Points 2 cavern/pit and shielding blocks as installed.

diff --git a/STRUCT/AliHALLv3.cxx b/STRUCT/AliHALLv3.cxx
new file mode 100644 (file)
index 0000000..f5e514d
--- /dev/null
+++ b/STRUCT/AliHALLv3.cxx
@@ -0,0 +1,409 @@
+/**************************************************************************
+ * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
+ *                                                                        *
+ * Author: The ALICE Off-line Project.                                    *
+ * Contributors are mentioned in the code where appropriate.              *
+ *                                                                        *
+ * Permission to use, copy, modify and distribute this software and its   *
+ * documentation strictly for non-commercial purposes is hereby granted   *
+ * without fee, provided that the above copyright notice appears in all   *
+ * copies and that both the copyright notice and this permission notice   *
+ * appear in the supporting documentation. The authors make no claims     *
+ * about the suitability of this software for any purpose. It is          *
+ * provided "as is" without express or implied warranty.                  *
+ **************************************************************************/
+
+/* $Id$ */
+
+///////////////////////////////////////////////////////////////////////////////
+//                                                                           //
+//  Experimental Hall                                                        //
+//  This class contains the description of the experimental hall             //
+//  and the shielding blocks.                                                // 
+//  Author: Andreas Morsch                                                   //
+//  andreas.morsch@cern.ch                                                   //
+//                                                                           //
+///////////////////////////////////////////////////////////////////////////////
+
+#include <TVirtualMC.h>
+
+#include "AliConst.h"
+#include "AliHALLv3.h"
+#include "AliMagF.h"
+#include "AliRun.h"
+#include "AliLog.h"
+#include <TGeoVolume.h>
+#include <TGeoManager.h>
+#include <TGeoMatrix.h>
+#include <TGeoCompositeShape.h>
+#include <TGeoBBox.h>
+#include <TGeoTube.h>
+#include <TGeoPgon.h>
+#include <TGeoPcon.h>
+#include <TGeoCone.h>
+#include <TGeoTrd1.h>
+#include <TGeoArb8.h>
+
+ClassImp(AliHALL)
+ 
+//_____________________________________________________________________________
+AliHALLv3::AliHALLv3()
+{
+  //
+  // Default constructor for the experimental Hall
+  //
+}
+ 
+//_____________________________________________________________________________
+AliHALLv3::AliHALLv3(const char *name, const char *title)
+       : AliHALL(name,title)
+{
+  //
+  // Standard constructor for the experimental Hall
+  //
+
+}
+ 
+//_____________________________________________________________________________
+void AliHALLv3::CreateGeometry()
+{
+  //
+  // Create the geometry of the exprimental hall
+  //
+  Float_t r2, dy;
+  Float_t phid, phim, h, r;
+  Float_t w1, dh, am, bm, dl,cm, hm, dr, dx, xl;
+  Float_t hullen;
+  Float_t phi;
+
+  // The top volume
+  //
+  TGeoVolume* top = gGeoManager->GetVolume("ALIC");
+  TGeoVolumeAssembly* asHall = new TGeoVolumeAssembly("HALL");
+  
+  // Rotations
+  // rotation by 90 deg in the y-z plane
+  TGeoRotation* rot000 = new TGeoRotation("rot000",  90., 0.,  0.,  0., 90., 90.);  
+  TGeoRotation* rot001 = new TGeoRotation("rot001", 270., 0., 90., 90.,  0.,  0.);  
+
+  // Materials
+  TGeoMedium* kMedCC     = gGeoManager->GetMedium("HALL_CC_C2");
+  TGeoMedium* kMedST     = gGeoManager->GetMedium("HALL_STST_C2");
+  // Floor thickness 
+  Float_t dyFloor  =  190.;
+  // Floor width
+  Float_t dxFloor  = 1400.;
+  // Floor level 
+  Float_t  yFloor  = -801.;
+  // Pit centre
+  Float_t  zPit    = 2300.;
+  // Pit radius
+  Float_t  rPit    = 1140.;
+  // Hall end 
+  Float_t  zHall24 = 1700.;
+  Float_t  zHall26 = 1900.;
+    // Overlap between hall and pit radius
+  Float_t oPit = zHall24 - (zPit - rPit);
+  // Length of the L3 floor
+  Float_t dzL3 = 1700.;
+  // Start of hall roof in y
+  Float_t yHall = 500.;
+  // Radius of the hall roof
+  Float_t rHall = 1070.;
+  //
+  Float_t epsBig   = 100.;
+  Float_t epsSmall =   1.;
+  
+  
+
+  //
+  // RB24/26 Tunnel Floor 
+  r   = 220.;
+  h   = 140.;
+  phi = TMath::ACos(h / r);
+  xl  = r * TMath::Sin(phi);
+  dr  = 1600.;
+  dh  = dr * TMath::Cos(phi);
+  dl  = dr * TMath::Sin(phi);
+  if (gAlice->GetModule("ZDC") == 0) {
+    //     No ZDC 
+    hullen = 370.;
+  } else {
+    
+    //     ZDC is present 
+    hullen = 6520.;
+  }
+
+  TGeoVolume* voHUFL = new TGeoVolume("HUFL",
+                                     new TGeoTrd1(xl +dl, xl, hullen, dh / 2.),
+                                     kMedCC);
+  r2 = hullen + zHall26;
+
+  asHall->AddNode(voHUFL, 1, new TGeoCombiTrans(70., -100. - dh / 2., -r2, rot000));
+  //
+  // RB24/26 wall 
+  
+  phid     = phi * 57.296;
+  TGeoVolume* voHUWA = new TGeoVolume("HUWA",
+                                     new TGeoTubeSeg(r, r+dr, hullen, phid - 90., 270. - phid),
+                                     kMedCC);
+  asHall->AddNode(voHUWA, 1, new TGeoTranslation(70., 40., -zHall26 - hullen ));
+  //
+  //  Hall floor 
+  //  RB26 side
+  phid      = 16.197;
+  Float_t dzFloor26 = zHall26 - dzL3/2.;
+  TGeoBBox* shHHF1 = new TGeoBBox(dxFloor/2. + 470., dyFloor/2., dzFloor26/2.);
+  shHHF1->SetName("shHHF1");
+  TGeoVolume* voHHF1 = new TGeoVolume("HHF1", shHHF1, kMedCC);
+  asHall->AddNode(voHHF1, 2, new TGeoTranslation(0., yFloor, -(dzL3/2. + dzFloor26/2.)));
+  // RB24 side
+  Float_t dzFloor24 = zHall24 - dzL3/2.;
+  TGeoBBox* shHHF41 = new TGeoBBox(dxFloor/2. + 470., dyFloor/2., dzFloor24/2.);
+  shHHF41->SetName("shHHF41");
+  TGeoTube* shHHF42 = new TGeoTube(0., rPit + epsBig, dyFloor/2.);
+  shHHF42->SetName("shHHF42");
+  TGeoCombiTrans* trHHF42 = new TGeoCombiTrans("trHHF42", 0., 0., dzFloor24/2. + rPit - oPit, rot000);
+  trHHF42->RegisterYourself();
+  
+  TGeoCompositeShape*  shHHF4 = new TGeoCompositeShape("HHF4", "shHHF41+shHHF42:trHHF42");
+  TGeoVolume* voHHF4 = new TGeoVolume("HHF4", shHHF4, kMedCC);
+  asHall->AddNode(voHHF4, 1, new TGeoTranslation(0., yFloor,  dzL3/2. + dzFloor24/2.));
+
+
+  //
+  //  Hall side walls 
+  Float_t trH1   = (1273.78 - dyFloor)/ 2.;
+  Float_t trBL1  = 207.3;
+  Float_t trTL1  =  50.;
+  Float_t trALP1 = TMath::ATan((trBL1 - trTL1) / 2. / trH1) * kRaddeg;
+  dx = 1.5 * trBL1 - 0.5 * trTL1 + dxFloor/2. + dyFloor * TMath::Tan(phid * kDegrad);
+  TGeoVolume* voHHW11 = new TGeoVolume("HHW11",
+                                      new TGeoTrap(dzFloor26/2., 0., 0., 
+                                                   trH1, trBL1, trTL1, trALP1, trH1, trBL1, trTL1, trALP1),
+                                      kMedCC);
+  TGeoVolume* voHHW12 = new TGeoVolume("HHW12",
+                                      new TGeoTrap(dzFloor24/2., 0., 0., 
+                                                   trH1, trBL1, trTL1, trALP1, trH1, trBL1, trTL1, trALP1),
+                                      kMedCC);
+ 
+  dy = yFloor + dyFloor/2. + trH1;
+  
+  asHall->AddNode(voHHW12, 1, new TGeoTranslation( dx, dy,  (dzL3/2. + dzFloor24/2.)));
+  asHall->AddNode(voHHW12, 2, new TGeoCombiTrans (-dx, dy,  (dzL3/2. + dzFloor24/2.), rot001));
+  asHall->AddNode(voHHW11, 3, new TGeoTranslation( dx, dy, -(dzL3/2. + dzFloor26/2.)));
+  asHall->AddNode(voHHW11, 4, new TGeoCombiTrans (-dx, dy, -(dzL3/2. + dzFloor26/2.), rot001));
+
+  Float_t boDY =  (yHall - (yFloor + dyFloor/2.) - 2. * trH1)/ 2.;
+  Float_t dzHall = zHall26 + zHall24;
+
+  TGeoVolume* voHBW1 = new TGeoVolume("HBW1", new TGeoBBox(50., boDY, dzHall / 2.), kMedCC);
+
+  asHall->AddNode(voHBW1, 1,  new TGeoTranslation( 1120., yHall - boDY, (zHall24-zHall26)/2.));
+  asHall->AddNode(voHBW1, 2,  new TGeoTranslation(-1120., yHall - boDY, (zHall24-zHall26)/2.));
+
+  //
+  // Slanted wall close to L3 magnet 
+  phim =  45.;
+  hm   = 790.;
+  am   = hm * TMath::Tan(phim / 2. * kDegrad);
+  bm   = (hm + 76.) / hm * am;
+  cm   = bm * 2. / TMath::Sqrt(2.);
+  trH1   =  (1273.78 - cm) / 2.;
+  trBL1  =  235. - cm * TMath::Tan(phid * kDegrad) / 2.;
+  trTL1  =   50.;
+  trALP1 = TMath::ATan((trBL1 - trTL1) / 2. / trH1) * kRaddeg;
+
+  w1 = trBL1;
+  dx = cm * TMath::Tan(phid * kDegrad) + dxFloor/2. + trBL1 * 1.5 - trTL1 * .5;
+
+  TGeoVolume* voHHW2 = new TGeoVolume("HHW2",
+                                     new TGeoTrap(dzL3/2., 0., 0., 
+                                                  trH1, trBL1, trTL1, trALP1, trH1, trBL1, trTL1, trALP1),
+                                     kMedCC);
+
+  r2 = cm + yFloor - dyFloor/2. + trH1;
+
+  asHall->AddNode(voHHW2, 1, new TGeoTranslation(dx, r2, 0.));
+  asHall->AddNode(voHHW2, 2, new TGeoCombiTrans(-dx, r2, 0., rot001));
+
+  trH1   = cm / 2.;
+  trBL1  = w1 + cm / 2.;
+  trTL1  = w1;
+  trALP1 = TMath::ATan(.5) * kRaddeg;
+  dx = 1170. - trBL1 * .5 - trTL1 * .5;
+
+  TGeoVolume* voHHW3 = new TGeoVolume("HHW3",
+                                     new TGeoTrap(dzL3/2., 0., 0., 
+                                                  trH1, trBL1, trTL1, trALP1, trH1, trBL1, trTL1, trALP1),
+                                     kMedCC);
+
+  r2 = trH1 - 896.;
+  asHall->AddNode(voHHW3, 1, new TGeoTranslation( dx, r2, 0.));
+  asHall->AddNode(voHHW3, 2, new TGeoCombiTrans (-dx, r2, 0., rot001));
+  //
+  // Floor L3
+  Float_t dyFloorL3  = 76.;
+  Float_t dx1FloorL3 = rHall + epsBig - 2. * trBL1;
+  Float_t dx2FloorL3 = dx1FloorL3 + TMath::Tan(phim * kDegrad) * dyFloorL3;
+  
+  
+  TGeoVolume* voHHF2 = new TGeoVolume("HHF2", 
+                                     new TGeoTrd1(dx1FloorL3, dx2FloorL3, dzL3/2., dyFloorL3/2.), 
+                                     kMedCC);
+
+  asHall->AddNode(voHHF2, 1, new TGeoCombiTrans(0., yFloor - dyFloor / 2. + dyFloorL3 / 2.,0., rot000));
+  //
+  // Tunnel roof and pit
+  // Roof
+  TGeoTubeSeg* shHHC11 = new TGeoTubeSeg(rHall, rHall + 100., dzHall / 2., 0., 180.);
+  shHHC11->SetName("shHHC11");
+  // Pit 
+  TGeoTube*    shHHC12 = new TGeoTube(rPit, rPit + 100., 1000.);
+  shHHC12->SetName("shHHC12");
+  // Pit inside
+  TGeoTube*    shHHC13 = new TGeoTube(   0, rPit - epsSmall, 1000.);
+  shHHC13->SetName("shHHC13");
+  // Roof inside
+  TGeoTubeSeg* shHHC14 = new TGeoTubeSeg(0., rHall, dzHall / 2. + epsBig, 0., 180.);
+  shHHC14->SetName("shHHC14");
+
+  TGeoCombiTrans* trHHC = new TGeoCombiTrans("trHHC", 0., 1000., dzHall/2. + rPit - oPit, rot000);
+  trHHC->RegisterYourself();
+  TGeoCompositeShape*  shHHC1 = new TGeoCompositeShape("HHC1", "shHHC11+shHHC12:trHHC-(shHHC14+shHHC13:trHHC)");
+  TGeoVolume* voHHC1 = new TGeoVolume("HHC1", shHHC1, kMedCC);
+
+  asHall->AddNode(voHHC1, 1, new TGeoTranslation(0., yHall, -(zHall26-zHall24)/2.));
+
+
+  //
+  // Pit wall ground level
+  TGeoTube* shHHCPW1 = new TGeoTube(rPit, rPit + 100., 1206./2.);
+  shHHCPW1->SetName("shHHCPW1");
+  TGeoCombiTrans* trHHCPW1 = new TGeoCombiTrans("trHHCPW1", 0., 0., 0., rot000);
+  trHHCPW1->RegisterYourself();
+
+  TGeoBBox* shHHCPW2 = new TGeoBBox(rPit + 100., 1206./ 2. + 20., rPit + 100.);
+  shHHCPW2->SetName("shHHCPW2");
+
+  
+  TGeoTranslation* trHHCPW2 = new TGeoTranslation("trHHCPW2", 0., 0., -(rPit + 100.) - oPit);
+  trHHCPW2->RegisterYourself();
+
+  TGeoCompositeShape*  shHHCPW = new TGeoCompositeShape("HHCPW", "shHHCPW1:trHHCPW1-shHHCPW2:trHHCPW2");
+  TGeoVolume* voHHCPW = new TGeoVolume("HHCPW", shHHCPW, kMedCC);
+  dy = yFloor + 1206. / 2. + dyFloor/2.;
+  asHall->AddNode(voHHCPW, 1, new TGeoTranslation(0., dy, 2300.));
+  // 
+  // Foundations of the Muon Spectrometer
+  // Drawing ALIP2A_0110
+  //
+  TGeoVolumeAssembly* asFMS = new TGeoVolumeAssembly("asFMS");
+  Float_t zFil = -1465.86 - 60.;
+  // Muon Filter Foundation
+  // Pillars
+  dy = 263.54/2.;
+  Float_t ys = yFloor + dyFloor / 2.;
+  TGeoVolume* voFmsMfPil = new TGeoVolume("FmsMfPil", new TGeoBBox( 50., dy, 165.), kMedCC);
+  ys += dy;
+  asFMS->AddNode(voFmsMfPil, 1, new TGeoTranslation(-330. + 50., ys, zFil + 165. - 90.));
+  asFMS->AddNode(voFmsMfPil, 2, new TGeoTranslation( 330. - 50., ys, zFil + 165  - 90.));
+  //
+  // Transverse bars
+  ys += dy;
+  dy = 126.46/2.;
+  ys += dy;
+  TGeoVolume* voFmsMfTb1 = new TGeoVolume("FmsMfTb1", new TGeoBBox(330., dy,  90.), kMedCC);
+  asFMS->AddNode(voFmsMfTb1, 1, new TGeoTranslation(0., ys, zFil));
+  ys += dy;
+  dy = 41.14/2.;
+  ys += dy;
+  TGeoVolume* voFmsMfTb2 = new TGeoVolume("FmsMfTb2", new TGeoBBox(330., dy,  60.), kMedCC);
+  asFMS->AddNode(voFmsMfTb2, 1, new TGeoTranslation(0., ys, zFil));
+  //
+  // Dipole foundation
+  ys = yFloor + dyFloor / 2.;
+  dy = 263.54/2;
+  ys += dy;
+  TGeoVolume* voFmsDf1 = new TGeoVolume("FmsDf1", new TGeoBBox(370., dy,  448.0 / 2.), kMedCC);
+  asFMS->AddNode(voFmsDf1, 1, new TGeoTranslation(0., ys, zFil + 240. + 224.));
+  TGeoVolume* voFmsDf2 = new TGeoVolume("FmsDf2", new TGeoBBox(370., (263.54 + 110.)/2.,  112.0 / 2.), kMedCC);
+  asFMS->AddNode(voFmsDf2, 1, new TGeoTranslation(0., ys - 110./2., zFil + 688. + 56.));
+
+  //
+  // Shielding in front of L3 magnet in PX24 and UX25
+  // Drawing ALIP2I__0016
+  //
+
+  TGeoVolumeAssembly* asShRb24 = new TGeoVolumeAssembly("ShRb24");
+  //
+  // Side walls 
+  // start 7450 from IP
+  TGeoVolume* voShRb24Sw = new TGeoVolume("ShRb24Sw", new TGeoBBox(80., 420., 520.), kMedCC);
+  asShRb24->AddNode(voShRb24Sw, 1, new TGeoTranslation(+315, -420. + 140., 0.));
+  asShRb24->AddNode(voShRb24Sw, 2, new TGeoTranslation(-315, -420. + 140., 0.));
+  //
+  // Roof
+  TGeoVolume* voShRb24Ro = new TGeoVolume("ShRb24Ro", new TGeoBBox(395., 80., 520.), kMedCC);
+  asShRb24->AddNode(voShRb24Ro, 1, new TGeoTranslation(0., +80. + 140., 0.));
+  //
+  // Plug
+  TGeoBBox* shShRb24Pl1 = new TGeoBBox(235., 140., 40.);
+  shShRb24Pl1->SetName("ShRb24Pl1");
+  //
+  // Opening for beam pipe
+  TGeoBBox* shShRb24Pl2 = new TGeoBBox(15., 20., 60.);
+  shShRb24Pl2->SetName("ShRb24Pl2");
+  //
+  // Opening for tubes
+  TGeoBBox* shShRb24Pl3 = new TGeoBBox(20., 60., 60.);
+  shShRb24Pl3->SetName("ShRb24Pl3");
+
+  TGeoTranslation* trPl3 = new TGeoTranslation("trPl3", +235. -90., 80., 0.);
+  trPl3->RegisterYourself();
+  TGeoCompositeShape*  shRb24Pl = new TGeoCompositeShape("Rb24Pl", "ShRb24Pl1-(ShRb24Pl2+ShRb24Pl3:trPl3)");
+  TGeoVolume* voRb24Pl = new TGeoVolume("Rb24Pl", shRb24Pl, kMedCC);
+  asShRb24->AddNode(voRb24Pl, 1, new TGeoTranslation(0., 0., 520. - 40.));
+
+  //
+  // Concrete platform and shielding PX24
+  // Drawing LHCJUX 250014
+  //
+  TGeoVolumeAssembly* asShPx24 = new TGeoVolumeAssembly("ShPx24");
+  // Platform
+  TGeoVolume* voShPx24Pl = new TGeoVolume("ShPx24Pl", new TGeoBBox(1613.5/2., 120./2., 1205./2.), kMedCC);
+  asShPx24->AddNode(voShPx24Pl, 1, new TGeoTranslation(55., -140. - 60., 0.));
+  // Pillars
+  TGeoVolume* voShPx24Pi = new TGeoVolume("ShPx24Pi", new TGeoBBox(160./2., 440./2., 40/2.), kMedCC);
+  asShPx24->AddNode(voShPx24Pi, 1, new TGeoTranslation(-180. - 80., -220. -260.,  1205./2. - 20.));
+  asShPx24->AddNode(voShPx24Pi, 2, new TGeoTranslation(+290. + 80., -220. -260.,  1205./2. - 20.));
+  asShPx24->AddNode(voShPx24Pi, 3, new TGeoTranslation(-180. - 80., -220. -260., -1205./2. + 20. + 120.));
+  asShPx24->AddNode(voShPx24Pi, 4, new TGeoTranslation(+290. + 80., -220. -260., -1205./2. + 20. + 120.));
+  asShPx24->AddNode(voShPx24Pi, 5, new TGeoTranslation(-180. - 80., -220. -260., -1205./2. - 20. + 480.));
+  asShPx24->AddNode(voShPx24Pi, 6, new TGeoTranslation(+290. + 80., -220. -260., -1205./2. - 20. + 480.));
+  asShPx24->AddNode(voShPx24Pi, 7, new TGeoTranslation(-180. - 80., -220. -260., -1205./2. - 20. + 800.));
+  asShPx24->AddNode(voShPx24Pi, 8, new TGeoTranslation(+290. + 80., -220. -260., -1205./2. - 20. + 800.));
+  // Side Walls 
+  TGeoVolume* voShPx24Sw = new TGeoVolume("ShPx24Sw", new TGeoBBox(160./2., 280./2., 1205./2.), kMedCC);
+  asShPx24->AddNode(voShPx24Sw, 1, new TGeoTranslation(-180, 0., 0.));
+  asShPx24->AddNode(voShPx24Sw, 2, new TGeoTranslation(+290, 0., 0.));
+  // Roof
+  TGeoVolume* voShPx24Ro = new TGeoVolume("ShPx24Ro", new TGeoBBox(630./2., 160./2., 1205./2.), kMedCC);
+  asShPx24->AddNode(voShPx24Ro, 1, new TGeoTranslation(55., 80.+ 140., 0.));
+  asHall->AddNode(asShRb24, 1, new TGeoTranslation(0., 0., +745. + 520.));
+  asHall->AddNode(asShPx24, 1, new TGeoTranslation(0., 0., +745. + 1040. + 1205./ 2.));
+  // Stainless Steel Plug 80 cm thick
+  TGeoBBox* shShPx24Pl1 = new TGeoBBox(155., 140., 40.);
+  shShPx24Pl1->SetName("ShPx24Pl1");
+  // Opening for beam pipe
+  TGeoBBox* shShPx24Pl2 = new TGeoBBox(15., 20., 60.);
+  shShPx24Pl2->SetName("ShPx24Pl2");
+  TGeoCompositeShape*  shPx24Pl = new TGeoCompositeShape("Px24Pl", "ShPx24Pl1-ShPx24Pl2");
+  TGeoVolume* voPx24Pl = new TGeoVolume("Px24Pl", shPx24Pl, kMedST);
+  asShPx24->AddNode(voPx24Pl, 1, new TGeoTranslation(55., 0., -1205./2. + 40.));
+  asHall->AddNode(asFMS, 1, new TGeoTranslation(0.,  0., 0.));
+  
+  //
+  top->AddNode(asHall, 1, gGeoIdentity);
+  
+}

diff --git a/STRUCT/AliHALLv3.h b/STRUCT/AliHALLv3.h
new file mode 100644 (file)
index 0000000..7b7e109
--- /dev/null
+++ b/STRUCT/AliHALLv3.h
@@ -0,0 +1,25 @@
+#ifndef ALIHALLV3_H
+#define ALIHALLV3_H
+/* Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
+ * See cxx source for full Copyright notice                               */
+
+/* $Id$ */
+
+////////////////////////////////////////////////
+//  Manager class for detector: HALL          //
+////////////////////////////////////////////////
+ 
+#include "AliHALL.h"
+ 
+ 
+class AliHALLv3 : public AliHALL {
+ 
+public:
+   AliHALLv3();
+   AliHALLv3(const char *name, const char *title);
+   virtual      ~AliHALLv3() {}
+   virtual void  CreateGeometry();
+   ClassDef(AliHALLv3,1)  //Class for ALICE experimental hall
+};
+
+#endif

diff --git a/STRUCT/STRUCTLinkDef.h b/STRUCT/STRUCTLinkDef.h
index a8713165ac088616961f87c5c48dbd4f98f26877..3b4e2e8d3a1b8da1e3bbc6cd50506ee6b627a319 100644 (file)
--- a/STRUCT/STRUCTLinkDef.h
+++ b/STRUCT/STRUCTLinkDef.h
@@ -21,6 +21,7 @@
 #pragma link C++ class  AliFRAMEv1+;
 #pragma link C++ class  AliFRAMEv2+;
 #pragma link C++ class  AliHALL+;
+#pragma link C++ class  AliHALLv3+;
 #pragma link C++ class  AliPIPE+;
 #pragma link C++ class  AliPIPEv0+;
 #pragma link C++ class  AliPIPEv3+;

diff --git a/STRUCT/libSTRUCT.pkg b/STRUCT/libSTRUCT.pkg
index cbecd10123b06fd76f96ca6571f3d008060560ee..b91b4ec4d3635aafc0d4d0f0929440f403251946 100644 (file)
--- a/STRUCT/libSTRUCT.pkg
+++ b/STRUCT/libSTRUCT.pkg
@@ -1,10 +1,11 @@
-SRCS=  AliMAG.cxx      AliABSO.cxx       AliABSOv0.cxx \
-       AliDIPO.cxx     AliDIPOv2.cxx     AliDIPOv3.cxx \
-       AliFRAME.cxx    AliFRAMEv0.cxx    AliFRAMEv1.cxx AliFRAMEv2.cxx \
-       AliHALL.cxx     AliSHIL.cxx      AliSHILv0.cxx AliSHILvF.cxx AliABSOv3.cxx\
-       AliPIPE.cxx     AliPIPEv0.cxx AliPIPEv3.cxx \
-       AliBODY.cxx     AliALIFE.cxx AliSHILv2.cxx AliSHILv3.cxx \
-       AliFieldReader.cxx      
+SRCS=          AliMAG.cxx      AliABSO.cxx       AliABSOv0.cxx \
+               AliDIPO.cxx     AliDIPOv2.cxx     AliDIPOv3.cxx \
+               AliFRAME.cxx    AliFRAMEv0.cxx    AliFRAMEv1.cxx AliFRAMEv2.cxx \
+               AliHALL.cxx     AliHALLv3.cxx     \
+       AliSHIL.cxx     AliSHILv0.cxx AliSHILvF.cxx AliABSOv3.cxx\
+               AliPIPE.cxx     AliPIPEv0.cxx AliPIPEv3.cxx \
+               AliBODY.cxx     AliALIFE.cxx AliSHILv2.cxx AliSHILv3.cxx \
+               AliFieldReader.cxx      
 
 
 HDRS= $(SRCS:.cxx=.h)