ConfigPPR.C removed to avoid confusions with Config.C. Config.C contains all the...

diff --git a/macros/ConfigPPR.C b/macros/ConfigPPR.C
deleted file mode 100644 (file)
index 1bab270..0000000
--- a/macros/ConfigPPR.C
+++ /dev/null
@@ -1,317 +0,0 @@
-void Config()
-{
-  //
-  // Set Random Number seed
-  gRandom->SetSeed(12345);
-  
-  // ThetaRange is (0., 180.). It was (0.28,179.72) 7/12/00 09:00
-  new AliGeant3("C++ Interface to Geant3");
-
-  //=======================================================================
-  //  Create the output file
-   
-  TFile *rootfile = new TFile("galice.root","recreate");
-  rootfile->SetCompressionLevel(2);
-  TGeant3 *geant3 = (TGeant3*)gMC;
-
-  //
-  // Set External decayer
-  AliDecayer* decayer = new AliDecayerPythia();
-  decayer->SetForceDecay(kAll);
-  decayer->Init();
-  gMC->SetExternalDecayer(decayer);
-
-  //
-  //
-  //=======================================================================
-  // ******* GEANT STEERING parameters FOR ALICE SIMULATION *******
-  geant3->SetTRIG(1); //Number of events to be processed 
-  geant3->SetSWIT(4,10);
-  geant3->SetDEBU(0,0,1);
-  //geant3->SetSWIT(2,2);
-  geant3->SetDCAY(1);
-  geant3->SetPAIR(1);
-  geant3->SetCOMP(1);
-  geant3->SetPHOT(1);
-  geant3->SetPFIS(0);
-  geant3->SetDRAY(0);
-  geant3->SetANNI(1);
-  geant3->SetBREM(1);
-  geant3->SetMUNU(1);
-  geant3->SetCKOV(1);
-  geant3->SetHADR(1); //Select pure GEANH (HADR 1) or GEANH/NUCRIN (HADR 3)
-  geant3->SetLOSS(2);
-  geant3->SetMULS(1);
-  geant3->SetRAYL(1);
-  geant3->SetAUTO(1); //Select automatic STMIN etc... calc. (AUTO 1) or manual (AUTO 0)
-  geant3->SetABAN(0); //Restore 3.16 behaviour for abandoned tracks
-  geant3->SetOPTI(2); //Select optimisation level for GEANT geometry searches (0,1,2)
-  geant3->SetERAN(5.e-7);
-
-  Float_t cut    = 1.e-3; // 1MeV cut by default
-  Float_t tofmax = 1.e10;
-  //             GAM ELEC NHAD CHAD MUON EBREM MUHAB EDEL MUDEL MUPA TOFMAX
-  geant3->SetCUTS(cut,cut, cut, cut, cut, cut,  cut,  cut, cut,  cut, tofmax);
-  //
-  //=======================================================================
-  // ************* STEERING parameters FOR ALICE SIMULATION **************
-  // --- Specify event type to be tracked through the ALICE setup
-  // --- All positions are in cm, angles in degrees, and P and E in GeV
-  AliGenHIJINGpara *gener = new AliGenHIJINGpara(84210);
-  gener->SetMomentumRange(0,999);
-  gener->SetPhiRange(0,360);
-  //  gener->SetThetaRange(0.28,179.72);
-  gener->SetThetaRange(0.,180.);
-  gener->SetOrigin(0,0,0);        //vertex position
-  gener->SetSigma(0,0,0);         //Sigma in (X,Y,Z) (cm) on IP position
-  gener->Init();
-  // 
-  // Activate this line if you want the vertex smearing to happen
-  // track by track
-  //
-  //gener->SetVertexSmear(perTrack); 
-
-  gAlice->SetField(-999,2);    //Specify maximum magnetic field in Tesla (neg. ==> default field)
-
-  Int_t iABSO=1;
-  Int_t iCASTOR=1;
-  Int_t iDIPO=1;
-  Int_t iFMD=1;
-  Int_t iFRAME=1;
-  Int_t iHALL=1;
-  Int_t iITS=1;
-  Int_t iMAG=1;
-  Int_t iMUON=1;
-  Int_t iPHOS=1;
-  Int_t iPIPE=1;
-  Int_t iPMD=1;
-  Int_t iRICH=1;
-  Int_t iSHIL=1;
-  Int_t iSTART=1;
-  Int_t iTOF=1;
-  Int_t iTPC=1;
-  Int_t iTRD=1;
-  Int_t iZDC=1;
-
-  //=================== Alice BODY parameters =============================
-  AliBODY *BODY = new AliBODY("BODY","Alice envelop");
-
-  if(iMAG) {
-    //=================== MAG parameters ============================
-    // --- Start with Magnet since detector layouts may be depending ---
-    // --- on the selected Magnet dimensions ---
-    AliMAG *MAG  = new AliMAG("MAG","Magnet");
-  }
-
-
-  if(iABSO) {
-    //=================== ABSO parameters ============================
-    AliABSO *ABSO  = new AliABSOv0("ABSO","Muon Absorber");
-  }
-
-  if(iDIPO) {
-    //=================== DIPO parameters ============================
-
-    AliDIPO *DIPO  = new AliDIPOv2("DIPO","Dipole version 2");
-  }
-
-  if(iHALL) {
-    //=================== HALL parameters ============================
-
-    AliHALL *HALL  = new AliHALL("HALL","Alice Hall");
-  }
-
-
-  if(iFRAME) {
-    //=================== FRAME parameters ============================
-
-    AliFRAME *FRAME  = new AliFRAMEv2("FRAME","Space Frame");
-
-  }
-
-  if(iSHIL) {
-    //=================== SHIL parameters ============================
-
-    AliSHIL *SHIL  = new AliSHILv0("SHIL","Shielding");
-  }
-
-
-  if(iPIPE) {
-    //=================== PIPE parameters ============================
-
-    AliPIPE *PIPE  = new AliPIPEv0("PIPE","Beam Pipe");
-  }
-
-
-  if(iITS) {
-
-//=================== ITS parameters ============================
-    //
-    // As the innermost detector in ALICE, the Inner Tracking System "impacts" on
-    // almost all other detectors. This involves the fact that the ITS geometry
-    // still has several options to be followed in parallel in order to determine
-    // the best set-up which minimizes the induced background. All the geometries
-    // available to date are described in the following. Read carefully the comments
-    // and use the default version (the only one uncommented) unless you are making
-    // comparisons and you know what you are doing. In this case just uncomment the
-    // ITS geometry you want to use and run Aliroot.
-    //
-    // Detailed geometries:         
-    //
-    //
-    //AliITS *ITS  = new AliITSv5symm("ITS","Updated ITS TDR detailed version with symmetric services");
-    //
-    //AliITS *ITS  = new AliITSv5asymm("ITS","Updates ITS TDR detailed version with asymmetric services");
-    //
-    AliITSvPPRasymm *ITS  = new AliITSvPPRasymm("ITS","New ITS PPR detailed version with asymmetric services");
-    ITS->SetMinorVersion(2);                                         // don't touch this parameter if you're not an ITS developer
-    ITS->SetReadDet(kFALSE);                                         // don't touch this parameter if you're not an ITS developer
-    ITS->SetWriteDet("$ALICE_ROOT/ITS/ITSgeometry_vPPRasymm2.det");  // don't touch this parameter if you're not an ITS developer
-    ITS->SetThicknessDet1(300.);   // detector thickness on layer 1 must be in the range [100,300]
-    ITS->SetThicknessDet2(300.);   // detector thickness on layer 2 must be in the range [100,300]
-    ITS->SetThicknessChip1(300.);  // chip thickness on layer 1 must be in the range [150,300]
-    ITS->SetThicknessChip2(300.);  // chip thickness on layer 2 must be in the range [150,300]
-    ITS->SetRails(1);             // 1 --> rails in ; 0 --> rails out
-    ITS->SetCoolingFluid(1);       // 1 --> water ; 0 --> freon
-    //
-    //AliITSvPPRsymm *ITS  = new AliITSvPPRsymm("ITS","New ITS PPR detailed version with symmetric services");
-    //ITS->SetMinorVersion(2);                                       // don't touch this parameter if you're not an ITS developer
-    //ITS->SetReadDet(kFALSE);                                       // don't touch this parameter if you're not an ITS developer
-    //ITS->SetWriteDet("$ALICE_ROOT/ITS/ITSgeometry_vPPRsymm2.det"); // don't touch this parameter if you're not an ITS developer
-    //ITS->SetThicknessDet1(300.);   // detector thickness on layer 1 must be in the range [100,300]
-    //ITS->SetThicknessDet2(300.);   // detector thickness on layer 2 must be in the range [100,300]
-    //ITS->SetThicknessChip1(300.);  // chip thickness on layer 1 must be in the range [150,300]
-    //ITS->SetThicknessChip2(300.);  // chip thickness on layer 2 must be in the range [150,300]
-    //ITS->SetRails(1);              // 1 --> rails in ; 0 --> rails out
-    //ITS->SetCoolingFluid(1);       // 1 --> water ; 0 --> freon
-    //
-    //
-    // Coarse geometries (warning: no hits are produced with these coarse geometries and they unuseful 
-    // for reconstruction !):
-    //                                                     
-    //
-    //AliITSvPPRcoarseasymm *ITS  = new AliITSvPPRcoarseasymm("ITS","New ITS PPR coarse version with asymmetric services");
-    //ITS->SetRails(1);                // 1 --> rails in ; 0 --> rails out
-    //ITS->SetSupportMaterial(0);      // 0 --> Copper ; 1 --> Aluminum ; 2 --> Carbon
-    //
-    //AliITS *ITS  = new AliITSvPPRcoarsesymm("ITS","New ITS PPR coarse version with symmetric services");
-    //ITS->SetRails(1);                // 1 --> rails in ; 0 --> rails out
-    //ITS->SetSupportMaterial(0);      // 0 --> Copper ; 1 --> Aluminum ; 2 --> Carbon
-    //                      
-    //
-    //
-    // Geant3 <-> EUCLID conversion
-    // ============================
-    //
-    // SetEUCLID is a flag to output (=1) or not to output (=0) both geometry and
-    // media to two ASCII files (called by default ITSgeometry.euc and
-    // ITSgeometry.tme) in a format understandable to the CAD system EUCLID.
-    // The default (=0) means that you dont want to use this facility.
-    //
-    ITS->SetEUCLID(0);  
-  }
-  
-
-  if(iTPC) {
-    //============================ TPC parameters ================================
-    // --- This allows the user to specify sectors for the SLOW (TPC geometry 2)
-    // --- Simulator. SecAL (SecAU) <0 means that ALL lower (upper)
-    // --- sectors are specified, any value other than that requires at least one 
-    // --- sector (lower or upper)to be specified!
-    // --- Reminder: sectors 1-24 are lower sectors (1-12 -> z>0, 13-24 -> z<0)
-    // ---           sectors 25-72 are the upper ones (25-48 -> z>0, 49-72 -> z<0)
-    // --- SecLows - number of lower sectors specified (up to 6)
-    // --- SecUps - number of upper sectors specified (up to 12)
-    // --- Sens - sensitive strips for the Slow Simulator !!!
-    // --- This does NOT work if all S or L-sectors are specified, i.e.
-    // --- if SecAL or SecAU < 0
-    //
-    //
-    //-----------------------------------------------------------------------------
-
-    //  gROOT->LoadMacro("SetTPCParam.C");
-    //  AliTPCParam *param = SetTPCParam();
-    AliTPC *TPC  = new AliTPCv2("TPC","Default");
-    // All sectors included 
-    TPC->SetSecAL(-1);
-    TPC->SetSecAU(-1);
-
-  }
-
-
-  if(iTOF) {
-    //=================== TOF parameters ============================
-    AliTOF *TOF  = new AliTOFv2("TOF","normal TOF");
-  }
-
-  if(iRICH) {
-    //=================== RICH parameters ===========================
-    AliRICH *RICH  = new AliRICHv1("RICH","normal RICH");    
-
-  }
-
-
-  if(iZDC) {
-    //=================== ZDC parameters ============================
-
-    AliZDC *ZDC  = new AliZDCv1("ZDC","normal ZDC");
-  }
-
-  if(iCASTOR) {
-    //=================== CASTOR parameters ============================
-
-    AliCASTOR *CASTOR  = new AliCASTORv1("CASTOR","normal CASTOR");
-  }
-
-  if(iTRD) {
-    //=================== TRD parameters ============================
-  
-    AliTRD *TRD  = new AliTRDv1("TRD","TRD slow simulator");
-  
-    // Select the gas mixture (0: 97% Xe + 3% isobutane, 1: 90% Xe + 10% CO2)
-    TRD->SetGasMix(1);
-  
-    // With hole in front of PHOS
-    TRD->SetPHOShole();
-    // With hole in front of RICH
-    TRD->SetRICHhole();
-    // Switch on TR
-    AliTRDsim *TRDsim = TRD->CreateTR();
-  }
-
-  if(iFMD) {
-    //=================== FMD parameters ============================
-
-    AliFMD *FMD  = new AliFMDv0("FMD","normal FMD");
-  }
-
-  if(iMUON) {
-    //=================== MUON parameters ===========================
-    AliMUON *MUON  = new AliMUONv1("MUON","default");
-  }
- 
-  //=================== PHOS parameters ===========================
-
-  if(iPHOS) {
-    AliPHOS *PHOS  = new AliPHOSv1("PHOS","GPS2");
-  }
-
-
-  if(iPMD) {
-    //=================== PMD parameters ============================
-
-    AliPMD *PMD  = new AliPMDv1("PMD","normal PMD");
-    PMD->SetPAR(1., 1., 0.8, 0.02);
-    PMD->SetIN(6., 18., -580., 27., 27.);
-    PMD->SetGEO(0.0, 0.2, 4.);
-    PMD->SetPadSize(0.8, 1.0, 1.0, 1.5);
-
-  }
-
-  if(iSTART) {
-    //=================== START parameters ============================
-    AliSTART *START  = new AliSTARTv1("START","START Detector");
-  }
-
-         
-}