+++ /dev/null
-/**************************************************************************
- * Copyright(c) 2007-2009, ALICE Experiment at CERN, All rights reserved. *
- * *
- * Author: The ALICE Off-line Project. *
- * Contributors are mentioned in the code where appropriate. *
- * *
- * Permission to use, copy, modify and distribute this software and its *
- * documentation strictly for non-commercial purposes is hereby granted *
- * without fee, provided that the above copyright notice appears in all *
- * copies and that both the copyright notice and this permission notice *
- * appear in the supporting documentation. The authors make no claims *
- * about the suitability of this software for any purpose. It is *
- * provided "as is" without express or implied warranty. *
- **************************************************************************/
-
-
-/* $Id$ */
-
-
-//========================================================================
-//
-// Geometry of the Inner Tracking System
-// ---------------------------------------
-// This geometry is a mix between the old geometry (originally coded
-// in AliITSvPPRasymmFMD) and the new TGeo geometry (v11).
-// The flags which indicate whether the old or the new part is used
-// is set in AliITSInitGeometry.cxx
-//
-// Ludovic Gaudichet (gaudichet@to.infn.it)
-//
-//========================================================================
-
-
-
-// $Log: AliITSv11Hybrid.cxx,v $
-// Revision 1.14 2008/01/10 11:14:13 masera
-// SPD/SDD thermal shield and SPD cones updated (M. Sitta)
-//
-// Revision 1.13 2007/12/20 16:58:46 masera
-// bug fixes for SPD1 and SDD1 (A. Dainese)
-//
-// Revision 1.12 2007/12/17 14:48:23 masera
-// Thermal shield between SPD and SDD (M. Sitta)
-//
-// Revision 1.11 2007/11/22 08:32:48 masera
-// Second thermal shield updated in agreement with the installed one. Correction concerning the chemical composition of Rohacell (M.Sitta)
-//
-// Revision 1.10 2007/11/19 17:01:26 masera
-// SSD ladder supports + endcaps systems (E. Cattaruzza)
-//
-// Revision 1.9 2007/10/21 19:22:53 masera
-// Coding conventions
-//
-// Revision 1.8 2007/10/21 18:59:10 masera
-// SPD new geometry added to Hybrid V11
-//
-// Revision 1.7 2007/08/24 14:32:57 hristov
-// Introduction of SPD half-stave volumes, cleaning and new code (in relation to new SPD geometry) in AliITSv11Hybrid (Ludovic)
-//
-// Revision 1.6 2007/07/27 08:12:39 morsch
-// Write all track references into the same branch.
-//
-// Revision 1.5 2007/06/28 10:17:25 masera
-// Introduction of the new SSD geometry in simulation (AliITSv11Hybrid) and suppression of overlaps between old and new parts
-//
-// Revision 1.4 2007/05/09 20:40:41 masera
-// Bug fix (V11Hybrid geometry)
-//
-// Revision 1.3 2007/05/08 16:57:42 masera
-// Updates concerning the geometry: versioning system, new V11hybrid version, bug fixes (B.Nilsend and L. Gaudichet
-//
-
-#include <TClonesArray.h>
-#include <TGeoGlobalMagField.h>
-#include <TGeoManager.h>
-#include <TGeoMatrix.h>
-#include <TGeoPhysicalNode.h>
-#include <TGeoVolume.h>
-#include <TGeoXtru.h>
-#include <TLorentzVector.h>
-#include <TString.h>
-#include <TVirtualMC.h>
-
-#include "AliITS.h"
-#include "AliITSDetTypeSim.h"
-#include "AliITShit.h"
-#include "AliITSCalibrationSDD.h"
-#include "AliITSsegmentationSDD.h"
-#include "AliITSsegmentationSPD.h"
-#include "AliITSsegmentationSSD.h"
-#include "AliITSv11Hybrid.h"
-#include "AliLog.h"
-#include "AliMC.h"
-#include "AliMagF.h"
-#include "AliRun.h"
-#include "AliTrackReference.h"
-#include "AliITSInitGeometry.h"
-#include "AliITSv11GeometrySPD.h"
-#include "AliITSv11GeometrySDD.h"
-#include "AliITSv11GeometrySSD.h"
-#include "AliITSv11GeometrySupport.h"
-#include "AliGeomManager.h"
-
-
-ClassImp(AliITSv11Hybrid)
-
-//______________________________________________________________________
-AliITSv11Hybrid::AliITSv11Hybrid():
- fByThick(kTRUE),
- fMajorVersion(IsVersion()),
- fMinorVersion(-1),
- fDet1(0),
- fDet2(0),
- fChip1(0),
- fChip2(0),
- fRails(0),
- fFluid(0),
- fIDMother(0),
- fInitGeom((AliITSVersion_t)fMajorVersion,fMinorVersion),
- fSPDgeom(0),
- fSDDgeom(0),
- fSSDgeom(0),
- fSupgeom(0)
- {
- // Standard default constructor
- // Inputs:
- // none.
- // Outputs:
- // none.
- // Return:
- // none.
-}
-
-//______________________________________________________________________
-AliITSv11Hybrid::AliITSv11Hybrid(const char *title)
- : AliITS("ITS", title),
- fByThick(kTRUE),
- fMajorVersion(IsVersion()),
- fMinorVersion(1),
- fDet1(200.0),
- fDet2(200.0),
- fChip1(150.0),
- fChip2(150.0),
- fRails(0),
- fFluid(1),
- fIDMother(0),
- fInitGeom((AliITSVersion_t)fMajorVersion,fMinorVersion),
- fSPDgeom(0),
- fSDDgeom(0),
- fSSDgeom(0),
- fSupgeom(0)
-{
- // Standard constructor for the v11Hybrid geometry.
- // Inputs:
- // const char * title Arbitrary title
- // Outputs:
- // none.
- // Return:
- // none.
- Int_t i;
-
- fSPDgeom = new AliITSv11GeometrySPD();
- fSDDgeom = new AliITSv11GeometrySDD(0);
- fSSDgeom = new AliITSv11GeometrySSD();
- fSupgeom = new AliITSv11GeometrySupport();
-
- fIdN = 6;
- fIdName = new TString[fIdN];
-
- if (AliITSInitGeometry::SPDIsTGeoNative()) {
- fIdName[0] = fSPDgeom->GetSenstiveVolumeName1();
- fIdName[1] = fSPDgeom->GetSenstiveVolumeName2();
- } else {
- fIdName[0] = "ITS1";
- fIdName[1] = "ITS2";
- }
-
- if (AliITSInitGeometry::SDDIsTGeoNative()) {
- fIdName[2] = fSDDgeom->GetSenstiveVolumeName3();
- fIdName[3] = fSDDgeom->GetSenstiveVolumeName4();
- } else {
- fIdName[2] = "ITS3";
- fIdName[3] = "ITS4";
- }
-
- if (AliITSInitGeometry::SSDIsTGeoNative()) {
- fIdName[4] = fSSDgeom->GetSenstiveVolumeName5();
- fIdName[5] = fSSDgeom->GetSenstiveVolumeName6();
- } else {
- fIdName[4] = "ITS5";
- fIdName[5] = "ITS6";
- }
-
- fIdSens = new Int_t[fIdN];
- for(i=0;i<fIdN;i++) fIdSens[i] = 0;
- SetThicknessDet1();
- SetThicknessDet2();
- SetThicknessChip1();
- SetThicknessChip2();
- SetDensityServicesByThickness();
-
-}
-
-//______________________________________________________________________
-AliITSv11Hybrid::AliITSv11Hybrid(const char *name, const char *title)
- : AliITS("ITS", title),
- fByThick(kTRUE),
- fMajorVersion(IsVersion()),
- fMinorVersion(1),
- fDet1(200.0),
- fDet2(200.0),
- fChip1(150.0),
- fChip2(150.0),
- fRails(0),
- fFluid(1),
- fIDMother(0),
- fInitGeom((AliITSVersion_t)fMajorVersion,fMinorVersion),
- fSPDgeom(0),
- fSDDgeom(0),
- fSSDgeom(0),
- fSupgeom(0)
-{
- // Standard constructor for the v11Hybrid geometry.
- // Inputs:
- // const char * name Ignored, set to "ITS"
- // const char * title Arbitrary title
- // Outputs:
- // none.
- // Return:
- // none.
- Int_t i;
-
- fSPDgeom = new AliITSv11GeometrySPD();
- fSDDgeom = new AliITSv11GeometrySDD(0);
- fSSDgeom = new AliITSv11GeometrySSD();
- fSupgeom = new AliITSv11GeometrySupport();
-
- fIdN = 6;
- fIdName = new TString[fIdN];
-
- (void) name; // removes warning message
-
- if (AliITSInitGeometry::SPDIsTGeoNative()) {
- fIdName[0] = fSPDgeom->GetSenstiveVolumeName1();
- fIdName[1] = fSPDgeom->GetSenstiveVolumeName2();
- } else {
- fIdName[0] = "ITS1";
- fIdName[1] = "ITS2";
- }
-
- if (AliITSInitGeometry::SDDIsTGeoNative()) {
- fIdName[2] = fSDDgeom->GetSenstiveVolumeName3();
- fIdName[3] = fSDDgeom->GetSenstiveVolumeName4();
- } else {
- fIdName[2] = "ITS3";
- fIdName[3] = "ITS4";
- }
-
- if (AliITSInitGeometry::SSDIsTGeoNative()) {
- fIdName[4] = fSSDgeom->GetSenstiveVolumeName5();
- fIdName[5] = fSSDgeom->GetSenstiveVolumeName6();
- } else {
- fIdName[4] = "ITS5";
- fIdName[5] = "ITS6";
- }
-
- fIdSens = new Int_t[fIdN];
- for(i=0;i<fIdN;i++) fIdSens[i] = 0;
- SetThicknessDet1();
- SetThicknessDet2();
- SetThicknessChip1();
- SetThicknessChip2();
- SetDensityServicesByThickness();
-
-}
-
-//______________________________________________________________________
-AliITSv11Hybrid::~AliITSv11Hybrid() {
- // Standard destructor
- // Inputs:
- // none.
- // Outputs:
- // none.
- // Return:
- // none.
- delete fSPDgeom;
- delete fSDDgeom;
- delete fSSDgeom;
- delete fSupgeom;
-}
-
-//______________________________________________________________________
-void AliITSv11Hybrid::SetT2Lmatrix(Int_t uid, Double_t yShift,
- Bool_t yFlip, Bool_t yRot180)
- const {
-
- //
- // Creates the TGeo Local to Tracking transformation matrix
- // and sends it to the corresponding TGeoPNEntry
- //
- // This function is used in AddAlignableVolumes()
-
- TGeoPNEntry *alignableEntry = gGeoManager->GetAlignableEntryByUID(uid);
- TGeoHMatrix* globMatrix = alignableEntry->GetGlobalOrig();
-
- Double_t *gtrans = globMatrix->GetTranslation(), rotMatrix[9];
- memcpy(&rotMatrix[0], globMatrix->GetRotationMatrix(), 9*sizeof(Double_t));
- Double_t al = TMath::ATan2(rotMatrix[1],rotMatrix[0]);
- if (yRot180) {
- al = TMath::ATan2(rotMatrix[1],-rotMatrix[0]);
- }
- Double_t xShift = gtrans[0]*TMath::Cos(al)+gtrans[1]*TMath::Sin(al);
- Double_t zShift = -gtrans[2];
-
- TGeoHMatrix *matLtoT = new TGeoHMatrix;
- matLtoT->SetDx( xShift ); // translation
- matLtoT->SetDy( yShift );
- matLtoT->SetDz( zShift );
- rotMatrix[0]= 0; rotMatrix[1]= 1; rotMatrix[2]= 0; // + rotation
- rotMatrix[3]= 1; rotMatrix[4]= 0; rotMatrix[5]= 0;
- rotMatrix[6]= 0; rotMatrix[7]= 0; rotMatrix[8]=-1;
- if (yFlip) rotMatrix[3] = -1; // flipping in y (for SPD1)
- if (yFlip) rotMatrix[1] = -1; // flipping in y (for SPD1)
-
- if (yRot180) { // rotation of pi around the axis perpendicular to the wafer
- if (yFlip) matLtoT->SetDx( -xShift ); // flipping in y (for SPD1)
- matLtoT->SetDy( -yShift );
- matLtoT->SetDz( -zShift );
- rotMatrix[8]=1;
- rotMatrix[3] = -1;
- if (yFlip) rotMatrix[3] = 1; // flipping in y (for SPD1)
- }
-
- TGeoRotation rot;
- rot.SetMatrix(rotMatrix);
- matLtoT->MultiplyLeft(&rot);
- TGeoHMatrix *matTtoL = new TGeoHMatrix(matLtoT->Inverse());
- delete matLtoT;
- alignableEntry->SetMatrix(matTtoL);
-}
-
-//______________________________________________________________________
-void AliITSv11Hybrid::AddAlignableVolumes() const{
- // Creates entries for alignable volumes associating the symbolic volume
- // name with the corresponding volume path.
- //
- // Records in the alignable entries the transformation matrices converting
- // TGeo local coordinates (in the RS of alignable volumes) to the tracking
- // system
- // For this, this function has to run before the misalignment because we
- // are using the ideal positions in the AliITSgeom object.
- // Inputs:
- // none.
- // Outputs:
- // none.
- // Return:
- // none.
-
- AliInfo("Add ITS alignable volumes");
-
- if (!gGeoManager) {
- AliFatal("TGeoManager doesn't exist !");
- return;
- }
-
- AliGeomManager::ELayerID layerId;
- Int_t modUID, modnum;
-
- if( !gGeoManager->SetAlignableEntry("ITS","ALIC_1/ITSV_1") )
- AliFatal(Form("Unable to set alignable entry ! %s :: %s",
- "ITS","ALIC_1/ITSV_1"));
-
- TString strSPD = "ITS/SPD";
- TString strSDD = "ITS/SDD";
- TString strSSD = "ITS/SSD";
- TString strStave = "/Stave";
- TString strHalfStave = "/HalfStave";
- TString strLadder = "/Ladder";
- TString strSector = "/Sector";
- TString strSensor = "/Sensor";
- TString strEntryName1;
- TString strEntryName2;
- TString strEntryName3;
- TString strEntryName4;
-
- //===== SPD layers =====
-
- if (AliITSInitGeometry::SPDIsTGeoNative()) { // new SPD geometry
-
- TString str0 = "ALIC_1/ITSV_1/ITSSPD_1/ITSSPDCarbonFiberSectorV_";
- TString str1 = "/ITSSPDSensitiveVirtualvolumeM0_1/ITSSPDlay1-Stave_";
- TString str1Bis = "/ITSSPDhalf-Stave";
- TString str1Tierce = "_1";
- TString str2 = "/ITSSPDlay1-Ladder_";
-
- TString sector;
- TString stave;
- TString halfStave;
- TString module;
-
- layerId = AliGeomManager::kSPD1;
- modnum = 0;
-
- for(Int_t cSect = 0; cSect<10; cSect++) {
-
- sector = str0;
- sector += cSect+1; // this is one full sector
- strEntryName1 = strSPD;
- strEntryName1 += 0;
- strEntryName1 += strSector;
- strEntryName1 += cSect;
- if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),sector.Data()))
- AliFatal(Form("New lay 1: Unable to set alignable entry 1! %s::%s",
- strEntryName1.Data(),sector.Data()));
-
- for(Int_t cStave=0; cStave<2; cStave++) {
-
- stave = sector;
- stave += str1;
- stave += cStave+1;
- strEntryName2 = strEntryName1;
- strEntryName2 += strStave;
- strEntryName2 += cStave;
-
- for(Int_t cHS=0; cHS<2; cHS++) {
-
- halfStave = stave;
- halfStave += str1Bis;
- halfStave += cHS;
- halfStave += str1Tierce;
- strEntryName3 = strEntryName2;
- strEntryName3 += strHalfStave;
- strEntryName3 += cHS;
-
- if(!gGeoManager->SetAlignableEntry(strEntryName3.Data(),
- halfStave.Data()))
- AliFatal(Form("New lay 1: Unable to set alignable entry 3! %s::%s",
- strEntryName3.Data(),halfStave.Data()));
-
- for(Int_t cLad=0; cLad<2; cLad++) {
-
- modUID = AliGeomManager::LayerToVolUID(layerId,modnum++);
- module = halfStave;
- module += str2;
- module += cLad+cHS*2+1;
- strEntryName4 = strEntryName3;
- strEntryName4 += strLadder;
- strEntryName4 += cLad+cHS*2;
- if(!gGeoManager->SetAlignableEntry(strEntryName4.Data(),module.Data(),modUID))
- AliFatal(Form("New lay 1: Unable to set alignable entry 4! %s::%s",
- strEntryName4.Data(),module.Data()));
-
- SetT2Lmatrix(modUID, 0.0081, kTRUE, kTRUE);
- // 0.0081 is the shift between the centers of alignable
- // and sensitive volumes. It is directly extracted from
- // the new SPD geometry
- } // end for cLad
- } // end for cHS
- } // end for cStave
- } // end for cSect
-
- layerId = AliGeomManager::kSPD2;
- modnum = 0;
- str1 = "/ITSSPDSensitiveVirtualvolumeM0_1/ITSSPDlay2-Stave_";
- str2 = "/ITSSPDlay2-Ladder_";
-
- for(Int_t cSect = 0; cSect<10; cSect++) {
-
- sector = str0;
- sector += cSect+1; // this is one full sector
- strEntryName1 = strSPD;
- strEntryName1 += 1;
- strEntryName1 += strSector;
- strEntryName1 += cSect;
-
- for(Int_t cStave=0; cStave<4; cStave++) {
-
- stave = sector;
- stave += str1;
- stave += cStave+1;
- strEntryName2 = strEntryName1;
- strEntryName2 += strStave;
- strEntryName2 += cStave;
-
- for(Int_t cHS=0; cHS<2; cHS++) {
-
- halfStave = stave;
- halfStave += str1Bis;
- halfStave += cHS;
- halfStave += str1Tierce;
- strEntryName3 = strEntryName2;
- strEntryName3 += strHalfStave;
- strEntryName3 += cHS;
-
- if(!gGeoManager->SetAlignableEntry(strEntryName3.Data(),
- halfStave.Data()))
- AliFatal(Form("New lay 2: Unable to set alignable entry 3! %s::%s",
- strEntryName3.Data(),halfStave.Data()));
-
- for(Int_t cLad=0; cLad<2; cLad++) {
-
- modUID = AliGeomManager::LayerToVolUID(layerId,modnum++);
- module = halfStave;
- module += str2;
- module += cLad+cHS*2 +1;
- strEntryName4 = strEntryName3;
- strEntryName4 += strLadder;
- strEntryName4 += cLad+cHS*2;
- if(!gGeoManager->SetAlignableEntry(strEntryName4.Data(),module.Data(),modUID))
- AliFatal(Form("New lay 2: Unable to set alignable entry 4! %s::%s",
- strEntryName4.Data(),module.Data()));
-
- SetT2Lmatrix(modUID, -0.0081, kFALSE);
- } // end for cLad
- } // end for cHS
- } // end for cStave
- } // cSect
-
- } else { // else old SPD geometry
-
- TString str0 = "ALIC_1/ITSV_1/ITSD_1/IT12_1/I12B_";
- TString str1 = "/I10B_";
- TString str1Bis = "/L1H-STAVE";
- TString str1Tierce = "_1";
- TString str2 = "/I107_";
-
- TString sector;
- TString stave;
- TString halfStave;
- TString module;
-
- layerId = AliGeomManager::kSPD1;
- modnum = 0;
-
- for(Int_t cSect = 0; cSect<10; cSect++) {
-
- sector = str0;
- sector += cSect+1; // this is one full sector
- strEntryName1 = strSPD;
- strEntryName1 += 0;
- strEntryName1 += strSector;
- strEntryName1 += cSect;
- if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),sector.Data()))
- AliFatal(Form("Old lay1: Unable to set alignable entry 1! %s::%s",
- strEntryName1.Data(),sector.Data()));
-
- for(Int_t cStave = 0; cStave<2; cStave++) {
-
- stave = sector;
- stave += str1;
- stave += cStave+1;
- strEntryName2 = strEntryName1;
- strEntryName2 += strStave;
- strEntryName2 += cStave;
- // this is a stave
- //printf("%s == %s\n",strEntryName2.Data(),stave.Data());
-
- for(Int_t cHS=0; cHS<2; cHS++) {
-
- halfStave = stave;
- halfStave += str1Bis;
- halfStave += cHS;
- halfStave += str1Tierce;
- strEntryName3 = strEntryName2;
- strEntryName3 += strHalfStave;
- strEntryName3 += cHS;
- // this is a half-stave
- //printf("%s == %s\n",strEntryName3.Data(),halfStave.Data());
- if(!gGeoManager->SetAlignableEntry(strEntryName3.Data(),
- halfStave.Data()))
- AliFatal(Form("Old lay 1: Unable to set alignable entry 3! %s::%s",
- strEntryName3.Data(),halfStave.Data()));
-
- for(Int_t cLadder = 0; cLadder<2; cLadder++) {
-
- modUID = AliGeomManager::LayerToVolUID(layerId,modnum++);
- module = halfStave;
- module += str2;
- module += cLadder+cHS*2+1;
- strEntryName4 = strEntryName3;
- strEntryName4 += strLadder;
- strEntryName4 += cLadder+cHS*2;
- //printf("%s == %s\n",strEntryName4.Data(),module.Data());
- if(!gGeoManager->SetAlignableEntry(strEntryName4.Data(),module.Data(),modUID))
- AliFatal(Form("Old lay 1: Unable to set alignable entry 4! %s::%s",
- strEntryName4.Data(),module.Data()));
-
- SetT2Lmatrix(modUID, -fChip1*0.0001/2., kTRUE);
- } // end for cLadder
- } // end for cHS
- } // end for cStave
- } // end for cSect
-
- layerId = AliGeomManager::kSPD2;
- modnum = 0;
-
- str1Bis = "/L2H-STAVE";
- str1 = "/I20B_";
- str2 = "/I1D7_";
-
- for(Int_t cSect = 0; cSect<10; cSect++) {
-
- sector = str0;
- sector += cSect+1; // this is one full sector
- strEntryName1 = strSPD;
- strEntryName1 += 1;
- strEntryName1 += strSector;
- strEntryName1 += cSect;
- //if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),sector.Data()))
- // AliFatal(Form("Unable to set alignable entry!!");
- // we don't need the previous lines because the whole sector is
- // already define with first layer ...
-
- for(Int_t cStave =0; cStave<4; cStave++) {
-
- stave = sector;
- stave += str1;
- stave += cStave+1;
- strEntryName2 = strEntryName1;
- strEntryName2 += strStave;
- strEntryName2 += cStave;
-
- for(Int_t cHS=0; cHS<2; cHS++) {
-
- halfStave = stave;
- halfStave += str1Bis;
- halfStave += cHS;
- halfStave += str1Tierce;
- strEntryName3 = strEntryName2;
- strEntryName3 += strHalfStave;
- strEntryName3 += cHS;
- // this is a half-stave
- //printf("%s == %s\n",strEntryName3.Data(),halfStave.Data());
- if(!gGeoManager->SetAlignableEntry(strEntryName3.Data(),
- halfStave.Data()))
- AliFatal(Form("Old lay 2: Unable to set alignable entry 3! %s::%s",
- strEntryName3.Data(),halfStave.Data()));
-
- for(Int_t cLad =0; cLad<2; cLad++) {
-
- modUID = AliGeomManager::LayerToVolUID(layerId,modnum++);
- module = halfStave;
- module += str2;
- module += cLad+cHS*2+1;
- strEntryName4 = strEntryName3;
- strEntryName4 += strLadder;
- strEntryName4 += cLad+cHS*2;
- //printf("%s == %s\n",strEntryName4.Data(),module.Data());
- if(!gGeoManager->SetAlignableEntry(strEntryName4.Data(),module.Data(),modUID))
- AliFatal(Form("Old lay2: Unable to set alignable entry 4! %s::%s",
- strEntryName4.Data(),module.Data()));
-
- SetT2Lmatrix(modUID, -fChip2*0.0001/2., kFALSE);
- } // end for cLad
- } // end for cHS
- } // end for cStave
- } // end for cSect
- } // end if AliITSInitGeometry::SPSIsTGeoNative().
-
- //===== SDD layers =====
- if (AliITSInitGeometry::SDDIsTGeoNative()) { // new SDD geometry
-
- layerId = AliGeomManager::kSDD1;
- modnum = 0;
- TString str0 = "/ALIC_1/ITSV_1/ITSsddLayer3_1/ITSsddLadd_"; // SDD layer1
- TString str1 = "/ITSsddSensor3_";
- TString ladder;
- TString sensor;
-
- for(Int_t c1 = 0; c1<14; c1++) {
-
- ladder = str0;
- ladder += c1; // the set of wafers from one ladder
- strEntryName1 = strSDD;
- strEntryName1 += 2;
- strEntryName1 +=strLadder;
- strEntryName1 += c1;
- //printf("%s == %s\n",strEntryName1.Data(),ladder.Data());
- if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),ladder.Data()))
- AliFatal(Form("Unable to set alignable entry 1! %s :: %s",
- strEntryName1.Data(),ladder.Data()));
-
- for(Int_t c2 =0; c2<6; c2++) {
-
- modUID = AliGeomManager::LayerToVolUID(layerId,modnum++);
- sensor = ladder;
- sensor += str1;
- sensor += c2;
- strEntryName2 = strEntryName1;
- strEntryName2 += strSensor;
- strEntryName2 += c2;
- //printf("%s == %s\n",strEntryName2.Data(),wafer.Data());
- if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),sensor.Data(),modUID))
- AliFatal(Form("Unable to set alignable entry 2! %s :: %s",
- strEntryName2.Data(),sensor.Data()));
-
- SetT2Lmatrix(modUID, 0, kFALSE, c2>=3);
- }
- }
-
- layerId = AliGeomManager::kSDD2;
- modnum = 0;
- str0 = "/ALIC_1/ITSV_1/ITSsddLayer4_1/ITSsddLadd_"; // SDD layer2
- str1 = "/ITSsddSensor4_";
-
- for(Int_t c1 = 0; c1<22; c1++) {
-
- ladder = str0;
- ladder += c1; // the set of wafers from one ladder
- strEntryName1 = strSDD;
- strEntryName1 += 3;
- strEntryName1 += strLadder;
- strEntryName1 += c1;
- //printf("%s == %s\n",strEntryName1.Data(),ladder.Data());
- if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),ladder.Data()))
- AliFatal(Form("Unable to set alignable entry 1! %s :: %s",
- strEntryName1.Data(),ladder.Data()));
-
- for(Int_t c2 =0; c2<8; c2++) {
-
- modUID = AliGeomManager::LayerToVolUID(layerId,modnum++);
- sensor = ladder;
- sensor += str1;
- sensor += c2;
- strEntryName2 = strEntryName1;
- strEntryName2 += strSensor;
- strEntryName2 += c2;
- //printf("%s == %s\n",strEntryName2.Data(),wafer.Data());
- if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),sensor.Data(),modUID))
- AliFatal(Form("Unable to set alignable entry 2! %s :: %s",
- strEntryName2.Data(),sensor.Data()));
-
- SetT2Lmatrix(modUID, 0, kFALSE, c2>=4);
- }
- }
-
- } else { // else old SDD geometry
-
- layerId = AliGeomManager::kSDD1;
- modnum = 0;
-
- TString str0 = "ALIC_1/ITSV_1/ITSD_1/IT34_1/I004_";
- TString str1 = "/I302_";
-
- TString ladder;
- TString wafer;
-
- for(Int_t c1 = 1; c1<=14; c1++){
-
- ladder = str0;
- ladder += c1; // the set of wafers from one ladder
- strEntryName1 = strSDD;
- strEntryName1 += 2;
- strEntryName1 +=strLadder;
- strEntryName1 += (c1-1);
- if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),ladder.Data()))
- AliFatal(Form("Unable to set alignable entry 1! %s :: %s",
- strEntryName1.Data(),ladder.Data()));
-
- for(Int_t c2 =1; c2<=6; c2++){
-
- modUID = AliGeomManager::LayerToVolUID(layerId,modnum++);
- wafer = ladder;
- wafer += str1;
- wafer += c2; // one wafer
- strEntryName2 = strEntryName1;
- strEntryName2 += strSensor;
- strEntryName2 += (c2-1);
- if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),wafer.Data(),modUID))
- AliFatal(Form("Unable to set alignable entry 2! %s :: %s",
- strEntryName2.Data(),wafer.Data()));
-
- SetT2Lmatrix(modUID, 0, kFALSE);
- }
- }
-
- layerId = AliGeomManager::kSDD2;
- modnum = 0;
- str0 = "ALIC_1/ITSV_1/ITSD_1/IT34_1/I005_";
- str1 = "/I402_";
-
- for(Int_t c1 = 1; c1<=22; c1++){
-
- ladder = str0;
- ladder += c1; // the set of wafers from one ladder
- strEntryName1 = strSDD;
- strEntryName1 += 3;
- strEntryName1 +=strLadder;
- strEntryName1 += (c1-1);
- if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),ladder.Data()))
- AliFatal(Form("Unable to set alignable entry 1! %s :: %s",
- strEntryName1.Data(),ladder.Data()));
-
- for(Int_t c2 =1; c2<=8; c2++){
-
- modUID = AliGeomManager::LayerToVolUID(layerId,modnum++);
- wafer = ladder;
- wafer += str1;
- wafer += c2; // one wafer
- strEntryName2 = strEntryName1;
- strEntryName2 += strSensor;
- strEntryName2 += (c2-1);
- if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),wafer.Data(),modUID))
- AliFatal(Form("Unable to set alignable entry 2! %s,%s",
- strEntryName2.Data(),wafer.Data()));
-
- SetT2Lmatrix(modUID, 0, kFALSE);
- }
- }
- } // end SDD
-
- //===== SSD layers =====
- if (AliITSInitGeometry::SSDIsTGeoNative()) { // new SSD geometry
-
- layerId = AliGeomManager::kSSD1;
- modnum = 0;
- TString str0 = "/ALIC_1/ITSV_1/ITSssdLayer5_1/ITSssdLay5Ladd_";//SSD layer1
- TString str1 = "/ITSssdSensor5_";
- TString str2 = "";
- TString ladder;
- TString wafer;
-
- for(Int_t c1 = 0; c1<34; c1++) {
-
- ladder = str0;
- ladder += c1; // the set of wafers from one ladder
- strEntryName1 = strSSD;
- strEntryName1 += 4;
- strEntryName1 += strLadder;
- strEntryName1 += c1;
- //printf("%s == %s\n",strEntryName1.Data(),ladder.Data());
- if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),ladder.Data()))
- AliFatal(Form("Unable to set alignable entry 1! %s :: %s",
- strEntryName1.Data(),ladder.Data()));
-
- for(Int_t c2 =0; c2<22; c2++) {
-
- modUID = AliGeomManager::LayerToVolUID(layerId,modnum++);
- wafer = ladder;
- wafer += str1;
- wafer += c2;
- //wafer += str2; // one wafer
- strEntryName2 = strEntryName1;
- strEntryName2 += strSensor;
- strEntryName2 += c2;
- //printf("%s == %s\n",strEntryName2.Data(),wafer.Data());
- if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),wafer.Data(),modUID))
- AliFatal(Form("Unable to set alignable entry 2! %s :: %s",
- strEntryName2.Data(),wafer.Data()));
-
- SetT2Lmatrix(modUID, 0, kFALSE, kFALSE);
- }
- }
-
- layerId = AliGeomManager::kSSD2;
- modnum = 0;
- str0 = "/ALIC_1/ITSV_1/ITSssdLayer6_1/ITSssdLay6Ladd_"; // SSD layer2
- str1 = "/ITSssdSensor6_";
- str2 = "";
-
- for(Int_t c1 = 0; c1<38; c1++) {
-
- ladder = str0;
- ladder += c1; // the set of wafers from one ladder
- strEntryName1 = strSSD;
- strEntryName1 += 5;
- strEntryName1 += strLadder;
- strEntryName1 += c1;
- //printf("%s == %s\n",strEntryName1.Data(),ladder.Data());
- if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),ladder.Data()))
- AliFatal(Form("Unable to set alignable entry 1! %s :: %s",
- strEntryName1.Data(),ladder.Data()));
-
- for(Int_t c2 =0; c2<25; c2++) {
-
- modUID = AliGeomManager::LayerToVolUID(layerId,modnum++);
- wafer = ladder;
- wafer += str1;
- wafer += c2;
- //wafer += str2; // one wafer
- strEntryName2 = strEntryName1;
- strEntryName2 += strSensor;
- strEntryName2 += c2;
- //printf("%s == %s\n",strEntryName2.Data(),wafer.Data());
- if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),wafer.Data(),modUID))
- AliFatal(Form("Unable to set alignable entry 2! %s :: %s",
- strEntryName2.Data(),wafer.Data()));
-
- SetT2Lmatrix(modUID, 0, kFALSE, kFALSE);
- }
- }
-
- } else { // else old SSD geometry
-
- layerId = AliGeomManager::kSSD1;
- modnum = 0;
- TString str0 = "ALIC_1/ITSV_1/ITSD_1/IT56_1/I565_";
- TString str1 = "/I562_";
- TString ladder;
- TString wafer;
-
- for(Int_t c1 = 1; c1<=34; c1++){
-
- ladder = str0;
- ladder += c1; // the set of wafers from one ladder
- strEntryName1 = strSSD;
- strEntryName1 += 4;
- strEntryName1 +=strLadder;
- strEntryName1 += (c1-1);
- if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),ladder.Data()))
- AliFatal(Form("Unable to set alignable entry 1! %s :: %s",
- strEntryName1.Data(),ladder.Data()));
-
- for(Int_t c2 = 1; c2<=22; c2++){
-
- modUID = AliGeomManager::LayerToVolUID(layerId,modnum++);
- wafer = ladder;
- wafer += str1;
- wafer += c2; // one wafer
- strEntryName2 = strEntryName1;
- strEntryName2 += strSensor;
- strEntryName2 += (c2-1);
- if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),wafer.Data(),modUID))
- AliFatal(Form("Unable to set alignable entry 2! %s :: %s",
- strEntryName2.Data(),wafer.Data()));
-
- SetT2Lmatrix(modUID, 0, kFALSE);
- }
- }
-
- layerId = AliGeomManager::kSSD2;
- modnum = 0;
- str0 = "ALIC_1/ITSV_1/ITSD_1/IT56_1/I569_";
- str1 = "/I566_";
-
- for(Int_t c1 = 1; c1<=38; c1++){
-
- ladder = str0;
- ladder += c1; // the set of wafers from one ladder
- strEntryName1 = strSSD;
- strEntryName1 += 5;
- strEntryName1 +=strLadder;
- strEntryName1 += (c1-1);
- if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),ladder.Data()))
- AliFatal(Form("Unable to set alignable entry 1! %s :: %s",
- strEntryName1.Data(),ladder.Data()));
-
- for(Int_t c2 = 1; c2<=25; c2++){
-
- modUID = AliGeomManager::LayerToVolUID(layerId,modnum++);
- wafer = ladder;
- wafer += str1;
- wafer += c2; // one wafer
- strEntryName2 = strEntryName1;
- strEntryName2 += strSensor;
- strEntryName2 += (c2-1);
- if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),wafer.Data(),modUID))
- AliFatal(Form("Unable to set alignable entry 2! %s :: %s",
- strEntryName2.Data(),wafer.Data()));
-
- SetT2Lmatrix(modUID, 0, kFALSE);
- }
- }
- } // end SSD geometry
-}
-
-//______________________________________________________________________
-void AliITSv11Hybrid::CreateGeometry() {
-
- // Create the geometry and insert it in ALIC
- // It calls first the CreateOldGeometry() routine which add the
- // pieces coming from the old v10 geometry. Then the pieces from
- // the new geometry are inserting in the mother volume ITSV.
-
- TGeoManager *geoManager = gGeoManager;
-
- CreateOldGeometry();
-
- TGeoVolume *vITSV = geoManager->GetVolume("ITSV");
- TGeoVolume *vITSS = geoManager->GetVolume("ITSS");
-
-
- const Char_t *cvsDate="$Date$";
- const Char_t *cvsRevision="$Revision$";
- const Int_t kLength=100;
- Char_t vstrng[kLength];
- if(fInitGeom.WriteVersionString(vstrng,kLength,(AliITSVersion_t)IsVersion(),
- fMinorVersion,cvsDate,cvsRevision)) {
- vITSV->SetTitle(vstrng);
- vITSS->SetTitle(vstrng);
- }
-
- if (AliITSInitGeometry::SPDIsTGeoNative()) {
- fSPDgeom->SPDSector(vITSV);
- }
-
- if (AliITSInitGeometry::SDDIsTGeoNative()) {
- fSDDgeom->Layer3(vITSV);
- fSDDgeom->Layer4(vITSV);
- fSDDgeom->ForwardLayer3(vITSV);
- fSDDgeom->ForwardLayer4(vITSV);
- }
-
- if (AliITSInitGeometry::SSDIsTGeoNative()) {
- fSSDgeom->Layer5(vITSV);
- fSSDgeom->Layer6(vITSV);
- fSSDgeom->LadderSupportLayer5(vITSV);
- fSSDgeom->LadderSupportLayer6(vITSV);
- fSSDgeom->EndCapSupportSystemLayer6(vITSV);
- fSSDgeom->EndCapSupportSystemLayer5(vITSV);
- }
-
- if (AliITSInitGeometry::SPDshieldIsTGeoNative())
- fSupgeom->SPDCone(vITSV);
-
- if (AliITSInitGeometry::SDDconeIsTGeoNative())
- fSupgeom->SDDCone(vITSV);
-
- if (AliITSInitGeometry::SSDconeIsTGeoNative())
- fSupgeom->SSDCone(vITSV);
-
- if (AliITSInitGeometry::ServicesAreTGeoNative()) {
- fSDDgeom->SDDCables(vITSV);
- fSSDgeom->SSDCables(vITSV);
- fSupgeom->ServicesCableSupport(vITSS);
- }
-
- if (AliITSInitGeometry::SupportIsTGeoNative()) {
- fSupgeom->ITSTPCSupports(vITSS);
- }
-}
-
-//______________________________________________________________________
-void AliITSv11Hybrid::CreateOldGeometry(){
- // This routine defines and creates some pieces of the geometry
- // of version 10 (AliITSvPPRasymmFMD)
-
- //Begin_Html
- /*
- <img src="picts/ITS/ITS_full_vPPRasymm.jpg">
- </pre>
- <br clear=left>
- <font size=+2 color=red>
- <p>This shows the full ITS geometry.
- </font>
- <img src="picts/ITS/ITS_SPD_Barrel_vPPRasymm.jpg">
- </pre>
- < br clear=left>
- <font size=+2 color=red>
- <p>This shows the full SPD Barrel of the ITS geometry.
- </font>
- <img src="picts/ITS/ITS_SDD_Barrel_vPPRasymm.jpg">
- </pre>
- <br clear=left>
- <font size=+2 color=red>
- <p>This shows the full SDD Barrel of the ITS geometry.
- </font>
- <img src="picts/ITS/ITS_SSD_Barrel_vPPRasymm.jpg">
- </pre>
- <br clear=left>
- <font size=+2 color=red>
- <p>This shows the full SSD Barrel of the ITS geometry.
- </font>
- */
- //End_Html
- //INNER RADII OF THE SILICON LAYERS
- // Float_t rl[6] = { 3.8095,7.,15.,24.,38.1,43.5765 };
- //THICKNESSES OF LAYERS (in % radiation kLength)
- Float_t drl[6] = { 1.03,1.03,0.94,0.95,0.91,0.87 };
- //HALF LENGTHS OF LAYERS
- // Float_t dzl[6] = { 14.35,14.35,25.1,32.1,49.405,55.27 };
- //LENGTHS OF END-LADDER BOXES (ALL INCLUDED)
- // Float_t dzb[6] = { 12.4,12.4,13.5,15.,7.5,7.5 };
- //THICKNESSES OF END-LADDER BOXES (ALL INCLUDED)
- // Float_t drb[6] = { rl[1]-rl[0],0.2,5.,5.,4.,4. };
-
-
- Float_t dits[100], rlim, zmax;
- // Float_t zpos;
- // Float_t pcits[50]
- Float_t ztpc;
- Int_t idrotm[1999], i;
- Float_t dgh[100];
-
- // Define some variables for SPD
-
- Float_t dits1[3], di101[3], di107[3], di10b[3], di106[3];// for layer 1
- //Float_t di103[3], di10a[3], di102[3]; // for layer 1
- Float_t dits2[3], di1d1[3], di1d7[3], di20b[3], di1d6[3];// for layer 2
- //Float_t di1d3[3], di20a[3], di1d2[3]; // for layer 2
- Float_t di108[3];
- //Float_t di104[3]; // for both layers
-
- Float_t ddet1=200.; // total detector thickness on layer 1 (micron)
- Float_t dchip1=200.; // total chip thickness on layer 1 (micron)
-
- Float_t ddet2=200.; // total detector thickness on layer 2 (micron)
- Float_t dchip2=200.; // total chip thickness on layer 2 (micron)
-
- Float_t dbus=300.; // total bus thickness on both layers (micron)
-
- ddet1 = GetThicknessDet1();
- ddet2 = GetThicknessDet2();
- dchip1 = GetThicknessChip1();
- dchip2 = GetThicknessChip2();
-
- if(ddet1 < 100. || ddet1 > 300.) {
- AliWarning("The detector thickness for layer 1 is outside ");
- AliWarning("the range of [100,300] microns. The default value of 200 microns ");
- AliWarning("will be used.");
- ddet1=200.;
- } // end if
-
- if(ddet2 < 100. || ddet2 > 300.) {
- AliWarning("The detector thickness for layer 2 is outside ");
- AliWarning("the range of [100,300] microns. The default value of 200 microns ");
- AliWarning("will be used.");
- ddet2=200.;
- }// end if
-
- if(dchip1 < 100. || dchip1 > 300.) {
- AliWarning("The chip thickness for layer 1 is outside");
- AliWarning("the range of [100,300] microns. The default value of 200 microns");
- AliWarning("will be used.");
- dchip1=200.;
- }// end if
-
- if(dchip2 < 100. || dchip2 > 300.) {
- AliWarning("The chip thickness for layer 2 is outside");
- AliWarning("the range of [100,300] microns. The default value of 200 microns");
- AliWarning("will be used");
- dchip2=200.;
- }// end if
-
- Int_t rails = 1; // flag for rails (1 --> rails in; 0 --> rails out)
-
- Int_t fluid = 1; // flag for the cooling fluid (1 --> water; 0 --> freon)
- // This option is maintained for SDD and SSD only
- // For SPD the cooling liquid is C4F10
- rails = GetRails();
-
- fluid = GetCoolingFluid();
-
- if(rails != 0 && rails != 1) {
- AliWarning("The switch for rails is not set neither");
- AliWarning("to 0 (rails out) nor to 1 (rails in). The default value of");
- AliWarning("1 (rails in) will be used");
- rails=1;
- }// end if
-
-
- AliDebug(1,Form("Detector thickness on layer 1 is set to %f microns",ddet1));
- AliDebug(1,Form("Chip thickness on layer 1 is set to %f microns",dchip1));
- AliDebug(1,Form("Detector thickness on layer 2 is set to %f microns",ddet2));
- AliDebug(1,Form("Chip thickness on layer 2 is set to %f microns",dchip2));
- if(rails == 0 ) {
- AliDebug(1,"Rails are out.");
- } else {
- AliDebug(1,"Rails are in.");
- }// end if
-
- ddet1 = ddet1*0.0001/2.; // conversion from tot length in um to half in cm
- ddet2 = ddet2*0.0001/2.; // conversion from tot length in um to half in cm
- dchip1 = dchip1*0.0001/2.;// conversion from tot length in um to half in cm
- dchip2 = dchip2*0.0001/2.;// conversion from tot length in um to half in cm
- dbus = dbus*0.0001/2.; // conversion from tot length in um to half in cm
-
- Float_t deltax, deltay;
-
- //Int_t thickness = fMinorVersion/10;
- //Int_t option = fMinorVersion - 10*thickness;
-
-
- // Define some variables for SDD
-
- Float_t sin30, cos30;
-
- // SDD electronics+services main volumes
- Float_t iI018dits[3], iI024dits[3], iI047dits[3], iI048dits[3];
-
- // SDD detector ladder
-
- Float_t iI302dits[3], iI402dits[3], iI004dits[3], iI005dits[3];
- Float_t ySDDsep = 0.20;
- Float_t ySDD;
- Int_t iSDD;
- Float_t zSDDlay3[6] = { 18.55, 10.95, 3.70, -3.70,-11.20,-18.35};
- Float_t zSDDlay4[8] = { 25.75, 18.60, 11.00, 3.70, -3.70,-11.20,
- -18.45,-26.05};
-
- // ladder foot and end-ladder (frame and cooling)
- Float_t iI028dits[3], iI420dits[3], iI421dits[3], iI422dits[6], iI423dits[3];
- Float_t iI424dits[3], xI424, yI424;
- Float_t iI425dits[3];
- Int_t indI425;
- Float_t iI029dits[4], iI030dits[4], iI031dits[3], iI032dits[3];
-
- // SDD ladder frame and cooling
- Float_t iSDDCoolPipe[3] = {1.7000, -0.5500, 0.0000};
- Float_t iI035dits[3], iI037dits[3], iI038dits[3];
- Float_t iI039dits[3], xI039, yI039;
- Float_t iI041dits[5];
-
- // SDD hybrid, chips and capacitors
- Float_t iI050dits[3], xI050, yI050;
- Float_t iI052dits[3], xI052, yI052;
- Float_t iI042dits[3], xI042, yI042;
- Float_t xI042space = 0.17;
- Float_t iI043dits[3], xI043, yI043;
- Float_t xI043space = 0.17;
- Float_t zchip, zChipSpace;
- Float_t iI051dits[3], xI051, yI051, zI051, yI051space, xcap;
- Int_t ichip, icap;
-
- // SDD microcables
- Float_t iI044dits[4], xI044, yI044, volI044;
- Float_t xHV, yHV, zHV, xLV, yLV, zLV;
- Char_t nameHV[5], nameLV[5];
-
-
- // Define media off-set
-
- Int_t *idtmed = fIdtmed->GetArray()-199;
-
-
- // Rotation matrices
-
- // SPD - option 'b' (this is the default)
-
- //if (option == 2) {
- if (! AliITSInitGeometry::SPDIsTGeoNative()) {
- AliMatrix(idrotm[201],90.0,0.0,90.0,90.0,0.0,0.0);
- AliMatrix(idrotm[202],90.0,90.0,90.0,0.0,0.0,0.0);
- AliMatrix(idrotm[203],90.0,350.0,90.0,260.0,0.0,0.0);
- AliMatrix(idrotm[204],90.0,170.0,90.0,80.0,0.0,0.0);
- AliMatrix(idrotm[205],90.0,10.0,90.0,100.0,0.0,0.0);
- AliMatrix(idrotm[206],90.0,190.0,90.0,280.0,0.0,0.0);
- AliMatrix(idrotm[207],90.0,342.0,90.0,72.0,0.0,0.0);
- AliMatrix(idrotm[208],90.0,156.999893,90.0,246.999893,0.0,0.0);
- AliMatrix(idrotm[209],90.0,147.999802,90.0,237.999893,0.0,0.0);
- AliMatrix(idrotm[210],90.0,138.999802,90.0,228.999802,0.0,0.0);
- AliMatrix(idrotm[211],90.0,129.999802,90.0,219.999802,0.0,0.0);
- AliMatrix(idrotm[212],90.0,36.7896,90.0,126.789597,0.0,0.0);
- AliMatrix(idrotm[213],90.0,343.579712,90.0,73.579697,0.0,0.0);
- AliMatrix(idrotm[214],90.0,95.413696,90.0,185.413696,0.0,0.0);
- AliMatrix(idrotm[215],90.0,5.4141,90.0,95.414101,0.0,0.0);
- AliMatrix(idrotm[216],90.0,318.296906,90.0,48.296902,0.0,0.0);
- AliMatrix(idrotm[217],90.0,67.000099,90.0,157.000107,0.0,0.0);
- AliMatrix(idrotm[218],90.0,337.003998,90.0,67.003998,0.0,0.0);
- AliMatrix(idrotm[219],90.0,247.000305,90.0,337.000305,0.0,0.0);
- AliMatrix(idrotm[220],90.0,305.633514,90.0,35.633499,0.0,0.0);
-
- AliMatrix(idrotm[221],90.0,58.000198,90.0,148.000198,0.0,0.0);
- AliMatrix(idrotm[222],90.0,327.997101,90.0,57.997101,0.0,0.0);
- AliMatrix(idrotm[223],90.0,237.994202,90.0,327.994202,0.0,0.0);
- AliMatrix(idrotm[224],90.0,296.627502,90.0,26.627399,0.0,0.0);
- AliMatrix(idrotm[225],90.0,48.994099,90.0,138.994095,0.0,0.0);
- AliMatrix(idrotm[226],90.0,318.990997,90.0,48.991001,0.0,0.0);
- AliMatrix(idrotm[227],90.0,228.988205,90.0,318.98819,0.0,0.0);
- AliMatrix(idrotm[228],90.0,287.621399,90.0,17.621401,0.0,0.0);
- AliMatrix(idrotm[229],90.0,39.988098,90.0,129.988098,0.0,0.0);
- AliMatrix(idrotm[230],90.0,309.984985,90.0,39.985001,0.0,0.0);
- AliMatrix(idrotm[231],90.0,327.2612,90.0,57.2612,0.0,0.0);
- AliMatrix(idrotm[232],90.0,237.261398,90.0,327.261414,0.0,0.0);
- AliMatrix(idrotm[233],90.0,252.000504,90.0,342.000488,0.0,0.0);
- AliMatrix(idrotm[234],90.0,71.9991,90.0,161.9991,0.0,0.0);
- AliMatrix(idrotm[235],90.0,270.0,90.0,0.0,0.0,0.0);
- AliMatrix(idrotm[236],90.0,180.013702,90.0,270.013702,0.0,0.0);
- AliMatrix(idrotm[237],90.0,90.0,90.0,180.0,0.0,0.0);
- AliMatrix(idrotm[238],90.0,180.0,90.0,270.0,0.0,0.0);
- AliMatrix(idrotm[239],90.0,162.0,90.0,252.0,0.0,0.0);
- AliMatrix(idrotm[240],90.0,310.0,90.0,40.0,0.0,0.0);
- AliMatrix(idrotm[241],90.0,319.0,90.0,49.0,0.0,0.0);
- AliMatrix(idrotm[242],90.0,328.0,90.0,58.0,0.0,0.0);
- AliMatrix(idrotm[243],90.0,337.0,90.0,67.0,0.0,0.0);
- AliMatrix(idrotm[244],90.0,216.0,90.0,306.0,0.0,0.0);
- AliMatrix(idrotm[245],90.0,36.0,90.0,126.0,0.0,0.0);
- AliMatrix(idrotm[246],90.0,108.0,90.0,198.0,0.0,0.0);
- AliMatrix(idrotm[247],90.0,144.0,90.0,234.0,0.0,0.0);
- AliMatrix(idrotm[248],90.0,288.0,90.0,18.0,0.0,0.0);
- AliMatrix(idrotm[249],90.0,324.0,90.0,54.0,0.0,0.0);
- AliMatrix(idrotm[1003],90.0,73.5,90.0,163.5,0.0,0.0);
- AliMatrix(idrotm[1011],90.0,342.0,90.0,72.0,0.0,0.0);
- AliMatrix(idrotm[1039],90.0,72.0,90.0,162.0,0.0,0.0);
- AliMatrix(idrotm[1043],90.0,66.91,90.0,156.91,0.0,0.0);
- AliMatrix(idrotm[1065],90.0,144.0,90.0,234.0,0.0,0.0);
- AliMatrix(idrotm[1078],90.0,180.0,90.0,270.0,0.0,0.0);
- AliMatrix(idrotm[1088],90.0,57.41,90.0,147.41,0.0,0.0);
- AliMatrix(idrotm[1089],90.0,333.0,90.0,63.0,0.0,0.0);
- AliMatrix(idrotm[1090],90.0,351.0,90.0,81.0,0.0,0.0);
- AliMatrix(idrotm[1091],90.0,216.0,90.0,306.0,0.0,0.0);
- AliMatrix(idrotm[1092],90.0,27.0,90.0,117.0,0.0,0.0);
- AliMatrix(idrotm[1093],90.0,18.0,90.0,108.0,0.0,0.0);
- AliMatrix(idrotm[1094],90.0,9.0,90.0,99.0,0.0,0.0);
- AliMatrix(idrotm[1104],90.0,252.0,90.0,342.0,0.0,0.0);
- AliMatrix(idrotm[1106],90.0,36.0,90.0,126.0,0.0,0.0);
- AliMatrix(idrotm[1107],90.0,108.0,90.0,198.0,0.0,0.0);
- AliMatrix(idrotm[1108],90.0,324.0,90.0,54.0,180.0,0.0);
- AliMatrix(idrotm[1109],90.0,0.0,90.0,90.0,180.0,0.0);
- AliMatrix(idrotm[1110],90.0,36.0,90.0,126.0,180.0,0.0);
- AliMatrix(idrotm[1111],90.0,72.0,90.0,162.0,180.0,0.0);
- AliMatrix(idrotm[1112],90.0,108.0,90.0,198.0,180.0,0.0);
- AliMatrix(idrotm[1113],90.0,144.0,90.0,234.0,180.0,0.0);
- AliMatrix(idrotm[1114],90.0,180.0,90.0,270.0,180.0,0.0);
- AliMatrix(idrotm[1115],90.0,216.0,90.0,306.0,180.0,0.0);
- AliMatrix(idrotm[1116],90.0,252.0,90.0,342.0,180.0,0.0);
- AliMatrix(idrotm[1117],90.0,288.0,90.0,18.0,0.0,0.0);
- AliMatrix(idrotm[1118],90.0,288.0,90.0,18.0,180.0,0.0);
- AliMatrix(idrotm[1130],90.0,324.0,90.0,54.0,0.0,0.0);
- }// end if option==2
-
- // SDD
- if (! AliITSInitGeometry::SDDIsTGeoNative()) {
- AliMatrix(idrotm[301],0.0,0.0,90.0,90.0,90.0,180.0);
- AliMatrix(idrotm[302],0.0,0.0,90.0,90.0,90.0,0.0);
- AliMatrix(idrotm[303],180.0,0.0,90.0,90.0,90.0,0.0);
- AliMatrix(idrotm[304],180.0,0.0,90.0,90.0,90.0,180.0);
- AliMatrix(idrotm[305],90.0,347.14,90.0,77.14,0.0,0.0);
- AliMatrix(idrotm[306],90.0,321.43,90.0,51.43,0.0,0.0);
- AliMatrix(idrotm[307],90.0,295.71,90.0,25.71,0.0,0.0);
- AliMatrix(idrotm[308],90.0,244.29,90.0,334.29,0.0,0.0);
- AliMatrix(idrotm[309],90.0,218.57,90.0,308.57,0.0,0.0);
- AliMatrix(idrotm[310],90.0,167.14,90.0,257.14,0.0,0.0);
- AliMatrix(idrotm[311],90.0,141.43,90.0,231.43,0.0,0.0);
- AliMatrix(idrotm[312],90.0,0.0,0.0,0.0,90.0,270.0);
- AliMatrix(idrotm[313],90.0,115.71,90.0,205.71,0.0,0.0);
- AliMatrix(idrotm[314],90.0,335.45,90.0,65.45,0.0,0.0);
- AliMatrix(idrotm[315],90.0,319.09,90.0,49.09,0.0,0.0);
- AliMatrix(idrotm[316],90.0,302.73,90.0,32.73,0.0,0.0);
- AliMatrix(idrotm[317],90.0,286.36,90.0,16.36,0.0,0.0);
- AliMatrix(idrotm[318],90.0,270.0,90.0,360.0,0.0,0.0);
- AliMatrix(idrotm[319],90.0,253.64,90.0,343.64,0.0,0.0);
- AliMatrix(idrotm[320],90.0,237.27,90.0,327.27,0.0,0.0);
- AliMatrix(idrotm[321],90.0,12.86,90.0,102.86,0.0,0.0);
- AliMatrix(idrotm[322],90.0,220.91,90.0,310.91,0.0,0.0);
- AliMatrix(idrotm[323],90.0,204.55,90.0,294.55,0.0,0.0);
- AliMatrix(idrotm[324],90.0,188.18,90.0,278.18,0.0,0.0);
- AliMatrix(idrotm[325],90.0,171.82,90.0,261.82,0.0,0.0);
- AliMatrix(idrotm[326],90.0,155.45,90.0,245.45,0.0,0.0);
- AliMatrix(idrotm[327],90.0,139.09,90.0,229.09,0.0,0.0);
- AliMatrix(idrotm[328],90.0,122.73,90.0,212.73,0.0,0.0);
- AliMatrix(idrotm[329],90.0,106.36,90.0,196.36,0.0,0.0);
- AliMatrix(idrotm[330],90.0,73.64,90.0,163.64,0.0,0.0);
- AliMatrix(idrotm[331],90.0,40.91,90.0,130.91,0.0,0.0);
- AliMatrix(idrotm[332],90.0,24.55,90.0,114.55,0.0,0.0);
- AliMatrix(idrotm[333],90.0,38.57,90.0,128.57,0.0,0.0);
- AliMatrix(idrotm[334],90.0,351.82,90.0,81.82,0.0,0.0);
- AliMatrix(idrotm[335],90.0,8.18,90.0,98.18,0.0,0.0);
- AliMatrix(idrotm[336],90.0,64.29,90.0,154.29,0.0,0.0);
- AliMatrix(idrotm[337],111.0,300.0,21.0,300.0,90.0,30.0);
- AliMatrix(idrotm[338],69.0,240.0,159.0,240.0,90.0,150.0);
- AliMatrix(idrotm[339],111.0,240.0,21.0,240.0,90.0,150.0);
- AliMatrix(idrotm[340],69.0,300.0,159.0,300.0,90.0,30.0);
- AliMatrix(idrotm[341],128.0,0.0,38.0,0.0,90.0,270.0);
- AliMatrix(idrotm[342],90.0,240.0,180.0,0.0,90.0,330.);
- AliMatrix(idrotm[343],90.0,120.0,180.0,0.0,90.0,210.0);
- AliMatrix(idrotm[344],90.0,0.0,180.0,0.0,90.0,90.0);
- AliMatrix(idrotm[345],90.0,180.0,90.0,90.0,0.0,0.0);
- AliMatrix(idrotm[346],90.0,300.0,90.0,30.0,0.0,0.0);
- AliMatrix(idrotm[347],90.0,240.0,90.0,150.0,0.0,0.0);
- AliMatrix(idrotm[348],90.0,180.0,0.0,0.0,90.0,270.0);
- AliMatrix(idrotm[349],90.0,235.0,90.0,145.0,0.0,0.0);
- AliMatrix(idrotm[350],90.0,90.0,90.0,180.0,0.0,0.0);
- AliMatrix(idrotm[351],90.0,305.0,90.0,35.0,0.0,0.0);
- AliMatrix(idrotm[352],0.0,0.0,90.0,0.0,90.0,90.0);
- AliMatrix(idrotm[353],90.0,60.0,90.0,150.0,0.0,0.0);
- AliMatrix(idrotm[354],90.0,120.0,90.0,30.0,0.0,0.0);
- AliMatrix(idrotm[355],90.0,180.0,90.0,90.0,180.0,0.0);
- AliMatrix(idrotm[356],90.0,270.0,90.0,0.0,0.0,0.0);
- AliMatrix(idrotm[366],90.0,57.27,90.0,147.27,0.0,0.0);
- AliMatrix(idrotm[386],90.0,192.86,90.0,282.86,0.0,0.0);
- }
-
- // SSD
- if (! AliITSInitGeometry::SSDIsTGeoNative()) {
- AliMatrix(idrotm[501],90.0,148.24,90.0,238.24,0.0,0.0);
- AliMatrix(idrotm[503],90.0,137.65,90.0,227.65,0.0,0.0);
- AliMatrix(idrotm[504],90.0,127.06,90.0,217.06,0.0,0.0);
- AliMatrix(idrotm[505],90.0,116.47,90.0,206.47,0.0,0.0);
- AliMatrix(idrotm[506],90.0,105.88,90.0,195.88,0.0,0.0);
- AliMatrix(idrotm[507],90.0,95.29,90.0,185.29,0.0,0.0);
- AliMatrix(idrotm[508],90.0,84.71,90.0,174.71,0.0,0.0);
- AliMatrix(idrotm[509],90.0,74.12,90.0,164.12,0.0,0.0);
- AliMatrix(idrotm[510],90.0,63.53,90.0,153.53,0.0,0.0);
- AliMatrix(idrotm[511],90.0,52.94,90.0,142.94,0.0,0.0);
- AliMatrix(idrotm[512],90.0,42.35,90.0,132.35,0.0,0.0);
- AliMatrix(idrotm[513],90.0,31.76,90.0,121.76,0.0,0.0);
- AliMatrix(idrotm[514],90.0,10.59,90.0,100.59,0.0,0.0);
- AliMatrix(idrotm[515],90.0,349.41,90.0,79.41,0.0,0.0);
- AliMatrix(idrotm[516],90.0,338.82,90.0,68.82,0.0,0.0);
- AliMatrix(idrotm[517],90.0,328.24,90.0,58.24,0.0,0.0);
- AliMatrix(idrotm[518],90.0,317.65,90.0,47.65,0.0,0.0);
- AliMatrix(idrotm[519],90.0,307.06,90.0,37.06,0.0,0.0);
- AliMatrix(idrotm[520],90.0,296.47,90.0,26.47,0.0,0.0);
- AliMatrix(idrotm[521],90.0,285.88,90.0,15.88,0.0,0.0);
- AliMatrix(idrotm[522],90.0,275.29,90.0,5.29,0.0,0.0);
- AliMatrix(idrotm[523],90.0,264.71,90.0,354.71,0.0,0.0);
- AliMatrix(idrotm[524],90.0,254.12,90.0,344.12,0.0,0.0);
- AliMatrix(idrotm[525],90.0,243.53,90.0,333.53,0.0,0.0);
- AliMatrix(idrotm[526],90.0,232.94,90.0,322.94,0.0,0.0);
- AliMatrix(idrotm[527],90.0,222.35,90.0,312.35,0.0,0.0);
- AliMatrix(idrotm[528],90.0,211.76,90.0,301.76,0.0,0.0);
- AliMatrix(idrotm[529],90.0,190.59,90.0,280.59,0.0,0.0);
- AliMatrix(idrotm[530],90.0,169.41,90.0,259.41,0.0,0.0);
- AliMatrix(idrotm[531],90.0,158.82,90.0,248.82,0.0,0.0);
- AliMatrix(idrotm[532],90.0,360.0,90.0,90.0,0.0,0.0);
- AliMatrix(idrotm[533],90.0,180.0,90.0,270.0,0.0,0.0);
- AliMatrix(idrotm[534],90.0,189.47,90.0,279.47,0.0,0.0);
- AliMatrix(idrotm[535],90.0,198.95,90.0,288.95,0.0,0.0);
- AliMatrix(idrotm[537],90.0,217.89,90.0,307.89,0.0,0.0);
- AliMatrix(idrotm[538],90.0,227.37,90.0,317.37,0.0,0.0);
- AliMatrix(idrotm[539],90.0,236.84,90.0,326.84,0.0,0.0);
- AliMatrix(idrotm[540],90.0,246.32,90.0,336.32,0.0,0.0);
- AliMatrix(idrotm[541],90.0,255.79,90.0,345.79,0.0,0.0);
- AliMatrix(idrotm[542],90.0,265.26,90.0,355.26,0.0,0.0);
- AliMatrix(idrotm[543],90.0,274.74,90.0,4.74,0.0,0.0);
- AliMatrix(idrotm[544],90.0,284.21,90.0,14.21,0.0,0.0);
- AliMatrix(idrotm[545],90.0,293.68,90.0,23.68,0.0,0.0);
- AliMatrix(idrotm[546],90.0,303.16,90.0,33.16,0.0,0.0);
- AliMatrix(idrotm[547],90.0,312.63,90.0,42.63,0.0,0.0);
- AliMatrix(idrotm[548],90.0,322.11,90.0,52.11,0.0,0.0);
- AliMatrix(idrotm[549],90.0,331.58,90.0,61.58,0.0,0.0);
- AliMatrix(idrotm[550],90.0,341.05,90.0,71.05,0.0,0.0);
- AliMatrix(idrotm[551],90.0,350.53,90.0,80.53,0.0,0.0);
- AliMatrix(idrotm[552],90.0,9.47,90.0,99.47,0.0,0.0);
- AliMatrix(idrotm[553],90.0,18.95,90.0,108.95,0.0,0.0);
- AliMatrix(idrotm[555],90.0,37.89,90.0,127.89,0.0,0.0);
- AliMatrix(idrotm[556],90.0,47.37,90.0,137.37,0.0,0.0);
- AliMatrix(idrotm[557],90.0,56.84,90.0,146.84,0.0,0.0);
- AliMatrix(idrotm[558],90.0,66.32,90.0,156.32,0.0,0.0);
- AliMatrix(idrotm[559],90.0,75.79,90.0,165.79,0.0,0.0);
- AliMatrix(idrotm[560],90.0,85.26,90.0,175.26,0.0,0.0);
- AliMatrix(idrotm[561],90.0,94.74,90.0,184.74,0.0,0.0);
- AliMatrix(idrotm[562],90.0,104.21,90.0,194.21,0.0,0.0);
- AliMatrix(idrotm[563],90.0,113.68,90.0,203.68,0.0,0.0);
- AliMatrix(idrotm[564],90.0,123.16,90.0,213.16,0.0,0.0);
- AliMatrix(idrotm[565],90.0,132.63,90.0,222.63,0.0,0.0);
- AliMatrix(idrotm[566],90.0,142.11,90.0,232.11,0.0,0.0);
- AliMatrix(idrotm[567],90.0,151.58,90.0,241.58,0.0,0.0);
- AliMatrix(idrotm[568],90.0,161.05,90.0,251.05,0.0,0.0);
- AliMatrix(idrotm[569],90.0,170.53,90.0,260.53,0.0,0.0);
- AliMatrix(idrotm[570],90.0,180.0,90.0,90.0,180.0,0.0);
- AliMatrix(idrotm[571],90.0,0.0,0.0,0.0,90.0,270.0);
- AliMatrix(idrotm[572],90.0,180.0,0.0,0.0,90.0,270.0);
- AliMatrix(idrotm[573],90.0,180.0,90.0,90.0,0.0,0.0);
- AliMatrix(idrotm[575],90.0,120.0,180.0,0.0,90.0,210.0);
- AliMatrix(idrotm[576],65.71,300.0,90.0,30.0,24.29,120.0);
- AliMatrix(idrotm[577],114.29,300.0,90.0,30.0,155.71,120.0);
- AliMatrix(idrotm[579],65.71,240.0,90.0,150.0,24.29,60.0);
- AliMatrix(idrotm[580],114.29,240.0,90.0,150.0,155.71,60.0);
- AliMatrix(idrotm[581],90.0,240.0,180.0,0.0,90.0,330.0);
- AliMatrix(idrotm[583],90.0,0.0,180.0,0.0,90.0,90.0);
- AliMatrix(idrotm[584],90.0,180.0,180.0,0.0,90.0,90.0);
- AliMatrix(idrotm[586],180.0,0.0,90.0,90.0,90.0,0.0);
- AliMatrix(idrotm[618],90.0,201.18,90.0,291.18,0.0,0.0);
- AliMatrix(idrotm[620],90.0,28.42,90.0,118.42,0.0,0.0);
- AliMatrix(idrotm[623],90.0,208.42,90.0,298.42,0.0,0.0);
- AliMatrix(idrotm[633],132.46,0.0,90.0,90.0,42.46,360.0);
- AliMatrix(idrotm[653],90.0,21.18,90.0,111.18,0.0,0.0);
- }
-
- // SDD cone
- if (! AliITSInitGeometry::SDDconeIsTGeoNative()) {
- AliMatrix(idrotm[846],90.0,300.0,90.0,30.0,0.0,0.0);
- AliMatrix(idrotm[851],90.0,305.0,90.0,35.0,0.0,0.0);
- AliMatrix(idrotm[853],90.0,60.0,90.0,150.0,0.0,0.0);
- AliMatrix(idrotm[856],90.0,0.0,90.0,90.0,180.0,0.0);
- AliMatrix(idrotm[857],90.0,5.0,90.0,95.0,180.0,0.0);
- AliMatrix(idrotm[858],90.0,65.0,90.0,155.0,180.0,0.0);
- AliMatrix(idrotm[859],90.0,305.0,90.0,35.0,180.0,0.0);
- AliMatrix(idrotm[860],90.0,245.0,90.0,335.0,180.0,0.0);
- AliMatrix(idrotm[861],90.0,185.0,90.0,275.0,180.0,0.0);
- AliMatrix(idrotm[862],90.0,125.0,90.0,215.0,180.0,0.0);
- AliMatrix(idrotm[863],90.0,257.5,90.0,347.5,180.0,0.0);
- AliMatrix(idrotm[864],90.0,227.5,90.0,317.5,180.0,0.0);
- AliMatrix(idrotm[865],90.0,197.5,90.0,287.5,180.0,0.0);
- AliMatrix(idrotm[867],90.0,167.5,90.0,257.5,180.0,0.0);
- AliMatrix(idrotm[868],90.0,287.5,90.0,17.5,0.0,0.0);
- AliMatrix(idrotm[869],90.0,137.5,90.0,227.5,180.0,0.0);
- AliMatrix(idrotm[870],90.0,107.5,90.0,197.5,180.0,0.0);
- AliMatrix(idrotm[871],90.0,77.5,90.0,167.5,180.0,0.0);
- AliMatrix(idrotm[872],90.0,47.5,90.0,137.5,180.0,0.0);
- AliMatrix(idrotm[873],90.0,17.5,90.0,107.5,180.0,0.0);
- AliMatrix(idrotm[874],90.0,347.5,90.0,77.5,180.0,0.0);
- AliMatrix(idrotm[875],90.0,317.5,90.0,47.5,180.0,0.0);
- AliMatrix(idrotm[876],90.0,287.5,90.0,17.5,180.0,0.0);
- AliMatrix(idrotm[877],90.0,185.0,90.0,275.0,0.0,0.0);
- AliMatrix(idrotm[878],90.0,180.0,90.0,270.0,0.0,0.0);
- AliMatrix(idrotm[879],90.0,125.0,90.0,215.0,0.0,0.0);
- AliMatrix(idrotm[880],90.0,65.0,90.0,155.0,0.0,0.0);
- AliMatrix(idrotm[881],90.0,5.0,90.0,95.0,0.0,0.0);
- AliMatrix(idrotm[882],90.0,245.0,90.0,335.0,0.0,0.0);
- AliMatrix(idrotm[883],90.0,47.5,90.0,137.5,0.0,0.0);
- AliMatrix(idrotm[884],90.0,77.5,90.0,167.5,0.0,0.0);
- AliMatrix(idrotm[885],90.0,107.5,90.0,197.5,0.0,0.0);
- AliMatrix(idrotm[887],90.0,137.5,90.0,227.5,0.0,0.0);
- AliMatrix(idrotm[888],90.0,167.5,90.0,257.5,0.0,0.0);
- AliMatrix(idrotm[889],90.0,197.5,90.0,287.5,0.0,0.0);
- AliMatrix(idrotm[890],90.0,227.5,90.0,317.5,0.0,0.0);
- AliMatrix(idrotm[891],90.0,347.5,90.0,77.5,0.0,0.0);
- AliMatrix(idrotm[892],90.0,317.5,90.0,47.5,0.0,0.0);
- AliMatrix(idrotm[893],90.0,257.5,90.0,347.5,0.0,0.0);
- AliMatrix(idrotm[894],90.0,270.0,0.0,0.0,90.0,180.0);
- AliMatrix(idrotm[895],90.0,286.36,0.0,0.0,90.0,196.36);
- AliMatrix(idrotm[896],90.0,302.73,0.0,0.0,90.0,212.73);
- AliMatrix(idrotm[897],90.0,319.09,0.0,0.0,90.0,229.09);
- AliMatrix(idrotm[898],90.0,17.5,90.0,107.5,0.0,0.0);
- AliMatrix(idrotm[899],90.0,335.45,0.0,0.0,90.0,245.45);
- AliMatrix(idrotm[900],90.0,351.82,0.0,0.0,90.0,261.82);
- AliMatrix(idrotm[901],90.0,8.18,0.0,0.0,90.0,278.18);
- AliMatrix(idrotm[902],90.0,24.55,0.0,0.0,90.0,294.55);
- AliMatrix(idrotm[903],90.0,40.91,0.0,0.0,90.0,310.91);
- AliMatrix(idrotm[904],90.0,57.27,0.0,0.0,90.0,327.27);
- AliMatrix(idrotm[905],90.0,73.64,0.0,0.0,90.0,343.64);
- AliMatrix(idrotm[906],90.0,90.0,0.0,0.0,90.0,360.0);
- AliMatrix(idrotm[907],90.0,106.36,0.0,0.0,90.0,16.36);
- AliMatrix(idrotm[908],90.0,122.73,0.0,0.0,90.0,32.73);
- AliMatrix(idrotm[909],90.0,139.09,0.0,0.0,90.0,49.09);
- AliMatrix(idrotm[910],90.0,155.45,0.0,0.0,90.0,65.45);
- AliMatrix(idrotm[911],90.0,171.82,0.0,0.0,90.0,81.82);
- AliMatrix(idrotm[912],90.0,188.18,0.0,0.0,90.0,98.18);
- AliMatrix(idrotm[913],90.0,204.55,0.0,0.0,90.0,114.55);
- AliMatrix(idrotm[914],90.0,220.91,0.0,0.0,90.0,130.91);
- AliMatrix(idrotm[915],90.0,237.27,0.0,0.0,90.0,147.27);
- AliMatrix(idrotm[916],90.0,253.64,0.0,0.0,90.0,163.64);
- AliMatrix(idrotm[917],90.0,295.71,0.0,0.0,90.0,205.71);
- AliMatrix(idrotm[918],90.0,321.43,0.0,0.0,90.0,231.43);
- AliMatrix(idrotm[919],90.0,347.14,0.0,0.0,90.0,257.14);
- AliMatrix(idrotm[920],90.0,12.86,0.0,0.0,90.0,282.86);
- AliMatrix(idrotm[921],90.0,38.57,0.0,0.0,90.0,308.57);
- AliMatrix(idrotm[922],90.0,64.29,0.0,0.0,90.0,334.29);
- AliMatrix(idrotm[923],90.0,115.71,0.0,0.0,90.0,25.71);
- AliMatrix(idrotm[924],90.0,141.43,0.0,0.0,90.0,51.43);
- AliMatrix(idrotm[925],90.0,167.14,0.0,0.0,90.0,77.14);
- AliMatrix(idrotm[926],90.0,192.86,0.0,0.0,90.0,102.86);
- AliMatrix(idrotm[927],90.0,218.57,0.0,0.0,90.0,128.57);
- AliMatrix(idrotm[928],90.0,244.29,0.0,0.0,90.0,154.29);
- AliMatrix(idrotm[929],90.0,120.0,90.0,210.0,0.0,0.0);
- AliMatrix(idrotm[930],90.0,240.0,90.0,330.0,0.0,0.0);
- AliMatrix(idrotm[931],90.0,60.0,90.0,150.0,180.0,0.0);
- AliMatrix(idrotm[932],90.0,120.0,90.0,210.0,180.0,0.0);
- AliMatrix(idrotm[933],90.0,180.0,90.0,270.0,180.0,0.0);
- AliMatrix(idrotm[934],90.0,240.0,90.0,330.0,180.0,0.0);
- AliMatrix(idrotm[935],90.0,300.0,90.0,30.0,180.0,0.0);
- }
-
- // SSD cone
- if (! AliITSInitGeometry::SSDconeIsTGeoNative()) {
- AliMatrix(idrotm[701],90.0,0.0,90.0,90.0,180.0,0.0);
- AliMatrix(idrotm[702],90.0,347.5,90.0,77.5,180.0,0.0);
- AliMatrix(idrotm[703],90.0,17.5,90.0,107.5,180.0,0.0);
- AliMatrix(idrotm[704],90.0,47.5,90.0,137.5,180.0,0.0);
- AliMatrix(idrotm[705],90.0,77.5,90.0,167.5,180.0,0.0);
- AliMatrix(idrotm[706],90.0,107.5,90.0,197.5,180.0,0.0);
- AliMatrix(idrotm[707],90.0,137.5,90.0,227.5,180.0,0.0);
- AliMatrix(idrotm[708],90.0,167.5,90.0,257.5,180.0,0.0);
- AliMatrix(idrotm[709],90.0,197.5,90.0,287.5,180.0,0.0);
- AliMatrix(idrotm[710],90.0,227.5,90.0,317.5,180.0,0.0);
- AliMatrix(idrotm[711],90.0,257.5,90.0,347.5,180.0,0.0);
- AliMatrix(idrotm[712],90.0,287.5,90.0,17.5,180.0,0.0);
- AliMatrix(idrotm[713],90.0,317.5,90.0,47.5,180.0,0.0);
- AliMatrix(idrotm[714],90.0,328.4,90.0,58.4,180.0,0.0);
- AliMatrix(idrotm[715],90.0,28.4,90.0,118.4,180.0,0.0);
- AliMatrix(idrotm[716],90.0,88.4,90.0,178.4,180.0,0.0);
- AliMatrix(idrotm[717],90.0,148.4,90.0,238.4,180.0,0.0);
- AliMatrix(idrotm[718],90.0,208.4,90.0,298.4,180.0,0.0);
- AliMatrix(idrotm[719],90.0,268.4,90.0,358.4,180.0,0.0);
- AliMatrix(idrotm[720],90.0,28.4,90.0,118.4,0.0,0.0);
- AliMatrix(idrotm[721],90.0,88.4,90.0,178.4,0.0,0.0);
- AliMatrix(idrotm[722],90.0,148.4,90.0,238.4,0.0,0.0);
- AliMatrix(idrotm[723],90.0,208.4,90.0,298.4,0.0,0.0);
- AliMatrix(idrotm[724],90.0,268.4,90.0,358.4,0.0,0.0);
- AliMatrix(idrotm[725],90.0,328.4,90.0,58.4,0.0,0.0);
- AliMatrix(idrotm[726],90.0,77.5,90.0,167.5,0.0,0.0);
- AliMatrix(idrotm[727],90.0,107.5,90.0,197.5,0.0,0.0);
- AliMatrix(idrotm[728],90.0,137.5,90.0,227.5,0.0,0.0);
- AliMatrix(idrotm[729],90.0,167.5,90.0,257.5,0.0,0.0);
- AliMatrix(idrotm[730],90.0,227.5,90.0,317.5,0.0,0.0);
- AliMatrix(idrotm[731],90.0,257.5,90.0,347.5,0.0,0.0);
- AliMatrix(idrotm[732],90.0,317.5,90.0,47.5,0.0,0.0);
- AliMatrix(idrotm[733],90.0,197.5,90.0,287.5,0.0,0.0);
- AliMatrix(idrotm[734],90.0,347.5,90.0,77.5,0.0,0.0);
- AliMatrix(idrotm[735],90.0,47.5,90.0,137.5,0.0,0.0);
- AliMatrix(idrotm[768],90.0,287.5,90.0,17.5,0.0,0.0);
- AliMatrix(idrotm[798],90.0,17.5,90.0,107.5,0.0,0.0);
- }
-
- // Services
- AliMatrix(idrotm[200], 90., 0., 90., 90., 180., 0.);
-
- // New reference frame: z---> -z; x ---> -x; y ---> y
- AliMatrix(idrotm[199], 90.,180., 90.,90., 180.,0.);
-
- // CONVERT INTO CM (RL(SI)=9.36 CM)
- for (i = 0; i < 6; ++i) {
- drl[i] = drl[i] / 100. * 9.36;
- } // end for i
-
- // FIELD CAGE HALF LENGTH
- rlim = 50.;
- zmax = 74.;
- ztpc = 284.;
- // --- Define ghost volume containing the whole ITS (including services)
- // and fill it with air
- dgh[0] = 0.;
- dgh[1] = 360.;
- dgh[2] = 16.;
- dgh[3] = -ztpc-5.-0.1;
- dgh[4] = 46;
- dgh[5] = 85.;
- dgh[6] = -ztpc;
- dgh[7] = 46;
- dgh[8] = 85.;
- dgh[9] = -ztpc;
- dgh[10] = 46;
- dgh[11] = rlim+7.5;
- dgh[12] = -97.5;
- dgh[13] = 46;
- dgh[14] = rlim+7.5;
- dgh[15] = -zmax;
- dgh[16] = 46;
- dgh[17] = rlim+7.5;
- dgh[18] = -48;
- dgh[19] = 6;
- dgh[20] = rlim+7.5;
- dgh[21] = -28.6;
- dgh[22] = 6;
- dgh[23] = rlim+7.5;
- dgh[24] = -27.6;
- dgh[25] = 3.295;
- dgh[26] = rlim+7.5;
- dgh[27] = 27.6;
- dgh[28] = 3.295;
- dgh[29] = rlim+7.5;
- dgh[30] = 28.6;
- dgh[31] = 6;
- dgh[32] = rlim+7.5;
- dgh[33] = 48;
- dgh[34] = 6;
- dgh[35] = rlim+7.5;
- dgh[36] = zmax;
- dgh[37] = 46;
- dgh[38] = rlim+7.5;
- dgh[39] = 97.5;
- dgh[40] = 46;
- dgh[41] = rlim+7.5;
- dgh[42] = ztpc;
- dgh[43] = 62;
- dgh[44] = 62+4.;
- dgh[45] = ztpc;
- dgh[46] = 62;
- dgh[47] = 85.;
- dgh[48] = ztpc+4.+0.1;
- dgh[49] = 62.0;//62.4;
- dgh[50] = 85.;
-// gMC->Gsvolu("ITSV", "PCON", idtmed[205], dgh, 51);
- new TGeoVolumeAssembly("ITSV");
- new TGeoVolumeAssembly("ITSS");
-
- // --- Place the ghost volume in its mother volume (ALIC) and make it
- // invisible
- // gMC->Gspos("ITSV", 1, "ALIC", 0., 0., 0., 0, "ONLY");
- //gMC->Gspos("ITSV", 1, "ALIC", 0., 0., 0., idrotm[199], "MANY");
- //gGeoManager->SetVolumeAttribute("ITSV", "SEEN", 0);
-
- //gMC->Gspos("ITSV", 1, "ALIC", 0., 0., 0., 0, "MANY"); //=== LG
- gMC->Gspos("ITSV", 1, "ALIC", 0., 0., 0., 0, "ONLY"); //=== LG
- gMC->Gspos("ITSS", 1, "ALIC", 0., 0., 0., 0, "ONLY"); //=== MS
-
-
- // --- Define ghost volume containing the six layers and fill it with air
-
-// dgh[0] = 0.;
-// dgh[1] = 360.;
-// dgh[2] = 8.;
-// dgh[3] = -zmax;
-// dgh[4] = 46.;
-// dgh[5] = rlim;
-// dgh[6] = -47.5;
-// dgh[7] = 6.005;
-// dgh[8] = rlim;
-// dgh[9] = -28.5;
-// dgh[10] = 6.005;
-// dgh[11] = rlim;
-// dgh[12] = -27.5;
-// dgh[13] = 3.3;
-// dgh[14] = rlim;
-// dgh[15] = 27.5;
-// dgh[16] = 3.3;
-// dgh[17] = rlim;
-// dgh[18] = 28.5;
-// dgh[19] = 6.005;
-// dgh[20] = rlim;
-// dgh[21] = 47.5;
-// dgh[22] = 6.005;
-// dgh[23] = rlim;
-// dgh[24] = zmax;
-// dgh[25] = 46.;
-// dgh[26] = rlim;
-// gMC->Gsvolu("ITSD", "PCON", idtmed[205], dgh, 27);
-
- // --- Place the ghost volume in its mother volume (ITSV) and make it
- // invisible
- //gMC->Gspos("ITSD", 1, "ITSV", 0., 0., 0., 0, "ONLY");
- //gGeoManager->SetVolumeAttribute("ITSD", "SEEN", 0);
-
- //======================================================================
- // Let's make ITSD an assembly, because we can then add the new geometry
- // inside this volume without belonging to it.
- //
- // The 180° rotation (which was done for switching from the old
- // coordinate system to the new one) is applied on ITSD, not ITSV,
- // because ITSV will also contain the new geometry.
- // LG
- //======================================================================
-
- //TGeoVolumeAssembly *dITS = new TGeoVolumeAssembly("ITSD");
- if (! AliITSInitGeometry::SPDshieldIsTGeoNative() ||
- ! AliITSInitGeometry::SPDIsTGeoNative() ||
- ! AliITSInitGeometry::SDDIsTGeoNative() ||
- ! AliITSInitGeometry::SSDIsTGeoNative() ||
- ! AliITSInitGeometry::SDDconeIsTGeoNative() ||
- ! AliITSInitGeometry::SSDconeIsTGeoNative() ) {
- new TGeoVolumeAssembly("ITSD");
- gMC->Gspos("ITSD", 1, "ITSV", 0., 0., 0., idrotm[199], "ONLY");
- }
-
- // --- Define SPD (option 'b') volumes ----------------------------
-
- // SPD - option 'b'
- // (this is the default)
-
- //if (option == 2) {
- if (! AliITSInitGeometry::SPDIsTGeoNative()) {
-
- dits[0] = 3.7;
- dits[1] = 7.75;
- dits[2] = 26.1;
- gMC->Gsvolu("IT12", "TUBE", idtmed[254], dits, 3);
-
- dits[0] = 3.7;
- dits[1] = 7.7;
- dits[2] = 24;
- dits[3] = 57;
- dits[4] = 100;
- gMC->Gsvolu("I12B", "TUBS", idtmed[254], dits, 5); // sector
-
- di10b[0] = 0.843;
- di10b[1] = ddet1+dchip1+dbus+0.0025;
- di10b[2] = 19.344;
- gMC->Gsvolu("I10B", "BOX ", idtmed[254], di10b, 3); // mother volume
- // on layer 1
-
- di20b[0] = 0.843;
- di20b[1] = ddet2+dchip2+dbus+0.0025;
- di20b[2] = 19.344;
- gMC->Gsvolu("I20B", "BOX ", idtmed[254], di20b, 3); // mother volume
- // layer 2
-
- dits[0] = 1.3673;
- dits[1] = 0.01;
- dits[2] = 24;
- gMC->Gsvolu("I123", "BOX ", idtmed[253], dits, 3);
-
- dits[0] = 0.06;
- dits[1] = 0.08;
- dits[2] = 24;
- dits[3] = -36.79;
- dits[4] = 21.834;
- gMC->Gsvolu("I121", "TUBS", idtmed[253], dits, 5);
-
- dits[0] = 0.1253;
- dits[1] = 0.01;
- dits[2] = 24;
- gMC->Gsvolu("I122", "BOX ", idtmed[253], dits, 3);
-
- dits[0] = 0.04;
- dits[1] = 0.06 ;
- dits[2] = 24;
- dits[3] = 126.79;
- dits[4] = 270;
- gMC->Gsvolu("I120", "TUBS", idtmed[253], dits, 5);
-
- dits[0] = 0.1134;
- dits[1] = 0.01;
- dits[2] = 24;
- gMC->Gsvolu("I144", "BOX ", idtmed[253], dits, 3);
-
- dits[0] = 0.25;
- dits[1] = 0.06;
- dits[2] = 24;
- gMC->Gsvolu("I113", "BOX ", idtmed[254], dits, 3);
-
- dits[0] = 0.077;
- dits[1] = 0.01;
- dits[2] = 24;
- gMC->Gsvolu("I143", "BOX ", idtmed[253], dits, 3);
-
- dits[0] = 0.04;
- dits[1] = 0.06;
- dits[2] = 24;
- dits[3] = 0;
- dits[4] = 90;
- gMC->Gsvolu("I142", "TUBS", idtmed[253], dits, 5);
-
- dits[0] = 0.0695;
- dits[1] = 0.01;
- dits[2] = 24;
- gMC->Gsvolu("I141", "BOX ", idtmed[253], dits, 3);
-
- dits[0] = 0.06;
- dits[1] = 0.08;
- dits[2] = 24;
- dits[3] = 0;
- dits[4] = 108;
- gMC->Gsvolu("I140", "TUBS", idtmed[253], dits, 5);
-
- dits[0] = 0.1835;
- dits[1] = 0.01;
- dits[2] = 24;
- gMC->Gsvolu("I139", "BOX ", idtmed[253], dits, 3);
-
- dits[0] = 0.1894 ;
- dits[1] = 0.01;
- dits[2] = 24;
- gMC->Gsvolu("I138", "BOX ", idtmed[253], dits, 3);
-
- dits[0] = 0.04;
- dits[1] = 0.06;
- dits[2] = 24;
- dits[3] = 0;
- dits[4] = 75.261;
- gMC->Gsvolu("I137", "TUBS", idtmed[253], dits, 5);
-
- dits[0] = 1.3401;
- dits[1] = 0.01;
- dits[2] = 24;
- gMC->Gsvolu("I136", "BOX ", idtmed[253], dits, 3);
-
- dits[0] = 0.05;
- dits[1] = 0.07;
- dits[2] = 24;
- dits[3] = 0;
- dits[4] = 72.739;
- gMC->Gsvolu("I135", "TUBS", idtmed[253], dits, 5);
-
- dits[0] = 0.1193;
- dits[1] = 0.01;
- dits[2] = 24;
- gMC->Gsvolu("I134", "BOX ", idtmed[253], dits, 3);
-
- dits[0] = 0.163;
- dits[1] = 0.01;
- dits[2] = 24;
- gMC->Gsvolu("I133", "BOX ", idtmed[253], dits, 3);
-
- dits[0] = 0.04;
- dits[1] = 0.06;
- dits[2] = 24;
- dits[3] = 0;
- dits[4] = 157.633;
- gMC->Gsvolu("I132", "TUBS", idtmed[253], dits, 5);
-
- dits[0] = 0.2497;
- dits[1] = 0.01;
- dits[2] = 24;
- gMC->Gsvolu("I131", "BOX ", idtmed[253], dits, 3);
-
- dits[0] = 0.06;
- dits[1] = 0.08;
- dits[2] = 24;
- dits[3] = 0;
- dits[4] = 148.633;
- gMC->Gsvolu("I130", "TUBS", idtmed[253], dits, 5);
-
- dits[0] = 0.292;
- dits[1] = 0.01;
- dits[2] = 24;
- gMC->Gsvolu("I129", "BOX ", idtmed[253], dits, 3);
-
- dits[0] = 0.163;
- dits[1] = 0.01;
- dits[2] = 24;
- gMC->Gsvolu("I128", "BOX ", idtmed[253], dits, 3);
-
- dits[0] = 0.04;
- dits[1] = 0.06;
- dits[2] = 24;
- dits[3] = 0;
- dits[4] = 161.297;
- gMC->Gsvolu("I126", "TUBS", idtmed[253], dits, 5);
-
- dits[0] = 0.2433;
- dits[1] = 0.01;
- dits[2] = 24;
- gMC->Gsvolu("I125", "BOX ", idtmed[253], dits, 3);
-
- dits[0] = 0.06;
- dits[1] = 0.08;
- dits[2] = 24;
- dits[3] = 0;
- dits[4] = 42.883;
- gMC->Gsvolu("I124", "TUBS", idtmed[253], dits, 5);
-
- dits[0] = 0.793;
- dits[1] = ddet1+dchip1+dbus+0.0025;
- dits[2] = 2.5;
- gMC->Gsvolu("I105", "BOX ", idtmed[290], dits, 3);
-
- di107[0] = 0.793;
- di107[1] = ddet1+dchip1;
- di107[2] = 3.536;
- gMC->Gsvolu("I107", "BOX ", idtmed[254], di107, 3); // contains det and chip
- // layer 1
- dits[0] = 0.705;
- dits[1] = 0.01;
- dits[2] = 2.5;
- gMC->Gsvolu("I109", "BOX ", idtmed[275], dits, 3);
-
- di108[0] = 0.705;
- di108[1] = dbus;
- di108[2] = 14.344;
- gMC->Gsvolu("I108", "BOX ", idtmed[275], di108, 3); // bus for both layers
-
- di1d7[0] = 0.7975;
- di1d7[1] = ddet2+dchip2;
- di1d7[2] = 3.536;
- gMC->Gsvolu("I1D7", "BOX ", idtmed[254], di1d7, 3); // contains det and chip
- // layer 2
- dits[0] = 0.06;
- dits[1] = 0.08;
- dits[2] = 24;
- dits[3] = 0;
- dits[4] = 80;
- gMC->Gsvolu("I112", "TUBS", idtmed[253], dits, 5);
-
- dits[0] = 0.04;
- dits[1] = 0.06;
- dits[2] = 24;
- dits[3] = 0;
- dits[4] = 80;
- gMC->Gsvolu("I111", "TUBS", idtmed[253], dits, 5);
-
- dits[0] = 0.15;
- dits[1] = 0.0146;
- dits[2] = 24;
- gMC->Gsvolu("I118", "BOX ", idtmed[273], dits, 3);
-
- dits[0] = 0.1315;
- dits[1] = 0.01;
- dits[2] = 24;
- gMC->Gsvolu("I110", "BOX ", idtmed[253], dits, 3);
-
- dits[0] = 0.025;
- dits[1] = 0.035;
- dits[2] = 24;
- dits[3] = 0;
- dits[4] = 180;
- gMC->Gsvolu("I114", "TUBS", idtmed[264], dits, 5);
-
- dits[0] = 0;
- dits[1] = 0.025;
- dits[2] = 24;
- dits[3] = 0;
- dits[4] = 180;
- gMC->Gsvolu("I115", "TUBS", idtmed[211], dits, 5); // set freon as cooling fluid
-
-
- dits[0] = 0.063;
- dits[1] = 0.035;
- dits[2] = 24;
- gMC->Gsvolu("I116", "BOX ", idtmed[264], dits, 3);
-
- di106[0] = 0.7975;
- di106[1] = dchip1;
- di106[2] = 0.68;
- gMC->Gsvolu("I106", "BOX ", idtmed[201], di106, 3); // chip layer 1
-
- di1d6[0] = 0.7975;
- di1d6[1] = dchip2;
- di1d6[2] = 0.68;
- gMC->Gsvolu("I1D6", "BOX ", idtmed[201], di1d6, 3); // chip layer 2
-
- di101[0] = 0.705;
- di101[1] = ddet1;
- di101[2] = 3.536;
- gMC->Gsvolu("I101", "BOX ", idtmed[250], di101, 3); // contains detector
- // layer 1
- di1d1[0] = 0.705;
- di1d1[1] = ddet2;
- di1d1[2] = 3.536;
- gMC->Gsvolu("I1D1", "BOX ", idtmed[250], di1d1, 3); // contains detector
- // layer 2
-
-
- dits[0] = 0.063;
- dits[1] = 0.025;
- dits[2] = 24;
- gMC->Gsvolu("I117", "BOX ", idtmed[211], dits, 3); // set freon as cooling fluid
-
-
- dits1[0] = 0.64;
- dits1[1] = ddet1;
- dits1[2] = 3.48;
- gMC->Gsvolu("ITS1", "BOX ", idtmed[200], dits1, 3); // detector layer 1
-
- dits2[0] = 0.64;
- dits2[1] = ddet2;
- dits2[2] = 3.48;
- gMC->Gsvolu("ITS2", "BOX ", idtmed[200], dits2, 3); // detector layer 2
-
- dits[0] = 3.701;
- dits[1] = 7.699;
- dits[2] = 4;
- dits[3] = 57.1;
- dits[4] = 99.9;
- gMC->Gsvolu("I650", "TUBS", idtmed[254], dits, 5); // was I150 in old geom.
-
- dits[0] = 3.7;
- dits[1] = 7.75;
- dits[2] = 0.05;
- gMC->Gsvolu("I651", "TUBE", idtmed[296], dits, 3); // services disk
-
- dits[0] = 0;
- dits[1] = 0.5;
- dits[2] = 1.5;
- gMC->Gsvolu("I676", "TUBE", idtmed[274], dits, 3); // was I176 in old geom.
-
- dits[0] = 0;
- dits[1] = 0.18;
- dits[2] = 0.8;
- gMC->Gsvolu("I673", "TUBE", idtmed[274], dits, 3); // was I173 in old geom.
-
- dits[0] = 0;
- dits[1] = 0.18;
- dits[2] = 3;
- gMC->Gsvolu("I671", "TUBE", idtmed[274], dits, 3); // was I171 in old geom.
-
- dits[0] = 0;
- dits[1] = 0.075;
- dits[2] = 0.8;
- gMC->Gsvolu("I669", "TUBE", idtmed[264], dits, 3); // was I169 in old geom.
-
- dits[0] = 3.5;
- dits[1] = 5.6;
- dits[2] = 0.55;
- dits[3] = 0;
- dits[4] = 38;
- gMC->Gsvolu("I667", "TUBS", idtmed[263], dits, 5); // was I167 in old geom.
-
- dits[0] = 6.6;
- dits[1] = 7.6;
- dits[2] = 0.5;
- dits[3] = 0;
- dits[4] = 9;
- gMC->Gsvolu("I666", "TUBS", idtmed[263], dits, 5); // was I166 in old geom.
-
- dits[0] = 0.26;
- dits[1] = 0.32;
- dits[2] = 0.55;
- gMC->Gsvolu("I678", "TUBE", idtmed[263], dits, 3); // was I178 in old geom.
-
- dits[0] = 0;
- dits[1] = 0.3;
- dits[2] = 1.5;
- gMC->Gsvolu("I677", "TUBE", idtmed[211], dits, 3); //set freon as cooling fluid
- // was I177 in old geom.
-
- dits[0] = 0.07;
- dits[1] = 0.125;
- dits[2] = 0.3;
- gMC->Gsvolu("I675", "TUBE", idtmed[263], dits, 3); // was I175 in old geom.
-
-
- dits[0] = 0;
- dits[1] = 0.1;
- dits[2] = 0.8;
- gMC->Gsvolu("I674", "TUBE", idtmed[211], dits, 3); //set freon as cooling fluid
- // was I174 in old geom.
-
-
-
- dits[0] = 0;
- dits[1] = 0.1;
- dits[2] = 3;
- gMC->Gsvolu("I672", "TUBE", idtmed[211], dits, 3); //set freon as cooling fluid
- // was I172 in old geom.
-
-
- dits[0] = 0;
- dits[1] = 0.0746;
- dits[2] = 0.8;
- gMC->Gsvolu("I670", "TUBE", idtmed[211], dits, 3); //set freon as cooling fluid
- // was I170 in old geom.
-
- dits[0] = 3.7;
- dits[1] = 5.4;
- dits[2] = 0.35;
- dits[3] = 2;
- dits[4] = 36;
- gMC->Gsvolu("I668", "TUBS", idtmed[211], dits, 5); //set freon as cooling fluid
- // was I168 in old geom.
-
- }
-
- // --- Define SDD volumes ------------------------------------------
-
- cos30 = cos(30.*3.14159/180.);
- sin30 = sin(30.*3.14159/180.);
-
- if (! AliITSInitGeometry::SDDIsTGeoNative()) {
-
- Double_t maxRadius = 28.5;
- dits[0] = 0;
- dits[1] = 360;
- dits[2] = 6;
- dits[3] = -34.6;
- dits[4] = 23.49;
- dits[5] = maxRadius;
- dits[6] = -27.35;
- dits[7] = 23.49;
- dits[8] = maxRadius;
- dits[9] = -27.35;
- dits[10] = 14.59;
- dits[11] = maxRadius;
- dits[12] = 27.35;
- dits[13] = 14.59;
- dits[14] = maxRadius;
- dits[15] = 27.35;
- dits[16] = 23.49;
- dits[17] = maxRadius;
- dits[18] = 34.6;
- dits[19] = 23.49;
- dits[20] = maxRadius;
- gMC->Gsvolu("IT34", "PCON", idtmed[209], dits, 21);
-
- // block of the SDD electronics and related ladder frame
- iI018dits[0] = 3.2;
- iI018dits[1] = 2;
- iI018dits[2] = 3.65;
- gMC->Gsvolu("I018", "BOX ", idtmed[209], iI018dits, 3);
-
- // block of the SDD end ladder
- iI024dits[0] = 3.2;
- iI024dits[1] = 2;
- iI024dits[2] = 2.725;
- gMC->Gsvolu("I024", "BOX ", idtmed[209], iI024dits, 3);
-
- // ladder frame of layer 3 - F.T. March,7-2001
- iI047dits[0] = iI018dits[0];
- iI047dits[1] = iI018dits[1];
- iI047dits[2] = 6*iI018dits[2] + 2*iI024dits[2];
- gMC->Gsvolu("I047", "BOX ", idtmed[209], iI047dits, 3);
-
- // ladder frame of layer 4 - F.T. March,7-2001
- iI048dits[0] = iI018dits[0];
- iI048dits[1] = iI018dits[1];
- iI048dits[2] = 8*iI018dits[2] + 2*iI024dits[2];
- gMC->Gsvolu("I048", "BOX ", idtmed[209], iI048dits, 3);
-
-
- // global SDD volume (sensitive + insensitive)
- iI302dits[0] = 3.6250;
- iI302dits[1] = 0.0150;
- iI302dits[2] = 4.3794;
- gMC->Gsvolu("I302", "BOX ", idtmed[278], iI302dits, 3);
-
- // Like for I302 - F.T. March,7-2001
- iI402dits[0] = 3.6250;
- iI402dits[1] = 0.0150;
- iI402dits[2] = 4.3794;
- gMC->Gsvolu("I402", "BOX ", idtmed[278], iI402dits, 3);
-
- // SDD ladder of layer 3 - F.T. March,7-2001
- iI004dits[0] = iI302dits[0]+0.005;
- iI004dits[1] = 2*iI302dits[1]+ySDDsep/2.;
- iI004dits[2] = TMath::Abs(zSDDlay3[0]);
- if (iI004dits[2] < TMath::Abs(zSDDlay3[5])) {
- iI004dits[2] = TMath::Abs(zSDDlay3[5]);
- }
- iI004dits[2] = iI004dits[2] + iI302dits[2];
- gMC->Gsvolu("I004", "BOX ", idtmed[209], iI004dits, 3);
-
- // SDD ladder of layer 4 - F.T. March,7-2001
- iI005dits[0] = iI402dits[0]+0.005;
- iI005dits[1] = 2*iI402dits[1]+ySDDsep/2.;
- iI005dits[2] = TMath::Abs(zSDDlay4[0]);
- if (iI005dits[2] < TMath::Abs(zSDDlay4[7])) {
- iI005dits[2] = TMath::Abs(zSDDlay4[7]);
- }
- iI005dits[2] = iI005dits[2] + iI402dits[2];
- gMC->Gsvolu("I005", "BOX ", idtmed[209], iI005dits, 3);
-
-
- // -- block of the SDD ladder foot and end ladder
-
- // ladder foot mother volume
- iI028dits[0] = 3.0000;
- iI028dits[1] = 0.4000;
- iI028dits[2] = 0.9000;
- gMC->Gsvolu("I028", "BOX ", idtmed[224], iI028dits, 3);
-
- // positioning-box #1 at SDD end-ladder - F.T. March,7-2001
- iI420dits[0] = 0.4500;
- iI420dits[1] = 0.4000;
- iI420dits[2] = 0.4500;
- gMC->Gsvolu("I420", "BOX ", idtmed[264], iI420dits, 3);
-
- // positioning-box #2 at SDD end-ladder - F.T. March,7-2001
- iI421dits[0] = 0.;
- iI421dits[1] = 0.25;
- iI421dits[2] = iI420dits[1];
- gMC->Gsvolu("I421", "TUBE", idtmed[209], iI421dits, 3);
-
- // reference ruby-sphere at SDD end-ladder - F.T. March,7-2001
- iI422dits[0] = 0.0000;
- iI422dits[1] = 0.2000;
- iI422dits[2] = 0.0000;
- iI422dits[3] = 180.00;
- iI422dits[4] = 0.0000;
- iI422dits[5] = 360.00;
- gMC->Gsvolu("I422", "SPHE", idtmed[277], iI422dits, 6);
-
- // support for ruby-sphere (I422) - F.T. March,7-2001
- iI423dits[0] = 0.0000;
- iI423dits[1] = 0.1000;
- iI423dits[2] = (iI420dits[1]-iI422dits[1])/2.;
- gMC->Gsvolu("I423", "TUBE", idtmed[264], iI423dits, 3);
-
- // passage for HV microcables - F.T. March,7-2001
- iI424dits[0] = 1.5000;
- iI424dits[1] = 0.1500;
- iI424dits[2] = iI421dits[2];
- gMC->Gsvolu("I424", "BOX ", idtmed[209], iI424dits, 3);
-
- // HV microcables segment at the end ladder - F.T. March,7-2001
- iI425dits[0] = 1.350000;
- iI425dits[1] = 0.015250;
- iI425dits[2] = iI024dits[2];
- gMC->Gsvolu("I425", "BOX ", idtmed[279], iI425dits, 3);
-
- // lower edge of SDD ladder frame at end-ladder - part 1
- dits[0] = 0.2;
- dits[1] = 0.1815;
- dits[2] = iI024dits[2];
- dits[3] = 0.015;
- gMC->Gsvolu("I025", "TRD1", idtmed[208], dits, 4);
-
- // lower edge of SDD ladder frame at end-ladder - part 2
- dits[0] = 0.183;
- dits[1] = 0.165;
- dits[2] = iI024dits[2];
- dits[3] = 0.015;
- gMC->Gsvolu("I026", "TRD1", idtmed[208], dits, 4);
-
- // new: for the 1st top rod of the structure
- // at the end-ladder - F.T. March,7-2001
- iI029dits[0] = 0.2;
- iI029dits[1] = 0.1815;
- iI029dits[2] = 1.0100;
- iI029dits[3] = 0.015;
- gMC->Gsvolu("I029", "TRD1", idtmed[208], iI029dits, 4);
-
- // new: for the 2nd top rod of the structure
- // at the end-ladder - F.T. March,7-2001
- iI030dits[0] = 0.1830;
- iI030dits[1] = 0.1650;
- iI030dits[2] = 1.0100;
- iI030dits[3] = 0.0150;
- gMC->Gsvolu("I030", "TRD1", idtmed[208], iI030dits, 4);
-
- // inox cooling tubes for the end ladder - F.T. March,7-2001
- iI031dits[0] = 0.093;
- iI031dits[1] = 0.1;
- iI031dits[2] = iI024dits[2];
- gMC->Gsvolu("I031", "TUBE", idtmed[264], iI031dits, 3);
-
- if (fluid == 1) {
- // cooling water for the end ladder - F.T. March,7-2001
- iI032dits[0] = 0;
- iI032dits[1] = iI031dits[0];
- iI032dits[2] = iI024dits[2];
- gMC->Gsvolu("I032", "TUBE", idtmed[211], iI032dits, 3);
- } else {
- // cooling freon for the end ladder - R.B. March,21-2001
- iI032dits[0] = 0;
- iI032dits[1] = iI031dits[0];
- iI032dits[2] = iI024dits[2];
- gMC->Gsvolu("I032", "TUBE", idtmed[212], iI032dits, 3);
- }
-
- // -- block of the SDD ladder frame holding the electronics
-
- // edge of the ladder frame - part 1
- dits[0] = 0.2;
- dits[1] = 0.182;
- dits[2] = 3.65;
- dits[3] = 0.015;
- gMC->Gsvolu("I019", "TRD1", idtmed[208], dits, 4);
-
- // edge of the ladder frame - part 2
- dits[0] = 0.183;
- dits[1] = 0.165;
- dits[2] = 3.65;
- dits[3] = 0.015;
- gMC->Gsvolu("I020", "TRD1", idtmed[208], dits, 4);
-
- // inclined segments of the ladder frame
- dits[0] = 2.23;
- dits[1] = 2.1;
- dits[2] = 0.05;
- dits[3] = 0.03;
- gMC->Gsvolu("I021", "TRD1", idtmed[208], dits, 4);
-
- // horiz.segments of the ladders, normal to ladder edges
- dits[0] = 2.1;
- dits[1] = 2;
- dits[2] = 0.06;
- dits[3] = 0.04;
- gMC->Gsvolu("I022", "TRD1", idtmed[208], dits, 4);
-
- // horiz.segments of the ladders, at 45 deg. to ladder edges
- dits[0] = 2.615;
- dits[1] = 2.465;
- dits[2] = 0.06;
- dits[3] = 0.04;
- gMC->Gsvolu("I023", "TRD1", idtmed[208], dits, 4);
-
- // supports of the ceramic pins holding the detectors
- dits[0] = 0.3;
- dits[1] = 0.05;
- dits[2] = 0.15;
- gMC->Gsvolu("I033", "BOX ", idtmed[208], dits, 3);
-
- // ceramic pins holding the detectors
- dits[0] = 0;
- dits[1] = 0.05;
- dits[2] = 0.225;
- gMC->Gsvolu("I034", "TUBE", idtmed[277], dits, 3);
-
- // holders of cooling tubes
- iI035dits[0] = 0.1;
- iI035dits[1] = 0.15;
- iI035dits[2] = 0.2;
- gMC->Gsvolu("I035", "TUBE", idtmed[208], iI035dits, 3);
-
- // top holders of microcables
- dits[0] = 0.2;
- dits[1] = 0.01;
- dits[2] = 0.05;
- gMC->Gsvolu("I036", "BOX ", idtmed[208], dits, 3);
-
- // inox cooling tubes - F.T. March,7-2001
- iI037dits[0] = 0.093;
- iI037dits[1] = 0.1;
- iI037dits[2] = iI018dits[2];
- gMC->Gsvolu("I037", "TUBE", idtmed[264], iI037dits, 3);
-
- if (fluid == 1) {
- // cooling water - F.T. March,7-2001
- iI038dits[0] = 0;
- iI038dits[1] = iI037dits[0];
- iI038dits[2] = iI018dits[2];
- gMC->Gsvolu("I038", "TUBE", idtmed[211], iI038dits, 3);
- } else {
- // cooling freon - R.B. March,21-2001
- iI038dits[0] = 0;
- iI038dits[1] = iI037dits[0];
- iI038dits[2] = iI018dits[2];
- gMC->Gsvolu("I038", "TUBE", idtmed[212], iI038dits, 3);
- }
- // -- block of the SDD electronics (heat bridge, chips, hybrid, anode microcable)
-
- // SDD heat bridge - F.T. March,7-2001
- iI039dits[0] = 1.1000;
- iI039dits[1] = 0.0087;
- iI039dits[2] = 3.2500;
- gMC->Gsvolu("I039", "BOX ", idtmed[268], iI039dits, 3);
-
- // SDD clip part 1
- dits[0] = 0.25;
- dits[1] = 0.01;
- dits[2] = iI039dits[2];
- gMC->Gsvolu("I040", "BOX ", idtmed[268], dits, 3);
-
- // SDD clip part 2
- iI041dits[0] = 0.1;
- iI041dits[1] = 0.12;
- iI041dits[2] = iI039dits[2];
- iI041dits[3] = 90;
- iI041dits[4] = 320;
- gMC->Gsvolu("I041", "TUBS", idtmed[268], iI041dits, 5);
-
-
- // SDD PASCAL - F.T. March,7-2001
- iI042dits[0] = 0.5000;
- iI042dits[1] = 0.0175;
- iI042dits[2] = 0.5000;
- gMC->Gsvolu("I042", "BOX ", idtmed[206], iI042dits, 3);
-
- // SDD AMBRA - F.T. March,7-2001
- iI043dits[0] = 0.3500;
- iI043dits[1] = 0.0175;
- iI043dits[2] = 0.5000;
- gMC->Gsvolu("I043", "BOX ", idtmed[206], iI043dits, 3);
-
- // SDD capacitors - F.T. March,7-2001
- iI051dits[0] = 0.1400;
- iI051dits[1] = 0.0350;
- iI051dits[2] = 0.0625;
- gMC->Gsvolu("I051", "BOX ", idtmed[276], iI051dits, 3);
-
- // SDD hybrid circuit - F.T. March,7-2001
- iI052dits[0] = 1.725000;
- iI052dits[1] = 0.003743;
- iI052dits[2] = iI039dits[2];
- gMC->Gsvolu("I052", "BOX ", idtmed[281], iI052dits, 3);
-
- // SDD anode microcable : changed - F.T. March,7-2001
- iI044dits[0] = iI018dits[2];
- iI044dits[1] = iI039dits[2];
- iI044dits[2] = 0.00084;
- iI044dits[3] = (15.189149/(iI044dits[0]+iI044dits[1]))/2;
- gMC->Gsvolu("I044", "TRD1", idtmed[282], iI044dits, 4);
- volI044 = ((2*iI044dits[0] + 2*iI044dits[1]) * 2*iI044dits[2])/2 * 2*iI044dits[3];
-
- // SDD electronics box - F.T. March,7-2001
- iI050dits[1] = iI039dits[1]+iI052dits[1]+iI051dits[1]+iI044dits[2];
- iI050dits[0] = iI018dits[1]/cos(30.*3.14159/180.)-iI050dits[1]*sin(30.*3.14159/180.);
- iI050dits[2] = iI018dits[2];
- gMC->Gsvolu("I050", "BOX ", idtmed[209], iI050dits, 3);
-
- // SDD sensitive volume
- dits[0] = 3.50850;
- dits[1] = 0.01499; // not 0.015 because it is included into I302 which is 0.015
- dits[2] = 3.76320;
- gMC->Gsvolu("ITS3", "BOX ", idtmed[200], dits, 3);
-
- // Like for ITS3 - F.T. March,7-2001
- dits[0] = 3.50850;
- dits[1] = 0.01499; // not 0.015 because it is included into I402 which is 0.015
- dits[2] = 3.76320;
- gMC->Gsvolu("ITS4", "BOX ", idtmed[200], dits, 3);
- }
-
- // --- Define SSD volumes ------------------------------------------
-
- if (! AliITSInitGeometry::SSDIsTGeoNative()) {
- dits[0] = 0;
- dits[1] = 360;
- dits[2] = 6;
- dits[3] = -57.45;
- dits[4] = 43.6;
- dits[5] = 48;
- dits[6] = -49.15;
- dits[7] = 43.6;
- dits[8] = 48;
- dits[9] = -49.15;
- dits[10] = 36.9;
- dits[11] = 48;
- dits[12] = 50.55;
- dits[13] = 36.9;
- dits[14] = 48;
- dits[15] = 50.55;
- dits[16] = 43.6;
- dits[17] = 48;
- dits[18] = 57.45;
- dits[19] = 43.6;
- dits[20] = 48;
- //gMC->Gsvolu("IT56", "PCON", idtmed[220], dits, 21); // SSD air
- gMC->Gsvolu("IT56", "PCON", idtmed[204], dits, 21); // air
-
- dits[0] = 3.4;
- dits[1] = 1.955;
- dits[2] = 56.5;
- gMC->Gsvolu("I570", "BOX ", idtmed[204], dits, 3);
-
- dits[0] = 3.75;
- dits[1] = 0.045;
- dits[2] = 50.975;
- gMC->Gsvolu("I569", "BOX ", idtmed[204], dits, 3);
-
- dits[0] = 3.4;
- dits[1] = 1.955;
- dits[2] = 47;
- gMC->Gsvolu("I571", "BOX ", idtmed[204], dits, 3);
-
- dits[0] = 3.75;
- dits[1] = 0.045;
- dits[2] = 43.3;
- gMC->Gsvolu("I565", "BOX ", idtmed[204], dits, 3);
-
- dits[0] = 3.4;
- dits[1] = 1.955;
- dits[2] = 3.15;
- gMC->Gsvolu("I553", "BOX ", idtmed[204], dits, 3);
-
- dits[0] = 3.405;
- dits[1] = 1.955;
- dits[2] = 1.955;
- gMC->Gsvolu("I523", "BOX ", idtmed[204], dits, 3);
-
- dits[0] = 3.75;
- dits[1] = 0.015;
- dits[2] = 2.1;
- gMC->Gsvolu("I566", "BOX ", idtmed[206], dits, 3);
-
- dits[0] = 3.4;
- dits[1] = 1.955;
- dits[2] = 3.15;
- gMC->Gsvolu("I544", "BOX ", idtmed[204], dits, 3);
-
- dits[0] = 3.41;
- dits[1] = 1.955;
- dits[2] = 1.955;
- gMC->Gsvolu("I516", "BOX ", idtmed[204], dits, 3);
-
- dits[0] = 3.75;
- dits[1] = 0.015;
- dits[2] = 2.1;
- gMC->Gsvolu("I562", "BOX ", idtmed[206], dits, 3);
-
- if (fluid == 1) {
- dits[0] = 0;
- dits[1] = 0.07;
- dits[2] = 3.15;
- gMC->Gsvolu("I559", "TUBE", idtmed[211], dits, 3); // set water as cooling fluid
- } else {
- dits[0] = 0;
- dits[1] = 0.07;
- dits[2] = 3.15;
- gMC->Gsvolu("I559", "TUBE", idtmed[212], dits, 3); // set freon as cooling fluid
- }
-
- dits[0] = 0.07;
- dits[1] = 0.1;
- dits[2] = 3.15;
- gMC->Gsvolu("I560", "TUBE", idtmed[210], dits, 3);
-
- dits[0] = 0.225;
- dits[1] = 0.195;
- dits[2] = 3.15;
- dits[3] = 0.025;
- gMC->Gsvolu("I558", "TRD1", idtmed[203], dits, 4);
-
- dits[0] = 0.25;
- dits[1] = 0.22;
- dits[2] = 3.15;
- dits[3] = 0.025;
- gMC->Gsvolu("I557", "TRD1", idtmed[203], dits, 4);
-
- dits[0] = 2.17;
- dits[1] = 0.035;
- dits[2] = 0.05;
- gMC->Gsvolu("I556", "BOX ", idtmed[203], dits, 3);
-
- dits[0] = 2 ;
- dits[1] = 0.035;
- dits[2] = 0.05;
- gMC->Gsvolu("I554", "BOX ", idtmed[203], dits, 3);
-
- dits[0] = 2.675;
- dits[1] = 0.035;
- dits[2] = 0.05;
- gMC->Gsvolu("I555", "BOX ", idtmed[203], dits, 3);
-
- dits[0] = 0.3;
- dits[1] = 0.15;
- dits[2] = 0.15;
- gMC->Gsvolu("I561", "BOX ", idtmed[203], dits, 3);
-
- dits[0] = 0.025;
- dits[1] = 0.025;
- dits[2] = 0.05;
- gMC->Gsvolu("I519", "BOX ", idtmed[214], dits, 3);
-
- dits[0] = 0.304;
- dits[1] = 0.0275;
- dits[2] = 0.432;
- gMC->Gsvolu("I521", "BOX ", idtmed[206], dits, 3);
-
- dits[0] = 0.16;
- dits[1] = 0.08;
- dits[2] = 0.08;
- gMC->Gsvolu("I520", "BOX ", idtmed[214], dits, 3);
-
- dits[0] = 3.4;
- dits[1] = 0.015;
- dits[2] = 0.525;
- gMC->Gsvolu("I518", "BOX ", idtmed[203], dits, 3);
-
- dits[0] = 0.15;
- dits[1] = 0.105;
- dits[2] = 0.29;
- dits[3] = 0.08;
- gMC->Gsvolu("I522", "TRD1", idtmed[203], dits, 4);
-
- dits[0] = 0.07;
- dits[1] = 0.1;
- dits[2] = 1.955;
- gMC->Gsvolu("I542", "TUBE", idtmed[210], dits, 3);
-
- if (fluid == 1) {
- dits[0] = 0;
- dits[1] = 0.07;
- dits[2] = 1.955;
- gMC->Gsvolu("I541", "TUBE", idtmed[211], dits, 3); // set water as cooling fluid
- } else {
- dits[0] = 0;
- dits[1] = 0.07;
- dits[2] = 1.955;
- gMC->Gsvolu("I541", "TUBE", idtmed[212], dits, 3); // set freon as cooling fluid
- }
-
- dits[0] = 0.3;
- dits[1] = 0.15;
- dits[2] = 0.15;
- gMC->Gsvolu("I543", "BOX ", idtmed[203], dits, 3);
-
- dits[0] = 0.25;
- dits[1] = 0.22;
- dits[2] = 1.955;
- dits[3] = 0.025;
- gMC->Gsvolu("I537", "TRD1", idtmed[203], dits, 4);
-
- dits[0] = 0.225;
- dits[1] = 0.195;
- dits[2] = 1.955;
- dits[4] = 0.025;
- gMC->Gsvolu("I538", "TRD1", idtmed[203], dits, 4);
-
- dits[0] = 2.17;
- dits[1] = 0.035;
- dits[2] = 0.05;
- gMC->Gsvolu("I536", "BOX ", idtmed[203], dits, 3);
-
- dits[0] = 2.675;
- dits[1] = 0.035;
- dits[2] = 0.05;
- gMC->Gsvolu("I535", "BOX ", idtmed[203], dits, 3);
-
- dits[0] = 2;
- dits[1] = 0.035;
- dits[2] = 0.05;
- gMC->Gsvolu("I534", "BOX ", idtmed[203], dits, 3);
-
- dits[0] = 0;
- dits[1] = 0.05;
- dits[2] = 0.17;
- gMC->Gsvolu("I540", "TUBE", idtmed[203], dits, 3);
-
- dits[0] = 0;
- dits[1] = 0.05;
- dits[2] = 0.205;
- gMC->Gsvolu("I539", "TUBE", idtmed[203], dits, 3);
-
- dits[0] = 3.65;
- dits[1] = 0.015;
- dits[2] = 2;
- gMC->Gsvolu("ITS6", "BOX ", idtmed[200], dits, 3);
-
- if (fluid == 1) {
- dits[0] = 0;
- dits[1] = 0.07;
- dits[2] = 3.15;
- gMC->Gsvolu("I550", "TUBE", idtmed[211], dits, 3); // set water as cooling fluid
- } else {
- dits[0] = 0;
- dits[1] = 0.07;
- dits[2] = 3.15;
- gMC->Gsvolu("I550", "TUBE", idtmed[212], dits, 3); // set freon as cooling fluid
- }
-
- dits[0] = 0.07;
- dits[1] = 0.1;
- dits[2] = 3.15;
- gMC->Gsvolu("I551", "TUBE", idtmed[210], dits, 3);
-
- dits[0] = 0.225;
- dits[1] = 0.195;
- dits[2] = 3.15;
- dits[3] = 0.025;
- gMC->Gsvolu("I549", "TRD1", idtmed[203], dits, 4);
-
- dits[0] = 0.25;
- dits[1] = 0.22;
- dits[2] = 3.15;
- dits[3] = 0.025;
- gMC->Gsvolu("I548", "TRD1", idtmed[203], dits, 4);
-
- dits[0] = 2.17;
- dits[1] = 0.035;
- dits[2] = 0.05;
- gMC->Gsvolu("I547", "BOX ", idtmed[203], dits, 3);
-
- dits[0] = 2;
- dits[1] = 0.035;
- dits[2] = 0.05;
- gMC->Gsvolu("I545", "BOX ", idtmed[203], dits, 3);
-
- dits[0] = 2.675;
- dits[1] = 0.035;
- dits[2] = 0.05;
- gMC->Gsvolu("I546", "BOX ", idtmed[203], dits, 3);
-
- dits[0] = 0.3;
- dits[1] = 0.15;
- dits[2] = 0.15;
- gMC->Gsvolu("I552", "BOX ", idtmed[203], dits, 3);
-
- dits[0] = 0.304;
- dits[1] = 0.0275;
- dits[2] = 0.4322;
- gMC->Gsvolu("I515", "BOX ", idtmed[206], dits, 3);
-
- dits[0] = 0.025;
- dits[1] = 0.025;
- dits[2] = 0.05;
- gMC->Gsvolu("I513", "BOX ", idtmed[214], dits, 3);
-
- dits[0] = 0.16;
- dits[1] = 0.08;
- dits[2] = 0.08;
- gMC->Gsvolu("I514", "BOX ", idtmed[214], dits, 3);
-
- dits[0] = 3.4;
- dits[1] = 0.015;
- dits[2] = 0.525;
- gMC->Gsvolu("I512", "BOX ", idtmed[203], dits, 3);
-
- dits[0] = 0.225;
- dits[1] = 0.195;
- dits[2] = 1.955;
- dits[3] = 0.025;
- gMC->Gsvolu("I528", "TRD1", idtmed[203], dits, 4);
-
- dits[0] = 0.25;
- dits[1] = 0.22;
- dits[2] = 1.955;
- dits[3] = 0.025;
- gMC->Gsvolu("I527", "TRD1", idtmed[203], dits, 4);
-
- dits[0] = 2.17;
- dits[1] = 0.035;
- dits[2] = 0.05;
- gMC->Gsvolu("I526", "BOX ", idtmed[203], dits, 3);
-
- dits[0] = 2.675;
- dits[1] = 0.035;
- dits[2] = 0.05;
- gMC->Gsvolu("I525", "BOX ", idtmed[203], dits, 3);
-
- dits[0] = 2;
- dits[1] = 0.035;
- dits[2] = 0.05;
- gMC->Gsvolu("I524", "BOX ", idtmed[203], dits, 3);
-
- dits[0] = 0;
- dits[1] = 0.05;
- dits[2] = 0.205;
- gMC->Gsvolu("I529", "TUBE", idtmed[203], dits, 3);
-
- dits[0] = 0;
- dits[1] = 0.05;
- dits[2] = 0.17;
- gMC->Gsvolu("I530", "TUBE", idtmed[203], dits, 3);
-
- dits[0] = 0.15;
- dits[1] = 0.105;
- dits[2] = 0.29;
- dits[3] = 0.08;
- gMC->Gsvolu("I517", "TRD1", idtmed[203], dits, 4);
-
- if (fluid == 1) {
- dits[0] = 0;
- dits[1] = 0.07;
- dits[2] = 1.955;
- gMC->Gsvolu("I531", "TUBE", idtmed[211], dits, 3); // set water as cooling fluid
- } else {
- dits[0] = 0;
- dits[1] = 0.07;
- dits[2] = 1.955;
- gMC->Gsvolu("I531", "TUBE", idtmed[212], dits, 3); // set freon as cooling fluid
- }
-
- dits[0] = 0.07;
- dits[1] = 0.1;
- dits[2] = 1.955;
- gMC->Gsvolu("I532", "TUBE", idtmed[210], dits, 3);
-
- dits[0] = 0.3;
- dits[1] = 0.15;
- dits[2] = 0.15;
- gMC->Gsvolu("I533", "BOX ", idtmed[203], dits, 3);
-
- dits[0] = 3.65;
- dits[1] = 0.015;
- dits[2] = 2;
- gMC->Gsvolu("ITS5", "BOX ", idtmed[200], dits, 3);
- }
-
-
- // --- Define volumes of shield of SPD ----------------
-
- if (! AliITSInitGeometry::SPDshieldIsTGeoNative()) {
- dits[0] = 8.37;
- dits[1] = 9.93;
- dits[2] = 25;
- gMC->Gsvolu("IC01", "TUBE", idtmed[289], dits, 3);
-
- dits[0] = 8.3;
- dits[1] = 9.995;
- dits[2] = 17.5/2.;
- gMC->Gsvolu("IC02", "TUBE", idtmed[289], dits, 3);
- }
-
- Double_t s1,s2,b1,b2;
-
- if (! AliITSInitGeometry::SDDconeIsTGeoNative()) {
-
- // --- Define volume of first cylinder between SPD and SDD --------------
- dits[0] = (21.-0.128)/2.;
- dits[1] = 21./2.;
- dits[2] = 39.4;
- gMC->Gsvolu("ICY1", "TUBE", idtmed[208], dits, 3);
-
- // --- Define volumes of second cylinder between SDD and SSD ------------
- // --- (from B. Giraudo plots - M.S. 20 Nov 2007)
- dits[0] = 59.5/2. - 0.06;
- dits[1] = 59.5/2.;
- dits[2] = 102/2.; // was 57
- gMC->Gsvolu("ICY2", "TUBE", idtmed[208], dits, 3);
-
- dits[1] = dits[0];
- dits[0] = dits[1] - 0.5;
- gMC->Gsvolu("ICY3", "TUBE", idtmed[267], dits, 3);
-
- dits[1] = dits[0];
- dits[0] = dits[1] - 0.06;
- gMC->Gsvolu("ICY4", "TUBE", idtmed[208], dits, 3);
-
- // --- Define volumes of SDD cone ----------------------------------
-
- dits[0] = 0;
- dits[1] = 360;
- dits[2] = 12;
- //
- dits[3] = -59.7;
- dits[4] = 27;
- dits[5] = 28.6;
-
- dits[6] = -42.7;
- dits[7] = 10;
- dits[8] = 28.6;
-
- // dits[9] = -34.65;
- dits[9] = -33.55;
- dits[10] = 10;
- dits[11] = 28.6;
-
- // dits[12] = -34.65;
- dits[12] = -33.55;
- dits[13] = 10;
- dits[14] = 23.495;
-
- //dits[15] = -23.7;
- dits[15] = -26.2;
- dits[16] = 10;
- dits[17] = 23.495;
-
- //dits[18] = -23.7;
- dits[18] = -26.2;
- dits[19] = 10;
- dits[20] = 14.595;
-
- //dits[21] = 23.7;
- dits[21] = 26.2;
- dits[22] = 10;
- dits[23] = 14.595;
-
- //dits[24] = 23.7;
- dits[24] = 26.2;
- dits[25] = 10;
- dits[26] = 23.495;
-
-// dits[27] = 34.65;
- dits[27] = 33.55;
- dits[28] = 10;
- dits[29] = 23.495;
-
-// dits[30] = 34.65;
- dits[30] = 33.55;
- dits[31] = 10;
- dits[32] = 28.6;
-
- dits[33] = 42.7;
- dits[34] = 10;
- dits[35] = 28.6;
-
- dits[36] = 59.7;
- dits[37] = 27.2637;
- dits[38] = 28.6;
-
- if (! AliITSInitGeometry::SDDIsTGeoNative()) {
- dits[9] = -34.65;
- dits[12] = -34.65;
- dits[15] = -23.7;
- dits[18] = -23.7;
- dits[21] = 23.7;
- dits[24] = 23.7;
- dits[27] = 34.65;
- dits[30] = 34.65;
- }
- gMC->Gsvolu("IS02", "PCON", idtmed[204], dits, 39);
-
- dits[0] = 0;
- dits[1] = 360;
- dits[2] = 6;
- dits[3] = 38.65;
- dits[4] = 10.75;
- dits[5] = 12.25;
- dits[6] = 40.15;
- dits[7] = 10.75;
- dits[8] = 13.96;
- dits[9] = 40.15;
- dits[10] = 12.46;
- dits[11] = 13.96;
- dits[12] = 55.75;
- dits[13] = 27;
- dits[14] = 28.5;
- dits[15] = 55.75;
- dits[16] = 27;
- dits[17] = 28.5;
- dits[18] = 57.25;
- dits[19] = 27;
- dits[20] = 28.5;
-// gMC->Gsvolu("I093", "PCON", idtmed[272], dits, 21); // SDD cone
- gMC->Gsvolu("I093", "PCON", idtmed[287], dits, 21); // SDD cone
-
- // Redefined to make adding material for cables easier (FMD geometry)
- s1 = (dits[13]-dits[10])/(dits[12]-dits[9]); // Slope of conical section
- s2 = (dits[14]-dits[11])/(dits[12]-dits[9]); // Slope of conical section
- b1 = dits[13] - s1*dits[12]; // inside cone axis intersept
- b2 = dits[14] - s2*dits[12]; // outside cone axis intersept
- dits[0] = 0; //dits[0] = 0;
- dits[1] = 50; //dits[1] = 50;
- dits[2] = 4; //dits[2] = 3;
-
- dits[4] = 14.0; //dits[4] = 14; // r inner
- dits[5] = dits[4]; //dits[5] = 18.75; // r outer
- dits[3] = (dits[4]-b2)/s2; //dits[3] = 39; // Z
-
- dits[7] = dits[4]; //dits[7] = 14; // r inner
- dits[6] = (dits[7]-b1)/s1; //dits[6] = 46.7-3; // Z
- dits[8] = s2*dits[6]+b2; //dits[8] = 18.75; // r outer
-
- dits[11] = 18.75; //dits[11] = 18.75; // r outer
- dits[9] = (dits[11]-b2)/s2; //dits[9] = 51.45-3; // Z
- dits[10] = s1*dits[9]+b1; //dits[10] = 18.75; // r inner
-
- dits[13] = dits[11]; // r inner
- dits[14] = dits[11]; // r outer
- dits[12] = (dits[13]-b1)/s1; // Z
-// gMC->Gsvolu("I099", "PCON", idtmed[204], dits, 12); // SDD 3 cone hole
- gMC->Gsvolu("I099", "PCON", idtmed[285], dits, 15); // SDD 3 cone hole
-
- dits[0] = 0; //dits[0] = 0;
- dits[1] = 25; //dits[1] = 25;
- dits[2] = 4; //dits[2] = 3;
-
- dits[4] = 23.4; //dits[4] = 23.4; // r inner
- dits[5] = dits[4]; //dits[5] = 26.4; // r outer
- dits[3] = (dits[4]-b2)/s2; //dits[3] = 49; // Z
-
- dits[7] = dits[4]; //dits[7] = 23.4; // r inner
- dits[6] = (dits[7]-b1)/s1; //dits[6] = 56.1-3; // Z
- dits[8] = s2*dits[6]+b2; //dits[8] = 26.4; // r outer
-
- dits[11] = 26.4; //dits[11] = 26.4; // r outer
- dits[9] = (dits[11]-b2)/s2; //dits[9] = 59.1-3; // Z
- dits[10] = s1*dits[9]+b1; //dits[10] = 26.4; // r inner
-
- dits[13] = dits[11]; // r inner
- dits[14] = dits[11]; // r outer
- dits[12] = (dits[13]-b1)/s1; // Z
-// gMC->Gsvolu("I200", "PCON", idtmed[204], dits, 12); // SDD 4 cone hole
- gMC->Gsvolu("I200", "PCON", idtmed[285], dits, 15); // SDD 4 cone hole
- //Begin_Html
- /*
- <img src="http://www.Physics.ohio-state.edu/~nilsen/ITS/ITS_FMD_PMD_Geom.eps">
- </pre>
- <br clear=left>
- <font size=+2 color=blue>
- <p>SDD Support cone with other forward detectors. Shown in
- brown are a posible cabling layout.
- </font>
- */
- //End_Html
- dits[0] = 10.0;
- dits[1] = 10.5;
- dits[2] = 0.25;
- gMC->Gsvolu("I090", "TUBE", idtmed[224], dits, 3); // SDD cylinder flange
-
- dits[0] = 21.95;
- dits[1] = 22.95;
- dits[2] = 1;
- gMC->Gsvolu("I098", "TUBE", idtmed[283], dits, 3); // ladder support on layer 4
-
- dits[0] = 13.1;
- dits[1] = 14.1;
- dits[2] = 1;
- gMC->Gsvolu("I097", "TUBE", idtmed[283], dits, 3); // ladder support on layer 3
-
- dits[0] = 1;
- dits[1] = 1;
- dits[2] = 7.74;
- gMC->Gsvolu("I202", "BOX ", idtmed[272], dits, 3);
-
- if (AliITSInitGeometry::SDDIsTGeoNative())
- dits[0] = 0.9;
- else
- dits[0] = 1;
- dits[1] = 1;
- dits[2] = 9.14;
- gMC->Gsvolu("I203", "BOX ", idtmed[272], dits, 3);
-
- dits[0] = 21.95;
- dits[1] = 22.95;
- dits[2] = 1;
- gMC->Gsvolu("I095", "TUBE", idtmed[224], dits, 3);
-
- dits[0] = 3;
- dits[1] = 2.7;
- dits[2] = 1;
- dits[3] = 0.63;
- gMC->Gsvolu("I096", "TRD1", idtmed[264], dits, 4);
-
- dits[0] = 13.1;
- dits[1] = 14.1;
- dits[2] = 1;
- gMC->Gsvolu("I094", "TUBE", idtmed[224], dits, 3);
- }
-
- if (! AliITSInitGeometry::SSDconeIsTGeoNative()) {
- // --- Define volumes of SSD cone ----------------------------------
-
- dits[0] = 0;
- dits[1] = 360;
- dits[2] = 12;
-
- dits[3] = -zmax;
- dits[4] = 46;
- dits[5] = 49.25;
-
- dits[6] = -61.2;
- dits[7] = 28.7;
- dits[8] = 49.25;
-
- dits[9] = -57.5;
- dits[10] = 28.7;
- dits[11] = 49.25;
-
- dits[12] = -57.5;
- dits[13] = 28.7;
- dits[14] = 43.5;
-
- //dits[15] = -49.2;
- dits[15] = -53.4-0.75;
- dits[16] = 28.7;
- dits[17] = 43.5;
-
- //dits[18] = -49.2;
- dits[18] = -53.4-0.75;
- dits[19] = 28.7;
- dits[20] = 36.85;
-
- //dits[21] = 50.6;
- dits[21] = 53.4+0.75;
- dits[22] = 28.7;
- dits[23] = 36.85;
-
- dits[24] = 53.4+0.75;
- //dits[24] = 50.6;
- dits[25] = 28.7;
- dits[26] = 43.5;
-
- dits[27] = 57.5;
- dits[28] = 28.7;
- dits[29] = 43.5;
-
- dits[30] = 57.5;
- dits[31] = 28.7;
- dits[32] = 49.25;
-
- dits[33] = 61.2;
- dits[34] = 28.7;
- dits[35] = 49.25;
- dits[36] = zmax;
- dits[37] = 46;
- dits[38] = 49.25;
-
- if (! AliITSInitGeometry::SSDIsTGeoNative()) {
- dits[15] = -49.2;
- dits[18] = -49.2;
- dits[21] = 50.6;
- dits[24] = 50.6;
- }
-
- gMC->Gsvolu("IS01", "PCON", idtmed[204], dits, 39); // SSD cone mother volume
-
- dits[0] = 0;
- dits[1] = 360;
- dits[2] = 6;
- dits[3] = -zmax;
- dits[4] = 47.75;
- dits[5] = 49.25;
- dits[6] = -zmax+2.;
- dits[7] = 47.75;
- dits[8] = 49.25;
- dits[9] = -71.2819;
- dits[10] = 46.75;
- dits[11] = 49.0319;
- dits[12] = -57.25; // was 58.5
- dits[13] = 32.9681;
- dits[14] = 34.75;
- dits[15] = -57.25; // was 58.5
- dits[16] = 30;
- dits[17] = 34.75;
- dits[18] = -55.75; // was 57
- dits[19] = 30;
- dits[20] = 32.25; // was 31.5
-// gMC->Gsvolu("I212", "PCON", idtmed[272], dits, 21); // SSD cone
- gMC->Gsvolu("I212", "PCON", idtmed[288], dits, 21); // SSD cone
-
- s1 = (dits[10]-dits[13])/(dits[9]-dits[12]); // Slope of conical section
- s2 = (dits[11]-dits[14])/(dits[9]-dits[12]); // Slope of conical section
- b1 = dits[13] - s1*dits[12]; // inside cone axis intersept
- b2 = dits[14] - s2*dits[12]; // outside cone axis intersept
- dits[0] = 0;
- dits[1] = 25;
- dits[2] = 4; //dits[2] = 5;
-
- dits[4] = 45.50; //dits[4] = 45.5; // r inner
- dits[5] = dits[4]; //dits[5] = 45.5; // r outer
- dits[3] = (dits[4] - b1)/s1; //dits[3] = -zmax+3; // z
-
- dits[8] = dits[4]; //dits[8] = 45.5; // r outer
- dits[6] = (dits[8] - b2)/s2; //dits[6] = -69.7+3;; // z
- dits[7] = s1*dits[6] + b1; //dits[7] = 37; // r inner
-
- dits[10] = 37.00; //dits[10] = 37; // r inner
- dits[9] = (dits[10]-b1)/s1; //dits[9] = -68.5+3;; // z
- dits[11] = s2*dits[9]+b2; //dits[11] = 45.5; // r outer
-
- dits[13] = dits[10]; //dits[13] = 37; // r inner
- dits[14] = dits[13]; //dits[14] = 45.5; // r outer
- dits[12] = (dits[14] - b2)/s2; //dits[12] = -68.5+4.8;; // z
-// gMC->Gsvolu("I215", "PCON", idtmed[204], dits, 18); // SSD cone hole
- gMC->Gsvolu("I215", "PCON", idtmed[286], dits, 15); // SSD cone hole
- //Begin_Html
- /*
- <img src="http://www.Physics.ohio-state.edu/~nilsen/ITS/ITS_FMD_PMD_Geom.eps">
- </pre>
- <br clear=left>
- <font size=+2 color=blue>
- <p>SSD Support cone with other forward detectors. Shown in
- brown are a posible cabling layout.
- </font>
- */
- //End_Html
-
- dits[0] = 28.75;
- dits[1] = 29.75;
- dits[2] = 0.5;
- gMC->Gsvolu("I211", "TUBE", idtmed[224], dits, 3); // SSD cylinder flange
-
- dits[0] = 35.8;
- dits[1] = 36.8;
- dits[2] = 1;
- gMC->Gsvolu("I217", "TUBE", idtmed[283], dits, 3); // ladder support on layer 5
-
- dits[0] = 41.4;
- dits[1] = 42.4;
- dits[2] = 1;
- gMC->Gsvolu("I219", "TUBE", idtmed[283], dits, 3); // ladder support on layer 6
-
- dits[0] = 42.05+5.;
- dits[1] = 42.55+5.;
- dits[2] = 1.25;
- gMC->Gsvolu("I214", "TUBE", idtmed[224], dits, 3); // layer 6 electronic support
- // this will change after PPR
- dits[0] = 37.05+5.;
- dits[1] = 37.55+5.;
- dits[2] = 1.25;
- gMC->Gsvolu("I213", "TUBE", idtmed[224], dits, 3); // layer 5 electronic support
- // this will change after PPR
-
- dits[0] = 0;
- dits[1] = 3.2;
- dits[2] = 9;
- dits[3] = -14;
- dits[4] = 30.5;
- dits[5] = 33.5;
- dits[6] = -9.85;
- dits[7] = 30.5;
- dits[8] = 33.5;
- dits[9] = -9.85;
- dits[10] = 30.5;
- dits[11] = 43.45;
- dits[12] = -7.85;
- dits[13] = 30.5;
- dits[14] = 43.45;
- dits[15] = -7.85;
- dits[16] = 30.5;
- dits[17] = 36.5;
- dits[18] = -7;
- dits[19] = 30.5;
- dits[20] = 36.5;
- dits[21] = -4;
- dits[22] = 33.0173;
- dits[23] = 36.5;
- dits[24] = -4;
- dits[25] = 33.0173;
- dits[26] = 36.80;
- dits[27] = -2;
- dits[28] = 34.6955;
- dits[29] = 36.80;
- gMC->Gsvolu("I216", "PCON", idtmed[272], dits, 30); // supports (1-6) of the ladders
- }
-
-
- // --- Place SPD (option 'b') volumes into their mother volume IT12
-
- // SPD - option 'b'
- // (this is the default)
-
- //if (option == 2) {
- if (! AliITSInitGeometry::SPDIsTGeoNative()) {
-
- gMC->Gspos("I12B",1,"IT12",0.0,0.0,0.0,0,"ONLY");
- gMC->Gspos("I12B",8,"IT12",0.0,0.0,0.0,idrotm[233],"ONLY");
- gMC->Gspos("I12B",7,"IT12",0.0,0.0,0.0,idrotm[244],"ONLY");
- gMC->Gspos("I12B",6,"IT12",0.0,0.0,0.0,idrotm[236],"ONLY");
- gMC->Gspos("I12B",2,"IT12",0.0,0.0,0.0,idrotm[245],"ONLY");
- gMC->Gspos("I12B",3,"IT12",0.0,0.0,0.0,idrotm[234],"ONLY");
- gMC->Gspos("I12B",4,"IT12",0.0,0.0,0.0,idrotm[246],"ONLY");
- gMC->Gspos("I12B",5,"IT12",0.0,0.0,0.0,idrotm[247],"ONLY");
- gMC->Gspos("I12B",9,"IT12",0.0,0.0,0.0,idrotm[248],"ONLY");
- gMC->Gspos("I12B",10,"IT12",0.0,0.0,0.0,idrotm[249],"ONLY");
- deltax=((ddet1-0.01/2.)+(dchip1-0.015/2.))*TMath::Cos(270.*TMath::Pi()/180.); // see definition of idrotm[238]
- deltay=((ddet1-0.01/2.)+(dchip1-0.015/2.))*TMath::Sin(270.*TMath::Pi()/180.); // see definition of idrotm[238]
- gMC->Gspos("I10B",2,"I12B",0.203+deltax,3.8206+deltay,0.0,idrotm[238],"ONLY");
- deltax=((ddet1-0.01/2.)+(dchip1-0.015/2.))*TMath::Cos(252.*TMath::Pi()/180.); // see definition of idrotm[239]
- deltay=((ddet1-0.01/2.)+(dchip1-0.015/2.))*TMath::Sin(252.*TMath::Pi()/180.); // see definition of idrotm[239]
- gMC->Gspos("I10B",1,"I12B",1.4531+deltax,3.8152+deltay,0.0,idrotm[239],"ONLY");
- deltax=((ddet2-0.01/2.)+(dchip2-0.015/2.))*TMath::Cos(40.*TMath::Pi()/180.); // see definition of idrotm[240]
- deltay=((ddet2-0.01/2.)+(dchip2-0.015/2.))*TMath::Sin(40.*TMath::Pi()/180.); // see definition of idrotm[240]
- gMC->Gspos("I20B",1,"I12B",3.0174+deltax,6.5143+deltay,0.0,idrotm[240],"ONLY");
- deltax=((ddet2-0.01/2.)+(dchip2-0.015/2.))*TMath::Cos(49.*TMath::Pi()/180.); // see definition of idrotm[241]
- deltay=((ddet2-0.01/2.)+(dchip2-0.015/2.))*TMath::Sin(49.*TMath::Pi()/180.); // see definition of idrotm[241]
- gMC->Gspos("I20B",2,"I12B",1.9612+deltax,6.9062+deltay,0.0,idrotm[241],"ONLY");
- deltax=((ddet2-0.01/2.)+(dchip2-0.015/2.))*TMath::Cos(58.*TMath::Pi()/180.); // see definition of idrotm[242]
- deltay=((ddet2-0.01/2.)+(dchip2-0.015/2.))*TMath::Sin(58.*TMath::Pi()/180.); // see definition of idrotm[242]
- gMC->Gspos("I20B",3,"I12B",0.8567+deltax,7.1279+deltay,0.0,idrotm[242],"ONLY");
- deltax=((ddet2-0.01/2.)+(dchip2-0.015/2.))*TMath::Cos(67.*TMath::Pi()/180.); // see definition of idrotm[243]
- deltay=((ddet2-0.01/2.)+(dchip2-0.015/2.))*TMath::Sin(67.*TMath::Pi()/180.); // see definition of idrotm[243]
- gMC->Gspos("I20B",4,"I12B",-0.2689+deltax,7.1742+deltay,0.0,idrotm[243],"ONLY");
- gMC->Gspos("I123",1,"I12B",-0.2978,5.5196,0.0,idrotm[214],"ONLY");
- gMC->Gspos("I121",1,"I12B",-0.2385,4.1518,0.0,idrotm[213],"ONLY");
- gMC->Gspos("I122",1,"I12B",-0.2968,4.0207,0.0,idrotm[212],"ONLY");
- gMC->Gspos("I120",1,"I12B",-0.3672,3.9056,0.0,0,"ONLY");
- gMC->Gspos("I144",1,"I12B",-0.2538,3.8556,0.0,0,"ONLY");
- gMC->Gspos("I113",3,"I12B",0.1095,3.9056,0.0,0,"ONLY");
- gMC->Gspos("I143",1,"I12B",0.4365,3.8556,0.0,idrotm[236],"ONLY");
- gMC->Gspos("I142",1,"I12B",0.5136,3.9056,0.0,idrotm[235],"ONLY");
- gMC->Gspos("I141",1,"I12B",0.5636,3.9752,0.0,idrotm[237],"ONLY");
- gMC->Gspos("I140",1,"I12B",0.6336,4.0447,0.0,idrotm[234],"ONLY");
- gMC->Gspos("I139",1,"I12B",0.8297,4.0545,0.0,idrotm[207],"ONLY");
- gMC->Gspos("I113",5,"I12B",1.2575,3.9681,0.0,idrotm[207],"ONLY");
- gMC->Gspos("I138",1,"I12B",1.66,3.7848,0.0,idrotm[207],"ONLY");
- gMC->Gspos("I137",1,"I12B",1.8556,3.7738,0.0,idrotm[233],"ONLY");
- gMC->Gspos("I136",1,"I12B",2.6224,4.874,0.0,idrotm[232],"ONLY");
- gMC->Gspos("I135",1,"I12B",3.2967,6.0337,0.0,idrotm[231],"ONLY");
- gMC->Gspos("I134",1,"I12B",3.266,6.1636,0.0,idrotm[230],"ONLY");
- gMC->Gspos("I113",1,"I12B",2.9903,6.4144,0.0,idrotm[211],"ONLY");
- gMC->Gspos("I133",3,"I12B",2.7631,6.7627,0.0,idrotm[230],"ONLY");
- gMC->Gspos("I132",3,"I12B",2.62,6.8555,0.0,idrotm[229],"ONLY");
- gMC->Gspos("I131",3,"I12B",2.648,6.6023,0.0,idrotm[228],"ONLY");
- gMC->Gspos("I130",3,"I12B",2.6569,6.3431,0.0,idrotm[227],"ONLY");
- gMC->Gspos("I129",3,"I12B",2.3906,6.4819,0.0,idrotm[226],"ONLY");
- gMC->Gspos("I113",2,"I12B",1.9488,6.7998,0.0,idrotm[210],"ONLY");
- gMC->Gspos("I133",2,"I12B",1.6699,7.1085,0.0,idrotm[226],"ONLY");
- gMC->Gspos("I132",2,"I12B",1.5142,7.1777,0.0,idrotm[225],"ONLY");
- gMC->Gspos("I131",2,"I12B",1.5814,6.932,0.0,idrotm[224],"ONLY");
- gMC->Gspos("I130",2,"I12B",1.6308,6.6774,0.0,idrotm[223],"ONLY");
- gMC->Gspos("I129",2,"I12B",1.346,6.7728,0.0,idrotm[222],"ONLY");
- gMC->Gspos("I113",6,"I12B",0.8599,7.0176,0.0,idrotm[209],"ONLY");
- gMC->Gspos("I133",1,"I12B",0.5362,7.2789,0.0,idrotm[222],"ONLY");
- gMC->Gspos("I132",1,"I12B",0.3715,7.3228,0.0,idrotm[221],"ONLY");
- gMC->Gspos("I131",1,"I12B",0.4763,7.0907,0.0,idrotm[220],"ONLY");
- gMC->Gspos("I130",1,"I12B",0.5649,6.8469,0.0,idrotm[219],"ONLY");
- gMC->Gspos("I129",1,"I12B",0.2688,6.8966,0.0,idrotm[218],"ONLY");
- gMC->Gspos("I113",4,"I12B",-0.2497,7.0624,0.0,idrotm[208],"ONLY");
- gMC->Gspos("I128",1,"I12B",-0.6103,7.2698,0.0,idrotm[218],"ONLY");
- gMC->Gspos("I126",1,"I12B",-0.7799,7.2874,0.0,idrotm[217],"ONLY");
- gMC->Gspos("I125",1,"I12B",-0.6315,7.0883,0.0,idrotm[216],"ONLY");
- gMC->Gspos("I124",1,"I12B",-0.4965,6.8742,0.0,idrotm[215],"ONLY");
- gMC->Gspos("I105",3,"I10B",-0.05,-0.01,-16.844,idrotm[201],"ONLY");
- gMC->Gspos("I105",4,"I10B",-0.05,-0.01,16.844,0,"ONLY");
-
- // Insertion of half-stave level in old SPD1
- gGeoManager->MakeVolumeAssembly("L1H-STAVE0");
- gGeoManager->MakeVolumeAssembly("L1H-STAVE1");
- gMC->Gspos("L1H-STAVE0",1,"I10B",0,0,0,0,"ONLY");
- gMC->Gspos("L1H-STAVE1",1,"I10B",0,0,0,0,"ONLY");
- gMC->Gspos("I107",1,"L1H-STAVE0",-0.0455,-di10b[1]+di107[1],10.708,0,"ONLY");
- gMC->Gspos("I107",2,"L1H-STAVE0",-0.0455,-di10b[1]+di107[1],3.536,0,"ONLY");
- gMC->Gspos("I107",3,"L1H-STAVE1",-0.0455,-di10b[1]+di107[1],-3.536,0,"ONLY");
- gMC->Gspos("I107",4,"L1H-STAVE1",-0.0455,-di10b[1]+di107[1],-10.708,0,"ONLY");
- // gMC->Gspos("I107",2,"I10B",-0.0455,-di10b[1]+di107[1],3.536,0,"ONLY");
- // gMC->Gspos("I107",1,"I10B",-0.0455,-di10b[1]+di107[1],10.708,0,"ONLY");
- // gMC->Gspos("I107",4,"I10B",-0.0455,-di10b[1]+di107[1],-10.708,0,"ONLY");
- // gMC->Gspos("I107",3,"I10B",-0.0455,-di10b[1]+di107[1],-3.536,0,"ONLY");
-
- // Insertion of half-stave level in old SPD2
- gGeoManager->MakeVolumeAssembly("L2H-STAVE0");
- gGeoManager->MakeVolumeAssembly("L2H-STAVE1");
- gMC->Gspos("L2H-STAVE0",1,"I20B",0,0,0,0,"ONLY");
- gMC->Gspos("L2H-STAVE1",1,"I20B",0,0,0,0,"ONLY");
- gMC->Gspos("I1D7",1,"L2H-STAVE0",-0.0455,-di20b[1]+di1d7[1],10.708,0,"ONLY");
- gMC->Gspos("I1D7",2,"L2H-STAVE0",-0.0455,-di20b[1]+di1d7[1],3.536,0,"ONLY");
- gMC->Gspos("I1D7",3,"L2H-STAVE1",-0.0455,-di20b[1]+di1d7[1],-3.536,0,"ONLY");
- gMC->Gspos("I1D7",4,"L2H-STAVE1",-0.0455,-di20b[1]+di1d7[1],-10.708,0,"ONLY");
-// gMC->Gspos("I1D7",2,"I20B",-0.0455,-di20b[1]+di1d7[1],3.536,0,"ONLY");
-// gMC->Gspos("I1D7",1,"I20B",-0.0455,-di20b[1]+di1d7[1],10.708,0,"ONLY");
-// gMC->Gspos("I1D7",4,"I20B",-0.0455,-di20b[1]+di1d7[1],-10.708,0,"ONLY");
-// gMC->Gspos("I1D7",3,"I20B",-0.0455,-di20b[1]+di1d7[1],-3.536,0,"ONLY");
-
- gMC->Gspos("I109",1,"I10B",-0.138,0.015,-16.844,idrotm[201],"ONLY");
- gMC->Gspos("I109",2,"I10B",-0.138,0.015,16.844,0,"ONLY");
- gMC->Gspos("I108",1,"I10B",-0.138,-di10b[1]+2.*di107[1]+di108[1],0.0,0,"ONLY");
- gMC->Gspos("I105",1,"I20B",-0.05,-0.01,-16.844,idrotm[201],"ONLY");
- gMC->Gspos("I105",2,"I20B",-0.05,-0.01,16.844,0,"ONLY");
- gMC->Gspos("I109",3,"I20B",-0.138,0.015,-16.844,idrotm[201],"ONLY");
- gMC->Gspos("I109",4,"I20B",-0.138,0.015,16.844,0,"ONLY");
- gMC->Gspos("I108",2,"I20B",-0.138,-di20b[1]+2.*di1d7[1]+di108[1],0.0,0,"ONLY");
- gMC->Gspos("I112",2,"I113",0.25,0.02,0.0,idrotm[206],"ONLY");
- gMC->Gspos("I111",2,"I113",0.1318,-0.0008,0.0,idrotm[205],"ONLY");
- gMC->Gspos("I118",1,"I113",0.0,-0.0454,0.0,0,"ONLY");
- gMC->Gspos("I110",1,"I113",0.0,0.0492,0.0,0,"ONLY");
- gMC->Gspos("I114",1,"I113",0.063,0.0042,0.0,idrotm[202],"ONLY");
- gMC->Gspos("I115",1,"I113",0.063,0.0042,0.0,idrotm[202],"ONLY");
- gMC->Gspos("I115",2,"I113",-0.063,0.0042,0.0,idrotm[237],"ONLY");
- gMC->Gspos("I114",2,"I113",-0.063,0.0042,0.0,idrotm[237],"ONLY");
- gMC->Gspos("I116",1,"I113",0.0,0.0042,0.0,0,"ONLY");
- gMC->Gspos("I111",1,"I113",-0.1318,-0.0008,0.0,idrotm[204],"ONLY");
- gMC->Gspos("I112",1,"I113",-0.25,0.02,0.0,idrotm[203],"ONLY");
- gMC->Gspos("I106",1,"I107",0.0,-ddet1,-1.4,0,"ONLY");
- gMC->Gspos("I106",2,"I107",0.0,-ddet1,0.0,0,"ONLY");
- gMC->Gspos("I106",3,"I107",0.0,-ddet1,1.4,0,"ONLY");
- gMC->Gspos("I106",4,"I107",0.0,-ddet1,2.8,0,"ONLY");
- gMC->Gspos("I106",5,"I107",0.0,-ddet1,-2.8,0,"ONLY");
- gMC->Gspos("I101",1,"I107",0.0,dchip1,0.0,0,"ONLY");
- gMC->Gspos("I1D6",1,"I1D7",0.0,-ddet2,-1.4,0,"ONLY");
- gMC->Gspos("I1D6",2,"I1D7",0.0,-ddet2,0.0,0,"ONLY");
- gMC->Gspos("I1D6",3,"I1D7",0.0,-ddet2,1.4,0,"ONLY");
- gMC->Gspos("I1D6",4,"I1D7",0.0,-ddet2,2.8,0,"ONLY");
- gMC->Gspos("I1D6",5,"I1D7",0.0,-ddet2,-2.8,0,"ONLY");
- gMC->Gspos("I1D1",1,"I1D7",0.0,dchip2,0.0,0,"ONLY");
- gMC->Gspos("I117",1,"I116",0.0,0.0,0.0,0,"ONLY");
- gMC->Gspos("ITS1",1,"I101",0.0,0.0,0.0,0,"ONLY");
- gMC->Gspos("ITS2",1,"I1D1",0.0,0.0,0.0,0,"ONLY");
- gMC->Gspos("I651",1,"IT12",0.0,0.0,26.05,0,"ONLY");
- gMC->Gspos("I651",2,"IT12",0.0,0.0,-26.05,0,"ONLY");
-
- gMC->Gspos("I650",16,"IT12",0.0,0.0,22.0,idrotm[1104],"ONLY");
- gMC->Gspos("I650",20,"IT12",0.0,0.0,22.0,idrotm[1130],"ONLY");
- gMC->Gspos("I650",18,"IT12",0.0,0.0,22.0,idrotm[1117],"ONLY");
- gMC->Gspos("I650",1,"IT12",0.0,0.0,22.0,0,"ONLY");
- gMC->Gspos("I650",4,"IT12",0.0,0.0,22.0,idrotm[1106],"ONLY");
- gMC->Gspos("I650",6,"IT12",0.0,0.0,22.0,idrotm[1039],"ONLY");
- gMC->Gspos("I650",8,"IT12",0.0,0.0,22.0,idrotm[1107],"ONLY");
- gMC->Gspos("I650",10,"IT12",0.0,0.0,22.0,idrotm[1065],"ONLY");
- gMC->Gspos("I650",12,"IT12",0.0,0.0,22.0,idrotm[1078],"ONLY");
- gMC->Gspos("I650",14,"IT12",0.0,0.0,22.0,idrotm[1091],"ONLY");
- gMC->Gspos("I650",19,"IT12",0.0,0.0,-22.0,idrotm[1108],"ONLY");
- gMC->Gspos("I650",2,"IT12",0.0,0.0,-22.0,idrotm[1109],"ONLY");
- gMC->Gspos("I650",3,"IT12",0.0,0.0,-22.0,idrotm[1110],"ONLY");
- gMC->Gspos("I650",5,"IT12",0.0,0.0,-22.0,idrotm[1111],"ONLY");
- gMC->Gspos("I650",7,"IT12",0.0,0.0,-22.0,idrotm[1112],"ONLY");
- gMC->Gspos("I650",9,"IT12",0.0,0.0,-22.0,idrotm[1113],"ONLY");
- gMC->Gspos("I650",11,"IT12",0.0,0.0,-22.0,idrotm[1114],"ONLY");
- gMC->Gspos("I650",13,"IT12",0.0,0.0,-22.0,idrotm[1115],"ONLY");
- gMC->Gspos("I650",15,"IT12",0.0,0.0,-22.0,idrotm[1116],"ONLY");
- gMC->Gspos("I650",17,"IT12",0.0,0.0,-22.0,idrotm[1118],"ONLY");
- gMC->Gspos("I666",1,"I650",0.0,0.0,0.25,idrotm[1003],"ONLY");
-
- gMC->Gspos("I667",1,"I650",0.1102,0.9945,0.45,idrotm[1088],"ONLY");
- gMC->Gspos("I669",3,"I650",0.1883,4.0372,-3.2,0,"ONLY");
- gMC->Gspos("I671",3,"I650",0.1883,4.0372,0.6,0,"ONLY");
- gMC->Gspos("I669",2,"I650",1.3343,4.0609,-3.2,0,"ONLY");
- gMC->Gspos("I671",2,"I650",1.3343,4.0609,0.6,0,"ONLY");
- gMC->Gspos("I669",6,"I650",2.9567,6.1959,-3.2,idrotm[1089],"ONLY");
- gMC->Gspos("I671",6,"I650",2.9567,6.1959,0.6,idrotm[1089],"ONLY");
- gMC->Gspos("I669",5,"I650",1.9511,6.5822,-3.2,idrotm[1011],"ONLY");
- gMC->Gspos("I671",5,"I650",1.9511,6.5822,0.6,idrotm[1011],"ONLY");
- gMC->Gspos("I669",4,"I650",0.8974,6.8064,-3.2,idrotm[1090],"ONLY");
- gMC->Gspos("I671",4,"I650",0.8974,6.8064,0.6,idrotm[1090],"ONLY");
- gMC->Gspos("I669",1,"I650",-0.1784,6.863,-3.2,0,"ONLY");
- gMC->Gspos("I671",1,"I650",-0.1784,6.863,0.6,0,"ONLY");
- gMC->Gspos("I673",1,"I650",0.2173,4.8037,1.8,0,"ONLY");
- gMC->Gspos("I673",6,"I650",1.5093,4.5605,1.8,0,"ONLY");
- gMC->Gspos("I673",4,"I650",-0.173,6.2531,1.8,idrotm[1092],"ONLY");
- gMC->Gspos("I673",3,"I650",0.8073,6.2032,1.8,idrotm[1093],"ONLY");
- gMC->Gspos("I673",2,"I650",1.7678,6.0005,1.8,idrotm[1094],"ONLY");
- gMC->Gspos("I673",5,"I650",2.6847,5.6501,1.8,0,"ONLY");
- gMC->Gspos("I676",2,"I650",1.7618,5.2269,2.5,0,"ONLY");
- gMC->Gspos("I676",1,"I650",0.4018,5.5869,2.5,0,"ONLY");
- gMC->Gspos("I668",1,"I667",0.0,0.0,0.0,0,"ONLY");
- gMC->Gspos("I670",1,"I669",0.0,0.0,0.0,0,"ONLY");
- gMC->Gspos("I672",1,"I671",0.0,0.0,0.0,0,"ONLY");
- gMC->Gspos("I674",1,"I673",0.0,0.0,0.0,0,"MANY");
- gMC->Gspos("I675",1,"I673",0.0,0.0,-0.5,0,"ONLY");
- gMC->Gspos("I677",1,"I676",0.0,0.0,0.0,0,"ONLY");
- gMC->Gspos("I678",1,"I676",0.0,0.0,-0.95,0,"ONLY");
- }
-
- // --- Place SDD volumes into their mother volume IT34
-
- // -- position SDD detectors of ladder 3 / layer 3
- if (! AliITSInitGeometry::SDDIsTGeoNative()) {
-
- gMC->Gspos("ITS3", 1,"I302", 0.0, 0.0, 0.0, 0, "ONLY");
- ySDD = ySDDsep/2.+iI302dits[1];
- for (iSDD=0; iSDD<6; iSDD++) {
- gMC->Gspos("I302", iSDD+1, "I004", 0.0, ySDD, zSDDlay3[iSDD], 0, "ONLY");
- ySDD = -ySDD;
- }
-
- gMC->Gspos("I004", 1,"IT34", -3.2777, 14.3607, 0.0, idrotm[321],"ONLY");
- gMC->Gspos("I004", 2,"IT34", -9.5581, 11.9855, 0.0, idrotm[333],"ONLY");
- gMC->Gspos("I004", 3,"IT34",-13.2713, 6.3911, 0.0, idrotm[336],"ONLY");
- gMC->Gspos("I004", 4,"IT34",-15.33, 0.0, 0.0, idrotm[350],"ONLY");
- gMC->Gspos("I004", 5,"IT34",-13.2713, -6.3911, 0.0, idrotm[313],"ONLY");
- gMC->Gspos("I004", 6,"IT34", -9.5581, -11.9855, 0.0, idrotm[311],"ONLY");
- gMC->Gspos("I004", 7,"IT34", -3.2777, -14.3607, 0.0, idrotm[310],"ONLY");
- gMC->Gspos("I004", 8,"IT34", 3.4112, -14.9456, 0.0, idrotm[386],"ONLY");
- gMC->Gspos("I004", 9,"IT34", 9.184, -11.5164, 0.0, idrotm[309],"ONLY");
- gMC->Gspos("I004",10,"IT34", 13.8119, -6.6514, 0.0, idrotm[308],"ONLY");
- gMC->Gspos("I004",11,"IT34", 14.73, 0.0, 0.0, idrotm[356],"ONLY");
- gMC->Gspos("I004",12,"IT34", 13.8119, 6.6514, 0.0, idrotm[307],"ONLY");
- gMC->Gspos("I004",13,"IT34", 9.184, 11.5164, 0.0, idrotm[306],"ONLY");
- gMC->Gspos("I004",14,"IT34", 3.4113, 14.9456, 0.0, idrotm[305],"ONLY");
-
-
- // -- position SDD detectors of ladder 4 / layer 4
-
- gMC->Gspos("ITS4", 1,"I402", 0.0, 0.000, 0.0, 0,"ONLY");
- ySDD = -(ySDDsep/2.+iI402dits[1]);
- for (iSDD=0; iSDD<8; iSDD++) {
- gMC->Gspos("I402", iSDD+1, "I005", 0.0, ySDD, zSDDlay4[iSDD], 0, "ONLY");
- ySDD = -ySDD;
- }
-
- gMC->Gspos("I005", 1,"IT34", -3.3629, 23.3895,-0.15, idrotm[335],"ONLY");
- gMC->Gspos("I005", 2,"IT34",-10.0447, 21.9949,-0.15, idrotm[332],"ONLY");
- gMC->Gspos("I005", 3,"IT34",-15.4744, 17.8584,-0.15, idrotm[331],"ONLY");
- gMC->Gspos("I005", 4,"IT34",-20.3415, 13.0727,-0.15, idrotm[366],"ONLY");
- gMC->Gspos("I005", 5,"IT34",-22.6728, 6.6573,-0.15, idrotm[330],"ONLY");
- gMC->Gspos("I005", 6,"IT34",-24.18, 0.0, -0.15, idrotm[350],"ONLY");
- gMC->Gspos("I005", 7,"IT34",-22.6728, -6.6573,-0.15, idrotm[329],"ONLY");
- gMC->Gspos("I005", 8,"IT34",-20.3415, -13.0727,-0.15, idrotm[328],"ONLY");
- gMC->Gspos("I005", 9,"IT34",-15.4744, -17.8584,-0.15, idrotm[327],"ONLY");
- gMC->Gspos("I005",10,"IT34",-10.0447, -21.9949,-0.15, idrotm[326],"ONLY");
- gMC->Gspos("I005",11,"IT34", -3.3629, -23.3895,-0.15, idrotm[325],"ONLY");
- gMC->Gspos("I005",12,"IT34", 3.4412, -23.9339,-0.15, idrotm[324],"ONLY");
- gMC->Gspos("I005",13,"IT34", 9.8163, -21.4946,-0.15, idrotm[323],"ONLY");
- gMC->Gspos("I005",14,"IT34", 15.8345, -18.274, -0.15, idrotm[322],"ONLY");
- gMC->Gspos("I005",15,"IT34", 19.8788, -12.7753,-0.15, idrotm[320],"ONLY");
- gMC->Gspos("I005",16,"IT34", 23.2005, -6.8123,-0.15, idrotm[319],"ONLY");
- gMC->Gspos("I005",17,"IT34", 23.63, 0.0, -0.15, idrotm[318],"ONLY");
- gMC->Gspos("I005",18,"IT34", 23.2005, 6.8123,-0.15, idrotm[317],"ONLY");
- gMC->Gspos("I005",19,"IT34", 19.8788, 12.7753,-0.15, idrotm[316],"ONLY");
- gMC->Gspos("I005",20,"IT34", 15.8345, 18.274, -0.15, idrotm[315],"ONLY");
- gMC->Gspos("I005",21,"IT34", 9.8163, 21.4946,-0.15, idrotm[314],"ONLY");
- gMC->Gspos("I005",22,"IT34", 3.4412, 23.9339,-0.15, idrotm[334],"ONLY");
-
-
- // -- build block of the SDD ladder frame holding the electronics
-
- gMC->Gspos("I019", 1,"I018", -1.9, -1.735, 0.0, idrotm[344], "ONLY");
- gMC->Gspos("I019", 2,"I018", 1.987, -1.5843, 0.0, idrotm[343], "ONLY");
- gMC->Gspos("I019", 3,"I018", -0.087, 1.7066, 0.0, idrotm[342], "ONLY");
-
- gMC->Gspos("I020", 1,"I018", -1.9782, -1.569, 0.0, idrotm[342], "ONLY");
- gMC->Gspos("I020", 2,"I018", 1.8824, -1.735, 0.0, idrotm[344], "ONLY");
- gMC->Gspos("I020", 3,"I018", 0.0958, 1.6913, 0.0, idrotm[343], "ONLY");
-
- gMC->Gspos("I021", 1,"I018", 1.0761, 0.0835, 2.6008, idrotm[340], "ONLY");
- gMC->Gspos("I021", 2,"I018", -1.0761, 0.0835,-2.8008, idrotm[339], "ONLY");
- gMC->Gspos("I021", 3,"I018", -1.0761, 0.0835,-1.0492, idrotm[338], "ONLY");
- gMC->Gspos("I021", 4,"I018", 1.0761, 0.0835,-2.8008, idrotm[337], "ONLY");
- gMC->Gspos("I021", 5,"I018", 1.0761, 0.0835,-1.0492, idrotm[340], "ONLY");
- gMC->Gspos("I021", 6,"I018", -1.0761, 0.0835, 0.8492, idrotm[339], "ONLY");
- gMC->Gspos("I021", 7,"I018", -1.0761, 0.0835, 2.6008, idrotm[338], "ONLY");
- gMC->Gspos("I021", 8,"I018", 1.0761, 0.0835, 0.8492, idrotm[337], "ONLY");
-
- gMC->Gspos("I022", 1,"I018", 0.0, -1.79, 3.55, idrotm[312], "ONLY");
- gMC->Gspos("I022", 2,"I018", 0.0, -1.79, -0.1, idrotm[312], "ONLY");
-
- gMC->Gspos("I023", 1,"I018", 0.0, -1.79, 1.725, idrotm[341], "ONLY");
- gMC->Gspos("I023", 2,"I018", 0.0, -1.79, -1.925, idrotm[341], "ONLY");
-
- gMC->Gspos("I033", 1,"I018", 1.8, -1.75, 1.35, 0, "MANY");
- gMC->Gspos("I033", 2,"I018", -1.8, -1.75, -2.65, idrotm[345], "MANY");
- gMC->Gspos("I033", 3,"I018", -1.8, -1.75, 1.35, idrotm[345], "MANY");
- gMC->Gspos("I033", 4,"I018", 1.8, -1.75, -2.65, 0, "MANY");
-
- gMC->Gspos("I034", 1,"I018", 1.6, -1.775, 1.35, idrotm[312], "ONLY");
- gMC->Gspos("I034", 2,"I018", -1.6, -1.775, -2.65, idrotm[348], "ONLY");
- gMC->Gspos("I034", 3,"I018", -1.6, -1.775, 1.35, idrotm[348], "ONLY");
- gMC->Gspos("I034", 4,"I018", 1.6, -1.775, -2.65, idrotm[312], "ONLY");
-
- gMC->Gspos("I035", 1,"I018", 1.7, -0.55, iI018dits[2]-iI035dits[2], 0, "ONLY");
- gMC->Gspos("I035", 2,"I018", -1.7, -0.55, iI018dits[2]-iI035dits[2], 0, "ONLY");
-
- gMC->Gspos("I036", 1,"I018", 0.3087, 1.7191, 3.56, idrotm[346], "ONLY");
- gMC->Gspos("I036", 2,"I018", 0.3087, 1.7191,-0.11, idrotm[346], "ONLY");
- gMC->Gspos("I036", 3,"I018", -0.3087, 1.7191,-0.11, idrotm[347], "ONLY");
- gMC->Gspos("I036", 4,"I018", -0.3087, 1.7191, 3.56, idrotm[347], "ONLY");
-
- gMC->Gspos("I037", 1,"I018", iSDDCoolPipe[0], iSDDCoolPipe[1], iSDDCoolPipe[2], 0 , "ONLY");
- gMC->Gspos("I037", 2,"I018", -iSDDCoolPipe[0], iSDDCoolPipe[1], iSDDCoolPipe[2], 0 , "ONLY");
-
- gMC->Gspos("I038", 1,"I018", iSDDCoolPipe[0], iSDDCoolPipe[1], iSDDCoolPipe[2], 0 , "ONLY");
- gMC->Gspos("I038", 2,"I018", -iSDDCoolPipe[0], iSDDCoolPipe[1], iSDDCoolPipe[2], 0 , "ONLY");
-
- gMC->Gspos("I040", 1,"I018", 1.9204, -0.7118, 0.0, idrotm[346],"ONLY");
- gMC->Gspos("I040", 2,"I018", -1.9204, -0.7118, 0.0, idrotm[347],"ONLY");
- gMC->Gspos("I041", 1,"I018", iSDDCoolPipe[0], iSDDCoolPipe[1], iSDDCoolPipe[2], idrotm[346], "ONLY");
- gMC->Gspos("I041", 2,"I018", -iSDDCoolPipe[0], iSDDCoolPipe[1], iSDDCoolPipe[2], idrotm[347], "ONLY");
-
-
- // -- build block of the SDD electronics (heat bridge, chips, hybrid, anode microcable)
-
- xI050 = iSDDCoolPipe[0]+iSDDCoolPipe[1]*sin30+iI050dits[1]/cos30+iI041dits[1];
- yI050 = 0;
- xI039 = -iSDDCoolPipe[1]/cos30;
- yI039 = -iI050dits[1]+iI039dits[1];
- gMC->Gspos("I039", 1,"I050", xI039, yI039, 0.0, 0, "ONLY");
- xI042 = xI039+iI039dits[0]-xI042space-iI042dits[0];
- yI042 = yI039+iI039dits[1]+iI042dits[1];
- xI043 = xI039-iI039dits[0]+xI043space+iI043dits[0];
- yI043 = yI039+iI039dits[1]+iI043dits[1];
- zChipSpace = iI042dits[2];
- if (zChipSpace < iI043dits[2]) {
- zChipSpace = iI043dits[2];
- }
- zChipSpace = zChipSpace * 2;
- yI051space = (2*iI039dits[2] - 4*zChipSpace)/5;
- zchip = -iI039dits[2] + yI051space + zChipSpace/2.;
- for (ichip=0; ichip<4; ichip++) {
- gMC->Gspos("I042", ichip+1, "I050", xI042, yI042, zchip, 0, "ONLY");
- gMC->Gspos("I043", ichip+1, "I050", xI043, yI043, zchip, 0, "ONLY");
- zchip += zChipSpace + yI051space;
- }
- xcap = 2*iI039dits[0]/5.;
- yI051 = yI039+iI039dits[1]+iI051dits[1];
- zI051 = -iI039dits[2] + yI051space/3.;
- icap = 1;
- for (ichip=0; ichip<5; ichip++) {
- xI051 = xI039-iI039dits[0]+xcap;
- gMC->Gspos("I051", icap++,"I050", xI051, yI051, zI051, 0, "ONLY");
- zI051 += yI051space/3.;
- gMC->Gspos("I051", icap++,"I050", xI051, yI051, zI051, 0, "ONLY");
- xI051 += xcap;
- gMC->Gspos("I051", icap++,"I050", xI051, yI051, zI051, 0, "ONLY");
- xI051 += xcap;
- gMC->Gspos("I051", icap++,"I050", xI051, yI051, zI051, 0, "ONLY");
- xI051 += xcap;
- gMC->Gspos("I051", icap++,"I050", xI051, yI051, zI051, 0, "ONLY");
- zI051 -= yI051space/3.;
- if (ichip == 0) {
- gMC->Gspos("I051", icap++,"I050", xI051, yI051, zI051, 0, "ONLY");
- }
- zI051 += zChipSpace + yI051space;
- }
- xI052 = -iI050dits[0]+iI052dits[0];
- yI052 = yI051+iI051dits[1]+iI052dits[1];
- gMC->Gspos("I052", 1,"I050", xI052, yI052, 0.0, 0, "ONLY");
- xI044 = iI050dits[0]-iI044dits[3];
- yI044 = yI052+iI052dits[1]+iI044dits[2];
- gMC->Gspos("I044", 1,"I050", xI044, yI044, 0.0, idrotm[301], "ONLY");
- gMC->Gspos("I050", 1,"I018", xI050, yI050, 0.0, idrotm[346],"ONLY");
- gMC->Gspos("I050", 2,"I018", -xI050, yI050, 0.0, idrotm[347],"ONLY");
-
-
- // -- build block of the SDD ladder frame at the end ladders
-
- gMC->Gspos("I021",12,"I024", 1.0761, 0.0836,-0.1242, idrotm[340], "ONLY");
- gMC->Gspos("I021",11,"I024", -1.0761, 0.0836,-0.1242, idrotm[338], "ONLY");
- gMC->Gspos("I021",13,"I024", -1.0761, 0.0836,-1.8758, idrotm[339], "ONLY");
- gMC->Gspos("I021",14,"I024", 1.0761, 0.0836,-1.8758, idrotm[337], "ONLY");
-
- gMC->Gspos("I022", 3,"I024", 0.0, -1.7899, 0.825, idrotm[312], "ONLY");
-
- gMC->Gspos("I023", 3,"I024", 0.0, -1.7899,-1.0, idrotm[341], "ONLY");
-
- gMC->Gspos("I025", 1,"I024", -1.9, -1.7349, 0.0, idrotm[344], "ONLY");
- gMC->Gspos("I025", 2,"I024", 1.987, -1.5842, 0.0, idrotm[343], "ONLY");
-
- gMC->Gspos("I026", 1,"I024", -1.9782, -1.5689, 0.0, idrotm[342], "ONLY");
- gMC->Gspos("I026", 2,"I024", 1.8824, -1.7349, 0.0, idrotm[344], "ONLY");
-
- gMC->Gspos("I029", 1,"I024", -0.087, 1.7067, iI029dits[2]-iI024dits[2], idrotm[342], "ONLY");
-
- gMC->Gspos("I030", 1,"I024", 0.0958, 1.6914, iI030dits[2]-iI024dits[2], idrotm[343], "ONLY");
-
- gMC->Gspos("I031", 1,"I024", iSDDCoolPipe[0], iSDDCoolPipe[1], iSDDCoolPipe[2], 0 ,"ONLY");
- gMC->Gspos("I031", 2,"I024", -iSDDCoolPipe[0], iSDDCoolPipe[1], iSDDCoolPipe[2], 0 ,"ONLY");
-
- gMC->Gspos("I032", 1,"I024", iSDDCoolPipe[0], iSDDCoolPipe[1], iSDDCoolPipe[2], 0 ,"ONLY");
- gMC->Gspos("I032", 2,"I024", -iSDDCoolPipe[0], iSDDCoolPipe[1], iSDDCoolPipe[2], 0 ,"ONLY");
-
-
- xI424 = iI028dits[0]/3.;
- yI424 = -iI028dits[1]+iI424dits[1];
- gMC->Gspos("I422", 1,"I421", 0.0, 0.0, 0.0, 0, "ONLY");
- gMC->Gspos("I423", 1,"I421", 0.0, 0.0, iI421dits[2]-iI423dits[2], 0, "ONLY");
- gMC->Gspos("I421", 1,"I420", 0.0, 0.0, 0.0, idrotm[312], "ONLY");
- gMC->Gspos("I420", 1,"I028", -iI028dits[0]/3., iI028dits[1]-iI420dits[1], 0.0, 0, "ONLY");
- gMC->Gspos("I424", 1,"I028", xI424, yI424, 0.0, 0, "ONLY");
- gMC->Gspos("I028", 1,"I024", 0.0, iI028dits[1]-iI024dits[1], iI024dits[2]-iI028dits[2], 0, "ONLY");
-
-
- // -- build the SDD ladder 3
-
- indI425 = 1;
- gMC->Gspos("I024", 1,"I047", 0.0, 0.0, 24.625, 0, "ONLY");
- gMC->Gspos("I018", 1,"I047", 0.0, 0.0, 3.65, 0, "ONLY");
- gMC->Gspos("I018", 2,"I047", 0.0, 0.0, 10.95, 0, "ONLY");
- gMC->Gspos("I018", 3,"I047", 0.0, 0.0, 18.25, 0, "ONLY");
- gMC->Gspos("I018", 4,"I047", 0.0, 0.0, -3.65, 0, "ONLY");
- gMC->Gspos("I018", 5,"I047", 0.0, 0.0, -10.95, 0, "ONLY");
- gMC->Gspos("I018", 6,"I047", 0.0, 0.0, -18.25, 0, "ONLY");
- gMC->Gspos("I024", 2,"I047", 0.0, 0.0, -24.625, idrotm[355], "ONLY");
- nameHV[0] = 'I';
- nameHV[1] = '3';
- nameHV[2] = '1';
- nameHV[4] = '\0';
- for (iSDD=0; iSDD<3; iSDD++) {
- nameHV[3] = (Char_t)(48+iSDD+5);
- dits[0] = 1.350000;
- dits[1] = iI425dits[1];
- dits[2] = (iI047dits[2] - 2*iI024dits[2] - zSDDlay3[iSDD])/2.;
- gMC->Gsvolu(nameHV, "BOX ", idtmed[279], dits, 3);
- xHV = 0.0;
- yHV = -iI047dits[1] + (2*iSDD+1)*dits[1];
- zHV = iI047dits[2] - 2*iI024dits[2] - dits[2];
- gMC->Gspos(nameHV, 1,"I047", xHV, yHV, zHV, 0, "ONLY");
- gMC->Gspos(nameHV, 2,"I047", xHV, yHV, -zHV, 0, "ONLY");
- gMC->Gspos("I425", indI425++,"I047", xI424, yHV, 24.625, 0, "ONLY");
- gMC->Gspos("I425", indI425++,"I047", -xI424, yHV, -24.625, 0, "ONLY");
- }
- nameLV[0] = 'I';
- nameLV[1] = '3';
- nameLV[2] = '1';
- nameLV[4] = '\0';
- for (iSDD=0; iSDD<3; iSDD++) {
- nameLV[3] = (Char_t)(48+iSDD+1);
- dits[0] = 1.350000;
- dits[1] = 0.004423;
- dits[2] = (iI047dits[2] - (2*iSDD+1)*iI018dits[2] - iI039dits[2])/2.;
- gMC->Gsvolu(nameLV, "BOX ", idtmed[280], dits, 3);
- yLV = iI018dits[1] - dits[0]*cos30 - dits[1]*sin30;
- xLV = xI050 -
- TMath::Abs(yI050-yLV)*sin30/cos30 +
- (iI050dits[1]+(2*iSDD+1)*dits[1])/cos30;
- zLV = iI047dits[2] - dits[2];
- gMC->Gspos(nameLV, 1,"I047", xLV, yLV, zLV, idrotm[346], "ONLY");
- gMC->Gspos(nameLV, 2,"I047", xLV, yLV, -zLV, idrotm[346], "ONLY");
- gMC->Gspos(nameLV, 3,"I047", -xLV, yLV, zLV, idrotm[347], "ONLY");
- gMC->Gspos(nameLV, 4,"I047", -xLV, yLV, -zLV, idrotm[347], "ONLY");
- }
-
-
- // -- build the SDD ladder 4
-
-
- gMC->Gspos("I024", 3,"I048", -0.0001, 0.0, 31.925, 0, "ONLY");
- gMC->Gspos("I018", 7,"I048", -0.0001, 0.0, -3.65, 0, "ONLY");
- gMC->Gspos("I018", 8,"I048", -0.0001, 0.0, 3.65, 0, "ONLY");
- gMC->Gspos("I018", 9,"I048", -0.0001, 0.0, 10.95, 0, "ONLY");
- gMC->Gspos("I018",10,"I048", -0.0001, 0.0, 18.25, 0, "ONLY");
- gMC->Gspos("I018",11,"I048", -0.0001, 0.0, 25.55, 0, "ONLY");
- gMC->Gspos("I018",12,"I048", -0.0001, 0.0, -10.95, 0, "ONLY");
- gMC->Gspos("I018",13,"I048", -0.0001, 0.0, -18.25, 0, "ONLY");
- gMC->Gspos("I018",14,"I048", -0.0001, 0.0, -25.55, 0, "ONLY");
- gMC->Gspos("I024", 4,"I048", -0.0001, 0.0, -31.925, idrotm[355], "ONLY");
- nameHV[0] = 'I';
- nameHV[1] = '4';
- nameHV[2] = '1';
- nameHV[4] = '\0';
- for (iSDD=0; iSDD<4; iSDD++) {
- nameHV[3] = (Char_t)(48+iSDD+5);
- dits[0] = 1.350000;
- dits[1] = iI425dits[1];
- dits[2] = (iI048dits[2] - 2*iI024dits[2] - zSDDlay4[iSDD])/2.;
- gMC->Gsvolu(nameHV, "BOX ", idtmed[279], dits, 3);
- xHV = -0.0001;
- yHV = -iI048dits[1] + (2*iSDD+1)*dits[1];
- zHV = iI048dits[2] - 2*iI024dits[2] - dits[2];
- gMC->Gspos(nameHV, 1,"I048", xHV, yHV, zHV, 0, "ONLY");
- gMC->Gspos(nameHV, 2,"I048", xHV, yHV, -zHV, 0, "ONLY");
- gMC->Gspos("I425", indI425++,"I048", xI424, yHV, 31.925, 0, "ONLY");
- gMC->Gspos("I425", indI425++,"I048", -xI424, yHV, -31.925, 0, "ONLY");
- }
- nameLV[0] = 'I';
- nameLV[1] = '4';
- nameLV[2] = '1';
- nameLV[4] = '\0';
- for (iSDD=0; iSDD<4; iSDD++) {
- nameLV[3] = (Char_t)(48+iSDD+1);
- dits[0] = 1.350000;
- dits[1] = 0.004423;
- dits[2] = (iI048dits[2] - (2*iSDD+1)*iI018dits[2] - iI039dits[2])/2.;
- gMC->Gsvolu(nameLV, "BOX ", idtmed[280], dits, 3);
- yLV = iI018dits[1] - dits[0]*cos30 - dits[1]*sin30;
- xLV = xI050 -
- TMath::Abs(yI050-yLV)*sin30/cos30 +
- (iI050dits[1]+(2*iSDD+1)*dits[1])/cos30;
- zLV = iI048dits[2] - dits[2];
- gMC->Gspos(nameLV, 1,"I048", xLV, yLV, zLV, idrotm[346], "ONLY");
- gMC->Gspos(nameLV, 2,"I048", xLV, yLV, -zLV, idrotm[346], "ONLY");
- gMC->Gspos(nameLV, 3,"I048", -xLV, yLV, zLV, idrotm[347], "ONLY");
- gMC->Gspos(nameLV, 4,"I048", -xLV, yLV, -zLV, idrotm[347], "ONLY");
- }
-
-
- // -- build the SDD barrel (layers 3 and 4)
-
- gMC->Gspos("I047", 1,"IT34", -3.7528, 16.4422, 0.0, idrotm[321], "ONLY");
- gMC->Gspos("I047", 2,"IT34",-10.8892, 13.6547, 0.0, idrotm[333], "ONLY");
- gMC->Gspos("I047", 3,"IT34",-15.1948, 7.3175, 0.0, idrotm[336], "ONLY");
- gMC->Gspos("I047", 4,"IT34",-17.465, 0.0, 0.0, idrotm[350], "ONLY");
- gMC->Gspos("I047", 5,"IT34",-15.1948, -7.3174, 0.0, idrotm[313], "ONLY");
- gMC->Gspos("I047", 6,"IT34",-10.8893, -13.6547, 0.0, idrotm[311], "ONLY");
- gMC->Gspos("I047", 7,"IT34", -3.7528, -16.4422, 0.0, idrotm[310], "ONLY");
- gMC->Gspos("I047", 8,"IT34", 3.8863, -17.0271, 0.0, idrotm[386], "ONLY");
- gMC->Gspos("I047", 9,"IT34", 10.5152, -13.1856, 0.0, idrotm[309], "ONLY");
- gMC->Gspos("I047",10,"IT34", 15.7354, -7.5778, 0.0, idrotm[308], "ONLY");
- gMC->Gspos("I047",11,"IT34", 16.865, 0.0, 0.0, idrotm[356], "ONLY");
- gMC->Gspos("I047",12,"IT34", 15.7354, 7.5778, 0.0, idrotm[307], "ONLY");
- gMC->Gspos("I047",13,"IT34", 10.5152, 13.1856, 0.0, idrotm[306], "ONLY");
- gMC->Gspos("I047",14,"IT34", 3.8863, 17.0271, 0.0, idrotm[305], "ONLY");
-
- gMC->Gspos("I048", 1,"IT34", -3.6667, 25.5027, 0.0, idrotm[335], "ONLY");
- gMC->Gspos("I048", 2,"IT34",-10.9317, 23.937, 0.0, idrotm[332], "ONLY");
- gMC->Gspos("I048", 3,"IT34",-16.8725, 19.4719, 0.0, idrotm[331], "ONLY");
- gMC->Gspos("I048", 4,"IT34",-22.1376, 14.227, 0.0, idrotm[366], "ONLY");
- gMC->Gspos("I048", 5,"IT34",-24.7213, 7.2588, 0.0, idrotm[330], "ONLY");
- gMC->Gspos("I048", 6,"IT34",-26.315, 0.0, 0.0, idrotm[350], "ONLY");
- gMC->Gspos("I048", 7,"IT34",-24.7213, -7.2588, 0.0, idrotm[329], "ONLY");
- gMC->Gspos("I048", 8,"IT34",-22.1376, -14.227, 0.0, idrotm[328], "ONLY");
- gMC->Gspos("I048", 9,"IT34",-16.8725, -19.4719, 0.0, idrotm[327], "ONLY");
- gMC->Gspos("I048",10,"IT34",-10.9316, -23.937, 0.0, idrotm[326], "ONLY");
- gMC->Gspos("I048",11,"IT34", -3.6667, -25.5027, 0.0, idrotm[325], "ONLY");
- gMC->Gspos("I048",12,"IT34", 3.745, -26.0472, 0.0, idrotm[324], "ONLY");
- gMC->Gspos("I048",13,"IT34", 10.7032, -23.4367, 0.0, idrotm[323], "ONLY");
- gMC->Gspos("I048",14,"IT34", 17.2327, -19.8876, 0.0, idrotm[322], "ONLY");
- gMC->Gspos("I048",15,"IT34", 21.6749, -13.9296, 0.0, idrotm[320], "ONLY");
- gMC->Gspos("I048",16,"IT34", 25.2491, -7.4138, 0.0, idrotm[319], "ONLY");
- gMC->Gspos("I048",17,"IT34", 25.765, 0.0, 0.0, idrotm[318], "ONLY");
- gMC->Gspos("I048",18,"IT34", 25.2491, 7.4138, 0.0, idrotm[317], "ONLY");
- gMC->Gspos("I048",19,"IT34", 21.6749, 13.9296, 0.0, idrotm[316], "ONLY");
- gMC->Gspos("I048",20,"IT34", 17.2327, 19.8876, 0.0, idrotm[315], "ONLY");
- gMC->Gspos("I048",21,"IT34", 10.7032, 23.4367, 0.0, idrotm[314], "ONLY");
- gMC->Gspos("I048",22,"IT34", 3.745, 26.0472, 0.0, idrotm[334], "ONLY");
- }
-
- // --- Place SSD volumes into their mother volume IT56
-
- if (! AliITSInitGeometry::SSDIsTGeoNative()) {
-
- gMC->Gspos("I570",14,"IT56",-28.0681,-36.0619,-0.27,idrotm[566],"ONLY");
- gMC->Gspos("I570",15,"IT56",-21.677,-40.0556,-0.27,idrotm[567],"ONLY");
- gMC->Gspos("I570",16,"IT56",-14.838,-43.2217,-0.27,idrotm[568],"ONLY");
- gMC->Gspos("I570",17,"IT56",-7.4965,-44.9238,-0.27,idrotm[569],"ONLY");
- gMC->Gspos("I570",18,"IT56",-0.27,-45.6977,-0.27,idrotm[533],"ONLY");
- gMC->Gspos("I570",19,"IT56",7.4965,-44.9238,-0.27,idrotm[534],"ONLY");
- gMC->Gspos("I570",20,"IT56",14.838,-43.2217,-0.27,idrotm[535],"ONLY");
- gMC->Gspos("I570",21,"IT56",21.677,-40.0556,-0.27,idrotm[623],"ONLY");
- gMC->Gspos("I570",22,"IT56",28.0681,-36.0619,-0.27,idrotm[537],"ONLY");
- gMC->Gspos("I570",23,"IT56",33.5085,-30.8468,-0.27,idrotm[538],"ONLY");
- gMC->Gspos("I570",24,"IT56",38.2566,-24.9943,-0.27,idrotm[539],"ONLY");
- gMC->Gspos("I570",25,"IT56",41.7089,-18.2952,-0.27,idrotm[540],"ONLY");
- gMC->Gspos("I570",26,"IT56",44.2994,-11.2181,-0.27,idrotm[541],"ONLY");
- gMC->Gspos("I570",27,"IT56",45.3894,-3.7611,-0.27,idrotm[542],"ONLY");
- gMC->Gspos("I570",28,"IT56",45.5416,3.7737,-0.27,idrotm[543],"ONLY");
- gMC->Gspos("I570",29,"IT56",44.1513,11.1806,-0.27,idrotm[544],"ONLY");
- gMC->Gspos("I570",30,"IT56",41.8487,18.3566,-0.27,idrotm[545],"ONLY");
- gMC->Gspos("I570",31,"IT56",38.1287,24.9107,-0.27,idrotm[546],"ONLY");
- gMC->Gspos("I570",32,"IT56",33.6209,30.9502,-0.27,idrotm[547],"ONLY");
- gMC->Gspos("I570",33,"IT56",27.9743,35.9414,-0.27,idrotm[548],"ONLY");
- gMC->Gspos("I570",34,"IT56",21.7497,40.1899,-0.27,idrotm[549],"ONLY");
- gMC->Gspos("I570",35,"IT56",14.7884,43.0772,-0.27,idrotm[550],"ONLY");
- gMC->Gspos("I570",36,"IT56",7.5216,45.0744,-0.27,idrotm[551],"ONLY");
- gMC->Gspos("I570",37,"IT56",0.00,45.545,-0.27,0,"ONLY");
- gMC->Gspos("I570",38,"IT56",-7.5216,45.0744,-0.27,idrotm[552],"ONLY");
- gMC->Gspos("I570",1,"IT56",-14.7884,43.0772,-0.27,idrotm[553],"ONLY");
- gMC->Gspos("I570",2,"IT56",-21.7497,40.1899,-0.27,idrotm[620],"ONLY");
- gMC->Gspos("I570",3,"IT56",-27.9743,35.9414,-0.27,idrotm[555],"ONLY");
- gMC->Gspos("I570",4,"IT56",-33.6209,30.9502,-0.27,idrotm[556],"ONLY");
- gMC->Gspos("I570",5,"IT56",-38.1287,24.9108,-0.27,idrotm[557],"ONLY");
- gMC->Gspos("I570",6,"IT56",-41.8487,18.3566,-0.27,idrotm[558],"ONLY");
- gMC->Gspos("I570",7,"IT56",-44.1513,11.1806,-0.27,idrotm[559],"ONLY");
- gMC->Gspos("I570",8,"IT56",-45.5416,3.7737,-0.27,idrotm[560],"ONLY");
- gMC->Gspos("I570",9,"IT56",-45.3894,-3.7611,-0.27,idrotm[561],"ONLY");
- gMC->Gspos("I570",10,"IT56",-44.2994,-11.2181,-0.27,idrotm[562],"ONLY");
- gMC->Gspos("I570",11,"IT56",-41.7089,-18.2952,-0.27,idrotm[563],"ONLY");
- gMC->Gspos("I570",12,"IT56",-38.2566,-24.9943,-0.27,idrotm[564],"ONLY");
- gMC->Gspos("I570",13,"IT56",-33.5086,-30.8468,-0.27,idrotm[565],"ONLY");
- gMC->Gspos("I569",8,"IT56",-43.5484,3.6085,0.0,idrotm[560],"ONLY");
- gMC->Gspos("I569",9,"IT56",-43.3963,-3.5959,0.0,idrotm[561],"ONLY");
- gMC->Gspos("I569",10,"IT56",-42.3606,-10.7271,0.0,idrotm[562],"ONLY");
- gMC->Gspos("I569",11,"IT56",-39.8773,-17.4918,0.0,idrotm[563],"ONLY");
- gMC->Gspos("I569",12,"IT56",-36.5823,-23.9004,0.0,idrotm[564],"ONLY");
- gMC->Gspos("I569",13,"IT56",-32.0371,-29.4922,0.0,idrotm[565],"ONLY");
- gMC->Gspos("I569",14,"IT56",-26.8397,-34.4836,0.0,idrotm[566],"ONLY");
- gMC->Gspos("I569",15,"IT56",-20.7251,-38.2967,0.0,idrotm[567],"ONLY");
- gMC->Gspos("I569",16,"IT56",-14.1886,-41.33,0.0,idrotm[568],"ONLY");
- gMC->Gspos("I569",17,"IT56",-7.1673,-42.9511,0.0,idrotm[569],"ONLY");
- gMC->Gspos("I569",18,"IT56",0.0,-43.6977,0.0,idrotm[533],"ONLY");
- gMC->Gspos("I569",19,"IT56",7.1673,-42.9511,0.0,idrotm[534],"ONLY");
- gMC->Gspos("I569",20,"IT56",14.1886,-41.33,0.0,idrotm[535],"ONLY");
- gMC->Gspos("I569",21,"IT56",20.7251,-38.2967,0.0,idrotm[623],"ONLY");
- gMC->Gspos("I569",22,"IT56",26.8397,-34.4836,0.0,idrotm[537],"ONLY");
- gMC->Gspos("I569",23,"IT56",32.0371,-29.4922,0.0,idrotm[538],"ONLY");
- gMC->Gspos("I569",24,"IT56",36.5822,-23.9004,0.0,idrotm[539],"ONLY");
- gMC->Gspos("I569",25,"IT56",39.8773,-17.4918,0.0,idrotm[540],"ONLY");
- gMC->Gspos("I569",26,"IT56",42.3606,-10.7272,0.0,idrotm[541],"ONLY");
- gMC->Gspos("I569",27,"IT56",43.3963,-3.5959,0.0,idrotm[542],"ONLY");
- gMC->Gspos("I569",28,"IT56",43.5484,3.6085,0.0,idrotm[543],"ONLY");
- gMC->Gspos("I569",29,"IT56",42.2125,10.6897,0.0,idrotm[544],"ONLY");
- gMC->Gspos("I569",30,"IT56",40.0172,17.5532,0.0,idrotm[545],"ONLY");
- gMC->Gspos("I569",31,"IT56",36.4544,23.8169,0.0,idrotm[546],"ONLY");
- gMC->Gspos("I569",32,"IT56",32.1494,29.5956,0.0,idrotm[547],"ONLY");
- gMC->Gspos("I569",33,"IT56",26.7459,34.3631,0.0,idrotm[548],"ONLY");
- gMC->Gspos("I569",34,"IT56",20.7978,38.431,0.0,idrotm[549],"ONLY");
- gMC->Gspos("I569",35,"IT56",14.139,41.1856,0.0,idrotm[550],"ONLY");
- gMC->Gspos("I569",36,"IT56",7.1924,43.1017,0.0,idrotm[551],"ONLY");
- gMC->Gspos("I569",37,"IT56",0.0,43.545,0.0,0,"ONLY");
- gMC->Gspos("I569",38,"IT56",-7.1924,43.1017,0.0,idrotm[552],"ONLY");
- gMC->Gspos("I569",1,"IT56",-14.139,41.1856,0.0,idrotm[553],"ONLY");
- gMC->Gspos("I569",2,"IT56",-20.7978,38.431,0.0,idrotm[620],"ONLY");
- gMC->Gspos("I569",3,"IT56",-26.7459,34.3631,0.0,idrotm[555],"ONLY");
- gMC->Gspos("I569",4,"IT56",-32.1494,29.5956,0.0,idrotm[556],"ONLY");
- gMC->Gspos("I569",5,"IT56",-36.4544,23.8169,0.0,idrotm[557],"ONLY");
- gMC->Gspos("I569",6,"IT56",-40.0172,17.5532,0.0,idrotm[558],"ONLY");
- gMC->Gspos("I569",7,"IT56",-42.2125,10.6897,0.0,idrotm[559],"ONLY");
- gMC->Gspos("I571",15,"IT56",-21.2916,-34.387,0.0,idrotm[501],"ONLY");
- gMC->Gspos("I571",14,"IT56",-27.351,-30.0026,0.0,idrotm[503],"ONLY");
- gMC->Gspos("I571",13,"IT56",-32.2758,-24.3735,0.0,idrotm[504],"ONLY");
- gMC->Gspos("I571",12,"IT56",-36.3422,-18.0963,0.0,idrotm[505],"ONLY");
- gMC->Gspos("I571",11,"IT56",-38.901,-11.0683,0.0,idrotm[506],"ONLY");
- gMC->Gspos("I571",10,"IT56",-40.4252,-3.7459,0.0,idrotm[507],"ONLY");
- gMC->Gspos("I571",9,"IT56",-40.2725,3.7318,0.0,idrotm[508],"ONLY");
- gMC->Gspos("I571",8,"IT56",-39.0486,11.1103,0.0,idrotm[509],"ONLY");
- gMC->Gspos("I571",7,"IT56",-36.2049,18.0279,0.0,idrotm[510],"ONLY");
- gMC->Gspos("I571",6,"IT56",-32.3982,24.466,0.0,idrotm[511],"ONLY");
- gMC->Gspos("I571",5,"IT56",-27.2476,29.8892,0.0,idrotm[512],"ONLY");
- gMC->Gspos("I571",4,"IT56",-21.3723,34.5175,0.0,idrotm[513],"ONLY");
- gMC->Gspos("I571",3,"IT56",-14.6104,37.7138,0.0,idrotm[653],"ONLY");
- gMC->Gspos("I571",2,"IT56",-7.4599,39.9072,0.0,idrotm[514],"ONLY");
- gMC->Gspos("I571",1,"IT56",0.0,40.445,0.0,0,"ONLY");
- gMC->Gspos("I571",34,"IT56",7.46,39.9071,0.0,idrotm[515],"ONLY");
- gMC->Gspos("I571",33,"IT56",14.6104,37.7138,0.0,idrotm[516],"ONLY");
- gMC->Gspos("I571",32,"IT56",21.3723,34.5175,0.0,idrotm[517],"ONLY");
- gMC->Gspos("I571",31,"IT56",27.2476,29.8892,0.0,idrotm[518],"ONLY");
- gMC->Gspos("I571",30,"IT56",32.3983,24.466,0.0,idrotm[519],"ONLY");
- gMC->Gspos("I571",29,"IT56",36.2049,18.0279,0.0,idrotm[520],"ONLY");
- gMC->Gspos("I571",28,"IT56",39.0486,11.1103,0.0,idrotm[521],"ONLY");
- gMC->Gspos("I571",27,"IT56",40.2725,3.7318,0.0,idrotm[522],"ONLY");
- gMC->Gspos("I571",26,"IT56",40.4252,-3.746,0.0,idrotm[523],"ONLY");
- gMC->Gspos("I571",25,"IT56",38.901,-11.0683,0.0,idrotm[524],"ONLY");
- gMC->Gspos("I571",24,"IT56",36.3422,-18.0963,0.0,idrotm[525],"ONLY");
- gMC->Gspos("I571",23,"IT56",32.2758,-24.3736,0.0,idrotm[526],"ONLY");
- gMC->Gspos("I571",22,"IT56",27.351,-30.0026,0.0,idrotm[527],"ONLY");
- gMC->Gspos("I571",21,"IT56",21.2915,-34.387,0.0,idrotm[528],"ONLY");
- gMC->Gspos("I571",20,"IT56",14.6658,-37.8569,0.0,idrotm[618],"ONLY");
- gMC->Gspos("I571",19,"IT56",7.4317,-39.7563,0.0,idrotm[529],"ONLY");
- gMC->Gspos("I571",18,"IT56",0.0,-40.5984,0.0,idrotm[533],"ONLY");
- gMC->Gspos("I571",17,"IT56",-7.4318,-39.7563,0.0,idrotm[530],"ONLY");
- gMC->Gspos("I571",16,"IT56",-14.6659,-37.8569,0.0,idrotm[531],"ONLY");
- gMC->Gspos("I565",13,"IT56",-30.6798,-23.1683,0.0,idrotm[504],"ONLY");
- gMC->Gspos("I565",12,"IT56",-34.5519,-17.2048,0.0,idrotm[505],"ONLY");
- gMC->Gspos("I565",11,"IT56",-36.9774,-10.521,0.0,idrotm[506],"ONLY");
- gMC->Gspos("I565",10,"IT56",-38.4338,-3.5614,0.0,idrotm[507],"ONLY");
- gMC->Gspos("I565",9,"IT56",-38.281,3.5473,0.0,idrotm[508],"ONLY");
- gMC->Gspos("I565",8,"IT56",-37.1249,10.563,0.0,idrotm[509],"ONLY");
- gMC->Gspos("I565",7,"IT56",-34.4146,17.1364,0.0,idrotm[510],"ONLY");
- gMC->Gspos("I565",6,"IT56",-30.8022,23.2608,0.0,idrotm[511],"ONLY");
- gMC->Gspos("I565",5,"IT56",-25.9002,28.4112,0.0,idrotm[512],"ONLY");
- gMC->Gspos("I565",4,"IT56",-20.3195,32.817,0.0,idrotm[513],"ONLY");
- gMC->Gspos("I565",3,"IT56",-13.8879,35.8489,0.0,idrotm[653],"ONLY");
- gMC->Gspos("I565",2,"IT56",-7.0924,37.9412,0.0,idrotm[514],"ONLY");
- gMC->Gspos("I565",1,"IT56",0.0,38.445,0.0,0,"ONLY");
- gMC->Gspos("I565",34,"IT56",7.0925,37.9412,0.0,idrotm[515],"ONLY");
- gMC->Gspos("I565",33,"IT56",13.888,35.8489,0.0,idrotm[516],"ONLY");
- gMC->Gspos("I565",32,"IT56",20.3195,32.817,0.0,idrotm[517],"ONLY");
- gMC->Gspos("I565",31,"IT56",25.9002,28.4112,0.0,idrotm[518],"ONLY");
- gMC->Gspos("I565",30,"IT56",30.8022,23.2607,0.0,idrotm[519],"ONLY");
- gMC->Gspos("I565",29,"IT56",34.4146,17.1364,0.0,idrotm[520],"ONLY");
- gMC->Gspos("I565",28,"IT56",37.125,10.5629,0.0,idrotm[521],"ONLY");
- gMC->Gspos("I565",27,"IT56",38.281,3.5472,0.0,idrotm[522],"ONLY");
- gMC->Gspos("I565",26,"IT56",38.4338,-3.5614,0.0,idrotm[523],"ONLY");
- gMC->Gspos("I565",25,"IT56",36.9774,-10.521,0.0,idrotm[524],"ONLY");
- gMC->Gspos("I565",24,"IT56",34.5519,-17.2048,0.0,idrotm[525],"ONLY");
- gMC->Gspos("I565",23,"IT56",30.6798,-23.1683,0.0,idrotm[526],"ONLY");
- gMC->Gspos("I565",22,"IT56",26.0036,-28.5246,0.0,idrotm[527],"ONLY");
- gMC->Gspos("I565",21,"IT56",20.2387,-32.6866,0.0,idrotm[528],"ONLY");
- gMC->Gspos("I565",20,"IT56",13.9433,-35.992,0.0,idrotm[618],"ONLY");
- gMC->Gspos("I565",19,"IT56",7.0642,-37.7904,0.0,idrotm[529],"ONLY");
- gMC->Gspos("I565",18,"IT56",0.0,-38.5984,0.0,idrotm[533],"ONLY");
- gMC->Gspos("I565",17,"IT56",-7.0643,-37.7904,0.0,idrotm[530],"ONLY");
- gMC->Gspos("I565",16,"IT56",-13.9434,-35.992,0.0,idrotm[531],"ONLY");
- gMC->Gspos("I565",15,"IT56",-20.2387,-32.6866,0.0,idrotm[501],"ONLY");
- gMC->Gspos("I565",14,"IT56",-26.0036,-28.5246,0.0,idrotm[503],"ONLY");
- gMC->Gspos("I553",1,"I570",0.005,0.0,52.8453,0,"ONLY");
- gMC->Gspos("I523",1,"I570",0.0,0.0,46.9203+0.82,0,"ONLY");
- gMC->Gspos("I523",2,"I570",0.0,0.0,43.0103+0.82,0,"ONLY");
- gMC->Gspos("I523",3,"I570",0.0,0.0,39.1003+0.82,0,"ONLY");
- gMC->Gspos("I523",4,"I570",0.0,0.0,35.1903+0.82,0,"ONLY");
- gMC->Gspos("I523",5,"I570",0.0,0.0,31.2803+0.82,0,"ONLY");
- gMC->Gspos("I523",6,"I570",0.0,0.0,27.3703+0.82,0,"ONLY");
- gMC->Gspos("I523",7,"I570",0.0,0.0,23.4603+0.82,0,"ONLY");
- gMC->Gspos("I523",8,"I570",0.0,0.0,19.5503+0.82,0,"ONLY");
- gMC->Gspos("I523",9,"I570",0.0,0.0,15.6403+0.82,0,"ONLY");
- gMC->Gspos("I523",10,"I570",0.0,0.0,11.7303+0.82,0,"ONLY");
- gMC->Gspos("I523",11,"I570",0.0,0.0,7.8203+0.82,0,"ONLY");
- gMC->Gspos("I523",12,"I570",0.0,0.0,3.9103+0.82,0,"ONLY");
- gMC->Gspos("I523",13,"I570",0.0,0.0,0.0003+0.82,0,"ONLY");
- gMC->Gspos("I523",14,"I570",0.0,0.0,-3.9097+0.82,0,"ONLY");
- gMC->Gspos("I523",15,"I570",0.0,0.0,-7.8197+0.82,0,"ONLY");
- gMC->Gspos("I523",16,"I570",0.0,0.0,-11.7297+0.82,0,"ONLY");
- gMC->Gspos("I523",17,"I570",0.0,0.0,-15.6397+0.82,0,"ONLY");
- gMC->Gspos("I523",18,"I570",0.0,0.0,-19.5497+0.82,0,"ONLY");
- gMC->Gspos("I523",19,"I570",0.0,0.0,-23.4597+0.82,0,"ONLY");
- gMC->Gspos("I523",20,"I570",0.0,0.0,-27.3697+0.82,0,"ONLY");
- gMC->Gspos("I523",21,"I570",0.0,0.0,-31.2797+0.82,0,"ONLY");
- gMC->Gspos("I523",22,"I570",0.0,0.0,-35.1897+0.82,0,"ONLY");
- gMC->Gspos("I523",23,"I570",0.0,0.0,-39.0997+0.82,0,"ONLY");
- gMC->Gspos("I523",24,"I570",0.0,0.0,-43.0097+0.82,0,"ONLY");
- gMC->Gspos("I523",25,"I570",0.0,0.0,-46.9197+0.82,0,"ONLY");
- gMC->Gspos("I553",2,"I570",-0.005,0.0,-51.2047,idrotm[570],"ONLY");
- gMC->Gspos("I566",1,"I569",0.0,-0.03,46.9203,idrotm[532],"ONLY");
- gMC->Gspos("I566",2,"I569",0.0,0.03,43.0103,0,"ONLY");
- gMC->Gspos("I566",3,"I569",0.0,-0.03,39.1003,idrotm[532],"ONLY");
- gMC->Gspos("I566",4,"I569",0.0,0.03,35.1903,0,"ONLY");
- gMC->Gspos("I566",5,"I569",0.0,-0.03,31.2803,idrotm[532],"ONLY");
- gMC->Gspos("I566",6,"I569",0.0,0.03,27.3703,0,"ONLY");
- gMC->Gspos("I566",7,"I569",0.0,-0.03,23.4603,idrotm[532],"ONLY");
- gMC->Gspos("I566",8,"I569",0.0,0.03,19.5503,0,"ONLY");
- gMC->Gspos("I566",9,"I569",0.0,-0.03,15.6403,idrotm[532],"ONLY");
- gMC->Gspos("I566",10,"I569",0.0,0.03,11.7303,0,"ONLY");
- gMC->Gspos("I566",11,"I569",0.0,-0.03,7.8203,idrotm[532],"ONLY");
- gMC->Gspos("I566",12,"I569",0.0,0.03,3.9103,0,"ONLY");
- gMC->Gspos("I566",13,"I569",0.0,-0.03,0.0003,0,"ONLY");
- gMC->Gspos("I566",14,"I569",0.0,0.03,-3.9097,0,"ONLY");
- gMC->Gspos("I566",15,"I569",0.0,-0.03,-7.8197,idrotm[532],"ONLY");
- gMC->Gspos("I566",16,"I569",0.0,0.03,-11.7297,0,"ONLY");
- gMC->Gspos("I566",17,"I569",0.0,-0.03,-15.6397,0,"ONLY");
- gMC->Gspos("I566",18,"I569",0.0,0.03,-19.5497,0,"ONLY");
- gMC->Gspos("I566",19,"I569",0.0,-0.03,-23.4597,idrotm[532],"ONLY");
- gMC->Gspos("I566",20,"I569",0.0,0.03,-27.3697,0,"ONLY");
- gMC->Gspos("I566",21,"I569",0.0,-0.03,-31.2797,idrotm[532],"ONLY");
- gMC->Gspos("I566",22,"I569",0.0,0.03,-35.1897,0,"ONLY");
- gMC->Gspos("I566",23,"I569",0.0,-0.03,-39.0997,0,"ONLY");
- gMC->Gspos("I566",24,"I569",0.0,0.03,-43.0097,0,"ONLY");
- gMC->Gspos("I566",25,"I569",0.0,-0.03,-46.9197,idrotm[532],"ONLY");
- gMC->Gspos("I544",1,"I571",0.0101,0.0,43.125,0,"ONLY");
- gMC->Gspos("I516",20,"I571",0.0001,0.0,39.1-1.08,0,"ONLY");
- gMC->Gspos("I516",19,"I571",0.0001,0.0,35.19-1.08,0,"ONLY");
- gMC->Gspos("I516",18,"I571",0.0001,0.0,31.28-1.08,0,"ONLY");
- gMC->Gspos("I516",17,"I571",0.0001,0.0,27.37-1.08,0,"ONLY");
- gMC->Gspos("I516",16,"I571",0.0001,0.0,23.46-1.08,0,"ONLY");
- gMC->Gspos("I516",15,"I571",0.0001,0.0,19.55-1.08,0,"ONLY");
- gMC->Gspos("I516",14,"I571",0.0001,0.0,15.64-1.08,0,"ONLY");
- gMC->Gspos("I516",13,"I571",0.0001,0.0,11.73-1.08,0,"ONLY");
- gMC->Gspos("I516",12,"I571",0.0001,0.0,7.82-1.08,0,"ONLY");
- gMC->Gspos("I516",11,"I571",0.0001,0.0,3.91-1.08,0,"ONLY");
- gMC->Gspos("I516",10,"I571",0.0001,0.0,0.0-1.08,0,"ONLY");
- gMC->Gspos("I516",9,"I571",0.0001,0.0,-3.91-1.08,0,"ONLY");
- gMC->Gspos("I516",8,"I571",0.0001,0.0,-7.82-1.08,0,"ONLY");
- gMC->Gspos("I516",7,"I571",0.0001,0.0,-11.73-1.08,0,"ONLY");
- gMC->Gspos("I516",6,"I571",0.0001,0.0,-15.64-1.08,0,"ONLY");
- gMC->Gspos("I516",5,"I571",0.0001,0.0,-19.55-1.08,0,"ONLY");
- gMC->Gspos("I516",4,"I571",0.0001,0.0,-23.46-1.08,0,"ONLY");
- gMC->Gspos("I516",3,"I571",0.0001,0.0,-27.37-1.08,0,"ONLY");
- gMC->Gspos("I516",2,"I571",0.0001,0.0,-31.28-1.08,0,"ONLY");
- gMC->Gspos("I516",1,"I571",0.0001,0.0,-35.19-1.08,0,"ONLY");
- gMC->Gspos("I544",2,"I571",-0.0099,0.0,-41.375,idrotm[570],"ONLY");
- gMC->Gspos("I562",1,"I565",0.0,0.03,41.1546,0,"ONLY");
- gMC->Gspos("I562",2,"I565",0.0,-0.03,37.2246,0,"ONLY");
- gMC->Gspos("I562",3,"I565",0.0,0.03,33.3146,0,"ONLY");
- gMC->Gspos("I562",4,"I565",0.0,-0.03,29.3846,0,"ONLY");
- gMC->Gspos("I562",5,"I565",0.0,0.03,25.4746,0,"ONLY");
- gMC->Gspos("I562",6,"I565",0.0,-0.03,21.5446,0,"ONLY");
- gMC->Gspos("I562",7,"I565",0.0,0.03,17.6346,0,"ONLY");
- gMC->Gspos("I562",8,"I565",0.0,-0.03,13.7046,0,"ONLY");
- gMC->Gspos("I562",9,"I565",0.0,0.03,9.7946,0,"ONLY");
- gMC->Gspos("I562",10,"I565",0.0,-0.03,5.8645,0,"ONLY");
- gMC->Gspos("I562",11,"I565",0.0,0.03,1.9546,0,"ONLY");
- gMC->Gspos("I562",12,"I565",0.0,-0.03,-1.9754,0,"ONLY");
- gMC->Gspos("I562",13,"I565",0.0,0.03,-5.8855,0,"ONLY");
- gMC->Gspos("I562",14,"I565",0.0,-0.03,-9.8154,0,"ONLY");
- gMC->Gspos("I562",15,"I565",0.0,0.03,-13.7254,0,"ONLY");
- gMC->Gspos("I562",16,"I565",0.0,-0.03,-17.6555,0,"ONLY");
- gMC->Gspos("I562",17,"I565",0.0,0.03,-21.5655,0,"ONLY");
- gMC->Gspos("I562",18,"I565",0.0,-0.03,-25.4954,0,"ONLY");
- gMC->Gspos("I562",19,"I565",0.0,0.03,-29.4054,0,"ONLY");
- gMC->Gspos("I562",20,"I565",0.0,-0.03,-33.3354,0,"ONLY");
- gMC->Gspos("I562",21,"I565",0.0,0.03,-37.2454,0,"ONLY");
- gMC->Gspos("I562",22,"I565",0.0,-0.03,-41.1554,0,"ONLY");
- gMC->Gspos("I559",1,"I553",2.25,-1.615,0.0,0,"ONLY");
- gMC->Gspos("I560",1,"I553",2.25,-1.615,0.0,0,"ONLY");
- gMC->Gspos("I560",2,"I553",-2.25,-1.615,0.0,idrotm[573],"ONLY");
- gMC->Gspos("I558",1,"I553",-1.7167,-1.52,0.0,idrotm[583],"ONLY");
- gMC->Gspos("I557",1,"I553",-1.8533,-1.341,0.0,idrotm[581],"ONLY");
- gMC->Gspos("I558",2,"I553",1.8367,-1.3122,0.0,idrotm[575],"ONLY");
- gMC->Gspos("I557",2,"I553",1.75,-1.52,0.0,idrotm[583],"ONLY");
- gMC->Gspos("I558",3,"I553",-0.12,1.6613,0.0,idrotm[581],"ONLY");
- gMC->Gspos("I557",3,"I553",0.1034,1.6901,0.0,idrotm[575],"ONLY");
- gMC->Gspos("I556",3,"I553",-1.031,0.2033,-2.203,idrotm[580],"ONLY");
- gMC->Gspos("I556",1,"I553",1.0311,0.2033,-0.287,idrotm[576],"ONLY");
- gMC->Gspos("I554",1,"I553",0.0,-1.58,0.71,0,"ONLY");
- gMC->Gspos("I555",1,"I553",-0.0072,-1.58,-1.2311,idrotm[633],"ONLY");
- gMC->Gspos("I556",2,"I553",1.0311,0.2033,-2.203,idrotm[577],"ONLY");
- gMC->Gspos("I556",4,"I553",-1.031,0.2033,-0.287,idrotm[579],"ONLY");
- gMC->Gspos("I559",2,"I553",-2.25,-1.615,0.0,idrotm[573],"ONLY");
-
- gMC->Gspos("I561",1,"I553",2.1,-1.615,-0.24,0,"ONLY");
- gMC->Gspos("I561",2,"I553",-2.1,-1.615,-0.24,idrotm[573],"ONLY");
-
- gMC->Gspos("I519",37,"I523",0.0001,-1.79,-0.99,idrotm[586],"ONLY");
- gMC->Gspos("I519",36,"I523",-3.2986,-1.79,-1.2943,0,"ONLY");
- gMC->Gspos("I519",35,"I523",-3.2986,-1.71,-1.2943,0,"ONLY");
- gMC->Gspos("I519",34,"I523",-3.2286,-1.71,-1.2943,0,"ONLY");
- gMC->Gspos("I519",33,"I523",-3.2286,-1.79,-1.2943,0,"ONLY");
- gMC->Gspos("I519",32,"I523",-3.1586,-1.79,-1.2943,0,"ONLY");
- gMC->Gspos("I519",31,"I523",-3.1586,-1.71,-1.2943,0,"ONLY");
- gMC->Gspos("I519",30,"I523",-1.3436,-1.71,-1.2943,0,"ONLY");
- gMC->Gspos("I519",29,"I523",-1.3436,-1.79,-1.2943,0,"ONLY");
- gMC->Gspos("I519",28,"I523",-1.2736,-1.79,-1.2943,0,"ONLY");
- gMC->Gspos("I519",27,"I523",-1.2736,-1.71,-1.2943,0,"ONLY");
- gMC->Gspos("I519",26,"I523",-1.2036,-1.71,-1.2943,0,"ONLY");
- gMC->Gspos("I519",25,"I523",-1.2036,-1.79,-1.2943,0,"ONLY");
- gMC->Gspos("I519",24,"I523",-1.0458,-1.79,-1.2943,0,"ONLY");
- gMC->Gspos("I519",23,"I523",-1.0458,-1.71,-1.2943,0,"ONLY");
- gMC->Gspos("I519",22,"I523",-0.9758,-1.71,-1.2943,0,"ONLY");
- gMC->Gspos("I519",21,"I523",-0.9758,-1.79,-1.2943,0,"ONLY");
- gMC->Gspos("I519",20,"I523",-0.9058,-1.79,-1.2943,0,"ONLY");
- gMC->Gspos("I519",19,"I523",-0.9058,-1.71,-1.2943,0,"ONLY");
- gMC->Gspos("I519",18,"I523",0.9092,-1.71,-1.2943,0,"ONLY");
- gMC->Gspos("I519",17,"I523",0.9092,-1.79,-1.2943,0,"ONLY");
- gMC->Gspos("I519",16,"I523",0.9792,-1.79,-1.2943,0,"ONLY");
- gMC->Gspos("I519",15,"I523",0.9792,-1.71,-1.2943,0,"ONLY");
- gMC->Gspos("I519",14,"I523",1.0492,-1.71,-1.2943,0,"ONLY");
- gMC->Gspos("I519",13,"I523",1.0492,-1.79,-1.2943,0,"ONLY");
- gMC->Gspos("I519",12,"I523",1.207,-1.79,-1.2943,0,"ONLY");
- gMC->Gspos("I519",11,"I523",1.207,-1.71,-1.2943,0,"ONLY");
- gMC->Gspos("I519",10,"I523",1.277,-1.71,-1.2943,0,"ONLY");
- gMC->Gspos("I519",9,"I523",1.277,-1.79,-1.2943,0,"ONLY");
- gMC->Gspos("I519",8,"I523",1.347,-1.79,-1.2943,0,"ONLY");
- gMC->Gspos("I519",7,"I523",1.347,-1.71,-1.2943,0,"ONLY");
- gMC->Gspos("I519",6,"I523",3.162,-1.71,-1.2943,0,"ONLY");
- gMC->Gspos("I519",5,"I523",3.162,-1.79,-1.2943,0,"ONLY");
- gMC->Gspos("I519",4,"I523",3.232,-1.79,-1.2943,0,"ONLY");
- gMC->Gspos("I519",3,"I523",3.232,-1.71,-1.2943,0,"ONLY");
- gMC->Gspos("I521",12,"I523",-2.8209,-1.7925,-0.982,0,"ONLY");
- gMC->Gspos("I521",11,"I523",-1.6895,-1.7925,-0.982,0,"ONLY");
- gMC->Gspos("I521",10,"I523",-0.5631,-1.7925,-0.982,0,"ONLY");
- gMC->Gspos("I521",9,"I523",0.5633,-1.7925,-0.982,0,"ONLY");
- gMC->Gspos("I521",8,"I523",1.6861,-1.7925,-0.982,0,"ONLY");
- gMC->Gspos("I521",7,"I523",2.8161,-1.7925,-0.982,0,"ONLY");
- gMC->Gspos("I519",2,"I523",3.302,-1.79,-1.2943,0,"ONLY");
- gMC->Gspos("I520",3,"I523",0.0001,-1.845,-1.19,0,"ONLY");
- gMC->Gspos("I520",2,"I523",-2.2499,-1.845,-1.19,0,"ONLY");
- gMC->Gspos("I521",6,"I523",-2.8209,-1.7075,-0.982,0,"ONLY");
- gMC->Gspos("I521",5,"I523",-1.6895,-1.7075,-0.982,0,"ONLY");
- gMC->Gspos("I521",4,"I523",-0.5631,-1.7075,-0.982,0,"ONLY");
- gMC->Gspos("I521",3,"I523",0.5633,-1.7075,-0.982,0,"ONLY");
- gMC->Gspos("I521",2,"I523",1.6861,-1.7075,-0.982,0,"ONLY");
- gMC->Gspos("I518",1,"I523",0.0001,-1.75,-1.065,0,"ONLY");
- gMC->Gspos("I519",1,"I523",3.302,-1.71,-1.2943,0,"ONLY");
- gMC->Gspos("I520",1,"I523",2.2501,-1.845,-1.19,0,"ONLY");
- gMC->Gspos("I521",1,"I523",2.8161,-1.7075,-0.982,0,"ONLY");
-
- gMC->Gspos("I522",1,"I523",2.2501,-1.655,-1.3,idrotm[583],"ONLY");
- gMC->Gspos("I522",2,"I523",-2.2499,-1.655,-1.3,idrotm[583],"ONLY");
-
- gMC->Gspos("I542",2,"I523",-2.2499,-1.615,0.0,idrotm[573],"ONLY");
- gMC->Gspos("I541",2,"I523",-2.2499,-1.615,0.0,idrotm[573],"ONLY");
- gMC->Gspos("I541",1,"I523",2.2501,-1.615,0.0,0,"ONLY");
- gMC->Gspos("I542",1,"I523",2.2501,-1.615,0.0,0,"ONLY");
- gMC->Gspos("I543",1,"I523",2.1001,-1.615,0.955,0,"ONLY");
- gMC->Gspos("I543",2,"I523",-2.0999,-1.615,0.955,idrotm[573],"MANY");
- gMC->Gspos("I537",2,"I523",1.7501,-1.52,0.0,idrotm[583],"ONLY");
- gMC->Gspos("I538",2,"I523",1.8368,-1.3122,0.0,idrotm[575],"ONLY");
- gMC->Gspos("I537",3,"I523",0.1035,1.6901,0.0,idrotm[575],"ONLY");
- gMC->Gspos("I538",3,"I523",-0.1199,1.6612,0.0,idrotm[581],"ONLY");
- gMC->Gspos("I538",1,"I523",-1.7166,-1.52,0.0,idrotm[583],"ONLY");
- gMC->Gspos("I537",1,"I523",-1.8532,-1.341,0.0,idrotm[581],"ONLY");
- gMC->Gspos("I536",3,"I523",-1.031,0.2033,-1.008,idrotm[580],"ONLY");
- gMC->Gspos("I536",4,"I523",-1.031,0.2033,0.908,idrotm[579],"ONLY");
- gMC->Gspos("I535",1,"I523",-0.0072,-1.58,-0.0361,idrotm[633],"ONLY");
- gMC->Gspos("I536",2,"I523",1.0312,0.2033,-1.008,idrotm[577],"ONLY");
- gMC->Gspos("I536",1,"I523",1.0312,0.2033,0.908,idrotm[576],"ONLY");
- gMC->Gspos("I534",1,"I523",0.0001,-1.58,1.905,0,"ONLY");
- gMC->Gspos("I540",1,"I523",0.0001,-1.785,1.905,idrotm[571],"ONLY");
- gMC->Gspos("I539",1,"I523",1.8001,-1.75,-0.195,idrotm[571],"ONLY");
- gMC->Gspos("I539",2,"I523",-1.7999,-1.75,-0.195,idrotm[572],"ONLY");
- gMC->Gspos("ITS6",1,"I566",0.0,0.0,0.0,0,"ONLY");
- gMC->Gspos("I550",1,"I544",2.25,-1.615,0.0,0,"ONLY");
- gMC->Gspos("I551",1,"I544",2.25,-1.615,0.0,0,"ONLY");
- gMC->Gspos("I551",2,"I544",-2.25,-1.615,0.0,idrotm[573],"ONLY");
- gMC->Gspos("I550",2,"I544",-2.25,-1.615,0.0,idrotm[573],"ONLY");
- gMC->Gspos("I549",1,"I544",1.7167,-1.52,0.0,idrotm[583],"ONLY");
- gMC->Gspos("I548",1,"I544",1.8533,-1.341,0.0,idrotm[575],"ONLY");
- gMC->Gspos("I547",1,"I544",1.0311,0.2033,-0.287,idrotm[576],"ONLY");
- gMC->Gspos("I545",1,"I544",0.0,-1.58,0.71,0,"ONLY");
- gMC->Gspos("I547",2,"I544",1.0311,0.2033,-2.203,idrotm[577],"ONLY");
- gMC->Gspos("I546",1,"I544",-0.0073,-1.58,-1.2311,idrotm[633],"ONLY");
- gMC->Gspos("I547",4,"I544",-1.0311,0.2033,-0.287,idrotm[579],"ONLY");
- gMC->Gspos("I547",3,"I544",-1.0311,0.2033,-2.203,idrotm[580],"ONLY");
- gMC->Gspos("I548",2,"I544",-0.1033,1.6901,0.0,idrotm[581],"O]NLY");
- gMC->Gspos("I549",2,"I544",0.12,1.6613,0.0,idrotm[575],"ONLY");
- gMC->Gspos("I549",3,"I544",-1.8367,-1.3122,0.0,idrotm[581],"ONLY");
- gMC->Gspos("I548",3,"I544",-1.75,-1.52,0.0,idrotm[583],"ONLY");
-
- gMC->Gspos("I552",1,"I544",2.1,-1.615,-0.24,0,"ONLY");
- gMC->Gspos("I552",2,"I544",-2.1,-1.615,-0.24,idrotm[573],"ONLY");
-
- gMC->Gspos("I515",12,"I516",-1.6896,-1.7075,-0.9822,0,"ONLY");
- gMC->Gspos("I515",11,"I516",-1.6896,-1.7925,-0.9822,0,"ONLY");
- gMC->Gspos("I513",37,"I516",0.0,-1.79,-1.035,idrotm[586],"ONLY");
- gMC->Gspos("I513",1,"I516",-3.2987,-1.71,-1.2943,0,"ONLY");
- gMC->Gspos("I515",1,"I516",-2.816,-1.7075,-0.9822,0,"ONLY");
- gMC->Gspos("I514",1,"I516",-2.25,-1.845,-1.19,0,"ONLY");
- gMC->Gspos("I514",2,"I516",0.0,-1.845,-1.19,0,"ONLY");
- gMC->Gspos("I514",3,"I516",2.25,-1.845,-1.19,0,"ONLY");
- gMC->Gspos("I515",2,"I516",-2.816,-1.7925,-0.9822,0,"ONLY");
- gMC->Gspos("I513",2,"I516",-3.2987,-1.79,-1.2943,0,"ONLY");
- gMC->Gspos("I515",3,"I516",-0.5632,-1.7075,-0.9822,0,"ONLY");
- gMC->Gspos("I515",4,"I516",-0.5632,-1.7925,-0.9822,0,"ONLY");
- gMC->Gspos("I515",5,"I516",0.5632,-1.7925,-0.9822,0,"ONLY");
- gMC->Gspos("I515",6,"I516",0.5632,-1.7075,-0.9822,0,"ONLY");
- gMC->Gspos("I515",7,"I516",1.6896,-1.7075,-0.9822,0,"ONLY");
- gMC->Gspos("I515",8,"I516",1.6896,-1.7925,-0.9822,0,"ONLY");
- gMC->Gspos("I515",9,"I516",2.816,-1.7925,-0.9822,0,"ONLY");
- gMC->Gspos("I515",10,"I516",2.816,-1.7075,-0.9822,0,"ONLY");
- gMC->Gspos("I513",3,"I516",-3.2287,-1.79,-1.2943,0,"ONLY");
- gMC->Gspos("I513",4,"I516",-3.2287,-1.71,-1.2943,0,"ONLY");
- gMC->Gspos("I513",5,"I516",-3.1587,-1.71,-1.2943,0,"ONLY");
- gMC->Gspos("I513",6,"I516",-3.1587,-1.79,-1.2943,0,"ONLY");
- gMC->Gspos("I513",7,"I516",-1.3437,-1.79,-1.2943,0,"ONLY");
- gMC->Gspos("I513",8,"I516",-1.3437,-1.71,-1.2943,0,"ONLY");
- gMC->Gspos("I513",9,"I516",-1.2737,-1.71,-1.2943,0,"ONLY");
- gMC->Gspos("I513",10,"I516",-1.2737,-1.79,-1.2943,0,"ONLY");
- gMC->Gspos("I513",11,"I516",-1.2037,-1.79,-1.2943,0,"ONLY");
- gMC->Gspos("I513",12,"I516",-1.2037,-1.71,-1.2943,0,"ONLY");
- gMC->Gspos("I513",13,"I516",-1.046,-1.71,-1.2943,0,"ONLY");
- gMC->Gspos("I513",14,"I516",-1.046,-1.79,-1.2943,0,"ONLY");
- gMC->Gspos("I513",15,"I516",-0.976,-1.79,-1.2943,0,"ONLY");
- gMC->Gspos("I513",16,"I516",-0.976,-1.71,-1.2943,0,"ONLY");
- gMC->Gspos("I513",17,"I516",-0.906,-1.71,-1.2943,0,"ONLY");
- gMC->Gspos("I513",18,"I516",-0.906,-1.79,-1.2943,0,"ONLY");
- gMC->Gspos("I513",19,"I516",0.9091,-1.79,-1.2943,0,"ONLY");
- gMC->Gspos("I513",20,"I516",0.9091,-1.71,-1.2943,0,"ONLY");
- gMC->Gspos("I513",21,"I516",0.9791,-1.71,-1.2943,0,"ONLY");
- gMC->Gspos("I513",22,"I516",0.9791,-1.79,-1.2943,0,"ONLY");
- gMC->Gspos("I513",23,"I516",1.0491,-1.79,-1.2943,0,"ONLY");
- gMC->Gspos("I513",24,"I516",1.0491,-1.71,-1.2943,0,"ONLY");
- gMC->Gspos("I513",25,"I516",1.2068,-1.71,-1.2943,0,"ONLY");
- gMC->Gspos("I513",26,"I516",1.2068,-1.79,-1.2943,0,"ONLY");
- gMC->Gspos("I513",27,"I516",1.2768,-1.79,-1.2943,0,"ONLY");
- gMC->Gspos("I513",28,"I516",1.2768,-1.71,-1.2943,0,"ONLY");
- gMC->Gspos("I513",29,"I516",1.3469,-1.71,-1.2943,0,"ONLY");
- gMC->Gspos("I513",30,"I516",1.3469,-1.79,-1.2943,0,"ONLY");
- gMC->Gspos("I513",31,"I516",3.1619,-1.79,-1.2943,0,"ONLY");
- gMC->Gspos("I513",32,"I516",3.1619,-1.71,-1.2943,0,"ONLY");
- gMC->Gspos("I513",33,"I516",3.2319,-1.71,-1.2943,0,"ONLY");
- gMC->Gspos("I513",34,"I516",3.2319,-1.79,-1.2943,0,"ONLY");
- gMC->Gspos("I513",35,"I516",3.3019,-1.79,-1.2943,0,"ONLY");
- gMC->Gspos("I513",36,"I516",3.3019,-1.71,-1.2943,0,"ONLY");
- gMC->Gspos("I512",1,"I516",0.0,-1.75,-1.065,0,"ONLY");
- gMC->Gspos("I528",1,"I516",1.7167,-1.52,0.0,idrotm[583],"ONLY");
- gMC->Gspos("I527",1,"I516",1.8534,-1.341,0.0,idrotm[575],"ONLY");
- gMC->Gspos("I528",2,"I516",0.12,1.6613,0.0,idrotm[575],"ONLY");
- gMC->Gspos("I527",2,"I516",-0.1033,1.6901,0.0,idrotm[581],"ONLY");
- gMC->Gspos("I527",3,"I516",-1.75,-1.52,0.0,idrotm[583],"ONLY");
- gMC->Gspos("I528",3,"I516",-1.8367,-1.3122,0.0,idrotm[581],"ONLY");
- gMC->Gspos("I526",2,"I516",1.0311,0.2033,-1.008,idrotm[577],"ONLY");
- gMC->Gspos("I525",1,"I516",-0.0073,-1.58,-0.0361,idrotm[633],"ONLY");
- gMC->Gspos("I524",1,"I516",0.0,-1.58,1.905,0,"ONLY");
- gMC->Gspos("I526",1,"I516",1.0311,0.2033,0.908,idrotm[576],"ONLY");
- gMC->Gspos("I526",3,"I516",-1.0311,0.2033,0.908,idrotm[579],"ONLY");
- gMC->Gspos("I526",4,"I516",-1.0311,0.2033,-1.008,idrotm[580],"ONLY");
- gMC->Gspos("I529",1,"I516",1.8,-1.75,-0.195,idrotm[571],"ONLY");
- gMC->Gspos("I530",1,"I516",0.0,-1.785,1.905,idrotm[571],"ONLY");
- gMC->Gspos("I529",2,"I516",-1.8,-1.75,-0.195,idrotm[572],"ONLY");
-
- gMC->Gspos("I517",1,"I516",2.25,-1.655,-1.3,idrotm[583],"ONLY");
- gMC->Gspos("I517",2,"I516",-2.25,-1.655,-1.3,idrotm[584],"ONLY");
-
- gMC->Gspos("I531",2,"I516",-2.25,-1.615,0.0,idrotm[573],"ONLY");
- gMC->Gspos("I531",1,"I516",2.25,-1.615,0.0,0,"ONLY");
- gMC->Gspos("I532",1,"I516",2.25,-1.615,0.0,0,"ONLY");
- gMC->Gspos("I532",2,"I516",-2.25,-1.615,0.0,idrotm[573],"ONLY");
- gMC->Gspos("I533",1,"I516",2.1,-1.615,0.955,0,"ONLY");
- gMC->Gspos("I533",2,"I516",-2.1,-1.615,0.955,idrotm[573],"MANY");
- gMC->Gspos("ITS5",1,"I562",0.0,0.0,0.0,0,"ONLY");
- }
-
- // --- Place volumes of shield between SPD and SDD
-
- if (! AliITSInitGeometry::SPDshieldIsTGeoNative()) {
- gMC->Gspos("IC01",1,"ITSD",0.0,0.0,0.0,0,"ONLY");
- gMC->Gspos("IC02",1,"ITSD",0.0,0.0,25.+8.75,0,"ONLY");
- gMC->Gspos("IC02",2,"ITSD",0.0,0.0,-25.-8.75,idrotm[200],"ONLY");
- //gMC->Gspos("IC03",1,"ITSD",0.0,0.0,25.+17.5+7.875,0,"ONLY");
- //gMC->Gspos("IC03",2,"ITSD",0.0,0.0,-25.-17.5-7.875,idrotm[200],"ONLY");
- }
-
- // --- Place volumes of cylinders between SPD and SDD and SDD and SSD
- if (! AliITSInitGeometry::SDDconeIsTGeoNative()) {
- gMC->Gspos("ICY1",1,"IS02",0.0,0.0,0.,0,"ONLY");
- gMC->Gspos("ICY2",1,"IS01",0.0,0.0,0.,0,"ONLY");
- gMC->Gspos("ICY3",1,"IS01",0.0,0.0,0.,0,"ONLY");
- gMC->Gspos("ICY4",1,"IS01",0.0,0.0,0.,0,"ONLY");
-
- // --- Place volumes of SDD cone ----------------------------------
-
- gMC->Gspos("I093",1,"IS02",0.0,0.0,0.0,0,"ONLY");
- gMC->Gspos("I093",2,"IS02",0.0,0.0,0.0,idrotm[856],"ONLY");
- gMC->Gspos("I099",4,"IS02",0.0,0.0,0.0,idrotm[857],"ONLY");
- gMC->Gspos("I099",3,"IS02",0.0,0.0,0.0,idrotm[858],"ONLY");
- gMC->Gspos("I099",5,"IS02",0.0,0.0,0.0,idrotm[859],"ONLY");
- gMC->Gspos("I099",6,"IS02",0.0,0.0,0.0,idrotm[860],"ONLY");
- gMC->Gspos("I099",7,"IS02",0.0,0.0,0.0,idrotm[861],"ONLY");
- gMC->Gspos("I099",2,"IS02",0.0,0.0,0.0,idrotm[862],"ONLY");
- gMC->Gspos("I200",4,"IS02",0.0,0.0,0.0,idrotm[863],"ONLY");
- gMC->Gspos("I200",3,"IS02",0.0,0.0,0.0,idrotm[864],"ONLY");
- gMC->Gspos("I200",2,"IS02",0.0,0.0,0.0,idrotm[865],"ONLY");
- gMC->Gspos("I200",13,"IS02",0.0,0.0,0.0,idrotm[867],"ONLY");
- gMC->Gspos("I200",12,"IS02",0.0,0.0,0.0,idrotm[869],"ONLY");
- gMC->Gspos("I200",11,"IS02",0.0,0.0,0.0,idrotm[870],"ONLY");
- gMC->Gspos("I200",10,"IS02",0.0,0.0,0.0,idrotm[871],"ONLY");
- gMC->Gspos("I200",9,"IS02",0.0,0.0,0.0,idrotm[872],"ONLY");
- gMC->Gspos("I200",8,"IS02",0.0,0.0,0.0,idrotm[873],"ONLY");
- gMC->Gspos("I200",7,"IS02",0.0,0.0,0.0,idrotm[874],"ONLY");
- gMC->Gspos("I200",6,"IS02",0.0,0.0,0.0,idrotm[875],"ONLY");
- gMC->Gspos("I200",5,"IS02",0.0,0.0,0.0,idrotm[876],"ONLY");
- gMC->Gspos("I090",2,"IS02",0.0,0.0,-39.4,0,"ONLY");
- gMC->Gspos("I090",1,"IS02",0.0,0.0,39.4,idrotm[856],"ONLY");
- gMC->Gspos("I099",9,"IS02",0.0,0.0,0.0,idrotm[877],"ONLY");
- gMC->Gspos("I099",8,"IS02",0.0,0.0,0.0,idrotm[879],"ONLY");
- gMC->Gspos("I099",1,"IS02",0.0,0.0,0.0,idrotm[880],"ONLY");
- gMC->Gspos("I099",12,"IS02",0.0,0.0,0.0,idrotm[881],"ONLY");
- gMC->Gspos("I099",11,"IS02",0.0,0.0,0.0,idrotm[851],"ONLY");
- gMC->Gspos("I099",10,"IS02",0.0,0.0,0.0,idrotm[882],"ONLY");
- gMC->Gspos("I200",23,"IS02",0.0,0.0,0.0,idrotm[898],"ONLY");
- gMC->Gspos("I200",24,"IS02",0.0,0.0,0.0,idrotm[883],"ONLY");
- gMC->Gspos("I200",1,"IS02",0.0,0.0,0.0,idrotm[884],"ONLY");
- gMC->Gspos("I200",14,"IS02",0.0,0.0,0.0,idrotm[885],"ONLY");
- gMC->Gspos("I200",15,"IS02",0.0,0.0,0.0,idrotm[887],"ONLY");
- gMC->Gspos("I200",16,"IS02",0.0,0.0,0.0,idrotm[888],"ONLY");
- gMC->Gspos("I200",17,"IS02",0.0,0.0,0.0,idrotm[889],"ONLY");
- gMC->Gspos("I200",18,"IS02",0.0,0.0,0.0,idrotm[890],"ONLY");
- gMC->Gspos("I200",22,"IS02",0.0,0.0,0.0,idrotm[891],"ONLY");
- gMC->Gspos("I200",21,"IS02",0.0,0.0,0.0,idrotm[892],"ONLY");
- gMC->Gspos("I200",20,"IS02",0.0,0.0,0.0,idrotm[868],"ONLY");
- gMC->Gspos("I200",19,"IS02",0.0,0.0,0.0,idrotm[893],"ONLY");
-
- gMC->Gspos("I098",1,"IS02",0.0,0.0,33.6,0,"ONLY");
- gMC->Gspos("I097",1,"IS02",0.0,0.0,26.6,0,"ONLY");
- gMC->Gspos("I097",2,"IS02",0.0,0.0,-26.6,idrotm[856],"ONLY");
- gMC->Gspos("I098",2,"IS02",0.0,0.0,-33.6,idrotm[856],"ONLY");
-
- gMC->Gspos("I202",1,"IS02",12.1,0.0,33.84,0,"ONLY");
- gMC->Gspos("I202",6,"IS02",-6.05,-10.4789,33.84,idrotm[930],"ONLY");
- gMC->Gspos("I202",5,"IS02",-6.05,10.4789,33.84,idrotm[929],"ONLY");
- gMC->Gspos("I202",2,"IS02",12.1,0.0,-33.84,idrotm[856],"ONLY");
- gMC->Gspos("I202",3,"IS02",-6.05,10.4789,-33.84,idrotm[932],"ONLY");
- gMC->Gspos("I202",4,"IS02",-6.05,-10.4789,-33.84,idrotm[934],"ONLY");
- gMC->Gspos("I203",12,"IS02",21.8453,0.0,-42.24,idrotm[856],"ONLY");
- gMC->Gspos("I203",11,"IS02",10.9227,-18.9186,-42.24,idrotm[935],"ONLY");
- gMC->Gspos("I203",10,"IS02",10.9227,-18.9186,42.24,idrotm[846],"ONLY");
- gMC->Gspos("I203",9,"IS02",-10.9227,-18.9186,-42.24,idrotm[934],"ONLY");
- gMC->Gspos("I203",8,"IS02",-10.9227,-18.9186,42.24,idrotm[930],"ONLY");
- gMC->Gspos("I203",7,"IS02",-21.8453,0.0,-42.24,idrotm[933],"ONLY");
- gMC->Gspos("I203",6,"IS02",-21.8453,0.0,42.24,idrotm[878],"ONLY");
- gMC->Gspos("I203",5,"IS02",-10.9227,18.9186,-42.24,idrotm[932],"ONLY");
- gMC->Gspos("I203",4,"IS02",-10.9227,18.9186,42.24,idrotm[929],"ONLY");
- gMC->Gspos("I203",3,"IS02",10.9227,18.9186,-42.24,idrotm[931],"ONLY");
- gMC->Gspos("I203",2,"IS02",10.9227,18.9186,42.24,idrotm[853],"ONLY");
- gMC->Gspos("I203",1,"IS02",21.8453,0.0,42.24,0,"ONLY");
- gMC->Gspos("I095",1,"I098",0.0,0.0,0.0,0,"ONLY");
-
- //I096 and I098 are real volume that are really overlapping, can not use ONLY
- gMC->Gspos("I096",23,"I098",22.77,0.0,0.0,idrotm[894],"MANY");
- gMC->Gspos("I096",14,"I098",22.3754,6.57,0.0,idrotm[895],"MANY");
- gMC->Gspos("I096",3,"I098",19.1553,12.3104,0.0,idrotm[896],"MANY");
- gMC->Gspos("I096",16,"I098",15.2714,17.6241,0.0,idrotm[897],"MANY");
- gMC->Gspos("I096",5,"I098",9.459,20.7123,0.0,idrotm[899],"MANY");
- gMC->Gspos("I096",18,"I098",3.3188,23.0826,0.0,idrotm[900],"MANY");
- gMC->Gspos("I096",7,"I098",-3.2405,22.5382,0.0,idrotm[901],"MANY");
- gMC->Gspos("I096",20,"I098",-9.6875,21.2126,0.0,idrotm[902],"MANY");
- gMC->Gspos("I096",9,"I098",-14.9112,17.2084,0.0,idrotm[903],"MANY");
- gMC->Gspos("I096",22,"I098",-19.618,12.6077,0.0,idrotm[904],"MANY");
- gMC->Gspos("I096",11,"I098",-21.8477,6.4151,0.0,idrotm[905],"MANY");
- gMC->Gspos("I096",24,"I098",-23.32,0.0,0.0,idrotm[906],"MANY");
- gMC->Gspos("I096",13,"I098",-21.8477,-6.4151,0.0,idrotm[907],"MANY");
- gMC->Gspos("I096",4,"I098",-19.618,-12.6077,0.0,idrotm[908],"MANY");
- gMC->Gspos("I096",15,"I098",-14.9112,-17.2084,0.0,idrotm[909],"MANY");
- gMC->Gspos("I096",6,"I098",-9.6875,-21.2126,0.0,idrotm[910],"MANY");
- gMC->Gspos("I096",17,"I098",-3.2405,-22.5382,0.0,idrotm[911],"MANY");
- gMC->Gspos("I096",8,"I098",3.3188,-23.0826,0.0,idrotm[912],"MANY");
- gMC->Gspos("I096",19,"I098",9.459,-20.7123,0.0,idrotm[913],"MANY");
- gMC->Gspos("I096",10,"I098",15.2714,-17.6241,0.0,idrotm[914],"MANY");
- gMC->Gspos("I096",21,"I098",19.1553,-12.3104,0.0,idrotm[915],"MANY");
- gMC->Gspos("I096",12,"I098",22.3754,-6.57,0.0,idrotm[916],"MANY");
-
- gMC->Gspos("I094",1,"I097",0.0,0.0,0.0,0,"ONLY");
-
- // idem
- gMC->Gspos("I096",1,"I097",13.87,0.0,0.0,idrotm[894],"MANY");
- gMC->Gspos("I096",32,"I097",13.037,6.2783,0.0,idrotm[917],"MANY");
- gMC->Gspos("I096",25,"I097",8.6478,10.844,0.0,idrotm[918],"MANY");
- gMC->Gspos("I096",34,"I097",3.2199,14.1072,0.0,idrotm[919],"MANY");
- gMC->Gspos("I096",27,"I097",-3.0864,13.5223,0.0,idrotm[920],"MANY");
- gMC->Gspos("I096",36,"I097",-9.0219,11.3131,0.0,idrotm[921],"MANY");
- gMC->Gspos("I096",29,"I097",-12.4964,6.018,0.0,idrotm[922],"MANY");
- gMC->Gspos("I096",2,"I097",-14.47,0.0,0.0,idrotm[906],"MANY");
- gMC->Gspos("I096",31,"I097",-12.4964,-6.018,0.0,idrotm[923],"MANY");
- gMC->Gspos("I096",26,"I097",-9.0219,-11.3131,0.0,idrotm[924],"MANY");
- gMC->Gspos("I096",33,"I097",-3.0864,-13.5223,0.0,idrotm[925],"MANY");
- gMC->Gspos("I096",28,"I097",3.2199,-14.1072,0.0,idrotm[926],"MANY");
- gMC->Gspos("I096",35,"I097",8.6478,-10.844,0.0,idrotm[927],"MANY");
- gMC->Gspos("I096",30,"I097",13.037,-6.2783,0.0,idrotm[928],"MANY");
- }
-
- // --- Place volumes of SSD cone ----------------------------------
-
- if (! AliITSInitGeometry::SSDconeIsTGeoNative()) {
-
- gMC->Gspos("I212",2,"IS01",0.0,0.0,0.0,idrotm[701],"ONLY");
- gMC->Gspos("I212",1,"IS01",0.0,0.0,0.0,0,"ONLY");
- gMC->Gspos("I211",1,"IS01",0.0,0.0,-56.5,0,"ONLY");
-
- gMC->Gspos("I217",1,"IS01",0.0,0.0,-44.4,0,"ONLY"); // this will change after PPR to be symmetric
- // Unfortunately the following piece is not compatible with new SSD
- if (! AliITSInitGeometry::SSDIsTGeoNative())
- gMC->Gspos("I219",1,"IS01",0.0,0.0,-50.25,0,"ONLY"); // this will change after PPR to be symmetric
- gMC->Gspos("I211",2,"IS01",0.0,0.0,56.5,idrotm[701],"ONLY");
-
- // Unfortunately the following piece is not compatible with new SSD
- if (! AliITSInitGeometry::SSDIsTGeoNative())
- gMC->Gspos("I219",2,"IS01",0.0,0.0,51.65,idrotm[701],"ONLY"); // this will change after PPR to be symmetric
- gMC->Gspos("I217",2,"IS01",0.0,0.0,45.8,idrotm[701],"ONLY"); // this will change after PPR to be symmetric
- gMC->Gspos("I214",2,"IS01",0.0,0.0,67.25,idrotm[701],"ONLY");
- gMC->Gspos("I213",2,"IS01",0.0,0.0,62.25,idrotm[701],"ONLY");
- gMC->Gspos("I213",1,"IS01",0.0,0.0,-62.25,0,"ONLY");
- gMC->Gspos("I214",1,"IS01",0.0,0.0,-67.25,0,"ONLY");
-
- gMC->Gspos("I215",19,"IS01",0.0,0.0,0.0,idrotm[702],"ONLY");
- gMC->Gspos("I215",21,"IS01",0.0,0.0,0.0,idrotm[703],"ONLY");
- gMC->Gspos("I215",23,"IS01",0.0,0.0,0.0,idrotm[704],"ONLY");
- gMC->Gspos("I215",24,"IS01",0.0,0.0,0.0,idrotm[705],"ONLY");
- gMC->Gspos("I215",3,"IS01",0.0,0.0,0.0,idrotm[706],"ONLY");
- gMC->Gspos("I215",5,"IS01",0.0,0.0,0.0,idrotm[707],"ONLY");
- gMC->Gspos("I215",7,"IS01",0.0,0.0,0.0,idrotm[708],"ONLY");
- gMC->Gspos("I215",9,"IS01",0.0,0.0,0.0,idrotm[709],"ONLY");
- gMC->Gspos("I215",11,"IS01",0.0,0.0,0.0,idrotm[710],"ONLY");
- gMC->Gspos("I215",13,"IS01",0.0,0.0,0.0,idrotm[711],"ONLY");
- gMC->Gspos("I215",15,"IS01",0.0,0.0,0.0,idrotm[712],"ONLY");
- gMC->Gspos("I215",17,"IS01",0.0,0.0,0.0,idrotm[713],"ONLY");
-
- // Unfortunately the following piece is not compatible with new SSD
- if (! AliITSInitGeometry::SSDIsTGeoNative()) {
- gMC->Gspos("I216",9,"IS01",0.0,0.0,45.5,idrotm[714],"ONLY");
- gMC->Gspos("I216",11,"IS01",0.0,0.0,45.5,idrotm[715],"ONLY");
- gMC->Gspos("I216",12,"IS01",0.0,0.0,45.5,idrotm[716],"ONLY");
- gMC->Gspos("I216",3,"IS01",0.0,0.0,45.5,idrotm[717],"ONLY");
- gMC->Gspos("I216",5,"IS01",0.0,0.0,45.5,idrotm[718],"ONLY");
- gMC->Gspos("I216",7,"IS01",0.0,0.0,45.5,idrotm[719],"ONLY");
- gMC->Gspos("I216",10,"IS01",0.0,0.0,-44,idrotm[720],"ONLY");
- gMC->Gspos("I216",1,"IS01",0.0,0.0,-44,idrotm[721],"ONLY");
- gMC->Gspos("I216",2,"IS01",0.0,0.0,-44,idrotm[722],"ONLY");
- gMC->Gspos("I216",4,"IS01",0.0,0.0,-44,idrotm[723],"ONLY");
- gMC->Gspos("I216",6,"IS01",0.0,0.0,-44,idrotm[724],"ONLY");
- gMC->Gspos("I216",8,"IS01",0.0,0.0,-44,idrotm[725],"ONLY");
- }
-
- gMC->Gspos("I215",1,"IS01",0.0,0.0,0.0,idrotm[726],"ONLY");
- gMC->Gspos("I215",2,"IS01",0.0,0.0,0.0,idrotm[727],"ONLY");
- gMC->Gspos("I215",4,"IS01",0.0,0.0,0.0,idrotm[728],"ONLY");
- gMC->Gspos("I215",6,"IS01",0.0,0.0,0.0,idrotm[729],"ONLY");
- gMC->Gspos("I215",8,"IS01",0.0,0.0,0.0,idrotm[733],"ONLY");
- gMC->Gspos("I215",10,"IS01",0.0,0.0,0.0,idrotm[730],"ONLY");
- gMC->Gspos("I215",12,"IS01",0.0,0.0,0.0,idrotm[731],"ONLY");
- gMC->Gspos("I215",14,"IS01",0.0,0.0,0.0,idrotm[768],"ONLY");
- gMC->Gspos("I215",16,"IS01",0.0,0.0,0.0,idrotm[732],"ONLY");
- gMC->Gspos("I215",18,"IS01",0.0,0.0,0.0,idrotm[734],"ONLY");
- gMC->Gspos("I215",20,"IS01",0.0,0.0,0.0,idrotm[798],"ONLY");
- gMC->Gspos("I215",22,"IS01",0.0,0.0,0.0,idrotm[735],"ONLY");
- }
-
- // --- Place subdetectors' mother volumes and supports' mother volumes
- // into ITS mother volume ITSD
-
- if (! AliITSInitGeometry::SPDIsTGeoNative())
- gMC->Gspos("IT12",1,"ITSD",0.0,0.0,0.0,0,"ONLY"); // SPD mother volume
- if (! AliITSInitGeometry::SDDIsTGeoNative())
- gMC->Gspos("IT34",1,"ITSD",0.0,0.0,0.0,0,"ONLY"); // SDD mother volume
- if (! AliITSInitGeometry::SSDIsTGeoNative())
- gMC->Gspos("IT56",1,"ITSD",0.0,0.0,0.0,0,"ONLY"); // SSD mother volume
- if (! AliITSInitGeometry::SDDconeIsTGeoNative())
- gMC->Gspos("IS02",1,"ITSD",0.0,0.0,0.0,0,"ONLY"); // SDD cones/supports
- if (! AliITSInitGeometry::SSDconeIsTGeoNative())
- gMC->Gspos("IS01",1,"ITSD",0.0,0.0,0.0,0,"ONLY"); // SSD cones/supports
-
-
- // **************************** SERVICES *********************************
-
-
- // --- DEFINE CABLES AT THE END OF THE ITS CONES - COPPER PART
- // UPPER PART
-
- if (! AliITSInitGeometry::ServicesAreTGeoNative()) {
-
- dgh[0] = 46.;
- dgh[1] = 46.+1.0;
- dgh[2] = 9.5;
- dgh[3] = 12.;
- dgh[4] = 168.;
-
- gMC->Gsvolu("I1CU", "TUBS", idtmed[213], dgh, 5);
- gMC->Gspos("I1CU", 1, "ITSV", 0., 0., 83.5, 0, "ONLY");
- gMC->Gspos("I1CU", 2, "ITSV", 0., 0., -83.5, idrotm[200], "ONLY");
-
- // --- DEFINE CABLES AT THE END OF THE ITS CONES - COPPER PART
- // LOWER PART
-
- dgh[0] = 46.;
- dgh[1] = 46.+1.0;
- dgh[2] = 9.5;
- dgh[3] = 192.;
- dgh[4] = 348.;
-
- gMC->Gsvolu("I2CU", "TUBS", idtmed[213], dgh, 5);
- gMC->Gspos("I2CU", 1, "ITSV", 0., 0., 83.5, 0, "ONLY");
- gMC->Gspos("I2CU", 2, "ITSV", 0., 0., -83.5, idrotm[200], "ONLY");
-
-
- // --- DEFINE CABLES AT THE END OF THE ITS CONES - CARBON PART
- // UPPER PART
-
- dgh[0] = 46.+1.0;
- dgh[1] = 46.+1.0+1.5;
- dgh[2] = 9.5;
- dgh[3] = 12.;
- dgh[4] = 168.;
-
- gMC->Gsvolu("I1CC", "TUBS", idtmed[225], dgh, 5);
- gMC->Gspos("I1CC", 1, "ITSV", 0., 0., 83.5, 0, "ONLY");
- gMC->Gspos("I1CC", 2, "ITSV", 0., 0., -83.5, idrotm[200], "ONLY");
-
- // --- DEFINE CABLES AT THE END OF THE ITS CONES - CARBON PART
- // LOWER PART
-
- dgh[0] = 46.+1.0;
- dgh[1] = 46.+1.0+1.5;
- dgh[2] = 9.5;
- dgh[3] = 192.;
- dgh[4] = 348.;
-
- gMC->Gsvolu("I2CC", "TUBS", idtmed[225], dgh, 5);
- gMC->Gspos("I2CC", 1, "ITSV", 0., 0., 83.5, 0, "ONLY");
- gMC->Gspos("I2CC", 2, "ITSV", 0., 0., -83.5, idrotm[200], "ONLY");
-
- // --- DEFINE PATCH PANELS AT THE END OF THE ITS CONES
- // UPPER PART
-
- dgh[0] = 46.;
- dgh[1] = 56.;
- dgh[2] = 2.25;
- dgh[3] = 12.;
- dgh[4] = 168.;
-
- gMC->Gsvolu("IPA1", "TUBS", idtmed[210], dgh, 5);
- gMC->Gspos("IPA1", 1, "ITSV", 0., 0., 95.25, 0, "ONLY");
- gMC->Gspos("IPA1", 2, "ITSV", 0., 0., -95.25, idrotm[200], "ONLY");
-
- // --- DEFINE PATCH PANELS AT THE END OF THE ITS CONES
- // LOWER PART
-
- dgh[0] = 46.;
- dgh[1] = 56.;
- dgh[2] = 2.25;
- dgh[3] = 192.;
- dgh[4] = 348.;
-
- gMC->Gsvolu("IPA2", "TUBS", idtmed[210], dgh, 5);
- gMC->Gspos("IPA2", 1, "ITSV", 0., 0., 95.25, 0, "ONLY");
- gMC->Gspos("IPA2", 2, "ITSV", 0., 0., -95.25, idrotm[200], "ONLY");
-
-
- // --- DEFINE CABLES/COOLING BELOW THE TPC ON THE ABSORBER SIDE - COPPER PART
- // UPPER PART
-
- dgh[0] = (ztpc-97.5-2.3)/2.;
- dgh[1] = 46.2;
- dgh[2] = 46.2+1.0;
- dgh[3] = 62.3;
- dgh[4] = 62.3+1.0;
- dgh[5] = 12.;
- dgh[6] = 168.;
- gMC->Gsvolu("ICU1", "CONS", idtmed[213], dgh, 7);
- // gMC->Gspos("ICU1", 1, "ITSV", 0., 0.,97.5+dgh[0], 0, "ONLY");
- gMC->Gspos("ICU1", 1, "ITSV", 0., 0.,-(97.5+dgh[0]+4.6), idrotm[199], "ONLY");
-
- // --- DEFINE CABLES/COOLING BELOW THE TPC ON THE ABSORBER SIDE - COPPER PART
- // LOWER PART
-
- dgh[0] = (ztpc-97.5-2.3)/2.;
- dgh[1] = 46.2;
- dgh[2] = 46.2+1.0;
- dgh[3] = 62.3;
- dgh[4] = 62.3+1.0;
- dgh[5] = 192.;
- dgh[6] = 348.;
- gMC->Gsvolu("ICU2", "CONS", idtmed[213], dgh, 7);
- // gMC->Gspos("ICU2", 1, "ITSV", 0., 0., 97.5+dgh[0], 0, "ONLY");
- gMC->Gspos("ICU2", 1, "ITSV", 0., 0., -(97.5+dgh[0]+4.6), idrotm[199], "ONLY");
-
-
- // -- DEFINE CABLES/COOLING BELOW THE TPC ON THE ABSORBER SIDE - CARBON PART
- // UPPER PART
-
- dgh[0] = (ztpc-97.5-2.3)/2.;
- dgh[1] = 46.2+1.0;
- dgh[2] = 46.2+1.0+1.5;
- dgh[3] = 62.3+1.0;
- dgh[4] = 62.3+1.0+1.5;
- dgh[5] = 12.;
- dgh[6] = 168.;
- gMC->Gsvolu("ICC1", "CONS", idtmed[225], dgh, 7);
- // gMC->Gspos("ICC1", 1, "ITSV", 0., 0., 97.5+dgh[0], 0, "ONLY");
- gMC->Gspos("ICC1", 1, "ITSV", 0., 0., -(97.5+dgh[0]+4.6), idrotm[199], "ONLY");
-
- // --- DEFINE CABLES/COOLING BELOW THE TPC ON THE ABSORBER SIDE - CARBON PART
- // LOWER PART
-
- dgh[0] = (ztpc-97.5-2.3)/2.;
- dgh[1] = 46.2+1.0;
- dgh[2] = 46.2+1.0+1.5;
- dgh[3] = 62.3+1.0;
- dgh[4] = 62.3+1.0+1.5;
- dgh[5] = 192.;
- dgh[6] = 348.;
- gMC->Gsvolu("ICC2", "CONS", idtmed[225], dgh, 7);
- // gMC->Gspos("ICC2", 1, "ITSV", 0., 0., 97.5+dgh[0], 0, "ONLY");
- gMC->Gspos("ICC2", 1, "ITSV", 0., 0., -(97.5+dgh[0]+4.6), idrotm[199], "ONLY");
-
- // -- DEFINE CABLES/COOLING BEHIND THE TPC ON THE ABSORBER SIDE - COPPER PART
- // UPPER PART
-
- dgh[0] = 62.2;
- dgh[1] = 74.5;
- dgh[2] = 0.5;
- dgh[3] = 12.;
- dgh[4] = 168.;
- gMC->Gsvolu("ICU3", "TUBS", idtmed[213], dgh, 5);
- // gMC->Gspos("ICU3", 1, "ITSV", 0., 0., ztpc+1.5+dgh[2], 0, "ONLY");
- gMC->Gspos("ICU3", 1, "ITSV", 0., 0., -(ztpc+1.5+dgh[2]+1.), idrotm[199], "ONLY");
-
- // -- DEFINE CABLES/COOLING BEHIND THE TPC ON THE ABSORBER SIDE - COPPER PART
- // LOWER PART
-
- dgh[0] = 62.2;
- dgh[1] = 74.5;
- dgh[2] = 0.5;
- dgh[3] = 192.;
- dgh[4] = 348.;
- gMC->Gsvolu("ICU4", "TUBS", idtmed[213], dgh, 5);
- // gMC->Gspos("ICU4", 1, "ITSV", 0., 0., ztpc+1.5+dgh[2], 0, "ONLY");
- gMC->Gspos("ICU4", 1, "ITSV", 0., 0., -(ztpc+1.5+dgh[2]+1.), idrotm[199], "ONLY");
-
- // -- DEFINE CABLES/COOLING BEHIND THE TPC ON THE ABSORBER SIDE - CARBON PART
- // UPPER PART
-
- dgh[0] = 64.8;
- dgh[1] = 74.5;
- dgh[2] = 0.75;
- dgh[3] = 12.;
- dgh[4] = 168.;
- gMC->Gsvolu("ICC3", "TUBS", idtmed[225], dgh, 5);
- // gMC->Gspos("ICC3", 1, "ITSV", 0., 0., ztpc+dgh[2], 0, "ONLY");
- gMC->Gspos("ICC3", 1, "ITSV", 0., 0., -(ztpc+dgh[2]), idrotm[199], "ONLY");
-
- // -- DEFINE CABLES/COOLING BEHIND THE TPC ON THE ABSORBER SIDE - CARBON PART
- // LOWER PART
-
- dgh[0] = 64.8;
- dgh[1] = 74.5;
- dgh[2] = 0.75;
- dgh[3] = 192.;
- dgh[4] = 348.;
- gMC->Gsvolu("ICC4", "TUBS", idtmed[225], dgh, 5);
- // gMC->Gspos("ICC4", 1, "ITSV", 0., 0., ztpc+dgh[2], 0, "ONLY");
- gMC->Gspos("ICC4", 1, "ITSV", 0., 0., -(ztpc+dgh[2]), idrotm[199], "ONLY");
-
-
- // --- DEFINE CABLES/COOLING BELOW THE TPC ON THE OTHER SIDE W.R.T.
- // THE ABSORBER - COPPER PART - UPPER PART
-
- dgh[0] = 46.;
- dgh[1] = 46.+1.0;
-// dgh[2] = (ztpc-97.5+1.5-2.5)/2.;
- dgh[2] = (186.6 - 101.1)/2.;
- dgh[3] = 12.;
- dgh[4] = 168.;
- gMC->Gsvolu("ICU5", "TUBS", idtmed[213], dgh, 5);
- // gMC->Gspos("ICU5", 1, "ITSV", 0., 0., -97.5-dgh[2], 0, "ONLY");
- gMC->Gspos("ICU5", 1, "ITSV", 0., 0., -(-101.1-dgh[2]), idrotm[199], "ONLY");
-
- dgh[0] = (ztpc - 1.0 - 186.6)/2.;
- dgh[1] = 64.0;
- dgh[2] = 64.0+1.0;
- dgh[3] = 46.;
- dgh[4] = 46.+1.0;
- dgh[5] = 12.;
- dgh[6] = 168.;
- gMC->Gsvolu("ICU9", "CONS", idtmed[213], dgh, 7);
- gMC->Gspos("ICU9", 1, "ITSV", 0., 0., -(-186.6-dgh[0]), idrotm[199], "ONLY");
-
- // --- DEFINE CABLES/COOLING BELOW THE TPC ON THE OTHER SIDE W.R.T.
- // THE ABSORBER - COPPER PART - LOWER PART
-
- dgh[0] = 46.;
- dgh[1] = 46.+1.0;
-// dgh[2] = (ztpc-97.5+1.5-2.5)/2.;
- dgh[2] = (186.6 - 101.1)/2.;
- dgh[3] = 192.;
- dgh[4] = 348.;
- gMC->Gsvolu("ICU6", "TUBS", idtmed[213], dgh, 5);
- // gMC->Gspos("ICU6", 1, "ITSV", 0., 0., -97.5-dgh[2], 0, "ONLY");
- gMC->Gspos("ICU6", 1, "ITSV", 0., 0., -(-101.1-dgh[2]), idrotm[199], "ONLY");
-
- dgh[0] = (ztpc - 1.0 - 186.6)/2.;
- dgh[1] = 64.0;
- dgh[2] = 64.0+1.0;
- dgh[3] = 46.;
- dgh[4] = 46.+1.0;
- dgh[5] = 192.;
- dgh[6] = 348.;
- gMC->Gsvolu("ICU0", "CONS", idtmed[213], dgh, 7);
- gMC->Gspos("ICU0", 1, "ITSV", 0., 0., -(-186.6-dgh[0]), idrotm[199], "ONLY");
-
- // --- DEFINE CABLES/COOLING BELOW THE TPC ON THE OTHER SIDE W.R.T.
- // THE ABSORBER - CARBON PART - UPPER PART
-
- dgh[0] = 46.+1.0;
- dgh[1] = 46.+1.0+1.5;
-// dgh[2] = (ztpc-97.5)/2.;
- dgh[2] = (186.6 - 101.1)/2.;
- dgh[3] = 12.;
- dgh[4] = 168.;
- gMC->Gsvolu("ICC5", "TUBS", idtmed[225], dgh, 5);
- // gMC->Gspos("ICC5", 1, "ITSV", 0., 0., -97.5-dgh[2], 0, "ONLY");
- gMC->Gspos("ICC5", 1, "ITSV", 0., 0., -(-101.1-dgh[2]), idrotm[199], "ONLY");
-
- dgh[0] = (ztpc - 1.0 - 186.6)/2.;
- dgh[1] = 64.0+1.0;
- dgh[2] = 64.0+1.0+1.5;
- dgh[3] = 46.+1.0;
- dgh[4] = 46.+1.0+1.5;
- dgh[5] = 12.;
- dgh[6] = 168.;
- gMC->Gsvolu("ICC9", "CONS", idtmed[225], dgh, 7);
- gMC->Gspos("ICC9", 1, "ITSV", 0., 0., -(-186.6-dgh[0]), idrotm[199], "ONLY");
-
- // --- DEFINE CABLES/COOLING BELOW THE TPC ON THE OTHER SIDE W.R.T.
- // THE ABSORBER - CARBON PART - LOWER PART
-
- dgh[0] = 46.+1.0;
- dgh[1] = 46.+1.0+1.5;
-// dgh[2] = (ztpc-97.5)/2.;
- dgh[2] = (186.6 - 101.1)/2.;
- dgh[3] = 192.;
- dgh[4] = 348.;
- gMC->Gsvolu("ICC6", "TUBS", idtmed[225], dgh, 5);
- // gMC->Gspos("ICC6", 1, "ITSV", 0., 0., -97.5-dgh[2], 0, "ONLY");
- gMC->Gspos("ICC6", 1, "ITSV", 0., 0., -(-101.1-dgh[2]), idrotm[199], "ONLY");
-
- dgh[0] = (ztpc - 1.0 - 186.6)/2.;
- dgh[1] = 64.0+1.0;
- dgh[2] = 64.0+1.0+1.5;
- dgh[3] = 46.+1.0;
- dgh[4] = 46.+1.0+1.5;
- dgh[5] = 192.;
- dgh[6] = 348.;
- gMC->Gsvolu("ICC0", "CONS", idtmed[225], dgh, 7);
- gMC->Gspos("ICC0", 1, "ITSV", 0., 0., -(-186.6-dgh[0]), idrotm[199], "ONLY");
-
- // --- DEFINE CABLES/COOLING BELOW THE TPC ON THE OTHER SIDE W.R.T.
- // THE ABSORBER - ALUMINUM PART - UPPER PART
-
- dgh[0] = 46.+1.0+1.5;
- dgh[1] = 46.+1.0+1.5+0.4;
-// dgh[2] = (ztpc-97.5)/2.;
- dgh[2] = (186.6 - 101.1)/2.;
- dgh[3] = 12.;
- dgh[4] = 168.;
- gMC->Gsvolu("ICK5", "TUBS", idtmed[210], dgh, 5);
- // gMC->Gspos("ICC5", 1, "ITSV", 0., 0., -97.5-dgh[2], 0, "ONLY");
- gMC->Gspos("ICK5", 1, "ITSV", 0., 0., -(-101.1-dgh[2]), idrotm[199], "ONLY");
-
- dgh[0] = (ztpc - 1.0 - 186.6)/2.;
- dgh[1] = 64.0+1.0+1.5;
- dgh[2] = 64.0+1.0+1.5+0.4;
- dgh[3] = 46.+1.0+1.5;
- dgh[4] = 46.+1.0+1.5+0.4;
- dgh[5] = 12.;
- dgh[6] = 168.;
- gMC->Gsvolu("ICK9", "CONS", idtmed[210], dgh, 7);
- gMC->Gspos("ICK9", 1, "ITSV", 0., 0., -(-186.6-dgh[0]), idrotm[199], "ONLY");
-
-
- dgh[0] = 46.+1.0+1.5+0.4;
- dgh[1] = 46.+1.0+1.5+0.4+5.5;
- dgh[2] = 4.0/2;
- dgh[3] = 12.;
- dgh[4] = 168.;
- gMC->Gsvolu("IKK7", "TUBS", idtmed[210], dgh, 5);
-// gMC->Gspos("IKK7", 1, "ITSV", 0., 0., -(-101.1-dgh[2]), idrotm[199], "ONLY");
- gMC->Gspos("IKK7", 1, "ITSV", 0., 0., -(-186.6+dgh[2]+5+4+34+31.8), idrotm[199], "ONLY");
-
-
- dgh[0] = 46.+1.0+1.5+0.4;
- dgh[1] = 46.+1.0+1.5+0.4+0.3;
- dgh[2] = 34.0/2;
- dgh[3] = 12.;
- dgh[4] = 168.;
- gMC->Gsvolu("IKK5", "TUBS", idtmed[210], dgh, 5);
-// gMC->Gspos("IKK5", 1, "ITSV", 0., 0., -(-101.1-dgh[2]-4), idrotm[199], "ONLY");
- gMC->Gspos("IKK5", 1, "ITSV", 0., 0., -(-186.6+dgh[2]+5+4+31.8), idrotm[199], "ONLY");
-
-
- dgh[0] = 46.+1.0+1.5+0.4;
- dgh[1] = 46.+1.0+1.5+0.4+5.5;
- dgh[2] = 4.0/2;
- dgh[3] = 12.;
- dgh[4] = 168.;
- gMC->Gsvolu("IKK3", "TUBS", idtmed[210], dgh, 5);
-// gMC->Gspos("IKK3", 1, "ITSV", 0., 0., -(-101.1-dgh[2]-4-34), idrotm[199], "ONLY");
- gMC->Gspos("IKK3", 1, "ITSV", 0., 0., -(-186.6+dgh[2]+5+31.8), idrotm[199], "ONLY");
-
-
- dgh[0] = 46.+1.0+1.5+0.4;
- dgh[1] = 46.+1.0+1.5+0.4+6.0;
- dgh[2] = 5.0/2;
- dgh[3] = 12.;
- dgh[4] = 168.;
- gMC->Gsvolu("IKK1", "TUBS", idtmed[210], dgh, 5);
-// gMC->Gspos("IKK1", 1, "ITSV", 0., 0., -(-101.1-dgh[2]-4-34-4), idrotm[199], "ONLY");
- gMC->Gspos("IKK1", 1, "ITSV", 0., 0., -(-186.6+dgh[2]+31.8), idrotm[199], "ONLY");
-
-
- dgh[0] = 46.+1.0+1.5+0.4;
- dgh[1] = 46.+1.0+1.5+0.4+0.3;
- dgh[2] = 31.8/2;
- dgh[3] = 12.;
- dgh[4] = 168.;
- gMC->Gsvolu("IKK9", "TUBS", idtmed[210], dgh, 5);
- gMC->Gspos("IKK9", 1, "ITSV", 0., 0., -(-186.6+dgh[2]), idrotm[199], "ONLY");
-
-
- dgh[0] = 66.2/2;
- dgh[1] = 46.+1.0+1.5+0.4+12.5;
- dgh[2] = 46.+1.0+1.5+0.4+12.5+0.3;
- dgh[3] = 46.+1.0+1.5+0.4;
- dgh[4] = 46.+1.0+1.5+0.4+0.3;
- dgh[5] = 12.;
- dgh[6] = 168.;
- gMC->Gsvolu("ICK7", "CONS", idtmed[210], dgh, 7);
- gMC->Gspos("ICK7", 1, "ITSV", 0., 0., -(-186.6-dgh[0]), idrotm[199], "ONLY");
-
- // --- DEFINE CABLES/COOLING BELOW THE TPC ON THE OTHER SIDE W.R.T.
- // THE ABSORBER - ALUMINUM PART - LOWER PART
-
- dgh[0] = 46.+1.0+1.5;
- dgh[1] = 46.+1.0+1.5+0.4;
-// dgh[2] = (ztpc-97.5)/2.;
- dgh[2] = (186.6 - 101.1)/2.;
- dgh[3] = 192.;
- dgh[4] = 348.;
- gMC->Gsvolu("ICK6", "TUBS", idtmed[210], dgh, 5);
- // gMC->Gspos("ICC6", 1, "ITSV", 0., 0., -97.5-dgh[2], 0, "ONLY");
- gMC->Gspos("ICK6", 1, "ITSV", 0., 0., -(-101.1-dgh[2]), idrotm[199], "ONLY");
-
- dgh[0] = (ztpc - 1.0 - 186.6)/2.;
- dgh[1] = 64.0+1.0+1.5;
- dgh[2] = 64.0+1.0+1.5+0.4;
- dgh[3] = 46.+1.0+1.5;
- dgh[4] = 46.+1.0+1.5+0.4;
- dgh[5] = 192.;
- dgh[6] = 348.;
- gMC->Gsvolu("ICK0", "CONS", idtmed[210], dgh, 7);
- gMC->Gspos("ICK0", 1, "ITSV", 0., 0., -(-186.6-dgh[0]), idrotm[199], "ONLY");
-
-
- dgh[0] = 46.+1.0+1.5+0.4;
- dgh[1] = 46.+1.0+1.5+0.4+5.5;
- dgh[2] = 4.0/2;
- dgh[3] = 192.;
- dgh[4] = 348.;
- gMC->Gsvolu("IKK8", "TUBS", idtmed[210], dgh, 5);
-// gMC->Gspos("IKK8", 1, "ITSV", 0., 0., -(-101.1-dgh[2]), idrotm[199], "ONLY");
- gMC->Gspos("IKK8", 1, "ITSV", 0., 0., -(-186.6+dgh[2]+5+4+34+31.8), idrotm[199], "ONLY");
-
-
- dgh[0] = 46.+1.0+1.5+0.4;
- dgh[1] = 46.+1.0+1.5+0.4+0.3;
- dgh[2] = 34.0/2;
- dgh[3] = 192.;
- dgh[4] = 348.;
- gMC->Gsvolu("IKK6", "TUBS", idtmed[210], dgh, 5);
-// gMC->Gspos("IKK6", 1, "ITSV", 0., 0., -(-101.1-dgh[2]-4), idrotm[199], "ONLY");
- gMC->Gspos("IKK6", 1, "ITSV", 0., 0., -(-186.6+dgh[2]+5+4+31.8), idrotm[199], "ONLY");
-
-
- dgh[0] = 46.+1.0+1.5+0.4;
- dgh[1] = 46.+1.0+1.5+0.4+5.5;
- dgh[2] = 4.0/2;
- dgh[3] = 192.;
- dgh[4] = 348.;
- gMC->Gsvolu("IKK4", "TUBS", idtmed[210], dgh, 5);
-// gMC->Gspos("IKK4", 1, "ITSV", 0., 0., -(-101.1-dgh[2]-4-34), idrotm[199], "ONLY");
- gMC->Gspos("IKK4", 1, "ITSV", 0., 0., -(-186.6+dgh[2]+5+31.8), idrotm[199], "ONLY");
-
-
- dgh[0] = 46.+1.0+1.5+0.4;
- dgh[1] = 46.+1.0+1.5+0.4+6.0;
- dgh[2] = 5.0/2;
- dgh[3] = 192.;
- dgh[4] = 348.;
- gMC->Gsvolu("IKK2", "TUBS", idtmed[210], dgh, 5);
-// gMC->Gspos("IKK2", 1, "ITSV", 0., 0., -(-101.1-dgh[2]-4-34-4), idrotm[199], "ONLY");
- gMC->Gspos("IKK2", 1, "ITSV", 0., 0., -(-186.6+dgh[2]+31.8), idrotm[199], "ONLY");
-
-
- dgh[0] = 46.+1.0+1.5+0.4;
- dgh[1] = 46.+1.0+1.5+0.4+0.3;
- dgh[2] = 31.8/2;
- dgh[3] = 192.;
- dgh[4] = 348.;
- gMC->Gsvolu("IKK0", "TUBS", idtmed[210], dgh, 5);
- gMC->Gspos("IKK0", 1, "ITSV", 0., 0., -(-186.6+dgh[2]), idrotm[199], "ONLY");
-
-
- dgh[0] = 66.2/2;
- dgh[1] = 46.+1.0+1.5+0.4+12.5;
- dgh[2] = 46.+1.0+1.5+0.4+12.5+0.3;
- dgh[3] = 46.+1.0+1.5+0.4;
- dgh[4] = 46.+1.0+1.5+0.4+0.3;
- dgh[5] = 192.;
- dgh[6] = 348.;
- gMC->Gsvolu("ICK8", "CONS", idtmed[210], dgh, 7);
- gMC->Gspos("ICK8", 1, "ITSV", 0., 0., -(-186.6-dgh[0]), idrotm[199], "ONLY");
-
-
- // --- DEFINE CABLES/COOLING BEHIND THE TPC ON OTHER SIDE W.R.T. THE ABSORBER
- // COPPER PART - UPPER PART
-
- dgh[0] = 64.0;
- dgh[1] = 74.5;
- dgh[2] = 0.5;
- dgh[3] = 12.;
- dgh[4] = 168.;
- gMC->Gsvolu("ICU7", "TUBS", idtmed[213], dgh, 5);
- gMC->Gspos("ICU7", 1, "ITSV", 0., 0., (ztpc+1.5+dgh[2]), idrotm[199], "ONLY");
-
- // --- DEFINE CABLES/COOLING BEHIND THE TPC ON OTHER SIDE W.R.T. THE ABSORBER
- // COPPER PART - LOWER PART
-
- dgh[0] = 64.0;
- dgh[1] = 74.5;
- dgh[2] = 0.5;
- dgh[3] = 192.;
- dgh[4] = 348.;
- gMC->Gsvolu("ICU8", "TUBS", idtmed[213], dgh, 5);
- gMC->Gspos("ICU8", 1, "ITSV", 0., 0., (ztpc+1.5+dgh[2]), idrotm[199], "ONLY");
-
- // --- DEFINE CABLES/COOLING BEHIND THE TPC ON OTHER SIDE W.R.T. THE ABSORBER
- // CARBON PART - UPPER PART
-
- dgh[0] = 64.0+1.0;
- dgh[1] = 74.5;
- dgh[2] = 0.75;
- dgh[3] = 12.;
- dgh[4] = 168.;
- gMC->Gsvolu("ICC7", "TUBS", idtmed[225], dgh, 5);
- gMC->Gspos("ICC7", 1, "ITSV", 0., 0., (ztpc+dgh[2]), idrotm[199], "ONLY");
-
- // --- DEFINE CABLES/COOLING BEHIND THE TPC ON OTHER SIDE W.R.T. THE ABSORBER
- // CARBON PART - LOWER PART
-
- dgh[0] = 64.0+1.0;
- dgh[1] = 74.5;
- dgh[2] = 0.75;
- dgh[3] = 192.;
- dgh[4] = 348.;
- gMC->Gsvolu("ICC8", "TUBS", idtmed[225], dgh, 5);
- gMC->Gspos("ICC8", 1, "ITSV", 0., 0., (ztpc+dgh[2]), idrotm[199], "ONLY");
-
-
-
- // --- DEFINE HOOK TO THE TPC ON OTHER SIDE W.R.T. THE ABSORBER - UPPER PART
-
- dgh[0] = 74.7;
- dgh[1] = 75.3;
- dgh[2] = 2.5;
- dgh[3] = 12.;
- dgh[4] = 168.;
- gMC->Gsvolu("IHK1", "TUBS", idtmed[264], dgh, 5);
- gMC->Gspos("IHK1", 1, "ITSV", 0., 0., -(-ztpc-dgh[2]), idrotm[199], "ONLY");
-
- // --- DEFINE HOOK TO THE TPC ON OTHER SIDE W.R.T. THE ABSORBER - LOWER PART
-
- dgh[0] = 74.7;
- dgh[1] = 75.3;
- dgh[2] = 2.5;
- dgh[3] = 192.;
- dgh[4] = 348.;
- gMC->Gsvolu("IHK2", "TUBS", idtmed[264], dgh, 5);
- gMC->Gspos("IHK2", 1, "ITSV", 0., 0., -(-ztpc-dgh[2]), idrotm[199], "ONLY");
-
- }
-
-
- // --- DEFINE RAILS BETWEEN THE ITS AND THE TPC
- if (! AliITSInitGeometry::SupportIsTGeoNative()) {
-
- if (rails == 1) {
-
- dgh[0] = 2.;
- dgh[1] = 8.;
- dgh[2] = 190.;
- gMC->Gsvolu("IRA1", "BOX ", idtmed[268], dgh, 3);
- gMC->Gspos("IRA1", 1, "ITSV", 53.5, 0., 69.5, idrotm[199], "ONLY");
- gMC->Gsvolu("IRA2", "BOX ", idtmed[268], dgh, 3);
- gMC->Gspos("IRA2", 1, "ITSV", -53.5, 0., 69.5, idrotm[199], "ONLY");
-
- dgh[0] = 2.-0.5;// 0.5 was determined in such a way that the aluminum area is 20.9 cm^2
- dgh[1] = 8.-0.5;// 0.5 was determined in such a way that the aluminum area is 20.9 cm^2
- dgh[2] = 190.;
- gMC->Gsvolu("IRA3", "BOX ", idtmed[205], dgh, 3);
- gMC->Gspos("IRA3", 1, "IRA1", 0., 0., 0., 0, "ONLY");
- gMC->Gsvolu("IRA4", "BOX ", idtmed[205], dgh, 3);
- gMC->Gspos("IRA4", 1, "IRA2", 0., 0., 0., 0, "ONLY");
-
- }
-
- // --- DEFINE CYLINDERS HOLDING RAILS BETWEEN THE ITS AND THE TPC
-
- dgh[0] = 56.9;
- dgh[1] = 59.;
- dgh[2] = 0.6;
- gMC->Gsvolu("ICYL", "TUBE", idtmed[210], dgh, 3);
- gMC->Gspos("ICYL", 1, "ITSS", 0., 0., -74.1,idrotm[199], "ONLY");
- gMC->Gspos("ICYL", 2, "ITSS", 0., 0., 74.1, 0, "ONLY");
-
- // --- DEFINE SUPPORTS FOR RAILS ATTACHED TO THE CYLINDERS
-
- dgh[0] = 0.;
- dgh[1] = 3.;
- dgh[2] = 5.;// 5. comes from the fact that the volume has to be 567.6/2 cm^3
- gMC->Gsvolu("ISR1", "TUBE", idtmed[284], dgh, 3);
- gMC->Gspos("ISR1", 1, "ITSS", 53.4292, 10.7053, -79.75,idrotm[199],"ONLY");
- gMC->Gspos("ISR1", 2, "ITSS", 53.4292, -10.7053, -79.75,idrotm[199],"ONLY");
- gMC->Gspos("ISR1", 3, "ITSS", -53.4292, 10.7053, -79.75,idrotm[199],"ONLY");
- gMC->Gspos("ISR1", 4, "ITSS", -53.4292, -10.7053, -79.75,idrotm[199],"ONLY");
- gMC->Gspos("ISR1", 5, "ITSS", 53.4292, 10.7053, 79.75,idrotm[199],"ONLY");
- gMC->Gspos("ISR1", 6, "ITSS", 53.4292, -10.7053, 79.75,idrotm[199],"ONLY");
- gMC->Gspos("ISR1", 7, "ITSS", -53.4292, 10.7053, 79.75,idrotm[199],"ONLY");
- gMC->Gspos("ISR1", 8, "ITSS", -53.4292, -10.7053, 79.75,idrotm[199],"ONLY");
-
- // --- DEFINE SUPPORTS FOR RAILS ATTACHED TO THE ABSORBER
-
- dgh[0] = 5.;
- dgh[1] = 12.;
- dgh[2] = 5.;
- gMC->Gsvolu("ISR2", "BOX ", idtmed[210], dgh, 3);
- gMC->Gspos("ISR2", 1, "ITSS", -53.5, 0., 125.5, 0, "ONLY");
- gMC->Gsvolu("ISR3", "BOX ", idtmed[210], dgh, 3);
- gMC->Gspos("ISR3", 1, "ITSS", 53.5, 0., 125.5, 0, "ONLY");
-
- dgh[0] = 5.-2.;
- dgh[1] = 12.-2.;
- dgh[2] = 5.;
- gMC->Gsvolu("ISR4", "BOX ", idtmed[205], dgh, 3);
- gMC->Gspos("ISR4", 1, "ISR2", 0., 0., 0., 0, "ONLY");
- gMC->Gsvolu("ISR5", "BOX ", idtmed[205], dgh, 3);
- gMC->Gspos("ISR5", 1, "ISR3", 0., 0., 0., 0, "ONLY");
-
- // --- DEFINE SUPPORTS TO ATTACH THE ITS TO THE TPC
-
- dgh[0] = 0.;
- dgh[1] = 5.;
- dgh[2] = 2.;
- gMC->Gsvolu("ISR6", "TUBE", idtmed[210], dgh, 3);
- gMC->Gspos("ISR6", 1, "ITSS", 0., 54., 77., 0, "ONLY");
- gMC->Gspos("ISR6", 2, "ITSS", 0., 54., -77., 0, "ONLY");
- gMC->Gspos("ISR6", 3, "ITSS", 0., -54., -77., 0, "ONLY");
-
- }
-
- {
- if (!gGeoManager) {
- AliError("TGeoManager doesn't exist !");
- return;
- }
-
- //====== Converting mother volumes of alignable objects
- //====== into TGeoAssemblies :
-
- TObjArray *list = gGeoManager->GetListOfVolumes();
-
- if (! AliITSInitGeometry::SPDIsTGeoNative()) {
- char spdLaddName[20] = "I10B";
-
- TGeoVolume *toTransform = gGeoManager->FindVolumeFast(spdLaddName);
- Int_t index = list->IndexOf(toTransform);
- do {
- TGeoVolume *transformed = 0; // this will be in fact TGeoVolumeAssembly
- if (toTransform)
- transformed = TGeoVolumeAssembly::MakeAssemblyFromVolume(toTransform);
- if (transformed)
- gGeoManager->ReplaceVolume(toTransform, transformed);
- index++;
- toTransform = (TGeoVolume*)list->At(index);
- }
- while (strcmp(spdLaddName,toTransform->GetName()) == 0);
- }
-
- // SPD 2
- if (! AliITSInitGeometry::SPDIsTGeoNative()) {
- char spdLaddName[20] = "I20B";
-
- TGeoVolume *toTransform = gGeoManager->FindVolumeFast(spdLaddName);
- Int_t index = list->IndexOf(toTransform);
- do {
- TGeoVolume *transformed = 0; // this will be in fact TGeoVolumeAssembly
- if (toTransform)
- transformed = TGeoVolumeAssembly::MakeAssemblyFromVolume(toTransform);
- if (transformed)
- gGeoManager->ReplaceVolume(toTransform, transformed);
- index++;
- toTransform = (TGeoVolume*)list->At(index);
- }
- while (strcmp(spdLaddName, toTransform->GetName()) == 0);
- }
-
- //---
-
- // SPD 1
- if (! AliITSInitGeometry::SPDIsTGeoNative()) {
- char spdLaddName[20] = "I107"; // "I107"
-
- TGeoVolume *toTransform = gGeoManager->FindVolumeFast(spdLaddName);
- Int_t index = list->IndexOf(toTransform);
- do {
- TGeoVolume *transformed = 0; // this will be in fact TGeoVolumeAssembly
- if (toTransform)
- transformed = TGeoVolumeAssembly::MakeAssemblyFromVolume(toTransform);
- if (transformed)
- gGeoManager->ReplaceVolume(toTransform, transformed);
- index++;
- toTransform = (TGeoVolume*)list->At(index);
- }
- while (strcmp(spdLaddName,toTransform->GetName()) == 0);
- }
-
- // SPD 2
- if (! AliITSInitGeometry::SPDIsTGeoNative()) {
- char spdLaddName[20] = "I1D7"; // "I1D7"
-
- TGeoVolume *toTransform = gGeoManager->FindVolumeFast(spdLaddName);
- Int_t index = list->IndexOf(toTransform);
- do {
- TGeoVolume *transformed = 0; // this will be in fact TGeoVolumeAssembly
- if (toTransform)
- transformed = TGeoVolumeAssembly::MakeAssemblyFromVolume(toTransform);
- if (transformed)
- gGeoManager->ReplaceVolume(toTransform, transformed);
- index++;
- toTransform = (TGeoVolume*)list->At(index);
- }
- while (strcmp(spdLaddName, toTransform->GetName()) == 0);
- }
-
- // SDD 1
- if (! AliITSInitGeometry::SDDIsTGeoNative()) {
- char sddLaddName[20] = "I004";// "I302"
-
- TGeoVolume *toTransform = gGeoManager->FindVolumeFast(sddLaddName);
- Int_t index = list->IndexOf(toTransform);
- do {
- TGeoVolume *transformed = 0; // this will be in fact TGeoVolumeAssembly
- if (toTransform)
- transformed = TGeoVolumeAssembly::MakeAssemblyFromVolume(toTransform);
- if (transformed)
- gGeoManager->ReplaceVolume(toTransform, transformed);
- index++;
- toTransform = (TGeoVolume*)list->At(index);
- }
- while (strcmp(sddLaddName, toTransform->GetName()) == 0);
- }
-
- // SDD 2
- if (! AliITSInitGeometry::SDDIsTGeoNative()) {
- char sddLaddName[20] = "I005";// "I402"
-
- TGeoVolume *toTransform = gGeoManager->FindVolumeFast(sddLaddName);
- Int_t index = list->IndexOf(toTransform);
- do {
- TGeoVolume *transformed = 0; // this will be in fact TGeoVolumeAssembly
- if (toTransform)
- transformed = TGeoVolumeAssembly::MakeAssemblyFromVolume(toTransform);
- if (transformed)
- gGeoManager->ReplaceVolume(toTransform, transformed);
- index++;
- toTransform = (TGeoVolume*)list->At(index);
- }
- while (strcmp(sddLaddName, toTransform->GetName()) == 0);
- }
-
-
- // SSD 1
- if (! AliITSInitGeometry::SSDIsTGeoNative()) {
- char ssdLaddName[20] = "I565";// "I562"
-
- TGeoVolume *toTransform = gGeoManager->FindVolumeFast(ssdLaddName);
- Int_t index = list->IndexOf(toTransform);
- do {
- TGeoVolume *transformed = 0; // this will be in fact TGeoVolumeAssembly
- if (toTransform)
- transformed = TGeoVolumeAssembly::MakeAssemblyFromVolume(toTransform);
- if (transformed)
- gGeoManager->ReplaceVolume(toTransform, transformed);
- index++;
- toTransform = (TGeoVolume*)list->At(index);
- }
- while (strcmp(ssdLaddName,toTransform->GetName()) == 0);
- }
-
- // SSD 2
- if (! AliITSInitGeometry::SSDIsTGeoNative()) {
- char ssdLaddName[20] = "I569";// "I566"
-
- TGeoVolume *toTransform = gGeoManager->FindVolumeFast(ssdLaddName);
- Int_t index = list->IndexOf(toTransform);
- do {
- TGeoVolume *transformed = 0; // this will be in fact TGeoVolumeAssembly
- if (toTransform)
- transformed = TGeoVolumeAssembly::MakeAssemblyFromVolume(toTransform);
- if (transformed)
- gGeoManager->ReplaceVolume(toTransform, transformed);
- index++;
- toTransform = (TGeoVolume*)list->At(index);
- }
- while (strcmp(ssdLaddName, toTransform->GetName()) == 0);
- }
-
-
- //====== Converting some virtual volumes to assemblies in order
- //====== to avoid overlaps :
-
- if (! AliITSInitGeometry::SDDIsTGeoNative()) {
- char sddName[20] = "I047";
-
- TGeoVolume *toTransform = gGeoManager->FindVolumeFast(sddName);
- Int_t index = list->IndexOf(toTransform);
- do {
- TGeoVolume *transformed = 0; // this will be in fact TGeoVolumeAssembly
- if (toTransform)
- transformed = TGeoVolumeAssembly::MakeAssemblyFromVolume(toTransform);
- if (transformed)
- gGeoManager->ReplaceVolume(toTransform, transformed);
- index++;
- toTransform = (TGeoVolume*)list->At(index);
- }
- while (strcmp(sddName, toTransform->GetName()) == 0);
- }
-
- if (! AliITSInitGeometry::SDDIsTGeoNative()) {
- char sddName[20] = "I048";
-
- TGeoVolume *toTransform = gGeoManager->FindVolumeFast(sddName);
- Int_t index = list->IndexOf(toTransform);
- do {
- TGeoVolume *transformed = 0; // this will be in fact TGeoVolumeAssembly
- if (toTransform)
- transformed = TGeoVolumeAssembly::MakeAssemblyFromVolume(toTransform);
- if (transformed)
- gGeoManager->ReplaceVolume(toTransform, transformed);
- index++;
- toTransform = (TGeoVolume*)list->At(index);
- }
- while (strcmp(sddName, toTransform->GetName()) == 0);
- }
-
- if (! AliITSInitGeometry::SDDIsTGeoNative()) {
- char sddName[20] = "I018";
-
- TGeoVolume *toTransform = gGeoManager->FindVolumeFast(sddName);
- Int_t index = list->IndexOf(toTransform);
- do {
- TGeoVolume *transformed = 0; // this will be in fact TGeoVolumeAssembly
- if (toTransform)
- transformed = TGeoVolumeAssembly::MakeAssemblyFromVolume(toTransform);
- if (transformed)
- gGeoManager->ReplaceVolume(toTransform, transformed);
- index++;
- toTransform = (TGeoVolume*)list->At(index);
- }
- while (strcmp(sddName, toTransform->GetName()) == 0);
- }
- }
-}
-//______________________________________________________________________
-void AliITSv11Hybrid::CreateMaterials(){
- // Create ITS materials
- // This function defines the default materials used in the Geant
- // Monte Carlo simulations for the geometries AliITSv1, AliITSv3,
- // AliITSv11Hybrid.
- // In general it is automatically replaced by
- // the CreateMaterials routine defined in AliITSv?. Should the function
- // CreateMaterials not exist for the geometry version you are using this
- // one is used. See the definition found in AliITSv5 or the other routine
- // for a complete definition.
- // Inputs:
- // none.
- // Outputs:
- // none.
- // Return:
- // none.
-
- Int_t ifield = ((AliMagF*)TGeoGlobalMagField::Instance()->GetField())->Integ();
- Float_t fieldm = ((AliMagF*)TGeoGlobalMagField::Instance()->GetField())->Max();
-
- Float_t tmaxfd = 0.1; // 1.0; // Degree
- Float_t stemax = 1.0; // cm
- Float_t deemax = 0.1; // 30.0; // Fraction of particle's energy 0<deemax<=1
- Float_t epsil = 1.0E-4; // 1.0; // cm
- Float_t stmin = 0.0; // cm "Default value used"
-
- Float_t tmaxfdSi = 0.1; // .10000E+01; // Degree
- Float_t stemaxSi = 0.0075; // .10000E+01; // cm
- Float_t deemaxSi = 0.1; // 0.30000E-02; // Fraction of particle's energy 0<deemax<=1
- Float_t epsilSi = 1.0E-4;// .10000E+01;
- Float_t stminSi = 0.0; // cm "Default value used"
-
- Float_t tmaxfdAir = 0.1; // .10000E+01; // Degree
- Float_t stemaxAir = .10000E+01; // cm
- Float_t deemaxAir = 0.1; // 0.30000E-02; // Fraction of particle's energy 0<deemax<=1
- Float_t epsilAir = 1.0E-4;// .10000E+01;
- Float_t stminAir = 0.0; // cm "Default value used"
-
- Float_t tmaxfdServ = 1.0; // 10.0; // Degree
- Float_t stemaxServ = 1.0; // 0.01; // cm
- Float_t deemaxServ = 0.5; // 0.1; // Fraction of particle's energy 0<deemax<=1
- Float_t epsilServ = 1.0E-3; // 0.003; // cm
- Float_t stminServ = 0.0; //0.003; // cm "Default value used"
-
- // Freon PerFluorobuthane C4F10 see
- // http://st-support-cooling-electronics.web.cern.ch/
- // st-support-cooling-electronics/default.htm
- Float_t afre[2] = { 12.011,18.9984032 };
- Float_t zfre[2] = { 6., 9. };
- Float_t wfre[2] = { 4.,10. };
- Float_t densfre = 1.52;
-
-
- //CM55J
-
- Float_t aCM55J[4]={12.0107,14.0067,15.9994,1.00794};
- Float_t zCM55J[4]={6.,7.,8.,1.};
- Float_t wCM55J[4]={0.908508078,0.010387573,0.055957585,0.025146765};
- Float_t dCM55J = 1.8;
-
- //ALCM55J
-
- Float_t aALCM55J[5]={12.0107,14.0067,15.9994,1.00794,26.981538};
- Float_t zALCM55J[5]={6.,7.,8.,1.,13.};
- Float_t wALCM55J[5]={0.817657902,0.0093488157,0.0503618265,0.0226320885,0.1};
- Float_t dALCM55J = 1.9866;
-
- //Si Chips
-
- Float_t aSICHIP[6]={12.0107,14.0067,15.9994,1.00794,28.0855,107.8682};
- Float_t zSICHIP[6]={6.,7.,8.,1.,14., 47.};
- Float_t wSICHIP[6]={0.039730642,0.001396798,0.01169634,0.004367771,0.844665,0.09814344903};
- Float_t dSICHIP = 2.36436;
-
- //Inox
-
- Float_t aINOX[9]={12.0107,54.9380, 28.0855,30.9738,32.066,58.6928,51.9961,95.94,55.845};
- Float_t zINOX[9]={6.,25.,14.,15.,16., 28.,24.,42.,26.};
- Float_t wINOX[9]={0.0003,0.02,0.01,0.00045,0.0003,0.12,0.17,0.025,0.654};
- Float_t dINOX = 8.03;
-
- //AISI 304 L (from F.Tosello's web page - M.S. 18 Oct 10)
-
- Float_t a304L[8]={12.0107,54.9380, 28.0855,30.9738,32.066,58.6928,51.9961,55.845};
- Float_t z304L[8]={6.,25.,14.,15.,16., 28.,24.,26.};
- Float_t w304L[8]={0.0003,0.02,0.01,0.00045,0.003,0.0925,0.19,0.6865};
- Float_t d304L = 8.03;
-
- //SDD HV microcable
-
- Float_t aHVm[5]={12.0107,1.00794,14.0067,15.9994,26.981538};
- Float_t zHVm[5]={6.,1.,7.,8.,13.};
- Float_t wHVm[5]={0.520088819984,0.01983871336,0.0551367996,0.157399667056, 0.247536};
- Float_t dHVm = 1.6087;
-
- //SDD LV+signal cable
-
- Float_t aLVm[5]={12.0107,1.00794,14.0067,15.9994,26.981538};
- Float_t zLVm[5]={6.,1.,7.,8.,13.};
- Float_t wLVm[5]={0.21722436468,0.0082859922,0.023028867,0.06574077612, 0.68572};
- Float_t dLVm = 2.1035;
-
- //SDD hybrid microcab
-
- Float_t aHLVm[5]={12.0107,1.00794,14.0067,15.9994,26.981538};
- Float_t zHLVm[5]={6.,1.,7.,8.,13.};
- Float_t wHLVm[5]={0.24281879711,0.00926228815,0.02574224025,0.07348667449, 0.64869};
- Float_t dHLVm = 2.0502;
-
- //SDD anode microcab
-
- Float_t aALVm[5]={12.0107,1.00794,14.0067,15.9994,26.981538};
- Float_t zALVm[5]={6.,1.,7.,8.,13.};
- Float_t wALVm[5]={0.392653705471,0.0128595919215,0.041626868025,0.118832707289, 0.431909};
- Float_t dALVm = 2.0502;
-
- //X7R capacitors - updated from F.Tosello's web page - M.S. 18 Oct 10
-
- Float_t aX7R[6]={137.327,47.867,15.9994,58.6928,63.5460,118.710};
- Float_t zX7R[6]={56.,22.,8.,28.,29.,50.};
- Float_t wX7R[6]={0.524732,0.176736,0.179282,0.079750,0.019750,0.019750};
- Float_t dX7R = 6.07914;
-
- //X7R weld, i.e. Sn 60% Pb 40% (from F.Tosello's web page - M.S. 15 Oct 10)
-
- Float_t aX7Rweld[2]={118.71 , 207.20};
- Float_t zX7Rweld[2]={ 50. , 82. };
- Float_t wX7Rweld[2]={ 0.60 , 0.40};
- Float_t dX7Rweld = 8.52358;
-
- // AIR
-
- Float_t aAir[4]={12.0107,14.0067,15.9994,39.948};
- Float_t zAir[4]={6.,7.,8.,18.};
- Float_t wAir[4]={0.000124,0.755267,0.231781,0.012827};
- Float_t dAir = 1.20479E-3;
-
- // Water
-
- Float_t aWater[2]={1.00794,15.9994};
- Float_t zWater[2]={1.,8.};
- Float_t wWater[2]={0.111894,0.888106};
- Float_t dWater = 1.0;
-
- // CERAMICS
- // 94.4% Al2O3 , 2.8% SiO2 , 2.3% MnO , 0.5% Cr2O3
- Float_t acer[5] = { 26.981539,15.9994,28.0855,54.93805,51.9961 };
- Float_t zcer[5] = { 13., 8., 14., 25., 24. };
- Float_t wcer[5] = {.4443408,.5213375,.0130872,.0178135,.003421};
- Float_t denscer = 3.6;
-
- //G10FR4
-
- Float_t zG10FR4[14] = {14.00, 20.00, 13.00, 12.00, 5.00, 22.00, 11.00, 19.00, 26.00, 9.00, 8.00, 6.00, 7.00, 1.00};
- Float_t aG10FR4[14] = {28.0855000,40.0780000,26.9815380,24.3050000,10.8110000,47.8670000,22.9897700,39.0983000,55.8450000,18.9984000,15.9994000,12.0107000,14.0067000,1.0079400};
- Float_t wG10FR4[14] = {0.15144894,0.08147477,0.04128158,0.00904554,0.01397570,0.00287685,0.00445114,0.00498089,0.00209828,0.00420000,0.36043788,0.27529426,0.01415852,0.03427566};
- Float_t densG10FR4= 1.8;
-
- //--- EPOXY --- C18 H19 O3
- Float_t aEpoxy[3] = {15.9994, 1.00794, 12.0107} ;
- Float_t zEpoxy[3] = { 8., 1., 6.} ;
- Float_t wEpoxy[3] = { 3., 19., 18.} ;
- Float_t dEpoxy = 1.8 ;
-
- // rohacell: C9 H13 N1 O2
- Float_t arohac[4] = {12.01, 1.01, 14.010, 16.};
- Float_t zrohac[4] = { 6., 1., 7., 8.};
- Float_t wrohac[4] = { 14., 10., 2., 6.};
- Float_t drohac = 0.052;
-
- // If he/she means stainless steel (inox) + Aluminium and Zeff=15.3383 then
-//
-// %Al=81.6164 %inox=100-%Al
-
- Float_t aInAl[5] = {27., 55.847,51.9961,58.6934,28.0855 };
- Float_t zInAl[5] = {13., 26.,24.,28.,14. };
- Float_t wInAl[5] = {.816164, .131443,.0330906,.0183836,.000919182};
- Float_t dInAl = 3.075;
-
- // Aluminum alloy with 12% Copper - 21 Oct 10
-
- Float_t aAlCu12[2] = {26.9815, 63.546};
- Float_t zAlCu12[2] = {13. , 29. };
- Float_t wAlCu12[2] = { 0.88 , 0.12 };
- Float_t dAlCu12 = 2.96;
-
- // Kapton
-
- Float_t aKapton[4]={1.00794,12.0107, 14.010,15.9994};
- Float_t zKapton[4]={1.,6.,7.,8.};
- Float_t wKapton[4]={0.026362,0.69113,0.07327,0.209235};
- Float_t dKapton = 1.42;
-
- // Kapton + Cu (for Pixel Bus)
-
- Float_t aKaptonCu[5]={1.00794, 12.0107, 14.010, 15.9994, 63.5460};
- Float_t zKaptonCu[5]={1., 6., 7., 8., 29.};
- Float_t wKaptonCuBus[5];
-
- // Kapton + Cu (for Pixel MCM)
-
- Float_t wKaptonCuMCM[5];
-
- // Kapton + Cu (mix of two above)
-
- Float_t wKaptonCuMix[5];
-
- //SDD ruby sph.
- Float_t aAlOxide[2] = { 26.981539,15.9994};
- Float_t zAlOxide[2] = { 13., 8.};
- Float_t wAlOxide[2] = {0.4707, 0.5293};
- Float_t dAlOxide = 3.97;
-
- // Silica for optical fibers: Si O2
- Float_t aoptfib[2] = { 28.0855, 15.9994};
- Float_t zoptfib[2] = { 14., 8. };
- Float_t woptfib[2] = { 1., 2. };
- Float_t doptfib = 2.55;
-
- // Tetrafluorethylene-Perfluorpropylene (FEP) - 08 Mar 10
- Float_t aFEP[2] = { 12.0107, 18.9984};
- Float_t zFEP[2] = { 6. , 9. };
- Float_t wFEP[2] = { 1. , 2. };
- Float_t dFEP = 2.15;
-
- // PVC (C2H3Cl)n - 08 Jul 10
- Float_t aPVC[3] = { 12.0107, 1.00794, 35.4527};
- Float_t zPVC[3] = { 6. , 1. , 35. };
- Float_t wPVC[3] = { 2. , 3. , 1. };
- Float_t dPVC = 1.3;
-
- // PBT (Polybutylene terephthalate = C12-H12-O4) - 01 Sep 10
- Float_t aPBT[3] = { 12.0107, 1.00794, 15.9994};
- Float_t zPBT[3] = { 6. , 1. , 8. };
- Float_t wPBT[3] = { 12. ,12. , 4. };
- Float_t dPBT = 1.31;
-
- // POLYAX (POLYAX = C37-H24-O6-N2) - 03 Sep 10
- Float_t aPOLYAX[4] = { 12.0107, 1.00794, 15.9994, 14.00674};
- Float_t zPOLYAX[4] = { 6. , 1. , 8. , 7. };
- Float_t wPOLYAX[4] = { 37. ,24. , 6. , 2. };
- Float_t dPOLYAX = 1.27;
-
- // PPS (PPS = C6-H4-S) - 05 Sep 10
- Float_t aPPS[3] = { 12.0107, 1.00794, 32.066};
- Float_t zPPS[3] = { 6. , 1. , 16. };
- Float_t wPPS[3] = { 6. , 4. , 1. };
- Float_t dPPS = 1.35;
-
- // Megolon (Polyolefin = (C-H2)n) - 20 Oct 10
- Float_t aMegolon[2] = { 12.0107, 1.00794};
- Float_t zMegolon[2] = { 6. , 1. };
- Float_t wMegolon[2] = { 1. , 2. };
- Float_t dMegolon = 1.51; // Mean of various types
-
- // Standard glass (from glassproperties.com/glasses - M.S. 21 Oct 10)
- Float_t aStdGlass[7] = {15.9994 ,28.0855 ,22.98977 ,40.078 ,
- 24.305 ,26.981539,39.0983 };
- Float_t zStdGlass[7] = { 8. ,14. ,11. ,20. ,
- 12. ,13. ,19. };
- Float_t wStdGlass[7] = { 0.468377, 0.348239, 0.096441, 0.071469,
- 0.006030, 0.005293, 0.004151};
- Float_t dStdGlass = 2.53;
-
- // Glass Fiber (from F.Tosello's web page - M.S. 15 Oct 10)
- Float_t aGlass[11] = {15.9994 ,28.0855 ,40.078 ,26.981539,10.811 ,
- 24.305 ,39.0983 ,22.98977 ,18.9984 ,47.867 ,55.845};
- Float_t zGlass[11] = { 8. ,14. ,20 ,13 , 5 ,
- 12. ,19 ,11 , 9 ,22 ,26 };
- Float_t wGlass[11] = { 0.473610, 0.252415, 0.135791, 0.068803, 0.023293,
- 0.015076, 0.008301, 0.007419, 0.007000, 0.004795, 0.003497};
- Float_t dGlass = 2.61;
-
- // Ryton R-4 04 (from F.Tosello's web page - M.S. 15 Oct 10)
- Float_t aRyton[14] = {15.9994 ,28.0855 ,40.078 ,26.981539,10.811 ,
- 24.305 ,39.0983 ,22.98977 ,18.9984 ,47.867 ,
- 55.845 ,12.0107 , 1.00794 ,32.066 };
- Float_t zRyton[14] = { 8. ,14. ,20. ,13. , 5. ,
- 12. ,19. ,11. , 9. ,22. ,
- 26. , 6. , 1. ,16. };
- Float_t wRyton[14] = { 0.189445, 0.100966, 0.054316, 0.027521, 0.009317,
- 0.006030, 0.003320, 0.002968, 0.002800, 0.001918,
- 0.001399, 0.399760, 0.022365, 0.177875};
- Float_t dRyton = 1.65;
-
- // Plexiglas (Poly(methyl methacrylate) (C5O2H8)n - M.S. 05 nov 10)
- Float_t aPlexy[3] = { 12.0107, 15.9994, 1.00794};
- Float_t zPlexy[3] = { 6. , 8. , 1. };
- Float_t wPlexy[3] = { 5. , 2. , 8. };
- Float_t dPlexy = 1.18;
-
- //SSD NiSn capacitor ends
- Float_t aNiSn[2] = { 56.6934,118.710};
- Float_t zNiSn[2] = { 28., 50.};
- Float_t wNiSn[2] = {0.33, 0.67};
- Float_t dNiSn = wNiSn[0]*8.908 + wNiSn[1]*7.310;
-
- AliMaterial(1,"SI$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
- AliMedium(1,"SI$",1,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi);
-
- AliMaterial(2,"SPD SI CHIP$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
- AliMedium(2,"SPD SI CHIP$",2,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi);
-
- AliMaterial(3,"SPD SI BUS$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
- AliMedium(3,"SPD SI BUS$",3,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi);
-
- AliMixture(4,"C (M55J)$",aCM55J,zCM55J,dCM55J,4,wCM55J);
- AliMedium(4,"C (M55J)$",4,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- AliMixture(5,"AIR$",aAir,zAir,dAir,4,wAir);
- AliMedium(5,"AIR$",5,0,ifield,fieldm,tmaxfdAir,stemaxAir,deemaxAir,epsilAir,stminAir);
-
- AliMixture(6,"GEN AIR$",aAir,zAir,dAir,4,wAir);
- AliMedium(6,"GEN AIR$",6,0,ifield,fieldm,tmaxfdAir,stemaxAir,deemaxAir,epsilAir,stminAir);
-
- AliMixture(7,"SDD SI CHIP$",aSICHIP,zSICHIP,dSICHIP,6,wSICHIP);
- AliMedium(7,"SDD SI CHIP$",7,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi);
-
- AliMixture(9,"SDD C (M55J)$",aCM55J,zCM55J,dCM55J,4,wCM55J);
- AliMedium(9,"SDD C (M55J)$",9,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- AliMixture(10,"SDD AIR$",aAir,zAir,dAir,4,wAir);
- AliMedium(10,"SDD AIR$",10,0,ifield,fieldm,tmaxfdAir,stemaxAir,deemaxAir,epsilAir,stminAir);
-
- AliMaterial(11,"AL$",0.26982E+02,0.13000E+02,0.26989E+01,0.89000E+01,0.99900E+03);
- AliMedium(11,"AL$",11,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- AliMixture(12, "Water$",aWater,zWater,dWater,2,wWater);
- AliMedium(12,"WATER$",12,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- AliMixture(13,"Freon$",afre,zfre,densfre,-2,wfre);
- AliMedium(13,"Freon$",13,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- AliMaterial(14,"COPPER$",0.63546E+02,0.29000E+02,0.89600E+01,0.14300E+01,0.99900E+03);
- AliMedium(14,"COPPER$",14,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
- AliMixture(15,"CERAMICS$",acer,zcer,denscer,5,wcer);
- AliMedium(15,"CERAMICS$",15,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- AliMixture(20,"SSD C (M55J)$",aCM55J,zCM55J,dCM55J,4,wCM55J);
- AliMedium(20,"SSD C (M55J)$",20,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- AliMixture(21,"SSD AIR$",aAir,zAir,dAir,4,wAir);
- AliMedium(21,"SSD AIR$",21,0,ifield,fieldm,tmaxfdAir,stemaxAir,deemaxAir,epsilAir,stminAir);
-
- AliMixture(25,"G10FR4$",aG10FR4,zG10FR4,densG10FR4,14,wG10FR4);
- AliMedium(25,"G10FR4$",25,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- AliMixture(26,"GEN C (M55J)$",aCM55J,zCM55J,dCM55J,4,wCM55J);
- AliMedium(26,"GEN C (M55J)$",26,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- AliMixture(27,"GEN Air$",aAir,zAir,dAir,4,wAir);
- AliMedium(27,"GEN Air$",27,0,ifield,fieldm,tmaxfdAir,stemaxAir,deemaxAir,epsilAir,stminAir);
-
- AliMixture(35,"PLEXYGLAS$",aPlexy,zPlexy,dPlexy,-3,wPlexy);
- AliMedium(35,"PLEXYGLAS$",35,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- AliMixture(36,"STDGLASS$",aStdGlass,zStdGlass,dStdGlass,7,wStdGlass);
- AliMedium(36,"STDGLASS$",36,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- AliMixture(37,"ALCU12$",aAlCu12,zAlCu12,dAlCu12,2,wAlCu12);
- AliMedium(37,"ALCU12$",37,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- AliMixture(38,"MEGOLON$",aMegolon,zMegolon,dMegolon,-2,wMegolon);
- AliMedium(38,"MEGOLON$",38,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- AliMixture(39,"RYTON$",aRyton,zRyton,dRyton,14,wRyton);
- AliMedium(39,"RYTON$",39,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- AliMixture(40,"GLASS FIBER$",aGlass,zGlass,dGlass,11,wGlass);
- AliMedium(40,"GLASS FIBER$",40,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- AliMixture(41,"AISI304L$",a304L,z304L,d304L,8,w304L);
- AliMedium(41,"AISI304L$",41,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- AliMaterial(42,"NICKEL$",0.58693E+02,0.28000E+02,0.89080E+01,0.14200E+01,0.99900E+03);
- AliMedium(42,"NICKEL$",42,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- AliMixture(43,"SDD X7R weld$",aX7Rweld,zX7Rweld,dX7Rweld,2,wX7Rweld);
- AliMedium(43,"SDD X7R weld$",43,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- AliMixture(44,"PPS$",aPPS,zPPS,dPPS,-3,wPPS);
- AliMedium(44,"PPS$",44,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- AliMixture(45,"POLYAX$",aPOLYAX,zPOLYAX,dPOLYAX,-4,wPOLYAX);
- AliMedium(45,"POLYAX$",45,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- AliMixture(46,"PBT$",aPBT,zPBT,dPBT,-3,wPBT);
- AliMedium(46,"PBT$",46,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- AliMixture(47,"PVC$",aPVC,zPVC,dPVC,-3,wPVC);
- AliMedium(47,"PVC$",47,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- Double_t cuFrac = 0.56;
- Double_t kFrac = 1.0 - cuFrac;
- Double_t cuDens = 8.96;
- Float_t dKaptonCuBus = cuFrac * cuDens + kFrac * dKapton;
- for (Int_t j=0; j<4; j++)
- wKaptonCuBus[j] = wKapton[j]*kFrac;
- wKaptonCuBus[4] = cuFrac;
- AliMixture(48, "SPD-BUS CU KAPTON", aKaptonCu, zKaptonCu, dKaptonCuBus, 5, wKaptonCuBus);
- AliMedium(48,"SPD-BUS CU KAPTON$",48,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- cuFrac = 0.5;
- kFrac = 1.0 - cuFrac;
- Float_t dKaptonCuMCM = cuFrac * cuDens + kFrac * dKapton;
- for (Int_t j=0; j<4; j++)
- wKaptonCuMCM[j] = wKapton[j]*kFrac;
- wKaptonCuMCM[4] = cuFrac;
- AliMixture(49, "SPD-MCM CU KAPTON", aKaptonCu, zKaptonCu, dKaptonCuMCM, 5, wKaptonCuMCM);
- AliMedium(49,"SPD-MCM CU KAPTON$",49,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- cuFrac = (0.56 + 0.5) / 2.0;
- kFrac = 1.0 - cuFrac;
- Float_t dKaptonCuMix = cuFrac * cuDens + kFrac * dKapton;
- for (Int_t j=0; j<4; j++)
- wKaptonCuMix[j] = wKapton[j]*kFrac;
- wKaptonCuMix[4] = cuFrac;
- AliMixture(50, "SPD-MIX CU KAPTON", aKaptonCu, zKaptonCu, dKaptonCuMix, 5, wKaptonCuMix);
- AliMedium(50,"SPD-MIX CU KAPTON$",50,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- AliMaterial(51,"SPD SI$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
- AliMedium(51,"SPD SI$",51,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi);
-
- AliMaterial(52,"SPD SI CHIP$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
- AliMedium(52,"SPD SI CHIP$",52,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi);
-
- AliMaterial(53,"SPD SI BUS$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
- AliMedium(53,"SPD SI BUS$",53,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi);
-
- AliMixture(54,"SPD C (M55J)$",aCM55J,zCM55J,dCM55J,4,wCM55J);
- AliMedium(54,"SPD C (M55J)$",54,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- AliMixture(55,"SPD AIR$",aAir,zAir,dAir,4,wAir);
- AliMedium(55,"SPD AIR$",55,0,ifield,fieldm,tmaxfdAir,stemaxAir,deemaxAir,epsilAir,stminAir);
-
- AliMixture(56, "SPD KAPTON(POLYCH2)", aKapton, zKapton, dKapton, 4, wKapton);
- AliMedium(56,"SPD KAPTON(POLYCH2)$",56,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- // Gaseous Freon has same chemical composition but air density at 1.7 atm
- AliMixture(59,"GASEOUS FREON$",afre,zfre,1.7*dAir,-2,wfre);
- AliMedium(59,"GASEOUS FREON$",59,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- AliMixture(61,"EPOXY$",aEpoxy,zEpoxy,dEpoxy,-3,wEpoxy);
- AliMedium(61,"EPOXY$",61,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- AliMaterial(62,"SILICON$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
- AliMedium(62,"SILICON$",62,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi);
-
- AliMixture(63, "KAPTONH(POLYCH2)", aKapton, zKapton, dKapton, 4, wKapton);
- AliMedium(63,"KAPTONH(POLYCH2)$",63,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- AliMaterial(64,"ALUMINUM$",0.26982E+02,0.13000E+02,0.26989E+01,0.89000E+01,0.99900E+03);
- AliMedium(64,"ALUMINUM$",64,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- AliMixture(65,"INOX$",aINOX,zINOX,dINOX,9,wINOX);
- AliMedium(65,"INOX$",65,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- AliMixture(66,"NiSn$",aNiSn,zNiSn,dNiSn,2,wNiSn);
- AliMedium(66,"NiSn$",66,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- AliMaterial(67,"Sn$", 118.710, 50., 7.310, 1.206, 999.);
- AliMedium(67,"Sn$",67,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- AliMixture(68,"ROHACELL$",arohac,zrohac,drohac,-4,wrohac);
- AliMedium(68,"ROHACELL$",68,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- AliMixture(69,"SDD C AL (M55J)$",aALCM55J,zALCM55J,dALCM55J,5,wALCM55J);
- AliMedium(69,"SDD C AL (M55J)$",69,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- AliMixture(70, "SDDKAPTON (POLYCH2)", aKapton, zKapton, dKapton, 4, wKapton);
- AliMedium(70,"SDDKAPTON (POLYCH2)$",70,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- AliMaterial(71,"ITS SANDW A$",0.12011E+02,0.60000E+01,0.2115E+00,0.17479E+03,0.99900E+03);
- AliMedium(71,"ITS SANDW A$",71,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- AliMaterial(72,"ITS SANDW B$",0.12011E+02,0.60000E+01,0.27000E+00,0.18956E+03,0.99900E+03);
- AliMedium(72,"ITS SANDW B$",72,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- AliMaterial(73,"ITS SANDW C$",0.12011E+02,0.60000E+01,0.41000E+00,0.90868E+02,0.99900E+03);
- AliMedium(73,"ITS SANDW C$",73,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- AliMaterial(74,"HEAT COND GLUE$",0.12011E+02,0.60000E+01,0.1930E+01,0.22100E+02,0.99900E+03);
- AliMedium(74,"HEAT COND GLUE$",74,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- AliMaterial(75,"ELASTO SIL$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
- AliMedium(75,"ELASTO SIL$",75,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- // SPD bus (data from Petra Riedler)
- Float_t aSPDbus[5] = {1.00794,12.0107,14.01,15.9994,26.982 };
- Float_t zSPDbus[5] = {1.,6.,7.,8.,13.};
- Float_t wSPDbus[5] = {0.023523,0.318053,0.009776,0.078057,0.570591};
- Float_t dSPDbus = 2.128505;
-
- // AliMaterial(76,"SPDBUS(AL+KPT+EPOX)$",0.19509E+02,0.96502E+01,0.19060E+01,0.15413E+02,0.99900E+03);
- AliMixture(76,"SPDBUS(AL+KPT+EPOX)$",aSPDbus,zSPDbus,dSPDbus,5,wSPDbus);
- AliMedium(76,"SPDBUS(AL+KPT+EPOX)$",76,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- AliMixture(77,"SDD X7R capacitors$",aX7R,zX7R,dX7R,6,wX7R);
- AliMedium(77,"SDD X7R capacitors$",77,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- AliMixture(78,"SDD ruby sph. Al2O3$",aAlOxide,zAlOxide,dAlOxide,2,wAlOxide);
- AliMedium(78,"SDD ruby sph. Al2O3$",78,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- AliMaterial(79,"SDD SI insensitive$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
- AliMedium(79,"SDD SI insensitive$",79,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- AliMixture(80,"SDD HV microcable$",aHVm,zHVm,dHVm,5,wHVm);
- AliMedium(80,"SDD HV microcable$",80,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- AliMixture(81,"SDD LV+signal cable$",aLVm,zLVm,dLVm,5,wLVm);
- AliMedium(81,"SDD LV+signal cable$",81,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- AliMixture(82,"SDD hybrid microcab$",aHLVm, zHLVm,dHLVm,5,wHLVm);
- AliMedium(82,"SDD hybrid microcab$",82,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- AliMixture(83,"SDD anode microcab$",aALVm,zALVm,dALVm,5,wALVm);
- AliMedium(83,"SDD anode microcab$",83,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
- Float_t aDSring[4]={12.0107, 1.00794, 14.0067, 15.9994};
- Float_t zDSring[4]={ 6., 1., 7., 8.};
- Float_t wDSring[4]={ 0.854323888, 0.026408778, 0.023050265, 0.096217069};
- Float_t dDSring = 0.2875;
- AliMixture(84,"SDD/SSD rings$",aDSring,zDSring,dDSring,4,wDSring);
- AliMedium(84,"SDD/SSD rings$",84,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- AliMixture(85,"inox/alum$",aInAl,zInAl,dInAl,5,wInAl);
- AliMedium(85,"inox/alum$",85,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- // special media to take into account services in the SDD and SSD
- // cones for the FMD
- //Begin_Html
- /*
- <A HREF="http://www.Physics.ohio-state.edu/~nilsen/ITS/ITS_MatBudget_4B.xls">
- </pre>
- <br clear=left>
- <font size=+2 color=blue>
- <p> The Exel spread sheet from which these density number come from.
- </font></A>
- */
- //End_Html
-
- // AliMaterial(86,"AIRFMDSDD$",0.14610E+02,0.73000E+01,0.12050E-02,0.30423E+05,0.99900E+03);
- Float_t aA[13],zZ[13],wW[13],den;
- // From Pierluigi Barberis calculations of 2SPD+1SDD October 2 2002.
- zZ[0] = 1.0; aA[0] = 1.00794; // Hydrogen
- zZ[1] = 6.0; aA[1] = 12.011; // Carbon
- zZ[2] = 7.0; aA[2] = 14.00674; // Nitrogen
- zZ[3] = 8.0; aA[3] = 15.9994; // Oxigen
- zZ[4] = 14.0; aA[4] = 28.0855; // Silicon
- zZ[5] = 24.0; aA[5] = 51.9961; //Cromium
- zZ[6] = 25.0; aA[6] = 54.938049; // Manganese
- zZ[7] = 26.0; aA[7] = 55.845; // Iron
- zZ[8] = 28.0; aA[8] = 58.6934; // Nickle
- zZ[9] = 29.0; aA[9] = 63.546; // Copper
- zZ[10] = 13.0; aA[10] = 26.981539; // Alulminum
- zZ[11] = 47.0; aA[11] = 107.8682; // Silver
- zZ[12] = 27.0; aA[12] = 58.9332; // Cobolt
- wW[0] = 0.019965;
- wW[1] = 0.340961;
- wW[2] = 0.041225;
- wW[3] = 0.200352;
- wW[4] = 0.000386;
- wW[5] = 0.001467;
- wW[6] = 0.000155;
- wW[7] = 0.005113;
- wW[8] = 0.000993;
- wW[9] = 0.381262;
- wW[10] = 0.008121;
- wW[11] = 0.000000;
- wW[12] = 0.000000;
- if(fByThick){// New values seeITS_MatBudget_4B.xls
- den = 1.5253276; // g/cm^3 Cell O370
- }else{
- den = 2.58423412; // g/cm^3 Cell L370
- } // end if fByThick
- //den = 6161.7/(3671.58978);//g/cm^3 Volume does not exclude holes
- AliMixture(86,"AIRFMDSDD$",aA,zZ,den,+11,wW);
- AliMedium(86,"AIRFMDSDD$",86,0,ifield,fieldm,tmaxfdAir,stemaxAir,
- deemaxAir,epsilAir,stminAir);
-
- //AliMaterial(87,"AIRFMDSSD$",0.14610E+02,0.73000E+01,0.12050E-02,0.30423E+05,0.99900E+03);
- // From Pierluigi Barberis calculations of SSD October 2 2002.
- wW[0] = 0.019777;
- wW[1] = 0.325901;
- wW[2] = 0.031848;
- wW[3] = 0.147668;
- wW[4] = 0.030609;
- wW[5] = 0.013993;
- wW[6] = 0.001479;
- wW[7] = 0.048792;
- wW[8] = 0.009477;
- wW[9] = 0.350697;
- wW[10] = 0.014546;
- wW[11] = 0.005213;
- wW[12] = 0.000000;
- if(fByThick){// New values seeITS_MatBudget_4B.xls
- den = 1.2464275; // g/cm^3 Cell O403
- }else{
- den = 1.28134409; // g/cm^3 Cell L403
- } // end if fByThick
- //den = 7666.3/(9753.553259); // volume does not exclude holes
- AliMixture(87,"AIRFMDSSD$",aA,zZ,den,+12,wW);
- AliMedium(87,"AIRFMDSSD$",87,0,ifield,fieldm,tmaxfdAir,stemaxAir,
- deemaxAir,epsilAir,stminAir);
-
- //AliMaterial(88,"ITS SANDW CFMDSDD$",0.12011E+02,0.60000E+01,0.41000E+00,0.90868E+02,0.99900E+03);
- // From Pierluigi Barberis calculations of 1SDD+Carbon fiber October 2 2002
- wW[0] = 0.016302;
- wW[1] = 0.461870;
- wW[2] = 0.033662;
- wW[3] = 0.163595;
- wW[4] = 0.000315;
- wW[5] = 0.001197;
- wW[6] = 0.000127;
- wW[7] = 0.004175;
- wW[8] = 0.000811;
- wW[9] = 0.311315;
- wW[10] = 0.006631;
- wW[11] = 0.000000;
- wW[12] = 0.000000;
- if(fByThick){// New values seeITS_MatBudget_4B.xls
- den = 1.9353276; // g/cm^3 Cell N370
- }else{
- den = 3.2788626; // g/cm^3 Cell F370
- } // end if fByThick
- //den = 7667.1/(3671.58978); // Volume does not excludeholes
- AliMixture(88,"ITS SANDW CFMDSDD$",aA,zZ,den,+11,wW);
- AliMedium(88,"ITS SANDW CFMDSDD$",88,0,ifield,fieldm,tmaxfd,stemax,
- deemax,epsil,stmin);
-
- //AliMaterial(89,"ITS SANDW CFMDSSD$",0.12011E+02,0.60000E+01,0.41000E+00,0.90868E+02,0.99900E+03);
- // From Pierluigi Barberis calculations of SSD+Carbon fiber October 2 2002.
- wW[0] = 0.014065;
- wW[1] = 0.520598;
- wW[2] = 0.022650;
- wW[3] = 0.105018;
- wW[4] = 0.021768;
- wW[5] = 0.009952;
- wW[6] = 0.001051;
- wW[7] = 0.034700;
- wW[8] = 0.006740;
- wW[9] = 0.249406;
- wW[10] = 0.010345;
- wW[11] = 0.0003707;
- wW[12] = 0.000000;
- if(fByThick){// New values seeITS_MatBudget_4B.xls
- den = 1.6564275; // g/cm^3 Cell N304
- }else{
- den = 1.7028296; // g/cm^3 Cell F304
- } // end if fByThick
- //den = 1166.5/(3671.58978); // Volume does not exclude holes
- AliMixture(89,"ITS SANDW CFMDSSD$",aA,zZ,den,+12,wW);
- AliMedium(89,"ITS SANDW CFMDSSD$",89,0,ifield,fieldm,tmaxfd,stemax,
- deemax,epsil,stmin);
-
- //AliMaterial(97,"SPD SERVICES$",0.12011E+02,0.60000E+01,0.41000E+00,0.90868E+02,0.99900E+03);
- // From Pierluigi Barberis calculations of 1SPD October 2 2002.
- wW[0] = 0.005970;
- wW[1] = 0.304704;
- wW[2] = 0.042510;
- wW[3] = 0.121715;
- wW[4] = 0.001118;
- wW[5] = 0.030948;
- wW[6] = 0.003270;
- wW[7] = 0.107910;
- wW[8] = 0.020960;
- wW[9] = 0.360895;
- wW[10] = 0.000000;
- wW[11] = 0.000000;
- wW[12] = 0.000000;
- if(fByThick){// New values seeITS_MatBudget_4B.xls
- den = 80.31136576; // g/cm^3 Cell H329
- }else{
- den = 87.13062; // g/cm^3 Cell G329
- } // end if fByThick
- //den = 1251.3/(0.05*2.0*TMath::Pi()*(7.75*7.75 - 3.7*3.7)); // g/cm^3
- AliMixture(97,"SPD SERVICES$",aA,zZ,den,+10,wW);
- AliMedium(97,"SPD SERVICES$",97,0,ifield,fieldm,tmaxfd,stemax,
- deemax,epsil,stmin);
-
-
- // Special media
-
- AliMaterial(90,"SPD shield$", 12.011, 6., 1.93 , 22.36, 999);
- AliMedium(90,"SPD shield$",90,0,ifield,fieldm,tmaxfdServ,stemaxServ,deemaxServ,epsilServ,stminServ);
-
- // SPD End Ladder (data from Petra Riedler)
- Float_t aSPDel[5] = {1.00794,12.0107,14.01,15.9994,63.54 };
- Float_t zSPDel[5] = {1.,6.,7.,8.,29.};
- Float_t wSPDel[5] = {0.004092,0.107274,0.011438,0.032476,0.844719};
- Float_t dSPDel = 3.903403;
-
- // AliMaterial(91, "SPD End ladder$", 47.0447, 21.7963, 3.6374, 4.4711, 999);
- AliMixture(91,"SPD End ladder$",aSPDel,zSPDel,dSPDel,5,wSPDel);
- AliMedium(91,"SPD End ladder$",91,0,ifield,fieldm,tmaxfdServ,stemaxServ,deemaxServ,epsilServ,stminServ);
-
- AliMaterial(92, "SPD cone$",28.0855, 14., 2.33, 9.36, 999);
- AliMedium(92,"SPD cone$",92,0,ifield,fieldm,tmaxfdServ,stemaxServ,deemaxServ,epsilServ,stminServ);
- /* Material with fractional Z not actually used
- AliMaterial(93, "SDD End ladder$", 69.9298, 29.8246, 0.3824, 36.5103, 999);
- AliMedium(93,"SDD End ladder$",93,0,ifield,fieldm,tmaxfdServ,stemaxServ,deemaxServ,epsilServ,stminServ);
- */
- AliMaterial(94, "SDD cone$",63.546, 29., 1.15, 1.265, 999);
- AliMedium(94,"SDD cone$",94,0,ifield,fieldm,tmaxfdServ,stemaxServ,deemaxServ,epsilServ,stminServ);
- /* Material with fractional Z not actually used
- AliMaterial(95, "SSD End ladder$", 32.0988, 15.4021, 0.68, 35.3238, 999);
- AliMedium(95,"SSD End ladder$",95,0,ifield,fieldm,tmaxfdServ,stemaxServ,deemaxServ,epsilServ,stminServ);
- */
- AliMaterial(96, "SSD cone$",63.546, 29., 1.15, 1.265, 999);
- AliMedium(96,"SSD cone$",96,0,ifield,fieldm,tmaxfdServ,stemaxServ,deemaxServ,epsilServ,stminServ);
-
- AliMixture(98,"SDD OPTICFIB$",aoptfib,zoptfib,doptfib,-2,woptfib);
- AliMedium(98,"SDD OPTICFIB$",98,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- AliMixture(95,"SSD FEP$",aFEP,zFEP,dFEP,-2,wFEP);
- AliMedium(95,"SSD FEP$",95,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- // Mean material for low-voltage cables on SPD trays Side A
- // (Copper + PolyEthylene (C2-H4)) (D.Elia for cable number and
- // cross-section area, M.Sitta for elemental computation) - 26 Feb 10
- wW[0] = 0.323024;//H
- wW[2] = 0.515464;//Cu
- wW[1] = 0.161512;//C
- wW[3] = 0.000000;//O
- wW[4] = 0.000000;//S
- wW[5] = 0.000000;//F
- wW[6] = 0.000000;//Sn
- wW[7] = 0.000000;//Pb
- wW[8] = 0.000000;//Cr
- wW[9] = 0.000000;//Si
- wW[10] = 0.000000;//Ni
- wW[11] = 0.000000;//Ca
-
- den = 5.078866;
- AliMixture(60,"SPD_LOWCABLES$",aA,zZ,den,+3,wW);
- AliMedium(60,"SPD_LOWCABLES$",60,0,ifield,fieldm,tmaxfd,stemax,
- deemax,epsil,stmin);
-
- // Mean material for high-voltage cables on SPD trays Side A & C
- // (Copper + HD PolyEthylene (C2-H2)) (D.Elia for cable number and
- // cross-section area, M.Sitta for elemental computation) - 10 Jun 10
- wW[0] = 0.083766;//H
- wW[2] = 0.417136;//Cu
- wW[1] = 0.499098;//C
- wW[3] = 0.000000;//O
- wW[4] = 0.000000;//S
- wW[5] = 0.000000;//F
- wW[6] = 0.000000;//Sn
- wW[7] = 0.000000;//Pb
- wW[8] = 0.000000;//Cr
- wW[9] = 0.000000;//Si
- wW[10] = 0.000000;//Ni
- wW[11] = 0.000000;//Ca
-
- den = 1.514930;
- AliMixture(58,"SPD_HICABLES$",aA,zZ,den,+3,wW);
- AliMedium(58,"SPD_HICABLES$",58,0,ifield,fieldm,tmaxfd,stemax,
- deemax,epsil,stmin);
-
- // PolyUrethane [C25-H42-N2-O6] - 07 Mar 10
- zZ[2] = 7.0; aA[2] = 14.0067; // Nitrogen - From Root TGeoElementTable
-
- wW[0] = 0.090724;//H
- wW[2] = 0.060035;//N
- wW[1] = 0.643513;//C
- wW[3] = 0.205728;//O
- wW[4] = 0.000000;//S
- wW[5] = 0.000000;//F
- wW[6] = 0.000000;//Sn
- wW[7] = 0.000000;//Pb
- wW[8] = 0.000000;//Cr
- wW[9] = 0.000000;//Si
- wW[10] = 0.000000;//Ni
- wW[11] = 0.000000;//Ca
-
- den = 1.158910;
- AliMixture(67,"POLYURETHANE$",aA,zZ,den,+4,wW);
- AliMedium(67,"POLYURETHANE$",67,0,ifield,fieldm,tmaxfd,stemax,
- deemax,epsil,stmin);
-
- // POM (Polyoxymethylene = (CH2O)n ) - 02 May 10
- zZ[2] = 8.0; aA[2] = 15.9994; // Oxigen
-
- wW[0] = 0.067137;//H
- wW[1] = 0.400016;//C
- wW[2] = 0.532847;//O
- wW[3] = 0.000000;//O
- wW[4] = 0.000000;//S
- wW[5] = 0.000000;//F
- wW[6] = 0.000000;//Sn
- wW[7] = 0.000000;//Pb
- wW[8] = 0.000000;//Cr
- wW[9] = 0.000000;//Si
- wW[10] = 0.000000;//Ni
- wW[11] = 0.000000;//Ca
-
- den = 1.4200;
- AliMixture(57,"POLYOXYMETHYLENE$",aA,zZ,den,+3,wW);
- AliMedium(57,"POLYOXYMETHYLENE$",57,0,ifield,fieldm,tmaxfd,stemax,
- deemax,epsil,stmin);
-
-
- // Anticorodal (Aliminum alloy) - 08 nov 10
- // A,Z from Root TGeoElementTable, W from Web sites
- zZ[0] = 13.0; aA[0] = 26.9815; // Aluminium
- zZ[1] = 29.0; aA[1] = 63.546 ; // Copper
- zZ[2] = 26.0; aA[2] = 55.845 ; // Iron
- zZ[3] = 25.0; aA[3] = 54.938 ; // Manganese
- zZ[4] = 12.0; aA[4] = 24.305 ; // Magnesium
- zZ[5] = 14.0; aA[5] = 28.0855; // Silicon
- zZ[6] = 30.0; aA[6] = 65.39 ; // Zinc
- zZ[7] = 24.0; aA[7] = 51.9961; // Chromium
- zZ[8] = 22.0; aA[8] = 47.867 ; // Titanium
-
- wW[1] = 0.001000;//Cu
- wW[2] = 0.005000;//Fe
- wW[3] = 0.007000;//Mn - mean value
- wW[4] = 0.009000;//Mg - mean value
- wW[5] = 0.001000;//Si - mean value
- wW[6] = 0.002000;//Zn
- wW[7] = 0.002500;//Cr
- wW[8] = 0.001000;//Ti
-
- Double_t totFrac = 0;
- for (Int_t j=1; j<9; j++)
- totFrac += wW[j];
- wW[0] = 1. - totFrac;//Al - the remainder
-
- den = 2.69;
- AliMixture(93,"ANTICORODAL$",aA,zZ,den,+9,wW);
- AliMedium(93,"ANTICORODAL$",93,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- // Hokotol (another Aluminium alloy) - 08 nov 10
- // A,Z from Root TGeoElementTable, W from Web sites
- zZ[0] = 13.0; aA[0] = 26.9815; // Aluminium
- zZ[1] = 29.0; aA[1] = 63.546 ; // Copper
- zZ[2] = 26.0; aA[2] = 55.845 ; // Iron
- zZ[3] = 25.0; aA[3] = 54.938 ; // Manganese
- zZ[4] = 12.0; aA[4] = 24.305 ; // Magnesium
- zZ[5] = 14.0; aA[5] = 28.0855; // Silicon
- zZ[6] = 30.0; aA[6] = 65.39 ; // Zinc
- zZ[7] = 24.0; aA[7] = 51.9961; // Chromium
- zZ[8] = 22.0; aA[8] = 47.867 ; // Titanium
- zZ[9] = 40.0; aA[9] = 91.224 ; // Zirconium
-
- wW[1] = 0.020500;//Cu - mean value
- wW[2] = 0.000300;//Fe
- wW[3] = 0.022000;//Mn - mean value
- wW[4] = 0.001000;//Mg - mean value
- wW[5] = 0.002000;//Si - mean value
- wW[6] = 0.066500;//Zn
- wW[7] = 0.005000;//Cr
- wW[8] = 0.000600;//Ti
- wW[9] = 0.001650;//Zr - mean value
-
- totFrac = 0;
- for (Int_t j=1; j<10; j++)
- totFrac += wW[j];
- wW[0] = 1. - totFrac;//Al - the remainder
-
- den = 2.69;
- AliMixture(34,"HOKOTOL$",aA,zZ,den,+10,wW);
- AliMedium(34,"HOKOTOL$",34,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- // Ergal (7075) (yet another Aluminium alloy) - 09 nov 10
- // A,Z from Root TGeoElementTable, W from Web sites
- zZ[0] = 13.0; aA[0] = 26.9815; // Aluminium
- zZ[1] = 29.0; aA[1] = 63.546 ; // Copper
- zZ[2] = 26.0; aA[2] = 55.845 ; // Iron
- zZ[3] = 25.0; aA[3] = 54.938 ; // Manganese
- zZ[4] = 12.0; aA[4] = 24.305 ; // Magnesium
- zZ[5] = 14.0; aA[5] = 28.0855; // Silicon
- zZ[6] = 30.0; aA[6] = 65.39 ; // Zinc
- zZ[7] = 24.0; aA[7] = 51.9961; // Chromium
- zZ[8] = 22.0; aA[8] = 47.867 ; // Titanium
-
- wW[1] = 0.016000;//Cu - mean value
- wW[2] = 0.005000;//Fe
- wW[3] = 0.003000;//Mn
- wW[4] = 0.025000;//Mg - mean value
- wW[5] = 0.004000;//Si
- wW[6] = 0.056000;//Zn - mean value
- wW[7] = 0.002300;//Cr - mean value
- wW[8] = 0.002000;//Ti
-
- totFrac = 0;
- for (Int_t j=1; j<9; j++)
- totFrac += wW[j];
- wW[0] = 1. - totFrac;//Al - the remainder
-
- den = 2.69;
- AliMixture(33,"ERGAL$",aA,zZ,den,+9,wW);
- AliMedium(33,"ERGAL$",33,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
-}
-
-//______________________________________________________________________
-void AliITSv11Hybrid::Init(){
- // Initialise the ITS after it has been created.
- // Inputs:
- // none.
- // Outputs:
- // none.
- // Return:
- // none.
-
- AliDebug(1,Form("Init: Major version %d Minor version %d",fMajorVersion,
- fMinorVersion));
- UpdateInternalGeometry();
- AliITS::Init();
-
- fIDMother = gMC->VolId("ITSV"); // ITS Mother Volume ID.
-}
-
-//______________________________________________________________________
-void AliITSv11Hybrid::SetDefaults(){
- // sets the default segmentation, response, digit and raw cluster classes
- // Inputs:
- // none.
- // Outputs:
- // none.
- // Return:
- // none.
-
- if(!fDetTypeSim){
- Warning("SetDefaults","Error fDetTypeSim not defined");
- return;
- }
-
- fDetTypeSim->SetDefaults();
-
-
- if(fgkNTYPES>3){
- Warning("SetDefaults",
- "Only the four basic detector types are initialised!");
- }// end if
- return;
-}
-//______________________________________________________________________
-void AliITSv11Hybrid::StepManager(){
- // Called for every step in the ITS, then calles the AliITShit class
- // creator with the information to be recoreded about that hit.
- // The value of the macro ALIITSPRINTGEOM if set to 1 will allow the
- // printing of information to a file which can be used to create a .det
- // file read in by the routine CreateGeometry(). If set to 0 or any other
- // value except 1, the default behavior, then no such file is created nor
- // it the extra variables and the like used in the printing allocated.
- // Inputs:
- // none.
- // Outputs:
- // none.
- // Return:
- // none.
-
- if(!(this->IsActive())) return;
- if(!(gMC->TrackCharge())) return;
-
- Int_t copy, lay = 0;
- Int_t id = gMC->CurrentVolID(copy);
-
- Bool_t notSens = kFALSE;
- while ((lay<fIdN) && (notSens = id != fIdSens[lay])) ++lay;
- if (notSens) return;
-
- if(gMC->IsTrackExiting()) {
- AddTrackReference(gAlice->GetMCApp()->GetCurrentTrackNumber(), AliTrackReference::kITS);
- } // if Outer ITS mother Volume
-
- static TLorentzVector position, momentum; // Saves on calls to construtors
- static AliITShit hit;// Saves on calls to constructors
-
- TClonesArray &lhits = *(Hits());
- Int_t cpn0, cpn1, mod, status = 0;
- //
- // Track status
- if(gMC->IsTrackInside()) status += 1;
- if(gMC->IsTrackEntering()) status += 2;
- if(gMC->IsTrackExiting()) status += 4;
- if(gMC->IsTrackOut()) status += 8;
- if(gMC->IsTrackDisappeared()) status += 16;
- if(gMC->IsTrackStop()) status += 32;
- if(gMC->IsTrackAlive()) status += 64;
-
- //
- // retrieve the indices with the volume path
- //
- switch (lay) {
- case 0:case 1: // SPD
- if (AliITSInitGeometry::SPDIsTGeoNative()) {
- gMC->CurrentVolOffID(1,copy); // ladder
- gMC->CurrentVolOffID(3,cpn1); // stave
- gMC->CurrentVolOffID(5,cpn0); // sector
- } else {
- gMC->CurrentVolOffID(2,copy);
- gMC->CurrentVolOffID(4,cpn1);
- gMC->CurrentVolOffID(5,cpn0);
- };
- break;
- case 2:case 3: // SDD
- copy = 1;
- if (AliITSInitGeometry::SDDIsTGeoNative()) {
- gMC->CurrentVolOffID(2,cpn1);
- gMC->CurrentVolOffID(3,cpn0);
- } else {
- gMC->CurrentVolOffID(1,cpn1);
- gMC->CurrentVolOffID(2,cpn0);
- };
- break;
- case 4:case 5: // SSD
- copy = 1;
- //if (AliITSInitGeometry::SSDIsTGeoNative()) {
- // same levels for old and new geom
- gMC->CurrentVolOffID(1,cpn1);
- gMC->CurrentVolOffID(2,cpn0);
- break;
- default:
- AliError(Form("Invalid value: lay= %d . Not an ITS sensitive volume",lay));
- return; // not an ITS sensitive volume.
- } //
-
- fInitGeom.DecodeDetector(mod,lay+1,cpn0,cpn1,copy);
- // We should not need to pass by the switch !
- // This is time consuming...
- // therefore DecodeDetectorv11Hybrid(...) shouldn't be private !
- // and we should be able to use instead :
- //fInitGeom.DecodeDetectorv11Hybrid(mod,lay+1,cpn0,cpn1,copy);
-
- //
- // Fill hit structure.
- //
- hit.SetModule(mod);
- hit.SetTrack(gAlice->GetMCApp()->GetCurrentTrackNumber());
- gMC->TrackPosition(position);
- gMC->TrackMomentum(momentum);
- hit.SetPosition(position);
- hit.SetTime(gMC->TrackTime());
- hit.SetMomentum(momentum);
- hit.SetStatus(status);
- hit.SetEdep(gMC->Edep());
- hit.SetShunt(GetIshunt());
- if(gMC->IsTrackEntering()){
- hit.SetStartPosition(position);
- hit.SetStartTime(gMC->TrackTime());
- hit.SetStartStatus(status);
- return; // don't save entering hit.
- } // end if IsEntering
- // Fill hit structure with this new hit.
- //Info("StepManager","Calling Copy Constructor");
- new(lhits[fNhits++]) AliITShit(hit); // Use Copy Construtor.
- // Save old position... for next hit.
- hit.SetStartPosition(position);
- hit.SetStartTime(gMC->TrackTime());
- hit.SetStartStatus(status);
-
- return;
-}
-
git://git.uio.no / u / mrichter / AliRoot.git / commitdiff