Setting drift gas via AliTPC title to have Ne-CO2-N up to 2010, Ne-CO2 later

[u/mrichter/AliRoot.git] / macros / ConfigCharmPPR.C

diff --git a/macros/ConfigCharmPPR.C b/macros/ConfigCharmPPR.C
index f81081580014c223135f0e5281341c2581c75652..5f11eed72ef22a194b0fca69fd244c87b2bfd99a 100644 (file)
--- a/macros/ConfigCharmPPR.C
+++ b/macros/ConfigCharmPPR.C
@@ -19,11 +19,11 @@
 #include "STRUCT/AliFRAMEv2.h"
 #include "STRUCT/AliSHILv3.h"
 #include "STRUCT/AliPIPEv3.h"
-#include "ITS/AliITSvPPRasymm.h"
+#include "ITS/AliITSv11.h"
 #include "TPC/AliTPCv2.h"
 #include "TOF/AliTOFv6T0.h"
-#include "HMPID/AliHMPIDv2.h"
-#include "ZDC/AliZDCv1.h"
+#include "HMPID/AliHMPIDv3.h"
+#include "ZDC/AliZDCv3.h"
 #include "TRD/AliTRDv1.h"
 #include "FMD/AliFMDv0.h"
 #include "MUON/AliMUONv1.h"
@@ -33,6 +33,8 @@
 #include "ACORDE/AliACORDEv1.h"
 #endif
 
+void LoadPythia();
+
 void Config()
 {
  
@@ -46,7 +48,8 @@ void Config()
   //  gRandom->SetSeed(seed);
   gRandom->SetSeed(12345);
   cerr<<"Seed for random number generation= "<<seed<<endl; 
-
+  // Load Pythia libraries
+  LoadPythia();
    // libraries required by geant321
 #if defined(__CINT__)
     gSystem->Load("libgeant321");
@@ -55,7 +58,7 @@ void Config()
   new TGeant3TGeo("C++ Interface to Geant3");
 
   if(!AliCDBManager::Instance()->IsDefaultStorageSet()){
-    AliCDBManager::Instance()->SetDefaultStorage("local://$ALICE_ROOT");
+    AliCDBManager::Instance()->SetDefaultStorage("local://$ALICE_ROOT/OCDB");
     AliCDBManager::Instance()->SetRun(0);
   }
 
@@ -80,7 +83,7 @@ void Config()
   // gAlice->SetGeometryFromCDB();
 
   // Set the trigger configuration
-  gAlice->SetTriggerDescriptor("Pb-Pb");
+  AliSimulation::Instance()->SetTriggerConfig("Pb-Pb");
   cout<<"Trigger configuration is set to  Pb-Pb"<<endl;
 
   //
@@ -219,7 +222,7 @@ void Config()
     //=================== FRAME parameters ============================
 
     AliFRAME *FRAME  = new AliFRAMEv2("FRAME","Space Frame");
-
+    FRAME->SetHoles(1);
   }
 
   if(iSHIL) {
@@ -236,60 +239,11 @@ void Config()
   }
 
 
-  if(iITS) {
-
-//=================== ITS parameters ============================
-    //
-    // As the innermost detector in ALICE, the Inner Tracking System "impacts" on
-    // almost all other detectors. This involves the fact that the ITS geometry
-    // still has several options to be followed in parallel in order to determine
-    // the best set-up which minimizes the induced background. All the geometries
-    // available to date are described in the following. Read carefully the comments
-    // and use the default version (the only one uncommented) unless you are making
-    // comparisons and you know what you are doing. In this case just uncomment the
-    // ITS geometry you want to use and run Aliroot.
-    //
-    // Detailed geometries:         
-    //
-    //
-    //AliITS *ITS  = new AliITSv5symm("ITS","Updated ITS TDR detailed version with symmetric services");
-    //
-    //AliITS *ITS  = new AliITSv5asymm("ITS","Updates ITS TDR detailed version with asymmetric services");
-    //
-    AliITSvPPRasymm *ITS  = new AliITSvPPRasymm("ITS","New ITS PPR detailed version with asymmetric services");
-    ITS->SetMinorVersion(2);                                         // don't touch this parameter if you're not an ITS developer
-    ITS->SetReadDet(kFALSE);                                         // don't touch this parameter if you're not an ITS developer
-    ITS->SetWriteDet("$ALICE_ROOT/ITS/ITSgeometry_vPPRasymm2.det");  // don't touch this parameter if you're not an ITS developer
-    ITS->SetThicknessDet1(200.);   // detector thickness on layer 1 must be in the range [150,300]
-    ITS->SetThicknessDet2(200.);   // detector thickness on layer 2 must be in the range [150,300]
-    ITS->SetThicknessChip1(150.);  // chip thickness on layer 1 must be in the range [100,300]
-    ITS->SetThicknessChip2(150.);  // chip thickness on layer 2 must be in the range [100,300]
-    ITS->SetRails(1);             // 1 --> rails in ; 0 --> rails out
-    ITS->SetCoolingFluid(1);       // 1 --> water ; 0 --> freon
-    //
-    // Coarse geometries (warning: no hits are produced with these coarse geometries and they unuseful 
-    // for reconstruction !):
-    //                                                     
-    //
-    //AliITSvPPRcoarseasymm *ITS  = new AliITSvPPRcoarseasymm("ITS","New ITS PPR coarse version with asymmetric services");
-    //ITS->SetRails(1);                // 1 --> rails in ; 0 --> rails out
-    //ITS->SetSupportMaterial(0);      // 0 --> Copper ; 1 --> Aluminum ; 2 --> Carbon
-    //
-    //AliITS *ITS  = new AliITSvPPRcoarsesymm("ITS","New ITS PPR coarse version with symmetric services");
-    //ITS->SetRails(1);                // 1 --> rails in ; 0 --> rails out
-    //ITS->SetSupportMaterial(0);      // 0 --> Copper ; 1 --> Aluminum ; 2 --> Carbon
-    //                      
-    //
-    //
-    // Geant3 <-> EUCLID conversion
-    // ============================
-    //
-    // SetEUCLID is a flag to output (=1) or not to output (=0) both geometry and
-    // media to two ASCII files (called by default ITSgeometry.euc and
-    // ITSgeometry.tme) in a format understandable to the CAD system EUCLID.
-    // The default (=0) means that you dont want to use this facility.
-    //
-    ITS->SetEUCLID(0);  
+  if (iITS)
+  {
+    //=================== ITS parameters ============================
+
+    AliITS *ITS  = new AliITSv11("ITS","ITS v11");
   }
   
 
@@ -306,7 +260,7 @@ void Config()
 
   if(iHMPID) {
     //=================== HMPID parameters ===========================
-    AliHMPID *HMPID  = new AliHMPIDv2("HMPID","normal HMPID");    
+    AliHMPID *HMPID  = new AliHMPIDv3("HMPID","normal HMPID");    
 
   }
 
@@ -314,7 +268,7 @@ void Config()
   if(iZDC) {
     //=================== ZDC parameters ============================
 
-    AliZDC *ZDC  = new AliZDCv1("ZDC","normal ZDC");
+    AliZDC *ZDC  = new AliZDCv3("ZDC","normal ZDC");
   }
 
   if(iACORDE) {
@@ -372,3 +326,12 @@ void Config()
 
          
 }
+
+void LoadPythia()
+{
+    // Load Pythia related libraries
+    gSystem->Load("liblhapdf.so");      // Parton density functions
+    gSystem->Load("libEGPythia6.so");   // TGenerator interface
+    gSystem->Load("libpythia6.so");     // Pythia
+    gSystem->Load("libAliPythia6.so");  // ALICE specific implementations
+}