{
Int_t i, j, k;
Double_t fCut;
+ Double_t zero, one, two, three;
+ FILE *pAliceCoreInp, *pAliceFlukaMat, *pAliceInp;
+
+ zero = 0.0;
+ one = 1.0;
+ two = 2.0;
+ three = 3.0;
+
FGeometryInit* geominit = FGeometryInit::GetInstance();
Float_t fLastMaterial = geominit->GetLastMaterialIndex();
printf(" last FLUKA material is %g\n", fLastMaterial);
TString sAliceTmp = "flukaMat.inp";
TString sAliceInp = GetInputFileName();
sAliceCoreInp += GetCoreInputFileName();
- ifstream AliceCoreInp(sAliceCoreInp.Data());
- ifstream AliceFlukaMat(sAliceTmp.Data());
- ofstream AliceInp(sAliceInp.Data());
+/* open files */
+ if ((pAliceCoreInp = fopen("AliceCoreInp.Data()","r")) == NULL) {
+ printf("\nCannot open file %s\n",sAliceCoreInp.Data());
+ exit(1);
+ }
+ if ((pAliceFlukaMat = fopen("sAliceTmp.Data()","r")) == NULL) {
+ printf("\nCannot open file %s\n",sAliceTmp.Data());
+ exit(1);
+ }
+ if ((pAliceInp = fopen("sAliceInp.Data()","w")) == NULL) {
+ printf("\nCannot open file %s\n",sAliceInp.Data());
+ exit(1);
+ }
// copy core input file
Char_t sLine[255];
Float_t fEventsPerRun;
- while (AliceCoreInp.getline(sLine,255)) {
+ while ((fgets(sLine,255,pAliceCoreInp)) != NULL) {
if (strncmp(sLine,"GEOEND",6) != 0)
- AliceInp << sLine << endl; // copy until GEOEND card
+ fprintf(pAliceInp,"%s\n",sLine); // copy until GEOEND card
else {
- AliceInp << "GEOEND" << endl; // add GEOEND card
+ fprintf(pAliceInp,"GEOEND\n"); // add GEOEND card
goto flukamat;
}
} // end of while until GEOEND card
flukamat:
- while (AliceFlukaMat.getline(sLine,255)) { // copy flukaMat.inp file
- AliceInp << sLine << endl;
+ while ((fgets(sLine,255,pAliceFlukaMat)) != NULL) { // copy flukaMat.inp file
+ fprintf(pAliceInp,"%s\n",sLine);
}
- while (AliceCoreInp.getline(sLine,255)) {
+ while ((fgets(sLine,255,pAliceCoreInp)) != NULL) {
if (strncmp(sLine,"START",5) != 0)
- AliceInp << sLine << endl;
+ fprintf(pAliceInp,"%s\n",sLine);
else {
sscanf(sLine+10,"%10f",&fEventsPerRun);
goto fin;
//
// Loop over number of SetProcess calls
- AliceInp << "*----------------------------------------------------------------------------- ";
- AliceInp << endl;
- AliceInp << "*----- The following data are generated from SetProcess and SetCut calls ----- ";
- AliceInp << endl;
- AliceInp << "*----------------------------------------------------------------------------- ";
- AliceInp << endl;
+ fprintf(pAliceInp,"*----------------------------------------------------------------------------- \n");
+ fprintf(pAliceInp,"*----- The following data are generated from SetProcess and SetCut calls ----- \n");
+ fprintf(pAliceInp,"*----------------------------------------------------------------------------- \n");
for (i=0; i<iNbOfProc; i++) {
// annihilation
// gMC ->SetProcess("ANNI",1); // EMFCUT -1. 0. 0. 3. lastmat 0. ANNH-THR
if (strncmp(&sProcessFlag[i][0],"ANNI",4) == 0) {
if (iProcessValue[i] == 1 || iProcessValue[i] == 2) {
- AliceInp << "*";
- AliceInp << endl;
- AliceInp << "*Kinetic energy threshold (GeV) for e+ annihilation - resets to default=0.";
- AliceInp << endl;
- AliceInp << "*Generated from call: SetProcess('ANNI',1) or SetProcess('ANNI',2)";
- AliceInp << endl;
- AliceInp << setw(10) << "EMFCUT ";
- AliceInp << setiosflags(ios::scientific) << setprecision(5);
- AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
- AliceInp << setw(10) << -1.0; // kinetic energy threshold (GeV) for e+ annihilation (resets to default=0)
- AliceInp << setw(10) << 0.0; // not used
- AliceInp << setw(10) << 0.0; // not used
- AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply
- AliceInp << setw(10) << setprecision(2);
- AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply
- AliceInp << setprecision(1);
- AliceInp << setw(10) << 1.0; // step length in assigning indices
- AliceInp << setw(8) << "ANNH-THR";
- AliceInp << endl;
+ fprintf(pAliceInp,"*\n*Kinetic energy threshold (GeV) for e+ annihilation - resets to default=0.\n");
+ fprintf(pAliceInp,"*Generated from call: SetProcess('ANNI',1) or SetProcess('ANNI',2)\n");
+ // -one = kinetic energy threshold (GeV) for e+ annihilation (resets to default=0)
+ // zero = not used
+ // zero = not used
+ // three = lower bound of the material indices in which the respective thresholds apply
+ // fLastMaterial = upper bound of the material indices in which the respective thresholds apply
+ // one = step length in assigning indices
+ // "ANNH-THR";
+ fprintf(pAliceInp,"EMFCUT %f10.1%f10.1%f10.1%f10.1%f10.1%f10.1ANNH-THR\n",-one,zero,zero,three,fLastMaterial,one);
}
else if (iProcessValue[i] == 0) {
- AliceInp << "*";
- AliceInp << endl;
- AliceInp << "*No annihilation - no FLUKA card generated";
- AliceInp << endl;
- AliceInp << "*Generated from call: SetProcess('ANNI',0)";
- AliceInp << endl;
+ fprintf(pAliceInp,"*\n*No annihilation - no FLUKA card generated\n");
+ fprintf(pAliceInp,"*Generated from call: SetProcess('ANNI',0)\n");
}
else {
- AliceInp << "*";
- AliceInp << endl;
- AliceInp << "*Illegal flag value in SetProcess('ANNI',?) call.";
- AliceInp << endl;
- AliceInp << "*No FLUKA card generated";
- AliceInp << endl;
+ fprintf(pAliceInp,"*\n*Illegal flag value in SetProcess('ANNI',?) call.\n");
+ fprintf(pAliceInp,"*No FLUKA card generated\n");
}
}
// flag = 1 bremsstrahlung, photon processed
// flag = 2 bremsstrahlung, no photon stored
// gMC ->SetProcess("BREM",1); // PAIRBREM 2. 0. 0. 3. lastmat
- // EMFCUT -1. 0. 0. 3. lastmat 0. ELPO-THR
+ // EMFCUT -1. 0. 0. 3. lastmat 0. ELPO-THR
// G3 default value: 1
// G4 processes: G4GammaConversion,
// G4MuPairProduction/G4IMuPairProduction
// flag = 1 delta rays, secondaries processed
// flag = 2 delta rays, no secondaries stored
// gMC ->SetProcess("PAIR",1); // PAIRBREM 1. 0. 0. 3. lastmat
- // EMFCUT 0. 0. -1. 3. lastmat 0. PHOT-THR
+ // EMFCUT 0. 0. -1. 3. lastmat 0. PHOT-THR
else if ((strncmp(&sProcessFlag[i][0],"PAIR",4) == 0) && (iProcessValue[i] == 1 || iProcessValue[i] == 2)) {
for (j=0; j<iNbOfProc; j++) {
if ((strncmp(&sProcessFlag[j][0],"BREM",4) == 0) && (iProcessValue[j] == 1 || iProcessValue[j] == 2)) {
- AliceInp << "*";
- AliceInp << endl;
- AliceInp << "*Bremsstrahlung and pair production by muons and charged hadrons both activated";
- AliceInp << endl;
- AliceInp << "*Generated from call: SetProcess('BREM',1) and SetProcess('PAIR',1)";
- AliceInp << endl;
- AliceInp << "*Energy threshold set by call SetCut('BCUTM',cut) or set to 0.";
- AliceInp << endl;
- AliceInp << "*Energy threshold set by call SetCut('PPCUTM',cut) or set to 0.";
- AliceInp << endl;
- AliceInp << setw(10) << "PAIRBREM ";
- AliceInp << setiosflags(ios::scientific) << setprecision(5);
- AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
- AliceInp << setw(10) << 3.0; // bremsstrahlung and pair production by muons and charged hadrons both are activated
+ fprintf(pAliceInp,"*\n*Bremsstrahlung and pair production by muons and charged hadrons both activated\n");
+ fprintf(pAliceInp,"*Generated from call: SetProcess('BREM',1) and SetProcess('PAIR',1)\n");
+ fprintf(pAliceInp,"*Energy threshold set by call SetCut('BCUTM',cut) or set to 0.\n");
+ fprintf(pAliceInp,"*Energy threshold set by call SetCut('PPCUTM',cut) or set to 0.\n");
+ // three = bremsstrahlung and pair production by muons and charged hadrons both are activated
+ fprintf(pAliceInp,"PAIRBREM %f10.1",three);
// direct pair production by muons
// G4 particles: "e-", "e+"
// G3 default value: 0.01 GeV
for (k=0; k<iNbOfCut; k++) {
if (strncmp(&sCutFlag[k][0],"PPCUTM",6) == 0) fCut = fCutValue[k];
}
- AliceInp << setiosflags(ios::scientific) << setprecision(5);
- AliceInp << setw(10) << fCut; // e+, e- kinetic energy threshold (in GeV) for explicit pair production.
+ fprintf(pAliceInp,"%e10.4",fCut);
+ // fCut; = e+, e- kinetic energy threshold (in GeV) for explicit pair production.
// muon and hadron bremsstrahlung
// G4 particles: "gamma"
// G3 default value: CUTGAM=0.001 GeV
for (k=0; k<iNbOfCut; k++) {
if (strncmp(&sCutFlag[k][0],"BCUTM",5) == 0) fCut = fCutValue[k];
}
- AliceInp << setiosflags(ios::scientific) << setprecision(5);
- AliceInp << setw(10) << fCut; // photon energy threshold (GeV) for explicit bremsstrahlung production
- AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
- AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply
- AliceInp << setw(10) << setprecision(2);
- AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply
- AliceInp << endl;
+ fprintf(pAliceInp,"%e10.4%f10.1%10.1\n",fCut,three,fLastMaterial);
+ // fCut = photon energy threshold (GeV) for explicit bremsstrahlung production
+ // three = lower bound of the material indices in which the respective thresholds apply
+ // fLastMaterial = upper bound of the material indices in which the respective thresholds apply
// for e+ and e-
- AliceInp << "*";
- AliceInp << endl;
- AliceInp << "*Kinetic energy threshold (GeV) for e+/e- bremsstrahlung - resets to default=0.";
- AliceInp << endl;
- AliceInp << "*Generated from call: SetProcess('BREM',1);";
- AliceInp << endl;
- AliceInp << setw(10) << "EMFCUT ";
+ fprintf(pAliceInp,"*\n*Kinetic energy threshold (GeV) for e+/e- bremsstrahlung - resets to default=0.\n");
+ fprintf(pAliceInp,"*Generated from call: SetProcess('BREM',1);\n");
fCut = -1.0;
for (k=0; k<iNbOfCut; k++) {
if (strncmp(&sCutFlag[k][0],"BCUTE",5) == 0) fCut = fCutValue[k];
}
- AliceInp << setiosflags(ios::scientific) << setprecision(5);
- AliceInp << setw(10) << fCut; // kinetic energy threshold (GeV) for e+/e- bremsstrahlung (resets to default=0)
- AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
- AliceInp << setw(10) << 0.0; // not used
- AliceInp << setw(10) << 0.0; // not used
- AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply
- AliceInp << setw(10) << setprecision(2);
- AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply
- AliceInp << setprecision(1);
- AliceInp << setw(10) << 1.0; // step length in assigning indices
- AliceInp << setw(8) << "ELPO-THR";
- AliceInp << endl;
+ //fCut = kinetic energy threshold (GeV) for e+/e- bremsstrahlung (resets to default=0)
+ // zero = not used
+ // zero = not used
+ // three = lower bound of the material indices in which the respective thresholds apply
+ // fLastMaterial = upper bound of the material indices in which the respective thresholds apply
+ // one = step length in assigning indices
+ // "ELPO-THR";
+ fprintf(pAliceInp,"EMFCUT %e10.4%f10.1%f10.1%f10.1%f10.1%f10.1ELPO-THR\n",fCut,zero,zero,three,fLastMaterial,one);
// for e+ and e-
- AliceInp << "*";
- AliceInp << endl;
- AliceInp << "*Pair production by electrons is activated";
- AliceInp << endl;
- AliceInp << "*Generated from call: SetProcess('PAIR',1);";
- AliceInp << endl;
- AliceInp << setw(10) << "EMFCUT ";
- AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
- AliceInp << setw(10) << 0.0; // energy threshold (GeV) for Compton scattering (= 0.0 : ignored)
- AliceInp << setw(10) << 0.0; // energy threshold (GeV) for Photoelectric (= 0.0 : ignored)
+ fprintf(pAliceInp,"*\n*Pair production by electrons is activated\n");
+ fprintf(pAliceInp,"*Generated from call: SetProcess('PAIR',1);\n");
fCut = -1.0;
for (j=0; j<iNbOfCut; j++) {
if (strncmp(&sCutFlag[j][0],"CUTGAM",6) == 0) fCut = fCutValue[j];
}
- AliceInp << setiosflags(ios::scientific) << setprecision(5);
- AliceInp << setw(10) << fCut; // energy threshold (GeV) for gamma pair production (< 0.0 : resets to default, = 0.0 : ignored)
- AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
- AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply
- AliceInp << setprecision(2);
- AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply
- AliceInp << setprecision(1);
- AliceInp << setw(10) << 1.0; // step length in assigning indices
- AliceInp << setw(8) << "PHOT-THR";
- AliceInp << endl;
+ // fCut = energy threshold (GeV) for gamma pair production (< 0.0 : resets to default, = 0.0 : ignored)
+ // three = lower bound of the material indices in which the respective thresholds apply
+ // fLastMaterial = upper bound of the material indices in which the respective thresholds apply
+ // one = step length in assigning indices
+ fprintf(pAliceInp,"EMFCUT %f10.1%f10.1%e10.4%f10.1%f10.1%f10.1PHOT-THR\n",zero,zero,fCut,three,fLastMaterial,one);
goto BOTH;
} // end of if for BREM
} // end of loop for BREM
// only pair production by muons and charged hadrons is activated
- AliceInp << "*";
- AliceInp << endl;
- AliceInp << "*Pair production by muons and charged hadrons is activated";
- AliceInp << endl;
- AliceInp << "*Generated from call: SetProcess('PAIR',1) or SetProcess('PAIR',2)";
- AliceInp << endl;
- AliceInp << "*Energy threshold set by call SetCut('PPCUTM',cut) or set to 0.";
- AliceInp << endl;
- AliceInp << setw(10) << "PAIRBREM ";
- AliceInp << setiosflags(ios::scientific) << setprecision(5);
- AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
- AliceInp << setw(10) << 1.0; // pair production by muons and charged hadrons is activated
+ fprintf(pAliceInp,"*\n*Pair production by muons and charged hadrons is activated\n");
+ fprintf(pAliceInp,"*Generated from call: SetProcess('PAIR',1) or SetProcess('PAIR',2)\n");
+ fprintf(pAliceInp,"*Energy threshold set by call SetCut('PPCUTM',cut) or set to 0.\n");
// direct pair production by muons
// G4 particles: "e-", "e+"
// G3 default value: 0.01 GeV
//gMC ->SetCut("PPCUTM",cut); // total energy cut for direct pair prod. by muons
- AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
- AliceInp << setw(10) << 0.0; // e+, e- kinetic energy threshold (in GeV) for explicit pair production.
- AliceInp << setw(10) << 0.0; // no explicit bremsstrahlung production is simulated
- AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply
- AliceInp << setprecision(2);
- AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply
- AliceInp << endl;
+ // one = pair production by muons and charged hadrons is activated
+ // zero = e+, e- kinetic energy threshold (in GeV) for explicit pair production.
+ // zero = no explicit bremsstrahlung production is simulated
+ // three = lower bound of the material indices in which the respective thresholds apply
+ // fLastMaterial = upper bound of the material indices in which the respective thresholds apply
+ fprintf(pAliceInp,"PAIRBREM %f10.1%f10.1%f10.1%f10.1%f10.1\n",one,zero,zero,three,fLastMaterial);
// for e+ and e-
- AliceInp << "*";
- AliceInp << endl;
- AliceInp << "*Pair production by electrons is activated";
- AliceInp << endl;
- AliceInp << "*Generated from call: SetProcess('PAIR',1) or SetProcess('PAIR',2)";
- AliceInp << endl;
- AliceInp << setw(10) << "EMFCUT ";
- AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
- AliceInp << setw(10) << 0.0; // energy threshold (GeV) for Compton scattering (= 0.0 : ignored)
- AliceInp << setw(10) << 0.0; // energy threshold (GeV) for Photoelectric (= 0.0 : ignored)
-
+ fprintf(pAliceInp,"*\n*Pair production by electrons is activated\n");
+ fprintf(pAliceInp,"*Generated from call: SetProcess('PAIR',1) or SetProcess('PAIR',2)\n");
fCut = -1.0;
for (j=0; j<iNbOfCut; j++) {
if (strncmp(&sCutFlag[j][0],"CUTGAM",6) == 0) fCut = fCutValue[j];
}
- AliceInp << setiosflags(ios::scientific) << setprecision(5);
- AliceInp << setw(10) << fCut; // energy threshold (GeV) for gamma pair production (< 0.0 : resets to default, = 0.0 : ignored)
- AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
- AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply
- AliceInp << setprecision(2);
- AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply
- AliceInp << setprecision(1);
- AliceInp << setw(10) << 1.0; // step length in assigning indices
- AliceInp << setw(8) << "PHOT-THR";
- AliceInp << endl;
+ // zero = energy threshold (GeV) for Compton scattering (= 0.0 : ignored)
+ // zero = energy threshold (GeV) for Photoelectric (= 0.0 : ignored)
+ // fCut = energy threshold (GeV) for gamma pair production (< 0.0 : resets to default, = 0.0 : ignored)
+ // three = lower bound of the material indices in which the respective thresholds apply
+ // fLastMaterial = upper bound of the material indices in which the respective thresholds apply
+ // one = step length in assigning indices
+ fprintf(pAliceInp,"EMFCUT %f10.1%f10.1%e10.4%f10.1%f10.1%f10.1PHOT-THR\n",zero,zero,fCut,three,fLastMaterial,one);
BOTH:
k = 0;
if ((strncmp(&sProcessFlag[j][0],"PAIR",4) == 0) && iProcessValue[j] == 1) goto NOBREM;
}
if (iProcessValue[i] == 1 || iProcessValue[i] == 2) {
- AliceInp << "*";
- AliceInp << endl;
- AliceInp << "*Bremsstrahlung by muons and charged hadrons is activated";
- AliceInp << endl;
- AliceInp << "*Generated from call: SetProcess('BREM',1) or SetProcess('BREM',2)";
- AliceInp << endl;
- AliceInp << "*Energy threshold set by call SetCut('BCUTM',cut) or set to 0.";
- AliceInp << endl;
- AliceInp << setw(10) << "PAIRBREM ";
- AliceInp << setiosflags(ios::scientific) << setprecision(5);
- AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
- AliceInp << setw(10) << 2.0; // bremsstrahlung by muons and charged hadrons is activated
- AliceInp << setw(10) << 0.0; // no meaning
+ fprintf(pAliceInp,"*\n*Bremsstrahlung by muons and charged hadrons is activated\n");
+ fprintf(pAliceInp,"*Generated from call: SetProcess('BREM',1) or SetProcess('BREM',2)\n");
+ fprintf(pAliceInp,"*Energy threshold set by call SetCut('BCUTM',cut) or set to 0.\n");
+ // two = bremsstrahlung by muons and charged hadrons is activated
+ // zero = no meaning
// muon and hadron bremsstrahlung
// G4 particles: "gamma"
// G3 default value: CUTGAM=0.001 GeV
for (j=0; j<iNbOfCut; j++) {
if (strncmp(&sCutFlag[j][0],"BCUTM",5) == 0) fCut = fCutValue[j];
}
- AliceInp << setw(10) << fCut; // photon energy threshold (GeV) for explicit bremsstrahlung production
- AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply
- AliceInp << setw(10) << setprecision(2);
- AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply
- AliceInp << endl;
+ // fCut = photon energy threshold (GeV) for explicit bremsstrahlung production
+ // three = lower bound of the material indices in which the respective thresholds apply
+ // fLastMaterial = upper bound of the material indices in which the respective thresholds apply
+ fprintf(pAliceInp,"PAIRBREM %f10.1%f10.1%e10.4%f10.1%f10.1\n",two,zero,fCut,three,fLastMaterial);
// for e+ and e-
- AliceInp << "*";
- AliceInp << endl;
- AliceInp << "*Kinetic energy threshold (GeV) for e+/e- bremsstrahlung - resets to default=0.";
- AliceInp << endl;
- AliceInp << "*Generated from call: SetProcess('BREM',1);";
- AliceInp << endl;
- AliceInp << setw(10) << "EMFCUT ";
- AliceInp << setiosflags(ios::scientific) << setprecision(5);
- AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
- AliceInp << setw(10) << -1.0; // kinetic energy threshold (GeV) for e+/e- bremsstrahlung (resets to default=0)
- AliceInp << setw(10) << 0.0; // not used
- AliceInp << setw(10) << 0.0; // not used
- AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply
- AliceInp << setw(10) << setprecision(2);
- AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply
- AliceInp << setprecision(1);
- AliceInp << setw(10) << 1.0; // step length in assigning indices
- AliceInp << setw(8) << "ELPO-THR";
- AliceInp << endl;
+ fprintf(pAliceInp,"*\n*Kinetic energy threshold (GeV) for e+/e- bremsstrahlung - resets to default=0.\n");
+ fprintf(pAliceInp,"*Generated from call: SetProcess('BREM',1);");
+ // - one = kinetic energy threshold (GeV) for e+/e- bremsstrahlung (resets to default=0)
+ // zero = not used
+ // zero = not used
+ // three = lower bound of the material indices in which the respective thresholds apply
+ // fLastMaterial = upper bound of the material indices in which the respective thresholds apply
+ // one = step length in assigning indices
+ //"ELPO-THR";
+ fprintf(pAliceInp,"EMFCUT %f10.1%f10.1%f10.1%f10.1%f10.1%f10.1ELPO-THR\n",-one,zero,zero,three,fLastMaterial,one);
}
else if (iProcessValue[i] == 0) {
- AliceInp << "*";
- AliceInp << endl;
- AliceInp << "*No bremsstrahlung - no FLUKA card generated";
- AliceInp << endl;
- AliceInp << "*Generated from call: SetProcess('BREM',0)";
- AliceInp << endl;
+ fprintf(pAliceInp,"*\n*No bremsstrahlung - no FLUKA card generated\n");
+ fprintf(pAliceInp,"*Generated from call: SetProcess('BREM',0)\n");
}
else {
- AliceInp << "*";
- AliceInp << endl;
- AliceInp << "*Illegal flag value in SetProcess('BREM',?) call.";
- AliceInp << endl;
- AliceInp << "*No FLUKA card generated";
- AliceInp << endl;
+ fprintf(pAliceInp,"*\n*Illegal flag value in SetProcess('BREM',?) call.\n");
+ fprintf(pAliceInp,"*No FLUKA card generated\n");
}
NOBREM:
j = 0;
//xx gMC ->SetProcess("CKOV",1); // ??? Cerenkov photon generation
else if (strncmp(&sProcessFlag[i][0],"CKOV",4) == 0) {
if (iProcessValue[i] == 1 || iProcessValue[i] == 2) {
- AliceInp << "*";
- AliceInp << endl;
- AliceInp << "*Cerenkov photon generation";
- AliceInp << endl;
- AliceInp << "*Generated from call: SetProcess('CKOV',1) or SetProcess('CKOV',2)";
- AliceInp << endl;
- AliceInp << setw(10) << "OPT-PROD ";
- AliceInp << setiosflags(ios::scientific) << setprecision(5);
- AliceInp << setw(10) << 2.07e-9 ; // minimum Cerenkov photon emission energy (in GeV!). Default: 2.07E-9 GeV (corresponding to 600 nm)
- AliceInp << setw(10) << 4.96e-9; // maximum Cerenkov photon emission energy (in GeV!). Default: 4.96E-9 GeV (corresponding to 250 nm)
- AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
- AliceInp << setw(10) << 0.0; // not used
- AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply
- AliceInp << setprecision(2);
- AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply
- AliceInp << setprecision(1);
- AliceInp << setw(10) << 1.0; // step length in assigning indices
- AliceInp << setw(8) << "CERENKOV";
- AliceInp << endl;
+ fprintf(pAliceInp,"*\n*Cerenkov photon generation\n");
+ fprintf(pAliceInp,"*Generated from call: SetProcess('CKOV',1) or SetProcess('CKOV',2)\n");
+ Double_t emin = 2.07e-9; // minimum Cerenkov photon emission energy (in GeV!). Default: 2.07E-9 GeV (corresponding to 600 nm)
+ Double_t emax = 4.96e-9; // maximum Cerenkov photon emission energy (in GeV!). Default: 4.96E-9 GeV (corresponding to 250 nm)
+ fprintf(pAliceInp,"OPT-PROD %e10.4%e10.4%f10.1%f10.1%f10.1%f10.1CERENKOV\n",emin,emax,zero,three,fLastMaterial,one);
}
else if (iProcessValue[i] == 0) {
- AliceInp << "*";
- AliceInp << endl;
- AliceInp << "*No Cerenkov photon generation";
- AliceInp << endl;
- AliceInp << "*Generated from call: SetProcess('CKOV',0)";
- AliceInp << endl;
- AliceInp << setw(10) << "OPT-PROD ";
- AliceInp << setiosflags(ios::scientific) << setprecision(5);
- AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
- AliceInp << setw(10) << 0.0; // not used
- AliceInp << setw(10) << 0.0; // not used
- AliceInp << setw(10) << 0.0; // not used
- AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply
- AliceInp << setprecision(2);
- AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply
- AliceInp << setprecision(1);
- AliceInp << setw(10) << 1.0; // step length in assigning indices
- AliceInp << setw(8) << "CERE-OFF";
- AliceInp << endl;
+ fprintf(pAliceInp,"*\n*No Cerenkov photon generation\n");
+ fprintf(pAliceInp,"*Generated from call: SetProcess('CKOV',0)\n");
+ // zero = not used
+ // zero = not used
+ // zero = not used
+ // three = lower bound of the material indices in which the respective thresholds apply
+ // fLastMaterial = upper bound of the material indices in which the respective thresholds apply
+ // one = step length in assigning indices
+ //"CERE-OFF";
+ fprintf(pAliceInp,"OPT-PROD %f10.1%f10.1%f10.1%f10.1%f10.1%f10.1CERE-OFF\n",zero,zero,zero,three,fLastMaterial,one);
}
else {
- AliceInp << "*";
- AliceInp << endl;
- AliceInp << "*Illegal flag value in SetProcess('CKOV',?) call.";
- AliceInp << endl;
- AliceInp << "*No FLUKA card generated";
- AliceInp << endl;
+ fprintf(pAliceInp,"*\n*Illegal flag value in SetProcess('CKOV',?) call.\n");
+ fprintf(pAliceInp,"*No FLUKA card generated\n");
}
} // end of else if (strncmp(&sProcessFlag[i][0],"CKOV",4) == 0)
// gMC ->SetProcess("COMP",1); // EMFCUT -1. 0. 0. 3. lastmat 0. PHOT-THR
else if (strncmp(&sProcessFlag[i][0],"COMP",4) == 0) {
if (iProcessValue[i] == 1 || iProcessValue[i] == 2) {
- AliceInp << "*";
- AliceInp << endl;
- AliceInp << "*Energy threshold (GeV) for Compton scattering - resets to default=0.";
- AliceInp << endl;
- AliceInp << "*Generated from call: SetProcess('COMP',1);";
- AliceInp << endl;
- AliceInp << setw(10) << "EMFCUT ";
- AliceInp << setiosflags(ios::scientific) << setprecision(5);
- AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
- AliceInp << setw(10) << -1.0; // energy threshold (GeV) for Compton scattering - resets to default=0.
- AliceInp << setw(10) << 0.0; // not used
- AliceInp << setw(10) << 0.0; // not used
- AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply
- AliceInp << setprecision(2);
- AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply
- AliceInp << setprecision(1);
- AliceInp << setw(10) << 1.0; // step length in assigning indices
- AliceInp << setw(8) << "PHOT-THR";
- AliceInp << endl;
+ fprintf(pAliceInp,"*\n*Energy threshold (GeV) for Compton scattering - resets to default=0.\n");
+ fprintf(pAliceInp,"*Generated from call: SetProcess('COMP',1);\n");
+ // - one = energy threshold (GeV) for Compton scattering - resets to default=0.
+ // zero = not used
+ // zero = not used
+ // three = lower bound of the material indices in which the respective thresholds apply
+ // fLastMaterial = upper bound of the material indices in which the respective thresholds apply
+ // one = step length in assigning indices
+ //"PHOT-THR";
+ fprintf(pAliceInp,"EMFCUT %f10.1%f10.1%f10.1%f10.1%f10.1%f10.1PHOT-THR\n",-one,zero,zero,three,fLastMaterial,one);
}
else if (iProcessValue[i] == 0) {
- AliceInp << "*";
- AliceInp << endl;
- AliceInp << "*No Compton scattering - no FLUKA card generated";
- AliceInp << endl;
- AliceInp << "*Generated from call: SetProcess('COMP',0)";
- AliceInp << endl;
+ fprintf(pAliceInp,"*\n*No Compton scattering - no FLUKA card generated\n");
+ fprintf(pAliceInp,"*Generated from call: SetProcess('COMP',0)\n");
}
else {
- AliceInp << "*";
- AliceInp << endl;
- AliceInp << "*Illegal flag value in SetProcess('COMP',?) call.";
- AliceInp << endl;
- AliceInp << "*No FLUKA card generated";
- AliceInp << endl;
+ fprintf(pAliceInp,"*\n*Illegal flag value in SetProcess('COMP',?) call.\n");
+ fprintf(pAliceInp,"*No FLUKA card generated\n");
}
} // end of else if (strncmp(&sProcessFlag[i][0],"COMP",4) == 0)
// gMC ->SetProcess("DRAY",0); // DELTARAY 1.E+6 0. 0. 3. lastmat 0.
else if (strncmp(&sProcessFlag[i][0],"DRAY",4) == 0) {
if (iProcessValue[i] == 0 || iProcessValue[i] == 4) {
- AliceInp << "*";
- AliceInp << endl;
- AliceInp << "*Kinetic energy threshold (GeV) for delta ray production";
- AliceInp << endl;
- AliceInp << "*Generated from call: SetProcess('DRAY',0) or SetProcess('DRAY',4)";
- AliceInp << endl;
- AliceInp << "*No delta ray production by muons - threshold set artificially high";
- AliceInp << endl;
- AliceInp << setw(10) << "DELTARAY ";
- AliceInp << setiosflags(ios::scientific) << setprecision(5);
- AliceInp << setw(10) << 1.0e+6; // kinetic energy threshold (GeV) for delta ray production (discrete energy transfer)
- AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
- AliceInp << setw(10) << 0.0; // ignored
- AliceInp << setw(10) << 0.0; // ignored
- AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply
- AliceInp << setw(10) << setprecision(2);
- AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply
- AliceInp << setprecision(1);
- AliceInp << setw(10) << 1.0; // step length in assigning indices
- AliceInp << endl;
+ fprintf(pAliceInp,"*\n*Kinetic energy threshold (GeV) for delta ray production\n");
+ fprintf(pAliceInp,"*Generated from call: SetProcess('DRAY',0) or SetProcess('DRAY',4)\n");
+ fprintf(pAliceInp,"*No delta ray production by muons - threshold set artificially high\n");
+ Double_t emin = 1.0e+6; // kinetic energy threshold (GeV) for delta ray production (discrete energy transfer)
+ // zero = ignored
+ // zero = ignored
+ // three = lower bound of the material indices in which the respective thresholds apply
+ // fLastMaterial = upper bound of the material indices in which the respective thresholds apply
+ // one = step length in assigning indices
+ fprintf(pAliceInp,"DELTARAY %e10.4%f10.1%f10.1%f10.1%f10.1%f10.1\n",emin,zero,zero,three,fLastMaterial,one);
}
else if (iProcessValue[i] == 1 || iProcessValue[i] == 2 || iProcessValue[i] == 3) {
- AliceInp << "*";
- AliceInp << endl;
- AliceInp << "*Kinetic energy threshold (GeV) for delta ray production";
- AliceInp << endl;
- AliceInp << "*Generated from call: SetProcess('DRAY',flag), flag=1,2,3";
- AliceInp << endl;
- AliceInp << "*Delta ray production by muons switched on";
- AliceInp << endl;
- AliceInp << "*Energy threshold set by call SetCut('DCUTM',cut) or set to 0.";
- AliceInp << endl;
- AliceInp << setw(10) << "DELTARAY ";
- AliceInp << setiosflags(ios::scientific) << setprecision(5);
+ fprintf(pAliceInp,"*\n*Kinetic energy threshold (GeV) for delta ray production\n");
+ fprintf(pAliceInp,"*Generated from call: SetProcess('DRAY',flag), flag=1,2,3\n");
+ fprintf(pAliceInp,"*Delta ray production by muons switched on\n");
+ fprintf(pAliceInp,"*Energy threshold set by call SetCut('DCUTM',cut) or set to 1.0e+6.\n");
fCut = 1.0e+6;
for (j=0; j<iNbOfCut; j++) {
if (strncmp(&sCutFlag[j][0],"DCUTM",5) == 0) fCut = fCutValue[j];
}
- AliceInp << setw(10) << fCut; // kinetic energy threshold (GeV) for delta ray production (discrete energy transfer)
- AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
- AliceInp << setw(10) << 0.0; // ignored
- AliceInp << setw(10) << 0.0; // ignored
- AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply
- AliceInp << setw(10) << setprecision(2);
- AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply
- AliceInp << setprecision(1);
- AliceInp << setw(10) << 1.0; // step length in assigning indices
- AliceInp << endl;
+ // fCut = kinetic energy threshold (GeV) for delta ray production (discrete energy transfer)
+ // zero = ignored
+ // zero = ignored
+ // three = lower bound of the material indices in which the respective thresholds apply
+ // fLastMaterial = upper bound of the material indices in which the respective thresholds apply
+ // one = step length in assigning indices
+ fprintf(pAliceInp,"DELTARAY %e10.4%f10.1%f10.1%f10.1%f10.1%f10.1\n",fCut,zero,zero,three,fLastMaterial,one);
}
else {
- AliceInp << "*";
- AliceInp << endl;
- AliceInp << "*Illegal flag value in SetProcess('DRAY',?) call.";
- AliceInp << endl;
- AliceInp << "*No FLUKA card generated";
- AliceInp << endl;
+ fprintf(pAliceInp,"*\n*Illegal flag value in SetProcess('DRAY',?) call.\n");
+ fprintf(pAliceInp,"*No FLUKA card generated\n");
}
} // end of else if (strncmp(&sProcessFlag[i][0],"DRAY",4) == 0)
//Select pure GEANH (HADR 1) or GEANH/NUCRIN (HADR 3) ?????
else if (strncmp(&sProcessFlag[i][0],"HADR",4) == 0) {
if (iProcessValue[i] == 1 || iProcessValue[i] == 2) {
- AliceInp << "*";
- AliceInp << endl;
- AliceInp << "*Hadronic interaction is ON by default in FLUKA";
- AliceInp << endl;
- AliceInp << "*No FLUKA card generated";
- AliceInp << endl;
+ fprintf(pAliceInp,"*\n*Hadronic interaction is ON by default in FLUKA\n");
+ fprintf(pAliceInp,"*No FLUKA card generated\n");
}
else if (iProcessValue[i] == 0) {
- AliceInp << "*";
- AliceInp << endl;
- AliceInp << "*Hadronic interaction is set OFF";
- AliceInp << endl;
- AliceInp << "*Generated from call: SetProcess('HADR',0);";
- AliceInp << endl;
- AliceInp << setw(10) << "MULSOPT ";
- AliceInp << setiosflags(ios::scientific) << setprecision(5);
- AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
- AliceInp << setw(10) << 0.0; // ignored
- AliceInp << setw(10) << 3.0; // multiple scattering for hadrons and muons is completely suppressed
- AliceInp << setw(10) << 0.0; // no spin-relativistic corrections
- AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply
- AliceInp << setprecision(2);
- AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply
- AliceInp << endl;
+ fprintf(pAliceInp,"*\n*Hadronic interaction is set OFF\n");
+ fprintf(pAliceInp,"*Generated from call: SetProcess('HADR',0);\n");
+ // zero = ignored
+ // three = multiple scattering for hadrons and muons is completely suppressed
+ // zero = no spin-relativistic corrections
+ // three = lower bound of the material indices in which the respective thresholds apply
+ // fLastMaterial = upper bound of the material indices in which the respective thresholds apply
+ fprintf(pAliceInp,"MULSOPT %f10.1%f10.1%f10.1%f10.1%f10.1\n",zero,three,zero,three,fLastMaterial);
}
else {
- AliceInp << "*";
- AliceInp << endl;
- AliceInp << "*Illegal flag value in SetProcess('HADR',?) call.";
- AliceInp << endl;
- AliceInp << "*No FLUKA card generated";
- AliceInp << endl;
+ fprintf(pAliceInp,"*\n*Illegal flag value in SetProcess('HADR',?) call.\n");
+ fprintf(pAliceInp,"*No FLUKA card generated\n");
}
} // end of else if (strncmp(&sProcessFlag[i][0],"HADR",4) == 0)
// gMC ->SetProcess("LOSS",2); // ??? IONFLUCT ? energy loss
else if (strncmp(&sProcessFlag[i][0],"LOSS",4) == 0) {
if (iProcessValue[i] == 2) { // complete energy loss fluctuations
- AliceInp << "*";
- AliceInp << endl;
- AliceInp << "*Complete energy loss fluctuations do not exist in FLUKA";
- AliceInp << endl;
- AliceInp << "*Generated from call: SetProcess('LOSS',2);";
- AliceInp << endl;
- AliceInp << "*flag=2=complete energy loss fluctuations";
- AliceInp << endl;
- AliceInp << "*No input card generated";
- AliceInp << endl;
+ fprintf(pAliceInp,"*\n*Complete energy loss fluctuations do not exist in FLUKA\n");
+ fprintf(pAliceInp,"*Generated from call: SetProcess('LOSS',2);\n");
+ fprintf(pAliceInp,"*flag=2=complete energy loss fluctuations\n");
+ fprintf(pAliceInp,"*No FLUKA card generated\n");
}
else if (iProcessValue[i] == 1 || iProcessValue[i] == 3) { // restricted energy loss fluctuations
- AliceInp << "*";
- AliceInp << endl;
- AliceInp << "*Restricted energy loss fluctuations";
- AliceInp << endl;
- AliceInp << "*Generated from call: SetProcess('LOSS',1) or SetProcess('LOSS',3)";
- AliceInp << endl;
- AliceInp << setw(10) << "IONFLUCT ";
- AliceInp << setiosflags(ios::scientific) << setprecision(5);
- AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
- AliceInp << setw(10) << 1.0; // restricted energy loss fluctuations (for hadrons and muons) switched on
- AliceInp << setw(10) << 1.0; // restricted energy loss fluctuations (for e+ and e-) switched on
- AliceInp << setw(10) << 1.0; // minimal accuracy
- AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply
- AliceInp << setprecision(2);
- AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply
- AliceInp << endl;
+ fprintf(pAliceInp,"*\n*Restricted energy loss fluctuations\n");
+ fprintf(pAliceInp,"*Generated from call: SetProcess('LOSS',1) or SetProcess('LOSS',3)\n");
+ // one = restricted energy loss fluctuations (for hadrons and muons) switched on
+ // one = restricted energy loss fluctuations (for e+ and e-) switched on
+ // one = minimal accuracy
+ // three = lower bound of the material indices in which the respective thresholds apply
+ // upper bound of the material indices in which the respective thresholds apply
+ fprintf(pAliceInp,"IONFLUCT %f10.1%f10.1%f10.1%f10.1%f10.1\n",one,one,one,three,fLastMaterial);
}
else if (iProcessValue[i] == 4) { // no energy loss fluctuations
- AliceInp << "*";
- AliceInp << endl;
- AliceInp << "*No energy loss fluctuations";
- AliceInp << endl;
- AliceInp << "*Generated from call: SetProcess('LOSS',4)";
- AliceInp << endl;
- AliceInp << setw(10) << -1.0; // restricted energy loss fluctuations (for hadrons and muons) switched off
- AliceInp << setw(10) << -1.0; // restricted energy loss fluctuations (for e+ and e-) switched off
- AliceInp << setw(10) << 1.0; // minimal accuracy
- AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply
- AliceInp << setprecision(2);
- AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply
- AliceInp << endl;
+ fprintf(pAliceInp,"*\n*No energy loss fluctuations\n");
+ fprintf(pAliceInp,"*\n*Generated from call: SetProcess('LOSS',4)\n");
+ // - one = restricted energy loss fluctuations (for hadrons and muons) switched off
+ // - one = restricted energy loss fluctuations (for e+ and e-) switched off
+ // one = minimal accuracy
+ // three = lower bound of the material indices in which the respective thresholds apply
+ // fLastMaterial = upper bound of the material indices in which the respective thresholds apply
+ fprintf(pAliceInp,"IONFLUCT %f10.1%f10.1%f10.1%f10.1%f10.1\n",-one,-one,one,three,fLastMaterial);
}
else {
- AliceInp << "*";
- AliceInp << endl;
- AliceInp << "*Illegal flag value in SetProcess('LOSS',?) call.";
- AliceInp << endl;
- AliceInp << "*No FLUKA card generated";
- AliceInp << endl;
+ fprintf(pAliceInp,"*\n*Illegal flag value in SetProcess('LOSS',?) call.\n");
+ fprintf(pAliceInp,"*No FLUKA card generated\n");
}
} // end of else if (strncmp(&sProcessFlag[i][0],"LOSS",4) == 0)
// gMC ->SetProcess("MULS",1); // MULSOPT multiple scattering
else if (strncmp(&sProcessFlag[i][0],"MULS",4) == 0) {
if (iProcessValue[i] == 1 || iProcessValue[i] == 2 || iProcessValue[i] == 3) {
- AliceInp << "*";
- AliceInp << endl;
- AliceInp << "*Multiple scattering is ON by default for e+e- and for hadrons/muons";
- AliceInp << endl;
- AliceInp << "*No FLUKA card generated";
- AliceInp << endl;
+ fprintf(pAliceInp,"*\n*Multiple scattering is ON by default for e+e- and for hadrons/muons\n");
+ fprintf(pAliceInp,"*No FLUKA card generated\n");
}
else if (iProcessValue[i] == 0) {
- AliceInp << "*";
- AliceInp << endl;
- AliceInp << "*Multiple scattering is set OFF";
- AliceInp << endl;
- AliceInp << "*Generated from call: SetProcess('MULS',0);";
- AliceInp << endl;
- AliceInp << setw(10) << "MULSOPT ";
- AliceInp << setiosflags(ios::scientific) << setprecision(5);
- AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
- AliceInp << setw(10) << 0.0; // ignored
- AliceInp << setw(10) << 3.0; // multiple scattering for hadrons and muons is completely suppressed
- AliceInp << setw(10) << 3.0; // multiple scattering for e+ and e- is completely suppressed
- AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply
- AliceInp << setprecision(2);
- AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply
- AliceInp << endl;
+ fprintf(pAliceInp,"*\n*Multiple scattering is set OFF\n");
+ fprintf(pAliceInp,"*Generated from call: SetProcess('MULS',0);\n");
+ // zero = ignored
+ // three = multiple scattering for hadrons and muons is completely suppressed
+ // three = multiple scattering for e+ and e- is completely suppressed
+ // three = lower bound of the material indices in which the respective thresholds apply
+ // fLastMaterial = upper bound of the material indices in which the respective thresholds apply
+ fprintf(pAliceInp,"MULSOPT %f10.1%f10.1%f10.1%f10.1%f10.1\n",zero,three,three,three,fLastMaterial);
}
else {
- AliceInp << "*";
- AliceInp << endl;
- AliceInp << "*Illegal flag value in SetProcess('MULS',?) call.";
- AliceInp << endl;
- AliceInp << "*No FLUKA card generated";
- AliceInp << endl;
+ fprintf(pAliceInp,"*\n*Illegal flag value in SetProcess('MULS',?) call.\n");
+ fprintf(pAliceInp,"*No FLUKA card generated\n");
}
} // end of else if (strncmp(&sProcessFlag[i][0],"MULS",4) == 0)
// gMC ->SetProcess("MUNU",1); // MUPHOTON 1. 0. 0. 3. lastmat
else if (strncmp(&sProcessFlag[i][0],"MUNU",4) == 0) {
if (iProcessValue[i] == 1) {
- AliceInp << "*";
- AliceInp << endl;
- AliceInp << "*Muon nuclear interactions with production of secondary hadrons";
- AliceInp << endl;
- AliceInp << "*Generated from call: SetProcess('MUNU',1);";
- AliceInp << endl;
- AliceInp << setw(10) << "MUPHOTON ";
- AliceInp << setiosflags(ios::scientific) << setprecision(5);
- AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
- AliceInp << setw(10) << 1.0; // full simulation of muon nuclear interactions and production of secondary hadrons
- AliceInp << setw(10) << 0.0; // ratio of longitudinal to transverse virtual photon cross-section - Default = 0.25.
- AliceInp << setw(10) << 0.0; // fraction of rho-like interactions ( must be < 1) - Default = 0.75.
- AliceInp << setprecision(1);
- AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply
- AliceInp << setprecision(2);
- AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply
- AliceInp << endl;
+ fprintf(pAliceInp,"*\n*Muon nuclear interactions with production of secondary hadrons\n");
+ fprintf(pAliceInp,"*\n*Generated from call: SetProcess('MUNU',1);\n");
+ // one = full simulation of muon nuclear interactions and production of secondary hadrons
+ // zero = ratio of longitudinal to transverse virtual photon cross-section - Default = 0.25.
+ // zero = fraction of rho-like interactions ( must be < 1) - Default = 0.75.
+ // three = lower bound of the material indices in which the respective thresholds apply
+ // fLastMaterial = upper bound of the material indices in which the respective thresholds apply
+ fprintf(pAliceInp,"MUPHOTON %f10.1%f10.1%f10.1%f10.1%f10.1\n",one,zero,zero,three,fLastMaterial);
}
else if (iProcessValue[i] == 2) {
- AliceInp << "*";
- AliceInp << endl;
- AliceInp << "*Muon nuclear interactions without production of secondary hadrons";
- AliceInp << endl;
- AliceInp << "*Generated from call: SetProcess('MUNU',2);";
- AliceInp << endl;
- AliceInp << setw(10) << "MUPHOTON ";
- AliceInp << setiosflags(ios::scientific) << setprecision(5);
- AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
- AliceInp << setw(10) << 2.0; // full simulation of muon nuclear interactions and production of secondary hadrons
- AliceInp << setw(10) << 0.0; // ratio of longitudinal to transverse virtual photon cross-section - Default = 0.25.
- AliceInp << setw(10) << 0.0; // fraction of rho-like interactions ( must be < 1) - Default = 0.75.
- AliceInp << setprecision(1);
- AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply
- AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply
- AliceInp << endl;
+ fprintf(pAliceInp,"*\n*Muon nuclear interactions without production of secondary hadrons\n");
+ fprintf(pAliceInp,"*Generated from call: SetProcess('MUNU',2);\n");
+ // two = full simulation of muon nuclear interactions and production of secondary hadrons
+ // zero = ratio of longitudinal to transverse virtual photon cross-section - Default = 0.25.
+ // zero = fraction of rho-like interactions ( must be < 1) - Default = 0.75.
+ // three = lower bound of the material indices in which the respective thresholds apply
+ // fLastMaterial = upper bound of the material indices in which the respective thresholds apply
+ fprintf(pAliceInp,"MUPHOTON %f10.1%f10.1%f10.1%f10.1%f10.1\n",two,zero,zero,three,fLastMaterial);
}
else if (iProcessValue[i] == 0) {
- AliceInp << "*";
- AliceInp << endl;
- AliceInp << "*No muon nuclear interaction - no FLUKA card generated";
- AliceInp << endl;
- AliceInp << "*Generated from call: SetProcess('MUNU',0)";
- AliceInp << endl;
+ fprintf(pAliceInp,"*\n*No muon nuclear interaction - no FLUKA card generated\n");
+ fprintf(pAliceInp,"*Generated from call: SetProcess('MUNU',0)\n");
}
else {
- AliceInp << "*";
- AliceInp << endl;
- AliceInp << "*Illegal flag value in SetProcess('MUNU',?) call.";
- AliceInp << endl;
- AliceInp << "*No FLUKA card generated";
- AliceInp << endl;
+ fprintf(pAliceInp,"*\n*Illegal flag value in SetProcess('MUNU',?) call.\n");
+ fprintf(pAliceInp,"*No FLUKA card generated\n");
}
} // end of else if (strncmp(&sProcessFlag[i][0],"MUNU",4) == 0)
// flag = 2 photon fission, no secondaries stored
else if (strncmp(&sProcessFlag[i][0],"PFIS",4) == 0) {
if (iProcessValue[i] == 0) {
- AliceInp << "*";
- AliceInp << endl;
- AliceInp << "*No photonuclear interactions";
- AliceInp << endl;
- AliceInp << "*Generated from call: SetProcess('PFIS',0);";
- AliceInp << endl;
- AliceInp << setw(10) << "PHOTONUC ";
- AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
- AliceInp << setw(10) << -1.0; // no photonuclear interactions
- AliceInp << setw(10) << 0.0; // not used
- AliceInp << setw(10) << 0.0; // not used
- AliceInp << setw(10) << 3.0; // upper bound of the material indices in which the respective thresholds apply
- AliceInp << setprecision(2);
- AliceInp << setw(10) << fLastMaterial;
- AliceInp << setprecision(1); // upper bound of the material indices in which the respective thresholds apply
- AliceInp << setprecision(1);
- AliceInp << setw(10) << 1.0; // step length in assigning indices
- AliceInp << endl;
+ fprintf(pAliceInp,"*\n*No photonuclear interactions\n");
+ fprintf(pAliceInp,"*Generated from call: SetProcess('PFIS',0);\n");
+ // - one = no photonuclear interactions
+ // zero = not used
+ // zero = not used
+ // three = lower bound of the material indices in which the respective thresholds apply
+ // fLastMaterial = upper bound of the material indices in which the respective thresholds apply
+ fprintf(pAliceInp,"PHOTONUC %f10.1%f10.1%f10.1%f10.1%f10.1\n",-one,zero,zero,three,fLastMaterial);
}
else if (iProcessValue[i] == 1) {
- AliceInp << "*";
- AliceInp << endl;
- AliceInp << "*Photon nuclear interactions are activated at all energies";
- AliceInp << endl;
- AliceInp << "*Generated from call: SetProcess('PFIS',1);";
- AliceInp << endl;
- AliceInp << setw(10) << "PHOTONUC ";
- AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
- AliceInp << setw(10) << 1.0; // photonuclear interactions are activated at all energies
- AliceInp << setw(10) << 0.0; // not used
- AliceInp << setw(10) << 0.0; // not used
- AliceInp << setprecision(2);
- AliceInp << setw(10) << 3.0; // upper bound of the material indices in which the respective thresholds apply
- AliceInp << setw(10) << fLastMaterial;
- AliceInp << setprecision(1); // upper bound of the material indices in which the respective thresholds apply
- AliceInp << setprecision(1);
- AliceInp << setw(10) << 1.0; // step length in assigning indices
- AliceInp << endl;
+ fprintf(pAliceInp,"*\n*Photon nuclear interactions are activated at all energies\n");
+ fprintf(pAliceInp,"*Generated from call: SetProcess('PFIS',1);\n");
+ // one = photonuclear interactions are activated at all energies
+ // zero = not used
+ // zero = not used
+ // three = lower bound of the material indices in which the respective thresholds apply
+ // fLastMaterial = upper bound of the material indices in which the respective thresholds apply
+ fprintf(pAliceInp,"PHOTONUC %f10.1%f10.1%f10.1%f10.1%f10.1\n",one,zero,zero,three,fLastMaterial);
}
else if (iProcessValue[i] == 0) {
- AliceInp << "*";
- AliceInp << endl;
- AliceInp << "*No photofission - no FLUKA card generated";
- AliceInp << endl;
- AliceInp << "*Generated from call: SetProcess('PFIS',0)";
- AliceInp << endl;
+ fprintf(pAliceInp,"*\n*No photofission - no FLUKA card generated\n");
+ fprintf(pAliceInp,"*Generated from call: SetProcess('PFIS',0)\n");
}
else {
- AliceInp << "*";
- AliceInp << endl;
- AliceInp << "*Illegal flag value in SetProcess('PFIS',?) call.";
- AliceInp << endl;
- AliceInp << "*No FLUKA card generated";
- AliceInp << endl;
+ fprintf(pAliceInp,"*\n*Illegal flag value in SetProcess('PFIS',?) call.\n");
+ fprintf(pAliceInp,"*No FLUKA card generated\n");
}
}
// gMC ->SetProcess("PHOT",1); // EMFCUT 0. -1. 0. 3. lastmat 0. PHOT-THR
else if (strncmp(&sProcessFlag[i][0],"PHOT",4) == 0) {
if (iProcessValue[i] == 1 || iProcessValue[i] == 2) {
- AliceInp << "*";
- AliceInp << endl;
- AliceInp << "*Photo electric effect is activated";
- AliceInp << endl;
- AliceInp << "*Generated from call: SetProcess('PHOT',1);";
- AliceInp << endl;
- AliceInp << setw(10) << "EMFCUT ";
- AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
- AliceInp << setw(10) << 0.0; // ignored
- AliceInp << setw(10) << -1.0; // resets to default=0.
- AliceInp << setw(10) << 0.0; // ignored
- AliceInp << setw(10) << 3.0; // upper bound of the material indices in which the respective thresholds apply
- AliceInp << setprecision(2);
- AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply
- AliceInp << setprecision(1);
- AliceInp << setw(10) << 1.0; // step length in assigning indices
- AliceInp << setw(8) << "PHOT-THR";
- AliceInp << endl;
+ fprintf(pAliceInp,"*\n*Photo electric effect is activated\n");
+ fprintf(pAliceInp,"*Generated from call: SetProcess('PHOT',1);\n");
+ // zero = ignored
+ // - one = resets to default=0.
+ // zero = ignored
+ // three = lower bound of the material indices in which the respective thresholds apply
+ // fLastMaterial = upper bound of the material indices in which the respective thresholds apply
+ // one = step length in assigning indices
+ //"PHOT-THR";
+ fprintf(pAliceInp,"EMFCUT %f10.1%f10.1%f10.1%f10.1%f10.1%f10.1PHOT-THR\n",zero,-one,zero,three,fLastMaterial,one);
}
else if (iProcessValue[i] == 0) {
- AliceInp << "*";
- AliceInp << endl;
- AliceInp << "*No photo electric effect - no FLUKA card generated";
- AliceInp << endl;
- AliceInp << "*Generated from call: SetProcess('PHOT',0)";
- AliceInp << endl;
+ fprintf(pAliceInp,"*\n*No photo electric effect - no FLUKA card generated\n");
+ fprintf(pAliceInp,"*Generated from call: SetProcess('PHOT',0)\n");
}
else {
- AliceInp << "*";
- AliceInp << endl;
- AliceInp << "*Illegal flag value in SetProcess('PHOT',?) call.";
- AliceInp << endl;
- AliceInp << "*No FLUKA card generated";
- AliceInp << endl;
+ fprintf(pAliceInp,"*\n*Illegal flag value in SetProcess('PHOT',?) call.\n");
+ fprintf(pAliceInp,"*No FLUKA card generated\n");
}
} // else if (strncmp(&sProcessFlag[i][0],"PHOT",4) == 0)
//xx gMC ->SetProcess("RAYL",1);
else if (strncmp(&sProcessFlag[i][0],"RAYL",4) == 0) {
if (iProcessValue[i] == 1) {
- AliceInp << "*";
- AliceInp << endl;
- AliceInp << "*Rayleigh scattering is ON by default in FLUKA";
- AliceInp << endl;
- AliceInp << "*No FLUKA card generated";
- AliceInp << endl;
+ fprintf(pAliceInp,"*\n*Rayleigh scattering is ON by default in FLUKA\n");
+ fprintf(pAliceInp,"*No FLUKA card generated\n");
}
else if (iProcessValue[i] == 0) {
- AliceInp << "*";
- AliceInp << endl;
- AliceInp << "*Rayleigh scattering is set OFF";
- AliceInp << endl;
- AliceInp << "*Generated from call: SetProcess('RAYL',0);";
- AliceInp << endl;
- AliceInp << setw(10) << "EMFRAY ";
- AliceInp << setiosflags(ios::scientific) << setprecision(5);
- AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
- AliceInp << setw(10) << -1.0; // no Rayleigh scattering and no binding corrections for Compton
- AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply
- AliceInp << setprecision(2);
- AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply
- AliceInp << endl;
+ fprintf(pAliceInp,"*\n*Rayleigh scattering is set OFF\n");
+ fprintf(pAliceInp,"*Generated from call: SetProcess('RAYL',0);\n");
+ // - one = no Rayleigh scattering and no binding corrections for Compton
+ // three = lower bound of the material indices in which the respective thresholds apply
+ // fLastMaterial = upper bound of the material indices in which the respective thresholds apply
+ fprintf(pAliceInp,"EMFRAY %f10.1%f10.1%f10.1%f10.1\n",-one,three,three,fLastMaterial);
}
else {
- AliceInp << "*";
- AliceInp << endl;
- AliceInp << "*Illegal flag value in SetProcess('RAYL',?) call.";
- AliceInp << endl;
- AliceInp << "*No FLUKA card generated";
- AliceInp << endl;
+ fprintf(pAliceInp,"*\n*Illegal flag value in SetProcess('RAYL',?) call.\n");
+ fprintf(pAliceInp,"*No FLUKA card generated\n");
}
} // end of else if (strncmp(&sProcessFlag[i][0],"RAYL",4) == 0)
// flag = 1 synchrotron radiation
//xx gMC ->SetProcess("SYNC",1); // synchrotron radiation generation
else if (strncmp(&sProcessFlag[i][0],"SYNC",4) == 0) {
- AliceInp << "*";
- AliceInp << endl;
- AliceInp << "*Synchrotron radiation generation is NOT implemented in FLUKA";
- AliceInp << endl;
- AliceInp << "*No FLUKA card generated";
- AliceInp << endl;
+ fprintf(pAliceInp,"*\n*Synchrotron radiation generation is NOT implemented in FLUKA\n");
+ fprintf(pAliceInp,"*No FLUKA card generated\n");
}
// flag = 1 automatic calculation
//xx gMC ->SetProcess("AUTO",1); // ??? automatic computation of the tracking medium parameters
else if (strncmp(&sProcessFlag[i][0],"AUTO",4) == 0) {
- AliceInp << "*";
- AliceInp << endl;
- AliceInp << "*Automatic calculation of tracking medium parameters is always ON in FLUKA";
- AliceInp << endl;
- AliceInp << "*No FLUKA card generated";
- AliceInp << endl;
+ fprintf(pAliceInp,"*\n*Automatic calculation of tracking medium parameters is always ON in FLUKA\n");
+ fprintf(pAliceInp,"*No FLUKA card generated\n");
}
//xx gMC ->SetProcess("STRA",1); // ??? energy fluctuation model
else if (strncmp(&sProcessFlag[i][0],"STRA",4) == 0) {
if (iProcessValue[i] == 0 || iProcessValue[i] == 2 || iProcessValue[i] == 3) {
- AliceInp << "*";
- AliceInp << endl;
- AliceInp << "*Ionization energy losses calculation is activated";
- AliceInp << endl;
- AliceInp << "*Generated from call: SetProcess('STRA',n);, n=0,1,2";
- AliceInp << endl;
- AliceInp << setw(10) << "IONFLUCT ";
- AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
- AliceInp << setw(10) << 1.0; // restricted energy loss fluctuations
- // (for hadrons and muons) switched on
- AliceInp << setw(10) << 1.0; // restricted energy loss fluctuations
- // (for e+ and e-) switched on
- AliceInp << setw(10) << 1.0; // minimal accuracy
- AliceInp << setw(10) << 3.0; // upper bound of the material indices in
- // which the respective thresholds apply
- AliceInp << setprecision(2);
- AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply
- AliceInp << setprecision(1);
- AliceInp << setw(10) << 1.0; // step length in assigning indices
- AliceInp << endl;
+ fprintf(pAliceInp,"*\n*Ionization energy losses calculation is activated\n");
+ fprintf(pAliceInp,"*Generated from call: SetProcess('STRA',n);, n=0,1,2\n");
+ // one = restricted energy loss fluctuations (for hadrons and muons) switched on
+ // one = restricted energy loss fluctuations (for e+ and e-) switched on
+ // one = minimal accuracy
+ // three = lower bound of the material indices in which the respective thresholds apply
+ // fLastMaterial = upper bound of the material indices in which the respective thresholds apply
+ fprintf(pAliceInp,"IONFLUCT %f10.1%f10.1%f10.1%f10.1%f10.1\n",one,one,one,three,fLastMaterial);
}
else {
- AliceInp << "*";
- AliceInp << endl;
- AliceInp << "*Illegal flag value in SetProcess('STRA',?) call.";
- AliceInp << endl;
- AliceInp << "*No FLUKA card generated";
- AliceInp << endl;
+ fprintf(pAliceInp,"*\n*Illegal flag value in SetProcess('STRA',?) call.\n");
+ fprintf(pAliceInp,"*No FLUKA card generated\n");
}
} // else if (strncmp(&sProcessFlag[i][0],"STRA",4) == 0)
// G3 default value: 0.001 GeV
//gMC ->SetCut("CUTGAM",cut); // cut for gammas
else if (strncmp(&sCutFlag[i][0],"CUTGAM",6) == 0) {
- AliceInp << "*";
- AliceInp << endl;
- AliceInp << "*Cut for gamma";
- AliceInp << endl;
- AliceInp << "*Generated from call: SetCut('CUTGAM',cut);";
- AliceInp << endl;
- AliceInp << setw(10) << "PART-THR ";
- AliceInp << setiosflags(ios::scientific) << setprecision(5);
- AliceInp << setw(10) << -fCutValue[i];
- AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
- AliceInp << setw(10) << 7.0;
- AliceInp << endl;
+ fprintf(pAliceInp,"*\n*Cut for gamma\n");
+ fprintf(pAliceInp,"*Generated from call: SetCut('CUTGAM',cut);\n");
+ // -fCutValue[i];
+ // 7.0 = lower bound of the particle id-numbers to which the cut-off
+ fprintf(pAliceInp,"PART-THR %e10.4%f10.1\n",-fCutValue[i],7.0);
}
// electrons
// G3 default value: 0.001 GeV
//gMC ->SetCut("CUTELE",cut); // cut for e+,e-
else if (strncmp(&sCutFlag[i][0],"CUTELE",6) == 0) {
- AliceInp << "*";
- AliceInp << endl;
- AliceInp << "*Cut for electrons";
- AliceInp << endl;
- AliceInp << "*Generated from call: SetCut('CUTELE',cut);";
- AliceInp << endl;
- AliceInp << setw(10) << "PART-THR ";
- AliceInp << setiosflags(ios::scientific) << setprecision(5);
- AliceInp << setw(10) << -fCutValue[i];
- AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
- AliceInp << setw(10) << 3.0;
- AliceInp << setw(10) << 4.0;
- AliceInp << setw(10) << 1.0;
- AliceInp << endl;
+ fprintf(pAliceInp,"*\n*Cut for electrons\n");
+ fprintf(pAliceInp,"*Generated from call: SetCut('CUTELE',cut);\n");
+ // -fCutValue[i];
+ // three = lower bound of the particle id-numbers to which the cut-off
+ // 4.0 = upper bound of the particle id-numbers to which the cut-off
+ // one = step length in assigning numbers
+ fprintf(pAliceInp,"PART-THR %e10.4%f10.1%f10.1%f10.1\n",-fCutValue[i],three,4.0,one);
}
// neutral hadrons
// G3 default value: 0.01 GeV
//gMC ->SetCut("CUTNEU",cut); // cut for neutral hadrons
else if (strncmp(&sCutFlag[i][0],"CUTNEU",6) == 0) {
- AliceInp << "*";
- AliceInp << endl;
- AliceInp << "*Cut for neutral hadrons";
- AliceInp << endl;
- AliceInp << "*Generated from call: SetCut('CUTNEU',cut);";
- AliceInp << endl;
- AliceInp << setw(10) << "PART-THR ";
- AliceInp << setiosflags(ios::scientific) << setprecision(5);
- AliceInp << setw(10) << -fCutValue[i];
- AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
- AliceInp << setw(10) << 8.0; // Neutron
- AliceInp << setw(10) << 9.0; // Antineutron
- AliceInp << endl;
- AliceInp << setw(10) << "PART-THR ";
- AliceInp << setiosflags(ios::scientific) << setprecision(5);
- AliceInp << setw(10) << -fCutValue[i];
- AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(2);
- AliceInp << setw(10) << 12.0; // Kaon zero long
- AliceInp << setw(10) << 12.0; // Kaon zero long
- AliceInp << endl;
- AliceInp << setw(10) << "PART-THR ";
- AliceInp << setiosflags(ios::scientific) << setprecision(5);
- AliceInp << setw(10) << -fCutValue[i];
- AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(2);
- AliceInp << setw(10) << 17.0; // Lambda, 18=Antilambda
- AliceInp << setw(10) << 19.0; // Kaon zero short
- AliceInp << endl;
- AliceInp << setw(10) << "PART-THR ";
- AliceInp << setiosflags(ios::scientific) << setprecision(5);
- AliceInp << setw(10) << -fCutValue[i];
- AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(2);
- AliceInp << setw(10) << 22.0; // Sigma zero, Pion zero, Kaon zero
- AliceInp << setw(10) << 25.0; // Antikaon zero
- AliceInp << endl;
- AliceInp << setw(10) << "PART-THR ";
- AliceInp << setiosflags(ios::scientific) << setprecision(5);
- AliceInp << setw(10) << -fCutValue[i];
- AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(2);
- AliceInp << setw(10) << 32.0; // Antisigma zero
- AliceInp << setw(10) << 32.0; // Antisigma zero
- AliceInp << endl;
- AliceInp << setw(10) << "PART-THR ";
- AliceInp << setiosflags(ios::scientific) << setprecision(5);
- AliceInp << setw(10) << -fCutValue[i];
- AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(2);
- AliceInp << setw(10) << 34.0; // Xi zero
- AliceInp << setw(10) << 35.0; // AntiXi zero
- AliceInp << endl;
- AliceInp << setw(10) << "PART-THR ";
- AliceInp << setiosflags(ios::scientific) << setprecision(5);
- AliceInp << setw(10) << -fCutValue[i];
- AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(2);
- AliceInp << setw(10) << 47.0; // D zero
- AliceInp << setw(10) << 48.0; // AntiD zero
- AliceInp << endl;
- AliceInp << setw(10) << "PART-THR ";
- AliceInp << setiosflags(ios::scientific) << setprecision(5);
- AliceInp << setw(10) << -fCutValue[i];
- AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(2);
- AliceInp << setw(10) << 53.0; // Xi_c zero
- AliceInp << setw(10) << 53.0; // Xi_c zero
- AliceInp << endl;
- AliceInp << setw(10) << "PART-THR ";
- AliceInp << setiosflags(ios::scientific) << setprecision(5);
- AliceInp << setw(10) << -fCutValue[i];
- AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(2);
- AliceInp << setw(10) << 55.0; // Xi'_c zero
- AliceInp << setw(10) << 56.0; // Omega_c zero
- AliceInp << endl;
- AliceInp << setw(10) << "PART-THR ";
- AliceInp << setiosflags(ios::scientific) << setprecision(5);
- AliceInp << setw(10) << -fCutValue[i];
- AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(2);
- AliceInp << setw(10) << 59.0; // AntiXi_c zero
- AliceInp << setw(10) << 59.0; // AntiXi_c zero
- AliceInp << endl;
- AliceInp << setw(10) << "PART-THR ";
- AliceInp << setiosflags(ios::scientific) << setprecision(5);
- AliceInp << setw(10) << -fCutValue[i];
- AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(2);
- AliceInp << setw(10) << 61.0; // AntiXi'_c zero
- AliceInp << setw(10) << 62.0; // AntiOmega_c zero
- AliceInp << endl;
+ fprintf(pAliceInp,"*\n*Cut for neutral hadrons\n");
+ fprintf(pAliceInp,"*Generated from call: SetCut('CUTNEU',cut);\n");
+
+ // 8.0 = Neutron
+ // 9.0 = Antineutron
+ fprintf(pAliceInp,"PART-THR %e10.4%f10.1%f10.1\n",-fCutValue[i],8.0,9.0);
+
+ // 12.0 = Kaon zero long
+ // 12.0 = Kaon zero long
+ fprintf(pAliceInp,"PART-THR %e10.4%f10.1%f10.1\n",-fCutValue[i],12.0,12.0);
+
+ // 17.0 = Lambda, 18.0 = Antilambda
+ // 19.0 = Kaon zero short
+ fprintf(pAliceInp,"PART-THR %e10.4%f10.1%f10.1\n",-fCutValue[i],17.0,19.0);
+
+ // 22.0 = Sigma zero, Pion zero, Kaon zero
+ // 25.0 = Antikaon zero
+ fprintf(pAliceInp,"PART-THR %e10.4%f10.1%f10.1\n",-fCutValue[i],22.0,25.0);
+
+ // 32.0 = Antisigma zero
+ // 32.0 = Antisigma zero
+ fprintf(pAliceInp,"PART-THR %e10.4%f10.1%f10.1\n",-fCutValue[i],32.0,32.0);
+
+ // 34.0 = Xi zero
+ // 35.0 = AntiXi zero
+ fprintf(pAliceInp,"PART-THR %e10.4%f10.1%f10.1\n",-fCutValue[i],34.0,35.0);
+
+ // 47.0 = D zero
+ // 48.0 = AntiD zero
+ fprintf(pAliceInp,"PART-THR %e10.4%f10.1%f10.1\n",-fCutValue[i],47.0,48.0);
+
+ // 53.0 = Xi_c zero
+ // 53.0 = Xi_c zero
+ fprintf(pAliceInp,"PART-THR %e10.4%f10.1%f10.1\n",-fCutValue[i],53.0,53.0);
+
+ // 55.0 = Xi'_c zero
+ // 56.0 = Omega_c zero
+ fprintf(pAliceInp,"PART-THR %e10.4%f10.1%f10.1\n",-fCutValue[i],55.0,56.0);
+
+ // 59.0 = AntiXi_c zero
+ // 59.0 = AntiXi_c zero
+ fprintf(pAliceInp,"PART-THR %e10.4%f10.1%f10.1\n",-fCutValue[i],59.0,59.0);
+
+ // 61.0 = AntiXi'_c zero
+ // 62.0 = AntiOmega_c zero
+ fprintf(pAliceInp,"PART-THR %e10.4%f10.1%f10.1\n",-fCutValue[i],61.0,62.0);
}
// charged hadrons
// G3 default value: 0.01 GeV
//gMC ->SetCut("CUTHAD",cut); // cut for charged hadrons
else if (strncmp(&sCutFlag[i][0],"CUTHAD",6) == 0) {
- AliceInp << "*";
- AliceInp << endl;
- AliceInp << "*Cut for charged hadrons";
- AliceInp << endl;
- AliceInp << "*Generated from call: SetCut('CUTHAD',cut);";
- AliceInp << endl;
- AliceInp << setw(10) << "PART-THR ";
- AliceInp << setiosflags(ios::scientific) << setprecision(5);
- AliceInp << setw(10) << -fCutValue[i];
- AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
- AliceInp << setw(10) << 1.0; // Proton
- AliceInp << setw(10) << 2.0; // Antiproton
- AliceInp << endl;
- AliceInp << setw(10) << "PART-THR ";
- AliceInp << setiosflags(ios::scientific) << setprecision(5);
- AliceInp << setw(10) << -fCutValue[i];
- AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(2);
- AliceInp << setw(10) << 13.0; // Positive Pion, Negative Pion, Positive Kaon
- AliceInp << setw(10) << 16.0; // Negative Kaon
- AliceInp << endl;
- AliceInp << setw(10) << "PART-THR ";
- AliceInp << setiosflags(ios::scientific) << setprecision(5);
- AliceInp << setw(10) << -fCutValue[i];
- AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(2);
- AliceInp << setw(10) << 20.0; // Negative Sigma
- AliceInp << setw(10) << 16.0; // Positive Sigma
- AliceInp << endl;
- AliceInp << setw(10) << "PART-THR ";
- AliceInp << setiosflags(ios::scientific) << setprecision(5);
- AliceInp << setw(10) << -fCutValue[i];
- AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(2);
- AliceInp << setw(10) << 31.0; // Antisigma minus
- AliceInp << setw(10) << 33.0; // Antisigma plus
- AliceInp << setprecision(1);
- AliceInp << setw(10) << 2.0; // step length
- AliceInp << endl;
- AliceInp << setw(10) << "PART-THR ";
- AliceInp << setiosflags(ios::scientific) << setprecision(5);
- AliceInp << setw(10) << -fCutValue[i];
- AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(2);
- AliceInp << setw(10) << 36.0; // Negative Xi, Positive Xi, Omega minus
- AliceInp << setw(10) << 39.0; // Antiomega
- AliceInp << endl;
- AliceInp << setw(10) << "PART-THR ";
- AliceInp << setiosflags(ios::scientific) << setprecision(5);
- AliceInp << setw(10) << -fCutValue[i];
- AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(2);
- AliceInp << setw(10) << 45.0; // D plus
- AliceInp << setw(10) << 46.0; // D minus
- AliceInp << endl;
- AliceInp << setw(10) << "PART-THR ";
- AliceInp << setiosflags(ios::scientific) << setprecision(5);
- AliceInp << setw(10) << -fCutValue[i];
- AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(2);
- AliceInp << setw(10) << 49.0; // D_s plus, D_s minus, Lambda_c plus
- AliceInp << setw(10) << 52.0; // Xi_c plus
- AliceInp << endl;
- AliceInp << setw(10) << "PART-THR ";
- AliceInp << setiosflags(ios::scientific) << setprecision(5);
- AliceInp << setw(10) << -fCutValue[i];
- AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(2);
- AliceInp << setw(10) << 54.0; // Xi'_c plus
- AliceInp << setw(10) << 60.0; // AntiXi'_c minus
- AliceInp << setprecision(1);
- AliceInp << setw(10) << 6.0; // step length
- AliceInp << endl;
- AliceInp << setw(10) << "PART-THR ";
- AliceInp << setiosflags(ios::scientific) << setprecision(5);
- AliceInp << setw(10) << -fCutValue[i];
- AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(2);
- AliceInp << setw(10) << 57.0; // Antilambda_c minus
- AliceInp << setw(10) << 58.0; // AntiXi_c minus
- AliceInp << endl;
+ fprintf(pAliceInp,"*\n*Cut for charged hadrons\n");
+ fprintf(pAliceInp,"*Generated from call: SetCut('CUTHAD',cut);\n");
+
+ // 1.0 = Proton
+ // 2.0 = Antiproton
+ fprintf(pAliceInp,"PART-THR %e10.4%f10.1%f10.1\n",-fCutValue[i],1.0,2.0);
+
+ // 13.0 = Positive Pion, Negative Pion, Positive Kaon
+ // 16.0 = Negative Kaon
+ fprintf(pAliceInp,"PART-THR %e10.4%f10.1%f10.1\n",-fCutValue[i],13.0,16.0);
+
+ // 20.0 = Negative Sigma
+ // 21.0 = Positive Sigma
+ fprintf(pAliceInp,"PART-THR %e10.4%f10.1%f10.1\n",-fCutValue[i],20.0,21.0);
+
+ // 31.0 = Antisigma minus
+ // 33.0 = Antisigma plus
+ // 2.0 = step length
+ fprintf(pAliceInp,"PART-THR %e10.4%f10.1%f10.1%f10.1\n",-fCutValue[i],31.0,33.0,2.0);
+
+ // 36.0 = Negative Xi, Positive Xi, Omega minus
+ // 39.0 = Antiomega
+ fprintf(pAliceInp,"PART-THR %e10.4%f10.1%f10.1\n",-fCutValue[i],36.0,39.0);
+
+ // 45.0 = D plus
+ // 46.0 = D minus
+ fprintf(pAliceInp,"PART-THR %e10.4%f10.1%f10.1\n",-fCutValue[i],45.0,46.0);
+
+ // 49.0 = D_s plus, D_s minus, Lambda_c plus
+ // 52.0 = Xi_c plus
+ fprintf(pAliceInp,"PART-THR %e10.4%f10.1%f10.1\n",-fCutValue[i],49.0,52.0);
+
+ // 54.0 = Xi'_c plus
+ // 60.0 = AntiXi'_c minus
+ // 6.0 = step length
+ fprintf(pAliceInp,"PART-THR %e10.4%f10.1%f10.1%f10.1\n",-fCutValue[i],54.0,60.0,6.0);
+
+ // 57.0 = Antilambda_c minus
+ // 58.0 = AntiXi_c minus
+ fprintf(pAliceInp,"PART-THR %e10.4%f10.1%f10.1\n",-fCutValue[i],57.0,58.0);
}
// muons
// G3 default value: 0.01 GeV
//gMC ->SetCut("CUTMUO",cut); // cut for mu+, mu-
else if (strncmp(&sCutFlag[i][0],"CUTMUO",6) == 0) {
- AliceInp << "*";
- AliceInp << endl;
- AliceInp << "*Cut for muons";
- AliceInp << endl;
- AliceInp << "*Generated from call: SetCut('CUTMUO',cut);";
- AliceInp << endl;
- AliceInp << setw(10) << "PART-THR ";
- AliceInp << setiosflags(ios::scientific) << setprecision(5);
- AliceInp << setw(10) << -fCutValue[i];
- AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
- AliceInp << setprecision(2);
- AliceInp << setw(10) << 10.0;
- AliceInp << setw(10) << 11.0;
- AliceInp << endl;
+ fprintf(pAliceInp,"*\n*Cut for muons\n");
+ fprintf(pAliceInp,"*Generated from call: SetCut('CUTMUO',cut);\n");
+ // 10.0 = Muon+
+ // 11.0 = Muon-
+ fprintf(pAliceInp,"PART-THR %e10.4%f10.1%f10.1\n",-fCutValue[i],10.0,11.0);
}
+
// delta-rays by electrons
// G4 particles: "e-"
// G3 default value: 10**4 GeV
// gMC ->SetCut("DCUTE",cut); // cut for deltarays by electrons ???????????????
else if (strncmp(&sCutFlag[i][0],"DCUTE",5) == 0) {
- AliceInp << "*";
- AliceInp << endl;
- AliceInp << "*Cut for delta rays by electrons ????????????";
- AliceInp << endl;
- AliceInp << "*Generated from call: SetCut('DCUTE',cut);";
- AliceInp << endl;
- AliceInp << setw(10) << "EMFCUT ";
- AliceInp << setiosflags(ios::scientific) << setprecision(5);
- AliceInp << setw(10) << -fCutValue[i];
- AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
- AliceInp << setw(10) << 0.0;
- AliceInp << setw(10) << 0.0;
- AliceInp << setw(10) << 3.0;
- AliceInp << setprecision(2);
- AliceInp << setw(10) << fLastMaterial;
- AliceInp << setprecision(1);
- AliceInp << setw(10) << 1.0;
- AliceInp << endl;
+ fprintf(pAliceInp,"*\n*Cut for delta rays by electrons ????????????\n");
+ fprintf(pAliceInp,"*Generated from call: SetCut('DCUTE',cut);\n");
+ // -fCutValue[i];
+ // zero = ignored
+ // zero = ignored
+ // three = lower bound of the material indices in which the respective thresholds apply
+ // fLastMaterial = upper bound of the material indices in which the respective thresholds apply
+ fprintf(pAliceInp,"EMFCUT %e10.4%f10.1%f10.1%f10.1%f10.1\n",-fCutValue[i],zero,zero,three,fLastMaterial);
}
//
// G3 default value: 0.01 GeV
//gMC ->SetCut("TOFMAX",tofmax); // time of flight cuts in seconds
else if (strncmp(&sCutFlag[i][0],"TOFMAX",6) == 0) {
- AliceInp << "*";
- AliceInp << endl;
- AliceInp << "*Time of flight cuts in seconds";
- AliceInp << endl;
- AliceInp << "*Generated from call: SetCut('TOFMAX',tofmax);";
- AliceInp << endl;
- AliceInp << setw(10) << "TIME-CUT ";
- AliceInp << setiosflags(ios::scientific) << setprecision(5);
- AliceInp << setw(10) << fCutValue[i]*1.e9;
- AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
- AliceInp << setw(10) << 0.0;
- AliceInp << setw(10) << 0.0;
- AliceInp << setw(10) << -6.0; // lower bound of the particle numbers for which the transport time cut-off and/or the start signal is to be applied
- AliceInp << setprecision(2);
- AliceInp << setw(10) << 64.0; // upper bound of the particle numbers for which the transport time cut-off and/or the start signal is to be applied
- AliceInp << setprecision(1);
- AliceInp << setw(10) << 1.0; // step length in assigning numbers
- AliceInp << endl;
+ fprintf(pAliceInp,"*\n*Time of flight cuts in seconds\n");
+ fprintf(pAliceInp,"*Generated from call: SetCut('TOFMAX',tofmax);\n");
+ // zero = ignored
+ // zero = ignored
+ // -6.0 = lower bound of the particle numbers for which the transport time cut-off and/or the start signal is to be applied
+ // 64.0 = upper bound of the particle numbers for which the transport time cut-off and/or the start signal is to be applied
+ fprintf(pAliceInp,"TIME-CUT %e10.4%f10.1%f10.1%f10.1%f10.1\n",fCutValue[i]*1.e9,zero,zero,-6.0,64.0);
}
else {
} //end of loop over SeCut calls
// Add START and STOP card
- AliceInp << setw(10) << "START ";
- AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint);
- AliceInp << setw(10) << fEventsPerRun;
- AliceInp << endl;
- AliceInp << setw(10) << "STOP ";
- AliceInp << endl;
+ fprintf(pAliceInp,"START %f10.1\n",fEventsPerRun);
+ fprintf(pAliceInp,"STOP \n");
} // end of InitPhysics