#include "STRUCT/AliPIPEv0.h"
#include "ITS/AliITSvPPRasymm.h"
#include "TPC/AliTPCv2.h"
-#include "TOF/AliTOFv4T0.h"
+#include "TOF/AliTOFv5T0.h"
#include "RICH/AliRICHv1.h"
#include "ZDC/AliZDCv1.h"
#include "TRD/AliTRDv1.h"
#include "FMD/AliFMDv0.h"
#include "MUON/AliMUONv1.h"
-#include "MUON/AliMUONSt1GeometryBuilder.h"
-#include "MUON/AliMUONSt2GeometryBuilder.h"
-#include "MUON/AliMUONSlatGeometryBuilder.h"
-#include "MUON/AliMUONTriggerGeometryBuilder.h"
#include "PHOS/AliPHOSv1.h"
#include "PMD/AliPMDv1.h"
#include "START/AliSTARTv1.h"
gSystem->Load("libgeant321");
#endif
- new TGeant3("C++ Interface to Geant3");
+ new TGeant3TGeo("C++ Interface to Geant3");
//=======================================================================
// Create the output file
cout<<"Config.C: Creating Run Loader ..."<<endl;
rl = AliRunLoader::Open("galice.root",
- AliConfig::fgkDefaultEventFolderName,
+ AliConfig::GetDefaultEventFolderName(),
"recreate");
if (rl == 0x0)
{
rl->SetNumberOfEventsPerFile(3);
gAlice->SetRunLoader(rl);
- //
+ // Set the trigger configuration
+ gAlice->SetTriggerDescriptor("Pb-Pb");
+ cout<<"Trigger configuration is set to Pb-Pb"<<endl;
+
+ //
// Set External decayer
AliDecayer* decayer = new AliDecayerPythia();
decayer->SetForceDecay(kAll);
ITS->SetWriteDet("$ALICE_ROOT/ITS/ITSgeometry_vPPRasymm2.det"); // don't touch this parameter if you're not an ITS developer
ITS->SetThicknessDet1(200.); // detector thickness on layer 1 must be in the range [150,300]
ITS->SetThicknessDet2(200.); // detector thickness on layer 2 must be in the range [150,300]
- ITS->SetThicknessChip1(200.); // chip thickness on layer 1 must be in the range [100,300]
- ITS->SetThicknessChip2(200.); // chip thickness on layer 2 must be in the range [100,300]
+ ITS->SetThicknessChip1(150.); // chip thickness on layer 1 must be in the range [100,300]
+ ITS->SetThicknessChip2(150.); // chip thickness on layer 2 must be in the range [100,300]
ITS->SetRails(1); // 1 --> rails in ; 0 --> rails out
ITS->SetCoolingFluid(1); // 1 --> water ; 0 --> freon
//
- //AliITSvPPRsymm *ITS = new AliITSvPPRsymm("ITS","New ITS PPR detailed version with symmetric services");
- //ITS->SetMinorVersion(2); // don't touch this parameter if you're not an ITS developer
- //ITS->SetReadDet(kFALSE); // don't touch this parameter if you're not an ITS developer
- //ITS->SetWriteDet("$ALICE_ROOT/ITS/ITSgeometry_vPPRsymm2.det"); // don't touch this parameter if you're not an ITS developer
- //ITS->SetThicknessDet1(300.); // detector thickness on layer 1 must be in the range [150,300]
- //ITS->SetThicknessDet2(300.); // detector thickness on layer 2 must be in the range [150,300]
- //ITS->SetThicknessChip1(300.); // chip thickness on layer 1 must be in the range [100,300]
- //ITS->SetThicknessChip2(300.); // chip thickness on layer 2 must be in the range [100,300]
- //ITS->SetRails(1); // 1 --> rails in ; 0 --> rails out
- //ITS->SetCoolingFluid(1); // 1 --> water ; 0 --> freon
- //
- //
// Coarse geometries (warning: no hits are produced with these coarse geometries and they unuseful
// for reconstruction !):
//
if(iTPC) {
- //============================ TPC parameters ================================
- // --- This allows the user to specify sectors for the SLOW (TPC geometry 2)
- // --- Simulator. SecAL (SecAU) <0 means that ALL lower (upper)
- // --- sectors are specified, any value other than that requires at least one
- // --- sector (lower or upper)to be specified!
- // --- Reminder: sectors 1-24 are lower sectors (1-12 -> z>0, 13-24 -> z<0)
- // --- sectors 25-72 are the upper ones (25-48 -> z>0, 49-72 -> z<0)
- // --- SecLows - number of lower sectors specified (up to 6)
- // --- SecUps - number of upper sectors specified (up to 12)
- // --- Sens - sensitive strips for the Slow Simulator !!!
- // --- This does NOT work if all S or L-sectors are specified, i.e.
- // --- if SecAL or SecAU < 0
- //
- //
- //-----------------------------------------------------------------------------
-
- // gROOT->LoadMacro("SetTPCParam.C");
- // AliTPCParam *param = SetTPCParam();
+ //============================ TPC parameters ===================
AliTPC *TPC = new AliTPCv2("TPC","Default");
- // All sectors included
- TPC->SetSecAL(-1);
- TPC->SetSecAU(-1);
-
}
if(iTOF) {
//=================== TOF parameters ============================
- AliTOF *TOF = new AliTOFv4T0("TOF","normal TOF");
+ AliTOF *TOF = new AliTOFv5T0("TOF","normal TOF");
}
if(iRICH) {
//=================== TRD parameters ============================
AliTRD *TRD = new AliTRDv1("TRD","TRD slow simulator");
-
- // Select the gas mixture (0: 97% Xe + 3% isobutane, 1: 90% Xe + 10% CO2)
- TRD->SetGasMix(1);
-
- // With hole in front of PHOS
- TRD->SetPHOShole();
- // With hole in front of RICH
- TRD->SetRICHhole();
- // Switch on TR
- AliTRDsim *TRDsim = TRD->CreateTR();
}
if(iFMD) {
if(iMUON) {
//=================== MUON parameters ===========================
AliMUON *MUON = new AliMUONv1("MUON","default");
- MUON->AddGeometryBuilder(new AliMUONSt1GeometryBuilder(MUON));
- MUON->AddGeometryBuilder(new AliMUONSt2GeometryBuilder(MUON));
- MUON->AddGeometryBuilder(new AliMUONSlatGeometryBuilder(MUON));
- MUON->AddGeometryBuilder(new AliMUONTriggerGeometryBuilder(MUON));
}
//=================== PHOS parameters ===========================
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff