which included commits to RCS files with non-trunk default branches.
--- /dev/null
+
+#ifndef ROOT_HCommon
+#define ROOT_HCommon
+
+#ifndef __CFORTRAN_LOADED
+//*KEEP,cfortran.
+#include "cfortran.h"
+//*KEND.
+#endif
+
+extern "C" {
+
+/*=========================================================*/
+/* COMMON/HIPARNT/HIPR1(100),IHPR2(50),HINT1(100),IHNT2(50)*/
+/*---------------------------------------------------------*/
+typedef struct {
+ Float_t hipr1[100];
+ Int_t ihpr2[50];
+ Float_t hint1[100];
+ Int_t ihnt2[50];
+} HiparntCommon;
+
+#define HIPARNT COMMON_BLOCK(HIPARNT,hiparnt)
+COMMON_BLOCK_DEF(HiparntCommon,HIPARNT);
+
+/**************************************************************************/
+/* D E S C R I P T I O N : */
+/*------------------------------------------------------------------------*/
+/*COMMON/HIPARNT/HIPR1(100), IHPR2(50), HINT1(100), IHNT2(50) */
+/*Purpose: contains input parameters (HIPR1, IHPR2) for event options */
+/* and some extra information (HINT1, IHNT2) of current event. */
+/*HIPR1(1): (D=1.5 GeV/$c^2$) minimum value for the invariant mass of */
+/* the excited string system in a hadron-hadron interaction. */
+/*HIPR1(2): (D=0.35 GeV) width of the Gaussian $P_T$ distribution of */
+/* produced hadron in Lund string fragmentation */
+/* (PARJ(21) in JETSET 7.2). */
+/*HIPR1(3), HIPR1(4): (D=0.5, 0.9 GeV$^{-2}$) give the $a$ and $b$ */
+/* parameters of the symmetric Lund fragmentation function */
+/* (PARJ(41), PARJ(42) in JETSET 7.2). */
+/*HIPR1(5): (D=2.0 GeV/$c^2$) invariant mass cut-off for the dipole */
+/* radiation of a string system below which soft gluon */
+/* radiations are terminated. */
+/*HIPR1(6): (D=0.1) the depth of shadowing of structure functions */
+/* at $x=0$:$\alpha_A=\mbox{HIPR1(6)}\times(A^{1/3}-1)$. */
+/*HIPR1(7): not used */
+/*HIPR1(8): (D=2.0 GeV/$c$) minimum $P_T$ transfer in hard or */
+/* semihard scatterings. */
+/*HIPR1(9): (D=$-1.0$ GeV/$c$) maximum $P_T$ transfer in hard or */
+/* semihard scatterings. If negative, the limit is set */
+/* by the colliding energy. */
+/*HIPR1(10): (D=$-2.25$ GeV/$c$) specifies the value of $P_T$ for */
+/* each triggered hard scattering generated per event */
+/* (see Section \ref{sec:jet2}). If HIPR1(10) is negative, */
+/* its absolute value gives the low limit of the */
+/* $P_T$ of the triggered jets. */
+/*HIPR1(11): (D=2.0 GeV/$c$) minimum $P_T$ of a jet which will interact */
+/* with excited nuclear matter. When the $P_T$ of a jet */
+/* is smaller than HIPR1(11) it will stop interacting further. */
+/*HIPR1(12): (D=1.0 fm) transverse distance between a traversing jet */
+/* and an excited nucleon (string system) below which they */
+/* will interact and the jet will lose energy and momentum */
+/* to that string system. */
+/*HIPR1(13): (D=1.0 fm) the mean free path of a jet when it goes */
+/* through the excited nuclear matter. */
+/*HIPR1(14): (D=2.0 GeV/fm) the energy loss $dE/dz$ of a gluon */
+/* jet inside the excited nuclear matter. The energy loss */
+/* for a quark jet is half of the energy loss of a gluon. */
+/*HIPR1(15): (D=0.2 GeV/$c$) the scale $\Lambda$ in the */
+/* calculation of $\alpha_s$. */
+/*HIPR1(16): (D=2.0 GeV/$c$) the initial scale $Q_0$ for the */
+/* evolution of the structure functions. */
+/*HIPR1(17): (D=2.0) $K$ factor for the differential jet cross */
+/* sections in the lowest order pQCD calculation. */
+/*HIPR1(18): not used */
+/*HIPR1(19), HIPR1(20): (D=0.1, 1.4 GeV/$c$) parameters in the */
+/* distribution for the $P_T$ kick from soft interactions , */
+/* $1/[(\mbox{HIPR1(19)}^2+P_T^2)(\mbox{HIPR1(20)}^2+P_T^2)]$. */
+/*HIPR1(21): (D=1.6 GeV/$c$) the maximum $P_T$ for soft interactions, */
+/* beyond which a Gaussian distribution as specified by */
+/* HIPR1(2) will be used. */
+/*HIPR1(22): (D=2.0 GeV/$c$) the scale in the form factor to suppress */
+/* the $P_T$ transfer to diquarks in hard scatterings, */
+/*HIPR1(23)--HIPR1(28): not used. */
+/*HIPR1(29): (D=0.4 fm) the minimum distance between two nucleons */
+/* inside a nucleus when the coordinates of the nucleons */
+/* inside a nucleus are initialized. */
+/*HIPR1(30): (D=2$\times$HIPR1(31)=57.0 mb) the inclusive cross */
+/* section $\sigma_{soft}$ for soft interactions. The default */
+/* value $\sigma_{soft}=2\sigma_0$ is used to ensure the */
+/* geometrical scaling of $pp$ interaction cross sections */
+/* at low energies. */
+/*HIPR1(31): (D=28.5 mb) the cross section $\sigma_0$ which */
+/* characterizes the geometrical size of a nucleon */
+/* ($\pi b_0^2=\sigma_0$, see Eq.~\ref{eq:over2}). */
+/* The default value is only for high-energy */
+/* limit ($\sqrt{s}>200$ GeV). At lower energies, a slight */
+/* decrease which depends on energy is parametrized in the */
+/* program. The default values of the two parameters */
+/* HIPR1(30), HIPR1(31) are only for $NN$ type interactions. */
+/* For other kinds of projectile or target hadrons, users */
+/* should change these values so that correct inelastic */
+/* and total cross sections (HINT1(12), HINT1(13)) are */
+/* obtained by the program. */
+/*HIPR1(32): (D=3.90) parameter $\mu_0$ in Eq.~\ref{eq:over2} for */
+/* the scaled eikonal function. */
+/*HIPR1(33): fractional cross section of single-diffractive */
+/* interaction as parametrized in Ref.~\cite{goulianos}. */
+/*HIPR1(34): maximum radial coordinate for projectile nucleons */
+/* to be given by the initialization program HIJSET. */
+/*HIPR1(35): maximum radial coordinate for target nucleons */
+/* to be given by the initialization program HIJSET. */
+/*HIPR1(36)-HIPR1(39): not used. */
+/*HIPR1(40): (D=3.141592654) value of $\pi$. */
+/*HIPR1(41)--HIPR1(42): not used. */
+/*HIPR1(43): (D=0.01) fractional energy error relative to the */
+/* colliding energy permitted per nucleon-nucleon collision. */
+/*HIPR1(44), HIPR1(45), HIPR1(46): (D=1.5, 0.1 GeV, 0.25) parameters */
+/* $\alpha$, $c$ and $\beta$ in the valence quark */
+/* distributions for soft string excitation, */
+/* $(1-x)^{\alpha}/(x^2+c^2/s)^{\beta}$ for baryons, */
+/* $1/{(x^2+c^2/s)[(1-x)^2+c^2/s)]}^{\beta}$ for mesons. */
+/*HIPR1(47), HIPR1(48): (D=0.0, 0.5) parameters $\alpha$ and $\beta$ */
+/* in valence quark distribution, */
+/* $(1-x)^{\alpha}/(x^2+c^2/s)^{\beta}$, for the */
+/* disassociated excitation in a single diffractive collision. */
+/*HIPR1(49)--HIPR1(100): not used. */
+/*IHPR2(1): (D=1) switch for dipole-approximated QCD radiation */
+/* of the string system in soft interactions. */
+/*IHPR2(2): (D=3) option for initial and final state radiation in */
+/* the hard scattering. */
+/* =0: both initial and final radiation are off. */
+/* =1: initial radiation on and final radiation off. */
+/* =2: initial radiation off and final radiation on. */
+/* =3: both initial and final radiation are on. */
+/*IHPR2(3): (D=0) switch for triggered hard scattering with specified */
+/* $P_T\geq$HIPR1(10). */
+/* =0: no triggered jet production. */
+/* =1: ordinary hard processes. */
+/* =2: only direct photon production. */
+/*IHPR2(4): (D=1) switch for jet quenching in the excited */
+/* nuclear matter. */
+/*IHPR2(5): (D=1) switch for the $P_T$ kick due to soft interactions. */
+/*IHPR2(6): (D=1) switch for the nuclear effect on the parton */
+/* distribution function such as shadowing. */
+/*IHPR2(7): (D=1) selection of Duke-Owens set (1 or 2) of parametrization */
+/* of nucleon structure functions. */
+/*IHPR2(8): (D=10) maximum number of hard scatterings per */
+/* nucleon-nucleon interaction. When IHPR2(8)=0, jet */
+/* production will be turned off. When IHPR2(8)$<0$, the */
+/* number of jet production will be fixed at its absolute */
+/* value for each NN collision. */
+/*IHPR2(9): (D=0) switch to guarantee at least one pair of minijets */
+/* production per event ($pp$, $pA$ or $AB$). */
+/*IHPR2(10): (D=0) option to print warning messages about errors that */
+/* might happen. When a fatal error happens the current event */
+/* will be abandoned and a new one is generated. */
+/*IHPR2(11): (D=1) choice of baryon production model. */
+/* =0: no baryon-antibaryon pair production, initial */
+/* diquark treated as a unit. */
+/* =1: diquark-antidiquark pair production allowed, */
+/* initial diquark treated as a unit. */
+/* =2: diquark-antidiquark pair production allowed, */
+/* with the possibility for diquark to split */
+/* according to the ``popcorn'' scheme (see the */
+/* documentation of JETSET 7.2). */
+/*IHPR2(12): (D=1) option to turn off the automatic decay of the */
+/* following particles: */
+/* $\pi^0$, $K^0_S$, $D^{\pm}$, $\Lambda$, $\Sigma^{\pm}$. */
+/*IHPR2(13): (D=1) option to turn on single diffractive reactions. */
+/*IHPR2(14): (D=1) option to turn on elastic scattering. */
+/*IHPR2(15)--IHPR2(18): not used. */
+/*IHPR2(19): (D=1) option to turn on initial state soft interaction. */
+/*IHPR2(20): (D=1) switch for the final fragmentation. */
+/*IHPR2(21): (D=0) option to keep the information of all particles */
+/* including those which have decayed and the decay history */
+/* in the common block HIMAIN2. The line number of the parent */
+/* particle is KATT(I,3). The status of a partcile, */
+/* whether it is a finally produced particle (KATT(I,4)=1) */
+/* or a decayed particle (KATT(I,4)=11) is also kept. */
+/*IHPR2(22)-IHPR2(50): not used. */
+/*HINT1(1): (GeV) colliding energy in the c.m. frame of nucleon-nucleon */
+/* collisions. */
+/*HINT1(2): Lorentz transformation variable $\beta$ from laboratory */
+/* to c.m. frame of nucleon nucleon collisions. */
+/*HINT1(3): rapidity $y_{cm}$ of the c.m. frame */
+/* $\beta=\tanh y_{cm}$. */
+/*HINT1(4): rapidity of projectile nucleons (hadron) $y_{proj}$. */
+/*HINT1(5): rapidity of target nucleons (hadron) $y_{targ}$. */
+/*HINT1(6): (GeV) energy of the projectile nucleons (hadron) in the */
+/* given frame. */
+/*HINT1(7): (GeV) energy of the target nucleons (hadron) in the */
+/* given frame. */
+/*HINT1(8): (GeV) the rest mass of projectile particles. */
+/*HINT1(9): (GeV) the rest mass of target particles. */
+/*HINT1(10): (mb) the averaged cross section for jet production */
+/* per nucleon-nucleon collisions, */
+/* $\int d^2b\{1-\exp[-\sigma_{jet}T_N(b)]\}$. */
+/*HINT1(11): (mb) the averaged inclusive cross section $\sigma_{jet}$ */
+/* for jet production per nucleon-nucleon collisions. */
+/*HINT1(12): (mb) the averaged inelastic cross section of */
+/* nucleon-nucleon collisions. */
+/*HINT1(13): (mb) the averaged total cross section of nucleon-nucleon */
+/* collisions. */
+/*HINT1(14): (mb) the jet production cross section without nuclear */
+/* shadowing effect $\sigma_{jet}^0$ (see Eq.~\ref{eq:sjetab}). */
+/*HINT1(15): (mb) the cross section $\sigma_{jet}^A$ to account for */
+/* the projectile shadowing correction term in the jet cross */
+/* section (see Eq.~\ref{eq:sjetab}). */
+/*HINT1(16): (mb) the cross section $\sigma_{jet}^B$ to account for */
+/* the target shadowing correction term in the jet cross */
+/* section (see Eq.~\ref{eq:sjetab}). */
+/*HINT1(17): (mb) the cross section $\sigma_{jet}^{AB}$ to account */
+/* for the cross term of shadowing correction in the jet */
+/* cross section. */
+/*HINT1(18): (mb) the effective cross section */
+/* $\sigma_{jet}^{eff}(r_A,r_B)$ for jet production */
+/* of the latest nucleon-nucleon collision which depends */
+/* on the transverse coordinates of the colliding */
+/* nucleons. */
+/*HINT1(19): (fm) the (absolute value of) impact parameter of the */
+/* latest event. */
+/*HINT1(20): (radians) the azimuthal angle $\phi$ of the impact */
+/* parameter vector in the transverse plane of the latest */
+/* event. */
+/*HINT1(21)--HINT1(25): the four momentum and mass ($p_x,p_y,p_z,E,M$) */
+/* (GeV/$c$, GeV, GeV/$c^2$) of the first scattered parton */
+/* in the triggered hard scattering. This is before the final */
+/* state radiation but after the initial state radiation. */
+/*HINT1(26)--HINT1(30): not used. */
+/*HINT1(31)--HINT1(35): the four momentum and mass ($p_x,p_y,p_z,E,M$) */
+/* (GeV/$c$, GeV, GeV/$c^2$) of the second scattered parton */
+/* in the triggered hard scattering. This is before the final */
+/* state radiation but after the initial state radiation. */
+/*HINT1(46)--HINT1(40): not used. */
+/*HINT1(41)--HINT1(45): the four momentum and mass ($p_x,p_y,p_z,E,M$) */
+/* (GeV/$c$, GeV, GeV/$c^2$) of the first scattered parton */
+/* in the latest hard scattering of the latest event. */
+/*HINT1(46): $P_T$ (GeV/$c$) of the first scattered parton in the */
+/* latest hard scattering of the latest event. */
+/*HINT1(47)--HINT1(50): not used. */
+/*HINT1(51)--HINT1(55): the four momentum and mass ($p_x,p_y,p_z,E,M$) */
+/* (GeV/$c$, GeV, GeV/$c^2$) of the second scattered parton */
+/* in the latest hard scattering of the latest event. */
+/*HINT1(56): $P_T$ (GeV/$c$) of the second scattered parton in the */
+/* latest hard scattering of the latest event. */
+/*HINT1(57)--HINT1(58): not used. */
+/*HINT1(59): (mb) the averaged cross section of the */
+/* triggered jet production (with $P_T$ specified by HIPR1(10) */
+/* and with switch by IHPR2(3)) per nucleon-nucleon */
+/* collision, */
+/* $\int d^2b\{1-\exp[-\sigma_{jet}^{trig}T_N(b)]\}$ */
+/*HINT1(60): (mb) the averaged inclusive cross section of the */
+/* triggered jet production $\sigma_{jet}^{trig}$ */
+/* (with $P_T$ specified by */
+/* HIPR1(10) and with switch by IHPR2(3)) per */
+/* nucleon-nucleon collision. */
+/*HINT1(61): (mb) the triggered jet production cross section without */
+/* nuclear shadowing effect (similar to HINT1(14)). */
+/*HINT1(62): (mb) the cross section to account for the projectile */
+/* shadowing correction term in the triggered jet cross */
+/* section (similar to HINT1(15)). */
+/*HINT1(63): (mb) the cross section to account for the target */
+/* shadowing correction term in the triggered jet cross */
+/* section (similar to HINT1(16)). */
+/*HINT1(64): (mb) the cross section to account for the cross */
+/* term of shadowing correction in the triggered jet */
+/* cross section (similar to HINT1(17). */
+/*HINT1(65): (mb) the inclusive cross section for latest triggered */
+/* jet production which depends on the transverse coordinates */
+/* of the colliding nucleons (similar to HINT1(18)). */
+/*HINT1(67)--HINT1(71): not used. */
+/*HINT1(72)--HINT1(75): three parameters for the Wood-Saxon */
+/* projectile nuclear distribution and the normalization */
+/* read from a table inside the program, */
+/* $\rho(r)=C[1+W(r/R_A)^2]/\{1+\exp[(r-R_A)/D]\}$, */
+/* $R_A$=HINT1(72), $D$=HINT1(73), $W$=HINT1(74), $C$=HINT1(75). */
+/*HINT1(76)--HINT1(79): three parameters for the Wood-Saxon */
+/* projectile nuclear distribution and the normalization */
+/* read from a table inside the program, */
+/* $\rho(r)=C[1+W(r/R_A)^2]/\{1+\exp[(r-R_A)/D]\}$, */
+/* $R_A$=HINT1(76), $D$=HINT1(77), $W$=HINT1(78), $C$=HINT1(79). */
+/*HINT1(80)--HINT1(100): the probability of $j=0-20$ number of hard */
+/* scatterings per nucleon-nucleon collisions. */
+/*IHNT2(1): the mass number of the projectile nucleus (1 for a hadron). */
+/*IHNT2(2): the charge number of the projectile nucleus. If the */
+/* projectile is a hadron, it gives the charge of the hadron. */
+/*IHNT2(3): the mass number of the target nucleus (1 for a hadron). */
+/*IHNT2(4): the charge number of the target nucleus. If the target */
+/* is a hadron, it gives the charge of the hadron. */
+/*IHNT2(5): the flavor code of the projectile hadron (0 for nucleus). */
+/*IHNT2(6): the flavor code of the target hadron (0 for nucleus). */
+/*IHNT2(7)--IHNT2(8): not used. */
+/*IHNT2(9): the flavor code of the first scattered parton in the */
+/* triggered hard scattering. */
+/*IHNT2(10): the flavor code of the second scattered parton in the */
+/* triggered hard scattering. */
+/*IHNT2(11): the sequence number of the projectile nucleon in the */
+/* latest nucleon-nucleon interaction of the latest event. */
+/*IHNT2(12): the sequence number of the target nucleon in the latest */
+/* nucleon-nucleon interaction of the latest event. */
+/*IHNT2(13): status of the latest soft string excitation. */
+/* =1: double diffractive. */
+/* =2: single diffractive. */
+/* =3: non-single diffractive. */
+/*IHNT2(14): the flavor code of the first scattered parton in the */
+/* latest hard scattering of the latest event. */
+/*IHNT2(15): the flavor code of the second scattered parton in the */
+/* latest hard scattering of the latest event. */
+/*IHNT2(16)--IHNT2(50): not used. */
+/*========================================================================*/
+
+/*========================================================================*/
+/* COMMON/HIMAIN1/ NATT,EATT,JATT,NT,NP,N0,N01,N10,N11,BB */
+/*------------------------------------------------------------------------*/
+typedef struct {
+ Int_t natt;
+ Float_t eatt;
+ Int_t jatt;
+ Int_t nt;
+ Int_t np;
+ Int_t n0;
+ Int_t n01;
+ Int_t n10;
+ Int_t n11;
+ Float_t bb;
+ } Himain1Common;
+
+#define HIMAIN1 COMMON_BLOCK(HIMAIN1,himain1)
+COMMON_BLOCK_DEF(Himain1Common,HIMAIN1);
+/*************************************************************************/
+/* D E S C R I P T I O N : */
+/*-----------------------------------------------------------------------*/
+/*COMMON/HIMAIN1/NATT, EATT, JATT, NT, NP, N0, N01, N10, N11 */
+/*Purpose: to give the overall information of the generated event. */
+/*NATT: total number of produced stable and undecayed particles of */
+/* the current event. */
+/*EATT: the total energy of the produced particles in c.m. frame */
+/* of the collision to check energy conservation. */
+/*JATT: the total number of hard scatterings in the current event. */
+/*NP, NT: the number of participant projectile and target nucleons */
+/* in the current event. */
+/*N0, N01, N10, N11: number of $N$-$N$, $N$-$N_{wounded}$, */
+/* $N_{wounded}$-$N$, and */
+/* $N_{wounded}$-$N_{wounded}$ collisions in */
+/* the current event ($N$, $N_{wounded}$ stand */
+/* for nucleon and wounded nucleon respectively). */
+/*=======================================================================*/
+
+
+/*========================================================*/
+/* COMMON/HIMAIN2/KATT(130000,4),PATT(130000,4) */
+/*--------------------------------------------------------*/
+typedef struct {
+ Int_t katt[4][130000];
+ Float_t patt[4][130000];
+} Himain2Common;
+
+#define HIMAIN2 COMMON_BLOCK(HIMAIN2,himain2)
+COMMON_BLOCK_DEF(Himain2Common,HIMAIN2);
+/*************************************************************************/
+/* D E S C R I P T I O N : */
+/*-----------------------------------------------------------------------*/
+/*Purpose: to give information of produced stable and undecayed */
+/* particles. Parent particles which decayed are not included */
+/* here. */
+/*KATT(I, 1): (I=1,$\cdots$,NATT) flavor codes (see appendix) of */
+/* the produced particles. */
+/*KATT(I, 2): (I=1,$\cdots$,NATT) status codes to identify the */
+/* sources from which the particles come. */
+/* =0: projectile nucleon (or hadron) which has */
+/* not interacted at all. */
+/* =1: projectile nucleon (or hadron) which */
+/* only suffers an elastic collision. */
+/* =2: from a diffractive projectile nucleon (or hadron) */
+/* in a single diffractive interaction. */
+/* =3: from the fragmentation of a projectile string */
+/* system (including gluon jets). */
+/* =10 target nucleon (or hadron) which has not */
+/* interacted at all. */
+/* =11: target nucleon (or hadron) which only */
+/* suffers an elastic collision. */
+/* =12: from a diffractive target nucleon (or hadron) */
+/* in a single diffractive interaction. */
+/* =13: from the fragmentation of a target string */
+/* system (including gluon jets). */
+/* =20: from scattered partons which form string */
+/* systems themselves. */
+/* =40: from direct production in the hard processes */
+/* ( currently, only direct photons are included). */
+/*KATT(I,3): (I=1,$\cdots$,NATT) line number of the parent particle. */
+/* For finally produced or directly produced (not from */
+/* the decay of another particle) particles, it is set */
+/* to 0 (The option to keep the information of all */
+/* particles including the decayed ones is IHPR2(21)=1). */
+/*KATT(I,4): (I=1,$\cdots$,NATT) status number of the particle. */
+/* =1: finally or directly produced particles. */
+/* =11: particles which has already decayed. */
+/*PATT(I, 1-4): (I=1,$\cdots$,NATT) four-momentum ($p_x,p_y,p_z,E$) */
+/* (GeV/$c$, GeV) of the produced particles. */
+/* */
+/*=======================================================================*/
+
+/*=======================================================================*/
+/* COMMON/HIJJET1/NPJ(300),KFPJ(300,500),PJPX(300,500),PJPY(300,500) */
+/* & ,PJPZ(300,500),PJPE(300,500),PJPM(300,500) */
+/* & ,NTJ(300),KFTJ(300,500),PJTX(300,500),PJTY(300,500) */
+/* & ,PJTZ(300,500),PJTE(300,500),PJTM(300,500) */
+/*-----------------------------------------------------------------------*/
+typedef struct {
+ Int_t npj[300];
+ Int_t kfpj[500][300];
+ Float_t pjpx[500][300];
+ Float_t pjpy[500][300];
+ Float_t pjpz[500][300];
+ Float_t pjpe[500][300];
+ Float_t pjpm[500][300];
+ Int_t ntj[300];
+ Int_t kftj[500][300];
+ Float_t pjtx[500][300];
+ Float_t pjty[500][300];
+ Float_t pjtz[500][300];
+ Float_t pjte[500][300];
+ Float_t pjtm[500][300];
+} Hijjet1Common;
+
+#define HIJJET1 COMMON_BLOCK(HIJJET1,hijjet1)
+COMMON_BLOCK_DEF(Hijjet1Common,HIJJET1);
+/*************************************************************************/
+/* D E S C R I P T I O N : */
+/*-----------------------------------------------------------------------*/
+/*Purpose: contains information about produced partons which are */
+/* connected with the valence quarks and diquarks of */
+/* projectile or target nucleons (or hadron) to form */
+/* string systems for fragmentation. The momentum and */
+/* energy of all produced partons are calculated in */
+/* the c.m. frame of the collision. IAP, IAT are the */
+/* numbers of nucleons in projectile and target nucleus */
+/* respectively (IAP, IAT=1 for hadron projectile or target). */
+/*NPJ(I): (I=1,$\cdots$,IAP) number of partons associated with projectile*/
+/* nucleon I. */
+/*KFPJ(I, J): (I=1,$\cdots$,IAP, J=1,$\cdots$,NPJ(I)) parton */
+/* flavor code of the */
+/* parton J associated with projectile nucleon I. */
+/*PJPX(I, J), PJPY(I, J), PJPZ(I, J), PJPE(I, J), PJPM(I, J): the four */
+/* momentum and mass ($p_x,p_y,p_z,E,M$) */
+/* (GeV/$c$, GeV, GeV/$c^2$) of parton J associated with */
+/* the projectile nucleon I. */
+/*NTJ(I): (I=1,$\cdots$,IAT) number of partons associated with */
+/* target nucleon I. */
+/*KFTJ(I, J): (I=1,$\cdots$,IAT, J=1,$\cdots$,NTJ(I)): parton */
+/* flavor code of the parton J associated with */
+/* target nucleon I. */
+/*PJTX(I, J), PJTY(I, J), PJTZ(I, J), PJTE(I, J), PJTM(I, J): the four */
+/* momentum and mass ($p_x,p_y,p_z,E,M$) */
+/* (GeV/$c$, GeV, GeV/$c^2$) of parton J associated with */
+/* target nucleon I. */
+/* */
+/*=======================================================================*/
+
+/*=======================================================================*/
+/* COMMON/HIJJET2/NSG,NJSG(900),IASG(900,3),K1SG(900,100), */
+/* & K2SG(900,100),PXSG(900,100),PYSG(900,100), */
+/* & PZSG(900,100),PESG(900,100),PMSG(900,100) */
+/*-----------------------------------------------------------------------*/
+typedef struct {
+ Int_t nsg;
+ Int_t njsg[900];
+ Int_t iasg[3][900];
+ Int_t k1sg[100][900];
+ Int_t k2sg[100][900];
+ Float_t pxsg[100][900];
+ Float_t pysg[100][900];
+ Float_t pzsg[100][900];
+ Float_t pesg[100][900];
+ Float_t pmsg[100][900];
+} Hijjet2Common;
+
+#define HIJJET2 COMMON_BLOCK(HIJJET2,hijjet2)
+COMMON_BLOCK_DEF(Hijjet2Common,HIJJET2);
+/*************************************************************************/
+/* D E S C R I P T I O N : */
+/*-----------------------------------------------------------------------*/
+/*Purpose: contains information about the produced partons which */
+/* will form string systems themselves without being */
+/* connected to valence quarks and diquarks. */
+/*NSG: the total number of such string systems. */
+/*NJSG(I): (I=1,$\cdots$,NSG) number of partons in the string system I. */
+/*IASG(I, 1), IASG(I, 2): to specify which projectile and target */
+/* nucleons produce string system I. */
+/*IASG(I, 3): to indicate whether the jets will be quenched (0) */
+/* or will not be quenched (1). */
+/*K1SG(I, J): (J=1,$\cdots$,NJSG(I)) color flow information of parton J */
+/* in string system I (see JETSET 7.2 for detailed */
+/* explanation). */
+/*K2SG(I, J): (J=1,$\cdots$,NJSG(I)) flavor code of parton J in string */
+/* system I. */
+/*PXSG(I, J), PYSG(I, J), PZSG(I, J), PESG(I, J), PMSG(I, J): four */
+/* momentum and mass ($p_x,p_y,p_z,E,M$) */
+/* ( GeV/$c$, GeV, GeV/$c^2$) of parton J in string system I. */
+/*=======================================================================*/
+
+/*=======================================================================*/
+/* COMMON/HISTRNG/NFP(300,15),PP(300,15),NFT(300,15),PT(300,15) */
+/*-----------------------------------------------------------------------*/
+typedef struct {
+ Int_t nfp[15][300];
+ Float_t pp[15][300];
+ Int_t nft[15][300];
+ Float_t pt[15][300];
+} HistrngCommon;
+
+#define HISTRNG COMMON_BLOCK(HISTRNG,histrng)
+COMMON_BLOCK_DEF(HistrngCommon,HISTRNG);
+/*************************************************************************/
+/* D E S C R I P T I O N : */
+/*-----------------------------------------------------------------------*/
+/*Purpose: contains information about the projectile and */
+/* target nucleons (hadron) and the corresponding constituent */
+/* quarks, diquarks. IAP, IAT are the numbers of nucleons in */
+/* projectile and target nucleus respectively (IAP, IAT=1 */
+/* for hadron projectile or target). */
+/*NFP(I, 1): (I=1,$\cdots$,IAP) flavor code of the valence quark in */
+/* projectile nucleon (hadron) I. */
+/*NFP(I, 2): flavor code of diquark in projectile nucleon (anti-quark */
+/* in projectile meson) I. */
+/*NFP(I, 3): present flavor code of the projectile nucleon (hadron) I */
+/* ( a nucleon or meson can be excited to its vector resonance). */
+/*NFP(I, 4): original flavor code of projectile nucleon (hadron) I. */
+/*NFP(I, 5): collision status of projectile nucleon (hadron) I. */
+/* =0: suffered no collision. */
+/* =1: suffered an elastic collision. */
+/* =2: being the diffractive one in a single-diffractive */
+/* collision. */
+/* =3: became an excited string after an inelastic */
+/* collision. */
+/*NFP(I, 6): the total number of hard scatterings associated with */
+/* projectile nucleon (hadron) I. If NFP(I,6)$<0$, it can not */
+/* produce jets any more due to energy conservation. */
+/*NFP(I, 10): to indicate whether the valence quarks or diquarks */
+/* (anti-quarks) in projectile nucleon (hadron) I */
+/* suffered a hard scattering, */
+/* =0: has not suffered a hard scattering. */
+/* =1: suffered one or more hard scatterings in */
+/* current binary nucleon-nucleon collision. */
+/* =-1: suffered one or more hard scatterings in */
+/* previous binary nucleon-nucleon collisions. */
+/*NFP(I, 11): total number of interactions projectile nucleon (hadron) */
+/* I has suffered so far. */
+/*PP(I, 1), PP(I, 2), PP(I, 3), PP(I, 4), PP(I, 5): four momentum and */
+/* the invariant mass ($p_x,p_y,p_z,E,M$) */
+/* (GeV/$c$, GeV, GeV/$c^2$) of projectile nucleon (hadron) I. */
+/*PP(I, 6), PP(I, 7): transverse momentum ($p_x,p_y$) (GeV/$c$) of the */
+/* valence quark in projectile nucleon (hadron) I. */
+/*PP(I, 8), PP(I, 9): transverse momentum ($p_x,p_y$) (GeV/$c$) of the */
+/* diquark (anti-quark) in projectile nucleon (hadron) I. */
+/*PP(I, 10), PP(I, 11), PP(I, 12): three momentum ($p_x,p_y,p_z$) */
+/* (GeV/$c$) transferred to the quark or diquark (anti-quark) */
+/* in projectile nucleon (hadron) I from the last hard */
+/* scattering. */
+/*PP(I, 14): mass (GeV/$c^2$) of the quark in projectile nucleon */
+/* (hadron) I. */
+/*PP(I, 15): mass of the diquark (anti-quark) in projectile */
+/* nucleon (hadron) I. */
+/*NFT(I, 1--15), PT(I,1--15): give the same */
+/* information for the target nucleons (hadron) and the */
+/* corresponding quarks and diquarks (anti-quarks) as for */
+/* the projectile nucleons. */
+/* */
+/*=======================================================================*/
+}
+
+#endif
--- /dev/null
+############################### THijing Makefile ##############################
+
+# Include machine specific definitions
+
+include $(ALICE_ROOT)/conf/GeneralDef
+include $(ALICE_ROOT)/conf/MachineDef.$(ALICE_TARGET)
+
+PACKAGE = THijing
+
+# FORTRAN sources
+
+FSRCS =
+
+# C++ sources
+
+SRCS = THijing.cxx
+
+# C++ Headers
+
+HDRS = $(SRCS:.cxx=.h) THijingLinkDef.h
+
+# Library dictionary
+
+DICT = THijingCint.cxx
+DICTH = $(DICT:.cxx=.h)
+DICTO = $(patsubst %.cxx,tgt_$(ALICE_TARGET)/%.o,$(DICT))
+
+# Objects
+
+OBJS = $(patsubst %.cxx,tgt_$(ALICE_TARGET)/%.o,$(SRCS)) $(FOBJS) $(DICTO)
+
+# FORTRAN Objectrs
+
+FOBJS = $(patsubst %.F,tgt_$(ALICE_TARGET)/%.o,$(FSRCS))
+
+# C Objects
+
+COBJS = $(patsubst %.c,tgt_$(ALICE_TARGET)/%.o,$(CSRCS))
+
+# C++ Objects
+
+OBJS = $(patsubst %.cxx,tgt_$(ALICE_TARGET)/%.o,$(SRCS)) $(DICTO)
+
+# C++ compilation flags
+
+CXXFLAGS = $(CXXOPTS) -I$(ROOTSYS)/include -I. -I$(ALICE_ROOT)/include/
+
+# FORTRAN compilation flags
+
+FFLAGS = $(FOPT)
+
+##### TARGETS #####
+
+# Target
+
+SLIBRARY = $(LIBDIR)/libTHijing.$(SL)
+ALIBRARY = $(LIBDIR)/libTHijing.a
+
+default: $(SLIBRARY)
+
+$(LIBDIR)/libTHijing.$(SL): $(OBJS)
+
+$(DICT): $(HDRS)
+
+depend: $(SRCS) $(FSRCS)
+
+TOCLEAN = $(OBJS) *Cint.cxx *Cint.h
+
+CHECKS = $(patsubst %.cxx,check/%.viol,$(SRCS))
+
+############################### General Macros ################################
+
+include $(ALICE_ROOT)/conf/GeneralMacros
+
+############################ Dependencies #####################################
+
+-include tgt_$(ALICE_TARGET)/Make-depend
+
+
+
+
+
+
+
--- /dev/null
+////////////////////////////////////////////////////////////////////////////////
+// //
+// THijing //
+// //
+// THijing is an interface class to F77 version of Hijing 1.36 //
+// event generator, written by X.N. Wang and M. Gyulassy. //
+// For details see http://nta2.lbl.gov/~xnwang //
+// //
+// ************************************************** //
+// * | _______ / ------/ * //
+// * ----- ------ |_____| /_/ / * //
+// * || / |_____| / / * //
+// * /| /_/ /_______ /_ / _ * //
+// * / | / / / / / | ------- * //
+// * | / / / / | / | * //
+// * | / / / / _| / ------- * //
+// * * //
+// ************************************************** //
+// HIJING //
+// Heavy Ion Jet INteraction Generator //
+// by //
+// X. N. Wang and M. Gyulassy //
+// Lawrence Berkeley Laboratory //
+//****************************************************************************//
+
+//*KEEP,THIJING.
+#include "THijing.h"
+//*KEEP,HCOMMON.
+#include "Hcommon.h"
+//*KEEP,TMCParticle.
+//#include "TMCParticle.h"
+//*KEEP,TParticle,T=C++.
+#include "TParticle.h"
+//*KEND.
+
+//*KEEP,TCanvas.
+//#include "TCanvas.h"
+//*KEEP,TView.
+//#include "TView.h"
+//*KEEP,TROOT.
+#include "TROOT.h"
+//*KEEP,TPaveText.
+//#include "TPaveText.h"
+//*KEND.
+
+#ifndef WIN32
+# define hijset hijset_
+# define hijing hijing_
+# define type_of_call
+#else
+# define hijset HIJSET
+# define hijing HIJING
+# define type_of_call _stdcall
+#endif
+
+#ifndef WIN32
+//extern "C" void type_of_call hijset(float &efrm, const char *frame,
+// const char *proj, const char *targ,
+// int &iap, int &izp, int &iat,
+// int &izt, Long_t l_frame,
+// Long_t l_proj, Long_t l_targ);
+extern "C" void type_of_call hijset(Float_t & , const char *,
+ const char *, const char *,
+ Int_t & , Int_t &, Int_t &,
+ Int_t &, const int,
+ const int, const int);
+//extern "C" void type_of_call hijing(const char *frame, float &bmin,
+// float &bmax, Long_t l_frame);
+extern "C" void type_of_call hijing(const char *, Float_t &,
+ Float_t &, const int);
+#else
+//extern "C" void type_of_call hijset(float &efrm, const char *frame,
+// Long_t l_frame, const char *proj,
+// Long_t l_proj, const char *targ,
+// Long_t l_targ,
+// int &iap, int &izp, int &iat,
+// int &izt);
+//extern "C" void type_of_call hijing(const char *frame, Long_t l_frame,
+// float &bmin, float &bmax);
+#endif
+
+ClassImp(THijing)
+
+// void THijing::Streamer(TBuffer &R__b){}
+//______________________________________________________________________________
+THijing::THijing() : TGenerator("Hijing","Hijing")
+{
+// THijing constructor: creates a TClonesArray in which it will store all
+// particles. Note that there may be only one functional THijing object
+// at a time, so it's not use to create more than one instance of it.
+
+// delete fParticles; // was allocated as TObjArray in TGenerator
+
+// fParticles = new TClonesArray("TMCParticle",50);
+
+}
+
+//______________________________________________________________________________
+THijing::THijing(Float_t efrm, const char *frame="CMS",
+ const char *proj="A", const char *targ="A", Int_t iap=207,
+ Int_t izp=82, Int_t iat=207, Int_t izt=82, Float_t bmin=0,
+ Float_t bmax=20) : TGenerator("Hijing","Hijing")
+{
+// THijing constructor: creates a TClonesArray in which it will store all
+// particles. Note that there may be only one functional THijing object
+// at a time, so it's not use to create more than one instance of it.
+
+// delete fParticles; // was allocated as TObjArray in TGenerator
+
+// fParticles = new TClonesArray("TMCParticle",50);
+
+ fEfrm=efrm;
+ fFrame=frame;
+ fProj=proj;
+ fTarg=targ;
+ fIap=iap;
+ fIzp=izp;
+ fIat=iat;
+ fIzt=izt;
+ fBmin=bmin;
+ fBmax=bmax;
+}
+
+//______________________________________________________________________________
+THijing::~THijing()
+{
+// Destroys the object, deletes and disposes all TMCParticles currently on list.
+
+// if (fParticles) {
+// fParticles->Delete();
+// delete fParticles;
+// fParticles = 0;
+// }
+}
+
+//______________________________________________________________________________
+//void THijing::Draw(Option_t *option)
+//{
+// Event display - not supported for THijing yet.
+
+// if (!gPad) {
+// if (!gROOT->GetMakeDefCanvas()) return;
+// (gROOT->GetMakeDefCanvas())();
+// gPad->GetCanvas()->SetFillColor(13);
+// }
+
+// static Float_t rbox = 1000;
+// Float_t rmin[3],rmax[3];
+// TView *view = gPad->GetView();
+// if (!strstr(option,"same")) {
+// if (view) { view->GetRange(rmin,rmax); rbox = rmax[2];}
+// gPad->Clear();
+// }
+
+// AppendPad(option);
+
+// view = gPad->GetView();
+// // compute 3D view
+// if (view) {
+// view->GetRange(rmin,rmax);
+// rbox = rmax[2];
+// } else {
+// view = new TView(1);
+// view->SetRange(-rbox,-rbox,-rbox, rbox,rbox,rbox );
+// }
+
+// TPaveText *pt = new TPaveText(-0.94,0.85,-0.25,0.98,"br");
+// pt->AddText((char*)GetName());
+// pt->AddText((char*)GetTitle());
+// pt->SetFillColor(42);
+// pt->Draw();
+//}
+
+//______________________________________________________________________________
+//TObjArray *THijing::ImportParticles(Option_t *)
+//{
+// Fills TClonesArray fParticles list with particles from common LUJETS.
+// Old contents of a list are cleared. This function should be called after
+// any change in common LUJETS, however GetParticles() method calls it
+// automatically - user don't need to care about it. In case you make a call
+// to LuExec() you must call this method yourself to transfer new data from
+// common LUJETS to the fParticles list.
+//
+// fParticles->Clear();
+//
+// Int_t numpart = LUJETS.n;
+// TClonesArray &a = *((TClonesArray*)fParticles);
+//
+// for (Int_t i = 0; i < numpart; i++) {
+// new(a[i]) TMCParticle(LUJETS.k[0][i] ,
+// LUJETS.k[1][i] ,
+// LUJETS.k[2][i] ,
+// LUJETS.k[3][i] ,
+// LUJETS.k[4][i] ,
+//
+// LUJETS.p[0][i] ,
+// LUJETS.p[1][i] ,
+// LUJETS.p[2][i] ,
+// LUJETS.p[3][i] ,
+// LUJETS.p[4][i] ,
+//
+// LUJETS.v[0][i] ,
+// LUJETS.v[1][i] ,
+// LUJETS.v[2][i] ,
+// LUJETS.v[3][i] ,
+// LUJETS.v[4][i]);
+
+// }
+// return fParticles;
+//}
+
+//______________________________________________________________________________
+Int_t THijing::ImportParticles(TClonesArray *particles, Option_t *option)
+{
+//
+// Default primary creation method. It reads the /HEPEVT/ common block which
+// has been filled by the GenerateEvent method. If the event generator does
+// not use the HEPEVT common block, This routine has to be overloaded by
+// the subclasses.
+// The function loops on the generated particles and store them in
+// the TClonesArray pointed by the argument particles.
+// The default action is to store only the stable particles (ISTHEP = 1)
+// This can be demanded explicitly by setting the option = "Final"
+// If the option = "All", all the particles are stored.
+//
+ if (particles == 0) return 0;
+ TClonesArray &Particles = *particles;
+ Particles.Clear();
+ Int_t numpart = HIMAIN1.natt;
+ if (!strcmp(option,"") || !strcmp(option,"Final")) {
+ for (Int_t i = 0; i<=numpart; i++) {
+ if (HIMAIN2.katt[3][i] == 1) {
+//
+// Use the common block values for the TParticle constructor
+//
+ new(Particles[i]) TParticle(
+ HIMAIN2.katt[0][i] ,
+ HIMAIN2.katt[1][i] ,
+ HIMAIN2.katt[2][i] ,
+ -1,
+ -1,
+ -1,
+
+ HIMAIN2.patt[0][i] ,
+ HIMAIN2.patt[1][i] ,
+ HIMAIN2.patt[2][i] ,
+ HIMAIN2.patt[3][i] ,
+
+ 0,
+ 0,
+ 0,
+ 0);
+ }
+ }
+ }
+ else if (!strcmp(option,"All")) {
+ for (Int_t i = 0; i<=numpart; i++) {
+ new(Particles[i]) TParticle(
+ HIMAIN2.katt[0][i] ,
+ HIMAIN2.katt[1][i] ,
+ HIMAIN2.katt[2][i] ,
+ -1,
+ -1,
+ -1,
+
+ HIMAIN2.patt[0][i] ,
+ HIMAIN2.patt[1][i] ,
+ HIMAIN2.patt[2][i] ,
+ HIMAIN2.patt[3][i] ,
+
+ 0,
+ 0,
+ 0,
+ 0);
+ }
+ }
+ return numpart;
+}
+
+//______________________________________________________________________________
+void THijing::SetEFRM(Float_t efrm)
+{
+ fEfrm=efrm;
+}
+//______________________________________________________________________________
+void THijing::SetFRAME(const char* frame)
+{
+ fFrame=frame;
+}
+//______________________________________________________________________________
+void THijing::SetPROJ(const char* proj)
+{
+ fProj=proj;
+}
+//______________________________________________________________________________
+void THijing::SetTARG(const char* targ)
+{
+ fTarg=targ;
+}
+//______________________________________________________________________________
+void THijing::SetIAP(Int_t iap)
+{
+ fIap=iap;
+}
+//______________________________________________________________________________
+void THijing::SetIZP(Int_t izp)
+{
+ fIzp=izp;
+}
+//______________________________________________________________________________
+void THijing::SetIAT(Int_t iat)
+{
+ fIat=iat;
+}
+//______________________________________________________________________________
+void THijing::SetIZT(Int_t izt)
+{
+ fIzt=izt;
+}
+//______________________________________________________________________________
+void THijing::SetBMIN(Float_t bmin)
+{
+ fBmin=bmin;
+}
+//______________________________________________________________________________
+void THijing::SetBMAX(Float_t bmax)
+{
+ fBmax=bmax;
+}
+//______________________________________________________________________________
+Float_t THijing::GetEFRM() const
+{
+ return fEfrm;
+}
+//______________________________________________________________________________
+const char* THijing::GetFRAME() const
+{
+ return fFrame.Data();
+}
+//______________________________________________________________________________
+const char* THijing::GetPROJ() const
+{
+ return fProj;
+}
+//______________________________________________________________________________
+const char* THijing::GetTARG() const
+{
+ return fTarg;
+}
+//______________________________________________________________________________
+Int_t THijing::GetIAP() const
+{
+ return fIap;
+}
+//______________________________________________________________________________
+Int_t THijing::GetIZP() const
+{
+ return fIzp;
+}
+//______________________________________________________________________________
+Int_t THijing::GetIAT() const
+{
+ return fIat;
+}
+//______________________________________________________________________________
+Int_t THijing::GetIZT() const
+{
+ return fIzt;
+}
+//______________________________________________________________________________
+Float_t THijing::GetBMIN() const
+{
+ return fBmin;
+}
+//______________________________________________________________________________
+Float_t THijing::GetBMAX() const
+{
+ return fBmax;
+}
+
+//====================== access to common HIPARNT ===============================
+
+//______________________________________________________________________________
+void THijing::SetHIPR1(Int_t key,Float_t value)
+{
+ if ( key<1 || key>100 ) {
+ printf ("ERROR in THijing:SetHIPR1(key,value): \n ");
+ printf (" key=%i is out of range [1..100]!\n",key);
+ return;
+ }
+
+ HIPARNT.hipr1[key-1]=value;
+
+}
+
+//______________________________________________________________________________
+Float_t THijing::GetHIPR1(Int_t key) const
+{
+ if ( key<1 || key>100 ) {
+ printf ("ERROR in THijing:GetHIPR1(key): \n ");
+ printf (" key=%i is out of range [1..100]!\n",key);
+ return 0;
+ }
+
+ return HIPARNT.hipr1[key-1];
+
+}
+
+//______________________________________________________________________________
+void THijing::SetIHPR2(Int_t key,Int_t value)
+{
+ if ( key<1 || key>50 ) {
+ printf ("ERROR in THijing:SetIHPR2(key,value): \n ");
+ printf (" key=%i is out of range [1..50]!\n",key);
+ return;
+ }
+
+ HIPARNT.ihpr2[key-1]=value;
+
+}
+
+//______________________________________________________________________________
+Int_t THijing::GetIHPR2(Int_t key) const
+{
+ if ( key<1 || key>50 ) {
+ printf ("ERROR in THijing:GetIHPR2(key): \n ");
+ printf (" key=%i is out of range [1..50]!\n",key);
+ return 0;
+ }
+
+ return HIPARNT.ihpr2[key-1];
+
+}
+
+
+//______________________________________________________________________________
+Float_t THijing::GetHINT1(Int_t key) const
+{
+ if ( key<1 || key>100 ) {
+ printf ("ERROR in THijing:GetHINT1(key): \n ");
+ printf (" key=%i is out of range [1..100]!\n",key);
+ return 0;
+ }
+
+ return HIPARNT.hint1[key-1];
+
+}
+
+
+//______________________________________________________________________________
+Int_t THijing::GetIHNT2(Int_t key) const
+{
+ if ( key<1 || key>50 ) {
+ printf ("ERROR in THijing:GetIHNT2(key): \n ");
+ printf (" key=%i is out of range [1..50]!\n",key);
+ return 0;
+ }
+
+ return HIPARNT.ihnt2[key-1];
+
+}
+
+
+//====================== access to common HIMAIN1 ===============================
+
+//______________________________________________________________________________
+Int_t THijing::GetNATT() const
+{
+
+ return HIMAIN1.natt;
+
+}
+
+//______________________________________________________________________________
+Float_t THijing::GetEATT() const
+{
+
+ return HIMAIN1.eatt;
+
+}
+
+//______________________________________________________________________________
+Int_t THijing::GetJATT() const
+{
+
+ return HIMAIN1.jatt;
+
+}
+
+//______________________________________________________________________________
+Int_t THijing::GetNT() const
+{
+
+ return HIMAIN1.nt;
+
+}
+
+//______________________________________________________________________________
+Int_t THijing::GetNP() const
+{
+
+ return HIMAIN1.np;
+
+}
+
+
+//______________________________________________________________________________
+Int_t THijing::GetN0() const
+{
+
+ return HIMAIN1.n0;
+
+}
+//______________________________________________________________________________
+Int_t THijing::GetN01() const
+{
+
+ return HIMAIN1.n01;
+
+}
+
+//______________________________________________________________________________
+Int_t THijing::GetN10() const
+{
+
+ return HIMAIN1.n10;
+
+}
+
+//______________________________________________________________________________
+Int_t THijing::GetN11() const
+{
+
+ return HIMAIN1.n11;
+
+}
+
+//______________________________________________________________________________
+Float_t THijing::GetBB() const
+{
+
+ return HIMAIN1.bb;
+
+}
+
+//====================== access to common HIMAIN2 ===============================
+
+//______________________________________________________________________________
+Int_t THijing::GetKATT(Int_t key1, Int_t key2) const
+{
+ if ( key1<1 || key1>130000 ) {
+ printf("ERROR in THijing::GetKATT(key1,key2):\n");
+ printf(" key1=%i is out of range [1..130000]\n",key1);
+ return 0;
+ }
+
+ if ( key2<1 || key2>4 ) {
+ printf("ERROR in THijing::GetKATT(key1,key2):\n");
+ printf(" key2=%i is out of range [1..4]\n",key2);
+ return 0;
+ }
+
+ return HIMAIN2.katt[key2-1][key1-1];
+}
+
+//______________________________________________________________________________
+Float_t THijing::GetPATT(Int_t key1, Int_t key2) const
+{
+ if ( key1<1 || key1>130000 ) {
+ printf("ERROR in THijing::GetPATT(key1,key2):\n");
+ printf(" key1=%i is out of range [1..130000]\n",key1);
+ return 0;
+ }
+
+ if ( key2<1 || key2>4 ) {
+ printf("ERROR in THijing::GetPATT(key1,key2):\n");
+ printf(" key2=%i is out of range [1..4]\n",key2);
+ return 0;
+ }
+
+ return HIMAIN2.patt[key2-1][key1-1];
+}
+
+//====================== access to common HIJJET1 ===============================
+
+//______________________________________________________________________________
+Int_t THijing::GetNPJ(Int_t key) const
+{
+ if ( key<1 || key>300 ) {
+ printf("ERROR in THijing::GetNPJ(key):\n");
+ printf(" key=%i is out of range [1..300]\n",key);
+ return 0;
+ }
+ return HIJJET1.npj[key-1];
+}
+
+//______________________________________________________________________________
+Int_t THijing::GetKFPJ(Int_t key1, Int_t key2) const
+{
+ if ( key1<1 || key1>300 ) {
+ printf("ERROR in THijing::GetKFPJ(key1):\n");
+ printf(" key1=%i is out of range [1..300]\n",key1);
+ return 0;
+ }
+ if ( key2<1 || key2>500 ) {
+ printf("ERROR in THijing::GetKFPJ(key1,key2):\n");
+ printf(" key2=%i is out of range [1..500]\n",key2);
+ return 0;
+ }
+
+ return HIJJET1.kfpj[key2-1][key1-1];
+}
+
+//______________________________________________________________________________
+Float_t THijing::GetPJPX(Int_t key1, Int_t key2) const
+{
+ if ( key1<1 || key1>300 ) {
+ printf("ERROR in THijing::GetPJPX(key1):\n");
+ printf(" key1=%i is out of range [1..300]\n",key1);
+ return 0;
+ }
+ if ( key2<1 || key2>500 ) {
+ printf("ERROR in THijing::GetPJPX(key1,key2):\n");
+ printf(" key2=%i is out of range [1..500]\n",key2);
+ return 0;
+ }
+
+ return HIJJET1.pjpx[key2-1][key1-1];
+}
+
+//______________________________________________________________________________
+Float_t THijing::GetPJPY(Int_t key1, Int_t key2) const
+{
+ if ( key1<1 || key1>300 ) {
+ printf("ERROR in THijing::GetPJPY(key1):\n");
+ printf(" key1=%i is out of range [1..300]\n",key1);
+ return 0;
+ }
+ if ( key2<1 || key2>500 ) {
+ printf("ERROR in THijing::GetPJPY(key1,key2):\n");
+ printf(" key2=%i is out of range [1..500]\n",key2);
+ return 0;
+ }
+
+ return HIJJET1.pjpy[key2-1][key1-1];
+}
+
+//______________________________________________________________________________
+Float_t THijing::GetPJPZ(Int_t key1, Int_t key2) const
+{
+ if ( key1<1 || key1>300 ) {
+ printf("ERROR in THijing::GetPJPZ(key1):\n");
+ printf(" key1=%i is out of range [1..300]\n",key1);
+ return 0;
+ }
+ if ( key2<1 || key2>500 ) {
+ printf("ERROR in THijing::GetPJPZ(key1,key2):\n");
+ printf(" key2=%i is out of range [1..500]\n",key2);
+ return 0;
+ }
+
+ return HIJJET1.pjpz[key2-1][key1-1];
+}
+
+//______________________________________________________________________________
+Float_t THijing::GetPJPE(Int_t key1, Int_t key2) const
+{
+ if ( key1<1 || key1>300 ) {
+ printf("ERROR in THijing::GetPJPE(key1):\n");
+ printf(" key1=%i is out of range [1..300]\n",key1);
+ return 0;
+ }
+ if ( key2<1 || key2>500 ) {
+ printf("ERROR in THijing::GetPJPE(key1,key2):\n");
+ printf(" key2=%i is out of range [1..500]\n",key2);
+ return 0;
+ }
+
+ return HIJJET1.pjpe[key2-1][key1-1];
+}
+
+//______________________________________________________________________________
+Float_t THijing::GetPJPM(Int_t key1, Int_t key2) const
+{
+ if ( key1<1 || key1>300 ) {
+ printf("ERROR in THijing::GetPJPM(key1):\n");
+ printf(" key1=%i is out of range [1..300]\n",key1);
+ return 0;
+ }
+ if ( key2<1 || key2>500 ) {
+ printf("ERROR in THijing::GetPJPM(key1,key2):\n");
+ printf(" key2=%i is out of range [1..500]\n",key2);
+ return 0;
+ }
+
+ return HIJJET1.pjpm[key2-1][key1-1];
+}
+
+//______________________________________________________________________________
+Int_t THijing::GetNTJ(Int_t key) const
+{
+ if ( key<1 || key>300 ) {
+ printf("ERROR in THijing::GetNTJ(key):\n");
+ printf(" key=%i is out of range [1..300]\n",key);
+ return 0;
+ }
+ return HIJJET1.ntj[key-1];
+}
+
+//______________________________________________________________________________
+Int_t THijing::GetKFTJ(Int_t key1, Int_t key2) const
+{
+ if ( key1<1 || key1>300 ) {
+ printf("ERROR in THijing::GetKFTJ(key1):\n");
+ printf(" key1=%i is out of range [1..300]\n",key1);
+ return 0;
+ }
+ if ( key2<1 || key2>500 ) {
+ printf("ERROR in THijing::GetKFTJ(key1,key2):\n");
+ printf(" key2=%i is out of range [1..500]\n",key2);
+ return 0;
+ }
+
+ return HIJJET1.kftj[key2-1][key1-1];
+}
+
+//______________________________________________________________________________
+Float_t THijing::GetPJTX(Int_t key1, Int_t key2) const
+{
+ if ( key1<1 || key1>300 ) {
+ printf("ERROR in THijing::GetPJTX(key1):\n");
+ printf(" key1=%i is out of range [1..300]\n",key1);
+ return 0;
+ }
+ if ( key2<1 || key2>500 ) {
+ printf("ERROR in THijing::GetPJTX(key1,key2):\n");
+ printf(" key2=%i is out of range [1..500]\n",key2);
+ return 0;
+ }
+
+ return HIJJET1.pjtx[key2-1][key1-1];
+}
+
+//______________________________________________________________________________
+Float_t THijing::GetPJTY(Int_t key1, Int_t key2) const
+{
+ if ( key1<1 || key1>300 ) {
+ printf("ERROR in THijing::GetPJTY(key1):\n");
+ printf(" key1=%i is out of range [1..300]\n",key1);
+ return 0;
+ }
+ if ( key2<1 || key2>500 ) {
+ printf("ERROR in THijing::GetPJTY(key1,key2):\n");
+ printf(" key2=%i is out of range [1..500]\n",key2);
+ return 0;
+ }
+
+ return HIJJET1.pjty[key2-1][key1-1];
+}
+
+//______________________________________________________________________________
+Float_t THijing::GetPJTZ(Int_t key1, Int_t key2) const
+{
+ if ( key1<1 || key1>300 ) {
+ printf("ERROR in THijing::GetPJTZ(key1):\n");
+ printf(" key1=%i is out of range [1..300]\n",key1);
+ return 0;
+ }
+ if ( key2<1 || key2>500 ) {
+ printf("ERROR in THijing::GetPJTZ(key1,key2):\n");
+ printf(" key2=%i is out of range [1..500]\n",key2);
+ return 0;
+ }
+
+ return HIJJET1.pjtz[key2-1][key1-1];
+}
+
+//______________________________________________________________________________
+Float_t THijing::GetPJTE(Int_t key1, Int_t key2) const
+{
+ if ( key1<1 || key1>300 ) {
+ printf("ERROR in THijing::GetPJTE(key1):\n");
+ printf(" key1=%i is out of range [1..300]\n",key1);
+ return 0;
+ }
+ if ( key2<1 || key2>500 ) {
+ printf("ERROR in THijing::GetPJTE(key1,key2):\n");
+ printf(" key2=%i is out of range [1..500]\n",key2);
+ return 0;
+ }
+
+ return HIJJET1.pjte[key2-1][key1-1];
+}
+
+//______________________________________________________________________________
+Float_t THijing::GetPJTM(Int_t key1, Int_t key2) const
+{
+ if ( key1<1 || key1>300 ) {
+ printf("ERROR in THijing::GetPJTM(key1):\n");
+ printf(" key1=%i is out of range [1..300]\n",key1);
+ return 0;
+ }
+ if ( key2<1 || key2>500 ) {
+ printf("ERROR in THijing::GetPJTM(key1,key2):\n");
+ printf(" key2=%i is out of range [1..500]\n",key2);
+ return 0;
+ }
+
+ return HIJJET1.pjtm[key2-1][key1-1];
+}
+
+//====================== access to common HIJJET1 ===============================
+
+//______________________________________________________________________________
+Int_t THijing::GetNSG() const
+{
+ return HIJJET2.nsg;
+}
+
+//______________________________________________________________________________
+Int_t THijing::GetNJSG(Int_t key) const
+{
+ if ( key<1 || key>900 ) {
+ printf ("ERROR in THijing:GetNJSG(key): \n ");
+ printf (" key=%i is out of range [1..900]!\n",key);
+ return 0;
+ }
+
+ return HIJJET2.njsg[key-1];
+
+}
+
+//______________________________________________________________________________
+Int_t THijing::GetIASG(Int_t key1, Int_t key2) const
+{
+ if ( key1<1 || key1>900 ) {
+ printf("ERROR in THijing::GetIASG(key1):\n");
+ printf(" key1=%i is out of range [1..900]\n",key1);
+ return 0;
+ }
+ if ( key2<1 || key2>3 ) {
+ printf("ERROR in THijing::GetIASG(key1,key2):\n");
+ printf(" key2=%i is out of range [1..3]\n",key2);
+ return 0;
+ }
+
+ return HIJJET2.iasg[key2-1][key1-1];
+}
+
+//______________________________________________________________________________
+Int_t THijing::GetK1SG(Int_t key1, Int_t key2) const
+{
+ if ( key1<1 || key1>900 ) {
+ printf("ERROR in THijing::GetK1SG(key1):\n");
+ printf(" key1=%i is out of range [1..900]\n",key1);
+ return 0;
+ }
+ if ( key2<1 || key2>100 ) {
+ printf("ERROR in THijing::GetK1SG(key1,key2):\n");
+ printf(" key2=%i is out of range [1..100]\n",key2);
+ return 0;
+ }
+
+ return HIJJET2.k1sg[key2-1][key1-1];
+}
+
+//______________________________________________________________________________
+Int_t THijing::GetK2SG(Int_t key1, Int_t key2) const
+{
+ if ( key1<1 || key1>900 ) {
+ printf("ERROR in THijing::GetK2SG(key1):\n");
+ printf(" key1=%i is out of range [1..900]\n",key1);
+ return 0;
+ }
+ if ( key2<1 || key2>100 ) {
+ printf("ERROR in THijing::GetK2SG(key1,key2):\n");
+ printf(" key2=%i is out of range [1..100]\n",key2);
+ return 0;
+ }
+
+ return HIJJET2.k2sg[key2-1][key1-1];
+}
+
+//______________________________________________________________________________
+Float_t THijing::GetPXSG(Int_t key1, Int_t key2) const
+{
+ if ( key1<1 || key1>900 ) {
+ printf("ERROR in THijing::GetPXSG(key1):\n");
+ printf(" key1=%i is out of range [1..900]\n",key1);
+ return 0;
+ }
+ if ( key2<1 || key2>100 ) {
+ printf("ERROR in THijing::GetPXSG(key1,key2):\n");
+ printf(" key2=%i is out of range [1..100]\n",key2);
+ return 0;
+ }
+
+ return HIJJET2.pxsg[key2-1][key1-1];
+}
+
+//______________________________________________________________________________
+Float_t THijing::GetPYSG(Int_t key1, Int_t key2) const
+{
+ if ( key1<1 || key1>900 ) {
+ printf("ERROR in THijing::GetPYSG(key1):\n");
+ printf(" key1=%i is out of range [1..900]\n",key1);
+ return 0;
+ }
+ if ( key2<1 || key2>100 ) {
+ printf("ERROR in THijing::GetPYSG(key1,key2):\n");
+ printf(" key2=%i is out of range [1..100]\n",key2);
+ return 0;
+ }
+
+ return HIJJET2.pysg[key2-1][key1-1];
+}
+
+//______________________________________________________________________________
+Float_t THijing::GetPZSG(Int_t key1, Int_t key2) const
+{
+ if ( key1<1 || key1>900 ) {
+ printf("ERROR in THijing::GetPZSG(key1):\n");
+ printf(" key1=%i is out of range [1..900]\n",key1);
+ return 0;
+ }
+ if ( key2<1 || key2>100 ) {
+ printf("ERROR in THijing::GetPZSG(key1,key2):\n");
+ printf(" key2=%i is out of range [1..100]\n",key2);
+ return 0;
+ }
+
+ return HIJJET2.pzsg[key2-1][key1-1];
+}
+
+//______________________________________________________________________________
+Float_t THijing::GetPESG(Int_t key1, Int_t key2) const
+{
+ if ( key1<1 || key1>900 ) {
+ printf("ERROR in THijing::GetPESG(key1):\n");
+ printf(" key1=%i is out of range [1..900]\n",key1);
+ return 0;
+ }
+ if ( key2<1 || key2>100 ) {
+ printf("ERROR in THijing::GetPESG(key1,key2):\n");
+ printf(" key2=%i is out of range [1..100]\n",key2);
+ return 0;
+ }
+
+ return HIJJET2.pesg[key2-1][key1-1];
+}
+
+//______________________________________________________________________________
+Float_t THijing::GetPMSG(Int_t key1, Int_t key2) const
+{
+ if ( key1<1 || key1>900 ) {
+ printf("ERROR in THijing::GetPMSG(key1):\n");
+ printf(" key1=%i is out of range [1..900]\n",key1);
+ return 0;
+ }
+ if ( key2<1 || key2>100 ) {
+ printf("ERROR in THijing::GetPMSG(key1,key2):\n");
+ printf(" key2=%i is out of range [1..100]\n",key2);
+ return 0;
+ }
+
+ return HIJJET2.pmsg[key2-1][key1-1];
+}
+
+//====================== access to common HISTRNG ===============================
+
+//______________________________________________________________________________
+Int_t THijing::GetNFP(Int_t key1, Int_t key2) const
+{
+ if ( key1<1 || key1>300 ) {
+ printf("ERROR in THijing::GetNFP(key1):\n");
+ printf(" key1=%i is out of range [1..300]\n",key1);
+ return 0;
+ }
+ if ( key2<1 || key2>15 ) {
+ printf("ERROR in THijing::GetNFP(key1,key2):\n");
+ printf(" key2=%i is out of range [1..15]\n",key2);
+ return 0;
+ }
+
+ return HISTRNG.nfp[key2-1][key1-1];
+}
+
+//______________________________________________________________________________
+Float_t THijing::GetPP(Int_t key1, Int_t key2) const
+{
+ if ( key1<1 || key1>300 ) {
+ printf("ERROR in THijing::GetPP(key1):\n");
+ printf(" key1=%i is out of range [1..300]\n",key1);
+ return 0;
+ }
+ if ( key2<1 || key2>15 ) {
+ printf("ERROR in THijing::GetPP(key1,key2):\n");
+ printf(" key2=%i is out of range [1..15]\n",key2);
+ return 0;
+ }
+
+ return HISTRNG.pp[key2-1][key1-1];
+}
+
+//______________________________________________________________________________
+Int_t THijing::GetNFT(Int_t key1, Int_t key2) const
+{
+ if ( key1<1 || key1>300 ) {
+ printf("ERROR in THijing::GetNFT(key1):\n");
+ printf(" key1=%i is out of range [1..300]\n",key1);
+ return 0;
+ }
+ if ( key2<1 || key2>15 ) {
+ printf("ERROR in THijing::GetNFT(key1,key2):\n");
+ printf(" key2=%i is out of range [1..15]\n",key2);
+ return 0;
+ }
+
+ return HISTRNG.nft[key2-1][key1-1];
+}
+
+//______________________________________________________________________________
+Float_t THijing::GetPT(Int_t key1, Int_t key2) const
+{
+ if ( key1<1 || key1>300 ) {
+ printf("ERROR in THijing::GetPT(key1):\n");
+ printf(" key1=%i is out of range [1..300]\n",key1);
+ return 0;
+ }
+ if ( key2<1 || key2>15 ) {
+ printf("ERROR in THijing::GetPT(key1,key2):\n");
+ printf(" key2=%i is out of range [1..15]\n",key2);
+ return 0;
+ }
+
+ return HISTRNG.pt[key2-1][key1-1];
+}
+
+
+
+//====================== access to Hijing subroutines =========================
+
+
+//______________________________________________________________________________
+void THijing::Initialize()
+{
+//////////////////////////////////////////////////////////////////////////////////
+// Calls Hijset with the either default parameters or the ones set by the user //
+// via SetEFRM, SetFRAME, SetPROJ, SetTARG, SetIAP, SetIZP, SetIAT, SetIZT //
+//////////////////////////////////////////////////////////////////////////////////
+
+ if ( (!strcmp(fFrame.Data(), "CMS" )) &&
+ (!strcmp(fFrame.Data(), "LAB" ))){
+ printf("WARNING! In THijing:Initialize():\n");
+ printf(" specified frame=%s is neither CMS or LAB\n",fFrame.Data());
+ printf(" resetting to default \"CMS\" .");
+ fFrame="CMS";
+ }
+
+ if ( (!strcmp(fProj.Data(), "A" )) &&
+ (!strcmp(fProj.Data(), "P" )) &&
+ (!strcmp(fProj.Data(), "PBAR" ))){
+ printf("WARNING! In THijing:Initialize():\n");
+ printf(" specified projectile=%s is neither A, P or PBAR\n",fProj.Data());
+ printf(" resetting to default \"A\" .");
+ fProj="A";
+ }
+
+ if ( (!strcmp(fTarg.Data(), "A" )) &&
+ (!strcmp(fTarg.Data(), "P" )) &&
+ (!strcmp(fTarg.Data(), "PBAR" ))){
+ printf("WARNING! In THijing:Initialize():\n");
+ printf(" specified target=%s is neither A, P or PBAR\n",fTarg.Data());
+ printf(" resetting to default \"A\" .");
+ fTarg="A";
+ }
+
+
+
+ Hijset(fEfrm,fFrame.Data(),fProj.Data(),fTarg.Data(),fIap,fIzp,fIat,fIzt);
+
+ printf(" %s-%s at %f GeV \n",fProj.Data(),fTarg.Data(),fEfrm);
+}
+
+
+//______________________________________________________________________________
+void THijing::GenerateEvent()
+{
+// Generates one event;
+
+ Hijing(fFrame.Data(),fBmin,fBmax);
+
+}
+//______________________________________________________________________________
+void THijing::Hijset(float efrm, const char *frame, const char *proj,
+ const char *targ, int iap, int izp, int iat, int izt)
+{
+// Call HIJING routine HIJSET passing the parameters in a way accepted by
+// Fortran routines
+
+ int s1 = strlen(frame);
+ int s2 = strlen(proj);
+ int s3 = strlen(targ);
+ printf("s1 = %d s2 = %d s3 = %d\n",s1,s2,s3);
+#ifndef WIN32
+ hijset(efrm, frame, proj, targ, iap, izp, iat, izt, s1, s2, s3);
+#else
+ hijset(efrm, frame, s1, proj, s2, targ, s3, iap, izp, iat, izt);
+#endif
+}
+//______________________________________________________________________________
+void THijing::Hijing(const char *frame, float bmin, float bmax)
+{
+// Call HIJING routine HIJSET passing the parameters in a way accepted by
+// Fortran routines
+
+ int s1 = strlen(frame);
+
+#ifndef WIN32
+ hijing(frame, bmin, bmax, s1);
+#else
+ hijing(frame, s1, bmin, bmax);
+#endif
+}
--- /dev/null
+#ifndef ROOT_THijing
+#define ROOT_THijing
+
+//+SEQ,CopyRight,T=NOINCLUDE.
+
+//////////////////////////////////////////////////////////////////////////
+// //
+// THijing //
+// //
+// This class implements an interface to the Hijing event generator. //
+// //
+//////////////////////////////////////////////////////////////////////////
+
+#ifndef ROOT_TGenerator
+//*KEEP,TGenerator.
+#include "TGenerator.h"
+//*KEND.
+#endif
+
+class THijing : public TGenerator {
+
+protected:
+
+ Float_t fEfrm;
+ TString fFrame;
+ TString fProj;
+ TString fTarg;
+ Int_t fIap;
+ Int_t fIzp;
+ Int_t fIat;
+ Int_t fIzt;
+ Float_t fBmin;
+ Float_t fBmax;
+
+public:
+
+ THijing();
+ THijing(Float_t efrm, const char *frame, const char *proj, const char *targ,
+ Int_t iap, Int_t izp, Int_t iat, Int_t izt, Float_t bmin,
+ Float_t bmax);
+ virtual ~THijing();
+
+ virtual void Initialize();
+
+ virtual void GenerateEvent();
+
+ virtual Int_t ImportParticles(TClonesArray *particles, Option_t *option="");
+
+// virtual void SetupTest();
+
+
+ //Parameters for the generation:
+
+ virtual void SetEFRM(Float_t efrm);
+ virtual Float_t GetEFRM() const;
+
+ virtual void SetFRAME(const char *frame);
+ virtual const char *GetFRAME() const;
+
+ virtual void SetPROJ(const char *frame);
+ virtual const char *GetPROJ() const;
+
+ virtual void SetTARG(const char *frame);
+ virtual const char *GetTARG() const;
+
+ virtual void SetIAP(Int_t iap);
+ virtual Int_t GetIAP() const;
+
+ virtual void SetIZP(Int_t izp);
+ virtual Int_t GetIZP() const;
+
+ virtual void SetIAT(Int_t iat);
+ virtual Int_t GetIAT() const;
+
+ virtual void SetIZT(Int_t izt);
+ virtual Int_t GetIZT() const;
+
+ virtual void SetBMIN(Float_t bmin);
+ virtual Float_t GetBMIN() const;
+
+ virtual void SetBMAX(Float_t bmax);
+ virtual Float_t GetBMAX() const;
+
+ //common HIPARNT access routines:
+
+ virtual void SetHIPR1(Int_t key, Float_t value);
+ virtual Float_t GetHIPR1(Int_t key) const;
+
+ virtual void SetIHPR2(Int_t key, Int_t value);
+ virtual Int_t GetIHPR2(Int_t key) const;
+
+ virtual Float_t GetHINT1(Int_t key) const;
+
+ virtual Int_t GetIHNT2(Int_t key) const;
+
+ //common HIMAIN1 access routines - read-only common:
+
+ virtual Int_t GetNATT() const;
+
+ virtual Float_t GetEATT() const;
+
+ virtual Int_t GetJATT() const;
+
+ virtual Int_t GetNT() const;
+
+ virtual Int_t GetNP() const;
+
+ virtual Int_t GetN0() const;
+
+ virtual Int_t GetN01() const;
+
+ virtual Int_t GetN10() const;
+
+ virtual Int_t GetN11() const;
+
+ virtual Float_t GetBB() const;
+
+
+ // common HIMAIN2 access routines - read-only common:
+
+ virtual Int_t GetKATT(Int_t key1, Int_t key2) const;
+
+ virtual Float_t GetPATT(Int_t key1, Int_t key2) const;
+
+
+ // common HIJJET1 access routines - read-only common:
+
+ virtual Int_t GetNPJ(Int_t key) const;
+
+ virtual Int_t GetKFPJ(Int_t key1, Int_t key2) const;
+
+ virtual Float_t GetPJPX(Int_t key1, Int_t key2) const;
+
+ virtual Float_t GetPJPY(Int_t key1, Int_t key2) const;
+
+ virtual Float_t GetPJPZ(Int_t key1, Int_t key2) const;
+
+ virtual Float_t GetPJPE(Int_t key1, Int_t key2) const;
+
+ virtual Float_t GetPJPM(Int_t key1, Int_t key2) const;
+
+ virtual Int_t GetNTJ(Int_t key) const;
+
+ virtual Int_t GetKFTJ(Int_t key1, Int_t key2) const;
+
+ virtual Float_t GetPJTX(Int_t key1, Int_t key2) const;
+
+ virtual Float_t GetPJTY(Int_t key1, Int_t key2) const;
+
+ virtual Float_t GetPJTZ(Int_t key1, Int_t key2) const;
+
+ virtual Float_t GetPJTE(Int_t key1, Int_t key2) const;
+
+ virtual Float_t GetPJTM(Int_t key1, Int_t key2) const;
+
+
+ // common HIJJET2 access routines - read-only common:
+
+ virtual Int_t GetNSG() const;
+
+ virtual Int_t GetNJSG(Int_t key) const;
+
+ virtual Int_t GetIASG(Int_t key1, Int_t key2) const;
+
+ virtual Int_t GetK1SG(Int_t key1, Int_t key2) const;
+
+ virtual Int_t GetK2SG(Int_t key1, Int_t key2) const;
+
+ virtual Float_t GetPXSG(Int_t key1, Int_t key2) const;
+
+ virtual Float_t GetPYSG(Int_t key1, Int_t key2) const;
+
+ virtual Float_t GetPZSG(Int_t key1, Int_t key2) const;
+
+ virtual Float_t GetPESG(Int_t key1, Int_t key2) const;
+
+ virtual Float_t GetPMSG(Int_t key1, Int_t key2) const;
+
+ // common HISTRNG access routines - read-only common:
+
+ virtual Int_t GetNFP(Int_t key1, Int_t key2) const;
+
+ virtual Float_t GetPP(Int_t key1, Int_t key2) const;
+
+ virtual Int_t GetNFT(Int_t key1, Int_t key2) const;
+
+ virtual Float_t GetPT(Int_t key1, Int_t key2) const;
+
+ // access to HIJING routines:
+
+ virtual void Hijset(float efrm, const char* frame, const char*
+ proj, const char* targ, int iap, int izp,
+ int iat, int izt);
+
+ virtual void Hijing(const char* frame, float bmin, float bmax);
+
+ ClassDef(THijing,1) //Interface to Hijing Event Generator
+};
+
+#endif
--- /dev/null
+#ifdef __CINT__
+
+#pragma link off all globals;
+#pragma link off all classes;
+#pragma link off all functions;
+
+#pragma link C++ class THijing;
+
+#endif
git://git.uio.no / u / mrichter / AliRoot.git / commitdiff