/*
$Log$
+Revision 1.18 2001/03/20 08:21:55 coppedis
+ZDC needs PIPE, ABSO, DIPO and SHIL
+
+Revision 1.17 2001/03/16 16:18:03 coppedis
+Correction for superposition of ZDC volumes with MUON arm one
+
+Revision 1.16 2001/03/15 16:01:11 coppedis
+Code review
+
+Revision 1.15 2001/01/26 19:56:27 hristov
+Major upgrade of AliRoot code
+
+Revision 1.14 2000/12/12 13:17:01 coppedis
+Minor corrections suggested by P. Hristov
+
+Revision 1.12 2000/12/01 08:19:01 coppedis
+Adding a message error if ZDC is constructed without DIPO
+
+Revision 1.11 2000/11/30 17:21:03 coppedis
+Introduce hit array fStHits reset only at the end of the event (for digitization)
+
+Revision 1.10 2000/11/22 11:32:58 coppedis
+Major code revision
+
+Revision 1.9 2000/10/02 21:28:20 fca
+Removal of useless dependecies via forward declarations
+
+Revision 1.8 2000/07/10 13:58:01 fca
+New version of ZDC from E.Scomparin & C.Oppedisano
+
+Revision 1.7 2000/01/19 17:17:40 fca
+
Revision 1.6 1999/09/29 09:24:35 fca
Introduction of the Copyright and cvs Log
///////////////////////////////////////////////////////////////////////////////
// //
// Zero Degree Calorimeter //
-// This class contains the basic functions for the Time Of Flight //
-// detector. Functions specific to one particular geometry are //
+// This class contains the basic functions for the ZDCs //
+// Functions specific to one particular geometry are //
// contained in the derived classes //
// //
-//Begin_Html
-/*
-<img src="picts/AliZDCClass.gif">
-</pre>
-<br clear=left>
-<font size=+2 color=red>
-<p>The responsible person for this module is
-<a href="mailto:Eugenio.Scomparin@cern.ch">Eugenio Scomparin</a>.
-</font>
-<pre>
-*/
-//End_Html
-// //
-// //
///////////////////////////////////////////////////////////////////////////////
+#include <stdlib.h>
+
+// --- ROOT system
#include <TBRIK.h>
#include <TNode.h>
+#include <TGeometry.h>
+#include <TFile.h>
+#include <TTree.h>
+// --- AliRoot header files
#include "AliZDC.h"
+#include "AliZDCHit.h"
#include "AliRun.h"
+#include "AliDetector.h"
#include "AliCallf77.h"
#include "AliConst.h"
#include "AliMC.h"
-#ifndef WIN32
-# define zdc_init zdc_init_
-# define zdc_step zdc_step_
-# define zdc_setbeam zdc_setbeam_
-# define zdc_sethijing zdc_sethijing_
-# define zdc_setvenus zdc_setvenus_
-# define zdc_setkine zdc_setkine_
-#else
-# define zdc_step ZDC_STEP
-# define zdc_setbeam ZDC_SETBEAM
-# define zdc_sethijing ZDC_SETHIJING
-# define zdc_setvenus ZDC_SETVENUS
-# define zdc_setkine ZDC_SETKINE
-#endif
-
-extern "C" void type_of_call zdc_init();
-extern "C" void type_of_call zdc_step();
-extern "C" void type_of_call zdc_setbeam(Int_t beam, Float_t fx, Float_t fy,
- Float_t sx, Float_t sy, Float_t div,
- Float_t angle, Int_t cross);
-extern "C" void type_of_call zdc_sethijing(Int_t hij, Int_t hijf, Int_t hijsp,
- DEFCHARD DEFCHARL);
-extern "C" void type_of_call zdc_setvenus(Int_t hiv, Int_t hivf, Int_t hivsp,
- DEFCHARD DEFCHARL);
-extern "C" void type_of_call zdc_setkine(Int_t code, Float_t pmom, Float_t cx,
- Float_t cy, Float_t cz, Int_t type,
- Int_t fermi);
ClassImp(AliZDC)
//
// Default constructor for the Zero Degree Calorimeter base class
//
- fIshunt = 0;
+
+ fIshunt = 1;
+
+ fNhits = 0;
+
+ fNStHits = 0;
+
+ fNPrimaryHits = 0;
+ fNoShower = 0;
}
//_____________________________________________________________________________
// Standard constructor for the Zero Degree Calorimeter base class
//
+ // Check that DIPO is there (otherwise tracking is wrong!!!)
+
+ AliModule* PIPE=gAlice->GetModule("PIPE");
+ AliModule* ABSO=gAlice->GetModule("ABSO");
+ AliModule* DIPO=gAlice->GetModule("DIPO");
+ AliModule* SHIL=gAlice->GetModule("SHIL");
+ if((!PIPE) || (!ABSO) || (!DIPO) || (!SHIL)) {
+ Error("Constructor","ZDC needs PIPE, ABSO, DIPO and SHIL!!!\n");
+ exit(1);
+ }
+
//
// Allocate the array of hits
- fHits = new TClonesArray("AliZDChit", 405);
- gAlice->AddHitList(fHits);
- fIshunt = 1;
-}
-
-//_____________________________________________________________________________
-void AliZDC::AddHit(Int_t track, Int_t *vol, Float_t *hits)
-{
- //
- // Add a Zero Degree Calorimeter hit
- //
- TClonesArray &lhits = *fHits;
- new(lhits[fNhits++]) AliZDChit(fIshunt,track,vol,hits);
-}
-
-//_____________________________________________________________________________
-void AliZDC::BuildGeometry()
-{
- //
- // Build the ROOT TNode geometry for event display
- // in the Zero Degree Calorimeter
- // This routine is dummy for the moment
- //
+ fIshunt = 1;
- // TNode *Node, *Top;
- // TBRIK *brik;
- // const int kColorZDC = kRed;
-
- //
- // Top=gAlice->GetGeometry()->GetNode("alice");
+ fHits = new TClonesArray("AliZDCHit",1000);
+ gAlice->AddHitList(fHits);
- // ZDC
- /*
- brik = new TBRIK("S_ZDC","ZDC box","void",300,300,5);
- Top->cd();
- Node = new TNode("ZDC","ZDC","S_ZDC",0,0,600,"");
- Node->SetLineColor(kColorZDC);
- fNodes->Add(Node);
- */
-}
+ fStHits = new TClonesArray("AliZDCHit",1000);
+ fNStHits = 0;
-//_____________________________________________________________________________
-Int_t AliZDC::DistancetoPrimitive(Int_t , Int_t )
-{
- //
- // Distance from the mouse to the Zero Degree Calorimeter
- // Dummy routine
- //
- return 9999;
-}
-
-//_____________________________________________________________________________
-void AliZDC::SetBeam(Int_t beam, Float_t fx, Float_t fy, Float_t sx,
- Float_t sy, Float_t div, Float_t angle, Int_t cross)
-{
- //
- // Set beam characteristic
- // This routine has to be revised as it is disconnected from the
- // actual generation in this version of AliRoot
- //
+ fNPrimaryHits = 0;
+ fNoShower = 0;
- // beam : 1 = gaussian beam
- // : 2 = uniform beam
- // fx : x-coordinate of beam offset
- // fy : y-coordinate of beam offset
- // sx : sigma-x of the beam (gaussian or uniform)
- // sy : sigma-y of the beam (gaussian or uniform)
- // div : divergency of the beam (32*10**-6 rad for LHC)
- // angle : beam crossing angle (100*10**-6 rad for LHC)
- // cross : 1 = horizontal beam crossing
- // : 2 = vertical beam crossing
- zdc_setbeam(beam,fx,fy,sx,sy,div,angle,cross);
}
-
-//_____________________________________________________________________________
-void AliZDC::SetHijing(Int_t hij, Int_t hijf, Int_t hijsp, const char *file)
+//____________________________________________________________________________
+AliZDC::~AliZDC()
{
//
- // Set the parameter for the HIJING generation
- // This routine has to be revised as it is disconnected from the
- // actual generation in this version of AliRoot
+ // ZDC destructor
//
- // HIJ : 1 = read HIJING event file
- // : 2 = " " " " + debug
- // HIJF : event number of the first event to be read from file
- // HIJSP: 0 = read all particles
- // : 1 = remove spectator nucleons
- zdc_sethijing(hij,hijf,hijsp, PASSCHARD(file) PASSCHARL(file));
-}
-
-//_____________________________________________________________________________
-void AliZDC::SetVenus(Int_t hiv, Int_t hivf, Int_t hivsp, const char *file)
-{
- //
- // Set the parameter for the VENUS generation
- // This routine has to be revised as it is disconnected from the
- // actual generation in this version of AliRoot
- //
+ fIshunt = 0;
- // HIV : 1 = read VENUS event file
- // : 2 = " " " " + debug
- // HIVF : event number of the first event to be read from file
- // HIVSP: 0 = read all particles
- // : 1 = remove spectator nucleons
- zdc_setvenus(hiv,hivf,hivsp, PASSCHARD(file) PASSCHARL(file));
+// delete fHits;
+// if(fStHits){
+// fStHits->Delete();
+// delete fStHits;
+// fNStHits = 0;
+// }
+// delete fDigits;
}
-
//_____________________________________________________________________________
-void AliZDC::SetKine(Int_t code, Float_t pmom, Float_t cx, Float_t cy,
- Float_t cz, Int_t type, Int_t fermi)
+void AliZDC::AddHit(Int_t track, Int_t *vol, Float_t *hits)
{
//
- // Set the parameter for the event generation
- // This routine has to be revised as it is disconnected from the
- // actual generation in this version of AliRoot
+ // Add a ZDC hit to the hit list.
+ // -> We make use of 2 array of hits:
+ // [1] fHits (the usual one) that contains hits for each PRIMARY
+ // [2] fStHits that contains hits for each EVENT and is used to
+ // obtain digits at the end of each event
//
+
+ static Float_t primKinEn, xImpact, yImpact, sFlag;
- // code : GEANT code of the test particle
- // pmom : absolute value of particle momentum
- // cx,cy,cz : director cosines of the track (if type)
- // type : 0 = take director cosines from cx,cy,cz
- // : <>0 = pseudorapidity of the test particle
- // fermi : 0 = no Fermi motion for the spectator nucleons
- // : 1 = Fermi motion for the spectator nucleons
- zdc_setkine(code,pmom,cx,cy,cz,type,fermi);
-}
-
-//_____________________________________________________________________________
-void AliZDC::StepManager()
-{
- //
- // Routine called at every step in the Zero Degree Calorimeter
- // This is a simple interface to the FORTRAN routine
- // A step manager should be written
- //
- zdc_step();
-}
+ AliZDCHit *newquad, *curevquad, *curprimquad;
+ newquad = new AliZDCHit(fIshunt, track, vol, hits);
-
-ClassImp(AliZDCv1)
-
+ TClonesArray &lsthits = *fStHits;
+ TClonesArray &lhits = *fHits;
+
+ Int_t i,j,kStHit = 1;
+ for(i=0; i<fNStHits; i++){
+ // If hits are equal (same track, same volume), sum them.
+ curevquad = (AliZDCHit*) lsthits[i];
+ kStHit = 1;
+ if(*curevquad == *newquad){
+ *curevquad = *curevquad+*newquad;
+ kStHit = 0;
+ }
+ }
-///////////////////////////////////////////////////////////////////////////////
-// //
-// Zero Degree Calorimeter version 1 //
-// //
-//Begin_Html
-/*
-<img src="picts/AliZDCv1Class.gif">
-*/
-//End_Html
-// //
-// //
-///////////////////////////////////////////////////////////////////////////////
+ for(j=0; j<fNhits; j++){
+ // If hits are equal (same track, same volume), sum them.
+ curprimquad = (AliZDCHit*) lhits[j];
+ if(*curprimquad == *newquad){
+ *curprimquad = *curprimquad+*newquad;
+ delete newquad;
+ return;
+ }
+ }
+
+ if(fNhits==0){
+ // First hit -> setting flag for primary or secondary particle
+ Int_t primary = gAlice->GetPrimary(track);
+ if(track != primary){
+ newquad->fSFlag = 1; // Hit created by secondary particle entering the ZDC
+ }
+ else if(track == primary){
+ newquad->fSFlag = 0; // Hit created by PRIMARY particle entering the ZDC
+ }
+ fNPrimaryHits += 1;
+ sFlag = newquad->fSFlag;
+ primKinEn = newquad->fPrimKinEn;
+ xImpact = newquad->fXImpact;
+ yImpact = newquad->fYImpact;
+ }
+ else{
+ newquad->fPrimKinEn = primKinEn;
+ newquad->fXImpact = xImpact;
+ newquad->fYImpact = yImpact;
+ newquad->fSFlag = sFlag;
+ }
-//_____________________________________________________________________________
-AliZDCv1::AliZDCv1() : AliZDC()
-{
- //
- // Default constructor for Zero Degree Calorimeter
- //
-}
-
-//_____________________________________________________________________________
-AliZDCv1::AliZDCv1(const char *name, const char *title)
- : AliZDC(name,title)
-{
- //
- // Standard constructor for Zero Degree Calorimeter
- //
-}
+ //Otherwise create a new hit
+ new(lhits[fNhits]) AliZDCHit(newquad);
+ fNhits++;
+
+ if(kStHit){
+ new(lsthits[fNStHits]) AliZDCHit(newquad);
+ fNStHits++;
+ }
+// if(fDebug == 1){
+ printf("\n Primary Hits --------------------------------------------------------\n");
+ fHits->Print("");
+ printf("\n Event Hits --------------------------------------------------------\n");
+ fStHits->Print("");
+// }
+
+ delete newquad;
+ }
+
//_____________________________________________________________________________
-void AliZDCv1::CreateGeometry()
+void AliZDC::ResetDigits()
{
//
- // Create the geometry for the Zero Degree Calorimeter version 1
- // -- Author : E Scomparin
+ // Reset number of digits and the digits array
//
- //Begin_Html
- /*
- <img src="picts/AliZDCv1.gif">
- */
- //End_Html
- //Begin_Html
- /*
- <img src="picts/AliZDCv1Tree.gif">
- */
- //End_Html
-
- // The following variables were illegaly initialized in zdc_init.
- // These variables should become data members of this class
- // once zdc_init has been converted
- //* Initialize COMMON block ZDC_CGEOM
- //*
-
- const Int_t NZPTX=4;
- const Int_t NZPTY=1;
- const Int_t NZNTX=2;
- const Int_t NZNTY=2;
-
- Float_t HDZN[3] = {4.0,4.0,50.0};
- Float_t HDZP[3] = {10.0,6.0,75.0};
- // Coordinates of the center of the ZDC front face in the MRS
- Float_t ZNPOS[3] = {-0.5,0.,11613.};
- Float_t ZPPOS[3] = {-21.0,0.,11563.};
- Float_t FIZN[3] = {0.,0.01825,50.0};
- Float_t FIZP[3] = {0.,0.01825,75.0};
- Float_t GRZN[3] = {0.025,0.025,50.0};
- Float_t GRZP[3] = {0.040,0.040,75.0};
- Int_t NCEN[3] = {11,11,0};
- Int_t NCEP[3] = {10,10,0};
-
- Float_t angle;
- Float_t zq, conpar[9], tubpar[3];
- Int_t im1, im2;
- Float_t zd1, zd2;
-
-
- Int_t *idtmed = fIdtmed->GetArray()-799;
-
- // -- Mother of the ZDC
- conpar[0] = 0.;
- conpar[1] = 360.;
- conpar[2] = 2.;
- conpar[3] = 1920.;
- conpar[4] = 0.;
- conpar[5] = 55.;
- conpar[6] = 13060.;
- conpar[7] = 0.;
- conpar[8] = 55.;
- gMC->Gsvolu("ZDC ", "PCON", idtmed[891], conpar, 9);
- gMC->Gspos("ZDC ", 1, "ALIC", 0., 0., 0., 0, "ONLY");
- // -- FIRST SECTION OF THE BEAM PIPE (from compensator dipole to
- // beginning of D1)
-
- zd1 = 1920.;
-
- tubpar[0] = 2.3;
- tubpar[1] = 2.5;
- tubpar[2] = 1961.75;
- gMC->Gsvolu("P001", "TUBE", idtmed[851], tubpar, 3);
- gMC->Gspos("P001", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY");
-
- //-- SECOND SECTION OF THE BEAM PIPE (FROM THE END OF D1 TO THE BEGINNING OF
- // D2)
-
- zd1 = 6316.+472.5;
-
- tubpar[0] = 7.3/2.;
- tubpar[1] = 7.7/2.;
- tubpar[2] = 90.*0.5;
- gMC->Gsvolu("P002", "TUBE", idtmed[851], tubpar, 3);
- gMC->Gspos("P002", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY");
-
- zd1 += tubpar[2] * 2.;
-
- tubpar[0] = 7.3/2.;
- tubpar[1] = 7.7/2.;
- tubpar[2] = 10.*0.5;
- gMC->Gsvolu("P003", "TUBE", idtmed[851], tubpar, 3);
- gMC->Gspos("P003", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY");
-
- zd1 += tubpar[2] * 2.;
-
- conpar[0] = 3.16/2.;
- conpar[1] = 7.3/2.;
- conpar[2] = 7.7/2.;
- conpar[3] = 9.8/2.;
- conpar[4] = 10.0/2.;
- gMC->Gsvolu("P004", "CONE", idtmed[851], conpar, 5);
- gMC->Gspos("P004", 1, "ZDC ", 0., 0., conpar[0] + zd1, 0, "ONLY");
-
- zd1 += conpar[0] * 2.;
-
- tubpar[0] = 9.8/2.;
- tubpar[1] = 10.0/2;
- tubpar[2] = 490./2.;
- gMC->Gsvolu("P005", "TUBE", idtmed[851], tubpar, 3);
- gMC->Gspos("P005", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY");
-
- zd1 += tubpar[2] * 2.;
-
- conpar[0] = 30./2.;
- conpar[1] = 9.8/2.;
- conpar[2] = 10.0/2.;
- conpar[3] = 20.4/2.;
- conpar[4] = 20.6/2.;
- gMC->Gsvolu("P006", "CONE", idtmed[851], conpar, 5);
- gMC->Gspos("P006", 1, "ZDC ", 0., 0., conpar[0] + zd1, 0, "ONLY");
-
- zd1 += conpar[0] * 2.;
-
- tubpar[0] = 20.4/2.;
- tubpar[1] = 20.6/2.;
- tubpar[2] = 150./2.;
- gMC->Gsvolu("P007", "TUBE", idtmed[851], tubpar, 3);
- gMC->Gspos("P007", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY");
-
- zd1 += tubpar[2] * 2.;
-
- conpar[0] = 13.6/2.;
- conpar[1] = 20.4/2.;
- conpar[2] = 20.6/2.;
- conpar[3] = 25.2/2.;
- conpar[4] = 25.4/2.;
- gMC->Gsvolu("P008", "CONE", idtmed[851], conpar, 5);
- gMC->Gspos("P008", 1, "ZDC ", 0., 0., conpar[0] + zd1, 0, "ONLY");
-
- zd1 += conpar[0] * 2.;
-
- tubpar[0] = 25.2/2.;
- tubpar[1] = 25.4/2.;
- tubpar[2] = 205.8/2.;
- gMC->Gsvolu("P009", "TUBE", idtmed[851], tubpar, 3);
- gMC->Gspos("P009", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY");
-
- zd1 += tubpar[2] * 2.;
-
- tubpar[0] = 43.8/2.;
- tubpar[1] = 44.0/2.;
- tubpar[2] = 500./2.;
- gMC->Gsvolu("P010", "TUBE", idtmed[851], tubpar, 3);
- gMC->Gspos("P010", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY");
-
- zd1 += tubpar[2] * 2.;
-
- tubpar[0] = 31.8/2.;
- tubpar[1] = 32.0/2.;
- tubpar[2] = 757.5/2.;
- gMC->Gsvolu("P011", "TUBE", idtmed[851], tubpar, 3);
- gMC->Gspos("P011", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY");
-
- zd1 += tubpar[2] * 2.;
-
- conpar[0] = 22.7/2.;
- conpar[1] = 31.8/2.;
- conpar[2] = 32.0/2.;
- conpar[3] = 39.8/2.;
- conpar[4] = 40.0/2.;
- gMC->Gsvolu("P012", "CONE", idtmed[851], conpar, 5);
- gMC->Gspos("P012", 1, "ZDC ", 0., 0., conpar[0] + zd1, 0, "ONLY");
-
- zd1 += conpar[0] * 2.;
-
- tubpar[0] = 39.8/2.;
- tubpar[1] = 40.0/2.;
- tubpar[2] = 100./2.;
- gMC->Gsvolu("P013", "TUBE", idtmed[851], tubpar, 3);
- gMC->Gspos("P013", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY");
-
- zd1 += tubpar[2] * 2.;
-
- tubpar[0] = 39.8/2.;
- tubpar[1] = 40.0/2.;
- tubpar[2] = 600./2.;
- gMC->Gsvolu("P014", "TUBE", idtmed[851], tubpar, 3);
- gMC->Gspos("P014", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY");
-
- zd1 += tubpar[2] * 2.;
-
- conpar[0] = 28.4/2.;
- conpar[1] = 39.8/2.;
- conpar[2] = 40.0/2.;
- conpar[3] = 49.8/2.;
- conpar[4] = 50.0/2.;
- gMC->Gsvolu("P015", "CONE", idtmed[851], conpar, 5);
- gMC->Gspos("P015", 1, "ZDC ", 0., 0., conpar[0] + zd1, 0, "ONLY");
-
- zd1 += conpar[0] * 2.;
-
- tubpar[0] = 49.8/2.;
- tubpar[1] = 50.0/2.;
- tubpar[2] = 100./2.;
- gMC->Gsvolu("P016", "TUBE", idtmed[851], tubpar, 3);
- gMC->Gspos("P016", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY");
-
- zd1 += tubpar[2] * 2.;
-
- tubpar[0] = 49.8/2.;
- tubpar[1] = 50.0/2.;
- tubpar[2] = 600./2.;
- gMC->Gsvolu("P017", "TUBE", idtmed[851], tubpar, 3);
- gMC->Gspos("P017", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY");
-
- zd1 += tubpar[2] * 2.;
-
- conpar[0] = 28.4/2.;
- conpar[1] = 49.8/2.;
- conpar[2] = 50.0/2.;
- conpar[3] = 59.8/2.;
- conpar[4] = 60.0/2.;
- gMC->Gsvolu("P018", "CONE", idtmed[851], conpar, 5);
- gMC->Gspos("P018", 1, "ZDC ", 0., 0., conpar[0] + zd1, 0, "ONLY");
-
- zd1 += conpar[0] * 2.;
-
- tubpar[0] = 59.8/2.;
- tubpar[1] = 60.0/2.;
- tubpar[2] = 50./2.;
- gMC->Gsvolu("P019", "TUBE", idtmed[851], tubpar, 3);
- gMC->Gspos("P019", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY");
-
- zd1 += tubpar[2] * 2.;
-
- tubpar[0] = 59.8/2.;
- tubpar[1] = 60.0/2.;
- tubpar[2] = 800./2.;
- gMC->Gsvolu("P020", "TUBE", idtmed[851], tubpar, 3);
- gMC->Gspos("P020", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY");
-
- zd1 += tubpar[2] * 2.;
-
- tubpar[0] = 0.;
- tubpar[1] = 60.0/2.;
- tubpar[2] = 0.2/2.;
- gMC->Gsvolu("P021", "TUBE", idtmed[851], tubpar, 3);
- gMC->Gspos("P021", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY");
-
- zd1 += tubpar[2] * 2.;
-
- tubpar[0] = 0.;
- tubpar[1] = 4.4/2.;
- tubpar[2] = 0.2/2.;
- gMC->Gsvolu("Q021", "TUBE", idtmed[889], tubpar, 3);
- tubpar[0] = 0.;
- tubpar[1] = 7.0/2.;
- tubpar[2] = 0.2/2.;
- gMC->Gsvolu("R021", "TUBE", idtmed[889], tubpar, 3);
- // -- POSITION Q021 INSIDE P021
- gMC->Gspos("Q021", 1, "P021", -7.7, 0., 0., 0, "ONLY");
- // -- POSITION R020 INSIDE P020
- gMC->Gspos("R021", 1, "P021", 7.7, 0., 0., 0, "ONLY");
-
- // -- BEAM PIPES BETWEEN END OF CONICAL PIPE AND BEGINNING OF D2
- tubpar[0] = 4.0/2.;
- tubpar[1] = 4.4/2.;
- tubpar[2] = 645.*0.5;
- gMC->Gsvolu("P022", "TUBE", idtmed[851], tubpar, 3);
- tubpar[0] = 7.0/2.;
- tubpar[1] = 7.4/2.;
- tubpar[2] = 645.*0.5;
- gMC->Gsvolu("P023", "TUBE", idtmed[851], tubpar, 3);
-
- // -- ROTATE PIPES
- AliMatrix(im1, 90.-0.071, 0., 90., 90., .071, 180.);
- angle = .071*kDegrad;
- gMC->Gspos("P022", 1, "ZDC ", TMath::Sin(angle) * 322.5 - 9.7 +
- TMath::Sin(angle) * 472.5, 0., tubpar[2] + zd1, im1, "ONLY");
- AliMatrix(im2, 90.+0.071, 0., 90., 90., .071, 0.);
- gMC->Gspos("P023", 1, "ZDC ", 9.7 - TMath::Sin(angle) * 322.5, 0.,
- tubpar[2] + zd1, im2, "ONLY");
-
- // -- END OF BEAM PIPE VOLUME DEFINITION. MAGNET DEFINITION FOLLOWS
- // (LHC OPTICS 6)
-
- // -- COMPENSATOR DIPOLE (MCBWA)
- // GAP (VACUUM WITH MAGNETIC FIELD)
-
- tubpar[0] = 0.;
- tubpar[1] = 4.5;
- tubpar[2] = 190./2.;
- gMC->Gsvolu("MCBW", "TUBE", idtmed[890], tubpar, 3);
- gMC->Gspos("MCBW", 1, "ZDC ", 0., 0., tubpar[2] + 1920., 0, "ONLY");
-
- // -- YOKE (IRON WITHOUT MAGNETIC FIELD)
-
- tubpar[0] = 4.5;
- tubpar[1] = 55.;
- tubpar[2] = 190./2.;
- gMC->Gsvolu("YMCB", "TUBE", idtmed[851], tubpar, 3);
- gMC->Gspos("YMCB", 1, "ZDC ", 0., 0., tubpar[2] + 1920., 0, "ONLY");
-
- // -- INNER TRIPLET
-
- zq = 2300.;
-
- // -- DEFINE MQXL AND MQX QUADRUPOLE ELEMENT
-
- // MQXL
- // -- GAP (VACUUM WITH MAGNETIC FIELD)
-
- tubpar[0] = 0.;
- tubpar[1] = 3.5;
- tubpar[2] = 630./2.;
- gMC->Gsvolu("MQXL", "TUBE", idtmed[890], tubpar, 3);
-
- // -- YOKE
-
- tubpar[0] = 3.5;
- tubpar[1] = 22.;
- tubpar[2] = 630./2.;
- gMC->Gsvolu("YMQL", "TUBE", idtmed[851], tubpar, 3);
-
- gMC->Gspos("MQXL", 1, "ZDC ", 0., 0., tubpar[2] + zq, 0, "ONLY");
- gMC->Gspos("YMQL", 1, "ZDC ", 0., 0., tubpar[2] + zq, 0, "ONLY");
-
- gMC->Gspos("MQXL", 2, "ZDC ", 0., 0., tubpar[2] + zq + 2430., 0, "ONLY");
- gMC->Gspos("YMQL", 2, "ZDC ", 0., 0., tubpar[2] + zq + 2430., 0, "ONLY");
-
- // -- MQX
- // -- GAP (VACUUM WITH MAGNETIC FIELD)
-
- tubpar[0] = 0.;
- tubpar[1] = 3.5;
- tubpar[2] = 550./2.;
- gMC->Gsvolu("MQX ", "TUBE", idtmed[890], tubpar, 3);
-
- // -- YOKE
-
- tubpar[0] = 3.5;
- tubpar[1] = 22.;
- tubpar[2] = 550./2.;
- gMC->Gsvolu("YMQ ", "TUBE", idtmed[851], tubpar, 3);
-
- gMC->Gspos("MQX ", 1, "ZDC ", 0., 0., tubpar[2] + zq + 880., 0, "ONLY");
- gMC->Gspos("YMQ ", 1, "ZDC ", 0., 0., tubpar[2] + zq + 880., 0, "ONLY");
-
- gMC->Gspos("MQX ", 2, "ZDC ", 0., 0., tubpar[2] + zq + 1530., 0, "ONLY");
- gMC->Gspos("YMQ ", 2, "ZDC ", 0., 0., tubpar[2] + zq + 1530., 0, "ONLY");
-
- // -- SEPARATOR DIPOLE D1
-
- zd1 = 5843.5;
-
- // -- GAP (VACUUM WITH MAGNETIC FIELD)
-
- tubpar[0] = 0.;
- tubpar[1] = 4.5;
- tubpar[2] = 945/2.;
- gMC->Gsvolu("D1 ", "TUBE", idtmed[890], tubpar, 3);
-
- // -- YOKE
-
- tubpar[0] = 0.;
- tubpar[1] = 55.;
- tubpar[2] = 945/2.;
- gMC->Gsvolu("YD1 ", "TUBE", idtmed[851], tubpar, 3);
-
- gMC->Gspos("YD1 ", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY");
- gMC->Gspos("D1 ", 1, "YD1 ", 0., 0., 0., 0, "ONLY");
-
- // -- DIPOLE D2
-
- zd2 = 12113.2;
-
- // -- GAP (VACUUM WITH MAGNETIC FIELD)
-
- tubpar[0] = 0.;
- tubpar[1] = 4.5;
- tubpar[2] = 945./2.;
- gMC->Gsvolu("D2 ", "TUBE", idtmed[890], tubpar, 3);
-
- // -- YOKE
-
- tubpar[0] = 0.;
- tubpar[1] = 55.;
- tubpar[2] = 945./2.;
- gMC->Gsvolu("YD2 ", "TUBE", idtmed[851], tubpar, 3);
-
- gMC->Gspos("YD2 ", 1, "ZDC ", 0., 0., tubpar[2] + zd2, 0, "ONLY");
-
- gMC->Gspos("D2 ", 1, "YD2 ", -9.7, 0., 0., 0, "ONLY");
- gMC->Gspos("D2 ", 2, "YD2 ", 9.7, 0., 0., 0, "ONLY");
-
- // -- END OF MAGNET DEFINITION
-
- // ----------------- Hadronic calorimeters -------------------- *
-
- // Neutron calorimeter
-
- gMC->Gsvolu("ZNEU", "BOX ", idtmed[800], HDZN, 3); // Passive material
- gMC->Gsvolu("ZNFI", "TUBE", idtmed[802], FIZN, 3); // Active material
- gMC->Gsvolu("ZNGR", "BOX ", idtmed[889], GRZN, 3); // Empty grooves
-
- // Divide ZNEU in towers
- // (for hits purposes)
-
- gMC->Gsdvn("ZNTX", "ZNEU", NZNTX, 1); // x-tower
- gMC->Gsdvn("ZN1 ", "ZNTX", NZNTY, 2); // y-tower
-
- // Divide ZNEU in minitowers
- // (NCEN(1)= NUMBER OF FIBERS PER TOWER ALONG X-AXIS,
- // NCEN(2)= NUMBER OF FIBERS PER TOWER ALONG Y-AXIS)
- // (one fiber per minitower)
-
- gMC->Gsdvn("ZNSL", "ZN1 ", NCEN[1], 2); // Slices
- gMC->Gsdvn("ZNST", "ZNSL", NCEN[0], 1); // Sticks
-
- // --- Position the empty grooves in the sticks
- gMC->Gspos("ZNGR", 1, "ZNST", 0., 0., 0., 0, "ONLY");
- // --- Position the fibers in the grooves
- gMC->Gspos("ZNFI", 1, "ZNGR", 0., 0., 0., 0, "ONLY");
- // --- Position the neutron calorimeter in ZDC
- gMC->Gspos("ZNEU", 1, "ZDC ", ZNPOS[0], ZNPOS[1], ZNPOS[2] + HDZN[2], 0, "ONLY");
-
- // Proton calorimeter
-
- gMC->Gsvolu("ZPRO", "BOX ", idtmed[801], HDZP, 3); // Passive material
- gMC->Gsvolu("ZPFI", "TUBE", idtmed[802], FIZP, 3); // Active material
- gMC->Gsvolu("ZPGR", "BOX ", idtmed[889], GRZP, 3); // Empty grooves
-
- // Divide ZPRO in towers
- // (for hits purposes)
-
- gMC->Gsdvn("ZPTX", "ZPRO", NZPTX, 1); // x-tower
- gMC->Gsdvn("ZP1 ", "ZPTX", NZPTY, 2); // y-tower
-
-
- // Divide ZPRO in minitowers
- // (NCEP[0]= NUMBER OF FIBERS ALONG X-AXIS PER MINITOWER,
- // NCEP[1]= NUMBER OF FIBERS ALONG Y-AXIS PER MINITOWER)
- // (one fiber per minitower)
-
- gMC->Gsdvn("ZPSL", "ZP1 ", NCEP[1], 2); // Slices
- gMC->Gsdvn("ZPST", "ZPSL", NCEP[0], 1); // Sticks
-
- // --- Position the empty grooves in the sticks
- gMC->Gspos("ZPGR", 1, "ZPST", 0., 0., 0., 0, "ONLY");
- // --- Position the fibers in the grooves
- gMC->Gspos("ZPFI", 1, "ZPGR", 0., 0., 0., 0, "ONLY");
- // --- Position the proton calorimeter in ZDC
- gMC->Gspos("ZPRO", 1, "ZDC ", ZPPOS[0], ZPPOS[1], ZPPOS[2] + HDZP[2], 0, "ONLY");
-
+
+ AliDetector::ResetDigits();
+// fNStHits = 0;
+// if(fStHits) fStHits->Clear();
}
-
+
//_____________________________________________________________________________
-void AliZDCv1::DrawModule()
+void AliZDC::BuildGeometry()
{
//
- // Draw a shaded view of the Zero Degree Calorimeter version 1
+ // Build the ROOT TNode geometry for event display
+ // in the Zero Degree Calorimeter
+ // This routine is dummy for the moment
//
- // Set everything unseen
- gMC->Gsatt("*", "seen", -1);
- //
- // Set ALIC mother transparent
- gMC->Gsatt("ALIC","SEEN",0);
- //
- // Set the volumes visible
- gMC->Gsatt("ZDC","SEEN",0);
- gMC->Gsatt("P001","SEEN",1);
- gMC->Gsatt("P002","SEEN",1);
- gMC->Gsatt("P003","SEEN",1);
- gMC->Gsatt("P004","SEEN",1);
- gMC->Gsatt("P005","SEEN",1);
- gMC->Gsatt("P006","SEEN",1);
- gMC->Gsatt("P007","SEEN",1);
- gMC->Gsatt("P008","SEEN",1);
- gMC->Gsatt("P009","SEEN",1);
- gMC->Gsatt("P010","SEEN",1);
- gMC->Gsatt("P011","SEEN",1);
- gMC->Gsatt("P012","SEEN",1);
- gMC->Gsatt("P013","SEEN",1);
- gMC->Gsatt("P014","SEEN",1);
- gMC->Gsatt("P015","SEEN",1);
- gMC->Gsatt("P016","SEEN",1);
- gMC->Gsatt("P017","SEEN",1);
- gMC->Gsatt("P018","SEEN",1);
- gMC->Gsatt("P019","SEEN",1);
- gMC->Gsatt("P020","SEEN",1);
- gMC->Gsatt("P021","SEEN",1);
- gMC->Gsatt("Q021","SEEN",1);
- gMC->Gsatt("R021","SEEN",1);
- gMC->Gsatt("P022","SEEN",1);
- gMC->Gsatt("P023","SEEN",1);
- gMC->Gsatt("D1 ","SEEN",1);
- gMC->Gsatt("YD1 ","SEEN",1);
- gMC->Gsatt("D2 ","SEEN",1);
- gMC->Gsatt("YD2 ","SEEN",1);
- gMC->Gsatt("MCBW","SEEN",1);
- gMC->Gsatt("YMCB","SEEN",1);
- gMC->Gsatt("MQXL","SEEN",1);
- gMC->Gsatt("YMQL","SEEN",1);
- gMC->Gsatt("MQX","SEEN",1);
- gMC->Gsatt("YMQ","SEEN",1);
- gMC->Gsatt("D1","SEEN",1);
- gMC->Gsatt("YD1","SEEN",1);
- gMC->Gsatt("D2","SEEN",1);
- gMC->Gsatt("YD2","SEEN",1);
- gMC->Gsatt("ZNEU","SEEN",0);
- gMC->Gsatt("ZNFI","SEEN",0);
- gMC->Gsatt("ZNGR","SEEN",0);
- gMC->Gsatt("ZNTX","SEEN",0);
- gMC->Gsatt("ZN1 ","COLO",2);
- gMC->Gsatt("ZN1 ","SEEN",1);
- gMC->Gsatt("ZNSL","SEEN",0);
- gMC->Gsatt("ZNST","SEEN",0);
- gMC->Gsatt("ZPRO","SEEN",0);
- gMC->Gsatt("ZPFI","SEEN",0);
- gMC->Gsatt("ZPGR","SEEN",0);
- gMC->Gsatt("ZPTX","SEEN",0);
- gMC->Gsatt("ZP1 ","SEEN",1);
- gMC->Gsatt("ZPSL","SEEN",0);
- gMC->Gsatt("ZPST","SEEN",0);
+ TNode *node, *top;
+ TBRIK *brik;
+ const int kColorZDC = kRed;
//
- gMC->Gdopt("hide", "on");
- gMC->Gdopt("shad", "on");
- gMC->Gsatt("*", "fill", 7);
- gMC->SetClipBox(".");
- gMC->SetClipBox("*", 0, 100, -100, 100, 12000, 16000);
- gMC->DefaultRange();
- gMC->Gdraw("alic", 40, 30, 0, 488, 220, .07, .07);
- gMC->Gdhead(1111, "Zero Degree Calorimeter Version 1");
- gMC->Gdman(18, 4, "MAN");
+ top=gAlice->GetGeometry()->GetNode("alice");
+
+ // ZDC
+ brik = new TBRIK("S_ZDC","ZDC box","void",300,300,5);
+ top->cd();
+ node = new TNode("ZDC","ZDC","S_ZDC",0,0,600,"");
+ node->SetLineColor(kColorZDC);
+ fNodes->Add(node);
}
//_____________________________________________________________________________
-void AliZDCv1::CreateMaterials()
+Int_t AliZDC::DistancetoPrimitive(Int_t , Int_t )
{
//
- // Create Materials for the Zero Degree Calorimeter
+ // Distance from the mouse to the Zero Degree Calorimeter
+ // Dummy routine
//
- // Origin : E. Scomparin
-
- Int_t *idtmed = fIdtmed->GetArray()-799;
-
- Float_t dens, ubuf[1], wmat[2];
- Int_t isvol_active;
- Float_t a[2];
- Int_t i;
- Float_t z[2], epsil=0.001, stmin=0.01;
- Int_t isvol;
- Float_t fieldm = gAlice->Field()->Max();
- Int_t inofld;
- Float_t deemax=-1;
- Float_t tmaxfd=gAlice->Field()->Max();
- Int_t isxfld = gAlice->Field()->Integ();
- Float_t stemax;
-
- // --- Store in UBUF r0 for nuclear radius calculation R=r0*A**1/3
-
- // --- Tungsten
- ubuf[0] = 1.11;
- AliMaterial(1, "TUNG", 183.85, 74., 19.3, .35, 10.3, ubuf, 1);
-
- // --- Brass (CuZn)
- dens = 8.48;
- a[0] = 63.546;
- a[1] = 65.39;
- z[0] = 29.;
- z[1] = 30.;
- wmat[0] = .63;
- wmat[1] = .37;
- AliMixture(2, "BRASS ", a, z, dens, 2, wmat);
-
- // --- SiO2
- dens = 2.64;
- a[0] = 28.086;
- a[1] = 15.9994;
- z[0] = 14.;
- z[1] = 8.;
- wmat[0] = 1.;
- wmat[1] = 2.;
- AliMixture(3, "SIO2 ", a, z, dens, -2, wmat);
-
- // --- Lead
- ubuf[0] = 1.12;
- AliMaterial(4, "LEAD", 207.19, 82., 11.35, .56, 18.5, ubuf, 1);
-
- // --- Copper
- ubuf[0] = 1.1;
- AliMaterial(5, "COPP", 63.54, 29., 8.96, 1.4, 0., ubuf, 1);
-
- // --- Tantalum
- ubuf[0] = 1.1;
- AliMaterial(6, "TANT", 180.95, 73., 16.65, .4, 11.9, ubuf, 1);
-
- // Steel still to be added
-
- // --- Iron
- ubuf[0] = 1.1;
- AliMaterial(52, "IRON", 55.85, 26., 7.87, 1.76, 0., ubuf, 1);
-
- // --- Vacuum (no magnetic field)
- AliMaterial(90, "VOID", 1e-16, 1e-16, 1e-16, 1e16, 1e16, ubuf,0);
-
- // --- Vacuum (magnetic field)
- AliMaterial(91, "VOIM", 1e-16, 1e-16, 1e-16, 1e16, 1e16, ubuf,0);
-
- // --- Air non magnetic
- AliMaterial(92, "Air $", 14.61, 7.3, .001205, 30420., 67500., ubuf, 0);
-
- // --- Definition of tracking media:
-
- // --- Tungsten = 801 ;
- // --- Brass = 802 ;
- // --- Fibers (SiO2) = 803 ;
- // --- Lead = 804 ;
- // --- Copper = 805 ;
- // --- Tantalum = 806 ;
- // --- Steel = 851 ;
- // --- Iron = 852 ;
- // --- Vacuum (no field) = 890
- // --- Vacuum (with field) = 891
- // --- Air (no field) = 892
-
-
- // --- Tracking media parameters
- epsil = .01;
- stemax = 1.;
- isvol = 0;
- isvol_active = 1;
- inofld = 0;
- fieldm = 0.;
-
- AliMedium(1, "ZW", 1, isvol_active, inofld, fieldm, tmaxfd, stemax, deemax, epsil, stmin);
- AliMedium(2, "ZBRASS", 2, isvol_active, inofld, fieldm, tmaxfd, stemax, deemax, epsil, stmin);
- AliMedium(3, "ZSIO2", 3, isvol_active, inofld, fieldm, tmaxfd, stemax, deemax, epsil, stmin);
- AliMedium(4, "ZLEAD", 4, isvol_active, inofld, fieldm, tmaxfd, stemax, deemax, epsil, stmin);
- AliMedium(5, "ZCOPP", 5, isvol_active, inofld, fieldm, tmaxfd, stemax, deemax, epsil, stmin);
- AliMedium(6, "ZTANT", 6, isvol_active, inofld, fieldm, tmaxfd, stemax, deemax, epsil, stmin);
- AliMedium(52, "ZIRON", 52, isvol, inofld, fieldm, tmaxfd, stemax, deemax, epsil, stmin);
- AliMedium(90, "ZVOID", 90, isvol, inofld, fieldm, tmaxfd, stemax, deemax, epsil, stmin);
- AliMedium(92, "Air", 92, 0, inofld, fieldm, tmaxfd, stemax,deemax, epsil, stmin);
-
- fieldm = 45.;
- // AliMedium(91, "ZVOIM", 91, isvol, isxfld, fieldm, tmaxfd, stemax, deemax, epsil, stmin);
- AliMedium(91, "ZVOIM", 91, isvol, isxfld, fieldm, tmaxfd, stemax, deemax, epsil, stmin);
-
- // Thresholds for showering in the ZDCs
-
- i = 801;
- gMC->Gstpar(idtmed[i-1], "CUTGAM", .01);
- gMC->Gstpar(idtmed[i-1], "CUTELE", .01);
- gMC->Gstpar(idtmed[i-1], "CUTNEU", .1);
- gMC->Gstpar(idtmed[i-1], "CUTHAD", .1);
- i = 802;
- gMC->Gstpar(idtmed[i-1], "CUTGAM", .01);
- gMC->Gstpar(idtmed[i-1], "CUTELE", .01);
- gMC->Gstpar(idtmed[i-1], "CUTNEU", .1);
- gMC->Gstpar(idtmed[i-1], "CUTHAD", .1);
-
- // Avoid too detailed showering along the beam line
-
- i = 852;
- gMC->Gstpar(idtmed[i-1], "CUTGAM", .1);
- gMC->Gstpar(idtmed[i-1], "CUTELE", .1);
- gMC->Gstpar(idtmed[i-1], "CUTNEU", 1.);
- gMC->Gstpar(idtmed[i-1], "CUTHAD", 1.);
-
- // Avoid interaction in fibers (only energy loss allowed)
- i = 803;
- gMC->Gstpar(idtmed[i-1], "DCAY", 0.);
- gMC->Gstpar(idtmed[i-1], "MULS", 0.);
- gMC->Gstpar(idtmed[i-1], "PFIS", 0.);
- gMC->Gstpar(idtmed[i-1], "MUNU", 0.);
- gMC->Gstpar(idtmed[i-1], "LOSS", 1.);
- gMC->Gstpar(idtmed[i-1], "PHOT", 0.);
- gMC->Gstpar(idtmed[i-1], "COMP", 0.);
- gMC->Gstpar(idtmed[i-1], "PAIR", 0.);
- gMC->Gstpar(idtmed[i-1], "BREM", 0.);
- gMC->Gstpar(idtmed[i-1], "DRAY", 0.);
- gMC->Gstpar(idtmed[i-1], "ANNI", 0.);
- gMC->Gstpar(idtmed[i-1], "HADR", 0.);
+ return 9999;
}
-
-ClassImp(AliZDChit)
-
+
//_____________________________________________________________________________
-AliZDChit::AliZDChit(Int_t shunt, Int_t track, Int_t *vol, Float_t *hits):
- AliHit(shunt, track)
+void AliZDC::StepManager()
{
//
- // Add a Zero Degree Calorimeter hit
+ // Routine called at every step in the Zero Degree Calorimeter
//
- Int_t i;
- for (i=0;i<4;i++) fVolume[i] = vol[i];
- fX=hits[0];
- fY=hits[1];
- fZ=hits[2];
- fEnergy=hits[3];
}
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff