\usepackage{lmodern} % using Latin Modern to be able to use bold typewriter font
\urlstyle{sf}
\usepackage{listings}
+\usepackage{tabularx}
+\usepackage{tikz}
+\usepackage{tikz-qtree}
+\usetikzlibrary{shapes,snakes,trees,arrows,shadows,positioning,calc}
\usepackage{babel,textcomp,csquotes,ifimasterforside,varioref}
\usepackage[hidelinks]{hyperref}
\usepackage{cleveref}
#2\\*\emph{How:} #3\\*[-7px]}
%\newcommand{\type}[1]{\lstinline{#1}}
-\newcommand{\type}[1]{\texttt{\textbf{#1}}}
+\newcommand{\code}[1]{\texttt{\textbf{#1}}}
+\newcommand{\type}[1]{\code{#1}}
\newcommand{\typeref}[1]{\footnote{\type{#1}}}
\newcommand{\typewithref}[2]{\type{#2}\typeref{#1.#2}}
\newcommand{\method}[1]{\type{#1}}
\bibliography{bibliography/master-thesis-erlenkr-bibliography}
+ % UML comment in TikZ:
+ % ref: https://tex.stackexchange.com/questions/103688/folded-paper-shape-tikz
+\makeatletter
+\pgfdeclareshape{umlcomment}{
+ \inheritsavedanchors[from=rectangle] % this is nearly a rectangle
+ \inheritanchorborder[from=rectangle]
+ \inheritanchor[from=rectangle]{center}
+ \inheritanchor[from=rectangle]{north}
+ \inheritanchor[from=rectangle]{south}
+ \inheritanchor[from=rectangle]{west}
+ \inheritanchor[from=rectangle]{east}
+ % ... and possibly more
+ \backgroundpath{% this is new
+ % store lower right in xa/ya and upper right in xb/yb
+ \southwest \pgf@xa=\pgf@x \pgf@ya=\pgf@y
+ \northeast \pgf@xb=\pgf@x \pgf@yb=\pgf@y
+ % compute corner of ‘‘flipped page’’
+ \pgf@xc=\pgf@xb \advance\pgf@xc by-10pt % this should be a parameter
+ \pgf@yc=\pgf@yb \advance\pgf@yc by-10pt
+ % construct main path
+ \pgfpathmoveto{\pgfpoint{\pgf@xa}{\pgf@ya}}
+ \pgfpathlineto{\pgfpoint{\pgf@xa}{\pgf@yb}}
+ \pgfpathlineto{\pgfpoint{\pgf@xc}{\pgf@yb}}
+ \pgfpathlineto{\pgfpoint{\pgf@xb}{\pgf@yc}}
+ \pgfpathlineto{\pgfpoint{\pgf@xb}{\pgf@ya}}
+ \pgfpathclose
+ % add little corner
+ \pgfpathmoveto{\pgfpoint{\pgf@xc}{\pgf@yb}}
+ \pgfpathlineto{\pgfpoint{\pgf@xc}{\pgf@yc}}
+ \pgfpathlineto{\pgfpoint{\pgf@xb}{\pgf@yc}}
+ \pgfpathlineto{\pgfpoint{\pgf@xc}{\pgf@yc}}
+ }
+}
+\makeatother
+
+\tikzstyle{comment}=[%
+ draw,
+ drop shadow,
+ fill=white,
+ align=center,
+ shape=document,
+ minimum width=20mm,
+ minimum height=10mm,
+ shape=umlcomment,
+ inner sep=2ex,
+ font=\ttfamily,
+]
+
\begin{document}
\ififorside
\frontmatter{}
\See{hacking_undo_history}
\section{Wishful Thinking}
-
+\todoin{???}
\chapter{Composite Refactorings in Eclipse}
As pointed out in \myref{ch:jdt_refactorings}, the Eclipse JDT refactoring model
is not very well suited for making composite refactorings. Therefore a simple
model using changer objects (of type \type{RefaktorChanger}) is used as an
-abstraction layer on top of the existing Eclipse refactorings.
+abstraction layer on top of the existing Eclipse refactorings, instead of
+extending the \typewithref{org.eclipse.ltk.core.refactoring}{Refactoring} class.
+
+The use of an additional abstraction layer is a deliberate choice. It is due to
+the problem of creating a composite
+\typewithref{org.eclipse.ltk.core.refactoring}{Change} that can handle text
+changes that interfere with each other. Thus, a \type{RefaktorChanger} may, or
+may not, take advantage of one or more existing refactorings, but it is always
+intended to make a change to the workspace.
+
+\subsection{A typical \type{RefaktorChanger}}
+The typical refaktor changer class has two responsibilities, checking
+preconditions and executing the requested changes. This is not too different
+from the responsibilities of an LTK refactoring, with the distinction that a
+refaktor changer also executes the change, while an LTK refactoring is only
+responsible for creating the object that can later be used to do the job.
+
+Checking of preconditions is typically done by an
+\typewithref{no.uio.ifi.refaktor.analyze.analyzers}{Analyzer}. If the
+preconditions validate, the upcoming changes are executed by an
+\typewithref{no.uio.ifi.refaktor.change.executors}{Executor}.
\section{The Extract and Move Method Refactoring}
%The Extract and Move Method Refactoring is implemented mainly using these
unit\typeref{org.eclipse.jdt.core.ICompilationUnit}, the offset into the source
code where the extraction shall start, and the length of the source to be
extracted. Then you have to set the method name for the new method together with
-which access modifier that shall be used and some not so interesting parameters.
+its visibility and some not so interesting parameters.
\subsubsection{The MoveInstanceMethodProcessor Class}
-For the Move Method the processor requires a little more advanced input than
+For the Move Method, the processor requires a little more advanced input than
the class for the Extract Method. For construction it requires a method
-handle\typeref{org.eclipse.jdt.core.IMethod} from the Java Model for the method
-that is to be moved. Then the target for the move have to be supplied as the
-variable binding from a chosen variable declaration. In addition to this, one
-have to set some parameters regarding setters/getters and delegation.
+handle\typeref{org.eclipse.jdt.core.IMethod} for the method that is to be moved.
+Then the target for the move have to be supplied as the variable binding from a
+chosen variable declaration. In addition to this, one have to set some
+parameters regarding setters/getters, as well as delegation.
-To make a whole refactoring from the processor, one have to construct a
-\type{MoveRefactoring} from it.
+To make a working refactoring from the processor, one have to create a
+\type{MoveRefactoring} with it.
\subsection{The ExtractAndMoveMethodChanger Class}
+
The \typewithref{no.uio.ifi.refaktor.changers}{ExtractAndMoveMethodChanger}
-class, that is a subclass of the class
-\typewithref{no.uio.ifi.refaktor.changers}{RefaktorChanger}, is the class
-responsible for composing the \type{ExtractMethodRefactoring} and the
-\type{MoveRefactoring}. Its constructor takes a project
-handle\typeref{org.eclipse.core.resources.IProject}, the method name for the new
-method and a \typewithref{no.uio.ifi.refaktor.utils}{SmartTextSelection}.
-
-A \type{SmartTextSelection} is basically a text
-selection\typeref{org.eclipse.jface.text.ITextSelection} object that enforces
-the providing of the underlying document during creation. I.e. its
-\methodwithref{no.uio.ifi.refaktor.utils.SmartTextSelection}{getDocument} method
-will never return \type{null}.
-
-Before extracting the new method, the possible targets for the move operation is
-found with the help of an
-\typewithref{no.uio.ifi.refaktor.extractors}{ExtractAndMoveMethodPrefixesExtractor}.
-The possible targets is computed from the prefixes that the extractor returns
-from its
-\methodwithref{no.uio.ifi.refaktor.extractors.ExtractAndMoveMethodPrefixesExtractor}{getSafePrefixes}
-method. The changer then choose the most suitable target by finding the most
-frequent occurring prefix among the safe ones. The target is the type of the
-first part of the prefix.
-
-After finding a suitable target, the \type{ExtractAndMoveMethodChanger} first
-creates an \type{ExtractMethodRefactoring} and performs it as explained in
-\myref{executing_refactoring} about the execution of refactorings. Then it
-creates and performs the \type{MoveRefactoring} in the same way, based on the
-changes done by the Extract Method refactoring.
-
-\subsection{The ExtractAndMoveMethodPrefixesExtractor Class}
-This extractor extracts properties needed for building the Extract and Move
-Method refactoring. It searches through the given selection to find safe
-prefixes, and those prefixes form a base that can be used to compute possible
-targets for the move part of the refactoring. It finds both the candidates, in
-the form of prefixes, and the non-candidates, called unfixes. All prefixes (and
-unfixes) are represented by a
+class is a subclass of the class
+\typewithref{no.uio.ifi.refaktor.changers}{RefaktorChanger}. It is responsible
+for analyzing and finding the best target for, and also executing, a composition
+of the Extract Method and Move Method refactorings. This particular changer is
+the one of my changers that is closest to being a true LTK refactoring. It can
+be reworked to be one if the problems with overlapping changes are resolved. The
+changer requires a text selection and the name of the new method, or else a
+method name will be generated. The selection has to be of the type
+\typewithref{no.uio.ifi.refaktor.utils}{CompilationUnitTextSelection}. This
+class is a custom extension to
+\typewithref{org.eclipse.jface.text}{TextSelection}, that in addition to the
+basic offset, length and similar methods, also carry an instance of the
+underlying compilation unit handle for the selection.
+
+\subsubsection{The \type{ExtractAndMoveMethodAnalyzer}}
+The analysis and precondition checking is done by the
+\typewithref{no.uio.ifi.refaktor.analyze.analyzers}{ExtractAnd\-MoveMethodAnalyzer}.
+First is check whether the selection is a valid selection or not, with respect
+to statement boundaries and that it actually contains any selections. Then it
+checks the legality of both extracting the selection and also moving it to
+another class. This checking of is performed by a range of checkers
+\see{checkers}. If the selection is approved as legal, it is analyzed to find
+the presumably best target to move the extracted method to.
+
+For finding the best suitable target the analyzer is using a
+\typewithref{no.uio.ifi.refaktor.analyze.collectors}{PrefixesCollector} that
+collects all the possible candidates for the refactoring. All the non-candidates
+is found by an
+\typewithref{no.uio.ifi.refaktor.analyze.collectors}{UnfixesCollector} that
+collects all the targets that will give some kind of error if used. (For
+details about the property collectors, se \myref{propertyCollectors}.) All
+prefixes (and unfixes) are represented by a
\typewithref{no.uio.ifi.refaktor.extractors}{Prefix}, and they are collected
-into prefix sets.\typeref{no.uio.ifi.refaktor.extractors.PrefixSet}.
-
-The prefixes and unfixes are found by property
-collectors\typeref{no.uio.ifi.refaktor.extractors.collectors.PropertyCollector}.
-A property collector follows the visitor pattern\citing{designPatterns} and is
-of the \typewithref{org.eclipse.jdt.core.dom}{ASTVisitor} type. An
-\type{ASTVisitor} visits nodes in an abstract syntax tree that forms the Java
-document object model. The tree consists of nodes of type
-\typewithref{org.eclipse.jdt.core.do}{ASTNode}.
-
-\subsubsection{The PrefixesCollector}
-The \typewithref{no.uio.ifi.refaktor.extractors.collectors}{PrefixesCollector}
-is of type \type{PropertyCollector}. It visits expression
-statements\typeref{org.eclipse.jdt.core.dom.ExpressionStatement} and creates
-prefixes from its expressions in the case of method invocations. The prefixes
-found is registered with a prefix set, together with all its sub-prefixes.
-\todo{Rewrite in the case of changes to the way prefixes are found}
+into sets of prefixes. The safe prefixes is found by subtracting from the set of
+candidate prefixes the prefixes that is enclosing any of the unfixes. A prefix
+is enclosing an unfix if the unfix is in the set of its sub-prefixes. As an
+example, \texttt{``a.b''} is enclosing \texttt{``a''}, as is \texttt{``a''}. The
+safe prefixes is unified in a \type{PrefixSet}. If a prefix has only one
+occurrence, and is a simple expression, it is considered unsuitable as a move
+target. This occurs in statements such as \texttt{``a.foo()''}. For such
+statements it bares no meaning to extract and move them. It only generates an
+extra method and the calling of it.
+
+\todoin{Clean up sections/subsections.}
+
+\subsubsection{The \type{ExtractAndMoveMethodExecutor}}
+If the analysis finds a possible target for the composite refactoring, it is
+executed by an
+\typewithref{no.uio.ifi.refaktor.change.executors}{ExtractAndMoveMethodExecutor}.
+It is composed of the two executors known as
+\typewithref{no.uio.ifi.refaktor.change.executors}{ExtractMethodRefactoringExecutor}
+and
+\typewithref{no.uio.ifi.refaktor.change.executors}{MoveMethodRefactoringExecutor}.
+The \type{ExtractAndMoveMethodExecutor} is responsible for gluing the two
+together by feeding the \type{MoveMethod\-RefactoringExecutor} with the
+resources needed after executing the extract method refactoring.
+\See{postExtractExecution}
+
+\subsubsection{The \type{ExtractMethodRefactoringExecutor}}
+This executor is responsible for creating and executing an instance of the
+\type{ExtractMethodRefactoring} class. It is also responsible for collecting
+some post execution resources that can be used to find the method handle for the
+extracted method, as well as information about its parameters, including the
+variable they originated from.
+
+\subsubsection{The \type{MoveMethodRefactoringExecutor}}
+This executor is responsible for creating and executing an instance of the
+\type{MoveRefactoring}. The move refactoring is a processor-based refactoring,
+and for the Move Method refactoring it is the \type{MoveInstanceMethodProcessor}
+that is used.
+
+The handle for the method to be moved is found on the basis of the information
+gathered after the execution of the Extract Method refactoring. The only
+information the \type{ExtractMethodRefactoring} is sharing after its execution,
+regarding find the method handle, is the textual representation of the new
+method signature. Therefore it must be parsed, the strings for types of the
+parameters must be found and translated to a form that can be used to look up
+the method handle from its type handle. They have to be on the unresolved
+form.\todo{Elaborate?} The name for the type is found from the original
+selection, since an extracted method must end up in the same type as the
+originating method.
+
+When analyzing a selection prior to performing the Extract Method refactoring, a
+target is chosen. It has to be a variable binding, so it is either a field or a
+local variable/parameter. If the target is a field, it can be used with the
+\type{MoveInstanceMethodProcessor} as it is, since the extracted method still is
+in its scope. But if the target is local to the originating method, the target
+that is to be used for the processor must be among its parameters. Thus the
+target must be found among the extracted method's parameters. This is done by
+finding the parameter information object that corresponds to the parameter that
+was declared on basis of the original target's variable when the method was
+extracted. (The extracted method must take one such parameter for each local
+variable that is declared outside the selection that is extracted.) To match the
+original target with the correct parameter information object, the key for the
+information object is compared to the key from the original target's binding.
+The source code must then be parsed to find the method declaration for the
+extracted method. The new target must be found by searching through the
+parameters of the declaration and choose the one that has the same type as the
+old binding from the parameter information object, as well as the same name that
+is provided by the parameter information object.
+
+
+\subsection{Finding the IMethod}\label{postExtractExecution}
+\todoin{Rename section. Write.}
-\subsubsection{The UnfixesCollector}
-The \typewithref{no.uio.ifi.refaktor.extractors.collectors}{UnfixesCollector}
-finds unfixes within the selection. An unfix is a name that is assigned to
-within the selection. The reason that this cannot be allowed, is that the result
-would be an assignment to the \type{this} keyword, which is not valid in Java.
-
-\subsubsection{Computing Safe Prefixes}
-A safe prefix is a prefix that does not enclose an unfix. A prefix is enclosing
-an unfix if the unfix is in the set of its sub-prefixes. As an example,
-\texttt{``a.b''} is enclosing \texttt{``a''}, as is \texttt{``a''}. The safe
-prefixes is unified in a \type{PrefixSet} and can be fetched calling the
-\method{getSafePrefixes} method of the
-\type{ExtractAndMoveMethodPrefixesExtractor}.
\subsection{The Prefix Class}
-\todo{?}
+This class exists mainly for holding data about a prefix, such as the expression
+that the prefix represents and the occurrence count of the prefix within a
+selection. In addition to this, it has some functionality such as calculating
+its sub-prefixes and intersecting it with another prefix. The definition of the
+intersection between two prefixes is a prefix representing the longest common
+expression between the two.
+
\subsection{The PrefixSet Class}
+A prefix set holds elements of type \type{Prefix}. It is implemented with the
+help of a \typewithref{java.util}{HashMap} and contains some typical set
+operations, but it does not implement the \typewithref{java.util}{Set}
+interface, since the prefix set does not need all of the functionality a
+\type{Set} requires to be implemented. In addition It needs some other
+functionality not found in the \type{Set} interface. So due to the relatively
+limited use of prefix sets, and that it almost always needs to be referenced as
+such, and not a \type{Set<Prefix>}, it remains as an ad hoc solution to a
+concrete problem.
+
+There are two ways adding prefixes to a \type{PrefixSet}. The first is through
+its \method{add} method. This works like one would expect from a set. It adds
+the prefix to the set if it does not already contain the prefix. The other way
+is to \emph{register} the prefix with the set. When registering a prefix, if the
+set does not contain the prefix, it is just added. If the set contains the
+prefix, its count gets incremented. This is how the occurrence count is handled.
+
+The prefix set also computes the set of prefixes that is not enclosing any
+prefixes of another set. This is kind of a set difference operation only for
+enclosing prefixes.
\subsection{Hacking the Refactoring Undo
History}\label{hacking_undo_history}
-\todo{Where to put this section?}
+\todoin{Where to put this section?}
As an attempt to make multiple subsequent changes to the workspace appear as a
single action (i.e. make the undo changes appear as such), I tried to alter
-\chapter{Analyzing Code}
+\chapter{Analyzing Source Code in Eclipse}
+
+\section{The Java model}
+The Java model of Eclipse is its internal representation of a Java project. It
+is light-weight, and has only limited possibilities for manipulating source
+code. It is typically used as a basis for the Package Explorer in Eclipse.
+
+The elements of the Java model is only handles to the underlying elements. This
+means that the underlying element of a handle does not need to actually exist.
+Hence the user of a handle must always check that it exist by calling the
+\method{exists} method of the handle.
+
+The handles with descriptions is listed in \myref{tab:javaModelTable}.
+
+\begin{table}[h]
+ \centering
+
+ \newcolumntype{L}[1]{>{\hsize=#1\hsize\raggedright\arraybackslash}X}%
+ % sum must equal number of columns (3)
+ \begin{tabularx}{\textwidth}{| L{0.7} | L{1.1} | L{1.2} |}
+ \hline
+ \textbf{Project Element} & \textbf{Java Model element} &
+ \textbf{Description} \\
+ \hline
+ Java project & \type{IJavaProject} & The Java project which contains all other objects. \\
+ \hline
+ Source folder /\linebreak[2] binary folder /\linebreak[3] external library &
+ \type{IPackageFragmentRoot} & Hold source or binary files, can be a folder
+ or a library (zip / jar file). \\
+ \hline
+ Each package & \type{IPackageFragment} & Each package is below the
+ \type{IPackageFragmentRoot}, sub-packages are not leaves of the package,
+ they are listed directed under \type{IPackageFragmentRoot}. \\
+ \hline
+ Java Source file & \type{ICompilationUnit} & The Source file is always below
+ the package node. \\
+ \hline
+ Types /\linebreak[2] Fields /\linebreak[3] Methods & \type{IType} /
+ \linebreak[0]
+ \type{IField} /\linebreak[3] \type{IMethod} & Types, fields and methods. \\
+ \hline
+ \end{tabularx}
+ \caption{The elements of the Java Model. {\footnotesize Taken from
+ \url{http://www.vogella.com/tutorials/EclipseJDT/article.html}}}
+ \label{tab:javaModelTable}
+\end{table}
+
+The hierarchy of the Java Model is shown in \myref{fig:javaModel}.
+
+\begin{figure}[h]
+ \centering
+ \begin{tikzpicture}[%
+ grow via three points={one child at (0,-0.7) and
+ two children at (0,-0.7) and (0,-1.4)},
+ edge from parent path={(\tikzparentnode.south west)+(0.5,0) |-
+ (\tikzchildnode.west)}]
+ \tikzstyle{every node}=[draw=black,thick,anchor=west]
+ \tikzstyle{selected}=[draw=red,fill=red!30]
+ \tikzstyle{optional}=[dashed,fill=gray!50]
+ \node {\type{IJavaProject}}
+ child { node {\type{IPackageFragmentRoot}}
+ child { node {\type{IPackageFragment}}
+ child { node {\type{ICompilationUnit}}
+ child { node {\type{IType}}
+ child { node {\type{\{ IType \}*}}
+ child { node {\type{\ldots}}}
+ }
+ child [missing] {}
+ child { node {\type{\{ IField \}*}}}
+ child { node {\type{IMethod}}
+ child { node {\type{\{ IType \}*}}
+ child { node {\type{\ldots}}}
+ }
+ }
+ child [missing] {}
+ child [missing] {}
+ child { node {\type{\{ IMethod \}*}}}
+ }
+ child [missing] {}
+ child [missing] {}
+ child [missing] {}
+ child [missing] {}
+ child [missing] {}
+ child [missing] {}
+ child [missing] {}
+ child { node {\type{\{ IType \}*}}}
+ }
+ child [missing] {}
+ child [missing] {}
+ child [missing] {}
+ child [missing] {}
+ child [missing] {}
+ child [missing] {}
+ child [missing] {}
+ child [missing] {}
+ child [missing] {}
+ child { node {\type{\{ ICompilationUnit \}*}}}
+ }
+ child [missing] {}
+ child [missing] {}
+ child [missing] {}
+ child [missing] {}
+ child [missing] {}
+ child [missing] {}
+ child [missing] {}
+ child [missing] {}
+ child [missing] {}
+ child [missing] {}
+ child [missing] {}
+ child { node {\type{\{ IPackageFragment \}*}}}
+ }
+ child [missing] {}
+ child [missing] {}
+ child [missing] {}
+ child [missing] {}
+ child [missing] {}
+ child [missing] {}
+ child [missing] {}
+ child [missing] {}
+ child [missing] {}
+ child [missing] {}
+ child [missing] {}
+ child [missing] {}
+ child [missing] {}
+ child { node {\type{\{ IPackageFragmentRoot \}*}}}
+ ;
+ \end{tikzpicture}
+ \caption{The Java model of Eclipse. ``\type{\{ SomeElement \}*}'' means
+ \type{SomeElement} zero or more times. For recursive structures,
+ ``\type{\ldots}'' is used.}
+ \label{fig:javaModel}
+\end{figure}
+
+\section{The Abstract Synax Tree}
+Eclipse is following the common paradigm of using an abstract syntaxt tree for
+source code analysis and manipulation.
+
+When parsing program source code into something that can be used as a foundation
+for analysis, the start of the process follows the same steps as in a compiler.
+This is all natural, because the way a compiler anayzes code is no different
+from how source manipulation programs would do it, except for some properties of
+code that is analyzed in the parser, and that they may be differing in what
+kinds of properties they analyze. Thus the process of translation source code
+into a structure that is suitable for analyzing, can be seen as a kind of
+interrupted compilation process \see{fig:interruptedCompilationProcess}.
+
+\begin{figure}[h]
+ \centering
+ \tikzset{
+ base/.style={anchor=north, align=center, rectangle, minimum height=1.4cm},
+ basewithshadow/.style={base, drop shadow, fill=white},
+ outlined/.style={basewithshadow, draw, rounded corners, minimum
+ width=0.4cm},
+ primary/.style={outlined, font=\bfseries},
+ dashedbox/.style={outlined, dashed},
+ arrowpath/.style={black, align=center, font=\small},
+ processarrow/.style={arrowpath, ->, >=angle 90, shorten >=1pt},
+ }
+ \begin{tikzpicture}[node distance=1.3cm and 3cm, scale=1, every
+ node/.style={transform shape}]
+ \node[base](AuxNode1){\small source code};
+ \node[primary, right=of AuxNode1, xshift=-2.5cm](Scanner){Scanner};
+ \node[primary, right=of Scanner, xshift=0.5cm](Parser){Parser};
+ \node[dashedbox, below=of Parser](SemanticAnalyzer){Semantic\\Analyzer};
+ \node[dashedbox, left=of SemanticAnalyzer](SourceCodeOptimizer){Source
+ Code\\Optimizer};
+ \node[dashedbox, below=of SourceCodeOptimizer
+ ](CodeGenerator){Code\\Generator};
+ \node[dashedbox, right=of CodeGenerator](TargetCodeOptimizer){Target
+ Code\\Optimizer};
+ \node[base, right=of TargetCodeOptimizer](AuxNode2){};
+
+ \draw[processarrow](AuxNode1) -- (Scanner);
+
+ \path[arrowpath] (Scanner) -- node [sloped](tokens){tokens}(Parser);
+ \draw[processarrow](Scanner) -- (tokens) -- (Parser);
+
+ \path[arrowpath] (Parser) -- node (syntax){syntax
+ tree}(SemanticAnalyzer);
+ \draw[processarrow](Parser) -- (syntax) -- (SemanticAnalyzer);
+
+ \path[arrowpath] (SemanticAnalyzer) -- node
+ [sloped](annotated){annotated\\tree}(SourceCodeOptimizer);
+ \draw[processarrow, dashed](SemanticAnalyzer) -- (annotated) --
+ (SourceCodeOptimizer);
+
+ \path[arrowpath] (SourceCodeOptimizer) -- node
+ (intermediate){intermediate code}(CodeGenerator);
+ \draw[processarrow, dashed](SourceCodeOptimizer) -- (intermediate) --
+ (CodeGenerator);
+
+ \path[arrowpath] (CodeGenerator) -- node [sloped](target1){target
+ code}(TargetCodeOptimizer);
+ \draw[processarrow, dashed](CodeGenerator) -- (target1) --
+ (TargetCodeOptimizer);
+
+ \path[arrowpath](TargetCodeOptimizer) -- node [sloped](target2){target
+ code}(AuxNode2);
+ \draw[processarrow, dashed](TargetCodeOptimizer) -- (target2) (AuxNode2);
+ \end{tikzpicture}
+ \caption{Interrupted compilation process. {\footnotesize (Full compilation
+ process from \emph{Compiler construction: principles and practice} by
+ Kenneth C. Louden\citing{louden1997}.)}}
+ \label{fig:interruptedCompilationProcess}
+\end{figure}
-\section{AST}
-\todoin{Explain what it is, or just how it is structured in Eclipse and how to
-analyze it?}
+\todoin{Refine \myref{fig:interruptedCompilationProcess}.}
+
+The process starts with a \emph{scanner}, or lexer. The job of the scanner is to
+read the source code and divide it into tokens for the parser. Therefore, it is
+also sometimes called a tokenizer. A token is a logical unit, defined in the
+language specification, consisting of one or more consecutive characters. In
+the java language the tokens can for instance be the \var{this} keyword, a curly
+bracket \var{\{} or a \var{nameToken}. It is recognized by the scanner on the
+basis of something eqivalent of a regular expression. This part of the process
+is often implemented with the use of a finite automata. In fact, it is common to
+specify the tokens in regular expressions, that in turn is translated into a
+finite automata lexer. This process can be automated.
+
+The program component used to translate a a stream of tokens into something
+meaningful, is called a parser. A parser is fed tokens from the scanner and
+performs an analysis of the structure of a program. It verifies that the syntax
+is correct according to the grammar rules of a language, that is usually
+specified in a context-free grammar, and often in a variant of the
+\emph{Backus--Naur
+Form}\footnote{\url{https://en.wikipedia.org/wiki/Backus-Naur\_Form}}. The
+result coming from the parser is in the form of an \emph{Abstract Syntax Tree},
+AST for short. It is called \emph{abstract}, because the structure does not
+contain all of the tokens produced by the scanner. It only contain logical
+constructs, and because it forms a tree, all kinds of parentheses and brackets
+are implicit in the structure. It is this AST that is used when performing the
+semantic analysis of the code.
+
+As an example we can think of the expression \code{(5 + 7) * 2}. The root of
+this tree would in Eclipse be an \type{InfixExpression} with the operator
+\var{TIMES}, and a left operand that is also an \type{InfixExpression} with the
+operator \var{PLUS}. The left operand \type{InfixExpression}, has in turn a left
+operand of type \type{NumberLiteral} with the value \var{``5''} and a right
+operand \type{NumberLiteral} with the value \var{``7''}. The root will have a
+right operand of type \type{NumberLiteral} and value \var{``2''}. The AST for
+this expression is illustrated in \myref{fig:astInfixExpression}.
+
+Contrary to the Java Model, an abstract syntaxt tree is a heavy-weight
+representation of source code. It contains information about propertes like type
+bindings for variables and variable bindings for names.
-\section{Illegal selections}
-\subsection{Not all branches end in return}
+\begin{figure}[h]
+ \centering
+ \begin{tikzpicture}[scale=0.8]
+ \tikzset{level distance=40pt}
+ \tikzset{sibling distance=5pt}
+ \tikzstyle{thescale}=[scale=0.8]
+ \tikzset{every tree node/.style={align=center}}
+ \tikzset{edge from parent/.append style={thick}}
+ \tikzstyle{inode}=[rectangle,rounded corners,draw,fill=lightgray,drop
+ shadow,align=center]
+ \tikzset{every internal node/.style={inode}}
+ \tikzset{every leaf node/.style={draw=none,fill=none}}
+
+ \Tree [.\type{InfixExpression} [.\type{InfixExpression}
+ [.\type{NumberLiteral} \var{``5''} ] [.\type{Operator} \var{PLUS} ]
+ [.\type{NumberLiteral} \var{``7''} ] ]
+ [.\type{Operator} \var{TIMES} ]
+ [.\type{NumberLiteral} \var{``2''} ]
+ ]
+ \end{tikzpicture}
+ \caption{The abstract syntax tree for the expression \code{(5 + 7) * 2}.}
+ \label{fig:astInfixExpression}
+\end{figure}
-\subsection{Ambiguous return statement}
-This problem occurs when there is either more than one assignment to a local
-variable that is used outside of the selection, or there is only one, but there
-are also return statements in the selection.
+\subsection{The AST in Eclipse}
+In Eclipse, every node in the AST is a child of the abstract superclass
+\typewithref{org.eclipse.jdt.core.dom}{ASTNode}. Every \type{ASTNode}, among a
+lot of other things, provides information about its position and length in the
+source code, as well as a reference to its parent and to the root of the tree.
+
+The root of the AST is always of type \type{CompilationUnit}. It is not the same
+as an instance of an \type{ICompilationUnit}, which is the compilation unit
+handle of the Java model. The children of a \type{CompilationUnit} is an
+optional \type{PackageDeclaration}, zero or more nodes of type
+\type{ImportDecaration} and all its top-level type declarations that has node
+types \type{AbstractTypeDeclaration}.
+
+An \type{AbstractType\-Declaration} can be one of the types
+\type{AnnotationType\-Declaration}, \type{Enum\-Declaration} or
+\type{Type\-Declaration}. The children of an \type{AbstractType\-Declaration}
+must be a subtype of a \type{BodyDeclaration}. These subtypes are:
+\type{AnnotationTypeMember\-Declaration}, \type{EnumConstant\-Declaration},
+\type{Field\-Declaration}, \type{Initializer} and \type{Method\-Declaration}.
+
+Of the body declarations, the \type{Method\-Declaration} is the most interesting
+one. Its children include lists of modifiers, type parameters, parameters and
+exceptions. It has a return type node and a body node. The body, if present, is
+of type \type{Block}. A \type{Block} is itself a \type{Statement}, and its
+children is a list of \type{Statement} nodes.
+
+There are too many types of the abstract type \type{Statement} to list up, but
+there exists a subtype of \type{Statement} for every statement type of Java, as
+one would expect. This also applies to the abstract type \type{Expression}.
+However, the expression \type{Name} is a little special, since it is both used
+as an operand in compound expressions, as well as for names in type declarations
+and such.
+
+There is an overview of some of the structure of an Eclipse AST in
+\myref{fig:astEclipse}.
-\todoin{Explain why we do not need to consider variables assigned inside
-local/anonymous classes. (The referenced variables need to be final and so
-on\ldots)}
+\begin{figure}[h]
+ \centering
+ \begin{tikzpicture}[scale=0.8]
+ \tikzset{level distance=50pt}
+ \tikzset{sibling distance=5pt}
+ \tikzstyle{thescale}=[scale=0.8]
+ \tikzset{every tree node/.style={align=center}}
+ \tikzset{edge from parent/.append style={thick}}
+ \tikzstyle{inode}=[rectangle,rounded corners,draw,fill=lightgray,drop
+ shadow,align=center]
+ \tikzset{every internal node/.style={inode}}
+ \tikzset{every leaf node/.style={draw=none,fill=none}}
+
+ \Tree [.\type{CompilationUnit} [.\type{[ PackageDeclaration ]} [.\type{Name} ]
+ [.\type{\{ Annotation \}*} ] ]
+ [.\type{\{ ImportDeclaration \}*} [.\type{Name} ] ]
+ [.\type{\{ AbstractTypeDeclaration \}+} [.\node(site){\type{\{
+ BodyDeclaration \}*}}; ] [.\type{SimpleName} ] ]
+ ]
+ \begin{scope}[shift={(0.5,-6)}]
+ \node[inode,thescale](root){\type{MethodDeclaration}};
+ \node[inode,thescale](modifiers) at (4.5,-5){\type{\{ IExtendedModifier \}*}
+ \\ {\footnotesize (Of type \type{Modifier} or \type{Annotation})}};
+ \node[inode,thescale](typeParameters) at (-6,-3.5){\type{\{ TypeParameter
+ \}*}};
+ \node[inode,thescale](parameters) at (-5,-5){\type{\{
+ SingleVariableDeclaration \}*} \\ {\footnotesize (Parameters)}};
+ \node[inode,thescale](exceptions) at (5,-3){\type{\{ Name \}*} \\
+ {\footnotesize (Exceptions)}};
+ \node[inode,thescale](return) at (-6.5,-2){\type{Type} \\ {\footnotesize
+ (Return type)}};
+ \begin{scope}[shift={(0,-5)}]
+ \Tree [.\node(body){\type{[ Block ]} \\ {\footnotesize (Body)}};
+ [.\type{\{ Statement \}*} [.\type{\{ Expression \}*} ]
+ [.\type{\{ Statement \}*} [.\type{\ldots} ]]
+ ]
+ ]
+ \end{scope}
+ \end{scope}
+ \draw[->,>=triangle 90,shorten >=1pt](root.east)..controls +(east:2) and
+ +(south:1)..(site.south);
+
+ \draw (root.south) -- (modifiers);
+ \draw (root.south) -- (typeParameters);
+ \draw (root.south) -- ($ (parameters.north) + (2,0) $);
+ \draw (root.south) -- (exceptions);
+ \draw (root.south) -- (return);
+ \draw (root.south) -- (body);
+
+ \end{tikzpicture}
+ \caption{The format of the abstract syntax tree in Eclipse.}
+ \label{fig:astEclipse}
+\end{figure}
+\todoin{Add more to the AST format tree? \myref{fig:astEclipse}}
+
+\section{The ASTVisitor}\label{astVisitor}
+So far, the only thing that has been adressed is how the the data that is going
+to be the basis for our analysis is structured. Another aspect of it is how we
+are going to traverse the AST to gather the information we need, so we can
+conclude about the properties we are analysing. It is of course possible to
+start at the top of the tree, and manually search through its nodes for the ones
+we are looking for, but that is a bit inconvenient. To be able to efficiently
+utilize such an approach, we would need to make our own framework for traversing
+the tree and visiting only the types of nodes we are after. Luckily, this
+functionality is already provided in Eclipse, by its
+\typewithref{org.eclipse.jdt.core.dom}{ASTVisitor}.
+
+The Eclipse AST, together with its \type{ASTVisitor}, follows the \emph{Visitor}
+pattern\citing{designPatterns}. The intent of this design pattern is to
+facilitate extending the functionality of classes without touching the classes
+themselves.
+
+Let us say that there is a class hierarchy of \emph{Elements}. These elements
+all have a method \method{accept(Visitor visitor)}. In its simplest form, the
+\method{accept} method just calls the \method{visit} method of the visitor with
+itself as an argument, like this: \code{visitor.visit(this)}. For the visitors
+to be able to extend the functionality of all the classes in the elements
+hierarchy, each \type{Visitor} must have one visit method for each concrete
+class in the hierarchy. Say the hierarchy consists of the concrete classes
+\type{ConcreteElementA} and \type{ConcreteElementB}. Then each visitor must have
+the (possibly empty) methods \method{visit(ConcreteElementA element)} and
+\method{visit(ConcreteElementB element)}. This scenario is depicted in
+\myref{fig:visitorPattern}.
-\chapter{Eclipse Bugs}
+\begin{figure}[h]
+ \centering
+ \tikzstyle{abstract}=[rectangle, draw=black, fill=white, drop shadow, text
+ centered, anchor=north, text=black, text width=6cm, every one node
+part/.style={align=center, font=\bfseries\itshape}]
+ \tikzstyle{concrete}=[rectangle, draw=black, fill=white, drop shadow, text
+ centered, anchor=north, text=black, text width=6cm]
+ \tikzstyle{inheritarrow}=[->, >=open triangle 90, thick]
+ \tikzstyle{commentarrow}=[->, >=angle 90, dashed]
+ \tikzstyle{line}=[-, thick]
+ \tikzset{every one node part/.style={align=center, font=\bfseries}}
+ \tikzset{every second node part/.style={align=center, font=\ttfamily}}
+
+ \begin{tikzpicture}[node distance=1cm, scale=0.8, every node/.style={transform
+ shape}]
+ \node (Element) [abstract, rectangle split, rectangle split parts=2]
+ {
+ \nodepart{one}{Element}
+ \nodepart{second}{+accept(visitor: Visitor)}
+ };
+ \node (AuxNode01) [text width=0, minimum height=2cm, below=of Element] {};
+ \node (ConcreteElementA) [concrete, rectangle split, rectangle split
+ parts=2, left=of AuxNode01]
+ {
+ \nodepart{one}{ConcreteElementA}
+ \nodepart{second}{+accept(visitor: Visitor)}
+ };
+ \node (ConcreteElementB) [concrete, rectangle split, rectangle split
+ parts=2, right=of AuxNode01]
+ {
+ \nodepart{one}{ConcreteElementB}
+ \nodepart{second}{+accept(visitor: Visitor)}
+ };
+
+ \node[comment, below=of ConcreteElementA] (CommentA) {visitor.visit(this)};
+
+ \node[comment, below=of ConcreteElementB] (CommentB) {visitor.visit(this)};
+
+ \node (AuxNodeX) [text width=0, minimum height=1cm, below=of AuxNode01] {};
+
+ \node (Visitor) [abstract, rectangle split, rectangle split parts=2,
+ below=of AuxNodeX]
+ {
+ \nodepart{one}{Visitor}
+ \nodepart{second}{+visit(ConcreteElementA)\\+visit(ConcreteElementB)}
+ };
+ \node (AuxNode02) [text width=0, minimum height=2cm, below=of Visitor] {};
+ \node (ConcreteVisitor1) [concrete, rectangle split, rectangle split
+ parts=2, left=of AuxNode02]
+ {
+ \nodepart{one}{ConcreteVisitor1}
+ \nodepart{second}{+visit(ConcreteElementA)\\+visit(ConcreteElementB)}
+ };
+ \node (ConcreteVisitor2) [concrete, rectangle split, rectangle split
+ parts=2, right=of AuxNode02]
+ {
+ \nodepart{one}{ConcreteVisitor2}
+ \nodepart{second}{+visit(ConcreteElementA)\\+visit(ConcreteElementB)}
+ };
+
+
+ \draw[inheritarrow] (ConcreteElementA.north) -- ++(0,0.7) -|
+ (Element.south);
+ \draw[line] (ConcreteElementA.north) -- ++(0,0.7) -|
+ (ConcreteElementB.north);
+
+ \draw[inheritarrow] (ConcreteVisitor1.north) -- ++(0,0.7) -|
+ (Visitor.south);
+ \draw[line] (ConcreteVisitor1.north) -- ++(0,0.7) -|
+ (ConcreteVisitor2.north);
+
+ \draw[commentarrow] (CommentA.north) -- (ConcreteElementA.south);
+ \draw[commentarrow] (CommentB.north) -- (ConcreteElementB.south);
+
+
+ \end{tikzpicture}
+ \caption{The Visitor Pattern.}
+ \label{fig:visitorPattern}
+\end{figure}
+
+The use of the visitor pattern can be appropriate when the hierarchy of elements
+is mostly stable, but the family of operations over its elements is constantly
+growing. This is clearly the cas for the Eclipse AST, since the hierarchy of
+type \type{ASTNode} is very stable, but the functionality of its elements is
+extended every time someone needs to operate on the AST. Another aspect of the
+Eclipse implementation is that it is a public API, and the visitor pattern is an
+easy way to provide access to the nodes in the tree.
+
+The version of the visitor pattern implemented for the AST nodes in Eclipse also
+provides an elegant way to traverse the tree. It does so by following the
+convention that every node in the tree first let the visitor visit itself,
+before it also makes all its children accept the visitor. The children are only
+visited if the visit method of their parent returns \var{true}. This pattern
+then makes for a prefix traversal of the AST. If postfix traversal is desired,
+the visitors also has \method{endVisit} methods for each node type, that is
+called after the \method{visit} method for a node. In addition to these visit
+methods, there are also the methods \method{preVisit(ASTNode)},
+\method{postVisit(ASTNode)} and \method{preVisit2(ASTNode)}. The
+\method{preVisit} method is called before the type-specific \method{visit}
+method. The \method{postVisit} method is called after the type-specific
+\method{endVisit}. The type specific \method{visit} is only called if
+\method{preVisit2} returns \var{true}. Overriding the \method{preVisit2} is also
+altering the behavior of \method{preVisit}, since the default implementation is
+responsible for calling it.
+
+An example of a trivial \type{ASTVisitor} is shown in
+\myref{lst:astVisitorExample}.
+
+\begin{listing}
+\begin{minted}{java}
+public class CollectNamesVisitor extends ASTVisitor {
+ Collection<Name> names = new LinkedList<Name>();
+
+ @Override
+ public boolean visit(QualifiedName node) {
+ names.add(node);
+ return false;
+ }
+
+ @Override
+ public boolean visit(SimpleName node) {
+ names.add(node);
+ return true;
+ }
+}
+\end{minted}
+\caption{An \type{ASTVisitor} that visits all the names in a subtree and adds
+them to a collection, except those names that are children of any
+\type{QualifiedName}.}
+\label{lst:astVisitorExample}
+\end{listing}
+
+\section{Property collectors}\label{propertyCollectors}
+The prefixes and unfixes are found by property
+collectors\typeref{no.uio.ifi.refaktor.extractors.collectors.PropertyCollector}.
+A property collector is of the \type{ASTVisitor} type, and thus visits nodes of
+type \type{ASTNode} of the abstract syntax tree \see{astVisitor}.
+
+\subsection{The PrefixesCollector}
+The \typewithref{no.uio.ifi.refaktor.extractors.collectors}{PrefixesCollector}
+finds prefixes that makes up the basis for calculating move targets for the
+Extract and Move Method refactoring. It visits expression
+statements\typeref{org.eclipse.jdt.core.dom.ExpressionStatement} and creates
+prefixes from its expressions in the case of method invocations. The prefixes
+found is registered with a prefix set, together with all its sub-prefixes.
+
+\subsection{The UnfixesCollector}\label{unfixes}
+The \typewithref{no.uio.ifi.refaktor.extractors.collectors}{UnfixesCollector}
+finds unfixes within a selection. That is prefixes that cannot be used as a
+basis for finding a move target in a refactoring.
+
+An unfix can be a name that is assigned to within a selection. The reason that
+this cannot be allowed, is that the result would be an assignment to the
+\type{this} keyword, which is not valid in Java \see{eclipse_bug_420726}.
+
+Prefixes that originates from variable declarations within the same selection
+are also considered unfixes. This is because when a method is moved, it needs to
+be called through a variable. If this variable is also within the method that is
+to be moved, this obviously cannot be done.
+
+Also considered as unfixes are variable references that are of types that is not
+suitable for moving a methods to. This can be either because it is not
+physically possible to move the method to the desired class or that it will
+cause compilation errors by doing so.
+
+If the type binding for a name is not resolved it is considered and unfix. The
+same applies to types that is only found in compiled code, so they have no
+underlying source that is accessible to us. (E.g. the \type{java.lang.String}
+class.)
+
+Interfaces types are not suitable as targets. This is simply because interfaces
+in java cannot contain methods with bodies. (This thesis does not deal with
+features of Java versions later than Java 7. Java 8 has interfaces with default
+implementations of methods.) Neither are local types allowed. This accounts for
+both local and anonymous classes. Anonymous classes are effectively the same as
+interface types with respect to unfixes. Local classes could in theory be used
+as targets, but this is not possible due to limitations of the implementation of
+the Extract and Move Method refactoring. The problem is that the refactoring is
+done in two steps, so the intermediate state between the two refactorings would
+not be legal Java code. In the case of local classes, the problem is that, in
+the intermediate step, a selection referencing a local class would need to take
+the local class as a parameter if it were to be extracted to a new method. This
+new method would need to live in the scope of the declaring class of the
+originating method. The local class would then not be in the scope of the
+extracted method, thus bringing the source code into an illegal state. One could
+imagine that the method was extracted and moved in one operation, without an
+intermediate state. Then it would make sense to include variables with types of
+local classes in the set of legal targets, since the local classes would then be
+in the scopes of the method calls. If this makes any difference for software
+metrics that measure coupling would be a different discussion.
+
+\begin{listing}
+\begin{multicols}{2}
+\begin{minted}[]{java}
+// Before
+void declaresLocalClass() {
+ class LocalClass {
+ void foo() {}
+ void bar() {}
+ }
+
+ LocalClass inst =
+ new LocalClass();
+ inst.foo();
+ inst.bar();
+}
+\end{minted}
+
+\columnbreak
+
+\begin{minted}[]{java}
+// After Extract Method
+void declaresLocalClass() {
+ class LocalClass {
+ void foo() {}
+ void bar() {}
+ }
+
+ LocalClass inst =
+ new LocalClass();
+ fooBar(inst);
+}
+
+// Intermediate step
+void fooBar(LocalClass inst) {
+ inst.foo();
+ inst.bar();
+}
+\end{minted}
+\end{multicols}
+\caption{When Extract and Move Method tries to use a variable with a local type
+as the move target, an intermediate step is taken that is not allowed. Here:
+\type{LocalClass} is not in the scope of \method{fooBar} in its intermediate
+location.}
+\label{lst:extractMethod_LocalClass}
+\end{listing}
+
+The last class of names that are considered unfixes is names used in null tests.
+These are tests that reads like this: if \texttt{<name>} equals \var{null} then
+do something. If allowing variables used in those kinds of expressions as
+targets for moving methods, we would end up with code containing boolean
+expressions like \texttt{this == null}, which would not be meaningful, since
+\var{this} would never be \var{null}.
+
+
+\subsection{The ContainsReturnStatementCollector}
+The
+\typewithref{no.uio.ifi.refaktor.analyze.collectors}{ContainsReturnStatementCollector}
+is a very simple property collector. It only visits the return statements within
+a selection, and can report whether it encountered a return statement or not.
+
+\subsection{The LastStatementCollector}
+The \typewithref{no.uio.ifi.refaktor.analyze.collectors}{LastStatementCollector}
+collects the last statement of a selection. It does so by only visiting the top
+level statements of the selection, and compares the textual end offset of each
+encuntered statement with the end offset of the previous statement found.
+
+\section{Checkers}\label{checkers}
+The checkers are a range of classes that checks that selections complies with
+certian criterias. If a
+\typewithref{no.uio.ifi.refaktor.analyze.analyzers}{Checker} fails, it throws a
+\type{CheckerException}. The checkers are managed by the
+\type{LegalStatementsChecker}, which does not, in fact, implement the
+\type{Checker} interface. It does, however, run all the checkers registered with
+it, and reports that all statements are considered legal if no
+\type{CheckerException} is thrown. Many of the checkers either extends the
+\type{PropertyCollector} or utilizes one or more property collectors to verify
+some criterias. The checkers registered with the \type{LegalStatementsChecker}
+are described next. They are run in the order presented below.
+
+\subsection{The EnclosingInstanceReferenceChecker}
+The purpose of this checker is to verify that the names in a selection is not
+referencing any enclosing instances. This is for making sure that all references
+is legal in a method that is to be moved. Theoretically, some situations could
+be easily solved my passing a reference to the referenced class with the moved
+method (e.g. when calling public methods), but the dependency on the
+\type{MoveInstanceMethodProcessor} prevents this.
+
+The
+\typewithref{no.uio.ifi.refaktor.analyze.analyzers}{EnclosingInstanceReferenceChecker}
+is a modified version of the
+\typewithref{org.eclipse.jdt.internal.corext.refactoring.structure.MoveInstanceMethodProcessor}{EnclosingInstanceReferenceFinder}
+from the \type{MoveInstanceMethodProcessor}. Wherever the
+\type{EnclosingInstanceReferenceFinder} would create a fatal error status, the
+checker throws a \type{CheckerException}.
+
+It works by first finding all of the enclosing types of a selection. Thereafter
+it visits all its simple names to check that they are not references to
+variables or methods declared in any of the enclosing types. In addition the
+checker visits \var{this}-expressions to verify that no such expressions is
+qualified with any name.
+
+\subsection{The ReturnStatementsChecker}\label{returnStatementsChecker}
+\todoin{Write\ldots/change implementation/use control flow graph?}
+
+\subsection{The AmbiguousReturnValueChecker}
+This checker verifies that there are no \emph{ambiguous return statements} in a
+selection. The problem with ambiguous return statements arise when a selection
+is chosen to be extracted into a new method, but it needs to return more than
+one value from that method. This problem occurs in two situations. The first
+situation arise when there is more than one local variable that is both assigned
+to within a selection and also referenced after the selection. The other
+situation occur when there is only one such assignment, but there is also one or
+more return statements in the selection.
+
+First the checker needs to collect some data. Those data are the binding keys
+for all simple names that are assigned to within the selection, including
+variable declarations, but excluding fields. The checker also collects whether
+there exists a return statement in the selection or not. No further checks of
+return statements are needed, since, at this point, the selection is already
+checked for illegal return statements \see{returnStatementsChecker}.
+
+After the binding keys of the assignees are collected, the checker searches the
+part of the enclosing method that is after the selection for references whose
+binding keys are among the the collected keys. If more than one unique referral
+is found, or only one referral is found, but the selection also contains a
+return statement, we have a situation with an ambiguous return value, and an
+exception is thrown.
+
+%\todoin{Explain why we do not need to consider variables assigned inside
+%local/anonymous classes. (The referenced variables need to be final and so
+%on\ldots)}
+
+\subsection{The IllegalStatementsChecker}
+This checker is designed to check for illegal statements.
+
+Any use of the \var{super} keyword is prohibited, since its meaning is altered
+when moving a method to another class.
+
+For a \emph{break} statement, there is two situations to consider: A break
+statement with or without a label. If the break statement has a label, it is
+checked that whole of the labeled statement is inside the selection. Since a
+label does not have any binding information, we have to search upwards in the
+AST to find the \type{LabeledStatement} that corresponds to the label from the
+break statement, and check that it is contained in the selection. If the break
+statement does not have a label attached to it, it is checked that its innermost
+enclosing loop or switch statement also is inside the selection.
+
+The situation for a \emph{continue} statement is the same as for a break
+statement, except that it is not allowed inside switch statements.
+
+Regarding \emph{assignments}, two types of assignments is allowed: Assignment to
+a non-final variable and assignment to an array access. All other assignments is
+regarded illegal.
+
+\todoin{Finish\ldots}
+
+\chapter{Eclipse Bugs Found}
\todoin{Add other things and change headline?}
\section{Eclipse bug 420726: Code is broken when moving a method that is
-assigning to the parameter that is also the move destination}
+assigning to the parameter that is also the move
+destination}\label{eclipse_bug_420726}
This bug\footnote{\url{https://bugs.eclipse.org/bugs/show\_bug.cgi?id=420726}}
was found when analyzing what kinds of names that was to be considered as
-\emph{unfixes}.\todo{refer to unfixes}
+\emph{unfixes} \see{unfixes}.
\subsection{The bug}
The bug emerges when trying to move a method from one class to another, and when
This bug surfaces when trying to use the Move Method refactoring to move a
method from an anonymous class to another class. This happens both for my
simulation as well as in Eclipse, through the user interface. It only occurs
-when Eclipse analyses the program and finds it necessary to pass an instance of
+when Eclipse analyzes the program and finds it necessary to pass an instance of
the originating class as a parameter to the moved method. I.e. it want to pass a
\var{this} expression. The execution ends in an
\typewithref{java.lang}{IllegalArgumentException} in
class of the method to move is anonymous, the \var{this} expression in the
parameter list is not qualified with the declaring class' (empty) name.
+\section{Eclipse bug 429954: Extracting statement with reference to local type
+breaks code}\label{eclipse_bug_429954}
+The bug\footnote{\url{https://bugs.eclipse.org/bugs/show\_bug.cgi?id=429954}}
+was discovered when doing some changes to the way unfixes is computed.
+
+\subsection{The bug}
+The problem is that Eclipse is allowing selections that references variables of
+local types to be extracted. When this happens the code is broken, since the
+extracted method must take a parameter of a local type that is not in the
+methods scope. The problem is illustrated in
+\myref{lst:extractMethod_LocalClass}, but there in another setting.
+
+\subsection{Actions taken}
+There are no actions directly springing out of this bug, since the Extract
+Method refactoring cannot be meant to be this way. This is handled on the
+analysis stage of our Extract and Move Method refactoring. So names representing
+variables of local types is considered unfixes \see{unfixes}.
+\todoin{write more when fixing this in legal statements checker}
+
\chapter{Related Work}
\section{The compositional paradigm of refactoring}
git://git.uio.no / ifi-stolz-refaktor.git / blobdiff