-#ifndef ALITRDMCMSIMNEW_H
-#define ALITRDMCMSIMNEW_H
+#ifndef ALITRDMCMSIM_H
+#define ALITRDMCMSIM_H
/* Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
* See cxx source for full Copyright notice */
// //
///////////////////////////////////////////////////////
-#include <TObject.h>
-#include <TClonesArray.h>
+#include <iostream>
+
+class TObject;
+class TClonesArray;
+class TH2F;
class AliRunLoader;
class AliTRDfeeParam;
-class AliTRDSimParam;
class AliTRDtrapConfig;
-class AliTRDcalibDB;
-class AliTRDgeometry;
-class AliTRDpadPlane;
class AliTRDarrayADC;
+class AliTRDarrayDictionary;
+class AliTRDdigitsManager;
class AliTRDmcmSim : public TObject {
public:
AliTRDmcmSim();
virtual ~AliTRDmcmSim();
- void Init( Int_t cha, Int_t rob, Int_t mcm, Bool_t newEvent = kFALSE ); // Initialize MCM by the position parameters
- void Reset(); // clears filter registers and internal data
+ void Init(Int_t det, Int_t rob, Int_t mcm, Bool_t newEvent = kFALSE);
+ // Initialize MCM by the position parameters
+
+ void Reset();
+ // clears filter registers and internal data
+
+ Bool_t LoadMCM(AliRunLoader* const runloader, Int_t det, Int_t rob, Int_t mcm);
- Bool_t LoadMCM(AliRunLoader *runloader, Int_t det, Int_t rob, Int_t mcm);
void NoiseTest(Int_t nsamples, Int_t mean, Int_t sigma, Int_t inputGain = 1, Int_t inputTail = 2);
+ Int_t GetDataRaw(Int_t iadc, Int_t timebin) const { return (fADCR[iadc][timebin] >> 2); }
+ // Get unfiltered ADC data
+ Int_t GetDataFiltered(Int_t iadc, Int_t timebin) const { return (fADCF[iadc][timebin] >> 2); }
+ // Get filtered ADC data
+
void SetData(Int_t iadc, Int_t *adc); // Set ADC data with array
- void SetData(Int_t iadc, Int_t it, Int_t adc ); // Set ADC data
- void SetData(AliTRDarrayADC *adcArray); // Set ADC data from adcArray
- void SetDataPedestal(Int_t iadc ); // Fill ADC data with pedestal values
+ void SetData(Int_t iadc, Int_t it, Int_t adc); // Set ADC data
+ void SetData(AliTRDarrayADC *adcArray,
+ AliTRDdigitsManager *digitsManager = 0x0); // Set ADC data from adcArray
+ void SetDataByPad(AliTRDarrayADC *adcArray,
+ AliTRDdigitsManager *digitsManager = 0x0); // Set ADC data from adcArray
+ void SetDataPedestal(Int_t iadc); // Fill ADC data with pedestal values
+
+ static Bool_t GetApplyCut() { return fgApplyCut; }
+ static void SetApplyCut(Bool_t applyCut) { fgApplyCut = applyCut; }
+
+ static Int_t GetAddBaseline() { return fgAddBaseline; }
+ static void SetAddBaseline(Int_t baseline) { fgAddBaseline = baseline; }
+ // Additional baseline which is added for the processing
+ // in the TRAP and removed when writing back the data.
+ // This is needed to run with TRAP parameters set for a
+ // different baseline but it will not change the baseline
+ // of the output.
Int_t GetDetector() const { return fDetector; }; // Returns Chamber ID (0-539)
- Int_t GetRobPos() const { return fRobPos; }; // Returns ROB position (0-7)
- Int_t GetMcmPos() const { return fMcmPos; }; // Returns MCM position (0-17) (16,17 are mergers)
- Int_t GetRow() const { return fRow; }; // Returns Row number on chamber where the MCM is sitting
- Int_t GetCol( Int_t iadc ); // Get corresponding column (0-143) from for ADC channel iadc = [0:20]
+ Int_t GetRobPos() const { return fRobPos; }; // Returns ROB position (0-7)
+ Int_t GetMcmPos() const { return fMcmPos; }; // Returns MCM position (0-17) (16,17 are mergers)
+ Int_t GetRow() const { return fRow; }; // Returns Row number on chamber where the MCM is sitting
+ Int_t GetCol( Int_t iadc ); // Get corresponding column (0-143) from for ADC channel iadc = [0:20]
// for the ADC/Col mapping, see: http://wiki.kip.uni-heidelberg.de/ti/TRD/index.php/Image:ROB_MCM_numbering.pdf
- void WriteData(AliTRDarrayADC *digits);
+ void WriteData(AliTRDarrayADC *digits);
+ Bool_t StoreTracklets(); // Stores tracklets via runloader
- Int_t ProduceRawStream( UInt_t *buf, Int_t bufsize, UInt_t iEv = 0 ); // Produce raw data stream - Read data format
+ Int_t ProduceRawStream( UInt_t *buf, Int_t bufsize, UInt_t iEv = 0 ) const; // Produce raw data stream - Real data format
Int_t ProduceTrackletStream( UInt_t *buf, Int_t bufsize ); // produce the tracklet stream for this MCM
// different stages of processing in the TRAP
void FilterTail(); // Apply tail filter
// filter initialization (resets internal registers)
- void FilterPedestalInit();
+ void FilterPedestalInit(Int_t baseline = 10);
void FilterGainInit();
- void FilterTailInit(Int_t baseline); //??? automatic baseline??
+ void FilterTailInit(Int_t baseline = -1);
// feed single sample to individual filter
// this changes the internal registers
- // all filters operate on 12-bit values!
+ // all filters operate on (10+2)-bit values!
UShort_t FilterPedestalNextSample(Int_t adc, Int_t timebin, UShort_t value);
UShort_t FilterGainNextSample(Int_t adc, UShort_t value);
UShort_t FilterTailNextSample(Int_t adc, UShort_t value);
void TrackletSelection();
void FitTracklet();
- TClonesArray* GetTrackletArray() { return fTrackletArray; }
+ Int_t GetNHits() const { return fNHits; }
+ Bool_t GetHit(Int_t index, Int_t &channel, Int_t &timebin, Int_t &qtot, Int_t &ypos, Float_t &y, Int_t &label) const;
+ TClonesArray* GetTrackletArray() const { return fTrackletArray; }
// data display
- void Print(Option_t* option="") const; // print stored data to stdout
- void Draw(Option_t *option =""); // draw data (ADC data, hits and tracklets)
- void DumpData( char *f, char *target ); // Dump data stored (only for debugging)
+ void Print(Option_t* const option="") const; // print stored data to stdout
+ void Draw(Option_t* const option =""); // draw data (ADC data, hits and tracklets)
+
+ friend std::ostream& operator<<(std::ostream &os, const AliTRDmcmSim &mcm); // data output using ostream (e.g. cout << mcm;)
+ static ostream& Cfdat(ostream &os); // manipulator to activate cfdat output
+ static ostream& Raw (ostream &os); // manipulator to activate raw output
+ static ostream& Text (ostream &os); // manipulator to activate text output
protected:
- Bool_t CheckInitialized(); // Check whether the class is initialized
+ Bool_t CheckInitialized() const; // Check whether the class is initialized
- Bool_t fInitialized; // Status whether the class is initialized or not
- Int_t fMaxTracklets; // maximum number of tracklet-words submitted per mcm **new** //???
- Int_t fDetector; // Chamber ID
+ void SetNTimebins(Int_t ntimebins); // allocate data arrays corr. to the no. of timebins
+
+ static const Int_t fgkFormatIndex; // index for format settings in stream
+
+ static const Int_t fgkNADC; // Number of ADC
+ static const Int_t fgkMaxTracklets = 4; // maximum number of tracklet-words submitted per MCM (one per CPU)
+ static const Int_t fgkAddDigits = 2; // additional digits used for internal representation of ADC data
+ // all internal data as after data control block (i.e. 12 bit), s. TRAP manual
+ static const Int_t fgkNCPU = 4; // Number of CPUs in the TRAP
+ static const Int_t fgkNHitsMC = 100; // maximum number of hits for which MC information is kept
+
+ static const UShort_t fgkFPshifts[4]; // shifts for pedestal filter
+
+
+ Bool_t fInitialized; // memory is allocated if initialized
+ Int_t fDetector; // Chamber ID
Int_t fRobPos; // ROB Position on chamber
Int_t fMcmPos; // MCM Position on chamber
Int_t fRow; // Pad row number (0-11 or 0-15) of the MCM on chamber
- Int_t fNADC; // Number of ADC (usually 21) //??? static const
- Int_t fNTimeBin; // Number of Timebins (variable) //??? why stored here? taken from TRAPconfig
+ Int_t fNTimeBin; // Number of timebins currently allocated
Int_t **fADCR; // Array with MCM ADC values (Raw, 12 bit)
Int_t **fADCF; // Array with MCM ADC values (Filtered, 12 bit)
- UInt_t *fMCMT; // tracklet word for one mcm/trap-chip **new** //??? needed?
+ UInt_t *fMCMT; // tracklet word for one mcm/trap-chip
TClonesArray *fTrackletArray; // Array of AliTRDtrackletMCM which contains MC information in addition to the tracklet word
- Int_t **fZSM; // Zero suppression map
- Int_t *fZSM1Dim; // Zero suppression map (1 dimensional projection)
+ Int_t *fZSMap; // Zero suppression map (1 dimensional projection)
- static const Int_t fgkAddDigits = 2; // additional digits used for internal representation
- // all internal data as after data control block (i.e. 12 bit), s. TRAP manual
- static const Int_t fgkNCPU = 4; // Number of CPUs in the TRAP
Int_t fFitPtr[fgkNCPU]; // pointer to the tracklet to be calculated by CPU i
- static const Int_t fgkNHitsMC = 100; // maximum number of hits for which MC information is kept
// Parameter classes
AliTRDfeeParam *fFeeParam; // FEE parameters
AliTRDtrapConfig *fTrapConfig; // TRAP config
- AliTRDSimParam *fSimParam; // Simulation parameters
- AliTRDcalibDB *fCal; // Calibration interface
- AliTRDgeometry *fGeo; // Geometry
+
+ AliTRDdigitsManager *fDigitsManager; // pointer to digits manager used for MC label calculation
+ AliTRDarrayDictionary* fDict[3]; // pointers to label dictionaries
+
// internal filter registers
UInt_t* fPedAcc; // Accumulator for pedestal filter
// hit detection
// individual hits can be stored as MC info
- struct Hit_t {
- Int_t channel;
- Int_t timebin;
- Int_t qtot;
- Int_t ypos;
- Int_t label;
- } fHits[fgkNHitsMC]; // Array of detected hits (only available in MC)
+ struct Hit_t { // Array of detected hits (only available in MC)
+ Int_t fChannel; // ADC channel of the hit
+ Int_t fTimebin; // timebin of the hit
+ Int_t fQtot; // total charge of the hit
+ Int_t fYpos; // calculated y-position
+ Int_t fLabel; // label (only in MC)
+ } fHits[fgkNHitsMC];
Int_t fNHits; // Number of detected hits
// tracklet calculation
- struct FitReg_t {
- Int_t Nhits;
- UInt_t Q0;
- UInt_t Q1;
- UInt_t SumX;
- Int_t SumY;
- UInt_t SumX2;
- UInt_t SumY2;
- Int_t SumXY;
- } *fFitReg; // pointer to the 18 fit registers
-
- //??? cleaning up
+ struct FitReg_t { // pointer to the 18 fit registers
+ Int_t fNhits; // number of hits
+ UInt_t fQ0; // charge accumulated in first window
+ UInt_t fQ1; // charge accumulated in second window
+ UInt_t fSumX; // sum x
+ Int_t fSumY; // sum y
+ UInt_t fSumX2; // sum x**2
+ UInt_t fSumY2; // sum y**2
+ Int_t fSumXY; // sum x*y
+ } *fFitReg;
+
+ // Sort functions as in TRAP
void Sort2(UShort_t idx1i, UShort_t idx2i, UShort_t val1i, UShort_t val2i,
- UShort_t *idx1o, UShort_t *idx2o, UShort_t *val1o, UShort_t *val2o);
+ UShort_t *idx1o, UShort_t *idx2o, UShort_t *val1o, UShort_t *val2o) const;
void Sort3(UShort_t idx1i, UShort_t idx2i, UShort_t idx3i,
UShort_t val1i, UShort_t val2i, UShort_t val3i,
UShort_t *idx1o, UShort_t *idx2o, UShort_t *idx3o,
UShort_t val1i, UShort_t val2i, UShort_t val3i, UShort_t val4i, UShort_t val5i, UShort_t val6i,
UShort_t *idx5o, UShort_t *idx6o);
- UInt_t AddUintClipping(UInt_t a, UInt_t b, UInt_t nbits); // Add a and b (unsigned) with clipping to the maximum value representable by nbits
+ UInt_t AddUintClipping(UInt_t a, UInt_t b, UInt_t nbits) const;
+ // Add a and b (unsigned) with clipping to the maximum value representable by nbits
private:
AliTRDmcmSim(const AliTRDmcmSim &m); // not implemented
AliTRDmcmSim &operator=(const AliTRDmcmSim &m); // not implemented
+ static Bool_t fgApplyCut; // apply cut on deflection length
- ClassDef(AliTRDmcmSim,4)
+ static Int_t fgAddBaseline; // add baseline to the ADC values
+
+ ClassDef(AliTRDmcmSim,6)
};
+std::ostream& operator<<(std::ostream& os, const AliTRDmcmSim& mcm);
+
#endif