Final TOF version: 18 modules with holes for PHOS (Annalisa)

[u/mrichter/AliRoot.git] / test / genkine / sim / Config.C

diff --git a/test/genkine/sim/Config.C b/test/genkine/sim/Config.C
index ffcc6f32f3d46122280f0d232076c7021067cc39..80a2182de54c8c85b8f890e14e8573affd2ad46a 100644 (file)
--- a/test/genkine/sim/Config.C
+++ b/test/genkine/sim/Config.C
@@ -40,11 +40,11 @@
 #include "STRUCT/AliFRAMEv2.h"
 #include "STRUCT/AliSHILv3.h"
 #include "STRUCT/AliPIPEv3.h"
-#include "ITS/AliITSvPPRasymmFMD.h"
+#include "ITS/AliITSv11Hybrid.h"
 #include "TPC/AliTPCv2.h"
 #include "TOF/AliTOFv6T0.h"
-#include "HMPID/AliHMPIDv1.h"
-#include "ZDC/AliZDCv2.h"
+#include "HMPID/AliHMPIDv3.h"
+#include "ZDC/AliZDCv3.h"
 #include "TRD/AliTRDv1.h"
 #include "FMD/AliFMDv1.h"
 #include "MUON/AliMUONv1.h"
@@ -78,6 +78,7 @@ const char * pprTrigConfName[] = {
     "p-p","Pb-Pb"
 };
 
+
 // This part for configuration    
 
 static PprRad_t srad = kGluonRadiation;
@@ -103,8 +104,12 @@ void Config()
   
 
 
-   // libraries required by geant321
+   // libraries required by geant321 and Pythia6
 #if defined(__CINT__)
+    gSystem->Load("liblhapdf.so");      // Parton density functions
+    gSystem->Load("libEGPythia6.so");   // TGenerator interface
+    gSystem->Load("libpythia6.so");     // Pythia
+    gSystem->Load("libAliPythia6.so");  // ALICE specific implementations
     gSystem->Load("libgeant321");
 #endif
 
@@ -138,14 +143,14 @@ void Config()
 
     //forbid some decays
     AliPythia * py= AliPythia::Instance();
-    py->SetMDME(731,1,0); //forbid D*+->D+ + pi0
-    py->SetMDME(732,1,0);//forbid D*+->D+ + gamma
+    py->SetMDME(737,1,0); //forbid D*+->D+ + pi0
+    py->SetMDME(738,1,0);//forbid D*+->D+ + gamma
 
-    for(Int_t d=741; d<=756; d++){ 
+    for(Int_t d=747; d<=762; d++){ 
       py->SetMDME(d,1,0);
     }
 
-    for(Int_t d=758; d<=801; d++){ 
+    for(Int_t d=764; d<=807; d++){ 
       py->SetMDME(d,1,0);
     }
 
@@ -292,6 +297,7 @@ void Config()
         //=================== FRAME parameters ============================
 
         AliFRAMEv2 *FRAME = new AliFRAMEv2("FRAME", "Space Frame");
+       FRAME->SetHoles(1);
     }
 
     if (iSHIL)
@@ -309,60 +315,11 @@ void Config()
         AliPIPE *PIPE = new AliPIPEv3("PIPE", "Beam Pipe");
     }
  
-    if(iITS) {
+    if (iITS)
+    {
+        //=================== ITS parameters ============================
 
-    //=================== ITS parameters ============================
-    //
-    // As the innermost detector in ALICE, the Inner Tracking System "impacts" on
-    // almost all other detectors. This involves the fact that the ITS geometry
-    // still has several options to be followed in parallel in order to determine
-    // the best set-up which minimizes the induced background. All the geometries
-    // available to date are described in the following. Read carefully the comments
-    // and use the default version (the only one uncommented) unless you are making
-    // comparisons and you know what you are doing. In this case just uncomment the
-    // ITS geometry you want to use and run Aliroot.
-    //
-    // Detailed geometries:         
-    //
-    //
-    //AliITS *ITS  = new AliITSv5symm("ITS","Updated ITS TDR detailed version with symmetric services");
-    //
-    //AliITS *ITS  = new AliITSv5asymm("ITS","Updates ITS TDR detailed version with asymmetric services");
-    //
-       AliITSvPPRasymmFMD *ITS  = new AliITSvPPRasymmFMD("ITS","New ITS PPR detailed version with asymmetric services");
-       ITS->SetMinorVersion(2);  // don't touch this parameter if you're not an ITS developer
-       ITS->SetReadDet(kFALSE);          // don't touch this parameter if you're not an ITS developer
-    //    ITS->SetWriteDet("$ALICE_ROOT/ITS/ITSgeometry_vPPRasymm2.det");  // don't touch this parameter if you're not an ITS developer
-       ITS->SetThicknessDet1(200.);   // detector thickness on layer 1 must be in the range [100,300]
-       ITS->SetThicknessDet2(200.);   // detector thickness on layer 2 must be in the range [100,300]
-       ITS->SetThicknessChip1(150.);  // chip thickness on layer 1 must be in the range [150,300]
-       ITS->SetThicknessChip2(150.);  // chip thickness on layer 2 must be in the range [150,300]
-       ITS->SetRails(0);            // 1 --> rails in ; 0 --> rails out
-       ITS->SetCoolingFluid(1);   // 1 --> water ; 0 --> freon
-
-    // Coarse geometries (warning: no hits are produced with these coarse geometries and they unuseful 
-    // for reconstruction !):
-    //                                                     
-    //
-    //AliITSvPPRcoarseasymm *ITS  = new AliITSvPPRcoarseasymm("ITS","New ITS PPR coarse version with asymmetric services");
-    //ITS->SetRails(0);                // 1 --> rails in ; 0 --> rails out
-    //ITS->SetSupportMaterial(0);      // 0 --> Copper ; 1 --> Aluminum ; 2 --> Carbon
-    //
-    //AliITS *ITS  = new AliITSvPPRcoarsesymm("ITS","New ITS PPR coarse version with symmetric services");
-    //ITS->SetRails(0);                // 1 --> rails in ; 0 --> rails out
-    //ITS->SetSupportMaterial(0);      // 0 --> Copper ; 1 --> Aluminum ; 2 --> Carbon
-    //                      
-    //
-    //
-    // Geant3 <-> EUCLID conversion
-    // ============================
-    //
-    // SetEUCLID is a flag to output (=1) or not to output (=0) both geometry and
-    // media to two ASCII files (called by default ITSgeometry.euc and
-    // ITSgeometry.tme) in a format understandable to the CAD system EUCLID.
-    // The default (=0) means that you dont want to use this facility.
-    //
-       ITS->SetEUCLID(0);  
+       AliITS *ITS  = new AliITSv11Hybrid("ITS","ITS v11Hybrid");
     }
 
     if (iTPC)
@@ -381,7 +338,7 @@ void Config()
     if (iHMPID)
     {
         //=================== HMPID parameters ===========================
-        AliHMPID *HMPID = new AliHMPIDv1("HMPID", "normal HMPID");
+        AliHMPID *HMPID = new AliHMPIDv3("HMPID", "normal HMPID");
 
     }
 
@@ -390,7 +347,7 @@ void Config()
     {
         //=================== ZDC parameters ============================
 
-        AliZDC *ZDC = new AliZDCv2("ZDC", "normal ZDC");
+        AliZDC *ZDC = new AliZDCv3("ZDC", "normal ZDC");
     }
 
     if (iTRD)