The default thickness of the chips is set to 150 mkm (D.Elia). Removing some obsolete...

diff --git a/macros/Config.C b/macros/Config.C
index c2483a62a98c64ca3df0ed4b11e3bba4a789e593..34ae05925f010641f2fd1ceb9f323182aebfc5ff 100644 (file)
--- a/macros/Config.C
+++ b/macros/Config.C
@@ -260,8 +260,8 @@ void Config()
        //    ITS->SetWriteDet("$ALICE_ROOT/ITS/ITSgeometry_vPPRasymm2.det");  // don't touch this parameter if you're not an ITS developer
        ITS->SetThicknessDet1(200.);   // detector thickness on layer 1 must be in the range [100,300]
        ITS->SetThicknessDet2(200.);   // detector thickness on layer 2 must be in the range [100,300]
        //    ITS->SetWriteDet("$ALICE_ROOT/ITS/ITSgeometry_vPPRasymm2.det");  // don't touch this parameter if you're not an ITS developer
        ITS->SetThicknessDet1(200.);   // detector thickness on layer 1 must be in the range [100,300]
        ITS->SetThicknessDet2(200.);   // detector thickness on layer 2 must be in the range [100,300]

-       ITS->SetThicknessChip1(200.);  // chip thickness on layer 1 must be in the range [150,300]
-       ITS->SetThicknessChip2(200.);  // chip thickness on layer 2 must be in the range [150,300]
+       ITS->SetThicknessChip1(150.);  // chip thickness on layer 1 must be in the range [150,300]
+       ITS->SetThicknessChip2(150.);  // chip thickness on layer 2 must be in the range [150,300]

        ITS->SetRails(0);              // 1 --> rails in ; 0 --> rails out
        ITS->SetCoolingFluid(1);       // 1 --> water ; 0 --> freon
 
        ITS->SetRails(0);              // 1 --> rails in ; 0 --> rails out
        ITS->SetCoolingFluid(1);       // 1 --> water ; 0 --> freon
 

diff --git a/macros/ConfigBeautyPPR.C b/macros/ConfigBeautyPPR.C
index 3cd1e98987412a6e816d88475daa1b111ac22eb4..68d48edd5cf662e20ba069d006a0e8d28676d701 100644 (file)
--- a/macros/ConfigBeautyPPR.C
+++ b/macros/ConfigBeautyPPR.C
@@ -256,23 +256,11 @@ void Config()
     ITS->SetWriteDet("$ALICE_ROOT/ITS/ITSgeometry_vPPRasymm2.det");  // don't touch this parameter if you're not an ITS developer
     ITS->SetThicknessDet1(200.);   // detector thickness on layer 1 must be in the range [150,300]
     ITS->SetThicknessDet2(200.);   // detector thickness on layer 2 must be in the range [150,300]
     ITS->SetWriteDet("$ALICE_ROOT/ITS/ITSgeometry_vPPRasymm2.det");  // don't touch this parameter if you're not an ITS developer
     ITS->SetThicknessDet1(200.);   // detector thickness on layer 1 must be in the range [150,300]
     ITS->SetThicknessDet2(200.);   // detector thickness on layer 2 must be in the range [150,300]

-    ITS->SetThicknessChip1(200.);  // chip thickness on layer 1 must be in the range [100,300]
-    ITS->SetThicknessChip2(200.);  // chip thickness on layer 2 must be in the range [100,300]
+    ITS->SetThicknessChip1(150.);  // chip thickness on layer 1 must be in the range [100,300]
+    ITS->SetThicknessChip2(150.);  // chip thickness on layer 2 must be in the range [100,300]

     ITS->SetRails(1);             // 1 --> rails in ; 0 --> rails out
     ITS->SetCoolingFluid(1);       // 1 --> water ; 0 --> freon
     //
     ITS->SetRails(1);             // 1 --> rails in ; 0 --> rails out
     ITS->SetCoolingFluid(1);       // 1 --> water ; 0 --> freon
     //

-    //AliITSvPPRsymm *ITS  = new AliITSvPPRsymm("ITS","New ITS PPR detailed version with symmetric services");
-    //ITS->SetMinorVersion(2);                                       // don't touch this parameter if you're not an ITS developer
-    //ITS->SetReadDet(kFALSE);                                       // don't touch this parameter if you're not an ITS developer
-    //ITS->SetWriteDet("$ALICE_ROOT/ITS/ITSgeometry_vPPRsymm2.det"); // don't touch this parameter if you're not an ITS developer
-    //ITS->SetThicknessDet1(300.);   // detector thickness on layer 1 must be in the range [150,300]
-    //ITS->SetThicknessDet2(300.);   // detector thickness on layer 2 must be in the range [150,300]
-    //ITS->SetThicknessChip1(300.);  // chip thickness on layer 1 must be in the range [100,300]
-    //ITS->SetThicknessChip2(300.);  // chip thickness on layer 2 must be in the range [100,300]
-    //ITS->SetRails(1);              // 1 --> rails in ; 0 --> rails out
-    //ITS->SetCoolingFluid(1);       // 1 --> water ; 0 --> freon
-    //
-    //

     // Coarse geometries (warning: no hits are produced with these coarse geometries and they unuseful 
     // for reconstruction !):
     //                                                     
     // Coarse geometries (warning: no hits are produced with these coarse geometries and they unuseful 
     // for reconstruction !):
     //                                                     

diff --git a/macros/ConfigCharmPPR.C b/macros/ConfigCharmPPR.C
index 1776304265827b68a1651515246c127556cb0fe1..1dec8a399b7d21ad58d740cdcf6bbfaa4b20f284 100644 (file)
--- a/macros/ConfigCharmPPR.C
+++ b/macros/ConfigCharmPPR.C
@@ -255,23 +255,11 @@ void Config()
     ITS->SetWriteDet("$ALICE_ROOT/ITS/ITSgeometry_vPPRasymm2.det");  // don't touch this parameter if you're not an ITS developer
     ITS->SetThicknessDet1(200.);   // detector thickness on layer 1 must be in the range [150,300]
     ITS->SetThicknessDet2(200.);   // detector thickness on layer 2 must be in the range [150,300]
     ITS->SetWriteDet("$ALICE_ROOT/ITS/ITSgeometry_vPPRasymm2.det");  // don't touch this parameter if you're not an ITS developer
     ITS->SetThicknessDet1(200.);   // detector thickness on layer 1 must be in the range [150,300]
     ITS->SetThicknessDet2(200.);   // detector thickness on layer 2 must be in the range [150,300]

-    ITS->SetThicknessChip1(200.);  // chip thickness on layer 1 must be in the range [100,300]
-    ITS->SetThicknessChip2(200.);  // chip thickness on layer 2 must be in the range [100,300]
+    ITS->SetThicknessChip1(150.);  // chip thickness on layer 1 must be in the range [100,300]
+    ITS->SetThicknessChip2(150.);  // chip thickness on layer 2 must be in the range [100,300]

     ITS->SetRails(1);             // 1 --> rails in ; 0 --> rails out
     ITS->SetCoolingFluid(1);       // 1 --> water ; 0 --> freon
     //
     ITS->SetRails(1);             // 1 --> rails in ; 0 --> rails out
     ITS->SetCoolingFluid(1);       // 1 --> water ; 0 --> freon
     //

-    //AliITSvPPRsymm *ITS  = new AliITSvPPRsymm("ITS","New ITS PPR detailed version with symmetric services");
-    //ITS->SetMinorVersion(2);                                       // don't touch this parameter if you're not an ITS developer
-    //ITS->SetReadDet(kFALSE);                                       // don't touch this parameter if you're not an ITS developer
-    //ITS->SetWriteDet("$ALICE_ROOT/ITS/ITSgeometry_vPPRsymm2.det"); // don't touch this parameter if you're not an ITS developer
-    //ITS->SetThicknessDet1(300.);   // detector thickness on layer 1 must be in the range [150,300]
-    //ITS->SetThicknessDet2(300.);   // detector thickness on layer 2 must be in the range [150,300]
-    //ITS->SetThicknessChip1(300.);  // chip thickness on layer 1 must be in the range [100,300]
-    //ITS->SetThicknessChip2(300.);  // chip thickness on layer 2 must be in the range [100,300]
-    //ITS->SetRails(1);              // 1 --> rails in ; 0 --> rails out
-    //ITS->SetCoolingFluid(1);       // 1 --> water ; 0 --> freon
-    //
-    //

     // Coarse geometries (warning: no hits are produced with these coarse geometries and they unuseful 
     // for reconstruction !):
     //                                                     
     // Coarse geometries (warning: no hits are produced with these coarse geometries and they unuseful 
     // for reconstruction !):
     //                                                     

diff --git a/macros/ConfigHBT.C b/macros/ConfigHBT.C
index 9beab063a17c489cd09999fb8c5a2c2ae5d42bf4..adbee51838c4ab69b665162c364424483e758b7d 100644 (file)
--- a/macros/ConfigHBT.C
+++ b/macros/ConfigHBT.C
@@ -329,22 +329,11 @@ void Config()
     //    ITS->SetWriteDet("$ALICE_ROOT/ITS/ITSgeometry_vPPRasymm2.det");  // don't touch this parameter if you're not an ITS developer
     ITS->SetThicknessDet1(200.);   // detector thickness on layer 1 must be in the range [100,300]
     ITS->SetThicknessDet2(200.);   // detector thickness on layer 2 must be in the range [100,300]
     //    ITS->SetWriteDet("$ALICE_ROOT/ITS/ITSgeometry_vPPRasymm2.det");  // don't touch this parameter if you're not an ITS developer
     ITS->SetThicknessDet1(200.);   // detector thickness on layer 1 must be in the range [100,300]
     ITS->SetThicknessDet2(200.);   // detector thickness on layer 2 must be in the range [100,300]

-    ITS->SetThicknessChip1(200.);  // chip thickness on layer 1 must be in the range [150,300]
-    ITS->SetThicknessChip2(200.);  // chip thickness on layer 2 must be in the range [150,300]
+    ITS->SetThicknessChip1(150.);  // chip thickness on layer 1 must be in the range [150,300]
+    ITS->SetThicknessChip2(150.);  // chip thickness on layer 2 must be in the range [150,300]

     ITS->SetRails(1);             // 1 --> rails in ; 0 --> rails out
     ITS->SetCoolingFluid(1);       // 1 --> water ; 0 --> freon
     //
     ITS->SetRails(1);             // 1 --> rails in ; 0 --> rails out
     ITS->SetCoolingFluid(1);       // 1 --> water ; 0 --> freon
     //

-    //AliITSvPPRsymm *ITS  = new AliITSvPPRsymm("ITS","New ITS PPR detailed version with symmetric services");
-    //ITS->SetMinorVersion(2);                                       // don't touch this parameter if you're not an ITS developer
-    //ITS->SetReadDet(kFALSE);                                       // don't touch this parameter if you're not an ITS developer
-    //ITS->SetWriteDet("$ALICE_ROOT/ITS/ITSgeometry_vPPRsymm2.det"); // don't touch this parameter if you're not an ITS developer
-    //ITS->SetThicknessDet1(300.);   // detector thickness on layer 1 must be in the range [100,300]
-    //ITS->SetThicknessDet2(300.);   // detector thickness on layer 2 must be in the range [100,300]
-    //ITS->SetThicknessChip1(300.);  // chip thickness on layer 1 must be in the range [150,300]
-    //ITS->SetThicknessChip2(300.);  // chip thickness on layer 2 must be in the range [150,300]
-    //ITS->SetRails(1);              // 1 --> rails in ; 0 --> rails out
-    //ITS->SetCoolingFluid(1);       // 1 --> water ; 0 --> freon
-    //

     //
     // Coarse geometries (warning: no hits are produced with these coarse geometries and they unuseful 
     // for reconstruction !):
     //
     // Coarse geometries (warning: no hits are produced with these coarse geometries and they unuseful 
     // for reconstruction !):

diff --git a/macros/ConfigPPR.C b/macros/ConfigPPR.C
index 66d808e0e9f9fafd5f2c05a36fc627d56c04e4e0..c55f45856617a3234020d1f3b1d6d09a715ab851 100644 (file)
--- a/macros/ConfigPPR.C
+++ b/macros/ConfigPPR.C
@@ -381,8 +381,8 @@ void Config()
     //    ITS->SetWriteDet("$ALICE_ROOT/ITS/ITSgeometry_vPPRasymm2.det");  // don't touch this parameter if you're not an ITS developer
        ITS->SetThicknessDet1(200.);   // detector thickness on layer 1 must be in the range [100,300]
        ITS->SetThicknessDet2(200.);   // detector thickness on layer 2 must be in the range [100,300]
     //    ITS->SetWriteDet("$ALICE_ROOT/ITS/ITSgeometry_vPPRasymm2.det");  // don't touch this parameter if you're not an ITS developer
        ITS->SetThicknessDet1(200.);   // detector thickness on layer 1 must be in the range [100,300]
        ITS->SetThicknessDet2(200.);   // detector thickness on layer 2 must be in the range [100,300]

-       ITS->SetThicknessChip1(200.);  // chip thickness on layer 1 must be in the range [150,300]
-       ITS->SetThicknessChip2(200.);  // chip thickness on layer 2 must be in the range [150,300]
+       ITS->SetThicknessChip1(150.);  // chip thickness on layer 1 must be in the range [150,300]
+       ITS->SetThicknessChip2(150.);  // chip thickness on layer 2 must be in the range [150,300]

        ITS->SetRails(0);            // 1 --> rails in ; 0 --> rails out
        ITS->SetCoolingFluid(1);   // 1 --> water ; 0 --> freon
 
        ITS->SetRails(0);            // 1 --> rails in ; 0 --> rails out
        ITS->SetCoolingFluid(1);   // 1 --> water ; 0 --> freon
 

diff --git a/macros/Config_PDC06.C b/macros/Config_PDC06.C
index e258f203bfee88fb52934509a3f71b996d25b4e6..93a291521a3ebd0f4f34c23db0dd569fa29b2aa9 100644 (file)
--- a/macros/Config_PDC06.C
+++ b/macros/Config_PDC06.C
@@ -450,8 +450,8 @@ void Config()
     //    ITS->SetWriteDet("$ALICE_ROOT/ITS/ITSgeometry_vPPRasymm2.det");  // don't touch this parameter if you're not an ITS developer
        ITS->SetThicknessDet1(200.);   // detector thickness on layer 1 must be in the range [100,300]
        ITS->SetThicknessDet2(200.);   // detector thickness on layer 2 must be in the range [100,300]
     //    ITS->SetWriteDet("$ALICE_ROOT/ITS/ITSgeometry_vPPRasymm2.det");  // don't touch this parameter if you're not an ITS developer
        ITS->SetThicknessDet1(200.);   // detector thickness on layer 1 must be in the range [100,300]
        ITS->SetThicknessDet2(200.);   // detector thickness on layer 2 must be in the range [100,300]

-       ITS->SetThicknessChip1(200.);  // chip thickness on layer 1 must be in the range [150,300]
-       ITS->SetThicknessChip2(200.);  // chip thickness on layer 2 must be in the range [150,300]
+       ITS->SetThicknessChip1(150.);  // chip thickness on layer 1 must be in the range [150,300]
+       ITS->SetThicknessChip2(150.);  // chip thickness on layer 2 must be in the range [150,300]

        ITS->SetRails(0);            // 1 --> rails in ; 0 --> rails out
        ITS->SetCoolingFluid(1);   // 1 --> water ; 0 --> freon
 
        ITS->SetRails(0);            // 1 --> rails in ; 0 --> rails out
        ITS->SetCoolingFluid(1);   // 1 --> water ; 0 --> freon
 

diff --git a/macros/Config_PythiaHeavyFlavours.C b/macros/Config_PythiaHeavyFlavours.C
index 2638a4a40b09cd23e821379dda58aedc9b43b585..9e74b0e619148db09a3bb043a5643f637e34afe5 100644 (file)
--- a/macros/Config_PythiaHeavyFlavours.C
+++ b/macros/Config_PythiaHeavyFlavours.C
@@ -400,23 +400,11 @@ void Config()
     ITS->SetWriteDet("$ALICE_ROOT/ITS/ITSgeometry_vPPRasymm2.det");  // don't touch this parameter if you're not an ITS developer
     ITS->SetThicknessDet1(200.);   // detector thickness on layer 1 must be in the range [150,300]
     ITS->SetThicknessDet2(200.);   // detector thickness on layer 2 must be in the range [150,300]
     ITS->SetWriteDet("$ALICE_ROOT/ITS/ITSgeometry_vPPRasymm2.det");  // don't touch this parameter if you're not an ITS developer
     ITS->SetThicknessDet1(200.);   // detector thickness on layer 1 must be in the range [150,300]
     ITS->SetThicknessDet2(200.);   // detector thickness on layer 2 must be in the range [150,300]

-    ITS->SetThicknessChip1(200.);  // chip thickness on layer 1 must be in the range [100,300]
-    ITS->SetThicknessChip2(200.);  // chip thickness on layer 2 must be in the range [100,300]
+    ITS->SetThicknessChip1(150.);  // chip thickness on layer 1 must be in the range [100,300]
+    ITS->SetThicknessChip2(150.);  // chip thickness on layer 2 must be in the range [100,300]

     ITS->SetRails(1);             // 1 --> rails in ; 0 --> rails out
     ITS->SetCoolingFluid(1);       // 1 --> water ; 0 --> freon
     //
     ITS->SetRails(1);             // 1 --> rails in ; 0 --> rails out
     ITS->SetCoolingFluid(1);       // 1 --> water ; 0 --> freon
     //

-    //AliITSvPPRsymm *ITS  = new AliITSvPPRsymm("ITS","New ITS PPR detailed version with symmetric services");
-    //ITS->SetMinorVersion(2);                                       // don't touch this parameter if you're not an ITS developer
-    //ITS->SetReadDet(kFALSE);                                       // don't touch this parameter if you're not an ITS developer
-    //ITS->SetWriteDet("$ALICE_ROOT/ITS/ITSgeometry_vPPRsymm2.det"); // don't touch this parameter if you're not an ITS developer
-    //ITS->SetThicknessDet1(300.);   // detector thickness on layer 1 must be in the range [150,300]
-    //ITS->SetThicknessDet2(300.);   // detector thickness on layer 2 must be in the range [150,300]
-    //ITS->SetThicknessChip1(300.);  // chip thickness on layer 1 must be in the range [100,300]
-    //ITS->SetThicknessChip2(300.);  // chip thickness on layer 2 must be in the range [100,300]
-    //ITS->SetRails(1);              // 1 --> rails in ; 0 --> rails out
-    //ITS->SetCoolingFluid(1);       // 1 --> water ; 0 --> freon
-    //
-    //

     // Coarse geometries (warning: no hits are produced with these coarse geometries and they unuseful 
     // for reconstruction !):
     //                                                     
     // Coarse geometries (warning: no hits are produced with these coarse geometries and they unuseful 
     // for reconstruction !):
     //                                                     

diff --git a/macros/g4ConfigCommon.C b/macros/g4ConfigCommon.C
index a50d964236ae80b8ba208b12dbdb238f5c4aa08e..0e79129e5ea12f11265811be88b3a38bfaf7d4f7 100644 (file)
--- a/macros/g4ConfigCommon.C
+++ b/macros/g4ConfigCommon.C
@@ -228,8 +228,8 @@ void ConfigCommon(Bool_t interactiveSetup)
        //    ITS->SetWriteDet("$ALICE_ROOT/ITS/ITSgeometry_vPPRasymm2.det");  // don't touch this parameter if you're not an ITS developer
        ITS->SetThicknessDet1(200.);   // detector thickness on layer 1 must be in the range [100,300]
        ITS->SetThicknessDet2(200.);   // detector thickness on layer 2 must be in the range [100,300]
        //    ITS->SetWriteDet("$ALICE_ROOT/ITS/ITSgeometry_vPPRasymm2.det");  // don't touch this parameter if you're not an ITS developer
        ITS->SetThicknessDet1(200.);   // detector thickness on layer 1 must be in the range [100,300]
        ITS->SetThicknessDet2(200.);   // detector thickness on layer 2 must be in the range [100,300]

-       ITS->SetThicknessChip1(200.);  // chip thickness on layer 1 must be in the range [150,300]
-       ITS->SetThicknessChip2(200.);  // chip thickness on layer 2 must be in the range [150,300]
+       ITS->SetThicknessChip1(150.);  // chip thickness on layer 1 must be in the range [150,300]
+       ITS->SetThicknessChip2(150.);  // chip thickness on layer 2 must be in the range [150,300]

        ITS->SetRails(0);              // 1 --> rails in ; 0 --> rails out
        ITS->SetCoolingFluid(1);       // 1 --> water ; 0 --> freon
 */
        ITS->SetRails(0);              // 1 --> rails in ; 0 --> rails out
        ITS->SetCoolingFluid(1);       // 1 --> water ; 0 --> freon
 */