/*
$Log$
+Revision 1.28 2001/03/28 06:40:20 barbera
+Central and services mother volumes made consistenf for detailed and coarse geometry. Switch for rails added to the coarse geometries
+
Revision 1.26 2001/03/23 00:12:23 nilsen
Set Reading of AliITSgeom data from Geant3 common blocks as the default and
not a .det file. Removed redundent calls to BuildGeometry.
dgh[0] = 2.;
dgh[1] = 8.;
dgh[2] = 190.;
- gMC->Gsvolu("IRA1", "BOX ", idtmed[210], dgh, 3);
+ gMC->Gsvolu("IRA1", "BOX ", idtmed[268], dgh, 3);
gMC->Gspos("IRA1", 1, "ITSV", 53.5, 0., -69.5, 0, "ONLY");
- gMC->Gsvolu("IRA2", "BOX ", idtmed[210], dgh, 3);
+ gMC->Gsvolu("IRA2", "BOX ", idtmed[268], dgh, 3);
gMC->Gspos("IRA2", 1, "ITSV", -53.5, 0., -69.5, 0, "ONLY");
- dgh[0] = 2.-0.5531; // 0.5531 was determined in such a way that the aluminum area is 20.9 cm^2
- dgh[1] = 8.-0.5531; // 0.5531 was determined in such a way that the aluminum area is 20.9 cm^2
+ dgh[0] = 2.-0.5; // 0.5 was determined in such a way that the aluminum area is 20.9 cm^2
+ dgh[1] = 8.-0.5; // 0.5 was determined in such a way that the aluminum area is 20.9 cm^2
dgh[2] = 190.;
gMC->Gsvolu("IRA3", "BOX ", idtmed[205], dgh, 3);
gMC->Gspos("IRA3", 1, "IRA1", 0., 0., 0., 0, "ONLY");
/*
$Log$
+Revision 1.20 2001/03/28 06:40:21 barbera
+Central and services mother volumes made consistenf for detailed and coarse geometry. Switch for rails added to the coarse geometries
+
Revision 1.19 2001/03/13 18:13:30 barbera
Some mother volumes sligthly modified to eliminate an overlap with the absorber
dgh[0] = 2.;
dgh[1] = 8.;
dgh[2] = 190.;
- gMC->Gsvolu("IRA1", "BOX ", idtmed[285], dgh, 3);
+ gMC->Gsvolu("IRA1", "BOX ", idtmed[239], dgh, 3);
gMC->Gspos("IRA1", 1, "ITSV", 53.5, 0., -69.5, 0, "ONLY");
- gMC->Gsvolu("IRA2", "BOX ", idtmed[285], dgh, 3);
+ gMC->Gsvolu("IRA2", "BOX ", idtmed[239], dgh, 3);
gMC->Gspos("IRA2", 1, "ITSV", -53.5, 0., -69.5, 0, "ONLY");
- dgh[0] = 2.-0.5531; // 0.5531 was determined in such a way that the aluminum area is 20.9 cm^2
- dgh[1] = 8.-0.5531; // 0.5531 was determined in such a way that the aluminum area is 20.9 cm^2
+ dgh[0] = 2.-0.5; // 0.5 was determined in such a way that the aluminum area is 20.9 cm^2
+ dgh[1] = 8.-0.5; // 0.5 was determined in such a way that the aluminum area is 20.9 cm^2
dgh[2] = 190.;
gMC->Gsvolu("IRA3", "BOX ", idtmed[275], dgh, 3);
gMC->Gspos("IRA3", 1, "IRA1", 0., 0., 0., 0, "ONLY");
AliMixture( 36, "SDD Ceramics$", acer, zcer, denscer, -5, wcer);
AliMaterial(37, "SDD Kapton$", 12.011, 6., 1.3, 31.27, 999.);
AliMaterial(38, "SDD End ladder$", 69.9298, 29.8246, 0.3824, 36.5103, 999.);
- AliMaterial(39, "SDD cone$",63.546, 29., 1.15, 1.265, 999.);
+ AliMaterial(39, "SDD cone$",63.546, 29., 1.15, 1.265, 999.);
+ AliMaterial(40, "SDD M55J$",12.3565, 6.4561, 1.8097, 22.9570, 999.);
//AliMaterial(38, "SDD End ladder$", 69.9298, 29.8246, -0.3824, -36.5103, 999.);
//AliMaterial(39, "SDD cone$",63.546, 29., -1.15, -1.265, 999.);
AliMedium(37, "SDD Kapton$", 37, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
AliMedium(38, "SDD End ladder$",38, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
AliMedium(39, "SDD cone$", 39, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
-
+ AliMedium(40, "SDD M55J$", 40, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
// 250-274 --> Silicon Strip Detectors (detectors, chips, buses, cooling,..)
AliMaterial(50, "SSD Si$", 28.0855, 14., 2.33, 9.36, 999.);
/*
$Log$
+Revision 1.18 2001/03/28 06:40:21 barbera
+Central and services mother volumes made consistenf for detailed and coarse geometry. Switch for rails added to the coarse geometries
+
Revision 1.17 2001/03/13 18:13:30 barbera
Some mother volumes sligthly modified to eliminate an overlap with the absorber
dgh[0] = 2.;
dgh[1] = 8.;
dgh[2] = 190.;
- gMC->Gsvolu("IRA1", "BOX ", idtmed[285], dgh, 3);
+ gMC->Gsvolu("IRA1", "BOX ", idtmed[239], dgh, 3);
gMC->Gspos("IRA1", 1, "ITSV", 53.5, 0., -69.5, 0, "ONLY");
- gMC->Gsvolu("IRA2", "BOX ", idtmed[285], dgh, 3);
+ gMC->Gsvolu("IRA2", "BOX ", idtmed[239], dgh, 3);
gMC->Gspos("IRA2", 1, "ITSV", -53.5, 0., -69.5, 0, "ONLY");
- dgh[0] = 2.-0.5531; // 0.5531 was determined in such a way that the aluminum area is 20.9 cm^2
- dgh[1] = 8.-0.5531; // 0.5531 was determined in such a way that the aluminum area is 20.9 cm^2
+ dgh[0] = 2.-0.5; // 0.5 was determined in such a way that the aluminum area is 20.9 cm^2
+ dgh[1] = 8.-0.5; // 0.5 was determined in such a way that the aluminum area is 20.9 cm^2
dgh[2] = 190.;
gMC->Gsvolu("IRA3", "BOX ", idtmed[275], dgh, 3);
gMC->Gspos("IRA3", 1, "IRA1", 0., 0., 0., 0, "ONLY");
AliMaterial(37, "SDD Kapton$", 12.011, 6., 1.3, 31.27, 999.);
AliMaterial(38, "SDD End ladder$", 69.9298, 29.8246, 0.3824, 36.5103, 999.);
AliMaterial(39, "SDD cone$",63.546, 29., 1.15, 1.265, 999.);
+ AliMaterial(40, "SDD M55J$",12.3565, 6.4561, 1.8097, 22.9570, 999.);
//AliMaterial(38, "SDD End ladder$", 69.9298, 29.8246, -0.3824, -36.5103, 999.);
//AliMaterial(39, "SDD cone$",63.546, 29., -1.15, -1.265, 999.);
AliMedium(37, "SDD Kapton$", 37, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
AliMedium(38, "SDD End ladder$",38, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
AliMedium(39, "SDD cone$", 39, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
-
+ AliMedium(40, "SDD M55J$", 40, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
// 250-274 --> Silicon Strip Detectors (detectors, chips, buses, cooling,..)
AliMaterial(50, "SSD Si$", 28.0855, 14., 2.33, 9.36, 999.);
/*
$Log$
+Revision 1.12 2001/03/28 06:40:20 barbera
+Central and services mother volumes made consistenf for detailed and coarse geometry. Switch for rails added to the coarse geometries
+
Revision 1.11 2001/03/23 00:12:23 nilsen
Set Reading of AliITSgeom data from Geant3 common blocks as the default and
not a .det file. Removed redundent calls to BuildGeometry.
dgh[0] = 2.;
dgh[1] = 8.;
dgh[2] = 190.;
- gMC->Gsvolu("IRA1", "BOX ", idtmed[210], dgh, 3);
+ gMC->Gsvolu("IRA1", "BOX ", idtmed[268], dgh, 3);
gMC->Gspos("IRA1", 1, "ITSV", 53.5, 0., -69.5, 0, "ONLY");
- gMC->Gsvolu("IRA2", "BOX ", idtmed[210], dgh, 3);
+ gMC->Gsvolu("IRA2", "BOX ", idtmed[268], dgh, 3);
gMC->Gspos("IRA2", 1, "ITSV", -53.5, 0., -69.5, 0, "ONLY");
- dgh[0] = 2.-0.5531; // 0.5531 was determined in such a way that the aluminum area is 20.9 cm^2
- dgh[1] = 8.-0.5531; // 0.5531 was determined in such a way that the aluminum area is 20.9 cm^2
+ dgh[0] = 2.-0.5; // 0.5 was determined in such a way that the aluminum area is 20.9 cm^2
+ dgh[1] = 8.-0.5; // 0.5 was determined in such a way that the aluminum area is 20.9 cm^2
dgh[2] = 190.;
gMC->Gsvolu("IRA3", "BOX ", idtmed[205], dgh, 3);
gMC->Gspos("IRA3", 1, "IRA1", 0., 0., 0., 0, "ONLY");