--- /dev/null
+// One can use the configuration macro in compiled mode by
+// root [0] gSystem->Load("libgeant321");
+// root [0] gSystem->SetIncludePath("-I$ROOTSYS/include -I$ALICE_ROOT/include\
+// -I$ALICE_ROOT -I$ALICE/geant3/TGeant3");
+// root [0] .x grun.C(1,"ConfigPPR.C++")
+
+#if !defined(__CINT__) || defined(__MAKECINT__)
+#include <Riostream.h>
+#include <TRandom.h>
+#include <TSystem.h>
+#include <TVirtualMC.h>
+#include <TGeant3TGeo.h>
+#include <TPDGCode.h>
+#include <TF1.h>
+#include "STEER/AliRunLoader.h"
+#include "STEER/AliRun.h"
+#include "STEER/AliConfig.h"
+#include "STEER/AliGenerator.h"
+#include "STEER/AliLog.h"
+#include "PYTHIA6/AliDecayerPythia.h"
+#include "EVGEN/AliGenHIJINGpara.h"
+#include "THijing/AliGenHijing.h"
+#include "EVGEN/AliGenCocktail.h"
+#include "EVGEN/AliGenSlowNucleons.h"
+#include "EVGEN/AliSlowNucleonModelExp.h"
+#include "EVGEN/AliGenParam.h"
+#include "EVGEN/AliGenMUONlib.h"
+#include "EVGEN/AliGenSTRANGElib.h"
+#include "EVGEN/AliGenMUONCocktail.h"
+#include "EVGEN/AliGenCocktail.h"
+#include "EVGEN/AliGenGeVSim.h"
+#include "EVGEN/AliGeVSimParticle.h"
+#include "PYTHIA6/AliGenPythia.h"
+#include "STEER/AliMagFMaps.h"
+#include "STRUCT/AliBODY.h"
+#include "STRUCT/AliMAG.h"
+#include "STRUCT/AliABSOv0.h"
+#include "STRUCT/AliDIPOv2.h"
+#include "STRUCT/AliHALL.h"
+#include "STRUCT/AliFRAMEv2.h"
+#include "STRUCT/AliSHILv2.h"
+#include "STRUCT/AliPIPEv0.h"
+#include "ITS/AliITSvPPRasymmFMD.h"
+#include "TPC/AliTPCv2.h"
+#include "TOF/AliTOFv5T0.h"
+#include "HMPID/AliHMPIDv1.h"
+#include "ZDC/AliZDCv2.h"
+#include "TRD/AliTRDv1.h"
+#include "FMD/AliFMDv1.h"
+#include "MUON/AliMUONv1.h"
+#include "PHOS/AliPHOSv1.h"
+#include "PMD/AliPMDv1.h"
+#include "T0/AliT0v1.h"
+#include "EMCAL/AliEMCALv2.h"
+#include "ACORDE/AliACORDEv0.h"
+#include "VZERO/AliVZEROv7.h"
+#endif
+
+enum PprRun_t
+{
+ test50,
+ kParam_8000, kParam_4000, kParam_2000,
+ kHijing_cent1, kHijing_cent2,
+ kHijing_per1, kHijing_per2, kHijing_per3, kHijing_per4, kHijing_per5,
+ kHijing_jj25, kHijing_jj50, kHijing_jj75, kHijing_jj100, kHijing_jj200,
+ kHijing_gj25, kHijing_gj50, kHijing_gj75, kHijing_gj100, kHijing_gj200,
+ kHijing_pA, kPythia6,
+ kPythia6Jets20_24, kPythia6Jets24_29, kPythia6Jets29_35,
+ kPythia6Jets35_42, kPythia6Jets42_50, kPythia6Jets50_60,
+ kPythia6Jets60_72, kPythia6Jets72_86, kPythia6Jets86_104,
+ kPythia6Jets104_125, kPythia6Jets125_150, kPythia6Jets150_180,
+ kD0PbPb5500, kCharmSemiElPbPb5500, kBeautySemiElPbPb5500,
+ kCocktailTRD, kPyJJ, kPyGJ,
+ kMuonCocktailCent1, kMuonCocktailPer1, kMuonCocktailPer4,
+ kMuonCocktailCent1HighPt, kMuonCocktailPer1HighPt, kMuonCocktailPer4HighPt,
+ kMuonCocktailCent1Single, kMuonCocktailPer1Single, kMuonCocktailPer4Single,
+ kFlow_2_2000, kFlow_10_2000, kFlow_6_2000, kFlow_6_5000,
+ kHIJINGplus, kRunMax
+};
+
+const char* pprRunName[] = {
+ "test50",
+ "kParam_8000", "kParam_4000", "kParam_2000",
+ "kHijing_cent1", "kHijing_cent2",
+ "kHijing_per1", "kHijing_per2", "kHijing_per3", "kHijing_per4",
+ "kHijing_per5",
+ "kHijing_jj25", "kHijing_jj50", "kHijing_jj75", "kHijing_jj100",
+ "kHijing_jj200",
+ "kHijing_gj25", "kHijing_gj50", "kHijing_gj75", "kHijing_gj100",
+ "kHijing_gj200", "kHijing_pA", "kPythia6",
+ "kPythia6Jets20_24", "kPythia6Jets24_29", "kPythia6Jets29_35",
+ "kPythia6Jets35_42", "kPythia6Jets42_50", "kPythia6Jets50_60",
+ "kPythia6Jets60_72", "kPythia6Jets72_86", "kPythia6Jets86_104",
+ "kPythia6Jets104_125", "kPythia6Jets125_150", "kPythia6Jets150_180",
+ "kD0PbPb5500", "kCharmSemiElPbPb5500", "kBeautySemiElPbPb5500",
+ "kCocktailTRD", "kPyJJ", "kPyGJ",
+ "kMuonCocktailCent1", "kMuonCocktailPer1", "kMuonCocktailPer4",
+ "kMuonCocktailCent1HighPt", "kMuonCocktailPer1HighPt", "kMuonCocktailPer4HighPt",
+ "kMuonCocktailCent1Single", "kMuonCocktailPer1Single", "kMuonCocktailPer4Single",
+ "kFlow_2_2000", "kFlow_10_2000", "kFlow_6_2000", "kFlow_6_5000", "kHIJINGplus"
+};
+
+enum PprRad_t
+{
+ kGluonRadiation, kNoGluonRadiation
+};
+
+enum PprMag_t
+{
+ k2kG, k4kG, k5kG
+};
+
+enum PprTrigConf_t
+{
+ kDefaultPPTrig, kDefaultPbPbTrig
+};
+
+const char * pprTrigConfName[] = {
+ "p-p","Pb-Pb"
+};
+
+// This part for configuration
+
+static PprRun_t srun = kHijing_per2;
+static PprRad_t srad = kGluonRadiation;
+static PprMag_t smag = k5kG;
+static Int_t sseed = 12345; //Set 0 to use the current time
+static PprTrigConf_t strig = kDefaultPbPbTrig; // default pp trigger configuration
+
+// Comment line
+static TString comment;
+
+// Functions
+Float_t EtaToTheta(Float_t arg);
+AliGenerator* GeneratorFactory(PprRun_t srun);
+AliGenHijing* HijingStandard();
+AliGenGeVSim* GeVSimStandard(Float_t, Float_t);
+void ProcessEnvironmentVars();
+
+void Config()
+{
+ // ThetaRange is (0., 180.). It was (0.28,179.72) 7/12/00 09:00
+ // Theta range given through pseudorapidity limits 22/6/2001
+
+ // Get settings from environment variables
+ ProcessEnvironmentVars();
+
+ // Set Random Number seed
+ gRandom->SetSeed(sseed);
+ cout<<"Seed for random number generation= "<<gRandom->GetSeed()<<endl;
+
+
+ // libraries required by geant321
+#if defined(__CINT__)
+ gSystem->Load("libgeant321");
+#endif
+
+ new TGeant3TGeo("C++ Interface to Geant3");
+
+ // Output every 100 tracks
+ ((TGeant3*)gMC)->SetSWIT(4,100);
+
+ AliRunLoader* rl=0x0;
+
+ AliLog::Message(AliLog::kInfo, "Creating Run Loader", "", "", "Config()"," ConfigPPR.C", __LINE__);
+
+ rl = AliRunLoader::Open("galice.root",
+ AliConfig::GetDefaultEventFolderName(),
+ "recreate");
+ if (rl == 0x0)
+ {
+ gAlice->Fatal("Config.C","Can not instatiate the Run Loader");
+ return;
+ }
+ rl->SetCompressionLevel(2);
+ rl->SetNumberOfEventsPerFile(100);
+ gAlice->SetRunLoader(rl);
+
+ // Set the trigger configuration
+ gAlice->SetTriggerDescriptor(pprTrigConfName[strig]);
+ cout<<"Trigger configuration is set to "<<pprTrigConfName[strig]<<endl;
+
+ //
+ // Set External decayer
+ AliDecayer *decayer = new AliDecayerPythia();
+
+
+ switch (srun) {
+ case kD0PbPb5500:
+ decayer->SetForceDecay(kHadronicD);
+ break;
+ case kCharmSemiElPbPb5500:
+ decayer->SetForceDecay(kSemiElectronic);
+ break;
+ case kBeautySemiElPbPb5500:
+ decayer->SetForceDecay(kSemiElectronic);
+ break;
+ default:
+ decayer->SetForceDecay(kAll);
+ break;
+ }
+ decayer->Init();
+ gMC->SetExternalDecayer(decayer);
+ //
+ //
+ //=======================================================================
+ //
+ //=======================================================================
+ // ************* STEERING parameters FOR ALICE SIMULATION **************
+ // --- Specify event type to be tracked through the ALICE setup
+ // --- All positions are in cm, angles in degrees, and P and E in GeV
+
+ gMC->SetProcess("DCAY",1);
+ gMC->SetProcess("PAIR",1);
+ gMC->SetProcess("COMP",1);
+ gMC->SetProcess("PHOT",1);
+ gMC->SetProcess("PFIS",0);
+ gMC->SetProcess("DRAY",0);
+ gMC->SetProcess("ANNI",1);
+ gMC->SetProcess("BREM",1);
+ gMC->SetProcess("MUNU",1);
+ gMC->SetProcess("CKOV",1);
+ gMC->SetProcess("HADR",1);
+ gMC->SetProcess("LOSS",2);
+ gMC->SetProcess("MULS",1);
+ gMC->SetProcess("RAYL",1);
+
+ Float_t cut = 1.e-3; // 1MeV cut by default
+ Float_t tofmax = 1.e10;
+
+ gMC->SetCut("CUTGAM", cut);
+ gMC->SetCut("CUTELE", cut);
+ gMC->SetCut("CUTNEU", cut);
+ gMC->SetCut("CUTHAD", cut);
+ gMC->SetCut("CUTMUO", cut);
+ gMC->SetCut("BCUTE", cut);
+ gMC->SetCut("BCUTM", cut);
+ gMC->SetCut("DCUTE", cut);
+ gMC->SetCut("DCUTM", cut);
+ gMC->SetCut("PPCUTM", cut);
+ gMC->SetCut("TOFMAX", tofmax);
+
+ // Generator Configuration
+ AliGenerator* gener = GeneratorFactory(srun);
+ gener->SetOrigin(0, 0, 0); // vertex position
+ gener->SetSigma(0, 0, 5.3); // Sigma in (X,Y,Z) (cm) on IP position
+ gener->SetCutVertexZ(1.); // Truncate at 1 sigma
+ gener->SetVertexSmear(kPerEvent);
+ gener->SetTrackingFlag(1);
+ gener->Init();
+
+ if (smag == k2kG) {
+ comment = comment.Append(" | L3 field 0.2 T");
+ } else if (smag == k4kG) {
+ comment = comment.Append(" | L3 field 0.4 T");
+ } else if (smag == k5kG) {
+ comment = comment.Append(" | L3 field 0.5 T");
+ }
+
+
+ if (srad == kGluonRadiation)
+ {
+ comment = comment.Append(" | Gluon Radiation On");
+
+ } else {
+ comment = comment.Append(" | Gluon Radiation Off");
+ }
+
+ printf("\n \n Comment: %s \n \n", comment.Data());
+
+
+// Field
+ AliMagFMaps* field = new AliMagFMaps("Maps","Maps", 2, 1., 10., smag);
+ field->SetL3ConstField(0); //Using const. field in the barrel
+ rl->CdGAFile();
+ gAlice->SetField(field);
+//
+ Int_t iABSO = 1;
+ Int_t iDIPO = 1;
+ Int_t iFMD = 1;
+ Int_t iFRAME = 1;
+ Int_t iHALL = 1;
+ Int_t iITS = 1;
+ Int_t iMAG = 1;
+ Int_t iMUON = 1;
+ Int_t iPHOS = 1;
+ Int_t iPIPE = 1;
+ Int_t iPMD = 1;
+ Int_t iHMPID = 1;
+ Int_t iSHIL = 1;
+ Int_t iT0 = 1;
+ Int_t iTOF = 1;
+ Int_t iTPC = 1;
+ Int_t iTRD = 1;
+ Int_t iZDC = 1;
+ Int_t iEMCAL = 1;
+ Int_t iVZERO = 1;
+ Int_t iACORDE = 0;
+
+ //=================== Alice BODY parameters =============================
+ AliBODY *BODY = new AliBODY("BODY", "Alice envelop");
+
+
+ if (iMAG)
+ {
+ //=================== MAG parameters ============================
+ // --- Start with Magnet since detector layouts may be depending ---
+ // --- on the selected Magnet dimensions ---
+ AliMAG *MAG = new AliMAG("MAG", "Magnet");
+ }
+
+
+ if (iABSO)
+ {
+ //=================== ABSO parameters ============================
+ AliABSO *ABSO = new AliABSOv0("ABSO", "Muon Absorber");
+ }
+
+ if (iDIPO)
+ {
+ //=================== DIPO parameters ============================
+
+ AliDIPO *DIPO = new AliDIPOv2("DIPO", "Dipole version 2");
+ }
+
+ if (iHALL)
+ {
+ //=================== HALL parameters ============================
+
+ AliHALL *HALL = new AliHALL("HALL", "Alice Hall");
+ }
+
+
+ if (iFRAME)
+ {
+ //=================== FRAME parameters ============================
+
+ AliFRAMEv2 *FRAME = new AliFRAMEv2("FRAME", "Space Frame");
+ }
+
+ if (iSHIL)
+ {
+ //=================== SHIL parameters ============================
+
+ AliSHIL *SHIL = new AliSHILv2("SHIL", "Shielding Version 2");
+ }
+
+
+ if (iPIPE)
+ {
+ //=================== PIPE parameters ============================
+
+ AliPIPE *PIPE = new AliPIPEv0("PIPE", "Beam Pipe");
+ }
+
+ if(iITS) {
+
+ //=================== ITS parameters ============================
+ //
+ // As the innermost detector in ALICE, the Inner Tracking System "impacts" on
+ // almost all other detectors. This involves the fact that the ITS geometry
+ // still has several options to be followed in parallel in order to determine
+ // the best set-up which minimizes the induced background. All the geometries
+ // available to date are described in the following. Read carefully the comments
+ // and use the default version (the only one uncommented) unless you are making
+ // comparisons and you know what you are doing. In this case just uncomment the
+ // ITS geometry you want to use and run Aliroot.
+ //
+ // Detailed geometries:
+ //
+ //
+ //AliITS *ITS = new AliITSv5symm("ITS","Updated ITS TDR detailed version with symmetric services");
+ //
+ //AliITS *ITS = new AliITSv5asymm("ITS","Updates ITS TDR detailed version with asymmetric services");
+ //
+ AliITSvPPRasymmFMD *ITS = new AliITSvPPRasymmFMD("ITS","New ITS PPR detailed version with asymmetric services");
+ ITS->SetMinorVersion(2); // don't touch this parameter if you're not an ITS developer
+ ITS->SetReadDet(kFALSE); // don't touch this parameter if you're not an ITS developer
+ // ITS->SetWriteDet("$ALICE_ROOT/ITS/ITSgeometry_vPPRasymm2.det"); // don't touch this parameter if you're not an ITS developer
+ ITS->SetThicknessDet1(200.); // detector thickness on layer 1 must be in the range [100,300]
+ ITS->SetThicknessDet2(200.); // detector thickness on layer 2 must be in the range [100,300]
+ ITS->SetThicknessChip1(150.); // chip thickness on layer 1 must be in the range [150,300]
+ ITS->SetThicknessChip2(150.); // chip thickness on layer 2 must be in the range [150,300]
+ ITS->SetRails(0); // 1 --> rails in ; 0 --> rails out
+ ITS->SetCoolingFluid(1); // 1 --> water ; 0 --> freon
+
+ // Coarse geometries (warning: no hits are produced with these coarse geometries and they unuseful
+ // for reconstruction !):
+ //
+ //
+ //AliITSvPPRcoarseasymm *ITS = new AliITSvPPRcoarseasymm("ITS","New ITS PPR coarse version with asymmetric services");
+ //ITS->SetRails(0); // 1 --> rails in ; 0 --> rails out
+ //ITS->SetSupportMaterial(0); // 0 --> Copper ; 1 --> Aluminum ; 2 --> Carbon
+ //
+ //AliITS *ITS = new AliITSvPPRcoarsesymm("ITS","New ITS PPR coarse version with symmetric services");
+ //ITS->SetRails(0); // 1 --> rails in ; 0 --> rails out
+ //ITS->SetSupportMaterial(0); // 0 --> Copper ; 1 --> Aluminum ; 2 --> Carbon
+ //
+ //
+ //
+ // Geant3 <-> EUCLID conversion
+ // ============================
+ //
+ // SetEUCLID is a flag to output (=1) or not to output (=0) both geometry and
+ // media to two ASCII files (called by default ITSgeometry.euc and
+ // ITSgeometry.tme) in a format understandable to the CAD system EUCLID.
+ // The default (=0) means that you dont want to use this facility.
+ //
+ ITS->SetEUCLID(0);
+ }
+
+ if (iTPC)
+ {
+ //============================ TPC parameters =====================
+ AliTPC *TPC = new AliTPCv2("TPC", "Default");
+ }
+
+
+ if (iTOF) {
+ //=================== TOF parameters ============================
+ AliTOF *TOF = new AliTOFv5T0("TOF", "normal TOF");
+ }
+
+
+ if (iHMPID)
+ {
+ //=================== HMPID parameters ===========================
+ AliHMPID *HMPID = new AliHMPIDv1("HMPID", "normal HMPID");
+
+ }
+
+
+ if (iZDC)
+ {
+ //=================== ZDC parameters ============================
+
+ AliZDC *ZDC = new AliZDCv2("ZDC", "normal ZDC");
+ }
+
+ if (iTRD)
+ {
+ //=================== TRD parameters ============================
+
+ AliTRD *TRD = new AliTRDv1("TRD", "TRD slow simulator");
+ }
+
+ if (iFMD)
+ {
+ //=================== FMD parameters ============================
+ AliFMD *FMD = new AliFMDv1("FMD", "normal FMD");
+ }
+
+ if (iMUON)
+ {
+ //=================== MUON parameters ===========================
+ // New MUONv1 version (geometry defined via builders)
+ AliMUON *MUON = new AliMUONv1("MUON", "default");
+ }
+ //=================== PHOS parameters ===========================
+
+ if (iPHOS)
+ {
+ AliPHOS *PHOS = new AliPHOSv1("PHOS", "IHEP");
+ }
+
+
+ if (iPMD)
+ {
+ //=================== PMD parameters ============================
+ AliPMD *PMD = new AliPMDv1("PMD", "normal PMD");
+ }
+
+ if (iT0)
+ {
+ //=================== T0 parameters ============================
+ AliT0 *T0 = new AliT0v1("T0", "T0 Detector");
+ }
+
+ if (iEMCAL)
+ {
+ //=================== EMCAL parameters ============================
+ AliEMCAL *EMCAL = new AliEMCALv2("EMCAL", "SHISH_77_TRD1_2X2_FINAL_110DEG");
+ }
+
+ if (iACORDE)
+ {
+ //=================== ACORDE parameters ============================
+ AliACORDE *ACORDE = new AliACORDEv0("ACORDE", "normal ACORDE");
+ }
+
+ if (iVZERO)
+ {
+ //=================== VZERO parameters ============================
+ AliVZERO *VZERO = new AliVZEROv7("VZERO", "normal VZERO");
+ }
+
+
+}
+
+Float_t EtaToTheta(Float_t arg){
+ return (180./TMath::Pi())*2.*atan(exp(-arg));
+}
+
+
+
+AliGenerator* GeneratorFactory(PprRun_t srun) {
+ Int_t isw = 3;
+ if (srad == kNoGluonRadiation) isw = 0;
+
+
+ AliGenerator * gGener = 0x0;
+ switch (srun) {
+ case test50:
+ {
+ comment = comment.Append(":HIJINGparam test 50 particles");
+ AliGenHIJINGpara *gener = new AliGenHIJINGpara(50);
+ gener->SetMomentumRange(0, 999999.);
+ gener->SetPhiRange(0., 360.);
+ // Set pseudorapidity range from -8 to 8.
+ Float_t thmin = EtaToTheta(8); // theta min. <---> eta max
+ Float_t thmax = EtaToTheta(-8); // theta max. <---> eta min
+ gener->SetThetaRange(thmin,thmax);
+ gGener=gener;
+ }
+ break;
+ case kParam_8000:
+ {
+ comment = comment.Append(":HIJINGparam N=8000");
+ AliGenHIJINGpara *gener = new AliGenHIJINGpara(86030);
+ gener->SetMomentumRange(0, 999999.);
+ gener->SetPhiRange(0., 360.);
+ // Set pseudorapidity range from -8 to 8.
+ Float_t thmin = EtaToTheta(8); // theta min. <---> eta max
+ Float_t thmax = EtaToTheta(-8); // theta max. <---> eta min
+ gener->SetThetaRange(thmin,thmax);
+ gGener=gener;
+ }
+ break;
+ case kParam_4000:
+ {
+ comment = comment.Append("HIJINGparam N=4000");
+ AliGenHIJINGpara *gener = new AliGenHIJINGpara(43015);
+ gener->SetMomentumRange(0, 999999.);
+ gener->SetPhiRange(0., 360.);
+ // Set pseudorapidity range from -8 to 8.
+ Float_t thmin = EtaToTheta(8); // theta min. <---> eta max
+ Float_t thmax = EtaToTheta(-8); // theta max. <---> eta min
+ gener->SetThetaRange(thmin,thmax);
+ gGener=gener;
+ }
+ break;
+ case kParam_2000:
+ {
+ comment = comment.Append("HIJINGparam N=2000");
+ AliGenHIJINGpara *gener = new AliGenHIJINGpara(21507);
+ gener->SetMomentumRange(0, 999999.);
+ gener->SetPhiRange(0., 360.);
+ // Set pseudorapidity range from -8 to 8.
+ Float_t thmin = EtaToTheta(8); // theta min. <---> eta max
+ Float_t thmax = EtaToTheta(-8); // theta max. <---> eta min
+ gener->SetThetaRange(thmin,thmax);
+ gGener=gener;
+ }
+ break;
+//
+// Hijing Central
+//
+ case kHijing_cent1:
+ {
+ comment = comment.Append("HIJING cent1");
+ AliGenHijing *gener = HijingStandard();
+// impact parameter range
+ gener->SetImpactParameterRange(0., 5.);
+ gGener=gener;
+ }
+ break;
+ case kHijing_cent2:
+ {
+ comment = comment.Append("HIJING cent2");
+ AliGenHijing *gener = HijingStandard();
+// impact parameter range
+ gener->SetImpactParameterRange(0., 2.);
+ gGener=gener;
+ }
+ break;
+//
+// Hijing Peripheral
+//
+ case kHijing_per1:
+ {
+ comment = comment.Append("HIJING per1");
+ AliGenHijing *gener = HijingStandard();
+// impact parameter range
+ gener->SetImpactParameterRange(5., 8.6);
+ gGener=gener;
+ }
+ break;
+ case kHijing_per2:
+ {
+ comment = comment.Append("HIJING per2");
+ AliGenHijing *gener = HijingStandard();
+// impact parameter range
+ gener->SetImpactParameterRange(8.6, 11.2);
+ gGener=gener;
+ }
+ break;
+ case kHijing_per3:
+ {
+ comment = comment.Append("HIJING per3");
+ AliGenHijing *gener = HijingStandard();
+// impact parameter range
+ gener->SetImpactParameterRange(11.2, 13.2);
+ gGener=gener;
+ }
+ break;
+ case kHijing_per4:
+ {
+ comment = comment.Append("HIJING per4");
+ AliGenHijing *gener = HijingStandard();
+// impact parameter range
+ gener->SetImpactParameterRange(13.2, 15.);
+ gGener=gener;
+ }
+ break;
+ case kHijing_per5:
+ {
+ comment = comment.Append("HIJING per5");
+ AliGenHijing *gener = HijingStandard();
+// impact parameter range
+ gener->SetImpactParameterRange(15., 100.);
+ gGener=gener;
+ }
+ break;
+//
+// Jet-Jet
+//
+ case kHijing_jj25:
+ {
+ comment = comment.Append("HIJING Jet 25 GeV");
+ AliGenHijing *gener = HijingStandard();
+// impact parameter range
+ gener->SetImpactParameterRange(0., 5.);
+ // trigger
+ gener->SetTrigger(1);
+ gener->SetPtJet(25.);
+ gener->SetRadiation(isw);
+ gener->SetSimpleJets(!isw);
+ gener->SetJetEtaRange(-0.3,0.3);
+ gener->SetJetPhiRange(75., 165.);
+ gGener=gener;
+ }
+ break;
+
+ case kHijing_jj50:
+ {
+ comment = comment.Append("HIJING Jet 50 GeV");
+ AliGenHijing *gener = HijingStandard();
+// impact parameter range
+ gener->SetImpactParameterRange(0., 5.);
+ // trigger
+ gener->SetTrigger(1);
+ gener->SetPtJet(50.);
+ gener->SetRadiation(isw);
+ gener->SetSimpleJets(!isw);
+ gener->SetJetEtaRange(-0.3,0.3);
+ gener->SetJetPhiRange(75., 165.);
+ gGener=gener;
+ }
+ break;
+
+ case kHijing_jj75:
+ {
+ comment = comment.Append("HIJING Jet 75 GeV");
+ AliGenHijing *gener = HijingStandard();
+// impact parameter range
+ gener->SetImpactParameterRange(0., 5.);
+ // trigger
+ gener->SetTrigger(1);
+ gener->SetPtJet(75.);
+ gener->SetRadiation(isw);
+ gener->SetSimpleJets(!isw);
+ gener->SetJetEtaRange(-0.3,0.3);
+ gener->SetJetPhiRange(75., 165.);
+ gGener=gener;
+ }
+ break;
+
+ case kHijing_jj100:
+ {
+ comment = comment.Append("HIJING Jet 100 GeV");
+ AliGenHijing *gener = HijingStandard();
+// impact parameter range
+ gener->SetImpactParameterRange(0., 5.);
+ // trigger
+ gener->SetTrigger(1);
+ gener->SetPtJet(100.);
+ gener->SetRadiation(isw);
+ gener->SetSimpleJets(!isw);
+ gener->SetJetEtaRange(-0.3,0.3);
+ gener->SetJetPhiRange(75., 165.);
+ gGener=gener;
+ }
+ break;
+
+ case kHijing_jj200:
+ {
+ comment = comment.Append("HIJING Jet 200 GeV");
+ AliGenHijing *gener = HijingStandard();
+// impact parameter range
+ gener->SetImpactParameterRange(0., 5.);
+ // trigger
+ gener->SetTrigger(1);
+ gener->SetPtJet(200.);
+ gener->SetRadiation(isw);
+ gener->SetSimpleJets(!isw);
+ gener->SetJetEtaRange(-0.3,0.3);
+ gener->SetJetPhiRange(75., 165.);
+ gGener=gener;
+ }
+ break;
+//
+// Gamma-Jet
+//
+ case kHijing_gj25:
+ {
+ comment = comment.Append("HIJING Gamma 25 GeV");
+ AliGenHijing *gener = HijingStandard();
+// impact parameter range
+ gener->SetImpactParameterRange(0., 5.);
+ // trigger
+ gener->SetTrigger(2);
+ gener->SetPtJet(25.);
+ gener->SetRadiation(isw);
+ gener->SetSimpleJets(!isw);
+ gener->SetJetEtaRange(-0.12, 0.12);
+ gener->SetJetPhiRange(220., 320.);
+ gGener=gener;
+ }
+ break;
+
+ case kHijing_gj50:
+ {
+ comment = comment.Append("HIJING Gamma 50 GeV");
+ AliGenHijing *gener = HijingStandard();
+// impact parameter range
+ gener->SetImpactParameterRange(0., 5.);
+ // trigger
+ gener->SetTrigger(2);
+ gener->SetPtJet(50.);
+ gener->SetRadiation(isw);
+ gener->SetSimpleJets(!isw);
+ gener->SetJetEtaRange(-0.12, 0.12);
+ gener->SetJetPhiRange(220., 320.);
+ gGener=gener;
+ }
+ break;
+
+ case kHijing_gj75:
+ {
+ comment = comment.Append("HIJING Gamma 75 GeV");
+ AliGenHijing *gener = HijingStandard();
+// impact parameter range
+ gener->SetImpactParameterRange(0., 5.);
+ // trigger
+ gener->SetTrigger(2);
+ gener->SetPtJet(75.);
+ gener->SetRadiation(isw);
+ gener->SetSimpleJets(!isw);
+ gener->SetJetEtaRange(-0.12, 0.12);
+ gener->SetJetPhiRange(220., 320.);
+ gGener=gener;
+ }
+ break;
+
+ case kHijing_gj100:
+ {
+ comment = comment.Append("HIJING Gamma 100 GeV");
+ AliGenHijing *gener = HijingStandard();
+// impact parameter range
+ gener->SetImpactParameterRange(0., 5.);
+ // trigger
+ gener->SetTrigger(2);
+ gener->SetPtJet(100.);
+ gener->SetRadiation(isw);
+ gener->SetSimpleJets(!isw);
+ gener->SetJetEtaRange(-0.12, 0.12);
+ gener->SetJetPhiRange(220., 320.);
+ gGener=gener;
+ }
+ break;
+
+ case kHijing_gj200:
+ {
+ comment = comment.Append("HIJING Gamma 200 GeV");
+ AliGenHijing *gener = HijingStandard();
+// impact parameter range
+ gener->SetImpactParameterRange(0., 5.);
+ // trigger
+ gener->SetTrigger(2);
+ gener->SetPtJet(200.);
+ gener->SetRadiation(isw);
+ gener->SetSimpleJets(!isw);
+ gener->SetJetEtaRange(-0.12, 0.12);
+ gener->SetJetPhiRange(220., 320.);
+ gGener=gener;
+ }
+ break;
+ case kHijing_pA:
+ {
+ comment = comment.Append("HIJING pA");
+
+ AliGenCocktail *gener = new AliGenCocktail();
+
+ AliGenHijing *hijing = new AliGenHijing(-1);
+// centre of mass energy
+ hijing->SetEnergyCMS(TMath::Sqrt(82./208.) * 14000.);
+// impact parameter range
+ hijing->SetImpactParameterRange(0., 15.);
+// reference frame
+ hijing->SetReferenceFrame("CMS");
+ hijing->SetBoostLHC(1);
+// projectile
+ hijing->SetProjectile("P", 1, 1);
+ hijing->SetTarget ("A", 208, 82);
+// tell hijing to keep the full parent child chain
+ hijing->KeepFullEvent();
+// enable jet quenching
+ hijing->SetJetQuenching(0);
+// enable shadowing
+ hijing->SetShadowing(1);
+// Don't track spectators
+ hijing->SetSpectators(0);
+// kinematic selection
+ hijing->SetSelectAll(0);
+//
+ AliGenSlowNucleons* gray = new AliGenSlowNucleons(1);
+ AliSlowNucleonModel* model = new AliSlowNucleonModelExp();
+ gray->SetSlowNucleonModel(model);
+ gray->SetDebug(1);
+ gener->AddGenerator(hijing,"Hijing pPb", 1);
+ gener->AddGenerator(gray, "Gray Particles",1);
+ gGener=gener;
+ }
+ break;
+ case kPythia6:
+ {
+ comment = comment.Append(":Pythia p-p @ 14 TeV");
+ AliGenPythia *gener = new AliGenPythia(-1);
+ gener->SetMomentumRange(0,999999);
+ gener->SetThetaRange(0., 180.);
+ gener->SetYRange(-12,12);
+ gener->SetPtRange(0,1000);
+ gener->SetProcess(kPyMb);
+ gener->SetEnergyCMS(14000.);
+ gGener=gener;
+ }
+ break;
+ case kPythia6Jets20_24:
+ {
+ comment = comment.Append(":Pythia jets 20-24 GeV @ 5.5 TeV");
+ AliGenPythia * gener = new AliGenPythia(-1);
+ gener->SetEnergyCMS(5500.);// Centre of mass energy
+ gener->SetProcess(kPyJets);// Process type
+ gener->SetJetEtaRange(-0.5, 0.5);// Final state kinematic cuts
+ gener->SetJetPhiRange(0., 360.);
+ gener->SetJetEtRange(10., 1000.);
+ gener->SetGluonRadiation(1,1);
+ // gener->SetPtKick(0.);
+ // Structure function
+ gener->SetStrucFunc(kCTEQ4L);
+ gener->SetPtHard(20., 24.);// Pt transfer of the hard scattering
+ gener->SetPycellParameters(2., 274, 432, 0., 4., 5., 1.0);
+ gener->SetForceDecay(kAll);// Decay type (semielectronic, etc.)
+ gGener=gener;
+ }
+ break;
+ case kPythia6Jets24_29:
+ {
+ comment = comment.Append(":Pythia jets 24-29 GeV @ 5.5 TeV");
+ AliGenPythia * gener = new AliGenPythia(-1);
+ gener->SetEnergyCMS(5500.);// Centre of mass energy
+ gener->SetProcess(kPyJets);// Process type
+ gener->SetJetEtaRange(-0.5, 0.5);// Final state kinematic cuts
+ gener->SetJetPhiRange(0., 360.);
+ gener->SetJetEtRange(10., 1000.);
+ gener->SetGluonRadiation(1,1);
+ // gener->SetPtKick(0.);
+ // Structure function
+ gener->SetStrucFunc(kCTEQ4L);
+ gener->SetPtHard(24., 29.);// Pt transfer of the hard scattering
+ gener->SetPycellParameters(2., 274, 432, 0., 4., 5., 1.0);
+ gener->SetForceDecay(kAll);// Decay type (semielectronic, etc.)
+ gGener=gener;
+ }
+ break;
+ case kPythia6Jets29_35:
+ {
+ comment = comment.Append(":Pythia jets 29-35 GeV @ 5.5 TeV");
+ AliGenPythia * gener = new AliGenPythia(-1);
+ gener->SetEnergyCMS(5500.);// Centre of mass energy
+ gener->SetProcess(kPyJets);// Process type
+ gener->SetJetEtaRange(-0.5, 0.5);// Final state kinematic cuts
+ gener->SetJetPhiRange(0., 360.);
+ gener->SetJetEtRange(10., 1000.);
+ gener->SetGluonRadiation(1,1);
+ // gener->SetPtKick(0.);
+ // Structure function
+ gener->SetStrucFunc(kCTEQ4L);
+ gener->SetPtHard(29., 35.);// Pt transfer of the hard scattering
+ gener->SetPycellParameters(2., 274, 432, 0., 4., 5., 1.0);
+ gener->SetForceDecay(kAll);// Decay type (semielectronic, etc.)
+ gGener=gener;
+ }
+ break;
+ case kPythia6Jets35_42:
+ {
+ comment = comment.Append(":Pythia jets 35-42 GeV @ 5.5 TeV");
+ AliGenPythia * gener = new AliGenPythia(-1);
+ gener->SetEnergyCMS(5500.);// Centre of mass energy
+ gener->SetProcess(kPyJets);// Process type
+ gener->SetJetEtaRange(-0.5, 0.5);// Final state kinematic cuts
+ gener->SetJetPhiRange(0., 360.);
+ gener->SetJetEtRange(10., 1000.);
+ gener->SetGluonRadiation(1,1);
+ // gener->SetPtKick(0.);
+ // Structure function
+ gener->SetStrucFunc(kCTEQ4L);
+ gener->SetPtHard(35., 42.);// Pt transfer of the hard scattering
+ gener->SetPycellParameters(2., 274, 432, 0., 4., 5., 1.0);
+ gener->SetForceDecay(kAll);// Decay type (semielectronic, etc.)
+ gGener=gener;
+ }
+ break;
+ case kPythia6Jets42_50:
+ {
+ comment = comment.Append(":Pythia jets 42-50 GeV @ 5.5 TeV");
+ AliGenPythia * gener = new AliGenPythia(-1);
+ gener->SetEnergyCMS(5500.);// Centre of mass energy
+ gener->SetProcess(kPyJets);// Process type
+ gener->SetJetEtaRange(-0.5, 0.5);// Final state kinematic cuts
+ gener->SetJetPhiRange(0., 360.);
+ gener->SetJetEtRange(10., 1000.);
+ gener->SetGluonRadiation(1,1);
+ // gener->SetPtKick(0.);
+ // Structure function
+ gener->SetStrucFunc(kCTEQ4L);
+ gener->SetPtHard(42., 50.);// Pt transfer of the hard scattering
+ gener->SetPycellParameters(2., 274, 432, 0., 4., 5., 1.0);
+ gener->SetForceDecay(kAll);// Decay type (semielectronic, etc.)
+ gGener=gener;
+ }
+ break;
+ case kPythia6Jets50_60:
+ {
+ comment = comment.Append(":Pythia jets 50-60 GeV @ 5.5 TeV");
+ AliGenPythia * gener = new AliGenPythia(-1);
+ gener->SetEnergyCMS(5500.);// Centre of mass energy
+ gener->SetProcess(kPyJets);// Process type
+ gener->SetJetEtaRange(-0.5, 0.5);// Final state kinematic cuts
+ gener->SetJetPhiRange(0., 360.);
+ gener->SetJetEtRange(10., 1000.);
+ gener->SetGluonRadiation(1,1);
+ // gener->SetPtKick(0.);
+ // Structure function
+ gener->SetStrucFunc(kCTEQ4L);
+ gener->SetPtHard(50., 60.);// Pt transfer of the hard scattering
+ gener->SetPycellParameters(2., 274, 432, 0., 4., 5., 1.0);
+ gener->SetForceDecay(kAll);// Decay type (semielectronic, etc.)
+ gGener=gener;
+ }
+ break;
+ case kPythia6Jets60_72:
+ {
+ comment = comment.Append(":Pythia jets 60-72 GeV @ 5.5 TeV");
+ AliGenPythia * gener = new AliGenPythia(-1);
+ gener->SetEnergyCMS(5500.);// Centre of mass energy
+ gener->SetProcess(kPyJets);// Process type
+ gener->SetJetEtaRange(-0.5, 0.5);// Final state kinematic cuts
+ gener->SetJetPhiRange(0., 360.);
+ gener->SetJetEtRange(10., 1000.);
+ gener->SetGluonRadiation(1,1);
+ // gener->SetPtKick(0.);
+ // Structure function
+ gener->SetStrucFunc(kCTEQ4L);
+ gener->SetPtHard(60., 72.);// Pt transfer of the hard scattering
+ gener->SetPycellParameters(2., 274, 432, 0., 4., 5., 1.0);
+ gener->SetForceDecay(kAll);// Decay type (semielectronic, etc.)
+ gGener=gener;
+ }
+ break;
+ case kPythia6Jets72_86:
+ {
+ comment = comment.Append(":Pythia jets 72-86 GeV @ 5.5 TeV");
+ AliGenPythia * gener = new AliGenPythia(-1);
+ gener->SetEnergyCMS(5500.);// Centre of mass energy
+ gener->SetProcess(kPyJets);// Process type
+ gener->SetJetEtaRange(-0.5, 0.5);// Final state kinematic cuts
+ gener->SetJetPhiRange(0., 360.);
+ gener->SetJetEtRange(10., 1000.);
+ gener->SetGluonRadiation(1,1);
+ // gener->SetPtKick(0.);
+ // Structure function
+ gener->SetStrucFunc(kCTEQ4L);
+ gener->SetPtHard(72., 86.);// Pt transfer of the hard scattering
+ gener->SetPycellParameters(2., 274, 432, 0., 4., 5., 1.0);
+ gener->SetForceDecay(kAll);// Decay type (semielectronic, etc.)
+ gGener=gener;
+ }
+ break;
+ case kPythia6Jets86_104:
+ {
+ comment = comment.Append(":Pythia jets 86-104 GeV @ 5.5 TeV");
+ AliGenPythia * gener = new AliGenPythia(-1);
+ gener->SetEnergyCMS(5500.);// Centre of mass energy
+ gener->SetProcess(kPyJets);// Process type
+ gener->SetJetEtaRange(-0.5, 0.5);// Final state kinematic cuts
+ gener->SetJetPhiRange(0., 360.);
+ gener->SetJetEtRange(10., 1000.);
+ gener->SetGluonRadiation(1,1);
+ // gener->SetPtKick(0.);
+ // Structure function
+ gener->SetStrucFunc(kCTEQ4L);
+ gener->SetPtHard(86., 104.);// Pt transfer of the hard scattering
+ gener->SetPycellParameters(2., 274, 432, 0., 4., 5., 1.0);
+ gener->SetForceDecay(kAll);// Decay type (semielectronic, etc.)
+ gGener=gener;
+ }
+ break;
+ case kPythia6Jets104_125:
+ {
+ comment = comment.Append(":Pythia jets 105-125 GeV @ 5.5 TeV");
+ AliGenPythia * gener = new AliGenPythia(-1);
+ gener->SetEnergyCMS(5500.);// Centre of mass energy
+ gener->SetProcess(kPyJets);// Process type
+ gener->SetJetEtaRange(-0.5, 0.5);// Final state kinematic cuts
+ gener->SetJetPhiRange(0., 360.);
+ gener->SetJetEtRange(10., 1000.);
+ gener->SetGluonRadiation(1,1);
+ // gener->SetPtKick(0.);
+ // Structure function
+ gener->SetStrucFunc(kCTEQ4L);
+ gener->SetPtHard(104., 125.);// Pt transfer of the hard scattering
+ gener->SetPycellParameters(2., 274, 432, 0., 4., 5., 1.0);
+ gener->SetForceDecay(kAll);// Decay type (semielectronic, etc.)
+ gGener=gener;
+ }
+ break;
+ case kPythia6Jets125_150:
+ {
+ comment = comment.Append(":Pythia jets 125-150 GeV @ 5.5 TeV");
+ AliGenPythia * gener = new AliGenPythia(-1);
+ gener->SetEnergyCMS(5500.);// Centre of mass energy
+ gener->SetProcess(kPyJets);// Process type
+ gener->SetJetEtaRange(-0.5, 0.5);// Final state kinematic cuts
+ gener->SetJetPhiRange(0., 360.);
+ gener->SetJetEtRange(10., 1000.);
+ gener->SetGluonRadiation(1,1);
+ // gener->SetPtKick(0.);
+ // Structure function
+ gener->SetStrucFunc(kCTEQ4L);
+ gener->SetPtHard(125., 150.);// Pt transfer of the hard scattering
+ gener->SetPycellParameters(2., 274, 432, 0., 4., 5., 1.0);
+ gener->SetForceDecay(kAll);// Decay type (semielectronic, etc.)
+ gGener=gener;
+ }
+ break;
+ case kPythia6Jets150_180:
+ {
+ comment = comment.Append(":Pythia jets 150-180 GeV @ 5.5 TeV");
+ AliGenPythia * gener = new AliGenPythia(-1);
+ gener->SetEnergyCMS(5500.);// Centre of mass energy
+ gener->SetProcess(kPyJets);// Process type
+ gener->SetJetEtaRange(-0.5, 0.5);// Final state kinematic cuts
+ gener->SetJetPhiRange(0., 360.);
+ gener->SetJetEtRange(10., 1000.);
+ gener->SetGluonRadiation(1,1);
+ // gener->SetPtKick(0.);
+ // Structure function
+ gener->SetStrucFunc(kCTEQ4L);
+ gener->SetPtHard(150., 180.);// Pt transfer of the hard scattering
+ gener->SetPycellParameters(2., 274, 432, 0., 4., 5., 1.0);
+ gener->SetForceDecay(kAll);// Decay type (semielectronic, etc.)
+ gGener=gener;
+ }
+ break;
+ case kD0PbPb5500:
+ {
+ comment = comment.Append(" D0 in Pb-Pb at 5.5 TeV");
+ AliGenPythia * gener = new AliGenPythia(10);
+ gener->SetProcess(kPyD0PbPbMNR);
+ gener->SetStrucFunc(kCTEQ4L);
+ gener->SetPtHard(2.1,-1.0);
+ gener->SetEnergyCMS(5500.);
+ gener->SetNuclei(208,208);
+ gener->SetForceDecay(kHadronicD);
+ gener->SetYRange(-2,2);
+ gener->SetFeedDownHigherFamily(kFALSE);
+ gener->SetStackFillOpt(AliGenPythia::kParentSelection);
+ gener->SetCountMode(AliGenPythia::kCountParents);
+ gGener=gener;
+ }
+ break;
+ case kCharmSemiElPbPb5500:
+ {
+ comment = comment.Append(" Charm in Pb-Pb at 5.5 TeV");
+ AliGenPythia * gener = new AliGenPythia(10);
+ gener->SetProcess(kPyCharmPbPbMNR);
+ gener->SetStrucFunc(kCTEQ4L);
+ gener->SetPtHard(2.1,-1.0);
+ gener->SetEnergyCMS(5500.);
+ gener->SetNuclei(208,208);
+ gener->SetForceDecay(kSemiElectronic);
+ gener->SetYRange(-2,2);
+ gener->SetFeedDownHigherFamily(kFALSE);
+ gener->SetCountMode(AliGenPythia::kCountParents);
+ gGener=gener;
+ }
+ break;
+ case kBeautySemiElPbPb5500:
+ {
+ comment = comment.Append(" Beauty in Pb-Pb at 5.5 TeV");
+ AliGenPythia *gener = new AliGenPythia(10);
+ gener->SetProcess(kPyBeautyPbPbMNR);
+ gener->SetStrucFunc(kCTEQ4L);
+ gener->SetPtHard(2.75,-1.0);
+ gener->SetEnergyCMS(5500.);
+ gener->SetNuclei(208,208);
+ gener->SetForceDecay(kSemiElectronic);
+ gener->SetYRange(-2,2);
+ gener->SetFeedDownHigherFamily(kFALSE);
+ gener->SetCountMode(AliGenPythia::kCountParents);
+ gGener=gener;
+ }
+ break;
+ case kCocktailTRD:
+ {
+ comment = comment.Append(" Cocktail for TRD at 5.5 TeV");
+ AliGenCocktail *gener = new AliGenCocktail();
+
+ AliGenParam *phi = new AliGenParam(10,
+ new AliGenMUONlib(),
+ AliGenMUONlib::kPhi,
+ "Vogt PbPb");
+
+ phi->SetPtRange(0, 100);
+ phi->SetYRange(-1., +1.);
+ phi->SetForceDecay(kDiElectron);
+
+ AliGenParam *omega = new AliGenParam(10,
+ new AliGenMUONlib(),
+ AliGenMUONlib::kOmega,
+ "Vogt PbPb");
+
+ omega->SetPtRange(0, 100);
+ omega->SetYRange(-1., +1.);
+ omega->SetForceDecay(kDiElectron);
+
+ AliGenParam *jpsi = new AliGenParam(10,
+ new AliGenMUONlib(),
+ AliGenMUONlib::kJpsiFamily,
+ "Vogt PbPb");
+
+ jpsi->SetPtRange(0, 100);
+ jpsi->SetYRange(-1., +1.);
+ jpsi->SetForceDecay(kDiElectron);
+
+ AliGenParam *ups = new AliGenParam(10,
+ new AliGenMUONlib(),
+ AliGenMUONlib::kUpsilonFamily,
+ "Vogt PbPb");
+ ups->SetPtRange(0, 100);
+ ups->SetYRange(-1., +1.);
+ ups->SetForceDecay(kDiElectron);
+
+ AliGenParam *charm = new AliGenParam(10,
+ new AliGenMUONlib(),
+ AliGenMUONlib::kCharm,
+ "central");
+ charm->SetPtRange(0, 100);
+ charm->SetYRange(-1.5, +1.5);
+ charm->SetForceDecay(kSemiElectronic);
+
+
+ AliGenParam *beauty = new AliGenParam(10,
+ new AliGenMUONlib(),
+ AliGenMUONlib::kBeauty,
+ "central");
+ beauty->SetPtRange(0, 100);
+ beauty->SetYRange(-1.5, +1.5);
+ beauty->SetForceDecay(kSemiElectronic);
+
+ AliGenParam *beautyJ = new AliGenParam(10,
+ new AliGenMUONlib(),
+ AliGenMUONlib::kBeauty,
+ "central");
+ beautyJ->SetPtRange(0, 100);
+ beautyJ->SetYRange(-1.5, +1.5);
+ beautyJ->SetForceDecay(kBJpsiDiElectron);
+
+ gener->AddGenerator(phi,"Phi",1);
+ gener->AddGenerator(omega,"Omega",1);
+ gener->AddGenerator(jpsi,"J/psi",1);
+ gener->AddGenerator(ups,"Upsilon",1);
+ gener->AddGenerator(charm,"Charm",1);
+ gener->AddGenerator(beauty,"Beauty",1);
+ gener->AddGenerator(beautyJ,"J/Psi from Beauty",1);
+ gGener=gener;
+ }
+ break;
+ case kPyJJ:
+ {
+ comment = comment.Append(" Jet-jet at 5.5 TeV");
+ AliGenPythia *gener = new AliGenPythia(-1);
+ gener->SetEnergyCMS(5500.);
+ gener->SetProcess(kPyJets);
+ Double_t ptHardMin=10.0, ptHardMax=-1.0;
+ gener->SetPtHard(ptHardMin,ptHardMax);
+ gener->SetYHard(-0.7,0.7);
+ gener->SetJetEtaRange(-0.2,0.2);
+ gener->SetEventListRange(0,1);
+ gGener=gener;
+ }
+ break;
+ case kPyGJ:
+ {
+ comment = comment.Append(" Gamma-jet at 5.5 TeV");
+ AliGenPythia *gener = new AliGenPythia(-1);
+ gener->SetEnergyCMS(5500.);
+ gener->SetProcess(kPyDirectGamma);
+ Double_t ptHardMin=10.0, ptHardMax=-1.0;
+ gener->SetPtHard(ptHardMin,ptHardMax);
+ gener->SetYHard(-1.0,1.0);
+ gener->SetGammaEtaRange(-0.13,0.13);
+ gener->SetGammaPhiRange(210.,330.);
+ gener->SetEventListRange(0,1);
+ gGener=gener;
+ }
+ break;
+ case kMuonCocktailCent1:
+ {
+ comment = comment.Append(" Muon Cocktail Cent1");
+ AliGenMUONCocktail * gener = new AliGenMUONCocktail();
+ gener->SetPtRange(0.4,100.); // Transverse momentum range
+ gener->SetPhiRange(0.,360.); // Azimuthal angle range
+ gener->SetYRange(-4.0,-2.4);
+ gener->SetMuonPtCut(0.8);
+ gener->SetMuonThetaCut(171.,178.);
+ gener->SetMuonMultiplicity(2);
+ gener->SetImpactParameterRange(0.,5.); //Centrality class Cent1 for PDC04
+ gGener=gener;
+ }
+ break;
+ case kMuonCocktailPer1:
+ {
+ comment = comment.Append(" Muon Cocktail Per1");
+ AliGenMUONCocktail * gener = new AliGenMUONCocktail();
+ gener->SetPtRange(0.0,100.); // Transverse momentum range
+ gener->SetPhiRange(0.,360.); // Azimuthal angle range
+ gener->SetYRange(-4.0,-2.4);
+ gener->SetMuonPtCut(0.8);
+ gener->SetMuonThetaCut(171.,178.);
+ gener->SetMuonMultiplicity(2);
+ gener->SetImpactParameterRange(5.,8.6);//Centrality class Per1 for PDC04
+ gGener=gener;
+ }
+ break;
+ case kMuonCocktailPer4:
+ {
+ comment = comment.Append(" Muon Cocktail Per4");
+ AliGenMUONCocktail * gener = new AliGenMUONCocktail();
+ gener->SetPtRange(0.0,100.); // Transverse momentum range
+ gener->SetPhiRange(0.,360.); // Azimuthal angle range
+ gener->SetYRange(-4.0,-2.4);
+ gener->SetMuonPtCut(0.8);
+ gener->SetMuonThetaCut(171.,178.);
+ gener->SetMuonMultiplicity(2);
+ gener->SetImpactParameterRange(13.2,15.0);//Centrality class Per4 for PDC04
+ gGener=gener;
+ }
+ break;
+ case kMuonCocktailCent1HighPt:
+ {
+ comment = comment.Append(" Muon Cocktail HighPt Cent1");
+ AliGenMUONCocktail * gener = new AliGenMUONCocktail();
+ gener->SetPtRange(0.0,100.); // Transverse momentum range
+ gener->SetPhiRange(0.,360.); // Azimuthal angle range
+ gener->SetYRange(-4.0,-2.4);
+ gener->SetMuonPtCut(2.5);
+ gener->SetMuonThetaCut(171.,178.);
+ gener->SetMuonMultiplicity(2);
+ gener->SetImpactParameterRange(0.,5.); //Centrality class Cent1 for PDC04
+ gGener=gener;
+ }
+ break;
+ case kMuonCocktailPer1HighPt :
+ {
+ comment = comment.Append(" Muon Cocktail HighPt Per1");
+ AliGenMUONCocktail * gener = new AliGenMUONCocktail();
+ gener->SetPtRange(0.0,100.); // Transverse momentum range
+ gener->SetPhiRange(0.,360.); // Azimuthal angle range
+ gener->SetYRange(-4.0,-2.4);
+ gener->SetMuonPtCut(2.5);
+ gener->SetMuonThetaCut(171.,178.);
+ gener->SetMuonMultiplicity(2);
+ gener->SetImpactParameterRange(5.,8.6);//Centrality class Per1 for PDC04
+ gGener=gener;
+ }
+ break;
+ case kMuonCocktailPer4HighPt:
+ {
+ comment = comment.Append(" Muon Cocktail HighPt Per4");
+ AliGenMUONCocktail * gener = new AliGenMUONCocktail();
+ gener->SetPtRange(0.0,100.); // Transverse momentum range
+ gener->SetPhiRange(0.,360.); // Azimuthal angle range
+ gener->SetYRange(-4.0,-2.4);
+ gener->SetMuonPtCut(2.5);
+ gener->SetMuonThetaCut(171.,178.);
+ gener->SetMuonMultiplicity(2);
+ gener->SetImpactParameterRange(13.2,15.0);//Centrality class Per4 for PDC04
+ gGener=gener;
+ }
+ break;
+ case kMuonCocktailCent1Single:
+ {
+ comment = comment.Append(" Muon Cocktail Single Cent1");
+ AliGenMUONCocktail * gener = new AliGenMUONCocktail();
+ gener->SetPtRange(0.0,100.); // Transverse momentum range
+ gener->SetPhiRange(0.,360.); // Azimuthal angle range
+ gener->SetYRange(-4.0,-2.4);
+ gener->SetMuonPtCut(0.8);
+ gener->SetMuonThetaCut(171.,178.);
+ gener->SetMuonMultiplicity(1);
+ gener->SetImpactParameterRange(0.,5.); //Centrality class Cent1 for PDC04
+ gGener=gener;
+ }
+ break;
+ case kMuonCocktailPer1Single :
+ {
+ comment = comment.Append(" Muon Cocktail Single Per1");
+ AliGenMUONCocktail * gener = new AliGenMUONCocktail();
+ gener->SetPtRange(0.0,100.); // Transverse momentum range
+ gener->SetPhiRange(0.,360.); // Azimuthal angle range
+ gener->SetYRange(-4.0,-2.4);
+ gener->SetMuonPtCut(0.8);
+ gener->SetMuonThetaCut(171.,178.);
+ gener->SetMuonMultiplicity(1);
+ gener->SetImpactParameterRange(5.,8.6);//Centrality class Per1 for PDC04
+ gener->SetNumberOfParticipants(229.3);//Centrality class Per1 for PDC04
+ gGener=gener;
+ }
+ break;
+ case kMuonCocktailPer4Single:
+ {
+ comment = comment.Append(" Muon Cocktail Single Per4");
+ AliGenMUONCocktail * gener = new AliGenMUONCocktail();
+ gener->SetPtRange(0.0,100.); // Transverse momentum range
+ gener->SetPhiRange(0.,360.); // Azimuthal angle range
+ gener->SetYRange(-4.0,-2.4);
+ gener->SetMuonPtCut(0.8);
+ gener->SetMuonThetaCut(171.,178.);
+ gener->SetMuonMultiplicity(1);
+ gener->SetImpactParameterRange(13.2,15.0);//Centrality class Per4 for PDC04
+ gGener=gener;
+ }
+ break;
+ case kFlow_2_2000:
+ {
+ comment = comment.Append(" Flow with dN/deta = 2000, vn = 2%");
+ gGener = GeVSimStandard(2000., 2.);
+ }
+ break;
+
+ case kFlow_10_2000:
+ {
+ comment = comment.Append(" Flow with dN/deta = 2000, vn = 10%");
+ gGener = GeVSimStandard(2000., 10.);
+ }
+ break;
+
+ case kFlow_6_2000:
+ {
+ comment = comment.Append(" Flow with dN/deta = 2000, vn = 6%");
+ gGener = GeVSimStandard(2000., 6.);
+ }
+ break;
+
+ case kFlow_6_5000:
+ {
+ comment = comment.Append(" Flow with dN/deta = 5000, vn = 6%");
+ gGener = GeVSimStandard(5000., 6.);
+ }
+ break;
+ case kHIJINGplus:
+ {
+ //
+ // The cocktail
+ AliGenCocktail *gener = new AliGenCocktail();
+
+ //
+ // Charm production by Pythia
+ AliGenPythia * genpyc = new AliGenPythia(230);
+ genpyc->SetProcess(kPyCharmPbPbMNR);
+ genpyc->SetStrucFunc(kCTEQ4L);
+ genpyc->SetPtHard(2.1,-1.0);
+ genpyc->SetEnergyCMS(5500.);
+ genpyc->SetNuclei(208,208);
+ genpyc->SetYRange(-999,999);
+ genpyc->SetForceDecay(kAll);
+ genpyc->SetFeedDownHigherFamily(kFALSE);
+ genpyc->SetCountMode(AliGenPythia::kCountParents);
+ //
+ // Beauty production by Pythia
+ AliGenPythia * genpyb = new AliGenPythia(9);
+ genpyb->SetProcess(kPyBeautyPbPbMNR);
+ genpyb->SetStrucFunc(kCTEQ4L);
+ genpyb->SetPtHard(2.75,-1.0);
+ genpyb->SetEnergyCMS(5500.);
+ genpyb->SetNuclei(208,208);
+ genpyb->SetYRange(-999,999);
+ genpyb->SetForceDecay(kAll);
+ genpyb->SetFeedDownHigherFamily(kFALSE);
+ genpyb->SetCountMode(AliGenPythia::kCountParents);
+ //
+ // Hyperons
+ //
+ AliGenSTRANGElib *lib = new AliGenSTRANGElib();
+ Int_t particle;
+ // Xi
+ particle = AliGenSTRANGElib::kXiMinus;
+ AliGenParam *genXi = new AliGenParam(16,particle,lib->GetPt(particle),lib->GetY(particle),lib->GetIp(particle));
+ genXi->SetPtRange(0., 12.);
+ genXi->SetYRange(-1.1, 1.1);
+ genXi->SetForceDecay(kNoDecay);
+
+ //
+ // Omega
+ particle = AliGenSTRANGElib::kOmegaMinus;
+ AliGenParam *genOmega = new AliGenParam(10,particle,lib->GetPt(particle),lib->GetY(particle),lib->GetIp(particle));
+ genOmega->SetPtRange(0, 12.);
+ genOmega->SetYRange(-1.1, 1.1);
+ genOmega->SetForceDecay(kNoDecay);
+
+ //
+ // Central Hijing
+ AliGenHijing *genHi = HijingStandard();
+ genHi->SwitchOffHeavyQuarks(kTRUE);
+ genHi->SetImpactParameterRange(0.,5.);
+ //
+ // Add everything to the cocktail and shake ...
+ gener->AddGenerator(genHi, "Hijing cent1", 1);
+ gener->AddGenerator(genpyc, "Extra charm", 1);
+ gener->AddGenerator(genpyb, "Extra beauty", 1);
+ gener->AddGenerator(genXi, "Xi" , 1);
+ gener->AddGenerator(genOmega, "Omega", 1);
+ gGener = gener;
+ }
+ break;
+ default: break;
+ }
+
+ return gGener;
+}
+
+AliGenHijing* HijingStandard()
+{
+ AliGenHijing *gener = new AliGenHijing(-1);
+// centre of mass energy
+ gener->SetEnergyCMS(5500.);
+// reference frame
+ gener->SetReferenceFrame("CMS");
+// projectile
+ gener->SetProjectile("A", 208, 82);
+ gener->SetTarget ("A", 208, 82);
+// tell hijing to keep the full parent child chain
+ gener->KeepFullEvent();
+// enable jet quenching
+ gener->SetJetQuenching(1);
+// enable shadowing
+ gener->SetShadowing(1);
+// neutral pion and heavy particle decays switched off
+ gener->SetDecaysOff(1);
+// Don't track spectators
+ gener->SetSpectators(0);
+// kinematic selection
+ gener->SetSelectAll(0);
+ return gener;
+}
+
+AliGenGeVSim* GeVSimStandard(Float_t mult, Float_t vn)
+{
+ AliGenGeVSim* gener = new AliGenGeVSim(0);
+//
+// Mult is the number of charged particles in |eta| < 0.5
+// Vn is in (%)
+//
+// Sigma of the Gaussian dN/deta
+ Float_t sigma_eta = 2.75;
+//
+// Maximum eta
+ Float_t etamax = 7.00;
+//
+//
+// Scale from multiplicity in |eta| < 0.5 to |eta| < |etamax|
+ Float_t mm = mult * (TMath::Erf(etamax/sigma_eta/sqrt(2.)) / TMath::Erf(0.5/sigma_eta/sqrt(2.)));
+//
+// Scale from charged to total multiplicity
+//
+ mm *= 1.587;
+//
+// Vn
+ vn /= 100.;
+//
+// Define particles
+//
+//
+// 78% Pions (26% pi+, 26% pi-, 26% p0) T = 250 MeV
+ AliGeVSimParticle *pp = new AliGeVSimParticle(kPiPlus, 1, 0.26 * mm, 0.25, sigma_eta) ;
+ AliGeVSimParticle *pm = new AliGeVSimParticle(kPiMinus, 1, 0.26 * mm, 0.25, sigma_eta) ;
+ AliGeVSimParticle *p0 = new AliGeVSimParticle(kPi0, 1, 0.26 * mm, 0.25, sigma_eta) ;
+//
+// 12% Kaons (3% K0short, 3% K0long, 3% K+, 3% K-) T = 300 MeV
+ AliGeVSimParticle *ks = new AliGeVSimParticle(kK0Short, 1, 0.03 * mm, 0.30, sigma_eta) ;
+ AliGeVSimParticle *kl = new AliGeVSimParticle(kK0Long, 1, 0.03 * mm, 0.30, sigma_eta) ;
+ AliGeVSimParticle *kp = new AliGeVSimParticle(kKPlus, 1, 0.03 * mm, 0.30, sigma_eta) ;
+ AliGeVSimParticle *km = new AliGeVSimParticle(kKMinus, 1, 0.03 * mm, 0.30, sigma_eta) ;
+//
+// 10% Protons / Neutrons (5% Protons, 5% Neutrons) T = 250 MeV
+ AliGeVSimParticle *pr = new AliGeVSimParticle(kProton, 1, 0.05 * mm, 0.25, sigma_eta) ;
+ AliGeVSimParticle *ne = new AliGeVSimParticle(kNeutron, 1, 0.05 * mm, 0.25, sigma_eta) ;
+//
+// Set Elliptic Flow properties
+
+ Float_t pTsaturation = 2. ;
+
+ pp->SetEllipticParam(vn,pTsaturation,0.) ;
+ pm->SetEllipticParam(vn,pTsaturation,0.) ;
+ p0->SetEllipticParam(vn,pTsaturation,0.) ;
+ pr->SetEllipticParam(vn,pTsaturation,0.) ;
+ ne->SetEllipticParam(vn,pTsaturation,0.) ;
+ ks->SetEllipticParam(vn,pTsaturation,0.) ;
+ kl->SetEllipticParam(vn,pTsaturation,0.) ;
+ kp->SetEllipticParam(vn,pTsaturation,0.) ;
+ km->SetEllipticParam(vn,pTsaturation,0.) ;
+//
+// Set Direct Flow properties
+ pp->SetDirectedParam(vn,1.0,0.) ;
+ pm->SetDirectedParam(vn,1.0,0.) ;
+ p0->SetDirectedParam(vn,1.0,0.) ;
+ pr->SetDirectedParam(vn,1.0,0.) ;
+ ne->SetDirectedParam(vn,1.0,0.) ;
+ ks->SetDirectedParam(vn,1.0,0.) ;
+ kl->SetDirectedParam(vn,1.0,0.) ;
+ kp->SetDirectedParam(vn,1.0,0.) ;
+ km->SetDirectedParam(vn,1.0,0.) ;
+//
+// Add particles to the list
+ gener->AddParticleType(pp) ;
+ gener->AddParticleType(pm) ;
+ gener->AddParticleType(p0) ;
+ gener->AddParticleType(pr) ;
+ gener->AddParticleType(ne) ;
+ gener->AddParticleType(ks) ;
+ gener->AddParticleType(kl) ;
+ gener->AddParticleType(kp) ;
+ gener->AddParticleType(km) ;
+//
+// Random Ev.Plane ----------------------------------
+ TF1 *rpa = new TF1("gevsimPsiRndm","1", 0, 360);
+// --------------------------------------------------
+ gener->SetPtRange(0., 9.) ; // Use a resonable range! (used for bin size in numerical integration)
+ gener->SetPhiRange(0, 360);
+ //
+ // Set pseudorapidity range
+ Float_t thmin = EtaToTheta(+etamax);
+ Float_t thmax = EtaToTheta(-etamax);
+ gener->SetThetaRange(thmin,thmax);
+ return gener;
+}
+
+
+
+void ProcessEnvironmentVars()
+{
+ // Run type
+ if (gSystem->Getenv("CONFIG_RUN_TYPE")) {
+ for (Int_t iRun = 0; iRun < kRunMax; iRun++) {
+ if (strcmp(gSystem->Getenv("CONFIG_RUN_TYPE"), pprRunName[iRun])==0) {
+ srun = (PprRun_t)iRun;
+ cout<<"Run type set to "<<pprRunName[iRun]<<endl;
+ }
+ }
+ }
+
+ // Random Number seed
+ if (gSystem->Getenv("CONFIG_SEED")) {
+ sseed = atoi(gSystem->Getenv("CONFIG_SEED"));
+ }
+}
git://git.uio.no / u / mrichter / AliRoot.git / commitdiff