bugfix

[check_openmanage.git] / CHANGES

3.5.2   2009-11-17
------------------

* Fix for undefined device name for logical drives (thanks to Pontus
  Fuchs for a patch)
* Fixed a bug in the PNP4Nagios template, that prevented the template
  from working with PNP4Nagios 0.6. Thanks to the PNP4Nagios team for
  the fix.
* Other small fixes

3.5.1   2009-10-22
------------------

* CPU type, family etc. are now reported in case of a CPU failure (and
  in the debug output)
* The debug output now reports Openmanage version and plugin version


3.5.0   2009-10-13
------------------

* New option '-a' or '--all' turns on checking of everything
* The manual page (POD info) is removed from the script and is now in
  a separate file, to make check_openmanage fully ePN compatible
* ePN is no longer disabled by default, check_openmanage no longer has
  an opinion on whether it should run under ePN or not
* The '-m' or '--man' option is no longer available
* The option '-v' or '--verbose' is renamed to '-d' or '--debug',
  which makes more sense wrt. its usage
* The '-g' or '--global' option is removed. Checking the global health
  status is now default if applicable
* Checking intrusion detection is now turned on by default
* The obsolete option '--snmp' is removed
* The option '--state' now has a shorter equivalent '-s'
* The basename stuff and options '--only-critical' and
  '--only-warning' are now replaced by an option '--only'
* If plugin is run by Nagios, redirect stderr to stdout
* Added option '--omreport', that lets the user specify the full path
  to the omreport binary
* Added non-8bit-legacy default search paths for omreport.exe for
  Windows boxen
* Minor changes to the plugin output, for consistency
* New blacklisting keyword 'bat_charge' disables warning messages
  related to controller cache battery charging. Thanks to Robert
  Heinzmann for a patch.
* For blacklisting, the component ID kan now be "ALL", in which all
  components of that type is blacklisted.
* Man page is moved to manual section 8


3.4.9   2009-08-07
------------------

* Fixed a bug that could cause errors and weird results when checking
  cooling devices (fans) via SNMP. Thanks to Ken McKinlay for spotting
  this bug and reporting it.

3.4.8   2009-07-31
------------------

* For failed physical drives, check_openmanage will now output the
  drive's vendor, model and size in GB or TB.

3.4.7   2009-07-24
------------------

* The -s|--snmp option was redundant and no longer does anything. SNMP
  is triggered automatically if the -H|--hostname option is
  present. The -s|--snmp option is kept for compatibility, but has no
  effect.

3.4.6   2009-07-07
------------------

* Added support for performance data (temperatures) from attached
  storage enclosures such as the MD1000

3.4.5   2009-06-22
------------------

* Fixed a regression in the --htmlinfo option when it is not supplied
  with an argument

3.4.4   2009-06-22
------------------

* New option --htmlinfo adds clickable HTML links in the plugin's
  output

3.4.3   2009-06-11
------------------

* Fixed a regression bug in CPU and power supply reporting that only
  affects verbose output
* If blacklisting is used, the global health check (via the --global
  option) is now negated. Checking the global health doesn't make
  sense when one or more components is blacklisted. Thanks to Rene
  Beaulieu for reporting this bug
* The PNP4Nagios template is now included in the tarball and zip
  archive

3.4.2   2009-06-03
------------------

* Improved memory error reporting, when using omreport
* Collect performance data from pwrmonitoring (amperage probes) that
  were previously ignored when using omreport

3.4.1   2009-05-25
------------------

* Improved memory error reporting, when using SNMP
* Other small ehnancements

3.4.0   2009-05-25
------------------

* The plugin is now compatible with the Nagios embedded Perl
  interpreter (ePN) in theory. However, the plugin will not not use
  ePN by default. We don't want any "accidents".
* License is now GPLv3, previously only specified as "GPL"
* New options --only-critical and --only-warning. With these options
  the plugin will only print critical or warning alerts, respectively.
* Bugfixes and speed enhancements in the storage section, when
  checking enclosure components via omreport
* The --okinfo option is now less verbose and more to the point
* Lots of code refactoring for readability, maintainability and
  robustness

3.3.2   2009-05-05
------------------

* Fixed a bug in the storage section, when checking controllers. This
  is an obscure bug that only manifests itself in the odd case where a
  server has multiple controllers, and one of the controllers are
  missing some of the OIDs, in which case these OIDs will be missing
  for the other controllers as well. The change is minor and only
  includes using get_table() instead of get_entries() to collect the
  SNMP result. Thanks to Stephan Bovet for reporting this bug.

3.3.1   2009-04-28
------------------

* The --perfdata option can now optionally take an argument
  "multiline", which makes the plugin produce multiline performance
  data output in a Nagios 3.x way. Not really needed, but the plugin
  output is prettier.
* Added comment within the 10 first lines to disable the nagios
  embedded perl (ePN) interpreter by default for Nagios 3.x
* Improvements in the performance data output. Units are now included

3.3.0   2009-04-07
------------------

* Added --global option, which turns on checking of everything. If
  used with SNMP, the global system health status is also probed, to
  protect the user against bugs in the plugin. If used with omreport,
  the overall chassis health is used.
* Support for SNMP version 3
* New check added: esmhealth. This checks the overall health of the
  ESM log, i.e. the fill grade. More than 80% means a warning message
* Fixed alert log reporting to use the same format as for the ESM log
* Output messages are now sorted by severity
* Minor changes in how out-of-date controller firmware/driver is
  reported
* Code refactoring and cleanup

3.2.7   2009-03-29
------------------

* Use "omreport about" to collect OMSA version. Slightly faster than
  "omreport system version". This should give a small speedup in
  certain configurations
* Fixed typo in output when a logical drive is rebuilding. Thanks to
  Andreas Olsson for reporting
* Improved reporting of ESM log content
* Added omreport.sh as alternate omreport path
* Lots of other small fixes and enhancements

Plus: A few changes to make the plugin work with old PowerEdge models
(e.g. 2550, 2450) and/or old OMSA versions (e.g. version 4.5):

* Use the chassisModelName OID to determine if SNMP works (instead of
  BaseboardType)
* No longer require a response when checking baseboard type via
  SNMP. If there is no response, we assume that we're not dealing with
  a blade server

Thanks to Christian McHugh for help with testing and debugging this
stuff

3.2.6   2009-03-05
------------------

* Use 'omreport system operatingsystem' to collect OS info, instead of
  'omreport system' version which is incredibly slow. This should speed
  things up in certain configurations.
* A few speedups, don't collect information that isn't needed
* Man page fixes

3.2.5   2009-02-24
------------------

* New option --linebreak to specify the separator between line in case
  of multiline output
* Added support for 64bit Windows. Thanks to Patrick Hemmen for a patch
* [Patrick Hemmen] Added install.bat for Windows installation
* [Patrick Hemmen] Improvements on install.sh. Will now install in
  /usr/lib64 for x86_64
* RPMs are now architecture dependent, because of different libdir

3.2.4   2009-02-17
------------------

* New option -o|--ok-info to display extra information when everything
  is ok. The plugin can now display storage firmware and driver info,
  DRAC and BMC firmware, and OMSA version
* Support for setting custom minimum temperature thresholds via the
  -c|--critical and -w|--warning options
* Better and more detailed temperature error reporting
* Bugfix in the amperage report (including performance data). The
  plugin now takes into account the correct unit and measurement for
  amperage probes (other than watts)
* New option --port lets the user specify the remote SNMP port number

3.2.3   2009-02-09
------------------

* Regression fix: Use the older Processor Device SNMP OIDs for older
  PowerEdge models, that don't have the new Processor Device Status
  OIDs. Thanks to Nicole Hähnel for reporting this bug.
* Default output (when there are no alerts) now shows RAC firmware,
  BMC firmware, info about controllers and enclosures (firmware,
  driver).

3.2.2   2009-02-03
------------------

* Regression fix: Ignore unoccupied CPU slots with SNMP probing. This
  fixes a bug introduced in versjon 3.2.1, which would output
  something like this if one or more CPU slots were empty: CPU 1 needs
  attention ()

3.2.1   2009-02-03
------------------

* Use Processor Device Status Table OIDs instead of Processor Device
  Table when checking CPUs via SNMP
* Bugfix: don't report throttled CPUs as warnings when checking via
  SNMP (same as for checking locally)

3.2.0   2009-01-27
------------------

* New options --state and --short-state for displaying service state
  along with the alert
* Lots of small fixes for code readability and maintainability

3.1.1   2009-01-12
------------------

* Support for running natively on Windows (using omreport.exe). Thanks
  to Peter Jestico for a patch.
* Support for compiled Windows version, i.e. check_openmanage.exe is
  now a legal script name.
* Exit with error if script basename is illegal/unknown
* Various small fixes

3.1.0   2008-12-26
------------------

* Use of alternate basenames for checking only one class of components
* Added support for checking the ESM log via SNMP
* Code refactoring for robustness and maintainability
* Numerous small fixes and enhancements
* Added install script in distribution tarball

3.0.2   2008-12-20
------------------

* The script no longer aborts if it can't get system information via
  SNMP. Give a warning instead, as this is not a critical error
* Increased robustness when checking controllers

3.0.1   2008-12-11
------------------

* Man page fix in the 'check' section. Thanks to Ansgar Dahlen for
  reporting this.
* Allow invalid command error from 'omreport chassis pwrmonitoring'
* Various small fixes

3.0.0   2008-12-04
------------------

* Use unique IDs for storage components with regard to blacklisting,
  which means that the blacklisting API has changed
* Added checks for storage components: connectors (channels),
  enclosures, enclosure fans, enclosure power supplies, enclosure
  temperature probes and enclosure management modules (EMMs)
* Improved verbose output
* New option -t|--timeout for setting the plugin timeout
* New option -w|--warning for setting custom temperature warning
  thresholds
* New option -c|--critical for setting custom temperature critical
  thresholds
* Option --check can no longer be specified in its short form (-c)
* Code cleanup and improvements

2.1.1   2008-11-24
------------------

* The workaround for the OMSA bug introduced in OMSA 5.5.0 didn't take
  multiple controllers into account. This has been fixed.

2.1.0   2008-11-19
------------------

* New option -i|--info prefixes all alerts with the service tag
* New option -e|--extinfo gives and extra line of output in case of an
  alert (model and service tag)
* New option --postmsg lets the user specify a post message string,
  with info such as model, service tag etc.
* Options -b|--blacklist and -c|--check can now be specified multiple
  times (actually quite useful)

2.0.9   2008-11-17
------------------

* Slightly improved output for alerts on logical drives (vdisks)
* Now shows a rebuilding physical disk as a warning, as this is
  usually accompanied by a degraded vdisk. Previous versions didn't
  show this at all (omreport classifies it as "OK").

2.0.8   2008-11-14
------------------

* Slightly improved output for charging controller batteries

2.0.7   2008-11-12
------------------

* Bugfix for reporting physical drives with predictive failure (both
  via NRPE and SNMP)

2.0.6   2008-10-30
------------------

* Fix bug in option handling (ambiguous options)
* Slightly improved output if checking the storage subsystem is turned
  off
* Don't complain if there are no logical drives. This is OK. Thanks to
  Jamie Henderson for reporting this

2.0.5   2008-10-29
------------------

* Fix bug in SNMP status level table

2.0.4   2008-10-29
------------------

* Added workaround for a BUG introduced in OpenManage 5.5.0. OM
  sometimes adds a newline in the controller driver version name,
  which leads to problems parsing the output. Thanks to Hiren Patel
  for bringing this to my attention.

2.0.3   2008-10-28
------------------

* (snmp) Improved handling of cases where OM is not working properly

2.0.2   2008-10-27
------------------

* Fixed issue where controller number for physical disks can't be
  established via SNMP (now identifies as controller no. -1)

2.0.1   2008-10-23
------------------

* Correctly identifies and reports error condition in which OpenManage
  has stopped working (it happens)

2.0.0   2008-10-23
------------------

* SNMP support
* Same options for checking, blacklisting etc. supported with SNMP
* Same output with SNMP as with NRPE

1.2.1   2008-09-25
------------------

* Collects performance data if the option '-p' or '--perfdata' is
  supplied.
* New blacklisting directives ctrl_fw and ctrl_driver
  added. Suppresses the "special" warning messages concerning outdated
  controller firmware and driver. Useful if you can't or won't
  upgrade.

1.1.2   2008-08-06
------------------

* Fix getting system model and serial number for newer blades

1.1.1   2008-08-06
------------------

* Three new checks added:
  - System battery probes (typical CMOS battery). Newer poweredge
    models have these
  - Power consumption monitoring (if the server supports it)
  - ESM log, with same functionality as the alert log check. Disabled
    by default.

1.1.0   2008-08-04
------------------

* Internal refactoring: use ssv-formatted output from openmanage,
  resulting in slightly faster execution and increased robustness.
* If /usr/bin/omreport doesn't exist, try
  /opt/dell/srvadmin/oma/bin/omreport.
* Allow for no instrumented/redundant power supplies. Needed on
  low-end poweredge models and blades.

1.0.3   2008-07-25
------------------

* Openmanage reports non-critical warning about throttled CPUs on new
  hardware models. Most og us use ondemand CPU frequency scaling (with
  throttled CPUs as a result). This specific non-critical warning (CPU
  Throttled) is ignored from now on.
* Remove superfluous Celcius sign when reporting temperatures.

1.0.2   2008-07-25
------------------

* Accommodate blade systems with no fans or powersupplies, i.e. accept
  errors from omreport when trying to check fans or powersupplies on
  blade servers.
* Accommodate newer hardware with slightly different omreport
  options. Use the newer options if they exist. Not really necessary
  yet, but deprecated options may be removed in future versions of
  Dell OpenManage.

1.0.1   2008-07-18
------------------

* When everything is OK, check_openmanage now outputs the same info as
  Gerhard Lausser's excellent check_hpasm plugin does for HP servers:

  OK - System: 'poweredge 2850', S/N: 'XXXXXXX', ROM: 'A06
  10/03/2006', hardware working fine, 2 logical drives, 4 physical
  drives

1.0.0   2008-07-15
------------------

* Initial release