/*
T0 DA for online calibration
-Contact: Michal.Oledzki@cern.ch
-Link: http://users.jyu.fi/~mioledzk/
-Run Type: STANDALONE
+Contact: Alla.Maevskaya@cern.ch
+Run Type: AMPLITUDE_CALIBRATION
DA Type: MON
-Number of events needed: 400000
+Number of events needed: 5000
Input Files: inLaser.dat, external parameters
Output Files: daLaser.root, to be exported to the DAQ FXS
Trigger types used: CALIBRATION_EVENT
#include "TF1.h"
#include "TSpectrum.h"
#include "TVirtualFitter.h"
-//#include "TProfile.h"
-int cqbx,cqby,clbx,clby,mod;
-float cqlx,cqmx,cqly,cqmy,cllx,clmx,clly,clmy;
+//AMORE
+//
+#ifdef ALI_AMORE
+#include <AmoreDA.h>
+#endif
+
+
+float lcfd, hcfd;
/* Main routine
Arguments:
1- monitoring data source
"RIO",
"TStreamerInfo()");
- if(daqDA_DB_getFile(FILE_IN, FILE_IN)){
- printf("Couldn't get input file >>inLaser.dat<< from DAQ_DB !!!\n");
- return -1;
- }
+ Int_t nEntries = daqDA_ECS_getTotalIteration(); // usually = 11 = Nb of calibration runs
+ cout<<" nEntries "<<nEntries<<endl;
+ Int_t nInit=1; // = 0 all DAC values ; = 1 DAC=0 excluded (default=1)
+ // Reading current iteration
+ Int_t nIndex = daqDA_ECS_getCurrentIteration();
+ if(nIndex<0 || nIndex>nEntries) {printf("\n Failed: nIndex = %d\n",nIndex); return -1 ;}
-
- FILE *inp;
- char c;
- inp = fopen(FILE_IN, "r");
- if(!inp){
- printf("Input file >>inLaser.dat<< not found !!!\n");
- return -1;
+
+// decode the input line
+ if (argc!=2) {
+ printf("Wrong number of arguments\n");
+ return -1;
}
+
- while((c=getc(inp))!=EOF) {
- switch(c) {
- case 'a': {fscanf(inp, "%d", &cqbx ); break;} //N of X bins hCFD_QTC
- case 'b': {fscanf(inp, "%f", &cqlx ); break;} //Low x hCFD_QTC
- case 'c': {fscanf(inp, "%f", &cqmx ); break;} //High x hCFD_QTC
- case 'd': {fscanf(inp, "%d", &cqby ); break;} //N of Y bins hCFD_QTC
- case 'e': {fscanf(inp, "%f", &cqly ); break;} //Low y hCFD_QTC
- case 'f': {fscanf(inp, "%f", &cqmy ); break;} //High y hCFD_QTC
- case 'g': {fscanf(inp, "%d", &clbx ); break;} //N of X bins hCFD_LED
- case 'h': {fscanf(inp, "%f", &cllx ); break;} //Low x hCFD_LED
- case 'i': {fscanf(inp, "%f", &clmx ); break;} //High x hCFD_LED
- case 'j': {fscanf(inp, "%d", &clby ); break;} //N of Y bins hCFD_LED
- case 'k': {fscanf(inp, "%f", &clly ); break;} //Low y hCFD_LED
- case 'l': {fscanf(inp, "%f", &clmy ); break;} //High y hCFD_LED
- case 'm': {fscanf(inp, "%d", &mod ); break;} //Modulo number
- }
+ Float_t mipsin[20];
+ if(daqDA_DB_getFile(FILE_IN, FILE_IN)){
+ printf("Couldn't get input file >>inLaser.dat<< from DAQ_DB !!!\n");
+ return -1;
}
- fclose(inp);
+ ifstream filein(FILE_IN,ios::in);
+ Int_t k=0;
+ while (k<nEntries ) {
+ filein >>mipsin[k] ;
+ cout<<" "<<mipsin[k]<<endl;
+ k++; }
+ filein>>lcfd;
+ filein>>hcfd;
+ filein.close();
+
+
+
+ /*
if (argc!=2) {
printf("Wrong number of arguments\n");
return -1;
}
+ */
+
+ // Char_t inputFile[256]="";
/* define data source : this is argument 1 */
/* log start of process */
printf("T0 monitoring program started\n");
-
+
// Allocation of histograms - start
- TH2F *hCFDvsQTC[24][10];
- TH2F *hCFDvsLED[24][10];
-
- for(Int_t ic=0; ic<24; ic++)
- for(Int_t im=0;im<10;im++)
+
+ TH1F *hQTC[24]; TH1F *hLED[24]; TH1F *hCFD[24];
+ printf(" CFD low limit %f high %f",lcfd, hcfd);
+
+ for(Int_t ic=0; ic<24; ic++)
{
- hCFDvsQTC[ic][im] = new TH2F(Form("CFDvsQTC%d_%d",ic+1,im+1),"CFDvsQTC",cqbx,cqlx,cqmx,cqby,cqly,cqmy);
- hCFDvsLED[ic][im] = new TH2F(Form("CFDvsLED%d_%d",ic+1,im+1),"CFDvsLED",clbx,cllx,clmx,clby,clly,clmy);
+ hQTC[ic] = new TH1F(Form("hQTC%d_%d",ic+1,nIndex),"QTC",1000, 500, 10000);
+ hLED[ic] = new TH1F(Form("hLED%d_%d",ic+1,nIndex),"LED",125,200,700);
+ hCFD[ic] = new TH1F(Form("hCFD%d_%d",ic+1,nIndex),"CFD", Int_t ((hcfd-lcfd)/2), lcfd, hcfd);
}
-
+
// Allocation of histograms - end
-
+
+ // Reading current iteration
+
Int_t iev=0;
- Int_t mip=0;
+
/* main loop (infinite) */
for(;;) {
struct eventHeaderStruct *event;
eventTypeType eventT;
-
+
/* check shutdown condition */
if (daqDA_checkShutdown()) {break;}
printf("monitorGetEventDynamic() failed : %s\n",monitorDecodeError(status));
break;
}
-
+
/* retry if got no event */
if (event==NULL) {
continue;
}
-
+
/* use event - here, just write event id to result file */
eventT=event->eventType;
-
+
switch (event->eventType){
-
- case START_OF_RUN:
- break;
-
- case END_OF_RUN:
- break;
-
- case CALIBRATION_EVENT:
-// case PHYSICS_EVENT:
+
+ case START_OF_RUN:
+ break;
+
+ case END_OF_RUN:
+ break;
+
+ case CALIBRATION_EVENT:
+ // case PHYSICS_EVENT:
iev++;
-
- if(iev==1){
- printf("First event - %i\n",iev);
- }
-
+
+ if(iev==1) printf("First event %i\n",iev);
+
+
// Initalize raw-data reading and decoding
AliRawReader *reader = new AliRawReaderDate((void*)event);
-
+
// Enable the following two lines in case of real-data
- reader->RequireHeader(kTRUE);
+ reader->RequireHeader(kTRUE);
AliT0RawReader *start = new AliT0RawReader(reader, kTRUE);
// Read raw data
for(Int_t i0=0;i0<106;i0++)
for(Int_t j0=0;j0<5;j0++)
allData[i0][j0] = 0;
-
- if(start->Next()){
+
+ if(start->Next()){
for (Int_t i=0; i<106; i++) {
- for(Int_t iHit=0;iHit<5;iHit++){
- allData[i][iHit]= start->GetData(i,iHit);
- }
+ for(Int_t iHit=0;iHit<5;iHit++){
+ allData[i][iHit]= start->GetData(i,iHit);
+ }
}
- }
- else
- printf("No data for T0 found!!!\n");
-
+ }
+ else
+ printf("No data for T0 found!!!\n");
+
+
// Fill the histograms
-
- if(iev<10000){
- mip=0;
- }else
- if((iev%mod)==0.0){
- mip++;
-// printf("mip = %d\n",mip);
- if(mip>=9) mip=9;}
-
for (Int_t ik = 0; ik<24; ik+=2)
- for (Int_t iHt=0; iHt<5; iHt++){
- Int_t cc = ik/2;
- if(allData[ik+25][iHt]!=0 && allData[ik+26][iHt]!=0 && allData[cc+1][iHt]!=0){
- hCFDvsQTC[cc][mip]->Fill((allData[ik+25][iHt]-allData[ik+26][iHt]) , (allData[cc+1][iHt]-allData[0][0]+5000));
- }
- if(allData[cc+13][iHt]!=0 && allData[cc+1][iHt]!=0){
- hCFDvsLED[cc][mip]->Fill(allData[cc+13][iHt]-allData[cc+1][iHt],allData[cc+1][iHt]-allData[0][0]+5000);
- }
- }
-
+ {
+ Int_t cc = ik/2;
+ if(allData[ik+25][0]>0 && allData[ik+26][0]>0)
+ hQTC[cc]->Fill((allData[ik+25][0]-allData[ik+26][0]));
+ if(allData[cc+13][0]>0 && allData[cc+1][0]>0)
+ hLED[cc]->Fill(allData[cc+13][0]-allData[cc+1][0]);
+ if(allData[cc+1][0] > 0) hCFD[cc]->Fill(allData[cc+1][0]);
+ // printf("%i %i CFD %i LED_CFD %i\n",
+ // ik,cc,allData[cc+1][0],allData[cc+1][0]);
+
+ }
+
+
for (Int_t ik = 24; ik<48; ik+=2)
- for (Int_t iHt=0; iHt<5; iHt++){
- Int_t cc = ik/2;
- if(allData[ik+57][iHt]!=0 && allData[ik+58][iHt]!=0 && allData[cc+45][iHt]!=0){
- hCFDvsQTC[cc][mip]->Fill(allData[ik+57][iHt]-allData[ik+58][iHt],allData[cc+45][iHt]-allData[0][0]+5000);
- }
- if(allData[cc+57][iHt]!=0 && allData[cc+45][iHt]!=0){
- hCFDvsLED[cc][mip]->Fill(allData[cc+57][iHt]-allData[cc+45][iHt],allData[cc+45][iHt]-allData[0][0]+5000);
- }
+ {
+ Int_t cc = ik/2;
+ if(allData[ik+57][0]>0 && allData[ik+58][0]>0 && allData[cc+45][0]>0)
+ hQTC[cc]->Fill(allData[ik+57][0]-allData[ik+58][0]);
+
+ if(allData[cc+57][0]>0 && allData[cc+45][0]>0)
+ hLED[cc]->Fill(allData[cc+57][0]-allData[cc+45][0]);
+ if(allData[cc+45][0] > 0) hCFD[cc]->Fill(allData[cc+45][0]);
+ // printf("%i %i CFD %i LED_CFD %i\n",
+ // ik,cc,allData[cc+45][0],allData[cc+45][0]);
+
}
- delete start;
- start = 0x0;
- reader->Reset();
+ delete start;
+ start = 0x0;
+ delete reader;
+ reader= 0x0;
// End of fill histograms
}
-
+
/* free resources */
free(event);
break;
}
}
+
printf("After loop, before writing histos\n");
+ TH1F* hAmp = new TH1F("hAmpLaser"," Laser amplitude ", 1000, 0.5, 20.5);
+ for(Int_t i=0; i<nIndex; i++) hAmp->Fill(mipsin[i]);
// write a file with the histograms
- TFile *hist = new TFile(FILE_OUT,"RECREATE");
-
+ TFile *hist=0;
+ if(nIndex == 1 )
+ hist = new TFile(FILE_OUT,"RECREATE");
+ else
+ hist = new TFile(FILE_OUT,"UPDATE");
+ hist->cd();
+
for(Int_t j=0;j<24;j++)
- for(Int_t k=0;k<10;k++)
{
- hCFDvsQTC[j][k]->Write();
- hCFDvsLED[j][k]->Write();
+ if(hQTC[j]->GetEntries()>0) hQTC[j]->Write();
+ if(hLED[j]->GetEntries()>0) hLED[j]->Write();
+ if(hCFD[j]->GetEntries()>0) hCFD[j]->Write();
}
+ hAmp->Write();
+
hist->Close();
delete hist;
-
+
status=0;
-
+
/* export file to FXS */
- if (daqDA_FES_storeFile(FILE_OUT, "LASER")) {
+ if (daqDA_FES_storeFile(FILE_OUT, "AMPLITUDE_CALIBRATION")) {
status=-2;
}
-
+
return status;
}
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff