-static Int_t eventsPerRun = 100;
-enum PprRun_t
-{
- test50,
- kParam_8000, kParam_4000, kParam_2000,
- kHijing_cent1, kHijing_cent2,
- kHijing_per1, kHijing_per2, kHijing_per3, kHijing_per4, kHijing_per5,
- kHijing_jj25, kHijing_jj50, kHijing_jj75, kHijing_jj100, kHijing_jj200,
- kHijing_gj25, kHijing_gj50, kHijing_gj75, kHijing_gj100, kHijing_gj200,
- kHijing_pA, kPythia6, kPythia6Jets, kD0PbPb5500, kD_TRD, kB_TRD, kJpsi_TRD,
- kU_TRD, kPyJJ, kPyGJ
-};
-
-enum PprGeo_t
-{
- kHoles, kNoHoles
-};
-
-enum PprRad_t
-{
- kGluonRadiation, kNoGluonRadiation
-};
-
-enum PprMag_t
-{
- k2kG, k4kG, k5kG
-};
-
-
-// This part for configuration
-//static PprRun_t srun = test50;
-static PprRun_t srun = kPythia6;
-static PprGeo_t sgeo = kHoles;
-static PprRad_t srad = kGluonRadiation;
-static PprMag_t smag = k5kG;
-
-// Comment line
-static TString comment;
-
-// Functions
+// One can use the configuration macro in compiled mode by
+// root [0] gSystem->Load("libgeant321");
+// root [0] gSystem->SetIncludePath("-I$ROOTSYS/include -I$ALICE_ROOT/include\
+// -I$ALICE_ROOT -I$ALICE/geant3/TGeant3");
+// root [0] .x grun.C(1,"Config.C++")
+
+#if !defined(__CINT__) || defined(__MAKECINT__)
+#include <Riostream.h>
+#include <TPDGCode.h>
+#include <TRandom.h>
+#include <TSystem.h>
+#include <TVirtualMC.h>
+#include <TGeant3TGeo.h>
+#include "STEER/AliRunLoader.h"
+#include "STEER/AliRun.h"
+#include "STEER/AliConfig.h"
+#include "PYTHIA6/AliDecayerPythia.h"
+#include "EVGEN/AliGenCocktail.h"
+#include "EVGEN/AliGenHIJINGpara.h"
+#include "STEER/AliMagF.h"
+#include "STRUCT/AliBODY.h"
+#include "STRUCT/AliMAG.h"
+#include "STRUCT/AliABSOv3.h"
+#include "STRUCT/AliDIPOv3.h"
+#include "STRUCT/AliHALLv3.h"
+#include "STRUCT/AliFRAMEv2.h"
+#include "STRUCT/AliSHILv3.h"
+#include "STRUCT/AliPIPEv3.h"
+#include "ITS/AliITSv11Hybrid.h"
+#include "TPC/AliTPCv2.h"
+#include "TOF/AliTOFv6T0.h"
+#include "HMPID/AliHMPIDv3.h"
+#include "ZDC/AliZDCv3.h"
+#include "TRD/AliTRDv1.h"
+#include "FMD/AliFMDv1.h"
+#include "MUON/AliMUONv1.h"
+#include "PHOS/AliPHOSv1.h"
+#include "PMD/AliPMDv1.h"
+#include "T0/AliT0v1.h"
+#include "EMCAL/AliEMCALv2.h"
+#include "ACORDE/AliACORDEv1.h"
+#include "VZERO/AliVZEROv7.h"
+#endif
+
Float_t EtaToTheta(Float_t arg);
-//AliGenerator* GeneratorFactory(PprRun_t srun);
-//AliGenHijing* HijingStandard();
+void LoadPythia();
+
void Config()
{
- cout << "==> Config.C..." << endl;
-
- // Set Random Number seed
- gRandom->SetSeed(12345);
- cout<<"Seed for random number generation= "<<gRandom->GetSeed()<<endl;
+ // ThetaRange is (0., 180.). It was (0.28,179.72) 7/12/00 09:00
+ // Theta range given through pseudorapidity limits 22/6/2001
+ // Set Random Number seed
+ //gRandom->SetSeed(123456); // Set 0 to use the current time
-
- // libraries required by fluka21
+ AliLog::Message(AliLog::kInfo, Form("Seed for random number generation = %d",gRandom->GetSeed()), "Config.C", "Config.C", "Config()","Config.C", __LINE__);
- gSystem->Load("libGeom");
- cout << "\t* Loading TFluka..." << endl;
- gSystem->Load("libTFluka");
-
- cout << "\t* Instantiating TFluka..." << endl;
- new TFluka("C++ Interface to Fluka", 0/*verbositylevel*/);
-
- AliRunLoader* rl=0x0;
-
- cout<<"Config.C: Creating Run Loader ..."<<endl;
- rl = AliRunLoader::Open("galice.root",
+ // Load Pythia libraries
+ LoadPythia();
+ // Libraries required by geant321
+ Bool_t isFluka = kTRUE;
+ if (isFluka) {
+ gSystem->Load("libGeom");
+ cout << "\t* Loading TFluka..." << endl;
+ gSystem->Load("libfluka");
+
+ cout << "\t* Instantiating TFluka..." << endl;
+ new TFluka("C++ Interface to Fluka", 0/*verbositylevel*/);
+ }
+ else {
+ cout << "\t* Loading Geant3..." << endl;
+ gSystem->Load("libgeant321");
+
+ cout << "\t* Instantiating Geant3TGeo..." << endl;
+ new TGeant3TGeo("C++ Interface to Geant3");
+ }
+ AliRunLoader* rl=0x0;
+
+ AliLog::Message(AliLog::kInfo, "Creating Run Loader", "Config.C", "Config.C", "Config()"," Config.C", __LINE__);
+
+ rl = AliRunLoader::Open("galice.root",
AliConfig::GetDefaultEventFolderName(),
"recreate");
- if (rl == 0x0)
- {
- gAlice->Fatal("Config.C","Can not instatiate the Run Loader");
- return;
- }
- rl->SetCompressionLevel(2);
- rl->SetNumberOfEventsPerFile(3);
- gAlice->SetRunLoader(rl);
-
- //
- // Set External decayer
- AliDecayer *decayer = new AliDecayerPythia();
-
- decayer->SetForceDecay(kAll);
- decayer->Init();
- gMC->SetExternalDecayer(decayer);
-
- TFluka *fluka = (TFluka *) gMC;
- fluka->SetCoreInputFileName("corealice.inp");
- fluka->SetInputFileName("alice.inp");
- fluka->SetGeneratePemf(kFALSE);
- //
- //
- //
- // Physics process control
-
- gMC->SetProcess("DCAY",1);
- gMC->SetProcess("PAIR",1);
- gMC->SetProcess("COMP",1);
- gMC->SetProcess("PHOT",1);
- gMC->SetProcess("PFIS",0);
- gMC->SetProcess("DRAY",1);
- gMC->SetProcess("ANNI",1);
- gMC->SetProcess("BREM",1);
- gMC->SetProcess("MUNU",1);
- gMC->SetProcess("CKOV",1); // 1
- gMC->SetProcess("HADR",1);
- gMC->SetProcess("LOSS",2);
- gMC->SetProcess("MULS",1);
- gMC->SetProcess("RAYL",1);
-
- Float_t cut = 1.e-3; // 1MeV cut by default
- Float_t tofmax = 1.e10;
-
- gMC->SetCut("CUTGAM", cut);
- gMC->SetCut("CUTELE", cut);
- gMC->SetCut("CUTNEU", cut);
- gMC->SetCut("CUTHAD", cut);
- gMC->SetCut("CUTMUO", cut);
- gMC->SetCut("BCUTE", cut);
- gMC->SetCut("BCUTM", cut);
- gMC->SetCut("DCUTE", cut);
- gMC->SetCut("DCUTM", cut);
- gMC->SetCut("PPCUTM", cut);
- gMC->SetCut("TOFMAX", tofmax);
-
- //
- //=======================================================================
- // ************* STEERING parameters FOR ALICE SIMULATION **************
- // --- Specify event type to be tracked through the ALICE setup
- // --- All positions are in cm, angles in degrees, and P and E in GeV
- if (gSystem->Getenv("CONFIG_NPARTICLES"))
- int nParticles = atoi(gSystem->Getenv("CONFIG_NPARTICLES"));
- else
- int nParticles = 1000;
-
- cout << "\t* Creating and configuring generator for " << nParticles
- << " particles..." << endl;
-
- AliGenHIJINGpara *gener = new AliGenHIJINGpara(nParticles);
-
- gener->SetMomentumRange(2, 999);
- gener->SetPhiRange(0, 360);
- // Set pseudorapidity range from -8 to 8.
- Float_t thmin = EtaToTheta( 3.); // theta min. <---> eta max
- Float_t thmax = EtaToTheta(-3.); // theta max. <---> eta min
- gener->SetThetaRange(thmin,thmax);
- gener->SetOrigin(0, 0, 0); //vertex position
- gener->SetSigma(0, 0, 0); //Sigma in (X,Y,Z) (cm) on IP position
- gener->Init();
- //
- // Activate this line if you want the vertex smearing to happen
- // track by track
- //
-
-
- gAlice->SetDebug(10);
- if (smag == k2kG) {
- comment = comment.Append(" | L3 field 0.2 T");
- } else if (smag == k4kG) {
- comment = comment.Append(" | L3 field 0.4 T");
- } else if (smag == k5kG) {
- comment = comment.Append(" | L3 field 0.5 T");
+ if (rl == 0x0)
+ {
+ gAlice->Fatal("Config.C","Can not instatiate the Run Loader");
+ return;
+ }
+ rl->SetCompressionLevel(2);
+ rl->SetNumberOfEventsPerFile(3);
+ gAlice->SetRunLoader(rl);
+
+ // gAlice->SetGeometryFromFile("geometry.root");
+
+ // Uncomment if you want to load geometry from OCDB! >>>>
+/*
+ if(!AliCDBManager::Instance()->IsDefaultStorageSet()){
+ cout << "#####################################################" << endl;
+ cout << "# #" << endl;
+ cout << "# WARNING: CDB DEFAULT STORAGE NOT SET !!! #" << endl;
+ cout << "# SETTING IT TO local://$ALICE_ROOT/OCDB !!! #" << endl;
+ cout << "# #" << endl;
+ cout << "#####################################################" << endl;
+
+ AliCDBManager::Instance()->SetDefaultStorage("local://$ALICE_ROOT/OCDB");
}
-
-
- if (srad == kGluonRadiation)
- {
- comment = comment.Append(" | Gluon Radiation On");
-
- } else {
- comment = comment.Append(" | Gluon Radiation Off");
+
+ if(AliCDBManager::Instance()->GetRun() < 0){
+ cout << "#####################################################" << endl;
+ cout << "# #" << endl;
+ cout << "# WARNING: RUN NUMBER NOT SET !!! #" << endl;
+ cout << "# SETTING IT TO 0 !!! #" << endl;
+ cout << "# #" << endl;
+ cout << "#####################################################" << endl;
+
+ AliCDBManager::Instance()->SetRun(0);
}
-
- if (sgeo == kHoles)
+ gAlice->SetGeometryFromCDB();
+*/
+ // Uncomment if you want to load geometry from OCDB! <<<<
+
+ // Set the trigger configuration
+ AliSimulation::Instance()->SetTriggerConfig("Pb-Pb");
+ cout<<"Trigger configuration is set to Pb-Pb"<<endl;
+
+ //
+ // Set External decayer
+ TVirtualMCDecayer *decayer = new AliDecayerPythia();
+
+ decayer->SetForceDecay(kAll);
+ decayer->Init();
+ gMC->SetExternalDecayer(decayer);
+ //=======================================================================
+ // ************* STEERING parameters FOR ALICE SIMULATION **************
+ // --- Specify event type to be tracked through the ALICE setup
+ // --- All positions are in cm, angles in degrees, and P and E in GeV
+
+
+ gMC->SetProcess("DCAY",1);
+ gMC->SetProcess("PAIR",1);
+ gMC->SetProcess("COMP",1);
+ gMC->SetProcess("PHOT",1);
+ gMC->SetProcess("PFIS",0);
+ gMC->SetProcess("DRAY",0);
+ gMC->SetProcess("ANNI",1);
+ gMC->SetProcess("BREM",1);
+ gMC->SetProcess("MUNU",1);
+ gMC->SetProcess("CKOV",1);
+ gMC->SetProcess("HADR",1);
+ gMC->SetProcess("LOSS",2);
+ gMC->SetProcess("MULS",1);
+ gMC->SetProcess("RAYL",1);
+
+ Float_t cut = 1.e-3; // 1MeV cut by default
+ Float_t tofmax = 1.e10;
+
+ gMC->SetCut("CUTGAM", cut);
+ gMC->SetCut("CUTELE", cut);
+ gMC->SetCut("CUTNEU", cut);
+ gMC->SetCut("CUTHAD", cut);
+ gMC->SetCut("CUTMUO", cut);
+ gMC->SetCut("BCUTE", cut);
+ gMC->SetCut("BCUTM", cut);
+ gMC->SetCut("DCUTE", cut);
+ gMC->SetCut("DCUTM", cut);
+ gMC->SetCut("PPCUTM", cut);
+ gMC->SetCut("TOFMAX", tofmax);
+
+
+ int nParticles = 100;
+ if (gSystem->Getenv("CONFIG_NPARTICLES"))
{
- comment = comment.Append(" | Holes for PHOS/RICH");
-
- } else {
- comment = comment.Append(" | No holes for PHOS/RICH");
+ nParticles = atoi(gSystem->Getenv("CONFIG_NPARTICLES"));
}
-
- printf("\n \n Comment: %s \n \n", comment.Data());
-
-
-// Field (L3 0.4 T)
- AliMagFMaps* field = new AliMagFMaps("Maps","Maps", 2, 1., 10., smag);
- field->SetL3ConstField(0); //Using const. field in the barrel
+
+ AliGenCocktail *gener = new AliGenCocktail();
+ gener->SetPhiRange(0, 360);
+ // Set pseudorapidity range from -8 to 8.
+ Float_t thmin = EtaToTheta(8); // theta min. <---> eta max
+ Float_t thmax = EtaToTheta(-8); // theta max. <---> eta min
+ gener->SetThetaRange(thmin,thmax);
+ gener->SetOrigin(0, 0, 0); //vertex position
+ gener->SetSigma(0, 0, 0); //Sigma in (X,Y,Z) (cm) on IP position
+
+ AliGenHIJINGpara *hijingparam = new AliGenHIJINGpara(nParticles);
+ hijingparam->SetMomentumRange(0.2, 999);
+ gener->AddGenerator(hijingparam,"HIJING PARAM",1);
+
+// AliGenBox *genbox = new AliGenBox(nParticles);
+// genbox->SetPart(kGamma);
+// genbox->SetPtRange(0.3, 10.00);
+// gener->AddGenerator(genbox,"GENBOX GAMMA for PHOS",1);
+ gener->Init();
+
+
+ //
+ // Activate this line if you want the vertex smearing to happen
+ // track by track
+ //
+ //gener->SetVertexSmear(perTrack);
+ // Field (L3 0.4 T)
+ TGeoGlobalMagField::Instance()->SetField(new AliMagF("Maps","Maps", -1., -1., AliMagF::k5kG));
+
+ Int_t iABSO = 1;
+ Int_t iDIPO = 1;
+ Int_t iFMD = 1;
+ Int_t iFRAME = 1;
+ Int_t iHALL = 1;
+ Int_t iITS = 1;
+ Int_t iMAG = 1;
+ Int_t iMUON = 1;
+ Int_t iPHOS = 1;
+ Int_t iPIPE = 1;
+ Int_t iPMD = 1;
+ Int_t iHMPID = 1;
+ Int_t iSHIL = 1;
+ Int_t iT0 = 1;
+ Int_t iTOF = 1;
+ Int_t iTPC = 1;
+ Int_t iTRD = 1;
+ Int_t iZDC = 1;
+ Int_t iEMCAL = 1;
+ Int_t iACORDE = 1;
+ Int_t iVZERO = 1;
rl->CdGAFile();
- gAlice->SetField(field);
-
- Int_t iABSO = 0; //1
- Int_t iCRT = 0; //Not good ?
- Int_t iDIPO = 0; //1
- Int_t iFMD = 0; //1
- Int_t iFRAME = 0; //1
- Int_t iHALL = 0; //1
- Int_t iITS = 0; //1
- Int_t iMAG = 0; //1
- Int_t iMUON = 0; //1. Not good (newFlagLttc=10000 is outside array bounds)
- Int_t iPHOS = 0; //1
- Int_t iPIPE = 0; //1
- Int_t iPMD = 0; //Not good (too many regions)
- Int_t iRICH = 1; //1. Not good (no tracking with FRAME)
- Int_t iSHIL = 0; //1. Not good (no tracking) (it works alone)
- Int_t iSTART = 0; //1. Not good (no tracking) (it works alone)
- Int_t iTOF = 0; //1. Not good (no tracking) (newFlagLttc=10000 is outside array bounds if alone)
- Int_t iTPC = 1;
- Int_t iTRD = 0; //1. Not good (no tracking) (Crash alone with FRAME)
- Int_t iZDC = 0; //1. Needs SHIL and others
- Int_t iEMCAL = 0; //Not good (Crash)
- Int_t iVZERO = 0;
-
- cout << "\t* Creating the detectors ..." << endl;
- //=================== Alice BODY parameters =============================
//=================== Alice BODY parameters =============================
AliBODY *BODY = new AliBODY("BODY", "Alice envelop");
-
-
+
if (iMAG)
{
//=================== MAG parameters ============================
// --- on the selected Magnet dimensions ---
AliMAG *MAG = new AliMAG("MAG", "Magnet");
}
-
-
+
+
if (iABSO)
{
//=================== ABSO parameters ============================
- AliABSO *ABSO = new AliABSOv0("ABSO", "Muon Absorber");
+ AliABSO *ABSO = new AliABSOv3("ABSO", "Muon Absorber");
}
-
+
if (iDIPO)
{
//=================== DIPO parameters ============================
-
- AliDIPO *DIPO = new AliDIPOv2("DIPO", "Dipole version 2");
+
+ AliDIPO *DIPO = new AliDIPOv3("DIPO", "Dipole version 3");
}
-
+
if (iHALL)
{
//=================== HALL parameters ============================
-
- AliHALL *HALL = new AliHALL("HALL", "Alice Hall");
+
+ AliHALL *HALL = new AliHALLv3("HALL", "Alice Hall");
}
-
-
+
+
if (iFRAME)
{
//=================== FRAME parameters ============================
-
+
AliFRAMEv2 *FRAME = new AliFRAMEv2("FRAME", "Space Frame");
- if (sgeo == kHoles) {
- FRAME->SetHoles(1);
- } else {
- FRAME->SetHoles(0);
- }
+ FRAME->SetHoles(1);
}
-
+
if (iSHIL)
{
//=================== SHIL parameters ============================
-
- AliSHIL *SHIL = new AliSHILv2("SHIL", "Shielding Version 2");
+
+ AliSHIL *SHIL = new AliSHILv3("SHIL", "Shielding Version 3");
}
-
-
+
+
if (iPIPE)
{
//=================== PIPE parameters ============================
-
- AliPIPE *PIPE = new AliPIPEv0("PIPE", "Beam Pipe");
+
+ AliPIPE *PIPE = new AliPIPEv3("PIPE", "Beam Pipe");
}
-
- if(iITS) {
-
- //=================== ITS parameters ============================
- //
- // As the innermost detector in ALICE, the Inner Tracking System "impacts" on
- // almost all other detectors. This involves the fact that the ITS geometry
- // still has several options to be followed in parallel in order to determine
- // the best set-up which minimizes the induced background. All the geometries
- // available to date are described in the following. Read carefully the comments
- // and use the default version (the only one uncommented) unless you are making
- // comparisons and you know what you are doing. In this case just uncomment the
- // ITS geometry you want to use and run Aliroot.
- //
- // Detailed geometries:
- //
- //
- //AliITS *ITS = new AliITSv5symm("ITS","Updated ITS TDR detailed version with symmetric services");
- //
- //AliITS *ITS = new AliITSv5asymm("ITS","Updates ITS TDR detailed version with asymmetric services");
- //
- AliITSvPPRasymmFMD *ITS = new AliITSvPPRasymmFMD("ITS","New ITS PPR detailed version with asymmetric services");
- ITS->SetMinorVersion(2); // don't touch this parameter if you're not an ITS developer
- ITS->SetReadDet(kTRUE); // don't touch this parameter if you're not an ITS developer
- // ITS->SetWriteDet("$ALICE_ROOT/ITS/ITSgeometry_vPPRasymm2.det"); // don't touch this parameter if you're not an ITS developer
- ITS->SetThicknessDet1(200.); // detector thickness on layer 1 must be in the range [100,300]
- ITS->SetThicknessDet2(200.); // detector thickness on layer 2 must be in the range [100,300]
- ITS->SetThicknessChip1(200.); // chip thickness on layer 1 must be in the range [150,300]
- ITS->SetThicknessChip2(200.); // chip thickness on layer 2 must be in the range [150,300]
- ITS->SetRails(0); // 1 --> rails in ; 0 --> rails out
- ITS->SetCoolingFluid(1); // 1 --> water ; 0 --> freon
-
- // Coarse geometries (warning: no hits are produced with these coarse geometries and they unuseful
- // for reconstruction !):
- //
- //
- //AliITSvPPRcoarseasymm *ITS = new AliITSvPPRcoarseasymm("ITS","New ITS PPR coarse version with asymmetric services");
- //ITS->SetRails(0); // 1 --> rails in ; 0 --> rails out
- //ITS->SetSupportMaterial(0); // 0 --> Copper ; 1 --> Aluminum ; 2 --> Carbon
- //
- //AliITS *ITS = new AliITSvPPRcoarsesymm("ITS","New ITS PPR coarse version with symmetric services");
- //ITS->SetRails(0); // 1 --> rails in ; 0 --> rails out
- //ITS->SetSupportMaterial(0); // 0 --> Copper ; 1 --> Aluminum ; 2 --> Carbon
- //
- //
- //
- // Geant3 <-> EUCLID conversion
- // ============================
- //
- // SetEUCLID is a flag to output (=1) or not to output (=0) both geometry and
- // media to two ASCII files (called by default ITSgeometry.euc and
- // ITSgeometry.tme) in a format understandable to the CAD system EUCLID.
- // The default (=0) means that you dont want to use this facility.
- //
- ITS->SetEUCLID(0);
+
+ if (iITS)
+ {
+ //=================== ITS parameters ============================
+
+ AliITS *ITS = new AliITSv11Hybrid("ITS","ITS v11Hybrid");
}
-
+
if (iTPC)
{
- //============================ TPC parameters ================================
- // --- This allows the user to specify sectors for the SLOW (TPC geometry 2)
- // --- Simulator. SecAL (SecAU) <0 means that ALL lower (upper)
- // --- sectors are specified, any value other than that requires at least one
- // --- sector (lower or upper)to be specified!
- // --- Reminder: sectors 1-24 are lower sectors (1-12 -> z>0, 13-24 -> z<0)
- // --- sectors 25-72 are the upper ones (25-48 -> z>0, 49-72 -> z<0)
- // --- SecLows - number of lower sectors specified (up to 6)
- // --- SecUps - number of upper sectors specified (up to 12)
- // --- Sens - sensitive strips for the Slow Simulator !!!
- // --- This does NOT work if all S or L-sectors are specified, i.e.
- // --- if SecAL or SecAU < 0
- //
- //
- //-----------------------------------------------------------------------------
-
- // gROOT->LoadMacro("SetTPCParam.C");
- // AliTPCParam *param = SetTPCParam();
+ //============================ TPC parameters ===================
AliTPC *TPC = new AliTPCv2("TPC", "Default");
-
- // All sectors included
- TPC->SetSecAL(-1);
- TPC->SetSecAU(-1);
-
}
-
-
+
+
if (iTOF) {
//=================== TOF parameters ============================
- AliTOF *TOF = new AliTOFv4T0("TOF", "normal TOF");
+ AliTOF *TOF = new AliTOFv6T0("TOF", "normal TOF");
}
-
-
- if (iRICH)
+
+
+ if (iHMPID)
{
- //=================== RICH parameters ===========================
- AliRICH *RICH = new AliRICHv1("RICH", "normal RICH");
-
+ //=================== HMPID parameters ===========================
+ AliHMPID *HMPID = new AliHMPIDv3("HMPID", "normal HMPID");
+
}
-
-
+
+
if (iZDC)
{
//=================== ZDC parameters ============================
-
- AliZDC *ZDC = new AliZDCv2("ZDC", "normal ZDC");
+
+ AliZDC *ZDC = new AliZDCv3("ZDC", "normal ZDC");
}
-
+
if (iTRD)
{
//=================== TRD parameters ============================
-
+
AliTRD *TRD = new AliTRDv1("TRD", "TRD slow simulator");
-
- // Select the gas mixture (0: 97% Xe + 3% isobutane, 1: 90% Xe + 10% CO2)
- TRD->SetGasMix(1);
- if (sgeo == kHoles) {
- // With hole in front of PHOS
- TRD->SetPHOShole();
- // With hole in front of RICH
- TRD->SetRICHhole();
- }
- // Switch on TR
- AliTRDsim *TRDsim = TRD->CreateTR();
}
-
+
if (iFMD)
{
//=================== FMD parameters ============================
- AliFMD *FMD = new AliFMDv1("FMD", "normal FMD");
+ AliFMD *FMD = new AliFMDv1("FMD", "normal FMD");
}
-
+
if (iMUON)
{
//=================== MUON parameters ===========================
-
+ // New MUONv1 version (geometry defined via builders)
AliMUON *MUON = new AliMUONv1("MUON", "default");
- MUON->AddGeometryBuilder(new AliMUONSt1GeometryBuilder(MUON));
- MUON->AddGeometryBuilder(new AliMUONSt2GeometryBuilder(MUON));
- MUON->AddGeometryBuilder(new AliMUONSlatGeometryBuilder(MUON));
- MUON->AddGeometryBuilder(new AliMUONTriggerGeometryBuilder(MUON));
}
//=================== PHOS parameters ===========================
-
+
if (iPHOS)
{
AliPHOS *PHOS = new AliPHOSv1("PHOS", "IHEP");
}
-
-
+
+
if (iPMD)
{
//=================== PMD parameters ============================
AliPMD *PMD = new AliPMDv1("PMD", "normal PMD");
}
-
- if (iSTART)
+
+ if (iT0)
{
- //=================== START parameters ============================
- AliSTART *START = new AliSTARTv1("START", "START Detector");
+ //=================== T0 parameters ============================
+ AliT0 *T0 = new AliT0v1("T0", "T0 Detector");
}
-
+
if (iEMCAL)
{
//=================== EMCAL parameters ============================
- AliEMCAL *EMCAL = new AliEMCALv1("EMCAL", "EMCAL_55_25");
+ AliEMCAL *EMCAL = new AliEMCALv2("EMCAL", "EMCAL_COMPLETE");
}
-
- if (iCRT)
+
+ if (iACORDE)
{
- //=================== CRT parameters ============================
- AliCRT *CRT = new AliCRTv0("CRT", "normal ACORDE");
+ //=================== ACORDE parameters ============================
+ AliACORDE *ACORDE = new AliACORDEv1("ACORDE", "normal ACORDE");
}
-
+
if (iVZERO)
{
- //=================== CRT parameters ============================
- AliVZERO *VZERO = new AliVZEROv3("VZERO", "normal VZERO");
+ //=================== VZERO parameters ============================
+ AliVZERO *VZERO = new AliVZEROv7("VZERO", "normal VZERO");
}
-
-
+
+ AliLog::Message(AliLog::kInfo, "End of Config", "Config.C", "Config.C", "Config()"," Config.C", __LINE__);
+
}
-
+
Float_t EtaToTheta(Float_t arg){
return (180./TMath::Pi())*2.*atan(exp(-arg));
}
+
+void LoadPythia()
+{
+ // Load Pythia related libraries
+ gSystem->Load("liblhapdf.so"); // Parton density functions
+ gSystem->Load("libEGPythia6.so"); // TGenerator interface
+ gSystem->Load("libpythia6.so"); // Pythia
+ gSystem->Load("libAliPythia6.so"); // ALICE specific implementations
+}