#include "STEER/AliMagFCM.h"
#include "STRUCT/AliBODY.h"
#include "STRUCT/AliMAG.h"
-#include "STRUCT/AliABSOv0.h"
-#include "STRUCT/AliDIPOv2.h"
-#include "STRUCT/AliHALL.h"
+#include "STRUCT/AliABSOv3.h"
+#include "STRUCT/AliDIPOv3.h"
+#include "STRUCT/AliHALLv3.h"
#include "STRUCT/AliFRAMEv2.h"
-#include "STRUCT/AliSHILv2.h"
-#include "STRUCT/AliPIPEv0.h"
-#include "ITS/AliITSvPPRasymm.h"
+#include "STRUCT/AliSHILv3.h"
+#include "STRUCT/AliPIPEv3.h"
+#include "ITS/AliITSv11Hybrid.h"
#include "TPC/AliTPCv2.h"
-#include "TOF/AliTOFv5T0.h"
-#include "HMPID/AliHMPIDv1.h"
-#include "ZDC/AliZDCv1.h"
+#include "TOF/AliTOFv6T0.h"
+#include "HMPID/AliHMPIDv3.h"
+#include "ZDC/AliZDCv3.h"
#include "TRD/AliTRDv1.h"
#include "FMD/AliFMDv0.h"
#include "MUON/AliMUONv1.h"
#include "ACORDE/AliACORDEv1.h"
#endif
+enum PprGeo_t
+ {
+ kHoles, kNoHoles
+ };
+static PprGeo_t geo = kHoles;
+void LoadPythia();
+
void Config()
{
// gRandom->SetSeed(seed);
gRandom->SetSeed(12345);
cerr<<"Seed for random number generation= "<<seed<<endl;
-
+ // Load Pythia libraries
+ LoadPythia();
// libraries required by geant321
#if defined(__CINT__)
gSystem->Load("libgeant321");
//=======================================================================
// Create the output file
+ if(!AliCDBManager::Instance()->IsDefaultStorageSet()){
+ AliCDBManager::Instance()->SetDefaultStorage("local://$ALICE_ROOT");
+ AliCDBManager::Instance()->SetRun(0);
+ }
+
AliRunLoader* rl=0x0;
cout<<"Config.C: Creating Run Loader ..."<<endl;
rl->SetCompressionLevel(2);
rl->SetNumberOfEventsPerFile(3);
gAlice->SetRunLoader(rl);
+ // gAlice->SetGeometryFromFile("geometry.root");
+ // gAlice->SetGeometryFromCDB();
// Set the trigger configuration
gAlice->SetTriggerDescriptor("Pb-Pb");
if(iABSO) {
//=================== ABSO parameters ============================
- AliABSO *ABSO = new AliABSOv0("ABSO","Muon Absorber");
+ AliABSO *ABSO = new AliABSOv3("ABSO","Muon Absorber");
}
if(iDIPO) {
//=================== DIPO parameters ============================
- AliDIPO *DIPO = new AliDIPOv2("DIPO","Dipole version 2");
+ AliDIPO *DIPO = new AliDIPOv3("DIPO","Dipole version 3");
}
if(iHALL) {
//=================== HALL parameters ============================
- AliHALL *HALL = new AliHALL("HALL","Alice Hall");
+ AliHALL *HALL = new AliHALLv3("HALL","Alice Hall");
}
//=================== FRAME parameters ============================
AliFRAME *FRAME = new AliFRAMEv2("FRAME","Space Frame");
+ if (geo == kHoles) {
+ FRAME->SetHoles(1);
+ } else {
+ FRAME->SetHoles(0);
+ }
}
if(iSHIL) {
//=================== SHIL parameters ============================
- AliSHIL *SHIL = new AliSHILv2("SHIL","Shielding");
+ AliSHIL *SHIL = new AliSHILv3("SHIL","Shielding");
}
if(iPIPE) {
//=================== PIPE parameters ============================
- AliPIPE *PIPE = new AliPIPEv0("PIPE","Beam Pipe");
+ AliPIPE *PIPE = new AliPIPEv3("PIPE","Beam Pipe");
}
if(iITS) {
+ //=================== ITS parameters ============================
-//=================== ITS parameters ============================
- //
- // As the innermost detector in ALICE, the Inner Tracking System "impacts" on
- // almost all other detectors. This involves the fact that the ITS geometry
- // still has several options to be followed in parallel in order to determine
- // the best set-up which minimizes the induced background. All the geometries
- // available to date are described in the following. Read carefully the comments
- // and use the default version (the only one uncommented) unless you are making
- // comparisons and you know what you are doing. In this case just uncomment the
- // ITS geometry you want to use and run Aliroot.
- //
- // Detailed geometries:
- //
- //
- //AliITS *ITS = new AliITSv5symm("ITS","Updated ITS TDR detailed version with symmetric services");
- //
- //AliITS *ITS = new AliITSv5asymm("ITS","Updates ITS TDR detailed version with asymmetric services");
- //
- AliITSvPPRasymm *ITS = new AliITSvPPRasymm("ITS","New ITS PPR detailed version with asymmetric services");
- ITS->SetMinorVersion(2); // don't touch this parameter if you're not an ITS developer
- ITS->SetReadDet(kFALSE); // don't touch this parameter if you're not an ITS developer
- ITS->SetWriteDet("$ALICE_ROOT/ITS/ITSgeometry_vPPRasymm2.det"); // don't touch this parameter if you're not an ITS developer
- ITS->SetThicknessDet1(200.); // detector thickness on layer 1 must be in the range [150,300]
- ITS->SetThicknessDet2(200.); // detector thickness on layer 2 must be in the range [150,300]
- ITS->SetThicknessChip1(150.); // chip thickness on layer 1 must be in the range [100,300]
- ITS->SetThicknessChip2(150.); // chip thickness on layer 2 must be in the range [100,300]
- ITS->SetRails(1); // 1 --> rails in ; 0 --> rails out
- ITS->SetCoolingFluid(1); // 1 --> water ; 0 --> freon
- //
- // Coarse geometries (warning: no hits are produced with these coarse geometries and they unuseful
- // for reconstruction !):
- //
- //
- //AliITSvPPRcoarseasymm *ITS = new AliITSvPPRcoarseasymm("ITS","New ITS PPR coarse version with asymmetric services");
- //ITS->SetRails(1); // 1 --> rails in ; 0 --> rails out
- //ITS->SetSupportMaterial(0); // 0 --> Copper ; 1 --> Aluminum ; 2 --> Carbon
- //
- //AliITS *ITS = new AliITSvPPRcoarsesymm("ITS","New ITS PPR coarse version with symmetric services");
- //ITS->SetRails(1); // 1 --> rails in ; 0 --> rails out
- //ITS->SetSupportMaterial(0); // 0 --> Copper ; 1 --> Aluminum ; 2 --> Carbon
- //
- //
- //
- // Geant3 <-> EUCLID conversion
- // ============================
- //
- // SetEUCLID is a flag to output (=1) or not to output (=0) both geometry and
- // media to two ASCII files (called by default ITSgeometry.euc and
- // ITSgeometry.tme) in a format understandable to the CAD system EUCLID.
- // The default (=0) means that you dont want to use this facility.
- //
- ITS->SetEUCLID(0);
+ AliITS *ITS = new AliITSv11Hybrid("ITS","ITS v11Hybrid");
}
if(iTOF) {
//=================== TOF parameters ============================
- AliTOF *TOF = new AliTOFv5T0("TOF","normal TOF");
+ AliTOF *TOF = new AliTOFv6T0("TOF","normal TOF");
}
if(iHMPID) {
//=================== HMPID parameters ===========================
- AliHMPID *HMPID = new AliHMPIDv1("HMPID","normal HMPID");
+ AliHMPID *HMPID = new AliHMPIDv3("HMPID","normal HMPID");
}
if(iZDC) {
//=================== ZDC parameters ============================
- AliZDC *ZDC = new AliZDCv1("ZDC","normal ZDC");
+ AliZDC *ZDC = new AliZDCv3("ZDC","normal ZDC");
}
if(iACORDE) {
}
+
+
+void LoadPythia()
+{
+ // Load Pythia related libraries
+ gSystem->Load("liblhapdf.so"); // Parton density functions
+ gSystem->Load("libEGPythia6.so"); // TGenerator interface
+ gSystem->Load("libpythia6.so"); // Pythia
+ gSystem->Load("libAliPythia6.so"); // ALICE specific implementations
+}
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff