+// One can use the configuration macro in compiled mode by
+// root [0] gSystem->Load("libgeant321");
+// root [0] gSystem->SetIncludePath("-I$ROOTSYS/include -I$ALICE_ROOT/include\
+// -I$ALICE_ROOT -I$ALICE/geant3/TGeant3");
+// root [0] .x grun.C(1,"ConfigPPR.C++")
+
+#if !defined(__CINT__) || defined(__MAKECINT__)
+#include <Riostream.h>
+#include <TRandom.h>
+#include <TSystem.h>
+#include <TVirtualMC.h>
+#include <TGeant3.h>
+#include "STEER/AliRunLoader.h"
+#include "STEER/AliRun.h"
+#include "STEER/AliConfig.h"
+#include "STEER/AliGenerator.h"
+#include "PYTHIA6/AliDecayerPythia.h"
+#include "EVGEN/AliGenHIJINGpara.h"
+#include "THijing/AliGenHijing.h"
+#include "EVGEN/AliGenCocktail.h"
+#include "EVGEN/AliGenSlowNucleons.h"
+#include "EVGEN/AliSlowNucleonModelExp.h"
+#include "EVGEN/AliGenParam.h"
+#include "EVGEN/AliGenGSIlib.h"
+#include "PYTHIA6/AliGenPythia.h"
+#include "STEER/AliMagFMaps.h"
+#include "STRUCT/AliBODY.h"
+#include "STRUCT/AliMAG.h"
+#include "STRUCT/AliABSOv0.h"
+#include "STRUCT/AliDIPOv2.h"
+#include "STRUCT/AliHALL.h"
+#include "STRUCT/AliFRAMEv2.h"
+#include "STRUCT/AliSHILv2.h"
+#include "STRUCT/AliPIPEv0.h"
+#include "ITS/AliITSvPPRasymmFMD.h"
+#include "TPC/AliTPCv2.h"
+#include "TOF/AliTOFv4T0.h"
+#include "RICH/AliRICHv1.h"
+#include "ZDC/AliZDCv2.h"
+#include "TRD/AliTRDv1.h"
+#include "FMD/AliFMDv1.h"
+#include "MUON/AliMUONv1.h"
+#include "MUON/AliMUONSt1GeometryBuilder.h"
+#include "MUON/AliMUONSt2GeometryBuilder.h"
+#include "MUON/AliMUONSlatGeometryBuilder.h"
+#include "MUON/AliMUONTriggerGeometryBuilder.h"
+#include "PHOS/AliPHOSv1.h"
+#include "PMD/AliPMDv1.h"
+#include "START/AliSTARTv1.h"
+#include "EMCAL/AliEMCALv1.h"
+#include "CRT/AliCRTv0.h"
+#include "VZERO/AliVZEROv2.h"
+#endif
+
enum PprRun_t
{
test50,
kHijing_per1, kHijing_per2, kHijing_per3, kHijing_per4, kHijing_per5,
kHijing_jj25, kHijing_jj50, kHijing_jj75, kHijing_jj100, kHijing_jj200,
kHijing_gj25, kHijing_gj50, kHijing_gj75, kHijing_gj100, kHijing_gj200,
- kHijing_pA
+ kHijing_pA, kPythia6,
+ kPythia6Jets20_24, kPythia6Jets24_29, kPythia6Jets29_35,
+ kPythia6Jets35_42, kPythia6Jets42_50, kPythia6Jets50_60,
+ kPythia6Jets60_72, kPythia6Jets72_86, kPythia6Jets86_104,
+ kPythia6Jets104_125, kPythia6Jets125_150, kPythia6Jets150_180,
+ kD0PbPb5500, kD_TRD, kB_TRD, kJpsi_TRD,
+ kU_TRD, kPyJJ, kPyGJ, kRunMax
+};
+
+const char* pprRunName[kRunMax] = {
+ "test50",
+ "kParam_8000", "kParam_4000", "kParam_2000",
+ "kHijing_cent1", "kHijing_cent2",
+ "kHijing_per1", "kHijing_per2", "kHijing_per3", "kHijing_per4",
+ "kHijing_per5",
+ "kHijing_jj25", "kHijing_jj50", "kHijing_jj75", "kHijing_jj100",
+ "kHijing_jj200",
+ "kHijing_gj25", "kHijing_gj50", "kHijing_gj75", "kHijing_gj100",
+ "kHijing_gj200", "kHijing_pA", "kPythia6",
+ "kPythia6Jets20_24", "kPythia6Jets24_29", "kPythia6Jets29_35",
+ "kPythia6Jets35_42", "kPythia6Jets42_50", "kPythia6Jets50_60",
+ "kPythia6Jets60_72", "kPythia6Jets72_86", "kPythia6Jets86_104",
+ "kPythia6Jets104_125", "kPythia6Jets125_150", "kPythia6Jets150_180",
+ "kD0PbPb5500", "kD_TRD",
+ "kB_TRD", "kJpsi_TRD",
+ "kU_TRD", "kPyJJ", "kPyGJ"
};
enum PprGeo_t
// This part for configuration
-static PprRun_t run = test50;
-static PprGeo_t geo = kHoles;
-static PprRad_t rad = kGluonRadiation;
-static PprMag_t mag = k4kG;
+//static PprRun_t srun = test50;
+static PprRun_t srun = kPythia6;
+static PprGeo_t sgeo = kHoles;
+static PprRad_t srad = kGluonRadiation;
+static PprMag_t smag = k5kG;
+static Int_t sseed = 12345; //Set 0 to use the current time
// Comment line
static TString comment;
-
+// Functions
+Float_t EtaToTheta(Float_t arg);
+AliGenerator* GeneratorFactory(PprRun_t srun);
+AliGenHijing* HijingStandard();
+void ProcessEnvironmentVars();
void Config()
{
-
- // 7-DEC-2000 09:00
- // Switch on Transition adiation simulation. 6/12/00 18:00
- // iZDC=1 7/12/00 09:00
// ThetaRange is (0., 180.). It was (0.28,179.72) 7/12/00 09:00
// Theta range given through pseudorapidity limits 22/6/2001
+ // Get settings from environment variables
+ ProcessEnvironmentVars();
+
// Set Random Number seed
- // gRandom->SetSeed(12345);
+ gRandom->SetSeed(sseed);
+ cout<<"Seed for random number generation= "<<gRandom->GetSeed()<<endl;
- // libraries required by geant321
- gSystem->Load("libgeant321");
- new TGeant3("C++ Interface to Geant3");
+ // libraries required by geant321
+#if defined(__CINT__)
+ gSystem->Load("libgeant321");
+#endif
- if (!gSystem->Getenv("CONFIG_FILE"))
- {
- TFile *rootfile = new TFile("galice.root", "recreate");
+ new TGeant3("C++ Interface to Geant3");
- rootfile->SetCompressionLevel(2);
- }
+ AliRunLoader* rl=0x0;
- TGeant3 *geant3 = (TGeant3 *) gMC;
+ cout<<"Config.C: Creating Run Loader ..."<<endl;
+ rl = AliRunLoader::Open("galice.root",
+ AliConfig::fgkDefaultEventFolderName,
+ "recreate");
+ if (rl == 0x0)
+ {
+ gAlice->Fatal("Config.C","Can not instatiate the Run Loader");
+ return;
+ }
+ rl->SetCompressionLevel(2);
+ rl->SetNumberOfEventsPerFile(3);
+ gAlice->SetRunLoader(rl);
//
// Set External decayer
//
//
//=======================================================================
- // ******* GEANT STEERING parameters FOR ALICE SIMULATION *******
- geant3->SetTRIG(1); //Number of events to be processed
- geant3->SetSWIT(4, 10);
- geant3->SetDEBU(0, 0, 1);
- //geant3->SetSWIT(2,2);
- geant3->SetDCAY(1);
- geant3->SetPAIR(1);
- geant3->SetCOMP(1);
- geant3->SetPHOT(1);
- geant3->SetPFIS(0);
- geant3->SetDRAY(0);
- geant3->SetANNI(1);
- geant3->SetBREM(1);
- geant3->SetMUNU(1);
- geant3->SetCKOV(1);
- geant3->SetHADR(1); //Select pure GEANH (HADR 1) or GEANH/NUCRIN (HADR 3)
- geant3->SetLOSS(2);
- geant3->SetMULS(1);
- geant3->SetRAYL(1);
- geant3->SetAUTO(1); //Select automatic STMIN etc... calc. (AUTO 1) or manual (AUTO 0)
- geant3->SetABAN(0); //Restore 3.16 behaviour for abandoned tracks
- geant3->SetOPTI(2); //Select optimisation level for GEANT geometry searches (0,1,2)
- geant3->SetERAN(5.e-7);
-
- Float_t cut = 1.e-3; // 1MeV cut by default
- Float_t tofmax = 1.e10;
-
- // GAM ELEC NHAD CHAD MUON EBREM MUHAB EDEL MUDEL MUPA TOFMAX
- geant3->SetCUTS(cut, cut, cut, cut, cut, cut, cut, cut, cut, cut,
- tofmax);
//
//=======================================================================
// ************* STEERING parameters FOR ALICE SIMULATION **************
// --- Specify event type to be tracked through the ALICE setup
// --- All positions are in cm, angles in degrees, and P and E in GeV
+ gMC->SetProcess("DCAY",1);
+ gMC->SetProcess("PAIR",1);
+ gMC->SetProcess("COMP",1);
+ gMC->SetProcess("PHOT",1);
+ gMC->SetProcess("PFIS",0);
+ gMC->SetProcess("DRAY",0);
+ gMC->SetProcess("ANNI",1);
+ gMC->SetProcess("BREM",1);
+ gMC->SetProcess("MUNU",1);
+ gMC->SetProcess("CKOV",1);
+ gMC->SetProcess("HADR",1);
+ gMC->SetProcess("LOSS",2);
+ gMC->SetProcess("MULS",1);
+ gMC->SetProcess("RAYL",1);
+
+ Float_t cut = 1.e-3; // 1MeV cut by default
+ Float_t tofmax = 1.e10;
+
+ gMC->SetCut("CUTGAM", cut);
+ gMC->SetCut("CUTELE", cut);
+ gMC->SetCut("CUTNEU", cut);
+ gMC->SetCut("CUTHAD", cut);
+ gMC->SetCut("CUTMUO", cut);
+ gMC->SetCut("BCUTE", cut);
+ gMC->SetCut("BCUTM", cut);
+ gMC->SetCut("DCUTE", cut);
+ gMC->SetCut("DCUTM", cut);
+ gMC->SetCut("PPCUTM", cut);
+ gMC->SetCut("TOFMAX", tofmax);
+
// Generator Configuration
- gAlice->SetDebug(1);
- AliGenerator* gener = GeneratorFactory(run);
+ gAlice->SetDebug(0);
+ AliGenerator* gener = GeneratorFactory(srun);
gener->SetOrigin(0, 0, 0); // vertex position
gener->SetSigma(0, 0, 5.3); // Sigma in (X,Y,Z) (cm) on IP position
gener->SetCutVertexZ(1.); // Truncate at 1 sigma
gener->SetTrackingFlag(1);
gener->Init();
- if (mag == k2kG) {
+ if (smag == k2kG) {
comment = comment.Append(" | L3 field 0.2 T");
- } else if (mag == k4kG) {
+ } else if (smag == k4kG) {
comment = comment.Append(" | L3 field 0.4 T");
- } else if (mag == k5kG) {
+ } else if (smag == k5kG) {
comment = comment.Append(" | L3 field 0.5 T");
}
- if (rad == kGluonRadiation)
+ if (srad == kGluonRadiation)
{
comment = comment.Append(" | Gluon Radiation On");
comment = comment.Append(" | Gluon Radiation Off");
}
- if (geo == kHoles)
+ if (sgeo == kHoles)
{
comment = comment.Append(" | Holes for PHOS/RICH");
comment = comment.Append(" | No holes for PHOS/RICH");
}
- printf("\n \n Comment: %s \n \n", (char*) comment);
+ printf("\n \n Comment: %s \n \n", comment.Data());
// Field (L3 0.4 T)
- AliMagFMaps* field = new AliMagFMaps("Maps","Maps", 2, 1., 10., mag);
- rootfile->cd();
+ AliMagFMaps* field = new AliMagFMaps("Maps","Maps", 2, 1., 10., smag);
+ field->SetL3ConstField(0); //Using const. field in the barrel
+ rl->CdGAFile();
gAlice->SetField(field);
-
//
Int_t iABSO = 1;
Int_t iDIPO = 1;
//=================== FRAME parameters ============================
AliFRAMEv2 *FRAME = new AliFRAMEv2("FRAME", "Space Frame");
- if (geo == kHoles) {
+ if (sgeo == kHoles) {
FRAME->SetHoles(1);
} else {
FRAME->SetHoles(0);
//
//AliITS *ITS = new AliITSv5asymm("ITS","Updates ITS TDR detailed version with asymmetric services");
//
- AliITSvPPRasymm *ITS = new AliITSvPPRasymm("ITS","New ITS PPR detailed version with asymmetric services");
- ITS->SetMinorVersion(2); // don't touch this parameter if you're not an ITS developer
- ITS->SetReadDet(kFALSE); // don't touch this parameter if you're not an ITS developer
+ AliITSvPPRasymmFMD *ITS = new AliITSvPPRasymmFMD("ITS","New ITS PPR detailed version with asymmetric services");
+ ITS->SetMinorVersion(2); // don't touch this parameter if you're not an ITS developer
+ ITS->SetReadDet(kTRUE); // don't touch this parameter if you're not an ITS developer
// ITS->SetWriteDet("$ALICE_ROOT/ITS/ITSgeometry_vPPRasymm2.det"); // don't touch this parameter if you're not an ITS developer
ITS->SetThicknessDet1(200.); // detector thickness on layer 1 must be in the range [100,300]
ITS->SetThicknessDet2(200.); // detector thickness on layer 2 must be in the range [100,300]
ITS->SetThicknessChip2(200.); // chip thickness on layer 2 must be in the range [150,300]
ITS->SetRails(0); // 1 --> rails in ; 0 --> rails out
ITS->SetCoolingFluid(1); // 1 --> water ; 0 --> freon
- //
- //AliITSvPPRsymm *ITS = new AliITSvPPRsymm("ITS","New ITS PPR detailed version with symmetric services");
- //ITS->SetMinorVersion(2); // don't touch this parameter if you're not an ITS developer
- //ITS->SetReadDet(kFALSE); // don't touch this parameter if you're not an ITS developer
- //ITS->SetWriteDet("$ALICE_ROOT/ITS/ITSgeometry_vPPRsymm2.det"); // don't touch this parameter if you're not an ITS developer
- //ITS->SetThicknessDet1(200.); // detector thickness on layer 1 must be in the range [100,300]
- //ITS->SetThicknessDet2(200.); // detector thickness on layer 2 must be in the range [100,300]
- //ITS->SetThicknessChip1(200.); // chip thickness on layer 1 must be in the range [150,300]
- //ITS->SetThicknessChip2(200.); // chip thickness on layer 2 must be in the range [150,300]
- //ITS->SetRails(0); // 1 --> rails in ; 0 --> rails out
- //ITS->SetCoolingFluid(1); // 1 --> water ; 0 --> freon
- //
- //
+
// Coarse geometries (warning: no hits are produced with these coarse geometries and they unuseful
// for reconstruction !):
//
if (iTOF) {
- if (geo == kHoles) {
//=================== TOF parameters ============================
- AliTOF *TOF = new AliTOFv2FHoles("TOF", "TOF with Holes");
- } else {
- AliTOF *TOF = new AliTOFv4T0("TOF", "normal TOF");
- }
+ AliTOF *TOF = new AliTOFv4T0("TOF", "normal TOF");
}
if (iRICH)
{
//=================== RICH parameters ===========================
- AliRICH *RICH = new AliRICHv3("RICH", "normal RICH");
+ AliRICH *RICH = new AliRICHv1("RICH", "normal RICH");
}
// Select the gas mixture (0: 97% Xe + 3% isobutane, 1: 90% Xe + 10% CO2)
TRD->SetGasMix(1);
- if (geo == kHoles) {
+ if (sgeo == kHoles) {
// With hole in front of PHOS
TRD->SetPHOShole();
// With hole in front of RICH
{
//=================== FMD parameters ============================
AliFMD *FMD = new AliFMDv1("FMD", "normal FMD");
- FMD->SetRingsSi1(256);
- FMD->SetRingsSi2(128);
- FMD->SetSectorsSi1(20);
- FMD->SetSectorsSi2(40);
}
if (iMUON)
//=================== MUON parameters ===========================
AliMUON *MUON = new AliMUONv1("MUON", "default");
+ MUON->AddGeometryBuilder(new AliMUONSt1GeometryBuilder(MUON));
+ MUON->AddGeometryBuilder(new AliMUONSt2GeometryBuilder(MUON));
+ MUON->AddGeometryBuilder(new AliMUONSlatGeometryBuilder(MUON));
+ MUON->AddGeometryBuilder(new AliMUONTriggerGeometryBuilder(MUON));
}
//=================== PHOS parameters ===========================
if (iEMCAL)
{
//=================== EMCAL parameters ============================
- AliEMCAL *EMCAL = new AliEMCALv1("EMCAL", "G56_2_55_19");
+ AliEMCAL *EMCAL = new AliEMCALv1("EMCAL", "EMCAL_55_25");
}
if (iCRT)
-AliGenerator* GeneratorFactory(PprRun_t run) {
+AliGenerator* GeneratorFactory(PprRun_t srun) {
Int_t isw = 3;
- if (rad == kNoGluonRadiation) isw = 0;
+ if (srad == kNoGluonRadiation) isw = 0;
- switch (run) {
+ AliGenerator * gGener = 0x0;
+ switch (srun) {
case test50:
+ {
comment = comment.Append(":HIJINGparam test 50 particles");
AliGenHIJINGpara *gener = new AliGenHIJINGpara(50);
gener->SetMomentumRange(0, 999999.);
Float_t thmin = EtaToTheta(8); // theta min. <---> eta max
Float_t thmax = EtaToTheta(-8); // theta max. <---> eta min
gener->SetThetaRange(thmin,thmax);
- break;
+ gGener=gener;
+ }
+ break;
case kParam_8000:
+ {
comment = comment.Append(":HIJINGparam N=8000");
AliGenHIJINGpara *gener = new AliGenHIJINGpara(86030);
gener->SetMomentumRange(0, 999999.);
Float_t thmin = EtaToTheta(8); // theta min. <---> eta max
Float_t thmax = EtaToTheta(-8); // theta max. <---> eta min
gener->SetThetaRange(thmin,thmax);
- break;
+ gGener=gener;
+ }
+ break;
case kParam_4000:
+ {
comment = comment.Append("HIJINGparam N=4000");
AliGenHIJINGpara *gener = new AliGenHIJINGpara(43015);
gener->SetMomentumRange(0, 999999.);
Float_t thmin = EtaToTheta(8); // theta min. <---> eta max
Float_t thmax = EtaToTheta(-8); // theta max. <---> eta min
gener->SetThetaRange(thmin,thmax);
+ gGener=gener;
+ }
break;
case kParam_2000:
+ {
comment = comment.Append("HIJINGparam N=2000");
AliGenHIJINGpara *gener = new AliGenHIJINGpara(21507);
gener->SetMomentumRange(0, 999999.);
Float_t thmin = EtaToTheta(8); // theta min. <---> eta max
Float_t thmax = EtaToTheta(-8); // theta max. <---> eta min
gener->SetThetaRange(thmin,thmax);
- break;
+ gGener=gener;
+ }
+ break;
//
// Hijing Central
//
case kHijing_cent1:
+ {
comment = comment.Append("HIJING cent1");
AliGenHijing *gener = HijingStandard();
// impact parameter range
gener->SetImpactParameterRange(0., 5.);
- break;
+ gGener=gener;
+ }
+ break;
case kHijing_cent2:
+ {
comment = comment.Append("HIJING cent2");
AliGenHijing *gener = HijingStandard();
// impact parameter range
gener->SetImpactParameterRange(0., 2.);
- break;
+ gGener=gener;
+ }
+ break;
//
// Hijing Peripheral
//
case kHijing_per1:
+ {
comment = comment.Append("HIJING per1");
AliGenHijing *gener = HijingStandard();
// impact parameter range
gener->SetImpactParameterRange(5., 8.6);
- break;
+ gGener=gener;
+ }
+ break;
case kHijing_per2:
+ {
comment = comment.Append("HIJING per2");
AliGenHijing *gener = HijingStandard();
// impact parameter range
gener->SetImpactParameterRange(8.6, 11.2);
- break;
+ gGener=gener;
+ }
+ break;
case kHijing_per3:
+ {
comment = comment.Append("HIJING per3");
AliGenHijing *gener = HijingStandard();
// impact parameter range
gener->SetImpactParameterRange(11.2, 13.2);
- break;
+ gGener=gener;
+ }
+ break;
case kHijing_per4:
+ {
comment = comment.Append("HIJING per4");
AliGenHijing *gener = HijingStandard();
// impact parameter range
gener->SetImpactParameterRange(13.2, 15.);
- break;
+ gGener=gener;
+ }
+ break;
case kHijing_per5:
+ {
comment = comment.Append("HIJING per5");
AliGenHijing *gener = HijingStandard();
// impact parameter range
gener->SetImpactParameterRange(15., 100.);
- break;
+ gGener=gener;
+ }
+ break;
//
// Jet-Jet
//
case kHijing_jj25:
+ {
comment = comment.Append("HIJING Jet 25 GeV");
AliGenHijing *gener = HijingStandard();
// impact parameter range
gener->SetSimpleJets(!isw);
gener->SetJetEtaRange(-0.3,0.3);
gener->SetJetPhiRange(75., 165.);
- break;
+ gGener=gener;
+ }
+ break;
case kHijing_jj50:
+ {
comment = comment.Append("HIJING Jet 50 GeV");
AliGenHijing *gener = HijingStandard();
// impact parameter range
gener->SetSimpleJets(!isw);
gener->SetJetEtaRange(-0.3,0.3);
gener->SetJetPhiRange(75., 165.);
+ gGener=gener;
+ }
break;
case kHijing_jj75:
+ {
comment = comment.Append("HIJING Jet 75 GeV");
AliGenHijing *gener = HijingStandard();
// impact parameter range
gener->SetSimpleJets(!isw);
gener->SetJetEtaRange(-0.3,0.3);
gener->SetJetPhiRange(75., 165.);
- break;
+ gGener=gener;
+ }
+ break;
case kHijing_jj100:
+ {
comment = comment.Append("HIJING Jet 100 GeV");
AliGenHijing *gener = HijingStandard();
// impact parameter range
gener->SetSimpleJets(!isw);
gener->SetJetEtaRange(-0.3,0.3);
gener->SetJetPhiRange(75., 165.);
- break;
+ gGener=gener;
+ }
+ break;
case kHijing_jj200:
+ {
comment = comment.Append("HIJING Jet 200 GeV");
AliGenHijing *gener = HijingStandard();
// impact parameter range
gener->SetSimpleJets(!isw);
gener->SetJetEtaRange(-0.3,0.3);
gener->SetJetPhiRange(75., 165.);
- break;
+ gGener=gener;
+ }
+ break;
//
// Gamma-Jet
//
case kHijing_gj25:
+ {
comment = comment.Append("HIJING Gamma 25 GeV");
AliGenHijing *gener = HijingStandard();
// impact parameter range
gener->SetSimpleJets(!isw);
gener->SetJetEtaRange(-0.12, 0.12);
gener->SetJetPhiRange(220., 320.);
- break;
+ gGener=gener;
+ }
+ break;
case kHijing_gj50:
+ {
comment = comment.Append("HIJING Gamma 50 GeV");
AliGenHijing *gener = HijingStandard();
// impact parameter range
gener->SetSimpleJets(!isw);
gener->SetJetEtaRange(-0.12, 0.12);
gener->SetJetPhiRange(220., 320.);
- break;
+ gGener=gener;
+ }
+ break;
case kHijing_gj75:
+ {
comment = comment.Append("HIJING Gamma 75 GeV");
AliGenHijing *gener = HijingStandard();
// impact parameter range
gener->SetSimpleJets(!isw);
gener->SetJetEtaRange(-0.12, 0.12);
gener->SetJetPhiRange(220., 320.);
- break;
+ gGener=gener;
+ }
+ break;
case kHijing_gj100:
+ {
comment = comment.Append("HIJING Gamma 100 GeV");
AliGenHijing *gener = HijingStandard();
// impact parameter range
gener->SetSimpleJets(!isw);
gener->SetJetEtaRange(-0.12, 0.12);
gener->SetJetPhiRange(220., 320.);
- break;
+ gGener=gener;
+ }
+ break;
case kHijing_gj200:
+ {
comment = comment.Append("HIJING Gamma 200 GeV");
AliGenHijing *gener = HijingStandard();
// impact parameter range
gener->SetSimpleJets(!isw);
gener->SetJetEtaRange(-0.12, 0.12);
gener->SetJetPhiRange(220., 320.);
- break;
+ gGener=gener;
+ }
+ break;
case kHijing_pA:
+ {
comment = comment.Append("HIJING pA");
AliGenCocktail *gener = new AliGenCocktail();
-// gener->SetTrackingFlag(0);
- gener->SetOrigin(0, 0, 0); // vertex position
- gener->SetSigma(0, 0, 5.3); // Sigma in (X,Y,Z) (cm) on IP position
- gener->SetCutVertexZ(1.); // Truncate at 1 sigma
- gener->SetVertexSmear(kPerEvent);
+
AliGenHijing *hijing = new AliGenHijing(-1);
// centre of mass energy
hijing->SetEnergyCMS(TMath::Sqrt(82./208.) * 14000.);
gray->SetDebug(1);
gener->AddGenerator(hijing,"Hijing pPb", 1);
gener->AddGenerator(gray, "Gray Particles",1);
- break;
+ gGener=gener;
+ }
+ break;
+ case kPythia6:
+ {
+ comment = comment.Append(":Pythia p-p @ 14 TeV");
+ AliGenPythia *gener = new AliGenPythia(-1);
+ gener->SetMomentumRange(0,999999);
+ gener->SetPhiRange(-180,180);
+ gener->SetThetaRange(0., 180.);
+ gener->SetYRange(-12,12);
+ gener->SetPtRange(0,1000);
+ gener->SetStrucFunc(kCTEQ4L);
+ gener->SetProcess(kPyMb);
+ gener->SetEnergyCMS(14000.);
+ gGener=gener;
+ }
+ break;
+ case kPythia6Jets20_24:
+ {
+ comment = comment.Append(":Pythia jets 20-24 GeV @ 5.5 TeV");
+ AliGenPythia * gener = new AliGenPythia(-1);
+ gener->SetEnergyCMS(5500.);// Centre of mass energy
+ gener->SetProcess(kPyJets);// Process type
+ gener->SetJetEtaRange(-0.5, 0.5);// Final state kinematic cuts
+ gener->SetJetPhiRange(0., 360.);
+ gener->SetJetEtRange(10., 1000.);
+ gener->SetGluonRadiation(1,1);
+ // gener->SetPtKick(0.);
+ // Structure function
+ gener->SetStrucFunc(kCTEQ4L);
+ gener->SetPtHard(20., 24.);// Pt transfer of the hard scattering
+ gener->SetPycellParameters(2., 274, 432, 0., 4., 5., 1.0);
+ gener->SetForceDecay(kAll);// Decay type (semielectronic, etc.)
+ gGener=gener;
+ }
+ break;
+ case kPythia6Jets24_29:
+ {
+ comment = comment.Append(":Pythia jets 24-29 GeV @ 5.5 TeV");
+ AliGenPythia * gener = new AliGenPythia(-1);
+ gener->SetEnergyCMS(5500.);// Centre of mass energy
+ gener->SetProcess(kPyJets);// Process type
+ gener->SetJetEtaRange(-0.5, 0.5);// Final state kinematic cuts
+ gener->SetJetPhiRange(0., 360.);
+ gener->SetJetEtRange(10., 1000.);
+ gener->SetGluonRadiation(1,1);
+ // gener->SetPtKick(0.);
+ // Structure function
+ gener->SetStrucFunc(kCTEQ4L);
+ gener->SetPtHard(24., 29.);// Pt transfer of the hard scattering
+ gener->SetPycellParameters(2., 274, 432, 0., 4., 5., 1.0);
+ gener->SetForceDecay(kAll);// Decay type (semielectronic, etc.)
+ gGener=gener;
+ }
+ break;
+ case kPythia6Jets29_35:
+ {
+ comment = comment.Append(":Pythia jets 29-35 GeV @ 5.5 TeV");
+ AliGenPythia * gener = new AliGenPythia(-1);
+ gener->SetEnergyCMS(5500.);// Centre of mass energy
+ gener->SetProcess(kPyJets);// Process type
+ gener->SetJetEtaRange(-0.5, 0.5);// Final state kinematic cuts
+ gener->SetJetPhiRange(0., 360.);
+ gener->SetJetEtRange(10., 1000.);
+ gener->SetGluonRadiation(1,1);
+ // gener->SetPtKick(0.);
+ // Structure function
+ gener->SetStrucFunc(kCTEQ4L);
+ gener->SetPtHard(29., 35.);// Pt transfer of the hard scattering
+ gener->SetPycellParameters(2., 274, 432, 0., 4., 5., 1.0);
+ gener->SetForceDecay(kAll);// Decay type (semielectronic, etc.)
+ gGener=gener;
+ }
+ break;
+ case kPythia6Jets35_42:
+ {
+ comment = comment.Append(":Pythia jets 35-42 GeV @ 5.5 TeV");
+ AliGenPythia * gener = new AliGenPythia(-1);
+ gener->SetEnergyCMS(5500.);// Centre of mass energy
+ gener->SetProcess(kPyJets);// Process type
+ gener->SetJetEtaRange(-0.5, 0.5);// Final state kinematic cuts
+ gener->SetJetPhiRange(0., 360.);
+ gener->SetJetEtRange(10., 1000.);
+ gener->SetGluonRadiation(1,1);
+ // gener->SetPtKick(0.);
+ // Structure function
+ gener->SetStrucFunc(kCTEQ4L);
+ gener->SetPtHard(35., 42.);// Pt transfer of the hard scattering
+ gener->SetPycellParameters(2., 274, 432, 0., 4., 5., 1.0);
+ gener->SetForceDecay(kAll);// Decay type (semielectronic, etc.)
+ gGener=gener;
+ }
+ break;
+ case kPythia6Jets42_50:
+ {
+ comment = comment.Append(":Pythia jets 42-50 GeV @ 5.5 TeV");
+ AliGenPythia * gener = new AliGenPythia(-1);
+ gener->SetEnergyCMS(5500.);// Centre of mass energy
+ gener->SetProcess(kPyJets);// Process type
+ gener->SetJetEtaRange(-0.5, 0.5);// Final state kinematic cuts
+ gener->SetJetPhiRange(0., 360.);
+ gener->SetJetEtRange(10., 1000.);
+ gener->SetGluonRadiation(1,1);
+ // gener->SetPtKick(0.);
+ // Structure function
+ gener->SetStrucFunc(kCTEQ4L);
+ gener->SetPtHard(42., 50.);// Pt transfer of the hard scattering
+ gener->SetPycellParameters(2., 274, 432, 0., 4., 5., 1.0);
+ gener->SetForceDecay(kAll);// Decay type (semielectronic, etc.)
+ gGener=gener;
+ }
+ break;
+ case kPythia6Jets50_60:
+ {
+ comment = comment.Append(":Pythia jets 50-60 GeV @ 5.5 TeV");
+ AliGenPythia * gener = new AliGenPythia(-1);
+ gener->SetEnergyCMS(5500.);// Centre of mass energy
+ gener->SetProcess(kPyJets);// Process type
+ gener->SetJetEtaRange(-0.5, 0.5);// Final state kinematic cuts
+ gener->SetJetPhiRange(0., 360.);
+ gener->SetJetEtRange(10., 1000.);
+ gener->SetGluonRadiation(1,1);
+ // gener->SetPtKick(0.);
+ // Structure function
+ gener->SetStrucFunc(kCTEQ4L);
+ gener->SetPtHard(50., 60.);// Pt transfer of the hard scattering
+ gener->SetPycellParameters(2., 274, 432, 0., 4., 5., 1.0);
+ gener->SetForceDecay(kAll);// Decay type (semielectronic, etc.)
+ gGener=gener;
+ }
+ break;
+ case kPythia6Jets60_72:
+ {
+ comment = comment.Append(":Pythia jets 60-72 GeV @ 5.5 TeV");
+ AliGenPythia * gener = new AliGenPythia(-1);
+ gener->SetEnergyCMS(5500.);// Centre of mass energy
+ gener->SetProcess(kPyJets);// Process type
+ gener->SetJetEtaRange(-0.5, 0.5);// Final state kinematic cuts
+ gener->SetJetPhiRange(0., 360.);
+ gener->SetJetEtRange(10., 1000.);
+ gener->SetGluonRadiation(1,1);
+ // gener->SetPtKick(0.);
+ // Structure function
+ gener->SetStrucFunc(kCTEQ4L);
+ gener->SetPtHard(60., 72.);// Pt transfer of the hard scattering
+ gener->SetPycellParameters(2., 274, 432, 0., 4., 5., 1.0);
+ gener->SetForceDecay(kAll);// Decay type (semielectronic, etc.)
+ gGener=gener;
+ }
+ break;
+ case kPythia6Jets72_86:
+ {
+ comment = comment.Append(":Pythia jets 72-86 GeV @ 5.5 TeV");
+ AliGenPythia * gener = new AliGenPythia(-1);
+ gener->SetEnergyCMS(5500.);// Centre of mass energy
+ gener->SetProcess(kPyJets);// Process type
+ gener->SetJetEtaRange(-0.5, 0.5);// Final state kinematic cuts
+ gener->SetJetPhiRange(0., 360.);
+ gener->SetJetEtRange(10., 1000.);
+ gener->SetGluonRadiation(1,1);
+ // gener->SetPtKick(0.);
+ // Structure function
+ gener->SetStrucFunc(kCTEQ4L);
+ gener->SetPtHard(72., 86.);// Pt transfer of the hard scattering
+ gener->SetPycellParameters(2., 274, 432, 0., 4., 5., 1.0);
+ gener->SetForceDecay(kAll);// Decay type (semielectronic, etc.)
+ gGener=gener;
+ }
+ break;
+ case kPythia6Jets86_104:
+ {
+ comment = comment.Append(":Pythia jets 86-104 GeV @ 5.5 TeV");
+ AliGenPythia * gener = new AliGenPythia(-1);
+ gener->SetEnergyCMS(5500.);// Centre of mass energy
+ gener->SetProcess(kPyJets);// Process type
+ gener->SetJetEtaRange(-0.5, 0.5);// Final state kinematic cuts
+ gener->SetJetPhiRange(0., 360.);
+ gener->SetJetEtRange(10., 1000.);
+ gener->SetGluonRadiation(1,1);
+ // gener->SetPtKick(0.);
+ // Structure function
+ gener->SetStrucFunc(kCTEQ4L);
+ gener->SetPtHard(86., 104.);// Pt transfer of the hard scattering
+ gener->SetPycellParameters(2., 274, 432, 0., 4., 5., 1.0);
+ gener->SetForceDecay(kAll);// Decay type (semielectronic, etc.)
+ gGener=gener;
+ }
+ break;
+ case kPythia6Jets104_125:
+ {
+ comment = comment.Append(":Pythia jets 105-125 GeV @ 5.5 TeV");
+ AliGenPythia * gener = new AliGenPythia(-1);
+ gener->SetEnergyCMS(5500.);// Centre of mass energy
+ gener->SetProcess(kPyJets);// Process type
+ gener->SetJetEtaRange(-0.5, 0.5);// Final state kinematic cuts
+ gener->SetJetPhiRange(0., 360.);
+ gener->SetJetEtRange(10., 1000.);
+ gener->SetGluonRadiation(1,1);
+ // gener->SetPtKick(0.);
+ // Structure function
+ gener->SetStrucFunc(kCTEQ4L);
+ gener->SetPtHard(104., 125.);// Pt transfer of the hard scattering
+ gener->SetPycellParameters(2., 274, 432, 0., 4., 5., 1.0);
+ gener->SetForceDecay(kAll);// Decay type (semielectronic, etc.)
+ gGener=gener;
+ }
+ break;
+ case kPythia6Jets125_150:
+ {
+ comment = comment.Append(":Pythia jets 125-150 GeV @ 5.5 TeV");
+ AliGenPythia * gener = new AliGenPythia(-1);
+ gener->SetEnergyCMS(5500.);// Centre of mass energy
+ gener->SetProcess(kPyJets);// Process type
+ gener->SetJetEtaRange(-0.5, 0.5);// Final state kinematic cuts
+ gener->SetJetPhiRange(0., 360.);
+ gener->SetJetEtRange(10., 1000.);
+ gener->SetGluonRadiation(1,1);
+ // gener->SetPtKick(0.);
+ // Structure function
+ gener->SetStrucFunc(kCTEQ4L);
+ gener->SetPtHard(125., 150.);// Pt transfer of the hard scattering
+ gener->SetPycellParameters(2., 274, 432, 0., 4., 5., 1.0);
+ gener->SetForceDecay(kAll);// Decay type (semielectronic, etc.)
+ gGener=gener;
+ }
+ break;
+ case kPythia6Jets150_180:
+ {
+ comment = comment.Append(":Pythia jets 150-180 GeV @ 5.5 TeV");
+ AliGenPythia * gener = new AliGenPythia(-1);
+ gener->SetEnergyCMS(5500.);// Centre of mass energy
+ gener->SetProcess(kPyJets);// Process type
+ gener->SetJetEtaRange(-0.5, 0.5);// Final state kinematic cuts
+ gener->SetJetPhiRange(0., 360.);
+ gener->SetJetEtRange(10., 1000.);
+ gener->SetGluonRadiation(1,1);
+ // gener->SetPtKick(0.);
+ // Structure function
+ gener->SetStrucFunc(kCTEQ4L);
+ gener->SetPtHard(150., 180.);// Pt transfer of the hard scattering
+ gener->SetPycellParameters(2., 274, 432, 0., 4., 5., 1.0);
+ gener->SetForceDecay(kAll);// Decay type (semielectronic, etc.)
+ gGener=gener;
+ }
+ break;
+ case kD0PbPb5500:
+ {
+ comment = comment.Append(" D0 in Pb-Pb at 5.5 TeV");
+ AliGenPythia * gener = new AliGenPythia(10);
+ gener->SetProcess(kPyD0PbPbMNR);
+ gener->SetStrucFunc(kCTEQ4L);
+ gener->SetPtHard(2.1,-1.0);
+ gener->SetEnergyCMS(5500.);
+ gener->SetNuclei(208,208);
+ gGener=gener;
+ }
+ break;
+ case kD_TRD:
+ {
+ comment = comment.Append(" D0 for TRD at 5.5 TeV");
+ AliGenPythia *gener = new AliGenPythia(1);
+ gener->SetCutOnChild(0);
+ gener->SetStrucFunc(kCTEQ4L);
+ gener->SetProcess(kPyCharm);
+ gener->SetPtHard(0.,-1);
+ gener->SetEnergyCMS(5500.);
+ gGener=gener;
+ }
+ break;
+ case kB_TRD:
+ {
+ comment = comment.Append(" B for TRD at 5.5 TeV");
+ AliGenPythia *gener = new AliGenPythia(1);
+ gener->SetCutOnChild(0);
+ gener->SetStrucFunc(kCTEQ4L);
+ gener->SetProcess(kPyBeauty);
+ gener->SetPtHard(0.,-1);
+ gener->SetEnergyCMS(5500.);
+ gGener=gener;
+ }
+ break;
+ case kJpsi_TRD:
+ {
+ comment = comment.Append(" J/psi for TRD at 5.5 TeV");
+ AliGenParam *gener = new AliGenParam(1,new AliGenGSIlib(),
+ AliGenGSIlib::kJPsi,"MUON");
+ gener->SetMomentumRange(0,999);
+ gener->SetPtRange(0,30.);
+ gener->SetPhiRange(0., 360.);
+ gener->SetYRange(-0.9,+0.9);
+ gener->SetForceDecay(kDiElectron);
+ gGener=gener;
+ }
+ break;
+ case kU_TRD:
+ {
+ comment = comment.Append(" Upsilon for TRD at 5.5 TeV");
+ AliGenParam *gener = new AliGenParam(1,new AliGenGSIlib(),
+ AliGenGSIlib::kUpsilon,"RITMAN");
+ gener->SetMomentumRange(0,999);
+ gener->SetPtRange(0,30.);
+ gener->SetPhiRange(0., 360.);
+ gener->SetYRange(-0.9,0.9);
+ gener->SetForceDecay(kDiElectron);
+ gGener=gener;
+ }
+ break;
+ case kPyJJ:
+ {
+ comment = comment.Append(" Jet-jet at 5.5 TeV");
+ AliGenPythia *gener = new AliGenPythia(-1);
+ gener->SetEnergyCMS(5500.);
+ gener->SetProcess(kPyJets);
+ Double_t ptHardMin=10.0, ptHardMax=-1.0;
+ gener->SetPtHard(ptHardMin,ptHardMax);
+ gener->SetYHard(-0.7,0.7);
+ gener->SetJetEtaRange(-0.2,0.2);
+ gener->SetEventListRange(0,1);
+ gGener=gener;
+ }
+ break;
+ case kPyGJ:
+ {
+ comment = comment.Append(" Gamma-jet at 5.5 TeV");
+ AliGenPythia *gener = new AliGenPythia(-1);
+ gener->SetEnergyCMS(5500.);
+ gener->SetProcess(kPyDirectGamma);
+ Double_t ptHardMin=10.0, ptHardMax=-1.0;
+ gener->SetPtHard(ptHardMin,ptHardMax);
+ gener->SetYHard(-1.0,1.0);
+ gener->SetGammaEtaRange(-0.13,0.13);
+ gener->SetGammaPhiRange(210.,330.);
+ gener->SetEventListRange(0,1);
+ gGener=gener;
+ }
+ break;
+ default: break;
}
- return gener;
+ return gGener;
}
AliGenHijing* HijingStandard()
// tell hijing to keep the full parent child chain
gener->KeepFullEvent();
// enable jet quenching
- gener->SetJetQuenching(4);
+ gener->SetJetQuenching(1);
// enable shadowing
gener->SetShadowing(1);
// neutral pion and heavy particle decays switched off
}
+void ProcessEnvironmentVars()
+{
+ // Run type
+ if (gSystem->Getenv("CONFIG_RUN_TYPE")) {
+ for (Int_t iRun = 0; iRun < kRunMax; iRun++) {
+ if (strcmp(gSystem->Getenv("CONFIG_RUN_TYPE"), pprRunName[iRun])==0) {
+ srun = (PprRun_t)iRun;
+ cout<<"Run type set to "<<pprRunName[iRun]<<endl;
+ }
+ }
+ }
+ // Random Number seed
+ if (gSystem->Getenv("CONFIG_SEED")) {
+ sseed = atoi(gSystem->Getenv("CONFIG_SEED"));
+ }
+}
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff