/*
$Log$
+Revision 1.8 2007/10/04 13:15:37 arcelli
+updates to comply with AliTOFGeometryV5 becoming AliTOFGeometry
+
Revision 1.7 2007/10/03 18:07:26 arcelli
right handling of l2t matrices and alignable entries in case of TOF holes (Annalisa)
ClassImp(AliTOFv6T0)
+const Float_t AliTOFv6T0::fgkModuleWallThickness = 0.33; // cm
+const Float_t AliTOFv6T0::fgkInterCentrModBorder1 = 49.5 ; // cm
+const Float_t AliTOFv6T0::fgkInterCentrModBorder2 = 57.5 ; // cm
+const Float_t AliTOFv6T0::fgkExterInterModBorder1 = 196.0 ; // cm
+const Float_t AliTOFv6T0::fgkExterInterModBorder2 = 203.5 ; // cm
+const Float_t AliTOFv6T0::fgkLengthInCeModBorder = 4.7 ; // cm
+const Float_t AliTOFv6T0::fgkLengthExInModBorder = 7.0 ; // cm
+const Float_t AliTOFv6T0::fgkModuleCoverThickness = 2.0 ; // cm
+const Float_t AliTOFv6T0::fgkFEAwidth1 = 19.0; // cm
+const Float_t AliTOFv6T0::fgkFEAwidth2 = 38.5; // cm
+const Float_t AliTOFv6T0::fgkSawThickness = 1.0; // cm
+const Float_t AliTOFv6T0::fgkCBLw = 13.5; // cm
+const Float_t AliTOFv6T0::fgkCBLh1 = 2.0; // cm
+const Float_t AliTOFv6T0::fgkCBLh2 = 12.3; // cm
+
//_____________________________________________________________________________
AliTOFv6T0::AliTOFv6T0():
fIdFTOA(-1),
const Int_t kNTof = fTOFGeometry->NSectors();
const Float_t kangle = k2PI/kNTof;
- const Float_t kInterCentrModBorder1 = 49.5;
- const Float_t kInterCentrModBorder2 = 57.5;
+ //const Float_t fgkInterCentrModBorder1 = 49.5;
+ //const Float_t fgkInterCentrModBorder2 = 57.5;
Float_t ang;
// define offset for nodes
- Float_t zOffsetB = (fTOFGeometry->ZlenA()*0.5 + (kInterCentrModBorder1+kInterCentrModBorder2)*0.5)*0.5;
+ Float_t zOffsetB = (fTOFGeometry->ZlenA()*0.5 + (fgkInterCentrModBorder1+fgkInterCentrModBorder2)*0.5)*0.5;
Float_t zOffsetA = 0.;
// Define TOF basic volume
// Definition of the Time Of Fligh Resistive Plate Chambers
//
- const Float_t kPi = TMath::Pi();
-
- const Float_t kInterCentrModBorder1 = 49.5;
- const Float_t kInterCentrModBorder2 = 57.5;
- const Float_t kExterInterModBorder1 = 196.0;
- const Float_t kExterInterModBorder2 = 203.5;
-
- const Float_t kLengthExInModBorder = 4.7;
- const Float_t kLengthInCeModBorder = 7.0;
-
// module wall thickness (cm)
- const Float_t kModuleWallThickness = 0.33;
-
- // honeycomb layer between strips and cards (cm)
- const Float_t kHoneycombLayerThickness = 2.;
+ //const Float_t fgkModuleWallThickness = 0.33;
AliDebug(1, "************************* TOF geometry **************************");
AliDebug(1,Form(" xtof %d", xtof));
AliDebug(1,Form(" ytof %d", ytof));
AliDebug(1,Form(" zlenA %d", zlenA));
AliDebug(2,Form(" zlenA*0.5 = %d", zlenA*0.5));
-
+
+ Float_t xFLT, yFLT, zFLTA;
+ xFLT = xtof - 2.*fgkModuleWallThickness;
+ yFLT = ytof*0.5 - fgkModuleWallThickness;
+ zFLTA = zlenA - 2.*fgkModuleWallThickness;
+
+ CreateModules(xtof, ytof, zlenA, xFLT, yFLT, zFLTA);
+ MakeStripsInModules(ytof, zlenA);
+
+ CreateModuleCovers(xtof, zlenA);
+
+ CreateBackZone(xtof, ytof, zlenA);
+ MakeFrontEndElectronics();
+ MakeFEACooling(xtof, ytof, zlenA);
+ MakeNinoMask(xtof, ytof, zlenA);
+ MakeSuperModuleCooling(xtof, ytof, zlenA);
+ MakeSuperModuleServices(xtof, ytof, zlenA);
+
+ MakeModulesInBTOFvolumes(ytof, zlenA);
+ MakeCoversInBTOFvolumes();
+ MakeBackInBTOFvolumes(ytof);
+
+ MakeReadoutCrates(ytof);
+
+}
+
+//_____________________________________________________________________________
+void AliTOFv6T0::CreateModules(Float_t xtof, Float_t ytof, Float_t zlenA,
+ Float_t xFLT, Float_t yFLT, Float_t zFLTA) const
+{
+ //
+ // Create supermodule volume
+ // and wall volumes to separate 5 modules
+ //
+
+ const Float_t kPi = TMath::Pi();
+
+ //const Float_t fgkInterCentrModBorder1 = 49.5;
+ //const Float_t fgkInterCentrModBorder2 = 57.5;
+ //const Float_t fgkExterInterModBorder1 = 196.0;
+ //const Float_t fgkExterInterModBorder2 = 203.5;
+
+ //const Float_t fgkLengthExInModBorder = 4.7;
+ //const Float_t fgkLengthInCeModBorder = 7.0;
+
+ // module wall thickness (cm)
+ //const Float_t fgkModuleWallThickness = 0.33;
+
// Definition of the of fibre glass modules (FTOA, FTOB and FTOC)
-
- Float_t xcoor, ycoor, zcoor;
- Float_t par[3];
- Int_t *idtmed = fIdtmed->GetArray()-499;
- Int_t idrotm[100];
+ Int_t *idtmed = fIdtmed->GetArray()-499;
+
+ Int_t idrotm[8];
+
+ Float_t par[3];
par[0] = xtof * 0.5;
par[1] = ytof * 0.25;
par[2] = zlenA * 0.5;
- gMC->Gsvolu("FTOA", "BOX ", idtmed[503], par, 3); // fibre glass
-
+ gMC->Gsvolu("FTOA", "BOX ", idtmed[503], par, 3); // Fibre glass
+
if (fTOFHoles) {
par[0] = xtof * 0.5;
par[1] = ytof * 0.25;
- par[2] = (zlenA*0.5 - kInterCentrModBorder1)*0.5;
- gMC->Gsvolu("FTOB", "BOX ", idtmed[503], par, 3); // fibre glass
- gMC->Gsvolu("FTOC", "BOX ", idtmed[503], par, 3); // fibre glass
- }
-
- // New supermodule card section description
- // 2 cm honeycomb layer between strips and cards
- par[0] = xtof*0.5 + 2.;
- par[1] = kHoneycombLayerThickness*0.5;
- par[2] = zlenA*0.5 + 2.;
- gMC->Gsvolu("FPEA", "BOX ", idtmed[506], par, 3); // Al + Cu honeycomb
- if (fTOFHoles) {
- //par[0] = xtof*0.5 + 2.;
- //par[1] = kHoneycombLayerThickness*0.5;
- par[2] = (zlenA*0.5 - kInterCentrModBorder1)*0.5 + 2.;
- gMC->Gsvolu("FPEB", "BOX ", idtmed[506], par, 3); // Al + Cu honeycomb
+ par[2] = (zlenA*0.5 - fgkInterCentrModBorder1)*0.5;
+ gMC->Gsvolu("FTOB", "BOX ", idtmed[503], par, 3); // Fibre glass
+ gMC->Gsvolu("FTOC", "BOX ", idtmed[503], par, 3); // Fibre glass
}
- // Definition of the air card containers (FAIA and FAIB)
-
- par[0] = xtof*0.5;
- par[1] = (ytof*0.5 - kHoneycombLayerThickness)*0.5;
- par[2] = zlenA*0.5;
- gMC->Gsvolu("FAIA", "BOX ", idtmed[500], par, 3); // Air
- if (fTOFHoles) gMC->Gsvolu("FAIB", "BOX ", idtmed[500], par, 3); // Air
-
- // Positioning of fibre glass modules (FTOA, FTOB and FTOC) and
- // card containers (FPEA, FAIA and FAIB)
-
- //AliMatrix(idrotm[0], 90., 0., 0., 0., 90.,-90.);
- AliMatrix(idrotm[0], 90., 0., 0., 0., 90.,270.);
- xcoor = 0.;
- for(Int_t isec=0; isec<fTOFGeometry->NSectors(); isec++){
- if(fTOFSectors[isec]==-1)continue;
- char name[16];
- sprintf(name, "BTOF%d",isec);
- if (fTOFHoles && (isec==11||isec==12)) {
- //if (fTOFHoles && (isec==16||isec==17)) { \\Old 6h convention
- //xcoor = 0.;
- ycoor = (zlenA*0.5 + kInterCentrModBorder1)*0.5;
- zcoor = -ytof * 0.25;
- gMC->Gspos("FTOB", 0, name, xcoor, ycoor, zcoor, idrotm[0], "ONLY");
- gMC->Gspos("FTOC", 0, name, xcoor,-ycoor, zcoor, idrotm[0], "ONLY");
- //xcoor = 0.;
- //ycoor = (zlenA*0.5 + kInterCentrModBorder1)*0.5;
- zcoor = kHoneycombLayerThickness*0.5;
- gMC->Gspos("FPEB", 1, name, xcoor, ycoor, zcoor, idrotm[0], "ONLY");
- gMC->Gspos("FPEB", 2, name, xcoor,-ycoor, zcoor, idrotm[0], "ONLY");
- //xcoor = 0.;
- ycoor = 0.;
- zcoor = kHoneycombLayerThickness + (ytof*0.5 - kHoneycombLayerThickness)*0.5;
- gMC->Gspos("FAIB", 0, name, xcoor, ycoor, zcoor, idrotm[0], "ONLY");
- }
- else {
- //xcoor = 0.;
- ycoor = 0.;
- zcoor = -ytof * 0.25;
- gMC->Gspos("FTOA", 0, name, xcoor, ycoor, zcoor, idrotm[0], "ONLY");
- //xcoor = 0.;
- //ycoor = 0.;
- zcoor = kHoneycombLayerThickness*0.5;
- gMC->Gspos("FPEA", 0, name, xcoor, ycoor, zcoor, idrotm[0], "ONLY");
- //xcoor = 0.;
- //ycoor = 0.;
- zcoor = kHoneycombLayerThickness + (ytof*0.5 - kHoneycombLayerThickness)*0.5;
- gMC->Gspos("FAIA", 0, name, xcoor, ycoor, zcoor, idrotm[0], "ONLY");
- }
- }
// Definition and positioning
// of the not sensitive volumes with Insensitive Freon (FLTA, FLTB and FLTC)
- Float_t xFLT, yFLT, zFLTA;
-
- xFLT = xtof - kModuleWallThickness*2.;
- yFLT = ytof*0.5 - kModuleWallThickness;
- zFLTA = zlenA - kModuleWallThickness*2.;
-
par[0] = xFLT*0.5;
par[1] = yFLT*0.5;
par[2] = zFLTA*0.5;
- gMC->Gsvolu("FLTA", "BOX ", idtmed[507], par, 3); // Freon mix
+ gMC->Gsvolu("FLTA", "BOX ", idtmed[506], par, 3); // Freon mix
+ Float_t xcoor, ycoor, zcoor;
xcoor = 0.;
- ycoor = kModuleWallThickness*0.5;
+ ycoor = fgkModuleWallThickness*0.5;
zcoor = 0.;
gMC->Gspos ("FLTA", 0, "FTOA", xcoor, ycoor, zcoor, 0, "ONLY");
if (fTOFHoles) {
- par[2] = (zlenA*0.5 - kInterCentrModBorder1 - kModuleWallThickness)*0.5;
- gMC->Gsvolu("FLTB", "BOX ", idtmed[507], par, 3); // Freon mix
- gMC->Gsvolu("FLTC", "BOX ", idtmed[507], par, 3); // Freon mix
+ par[2] = (zlenA*0.5 - 2.*fgkModuleWallThickness - fgkInterCentrModBorder1)*0.5;
+ gMC->Gsvolu("FLTB", "BOX ", idtmed[506], par, 3); // Freon mix
+ gMC->Gsvolu("FLTC", "BOX ", idtmed[506], par, 3); // Freon mix
//xcoor = 0.;
- //ycoor = kModuleWallThickness*0.5;
- //zcoor = 0.;
+ //ycoor = fgkModuleWallThickness*0.5;
+ zcoor = fgkModuleWallThickness;
gMC->Gspos ("FLTB", 0, "FTOB", xcoor, ycoor, zcoor, 0, "ONLY");
- gMC->Gspos ("FLTC", 0, "FTOC", xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos ("FLTC", 0, "FTOC", xcoor, ycoor,-zcoor, 0, "ONLY");
}
- Float_t alpha, tgal, beta, tgbe, trpa[11];
-
// Definition and positioning
// of the fibre glass walls between central and intermediate modules (FWZ1 and FWZ2)
- tgal = (yFLT - 2.*kLengthInCeModBorder)/(kInterCentrModBorder2 - kInterCentrModBorder1);
+ Float_t alpha, tgal, beta, tgbe, trpa[11];
+ tgal = (yFLT - 2.*fgkLengthInCeModBorder)/(fgkInterCentrModBorder2 - fgkInterCentrModBorder1);
alpha = TMath::ATan(tgal);
- beta = (kPi*0.5 - alpha)*0.5;
- tgbe = TMath::Tan(beta);
+ beta = (kPi*0.5 - alpha)*0.5;
+ tgbe = TMath::Tan(beta);
trpa[0] = xFLT*0.5;
trpa[1] = 0.;
trpa[2] = 0.;
- trpa[3] = kModuleWallThickness;
- trpa[4] = (kLengthInCeModBorder - kModuleWallThickness*tgbe)*0.5;
- trpa[5] = (kLengthInCeModBorder + kModuleWallThickness*tgbe)*0.5;
+ trpa[3] = 2.*fgkModuleWallThickness;
+ trpa[4] = (fgkLengthInCeModBorder - 2.*fgkModuleWallThickness*tgbe)*0.5;
+ trpa[5] = (fgkLengthInCeModBorder + 2.*fgkModuleWallThickness*tgbe)*0.5;
trpa[6] = TMath::ATan(tgbe*0.5)*kRaddeg; //TMath::ATan((trpa[5] - trpa[4])/(2.*trpa[3]))*kRaddeg;
- trpa[7] = kModuleWallThickness;
- trpa[8] = (kLengthInCeModBorder - kModuleWallThickness*tgbe)*0.5;
- trpa[9] = (kLengthInCeModBorder + kModuleWallThickness*tgbe)*0.5;
+ trpa[7] = 2.*fgkModuleWallThickness;
+ trpa[8] = (fgkLengthInCeModBorder - 2.*fgkModuleWallThickness*tgbe)*0.5;
+ trpa[9] = (fgkLengthInCeModBorder + 2.*fgkModuleWallThickness*tgbe)*0.5;
trpa[10] = TMath::ATan(tgbe*0.5)*kRaddeg; //TMath::ATan((trpa[5] - trpa[4])/(2.*trpa[3]))*kRaddeg;
- gMC->Gsvolu("FWZ1","TRAP", idtmed[503], trpa, 11); // fibre glass
+ gMC->Gsvolu("FWZ1","TRAP", idtmed[503], trpa, 11); // Fibre glass
- AliMatrix (idrotm[1],90., 90.,180.,0.,90.,180.);
- AliMatrix (idrotm[4],90., 90., 0.,0.,90., 0.);
+ AliMatrix (idrotm[0],90., 90.,180.,0.,90.,180.);
+ AliMatrix (idrotm[1],90., 90., 0.,0.,90., 0.);
- xcoor = 0.;
- ycoor = -(yFLT - kLengthInCeModBorder)*0.5;
- zcoor = kInterCentrModBorder1;
- gMC->Gspos("FWZ1", 1,"FLTA", xcoor, ycoor, zcoor,idrotm[1],"ONLY");
- gMC->Gspos("FWZ1", 2,"FLTA", xcoor, ycoor,-zcoor,idrotm[4],"ONLY");
+ //xcoor = 0.;
+ ycoor = -(yFLT - fgkLengthInCeModBorder)*0.5;
+ zcoor = fgkInterCentrModBorder1;
+ gMC->Gspos("FWZ1", 1,"FLTA", xcoor, ycoor, zcoor,idrotm[0],"ONLY");
+ gMC->Gspos("FWZ1", 2,"FLTA", xcoor, ycoor,-zcoor,idrotm[1],"ONLY");
+
+ Float_t y0B, ycoorB, zcoorB;
+
+ if (fTOFHoles) {
+ y0B = fgkLengthInCeModBorder - fgkModuleWallThickness*tgbe;
+ trpa[0] = xFLT*0.5;
+ trpa[1] = 0.;
+ trpa[2] = 0.;
+ trpa[3] = fgkModuleWallThickness;
+ trpa[4] = (y0B - fgkModuleWallThickness*tgbe)*0.5;
+ trpa[5] = (y0B + fgkModuleWallThickness*tgbe)*0.5;
+ trpa[6] = TMath::ATan(tgbe*0.5)*kRaddeg; //TMath::ATan((trpa[5] - trpa[4])/(2.*trpa[3]))*kRaddeg;
+ trpa[7] = fgkModuleWallThickness;
+ trpa[8] = (y0B - fgkModuleWallThickness*tgbe)*0.5;
+ trpa[9] = (y0B + fgkModuleWallThickness*tgbe)*0.5;
+ trpa[10] = TMath::ATan(tgbe*0.5)*kRaddeg; //TMath::ATan((trpa[5] - trpa[4])/(2.*trpa[3]))*kRaddeg;
+ //xcoor = 0.;
+ ycoorB = ycoor - fgkModuleWallThickness*0.5*tgbe;
+ zcoorB = (zlenA*0.5 - 2.*fgkModuleWallThickness - fgkInterCentrModBorder1)*0.5 - 2.*fgkModuleWallThickness;
+ gMC->Gsvolu("FWZA","TRAP", idtmed[503], trpa, 11); // Fibre glass
+ gMC->Gspos("FWZA", 1,"FLTB", xcoor, ycoorB, zcoorB,idrotm[1],"ONLY");
+ gMC->Gspos("FWZA", 2,"FLTC", xcoor, ycoorB,-zcoorB,idrotm[0],"ONLY");
+ }
AliMatrix (idrotm[2],90.,270., 0.,0.,90.,180.);
- AliMatrix (idrotm[5],90.,270.,180.,0.,90., 0.);
+ AliMatrix (idrotm[3],90.,270.,180.,0.,90., 0.);
- xcoor = 0.;
- ycoor = (yFLT - kLengthInCeModBorder)*0.5;
- zcoor = kInterCentrModBorder2;
+ //xcoor = 0.;
+ ycoor = (yFLT - fgkLengthInCeModBorder)*0.5;
+ zcoor = fgkInterCentrModBorder2;
gMC->Gspos("FWZ1", 3,"FLTA", xcoor, ycoor, zcoor,idrotm[2],"ONLY");
- gMC->Gspos("FWZ1", 4,"FLTA", xcoor, ycoor,-zcoor,idrotm[5],"ONLY");
+ gMC->Gspos("FWZ1", 4,"FLTA", xcoor, ycoor,-zcoor,idrotm[3],"ONLY");
+
+ if (fTOFHoles) {
+ y0B = fgkLengthInCeModBorder + fgkModuleWallThickness*tgbe;
+ trpa[0] = xFLT*0.5;
+ trpa[1] = 0.;
+ trpa[2] = 0.;
+ trpa[3] = fgkModuleWallThickness;
+ trpa[4] = (y0B - fgkModuleWallThickness*tgbe)*0.5;
+ trpa[5] = (y0B + fgkModuleWallThickness*tgbe)*0.5;
+ trpa[6] = TMath::ATan(tgbe*0.5)*kRaddeg; //TMath::ATan((trpa[5] - trpa[4])/(2.*trpa[3]))*kRaddeg;
+ trpa[7] = fgkModuleWallThickness;
+ trpa[8] = (y0B - fgkModuleWallThickness*tgbe)*0.5;
+ trpa[9] = (y0B + fgkModuleWallThickness*tgbe)*0.5;
+ trpa[10] = TMath::ATan(tgbe*0.5)*kRaddeg; //TMath::ATan((trpa[5] - trpa[4])/(2.*trpa[3]))*kRaddeg;
+ gMC->Gsvolu("FWZB","TRAP", idtmed[503], trpa, 11); // Fibre glass
+ //xcoor = 0.;
+ ycoorB = ycoor - fgkModuleWallThickness*0.5*tgbe;
+ zcoorB = (zlenA*0.5 - 2.*fgkModuleWallThickness - fgkInterCentrModBorder1)*0.5 -
+ (fgkInterCentrModBorder2 - fgkInterCentrModBorder1) - 2.*fgkModuleWallThickness;
+ gMC->Gspos("FWZB", 1,"FLTB", xcoor, ycoorB, zcoorB,idrotm[3],"ONLY");
+ gMC->Gspos("FWZB", 2,"FLTC", xcoor, ycoorB,-zcoorB,idrotm[2],"ONLY");
+ }
- trpa[0] = 0.5*(kInterCentrModBorder2 - kInterCentrModBorder1)/TMath::Cos(alpha);
- trpa[1] = kModuleWallThickness;
+ trpa[0] = 0.5*(fgkInterCentrModBorder2 - fgkInterCentrModBorder1)/TMath::Cos(alpha);
+ trpa[1] = 2.*fgkModuleWallThickness;
trpa[2] = xFLT*0.5;
trpa[3] = -beta*kRaddeg;
trpa[4] = 0.;
trpa[5] = 0.;
- gMC->Gsvolu("FWZ2","PARA", idtmed[503], trpa, 6); // fibre glass
+ gMC->Gsvolu("FWZ2","PARA", idtmed[503], trpa, 6); // Fibre glass
- AliMatrix (idrotm[3], alpha*kRaddeg,90.,90.+alpha*kRaddeg,90.,90.,180.);
- AliMatrix (idrotm[6],180.-alpha*kRaddeg,90.,90.-alpha*kRaddeg,90.,90., 0.);
+ AliMatrix (idrotm[4], alpha*kRaddeg,90.,90.+alpha*kRaddeg,90.,90.,180.);
+ AliMatrix (idrotm[5],180.-alpha*kRaddeg,90.,90.-alpha*kRaddeg,90.,90., 0.);
- xcoor = 0.;
+ //xcoor = 0.;
ycoor = 0.;
- zcoor = (kInterCentrModBorder2 + kInterCentrModBorder1)*0.5;
- gMC->Gspos("FWZ2", 1,"FLTA", xcoor, ycoor, zcoor,idrotm[3],"ONLY");
- gMC->Gspos("FWZ2", 2,"FLTA", xcoor, ycoor,-zcoor,idrotm[6],"ONLY");
+ zcoor = (fgkInterCentrModBorder2 + fgkInterCentrModBorder1)*0.5;
+ gMC->Gspos("FWZ2", 1,"FLTA", xcoor, ycoor, zcoor,idrotm[4],"ONLY");
+ gMC->Gspos("FWZ2", 2,"FLTA", xcoor, ycoor,-zcoor,idrotm[5],"ONLY");
+
+ if (fTOFHoles) {
+ trpa[0] = 0.5*(fgkInterCentrModBorder2 - fgkInterCentrModBorder1)/TMath::Cos(alpha);
+ trpa[1] = fgkModuleWallThickness;
+ trpa[2] = xFLT*0.5;
+ trpa[3] = -beta*kRaddeg;
+ trpa[4] = 0.;
+ trpa[5] = 0.;
+ gMC->Gsvolu("FWZC","PARA", idtmed[503], trpa, 6); // Fibre glass
+ //xcoor = 0.;
+ ycoorB = ycoor - fgkModuleWallThickness*tgbe;
+ zcoorB = (zlenA*0.5 - 2.*fgkModuleWallThickness - fgkInterCentrModBorder1)*0.5 -
+ (fgkInterCentrModBorder2 - fgkInterCentrModBorder1)*0.5 - 2.*fgkModuleWallThickness;
+ gMC->Gspos("FWZC", 1,"FLTB", xcoor, ycoorB, zcoorB, idrotm[5],"ONLY");
+ gMC->Gspos("FWZC", 2,"FLTC", xcoor, ycoorB,-zcoorB, idrotm[4],"ONLY");
+ }
+
// Definition and positioning
// of the fibre glass walls between intermediate and lateral modules (FWZ3 and FWZ4)
- tgal = (yFLT - 2.*kLengthExInModBorder)/(kExterInterModBorder2 - kExterInterModBorder1);
+ tgal = (yFLT - 2.*fgkLengthExInModBorder)/(fgkExterInterModBorder2 - fgkExterInterModBorder1);
alpha = TMath::ATan(tgal);
- beta = (kPi*0.5 - alpha)*0.5;
- tgbe = TMath::Tan(beta);
+ beta = (kPi*0.5 - alpha)*0.5;
+ tgbe = TMath::Tan(beta);
trpa[0] = xFLT*0.5;
trpa[1] = 0.;
trpa[2] = 0.;
- trpa[3] = kModuleWallThickness;
- trpa[4] = (kLengthExInModBorder - kModuleWallThickness*tgbe)*0.5;
- trpa[5] = (kLengthExInModBorder + kModuleWallThickness*tgbe)*0.5;
+ trpa[3] = 2.*fgkModuleWallThickness;
+ trpa[4] = (fgkLengthExInModBorder - 2.*fgkModuleWallThickness*tgbe)*0.5;
+ trpa[5] = (fgkLengthExInModBorder + 2.*fgkModuleWallThickness*tgbe)*0.5;
trpa[6] = TMath::ATan(tgbe*0.5)*kRaddeg; //TMath::ATan((trpa[5] - trpa[4])/(2.*trpa[3]))*kRaddeg;
- trpa[7] = kModuleWallThickness;
- trpa[8] = (kLengthExInModBorder - kModuleWallThickness*tgbe)*0.5;
- trpa[9] = (kLengthExInModBorder + kModuleWallThickness*tgbe)*0.5;
+ trpa[7] = 2.*fgkModuleWallThickness;
+ trpa[8] = (fgkLengthExInModBorder - 2.*fgkModuleWallThickness*tgbe)*0.5;
+ trpa[9] = (fgkLengthExInModBorder + 2.*fgkModuleWallThickness*tgbe)*0.5;
trpa[10] = TMath::ATan(tgbe*0.5)*kRaddeg; //TMath::ATan((trpa[5] - trpa[4])/(2.*trpa[3]))*kRaddeg;
- gMC->Gsvolu("FWZ3","TRAP", idtmed[503], trpa, 11); // fibre glass
+ gMC->Gsvolu("FWZ3","TRAP", idtmed[503], trpa, 11); // Fibre glass
- xcoor = 0.;
- ycoor = (yFLT - kLengthExInModBorder)*0.5;
- zcoor = kExterInterModBorder1;
- gMC->Gspos("FWZ3", 1,"FLTA", xcoor, ycoor, zcoor,idrotm[5],"ONLY");
+ //xcoor = 0.;
+ ycoor = (yFLT - fgkLengthExInModBorder)*0.5;
+ zcoor = fgkExterInterModBorder1;
+ gMC->Gspos("FWZ3", 1,"FLTA", xcoor, ycoor, zcoor,idrotm[3],"ONLY");
gMC->Gspos("FWZ3", 2,"FLTA", xcoor, ycoor,-zcoor,idrotm[2],"ONLY");
if (fTOFHoles) {
//xcoor = 0.;
- //ycoor = (yFLT - kLengthExInModBorder)*0.5;
- zcoor = -kExterInterModBorder1 + (zlenA*0.5 + kInterCentrModBorder1 - kModuleWallThickness)*0.5;
+ //ycoor = (yFLT - fgkLengthExInModBorder)*0.5;
+ zcoor = -fgkExterInterModBorder1 + (zlenA*0.5 + fgkInterCentrModBorder1 - 2.*fgkModuleWallThickness)*0.5;
gMC->Gspos("FWZ3", 5,"FLTB", xcoor, ycoor, zcoor,idrotm[2],"ONLY");
- gMC->Gspos("FWZ3", 6,"FLTC", xcoor, ycoor,-zcoor,idrotm[5],"ONLY");
+ gMC->Gspos("FWZ3", 6,"FLTC", xcoor, ycoor,-zcoor,idrotm[3],"ONLY");
}
//xcoor = 0.;
- ycoor = -(yFLT - kLengthExInModBorder)*0.5;
- zcoor = kExterInterModBorder2;
- gMC->Gspos("FWZ3", 3,"FLTA", xcoor, ycoor, zcoor,idrotm[4],"ONLY");
- gMC->Gspos("FWZ3", 4,"FLTA", xcoor, ycoor,-zcoor,idrotm[1],"ONLY");
+ ycoor = -(yFLT - fgkLengthExInModBorder)*0.5;
+ zcoor = fgkExterInterModBorder2;
+ gMC->Gspos("FWZ3", 3,"FLTA", xcoor, ycoor, zcoor,idrotm[1],"ONLY");
+ gMC->Gspos("FWZ3", 4,"FLTA", xcoor, ycoor,-zcoor,idrotm[0],"ONLY");
if (fTOFHoles) {
//xcoor = 0.;
- //ycoor = -(yFLT - kLengthExInModBorder)*0.5;
- zcoor = -kExterInterModBorder2 + (zlenA*0.5 + kInterCentrModBorder1 - kModuleWallThickness)*0.5;
- gMC->Gspos("FWZ3", 7,"FLTB", xcoor, ycoor, zcoor,idrotm[1],"ONLY");
- gMC->Gspos("FWZ3", 8,"FLTC", xcoor, ycoor,-zcoor,idrotm[4],"ONLY");
+ //ycoor = -(yFLT - fgkLengthExInModBorder)*0.5;
+ zcoor = -fgkExterInterModBorder2 + (zlenA*0.5 + fgkInterCentrModBorder1 - 2.*fgkModuleWallThickness)*0.5;
+ gMC->Gspos("FWZ3", 7,"FLTB", xcoor, ycoor, zcoor,idrotm[0],"ONLY");
+ gMC->Gspos("FWZ3", 8,"FLTC", xcoor, ycoor,-zcoor,idrotm[1],"ONLY");
}
- trpa[0] = 0.5*(kExterInterModBorder2 - kExterInterModBorder1)/TMath::Cos(alpha);
- trpa[1] = kModuleWallThickness;
+ trpa[0] = 0.5*(fgkExterInterModBorder2 - fgkExterInterModBorder1)/TMath::Cos(alpha);
+ trpa[1] = 2.*fgkModuleWallThickness;
trpa[2] = xFLT*0.5;
trpa[3] = -beta*kRaddeg;
trpa[4] = 0.;
trpa[5] = 0.;
- gMC->Gsvolu("FWZ4","PARA", idtmed[503], trpa, 6); // fibre glass
+ gMC->Gsvolu("FWZ4","PARA", idtmed[503], trpa, 6); // Fibre glass
- AliMatrix (idrotm[13],alpha*kRaddeg,90.,90.+alpha*kRaddeg,90.,90.,180.);
- AliMatrix (idrotm[16],180.-alpha*kRaddeg,90.,90.-alpha*kRaddeg,90.,90.,0.);
+ AliMatrix (idrotm[6],alpha*kRaddeg,90.,90.+alpha*kRaddeg,90.,90.,180.);
+ AliMatrix (idrotm[7],180.-alpha*kRaddeg,90.,90.-alpha*kRaddeg,90.,90.,0.);
//xcoor = 0.;
ycoor = 0.;
- zcoor = (kExterInterModBorder2 + kExterInterModBorder1)*0.5;
- gMC->Gspos("FWZ4", 1,"FLTA", xcoor, ycoor, zcoor,idrotm[16],"ONLY");
- gMC->Gspos("FWZ4", 2,"FLTA", xcoor, ycoor,-zcoor,idrotm[13],"ONLY");
+ zcoor = (fgkExterInterModBorder2 + fgkExterInterModBorder1)*0.5;
+ gMC->Gspos("FWZ4", 1,"FLTA", xcoor, ycoor, zcoor,idrotm[7],"ONLY");
+ gMC->Gspos("FWZ4", 2,"FLTA", xcoor, ycoor,-zcoor,idrotm[6],"ONLY");
if (fTOFHoles) {
//xcoor = 0.;
//ycoor = 0.;
- zcoor = -(kExterInterModBorder2 + kExterInterModBorder1)*0.5 +
- (zlenA*0.5 + kInterCentrModBorder1 - kModuleWallThickness)*0.5;
- gMC->Gspos("FWZ4", 3,"FLTB", xcoor, ycoor, zcoor,idrotm[13],"ONLY");
- gMC->Gspos("FWZ4", 4,"FLTC", xcoor, ycoor,-zcoor,idrotm[16],"ONLY");
+ zcoor = -(fgkExterInterModBorder2 + fgkExterInterModBorder1)*0.5 +
+ (zlenA*0.5 + fgkInterCentrModBorder1 - 2.*fgkModuleWallThickness)*0.5;
+ gMC->Gspos("FWZ4", 3,"FLTB", xcoor, ycoor, zcoor,idrotm[6],"ONLY");
+ gMC->Gspos("FWZ4", 4,"FLTC", xcoor, ycoor,-zcoor,idrotm[7],"ONLY");
}
+}
- ///////////////// Detector itself //////////////////////
-
- const Int_t knx = fTOFGeometry->NpadX(); // number of pads along x
- const Int_t knz = fTOFGeometry->NpadZ(); // number of pads along z
- const Float_t kPadX = fTOFGeometry->XPad(); // pad length along x
- const Float_t kPadZ = fTOFGeometry->ZPad(); // pad length along z
-
- // new description for strip volume -double stack strip-
- // -- all constants are expressed in cm
- // heigth of different layers
- const Float_t khhony = 1.0; // heigth of HONY Layer
- const Float_t khpcby = 0.08; // heigth of PCB Layer
- const Float_t khrgly = 0.055; // heigth of RED GLASS Layer
-
- const Float_t khfiliy = 0.125; // heigth of FISHLINE Layer
- const Float_t khglassy = 0.160*0.5; // heigth of GLASS Layer
- const Float_t khglfy = khfiliy+2.*khglassy; // heigth of GLASS+FISHLINE Layer
-
- const Float_t khcpcby = 0.16; // heigth of PCB Central Layer
- const Float_t kwhonz = 8.1; // z dimension of HONEY Layer
- const Float_t kwpcbz1 = 10.6; // z dimension of PCB Lower Layer
- const Float_t kwpcbz2 = 11.6; // z dimension of PCB Upper Layer
- const Float_t kwcpcbz = 13.; // z dimension of PCB Central Layer
- const Float_t kwrglz = 8.; // z dimension of RED GLASS Layer
- const Float_t kwglfz = 7.; // z dimension of GLASS+FISHLN Layer
- const Float_t klsensmx = knx*kPadX; // length of Sensitive Layer
- const Float_t khsensmy = 0.05; // heigth of Sensitive Layer
- const Float_t kwsensmz = knz*kPadZ; // width of Sensitive Layer
+//_____________________________________________________________________________
+void AliTOFv6T0::CreateModuleCovers(Float_t xtof, Float_t zlenA) const
+{
+ //
+ // Create covers for module:
+ // per each module zone, defined according to
+ // fgkInterCentrModBorder2, fgkExterInterModBorder1 and zlenA+2 values,
+ // there is a CORNICE of thickness 2cm in Al
+ // and the contained zones in honeycomb of Al.
+ // There is also an interface layer (1.6mm thichness)
+ // and plastic and Cu corresponding to the flat cables.
+ //
- // heigth of the FSTR Volume (the strip volume)
- const Float_t khstripy = 2.*khhony+2.*khpcby+4.*khrgly+2.*khglfy+khcpcby;
+ // module cover between strips and cards (cm)
+ //const Float_t fgkModuleCoverThickness = 2.;
- // width of the FSTR Volume (the strip volume)
- const Float_t kwstripz = kwcpcbz;
- // length of the FSTR Volume (the strip volume)
- const Float_t klstripx = fTOFGeometry->StripLength();
-
- Float_t parfp[3]={klstripx*0.5, khstripy*0.5, kwstripz*0.5};
- // Coordinates of the strip center in the strip reference frame;
- // used for positioning internal strip volumes
- Float_t posfp[3]={0.,0.,0.};
+ //const Float_t fgkInterCentrModBorder2 = 57.5;
+ //const Float_t fgkExterInterModBorder1 = 196.0;
- // FSTR volume definition-filling this volume with non sensitive Gas Mixture
- gMC->Gsvolu("FSTR","BOX",idtmed[507],parfp,3); // Freon mix
+ Int_t *idtmed = fIdtmed->GetArray()-499;
- //-- HONY Layer definition
- //parfp[0] = klstripx*0.5;
- parfp[1] = khhony*0.5;
- parfp[2] = kwhonz*0.5;
- gMC->Gsvolu("FHON","BOX",idtmed[501],parfp,3); // honeycomb (Nomex)
- // positioning 2 HONY Layers on FSTR volume
- //posfp[0] = 0.;
- posfp[1] =-khstripy*0.5+parfp[1];
- //posfp[2] = 0.;
- gMC->Gspos("FHON",1,"FSTR",0., posfp[1],0.,0,"ONLY");
- gMC->Gspos("FHON",2,"FSTR",0.,-posfp[1],0.,0,"ONLY");
-
- //-- PCB Layer definition
- //parfp[0] = klstripx*0.5;
- parfp[1] = khpcby*0.5;
- parfp[2] = kwpcbz1*0.5;
- gMC->Gsvolu("FPC1","BOX",idtmed[502],parfp,3); // G10
- //parfp[0] = klstripx*0.5;
- //parfp[1] = khpcby*0.5;
- parfp[2] = kwpcbz2*0.5;
- gMC->Gsvolu("FPC2","BOX",idtmed[502],parfp,3); // G10
- // positioning 2 PCB Layers on FSTR volume
- //posfp[0] = 0.;
- posfp[1] =-khstripy*0.5+khhony+parfp[1];
- //posfp[2] = 0.;
- gMC->Gspos("FPC1",1,"FSTR",0.,-posfp[1],0.,0,"ONLY");
- gMC->Gspos("FPC2",1,"FSTR",0., posfp[1],0.,0,"ONLY");
+ Float_t par[3];
+ par[0] = xtof*0.5 + 2.;
+ par[1] = fgkModuleCoverThickness*0.5;
+ par[2] = zlenA*0.5 + 2.;
+ gMC->Gsvolu("FPEA", "BOX ", idtmed[500], par, 3); // Air
+ if (fTOFHoles) gMC->Gsvolu("FPEB", "BOX ", idtmed[500], par, 3); // Air
+
+ const Float_t kAlCoverThickness = 1.5;
+ const Float_t kInterfaceCardThickness = 0.16;
+ const Float_t kAlSkinThickness = 0.1;
+
+ //par[0] = xtof*0.5 + 2.;
+ par[1] = kAlCoverThickness*0.5;
+ //par[2] = zlenA*0.5 + 2.;
+ gMC->Gsvolu("FALT", "BOX ", idtmed[504], par, 3); // Al
+ if (fTOFHoles) gMC->Gsvolu("FALB", "BOX ", idtmed[504], par, 3); // Al
+ Float_t xcoor, ycoor, zcoor;
+ xcoor = 0.;
+ ycoor = 0.;
+ zcoor = 0.;
+ gMC->Gspos("FALT", 0, "FPEA", xcoor, ycoor, zcoor, 0, "ONLY");
+ if (fTOFHoles) gMC->Gspos("FALB", 0, "FPEB", xcoor, ycoor, zcoor, 0, "ONLY");
- //-- central PCB layer definition
- //parfp[0] = klstripx*0.5;
- parfp[1] = khcpcby*0.5;
- parfp[2] = kwcpcbz*0.5;
- gMC->Gsvolu("FPCB","BOX",idtmed[502],parfp,3); // G10
- // positioning the central PCB layer
- gMC->Gspos("FPCB",1,"FSTR",0.,0.,0.,0,"ONLY");
+ par[0] = xtof*0.5;
+ //par[1] = kAlCoverThickness*0.5;
+ par[2] = fgkInterCentrModBorder2 - 2.;
+ gMC->Gsvolu("FPE1", "BOX ", idtmed[505], par, 3); // Al honeycomb
+ //xcoor = 0.;
+ //ycoor = 0.;
+ //zcoor = 0.;
+ gMC->Gspos("FPE1", 0, "FALT", xcoor, ycoor, zcoor, 0, "ONLY");
- // Sensitive volume
- Float_t parfs[3] = {klsensmx*0.5, khsensmy*0.5, kwsensmz*0.5};
- gMC->Gsvolu("FSEN","BOX",idtmed[508],parfs,3); // sensitive
- // dividing FSEN along z in knz=2 and along x in knx=48
- gMC->Gsdvn("FSEZ","FSEN",knz,3);
- gMC->Gsdvn("FPAD","FSEZ",knx,1);
- // positioning a Sensitive layer inside FPCB
- gMC->Gspos("FSEN",1,"FPCB",0.,0.,0.,0,"ONLY");
+ if (fTOFHoles) {
+ //par[0] = xtof*0.5;
+ par[1] = kAlCoverThickness*0.5 - kAlSkinThickness;
+ //par[2] = fgkInterCentrModBorder2 - 2.;
+ gMC->Gsvolu("FPE4", "BOX ", idtmed[515], par, 3); // Al honeycomb for holes
+ //xcoor = 0.;
+ //ycoor = 0.;
+ //zcoor = 0.;
+ gMC->Gspos("FPE4", 0, "FALB", xcoor, ycoor, zcoor, 0, "ONLY");
+ }
- //-- RED GLASS Layer definition
- //parfp[0] = klstripx*0.5;
- parfp[1] = khrgly*0.5;
- parfp[2] = kwrglz*0.5;
- gMC->Gsvolu("FRGL","BOX",idtmed[509],parfp,3); // glass
- // positioning 4 RED GLASS Layers on FSTR volume
- //posfp[0] = 0.;
- posfp[1] = -khstripy*0.5+khhony+khpcby+parfp[1];
- //posfp[2] = 0.;
- gMC->Gspos("FRGL",1,"FSTR",0., posfp[1],0.,0,"ONLY");
- gMC->Gspos("FRGL",4,"FSTR",0.,-posfp[1],0.,0,"ONLY");
- //posfp[0] = 0.;
- posfp[1] = (khcpcby+khrgly)*0.5;
- //posfp[2] = 0.;
- gMC->Gspos("FRGL",2,"FSTR",0.,-posfp[1],0.,0,"ONLY");
- gMC->Gspos("FRGL",3,"FSTR",0., posfp[1],0.,0,"ONLY");
+ //par[0] = xtof*0.5;
+ //par[1] = kAlCoverThickness*0.5;
+ par[2] = (fgkExterInterModBorder1 - fgkInterCentrModBorder2)*0.5 - 2.;
+ gMC->Gsvolu("FPE2", "BOX ", idtmed[505], par, 3); // Al honeycomb
+ //xcoor = 0.;
+ //ycoor = 0.;
+ zcoor = (fgkExterInterModBorder1 + fgkInterCentrModBorder2)*0.5;
+ gMC->Gspos("FPE2", 1, "FALT", xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FPE2", 2, "FALT", xcoor, ycoor,-zcoor, 0, "ONLY");
- //-- GLASS+FISHLINE Layer definition
- //parfp[0] = klstripx*0.5;
- parfp[1] = khglfy*0.5;
- parfp[2] = kwglfz*0.5;
- gMC->Gsvolu("FGLF","BOX",idtmed[504],parfp,3);
+ if (fTOFHoles) {
+ //xcoor = 0.;
+ //ycoor = 0.;
+ //zcoor = (fgkExterInterModBorder1 + fgkInterCentrModBorder2)*0.5;
+ gMC->Gspos("FPE2", 1, "FALB", xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FPE2", 2, "FALB", xcoor, ycoor,-zcoor, 0, "ONLY");
+ }
- // positioning 2 GLASS+FISHLINE Layers on FSTR volume
- //posfp[0] = 0.;
- posfp[1] = (khcpcby + khglfy)*0.5 + khrgly;
- //posfp[2] = 0.;
- gMC->Gspos("FGLF",1,"FSTR",0.,-posfp[1],0.,0,"ONLY");
- gMC->Gspos("FGLF",2,"FSTR",0., posfp[1],0.,0,"ONLY");
+ //par[0] = xtof*0.5;
+ //par[1] = kAlCoverThickness*0.5;
+ par[2] = (zlenA*0.5 + 2. - fgkExterInterModBorder1)*0.5 - 2.;
+ gMC->Gsvolu("FPE3", "BOX ", idtmed[505], par, 3); // Al honeycomb
+ //xcoor = 0.;
+ //ycoor = 0.;
+ zcoor = (zlenA*0.5 + 2. + fgkExterInterModBorder1)*0.5;
+ gMC->Gspos("FPE3", 1, "FALT", xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FPE3", 2, "FALT", xcoor, ycoor,-zcoor, 0, "ONLY");
- // Positioning the Strips (FSTR volumes) in the FLT volumes
- Int_t maxStripNumbers [5] ={fTOFGeometry->NStripC(),
- fTOFGeometry->NStripB(),
- fTOFGeometry->NStripA(),
- fTOFGeometry->NStripB(),
- fTOFGeometry->NStripC()};
+ if (fTOFHoles) {
+ //xcoor = 0.;
+ //ycoor = 0.;
+ zcoor = (zlenA*0.5 + 2. + fgkExterInterModBorder1)*0.5;
+ gMC->Gspos("FPE3", 1, "FALB", xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FPE3", 2, "FALB", xcoor, ycoor,-zcoor, 0, "ONLY");
+ }
- Int_t totalStrip = 0;
- Float_t xpos, zpos, ypos, ang;
- for(Int_t iplate = 0; iplate < fTOFGeometry->NPlates(); iplate++){
- if (iplate>0) totalStrip += maxStripNumbers[iplate-1];
- for(Int_t istrip = 0; istrip < maxStripNumbers[iplate]; istrip++){
+ // volumes for Interface cards
+ par[0] = xtof*0.5;
+ par[1] = kInterfaceCardThickness*0.5;
+ par[2] = fgkInterCentrModBorder2 - 2.;
+ gMC->Gsvolu("FIF1", "BOX ", idtmed[502], par, 3); // G10
+ //xcoor = 0.;
+ ycoor = kAlCoverThickness*0.5 + kInterfaceCardThickness*0.5;
+ zcoor = 0.;
+ gMC->Gspos("FIF1", 0, "FPEA", xcoor, ycoor, zcoor, 0, "ONLY");
- ang = fTOFGeometry->GetAngles(iplate,istrip);
- AliDebug(1, Form(" iplate = %1i, istrip = %2i ---> ang = %f", iplate, istrip, ang));
-
- if (ang>0.) AliMatrix (idrotm[istrip+totalStrip+1],90.,0.,90.+ang,90., ang, 90.);
- else if (ang==0.) AliMatrix (idrotm[istrip+totalStrip+1],90.,0.,90.,90., 0., 0.);
- else if (ang<0.) AliMatrix (idrotm[istrip+totalStrip+1],90.,0.,90.+ang,90.,-ang,270.);
+ //par[0] = xtof*0.5;
+ //par[1] = kInterfaceCardThickness*0.5;
+ par[2] = (fgkExterInterModBorder1 - fgkInterCentrModBorder2)*0.5 - 2.;
+ gMC->Gsvolu("FIF2", "BOX ", idtmed[502], par, 3); // G10
+ //xcoor = 0.;
+ //ycoor = kAlCoverThickness*0.5 + kInterfaceCardThickness*0.5;
+ zcoor = (fgkExterInterModBorder1 + fgkInterCentrModBorder2)*0.5;
+ gMC->Gspos("FIF2", 1, "FPEA", xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FIF2", 2, "FPEA", xcoor, ycoor,-zcoor, 0, "ONLY");
+ if (fTOFHoles) {
+ gMC->Gspos("FIF2", 1, "FPEB", xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FIF2", 2, "FPEB", xcoor, ycoor,-zcoor, 0, "ONLY");
+ }
- xpos = 0.;
- zpos = fTOFGeometry->GetDistances(iplate,istrip);
- ypos = fTOFGeometry->GetHeights(iplate,istrip) + yFLT*0.5;
+ //par[0] = xtof*0.5;
+ //par[1] = kInterfaceCardThickness*0.5;
+ par[2] = (zlenA*0.5 + 2. - fgkExterInterModBorder1)*0.5 - 2.;
+ gMC->Gsvolu("FIF3", "BOX ", idtmed[502], par, 3); // G10
+ //xcoor = 0.;
+ //ycoor = kAlCoverThickness*0.5 + kInterfaceCardThickness*0.5;
+ zcoor = (zlenA*0.5 + 2. + fgkExterInterModBorder1)*0.5;
+ gMC->Gspos("FIF3", 1, "FPEA", xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FIF3", 2, "FPEA", xcoor, ycoor,-zcoor, 0, "ONLY");
+ if (fTOFHoles) {
+ gMC->Gspos("FIF3", 1, "FPEB", xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FIF3", 2, "FPEB", xcoor, ycoor,-zcoor, 0, "ONLY");
+ }
- gMC->Gspos("FSTR",istrip+totalStrip+1,"FLTA", xpos, ypos,-zpos,idrotm[istrip+totalStrip+1], "ONLY");
+ // volumes for flat cables
+ // plastic
+ const Float_t kPlasticFlatCableThickness = 0.24;
+ par[0] = xtof*0.5;
+ par[1] = kPlasticFlatCableThickness*0.5;
+ par[2] = fgkInterCentrModBorder2 - 2.;
+ gMC->Gsvolu("FFC1", "BOX ", idtmed[513], par, 3); // Plastic (CH2)
+ //xcoor = 0.;
+ ycoor = -kAlCoverThickness*0.5 - kPlasticFlatCableThickness*0.5;
+ zcoor = 0.;
+ gMC->Gspos("FFC1", 0, "FPEA", xcoor, ycoor, zcoor, 0, "ONLY");
- if (fTOFHoles) {
- if (istrip+totalStrip+1>53)
- gMC->Gspos("FSTR",istrip+totalStrip+1,"FLTC", xpos, ypos,-zpos-(zlenA*0.5 + kInterCentrModBorder1 - kModuleWallThickness)*0.5,idrotm[istrip+totalStrip+1],"ONLY");
- if (istrip+totalStrip+1<39)
- gMC->Gspos("FSTR",istrip+totalStrip+1,"FLTB", xpos, ypos,-zpos+(zlenA*0.5 + kInterCentrModBorder1 - kModuleWallThickness)*0.5,idrotm[istrip+totalStrip+1],"ONLY");
- }
- }
+ //par[0] = xtof*0.5;
+ //par[1] = kPlasticFlatCableThickness*0.5;
+ par[2] = (fgkExterInterModBorder1 - fgkInterCentrModBorder2)*0.5 - 2.;
+ gMC->Gsvolu("FFC2", "BOX ", idtmed[513], par, 3); // Plastic (CH2)
+ //xcoor = 0.;
+ //ycoor = -kAlCoverThickness*0.5 - kPlasticFlatCableThickness*0.5;
+ zcoor = (fgkExterInterModBorder1 + fgkInterCentrModBorder2)*0.5;
+ gMC->Gspos("FFC2", 1, "FPEA", xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FFC2", 2, "FPEA", xcoor, ycoor,-zcoor, 0, "ONLY");
+ if (fTOFHoles) {
+ gMC->Gspos("FFC2", 1, "FPEB", xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FFC2", 2, "FPEB", xcoor, ycoor,-zcoor, 0, "ONLY");
}
- // Definition of the cards, cooling tubes and layer for thermal dispersion
- // (3 volumes)
+ //par[0] = xtof*0.5;
+ //par[1] = kPlasticFlatCableThickness*0.5;
+ par[2] = (zlenA*0.5 + 2. - fgkExterInterModBorder1)*0.5 - 2.;
+ gMC->Gsvolu("FFC3", "BOX ", idtmed[513], par, 3); // Plastic (CH2)
+ //xcoor = 0.;
+ //ycoor = -kAlCoverThickness*0.5 - kPlasticFlatCableThickness*0.5;
+ zcoor = (zlenA*0.5 + 2. + fgkExterInterModBorder1)*0.5;
+ gMC->Gspos("FFC3", 1, "FPEA", xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FFC3", 2, "FPEA", xcoor, ycoor,-zcoor, 0, "ONLY");
+ if (fTOFHoles) {
+ gMC->Gspos("FFC3", 1, "FPEB", xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FFC3", 2, "FPEB", xcoor, ycoor,-zcoor, 0, "ONLY");
+ }
- // card volume definition
- //Float_t carpar[3] = {9.5, 5.75, 0.5};
- Float_t carpar[3] = {9.5, 5.6, 0.55};
- //gMC->Gsvolu("FCA1", "BOX ", idtmed[514], carpar, 3); // PCB+Alu small Card
- gMC->Gsvolu("FCA1", "BOX ", idtmed[500], carpar, 3); // air
- carpar[0] = 19.25;
- //carpar[1] = 5.6;//5.75;
- //carpar[2] = 0.55;//0.5;
- //gMC->Gsvolu("FCA2", "BOX ", idtmed[514], carpar, 3); // PCB+Alu long Card
- gMC->Gsvolu("FCA2", "BOX ", idtmed[500], carpar, 3); // air
+ // Cu
+ const Float_t kCopperFlatCableThickness = 0.01;
+ par[0] = xtof*0.5;
+ par[1] = kCopperFlatCableThickness*0.5;
+ par[2] = fgkInterCentrModBorder2 - 2.;
+ gMC->Gsvolu("FCC1", "BOX ", idtmed[512], par, 3); // Cu
+ //xcoor = 0.;
+ ycoor = -kAlCoverThickness*0.5 - kPlasticFlatCableThickness - kCopperFlatCableThickness*0.5;
+ zcoor = 0.;
+ gMC->Gspos("FCC1", 0, "FPEA", xcoor, ycoor, zcoor, 0, "ONLY");
+ //par[0] = xtof*0.5;
+ //par[1] = kCopperFlatCableThickness*0.5;
+ par[2] = (fgkExterInterModBorder1 - fgkInterCentrModBorder2)*0.5 - 2.;
+ gMC->Gsvolu("FCC2", "BOX ", idtmed[512], par, 3); // Cu
+ //xcoor = 0.;
+ //ycoor = -kAlCoverThickness*0.5 - kPlasticFlatCableThickness - kCopperFlatCableThickness*0.5;
+ zcoor = (fgkExterInterModBorder1 + fgkInterCentrModBorder2)*0.5;
+ gMC->Gspos("FCC2", 1, "FPEA", xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FCC2", 2, "FPEA", xcoor, ycoor,-zcoor, 0, "ONLY");
+ if (fTOFHoles) {
+ gMC->Gspos("FCC2", 1, "FPEB", xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FCC2", 2, "FPEB", xcoor, ycoor,-zcoor, 0, "ONLY");
+ }
- Float_t feaParam1[3] = {9.5, 5.6, 0.1};
- gMC->Gsvolu("FFEA", "BOX ", idtmed[502], feaParam1, 3); // G10
+ //par[0] = xtof*0.5;
+ //par[1] = kCopperFlatCableThickness*0.5;
+ par[2] = (zlenA*0.5 + 2. - fgkExterInterModBorder1)*0.5 - 2.;
+ gMC->Gsvolu("FCC3", "BOX ", idtmed[512], par, 3); // Cu
+ //xcoor = 0.;
+ //ycoor = -kAlCoverThickness*0.5 - kPlasticFlatCableThickness - kCopperFlatCableThickness*0.5;
+ zcoor = (zlenA*0.5 + 2. + fgkExterInterModBorder1)*0.5;
+ gMC->Gspos("FCC3", 1, "FPEA", xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FCC3", 2, "FPEA", xcoor, ycoor,-zcoor, 0, "ONLY");
+ if (fTOFHoles) {
+ gMC->Gspos("FCC3", 1, "FPEB", xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FCC3", 2, "FPEB", xcoor, ycoor,-zcoor, 0, "ONLY");
+ }
- Float_t al1[3] = {9.5, 0.5, 0.25};
- gMC->Gsvolu("FAL1", "BOX ", idtmed[505], al1, 3); // Aluminium
- Float_t al2[3] = {7.2, 0.8, 0.25};
- gMC->Gsvolu("FAL2", "BOX ", idtmed[505], al2, 3); // Aluminium
- Float_t al3[3] = {3.35, 3.7, 0.1};
- gMC->Gsvolu("FAL3", "BOX ", idtmed[505], al3, 3); // Aluminium
+}
- gMC->Gspos("FFEA", 1, "FCA1", 0., 0., -carpar[2]+feaParam1[2], 0, "ONLY");
+//_____________________________________________________________________________
+void AliTOFv6T0::MakeModulesInBTOFvolumes(Float_t ytof, Float_t zlenA) const
+{
+ //
+ // Fill BTOF_%i (for i=0,...17) volumes
+ // with volumes FTOA (MRPC strip container),
+ // In case of TOF holes, two sectors (i.e. 11th and 12th)
+ // are filled with volumes: FTOB and FTOC (MRPC containers),
+ //
+
+ //const Float_t fgkInterCentrModBorder1 = 49.5;
+
+ Int_t idrotm[1];
+
+ //AliMatrix(idrotm[0], 90., 0., 0., 0., 90.,-90.);
+ AliMatrix(idrotm[0], 90., 0., 0., 0., 90.,270.);
+
+ Float_t xcoor, ycoor, zcoor;
+ xcoor = 0.;
+
+ // Positioning of fibre glass modules (FTOA, FTOB and FTOC)
+
+ for(Int_t isec=0; isec<fTOFGeometry->NSectors(); isec++){
+ if(fTOFSectors[isec]==-1)continue;
+ char name[16];
+ sprintf(name, "BTOF%d",isec);
+ if (fTOFHoles && (isec==11||isec==12)) {
+ //if (fTOFHoles && (isec==16||isec==17)) { \\Old 6h convention
+ //xcoor = 0.;
+ ycoor = (zlenA*0.5 + fgkInterCentrModBorder1)*0.5;
+ zcoor = -ytof * 0.25;
+ gMC->Gspos("FTOB", 0, name, xcoor, ycoor, zcoor, idrotm[0], "ONLY");
+ gMC->Gspos("FTOC", 0, name, xcoor,-ycoor, zcoor, idrotm[0], "ONLY");
+ }
+ else {
+ //xcoor = 0.;
+ ycoor = 0.;
+ zcoor = -ytof * 0.25;
+ gMC->Gspos("FTOA", 0, name, xcoor, ycoor, zcoor, idrotm[0], "ONLY");
+ }
+ }
+
+}
+
+//_____________________________________________________________________________
+void AliTOFv6T0::MakeCoversInBTOFvolumes() const
+{
+ //
+ // Fill BTOF_%i (for i=0,...17) volumes
+ // with volumes FPEA (to separate strips from FEA cards)
+ // In case of TOF holes, two sectors (i.e. 11th and 12th)
+ // are filled with FPEB volumes
+ // (to separate MRPC strips from FEA cards)
+ //
+
+ // module cover between strips and cards (cm)
+ //const Float_t fgkModuleCoverThickness = 2.;
+
+ Int_t idrotm[1];
+
+ //AliMatrix(idrotm[0], 90., 0., 0., 0., 90.,-90.);
+ AliMatrix(idrotm[0], 90., 0., 0., 0., 90.,270.);
+
+ Float_t xcoor, ycoor, zcoor;
+ xcoor = 0.;
+ ycoor = 0.;
+ zcoor = fgkModuleCoverThickness*0.5;
+
+ char name[16];
+
+ // Positioning of module covers (FPEA, FPEB)
+
+ for(Int_t isec=0; isec<fTOFGeometry->NSectors(); isec++) {
+ if(fTOFSectors[isec]==-1)continue;
+ sprintf(name, "BTOF%d",isec);
+ //if (fTOFHoles && (isec==16||isec==17)) \\Old 6h convention
+ if (fTOFHoles && (isec==11||isec==12))
+ gMC->Gspos("FPEB", 0, name, xcoor, ycoor, zcoor, idrotm[0], "ONLY");
+ else
+ gMC->Gspos("FPEA", 0, name, xcoor, ycoor, zcoor, idrotm[0], "ONLY");
+ }
+
+}
+
+//_____________________________________________________________________________
+void AliTOFv6T0::MakeBackInBTOFvolumes(Float_t ytof) const
+{
+ //
+ // Fill BTOF_%i (for i=0,...17) volumes
+ // with volumes FAIA (FEA cards and services container)
+ // In case of TOF holes, two sectors (i.e. 11th and 12th)
+ // are filled with volumes FAIB (FEA cards and services container).
+ //
+
+ // module cover between strips and cards (cm)
+ //const Float_t fgkModuleCoverThickness = 2.;
+
+ Int_t idrotm[1];
+
+ //AliMatrix(idrotm[0], 90., 0., 0., 0., 90.,-90.);
+ AliMatrix(idrotm[0], 90., 0., 0., 0., 90.,270.);
+
+ Float_t xcoor, ycoor, zcoor;
+ xcoor = 0.;
+ ycoor = 0.;
+ zcoor = fgkModuleCoverThickness + (ytof*0.5 - fgkModuleCoverThickness)*0.5;
+
+ char name[16];
+
+ // Positioning of FEA cards and services containers (FAIA and FAIB)
+
+ for(Int_t isec=0; isec<fTOFGeometry->NSectors(); isec++) {
+ if(fTOFSectors[isec]==-1)continue;
+ sprintf(name, "BTOF%d",isec);
+ //if (fTOFHoles && (isec==16||isec==17)) \\Old 6h convention
+ if (fTOFHoles && (isec==11||isec==12))
+ gMC->Gspos("FAIB", 0, name, xcoor, ycoor, zcoor, idrotm[0], "ONLY");
+ else
+ gMC->Gspos("FAIA", 0, name, xcoor, ycoor, zcoor, idrotm[0], "ONLY");
+ }
+
+}
+
+//_____________________________________________________________________________
+void AliTOFv6T0::MakeStripsInModules(Float_t ytof, Float_t zlenA) const
+{
+ //
+ // Define MRPC strip volume, called FSTR
+ // Insert FSTR volume in FLTA/B/C volumes
+ //
+
+ // module wall thickness (cm)
+ //const Float_t fgkModuleWallThickness = 0.33;
+
+ //const Float_t fgkInterCentrModBorder1 = 49.5;
+
+ Float_t yFLT = ytof*0.5 - fgkModuleWallThickness;
+
+ Int_t *idtmed = fIdtmed->GetArray()-499;
+
+ ///////////////// Detector itself //////////////////////
+
+ const Int_t knx = fTOFGeometry->NpadX(); // number of pads along x
+ const Int_t knz = fTOFGeometry->NpadZ(); // number of pads along z
+ const Float_t kPadX = fTOFGeometry->XPad(); // pad length along x
+ const Float_t kPadZ = fTOFGeometry->ZPad(); // pad length along z
+
+ // new description for strip volume -double stack strip-
+ // -- all constants are expressed in cm
+ // height of different layers
+ const Float_t khhony = 1.0; // height of HONY Layer
+ const Float_t khpcby = 0.08; // height of PCB Layer
+ const Float_t khrgly = 0.055; // height of RED GLASS Layer
+
+ const Float_t khfiliy = 0.125; // height of FISHLINE Layer
+ const Float_t khglassy = 0.160*0.5; // semi-height of GLASS Layer
+ const Float_t khglfy = khfiliy+2.*khglassy; // height of GLASS Layer
+
+ const Float_t khcpcby = 0.16; // height of PCB Central Layer
+ const Float_t kwhonz = 8.1; // z dimension of HONEY Layer
+ const Float_t kwpcbz1 = 10.64; // z dimension of PCB Lower Layer
+ const Float_t kwpcbz2 = 11.6; // z dimension of PCB Upper Layer
+ const Float_t kwcpcbz = 12.4; // z dimension of PCB Central Layer
+
+ const Float_t kwrglz = 8.; // z dimension of RED GLASS Layer
+ const Float_t kwglfz = 7.; // z dimension of GLASS Layer
+ const Float_t klsensmx = knx*kPadX; // length of Sensitive Layer
+ const Float_t khsensmy = 0.0105; // height of Sensitive Layer
+ const Float_t kwsensmz = knz*kPadZ; // width of Sensitive Layer
+
+ // height of the FSTR Volume (the strip volume)
+ const Float_t khstripy = 2.*khhony+2.*khpcby+4.*khrgly+2.*khglfy+khcpcby;
+
+ // width of the FSTR Volume (the strip volume)
+ const Float_t kwstripz = kwcpcbz;
+ // length of the FSTR Volume (the strip volume)
+ const Float_t klstripx = fTOFGeometry->StripLength();
+
+
+ // FSTR volume definition-filling this volume with non sensitive Gas Mixture
+ Float_t parfp[3]={klstripx*0.5, khstripy*0.5, kwstripz*0.5};
+ gMC->Gsvolu("FSTR","BOX",idtmed[506],parfp,3); // Freon mix
+
+ Float_t posfp[3]={0.,0.,0.};
+
+ // NOMEX (HONEYCOMB) Layer definition
+ //parfp[0] = klstripx*0.5;
+ parfp[1] = khhony*0.5;
+ parfp[2] = kwhonz*0.5;
+ gMC->Gsvolu("FHON","BOX",idtmed[501],parfp,3); // Nomex (Honeycomb)
+ // positioning 2 NOMEX Layers on FSTR volume
+ //posfp[0] = 0.;
+ posfp[1] =-khstripy*0.5 + parfp[1];
+ //posfp[2] = 0.;
+ gMC->Gspos("FHON",1,"FSTR",0., posfp[1],0.,0,"ONLY");
+ gMC->Gspos("FHON",2,"FSTR",0.,-posfp[1],0.,0,"ONLY");
+
+ // Lower PCB Layer definition
+ //parfp[0] = klstripx*0.5;
+ parfp[1] = khpcby*0.5;
+ parfp[2] = kwpcbz1*0.5;
+ gMC->Gsvolu("FPC1","BOX",idtmed[502],parfp,3); // G10
+
+ // Upper PCB Layer definition
+ //parfp[0] = klstripx*0.5;
+ //parfp[1] = khpcby*0.5;
+ parfp[2] = kwpcbz2*0.5;
+ gMC->Gsvolu("FPC2","BOX",idtmed[502],parfp,3); // G10
+
+ // positioning 2 external PCB Layers in FSTR volume
+ //posfp[0] = 0.;
+ posfp[1] =-khstripy*0.5+khhony+parfp[1];
+ //posfp[2] = 0.;
+ gMC->Gspos("FPC1",1,"FSTR",0.,-posfp[1],0.,0,"ONLY");
+ gMC->Gspos("FPC2",1,"FSTR",0., posfp[1],0.,0,"ONLY");
+
+ // Central PCB layer definition
+ //parfp[0] = klstripx*0.5;
+ parfp[1] = khcpcby*0.5;
+ parfp[2] = kwcpcbz*0.5;
+ gMC->Gsvolu("FPCB","BOX",idtmed[502],parfp,3); // G10
+ // positioning the central PCB layer
+ gMC->Gspos("FPCB",1,"FSTR",0.,0.,0.,0,"ONLY");
+
+ // Sensitive volume definition
+ Float_t parfs[3] = {klsensmx*0.5, khsensmy*0.5, kwsensmz*0.5};
+ gMC->Gsvolu("FSEN","BOX",idtmed[507],parfs,3); // Cu sensitive
+ // dividing FSEN along z in knz=2 and along x in knx=48
+ gMC->Gsdvn("FSEZ","FSEN",knz,3);
+ gMC->Gsdvn("FPAD","FSEZ",knx,1);
+ // positioning sensitive layer inside FPCB
+ gMC->Gspos("FSEN",1,"FPCB",0.,0.,0.,0,"ONLY");
+
+ // RED GLASS Layer definition
+ //parfp[0] = klstripx*0.5;
+ parfp[1] = khrgly*0.5;
+ parfp[2] = kwrglz*0.5;
+ gMC->Gsvolu("FRGL","BOX",idtmed[508],parfp,3); // red glass
+ // positioning 4 RED GLASS Layers in FSTR volume
+ //posfp[0] = 0.;
+ posfp[1] = -khstripy*0.5+khhony+khpcby+parfp[1];
+ //posfp[2] = 0.;
+ gMC->Gspos("FRGL",1,"FSTR",0., posfp[1],0.,0,"ONLY");
+ gMC->Gspos("FRGL",4,"FSTR",0.,-posfp[1],0.,0,"ONLY");
+ //posfp[0] = 0.;
+ posfp[1] = (khcpcby+khrgly)*0.5;
+ //posfp[2] = 0.;
+ gMC->Gspos("FRGL",2,"FSTR",0.,-posfp[1],0.,0,"ONLY");
+ gMC->Gspos("FRGL",3,"FSTR",0., posfp[1],0.,0,"ONLY");
+
+ // GLASS Layer definition
+ //parfp[0] = klstripx*0.5;
+ parfp[1] = khglassy;
+ parfp[2] = kwglfz*0.5;
+ gMC->Gsvolu("FGLF","BOX",idtmed[508],parfp,3); // glass
+ // positioning 2 GLASS Layers in FSTR volume
+ //posfp[0] = 0.;
+ posfp[1] = (khcpcby + khglfy)*0.5 + khrgly;
+ //posfp[2] = 0.;
+ gMC->Gspos("FGLF",1,"FSTR",0.,-posfp[1],0.,0,"ONLY");
+ gMC->Gspos("FGLF",2,"FSTR",0., posfp[1],0.,0,"ONLY");
+
+ // Positioning the Strips (FSTR volumes) in the FLT volumes
+ Int_t maxStripNumbers [5] ={fTOFGeometry->NStripC(),
+ fTOFGeometry->NStripB(),
+ fTOFGeometry->NStripA(),
+ fTOFGeometry->NStripB(),
+ fTOFGeometry->NStripC()};
+
+ Int_t idrotm[91];
+
+ Int_t totalStrip = 0;
+ Float_t xpos, zpos, ypos, ang;
+ for(Int_t iplate = 0; iplate < fTOFGeometry->NPlates(); iplate++){
+ if (iplate>0) totalStrip += maxStripNumbers[iplate-1];
+ for(Int_t istrip = 0; istrip < maxStripNumbers[iplate]; istrip++){
+
+ ang = fTOFGeometry->GetAngles(iplate,istrip);
+ AliDebug(1, Form(" iplate = %1i, istrip = %2i ---> ang = %f", iplate, istrip, ang));
+
+ if (ang>0.) AliMatrix (idrotm[istrip+totalStrip],90.,0.,90.+ang,90., ang, 90.);
+ else if (ang==0.) AliMatrix (idrotm[istrip+totalStrip],90.,0.,90.,90., 0., 0.);
+ else if (ang<0.) AliMatrix (idrotm[istrip+totalStrip],90.,0.,90.+ang,90.,-ang,270.);
+
+ xpos = 0.;
+ ypos = fTOFGeometry->GetHeights(iplate,istrip) + yFLT*0.5;
+ zpos = fTOFGeometry->GetDistances(iplate,istrip);
+ gMC->Gspos("FSTR",istrip+totalStrip+1,"FLTA", xpos, ypos,-zpos,idrotm[istrip+totalStrip], "ONLY");
+
+ if (fTOFHoles) {
+ if (istrip+totalStrip+1>53)
+ gMC->Gspos("FSTR",istrip+totalStrip+1,"FLTC", xpos, ypos,-zpos-(zlenA*0.5 - 2.*fgkModuleWallThickness + fgkInterCentrModBorder1)*0.5,idrotm[istrip+totalStrip],"ONLY");
+ if (istrip+totalStrip+1<39)
+ gMC->Gspos("FSTR",istrip+totalStrip+1,"FLTB", xpos, ypos,-zpos+(zlenA*0.5 - 2.*fgkModuleWallThickness + fgkInterCentrModBorder1)*0.5,idrotm[istrip+totalStrip],"ONLY");
+ }
+ }
+ }
+
+}
+
+//_____________________________________________________________________________
+void AliTOFv6T0::CreateBackZone(Float_t xtof, Float_t ytof, Float_t zlenA) const
+{
+ //
+ // Define:
+ // - containers for FEA cards, cooling system
+ // signal cables and supermodule support structure
+ // (volumes called FAIA/B),
+ // - containers for FEA cards and some cooling
+ // elements for a FEA (volumes called FCA1/2).
+ //
+
+ // module cover between strips and cards (cm)
+ //const Float_t fgkModuleCoverThickness = 2.;
+
+ //const Float_t fgkFEAwidth1 = 19.;
+ //const Float_t fgkFEAwidth2 = 38.5;
+
+ Int_t *idtmed = fIdtmed->GetArray()-499;
+
+ Int_t idrotm[1];
+
+ // Definition of the air card containers (FAIA and FAIB)
+
+ Float_t par[3];
+ par[0] = xtof*0.5;
+ par[1] = (ytof*0.5 - fgkModuleCoverThickness)*0.5;
+ par[2] = zlenA*0.5;
+ gMC->Gsvolu("FAIA", "BOX ", idtmed[500], par, 3); // Air
+ if (fTOFHoles) gMC->Gsvolu("FAIB", "BOX ", idtmed[500], par, 3); // Air
+
+ // FEA card mother-volume definition
+ Float_t carpar[3] = {fgkFEAwidth1*0.5, 5.6, 0.45};
+ gMC->Gsvolu("FCA1", "BOX ", idtmed[500], carpar, 3); // Air
+ carpar[0] = fgkFEAwidth2*0.5;
+ //carpar[1] = 5.6;
+ //carpar[2] = 0.45;
+ gMC->Gsvolu("FCA2", "BOX ", idtmed[500], carpar, 3); // Air
+
+ // rotation matrix
+ AliMatrix(idrotm[0], 90.,180., 90., 90.,180., 0.);
+
+ // FEA card mother-volume positioning
+ Float_t rowstep = 6.66;
+ Float_t rowgap[5] = {13.5, 22.9, 16.94, 23.8, 20.4};
+ Int_t rowb[5] = {6, 7, 6, 19, 7};
+ Float_t carpos[3] = {25. - xtof*0.5,
+ (11.5 - (ytof*0.5 - fgkModuleCoverThickness))*0.5,
+ 0.};
+ Int_t row = 1;
+ Int_t nrow = 0;
+ for (Int_t sg= -1; sg< 2; sg+= 2) {
+ carpos[2] = sg*zlenA*0.5;
+ for (Int_t nb=0; nb<5; ++nb) {
+ carpos[2] = carpos[2] - sg*(rowgap[nb] - rowstep);
+ nrow = row + rowb[nb];
+ for ( ; row < nrow ; ++row) {
+
+ carpos[2] -= sg*rowstep;
+
+ if (nb==4) {
+ gMC->Gspos("FCA1",2*row, "FAIA", carpos[0],carpos[1],carpos[2], 0,"ONLY");
+ gMC->Gspos("FCA1",2*row-1,"FAIA",-carpos[0],carpos[1],carpos[2], 0,"ONLY");
+ gMC->Gspos("FCA2", row, "FAIA", 0.,carpos[1],carpos[2], 0,"ONLY");
+
+ }
+ else {
+ switch (sg) {
+ case 1:
+ gMC->Gspos("FCA1",2*row, "FAIA", carpos[0],carpos[1],carpos[2], 0,"ONLY");
+ gMC->Gspos("FCA1",2*row-1,"FAIA",-carpos[0],carpos[1],carpos[2], 0,"ONLY");
+ gMC->Gspos("FCA2", row, "FAIA", 0.,carpos[1],carpos[2], 0,"ONLY");
+ break;
+ case -1:
+ gMC->Gspos("FCA1",2*row, "FAIA", carpos[0],carpos[1],carpos[2], idrotm[0],"ONLY");
+ gMC->Gspos("FCA1",2*row-1,"FAIA",-carpos[0],carpos[1],carpos[2], idrotm[0],"ONLY");
+ gMC->Gspos("FCA2", row, "FAIA", 0.,carpos[1],carpos[2], idrotm[0],"ONLY");
+ break;
+ }
+
+ }
+ }
+ }
+ }
+
+ gMC->Gspos("FCA1", 182, "FAIA", carpos[0],carpos[1],0., 0,"ONLY");
+ gMC->Gspos("FCA1", 181, "FAIA",-carpos[0],carpos[1],0., 0,"ONLY");
+ gMC->Gspos("FCA2", 91, "FAIA", 0., carpos[1], 0., 0, "ONLY");
+
+ if (fTOFHoles) {
+ row = 1;
+ for (Int_t sg= -1; sg< 2; sg+= 2) {
+ carpos[2] = sg*zlenA*0.5;
+ for (Int_t nb=0; nb<4; ++nb) {
+ carpos[2] = carpos[2] - sg*(rowgap[nb] - rowstep);
+ nrow = row + rowb[nb];
+ for ( ; row < nrow ; ++row) {
+ carpos[2] -= sg*rowstep;
+
+ switch (sg) {
+ case 1:
+ gMC->Gspos("FCA1",2*row, "FAIB", carpos[0],carpos[1],carpos[2], 0,"ONLY");
+ gMC->Gspos("FCA1",2*row-1,"FAIB",-carpos[0],carpos[1],carpos[2], 0,"ONLY");
+ gMC->Gspos("FCA2", row, "FAIB", 0.,carpos[1],carpos[2], 0,"ONLY");
+ break;
+ case -1:
+ gMC->Gspos("FCA1",2*row, "FAIB", carpos[0],carpos[1],carpos[2], idrotm[0],"ONLY");
+ gMC->Gspos("FCA1",2*row-1,"FAIB",-carpos[0],carpos[1],carpos[2], idrotm[0],"ONLY");
+ gMC->Gspos("FCA2", row, "FAIB", 0.,carpos[1],carpos[2], idrotm[0],"ONLY");
+ break;
+ }
+ }
+ }
+ }
+ }
+
+}
+
+//_____________________________________________________________________________
+void AliTOFv6T0::MakeFrontEndElectronics() const
+{
+ //
+ // Fill FCA1/2 volumes with FEA cards (FFEA volumes).
+ //
+
+ Int_t *idtmed = fIdtmed->GetArray()-499;
+
+ //const Float_t fgkFEAwidth1 = 19.;
+
+ // FEA card volume definition
+ Float_t feaParam1[3] = {fgkFEAwidth1*0.5, 5.6, 0.1};
+ gMC->Gsvolu("FFEA", "BOX ", idtmed[502], feaParam1, 3); // G10
+
+ // FEA card volume positioning
+ Float_t carpar[3] = {fgkFEAwidth1*0.5, 5.6, 0.45};
+ gMC->Gspos("FFEA", 1, "FCA1", 0., 0., -carpar[2]+feaParam1[2], 0, "ONLY");
+ gMC->Gspos("FFEA", 2, "FCA2", -(feaParam1[0]+0.25), 0., -carpar[2]+feaParam1[2], 0, "ONLY");
+ gMC->Gspos("FFEA", 3, "FCA2", (feaParam1[0]+0.25), 0., -carpar[2]+feaParam1[2], 0, "ONLY");
+
+}
+
+//_____________________________________________________________________________
+void AliTOFv6T0::MakeFEACooling(Float_t xtof, Float_t ytof, Float_t zlenA) const
+{
+ //
+ // Make cooling system attached to each FEA card
+ // (FAL1, FRO1 and FBAR/1/2 volumes)
+ // in FAIA/B and FCA1/2 volume containers.
+ //
+
+ // honeycomb layer between strips and cards (cm)
+ //const Float_t fgkModuleCoverThickness = 2.;
+
+ Int_t *idtmed = fIdtmed->GetArray()-499;
+
+ //const Float_t fgkFEAwidth1 = 19.;
+
+ Float_t feaParam1[3] = {fgkFEAwidth1*0.5, 5.6, 0.1};
+
+ // first FEA cooling element definition
+ Float_t al1[3] = {fgkFEAwidth1*0.5, 0.4, 0.2};
+ gMC->Gsvolu("FAL1", "BOX ", idtmed[504], al1, 3); // Al
+ // first FEA cooling element positioning
+ Float_t carpar[3] = {fgkFEAwidth1*0.5, 5.6, 0.45};
gMC->Gspos("FAL1", 1, "FCA1", 0., carpar[1]-al1[1], -carpar[2]+2.*feaParam1[2]+al1[2], 0, "ONLY");
- gMC->Gspos("FAL3", 1, "FCA1", 0., carpar[1]-al3[1], carpar[2]-al3[2], 0, "ONLY");
- gMC->Gspos("FAL2", 1, "FCA1", 0., carpar[1]-2.*al3[1], carpar[2]-2.*al3[2]-al2[2], 0, "ONLY");
+ gMC->Gspos("FAL1", 2, "FCA2", -(feaParam1[0]+0.25), carpar[1]-al1[1], -carpar[2]+2.*feaParam1[2]+al1[2], 0, "ONLY");
+ gMC->Gspos("FAL1", 3, "FCA2", (feaParam1[0]+0.25), carpar[1]-al1[1], -carpar[2]+2.*feaParam1[2]+al1[2], 0, "ONLY");
+
+ // second FEA cooling element difinition
+ //Float_t feaRoof1[3] = {9.5, 0.2, 1.45};
+ Float_t feaRoof1[3] = {al1[0], al1[2], 1.45};
+ gMC->Gsvolu("FRO1", "BOX ", idtmed[504], feaRoof1, 3); // Al
+
+ // third FEA cooling element difinition
+ Float_t bar[3] = {8.575, 0.6, 0.25};
+ gMC->Gsvolu("FBAR", "BOX ", idtmed[504], bar, 3); // Al
+
+ // fourth FEA cooling element difinition
+ //Float_t bar1[3] = {8.575, 0.6, 0.1};
+ Float_t bar1[3] = {bar[0], bar[1], 0.1};
+ gMC->Gsvolu("FBA1", "BOX ", idtmed[504], bar1, 3); // Al
+
+ // fifth FEA cooling element difinition
+ //Float_t bar2[3] = {8.575, 0.1, 0.4};
+ Float_t bar2[3] = {bar[0], 0.1, bar[1]-2.*bar[2]};
+ gMC->Gsvolu("FBA2", "BOX ", idtmed[504], bar2, 3); // Al
+
+ //const Float_t fgkCBLw = 13.5; // width of lateral cables and tubes block
+
+ Float_t tubepar[3] = {0., 0.4, xtof*0.5 - fgkCBLw};
+
+ // FEA cooling components positioning
+ Float_t rowstep = 6.66;
+ Float_t rowgap[5] = {13.5, 22.9, 16.94, 23.8, 20.4};
+ Int_t rowb[5] = {6, 7, 6, 19, 7};
+ Float_t carpos[3] = {25. - xtof*0.5,
+ (11.5 - (ytof*0.5 - fgkModuleCoverThickness))*0.5,
+ 0.};
+ Int_t row = 1;
+ Int_t nrow = 0;
+ for (Int_t sg= -1; sg< 2; sg+= 2) {
+ carpos[2] = sg*zlenA*0.5;
+ for (Int_t nb=0; nb<5; ++nb) {
+ carpos[2] = carpos[2] - sg*(rowgap[nb] - rowstep);
+ nrow = row + rowb[nb];
+ for ( ; row < nrow ; ++row) {
+
+ carpos[2] -= sg*rowstep;
+
+ if (nb==4) {
+
+ gMC->Gspos("FBAR",4*row, "FAIA", carpos[0],carpos[1]+carpar[1]-bar[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[2]), 0,"ONLY");
+ gMC->Gspos("FBAR",4*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]-bar[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[2]), 0,"ONLY");
+ gMC->Gspos("FBAR",4*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]-bar[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[2]), 0,"ONLY");
+ gMC->Gspos("FBAR",4*row-3,"FAIA",-carpos[0],carpos[1]+carpar[1]-bar[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[2]), 0,"ONLY");
+
+ gMC->Gspos("FBA1",4*row, "FAIA", carpos[0],carpos[1]+carpar[1]-bar[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-2.*tubepar[1]-bar1[2]), 0,"ONLY");
+ gMC->Gspos("FBA1",4*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]-bar[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-2.*tubepar[1]-bar1[2]), 0,"ONLY");
+ gMC->Gspos("FBA1",4*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]-bar[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-2.*tubepar[1]-bar1[2]), 0,"ONLY");
+ gMC->Gspos("FBA1",4*row-3,"FAIA",-carpos[0],carpos[1]+carpar[1]-bar[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-2.*tubepar[1]-bar1[2]), 0,"ONLY");
+
+ gMC->Gspos("FBA2",8*row, "FAIA", carpos[0],carpos[1]+carpar[1]-bar2[1], carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
+ gMC->Gspos("FBA2",8*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]-bar2[1], carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
+ gMC->Gspos("FBA2",8*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]-bar2[1], carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
+ gMC->Gspos("FBA2",8*row-3,"FAIA",-carpos[0],carpos[1]+carpar[1]-bar2[1], carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
+
+ gMC->Gspos("FBA2",8*row-4,"FAIA", carpos[0],carpos[1]+carpar[1]-3.*bar2[1]-2.*tubepar[1], carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
+ gMC->Gspos("FBA2",8*row-5,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]-3.*bar2[1]-2.*tubepar[1], carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
+ gMC->Gspos("FBA2",8*row-6,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]-3.*bar2[1]-2.*tubepar[1], carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
+ gMC->Gspos("FBA2",8*row-7,"FAIA",-carpos[0],carpos[1]+carpar[1]-3.*bar2[1]-2.*tubepar[1], carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
+
+
+ gMC->Gspos("FRO1",4*row, "FAIA", carpos[0],carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
+ gMC->Gspos("FRO1",4*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
+ gMC->Gspos("FRO1",4*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
+ gMC->Gspos("FRO1",4*row-3,"FAIA",-carpos[0],carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
+
+ }
+ else {
+
+ gMC->Gspos("FBAR",4*row, "FAIA", carpos[0],carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[2]), 0,"ONLY");
+ gMC->Gspos("FBAR",4*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[2]), 0,"ONLY");
+ gMC->Gspos("FBAR",4*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[2]), 0,"ONLY");
+ gMC->Gspos("FBAR",4*row-3,"FAIA",-carpos[0],carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[2]), 0,"ONLY");
+
+ gMC->Gspos("FBA1",4*row, "FAIA", carpos[0],carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-2.*tubepar[1]-bar1[2]), 0,"ONLY");
+ gMC->Gspos("FBA1",4*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-2.*tubepar[1]-bar1[2]), 0,"ONLY");
+ gMC->Gspos("FBA1",4*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-2.*tubepar[1]-bar1[2]), 0,"ONLY");
+ gMC->Gspos("FBA1",4*row-3,"FAIA",-carpos[0],carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-2.*tubepar[1]-bar1[2]), 0,"ONLY");
+
+ gMC->Gspos("FBA2",8*row, "FAIA", carpos[0],carpos[1]+carpar[1]-bar2[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
+ gMC->Gspos("FBA2",8*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]-bar2[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
+ gMC->Gspos("FBA2",8*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]-bar2[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
+ gMC->Gspos("FBA2",8*row-3,"FAIA",-carpos[0],carpos[1]+carpar[1]-bar2[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
+
+ gMC->Gspos("FBA2",8*row-4,"FAIA", carpos[0],carpos[1]+carpar[1]-3.*bar2[1]-2.*tubepar[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
+ gMC->Gspos("FBA2",8*row-5,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]-3.*bar2[1]-2.*tubepar[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
+ gMC->Gspos("FBA2",8*row-6,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]-3.*bar2[1]-2.*tubepar[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
+ gMC->Gspos("FBA2",8*row-7,"FAIA",-carpos[0],carpos[1]+carpar[1]-3.*bar2[1]-2.*tubepar[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
+
+ gMC->Gspos("FRO1",4*row, "FAIA", carpos[0],carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
+ gMC->Gspos("FRO1",4*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
+ gMC->Gspos("FRO1",4*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
+ gMC->Gspos("FRO1",4*row-3,"FAIA",-carpos[0],carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
+
+ }
+ }
+ }
+ }
+
+ gMC->Gspos("FBAR",364, "FAIA", carpos[0],carpos[1]+carpar[1]-bar[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[2]), 0,"ONLY");
+ gMC->Gspos("FBAR",363, "FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]-bar[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[2]), 0,"ONLY");
+ gMC->Gspos("FBAR",362, "FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]-bar[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[2]), 0,"ONLY");
+ gMC->Gspos("FBAR",361, "FAIA",-carpos[0],carpos[1]+carpar[1]-bar[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[2]), 0,"ONLY");
+
+ gMC->Gspos("FBA1",364, "FAIA", carpos[0],carpos[1]+carpar[1]-bar[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-2.*tubepar[1]-bar1[2]), 0,"ONLY");
+ gMC->Gspos("FBA1",363, "FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]-bar[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-2.*tubepar[1]-bar1[2]), 0,"ONLY");
+ gMC->Gspos("FBA1",362, "FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]-bar[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-2.*tubepar[1]-bar1[2]), 0,"ONLY");
+ gMC->Gspos("FBA1",361, "FAIA",-carpos[0],carpos[1]+carpar[1]-bar[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-2.*tubepar[1]-bar1[2]), 0,"ONLY");
+
+ gMC->Gspos("FBA2",728, "FAIA", carpos[0],carpos[1]+carpar[1]-bar2[1], -(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
+ gMC->Gspos("FBA2",727, "FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]-bar2[1], -(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
+ gMC->Gspos("FBA2",726, "FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]-bar2[1], -(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
+ gMC->Gspos("FBA2",725, "FAIA",-carpos[0],carpos[1]+carpar[1]-bar2[1], -(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
+
+ gMC->Gspos("FBA2",724,"FAIA", carpos[0],carpos[1]+carpar[1]-3.*bar2[1]-2.*tubepar[1], -(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
+ gMC->Gspos("FBA2",723,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]-3.*bar2[1]-2.*tubepar[1], -(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
+ gMC->Gspos("FBA2",722,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]-3.*bar2[1]-2.*tubepar[1], -(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
+ gMC->Gspos("FBA2",721,"FAIA",-carpos[0],carpos[1]+carpar[1]-3.*bar2[1]-2.*tubepar[1], -(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
+
+ gMC->Gspos("FRO1",364, "FAIA", carpos[0],carpos[1]+carpar[1]+feaRoof1[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
+ gMC->Gspos("FRO1",363, "FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof1[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
+ gMC->Gspos("FRO1",362, "FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof1[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
+ gMC->Gspos("FRO1",361, "FAIA",-carpos[0],carpos[1]+carpar[1]+feaRoof1[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
+
+
+ if (fTOFHoles) {
+ row = 1;
+ for (Int_t sg= -1; sg< 2; sg+= 2) {
+ carpos[2] = sg*zlenA*0.5;
+ for (Int_t nb=0; nb<4; ++nb) {
+ carpos[2] = carpos[2] - sg*(rowgap[nb] - rowstep);
+ nrow = row + rowb[nb];
+ for ( ; row < nrow ; ++row) {
+ carpos[2] -= sg*rowstep;
+
+ gMC->Gspos("FBAR",4*row, "FAIB", carpos[0],carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[2]), 0,"ONLY");
+ gMC->Gspos("FBAR",4*row-1,"FAIB", (feaParam1[0]+0.25),carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[2]), 0,"ONLY");
+ gMC->Gspos("FBAR",4*row-2,"FAIB",-(feaParam1[0]+0.25),carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[2]), 0,"ONLY");
+ gMC->Gspos("FBAR",4*row-3,"FAIB",-carpos[0],carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[2]), 0,"ONLY");
+
+ gMC->Gspos("FBA1",4*row, "FAIB", carpos[0],carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-2.*tubepar[1]-bar1[2]), 0,"ONLY");
+ gMC->Gspos("FBA1",4*row-1,"FAIB", (feaParam1[0]+0.25),carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-2.*tubepar[1]-bar1[2]), 0,"ONLY");
+ gMC->Gspos("FBA1",4*row-2,"FAIB",-(feaParam1[0]+0.25),carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-2.*tubepar[1]-bar1[2]), 0,"ONLY");
+ gMC->Gspos("FBA1",4*row-3,"FAIB",-carpos[0],carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-2.*tubepar[1]-bar1[2]), 0,"ONLY");
+
+ gMC->Gspos("FBA2",8*row, "FAIB", carpos[0],carpos[1]+carpar[1]-bar2[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
+ gMC->Gspos("FBA2",8*row-1,"FAIB", (feaParam1[0]+0.25),carpos[1]+carpar[1]-bar2[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
+ gMC->Gspos("FBA2",8*row-2,"FAIB",-(feaParam1[0]+0.25),carpos[1]+carpar[1]-bar2[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
+ gMC->Gspos("FBA2",8*row-3,"FAIB",-carpos[0],carpos[1]+carpar[1]-bar2[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
+
+ gMC->Gspos("FBA2",8*row-4,"FAIB", carpos[0],carpos[1]+carpar[1]-3.*bar2[1]-2.*tubepar[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
+ gMC->Gspos("FBA2",8*row-5,"FAIB", (feaParam1[0]+0.25),carpos[1]+carpar[1]-3.*bar2[1]-2.*tubepar[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
+ gMC->Gspos("FBA2",8*row-6,"FAIB",-(feaParam1[0]+0.25),carpos[1]+carpar[1]-3.*bar2[1]-2.*tubepar[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
+ gMC->Gspos("FBA2",8*row-7,"FAIB",-carpos[0],carpos[1]+carpar[1]-3.*bar2[1]-2.*tubepar[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY");
+
+ gMC->Gspos("FRO1",4*row, "FAIB", carpos[0],carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
+ gMC->Gspos("FRO1",4*row-1,"FAIB", (feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
+ gMC->Gspos("FRO1",4*row-2,"FAIB",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
+ gMC->Gspos("FRO1",4*row-3,"FAIB",-carpos[0],carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
+ }
+ }
+ }
+ }
- gMC->Gspos("FFEA", 2, "FCA2", -(feaParam1[0]+0.25), 0., -carpar[2]+feaParam1[2], 0, "ONLY");
- gMC->Gspos("FAL1", 2, "FCA2", -(feaParam1[0]+0.25), carpar[1]-al1[1], -carpar[2]+2.*feaParam1[2]+al1[2], 0, "ONLY");
- gMC->Gspos("FAL3", 2, "FCA2", -(feaParam1[0]+0.25), carpar[1]-al3[1], carpar[2]-al3[2], 0, "ONLY");
- gMC->Gspos("FAL2", 2, "FCA2", -(feaParam1[0]+0.25), carpar[1]-2.*al3[1], carpar[2]-2.*al3[2]-al2[2], 0, "ONLY");
+}
- gMC->Gspos("FFEA", 3, "FCA2", (feaParam1[0]+0.25), 0., -carpar[2]+feaParam1[2], 0, "ONLY");
- gMC->Gspos("FAL1", 3, "FCA2", (feaParam1[0]+0.25), carpar[1]-al1[1], -carpar[2]+2.*feaParam1[2]+al1[2], 0, "ONLY");
+//_____________________________________________________________________________
+void AliTOFv6T0::MakeNinoMask(Float_t xtof, Float_t ytof, Float_t zlenA) const
+{
+ //
+ // Make cooling Nino mask
+ // for each FEA card (FAL2/3 and FRO2/3/4 volumes)
+ // in FAIA/B and FCA1/2 volume containers.
+ //
+
+ // honeycomb layer between strips and cards (cm)
+ //const Float_t fgkModuleCoverThickness = 2.;
+
+ Int_t *idtmed = fIdtmed->GetArray()-499;
+
+ //const Float_t fgkFEAwidth1 = 19.;
+
+ // first Nino ASIC mask volume definition
+ Float_t al2[3] = {7.25, 0.75, 0.25};
+ gMC->Gsvolu("FAL2", "BOX ", idtmed[504], al2, 3); // Al
+
+ // second Nino ASIC mask volume definition
+ Float_t al3[3] = {3., 3.75, 0.1};
+ gMC->Gsvolu("FAL3", "BOX ", idtmed[504], al3, 3); // Al
+
+ // first Nino ASIC mask volume positioning
+ Float_t feaParam1[3] = {fgkFEAwidth1*0.5, 5.6, 0.1};
+ Float_t carpar[3] = {fgkFEAwidth1*0.5, 5.6, 0.45};
+ gMC->Gspos("FAL2", 1, "FCA1", 0., carpar[1]-2.*al3[1]+0.25, carpar[2]-2.*al3[2]-al2[2], 0, "ONLY");
+ gMC->Gspos("FAL2", 2, "FCA2", -(feaParam1[0]+0.25), carpar[1]-2.*al3[1]+0.25, carpar[2]-2.*al3[2]-al2[2], 0, "ONLY");
+ gMC->Gspos("FAL2", 3, "FCA2", (feaParam1[0]+0.25), carpar[1]-2.*al3[1]+0.25, carpar[2]-2.*al3[2]-al2[2], 0, "ONLY");
+
+ // second Nino ASIC mask volume positioning
+ gMC->Gspos("FAL3", 1, "FCA1", 0., carpar[1]-al3[1], carpar[2]-al3[2], 0, "ONLY");
+ gMC->Gspos("FAL3", 2, "FCA2", -(feaParam1[0]+0.25), carpar[1]-al3[1], carpar[2]-al3[2], 0, "ONLY");
gMC->Gspos("FAL3", 3, "FCA2", (feaParam1[0]+0.25), carpar[1]-al3[1], carpar[2]-al3[2], 0, "ONLY");
- gMC->Gspos("FAL2", 3, "FCA2", (feaParam1[0]+0.25), carpar[1]-2.*al3[1], carpar[2]-2.*al3[2]-al2[2], 0, "ONLY");
-
- Float_t feaRoof1[3] = {9.5, 0.25, 1.7};
- gMC->Gsvolu("FRO1", "BOX ", idtmed[505], feaRoof1, 3); // Aluminium
- Float_t feaRoof2[3] = {3.35, 0.05, 1.5};
- gMC->Gsvolu("FRO2", "BOX ", idtmed[505], feaRoof2, 3); // Aluminium
- Float_t feaRoof3[3] = {3.35, feaRoof1[1]+feaRoof2[1], 0.1};
- gMC->Gsvolu("FRO3", "BOX ", idtmed[505], feaRoof3, 3); // Aluminium
-
- Float_t feaRoof4[3] = {3.35,
- 0.05,
- carpar[2]-feaParam1[2]-al1[2]-al3[2]};
- gMC->Gsvolu("FRO4", "BOX ", idtmed[505], feaRoof4, 3); // Aluminium
-
- Float_t bar[3] = {8.575, 0.6, 0.15};
- gMC->Gsvolu("FBAR", "BOX ", idtmed[505], bar, 3); // Aluminium
-
-
- // tube volume definition
- Float_t tubepar[3] = {0., 0.4, xFLT*0.5-15.};
- gMC->Gsvolu("FTUB", "TUBE", idtmed[513], tubepar, 3); // copper cooling tubes
- //tubepar[0]= 0.;
- tubepar[1]= 0.3;
- //tubepar[2]= xFLT*0.5 - 15.;
- gMC->Gsvolu("FITU", "TUBE", idtmed[510], tubepar, 3); // cooling water
- // Positioning of the water tube into the steel one
- gMC->Gspos("FITU",1,"FTUB",0.,0.,0.,0,"ONLY");
- // cable
- Float_t cbpar[3] = {0., 0.5, tubepar[2]};
- gMC->Gsvolu("FCAB", "TUBE", idtmed[511], cbpar, 3); // copper+alu
+ //Float_t feaRoof1[3] = {9.5, 0.2, 1.45};
+ Float_t feaRoof1[3] = {fgkFEAwidth1*0.5, 0.2, 1.45};
- // Alluminium components
- Float_t lonpar[3] = {tubepar[2], 6.15, 0.7};
- gMC->Gsvolu("FTLN", "BOX ", idtmed[505], lonpar, 3); // alluminium
- lonpar[0] = 2.;
- lonpar[1] = 1.;
- lonpar[2] = zlenA*0.5;
- gMC->Gsvolu("FLON", "BOX ", idtmed[505], lonpar, 3); // alluminium
+ // third Nino ASIC mask volume definition
+ //Float_t feaRoof2[3] = {3.35, 0.05, 1.05};
+ Float_t feaRoof2[3] = {al3[0], 0.05, 1.05};
+ gMC->Gsvolu("FRO2", "BOX ", idtmed[504], feaRoof2, 3); // Al
- // rotation matrix
- AliMatrix(idrotm[99], 180., 90., 90., 90., 90., 0.);
- AliMatrix(idrotm[98], 90.,180., 90., 90.,180., 0.);
+ // fourth Nino ASIC mask volume definition
+ //Float_t feaRoof3[3] = {3.35, feaRoof1[1]+feaRoof2[1], 0.1};
+ Float_t feaRoof3[3] = {al3[0], feaRoof1[1]+feaRoof2[1], 0.1};
+ gMC->Gsvolu("FRO3", "BOX ", idtmed[504], feaRoof3, 3); // Al
- // cards, tubes, cables positioning
- Float_t carpos[3], rowstep = 6.66, ytub= 3.65, ycab= ytub-3.;
+ // fifth Nino ASIC mask volume definition
+ Float_t feaRoof4[3] = {al3[0], 0.05, carpar[2]-feaParam1[2]-feaRoof1[1]-al3[2]};
+ gMC->Gsvolu("FRO4", "BOX ", idtmed[504], feaRoof4, 3); // Al
+
+ // other Nino ASIC mask volumes positioning
+ Float_t rowstep = 6.66;
Float_t rowgap[5] = {13.5, 22.9, 16.94, 23.8, 20.4};
- Int_t row, rowb[5] = {6, 7, 6, 19, 7}, nrow;
- carpos[0] = 25. - xtof*0.5;
- carpos[1] = (11.5 - (ytof*0.5 - kHoneycombLayerThickness))*0.5;
- row = 1;
+ Int_t rowb[5] = {6, 7, 6, 19, 7};
+ Float_t carpos[3] = {25. - xtof*0.5,
+ (11.5 - (ytof*0.5 - fgkModuleCoverThickness))*0.5,
+ 0.};
+ Int_t row = 1;
+ Int_t nrow = 0;
for (Int_t sg= -1; sg< 2; sg+= 2) {
carpos[2] = sg*zlenA*0.5;
for (Int_t nb=0; nb<5; ++nb) {
carpos[2] -= sg*rowstep;
if (nb==4) {
- gMC->Gspos("FCA1",2*row, "FAIA", carpos[0],carpos[1],carpos[2], 0,"ONLY");
- gMC->Gspos("FCA1",2*row-1,"FAIA",-carpos[0],carpos[1],carpos[2], 0,"ONLY");
- gMC->Gspos("FCA2", row, "FAIA", 0., carpos[1], carpos[2], 0, "ONLY");
-
- //gMC->Gspos("FTUB", row, "FAIA", 0., ytub, carpos[2]-sg, idrotm[99], "ONLY");
- gMC->Gspos("FTUB", row, "FAIA", 0., carpos[1]+carpar[1]-bar[1], carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[1]), idrotm[99], "ONLY");
- gMC->Gspos("FCAB", row, "FAIA", 0., ycab, carpos[2]-1.1, idrotm[99], "ONLY");
-
- gMC->Gspos("FRO1",4*row, "FAIA", carpos[0],carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
- gMC->Gspos("FRO1",4*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
- gMC->Gspos("FRO1",4*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
- gMC->Gspos("FRO1",4*row-3,"FAIA",-carpos[0],carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
gMC->Gspos("FRO2",4*row, "FAIA", carpos[0],carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],carpos[2]+(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY");
gMC->Gspos("FRO2",4*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],carpos[2]+(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY");
gMC->Gspos("FRO4",4*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],carpos[2]+(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY");
gMC->Gspos("FRO4",4*row-3,"FAIA",-carpos[0], carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],carpos[2]+(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY");
- gMC->Gspos("FBAR",4*row, "FAIA", carpos[0],carpos[1]+carpar[1]-bar[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[1]), 0,"ONLY");
- gMC->Gspos("FBAR",4*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+-bar[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[1]), 0,"ONLY");
- gMC->Gspos("FBAR",4*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+-bar[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[1]), 0,"ONLY");
- gMC->Gspos("FBAR",4*row-3,"FAIA",-carpos[0],carpos[1]+carpar[1]-bar[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[1]), 0,"ONLY");
-
}
else {
- switch (sg) {
- case 1:
- gMC->Gspos("FCA1",2*row, "FAIA", carpos[0],carpos[1],carpos[2], 0,"ONLY");
- gMC->Gspos("FCA1",2*row-1,"FAIA",-carpos[0],carpos[1],carpos[2], 0,"ONLY");
- gMC->Gspos("FCA2", row, "FAIA", 0., carpos[1], carpos[2], 0, "ONLY");
- break;
- case -1:
- gMC->Gspos("FCA1",2*row, "FAIA", carpos[0],carpos[1],carpos[2], idrotm[98],"ONLY");
- gMC->Gspos("FCA1",2*row-1,"FAIA",-carpos[0],carpos[1],carpos[2], idrotm[98],"ONLY");
- gMC->Gspos("FCA2", row, "FAIA", 0., carpos[1], carpos[2], idrotm[98], "ONLY");
- break;
- }
-
- //gMC->Gspos("FTUB", row, "FAIA", 0., ytub, carpos[2]-sg, idrotm[99], "ONLY");
- gMC->Gspos("FTUB", row, "FAIA", 0., carpos[1]+carpar[1]-bar[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[1]), idrotm[99], "ONLY");
- gMC->Gspos("FCAB", row, "FAIA", 0., ycab, carpos[2]-sg*1.1, idrotm[99], "ONLY");
-
- gMC->Gspos("FRO1",4*row, "FAIA", carpos[0],carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
- gMC->Gspos("FRO1",4*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
- gMC->Gspos("FRO1",4*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
- gMC->Gspos("FRO1",4*row-3,"FAIA",-carpos[0],carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
gMC->Gspos("FRO2",4*row, "FAIA", carpos[0],carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],carpos[2]+sg*(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY");
gMC->Gspos("FRO2",4*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],carpos[2]+sg*(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY");
gMC->Gspos("FRO4",4*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],carpos[2]+sg*(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY");
gMC->Gspos("FRO4",4*row-3,"FAIA",-carpos[0], carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],carpos[2]+sg*(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY");
- gMC->Gspos("FBAR",4*row, "FAIA", carpos[0],carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[1]), 0,"ONLY");
- gMC->Gspos("FBAR",4*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[1]), 0,"ONLY");
- gMC->Gspos("FBAR",4*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[1]), 0,"ONLY");
- gMC->Gspos("FBAR",4*row-3,"FAIA",-carpos[0],carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[1]), 0,"ONLY");
-
}
}
}
- gMC->Gspos("FTLN", 5+4*sg, "FAIA", 0., -0.1, 369.9*sg, 0, "ONLY");
- gMC->Gspos("FTLN", 5+3*sg, "FAIA", 0., -0.1, 366.9*sg, 0, "ONLY");
- gMC->Gspos("FTLN", 5+2*sg, "FAIA", 0., -0.1, 198.8*sg, 0, "ONLY");
- gMC->Gspos("FTLN", 5+sg, "FAIA", 0., -0.1, 56.82*sg, 0, "ONLY");
}
- gMC->Gspos("FCA1", 182, "FAIA", carpos[0],carpos[1],0., 0,"ONLY");
- gMC->Gspos("FCA1", 181, "FAIA",-carpos[0],carpos[1],0., 0,"ONLY");
- gMC->Gspos("FCA2", 91, "FAIA", 0., carpos[1], 0., 0, "ONLY");
-
- //gMC->Gspos("FTUB", 91, "FAIA", 0., ytub, -1., idrotm[99], "ONLY");
- gMC->Gspos("FTUB", 91, "FAIA", 0., carpos[1]+carpar[1]-bar[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[1]), idrotm[99], "ONLY");
- gMC->Gspos("FCAB", 91, "FAIA", 0., ycab, -1.1, idrotm[99], "ONLY");
-
- gMC->Gspos("FRO1",364, "FAIA", carpos[0],carpos[1]+carpar[1]+feaRoof1[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
- gMC->Gspos("FRO1",363, "FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof1[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
- gMC->Gspos("FRO1",362, "FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof1[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
- gMC->Gspos("FRO1",361, "FAIA",-carpos[0],carpos[1]+carpar[1]+feaRoof1[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
gMC->Gspos("FRO2",364, "FAIA", carpos[0],carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY");
gMC->Gspos("FRO2",363, "FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY");
gMC->Gspos("FRO4",362, "FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY");
gMC->Gspos("FRO4",361, "FAIA",-carpos[0], carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY");
- gMC->Gspos("FBAR",364, "FAIA", carpos[0],carpos[1]+carpar[1]-bar[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[1]), 0,"ONLY");
- gMC->Gspos("FBAR",363, "FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+-bar[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[1]), 0,"ONLY");
- gMC->Gspos("FBAR",362, "FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+-bar[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[1]), 0,"ONLY");
- gMC->Gspos("FBAR",361, "FAIA",-carpos[0],carpos[1]+carpar[1]-bar[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[1]), 0,"ONLY");
-
- gMC->Gspos("FLON", 2, "FAIA",-24., ytub+1.4, 0., 0, "MANY");
- gMC->Gspos("FLON", 1, "FAIA", 24., ytub+1.4, 0., 0, "MANY");
-
if (fTOFHoles) {
row = 1;
for ( ; row < nrow ; ++row) {
carpos[2] -= sg*rowstep;
- switch (sg) {
- case 1:
- gMC->Gspos("FCA1",2*row, "FAIB", carpos[0],carpos[1],carpos[2], 0,"ONLY");
- gMC->Gspos("FCA1",2*row-1,"FAIB",-carpos[0],carpos[1],carpos[2], 0,"ONLY");
- gMC->Gspos("FCA2", row, "FAIB", 0., carpos[1], carpos[2], 0, "ONLY");
- break;
- case -1:
- gMC->Gspos("FCA1",2*row, "FAIB", carpos[0],carpos[1],carpos[2], idrotm[98],"ONLY");
- gMC->Gspos("FCA1",2*row-1,"FAIB",-carpos[0],carpos[1],carpos[2], idrotm[98],"ONLY");
- gMC->Gspos("FCA2", row, "FAIB", 0., carpos[1], carpos[2], idrotm[98], "ONLY");
- break;
- }
-
- //gMC->Gspos("FTUB", row, "FAIB", 0., ytub,carpos[2]-sg, idrotm[99], "ONLY");
- gMC->Gspos("FTUB", row, "FAIB", 0., carpos[1]+carpar[1]-bar[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[1]), idrotm[99], "ONLY");
- gMC->Gspos("FCAB", row, "FAIB", 0., ycab,carpos[2]-sg*1.1, idrotm[99], "ONLY");
-
- gMC->Gspos("FRO1",4*row, "FAIB", carpos[0],carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
- gMC->Gspos("FRO1",4*row-1,"FAIB", (feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
- gMC->Gspos("FRO1",4*row-2,"FAIB",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
- gMC->Gspos("FRO1",4*row-3,"FAIB",-carpos[0],carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
-
gMC->Gspos("FRO2",4*row, "FAIB", carpos[0],carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],carpos[2]+sg*(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY");
gMC->Gspos("FRO2",4*row-1,"FAIB", (feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],carpos[2]+sg*(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY");
gMC->Gspos("FRO2",4*row-2,"FAIB",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],carpos[2]+sg*(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY");
gMC->Gspos("FRO4",4*row-2,"FAIB",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],carpos[2]+sg*(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY");
gMC->Gspos("FRO4",4*row-3,"FAIB",-carpos[0], carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],carpos[2]+sg*(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY");
- gMC->Gspos("FBAR",4*row, "FAIB", carpos[0],carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[1]), 0,"ONLY");
- gMC->Gspos("FBAR",4*row-1,"FAIB", (feaParam1[0]+0.25),carpos[1]+carpar[1]+-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[1]), 0,"ONLY");
- gMC->Gspos("FBAR",4*row-2,"FAIB",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[1]), 0,"ONLY");
- gMC->Gspos("FBAR",4*row-3,"FAIB",-carpos[0],carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[1]), 0,"ONLY");
+ }
+ }
+ }
+ }
+
+}
+
+//_____________________________________________________________________________
+void AliTOFv6T0::MakeSuperModuleCooling(Float_t xtof, Float_t ytof, Float_t zlenA) const
+{
+ //
+ // Make cooling tubes (FTUB volume)
+ // and cooling bars (FTLN and FLTN volumes)
+ // in FAIA/B volume containers.
+ //
+
+ //const Float_t fgkInterCentrModBorder2 = 57.5;
+
+ // honeycomb layer between strips and cards (cm)
+ //const Float_t fgkModuleCoverThickness = 2.;
+
+ Int_t *idtmed = fIdtmed->GetArray()-499;
+
+ Int_t idrotm[1];
+
+ //const Float_t fgkFEAwidth1 = 19.;
+
+ //const Float_t fgkCBLw = 13.5; // width of lateral cables and tubes block
+ //const Float_t fgkSawThickness = 1.;
+
+ // cooling tube volume definition
+ Float_t tubepar[3] = {0., 0.4, xtof*0.5 - fgkCBLw - fgkSawThickness};
+ gMC->Gsvolu("FTUB", "TUBE", idtmed[512], tubepar, 3); // Cu
+
+ // water cooling tube volume definition
+ Float_t tubeparW[3] = {0., 0.3, tubepar[2]};
+ gMC->Gsvolu("FITU", "TUBE", idtmed[509], tubeparW, 3); // H2O
+
+ // Positioning of the water tube into the steel one
+ gMC->Gspos("FITU",1,"FTUB",0.,0.,0.,0,"ONLY");
+
+ // definition of transverse components of SM cooling system
+ Float_t lonpar[3] = {tubepar[2], 6.15, 0.7};
+ gMC->Gsvolu("FTLN", "BOX ", idtmed[504], lonpar, 3); // Al
+ lonpar[0] = 2.;
+ lonpar[1] = 1.;
+ lonpar[2] = zlenA*0.5;
+ // definition of longitudinal components of SM cooling system
+ gMC->Gsvolu("FLON", "BOX ", idtmed[504], lonpar, 3); // Al
+ if (fTOFHoles) {
+ lonpar[2] = (zlenA*0.5 - fgkInterCentrModBorder2)*0.5;
+ gMC->Gsvolu("FLOB", "BOX ", idtmed[504], lonpar, 3); // Al
+ }
+
+ // rotation matrix
+ AliMatrix(idrotm[0], 180., 90., 90., 90., 90., 0.);
+
+ // Positioning of cooling tubes and transverse components of SM
+ // cooling system
+ Float_t carpar[3] = {fgkFEAwidth1*0.5, 5.6, 0.45};
+ Float_t feaParam1[3] = {fgkFEAwidth1*0.5, 5.6, 0.1};
+ Float_t al1[3] = {fgkFEAwidth1*0.5, 0.4, 0.2};
+ Float_t feaRoof1[3] = {al1[0], al1[2], 1.45};
+ Float_t bar[3] = {8.575, 0.6, 0.25};
+ Float_t rowstep = 6.66;
+ Float_t ytub= 3.65;
+ Float_t rowgap[5] = {13.5, 22.9, 16.94, 23.8, 20.4};
+ Int_t rowb[5] = {6, 7, 6, 19, 7};
+ Float_t carpos[3] = {25. - xtof*0.5,
+ (11.5 - (ytof*0.5 - fgkModuleCoverThickness))*0.5,
+ 0.};
+ Int_t row = 1;
+ Int_t nrow = 0;
+ for (Int_t sg= -1; sg< 2; sg+= 2) {
+ carpos[2] = sg*zlenA*0.5;
+ for (Int_t nb=0; nb<5; ++nb) {
+ carpos[2] = carpos[2] - sg*(rowgap[nb] - rowstep);
+ nrow = row + rowb[nb];
+ for ( ; row < nrow ; ++row) {
+
+ carpos[2] -= sg*rowstep;
+
+ if (nb==4)
+ gMC->Gspos("FTUB", row, "FAIA", 0., carpos[1]+carpar[1]-bar[1], carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), idrotm[0], "ONLY");
+ else
+ gMC->Gspos("FTUB", row, "FAIA", 0., carpos[1]+carpar[1]-bar[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), idrotm[0], "ONLY");
+ }
+ }
+ gMC->Gspos("FTLN", 5+4*sg, "FAIA", 0., -0.1, 369.9*sg, 0, "ONLY");
+ gMC->Gspos("FTLN", 5+3*sg, "FAIA", 0., -0.1, 366.9*sg, 0, "ONLY");
+ gMC->Gspos("FTLN", 5+2*sg, "FAIA", 0., -0.1, 198.8*sg, 0, "ONLY");
+ gMC->Gspos("FTLN", 5+sg, "FAIA", 0., -0.1, 56.82*sg, 0, "ONLY");
+ }
+
+ gMC->Gspos("FTUB", 91, "FAIA", 0., carpos[1]+carpar[1]-bar[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), idrotm[0], "ONLY");
+
+ gMC->Gspos("FLON", 2, "FAIA",-24., ytub+1.4, 0., 0, "MANY");
+ gMC->Gspos("FLON", 1, "FAIA", 24., ytub+1.4, 0., 0, "MANY");
+
+ if (fTOFHoles) {
+ row = 1;
+ for (Int_t sg= -1; sg< 2; sg+= 2) {
+ carpos[2] = sg*zlenA*0.5;
+ for (Int_t nb=0; nb<4; ++nb) {
+ carpos[2] = carpos[2] - sg*(rowgap[nb] - rowstep);
+ nrow = row + rowb[nb];
+ for ( ; row < nrow ; ++row) {
+ carpos[2] -= sg*rowstep;
+ gMC->Gspos("FTUB", row, "FAIB", 0., carpos[1]+carpar[1]-bar[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), idrotm[0], "ONLY");
}
}
+
gMC->Gspos("FTLN", 5+4*sg, "FAIB", 0., -0.1, 369.9*sg, 0, "ONLY");
gMC->Gspos("FTLN", 5+3*sg, "FAIB", 0., -0.1, 366.9*sg, 0, "ONLY");
gMC->Gspos("FTLN", 5+2*sg, "FAIB", 0., -0.1, 198.8*sg, 0, "ONLY");
gMC->Gspos("FTLN", 5+sg, "FAIB", 0., -0.1, 56.82*sg, 0, "ONLY");
}
- gMC->Gspos("FLON", 2, "FAIB",-24., ytub+1.4, 0., 0, "MANY");
- gMC->Gspos("FLON", 1, "FAIB", 24., ytub+1.4, 0., 0, "MANY");
+
+ gMC->Gspos("FLOB", 4, "FAIB",-24., ytub+1.4, (zlenA*0.5 + fgkInterCentrModBorder2)*0.5, 0, "MANY");
+ gMC->Gspos("FLOB", 3, "FAIB", 24., ytub+1.4, (zlenA*0.5 + fgkInterCentrModBorder2)*0.5, 0, "MANY");
+ gMC->Gspos("FLOB", 2, "FAIB",-24., ytub+1.4, -(zlenA*0.5 + fgkInterCentrModBorder2)*0.5, 0, "MANY");
+ gMC->Gspos("FLOB", 1, "FAIB", 24., ytub+1.4, -(zlenA*0.5 + fgkInterCentrModBorder2)*0.5, 0, "MANY");
+
+ }
+
+}
+
+//_____________________________________________________________________________
+void AliTOFv6T0::MakeSuperModuleServices(Float_t xtof, Float_t ytof, Float_t zlenA) const
+{
+ //
+ // Make signal cables (FCAB and FCBL/B volumes),
+ // supemodule cover (FCOV volume) and wall (FSAW volume)
+ // in FAIA/B volume containers.
+ //
+
+ //const Float_t fgkInterCentrModBorder2 = 57.5;
+
+ // honeycomb layer between strips and cards (cm)
+ //const Float_t fgkModuleCoverThickness = 2.;
+
+ Int_t *idtmed = fIdtmed->GetArray()-499;
+
+ Int_t idrotm[3];
+
+ //const Float_t fgkCBLw = 13.5; // width of lateral cables and tubes block
+ //const Float_t fgkSawThickness = 1.;
+ //const Float_t fgkFEAwidth1 = 19.;
+ //const Float_t fgkFEAwidth2 = 38.5;
+
+ Float_t tubepar[3] = {0., 0.4, xtof*0.5 - fgkCBLw - fgkSawThickness};
+
+ // FEA cables definition
+ Float_t cbpar[3] = {0., 0.5, (tubepar[2] - fgkFEAwidth2*0.5)*0.5};
+ gMC->Gsvolu("FCAB", "TUBE", idtmed[510], cbpar, 3); // copper+alu
+ cbpar[2] = (xtof*0.5 - fgkCBLw - fgkSawThickness - (xtof*0.5 - 25. + fgkFEAwidth1*0.5))*0.5;
+ gMC->Gsvolu("FCAL", "TUBE", idtmed[510], cbpar, 3); // copper+alu
+
+ // rotation matrix
+ AliMatrix(idrotm[0], 180., 90., 90., 90., 90., 0.);
+
+ // FEA cables positioning
+ Float_t rowstep = 6.66;
+ Float_t ytub= 3.65;
+ Float_t ycab= ytub-3.;
+ Float_t rowgap[5] = {13.5, 22.9, 16.94, 23.8, 20.4};
+ Int_t rowb[5] = {6, 7, 6, 19, 7};
+ Float_t carpos[3] = {25. - xtof*0.5,
+ (11.5 - (ytof*0.5 - fgkModuleCoverThickness))*0.5,
+ 0.};
+ Int_t row = 1;
+ Int_t nrow = 0;
+ Float_t xCable = (xtof*0.5 - fgkCBLw - fgkSawThickness + fgkFEAwidth2*0.5)*0.5;
+ Float_t xCableL = (xtof*0.5 - fgkCBLw - fgkSawThickness + (xtof*0.5 - 25. + fgkFEAwidth1*0.5))*0.5;
+ for (Int_t sg= -1; sg< 2; sg+= 2) {
+ carpos[2] = sg*zlenA*0.5;
+ for (Int_t nb=0; nb<5; ++nb) {
+ carpos[2] = carpos[2] - sg*(rowgap[nb] - rowstep);
+ nrow = row + rowb[nb];
+ for ( ; row < nrow ; ++row) {
+
+ carpos[2] -= sg*rowstep;
+
+ if (nb==4)
+ {
+ gMC->Gspos("FCAB", 2*row, "FAIA", xCable, ycab, carpos[2]-1.1, idrotm[0], "ONLY");
+ gMC->Gspos("FCAB", 2*row-1, "FAIA",-xCable, ycab, carpos[2]-1.1, idrotm[0], "ONLY");
+ gMC->Gspos("FCAL", 2*row, "FAIA", xCableL, ycab-2.*cbpar[1], carpos[2]-1.1, idrotm[0], "ONLY");
+ gMC->Gspos("FCAL", 2*row-1, "FAIA",-xCableL, ycab-2.*cbpar[1], carpos[2]-1.1, idrotm[0], "ONLY");
+ }
+ else
+ {
+ gMC->Gspos("FCAB", 2*row, "FAIA", xCable, ycab, carpos[2]-sg*1.1, idrotm[0], "ONLY");
+ gMC->Gspos("FCAB", 2*row-1, "FAIA",-xCable, ycab, carpos[2]-sg*1.1, idrotm[0], "ONLY");
+ gMC->Gspos("FCAL", 2*row, "FAIA", xCableL, ycab-2.*cbpar[1], carpos[2]-sg*1.1, idrotm[0], "ONLY");
+ gMC->Gspos("FCAL", 2*row-1, "FAIA",-xCableL, ycab-2.*cbpar[1], carpos[2]-sg*1.1, idrotm[0], "ONLY");
+ }
+ }
+ }
+ }
+
+ gMC->Gspos("FCAB", 182, "FAIA", xCable, ycab, -1.1, idrotm[0], "ONLY");
+ gMC->Gspos("FCAB", 181, "FAIA",-xCable, ycab, -1.1, idrotm[0], "ONLY");
+ gMC->Gspos("FCAL", 182, "FAIA", xCableL, ycab-2.*cbpar[1], -1.1, idrotm[0], "ONLY");
+ gMC->Gspos("FCAL", 181, "FAIA",-xCableL, ycab-2.*cbpar[1], -1.1, idrotm[0], "ONLY");
+
+ if (fTOFHoles) {
+ row = 1;
+ for (Int_t sg= -1; sg< 2; sg+= 2) {
+ carpos[2] = sg*zlenA*0.5;
+ for (Int_t nb=0; nb<4; ++nb) {
+ carpos[2] = carpos[2] - sg*(rowgap[nb] - rowstep);
+ nrow = row + rowb[nb];
+ for ( ; row < nrow ; ++row) {
+ carpos[2] -= sg*rowstep;
+ gMC->Gspos("FCAB", 2*row, "FAIB", xCable, ycab, carpos[2]-sg*1.1, idrotm[0], "ONLY");
+ gMC->Gspos("FCAB", 2*row-1, "FAIB",-xCable, ycab, carpos[2]-sg*1.1, idrotm[0], "ONLY");
+ gMC->Gspos("FCAL", 2*row, "FAIB", xCableL, ycab-2.*cbpar[1], carpos[2]-sg*1.1, idrotm[0], "ONLY");
+ gMC->Gspos("FCAL", 2*row-1, "FAIB",-xCableL, ycab-2.*cbpar[1], carpos[2]-sg*1.1, idrotm[0], "ONLY");
+ }
+ }
+ }
}
// Cables and tubes on the side blocks
- const Float_t kcbll = zlenA*0.5; // length of block
- const Float_t kcbllh = zlenA*0.5 - kInterCentrModBorder2; // length of block in case of hole
- const Float_t kcblw = 13.5; // width of block
- const Float_t kcblh1 = 2.; // min. heigth of block
- const Float_t kcblh2 = 12.3; // max. heigth of block
- // volume definition
+ // constants definition
+ const Float_t kCBLl = zlenA*0.5; // length of block
+ const Float_t kCBLlh = zlenA*0.5 - fgkInterCentrModBorder2; // length of block in case of holes
+ //const Float_t fgkCBLw = 13.5; // width of block
+ //const Float_t fgkCBLh1 = 2.; // min. height of block
+ //const Float_t fgkCBLh2 = 12.3; // max. height of block
+ //const Float_t fgkSawThickness = 1.; // Al wall thickness
+
+ // lateral cable and tube volume definition
+ Float_t tgal = (fgkCBLh2 - fgkCBLh1)/(2.*kCBLl);
Float_t cblpar[11];
- tgal = (kcblh2 - kcblh1)/(2.*kcbll);
- cblpar[0] = kcblw *0.5;
+ cblpar[0] = fgkCBLw *0.5;
cblpar[1] = 0.;
cblpar[2] = 0.;
- cblpar[3] = kcbll *0.5;
- cblpar[4] = kcblh1 *0.5;
- cblpar[5] = kcblh2 *0.5;
+ cblpar[3] = kCBLl *0.5;
+ cblpar[4] = fgkCBLh1 *0.5;
+ cblpar[5] = fgkCBLh2 *0.5;
cblpar[6] = TMath::ATan(tgal)*kRaddeg;
- cblpar[7] = kcbll *0.5;
- cblpar[8] = kcblh1 *0.5;
- cblpar[9] = kcblh2 *0.5;
+ cblpar[7] = kCBLl *0.5;
+ cblpar[8] = fgkCBLh1 *0.5;
+ cblpar[9] = fgkCBLh2 *0.5;
cblpar[10]= cblpar[6];
- gMC->Gsvolu("FCBL", "TRAP", idtmed[512], cblpar, 11); // cables & tubes mix
- Float_t sawpar[3] = {0.5, kcblh2*0.5, kcbll};
- gMC->Gsvolu("FSAW", "BOX ", idtmed[505], sawpar, 3); // Side Al walls
- // volume positioning
- AliMatrix(idrotm[7], 90., 90., 180., 0., 90., 180.);
- AliMatrix(idrotm[8], 90., 90., 0., 0., 90., 0.);
- xcoor = (xtof-kcblw)*0.5 - 2.*sawpar[0];
- ycoor = (kcblh1+kcblh2)*0.25 - (ytof*0.5 - kHoneycombLayerThickness)*0.5;
- zcoor = kcbll*0.5;
- gMC->Gspos("FCBL", 1, "FAIA", -xcoor, ycoor, -zcoor, idrotm[7], "ONLY");
- gMC->Gspos("FCBL", 2, "FAIA", xcoor, ycoor, -zcoor, idrotm[7], "ONLY");
- gMC->Gspos("FCBL", 3, "FAIA", -xcoor, ycoor, zcoor, idrotm[8], "ONLY");
- gMC->Gspos("FCBL", 4, "FAIA", xcoor, ycoor, zcoor, idrotm[8], "ONLY");
- xcoor = xtof*0.5-sawpar[0];
- ycoor = (kcblh2 - ytof*0.5 + kHoneycombLayerThickness)*0.5;
- gMC->Gspos("FSAW", 1, "FAIA", -xcoor, ycoor, 0., 0, "ONLY");
- gMC->Gspos("FSAW", 2, "FAIA", xcoor, ycoor, 0., 0, "ONLY");
+ gMC->Gsvolu("FCBL", "TRAP", idtmed[511], cblpar, 11); // cables and tubes mix
+
+ // Side Al Walls definition
+ Float_t sawpar[3] = {fgkSawThickness*0.5, fgkCBLh2*0.5, kCBLl};
+ gMC->Gsvolu("FSAW", "BOX ", idtmed[504], sawpar, 3); // Al
+
+ AliMatrix(idrotm[1], 90., 90., 180., 0., 90., 180.);
+ AliMatrix(idrotm[2], 90., 90., 0., 0., 90., 0.);
+
+ // lateral cable and tube volume positioning
+ Float_t xcoor, ycoor, zcoor;
+ xcoor = (xtof - fgkCBLw)*0.5 - 2.*sawpar[0];
+ ycoor = (fgkCBLh1 + fgkCBLh2)*0.25 - (ytof*0.5 - fgkModuleCoverThickness)*0.5;
+ zcoor = kCBLl*0.5;
+ gMC->Gspos("FCBL", 1, "FAIA", -xcoor, ycoor, -zcoor, idrotm[1], "ONLY");
+ gMC->Gspos("FCBL", 2, "FAIA", xcoor, ycoor, -zcoor, idrotm[1], "ONLY");
+ gMC->Gspos("FCBL", 3, "FAIA", -xcoor, ycoor, zcoor, idrotm[2], "ONLY");
+ gMC->Gspos("FCBL", 4, "FAIA", xcoor, ycoor, zcoor, idrotm[2], "ONLY");
+
if (fTOFHoles) {
- cblpar[3] = kcbllh *0.5;
- cblpar[5] = kcblh1*0.5 + kcbllh*tgal;
- cblpar[7] = kcbllh *0.5;
+ cblpar[3] = kCBLlh *0.5;
+ cblpar[5] = fgkCBLh1*0.5 + kCBLlh*tgal;
+ cblpar[7] = kCBLlh *0.5;
cblpar[9] = cblpar[5];
- gMC->Gsvolu("FCBB", "TRAP", idtmed[512], cblpar, 11); // cables & tubes mix
- xcoor = (xtof - kcblw)*0.5 - 2.*sawpar[0];
- ycoor = (kcblh1 + 2.*cblpar[5])*0.25 - (ytof*0.5 - kHoneycombLayerThickness)*0.5;
- zcoor = kcbll-kcbllh*0.5;
- gMC->Gspos("FCBB", 1, "FAIB", -xcoor, ycoor, -zcoor, idrotm[7], "ONLY");
- gMC->Gspos("FCBB", 2, "FAIB", xcoor, ycoor, -zcoor, idrotm[7], "ONLY");
- gMC->Gspos("FCBB", 3, "FAIB", -xcoor, ycoor, zcoor, idrotm[8], "ONLY");
- gMC->Gspos("FCBB", 4, "FAIB", xcoor, ycoor, zcoor, idrotm[8], "ONLY");
+ gMC->Gsvolu("FCBB", "TRAP", idtmed[511], cblpar, 11); // cables and tubes mix
+
+ xcoor = (xtof - fgkCBLw)*0.5 - 2.*sawpar[0];
+ ycoor = (fgkCBLh1 + 2.*cblpar[5])*0.25 - (ytof*0.5 - fgkModuleCoverThickness)*0.5;
+ zcoor = kCBLl-kCBLlh*0.5;
+ gMC->Gspos("FCBB", 1, "FAIB", -xcoor, ycoor, -zcoor, idrotm[1], "ONLY");
+ gMC->Gspos("FCBB", 2, "FAIB", xcoor, ycoor, -zcoor, idrotm[1], "ONLY");
+ gMC->Gspos("FCBB", 3, "FAIB", -xcoor, ycoor, zcoor, idrotm[2], "ONLY");
+ gMC->Gspos("FCBB", 4, "FAIB", xcoor, ycoor, zcoor, idrotm[2], "ONLY");
+ }
+
+ // lateral cable and tube volume positioning
+ xcoor = xtof*0.5-sawpar[0];
+ ycoor = (fgkCBLh2 - ytof*0.5 + fgkModuleCoverThickness)*0.5;
+ zcoor = 0.;
+ gMC->Gspos("FSAW", 1, "FAIA", -xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FSAW", 2, "FAIA", xcoor, ycoor, zcoor, 0, "ONLY");
+
+ if (fTOFHoles) {
xcoor = xtof*0.5 - sawpar[0];
- ycoor = (kcblh2 - ytof*0.5 + kHoneycombLayerThickness)*0.5;
+ ycoor = (fgkCBLh2 - ytof*0.5 + fgkModuleCoverThickness)*0.5;
gMC->Gspos("FSAW", 1, "FAIB", -xcoor, ycoor, 0., 0, "ONLY");
gMC->Gspos("FSAW", 2, "FAIB", xcoor, ycoor, 0., 0, "ONLY");
}
// TOF Supermodule cover definition and positioning
- Float_t covpar[3] = {xtof*0.5, 0.1, zlenA*0.5};
- gMC->Gsvolu("FCOV", "BOX ", idtmed[505], covpar, 3); // Al cover
+ Float_t covpar[3] = {xtof*0.5, 0.075, zlenA*0.5};
+ gMC->Gsvolu("FCOV", "BOX ", idtmed[504], covpar, 3); // Al
+ if (fTOFHoles) {
+ covpar[2] = (zlenA*0.5 - fgkInterCentrModBorder2)*0.5;
+ gMC->Gsvolu("FCOB", "BOX ", idtmed[504], covpar, 3); // Al
+ covpar[2] = fgkInterCentrModBorder2;
+ gMC->Gsvolu("FCOP", "BOX ", idtmed[513], covpar, 3); // Plastic (CH2)
+ }
+
xcoor = 0.;
- ycoor = 12.5*0.5 - 0.1;
+ ycoor = 12.5*0.5 - covpar[1];
zcoor = 0.;
gMC->Gspos("FCOV", 0, "FAIA", xcoor, ycoor, zcoor, 0, "ONLY");
- if (fTOFHoles) gMC->Gspos("FCOV", 0, "FAIB", xcoor, ycoor, zcoor, 0, "ONLY");
+ if (fTOFHoles) {
+ zcoor = (zlenA*0.5 + fgkInterCentrModBorder2)*0.5;
+ gMC->Gspos("FCOB", 1, "FAIB", xcoor, ycoor, zcoor, 0, "ONLY");
+ gMC->Gspos("FCOB", 2, "FAIB", xcoor, ycoor, -zcoor, 0, "ONLY");
+ zcoor = 0.;
+ gMC->Gspos("FCOP", 0, "FAIB", xcoor, ycoor, zcoor, 0, "ONLY");
+ }
+
+}
+
+//_____________________________________________________________________________
+void AliTOFv6T0::MakeReadoutCrates(Float_t ytof) const
+{
+ // Services Volumes
+
+ // Empty crate weight: 50 Kg, electronics cards + cables ~ 52 Kg.
+ // Per each side (A and C) the total weight is: 2x102 ~ 204 Kg.
+ // ... + weight of the connection pannel for the steel cooling system (Cr 18%, Ni 12%, Fe 70%)
+ // + other remaining elements + various supports
+
+ // Each FEA card weight + all supports
+ // (including all bolts and not including the cable connectors)
+ // 353.1 g.
+ // Per each strip there are 4 FEA cards, then
+ // the total weight of the front-end electonics section is: 353.1 g x 4 = 1412.4 g.
// Services Volumes
// 353.1 g.
// Per each strip there are 4 FEA cards, then
// the total weight of the front-end electonics section is: 353.1 g x 4 = 1412.4 g.
+ //
+
+ Int_t *idtmed = fIdtmed->GetArray()-499;
+
+ Int_t idrotm[18];
+ // volume definition
Float_t serpar[3] = {29.*0.5, 121.*0.5, 90.*0.5};
- gMC->Gsvolu("FTOS", "BOX ", idtmed[515], serpar, 3); // Al + Cu + steel
+ gMC->Gsvolu("FTOS", "BOX ", idtmed[514], serpar, 3); // Al + Cu + steel
+
+ Float_t xcoor, ycoor, zcoor;
zcoor = (118.-90.)*0.5;
Float_t phi = -10., ra = fTOFGeometry->Rmin() + ytof*0.5;
for (Int_t i = 0; i < fTOFGeometry->NSectors(); i++) {
phi += 20.;
xcoor = ra * TMath::Cos(phi * kDegrad);
ycoor = ra * TMath::Sin(phi * kDegrad);
- AliMatrix(idrotm[20+i], 90., phi, 90., phi + 270., 0., 0.);
- gMC->Gspos("FTOS", i, "BFMO", xcoor, ycoor, zcoor, idrotm[20+i], "ONLY");
+ AliMatrix(idrotm[i], 90., phi, 90., phi + 270., 0., 0.);
+ gMC->Gspos("FTOS", i, "BFMO", xcoor, ycoor, zcoor, idrotm[i], "ONLY");
}
+
zcoor = (90. - 223.)*0.5;
gMC->Gspos("FTOS", 1, "BBCE", ra, 0., zcoor, 0, "ONLY");
}
+
//_____________________________________________________________________________
void AliTOFv6T0::DrawModule() const
{
if (fTOFHoles) gMC->Gsatt("FAIB","seen",-1); // all FAIB sub-levels skipped -
// Level 3 of B071, B075 and B074
- gMC->Gsatt("FPEA","seen",1); // all FPEA sub-levels skipped -
- if (fTOFHoles) gMC->Gsatt("FPEB","seen",1); // all FPEB sub-levels skipped -
+ gMC->Gsatt("FPEA","seen",-2/*1*/); // all FPEA sub-levels skipped -
+ if (fTOFHoles) gMC->Gsatt("FPEB","seen",-2/*1*/); // all FPEB sub-levels skipped -
gMC->Gdopt("hide","on");
gMC->Gdopt("shad","on");
gMC->Gsatt("FAIA","SEEN", 0);
if (fTOFHoles) gMC->Gsatt("FAIB","SEEN", 0);
- gMC->Gsatt("FPEA","SEEN", 1);
- if (fTOFHoles) gMC->Gsatt("FPEB","SEEN", 1);
+ gMC->Gsatt("FPEA","SEEN", -2/*1*/);
+ if (fTOFHoles) gMC->Gsatt("FPEB","SEEN", -2/*1*/);
gMC->Gsatt("FSTR","SEEN",-2); // all FSTR sub-levels skipped -
gMC->Gsatt("FWZ2","SEEN", 1);
gMC->Gsatt("FWZ3","SEEN", 1);
gMC->Gsatt("FWZ4","SEEN", 1);
-
+ if (fTOFHoles) {
+ gMC->Gsatt("FWZA","SEEN", 1);
+ gMC->Gsatt("FWZB","SEEN", 1);
+ gMC->Gsatt("FWZC","SEEN", 1);
+ }
// Level 2 of FAIA
// Level 2 of FAIB
gMC->Gsatt("FCA1","SEEN", 0);
gMC->Gsatt("FCA2","SEEN", 0);
gMC->Gsatt("FCAB","SEEN", 0);
+ gMC->Gsatt("FCAL","SEEN", 0);
gMC->Gsatt("FTUB","SEEN",-1); // all FTUB sub-levels skipped -
gMC->Gsatt("FTLN","SEEN", 0);
gMC->Gsatt("FLTN","SEEN", 0);
gMC->Gsatt("FCBL","SEEN", 0);
+ if (fTOFHoles) gMC->Gsatt("FCBB","SEEN", 0);
gMC->Gsatt("FSAW","SEEN", 0);
gMC->Gsatt("FCOV","SEEN", 0);
- if (fTOFHoles) gMC->Gsatt("FCBB","SEEN", 0);
+ if (fTOFHoles) {
+ gMC->Gsatt("FCOB","SEEN", 0);
+ gMC->Gsatt("FCOP","SEEN", 0);
+ }
// Level 2 of FTUB
gMC->Gsatt("FITU","SEEN", 0);
Int_t isxfld = magneticField->Integ();
Float_t sxmgmx = magneticField->Max();
- Float_t we[7], na[7];
-
- //--- Quartz (SiO2) to simulate float glass
- // density tuned to have correct float glass
- // radiation length
- Float_t aq[2] = { 28.09,16. };
+ //--- Quartz (SiO2) ---
+ Float_t aq[2] = { 28.0855,15.9994};
Float_t zq[2] = { 14.,8. };
Float_t wq[2] = { 1.,2. };
- //Float_t dq = 2.55; // std value: 2.2
- Float_t dq = 2.7; // (+5.9%)
+ Float_t dq = 2.7; // (+5.9%)
Int_t nq = -2;
- // --- Nomex
- Float_t anox[4] = {12.01,1.01,16.00,14.01};
+ // --- Nomex (C14H22O2N2) ---
+ Float_t anox[4] = {12.011,1.00794,15.9994,14.00674};
Float_t znox[4] = { 6., 1., 8., 7.};
Float_t wnox[4] = {14., 22., 2., 2.};
//Float_t dnox = 0.048; //old value
Float_t dnox = 0.22; // (x 4.6)
Int_t nnox = -4;
- // --- glass+freon { Si, O, C, F, H, S }
- Float_t agfr[6]= {28.09,16.00,12.01,19.00,1.01,32.065};
- Float_t zgfr[6]= {14., 8., 6., 9., 1., 16.};
- Float_t wgfr[6]= {0.465, 0.530, 0.000484, 0.00383, 4.0e-05, 0.000646};
- Int_t ngfr = 6;
- AliDebug(1,Form("wgfr: %d %d %d %d %d %d", wgfr[0], wgfr[1], wgfr[2], wgfr[3], wgfr[4], wgfr[5]));
- //Float_t dgfr = 1.35; // + FISHLINE (old value)
- Float_t dgfr = 1.6; // + FISHLINE(+18.5 %)
-
- // --- G10 {Si, O, C, H, O}
- Float_t ag10[5] = {28.09,16.00,12.01,1.01,16.00};
+ // --- G10 {Si, O, C, H, O} ---
+ Float_t we[7], na[7];
+
+ Float_t ag10[5] = {28.0855,15.9994,12.011,1.00794,15.9994};
Float_t zg10[5] = {14., 8., 6., 1., 8.};
Float_t wmatg10[5];
Int_t nlmatg10 = 5;
wmatg10[3]= we[3]*0.4;
wmatg10[4]= we[4]*0.4;
AliDebug(1,Form("wg10 %d %d %d %d %d", wmatg10[0], wmatg10[1], wmatg10[2], wmatg10[3], wmatg10[4]));
- // Float_t densg10 = 1.7; //old value
+ //Float_t densg10 = 1.7; //old value
Float_t densg10 = 2.0; // (+17.8%)
- // -- Water
- Float_t awa[2] = { 1., 16. };
+ // --- Water ---
+ Float_t awa[2] = { 1.00794, 15.9994 };
Float_t zwa[2] = { 1., 8. };
Float_t wwa[2] = { 2., 1. };
Float_t dwa = 1.0;
Int_t nwa = -2;
- // AIR
- Float_t aAir[4]={12.0107,14.0067,15.9994,39.948};
+ // --- Air ---
+ Float_t aAir[4]={12.011,14.00674,15.9994,39.948};
Float_t zAir[4]={6.,7.,8.,18.};
Float_t wAir[4]={0.000124,0.755267,0.231781,0.012827};
Float_t dAir = 1.20479E-3;
- // --- fibre glass
- Float_t afg[4] = {28.09,16.00,12.01,1.01};
+ // --- Fibre Glass ---
+ Float_t afg[4] = {28.0855,15.9994,12.011,1.00794};
Float_t zfg[4] = {14., 8., 6., 1.};
Float_t wfg[4] = {0.12906,0.29405,0.51502,0.06187};
//Float_t dfg = 1.111;
- Float_t dfg = 2.; // (+1.8%)
+ Float_t dfg = 2.05; // (x1.845)
Int_t nfg = 4;
- // --- Freon C2F4H2 + SF6
- Float_t afre[4]= {12.01,1.01,19.00,32.07};
- Float_t zfre[4]= { 6., 1., 9., 16.};
- Float_t wfre[4]= {0.21250,0.01787,0.74827,0.021355};
- Float_t densfre= 0.00375;
+ // --- Freon C2F4H2 + SF6 ---
+ Float_t afre[4] = {12.011,1.00794,18.9984032,32.0065};
+ Float_t zfre[4] = { 6., 1., 9., 16.};
+ Float_t wfre[4] = {0.21250,0.01787,0.74827,0.021355};
+ Float_t densfre = 0.00375;
Int_t nfre = 4;
- // --- Al + Cu + G10 {Al, Cu, Si, O, C, H, O}
- Float_t acar[10]= {26.98,
- /*63.55,*/
- ag10[0], ag10[1], ag10[2], ag10[3], ag10[4],
- aAir[0], aAir[1], aAir[2], aAir[3]};
- Float_t zcar[10]= {13.,
- /*29.,*/
- zg10[0], zg10[1], zg10[2], zg10[3], zg10[4],
- zAir[0], zAir[1], zAir[2], zAir[3]};
- Float_t wcar[10];
- wcar[0]= 0.4732;//0.7;
- //wcar[1]= 0.04;//0.05;
- wcar[1]= 0.2854*wmatg10[0];//0.25*wmatg10[0];
- wcar[2]= 0.2854*wmatg10[1];//0.25*wmatg10[1];
- wcar[3]= 0.2854*wmatg10[2];//0.25*wmatg10[2];
- wcar[4]= 0.2854*wmatg10[3];//0.25*wmatg10[3];
- wcar[5]= 0.2854*wmatg10[4];//0.25*wmatg10[4];
- wcar[6]= 0.2414*wAir[0];
- wcar[7]= 0.2414*wAir[1];
- wcar[8]= 0.2414*wAir[2];
- wcar[9]= 0.2414*wAir[3];
-
- AliDebug(1,Form("wcar %f %f %f %f %f %f %f %f %f %f", wcar[0], wcar[1], wcar[2], wcar[3], wcar[4],
- wcar[5], wcar[6], wcar[7], wcar[8], wcar[9]));
- Float_t dcar = 1.85;//1.9;
-
- // --- Cables, tubes {Al, Cu} ---
- Float_t acbt[2]= {26.98,63.55};
- Float_t zcbt[2]= {13., 29.};
- //Float_t wcbt[2]= {0.541,0.459};
- Float_t wcbt[2]= {0.407,0.593};
- //Float_t decbt = 0.95;
- Float_t decbt = 0.68;
-
- // --- Cable {Al, Cu}
- Float_t wcb[2] = {0.165,0.835};
- Float_t decb = 0.962;
-
- // --- Honeycomb layer {Al, Cu}
- Float_t whon[2]= {0.9,0.1};
- //Float_t dhon = 0.44;
- Float_t dhon = 1.095; // (x 2.56)
-
- // --- Crates boxes {Al, Cu, Fe, Cr, Ni}
- Float_t acra[5]= {26.98,63.55,55.845,52.00,58.69};
+ // --- Cables and tubes {Al, Cu} ---
+ Float_t acbt[2] = {26.981539,63.546};
+ Float_t zcbt[2] = {13., 29.};
+ Float_t wcbt[2] = {0.407,0.593};
+ Float_t decbt = 0.68;
+
+ // --- Cable {CH2, Al, Cu} ---
+ Float_t asc[4] = {12.011, 1.00794, 26.981539,63.546};
+ Float_t zsc[4] = { 6., 1., 13., 29.};
+ Float_t wsc[4];
+ for (Int_t ii=0; ii<4; ii++) wsc[ii]=0.;
+
+ Float_t wDummy[4], nDummy[4];
+ for (Int_t ii=0; ii<4; ii++) wDummy[ii]=0.;
+ for (Int_t ii=0; ii<4; ii++) nDummy[ii]=0.;
+ nDummy[0] = 1.;
+ nDummy[1] = 2.;
+ MaterialMixer(wDummy,asc,nDummy,2);
+ wsc[0] = 0.4375*wDummy[0];
+ wsc[1] = 0.4375*wDummy[1];
+ wsc[2] = 0.3244;
+ wsc[3] = 0.2381;
+ Float_t dsc = 1.223;
+
+ // --- Crates boxes {Al, Cu, Fe, Cr, Ni} ---
+ Float_t acra[5]= {26.981539,63.546,55.845,51.9961,58.6934};
Float_t zcra[5]= {13., 29., 26., 24., 28.};
Float_t wcra[5]= {0.7,0.2,0.07,0.018,0.012};
Float_t dcra = 0.77;
+ // --- Polietilene CH2 ---
+ Float_t aPlastic[2] = {12.011, 1.00794};
+ Float_t zPlastic[2] = { 6., 1.};
+ Float_t wPlastic[2] = { 1., 2.};
+ //Float_t dPlastic = 0.92; // PDB value
+ Float_t dPlastic = 0.93; // (~+1.1%)
+ Int_t nwPlastic = -2;
+
AliMixture ( 0, "Air$", aAir, zAir, dAir, 4, wAir);
AliMixture ( 1, "Nomex$", anox, znox, dnox, nnox, wnox);
AliMixture ( 2, "G10$", ag10, zg10, densg10, nlmatg10, wmatg10);
AliMixture ( 3, "fibre glass$", afg, zfg, dfg, nfg, wfg);
- AliMaterial( 4, "Al $", 26.98, 13., 2.7, 8.9, 37.2);
- AliMixture ( 5, "Al+Cu honeycomb$", acbt, zcbt, dhon, 2, whon);
+ AliMaterial( 4, "Al $", 26.981539, 13., 2.7, -8.9, 999.);
+ Float_t factor = 0.4/1.5*2./3.;
+ AliMaterial( 5, "Al honeycomb$", 26.981539, 13., 2.7*factor, -8.9/factor, 999.);
AliMixture ( 6, "Freon$", afre, zfre, densfre, nfre, wfre);
AliMixture ( 7, "Glass$", aq, zq, dq, nq, wq);
- AliMixture ( 8, "glass-freon$", agfr, zgfr, dgfr, ngfr, wgfr);
- AliMixture ( 9, "Water$", awa, zwa, dwa, nwa, wwa);
- AliMixture (10, "Al+Cu$", acbt, zcbt, decbt, 2, wcbt);
- AliMaterial(11, "Cu $", 63.54, 29., 8.96, 1.43, 10.);
- AliMixture (12, "Al+Cu (cable)$", acbt, zcbt, decb, 2, wcb);
- AliMixture (13, "Al+Cu+G10$", acar, zcar, dcar, 10/*7*/, wcar);
- AliMixture (14, "Al+Cu+steel$", acra, zcra, dcra, 5, wcra);
- AliMaterial(15, "Cu_sensitive$", 63.54, 29., 3.392, 1.43, 10.);
+ AliMixture ( 8, "Water$", awa, zwa, dwa, nwa, wwa);
+ AliMixture ( 9, "cables+tubes$", acbt, zcbt, decbt, 2, wcbt);
+ AliMaterial(10, "Cu $", 63.546, 29., 8.96, -1.43, 999.);
+ AliMixture (11, "cable$", asc, zsc, dsc, 4, wsc);
+ AliMixture (12, "Al+Cu+steel$", acra, zcra, dcra, 5, wcra);
+ AliMixture (13, "plastic$", aPlastic, zPlastic, dPlastic, nwPlastic, wPlastic);
+ Float_t factorHoles = 1./36.5;
+ AliMaterial(14, "Al honey for holes$", 26.981539, 13., 2.7*factorHoles, -8.9/factorHoles, 999.);
Float_t epsil, stmin, deemax, stemax;
deemax = -.3; // Maximum fractional energy loss, DLS
stmin = -.8;
- AliMedium( 1, "Air$", 0, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin);
+ AliMedium( 1,"Air$", 0, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin);
AliMedium( 2,"Nomex$", 1, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin);
AliMedium( 3,"G10$", 2, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin);
AliMedium( 4,"fibre glass$", 3, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin);
- AliMedium( 5,"glass-freon$", 8, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin);
- AliMedium( 6,"Al Frame$", 4, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin);
- AliMedium( 7,"honeycomb$", 5, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin);
- AliMedium( 8,"Fre$", 6, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin);
- AliMedium( 9,"Cu-S$", 15, 1, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin);
- AliMedium(10,"Glass$", 7, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin);
- AliMedium(11,"Water$", 9, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin);
- AliMedium(12,"Cable$", 12, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin);
- AliMedium(13,"Al+Cables$", 10, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin);
- AliMedium(14,"Copper$", 11, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin);
- AliMedium(15,"Cards$", 13, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin);
- AliMedium(16,"Crates$", 14, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin);
+ AliMedium( 5,"Al Frame$", 4, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin);
+ AliMedium( 6,"honeycomb$", 5, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin);
+ AliMedium( 7,"Fre$", 6, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin);
+ AliMedium( 8,"Cu-S$", 10, 1, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin);
+ AliMedium( 9,"Glass$", 7, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin);
+ AliMedium(10,"Water$", 8, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin);
+ AliMedium(11,"Cable$", 11, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin);
+ AliMedium(12,"Cables+Tubes$", 9, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin);
+ AliMedium(13,"Copper$", 10, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin);
+ AliMedium(14,"Plastic$", 13, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin);
+ AliMedium(15,"Crates$", 12, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin);
+ AliMedium(16,"honey_holes$", 14, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin);
}
//_____________________________________________________________________________
if(
gMC->IsTrackEntering()
&& gMC->TrackCharge()
- //&& gMC->GetMedium()==idtmed[508]
- && gMC->CurrentMedium()==idtmed[508]
+ //&& gMC->GetMedium()==idtmed[507]
+ && gMC->CurrentMedium()==idtmed[507]
&& gMC->CurrentVolID(copy)==fIdSens
)
{
AliMC *mcApplication = (AliMC*)gAlice->GetMCApp();
- AddTrackReference(mcApplication->GetCurrentTrackNumber(), AliTrackReference::kTOF);
- //AddTrackReference(gAlice->GetMCApp()->GetCurrentTrackNumber());
+ //AddTrackReference(mcApplication->GetCurrentTrackNumber(), AliTrackReference::kTOF);
+ AddTrackReference(mcApplication->GetCurrentTrackNumber());
// getting information about hit volumes
git://git.uio.no / u / mrichter / AliRoot.git / commitdiff