AliTRDPreprocessor.cxx : change of number of LDC for the TRD
AliTRDCalibraFit.cxx: change of mean value t0 for not enough statistics
TRDVDRIFTda.cxx TRDPEDESTALda.cxx: security for baseline subtraction
Enlarged cut on cluster matching in AliITSVertexerCosmics. Needed to improve efficiency of vertex reconstruction for cosmic events collected with B-on (A. Dainese)
added CheckActiveChannels.C macro used to check active channels as declared in TOF OCDB entries. it fills histograms with channel status corresponding to specified run number and save on file
Applying the proper fix to cope with setups with multiple trigger clusters.
Since the fancy AliHLTReadoutList operator functions did not work on the
HLT cluster (reason still unknown), explicite functions are now added and
used. The readout list specified in the configuration of the HLTGlobalTrigger
is now masked with the readout list from the CTP classes. The quick fix
just used the readout list from the CTP classes, however, HLT bits have
not been set there.
from A.Maire (Antonin.Maire@ires.in2p3.fr)
1. d2N/dptdy analysis.
Further PID developments : TH3F (Eff Mass, Pt, Y) with PID info :
- No PID,
- Single PID (proton for Xis / kaon for Omegas)
- Double PID (p+K for Omegas)
2. Azimuthal correlation study.
2.1 Change in Delta(phi) axis from [-180;180] to [-50;310]
2.2 Improvement : retain only cascades that are leading-particles, event by event
2 bugfixes:
- run info was cleared to early at the EOR event and the run number was not available in the component processing at EOR
- event craetion time stamp appears not to be set from the PubSub, setting to UTC in that case to have a valid timestamp for the ESD
introducing functions in addition some of the operator functions since the operator functions
did not behave well on the HLT cluster. Basically the operator &= and |= were not entered when using
to AliHLTReadoutList objects in the HLTGlobalTrigger to mask the readout according to the CTP classes
adding helper function to get active trigger mask from CTPData
marian [Tue, 8 Sep 2009 16:55:14 +0000 (16:55 +0000)]
AliTPCcalibDB.cxx.diff Use DCS graph for HighVoltage information whenever available to prevent from Spline fit problems, remove obsolete code
AliTPCcalibDB.cxx.h remove obsolete code, parts move to util class
AliTPCcalibDButil.cxx New class to calculate derived values from calibration entries
AliTPCcalibDButil.h New class to calculate derived values from calibration entries
AliTPCCalibViewerGUItime.cxx.diff Reset pointer was missing
AliTPCCalibViewerGUItime.h.diff set private in proper place
CalibEnv.C.diff use AliTPCcalibDButil now for derived values
libTPCbase.pkg.diff Add AliTPCcalibDButil
MapCalibrationObjects.root Include Number of pads per row mapping
TPCbaseLinkDef.h.diff Add AliTPCcalibDButil
Fixing problem for cross tracks
A or C side detemined from clusters
Don't use calculation of dz for minimal distance
At the end real problem - skip CE tracks
small improvement on class AliTOFcalibHisto, which adds further external flexibility to online/offline calibration. the new feature is used by AliTOFPreprocessor
At the start of the online GUI sterring window we will read the list of already active physics runs from the DAQ logbook. Once started the runs appear and disappear using the DIM service mechanism.
- replaced TPC ESD converter with the global one to have access to the time stamp information
- arranged the libraries that need to be loaded accordingly
Adding interruption handler to the DATE online raw-data reader. Will be used by the online display/reco steering process in order to stop processing of raw data in case and SOR DIM was received and there were no EOR events in the data stream.
Updates in the PHOS/EMCAL raw-data reading code due to the new mapping is PHOS (Yuri). Can't really verify all the changes, but they were tested for PHOS and Gustavo accepted them for EMCAL.
Adding TOF visualization for online display (raw data + clusters). The macros work perfectly well except one simple fix in the clusters (unloading was needed).
new option introduced to ignore the HLTOUT data blocks of the HLT raw data
option 'ignore-hltout' can be set as additional option for the HLT with
AliReconstruction::SetOption, or AliHLTReconstructor::Init respectively
This is in particular useful for HLT chains running on raw data during
AliReconstruction. The output of such chains is added to the HLTOUT collection
and might so interfere with the data produced in the online system and
present in the raw data.
initializing the trigger data structure correctly before component data processing
this was not necessary in AliHLTSystem until now since no component was using the
trigger information so far. Trigger components acces the structure to get information
about CTP trigger classes. The CTP information is not filled yet though, this will be
done in accordance to the trigger framework currently developed for AliSimulation.
filling the event creation time in the EventData struct before invoking component data processing
required to set the ESD timestamp also when running in AliSimulation/Reconstruction
New method to clone current raw-data event and create a single-event raw-reader. Will be used in online display/reco. Not implemented for AliRawReaderFile and AliRawReaderMemory.
cleaning up AliHLTRunStatistics class to be used as a container for run statistics information
copy contructor and assignment operator implemented, TObject::Print, Clone and Clear implemented
1. bug fix: skip the final transport of tracks to the inner TPC X, when the tracks are horisontal
2. few tuning parameters are added
3. compilation warnings fixed
Extra parameters added
--Thi line, and those below, will be ignored--
M HLT/TPCLib/tracking-ca/AliHLTTPCCAStandaloneFramework.cxx
M HLT/TPCLib/tracking-ca/AliHLTTPCCAGlobalMergerComponent.h
M HLT/TPCLib/tracking-ca/AliHLTTPCCATrackerComponent.cxx
M HLT/TPCLib/tracking-ca/AliHLTTPCCAMerger.cxx
M HLT/TPCLib/tracking-ca/AliTPCtrackerCA.cxx
M HLT/TPCLib/tracking-ca/AliHLTTPCCAParam.h
M HLT/TPCLib/tracking-ca/AliHLTTPCCASliceData.cxx
M HLT/TPCLib/tracking-ca/AliHLTTPCCATracker.cxx
M HLT/TPCLib/tracking-ca/AliHLTTPCCADisplay.cxx
M HLT/TPCLib/tracking-ca/AliHLTTPCCAMerger.h
M HLT/TPCLib/tracking-ca/AliHLTTPCCADisplay.h
M HLT/TPCLib/tracking-ca/AliHLTTPCCANeighboursFinder.cxx
M HLT/TPCLib/tracking-ca/AliHLTTPCCAParam.cxx
M HLT/TPCLib/tracking-ca/AliHLTTPCCAGlobalMergerComponent.cxx
M HLT/TPCLib/tracking-ca/AliHLTTPCCATrackerComponent.h
adding AliHLTComponent base class methods to access event properties orbit,
period, bc, and timestamp
GlobalESDConverter initializes ESD header from the event properties
* AliHLTHOMERBlockDesc holds now a copy of the data
* Introduced a buffer to save the last $BUFFERSIZE events
* Added navigation throught the buffer
* Updated the HLT logo
New method to resolve the TRefs and clone the raw-data itself. Will be used in order to clone the raw-data event while creating a single-event raw-reader within the online display/reco. For the moment it seems the best method to do the job. However it will not work in case of two processes (alieve + aliroot) and exchange of event data via sockets. The reason is that the fRawData is non-persistent member of AliRawEquipmentV2.