// //
///////////////////////////////////////////////////////////////////////////////
-#include "TMath.h"
+#include <TMath.h>
#include "AliLog.h"
+
#include "AliTRDcluster.h"
#include "AliTRDgeometry.h"
#include "AliTRDCommonParam.h"
}
//___________________________________________________________________________
-AliTRDcluster::AliTRDcluster(Int_t det, UChar_t col, UChar_t row, UChar_t time, const Short_t *sig, UShort_t vid)
+AliTRDcluster::AliTRDcluster(Int_t det, UChar_t col, UChar_t row, UChar_t time
+ , const Short_t *sig, UShort_t vid)
:AliCluster()
,fPadCol(col)
,fPadRow(row)
//___________________________________________________________________________
AliTRDcluster::AliTRDcluster(Int_t det, Float_t q
, Float_t *pos, Float_t *sig
- , Int_t *tracks, Char_t npads, Short_t *signals
+ , Int_t *tracks, Char_t npads, Short_t * const signals
, UChar_t col, UChar_t row, UChar_t time
, Char_t timebin, Float_t center, UShort_t volid)
:AliCluster(volid,pos[0],pos[1],pos[2],sig[0],sig[1],0.0,0x0)
}
//_____________________________________________________________________________
-void AliTRDcluster::AddTrackIndex(Int_t *track)
+AliTRDcluster &AliTRDcluster::operator=(const AliTRDcluster &c)
+{
+ //
+ // Assignment operator
+ //
+
+ if (this != &c) {
+ ((AliTRDcluster &) c).Copy(*this);
+ }
+
+ return *this;
+
+}
+
+//_____________________________________________________________________________
+void AliTRDcluster::AddTrackIndex(const Int_t * const track)
{
//
// Adds track index. Currently assumed that track is an array of
//___________________________________________________________________________
Double_t AliTRDcluster::GetSX(Int_t tb, Double_t z)
{
-// Returns the error parameterization in the radial direction for TRD clusters as function of
-// the calibrated time bin (tb) and optionally distance to anode wire (z). By default (no z information)
-// the mean value over all cluster to wire distance is chosen.
-//
-// There are several contributions which are entering in the definition of the radial errors of the clusters.
-// Although an analytic defition should be possible for the moment this is not yet available but instead a
-// numerical parameterization is provided (see AliTRDclusterResolution::ProcessSigma() for the calibration
-// method). The result is displayed in the figure below as a 2D plot and also as the projection on the drift axis.
-//
-//Begin_Html
-//<img src="TRD/clusterXerrorDiff2D.gif">
-//End_Html
-//
-// Here is a list of uncertainty components:
-// - Time Response Function (TRF) - the major contribution. since TRF is also not symmetric (even if tail is
-// cancelled) it also creates a systematic shift dependent on the charge distribution before and after the cluster.
-// - longitudinal diffusion - increase the width of TRF and scales with square root of drift length
-// - variation in the drift velocity within the drift cell
-//
-// Author
-// A.Bercuci <A.Bercuci@gsi.de>
+ //
+ // Returns the error parameterization in the radial direction for TRD clusters as function of
+ // the calibrated time bin (tb) and optionally distance to anode wire (z). By default (no z information)
+ // the mean value over all cluster to wire distance is chosen.
+ //
+ // There are several contributions which are entering in the definition of the radial errors of the clusters.
+ // Although an analytic defition should be possible for the moment this is not yet available but instead a
+ // numerical parameterization is provided (see AliTRDclusterResolution::ProcessSigma() for the calibration
+ // method). The result is displayed in the figure below as a 2D plot and also as the projection on the drift axis.
+ //
+ //Begin_Html
+ //<img src="TRD/clusterXerrorDiff2D.gif">
+ //End_Html
+ //
+ // Here is a list of uncertainty components:
+ // - Time Response Function (TRF) - the major contribution. since TRF is also not symmetric (even if tail is
+ // cancelled) it also creates a systematic shift dependent on the charge distribution before and after the cluster.
+ // - longitudinal diffusion - increase the width of TRF and scales with square root of drift length
+ // - variation in the drift velocity within the drift cell
+ //
+ // Author
+ // A.Bercuci <A.Bercuci@gsi.de>
+ //
if(tb<1 || tb>=24) return 10.; // return huge [10cm]
const Double_t sx[24][10]={
Double_t m = 0.; for(Int_t id=10; id--;) m+=sx[tb][id];
return m*.1;
+
}
//___________________________________________________________________________
Double_t AliTRDcluster::GetSYdrift(Int_t tb, Int_t ly, Double_t/* z*/)
{
-// Returns the error parameterization for TRD clusters as function of the drift length (here calibrated time bin tb)
-// and optionally distance to anode wire (z) for the LUT r-phi cluster shape. By default (no z information) the largest
-// value over all cluster to wire values is chosen.
-//
-// For the LUT method the dependence of s_y with x and d is obtained via a fit to the cluster to MC
-// resolution. (see class AliTRDclusterResolution for more details). A normalization to the reference radial position
-// x0 = 0.675 (tb=5 for ideal vd) is also applied (see GetSYprf()). The function is *NOT* calibration aware !
-// The result is displayed in the figure below as a 2D plot and also as the projection on the drift axis. A comparison
-// with the GAUS parameterization is also given
-//
-// For the GAUS method the dependence of s_y with x is *analytic* and it is expressed by the relation.
-// BEGIN_LATEX
-// #sigma^{2}_{y} = #sigma^{2}_{PRF} + #frac{x#delta_{t}^{2}}{(1+tg(#alpha_{L}))^{2}}
-// END_LATEX
-// The result is displayed in the figure below as function of the drift time and compared with the LUT parameterization.
-//Begin_Html
-//<img src="TRD/clusterYerrorDiff2D.gif">
-//<img src="TRD/clusterYerrorDiff1D.gif">
-//End_Html
-//
-// Author
-// A.Bercuci <A.Bercuci@gsi.de>
-
+ //
+ // Returns the error parameterization for TRD clusters as function of the drift length (here calibrated time bin tb)
+ // and optionally distance to anode wire (z) for the LUT r-phi cluster shape. By default (no z information) the largest
+ // value over all cluster to wire values is chosen.
+ //
+ // For the LUT method the dependence of s_y with x and d is obtained via a fit to the cluster to MC
+ // resolution. (see class AliTRDclusterResolution for more details). A normalization to the reference radial position
+ // x0 = 0.675 (tb=5 for ideal vd) is also applied (see GetSYprf()). The function is *NOT* calibration aware !
+ // The result is displayed in the figure below as a 2D plot and also as the projection on the drift axis. A comparison
+ // with the GAUS parameterization is also given
+ //
+ // For the GAUS method the dependence of s_y with x is *analytic* and it is expressed by the relation.
+ // BEGIN_LATEX
+ // #sigma^{2}_{y} = #sigma^{2}_{PRF} + #frac{x#delta_{t}^{2}}{(1+tg(#alpha_{L}))^{2}}
+ // END_LATEX
+ // The result is displayed in the figure below as function of the drift time and compared with the LUT parameterization.
+ //Begin_Html
+ //<img src="TRD/clusterYerrorDiff2D.gif">
+ //<img src="TRD/clusterYerrorDiff1D.gif">
+ //End_Html
+ //
+ // Author
+ // A.Bercuci <A.Bercuci@gsi.de>
+ //
if(tb<1 || tb>=24) return 10.; // return huge [10cm]
const Float_t lSy[6][24] = {
//___________________________________________________________________________
Double_t AliTRDcluster::GetSYcharge(Float_t q)
{
-// Parameterization of the r-phi resolution component due to cluster charge.
-// The value is the offset from the nominal cluster resolution defined as the
-// cluster resolution at average cluster charge (q0).
-//
-// BEGIN_LATEX
-// #Delta #sigma_{y}(q) = a*(#frac{1}{q} - #frac{1}{q_{0}})
-// q_{0} #approx 50
-// END_LATEX
-// The definition is *NOT* robust against gain fluctuations and thus two approaches are possible
-// when residual miscalibration are available:
-// - determine parameterization with a resolution matching those of the gain
-// - define an analytic model which scales with the gain.
-//
-// For more details please see AliTRDclusterResolution::ProcessCharge()
-//
-//Begin_Html
-//<img src="TRD/clusterQerror.gif">
-//End_Html
-//
-// Author
-// A.Bercuci <A.Bercuci@gsi.de>
+ //
+ // Parameterization of the r-phi resolution component due to cluster charge.
+ // The value is the offset from the nominal cluster resolution defined as the
+ // cluster resolution at average cluster charge (q0).
+ //
+ // BEGIN_LATEX
+ // #Delta #sigma_{y}(q) = a*(#frac{1}{q} - #frac{1}{q_{0}})
+ // q_{0} #approx 50
+ // END_LATEX
+ // The definition is *NOT* robust against gain fluctuations and thus two approaches are possible
+ // when residual miscalibration are available:
+ // - determine parameterization with a resolution matching those of the gain
+ // - define an analytic model which scales with the gain.
+ //
+ // For more details please see AliTRDclusterResolution::ProcessCharge()
+ //
+ //Begin_Html
+ //<img src="TRD/clusterQerror.gif">
+ //End_Html
+ //
+ // Author
+ // A.Bercuci <A.Bercuci@gsi.de>
+ //
const Float_t sq0inv = 0.019962; // [1/q0]
const Float_t sqb = 0.037328; // [cm]
//___________________________________________________________________________
Double_t AliTRDcluster::GetSYprf(Int_t ly, Double_t center, Double_t s2)
{
-// Parameterization of the cluster error in the r-phi direction due to charge sharing between
-// adiacent pads. Should be identical to what is provided in the OCDB as PRF [TODO]
-//
-// The parameterization is obtained from fitting cluster resolution at phi=exb and |x-0.675|<0.225.
-// For more details see AliTRDclusterResolution::ProcessCenter().
-//
-//Begin_Html
-//<img src="TRD/clusterPRFerror.gif">
-//End_Html
-//
-// Author
-// A.Bercuci <A.Bercuci@gsi.de>
+ //
+ // Parameterization of the cluster error in the r-phi direction due to charge sharing between
+ // adiacent pads. Should be identical to what is provided in the OCDB as PRF [TODO]
+ //
+ // The parameterization is obtained from fitting cluster resolution at phi=exb and |x-0.675|<0.225.
+ // For more details see AliTRDclusterResolution::ProcessCenter().
+ //
+ //Begin_Html
+ //<img src="TRD/clusterPRFerror.gif">
+ //End_Html
+ //
+ // Author
+ // A.Bercuci <A.Bercuci@gsi.de>
+ //
/* const Float_t scy[AliTRDgeometry::kNlayer][4] = {
{2.827e-02, 9.600e-04, 4.296e-01, 2.271e-02},
//___________________________________________________________________________
Double_t AliTRDcluster::GetXcorr(Int_t tb, Double_t z)
{
-// Drift length correction [cm]. Due to variation of mean drift velocity along the drift region
-// from nominal vd at xd->infinity. For drift velocity determination based on tracking information
-// the correction should be negligible.
-//Begin_Html
-//<img src="TRD/clusterXcorr.gif">
-//End_Html
-// TODO to be parametrized in term of drift velocity at infinite drift length
-// A.Bercuci (Mar 28 2009)
+ //
+ // Drift length correction [cm]. Due to variation of mean drift velocity along the drift region
+ // from nominal vd at xd->infinity. For drift velocity determination based on tracking information
+ // the correction should be negligible.
+ //Begin_Html
+ //<img src="TRD/clusterXcorr.gif">
+ //End_Html
+ // TODO to be parametrized in term of drift velocity at infinite drift length
+ // A.Bercuci (Mar 28 2009)
+ //
if(tb<0 || tb>=24) return 0.;
const Int_t nd = 5;
//___________________________________________________________________________
Double_t AliTRDcluster::GetYcorr(Int_t ly, Float_t y)
{
-// PRF correction for the LUT r-phi cluster shape.
-//Begin_Html
-//<img src="TRD/clusterYcorr.gif">
-//End_Html
+ //
+ // PRF correction for the LUT r-phi cluster shape.
+ //Begin_Html
+ //<img src="TRD/clusterYcorr.gif">
+ //End_Html
+ //
const Float_t cy[AliTRDgeometry::kNlayer][3] = {
{ 4.014e-04, 8.605e-03, -6.880e+00},
}
//_____________________________________________________________________________
-Float_t AliTRDcluster::GetXloc(Double_t t0, Double_t vd, Double_t *const /*q*/, Double_t *const /*xq*/, Double_t /*z*/)
+Float_t AliTRDcluster::GetXloc(Double_t t0, Double_t vd
+ , const Double_t *const /*q*/
+ , const Double_t *const /*xq*/
+ , Double_t /*z*/)
{
-//
-// (Re)Calculate cluster position in the x direction in local chamber coordinates (with respect to the anode wire
-// position) using all available information from tracking.
-// Input parameters:
-// t0 - calibration aware trigger delay [us]
-// vd - drift velocity in the region of the cluster [cm/us]
-// z - distance to the anode wire [cm]. By default average over the drift cell width.
-// q & xq - array of charges and cluster positions from previous clusters in the tracklet [a.u.]
-// Output values :
-// return x position of the cluster with respect to the
-// anode wire using all tracking information
-//
-// The estimation of the radial position is based on calculating the drift time and the drift velocity at the point of
-// estimation. The drift time can be estimated according to the expression:
-// BEGIN_LATEX
-// t_{drift} = t_{bin} - t_{0} - t_{cause}(x) - t_{TC}(q_{i-1}, q_{i-2}, ...)
-// END_LATEX
-// where t_0 is the delay of the trigger signal. t_cause is the causality delay between ionisation electrons hitting
-// the anode and the registration of maximum signal by the electronics - it is due to the rising time of the TRF
-// A second order correction here comes from the fact that the time spreading of charge at anode is the convolution of
-// TRF with the diffusion and thus cross-talk between clusters before and after local clusters changes with drift length.
-// t_TC is the residual charge from previous (in time) clusters due to residual tails after tail cancellation.
-// This tends to push cluster forward and depends on the magnitude of their charge.
-//
-// The drift velocity varies with the drift length (and distance to anode wire) as described by cell structure simulation.
-// Thus one, in principle, can calculate iteratively the drift length from the expression:
-// BEGIN_LATEX
-// x = t_{drift}(x)*v_{drift}(x)
-// END_LATEX
-// In practice we use a numerical approach (AliTRDcluster::GetXcorr()) to correct for anisochronity obtained from MC
-// comparison (see AliTRDclusterResolution::ProcessSigma()). Also the calibration of 0 approximation (no x dependence)
-// for t_cause is obtained from MC comparisons and impossible to disentangle in real life from trigger delay.
-//
-// Author
-// Alex Bercuci <A.Bercuci@gsi.de>
-//
+ //
+ // (Re)Calculate cluster position in the x direction in local chamber coordinates (with respect to the anode wire
+ // position) using all available information from tracking.
+ // Input parameters:
+ // t0 - calibration aware trigger delay [us]
+ // vd - drift velocity in the region of the cluster [cm/us]
+ // z - distance to the anode wire [cm]. By default average over the drift cell width.
+ // q & xq - array of charges and cluster positions from previous clusters in the tracklet [a.u.]
+ // Output values :
+ // return x position of the cluster with respect to the
+ // anode wire using all tracking information
+ //
+ // The estimation of the radial position is based on calculating the drift time and the drift velocity at the point of
+ // estimation. The drift time can be estimated according to the expression:
+ // BEGIN_LATEX
+ // t_{drift} = t_{bin} - t_{0} - t_{cause}(x) - t_{TC}(q_{i-1}, q_{i-2}, ...)
+ // END_LATEX
+ // where t_0 is the delay of the trigger signal. t_cause is the causality delay between ionisation electrons hitting
+ // the anode and the registration of maximum signal by the electronics - it is due to the rising time of the TRF
+ // A second order correction here comes from the fact that the time spreading of charge at anode is the convolution of
+ // TRF with the diffusion and thus cross-talk between clusters before and after local clusters changes with drift length.
+ // t_TC is the residual charge from previous (in time) clusters due to residual tails after tail cancellation.
+ // This tends to push cluster forward and depends on the magnitude of their charge.
+ //
+ // The drift velocity varies with the drift length (and distance to anode wire) as described by cell structure simulation.
+ // Thus one, in principle, can calculate iteratively the drift length from the expression:
+ // BEGIN_LATEX
+ // x = t_{drift}(x)*v_{drift}(x)
+ // END_LATEX
+ // In practice we use a numerical approach (AliTRDcluster::GetXcorr()) to correct for anisochronity obtained from MC
+ // comparison (see AliTRDclusterResolution::ProcessSigma()). Also the calibration of 0 approximation (no x dependence)
+ // for t_cause is obtained from MC comparisons and impossible to disentangle in real life from trigger delay.
+ //
+ // Author
+
// Alex Bercuci <A.Bercuci@gsi.de>
+ //
AliTRDCommonParam *cp = AliTRDCommonParam::Instance();
Double_t fFreq = cp->GetSamplingFrequency();
}
//_____________________________________________________________________________
-Float_t AliTRDcluster::GetYloc(Double_t y0, Double_t s2, Double_t W, Double_t *const y1, Double_t *const y2)
+Float_t AliTRDcluster::GetYloc(Double_t y0, Double_t s2, Double_t W
+ , Double_t *const y1, Double_t *const y2)
{
-// Calculate, in tracking cooordinate system, the r-phi offset the cluster from the middle of the center pad. Three possible methods are implemented:
-// - Center of Gravity (COG) see AliTRDcluster::GetDYcog()
-// - Look-up Table (LUT) see AliTRDcluster::GetDYlut()
-// - Gauss shape (GAUS) see AliTRDcluster::GetDYgauss()
-// In addition for the case of LUT method position corrections are also applied (see AliTRDcluster::GetYcorr())
+ //
+ // Calculate, in tracking cooordinate system, the r-phi offset the cluster
+ // from the middle of the center pad. Three possible methods are implemented:
+ // - Center of Gravity (COG) see AliTRDcluster::GetDYcog()
+ // - Look-up Table (LUT) see AliTRDcluster::GetDYlut()
+ // - Gauss shape (GAUS) see AliTRDcluster::GetDYgauss()
+ // In addition for the case of LUT method position corrections are also
+ // applied (see AliTRDcluster::GetYcorr())
+ //
if(IsRPhiMethod(kCOG)) GetDYcog();
else if(IsRPhiMethod(kLUT)) GetDYlut();
//___________________________________________________________________________
void AliTRDcluster::SetSigmaY2(Float_t s2, Float_t dt, Float_t exb, Float_t x, Float_t z, Float_t tgp)
{
-// Set variance of TRD cluster in the r-phi direction for each method.
-// Parameters :
-// - s2 - variance due to PRF width for the case of Gauss model. Replaced by parameterization in case of LUT.
-// - dt - transversal diffusion coeficient
-// - exb - tg of lorentz angle
-// - x - drift length - with respect to the anode wire
-// - z - offset from the anode wire
-// - tgp - local tangent of the track momentum azimuthal angle
-//
-// The ingredients from which the error is computed are:
-// - PRF (charge sharing on adjacent pads) - see AliTRDcluster::GetSYprf()
-// - diffusion (dependence with drift length and [2nd order] distance to anode wire) - see AliTRDcluster::GetSYdrift()
-// - charge of the cluster (complex dependence on gain and tail cancellation) - see AliTRDcluster::GetSYcharge()
-// - lorentz angle (dependence on the drift length and [2nd order] distance to anode wire) - see AliTRDcluster::GetSX()
-// - track angle (superposition of charges on the anode wire) - see AliTRDseedV1::Fit()
-// - projection of radial(x) error on r-phi due to fixed value assumed in tracking for x - see AliTRDseedV1::Fit()
-//
-// The last 2 contributions to cluster error can be estimated only during tracking when the track angle
-// is known (tgp). For this reason the errors (and optional position) of TRD clusters are recalculated during
-// tracking and thus clusters attached to tracks might differ from bare clusters.
-//
-// Taking into account all contributions one can write the the TRD cluster error parameterization as:
-// BEGIN_LATEX
-// #sigma_{y}^{2} = (#sigma_{diff}*Gauss(0, s_{ly}) + #delta_{#sigma}(q))^{2} + tg^{2}(#alpha_{L})*#sigma_{x}^{2} + tg^{2}(#phi-#alpha_{L})*#sigma_{x}^{2}+[tg(#phi-#alpha_{L})*tg(#alpha_{L})*x]^{2}/12
-// END_LATEX
-// From this formula one can deduce a that the simplest calibration method for PRF and diffusion contributions is
-// by measuring resolution at B=0T and phi=0. To disentangle further the two remaining contributions one has
-// to represent s2 as a function of drift length.
-//
-// In the gaussian model the diffusion contribution can be expressed as:
-// BEGIN_LATEX
-// #sigma^{2}_{y} = #sigma^{2}_{PRF} + #frac{x#delta_{t}^{2}}{(1+tg(#alpha_{L}))^{2}}
-// END_LATEX
-// thus resulting the PRF contribution. For the case of the LUT model both contributions have to be determined from
-// the fit (see AliTRDclusterResolution::ProcessCenter() for details).
-//
-// Author:
-// A.Bercuci <A.Bercuci@gsi.de>
+ //
+ // Set variance of TRD cluster in the r-phi direction for each method.
+ // Parameters :
+ // - s2 - variance due to PRF width for the case of Gauss model. Replaced by parameterization in case of LUT.
+ // - dt - transversal diffusion coeficient
+ // - exb - tg of lorentz angle
+ // - x - drift length - with respect to the anode wire
+ // - z - offset from the anode wire
+ // - tgp - local tangent of the track momentum azimuthal angle
+ //
+ // The ingredients from which the error is computed are:
+ // - PRF (charge sharing on adjacent pads) - see AliTRDcluster::GetSYprf()
+ // - diffusion (dependence with drift length and [2nd order] distance to anode wire) - see AliTRDcluster::GetSYdrift()
+ // - charge of the cluster (complex dependence on gain and tail cancellation) - see AliTRDcluster::GetSYcharge()
+ // - lorentz angle (dependence on the drift length and [2nd order] distance to anode wire) - see AliTRDcluster::GetSX()
+ // - track angle (superposition of charges on the anode wire) - see AliTRDseedV1::Fit()
+ // - projection of radial(x) error on r-phi due to fixed value assumed in tracking for x - see AliTRDseedV1::Fit()
+ //
+ // The last 2 contributions to cluster error can be estimated only during tracking when the track angle
+ // is known (tgp). For this reason the errors (and optional position) of TRD clusters are recalculated during
+ // tracking and thus clusters attached to tracks might differ from bare clusters.
+ //
+ // Taking into account all contributions one can write the the TRD cluster error parameterization as:
+ // BEGIN_LATEX
+ // #sigma_{y}^{2} = (#sigma_{diff}*Gauss(0, s_{ly}) + #delta_{#sigma}(q))^{2} + tg^{2}(#alpha_{L})*#sigma_{x}^{2} + tg^{2}(#phi-#alpha_{L})*#sigma_{x}^{2}+[tg(#phi-#alpha_{L})*tg(#alpha_{L})*x]^{2}/12
+ // END_LATEX
+ // From this formula one can deduce a that the simplest calibration method for PRF and diffusion contributions is
+ // by measuring resolution at B=0T and phi=0. To disentangle further the two remaining contributions one has
+ // to represent s2 as a function of drift length.
+ //
+ // In the gaussian model the diffusion contribution can be expressed as:
+ // BEGIN_LATEX
+ // #sigma^{2}_{y} = #sigma^{2}_{PRF} + #frac{x#delta_{t}^{2}}{(1+tg(#alpha_{L}))^{2}}
+ // END_LATEX
+ // thus resulting the PRF contribution. For the case of the LUT model both contributions have to be determined from
+ // the fit (see AliTRDclusterResolution::ProcessCenter() for details).
+ //
+ // Author:
+ // A.Bercuci <A.Bercuci@gsi.de>
+ //
Float_t sigmaY2 = 0.;
Int_t ly = AliTRDgeometry::GetLayer(fDetector);
sigmaY2+= tgg*x*x*exb2/12.; //printf("angle[%6.2f]\n", 1.e4*TMath::Sqrt(sigmaY2));
AliCluster::SetSigmaY2(sigmaY2);
+
}
//_____________________________________________________________________________
if ( IsUsed() != inCluster->IsUsed() ) return kFALSE;
return kTRUE;
+
}
//_____________________________________________________________________________
void AliTRDcluster::Print(Option_t *o) const
{
+ //
+ // Print cluster information
+ //
+
AliInfo(Form("Det[%3d] LTrC[%+6.2f %+6.2f %+6.2f] Q[%5.1f] FLAG[in(%c) use(%c) sh(%c)] Y[%s]",
fDetector, GetX(), GetY(), GetZ(), fQ,
IsInChamber() ? 'y' : 'n',
));
if(strcmp(o, "a")!=0) return;
- AliInfo(Form("LChC[c(%3d) r(%2d) t(%2d)] t-t0[%2d] Npad[%d] cen[%5.3f] mask[%d]", fPadCol, fPadRow, fPadTime, fLocalTimeBin, fNPads, fCenter, fClusterMasking));
- AliInfo(Form("Signals[%3d %3d %3d %3d %3d %3d %3d]", fSignals[0], fSignals[1], fSignals[2], fSignals[3], fSignals[4], fSignals[5], fSignals[6]));
-}
+ AliInfo(Form("LChC[c(%3d) r(%2d) t(%2d)] t-t0[%2d] Npad[%d] cen[%5.3f] mask[%d]"
+ , fPadCol, fPadRow, fPadTime, fLocalTimeBin, fNPads, fCenter, fClusterMasking));
+ AliInfo(Form("Signals[%3d %3d %3d %3d %3d %3d %3d]"
+ , fSignals[0], fSignals[1], fSignals[2], fSignals[3]
+ , fSignals[4], fSignals[5], fSignals[6]));
+}
//_____________________________________________________________________________
void AliTRDcluster::SetPadMaskedPosition(UChar_t position)
{
//
- // store the pad corruption position code
+ // Store the pad corruption position code
//
// Code: 1 = left cluster
// 2 = middle cluster;
// 4 = right cluster
//
- for(Int_t ipos = 0; ipos < 3; ipos++)
- if(TESTBIT(position, ipos))
+
+ for (Int_t ipos = 0; ipos < 3; ipos++) {
+ if (TESTBIT(position, ipos))
SETBIT(fClusterMasking, ipos);
+ }
}
//_____________________________________________________________________________
void AliTRDcluster::SetPadMaskedStatus(UChar_t status)
{
//
- // store the status of the corrupted pad
+ // Store the status of the corrupted pad
//
// Code: 2 = noisy
// 4 = Bridged Left
// 8 = Bridged Right
// 32 = Not Connected
- for(Int_t ipos = 0; ipos < 5; ipos++)
+ //
+
+ for (Int_t ipos = 0; ipos < 5; ipos++) {
if(TESTBIT(status, ipos))
SETBIT(fClusterMasking, ipos + 3);
+ }
+
}
//___________________________________________________________________________
-Float_t AliTRDcluster::GetDYcog(Double_t *const, Double_t *const)
+Float_t AliTRDcluster::GetDYcog(const Double_t *const, const Double_t *const)
{
-//
-// Get COG position
-// Used for clusters with more than 3 pads - where LUT not applicable
-//
+ //
+ // Get COG position
+ // Used for clusters with more than 3 pads - where LUT not applicable
+ //
+
Double_t sum = fSignals[1]
+fSignals[2]
+fSignals[3]
// Go to 3 pad COG ????
// ???????????? CBL
fCenter = (0.0 * (-fSignals[1] + fSignals[5])
- + (-fSignals[2] + fSignals[4])) / sum;
+ + (-fSignals[2] + fSignals[4])) / sum;
return fCenter;
}
//___________________________________________________________________________
-Float_t AliTRDcluster::GetDYlut(Double_t *const, Double_t *const)
+Float_t AliTRDcluster::GetDYlut(const Double_t *const, const Double_t *const)
{
//
// Calculates the cluster position using the lookup table.
class AliTRDcluster : public AliCluster {
public:
+
enum ETRDclusterStatus {
kInChamber = BIT(16) // Out of fiducial volume of chamber (signal tails)
,kFivePad = BIT(17) // Deconvoluted clusters
AliTRDcluster();
AliTRDcluster(Int_t det, UChar_t col, UChar_t row, UChar_t time, const Short_t *sig, UShort_t volid);
- AliTRDcluster(
- Int_t det, Float_t q, Float_t *pos, Float_t *sig,
- Int_t *tracks, Char_t npads, Short_t *signals,
- UChar_t col, UChar_t row, UChar_t time,
- Char_t timebin, Float_t center, UShort_t volid);
+ AliTRDcluster(Int_t det, Float_t q, Float_t *pos, Float_t *sig
+ , Int_t *tracks, Char_t npads, Short_t * const signals
+ , UChar_t col, UChar_t row, UChar_t time
+ , Char_t timebin, Float_t center, UShort_t volid);
AliTRDcluster(const AliTRDtrackletWord *const tracklet, Int_t det, UShort_t volid);
AliTRDcluster(const AliTRDcluster &c);
virtual ~AliTRDcluster() {};
+ AliTRDcluster &operator=(const AliTRDcluster &c);
- virtual void AddTrackIndex(Int_t *i);
- void Clear(Option_t *o="");
+ virtual void AddTrackIndex(const Int_t * const i);
+ void Clear(Option_t *o="");
- Bool_t IsEqual(const TObject *otherCluster) const;
- Bool_t IsInChamber() const { return TestBit(kInChamber); }
- Bool_t IsMasked() const { return fClusterMasking ? kTRUE : kFALSE; }
- Bool_t IsShared() const { return IsClusterShared();}
- Bool_t IsUsed() const { return IsClusterUsed(); }
- Bool_t IsFivePad() const { return TestBit(kFivePad);}
- inline Bool_t IsRPhiMethod(ETRDclusterStatus m) const;
-
- UChar_t GetPadMaskedPosition() const { return fClusterMasking & 7; }
- UChar_t GetPadMaskedStatus() const { return fClusterMasking >> 3; }
- Int_t GetDetector() const { return fDetector; }
- Int_t GetLocalTimeBin() const { return fLocalTimeBin; }
- Float_t GetQ() const { return fQ; }
- Int_t GetNPads() const { return fNPads; }
- Float_t GetCenter() const { return fCenter; }
- Int_t GetPadCol() const { return fPadCol; }
- Int_t GetPadRow() const { return fPadRow; }
- Int_t GetPadTime() const { return fPadTime; }
- Short_t *GetSignals() { return fSignals; }
- Float_t GetSumS() const;
- static Double_t GetSX(Int_t tb, Double_t z=-1);
- static Double_t GetSYdrift(Int_t tb, Int_t ly=0, Double_t z=-1);
- static Double_t GetSYcharge(Float_t q);
- static Double_t GetSYprf(Int_t ly, Double_t center, Double_t s2);
- static Double_t GetXcorr(Int_t tb, Double_t z=-1);
- static Double_t GetYcorr(Int_t ly, Float_t y);
- Float_t GetXloc(Double_t t0, Double_t vd, Double_t *const q=0x0, Double_t *const xq=0x0, Double_t z = 0.2);
- Float_t GetYloc(Double_t y0, Double_t s2, Double_t W, Double_t *const y1=0x0, Double_t *const y2=0x0);
-
- void Print(Option_t* o="") const;
-
- void SetLocalTimeBin(Char_t t) { fLocalTimeBin = t; }
- void SetInChamber(Bool_t in = kTRUE) { SetBit(kInChamber,in); }
- void SetNPads(Int_t n) { fNPads = n; }
- void SetPadMaskedPosition(UChar_t position);
- void SetPadMaskedStatus(UChar_t status);
- void SetPadCol(UChar_t inPadCol){ fPadCol = inPadCol;}
- void SetPadRow(UChar_t inPadRow){ fPadRow = inPadRow;}
- void SetPadTime(UChar_t inPadTime){ fPadTime = inPadTime;}
+ Bool_t IsEqual(const TObject *otherCluster) const;
+ Bool_t IsInChamber() const { return TestBit(kInChamber); }
+ Bool_t IsMasked() const { return fClusterMasking ? kTRUE : kFALSE; }
+ Bool_t IsShared() const { return IsClusterShared(); }
+ Bool_t IsUsed() const { return IsClusterUsed(); }
+ Bool_t IsFivePad() const { return TestBit(kFivePad); }
+ inline Bool_t IsRPhiMethod(ETRDclusterStatus m) const;
+
+ UChar_t GetPadMaskedPosition() const { return fClusterMasking & 7; }
+ UChar_t GetPadMaskedStatus() const { return fClusterMasking >> 3; }
+ Int_t GetDetector() const { return fDetector; }
+ Int_t GetLocalTimeBin() const { return fLocalTimeBin; }
+ Float_t GetQ() const { return fQ; }
+ Int_t GetNPads() const { return fNPads; }
+ Float_t GetCenter() const { return fCenter; }
+ Int_t GetPadCol() const { return fPadCol; }
+ Int_t GetPadRow() const { return fPadRow; }
+ Int_t GetPadTime() const { return fPadTime; }
+ Short_t *GetSignals() { return fSignals; }
+ Float_t GetSumS() const;
+
+ static Double_t GetSX(Int_t tb, Double_t z=-1);
+ static Double_t GetSYdrift(Int_t tb, Int_t ly=0, Double_t z=-1);
+ static Double_t GetSYcharge(Float_t q);
+ static Double_t GetSYprf(Int_t ly, Double_t center, Double_t s2);
+ static Double_t GetXcorr(Int_t tb, Double_t z=-1);
+ static Double_t GetYcorr(Int_t ly, Float_t y);
+ Float_t GetXloc(Double_t t0, Double_t vd
+ , const Double_t *const q = 0x0
+ , const Double_t *const xq = 0x0
+ , Double_t z = 0.2);
+ Float_t GetYloc(Double_t y0, Double_t s2, Double_t W, Double_t *const y1=0x0, Double_t *const y2=0x0);
+
+ void Print(Option_t* o="") const;
+
+ void SetLocalTimeBin(Char_t t) { fLocalTimeBin = t; }
+ void SetNPads(Int_t n) { fNPads = n; }
+ void SetPadCol(UChar_t inPadCol) { fPadCol = inPadCol; }
+ void SetPadRow(UChar_t inPadRow) { fPadRow = inPadRow; }
+ void SetPadTime(UChar_t inPadTime) { fPadTime = inPadTime; }
+ void SetDetector(Short_t inDetector) { fDetector = inDetector; }
+ void SetQ(Float_t inQ) { fQ = inQ; }
+ void SetClusterMasking(UChar_t inClusterMasking) { fClusterMasking = inClusterMasking; }
+ void SetShared(Bool_t sh = kTRUE) { SetBit(AliCluster::kShared,sh); }
+ void SetFivePad(Bool_t b = kTRUE) { SetBit(kFivePad,b); }
+ void SetInChamber(Bool_t in = kTRUE) { SetBit(kInChamber,in); }
+ void SetPadMaskedPosition(UChar_t position);
+ void SetPadMaskedStatus(UChar_t status);
+ void SetSigmaY2(Float_t s2, Float_t dt, Float_t exb, Float_t x0, Float_t z=-1., Float_t tgp=0.);
inline void SetRPhiMethod(ETRDclusterStatus m);
- void SetDetector(Short_t inDetector){ fDetector = inDetector;}
- void SetQ(Float_t inQ){ fQ = inQ;}
- void SetClusterMasking(UChar_t inClusterMasking){ fClusterMasking = inClusterMasking;}
- void SetShared(Bool_t sh = kTRUE) { SetBit(AliCluster::kShared,sh); }
- void SetSigmaY2(Float_t s2, Float_t dt, Float_t exb, Float_t x0, Float_t z=-1., Float_t tgp=0.);
- void Use(Int_t u = 1) { SetBit(AliCluster::kUsed, u ? kTRUE : kFALSE); }
- void SetFivePad(Bool_t b = kTRUE) { SetBit(kFivePad,b);}
+
+ void Use(Int_t u = 1) { SetBit(AliCluster::kUsed, u ? kTRUE : kFALSE); }
protected:
+
UChar_t fPadCol; // Central pad number in column direction
UChar_t fPadRow; // Central pad number in row direction
UChar_t fPadTime; // Uncalibrated time bin number
Float_t fCenter; // Center of the cluster relative to the pad
private:
- Float_t GetDYcog(Double_t *const y1=0x0, Double_t *const y2=0x0);
- Float_t GetDYlut(Double_t *const y1=0x0, Double_t *const y2=0x0);
- Float_t GetDYgauss(Double_t sw, Double_t *const y1=0x0, Double_t *const y2=0x0);
+
+ Float_t GetDYcog(const Double_t *const y1=0x0, const Double_t *const y2=0x0);
+ Float_t GetDYlut(const Double_t *const y1=0x0, const Double_t *const y2=0x0);
+ Float_t GetDYgauss(Double_t sw, Double_t *const y1=0x0, Double_t *const y2=0x0);
static void FillLUT();
static const Int_t fgkNlut; //! Number of bins of the LUT
static Double_t *fgLUT; //! The lookup table
- ClassDef(AliTRDcluster, 7) // Cluster for the TRD
+ ClassDef(AliTRDcluster, 7) // Cluster for the TRD
+
};
//________________________________________________
git://git.uio.no / u / mrichter / AliRoot.git / commitdiff