/*
$Log$
+Revision 1.2 2003/01/26 14:35:15 nilsen
+Some more geometry interface functions added and a start at the SSD support
+cone geometry. Committed to allow easy updates of partical work between authors.
+
Revision 1.1 2003/01/20 23:32:49 nilsen
New ITS geometry. Only a Skeleton for now.
delete[] name2;
}
//______________________________________________________________________
-void AliITSv11::SSDCone(Double_t zShift){
+void AliITSv11::MixtureByWeight(Int_t imat,const char* name,Int_t *z,
+ Double_t *w,Double_t dens,Int_t n,Int_t istd){
+ // Defines a Geant material by a set of elements and weights, and sets
+ // its Geant medium proporties. The average atomic A is assumed to be
+ // given by their natural abundances. Things like the radiation length
+ // are calculated for you.
+ // Inputs:
+ // Int_t imat Material number.
+ // const char* name Material name. No need to add a $ at the end.
+ // Int_t *z Array of The elemental numbers.
+ // Double_t *w Array of relative weights.
+ // Double_t dens The density of the material [g/cm^3].
+ // Int_t n the number of elements making up the mixture.
+ // Int_t istd Defines which standard set of transport parameters
+ // which should be used.
+ // Output:
+ // none.
+ // Return:
+ // none.
+ Float_t rad,*Z,*A,tmax,stemax,deemax,epsilon;
+ char *name2;
+ Int_t len,i;
+ Z = new Float_t[n];
+ A = new Float_t[n];
+
+ len = strlng(name)+1;
+ name2 = new char[len];
+ strncpy(name2,name,len-1);
+ name2[len-1] = '\0';
+ name2[len-2] = '$';
+ for(i=0;i<n;i++){Z[i] = (Float_t)z[i];A[i] = (Float_t)GetA(z[i]);
+ W[i] = (Float_t)w[i]}
+ rad = GetRadLength(z)/dens;
+ AliMixture(imat,name2,A,Z,dens,n,W);
+ tmax = GetStandardTheataMax(istd); // degree
+ stemax = GetStandardMaxStepSize(istd); // cm
+ deemax = GetStandardEfraction(istd); // #
+ epsilon = GetStandardEpsilon(istd);
+ AliMedium(imat,name2,imat,0,gAlice->Field()->Integ(),
+ gAlice->Field()->Max(),tmax,stemax,deemax,epsilon,0.0);
+ delete[] name2;
+}
+//______________________________________________________________________
+void AliITSv11::MixtureByNumber(Int_t imat,const char* name,Int_t *z,
+ Int_t *w,Double_t dens,Int_t n,Int_t istd){
+ // Defines a Geant material by a set of elements and number, and sets
+ // its Geant medium proporties. The average atomic A is assumed to be
+ // given by their natural abundances. Things like the radiation length
+ // are calculated for you.
+ // Inputs:
+ // Int_t imat Material number.
+ // const char* name Material name. No need to add a $ at the end.
+ // Int_t *z Array of The elemental numbers.
+ // Int_t_t *w Array of relative number.
+ // Double_t dens The density of the material [g/cm^3].
+ // Int_t n the number of elements making up the mixture.
+ // Int_t istd Defines which standard set of transport parameters
+ // which should be used.
+ // Output:
+ // none.
+ // Return:
+ // none.
+ Float_t rad,*Z,*A,tmax,stemax,deemax,epsilon;
+ char *name2;
+ Int_t len,i;
+ Z = new Float_t[n];
+ A = new Float_t[n];
+
+ len = strlng(name)+1;
+ name2 = new char[len];
+ strncpy(name2,name,len-1);
+ name2[len-1] = '\0';
+ name2[len-2] = '$';
+ for(i=0;i<n;i++){Z[i] = (Float_t)z[i];A[i] = (Float_t)GetA(z[i]);
+ W[i] = (Float_t)w[i]}
+ rad = GetRadLength(z)/dens;
+ AliMixture(imat,name2,A,Z,dens,-n,W);
+ tmax = GetStandardTheataMax(istd); // degree
+ stemax = GetStandardMaxStepSize(istd); // cm
+ deemax = GetStandardEfraction(istd); // #
+ epsilon = GetStandardEpsilon(istd);
+ AliMedium(imat,name2,imat,0,gAlice->Field()->Integ(),
+ gAlice->Field()->Max(),tmax,stemax,deemax,epsilon,0.0);
+ delete[] name2;
+//______________________________________________________________________
+void AliITSv11::SSDConeDetail(TVector3 &tran,const char moth[3],Int_t mat0){
// Defines the volumes and materials for the ITS SSD Support cone.
// Based on drawings ALR-0767 and ALR-0767/3. Units are in mm.
- // Inputs:
+ // Inputs:
+ // Double_t zShift The z shift to be applied to the final volume.
+ // Outputs:
+ // none.
+ // Return:
+ // none.
+ Double_t th = 13.0; //mm, Thickness of Rohacell+carbon fiber
+ Double_t ct=1.5; //mm, Carbon finber thickness
+ Double_t r=15.0; // mm, Radius of curvature.
+ Double_t tc=51.0; // angle of SSD cone [degrees].
+ Double_t sintc=Sind(tc),costc=Cosd(tc),tantc=Tand(tc);
+ Double_t z0=0.0,Routmax=0.5*985.,Routmin=0.5*945.,Rholemax=0.5*890.;
+ Double_t Rholemin=0.5*740.,Rin=0.5*560.;
+ Int_t nspoaks=12,ninscrews=40,npost=4;
+ Int_t SSDcf=man0+1; // SSD support cone Carbon Fiber materal number.
+ Int_t SSDfs=mat0+2; // SSD support cone inserto stesalite 4411w.
+ Int_t SSDfo=mat0+3; // SSD support cone foam, Rohacell 50A.
+ Int_t SSDsw=mat0+4; // SSD support cone screw material,Stainless steal
+ Double_t t; // some general angle [degrees].
+ Double_t phi0=0.0,dphi=360.0;
+ Int_t i,j,n,nz,nrad=0;
+
+ SetScalemm();
+ // Lets start with the upper left outer carbon fiber surface.
+ // Between za[2],rmaxa[2] and za[4],rmaxa[4] there is a curved section
+ // given by rmaxa = rmaxa[2]-r*Sind(t) for 0<=t<=tc and
+ // za = za[2] + r*Cosd(t) for 0<=t<=tc. Simularly between za[1],rmina[1
+ // and za[3],rmina[3] there is a curve section given by
+ // rmina = rmina[1]-r*Sind(t) for 0<=t<=tc and za = za[1]+r&Sind(t)
+ // for t<=0<=tc. These curves have been replaced by straight lines
+ // between the equivelent points for simplicity.
+ Double_t dza = th/sintc-(Routmax-Routmin)/tantc;
+ if(dza<=0){ // The number or order of the points are in error for a proper
+ // call to pcons!
+ Error("SSDcone","The definition of the points for a call to PCONS is"
+ " in error. abort.");
+ return;
+ } // end if
+ nz = 7;
+ Double_t *za = new Double_t[nz];
+ Double_t *rmina = new Double_t[nz];
+ Double_t *rmaxa = new Double_t[nz];
+ za[0] = z0;
+ rmina[0] = Routmin;
+ rmaxa[0] = Routmax;
+ za[1] = za[0]+13.5-5.0 - dza; // za[2] - dza.
+ rmina[1] = rmina[0];
+ rmaxa[1] =rmaxa[0];
+ za[2] = za[0]+13.5-5.0; // From Drawing ALR-0767 and ALR-0767/3
+ rmaxa[2] = rmaxa[0];
+ za[3] = za[1]+rc*sintc;
+ rmina[3] = rmina[1]-rc*sintc;
+ rmina[2] = rmina[1]+(rmina[3]-rmina[1])*(za[2]-za[1])/(za[3]-za[1]);
+ za[4] = za[2]+rc*sintc;
+ rmaxa[4] = rmaxa[2]-rc*sintc;
+ rmaxa[3] = rmaxa[2]+(rmaxa[4]-rmaxa[2])*(za[3]-za[2])/(za[4]-za[2]);
+ rmina[5] = Rholemax;
+ za[5] = za[3]+(za[4]-za[3])*(rmina[5]-rmina[3])/(rmina[4]-rmina[3]);
+ rmina[4] = rmina[3]+(rmina[5]-rmina[3])*(za[4]-za[3])/(za[5]-za[3]);
+ za[6] = th/sinth+za[5];
+ rmina[6] = Rholemax;
+ rmaxa[6] = rmina[6];
+ rmaxa[5] = rmaxa[4]+(rmaxa[6]-rmaxa[4])*(za[5]-za[4])/(za[6]-za[4]);
+ //
+ PolyCone("SCA","SSD Suport cone Carbon Fiber Surface outer left",
+ phi0,dphi,nz,*z,*rmin,*rmax,SSDcf);
+ Pos("SCA",1,moth,trans.x(),trans.y(),trans.z(),0);
+ XMatrix(1,180.0);
+ Pos("SCA",2,moth,trans.x(),trans.y(),-trans.z(),1);
+ Za[0] = 1.; Wa[0] = ; // Hydrogen Content
+ Za[1] = 6.; Wa[1] = ; // Carbon Content
+ MixtureByWeight(SSDcf,"Carbon Fiber for SSD support cone",Z,W,dens,2);
+ //
+ // Now lets define the Inserto Stesalite 4411w material volume.
+ nz = 6;
+ Double_t *zb = new Double_t[nz];
+ Double_t *rminb = new Double_t[nz];
+ Double_t *rmaxb = new Double_t[nz];
+ zb[0] = z0;
+ rminb[0] = rmina[0]+ct;
+ rmaxb[0] = rmaxa[0]-ct;
+ zb[1] = za[1];
+ rminb[1] = rminb[0];
+ rmaxb[1] = rmaxb[0];
+ zb[2] = za[2];
+ rmaxb[2] = rmaxb[1];
+ zb[3] = za[4] - ct/sintc;
+ rmaxb[3] = rmaxb[2] - (rc-ct)*sintc;
+ zb[4] = za[3]+ct/sintc;
+ rminb[4] = rminb[1]-(rc-ct)*sintc;
+ rminb[2] = rminb[1]+(rminb[4]-rminb[1])*(zb[2]-zb[1])/(zb[4]-zb[1]);
+ rminb[3] = rminb[1]+(rminb[4]-rminb[1])*(zb[3]-zb[1])/(zb[4]-zb[1]);
+ zb[5] = zb[4]+(ct-2.*ct)/sintc;
+ rminb[5] = rminb[4]+(ct-2.*ct)*tantc;
+ rmaxb[5] = rminb[5];
+ rmaxb[4] = rmaxb[3]+(rmaxb[5]-rmaxb[3])*(zb[4]-zb[3])/(zb[5]-zb[3]);
+ PolyCone("SCB","SSD Suport cone Inserto Stesalite left edge",
+ phi0,dphi,nz,*zb,*rminb,*rmaxb,SSDfs);
+ Pos("SCB",1,"SCA",0.0,.0,0.0,0);
+ Za[0] = 1.; Wa[0] = ; // Hydrogen Content
+ Za[1] = 6.; Wa[1] = ; // Carbon Content
+ MixtureByWeight(SSDfs,"Inserto stealite 4411w for SSD support cone",
+ Z,W,dens,3);
+ //
+ // Now lets define the Rohacell foam material volume.
+ nz = 4;
+ Double_t *zc = new Double_t[nz];
+ Double_t *rminc = new Double_t[nz];
+ Double_t *rmaxc = new Double_t[nz];
+ zc[0] = zb[4];
+ rminc[0] = rminb[4];
+ rmaxc[0] = rmminc[0];
+ zc[1] = zb[5];
+ rmaxc[1] = rminb[5];
+ zc[2] = za[5] + ct/sintc;
+ rminc[2] = rmina[5];
+ rminc[1] = rminc[0] +(rminc[2]-rminc[0]*(zc[1]-zc[0])/(zc[2]-zc[0]);
+ zc[3] = za[6] - ct/sintc;
+ rminc[3] = rmina[6];
+ rmaxc[3] = rminc[3];
+ rmaxc[2] = rmaxc[1]+(rmaxc[3]-rmaxc[1])*(zc[2]-zc[1])/(zc[3]-zc[1]);
+ PolyCone("SCC","SSD Suport cone Rohacell foam left edge",
+ phi0,dphi,nz,*zc,*rminc,*rmaxc,SSDfs);
+ Pos("SCC",1,"SCA",0.0,.0,0.0,0);
+ Za[0] = 1.; Wa[0] = ; // Hydrogen Content
+ Za[1] = 6.; Wa[1] = ; // Carbon Content
+ MixtureByWeight(SSDfo,"Foam core (Rohacell 50A) for SSD support cone",
+ Z,W,dens,3);
+}
+//______________________________________________________________________
+void AliITSv11::SSDConeDetail(TVector3 &tran,const char moth[3]){
+ // Defines the volumes and materials for the ITS SSD Support cone.
+ // Based on drawings ALR-0767 and ALR-0767/3. Units are in mm.
+ // Inputs:
// Double_t zShift The z shift to be applied to the final volume.
// Outputs:
// none.
// Return:
// none.
Double_t *za,*rmina,*rmaxa,phi0=0.0,dphi=360.0;
- Int_t i,n,nz,nrad=0;
- Double_t Cthick=1.5; //mm, Carbon finber thickness
+ Int_t i,j,n,nz,nrad=0;
+ Double_t ct = 13.0; //mm, Thickness of Rohacell+carbon fiber
+ Double_t cthick=1.5; //mm, Carbon finber thickness
Double_t r=15.0; // mm, Radius of curvature.
Double_t tc=51.0; // angle of SSD cone [degrees].
Double_t t; // some general angle [degrees].
Int_t SSDcf=; // SSD support cone Carbon Fiber materal number.
+ Int_t SSDfs=; // SSD support cone inserto stesalite 4411w.
+ Int_t SSDfo=; // SSD support cone foam, Rohacell 50A.
SetScalemm();
// Lets start with the upper left outer carbon fiber surface.
za = new Double_t[nz];
rmina = new Double_t[nz];
rmaxa = new Double_t[nz];
-
+ //
za[0] = 0.0;
rmaxa[0] = 985./2.;
- rmina[0] = rmaxa[0] - Cthick;
+ rmina[0] = rmaxa[0] - cthick;
+ //
za[1] = 13.5 - 5.0; // The original size of 13.5 (ALR-0767) is milled down
rmaxa[1] = rmaxa[0]; // by 5mm to give a well defined reference surface
rmina[1] = rmina[0]; // (ALR-0767/3).
// The curved section is given by the following fomula
- // rmax = r*Sind(90.-t)+rmaxa[0]-r for 0<=t<=tc.
- // rmin = (r-Cthick)*Sind(90.-t)+rmina[0]-(r-Cthick) for 0<=t<=tc.
- // z = r*Cosd(90.-t)+za[1] for 0<=t<=tc.
- za[2] = (r-Cthick)*Cosd(90.-tc)+za[1];
- rmina[2] = (r-Cthick)*Sind(90.0-tc)+rmaxa[0]-(r-Cthick);
- t = 90.0 - ACosd((za[2]-za[1])/r); // angle for rmax
- rmaxa[2] = r*Sind(90.-t)+rmaxa[0]-r;
- rmaxa[3] = r*Sind(90.0-tc)+rmaxa[0]-r;
- za[3] =r*Cosd(90.-tc)+za[1];
+ // rmax = -r*Sind(t)+rmaxa[1] for 0<=t<=tc. Outer curve.
+ // rmin = -(r-cthick)*Sind(t)+rmina[1] for 0<=t<=tc. Inner curve.
+ // zout = r*Cosd(t)+za[1] for 0<=t<=tc. Outer curve.
+ // zin = (r-cthick)*Sind(t)+za[1] for 0<=t<=tx. Inner curve.
+ // We will only use a straight line between the beggining and ending points
+ // of the arch (for now at least).
+ za[2] = (r-cthick)*Sind(tc)+za[1];
+ rmina[2] = -(r-cthick)*Sind(tc)+rmina[1];
+ rmaxa[2] = za[1]+(r-cthick)*Sind(tc);
+ //
+ za[3] = r*Sind(tc)+za[1];
+ rmaxa[3] = -r*Sind(tc)+rmaxa[1];
// angled section. surface is given by the following equations
- // R = -Tand(tc)*Z + rmaxa[3] or rmina[2]
- rmina[3] = -Tand(tc)*za[3] + rmina[2];
- // Point of whole. Whole surface has fixed radius = 890.0/2 mm
- rmina[4] = 890.0/2.+Cthick ; // Inner whole surface radius (ALR-0767)
- za[4] = (rmina[4] - rmina[2])/(-Tand(tc));
- rmaxa[4] = -Tand(tc)*za[4]+rmaxa[3];
+ // Rout = -Tand(tc)*(z-za[3]) + rmaxa[3], outer surface.
+ // Rin = -Tand(tx)*(z-za[2]) + rmina2], inner surface.
+ rmina[3] = -Tand(tc)*(za[3]-za[2]) + rmina[2];
+ // Point of whole. Whole surface has fixed radius = 890.0/2 +cthick mm
+ // exclude carbon fiber covering whole.
+ rmina[4] = 890.0/2.+cthick ; // Inner whole surface radius (ALR-0767)
+ za[4] = (rmina[4] - rmina[2])/(-Tand(tc)) + za[2];
+ rmaxa[4] = -Tand(tc)*(za[4]-za[3])+rmaxa[3];
//
rmaxa[5] = rmina[4];
rmina[5] = rmina[4];
- za[5] = (rmaxa[5] - rmaxa[3])/(-Tand(tc));
- PolyCone("SCAA","SSD Suport cone Carbon Fiber Surface outer left",
+ za[5] = (rmaxa[5] - rmaxa[3])/(-Tand(tc)) +za[3];
+ //
+ PolyCone("SCA","SSD Suport cone Carbon Fiber Surface outer left",
phi0,dphi,nz,*z,*rmin,*rmax,SSDcf);
+ Pos("SCA",1,moth,trans.x(),trans.y(),trans.z(),0);
+ XMatrix(1,180.0);
+ Pos("SCA",2,moth,trans.x(),trans.y(),-trans.z(),1);
Za[0] = 1.; Wa[0] = ; // Hydrogen Content
- Za[1] = 6.; Wa[0] = ; // Carbon Content
- MixtureByWeight(SSDcf,"Carbon Fiber for SSD support cone",Z,W,dens,3);
- // Now for the Filler in the mounting regions Upper left first
- zb[0] = za[0];
+ Za[1] = 6.; Wa[1] = ; // Carbon Content
+ MixtureByWeight(SSDcf,"Carbon Fiber for SSD support cone",Z,W,dens,2);
+ //====================================================================
+ // Now for the upper left inner carbon fiber suface.
+ // Start by working backwards
+ nz = 6;
+ zd = new Double_t[nz];
+ rmind = new Double_t[nz];
+ rmaxd = new Double_t[nz];
+ // The two surfaces of this carbon fiber inner layer are given by
+ // Rout = -Tand(tc)*(z-za[3])+rmaxa[3]-ct/cosd(tc)
+ // Rin = -Tand(tc)*(z-za[3])+rmaxa[3]-(ct-cthick)/Cosd(tc)
+ rmind[4] = rmina[4]; // Stop at the same radii as part a.
+ zd[4] = (rmind[4]-rmaxa[3]+ct/Cosd(tc))/(-Tand(tc)) + za[3];
+ rmaxd[4] = -Tand(tc)*(zd[4]-za[3])+rmaxa[3]-(ct-cthick)/Cosd(tc);
+ //
+ rmind[5] = rmina[4]; // Stop at the same radii as part a.
+ rmaxd[5] = rmind[5];
+ zd[5] = (rmind[5]-rmaxa[3]+(ct-cthick)/Cosd(tc))/(-Tand(tc)) + za[3];
+ // The other easy point is the very beginning.
+ zd[0] = za[0]; // same staring z as with the outer suface.
+ rmind[0] = 945./2.;
+ rmaxd[0] = rmind[0]+cthick;
+ // The rest of this volume is defined by the lines || z axis starting
+ // at zd[0] and rmind[0]/rmaxd[0], and the lines representing the
+ // slopped surfaces defined above plus the curved sections connecting
+ // the two (covering tc degrees of arc and having a radius of r mm).
+ // The coordinate zd[1] is defined as the z coordinate of the point
+ // of intersection between the line R=rmind[0]-r and the line
+ // R=-Tand(tc)*(z-za[3])+rmaxa[3]-(ct+r)/Cosd(ct).
+ zd[1] = (rmaxa[3]+r-rmind[0])/Tand(tc)-(ct+r)/Sind(tc)+za[3];
+ rmind[1] = rmind[0];
+ rmaxd[1] = rmaxd[0];
+ //
+ zd[2] = zd[1] + r*Sind(tc);
+ rmind[2] = rmind[1] - r*Sind(rc);
+ //
+ zd[3] = zd[1] + (r+cthick)*Sind(tc);
+ rmax[3] = rmax[1] - (r+cthick)*Sind(tc);
+ // Get rmax[2] and rmin[3] from the line segments replacing the arc.
+ rmax[2] = rmaxd[1]+(rmaxd[3]-rmaxd[1])*(zd[2]-zd[1])/(zd[3]-zd[1]);
+ rmin[3] = rmind[2]+(rmind[4]-rmind[2])*(zd[3]-zd[2])/(zd[4]-dz[2]);
+ //
+ PolyCone("SCD","SSD Suport cone Carbon Fiber Surface inner left",
+ phi0,dphi,nz,*zd,*rmind,*rmaxd,SSDcf);
+ Pos("SCD",1,moth,trans.x(),trans.y(),trans.z(),0);
+ Pos("SCD",2,moth,trans.x(),trans.y(),-trans.z(),1);
+ //================================================================
+ // Now for the fill between these two volumes. There are two different
+ // materials. The line separating them goes through the points
+ // zd[2],rmind[2] and zd[3],rmaxd[3]. Starting with the Inserto Stesalite
+ // 4411w material.
+ nz = 6;
+ zb = new Double_t[nz];
+ rminb = new Double_t[nz];
+ rmaxb = new Double_t[nz];
+ //
+ zb[0] = za[0];
+ rminb[0] = rmaxd[0];
rmaxb[0] = rmina[0];
- rminb[0] = 945./2.-Cthick;
//
+ zb[1] = zd[1];
+ rminb[1] = rmaxd[1];
rmaxb[1] = rmina[1];
-
+ //
+ zb[2] = za[1];
+ rmaxb[2] = rmina[1];
+ rminb[2] = rmaxd[2]+(rmaxd[3]-rmaxd[2])*(zb[2]-zd[2])/(zd[3]-zd[2]);
+ //
+ zb[3] = za[2];
+ rmaxb[3] = rmina[2];
+ rminb[3] = rmaxd[2]+(rmaxd[3]-rmaxd[2])*(zb[3]-zd[2])/(zd[3]-zd[2]);
+ //
+ zb[4] = zd[2];
+ rminb[4] = rmind[2];
+ rmaxb[4] = rmina[2]+(rmina[3]-rmina[2])*(zb[4]-za[2])/(za[3]-za[2]);
+ //
+ zb[5] = zb[4]+(ct-2.*cthick)*Sind(tc);
+ rminb[5] = rmina[2]-(rmina[3]-rmina[2])*(zb[5]-za[2])/(za[3]-za[2]);
+ rmaxb[5] = rminb[5];
+ //
+ PolyCone("SCB","SSD Suport cone Inserto Stesalite left edge",
+ phi0,dphi,nz,*zb,*rminb,*rmaxb,SSDfs);
+ Pos("SCB",1,moth,trans.x(),trans.y(),trans.z(),0);
+ Pos("SCB",2,moth,trans.x(),trans.y(),-trans.z(),1);
+ Za[0] = 1.; Wa[0] = ; // Hydrogen Content
+ Za[1] = 6.; Wa[1] = ; // Carbon Content
+ MixtureByWeight(SSDfs,"Inserto stealite 4411w for SSD support cone",
+ Z,W,dens,3);
+ //================================================================
+ // Now for the section filled with Roacell foam.
+ nz = 4;
+ zc = new Double_t[nz];
+ rminc = new Double_t[nz];
+ rmaxc = new Double_t[nz];
+ zc[0] = zb[4];
+ rminc[0] = rminb[4];
+ rmaxc[0] = rminc[0];
+ //
+ zc[1] = zb[5];
+ rminc[1] = rmaxd[2]+(rmaxd[3]-rmaxd[2])*(zc[1]-zd[2])/(zd[3]-zd[2]);;
+ rmaxc[1] = rminb[5];
+ //
+ zc[2] = zd[5];
+ rminc[2] = rmaxd[5];
+ rmaxc[2] = rmina[2]+(rmina[3]-rmina[2])*(zc[2]-za[2])/(za[3]-za[2]);
+ //
+ zc[3] = za[4];
+ rminc[3] = rmina[4];
+ rmaxc[3] = rmina[4];
+ //
+ PolyCone("SCC","SSD Suport cone Inserto foam left edge",
+ phi0,dphi,nz,*zc,*rminc,*rmaxc,SSDfo);
+ Pos("SCC",1,moth,trans.x(),trans.y(),trans.z(),0);
+ Pos("SCC",2,moth,trans.x(),trans.y(),-trans.z(),1);
+ Za[0] = 1.; Wa[0] = ; // Hydrogen Content
+ Za[1] = 6.; Wa[1] = ; // Carbon Content
+ MixtureByWeight(SSDfo,"Foam core (Rohacell 50A) for SSD support cone",
+ Z,W,dens,3);
+ //=================================================================
+ // now for the part of the SSD cone which has the wholes in it.
+ // We now define the spoaks. Start with outer carbon fiber surface
+ // Follows the same surface as the sloped part of SCA.
+ // The Spoaks have a radius matching them to the holes. This radius (in
+ // phi) can not be reproduce.
+ Double_t sdr = 0.5*(890.-740.)+2*cthick; // length of spoak section
+ // including the carbon finber thickness covering the opening (ALR-0767).
+ phi0 = 12.5; // starting phi of spoak (centered about phi0=0).
+ dphi = 5.0; // From (ALR-0767).
+ ze = new Double_t[nz];
+ rmine = new Double_t[nz];
+ rmaxe = new Double_t[nz];
+ //
+ ze[0] = za[4];
+ rmine[0] = rmina[4];
+ rmaxe[0] = rmine[0];
+ //
+ ze[1] = za[5];
+ rmaxe[1] = rmina[5];
+ rmine[1] = rmina[2]-(rmina[4]-rmina[2])*(ze[1]-za[2])/(za[4]-za[2]);
+ //
+ rmine[2] = rmine[0] - sdr;
+ ze[2] = za[2]+(rmina[2]-rmine[2])*(za[4]-za[2])/(rmina[4]-rmina[2]);
+ rmaxe[2] = rmaxa[3]-(rmaxa[5]-rmaxa[3])*(ze[2]-za[3])/(za[5]-za[3]);
+ //
+ rmine[3] = rmine[2];
+ ze[3] = za[3]+(rmaxa[3]-rmine[3])*(za[5]-za[3])/(rmaxa[5]-rmaxa[3]);
+ rmaxe[3] = rmine[2];
+ //
+ PolyCone("SCE","SSD Suport cone carbon fiber outer surface of spoak face",
+ phi0,dphi,nz,*ze,*rmine,*rmaxe,SSDcf);
+ Pos("SCE",1,moth,trans.x(),trans.y(),trans.z(),0); // place first copy
+ for(i=1;i<12;i++){ // There are 12 spoaks around.
+ ZMatrix(1+i,((Double_t)i)*360./12.);
+ Pos("SCE",i+1,moth,trans.x(),trans.y(),trans.z(),1+i);
+ } // end for i
+ // Other side.
+ Pos("SCE",1,moth,trans.x(),trans.y(),-trans.z(),1); // place first copy
+ for(i=1;i<12;i++){ // There are 12 spoaks around.
+ Matrix(13+i,180.0,0.0,((Double_t)i)*360./12.); // ??????????
+ Pos("SCE",i+1,moth,trans.x(),trans.y(),-trans.z(),13+i);
+ } // end for i
+ //
+ //Now for the inner carbon fiber surface.
+ zf = new Double_t[nz];
+ rminf = new Double_t[nz];
+ rmaxf = new Double_t[nz];
+ //
+ zf[0] = zd[4];
+ rminf[0] = rmind[5];
+ rmaxf[0] = rmine[0];
+ //
+ zf[1] = zd[5];
+ rmaxf[1] = rmind[5];
+ rminf[1] = rmind[2]-(rmind[4]-rmind[2])*(zf[1]-zd[2])/(zd[4]-zd[2]);
+ //
+ rminf[2] = rmine[0] - sdr;
+ zf[2] = zd[2]+(rmind[2]-rminf[2])*(zd[4]-zd[2])/(rmind[4]-rmind[2]);
+ rmaxf[2] = rmaxd[3]-(rmaxd[5]-rmaxd[3])*(zf[2]-zd[3])/(zd[5]-zd[3]);
+ //
+ rminf[3] = rmine[2];
+ zf[3] = zd[3]+(rmaxd[3]-rminf[3])*(zd[5]-zd[3])/(rmaxd[5]-rmaxd[3]);
+ rmaxf[3] = rmine[2];
+ //
+ PolyCone("SCF","SSD Suport cone carbon fiber inner surface of spoak face",
+ phi0,dphi,nz,*zf,*rminf,*rmaxf,SSDcf);
+ Pos("SCF",1,moth,trans.x(),trans.y(),trans.z(),0); // place first copy
+ for(i=1;i<12;i++){ // There are 12 spoaks around.
+ Pos("SCF",i+1,moth,trans.x(),trans.y(),trans.z(),1+i);
+ } // end for i
+ // Other side.
+ Pos("SCF",1,moth,trans.x(),trans.y(),-trans.z(),1); // place first copy
+ for(i=1;i<12;i++){ // There are 12 spoaks around.
+ Pos("SCF",i+1,moth,trans.x(),trans.y(),-trans.z(),13+i);
+ } // end for i
+ //
+ // Now for the foam filling of this spoak
+ zg = new Double_t[nz];
+ rming = new Double_t[nz];
+ rmaxg = new Double_t[nz];
+ //
+ phi0 = phi0+cthick/(0.25*(890.+740.));// Make space for Carbon fiber
+ dphi = dphi-cthick/(0.25*(890.+740.));// covering hole on both sides.
+ // thickness of this covering ic cthick. As given above it varies allong
+ // the length of the spoak. No other solusion
+ //
+ zg[0] = zf[1];
+ rming[0] = rmaxf[1];
+ rmaxg[0] = rming[0];
+ //
+ zg[1] = ze[0];
+ rmaxg[1] = rmine[0];
+ rming[1] = rmind[2]-(rmind[4]-rmind[2])*(zg[1]-zd[2])/(zd[4]-zd[2]);
+ //
+ rming[2] = rminf[3];
+ zg[2] = zd[2]+(rmind[2]-rming[2])*(zd[4]-zd[2])/(rmind[4]-rmind[2]);
+ rmaxg[2] = rmaxd[3]-(rmaxd[5]-rmaxd[3])*(zg[2]-zd[3])/(zd[5]-zd[3]);
+ //
+ rming[3] = rmine[2];
+ zg[3] = zd[3]+(rmaxd[3]-rming[3])*(zd[5]-zd[3])/(rmaxd[5]-rmaxd[3]);
+ rmaxg[3] = rming[3];
+ //
+ PolyCone("SCG","SSD Suport cone spoak foam filling",
+ phi0,dphi,nz,*zg,*rming,*rmaxg,SSDfo);
+ Pos("SCG",1,moth,trans.x(),trans.y(),trans.z(),0); // place first copy
+ for(i=1;i<12;i++){ // There are 12 spoaks around.
+ Pos("SCG",i+1,moth,trans.x(),trans.y(),trans.z(),1+i);
+ } // end for i
+ // Other side.
+ Pos("SCG",1,moth,trans.x(),trans.y(),-trans.z(),1); // place first copy
+ for(i=1;i<12;i++){ // There are 12 spoaks around.
+ Pos("SCG",i+1,moth,trans.x(),trans.y(),-trans.z(),13+i);
+ } // end for i
+ //============================================================
+ // now for the carbon fiber covering the top of this hole.
+ nz = 4;
+ zh = new Double_t[nz];
+ rminh = new Double_t[nz];
+ rmaxh = new Double_t[nz];
+ //
+ phi0= -12.5;
+ dphi= 25.0;
+ //
+ rmaxh[0]=rmaxa[5];
+ rminh[0]=rmaxh[0]-cthick;
+ zh[0]=;
+ //
+ rmaxh[1]=rmaxh[0];
+ rminh[1]=rminh[0];
+ zh[1] = ;
+ //
+ PolyCone("SCI","SSD Suport cone carbon fiber inner top surface of hole",
+ phi0,dphi,nz,*zi,*rmini,*rmaxi,SSDcf);
+ //Pos("SCI",1,moth,trans.x(),trans.y(),trans.z(),0);
+ //Pos("SCI",2,moth,trans.x(),trans.y(),-trans.z(),1);
+ //
+ // now for the carbon fiber covering the bottom of this hole.
+ nz = 4;
+ zj = new Double_t[nz];
+ rminj = new Double_t[nz];
+ rmaxj = new Double_t[nz];
+ //
+ rmaxj[0]=rmaxe[4];
+ rminj[0]=rmaxj[0]-cthick;
+ zj[0]=;
+ //
+ rmaxj[1]=rmaxj[0];
+ rminj[1]=rminj[0];
+ zj[1]= ;
+ //
+ PolyCone("SCJ","SSD Suport cone carbon fiber inner bottom surface of hole",
+ phi0,dphi,nz,*zi,*rmini,*rmaxi,SSDcf);
+ //Pos("SCJ",1,moth,trans.x(),trans.y(),trans.z(),0);
+ //Pos("SCJ",2,moth,trans.x(),trans.y(),-trans.z(),1);
+ //
+ //Now for the carbon fiber on the sides of the spoakes.
+ //==============================================================
delete[] za;delete[] rmina;delete[] rmaxa;
+ delete[] zb;delete[] rminb;delete[] rmaxb;
+ delete[] zc;delete[] rminc;delete[] rmaxc;
+ delete[] zd;delete[] rmind;delete[] rmaxd;
+ delete[] ze;delete[] rmine;delete[] rmaxe;
+ delete[] zf;delete[] rminf;delete[] rmaxf;
+ delete[] zg;delete[] rming;delete[] rmaxg;
+ delete[] zh;delete[] rminh;delete[] rmaxh;
+ delete[] zi;delete[] rmini;delete[] rmaxi;
+ delete[] zj;delete[] rminj;delete[] rmaxj;
// Set back to cm default scale before exiting.
SetScalecm();
return;
git://git.uio.no / u / mrichter / AliRoot.git / commitdiff