From a584e4273fb229f790c7d5d6cb2a99f0c6847746 Mon Sep 17 00:00:00 2001 From: hristov Date: Tue, 12 Jun 2001 07:41:51 +0000 Subject: [PATCH] ConfigPPR.C removed to avoid confusions with Config.C. Config.C contains all the information for PPR --- macros/ConfigPPR.C | 317 --------------------------------------------- 1 file changed, 317 deletions(-) delete mode 100644 macros/ConfigPPR.C diff --git a/macros/ConfigPPR.C b/macros/ConfigPPR.C deleted file mode 100644 index 1bab270357c..00000000000 --- a/macros/ConfigPPR.C +++ /dev/null @@ -1,317 +0,0 @@ -void Config() -{ - // - // Set Random Number seed - gRandom->SetSeed(12345); - - // ThetaRange is (0., 180.). It was (0.28,179.72) 7/12/00 09:00 - new AliGeant3("C++ Interface to Geant3"); - - //======================================================================= - // Create the output file - - TFile *rootfile = new TFile("galice.root","recreate"); - rootfile->SetCompressionLevel(2); - TGeant3 *geant3 = (TGeant3*)gMC; - - // - // Set External decayer - AliDecayer* decayer = new AliDecayerPythia(); - decayer->SetForceDecay(kAll); - decayer->Init(); - gMC->SetExternalDecayer(decayer); - - // - // - //======================================================================= - // ******* GEANT STEERING parameters FOR ALICE SIMULATION ******* - geant3->SetTRIG(1); //Number of events to be processed - geant3->SetSWIT(4,10); - geant3->SetDEBU(0,0,1); - //geant3->SetSWIT(2,2); - geant3->SetDCAY(1); - geant3->SetPAIR(1); - geant3->SetCOMP(1); - geant3->SetPHOT(1); - geant3->SetPFIS(0); - geant3->SetDRAY(0); - geant3->SetANNI(1); - geant3->SetBREM(1); - geant3->SetMUNU(1); - geant3->SetCKOV(1); - geant3->SetHADR(1); //Select pure GEANH (HADR 1) or GEANH/NUCRIN (HADR 3) - geant3->SetLOSS(2); - geant3->SetMULS(1); - geant3->SetRAYL(1); - geant3->SetAUTO(1); //Select automatic STMIN etc... calc. (AUTO 1) or manual (AUTO 0) - geant3->SetABAN(0); //Restore 3.16 behaviour for abandoned tracks - geant3->SetOPTI(2); //Select optimisation level for GEANT geometry searches (0,1,2) - geant3->SetERAN(5.e-7); - - Float_t cut = 1.e-3; // 1MeV cut by default - Float_t tofmax = 1.e10; - // GAM ELEC NHAD CHAD MUON EBREM MUHAB EDEL MUDEL MUPA TOFMAX - geant3->SetCUTS(cut,cut, cut, cut, cut, cut, cut, cut, cut, cut, tofmax); - // - //======================================================================= - // ************* STEERING parameters FOR ALICE SIMULATION ************** - // --- Specify event type to be tracked through the ALICE setup - // --- All positions are in cm, angles in degrees, and P and E in GeV - AliGenHIJINGpara *gener = new AliGenHIJINGpara(84210); - gener->SetMomentumRange(0,999); - gener->SetPhiRange(0,360); - // gener->SetThetaRange(0.28,179.72); - gener->SetThetaRange(0.,180.); - gener->SetOrigin(0,0,0); //vertex position - gener->SetSigma(0,0,0); //Sigma in (X,Y,Z) (cm) on IP position - gener->Init(); - // - // Activate this line if you want the vertex smearing to happen - // track by track - // - //gener->SetVertexSmear(perTrack); - - gAlice->SetField(-999,2); //Specify maximum magnetic field in Tesla (neg. ==> default field) - - Int_t iABSO=1; - Int_t iCASTOR=1; - Int_t iDIPO=1; - Int_t iFMD=1; - Int_t iFRAME=1; - Int_t iHALL=1; - Int_t iITS=1; - Int_t iMAG=1; - Int_t iMUON=1; - Int_t iPHOS=1; - Int_t iPIPE=1; - Int_t iPMD=1; - Int_t iRICH=1; - Int_t iSHIL=1; - Int_t iSTART=1; - Int_t iTOF=1; - Int_t iTPC=1; - Int_t iTRD=1; - Int_t iZDC=1; - - //=================== Alice BODY parameters ============================= - AliBODY *BODY = new AliBODY("BODY","Alice envelop"); - - if(iMAG) { - //=================== MAG parameters ============================ - // --- Start with Magnet since detector layouts may be depending --- - // --- on the selected Magnet dimensions --- - AliMAG *MAG = new AliMAG("MAG","Magnet"); - } - - - if(iABSO) { - //=================== ABSO parameters ============================ - AliABSO *ABSO = new AliABSOv0("ABSO","Muon Absorber"); - } - - if(iDIPO) { - //=================== DIPO parameters ============================ - - AliDIPO *DIPO = new AliDIPOv2("DIPO","Dipole version 2"); - } - - if(iHALL) { - //=================== HALL parameters ============================ - - AliHALL *HALL = new AliHALL("HALL","Alice Hall"); - } - - - if(iFRAME) { - //=================== FRAME parameters ============================ - - AliFRAME *FRAME = new AliFRAMEv2("FRAME","Space Frame"); - - } - - if(iSHIL) { - //=================== SHIL parameters ============================ - - AliSHIL *SHIL = new AliSHILv0("SHIL","Shielding"); - } - - - if(iPIPE) { - //=================== PIPE parameters ============================ - - AliPIPE *PIPE = new AliPIPEv0("PIPE","Beam Pipe"); - } - - - if(iITS) { - -//=================== ITS parameters ============================ - // - // As the innermost detector in ALICE, the Inner Tracking System "impacts" on - // almost all other detectors. This involves the fact that the ITS geometry - // still has several options to be followed in parallel in order to determine - // the best set-up which minimizes the induced background. All the geometries - // available to date are described in the following. Read carefully the comments - // and use the default version (the only one uncommented) unless you are making - // comparisons and you know what you are doing. In this case just uncomment the - // ITS geometry you want to use and run Aliroot. - // - // Detailed geometries: - // - // - //AliITS *ITS = new AliITSv5symm("ITS","Updated ITS TDR detailed version with symmetric services"); - // - //AliITS *ITS = new AliITSv5asymm("ITS","Updates ITS TDR detailed version with asymmetric services"); - // - AliITSvPPRasymm *ITS = new AliITSvPPRasymm("ITS","New ITS PPR detailed version with asymmetric services"); - ITS->SetMinorVersion(2); // don't touch this parameter if you're not an ITS developer - ITS->SetReadDet(kFALSE); // don't touch this parameter if you're not an ITS developer - ITS->SetWriteDet("$ALICE_ROOT/ITS/ITSgeometry_vPPRasymm2.det"); // don't touch this parameter if you're not an ITS developer - ITS->SetThicknessDet1(300.); // detector thickness on layer 1 must be in the range [100,300] - ITS->SetThicknessDet2(300.); // detector thickness on layer 2 must be in the range [100,300] - ITS->SetThicknessChip1(300.); // chip thickness on layer 1 must be in the range [150,300] - ITS->SetThicknessChip2(300.); // chip thickness on layer 2 must be in the range [150,300] - ITS->SetRails(1); // 1 --> rails in ; 0 --> rails out - ITS->SetCoolingFluid(1); // 1 --> water ; 0 --> freon - // - //AliITSvPPRsymm *ITS = new AliITSvPPRsymm("ITS","New ITS PPR detailed version with symmetric services"); - //ITS->SetMinorVersion(2); // don't touch this parameter if you're not an ITS developer - //ITS->SetReadDet(kFALSE); // don't touch this parameter if you're not an ITS developer - //ITS->SetWriteDet("$ALICE_ROOT/ITS/ITSgeometry_vPPRsymm2.det"); // don't touch this parameter if you're not an ITS developer - //ITS->SetThicknessDet1(300.); // detector thickness on layer 1 must be in the range [100,300] - //ITS->SetThicknessDet2(300.); // detector thickness on layer 2 must be in the range [100,300] - //ITS->SetThicknessChip1(300.); // chip thickness on layer 1 must be in the range [150,300] - //ITS->SetThicknessChip2(300.); // chip thickness on layer 2 must be in the range [150,300] - //ITS->SetRails(1); // 1 --> rails in ; 0 --> rails out - //ITS->SetCoolingFluid(1); // 1 --> water ; 0 --> freon - // - // - // Coarse geometries (warning: no hits are produced with these coarse geometries and they unuseful - // for reconstruction !): - // - // - //AliITSvPPRcoarseasymm *ITS = new AliITSvPPRcoarseasymm("ITS","New ITS PPR coarse version with asymmetric services"); - //ITS->SetRails(1); // 1 --> rails in ; 0 --> rails out - //ITS->SetSupportMaterial(0); // 0 --> Copper ; 1 --> Aluminum ; 2 --> Carbon - // - //AliITS *ITS = new AliITSvPPRcoarsesymm("ITS","New ITS PPR coarse version with symmetric services"); - //ITS->SetRails(1); // 1 --> rails in ; 0 --> rails out - //ITS->SetSupportMaterial(0); // 0 --> Copper ; 1 --> Aluminum ; 2 --> Carbon - // - // - // - // Geant3 <-> EUCLID conversion - // ============================ - // - // SetEUCLID is a flag to output (=1) or not to output (=0) both geometry and - // media to two ASCII files (called by default ITSgeometry.euc and - // ITSgeometry.tme) in a format understandable to the CAD system EUCLID. - // The default (=0) means that you dont want to use this facility. - // - ITS->SetEUCLID(0); - } - - - if(iTPC) { - //============================ TPC parameters ================================ - // --- This allows the user to specify sectors for the SLOW (TPC geometry 2) - // --- Simulator. SecAL (SecAU) <0 means that ALL lower (upper) - // --- sectors are specified, any value other than that requires at least one - // --- sector (lower or upper)to be specified! - // --- Reminder: sectors 1-24 are lower sectors (1-12 -> z>0, 13-24 -> z<0) - // --- sectors 25-72 are the upper ones (25-48 -> z>0, 49-72 -> z<0) - // --- SecLows - number of lower sectors specified (up to 6) - // --- SecUps - number of upper sectors specified (up to 12) - // --- Sens - sensitive strips for the Slow Simulator !!! - // --- This does NOT work if all S or L-sectors are specified, i.e. - // --- if SecAL or SecAU < 0 - // - // - //----------------------------------------------------------------------------- - - // gROOT->LoadMacro("SetTPCParam.C"); - // AliTPCParam *param = SetTPCParam(); - AliTPC *TPC = new AliTPCv2("TPC","Default"); - // All sectors included - TPC->SetSecAL(-1); - TPC->SetSecAU(-1); - - } - - - if(iTOF) { - //=================== TOF parameters ============================ - AliTOF *TOF = new AliTOFv2("TOF","normal TOF"); - } - - if(iRICH) { - //=================== RICH parameters =========================== - AliRICH *RICH = new AliRICHv1("RICH","normal RICH"); - - } - - - if(iZDC) { - //=================== ZDC parameters ============================ - - AliZDC *ZDC = new AliZDCv1("ZDC","normal ZDC"); - } - - if(iCASTOR) { - //=================== CASTOR parameters ============================ - - AliCASTOR *CASTOR = new AliCASTORv1("CASTOR","normal CASTOR"); - } - - if(iTRD) { - //=================== TRD parameters ============================ - - AliTRD *TRD = new AliTRDv1("TRD","TRD slow simulator"); - - // Select the gas mixture (0: 97% Xe + 3% isobutane, 1: 90% Xe + 10% CO2) - TRD->SetGasMix(1); - - // With hole in front of PHOS - TRD->SetPHOShole(); - // With hole in front of RICH - TRD->SetRICHhole(); - // Switch on TR - AliTRDsim *TRDsim = TRD->CreateTR(); - } - - if(iFMD) { - //=================== FMD parameters ============================ - - AliFMD *FMD = new AliFMDv0("FMD","normal FMD"); - } - - if(iMUON) { - //=================== MUON parameters =========================== - AliMUON *MUON = new AliMUONv1("MUON","default"); - } - - //=================== PHOS parameters =========================== - - if(iPHOS) { - AliPHOS *PHOS = new AliPHOSv1("PHOS","GPS2"); - } - - - if(iPMD) { - //=================== PMD parameters ============================ - - AliPMD *PMD = new AliPMDv1("PMD","normal PMD"); - PMD->SetPAR(1., 1., 0.8, 0.02); - PMD->SetIN(6., 18., -580., 27., 27.); - PMD->SetGEO(0.0, 0.2, 4.); - PMD->SetPadSize(0.8, 1.0, 1.0, 1.5); - - } - - if(iSTART) { - //=================== START parameters ============================ - AliSTART *START = new AliSTARTv1("START","START Detector"); - } - - -} -- 2.39.3