+// One can use the configuration macro in compiled mode by
+// root [0] gSystem->Load("libgeant321");
+// root [0] gSystem->SetIncludePath("-I$ROOTSYS/include -I$ALICE_ROOT/include\
+// -I$ALICE_ROOT -I$ALICE/geant3/TGeant3");
+// root [0] .x grun.C(1,"ConfigHBT.C++")
+
+#if !defined(__CINT__) || defined(__MAKECINT__)
+#include <Riostream.h>
+#include <TRandom.h>
+#include <TSystem.h>
+#include <TVirtualMC.h>
+#include <TGeant3.h>
+#include "STEER/AliRunLoader.h"
+#include "STEER/AliRun.h"
+#include "STEER/AliConfig.h"
+#include "PYTHIA6/AliDecayerPythia.h"
+#include "EVGEN/AliGenCocktailAfterBurner.h"
+#include "TMEVSIM/AliMevSimConfig.h"
+#include "TMEVSIM/AliMevSimParticle.h"
+#include "TMEVSIM/AliGenMevSim.h"
+#include "THbtp/AliGenHBTprocessor.h"
+#include "STRUCT/AliBODY.h"
+#include "STRUCT/AliMAG.h"
+#include "STRUCT/AliABSOv0.h"
+#include "STRUCT/AliDIPOv2.h"
+#include "STRUCT/AliHALL.h"
+#include "STRUCT/AliFRAMEv2.h"
+#include "STRUCT/AliSHILv2.h"
+#include "STRUCT/AliPIPEv0.h"
+#include "ITS/AliITSvPPRasymmFMD.h"
+#include "TPC/AliTPCv2.h"
+#include "TOF/AliTOFv4T0.h"
+#include "RICH/AliRICHv1.h"
+#include "ZDC/AliZDCv1.h"
+#include "TRD/AliTRDv1.h"
+#include "FMD/AliFMDv1.h"
+#include "MUON/AliMUONv1.h"
+#include "MUON/AliMUONSt1GeometryBuilder.h"
+#include "MUON/AliMUONSt2GeometryBuilder.h"
+#include "MUON/AliMUONSlatGeometryBuilder.h"
+#include "MUON/AliMUONTriggerGeometryBuilder.h"
+#include "PHOS/AliPHOSv1.h"
+#include "PMD/AliPMDv1.h"
+#include "START/AliSTARTv1.h"
+#include "EMCAL/AliEMCALv1.h"
+#include "CRT/AliCRTv1.h"
+#endif
+
void Config()
{
// Set Random Number seed
// gRandom->SetSeed(12345);
- new TGeant3("C++ Interface to Geant3");
-
- if (!gSystem->Getenv("CONFIG_FILE"))
- {
- TFile *rootfile = new TFile("galice.root", "recreate");
+ // libraries required by geant321
+#if defined(__CINT__)
+ gSystem->Load("libgeant321");
+#endif
- rootfile->SetCompressionLevel(2);
- }
+ new TGeant3("C++ Interface to Geant3");
- TGeant3 *geant3 = (TGeant3 *) gMC;
+ cout<<"Config.C: Creating Run Loader ..."<<endl;
+ AliRunLoader* rl = AliRunLoader::Open("galice.root",AliConfig::GetDefaultEventFolderName(),
+ "recreate");
+ if (rl == 0x0)
+ {
+ gAlice->Fatal("Config.C","Can not instatiate the Run Loader");
+ return;
+ }
+ rl->SetCompressionLevel(2);
+ rl->SetNumberOfEventsPerFile(6);
+ gAlice->SetRunLoader(rl);
//
// Set External decayer
decayer->Init();
gMC->SetExternalDecayer(decayer);
//
- //
//=======================================================================
- // ******* GEANT STEERING parameters FOR ALICE SIMULATION *******
- geant3->SetTRIG(1); //Number of events to be processed
- geant3->SetSWIT(4, 10);
- geant3->SetDEBU(0, 0, 1);
- //geant3->SetSWIT(2,2);
- geant3->SetDCAY(1);
- geant3->SetPAIR(1);
- geant3->SetCOMP(1);
- geant3->SetPHOT(1);
- geant3->SetPFIS(0);
- geant3->SetDRAY(0);
- geant3->SetANNI(1);
- geant3->SetBREM(1);
- geant3->SetMUNU(1);
- geant3->SetCKOV(1);
- geant3->SetHADR(1); //Select pure GEANH (HADR 1) or GEANH/NUCRIN (HADR 3)
- geant3->SetLOSS(2);
- geant3->SetMULS(1);
- geant3->SetRAYL(1);
- geant3->SetAUTO(1); //Select automatic STMIN etc... calc. (AUTO 1) or manual (AUTO 0)
- geant3->SetABAN(0); //Restore 3.16 behaviour for abandoned tracks
- geant3->SetOPTI(2); //Select optimisation level for GEANT geometry searches (0,1,2)
- geant3->SetERAN(5.e-7);
+ // ************* STEERING parameters FOR ALICE SIMULATION **************
+ // --- Specify event type to be tracked through the ALICE setup
+ // --- All positions are in cm, angles in degrees, and P and E in GeV
+
+
+
+ gMC->SetProcess("DCAY",1);
+ gMC->SetProcess("PAIR",1);
+ gMC->SetProcess("COMP",1);
+ gMC->SetProcess("PHOT",1);
+ gMC->SetProcess("PFIS",0);
+ gMC->SetProcess("DRAY",0);
+ gMC->SetProcess("ANNI",1);
+ gMC->SetProcess("BREM",1);
+ gMC->SetProcess("MUNU",1);
+ gMC->SetProcess("CKOV",1);
+ gMC->SetProcess("HADR",1);
+ gMC->SetProcess("LOSS",2);
+ gMC->SetProcess("MULS",1);
+ gMC->SetProcess("RAYL",1);
Float_t cut = 1.e-3; // 1MeV cut by default
Float_t tofmax = 1.e10;
- // GAM ELEC NHAD CHAD MUON EBREM MUHAB EDEL MUDEL MUPA TOFMAX
- geant3->SetCUTS(cut, cut, cut, cut, cut, cut, cut, cut, cut, cut,
- tofmax);
- //
- //=======================================================================
- // ************* STEERING parameters FOR ALICE SIMULATION **************
- // --- Specify event type to be tracked through the ALICE setup
- // --- All positions are in cm, angles in degrees, and P and E in GeV
+ gMC->SetCut("CUTGAM", cut);
+ gMC->SetCut("CUTELE", cut);
+ gMC->SetCut("CUTNEU", cut);
+ gMC->SetCut("CUTHAD", cut);
+ gMC->SetCut("CUTMUO", cut);
+ gMC->SetCut("BCUTE", cut);
+ gMC->SetCut("BCUTM", cut);
+ gMC->SetCut("DCUTE", cut);
+ gMC->SetCut("DCUTM", cut);
+ gMC->SetCut("PPCUTM", cut);
+ gMC->SetCut("TOFMAX", tofmax);
+
+
if (gSystem->Getenv("CONFIG_NPARTICLES"))
{
int nParticles = atoi(gSystem->Getenv("CONFIG_NPARTICLES"));
g3->SetSigma(0.0, 0.0, 0.0);
//g3->SetEtaCutRange(-4,4);
- AliMevSimParticle *piPlus = new AliMevSimParticle(kPiPlus, 3000, 3, 0.2, 0.01, 3, 0.1, 0.0, 0.0);
- AliMevSimParticle *piMinus = new AliMevSimParticle(kPiMinus, 3000, 3, 0.2, 0.01, 3, 0.1, 0.0, 0.0);
+ AliMevSimParticle *piPlus = new AliMevSimParticle(kPiPlus, 100, 3, 0.2, 0.01, 3, 0.1, 0.0, 0.0);
+ AliMevSimParticle *piMinus = new AliMevSimParticle(kPiMinus, 100, 3, 0.2, 0.01, 3, 0.1, 0.0, 0.0);
//AliMevSimParticle *KPlus = new AliMevSimParticle(kKPlus, 10, 0, 0.25, 0.0, 2, 0.15, 0.0, 0.0 );
//AliMevSimParticle *KMinus = new AliMevSimParticle(kKMinus, 10, 0, 0.25, 0.0, 2, 0.15, 0.0, 0.0 );
//AliMevSimParticle *protonPlus = new AliMevSimParticle(kProton, 3, 0, 0.4, 0.0, 2, 0.15, 0.0, 0.0);
hbtp->SetRefControl(2);
hbtp->SetSwitch1D(1);
hbtp->SetSwitch3D(1);
- hbtp->SetSwitchCoulomb(0);
+ hbtp->SetSwitchCoulomb(1);
hbtp->SetSwitchCoherence(0);
- hbtp->SetSwitchFermiBose(1);
+ hbtp->SetSwitchFermiBose(-1);
hbtp->SetDeltap(0.1);
hbtp->SetDelChi(0.1);
hbtp->SetLambda(0.5);
hbtp->SetPtRange(0.1,0.98);
hbtp->SetPIDs(211,-211); //pi+ pi-
hbtp->SetSwitchType(3); // fit both the like and unlike pair correl
-
+ hbtp->SetMaxIterations(300);
/***********************************************************************************/
// gener->AddGenerator(g2,"HIJING PARAMETRIZATION",1);
//
//AliITS *ITS = new AliITSv5asymm("ITS","Updates ITS TDR detailed version with asymmetric services");
//
- AliITSvPPRasymm *ITS = new AliITSvPPRasymm("ITS","New ITS PPR detailed version with asymmetric services");
- ITS->SetMinorVersion(2); // don't touch this parameter if you're not an ITS developer
- ITS->SetReadDet(kFALSE); // don't touch this parameter if you're not an ITS developer
+ AliITSvPPRasymmFMD *ITS = new AliITSvPPRasymmFMD("ITS","New ITS PPR detailed version with asymmetric services");
+ ITS->SetMinorVersion(2); // don't touch this parameter if you're not an ITS developer
+ ITS->SetReadDet(kTRUE); // don't touch this parameter if you're not an ITS developer
// ITS->SetWriteDet("$ALICE_ROOT/ITS/ITSgeometry_vPPRasymm2.det"); // don't touch this parameter if you're not an ITS developer
ITS->SetThicknessDet1(200.); // detector thickness on layer 1 must be in the range [100,300]
ITS->SetThicknessDet2(200.); // detector thickness on layer 2 must be in the range [100,300]
if (iTOF)
{
//=================== TOF parameters ============================
- AliTOF *TOF = new AliTOFv2("TOF", "normal TOF");
+ AliTOF *TOF = new AliTOFv4T0("TOF", "normal TOF");
}
if (iRICH)
//=================== MUON parameters ===========================
AliMUON *MUON = new AliMUONv1("MUON", "default");
+ MUON->AddGeometryBuilder(new AliMUONSt1GeometryBuilder(MUON));
+ MUON->AddGeometryBuilder(new AliMUONSt2GeometryBuilder(MUON));
+ MUON->AddGeometryBuilder(new AliMUONSlatGeometryBuilder(MUON));
+ MUON->AddGeometryBuilder(new AliMUONTriggerGeometryBuilder(MUON));
}
//=================== PHOS parameters ===========================
if (iEMCAL && !iRICH)
{
//=================== EMCAL parameters ============================
- AliEMCAL *EMCAL = new AliEMCALv1("EMCAL", "EMCALArch1a");
+ AliEMCAL *EMCAL = new AliEMCALv1("EMCAL", "EMCAL_55_25");
}
if (iSTART)
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff