/*
$Log$
+ Revision 1.49 2001/05/10 12:23:49 jbarbosa
+ Repositioned the RICH modules.
+ Eliminated magic numbers.
+ Incorporated diagnostics (from macros).
+
Revision 1.48 2001/03/15 10:35:00 jbarbosa
Corrected bug in MakeBranch (was using a different version of STEER)
// --- Places the detectors defined with GSVOLU
// Place material inside RICH
gMC->Gspos("SRIC", 1, "RICH", 0.,0., 0., 0, "ONLY");
- gMC->Gspos("AIR2", 1, "RICH", 66.3 + 1.2505, 1.276 - geometry->GetGapThickness()/2 - geometry->GetQuartzThickness() - geometry->GetFreonThickness()- .4 - .6 - .05 - .376 -.5 - 3.5, 0., 0, "ONLY");
- gMC->Gspos("AIR2", 2, "RICH", -66.3 - 1.2505, 1.276 - geometry->GetGapThickness()/2 - geometry->GetQuartzThickness() - geometry->GetFreonThickness()- .4 - .6 - .05 - .376 -.5 - 3.5, 0., 0, "ONLY");
- gMC->Gspos("AIR3", 1, "RICH", 0., 1.276 - geometry->GetGapThickness()/2 - geometry->GetQuartzThickness() - geometry->GetFreonThickness()- .4 - .6 - .05 - .376 -.5 - 3.5, -68.35 - 1.25, 0, "ONLY");
- gMC->Gspos("AIR3", 2, "RICH", 0., 1.276 - geometry->GetGapThickness()/2 - geometry->GetQuartzThickness() - geometry->GetFreonThickness()- .4 - .6 - .05 - .376 -.5 - 3.5, 68.35 + 1.25, 0, "ONLY");
+ gMC->Gspos("AIR2", 1, "RICH", 66.3 + 1.2505, 1.276 - geometry->GetGapThickness()/2 - geometry->GetQuartzThickness() - geometry->GetFreonThickness()- .4 - .6 - .05 - .376 -.5 - 3.35, 0., 0, "ONLY");
+ gMC->Gspos("AIR2", 2, "RICH", -66.3 - 1.2505, 1.276 - geometry->GetGapThickness()/2 - geometry->GetQuartzThickness() - geometry->GetFreonThickness()- .4 - .6 - .05 - .376 -.5 - 3.35, 0., 0, "ONLY");
+ gMC->Gspos("AIR3", 1, "RICH", 0., 1.276 - geometry->GetGapThickness()/2 - geometry->GetQuartzThickness() - geometry->GetFreonThickness()- .4 - .6 - .05 - .376 -.5 - 3.35, -68.35 - 1.25, 0, "ONLY");
+ gMC->Gspos("AIR3", 2, "RICH", 0., 1.276 - geometry->GetGapThickness()/2 - geometry->GetQuartzThickness() - geometry->GetFreonThickness()- .4 - .6 - .05 - .376 -.5 - 3.35, 68.35 + 1.25, 0, "ONLY");
gMC->Gspos("ALUM", 1, "SRIC", 0., 1.276 - geometry->GetGapThickness()/2 - geometry->GetQuartzThickness() - geometry->GetFreonThickness()- .4 - .6 - .05 - .376 -.025, 0., 0, "ONLY");
// PCB placing
- gMC->Gspos("PCB ", 1, "SRIC ", 0., 1.276 + geometry->GetGapThickness()/2 + .5 + 1.05, csi_width/4 + .5025 + 1.2, 0, "ONLY");
- gMC->Gspos("PCB ", 2, "SRIC ", 0., 1.276 + geometry->GetGapThickness()/2 + .5 + 1.05, -csi_width/4 - .5025 - 1.2, 0, "ONLY");
+ gMC->Gspos("PCB ", 1, "SRIC ", 0., 1.276 + geometry->GetGapThickness()/2 + .5 + 1.05, csi_width/4 + .5025 + 2.5, 0, "ONLY");
+ gMC->Gspos("PCB ", 2, "SRIC ", 0., 1.276 + geometry->GetGapThickness()/2 + .5 + 1.05, -csi_width/4 - .5025 - 2.5, 0, "ONLY");