/*
$Log$
+Revision 1.2 2000/10/07 10:58:15 barbera
+Mother volume ITSV corrected
+
Revision 1.1 2000/10/06 23:09:24 barbera
New coarse geometry (asymmetric services
// invisible
gMC->Gspos("ITSV", 1, "ALIC", 0., 0., 0., 0, "ONLY");
- //gMC->Gsatt("ITSV", "SEEN", 0);
+ gMC->Gsatt("ITSV", "SEEN", 0);
// --- Define ghost volume containing the six layers and fill it with air
// invisible
gMC->Gspos("ITSD", 1, "ITSV", 0., 0., 0., 0, "ONLY");
- //gMC->Gsatt("ITSD", "SEEN", 0);
+ gMC->Gsatt("ITSD", "SEEN", 0);
// ITS LAYERS (SILICON)
gMC->Gsvolu("ITS6", "TUBE", idtmed[249], dits, 3);
gMC->Gspos("ITS6", 1, "ITSD", 0., 0., 0., 0, "ONLY");
- // END-LADDER ELECTRONICS BOXES AND CABLES
+ // END-LADDER ELECTRONICS BOXES AND CABLES FOR SPD
- gMC->Gsvolu("IELE", "TUBE", idtmed[233], dits, 0); // check the medium !!
- for (i = 0; i < 6; i++) {
+ gMC->Gsvolu("IEL1", "TUBE", idtmed[208], dits, 0);
+ for (i = 0; i < 2; i++) {
dits[0] = rl[i];
dits[1] = dits[0] + drb[i];
dits[2] = dzb[i] / 2.;
zpos = dzl[i] + dits[2];
- gMC->Gsposp("IELE", i+1, "ITSD", 0., 0., zpos, 0, "ONLY", dits, 3);
- gMC->Gsposp("IELE", i+1+6, "ITSD", 0., 0.,-zpos, 0, "ONLY", dits, 3);
+ gMC->Gsposp("IEL1", i+1, "ITSD", 0., 0., zpos, 0, "ONLY", dits, 3);
+ gMC->Gsposp("IEL1", i+1+6, "ITSD", 0., 0.,-zpos, 0, "ONLY", dits, 3);
}
+
+ // END-LADDER ELECTRONICS BOXES AND CABLES FOR SDD
+
+ gMC->Gsvolu("IEL2", "TUBE", idtmed[237], dits, 0);
+ for (i = 2; i < 4; i++) {
+ dits[0] = rl[i];
+ dits[1] = dits[0] + drb[i];
+ dits[2] = dzb[i] / 2.;
+ zpos = dzl[i] + dits[2];
+ gMC->Gsposp("IEL2", i+1, "ITSD", 0., 0., zpos, 0, "ONLY", dits, 3);
+ gMC->Gsposp("IEL2", i+1+6, "ITSD", 0., 0.,-zpos, 0, "ONLY", dits, 3);
+ }
+
+ // END-LADDER ELECTRONICS BOXES AND CABLES FOR SSD
+
+ gMC->Gsvolu("IEL3", "TUBE", idtmed[263], dits, 0);
+ for (i = 4; i < 6; i++) {
+ dits[0] = rl[i];
+ dits[1] = dits[0] + drb[i];
+ dits[2] = dzb[i] / 2.;
+ zpos = dzl[i] + dits[2];
+ gMC->Gsposp("IEL3", i+1, "ITSD", 0., 0., zpos, 0, "ONLY", dits, 3);
+ gMC->Gsposp("IEL3", i+1+6, "ITSD", 0., 0.,-zpos, 0, "ONLY", dits, 3);
+ }
-
// DEFINE END CONES FOR SPD
pcits[0] = 0.;
pcits[6] = 39.4;
pcits[7] = 10.065;
pcits[8] = 10.065+2.; // check thickness !!
- gMC->Gsvolu("ICO1", "PCON", idtmed[275], pcits, 9); // check the medium !!
+ gMC->Gsvolu("ICO1", "PCON", idtmed[209], pcits, 9);
AliMatrix(idrotm[200], 90., 0., 90., 90., 180., 0.);
gMC->Gspos("ICO1", 1, "ITSD", 0., 0., 0., 0, "ONLY");
gMC->Gspos("ICO1", 2, "ITSD", 0., 0., 0., idrotm[200], "ONLY");
pcits[6] = 57.4;
pcits[7] = 28.;
pcits[8] = 28.+3.0; // check thickness !!
- gMC->Gsvolu("ICO2", "PCON", idtmed[275], pcits, 9); // check the medium !!
+ gMC->Gsvolu("ICO2", "PCON", idtmed[238], pcits, 9);
gMC->Gspos("ICO2", 1, "ITSD", 0., 0., 0., 0, "ONLY");
gMC->Gspos("ICO2", 2, "ITSD", 0., 0., 0., idrotm[200], "ONLY");
pcits[6] = 74.0;
pcits[7] = 47.;
pcits[8] = 47.+4.0; // check thickness !!
- gMC->Gsvolu("ICO3", "PCON", idtmed[275], pcits, 9); // check the medium !!
+ gMC->Gsvolu("ICO3", "PCON", idtmed[264], pcits, 9);
gMC->Gspos("ICO3", 1, "ITSD", 0., 0., 0., 0, "ONLY");
gMC->Gspos("ICO3", 2, "ITSD", 0., 0., 0., idrotm[200], "ONLY");
dgh[1] = 56.;
dgh[2] = 9.75;
- gMC->Gsvolu("ICA1", "TUBE", idtmed[275], dgh, 3); // check medium !!!
+ gMC->Gsvolu("ICA1", "TUBE", idtmed[281], dgh, 3);
gMC->Gspos("ICA1", 1, "ITSV", 0., 0., 86.45, 0, "ONLY");
gMC->Gspos("ICA1", 2, "ITSV", 0., 0., -86.45, idrotm[200], "ONLY");
dgh[1] = 56.;
dgh[2] = 2.25;
- gMC->Gsvolu("IPAN", "TUBE", idtmed[275], dgh, 3); // check medium !!!
+ gMC->Gsvolu("IPAN", "TUBE", idtmed[282], dgh, 3);
gMC->Gspos("IPAN", 1, "ITSV", 0., 0., 98.45, 0, "ONLY");
gMC->Gspos("IPAN", 2, "ITSV", 0., 0., -98.45, idrotm[200], "ONLY");
- // --- Define cables/cooling on the absorber side
+ // --- Define cables/cooling below the TPC on the absorber side
dgh[0] = 0.;
dgh[1] = 360.;
dgh[6] = xltpc;
dgh[7] = 61.8;
dgh[8] = 65.8; // same cross section
- gMC->Gsvolu("ICC1", "PCON", idtmed[275], dgh, 9); // check medium !!!
+ gMC->Gsvolu("ICC1", "PCON", idtmed[283], dgh, 9);
gMC->Gspos("ICC1", 1, "ITSV", 0., 0., 0., 0, "ONLY");
// --- Define cables/cooling behind the TPC on the absorber side
dgh[6] = xltpc+4.;
dgh[7] = 62.5;
dgh[8] = 74.5;
- gMC->Gsvolu("ICC2", "PCON", idtmed[275], dgh, 9); // check medium !!!
+ gMC->Gsvolu("ICC2", "PCON", idtmed[283], dgh, 9);
gMC->Gspos("ICC2", 1, "ITSV", 0., 0., 0., 0, "ONLY");
- // --- Define cables/cooling on the other side w.r.t. the absorber
+ // --- Define cables/cooling below the TPC on the other side w.r.t.
+ // the absorber
dgh[0] = 45.;
dgh[1] = 49.;
dgh[2] = (xltpc-100.7)/2.;
- gMC->Gsvolu("ICC3", "TUBE", idtmed[275], dgh, 3); // check medium !!!
+ gMC->Gsvolu("ICC3", "TUBE", idtmed[283], dgh, 3);
gMC->Gspos("ICC3", 1, "ITSV", 0., 0., -100.7-dgh[2], 0, "ONLY");
dgh[6] = -xltpc-2.3;
dgh[7] = 45.;
dgh[8] = 74.5;
- gMC->Gsvolu("ICC4", "PCON", idtmed[275], dgh, 9); // check medium !!!
+ gMC->Gsvolu("ICC4", "PCON", idtmed[283], dgh, 9);
gMC->Gspos("ICC4", 1, "ITSV", 0., 0., 0., 0, "ONLY");
- // --- Define hook for the TPC on other side w.r.t. the absorber
+ // --- Define hook to the TPC on other side w.r.t. the absorber
dgh[0] = 74.5;
dgh[1] = 79.5;
dgh[2] = 2.5;
- gMC->Gsvolu("IHOK", "TUBE", idtmed[275], dgh, 3); // check medium !!!
+ gMC->Gsvolu("IHOK", "TUBE", idtmed[284], dgh, 3);
gMC->Gspos("IHOK", 1, "ITSV", 0., 0., -xltpc-dgh[2], 0, "ONLY");
Float_t apoly[2] = { 12.01,1. };
Float_t zpoly[2] = { 6.,1. };
Float_t wpoly[2] = { .33,.67 };
- // SERVICES
+ // old SERVICES
Float_t zserv[4] = { 1.,6.,26.,29. };
Float_t aserv[4] = { 1.,12.,55.8,63.5 };
Float_t wserv[4] = { .014,.086,.42,.48 };
+ // Stainless steel
+ Float_t asteel[4] = { 55.847,51.9961,58.6934,28.0855 };
+ Float_t zsteel[4] = { 26.,24.,28.,14. };
+ Float_t wsteel[4] = { .715,.18,.1,.005 };
+
Int_t isxfld = gAlice->Field()->Integ();
Float_t sxmgmx = gAlice->Field()->Max();
AliMaterial(6, "SPD Al$", 26.981539, 13., 2.6989, 8.9, 999);
AliMixture( 7, "SPD Water $", awat, zwat, denswat, -2, wwat);
AliMixture( 8, "SPD Freon$", afre, zfre, densfre, -2, wfre);
+ AliMaterial(9, "SPD End ladder$",28.0855, 14., 2.33, 9.36, 999); // check !!!!
+ AliMaterial(10, "SPD cone$",28.0855, 14., 2.33, 9.36, 999); // check !!!!
// **
- AliMedium(0, "SPD Si$", 0, 1,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(1, "SPD Si chip$", 1, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(2, "SPD Si bus$", 2, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(3, "SPD C$", 3, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(4, "SPD Air$", 4, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(5, "SPD Vacuum$", 5, 0,isxfld,sxmgmx, 10.,1.00, .1, .100,10.00);
- AliMedium(6, "SPD Al$", 6, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(7, "SPD Water $", 7, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(8, "SPD Freon$", 8, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(0, "SPD Si$", 0, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(1, "SPD Si chip$", 1, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(2, "SPD Si bus$", 2, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(3, "SPD C$", 3, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(4, "SPD Air$", 4, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(5, "SPD Vacuum$", 5, 0,isxfld,sxmgmx, 10.,1.00, .1, .100,10.00);
+ AliMedium(6, "SPD Al$", 6, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(7, "SPD Water $", 7, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(8, "SPD Freon$", 8, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(9, "SPD End ladder",9, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(10, "SPD cone$", 10, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
// 225-249 --> Silicon Drift Detectors (detectors, chips, buses, cooling,..)
AliMaterial(35, "SDD Copper$", 63.546, 29., 8.96, 1.43, 999);
AliMixture( 36, "SDD Ceramics$", acer, zcer, denscer, -5, wcer);
AliMaterial(37, "SDD Kapton$", 12.011, 6., 1.3, 31.27, 999);
+ AliMaterial(38, "SDD End ladder$",28.0855, 14., 2.33, 9.36, 999); // check !!!!
+ AliMaterial(39, "SDD cone$",28.0855, 14., 2.33, 9.36, 999); // check !!!!
// **
// check A and Z
- AliMedium(25, "SDD Si$", 25, 1,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(25, "SDD Si$", 25, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
AliMedium(26, "SDD Si chip$", 26, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
AliMedium(27, "SDD Si bus$", 27, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
AliMedium(28, "SDD C$", 28, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
AliMedium(35, "SDD Copper$", 35, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
AliMedium(36, "SDD Ceramics$",36, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
AliMedium(37, "SDD Kapton$", 37, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(38, "SDD End ladder",38, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(39, "SDD cone$", 39, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
// 250-274 --> Silicon Strip Detectors (detectors, chips, buses, cooling,..)
AliMixture( 61, "SSD Ceramics$", acer, zcer, denscer, 5, wcer);
AliMaterial(62, "SSD Kapton$", 12.011, 6., 1.3, 31.27, 999.);
// check A and Z
- AliMaterial(63, "SDD G10FR4$", 17.749, 8.875, 1.8, 21.822, 999.);
+ AliMaterial(63, "SSD G10FR4$", 17.749, 8.875, 1.8, 21.822, 999.);
+ AliMaterial(64, "SSD End ladder$",28.0855, 14., 2.33, 9.36, 999); // check !!!!
+ AliMaterial(65, "SSD cone$",28.0855, 14., 2.33, 9.36, 999); // check !!!!
// **
- AliMedium(50, "SSD Si$", 50, 1,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(50, "SSD Si$", 50, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
AliMedium(51, "SSD Si chip$", 51, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
AliMedium(52, "SSD Si bus$", 52, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
AliMedium(53, "SSD C$", 53, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
AliMedium(61, "SSD Ceramics$",61, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
AliMedium(62, "SSD Kapton$", 62, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
AliMedium(63, "SSD G10FR4$", 63, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(64, "SPD End ladder",64, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(65, "SPD cone$", 65, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
// 275-299 --> General (end-caps, frames, cooling, cables, etc.)
// calls with the same array must specify the number of elements as
// positive
AliMixture(81, "GEN Water $", awat, zwat, denswat, 2, wwat);
+ AliMaterial(82, "GEN Cables$", 12.011, 6., 2.265, 18.8, 999.); // check !!!
+ AliMaterial(83, "GEN patch pan$", 12.011, 6., 2.265, 18.8, 999.); // check !!!
+ AliMaterial(84, "GEN serv$", 12.011, 6., 2.265, 18.8, 999.); // check !!!
+ AliMixture(85, "GEN Inox$", asteel, zsteel, 7.88, 4, wsteel);
// **
AliMedium(75,"GEN C$", 75, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
AliMedium(76,"GEN Air$", 76, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
AliMedium(79,"GEN SERVICES$", 79, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
AliMedium(80,"GEN Copper$", 80, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
AliMedium(81,"GEN Water $", 81, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(82,"GEN Cables$", 82, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(83,"GEN patch pan$",83, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(84,"GEN serv$", 84, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(85,"GEN Inox$", 85, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
}
//_____________________________________________________________________________
void AliITSvPPRcoarseasymm::Init(){
/*
$Log$
+Revision 1.2 2000/10/07 10:42:43 barbera
+Mother volume ITSV corrected
+
Revision 1.1 2000/10/06 23:09:12 barbera
New coarse geometry (symmetric services
gMC->Gsvolu("ITS6", "TUBE", idtmed[249], dits, 3);
gMC->Gspos("ITS6", 1, "ITSD", 0., 0., 0., 0, "ONLY");
- // END-LADDER ELECTRONICS BOXES AND CABLES
+ // END-LADDER ELECTRONICS BOXES AND CABLES FOR SPD
- gMC->Gsvolu("IELE", "TUBE", idtmed[233], dits, 0); // check the medium !!
- for (i = 0; i < 6; i++) {
+ gMC->Gsvolu("IEL1", "TUBE", idtmed[208], dits, 0);
+ for (i = 0; i < 2; i++) {
dits[0] = rl[i];
dits[1] = dits[0] + drb[i];
dits[2] = dzb[i] / 2.;
zpos = dzl[i] + dits[2];
- gMC->Gsposp("IELE", i+1, "ITSD", 0., 0., zpos, 0, "ONLY", dits, 3);
- gMC->Gsposp("IELE", i+1+6, "ITSD", 0., 0.,-zpos, 0, "ONLY", dits, 3);
+ gMC->Gsposp("IEL1", i+1, "ITSD", 0., 0., zpos, 0, "ONLY", dits, 3);
+ gMC->Gsposp("IEL1", i+1+6, "ITSD", 0., 0.,-zpos, 0, "ONLY", dits, 3);
}
+
+ // END-LADDER ELECTRONICS BOXES AND CABLES FOR SDD
+
+ gMC->Gsvolu("IEL2", "TUBE", idtmed[237], dits, 0);
+ for (i = 2; i < 4; i++) {
+ dits[0] = rl[i];
+ dits[1] = dits[0] + drb[i];
+ dits[2] = dzb[i] / 2.;
+ zpos = dzl[i] + dits[2];
+ gMC->Gsposp("IEL2", i+1, "ITSD", 0., 0., zpos, 0, "ONLY", dits, 3);
+ gMC->Gsposp("IEL2", i+1+6, "ITSD", 0., 0.,-zpos, 0, "ONLY", dits, 3);
+ }
+
+ // END-LADDER ELECTRONICS BOXES AND CABLES FOR SSD
+
+ gMC->Gsvolu("IEL3", "TUBE", idtmed[263], dits, 0);
+ for (i = 4; i < 6; i++) {
+ dits[0] = rl[i];
+ dits[1] = dits[0] + drb[i];
+ dits[2] = dzb[i] / 2.;
+ zpos = dzl[i] + dits[2];
+ gMC->Gsposp("IEL3", i+1, "ITSD", 0., 0., zpos, 0, "ONLY", dits, 3);
+ gMC->Gsposp("IEL3", i+1+6, "ITSD", 0., 0.,-zpos, 0, "ONLY", dits, 3);
+ }
-
// DEFINE END CONES FOR SPD
pcits[0] = 0.;
pcits[6] = 39.4;
pcits[7] = 10.065;
pcits[8] = 10.065+2.; // check thickness !!
- gMC->Gsvolu("ICO1", "PCON", idtmed[275], pcits, 9); // check the medium !!
+ gMC->Gsvolu("ICO1", "PCON", idtmed[209], pcits, 9);
AliMatrix(idrotm[200], 90., 0., 90., 90., 180., 0.);
gMC->Gspos("ICO1", 1, "ITSD", 0., 0., 0., 0, "ONLY");
gMC->Gspos("ICO1", 2, "ITSD", 0., 0., 0., idrotm[200], "ONLY");
pcits[6] = 57.4;
pcits[7] = 28.;
pcits[8] = 28.+3.0; // check thickness !!
- gMC->Gsvolu("ICO2", "PCON", idtmed[275], pcits, 9); // check the medium !!
+ gMC->Gsvolu("ICO2", "PCON", idtmed[238], pcits, 9);
gMC->Gspos("ICO2", 1, "ITSD", 0., 0., 0., 0, "ONLY");
gMC->Gspos("ICO2", 2, "ITSD", 0., 0., 0., idrotm[200], "ONLY");
pcits[6] = 74.0;
pcits[7] = 47.;
pcits[8] = 47.+4.0; // check thickness !!
- gMC->Gsvolu("ICO3", "PCON", idtmed[275], pcits, 9); // check the medium !!
+ gMC->Gsvolu("ICO3", "PCON", idtmed[264], pcits, 9);
gMC->Gspos("ICO3", 1, "ITSD", 0., 0., 0., 0, "ONLY");
gMC->Gspos("ICO3", 2, "ITSD", 0., 0., 0., idrotm[200], "ONLY");
dgh[1] = 56.;
dgh[2] = 9.75;
- gMC->Gsvolu("ICA1", "TUBE", idtmed[275], dgh, 3); // check medium !!!
+ gMC->Gsvolu("ICA1", "TUBE", idtmed[281], dgh, 3);
gMC->Gspos("ICA1", 1, "ITSV", 0., 0., 86.45, 0, "ONLY");
gMC->Gspos("ICA1", 2, "ITSV", 0., 0., -86.45, idrotm[200], "ONLY");
dgh[1] = 56.;
dgh[2] = 2.25;
- gMC->Gsvolu("IPAN", "TUBE", idtmed[275], dgh, 3); // check medium !!!
+ gMC->Gsvolu("IPAN", "TUBE", idtmed[282], dgh, 3); // check medium !!!
gMC->Gspos("IPAN", 1, "ITSV", 0., 0., 98.45, 0, "ONLY");
gMC->Gspos("IPAN", 2, "ITSV", 0., 0., -98.45, idrotm[200], "ONLY");
- // --- Define cables/cooling
+ // --- Define cables/cooling below the TPC
dgh[0] = 0.;
dgh[1] = 360.;
dgh[6] = xltpc;
dgh[7] = 61.8;
dgh[8] = 65.8; // same cross section
- gMC->Gsvolu("ICC1", "PCON", idtmed[275], dgh, 9); // check medium !!!
+ gMC->Gsvolu("ICC1", "PCON", idtmed[283], dgh, 9);
gMC->Gspos("ICC1", 1, "ITSV", 0., 0., 0., 0, "ONLY");
gMC->Gspos("ICC1", 2, "ITSV", 0., 0., 0., idrotm[200], "ONLY");
dgh[6] = xltpc+4.;
dgh[7] = 62.5;
dgh[8] = 74.5;
- gMC->Gsvolu("ICC2", "PCON", idtmed[275], dgh, 9); // check medium !!!
+ gMC->Gsvolu("ICC2", "PCON", idtmed[283], dgh, 9);
gMC->Gspos("ICC2", 1, "ITSV", 0., 0., 0., 0, "ONLY");
gMC->Gspos("ICC2", 2, "ITSV", 0., 0., 0., idrotm[200], "ONLY");
- // --- Define hook for the TPC on other side w.r.t. the absorber
+ // --- Define hook to the TPC on other side w.r.t. the absorber
dgh[0] = 74.5;
dgh[1] = 79.5;
dgh[2] = 2.5;
- gMC->Gsvolu("IHOK", "TUBE", idtmed[275], dgh, 3); // check medium !!!
+ gMC->Gsvolu("IHOK", "TUBE", idtmed[284], dgh, 3);
gMC->Gspos("IHOK", 1, "ITSV", 0., 0., -xltpc-dgh[2], 0, "ONLY");
Float_t apoly[2] = { 12.01,1. };
Float_t zpoly[2] = { 6.,1. };
Float_t wpoly[2] = { .33,.67 };
- // SERVICES
+ // old SERVICES
Float_t zserv[4] = { 1.,6.,26.,29. };
Float_t aserv[4] = { 1.,12.,55.8,63.5 };
Float_t wserv[4] = { .014,.086,.42,.48 };
+ // Stainless steel
+ Float_t asteel[4] = { 55.847,51.9961,58.6934,28.0855 };
+ Float_t zsteel[4] = { 26.,24.,28.,14. };
+ Float_t wsteel[4] = { .715,.18,.1,.005 };
+
Int_t isxfld = gAlice->Field()->Integ();
Float_t sxmgmx = gAlice->Field()->Max();
AliMaterial(6, "SPD Al$", 26.981539, 13., 2.6989, 8.9, 999);
AliMixture( 7, "SPD Water $", awat, zwat, denswat, -2, wwat);
AliMixture( 8, "SPD Freon$", afre, zfre, densfre, -2, wfre);
+ AliMaterial(9, "SPD End ladder$",28.0855, 14., 2.33, 9.36, 999); // check !!!!
+ AliMaterial(10, "SPD cone$",28.0855, 14., 2.33, 9.36, 999); // check !!!!
// **
- AliMedium(0, "SPD Si$", 0, 1,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(1, "SPD Si chip$", 1, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(2, "SPD Si bus$", 2, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(3, "SPD C$", 3, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(4, "SPD Air$", 4, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(5, "SPD Vacuum$", 5, 0,isxfld,sxmgmx, 10.,1.00, .1, .100,10.00);
- AliMedium(6, "SPD Al$", 6, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(7, "SPD Water $", 7, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
- AliMedium(8, "SPD Freon$", 8, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(0, "SPD Si$", 0, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(1, "SPD Si chip$", 1, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(2, "SPD Si bus$", 2, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(3, "SPD C$", 3, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(4, "SPD Air$", 4, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(5, "SPD Vacuum$", 5, 0,isxfld,sxmgmx, 10.,1.00, .1, .100,10.00);
+ AliMedium(6, "SPD Al$", 6, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(7, "SPD Water $", 7, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(8, "SPD Freon$", 8, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(9, "SPD End ladder",9, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(10, "SPD cone$", 10, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
// 225-249 --> Silicon Drift Detectors (detectors, chips, buses, cooling,..)
AliMaterial(35, "SDD Copper$", 63.546, 29., 8.96, 1.43, 999);
AliMixture( 36, "SDD Ceramics$", acer, zcer, denscer, -5, wcer);
AliMaterial(37, "SDD Kapton$", 12.011, 6., 1.3, 31.27, 999);
+ AliMaterial(38, "SDD End ladder$",28.0855, 14., 2.33, 9.36, 999); // check !!!!
+ AliMaterial(39, "SDD cone$",28.0855, 14., 2.33, 9.36, 999); // check !!!!
// **
// check A and Z
- AliMedium(25, "SDD Si$", 25, 1,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(25, "SDD Si$", 25, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
AliMedium(26, "SDD Si chip$", 26, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
AliMedium(27, "SDD Si bus$", 27, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
AliMedium(28, "SDD C$", 28, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
AliMedium(35, "SDD Copper$", 35, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
AliMedium(36, "SDD Ceramics$",36, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
AliMedium(37, "SDD Kapton$", 37, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(38, "SDD End ladder",38, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(39, "SDD cone$", 39, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
// 250-274 --> Silicon Strip Detectors (detectors, chips, buses, cooling,..)
AliMixture( 61, "SSD Ceramics$", acer, zcer, denscer, 5, wcer);
AliMaterial(62, "SSD Kapton$", 12.011, 6., 1.3, 31.27, 999.);
// check A and Z
- AliMaterial(63, "SDD G10FR4$", 17.749, 8.875, 1.8, 21.822, 999.);
+ AliMaterial(63, "SSD G10FR4$", 17.749, 8.875, 1.8, 21.822, 999.);
+ AliMaterial(64, "SSD End ladder$",28.0855, 14., 2.33, 9.36, 999); // check !!!!
+ AliMaterial(65, "SSD cone$",28.0855, 14., 2.33, 9.36, 999); // check !!!!
// **
- AliMedium(50, "SSD Si$", 50, 1,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(50, "SSD Si$", 50, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
AliMedium(51, "SSD Si chip$", 51, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
AliMedium(52, "SSD Si bus$", 52, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
AliMedium(53, "SSD C$", 53, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
AliMedium(61, "SSD Ceramics$",61, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
AliMedium(62, "SSD Kapton$", 62, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
AliMedium(63, "SSD G10FR4$", 63, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(64, "SPD End ladder",64, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(65, "SPD cone$", 65, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
// 275-299 --> General (end-caps, frames, cooling, cables, etc.)
// calls with the same array must specify the number of elements as
// positive
AliMixture(81, "GEN Water $", awat, zwat, denswat, 2, wwat);
+ AliMaterial(82, "GEN Cables$", 12.011, 6., 2.265, 18.8, 999.); // check !!!
+ AliMaterial(83, "GEN patch pan$", 12.011, 6., 2.265, 18.8, 999.); // check !!!
+ AliMaterial(84, "GEN serv$", 12.011, 6., 2.265, 18.8, 999.); // check !!!
+ AliMixture(85, "GEN Inox$", asteel, zsteel, 7.88, 4, wsteel);
// **
AliMedium(75,"GEN C$", 75, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
AliMedium(76,"GEN Air$", 76, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
AliMedium(79,"GEN SERVICES$", 79, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
AliMedium(80,"GEN Copper$", 80, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
AliMedium(81,"GEN Water $", 81, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(82,"GEN Cables$", 82, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(83,"GEN patch pan$",83, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(84,"GEN serv$", 84, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
+ AliMedium(85,"GEN Inox$", 85, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003);
}
//_____________________________________________________________________________
void AliITSvPPRcoarsesymm::Init(){