = par0[6];
+ par0[10] = kR11 + delta;
+ par0[11] = rst1;
+
+ // z = -553.70
+ par0[12] = zpos - ( -dl - zstart + kZch12 - delta );
+ par0[13] = kR11 + delta;
+ par0[14] = rst1;
+
+ // z = -553.70
+ par0[15] = par0[12];
+ par0[16] = 19.5 + delta;
+ par0[17] = rst1;
+
+// recess station 2
+ // z = -661.30
+ par0[18] = zpos - ( -dz+kZch21 + delta );
+ par0[19] = kZch21 * TMath::Tan(kAccMin) + delta;
+ par0[20] = rst2;
+
+ // z = -661.30
+ par0[21] = par0[18];
+ par0[22] = kR21 + delta;
+ par0[23] = rst2;
+
+ // z = -709.90
+ par0[24] = zpos - ( -dz+kZch22 - delta );
+ par0[25] = kR21 + delta;
+ par0[26] = rst2;
+
+ // z = -709.90
+ par0[27] = par0[24];
+ par0[28] = kZch22 * TMath::Tan(kAccMin) + delta;
+ par0[29] = rst2;
+//
+ // z = -711.00
+ par0[30] = zpos - ( -dz+kZvac6 );
+ par0[31] = kZvac6 * TMath::Tan(kAccMin) + delta;
+ par0[32] = rst2;
+
+ Float_t nextZ = zpos - ( -dz+kZConeE );
+ Float_t nextRin = 30. + delta;
+ Float_t nextRout = rst3;
+ Float_t tgin = ( nextRin - par0[31]) / (nextZ - par0[30]);
+ Float_t tgout = ( nextRout - par0[32])/ (nextZ - par0[30]);
+
+ // z = -724.45
+ par0[33] = z01;
+ par0[34] = par0[31] + (z01 - par0[30]) * tgin;
+ par0[35] = par0[32] + (z01 - par0[30]) * tgout;
+
+ gMC->Gsvolu("YOUT1", "PCON", idtmed[kAirMuon], par0, 36);
+ gMC->Gspos("YOUT1", 1, "ALIC", 0., 0., 0., 0, "ONLY");
+
+
+//
+// After dipole
+//
+
+ par0[0] = 0.;
+ par0[1] = 360.;
+ par0[2] = 14.;
+
+ // z = -1235.55
+ par0[3] = z05;
+ par0[4] = nextRin - (z05 - nextZ) * TMath::Tan(kThetaOpenPbO) + delta ;
+ par0[5] = rst4;
+
+// recess station 4
+ // z = -1259.90
+ par0[6] = zpos - ( -dz+kZch41 + delta );
+ par0[7] = 30.+(kZch41-kZConeE)*TMath::Tan(kThetaOpenPbO) + delta;
+ par0[8] = rst4;
+
+ // z = -1259.90
+ par0[9] = par0[6];
+ par0[10] = 36.9 + delta;
+ par0[11] = rst4;
+
+ // z = -1324.10
+ par0[12] = zpos - ( -dz+kZch42 - delta );
+ par0[13] = 36.9 + delta;
+ par0[14] = rst4;
+
+ // z = -1324.10
+ par0[15] = par0[12];
+ par0[16] = 30.+(kZch42-kZConeE)*TMath::Tan(kThetaOpenPbO) + delta;
+ par0[17] = rst5;
+
+// recess station 5
+
+ // z = -1390.00
+ par0[18] = zpos - ( -dz+kZch51 + delta );
+ par0[19] = 30.+(kZch51-kZConeE)*TMath::Tan(kThetaOpenPbO) + delta;
+ par0[20] = rst5;
+
+ // z = -1390.00
+ par0[21] = par0[18];
+ par0[22] = 36.9 + delta;
+ par0[23] = rst5;
+
+ // z = -1454.20
+ par0[24] = zpos - ( -dz+kZch52 - delta );
+ par0[25] = 36.9 + delta;
+ par0[26] = rst5;
+
+ // z = -1454.20
+ par0[27] = par0[24];
+ par0[28] = 30.+(kZch52+4.-kZConeE)*TMath::Tan(kThetaOpenPbO) + delta;
+ par0[29] = rst5;
+
+// end of cone
+
+ // z = -1466.00
+ par0[30] = zpos - ( -dz+kZvac10 - delta );
+ par0[31] = par0[27];
+ par0[32] = rst7;
+
+ // z = -1466.00
+ par0[33] = par0[30];
+ par0[34] = kR42 + delta;
+ par0[35] = rst7;
+
+ // z = -1800.00
+ par0[36] = zpos - ( -dz+kZvac11 - delta );
+ par0[37] = kR42 + delta;
+ par0[38] = rst7;
+
+ // z = -1800.00
+ par0[39] = par0[36];
+ par0[40] = kR43 + delta;
+ par0[41] = rst7;
+
+ // z = -1900.00
+ par0[42] = zpos - ( -dz+kZvac12 );
+ par0[43] = kR43 + delta;
+ par0[44] = rst7;
+
+ gMC->Gsvolu("YOUT2", "PCON", idtmed[kAirMuon], par0, 45);
+ gMC->Gspos("YOUT2", 1, "ALIC", 0., 0., 0., 0, "ONLY");
+
//
// First section: bellows below and behind front absorber
//
//
par1[ 0] = 0.;
par1[ 1] = 360.;
- par1[ 2] = 14.;
+ par1[ 2] = 15.;
dl=(kZvac4-zstart)/2.;
par1[ 3] = -dl;
par1[ 4] = kRAbs+(zstart-kZOpen) * TMath::Tan(kThetaOpen1);
par1[ 5] = zstart * TMath::Tan(kAccMin);
- par1[ 6] = -dl+dRear1;
- par1[ 7] = par1[4] + dRear1 * TMath::Tan(kThetaOpen1);
- par1[ 8] = kZRear * TMath::Tan(kAccMin);
+ par1[ 6] = -dl-zstart+kZch11;
+ par1[ 7] = par1[4] + (dRear1 + 19.) * TMath::Tan(kThetaOpen1);
+ par1[ 8] = 18.2;
- par1[ 9] = -dl+dRear1;
+ par1[ 9] = par1[6];
par1[10] = par1[7];
par1[11] = kR11;
- par1[12] = -dl+kZvac41-zstart;
- par1[13] = kRAbs + (kZvac41-kZOpen) * TMath::Tan(kThetaOpen1);
+ par1[12] = -dl-zstart+kZch12;
+ par1[13] = par1[10] + 36. * TMath::Tan(kThetaOpen1);
par1[14] = kR11;
- par1[15] = par1[12];
+ par1[15] = -dl+dRear1 + 50.7;
par1[16] = par1[13];
- par1[17] = kR21;
-
+ par1[17] = 19.5;
par1[18] = -dl+kZvac1-zstart;
- par1[19] = kRAbs+ (kZvac1-kZOpen) * TMath::Tan(kThetaOpen1);
- par1[20] = kR21;
-
- par1[21] = par1[18]+kDr11/10.;
- par1[22] = par1[19]+kDr11;
- par1[23] = kR21;
-
+ par1[19] = par1[16] + (par1[18] - par1[15]) * TMath::Tan(kThetaOpen1);
+ par1[20] = (par1[18] +dl +zstart) * TMath::Tan(kAccMin);
- par1[24] = -dl+(kZvac1+kDr11/10.+kDB1-zstart);
- par1[25] = par1[22];
- par1[26] = kR21;
+ par1[21] = -dl+kZvac1-zstart;
+ par1[22] = kRAbs+ (kZvac1-kZOpen) * TMath::Tan(kThetaOpen1);
+ par1[23] = (par1[21] +dl +zstart) * TMath::Tan(kAccMin);
+
- par1[27] = par1[24]+kDr12;
- par1[28] = par1[25]+kDr12;
- par1[29] = kR21;
+ par1[24] = par1[21]+kDr11/10.;
+ par1[25] = par1[22]+kDr11;
+ par1[26] = (par1[24] +dl +zstart) * TMath::Tan(kAccMin);
- par1[30] = par1[27]+kDF1;
- par1[31] = par1[28];
- par1[32] = kR21;
+ par1[27] = -dl+(kZvac1+kDr11/10.+kDB1-zstart);
+ par1[28] = par1[25];
+ par1[29] = (par1[27] +dl +zstart) * TMath::Tan(kAccMin);
- par1[33] = par1[30]+kDr12;
- par1[34] = par1[31]-kDr12;
- par1[35] = kR21;
+ par1[30] = par1[27]+kDr12;
+ par1[31] = par1[28]+kDr12;
+ par1[32] = (par1[30] +dl +zstart) * TMath::Tan(kAccMin);
- par1[36] = par1[33]+kDB1;
- par1[37] = par1[34];
- par1[38] = kR21;
+ par1[33] = par1[30]+kDF1;
+ par1[34] = par1[31];
+ par1[35] = (par1[33] +dl +zstart) * TMath::Tan(kAccMin);
- par1[39] = par1[36]+kDr13;
- par1[40] = par1[37]-kDr13;
- par1[41] = kR21;
+ par1[36] = par1[33]+kDr12;
+ par1[37] = par1[34]-kDr12;
+ par1[38] = (par1[36] +dl +zstart) * TMath::Tan(kAccMin);
- par1[42] = -dl+kZvac4-zstart;
- par1[43] = par1[40];
- par1[44] = kR21;
+ par1[39] = par1[36]+kDB1;
+ par1[40] = par1[37];
+ par1[41] = (par1[39] +dl +zstart) * TMath::Tan(kAccMin);
- Float_t r2 = par1[43];
- Float_t rBox= par1[43]-0.1;
- Float_t rc1 = par1[7];
+ par1[42] = par1[39]+kDr13;
+ par1[43] = par1[40]-kDr13;
+ par1[44] = (par1[42] +dl +zstart) * TMath::Tan(kAccMin);
- gMC->Gsvolu("YGO1", "PCON", idtmed[kNiCuW], par1, 45);
+ par1[45] = -dl+kZvac4-zstart;
+ par1[46] = par1[43];
+ par1[47] = (par1[45] +dl +zstart) * TMath::Tan(kAccMin);
-//
-// begin Fluka
- for (ifl=0; ifl<14; ifl++) {
- zfluka[ifl]=par1[3+3*ifl]+dl+kZRear-kDRear;
- rfluka1[ifl] = par1[4+3*ifl];
- rfluka2[ifl] = par1[5+3*ifl];
- if (ifl > 3) rfluka2[ifl]=rfluka2[ifl]-kDRSteel1;
- }
+ Float_t r2 = par1[46];
+ Float_t rBox= par1[46]-0.1;
-
- Float_t rfluka0[8]={rBox,rBox,rBox,rBox,rBox,rBox,rBox,rBox};
-
- flukaGeom->Comment("1st part: Shield");
-// Use default for first three cones
- flukaGeom->SetDefaultVolume("*ACR02");
- rfluka2[0]=rfluka2[1]=rfluka2[2]=-1;
-//
- flukaGeom->Comment("Shield");
- flukaGeom->PolyCone(rfluka1, rfluka2, zfluka, 12, posfluka, "NIW", "MF", "$SHS");
- flukaGeom->Comment("Vacuum");
- flukaGeom->PolyCone(rfluka0, rfluka1+2, zfluka+2, 8, posfluka, "VACUUM", "MF", "$SHS");
-//
-// end Fluka
+ gMC->Gsvolu("YGO1", "PCON", idtmed[kNiCuW+40], par1, 48);
- for (i=0; i<45; i++) pars1[i] = par1[i];
- for (i=4; i<44; i+=3) pars1[i] = 0.;
+ for (i=0; i<48; i++) pars1[i] = par1[i];
+ for (i=4; i<47; i+=3) pars1[i] = 0.;
- gMC->Gsvolu("YMO1", "PCON", idtmed[kVacuum+40], pars1, 45);
+ gMC->Gsvolu("YMO1", "PCON", idtmed[kVacuum+40], pars1, 48);
gMC->Gspos("YGO1", 1, "YMO1", 0., 0., 0., 0, "ONLY");
dZ+=dl;
gMC->Gspos("YMO1", 1, "YMOT", 0., 0., dZ, 0, "ONLY");
dz=dl-tpar[2]-(kZvac4-kZvac41);
gMC->Gspos("YSE2", 1, "YGO1", 0., 0., dz, 0, "ONLY");
-// begin Fluka
- flukaGeom->Comment("1st part: Steel Envelope");
- flukaGeom->Cylinder(tpar[0], tpar[1], kZRear, kZvac4, posfluka, "NIW", "MF", "$SHS");
-//
-// end Fluka
-
//
// 1st section: vacuum system
//
dz=-dl+(kZvac1-zstart)+kDr11/10.+bsize;
gMC->Gspos("YBM1", 1, "YMO1", 0., 0., dz, 0, "ONLY");
-// dz=dl-kDr13-(kZvac4-kZvac3)-bsize;
-// gMC->Gspos("YBM1", 2, "YMO1", 0., 0., dz, 0, "ONLY");
//
gMC->Gspos("YPS1", 1, "YPF1", 0., 0., 0., 0, "ONLY");
dz=-dl+(kZvac1-zstart)+kDr11/10.+2.*bsize+tpar[2];
gMC->Gspos("YPF1", 1, "YMO1", 0., 0., dz, 0, "ONLY");
-// dz=-dl+(kZvac2-zstart)+kDF1/2.+tpar[2];
-// gMC->Gspos("YPF1", 2, "YMO1", 0., 0., dz, 0, "ONLY");
-
-//
-// begin Fluka
- flukaGeom->Comment("First Bellow");
- Float_t z1=kZvac1+kDr11;
- Float_t z2;
-
- for (i=0; i<10; i++) {
- z2=z1+kEB1;
- flukaGeom->Cylinder(0., kRB1, z1, z2, posfluka, "VACUUM", "MF", "$SHH");
- flukaGeom->Cylinder(kRB1, kRB1+kHB1, z1, z2, posfluka, "STEEL", "MF", "$SHH");
-
- z1=z2;
- z2+=kLB1/2.-kEB1;
- flukaGeom->Cylinder(0., kRB1+kHB1-kEB1, z1, z2, posfluka, "VACUUM", "MF", "$SHH");
- flukaGeom->Cylinder(kRB1+kHB1-kEB1, kRB1+kHB1, z1, z2, posfluka, "STEEL", "MF", "$SHH");
- z1=z2;
- z2=z1+kEB1;
- flukaGeom->Cylinder(0., kRB1, z1, z2, posfluka, "VACUUM", "MF", "$SHH");
- flukaGeom->Cylinder(kRB1, kRB1+kHB1, z1, z2, posfluka, "STEEL", "MF", "$SHH");
- z1=z2;
- z2+=kLB1/2.-kEB1;
- flukaGeom->Cylinder(0., kRB1, z1, z2, posfluka, "VACUUM", "MF", "$SHH");
- flukaGeom->Cylinder(kRB1, kRB1+kEB1, z1, z2, posfluka, "STEEL", "MF", "$SHH");
- flukaGeom->Cylinder(kRB1+kEB1, kRB1+kHB1, z1, z2, posfluka, "AIR", "MF", "$SHH");
- z1=z2;
- }
- flukaGeom->Cylinder(kRB1+kHB1, kRB1+kHB1+0.5, kZvac1+kDr11, z1, posfluka, "AIR", "MF", "$SHH");
- flukaGeom->Cylinder(kRB1+kHB1+0.5, rBox, kZvac1+kDr11, z1, posfluka, "AIR", "MF", "$SHH");
- Float_t zcy1=z1;
-
- flukaGeom->Comment("Second Bellow");
- z1=kZvac3-kDr13;
- for (i=0; i<10; i++) {
- z2=z1-kEB1;
- flukaGeom->Cylinder(0., kRB1, z2, z1, posfluka, "VACUUM", "MF", "$SHH");
- flukaGeom->Cylinder(kRB1, kRB1+kHB1, z2, z1, posfluka, "STEEL", "MF", "$SHH");
- z1=z2;
- z2-=kLB1/2.-kEB1;
- flukaGeom->Cylinder(0., kRB1+kHB1-kEB1, z2, z1, posfluka, "VACUUM", "MF", "$SHH");
- flukaGeom->Cylinder(kRB1+kHB1-kEB1, kRB1+kHB1, z2, z1, posfluka, "STEEL", "MF", "$SHH");
- z1=z2;
- z2=z1-kEB1;
- flukaGeom->Cylinder(0., kRB1, z2, z1, posfluka, "VACUUM", "MF", "$SHH");
- flukaGeom->Cylinder(kRB1, kRB1+kHB1, z2, z1, posfluka, "STEEL", "MF", "$SHH");
- z1=z2;
- z2-=kLB1/2.-kEB1;
- flukaGeom->Cylinder(0., kRB1, z2, z1, posfluka, "VACUUM", "MF", "$SHH");
- flukaGeom->Cylinder(kRB1, kRB1+kEB1, z2, z1, posfluka, "STEEL", "MF", "$SHH");
- flukaGeom->Cylinder(kRB1+kEB1, kRB1+kHB1, z2, z1, posfluka, "AIR", "MF", "$SHH");
- z1=z2;
- }
- flukaGeom->Cylinder(kRB1+kHB1, kRB1+kHB1+0.5, z1, kZvac3-kDr13, posfluka, "AIR", "MF", "$SHH");
- flukaGeom->Cylinder(kRB1+kHB1+0.5, rBox, z1, kZvac3-kDr13, posfluka, "AIR", "MF", "$SHH");
-
- Float_t zcy2=z1;
- flukaGeom->Comment("Flange");
- Float_t zfl=(zcy1+zcy2)/2.;
-
- z1=zfl-kDF1/2.;
- z2=zfl+kDF1/2.;
- flukaGeom->Cylinder(0.,kRF1-2. , z1, z2, posfluka, "VACUUM", "MF", "$SHH");
- flukaGeom->Cylinder(kRF1-2., kRF1 , z1, z2, posfluka, "STEEL", "MF", "$SHH");
- flukaGeom->Cylinder(kRF1, kRF1+0.05 , z1, z2, posfluka, "AIR", "MF", "$SHH");
- flukaGeom->Cylinder(kRF1+0.05, rBox , z1, z2, posfluka, "AIR", "MF", "$SHH");
- z2=z1;
- z1=z2-kDFlange;
- flukaGeom->Cylinder(0.,kRB1 , z1, z2, posfluka, "VACUUM", "MF", "$SHH");
- flukaGeom->Cylinder(kRB1, kRF1 , z1, z2, posfluka, "STEEL", "MF", "$SHH");
- flukaGeom->Cylinder(kRF1, kRF1+0.5 , z1, z2, posfluka, "AIR", "MF", "$SHH");
- flukaGeom->Cylinder(kRF1+0.5, rBox , z1, z2, posfluka, "AIR", "MF", "$SHH");
- z2=z1;
- z1=zcy1;
- flukaGeom->Cylinder(0.,kRB1 , z1, z2, posfluka, "VACUUM", "MF", "$SHH");
- flukaGeom->Cylinder(kRB1, kRB1+0.1 , z1, z2, posfluka, "STEEL", "MF", "$SHH");
- flukaGeom->Cylinder(kRB1+0.1, kRB1+0.6 , z1, z2, posfluka, "AIR", "MF", "$SHH");
- flukaGeom->Cylinder(kRB1+0.6, rBox , z1, z2, posfluka, "AIR", "MF", "$SHH");
-
- z1=zfl+kDF1/2.;
- z2=z1+kDFlange;
- flukaGeom->Cylinder(0.,kRB1 , z1, z2, posfluka, "VACUUM", "MF", "$SHH");
- flukaGeom->Cylinder(kRB1, kRF1 , z1, z2, posfluka, "STEEL", "MF", "$SHH");
- flukaGeom->Cylinder(kRF1, kRF1+0.5 , z1, z2, posfluka, "AIR", "MF", "$SHH");
- flukaGeom->Cylinder(kRF1+0.5, rBox , z1, z2, posfluka, "AIR", "MF", "$SHH");
- z1=z2;
- z2=zcy2;
- flukaGeom->Cylinder(0.,kRB1 , z1, z2, posfluka, "VACUUM", "MF", "$SHH");
- flukaGeom->Cylinder(kRB1, kRB1+0.1 , z1, z2, posfluka, "STEEL", "MF", "$SHH");
- flukaGeom->Cylinder(kRB1+0.1, kRB1+0.6 , z1, z2, posfluka, "AIR", "MF", "$SHH");
- flukaGeom->Cylinder(kRB1+0.6, rBox , z1, z2, posfluka, "AIR", "MF", "$SHH");
-// end Fluka
-//
// Pipe+Heating 1.5 mm
// Heating Jacket 5.0 mm
dz=-dl+cpar0[0];
gMC->Gspos("YV11", 1, "YMO1", 0., 0., dz, 0, "ONLY");
-// begin Fluka
-//
- Float_t rf1[10], rf2[10];
- rf1[0]=0.; rf2[0]=0.;
- rf1[1] = cpar0[1];
- rf2[1] = cpar0[3];
-
-
- rf1[2]=rf1[1]+0.15; rf1[3]=rf1[2]+0.5; rf1[4]=rf1[3]+0.1;
- rf1[5]=par1[4];
- rf2[2]=rf2[1]+0.15; rf2[3]=rf2[2]+0.5; rf2[4]=rf2[3]+0.1;
- rf2[5]=par1[7];
-
- char* materialsA[7]
- = {"VACUUM", "STEEL", "PIPEINSU", "STEEL", "AIR", "AIR"};
- char* fieldsA[7]
- = {"MF", "MF", "MF", "MF", "MF", "MF"};
- char* cutsA[7]
- = {"$SHH","$SHH","$SHH","$SHH","$SHH","$SHH","$SHH"};
-
- flukaGeom->Comment("1st part: Beam pipe lateral struture (left)");
- flukaGeom->OnionCone(rf1, rf2, 6 , zstart, kZvac1, posfluka, materialsA, fieldsA, cutsA);
- for (i=0; i<7; i++) rf1[i]=rf2[i];
- for (i=1; i<7; i++) rf2[i]=rf1[i]+kDr11*TMath::Tan(kThetaOpen1);
- flukaGeom->OnionCone(rf1, rf2, 6 , kZvac1, kZvac1+kDr11, posfluka, materialsA, fieldsA, cutsA);
- flukaGeom->Cone(rc1, rf2[5], rc1, rc1+kDr11, kZvac1 , kZvac1+kDr11, posfluka,"AIR", "MF", "$SHH");
-//
-// end Fluka
-
-
// right side
dTubeS = 0.35;
dVacuS += 0.25;
dz=dl-cpar0[0];
gMC->Gspos("YV12", 1, "YMO1", 0., 0., dz, 0, "ONLY");
-//
-// begin Fluka
- char* materialsB[5]
- = {"VACUUM", "STEEL", "PIPEINSU", "STEEL", "AIR"};
-
- char* fieldsB[5]
- = {"MF", "MF", "MF", "MF", "MF"};
-
- char* cutsB[5]
- = {"$SHH","$SHH","$SHH","$SHH","$SHH"};
-
- rf1[0]=rf2[0]=0.;
- rf1[1]=cpar0[1];
- rf2[1]=cpar0[3];
-
- rf1[2]=rf1[1]+dTubeS; rf1[3]=rf1[2]+kDInsuS; rf1[4]=rf1[3]+kDEnveS;
- rf1[5]=r2;
-
- rf2[2]=rf2[1]+dTubeS; rf2[3]=rf2[2]+kDInsuS; rf2[4]=rf2[3]+kDEnveS;
- rf2[5]=r2;
- flukaGeom->Comment("1st part: Beam pipe lateral structure (right)");
- flukaGeom->OnionCone(rf1, rf2, 6 , kZvac3, kZvac4, posfluka, materialsB, fieldsB, cutsB);
- for (i=0; i<6; i++) rf2[i]=rf1[i];
- for (i=1; i<5; i++) rf1[i]=rf2[i];
- rf1[5]=rf2[5]+kDr13;
- flukaGeom->OnionCone(rf1, rf2, 6 , kZvac3-kDr13, kZvac3, posfluka, materialsB, fieldsB, cutsB);
-
-//
-// end Fluka
//
// Second Section
par2[24] = -dl+(kZch31-kZvac4);
par2[25] = r2+(kZch31-kZvac4-10.) * TMath::Tan(kThetaOpen2);
- par2[26] = 29.;
+ par2[26] = 28.8;
par2[27] = -dl+(kZch32-kZvac4);
par2[28] = r2+(kZch32-kZvac4-10.) * TMath::Tan(kThetaOpen2);
- par2[29] = 29.;
+ par2[29] = 28.8;
par2[30] = -dl+(kZch32-kZvac4);
par2[31] = r2+(kZch32-kZvac4-10.) * TMath::Tan(kThetaOpen2);
gMC->Gsvolu("YGO2", "PCON", idtmed[kSteel+40], par2, 36);
-//
-// begin Fluka
-
- char* materials1[8]
- = {"VACUUM", "STEEL", "PIPEINSU", "STEEL", "AIR", "NIW", "NIW", "STEEL"};
- char* fields1[8]
- = {"MF", "MF", "MF", "MF", "MF", "MF", "MF", "MF"};
- char* cuts1[8]
- = {"$SHH","$SHH","$SHH","$SHH","$SHH","$SHH","$SHH","$SHH"};
-
- flukaGeom->Comment("2nd part: Beam shield lateral struture (0)");
- // until end of recess 1
- rf1[0] = 0.; rf1[1] = r2V; rf1[2] = rf1[1] + dTubeS; rf1[3] = rf1[2] + kDInsuS;
- rf1[4] = rf1[3] + kDEnveS; rf1[5] = r2; rf1[6] = rf1[5]+2.;
- rf1[7] = kR11-kDRSteel1; rf1[8] = kR21;
-
- for (i=1; i<7; i++) rf2[i]=rf1[i]+4.*TMath::Tan(kThetaOpenB);
- rf2[7] = rf1[7];
- rf2[8] = rf1[8];
- flukaGeom->OnionCone(rf1, rf2, 9 , kZvac4, kZvac4+4, posfluka, materials1, fields1, cuts1);
-
- flukaGeom->Comment("2nd part: Beam shield lateral struture (1)");
- // until end of recess 2
- for (i=0; i<9; i++) rf1[i]=rf2[i];
- rf1[7] = kR21-kDRSteel2; rf1[8] = kR21;
- for (i=1; i<9; i++) rf2[i]=rf1[i]+(kZvac6-kZvac4-4.)*TMath::Tan(kThetaOpenB);
- rf2[7] = rf1[7];
- rf2[8] = rf1[8];
- flukaGeom->OnionCone(rf1, rf2, 9 , kZvac4+4, kZvac6, posfluka, materials1, fields1, cuts1);
-
- flukaGeom->Comment("2nd part: Beam shield lateral struture (2)");
- // steel recess
- for (i=0; i<9; i++) rf1[i]=rf2[i];
- rf1[8] = kZvac6*TMath::Tan(kAccMin);
- rf1[7] = kR21-kDRSteel2;
-
- for (i=1; i<9; i++) rf2[i]=rf1[i]+4.*TMath::Tan(kThetaOpenB);
- rf2[7] = rf1[7];
-
- rf2[8] = -(rf1[8]+4.*TMath::Tan(kAccMin));
- rf1[8] = -rf1[8];
-
- flukaGeom->OnionCone(rf1, rf2, 9 , kZvac6, kZvac6+4, posfluka, materials1, fields1, cuts1);
- rf1[8] = -rf1[8];
- rf2[8] = -rf2[8];
-
- flukaGeom->Comment("2nd part: Beam shield lateral struture (3)");
- // until start of lead section
- for (i=0; i<9; i++) rf1[i]=rf2[i];
- for (i=1; i<9; i++) rf2[i]=rf1[i]+(kZPb-kZvac6-4.)*TMath::Tan(kThetaOpenB);
- rf1[7] = rf1[8] - kDRSteel2;
- rf2[8] = rf1[8] + (kZPb-kZvac6-4.)*TMath::Tan(kAccMin);
- rf2[7] = rf2[8] - kDRSteel2;
-
- rf1[8]=-rf1[8];
- rf2[8]=-rf2[8];
- flukaGeom->OnionCone(rf1, rf2, 9 , kZvac6+4, kZPb, posfluka, materials1, fields1, cuts1);
- rf1[8]=-rf1[8];
- rf2[8]=-rf2[8];
-
- flukaGeom->Comment("2nd part: Beam shield lateral struture (4)");
- // until end of 2deg
- materials1[5] = "LEAD";
- materials1[6] = "LEAD";
- for (i=0; i<9; i++) rf1[i]=rf2[i];
- for (i=1; i<9; i++) rf2[i]=rf1[i]+(kZConeE-kZPb)*TMath::Tan(kThetaOpenB);
- rf1[8] = -rf1[8];
- rf2[8] = -30.;
- rf2[7] = 26.;
- flukaGeom->OnionCone(rf1, rf2, 9 , kZPb, kZConeE, posfluka, materials1, fields1, cuts1);
- rf1[8]=-rf1[8];
- rf2[8]=-rf2[8];
-
- flukaGeom->Comment("2nd part: Beam shield lateral struture (4)");
- // until end of this section
- for (i=0; i<9; i++) rf1[i]=rf2[i];
- for (i=1; i<9; i++) rf2[i]=rf1[i]+(kZvac7-kZConeE)*TMath::Tan(kThetaOpenB);
- rf2[8] = 30;
- rf2[7] = 26;
- flukaGeom->OnionCone(rf1, rf2, 9 , kZConeE, kZvac7, posfluka, materials1, fields1, cuts1);
-
- Float_t r3V = rf2[1];
-
-// end Fluka
-
//
// Lead cone
//
parPb[16] = r2+(kZvac7-kZvac4-10.) * TMath::Tan(kThetaOpen2);
parPb[17] = 30.;
- gMC->Gsvolu("YXO2", "PCON", idtmed[kPb], parPb, 18);
+ gMC->Gsvolu("YXO2", "PCON", idtmed[kPb+40], parPb, 18);
gMC->Gspos("YXO2", 1, "YGO2", 0., 0., (kZPb-kZvac4)/2., 0, "ONLY");
//
// Concrete replacing Pb
parW[13] = r2+(kZPb-kZvac4) * TMath::Tan(kThetaOpen2);
parW[14] = kZPb*TMath::Tan(kAccMin)-kDRSteel2;
- gMC->Gsvolu("YYO2", "PCON", idtmed[kNiCuW], parW, 15);
+ gMC->Gsvolu("YYO2", "PCON", idtmed[kNiCuW+40], parW, 15);
gMC->Gspos("YYO2", 1, "YGO2", 0., 0., -(kZvac7-kZPb)/2., 0, "ONLY");
for (i=4; i<35; i+=3) par2[i] = 0;
gMC->Gsvolu("YGO3", "PCON", idtmed[iHeavy+40], par3, 27);
-// begin Fluka
- Float_t rfvacu0[15];
- for (ifl=0; ifl<8; ifl++) {
- zfluka[ifl]=par3[3+3*ifl]+dl+kZvac7;
- rfluka1[ifl] = par3[4+3*ifl];
- rfluka2[ifl] = par3[5+3*ifl]-4.;
- rfluka3[ifl] = par3[5+3*ifl];
- rfvacu0[ifl] = 0.;
- }
- for (i=0; i<8; i++) rfluka0[i]=rBox;
- rfluka0[0]=0.; rfluka0[7]=0.;
-
- flukaGeom->Comment("3rd part: Shield");
- flukaGeom->PolyCone(rfluka1, rfluka2, zfluka, 8, posfluka, "LEAD", "MF", "$SHS");
- flukaGeom->Comment("3rd part: Steel envelope");
- flukaGeom->PolyCone(rfluka2, rfluka3, zfluka, 8, posfluka, "STEEL", "MF", "$SHS");
- flukaGeom->Comment("3rd part: Vacuum");
- flukaGeom->PolyCone(rfluka0+1, rfluka1+1, zfluka+1, 6, posfluka, "AIR", "MF", "$SHH");
-
- flukaGeom->Comment("3rd part: Beam Pipe (left)");
-
- rf1[0]=0.; rf2[0]=0.;
- rf1[1] = r3V;
- rf2[1] = rf1[1]+kDr21*TMath::Tan(kThetaOpenB);
- rf1[2] = rf1[1]+dTubeS; rf1[3]=rf1[2]+kDInsuS; rf1[4]=rf1[3]+kDEnveS;
- rf1[5] = par3[4];
- rf2[2] = rf2[1]+dTubeS; rf2[3]=rf2[2]+kDInsuS; rf2[4]=rf2[3]+kDEnveS;
- rf2[5] = rf1[5]+kDr21;
- flukaGeom->OnionCone(rf1, rf2, 6 , kZvac7, kZvac7+kDr21, posfluka, materialsB, fieldsB, cutsB);
-
-
- flukaGeom->Comment("3rd part: Beam Pipe (right)");
-
- rf1[0] = 0.;
- rf1[1] = rf2[1];
- rf1[2] = rf1[1]+dTubeS; rf1[3]=rf1[2]+kDInsuS; rf1[4]=rf1[3]+kDEnveS;
- rf1[5] = par3[25];
- flukaGeom->OnionCylinder(rf1, 6 , kZvac9-kDr23, kZvac9, posfluka, materialsA, fieldsA, cutsA);
-
-//
- flukaGeom->Comment("First Bellow");
- z1=kZvac7+kDr21;
-
- for (i=0; i<7; i++) {
- z2=z1+kEB2;
- flukaGeom->Cylinder(0., kRB2, z1, z2, posfluka, "VACUUM", "MF", "$SHH");
- flukaGeom->Cylinder(kRB2, kRB2+kHB2, z1, z2, posfluka, "STEEL", "MF", "$SHH");
-
- z1=z2;
- z2+=kLB2/2.-kEB2;
- flukaGeom->Cylinder(0., kRB2+kHB2-kEB2, z1, z2, posfluka, "VACUUM", "MF", "$SHH");
- flukaGeom->Cylinder(kRB2+kHB2-kEB2, kRB2+kHB2, z1, z2, posfluka, "STEEL", "MF", "$SHH");
- z1=z2;
- z2=z1+kEB2;
- flukaGeom->Cylinder(0., kRB2, z1, z2, posfluka, "VACUUM", "MF", "$SHH");
- flukaGeom->Cylinder(kRB2, kRB2+kHB2, z1, z2, posfluka, "STEEL", "MF", "$SHH");
- z1=z2;
- z2+=kLB2/2.-kEB2;
- flukaGeom->Cylinder(0., kRB2, z1, z2, posfluka, "VACUUM", "MF", "$SHH");
- flukaGeom->Cylinder(kRB2, kRB2+kEB2, z1, z2, posfluka, "STEEL", "MF", "$SHH");
- flukaGeom->Cylinder(kRB2+kEB2, kRB2+kHB2, z1, z2, posfluka, "AIR", "MF", "$SHH");
- z1=z2;
- }
- flukaGeom->Cylinder(kRB2+kHB2, kRB2+kHB2+0.2, kZvac7+kDr21, z1, posfluka, "AIR", "MF", "$SHH");
- flukaGeom->Cylinder(kRB2+kHB2+0.2, rBox, kZvac7+kDr21, z1, posfluka, "AIR", "MF", "$SHH");
- zcy1=z1;
-
-
- flukaGeom->Comment("Second Bellow");
- z1=kZvac9-kDr23;
- for (i=0; i<7; i++) {
- z2=z1-kEB2;
- flukaGeom->Cylinder(0., kRB2, z2, z1, posfluka, "VACUUM", "MF", "$SHH");
- flukaGeom->Cylinder(kRB2, kRB2+kHB2, z2, z1, posfluka, "STEEL", "MF", "$SHH");
- z1=z2;
- z2-=kLB2/2.-kEB2;
- flukaGeom->Cylinder(0., kRB2+kHB2-kEB2, z2, z1, posfluka, "VACUUM", "MF", "$SHH");
- flukaGeom->Cylinder(kRB2+kHB2-kEB2, kRB2+kHB2, z2, z1, posfluka, "STEEL", "MF", "$SHH");
- z1=z2;
- z2=z1-kEB2;
- flukaGeom->Cylinder(0., kRB2, z2, z1, posfluka, "VACUUM", "MF", "$SHH");
- flukaGeom->Cylinder(kRB2, kRB2+kHB2, z2, z1, posfluka, "STEEL", "MF", "$SHH");
- z1=z2;
- z2-=kLB2/2.-kEB2;
- flukaGeom->Cylinder(0., kRB2, z2, z1, posfluka, "VACUUM", "MF", "$SHH");
- flukaGeom->Cylinder(kRB2, kRB2+kEB2, z2, z1, posfluka, "STEEL", "MF", "$SHH");
- flukaGeom->Cylinder(kRB2+kEB2, kRB2+kHB2, z2, z1, posfluka, "AIR", "MF", "$SHH");
- z1=z2;
- }
- flukaGeom->Cylinder(kRB2+kHB2, kRB2+kHB2+0.2, z1, kZvac9-kDr23, posfluka, "AIR", "MF", "$SHH");
- flukaGeom->Cylinder(kRB2+kHB2+0.2, rBox, z1, kZvac9-kDr23, posfluka, "AIR", "MF", "$SHH");
-
- zcy2=z1;
- flukaGeom->Comment("Flange");
- zfl=(zcy1+zcy2)/2.;
-
- z1=zfl-kDF2/2.;
- z2=zfl+kDF2/2.;
- flukaGeom->Cylinder(0.,kRF2-2., z1, z2, posfluka, "VACUUM", "MF", "$SHH");
- flukaGeom->Cylinder(kRF2-2., kRF2, z1, z2, posfluka, "STEEL", "MF", "$SHH");
- flukaGeom->Cylinder(kRF2, kRF2+0.02 , z1, z2, posfluka, "AIR", "MF", "$SHH");
- flukaGeom->Cylinder(kRF2+0.02, rBox , z1, z2, posfluka, "AIR", "MF", "$SHH");
- z2=z1;
- z1=z2-kDFlange;
- flukaGeom->Cylinder(0.,kRB2 , z1, z2, posfluka, "VACUUM", "MF", "$SHH");
- flukaGeom->Cylinder(kRB2, kRF2 , z1, z2, posfluka, "STEEL", "MF", "$SHH");
- flukaGeom->Cylinder(kRF2, kRF2+0.2 , z1, z2, posfluka, "AIR", "MF", "$SHH");
- flukaGeom->Cylinder(kRF2+0.2, rBox , z1, z2, posfluka, "AIR", "MF", "$SHH");
- z2=z1;
- z1=zcy1;
- flukaGeom->Cylinder(0.,kRB2 , z1, z2, posfluka, "VACUUM", "MF", "$SHH");
- flukaGeom->Cylinder(kRB2, kRB2+0.1 , z1, z2, posfluka, "STEEL", "MF", "$SHH");
- flukaGeom->Cylinder(kRB2+0.1, kRB2+0.2 , z1, z2, posfluka, "AIR", "MF", "$SHH");
- flukaGeom->Cylinder(kRB2+0.2, rBox , z1, z2, posfluka, "AIR", "MF", "$SHH");
-
- z1=zfl+kDF2/2.;
- z2=z1+kDFlange;
- flukaGeom->Cylinder(0.,kRB2 , z1, z2, posfluka, "VACUUM", "MF", "$SHH");
- flukaGeom->Cylinder(kRB2, kRF2 , z1, z2, posfluka, "STEEL", "MF", "$SHH");
- flukaGeom->Cylinder(kRF2, kRF2+0.2 , z1, z2, posfluka, "AIR", "MF", "$SHH");
- flukaGeom->Cylinder(kRF2+0.2, rBox , z1, z2, posfluka, "AIR", "MF", "$SHH");
- z1=z2;
- z2=zcy2;
- flukaGeom->Cylinder(0.,kRB2 , z1, z2, posfluka, "VACUUM", "MF", "$SHH");
- flukaGeom->Cylinder(kRB2, kRB2+0.1 , z1, z2, posfluka, "STEEL", "MF", "$SHH");
- flukaGeom->Cylinder(kRB2+0.1, kRB2+0.2 , z1, z2, posfluka, "AIR", "MF", "$SHH");
- flukaGeom->Cylinder(kRB2+0.2, rBox , z1, z2, posfluka, "AIR", "MF", "$SHH");
-//
-// end Fluka
-
for (i=4; i<26; i+=3) par3[i] = 0;
gMC->Gsvolu("YMO3", "PCON", idtmed[kVacuum+40], par3, 27);
dz=dl-cpar[0];
gMC->Gspos("YCC4", 1, "YGO4", 0., 0., dz, 0, "ONLY");
-//
-// begin Fluka
-
- Float_t r10=r3+(kZvac10-kZvac9-dHorZ) * TMath::Tan(kThetaOpen3);
- Float_t r11=cpar[1];
-
- flukaGeom->Comment("4th part: Shield");
-
- flukaGeom->Cone(r3, r3, 26.0, 26.0, kZvac9, kZvac9+dHorZ,
- posfluka, "LEAD", "NF", "$SHH");
-
- flukaGeom->Cone(r3, r10, 26.0, 26.0, kZvac9+dHorZ, kZvac10,
- posfluka, "LEAD", "NF", "$SHH");
- flukaGeom->Cone(r10, r11, 30.0, 30.0, kZvac10, kZvac11,
- posfluka, "LEAD", "NF", "$SHH");
- flukaGeom->Cylinder( cpar[1], 30.0, kZvac11, kZvac12,
- posfluka, "LEAD", "NF", "$SHH");
-
-
- flukaGeom->Comment("4th part: Steel Envelope");
- flukaGeom->Cylinder(26.0, 30., kZvac9, kZvac10, posfluka, "STEEL", "NF", "$SHH");
- flukaGeom->Comment("4th part: Closing Cone");
- flukaGeom->Cone(cpar[1]-0.1, cpar[3], cpar[1], cpar[1], kZvac11, kZvac12,
- posfluka, "PORTLAND", "NF", "$SHH");
- flukaGeom->Comment("4th part: VACUUM");
- flukaGeom->Cone(0., 0., cpar[1]-0.1, cpar[3], kZvac11, kZvac12,
- posfluka, "VACUUM", "NF", "$SHH");
-//
-// end Fluka
//
// Steel envelope
//
tpar[0]=kR41-kDRSteel2;
tpar[1]=kR41;
tpar[2]=(kZvac11-kZvac10)/2.;
- gMC->Gsvolu("YS43", "TUBE", idtmed[kPb], tpar, 3);
+ gMC->Gsvolu("YS43", "TUBE", idtmed[kPb+40], tpar, 3);
dz+=tpar[2];
gMC->Gspos("YS43", 1, "YGO4", 0., 0., dz, 0, "ONLY");
//
tpar[0]=kR42-5;
tpar[1]=kR42;
tpar[2]=(kZvac11-kZvac10)/2.;
- gMC->Gsvolu("YPBO", "TUBE", idtmed[kPb], tpar, 3);
+ gMC->Gsvolu("YPBO", "TUBE", idtmed[kPb+40], tpar, 3);
gMC->Gspos("YPBO", 1, "YPBI", 0., 0., 0., 0, "ONLY");
tpar[2]=(zCC2-zCC1)/2.;
tpar[0]=31.;
tpar[1]=kR43;
tpar[2]=(kZvac12-kZvac11)/2.;
- gMC->Gsvolu("YFEI", "TUBE", idtmed[kFe+40], tpar, 3);
+ gMC->Gsvolu("YFEI", "TUBE", idtmed[kSteel+40], tpar, 3);
dz=dl-tpar[2];
gMC->Gspos("YFEI", 1, "YGO4", 0., 0., dz, 0, "ONLY");
tpar[0]=31.;
tpar[1]=kR43;
tpar[2]=2.5;
- gMC->Gsvolu("YFEO", "TUBE", idtmed[kFe], tpar, 3);
+ gMC->Gsvolu("YFEO", "TUBE", idtmed[kSteel], tpar, 3);
dz=-(kZvac12-kZvac11)/2.+tpar[2];
gMC->Gspos("YFEO", 1, "YFEI", 0., 0., dz, 0, "ONLY");
-//
-// Magnet element
-//
- tpar[0]=0.;
- tpar[1]=kR43;
- tpar[2]=50.;
- gMC->Gsvolu("YAEM", "TUBE", idtmed[kAir], tpar, 3);
- tpar[0]=kRAbs;
- tpar[1]=kR43;
- tpar[2]=50.;
- gMC->Gsvolu("YFEM", "TUBE", idtmed[kFe], tpar, 3);
- gMC->Gspos("YFEM", 1, "YAEM", 0., 0., 0., 0, "ONLY");
-
-//
-
- dz=kZvac12+50.;
- gMC->Gspos("YAEM", 1, "ALIC", 0., 0., dz, 0, "ONLY");
//
//
// up to closing cone
- r3V=r3-kDr23+dVacuS-1.6;
+ Float_t r3V=r3-kDr23+dVacuS-1.6;
cpar0[0]=(kZvac11-kZvac9)/2;
cpar0[1]=r3V-dVacuS;
dz=-dl+cpar[0];
gMC->Gspos("YV31", 1, "YMO4", 0., 0., dz, 0, "ONLY");
-//
-// begin Fluka
- flukaGeom->Comment("4th part: Beam pipe lateral structure");
- for (i=0; i<7; i++) fieldsA[i] = "NF";
-
- rf1[0]=0.; rf2[0]=0.;
- rf1[1]=rf2[1]; rf2[1]=rf1[1]+dHorZ*TMath::Tan(kThetaOpen3);
-
- rf1[2]=rf1[1]+dTubeS; rf1[3]=rf1[2]+kDInsuS; rf1[4]=rf1[3]+kDEnveS;
- rf1[5]=r3;
-
- rf2[2]=rf2[1]+dTubeS; rf2[3]=rf2[2]+kDInsuS; rf2[4]=rf2[3]+kDEnveS;
- rf2[5]=r3;
-
- flukaGeom->OnionCone(rf1, rf2, 6 , kZvac9 , kZvac9+dHorZ, posfluka, materialsA, fieldsA, cutsA);
-
- rf1[0]=0.; rf2[0]=0.;
-
- rf1[1]=rf2[1]; rf2[1]=rf1[1]+(kZvac10-kZvac9-dHorZ)*TMath::Tan(kThetaOpen3);
-
- rf1[2]=rf1[1]+dTubeS; rf1[3]=rf1[2]+kDInsuS; rf1[4]=rf1[3]+kDEnveS;
- rf1[5]=r3;
-
- rf2[2]=rf2[1]+dTubeS; rf2[3]=rf2[2]+kDInsuS; rf2[4]=rf2[3]+kDEnveS;
- rf2[5]=r10;
-
-
- flukaGeom->OnionCone(rf1, rf2, 6 , kZvac9+dHorZ, kZvac10, posfluka, materialsA, fieldsA, cutsA);
-
- rf1[0]=0.; rf2[0]=0.;
- rf1[1]=rf2[1]; rf2[1]=rf1[1]+(kZvac11-kZvac10)*TMath::Tan(kThetaOpen3);
-
- rf1[2]=rf1[1]+dTubeS; rf1[3]=rf1[2]+kDInsuS; rf1[4]=rf1[3]+kDEnveS;
- rf1[5]=r10;
- rf2[2]=rf2[1]+dTubeS; rf2[3]=rf2[2]+kDInsuS; rf2[4]=rf2[3]+kDEnveS;
- rf2[5]=r11;
-
- flukaGeom->OnionCone(rf1, rf2, 6 , kZvac10, kZvac11, posfluka, materialsA, fieldsA, cutsA);
-//
-// end Fluka
//
// closing cone
cpar0[0]=(kZvac12-kZvac11)/2;
dz=dl-cpar[0];
gMC->Gspos("YV32", 1, "YMO4", 0., 0., dz, 0, "ONLY");
-//
-//
-// MUON trigger wall
-//
- tpar[0] = 50.;
- tpar[1] = 310.;
- tpar[2] = (kZFilterOut - kZFilterIn) / 2.;
- gMC->Gsvolu("YFIM", "TUBE", idtmed[kFe+40], tpar, 3);
- dz = (kZFilterIn + kZFilterOut) / 2.;
- tpar[2] -= 10.;
- gMC->Gsvolu("YFII","TUBE", idtmed[kFe], tpar, 3);
- gMC->Gspos("YFII", 1, "YFIM", 0., 0., 0., 0, "ONLY");
- gMC->Gspos("YFIM", 1, "ALIC", 0., 0., dz, 0, "ONLY");
-//
-// Shielding close to chamber
-//
-//
- cpar[0]=(kZch11-kZRear)/2.;
- cpar[1]=kR11;
- cpar[2]=kZRear*TMath::Tan(kAccMin);
- cpar[3]=kR11;
- cpar[4]=(kZRear+2.*cpar[0])*TMath::Tan(kAccMin);
- gMC->Gsvolu("YCS1", "CONE", idtmed[kNiCuW], cpar, 5);
- dz=-(kZvac12-zstart)/2.+(kZRear-zstart)+cpar[0];
- gMC->Gspos("YCS1", 1, "YMOT", 0., 0., dz, 0, "ONLY");
-
- cpar[0]=(kZvac4-kZch12)/2.;
- cpar[1]=kR11;
- cpar[2]=kZch12*TMath::Tan(kAccMin);
- cpar[3]=kR11;
- cpar[4]=(kZch12+2.*cpar[0])*TMath::Tan(kAccMin);
- gMC->Gsvolu("YCS3", "CONE", idtmed[kNiCuW], cpar, 5);
- dz=-(kZvac12-zstart)/2.+(kZch12-zstart)+cpar[0];
- gMC->Gspos("YCS3", 1, "YMOT", 0., 0., dz, 0, "ONLY");
-
-
-// Recess station 1
-
- cpar[0]=(kZch12-kZch11)/2.;
- cpar[1]=kR11;
- cpar[2]=18.;
- cpar[3]=kR11;
- cpar[4]=17.9;
- gMC->Gsvolu("YCS2", "CONE", idtmed[kAir], cpar, 5);
- dz=-(kZvac12-zstart)/2.+(kZch11-zstart)+cpar[0];
- gMC->Gspos("YCS2", 1, "YMOT", 0., 0., dz, 0, "ONLY");
-
- Float_t ptubs[5];
- ptubs[0] = kR11;
- ptubs[1] = 17.9;
- ptubs[2] = 0.;
-// phi_min, phi_max
- ptubs[3] = 0.;
- ptubs[4] = 90.;
- gMC->Gsvolu("YCR0", "TUBS", idtmed[kNiCuW], ptubs, 0);
- Int_t idrotm[1799];
-
- AliMatrix(idrotm[1701],90., 0., 90., 90., 0., 0.);
- AliMatrix(idrotm[1702],90., 90., 90., 180., 0., 0.);
- AliMatrix(idrotm[1703],90., 180., 90., 270., 0., 0.);
- AliMatrix(idrotm[1704],90., 270., 90., 0., 0., 0.);
- // Int_t ipos;
-
- dz=-cpar[0];
-// 1.
- ptubs[2]=6.5/2.;
- dz+=ptubs[2];
- gMC->Gsposp("YCR0", 1, "YCS2", 0., 0., dz, idrotm[1701], "ONLY", ptubs, 5);
- gMC->Gsposp("YCR0", 2, "YCS2", 0., 0., dz, idrotm[1703], "ONLY", ptubs, 5);
- dz+=ptubs[2];
- dz+=1.5;
-// 2.
- ptubs[2]=5.0/2.;
- dz+=ptubs[2];
- gMC->Gsposp("YCR0", 3, "YCS2", 0., 0., dz, idrotm[1702], "ONLY", ptubs, 5);
- gMC->Gsposp("YCR0", 4, "YCS2", 0., 0., dz, idrotm[1704], "ONLY", ptubs, 5);
- dz+=ptubs[2];
- dz+=1.5;
-// 3.
- ptubs[2]=5.0/2.;
- dz+=ptubs[2];
- gMC->Gsposp("YCR0", 5, "YCS2", 0., 0., dz, idrotm[1701], "ONLY", ptubs, 5);
- gMC->Gsposp("YCR0", 6, "YCS2", 0., 0., dz, idrotm[1703], "ONLY", ptubs, 5);
- dz+=ptubs[2];
- dz+=1.5;
-// 4.
- ptubs[2]=6.5/2.;
- dz+=ptubs[2];
- gMC->Gsposp("YCR0", 7, "YCS2", 0., 0., dz, idrotm[1702], "ONLY", ptubs, 5);
- gMC->Gsposp("YCR0", 8, "YCS2", 0., 0., dz, idrotm[1704], "ONLY", ptubs, 5);
- dz+=ptubs[2];
- dz+=1.5;
-
+///////////////////////////////////
+// Muon Filter //
+// Drawing ALIP2A__0105 //
+///////////////////////////////////
+ TGeoBBox* shMuonFilterO1 = new TGeoBBox(550./2., 620./2., 120./2.);
+ shMuonFilterO1->SetName("FilterO1");
+ TGeoTube* shMuonFilterI1 = new TGeoTube(0., 50., 121./2.);
+ shMuonFilterI1->SetName("FilterI1");
+ TGeoCompositeShape* shMuonFilterM = new TGeoCompositeShape("YMuonFilterM", "FilterO1-FilterI1");
+ TGeoVolume* voMuonFilterM = new TGeoVolume("YMuonFilterM", shMuonFilterM, gGeoManager->GetMedium("SHIL_ST_C0"));
- cpar[0]=(kZch21-kZvac4)/2.;
- cpar[1]=kR21;
- cpar[2]=kZvac4*TMath::Tan(kAccMin);
- cpar[3]=kR21;
- cpar[4]=(kZvac4+2.*cpar[0])*TMath::Tan(kAccMin);
- gMC->Gsvolu("YCS4", "CONE", idtmed[kNiCuW], cpar, 5);
- dz=-(kZvac12-zstart)/2.+(kZvac4-zstart)+cpar[0];
- gMC->Gspos("YCS4", 1, "YMOT", 0., 0., dz, 0, "ONLY");
-
- cpar[0]=(kZvac6-kZch22)/2.;
- cpar[1]=kR21;
- cpar[2]=kZch22*TMath::Tan(kAccMin);
- cpar[3]=kR21;
- cpar[4]=(kZch22+2.*cpar[0])*TMath::Tan(kAccMin);
- gMC->Gsvolu("YCS6", "CONE", idtmed[kNiCuW], cpar, 5);
- dz=-(kZvac12-zstart)/2.+(kZch22-zstart)+cpar[0];
- gMC->Gspos("YCS6", 1, "YMOT", 0., 0., dz, 0, "ONLY");
+ TGeoBBox* shMuonFilterO2 = new TGeoBBox(550./2., 620./2., 110./2.);
+ shMuonFilterO2->SetName("FilterO2");
+ TGeoTube* shMuonFilterI2 = new TGeoTube(0., 50., 111./2.);
+ shMuonFilterI2->SetName("FilterI2");
+ TGeoCompositeShape* shMuonFilterI = new TGeoCompositeShape("YMuonFilterI", "FilterO2-FilterI2");
+ TGeoVolume* voMuonFilterI = new TGeoVolume("YMuonFilterI", shMuonFilterI, gGeoManager->GetMedium("SHIL_ST_C3"));
+ voMuonFilterI->SetName("YMuonFilterI");
+ voMuonFilterM->AddNode(voMuonFilterI, 1, new TGeoTranslation(0., 0., 0.));
-// Recess station 2
-
- cpar[0]=(kZch22-kZch21)/2.;
- cpar[1]=kR21;
- cpar[2]=23.;
- cpar[3]=kR21;
- cpar[4]=23.;
- gMC->Gsvolu("YCS5", "CONE", idtmed[kAir], cpar, 5);
- dz=-(kZvac12-zstart)/2.+(kZch21-zstart)+cpar[0];
- gMC->Gspos("YCS5", 1, "YMOT", 0., 0., dz, 0, "ONLY");
-
- ptubs[0] = kR21;
- ptubs[1] = 23;
- ptubs[2] = 0.;
- ptubs[3] = 0.;
- ptubs[4] = 90.;
- gMC->Gsvolu("YCR1", "TUBS", idtmed[kNiCuW], ptubs, 0);
-
- dz=-cpar[0];
-// 1.
- ptubs[2]=7.5/2.;
- dz+=ptubs[2];
- gMC->Gsposp("YCR1", 1, "YCS5", 0., 0., dz, idrotm[1701], "ONLY", ptubs, 5);
- gMC->Gsposp("YCR1", 2, "YCS5", 0., 0., dz, idrotm[1703], "ONLY", ptubs, 5);
- dz+=ptubs[2];
- dz+=1.5;
-// 2.
- ptubs[2]=6.0/2.;
- dz+=ptubs[2];
- gMC->Gsposp("YCR1", 3, "YCS5", 0., 0., dz, idrotm[1702], "ONLY", ptubs, 5);
- gMC->Gsposp("YCR1", 4, "YCS5", 0., 0., dz, idrotm[1704], "ONLY", ptubs, 5);
- dz+=ptubs[2];
- dz+=1.5;
-// 3.
- ptubs[2]=6.0/2.;
- dz+=ptubs[2];
- gMC->Gsposp("YCR1", 5, "YCS5", 0., 0., dz, idrotm[1701], "ONLY", ptubs, 5);
- gMC->Gsposp("YCR1", 6, "YCS5", 0., 0., dz, idrotm[1703], "ONLY", ptubs, 5);
- dz+=ptubs[2];
- dz+=1.5;
-// 4.
- ptubs[2]=7.5/2.;
- dz+=ptubs[2];
- gMC->Gsposp("YCR1", 7, "YCS5", 0., 0., dz, idrotm[1702], "ONLY", ptubs, 5);
- gMC->Gsposp("YCR1", 8, "YCS5", 0., 0., dz, idrotm[1704], "ONLY", ptubs, 5);
- dz+=ptubs[2];
- dz+=1.5;
-
-
-//
-// begin Fluka
-/*
- flukaGeom->Cone(R11, R11, -1., -1.,
- kZRear, kZch11, posfluka,"NIW", "MF", "$SHS");
-
- flukaGeom->Cone(R11, R11, -1., -1.,
- kZch11, kZch12, posfluka,"AIR", "MF", "$SHS");
-
- flukaGeom->Cone(R11, R11, -1., -1.,
- kZch12, kZvac4, posfluka,"NIW", "MF", "$SHS");
-
- flukaGeom->Cone(kR21, kR21, -1., -1.,
- kZvac4, kZch21, posfluka,"NIW", "MF", "$SHS");
- flukaGeom->Cone(kR21, kR21, -1., -1.,
- kZch21, kZch22, posfluka,"AIR", "MF", "$SHS");
- flukaGeom->Cone(kR21, kR21, -1., -1.,
- kZch22, kZvac6, posfluka,"NIW", "MF", "$SHS");
-
-*/
- if (fWriteGeometry) flukaGeom->Finish();
+ dz = (kZFilterIn + kZFilterOut) / 2.;
+ gMC->Gspos("YMuonFilterM", 1, "YOUT2", 0., 0., - dz, 0, "ONLY");
-//
-// end Fluka
//
// Outer Pb Cone
-
+//
if (fPbCone) {
dl = (kZvac10-kZch32)/2.;
dz = dl+kZch32;
par0[ 9] = -dz + kZch41;
par0[10] = 30.;
- par0[11] = 37.5;
+ par0[11] = 36.9;
// recess erice2000
par0[12] = -dz + kZch42;
par0[13] = 30.;
par0[21] = -dz + kZch51;
par0[22] = 30.;
- par0[23] = 37.5; // recess erice2000
+ par0[23] = 36.9; // recess erice2000
par0[24] = -dz + kZch52;
par0[25] = 30.;
par0[27] = -dz + kZch52;
par0[28] = 30.;
- par0[29] = 30.+(kZch52-kZConeE)*TMath::Tan(kThetaOpenPbO);
+ par0[29] = 30.+(kZch52+4.-kZConeE)*TMath::Tan(kThetaOpenPbO);
// end of cone
par0[30] = +dl;
par0[31] = 30.;
par0[32] = par0[29];
//
- gMC->Gsvolu("YOPB", "PCON", idtmed[kPb], par0, 33);
- Float_t dzs = -(kZvac12-zstart)/2. + (kZch32-zstart) + dl;
+ gMC->Gsvolu("YOPB", "PCON", idtmed[kPb+40], par0, 33);
+ Float_t dzs = -kzLength + (kZch32-zstart) + dl;
gMC->Gspos("YOPB", 1, "YMOT", 0., 0., dzs, 0, "ONLY");
//
par0[13] = 33.5;
par0[15] = -dz + kZch41;
- par0[17] = 37.5;
- par0[16] = 33.5;
+ par0[17] = 36.9;
+ par0[16] = 32.9;
// 5th station
par0[18] = -dz + kZch51;
- par0[20] = 37.5;
- par0[19] = 33.5;
+ par0[20] = 36.9;
+ par0[19] = 32.9;
par0[21] = -dz + kZch52;
- par0[23] = 37.5;
- par0[22] = 33.5;
+ par0[23] = 36.9;
+ par0[22] = 32.9;
par0[24] = -dz + kZch52;
par0[26] = 30.+(kZch52-kZConeE)*TMath::Tan(kThetaOpenPbO);
gMC->Gsvolu("YOSE", "PCON", idtmed[kSteel], par0, 36);
gMC->Gspos ("YOSE", 1, "YOPB", 0., 0., 0., 0, "ONLY");
//
-// Concrete replacing lead
-//
- zCC1 = 1066.;
- zCC2 = 1188.;
- dlCC=(zCC2-zCC1)/2.;
- parCC[ 3] = -dlCC;
- parCC[ 4] = 30.;
- parCC[ 5] = 30.+(zCC1-kZConeE)*TMath::Tan(kThetaOpenPbO)-4.;
-
- parCC[ 6] = dlCC;
- parCC[ 7] = 30.;
- parCC[ 8] = 30.+(zCC2-kZConeE)*TMath::Tan(kThetaOpenPbO)-4.;
- gMC->Gsvolu("YOC1", "PCON", idtmed[kSteel], parCC, 9);
-// gMC->Gspos("YOC1", 1, "YOPB", 0., 0., dl-dlCC-(kZvac10-zCC2), 0, "ONLY");
-
- zCC1 = 1316.;
- zCC2 = 1349.;
- dlCC=(zCC2-zCC1)/2.;
- parCC[ 3] = -dlCC;
- parCC[ 4] = 30.;
- parCC[ 5] = 30.+(zCC1-kZConeE)*TMath::Tan(kThetaOpenPbO)-4.;
+// Extra Tungsten shield close to stations 1 and 2
+//
+ TGeoRotation* rot000 = new TGeoRotation("rot000", 90., 0., 90., 90., 0., 0.);
+ TGeoRotation* rot090 = new TGeoRotation("rot090", 90., 90., 90., 180., 0., 0.);
+ TGeoRotation* rot180 = new TGeoRotation("rot180", 90., 180., 90., 270., 0., 0.);
+ TGeoRotation* rot270 = new TGeoRotation("rot270", 90., 270., 90., 0., 0., 0.);
+ TGeoVolume* mother = gGeoManager->GetVolume("YMOT");
+ TGeoVolumeAssembly* assembly = new TGeoVolumeAssembly("YASS");
+ assembly->AddNode(mother, 1, new TGeoTranslation(0., 0., 0.));
+ TGeoVolumeAssembly* extraShield1 = new TGeoVolumeAssembly("YCRE");
+ TGeoVolumeAssembly* extraShield2 = new TGeoVolumeAssembly("YCRF");
+
+///////////////////////////////////
+// //
+// Recess Station 1 //
+// //
+///////////////////////////////////
+
+
+///////////////////////////////////
+// FA W-Ring 2 //
+// Drawing ALIP2A__0220 //
+///////////////////////////////////
+ Float_t faWring2Rinner = 15.40;
+ Float_t faWring2Router = 18.40;
+ Float_t faWring2HWidth = 3.75;
+ Float_t faWring2Cutoffx = 3.35;
+ Float_t faWring2Cutoffy = 3.35;
+ TGeoTubeSeg* shFaWring2a = new TGeoTubeSeg(faWring2Rinner, faWring2Router, faWring2HWidth, 0., 90.);
+ shFaWring2a->SetName("shFaWring2a");
+ TGeoBBox* shFaWring2b = new TGeoBBox(faWring2Router / 2., faWring2Router / 2., faWring2HWidth);
+ shFaWring2b->SetName("shFaWring2b");
+ TGeoTranslation* trFaWring2b
+ = new TGeoTranslation("trFaWring2b", faWring2Router / 2. + faWring2Cutoffx, faWring2Router / 2. + faWring2Cutoffy, 0.);
+ trFaWring2b->RegisterYourself();
+ TGeoCompositeShape* shFaWring2 = new TGeoCompositeShape("shFaWring2", "(shFaWring2a)*(shFaWring2b:trFaWring2b)");
+ TGeoVolume* voFaWring2 = new TGeoVolume("FA_WRING2", shFaWring2, gGeoManager->GetMedium("SHIL_Ni/W3"));
+
+///////////////////////////////////
+// FA W-Ring 3 //
+// Drawing ALIP2A__0219 //
+///////////////////////////////////
+ Float_t faWring3Rinner = 15.40;
+ Float_t faWring3Router = 18.40;
+ Float_t faWring3HWidth = 3.75;
+ Float_t faWring3Cutoffx = 3.35;
+ Float_t faWring3Cutoffy = 3.35;
+ TGeoTubeSeg* shFaWring3a = new TGeoTubeSeg(faWring3Rinner, faWring3Router, faWring3HWidth, 0., 90.);
+ shFaWring3a->SetName("shFaWring3a");
+ TGeoBBox* shFaWring3b = new TGeoBBox(faWring3Router / 2., faWring3Router / 2., faWring3HWidth);
+ shFaWring3b->SetName("shFaWring3b");
+ TGeoTranslation* trFaWring3b
+ = new TGeoTranslation("trFaWring3b", faWring3Router / 2. + faWring3Cutoffx, faWring3Router / 2. + faWring3Cutoffy, 0.);
+ trFaWring3b->RegisterYourself();
+ TGeoCompositeShape* shFaWring3 = new TGeoCompositeShape("shFaWring3", "(shFaWring3a)*(shFaWring3b:trFaWring3b)");
+ TGeoVolume* voFaWring3 = new TGeoVolume("FA_WRING3", shFaWring3, gGeoManager->GetMedium("SHIL_Ni/W3"));
+
+///////////////////////////////////
+// FA W-Ring 5 //
+// Drawing ALIP2A__0221 //
+///////////////////////////////////
+ Float_t faWring5Rinner = 15.40;
+ Float_t faWring5Router = 18.67;
+ Float_t faWring5HWidth = 1.08;
+ TGeoVolume* voFaWring5 = new TGeoVolume("FA_WRING5",
+ new TGeoTube(faWring5Rinner, faWring5Router, faWring5HWidth),
+ gGeoManager->GetMedium("SHIL_Ni/W3"));
+
+//
+// Position the rings in the assembly
+//
+// Distance between rings
+ Float_t faDWrings = 1.92;
+//
+ dz = - (4. * faWring2HWidth + 4. * faWring3HWidth + 2. * faWring5HWidth + 2. * faDWrings) / 2.;
+ dz += faWring2HWidth;
+ extraShield1->AddNode(voFaWring2, 1, new TGeoCombiTrans(0., 0., dz, rot090));
+ extraShield1->AddNode(voFaWring2, 2, new TGeoCombiTrans(0., 0., dz, rot270));
+ dz += faWring2HWidth; dz += faDWrings;
+ dz += faWring3HWidth;
+ extraShield1->AddNode(voFaWring3, 1, new TGeoCombiTrans(0., 0., dz, rot000));
+ extraShield1->AddNode(voFaWring3, 2, new TGeoCombiTrans(0., 0., dz, rot180));
+ dz += faWring3HWidth;
+ dz += faWring5HWidth;
+ extraShield1->AddNode(voFaWring5, 1, new TGeoTranslation(0., 0., dz));
+ dz += faWring5HWidth;
+ dz += faWring3HWidth;
+ extraShield1->AddNode(voFaWring3, 3, new TGeoCombiTrans(0., 0., dz, rot090));
+ extraShield1->AddNode(voFaWring3, 4, new TGeoCombiTrans(0., 0., dz, rot270));
+ dz += faWring3HWidth;
+ dz += faDWrings;
+ dz += faWring2HWidth;
+ extraShield1->AddNode(voFaWring2, 3, new TGeoCombiTrans(0., 0., dz, rot000));
+ extraShield1->AddNode(voFaWring2, 4, new TGeoCombiTrans(0., 0., dz, rot180));
+ dz += faWring2HWidth;
+
+ // assembly->AddNode(extraShield1, 1, new TGeoTranslation(0., 0., -kzLength + 49.7 + dz));
+ Float_t dzKeep = dz;
+
+
+///////////////////////////////////
+// //
+// Recess Station 2 //
+// //
+///////////////////////////////////
+
+///////////////////////////////////
+// SAA1 W-Ring 1 //
+// Drawing ALIP2A__0217 //
+///////////////////////////////////
+ Float_t saa1Wring1Width = 5.85;
+ TGeoPcon* shSaa1Wring1 = new TGeoPcon(0., 360., 2);
+ shSaa1Wring1->DefineSection(0, 0.00 , 20.30, 23.175);
+ shSaa1Wring1->DefineSection(1, saa1Wring1Width, 20.30, 23.400);
+ TGeoVolume* voSaa1Wring1 = new TGeoVolume("SAA1_WRING1", shSaa1Wring1, gGeoManager->GetMedium("SHIL_Ni/W3"));
+
+///////////////////////////////////
+// SAA1 W-Ring 2 //
+// Drawing ALIP2A__0055 //
+///////////////////////////////////
+ Float_t saa1Wring2Rinner = 20.30;
+ Float_t saa1Wring2Router = 23.40;
+ Float_t saa1Wring2HWidth = 3.75;
+ Float_t saa1Wring2Cutoffx = 4.45;
+ Float_t saa1Wring2Cutoffy = 4.45;
+ TGeoTubeSeg* shSaa1Wring2a = new TGeoTubeSeg(saa1Wring2Rinner, saa1Wring2Router, saa1Wring2HWidth, 0., 90.);
+ shSaa1Wring2a->SetName("shSaa1Wring2a");
+ TGeoBBox* shSaa1Wring2b = new TGeoBBox(saa1Wring2Router / 2., saa1Wring2Router / 2., saa1Wring2HWidth);
+ shSaa1Wring2b->SetName("shSaa1Wring2b");
+ TGeoTranslation* trSaa1Wring2b
+ = new TGeoTranslation("trSaa1Wring2b", saa1Wring2Router / 2. + saa1Wring2Cutoffx, saa1Wring2Router / 2. + saa1Wring2Cutoffy, 0.);
+ trSaa1Wring2b->RegisterYourself();
+ TGeoCompositeShape* shSaa1Wring2 = new TGeoCompositeShape("shSaa1Wring2", "(shSaa1Wring2a)*(shSaa1Wring2b:trSaa1Wring2b)");
+ TGeoVolume* voSaa1Wring2 = new TGeoVolume("SAA1_WRING2", shSaa1Wring2, gGeoManager->GetMedium("SHIL_Ni/W3"));
+
+///////////////////////////////////
+// SAA1 W-Ring 3 //
+// Drawing ALIP2A__0216 //
+///////////////////////////////////
+
+ Float_t saa1Wring3Rinner = 20.30;
+ Float_t saa1Wring3Router = 23.40;
+ Float_t saa1Wring3HWidth = 3.75;
+ Float_t saa1Wring3Cutoffx = 4.50;
+ Float_t saa1Wring3Cutoffy = 4.40;
+ TGeoTubeSeg* shSaa1Wring3a = new TGeoTubeSeg(saa1Wring3Rinner, saa1Wring3Router, saa1Wring3HWidth, 0., 90.);
+ shSaa1Wring3a->SetName("shSaa1Wring3a");
+ TGeoBBox* shSaa1Wring3b = new TGeoBBox(saa1Wring3Router / 2., saa1Wring3Router / 2., saa1Wring3HWidth);
+ shSaa1Wring3b->SetName("shSaa1Wring3b");
+ TGeoTranslation* trSaa1Wring3b
+ = new TGeoTranslation("trSaa1Wring3b", saa1Wring3Router / 2. + saa1Wring3Cutoffx, saa1Wring3Router / 2. + saa1Wring3Cutoffy, 0.);
+ trSaa1Wring3b->RegisterYourself();
+ TGeoCompositeShape* shSaa1Wring3 = new TGeoCompositeShape("shSaa1Wring3", "(shSaa1Wring3a)*(shSaa1Wring3b:trSaa1Wring3b)");
+ TGeoVolume* voSaa1Wring3 = new TGeoVolume("SAA1_WRING3", shSaa1Wring3, gGeoManager->GetMedium("SHIL_Ni/W3"));
+
+///////////////////////////////////
+// SAA1 W-Ring 4 //
+// Drawing ALIP2A__0215 //
+///////////////////////////////////
+ Float_t saa1Wring4Width = 5.85;
+ TGeoPcon* shSaa1Wring4 = new TGeoPcon(0., 360., 5);
+ shSaa1Wring4->DefineSection(0, 0.00, 20.30, 23.40);
+ shSaa1Wring4->DefineSection(1, 1.00, 20.30, 23.40);
+ shSaa1Wring4->DefineSection(2, 1.00, 20.30, 24.50);
+ shSaa1Wring4->DefineSection(3, 4.85, 20.30, 24.80);
+ shSaa1Wring4->DefineSection(4, 5.85, 24.10, 24.80);
+ TGeoVolume* voSaa1Wring4 = new TGeoVolume("SAA1_WRING4", shSaa1Wring4, gGeoManager->GetMedium("SHIL_Ni/W3"));
+
+///////////////////////////////////
+// SAA1 W-Ring 5 //
+// Drawing ALIP2A__0218 //
+///////////////////////////////////
+ Float_t saa1Wring5Rinner = 20.30;
+ Float_t saa1Wring5Router = 23.40;
+ Float_t saa1Wring5HWidth = 0.85;
+ TGeoVolume* voSaa1Wring5 = new TGeoVolume("SAA1_WRING5",
+ new TGeoTube(saa1Wring5Rinner, saa1Wring5Router, saa1Wring5HWidth),
+ gGeoManager->GetMedium("SHIL_Ni/W3"));
+//
+// Position the rings in the assembly
+//
+// Distance between rings
+ Float_t saa1DWrings = 2.6;
+//
+ dz = - (saa1Wring1Width + 6. * saa1Wring2HWidth + 2. * saa1Wring3HWidth + saa1Wring4Width + 2. * saa1Wring5HWidth + 2. * saa1DWrings) / 2.;
+ extraShield2->AddNode(voSaa1Wring1, 1, new TGeoTranslation(0., 0., dz));
+ dz += saa1Wring1Width;
+ dz += saa1Wring2HWidth;
+ extraShield2->AddNode(voSaa1Wring2, 1, new TGeoCombiTrans(0., 0., dz, rot000));
+ extraShield2->AddNode(voSaa1Wring2, 2, new TGeoCombiTrans(0., 0., dz, rot180));
+ dz += saa1Wring2HWidth;
+ dz += saa1DWrings;
+ dz += saa1Wring2HWidth;
+ extraShield2->AddNode(voSaa1Wring2, 3, new TGeoCombiTrans(0., 0., dz, rot090));
+ extraShield2->AddNode(voSaa1Wring2, 4, new TGeoCombiTrans(0., 0., dz, rot270));
+ dz += saa1Wring2HWidth;
+ dz += saa1Wring5HWidth;
+ extraShield2->AddNode(voSaa1Wring5, 1, new TGeoTranslation(0., 0., dz));
+ dz += saa1Wring5HWidth;
+ dz += saa1Wring2HWidth;
+ extraShield2->AddNode(voSaa1Wring2, 5, new TGeoCombiTrans(0., 0., dz, rot000));
+ extraShield2->AddNode(voSaa1Wring2, 6, new TGeoCombiTrans(0., 0., dz, rot180));
+ dz += saa1Wring2HWidth;
+ dz += saa1DWrings;
+ dz += saa1Wring3HWidth;
+ extraShield2->AddNode(voSaa1Wring3, 1, new TGeoCombiTrans(0., 0., dz, rot090));
+ extraShield2->AddNode(voSaa1Wring3, 2, new TGeoCombiTrans(0., 0., dz, rot270));
+ dz += saa1Wring3HWidth;
+ extraShield2->AddNode(voSaa1Wring4, 1, new TGeoTranslation(0., 0., dz));
+ dz += saa1Wring4Width;
+ //assembly->AddNode(extraShield2, 1, new TGeoTranslation(0., 0., -kzLength + (kZch21 - zstart) + dz));
- parCC[ 6] = dlCC;
- parCC[ 7] = 30.;
- parCC[ 8] = 30.+(zCC2-kZConeE)*TMath::Tan(kThetaOpenPbO)-4.;
- gMC->Gsvolu("YOC2", "PCON", idtmed[kSteel], parCC, 9);
-// gMC->Gspos("YOC2", 1, "YOPB", 0., 0., dl-dlCC-(kZvac10-zCC2), 0, "ONLY");
+ TGeoRotation* rotxz = new TGeoRotation("rotxz", 90., 0., 90., 90., 180., 0.);
+ TGeoVolume* yout1 = gGeoManager->GetVolume("YOUT1");
+ cout << zstart << "..." << dz << endl;
+ yout1->AddNode(extraShield1, 1, new TGeoCombiTrans(0., 0., -zstart - ( 49.7 + dzKeep), rotxz));
+ yout1->AddNode(extraShield2, 1, new TGeoCombiTrans(0., 0., -zstart - (kZch21 - zstart + dz ), rotxz));
+
+ TGeoVolume* top = gGeoManager->GetVolume("ALIC");
+ top->AddNode(assembly, 1, new TGeoCombiTrans(0., 0., -zstart - kzLength, rotxz));
}
}
//
Int_t i;
//
- if(fDebug) {
+ if(AliLog::GetGlobalDebugLevel()>0) {
printf("\n%s: ",ClassName());
for(i=0;i<35;i++) printf("*");
printf(" SHILv2_INIT ");
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff