u/mrichter/AliRoot.git
8 years agoUpdating EMCAL configuration at P2 - adding new DPs.
zampolli [Mon, 18 Apr 2011 13:13:34 +0000]
Updating EMCAL configuration at P2 - adding new DPs.

8 years ago- set X titles in the task, so that the canvases can be filled in loops in the macro
kkanaki [Mon, 18 Apr 2011 13:09:27 +0000]
- set X titles in the task, so that the canvases can be filled in loops in the macro

8 years agoUpdating TPC configuration with new DPs.
zampolli [Mon, 18 Apr 2011 13:01:13 +0000]
Updating TPC configuration with new DPs.

8 years agoSet flag to kFALSE after compression
cblume [Mon, 18 Apr 2011 12:57:28 +0000]
Set flag to kFALSE after compression

8 years agoAdding additional detectors )all outer )
marian [Mon, 18 Apr 2011 12:43:27 +0000]
Adding additional detectors  )all outer )

Jochen + Rongrong

8 years agoadd calculation of epsilon using (1-x)+x*ncoll as a weight
snelling [Mon, 18 Apr 2011 12:38:05 +0000]
add calculation of epsilon using (1-x)+x*ncoll as a weight

8 years agonext version for gsi train
loizides [Mon, 18 Apr 2011 11:41:39 +0000]
next version for gsi train

8 years ago- DCA calculations according to what is done in the PWG1 task
kkanaki [Mon, 18 Apr 2011 09:02:51 +0000]
- DCA calculations according to what is done in the PWG1 task

8 years agoChange requested by Benjamin
cblume [Mon, 18 Apr 2011 08:56:17 +0000]
Change requested by Benjamin

8 years agoChanges and bugfixes by Uwe
cblume [Mon, 18 Apr 2011 08:51:47 +0000]
Changes and bugfixes by Uwe

8 years agoUpdate
dainese [Mon, 18 Apr 2011 08:16:33 +0000]
Update

8 years agofull chain for pass0: channels equalizing and season time shift correction
alla [Mon, 18 Apr 2011 07:49:53 +0000]
full chain for pass0: channels equalizing and season time shift correction

8 years agoefficiency histograms added
alla [Mon, 18 Apr 2011 07:22:49 +0000]
efficiency histograms added

8 years ago- calculate the DCA for offline as for HLT, without the use of the TPC inner parameters
kkanaki [Sun, 17 Apr 2011 20:44:17 +0000]
- calculate the DCA for offline as for HLT, without the use of the TPC inner parameters
- use as default cuts in compare-HLT-offline-local.C, |eta|<0.9, pt>0.3 GeV/c, |DCAr|<7 cm and |DCAz|<7 cm (adjustable)

8 years agoRenamed some vars plus print task settings in usercreateobjects
loizides [Sun, 17 Apr 2011 19:22:15 +0000]
Renamed some vars plus print task settings in usercreateobjects

8 years agoRemove forgotten debug statements
loizides [Sun, 17 Apr 2011 18:53:39 +0000]
Remove forgotten debug statements

8 years agoGet trigger primitive information and do trigger cluster matching
loizides [Sun, 17 Apr 2011 18:32:51 +0000]
Get trigger primitive information and do trigger cluster matching
Reduce memory footprint
Train mode to save memory

8 years agocorrect selection of embedded signal clusters, get new list of clusters from input...
gconesab [Sun, 17 Apr 2011 18:01:01 +0000]
correct selection of embedded signal clusters, get new list of clusters from input or output event

8 years ago- overload the constructor with arguments for cuts on eta, pt, DCAr and DCAz
kkanaki [Sun, 17 Apr 2011 17:33:34 +0000]
- overload the constructor with arguments for cuts on eta, pt, DCAr and DCAz
  (default values deliberately are loose)
- saved these values in the output of the task for use in the drawing macro

8 years ago- DCAr and DCAz with cuts are removed, not necessary
kkanaki [Sun, 17 Apr 2011 16:14:53 +0000]
- DCAr and DCAz with cuts are removed, not necessary
- rearrange drawing macro

8 years ago- save the canvas with the cut distribution
kkanaki [Sun, 17 Apr 2011 15:24:22 +0000]
- save the canvas with the cut distribution

8 years ago- include a series of HLT histograms with cuts for selecting primary tracks
kkanaki [Sun, 17 Apr 2011 15:21:49 +0000]
- include a series of HLT histograms with cuts for selecting primary tracks
- rearranged histo titles for reducing the number of calls in the drawing macro
- removed obsolete unused histograms

8 years ago- fill more histograms to match the central barrel task output
kkanaki [Sun, 17 Apr 2011 14:38:29 +0000]
- fill more histograms to match the central barrel task output
- unify the canvases to bear the same names and have the same content for the two tasks

8 years ago- added the V0 centrality information to be filled when the beam type is Pb-Pb
kkanaki [Sun, 17 Apr 2011 12:15:46 +0000]
- added the V0 centrality information to be filled when the beam type is Pb-Pb

8 years agoincrease classdef version
kleinb [Sun, 17 Apr 2011 11:35:15 +0000]
increase classdef version

8 years ago- fixed the statistics box printing
kkanaki [Sun, 17 Apr 2011 11:31:37 +0000]
- fixed the statistics box printing

8 years agocorrected OCDB storage path for trigger info + added few AliInfo lines for now
dsilverm [Sun, 17 Apr 2011 09:00:14 +0000]
corrected OCDB storage path for trigger info + added few AliInfo lines for now

8 years agoPrevent skipping of 1st line in the list of derivatives files
shahoian [Sun, 17 Apr 2011 01:51:44 +0000]
Prevent skipping of 1st line in the list of derivatives files

8 years ago- call function for global task to set the beam type
kkanaki [Sat, 16 Apr 2011 22:16:07 +0000]
- call function for global task to set the beam type

8 years ago- included run number and date info in the output list
kkanaki [Sat, 16 Apr 2011 22:15:29 +0000]
- included run number and date info in the output list
- added function to set the beam type (used for setting histogram ranges)
- removed a lot of unused histograms
- modifed macro to create a folder and save the png and ROOT file in there

8 years ago- added the task name in front of the folder name with the run number and the date...
kkanaki [Sat, 16 Apr 2011 22:11:14 +0000]
- added the task name in front of the folder name with the run number and the date info

8 years agoscript to download the set of the alien files
marian [Sat, 16 Apr 2011 19:50:57 +0000]
script to download the set of the alien files

# Arguments:
#   $1 fileList
#   $2 timeOut in seconds
#   $3 nprocess
#   $4 prefix
#
# Algorithm:
#   1. Check the input parameters
#   2. Group randomly the files into the group - generates nprocess download scripts
#   3. Start $nprocess to download the files - with forced timeout
# Example usage:
# 1. Create file list
# alien_find /alice/data/2010/LHC10h/000138795/pass0_2 root_ar | grep root > file.list
# 2. run script with timeout 60 and n processes 10 and the sarting diectory  -current directory
# $ALICE_ROOT/PWG1/CalibMacros/MergeCalibration/alienDownloadTimeOut.sh file.list 60 30 `pwd`

8 years agoadd a maximum cluster energy cut in the reader, apply this cut in the add task macro...
gconesab [Sat, 16 Apr 2011 19:24:14 +0000]
add a maximum cluster energy cut in the reader, apply this cut in the add task macro, avoid crazy channels when not removed yet from analysis; also correct EMCAL energy energy by non linearity from beam test

8 years agonew non linearity correction from beam test
gconesab [Sat, 16 Apr 2011 19:22:30 +0000]
new non linearity correction from beam test

8 years agodifferent vertex cut for pp and PbPb collisions, change vertex binning for mixing...
gconesab [Sat, 16 Apr 2011 18:33:24 +0000]
different vertex cut for pp and PbPb collisions, change vertex binning for mixing in pp and PbPb accordingly

8 years agoReader: Add option to remove or not event with primary vertex not reconstructed
gconesab [Sat, 16 Apr 2011 18:24:38 +0000]
Reader: Add option to remove or not event with primary vertex not reconstructed
Change centrality option from 5 to 20 when centrality is given up to 20
Photon and Pi0: Reduce number of filled histograms by default. Removed histograms can still be recovered via setters (conversion, pi0 invariant mass for different module combinations, event multiplitcity histograms for pp ...)
Macro: Correct some settings (phi range, z vertex event binning), reflect the above changes.

8 years ago- fixed documentation
kkanaki [Sat, 16 Apr 2011 18:13:54 +0000]
- fixed documentation

8 years ago- added functions to replace big parts of the macro that were being repeated
kkanaki [Sat, 16 Apr 2011 18:13:13 +0000]
- added functions to replace big parts of the macro that were being repeated
- removed the DCA plot read from the HLTesdTree
- saved a ROOT file in addition to the png output of the macro
- can be run in compiled mode too

8 years agoremoving osolete macros
marian [Sat, 16 Apr 2011 17:45:16 +0000]
removing osolete macros

8 years agomergeCustom.C mergeStage0.sh - adding macros for separate merging
marian [Sat, 16 Apr 2011 17:41:27 +0000]
mergeCustom.C mergeStage0.sh        - adding macros for separate merging

CalibTimeGain.C  CalibTimeVdrift.C  - removing obsolete macros

8 years ago- updates for synchronizing with the framework
kkanaki [Sat, 16 Apr 2011 16:44:26 +0000]
- updates for synchronizing with the framework
  (call PostData twice, set output TList ownership)

8 years agoAdding the TOF and T0 to the Pass0
marian [Sat, 16 Apr 2011 11:00:29 +0000]
Adding the TOF and T0 to the Pass0

8 years agoExporting Analysis headers
fca [Sat, 16 Apr 2011 06:20:19 +0000]
Exporting Analysis headers

8 years agoObsoleting g95
fca [Sat, 16 Apr 2011 06:17:24 +0000]
Obsoleting g95

8 years agoUpdate (Chiara)
dainese [Fri, 15 Apr 2011 21:33:58 +0000]
Update (Chiara)

8 years agoAdded PostData in UserCreateOutputObjects (Chiara)
dainese [Fri, 15 Apr 2011 21:33:29 +0000]
Added PostData in UserCreateOutputObjects (Chiara)

8 years agoChanged cut at high pt (Renu)
dainese [Fri, 15 Apr 2011 21:32:49 +0000]
Changed cut at high pt (Renu)

8 years agoAvoid to load the TPC response function twice.
morsch [Fri, 15 Apr 2011 14:13:35 +0000]
Avoid to load the TPC response function twice.
J. Wiechula

8 years agoEnable (handle by a flag) trigger conversion from raw2sdigits for embedding (Javier...
laphecet [Fri, 15 Apr 2011 13:46:53 +0000]
Enable (handle by a flag) trigger conversion from raw2sdigits for embedding (Javier thanks to Bogdan, Roberta and Enrico)

8 years agoPreprocessor related update (mainly from Jiri) to pick up TRU config info from DCS...
dsilverm [Fri, 15 Apr 2011 13:20:11 +0000]
Preprocessor related update (mainly from Jiri) to pick up TRU config info from DCS and store in OCDB

8 years agoUpdating TOF Pass0 class and macro (changing mane of output file and list).
zampolli [Fri, 15 Apr 2011 13:11:44 +0000]
Updating TOF Pass0 class and macro (changing mane of output file and list).

8 years ago- synchronize changes from the CB task and the drawing macro
kkanaki [Fri, 15 Apr 2011 12:04:12 +0000]
- synchronize changes from the CB task and the drawing macro

8 years ago- made the centrality selection work for the track properties
kkanaki [Fri, 15 Apr 2011 11:56:18 +0000]
- made the centrality selection work for the track properties
- few changes in the canvases where the overlaid histogams are printed to match the removal of the polar angle

8 years agoDeclare as connected an AODEvent read from tree
fca [Fri, 15 Apr 2011 11:24:37 +0000]
Declare as connected an AODEvent read from tree

8 years agoITS cluster multiplicity and TPC standalone multiplicity in AODHeader
morsch [Fri, 15 Apr 2011 10:46:20 +0000]
ITS cluster multiplicity and TPC standalone multiplicity in AODHeader

8 years ago- removed the polar angle from the filling of the track THnSparse, eta is sufficient
kkanaki [Fri, 15 Apr 2011 10:43:47 +0000]
- removed the polar angle from the filling of the track THnSparse, eta is sufficient
- removed the TPC track multiplicity from the filling of the track THnSparse, since the multiplicity selection
  will be done based on the V0 centrality
- removed the cuts based on the TPC track multiplicity
- changed the drawing macro to follow the above changes

8 years ago- added message for the case a canvas is not created when the entries of the THnSpars...
kkanaki [Fri, 15 Apr 2011 08:57:52 +0000]
- added message for the case a canvas is not created when the entries of the THnSparse that fills it are 0.

8 years ago- added function call for setting the pass number (according to the changes in the...
kkanaki [Fri, 15 Apr 2011 08:48:13 +0000]
- added function call for setting the pass number (according to the changes in the centrality selection task)

8 years agofca's changes -- take shelter -- optimising AOD tree handling
fca [Fri, 15 Apr 2011 08:45:41 +0000]
fca's changes -- take shelter -- optimising AOD tree handling

8 years agoCaching the variables in order to make calculation faster
marian [Fri, 15 Apr 2011 08:13:11 +0000]
Caching the variables in order to make calculation faster
(fca)

8 years agoMove the calibration macros to PWG1 (Marian)
hristov [Fri, 15 Apr 2011 07:44:12 +0000]
Move the calibration macros to PWG1 (Marian)

8 years agoKeep also the events with cosmic tracks (Marian)
hristov [Fri, 15 Apr 2011 07:34:50 +0000]
Keep also the events with cosmic tracks (Marian)

8 years agoremoved possibility to choose channels for stability
alla [Fri, 15 Apr 2011 06:25:58 +0000]
removed possibility to choose channels for stability

8 years agoAdded possibility to show the trend of calibrations of single SDD modules
prino [Thu, 14 Apr 2011 23:11:35 +0000]
Added possibility to show the trend of calibrations of single SDD modules

8 years agoFix in SDD correction maps for cases of negative drift length
prino [Thu, 14 Apr 2011 22:52:30 +0000]
Fix in SDD correction maps for cases of negative drift length

8 years ago- added the new function call that sets the pass for the centrality task
kkanaki [Thu, 14 Apr 2011 22:35:22 +0000]
- added the new function call that sets the pass for the centrality task

8 years ago- synchronized the overlay macro to the changes of the drawing one
kkanaki [Thu, 14 Apr 2011 20:50:21 +0000]
- synchronized the overlay macro to the changes of the drawing one
  (although draTHnSparse.C provides the same functionality)
- changed the max Pt range according to the value defined in the CB task
- added functionality to define the X axis range for overlaying histograms

8 years ago- removed method plotAid, its functionality has been moved to other functions
kkanaki [Thu, 14 Apr 2011 16:41:22 +0000]
- removed method plotAid, its functionality has been moved to other functions
- reduced the number of arguments in several methods
- the canvases are now created and filled inside the functions and under conditions
  that the respective THnSparse objects have non-zero entries
- the canvas with the overlaid histograms is created and filled only when there is more than one
  set of cuts to be studied
- added a canvas with overlaid track distributions for the offline tracks too
- took care of the way the statistics boxes are printed, now entries, mean and RMS appear

8 years agoMinor change in SetLaddersOnLayer2 to speed-up the code
masera [Thu, 14 Apr 2011 16:25:28 +0000]
Minor change in SetLaddersOnLayer2 to speed-up the code

8 years agoQA updates
snelling [Thu, 14 Apr 2011 16:20:51 +0000]
QA updates

8 years agoClean at the end of loop
loizides [Thu, 14 Apr 2011 16:15:18 +0000]
Clean at the end of loop

8 years agoMisplaced initialisation of ntimes corrected.
morsch [Thu, 14 Apr 2011 16:14:07 +0000]
Misplaced initialisation of ntimes corrected.

8 years agofixing backward incompatible operator=, check for existence of fEventPlaneP
kleinb [Thu, 14 Apr 2011 14:56:30 +0000]
fixing backward incompatible operator=, check for existence of fEventPlaneP

8 years ago-- changes for mean pT vs multiplicity studies (M. Knichel)
jotwinow [Thu, 14 Apr 2011 13:52:40 +0000]
-- changes for mean pT vs multiplicity studies (M. Knichel)
M    dNdPt/AlidNdPtAnalysis.h
M    dNdPt/AlidNdPtAnalysis.cxx

8 years agoNew track selection and new track matching
loizides [Thu, 14 Apr 2011 13:10:35 +0000]
New track selection and new track matching

8 years agoNew macro to print SDD configuration from JTAG hex files
prino [Thu, 14 Apr 2011 12:46:23 +0000]
New macro to print SDD configuration from JTAG hex files

8 years agoMinor fixes in SDD macros
prino [Thu, 14 Apr 2011 12:43:52 +0000]
Minor fixes in SDD macros

8 years agoOptionally the log term of Rossi parameterization for mult.scattering can be
shahoian [Thu, 14 Apr 2011 10:43:27 +0000]
Optionally the log term of Rossi parameterization for mult.scattering can be
accounted by SetUseLogTermMS static method. The default behaviour did not
change (no log term).

8 years ago- changed the min range for track multiplicity
kkanaki [Thu, 14 Apr 2011 09:50:21 +0000]
- changed the min range for track multiplicity

8 years ago- Macro to create the "raw" data file with selected events
marian [Thu, 14 Apr 2011 09:21:26 +0000]
- Macro to create the "raw" data file with selected events
Magnus

-This line, and those below, will be ignored--

A    rawmerge.C

8 years agousing common base class functions to access OCDB objects
richterm [Thu, 14 Apr 2011 09:14:51 +0000]
using common base class functions to access OCDB objects

8 years agooptimizing access to OCDB objects https://savannah.cern.ch/bugs/?80488, adding more...
richterm [Thu, 14 Apr 2011 09:11:26 +0000]
optimizing access to OCDB objects https://savannah.cern.ch/bugs/?80488, adding more error messages to the helper functions

8 years agoAdded OADB as external library dependency to ANALYSISalice. OADB will get automatical...
agheata [Thu, 14 Apr 2011 09:07:26 +0000]
Added OADB as external library dependency to ANALYSISalice. OADB will get automatically loaded when trying to load ANALYSISalice

8 years ago- broaden the pt range that is filled in the track THnSparse
kkanaki [Thu, 14 Apr 2011 08:41:09 +0000]
- broaden the pt range that is filled in the track THnSparse
- small comment about the use of GetEventSpecie() for HLT data

8 years agoUsing At instead of UncheckedAt (Marian)
hristov [Thu, 14 Apr 2011 08:22:42 +0000]
Using At instead of UncheckedAt (Marian)

8 years agodeclaring some getters const
richterm [Thu, 14 Apr 2011 06:14:28 +0000]
declaring some getters const

8 years agoincluding -dataspec option in the configuration for file publisher
richterm [Thu, 14 Apr 2011 06:13:06 +0000]
including -dataspec option in the configuration for file publisher

8 years agomoving internal initialization and allocation from constructor to DoInit
richterm [Thu, 14 Apr 2011 06:11:56 +0000]
moving internal initialization and allocation from constructor to DoInit

8 years agoWarnings fixed
mrodrigu [Thu, 14 Apr 2011 03:18:37 +0000]
Warnings fixed

8 years agocovery
snelling [Wed, 13 Apr 2011 19:02:30 +0000]
covery

8 years agoUpdating EMCAL configuration for test setup.
zampolli [Wed, 13 Apr 2011 17:58:17 +0000]
Updating EMCAL configuration for test setup.

8 years agoforgot use collision option
gconesab [Wed, 13 Apr 2011 17:20:50 +0000]
forgot use collision option

8 years agoupdate some settings, add option depending on year, collision type, output file name
gconesab [Wed, 13 Apr 2011 17:16:11 +0000]
update some settings, add option depending on year, collision type, output file name

8 years agoLoading libOADB in the generated macros of the plugin
agheata [Wed, 13 Apr 2011 15:27:41 +0000]
Loading libOADB in the generated macros of the plugin

8 years agodo not divide chi2 by ndf, can be done later and need to check with Marian
kleinb [Wed, 13 Apr 2011 15:22:14 +0000]
do not divide chi2 by ndf, can be done later and need to check with Marian

8 years agoNew feature to plot raw data of single module
prino [Wed, 13 Apr 2011 15:19:21 +0000]
New feature to plot raw data of single module

8 years agoChanges for #80876: Change in AliTOFPIDResponse
hristov [Wed, 13 Apr 2011 15:16:45 +0000]
Changes for #80876: Change in AliTOFPIDResponse

8 years agoUpdated drift gas. It's Ne-CO2 90/10 now.
kowal2 [Wed, 13 Apr 2011 14:57:52 +0000]
Updated drift gas. It's Ne-CO2 90/10 now.

8 years agoUpdate by A. Matyja
kowal2 [Wed, 13 Apr 2011 13:22:44 +0000]
Update by A. Matyja

8 years agoAdding support for the fast cluster to the physics selection
jgrosseo [Wed, 13 Apr 2011 13:17:26 +0000]
Adding support for the fast cluster to the physics selection